Fuel, thermal and surface properties of microwave-pyrolyzed biochars depend on feedstock type and pyrolysis temperature

Predicting Cd(II) adsorption capacity of biochar materials using typical machine learning models for effective remediation of aquatic environments

The screening and design of "green" biochar materials with high adsorption capacity play a pivotal role in promoting the sustainable treatment of Cd(II)-containing wastewater. In this study, six typical machine learning (ML) models, namely Linear Regression, Random Forest, Gradient Boosting Decision Tree, CatBoost, K-Nearest Neighbors, and Backpropagation Neural Network, were employed to accurately predict the adsorption capacity of Cd(II) onto biochars. A large dataset with 1051 data points was generated using 21 input variables obtained from batch adsorption experiments, including preparation conditions for biochar (2 features), physical properties of biochar (4 features), chemical composition of biochar (9 features), and adsorption experiment conditions (6 features). The rigorous evaluation and comparison of the ML models revealed that the CatBoost model exhibited the highest test R2 value (0.971) and the lowest RMSE (20.54 mg/g), significantly outperforming all other models. The feature importance analysis using Shapley Additive Explanations (SHAP) indicated that biochar chemical compositions had the greatest impact on model predictions of adsorption capacity (42.2 %), followed by adsorption conditions (37.57 %), biochar physical characteristics (12.38 %), and preparation conditions (7.85 %). The optimal experimental conditions optimized by partial dependence plots (PDP) are as follows: as high Cd(II) concentration as possible, C(%) of 33 %, N(%) of 0.3 %, adsorption time of 600 min, pyrolysis time of 50 min, biochar dosage of less than 2 g/L, O(%) of 42 %, biochar pH value of 11.2, and DBE of 1.15. This study unveils novel insights into the adsorption of Cd(II) and provides a comprehensive reference for the sustainable engineering of biochars in Cd(II) wastewater treatment.

The boom era of emerging contaminants: A review of remediating agricultural soils by biochar

Emerging contaminants (ECs) are widely sourced persistent pollutants that pose a significant threat to the environment and human health. Their footprint spans global ecosystems, making their remediation highly challenging. In recent years, a significant amount of literature has focused on the use of biochar for remediation of heavy metals and organic pollutants in soil and water environments. However, the use of biochar for the remediation of ECs in agricultural soils has not received as much attention, and as a result, there are limited reviews available on this topic. Thus, this review aims to provide an overview of the primary types, sources, and hazards of ECs in farmland, as well as the structure, functions, and preparation types of biochar. Furthermore, this paper emphasizes the importance and prospects of three remediation strategies for ECs in cropland: (i) employing activated, modified, and composite biochar for remediation, which exhibit superior pollutant removal compared to pure biochar; (ii) exploring the potential synergistic efficiency between biochar and compost, enhancing their effectiveness in soil improvement and pollution remediation; (iii) utilizing biochar as a shelter and nutrient source for microorganisms in biochar-mediated microbial remediation, positively impacting soil properties and microbial community structure. Given the increasing global prevalence of ECs, the remediation strategies provided in this paper aim to serve as a valuable reference for future remediation of ECs-contaminated agricultural lands.

Insights into CO2 and N2O emissions driven by applying biochar and nitrogen fertilizers in upland soil

Biochar and soil carbon sequestration hold promise in mitigating global warming by storing carbon in the soil. However, the interaction between biochar properties, soil carbon-nitrogen cycling, and nitrogen fertilizer application's impact on soil carbon-nitrogen balance remained unclear. Herein, we conducted batch experiments to study the effects and mechanisms of rice straw biochar application (produced at 300, 500, and 700 °C) on net greenhouse gas emissions (CO2, N2O, CH4) in upland soils under different forms of nitrogen fertilizers. The findings revealed that (NH4)2SO4 and urea significantly elevated soil carbon dioxide equivalent emissions, ranging from 28 to 61.7 kg CO2e/ha and 8.2 to 37.7 kg CO2e/ha, respectively. Conversely, KNO3 reduced soil CO2e emissions, ranging from 2.2 to 13.6 kg CO2e/ha. However, none of these three nitrogen forms exhibited a significant effect on CH4 emissions. The pyrolysis temperature of biochar was found negatively correlated with soil CO2 and N2O emissions. The alkaline substances presented in biochar pyrolyzed at 500-700 °C raised soil pH, increased the ratio of Gram-negative to Gram-positive bacteria, and enhanced the relative abundance of Sphingomonadaceae. Moreover, the co-application of KNO3 based nitrogen fertilizer and biochar increased the total carbon/inorganic nitrogen ratio and reduces the relative abundance of Nitrospirae. This series of reactions led to a significant increase in soil DOC content, meanwhile reduced soil CO2 emissions, and inhibited the nitrification process and decreased the emission of soil N2O. This study provided a scientific basis for the rational application of biochar in soil.

Unveiling the microwave heating performance of biochar as microwave absorber for microwave-assisted pyrolysis technology

Microwave (MW) heating has gained significant attention in food industries and biomass-to-biofuels through pyrolysis over conventional heating. However, constraints for promoting MW heating related to the use of different MW absorbers are still a major concern that needs to be investigated. The present study was conducted to explore the MW heating performance of biochar as a low-cost MW absorber for performing pyrolysis. Experiments were performed on biochar under different biochar dosing (25 g, 37.5 g, 50 g), MW power (400 W, 700 W, 1000 W), and particle sizes (6 mm, 8 mm, 10 mm). Results showed that MW power and biochar dosing significantly impacted average heating rate (AHR) from 17.5 to 65.4 °C/min at 400 W and 1000 W at 50 g. AHR first increased, and then no significant changes were obtained, from 37.5 to 50 g. AHR was examined by full factorial design, with 94.6% fitting actual data with predicted data. The model suggested that the particle size of biochar influenced less on AHR. Furthermore, microwave absorption efficiency and biochar weight loss were investigated, and microwave absorption efficiency decreased as MW power increased, which means 17.16% of microwave absorption efficiency was achieved at 400 W rather than 700 W and 1000 W. Biochar weight loss estimated by employing mass-balance analysis, 2-10.4% change in biochar weight loss was obtained owing to higher heating rates at higher powers and biochar dosing.

Biochar's dual role in greenhouse gas emissions: Nitrogen fertilization dependency and mitigation potential

Biochar was popularly used for reducing greenhouse gas (GHG) emissions in vegetable production, but using biochar does not necessarily guarantee a reduction in GHG emissions. Herein, it's meaningful to elucidate the intricate interplay among biochar properties, soil characteristics, and GHG emissions in vegetable production to provide valuable insights for informed and effective mitigation strategies. Therefore, in current research, a meta-analysis of 43 publications was employed to address these issues. The boost-regression analysis results indicated that the performance of biochar in inhibiting N2O emissions was most affected by the N application rate both in high and low N application conditions. Besides, biochar had dual roles and showed well performance in reducing GHG emissions under low N input (≤300 kg N ha-1), while having the opposite effect during high N input (>300 kg N ha-1). Specifically, applying biochar under low N fertilization input could obviously reduce soil N2O emissions, CO2 emissions, and CH4 emissions by 18.7 %, 17.9 %, and 16.9 %, respectively. However, the biochar application under high N fertilization input significantly (P < 0.05) increased soil N2O emissions, CO2 emissions, and CH4 emissions by 39.7 %, 43.0 %, and 27.7 %, respectively. Except for the N application rate, the soil pH, SOC, biochar C/N ratio, biochar pH, and biochar pyrolysis temperature are also the key factors affecting the control of GHG emissions in biochar-amended soils. The findings of this study will contribute to deeper insights into the potential application of biochar in regulating GHG under consideration of N input, offering scientific evidence and guidance for sustainable agriculture management.

Sustainable management of tea wastes: resource recovery and conversion techniques

As the demand for tea (Camellia sinensis) has grown across the world, the amount of biomass waste that has been produced during the harvesting process has also increased. Tea consumption was estimated at about 6.3 million tonnes in 2020 and is anticipated to reach 7.4 million tonnes by 2025. The generation of tea waste (TW) after use has also increased concurrently with rising tea consumption. TW includes clipped stems, wasted tea leaves, and buds. Many TW-derived products have proven benefits in various applications, including energy generation, energy storage, wastewater treatment, and pharmaceuticals. TW is widely used in environmental and energy-related applications. Energy recovery from low- and medium-calorific value fuels may be accomplished in a highly efficient manner using pyrolysis, anaerobic digestion, and gasification. TW-made biochar and activated carbon are also promising adsorbents for use in environmental applications. Another area where TW shows promise is in the synthesis of phytochemicals. This review offers an overview of the conversion procedures for TW into value-added products. Further, the improvements in their applications for energy generation, energy storage, removal of different contaminants, and extraction of phytochemicals have been reviewed. A comprehensive assessment of the sustainable use of TWs as environmentally acceptable renewable resources is compiled in this review.

Preparation of biochars by conventional pyrolysis of herbal waste and their potential application for adsorption and energy purposes

The nettle, sage, mint and lemon balm herbs were used for biochars preparation. The physicochemical parameters of obtained materials were related to the lignocellulose composition of the precursors. It has been proved that the content of mineral substance has a significant influence on development of surface area, whereas the amount of hemicellulose affects the content of surface functional groups. It has been also shown that the obtained biochars are characterized by great energy parameters. The higher heating values (HHV) of the carbonaceous materials are comparable to the typical energy sources. The greatest HHV value (20.36 MJ/kg) was characteristic for the biochar obtained by pyrolysis of the lemon balm. In addition, the biochars were used for ionic polymers adsorption from one- and two-components solutions. Despite the adsorbed amounts of macromolecules are not great is has been proved that polyethylenimine and polyacrylic acid have positive influence on their mutual adsorption.

Biotoxicity attenuation and the underlying physicochemical mechanism of biochar aged under simulated natural environmental conditions

Biochar (BC), with the benefits of enhancing soil fertility, absorbing heavy metals, carbon sequestration, and mitigating the greenhouse effect, has been extensively used for soil remediation. However, the long-term changes in the biotoxicity of BC under complex environmental conditions, which are the key factors influencing the sustainable application of BC in soil, are still unclear. Herein, the biotoxicity of BC aged with various processes, including dry‒wet cycle (DW) aging, freeze‒thaw cycle (FT) aging, ultraviolet irradiation (UV) aging, and low molecular weight organic acid (OA) aging, was systematically investigated by Escherichia coli (E. coli) culture experiments. The toxicity attenuation rate (%·week-1) was proposed to more concisely and clearly compare the influence of different aging methods on BC toxicity. The results indicated that after 5 weeks of aging, the toxicity attenuation rate during the four aging modes followed the order OA aging > FT aging > UV aging > DW aging. BC was nontoxic after 1 week of OA aging, 4 weeks of FT aging, 7 weeks of UV aging, and 14 weeks of DW aging. Spectroscopic characterizations revealed that humic acids in the dissolved organic matter of BC were the main reason for the biotoxicity. In addition, the attenuation of environmentally persistent free radicals on BC during aging was also an important factor for reducing environmental toxicity. This work provides insight into the detoxification mechanism of the BC aging process under ordinary environmental conditions and guidance for the safe application of BC in soil.

Power Generation from the Interaction of a Carbon Foam and Water

Understanding the interaction mechanisms between the surface of carbon-based materials and water is of great significance for the development of water-based energy storage and energy conversion devices. Herein, a self-supporting electric generator is demonstrated based on water adsorption on the surface of the carbon foam (CF) that works with various water resources, including deionized (DI) water, tap water, wastewater, and seawater. It is revealed that the dissociation of oxygen-containing groups on the surface of CF after water molecule adsorption leads to a reduction of the surface potential of the CF. Through surface modulation techniques such as reduction and oxidation, a balance has been uncovered between the oxygen content and conductivity for the high-performance CFs. The generator can generate an open-circuit voltage of approximately 0.6 V in natural seawater with a power density of up to 0.77 mW g-1. A high voltage of more than 2 V can be achieved easily by assembling components connected in series to drive electronic devices, such as a light-emitting diode (LED). This work demonstrates a simple and low-cost method for electricity harvesting, offering an additional option for self-powered devices.

Recent progress in TiO2-biochar-based photocatalysts for water contaminants treatment: strategies to improve photocatalytic performance

Toxic organic pollutants in wastewater have seriously damaged human health and ecosystems. Photocatalytic degradation is a potential and efficient tactic for wastewater treatment. Among the entire carbon family, biochar has been developed for the adsorption of pollutants due to its large specific surface area, porous skeleton structure, and abundant surface functional groups. Hence, combining adsorption and photocatalytic decomposition, TiO2-biochar photocatalysts have received considerable attention and have been extensively studied. Owing to biochar's adsorption, more active sites and strong interactions between contaminants and photocatalysts can be achieved. The synergistic effect of biochar and TiO2 nanomaterials substantially improves the photocatalytic capacity for pollutant degradation. TiO2-biochar composites have numerous attractive properties and advantages, culminating in infinite applications. This review discusses the characteristics and preparation techniques of biochar, presents in situ and ex situ synthesis approaches of TiO2-biochar nanocomposites, explains the benefits of TiO2-biochar-based compounds for photocatalytic degradation, and emphasizes the strategies for enhancing the photocatalytic efficiency of TiO2-biochar-based photocatalysts. Finally, the main difficulties and future advancements of TiO2-biochar-based photocatalysis are highlighted. The review gives an exhaustive overview of recent progress in TiO2-biochar-based photocatalysts for organic contaminants removal and is expected to encourage the development of robust TiO2-biochar-based photocatalysts for sewage remediation and other environmentally friendly uses.

Novel pretreatment with hydrogen peroxide enhanced microwave biochar for heavy metals adsorption: Characterization and adsorption performance

Hydrogen peroxide (HP) was used to pretreat wheat straw (WS) for microwave biochar production at 100-600 W, the physicochemical properties of pretreated WS and biochar products as well as heavy metals adsorption performance were investigated. Results showed that HP enhanced specific surface area (SSA) and pore volume (PV) of WS, and the largest SSA (190.35 m2 g-1) and PV (0.1493 cm3 g-1) of biochar were obtained at microwave powers of 600 W (HPWS600) and 500 W (HPWS500), respectively. HPWS500 showed maximum adsorption capacities, which were 57.56, 190.21, and 65.16 mg g-1 for Cd2+, Pb2+, and Cu2+, respectively. Solution pH values and cation concentrations exhibited significant effects on adsorption capacities of biochar. The pseudo-second-order kinetic and Langmuir isotherm models fitted better for metal adsorption process. The FTIR results suggested that chemisorption mechanisms including precipitation with carbonate and complexation with oxygen-containing functional groups might be predominant adsorption mechanisms. These results suggest that HP pretreatment has excellent potential for biochar production.

Production of Porous Biochar from Cow Dung Using Microwave Process

To valorize livestock manure, the present study investigated the production of biochar from cow dung (CD) by microwave pyrolysis. The pore properties and chemical characteristics of CD and CD-based biochar products were found to correlate with the process parameters like microwave power (300-1000 W) and residence time (5-20 min). The findings indicated that CD is an excellent biomass based on the richness of lignocellulosic constituents from the results of proximate analysis and thermogravimetric analysis (TGA). Higher calorific values were obtained at mild microwave conditions, giving the maximal enhancement factor 139% in comparison with the calorific value of CD (18.97 MJ/kg). Also, it can be concluded that the biochar product obtained at 800 W for a holding time of 5 min had the maximal BET surface area of 127 m2/g and total pore volume of 0.104 cm3/g, which were microporous and mesoporous in the nitrogen adsorption-desorption adsorption analysis. On the other hand, the CD-based biochar contained oxygen-containing functional groups and inorganic minerals based on the spectroscopic analyses by Fourier-transform infrared spectroscopy (FTIR) and energy-dispersive X-ray spectroscopy (EDS), thus featuring to be prone to hydrophilicity in aqueous solutions.

A review on the thermochemical treatments of biomass: Implications for hydrochar production and rare earth element recovery from hyperaccumulators

Phytomining is a promising method that employs hyperaccumulators to concentrate metals from various substrates. Many studies on phytomining have been reported in the literature, while how to recover metals from hyperaccumulators has not been well resolved, which is critical for developing a complete phytomining-based metal recovery process. The most straightforward approach is to combust hyperaccumulators and recover metals from the combustion residue. However, the combustion process results in significant waste and carbon emissions. In contrast to combustion, thermochemical treatments can convert the biomass of hyperaccumulators to valuable products, such as biochar, hydrochar, biocrudes, and biogas. Therefore, it is more sustainable to develop a process that combines thermochemical treatments for metal recovery from hyperaccumulators. To achieve this objective, a systematic and comprehensive understanding of product characteristics and metal fate during thermochemical processing is required. In this article, three emerging thermochemical technologies, i.e., microwave-assisted pyrolysis, hydrothermal processing, and microwave-assisted hydrothermal treatment, are systematically reviewed in terms of conversion mechanisms, merits, demerits, product characteristics, and metal fate. Significant findings reported in the literature on the effects of operating parameters on product characteristics and metal fate during thermochemical treatment of waste biomass, especially those from hyperaccumulators, were summarized. Due to limited studies on thermochemical treatments of rare earth element hyperaccumulators, this review is expanded to include hyperaccumulators of any metal species. Based on comparisons among the three emerging thermochemical treatment technologies, microwave-assisted hydrothermal pyrolysis is identified as the most promising approach that favors carbon product obtainment and REE recovery from hyperaccumulators.

Emerging applications of biochar: A review on techno-environmental-economic aspects

Biomass fast pyrolysis produces bio-oil and biochar achieving circular economy. This review explored the emerging applications of biochar. Biochar possesses the unique properties for removing emerging contaminants and for mine remediation, owing to its negative charge surface, high specific surface area, large pore size distribution and surface functional groups. Additionally, biochar could adsorb impurities such as CO2, moisture, and H2S to upgrade the biogas. Customizing pyrolysis treatments, optimizing the feedstock and pyrolysis operating conditions enhance biochar production and improve its surface properties for the emerging applications. Life cycle assessment and techno-economic assessment indicated the benefits of replacing conventional activated carbon with biochar.

Breakdown of biomass for energy applications using microwave pyrolysis: A technological review

The agricultural industry faces a permanent increase in waste generation, which is associated with the fast-growing population. Due to the environmental hazards, there is a paramount demand for generating electricity and value-added products from renewable sources. The selection of the conversion method is crucial to develop an eco-friendly, efficient and economically viable energy application. This manuscript investigates the influencing factors that affect the quality and yield of the biochar, bio-oil and biogas during the microwave pyrolysis process, evaluating the biomass nature and diverse combinations of operating conditions. The by-product yield depends on the intrinsic physicochemical properties of biomass. Feedstock with high lignin content is favourable for biochar production, and the breakdown of cellulose and hemicellulose leads to higher syngas formation. Biomass with high volatile matter concentration promotes the generation of bio-oil and biogas. The pyrolysis system's conditions of input power, microwave heating suspector, vacuum, reaction temperature, and the processing chamber geometry were influence factors for optimising the energy recovery. Increased input power and microwave susceptor addition lead to high heating rates, which were beneficial for biogas production, but the excess pyrolysis temperature induce a reduction of bio-oil yield.

Removal of Pb(II) and phosphorus in water by γ-Al2O3/biochar

In this work, we synthesized activated alumina biochar composites (γ-Al₂O₃/BC) by sol-gel method, which improved the problem that the surface charge of γ-Al₂O₃ was not conducive to the removal of heavy metal cation in a neutral solution, and then explored the feasibility of removing Pb(II) by γ-Al₂O₃/BC as well as reusing Pb-laden waste sludge to remove phosphorus (P) and its micro-adsorption mechanisms. The results show that the maximum adsorption capacity of γ-Al₂O₃/BC for Pb(II) is 182.48 mg/g, and the removing capacity of recycled Pb-laden slag for P also reaches 87.13 mg/g. It was found that the presence of Pb in the slag makes P removal more effective. In addition, in the process of P removal, the Pb in the slag will not be released, which will not cause secondary pollution to the water. The micro-adsorption mechanism of Pb(II) and P on the composites was investigated by XPS, XRD, and FTIR. It demonstrates that special functional groups such as hydroxy-aluminum, hydroxyl, and carboxyl groups can remove Pb(II) through strong surface complexation and electrostatic attraction. Furthermore, the removal mechanism of P from Pb-laden sludge includes chemisorption and complexation, and the precipitation of P and Pb on the adsorbent surface is the main reason for the removal of P. Therefore, it is feasible to further effectively remove P by using the waste biochar containing Pb. The idea of this paper provides a potential method for the reuse of waste adsorbent.

Activation methods increase biochar's potential for heavy-metal adsorption and environmental remediation: A global meta-analysis

Removal of heavy metals (HMs) by adsorption on biochar's surface has shown promising results in the remediation of contaminated soil and water. The adsorption capacity of biochar can be altered by pre- or post-pyrolysis activation; however, the effect of activation methods on biochar's adsorption capacity varies widely. Here, we conducted a meta-analysis to identify the most effective methods for activation to enhance HM removal by biochar using 321 paired observations from 50 published articles. Activation of biochar significantly improves the adsorption capacity and removal efficiency of HMs by 136 and 80 %, respectively. This study also attempts to find suitable feedstocks, pyrolysis conditions, and physicochemical properties of biochar for maximizing the effect of activation of biochar for HMs adsorption. Activation of agricultural wastes and under pyrolysis temperatures of 350-550 °C produces biochars that are the most effective for HM adsorption. Activation of biochars with a moderate particle size (0.25-0.80 mm), low N/C (<0.01) and H/C ratios (<0.03), and high surface area (> 100 m² g^-1) and pore volume (> 0.1 cm³ g^-1) are the most desirable characteristics for enhancing HM adsorption. We conclude that pre-pyrolysis activation with metal salts/oxides was the most effective method of enhancing biochar's potential for adsorption and removal of a wide range of HMs. The results obtained from this study can be helpful in choosing appropriate methods of activations and the suitable choice of feedstocks and pyrolysis conditions. This will maximize HM adsorption on biochar surfaces, ultimately benefiting the remediation of contaminated environments.

Value-added biochar production from microwave pyrolysis of peanut shell

In order to seek efficient resource utilization, the carbonization of agricultural and forestry wastes through microwave pyrolysis technology is an important research hotspot to develop value-added products. The main objective is to produce value-added biochar through microwave pyrolysis of peanut shell in this study. The product yields, functional groups, and biochar HHVs caused by pyrolysis temperature (400, 450, 500, 550, and 600 °C), microwave power (350, 450, 550, 650, and 750 W), and residence time (10, 20, 30, 40, and 50 min) were investigated, and the energy recovery efficiencies were evaluated. It was obtained that the biochar yield declined monotonously within the range of 45.3–86.0 wt% with the enhancement of pyrolysis temperature, microwave power, or residence time. The pyrolysis temperature of 400 °C, microwave power of 350 W, and residence time of 10 min generated the maximum biochar yield (86.0 wt%). The value-added biochar was obtained with high HHV (20.15–31.02 MJ/kg) and abundant oxygen-contained functional groups (C–O bonds and C=O bonds). The maximum energy recovery efficiency during the whole process reached 97.96%. The results indicated that the peanut shell could reach high biochar yield through microwave pyrolysis, and potentially be transformed into value-added products with high energy recovery efficiency.

Review of biochar production via crop residue pyrolysis: Development and perspectives

Worldwide surge in crop residue generation has necessitated developing strategies for their sustainable disposal. Pyrolysis has been widely adopted to convert crop residue into biochar with bio-oil and gas being two co-products. The review adopts a whole system philosophy and systematically summarises up-to-date knowledge of crop residue pyrolysis processes, influential factors, and biochar applications. Essential process design tools for biochar production e.g., cost-benefit analysis, life cycle assessment, and machine learning methods are also reviewed, which has often been overlooked in prior reviews. Important aspects include (a) correlating techno-economics of biochar production with crop residue compositions, (b) process operating conditions and management strategies, (c) biochar applications including soil amendment, fuel displacement, catalytic usage, etc., (d) data-driven modelling techniques, (e) properties of biochar, and (f) climate change mitigation. Overall, the review will support the development of application-oriented process pipelines for crop residue-based biochar.

Microwave biochar produced with activated carbon catalyst: Characterization and adsorption of heavy metals

Novel microwave biochar derived from wheat straw (WS) using a range of power levels, with activated carbon catalyst as microwave absorber, was produced, characterized and tested as adsorbent of three heavy metals (Pb²⁺, Cd²⁺, and Cu²⁺). The microwave biochar with the greatest specific surface area (156.09 m² g^-1) and total pore volume (0.0790 cm³ g^-1) were produced at 600 W (WS600) and 500 W (WS500) power level, respectively. Maximum adsorption capacities of WS500 to Pb²⁺, Cd²⁺ and Cu²⁺ were 139.44 mg g^-1, 52.92 mg g^-1, and 31.25 mg g^-1, respectively. Optimal pH value for heavy metal removal was at range of 5-6, and Pb²⁺ showed the strongest affinity in competitive adsorption experiments. The adsorption data were fitted better by pseudo-second-order model and Langmuir isotherm, indicating that adsorption process was mainly explained by monolayer adsorption, and chemical adsorption occupied important role. The predominant adsorption mechanisms of heavy metals on microwave pyrolysis biochar included complexation with oxygen-containing functional groups (i.e., carboxylic acid CO and -OH) and precipitation with carbonate. In addition, reused WS600 maintained 76.17% and 96.07% of their initial adsorption capacity for Cu²⁺ and Cd²⁺, respectively. These results suggest that microwave biochar produced with activated carbon catalyst has excellent potential for efficient use in the removal of heavy metals from waste water.

Sewage sludge derived biochar for environmental improvement: Advances, challenges, and solutions

With the rapid growth yield of global sewage sludge, rational and effective treatment and disposal methods are becoming increasingly needed. Biochar preparation is an attractive option for sewage sludge treatment, the excellent physical and chemical properties of sludge derived biochar make it an attractive option for environmental improvement. Here, the current application state of sludge derived biochar was comprehensively reviewed, and the advances in the mechanism and capacity of sludge biochar in water contaminant removal, soil remediation, and carbon emission reduction were described, with particular attention to the key challenges involved, e.g., possible environmental risks and low efficiency. Several new strategies for overcoming sludge biochar application barriers to realize highly efficient environmental improvement were highlighted, including biochar modification, co-pyrolysis, feedstock selection and pretreatment. The insights offered in this review will facilitate further development of sewage sludge derived biochar, towards addressing the obstacles in its application in environmental improvement and global environmental crisis.

Optimal nitrogen fertilizer, which determines straw properties, and pyrolysis temperatures produce desired-biochars that can be used as a soil amendment

This study investigated the straw harvested after nitrogen (N) fertilizer application levels (0, 75, 150 and 225 kg N hm^-2). The N fertilizer increased straw yield by 115.4-190.6%. In addition to N fertility, the pyrolysis temperatures (300, 500 and 700 °C) induced significant changes of the straw-derived biochar samples. The yield reduced from 41.4 wt% to 23.2 wt%, the residence time increased from 272 yr to 2194 yr, and the residual coefficient of organic C (F_perm) increased from 0.65 to 0.93 for the biochar samples as the temperature rising. The parameters of C sequestration were mainly affected by pyrolysis temperature. The N + P₂O₅+K₂O content (5.6-8.8%) of the biochar samples was more in the 500 °C treatment. The characteristics of nutrient supply were affected by both the N fertility and pyrolysis temperature. The N fertilizer rate of 150 kg N hm^-2 in the soil for wheat straw, together with the 500 °C treatment induces the best nutrient donor and C sequestration after biochar incorporation into the soil.

Production of biochar from crop residues and its application for anaerobic digestion

Anaerobic digestion (AD) is a viable and cost-effective method for converting organic waste into usable renewable energy. The efficiency of organic waste digestion, nonetheless, is limited due to inhibition and instability. Accordingly, biochar is an effective method for improving the efficiency of AD by adsorbing inhibitors, promoting biogas generation and methane concentration, maintaining process stability, colonizing microorganisms selectively, and mitigating the inhibition of volatile fatty acids and ammonia. This paper reviews the features of crop waste-derived biochar and its application in AD systems. Four critical roles of biochar in AD systems were identified: maintaining pH stability, promoting hydrolysis, enhancing the direct interspecies electron transfer pathway, and supporting microbial development. This work also highlights that the interaction between biochar dose, amount of organic component in the substrate, and inoculum-to-substrate ratio should be the focus of future research before deploying commercial applications.

Energy-efficient biochar production for thermal backfill applications

The function of engineered thermal backfills surrounding underground pipelines of the crude oil industry is to prohibit heat migration for the design period of 25 to 50 years. Biochar is suitable for reconstituting standard thermal backfill material since it is biochemically inert and has a low heat conductivity. However, the preparation of biochar from biomass involves an energy-intensive pyrolysis process. This study aims to make biochar production energy-efficient via optimizing the pyrolysis temperatures, specifically for thermal backfill applications. Ten distinct biochars were prepared by pyrolyzing two waste biomass, i.e., water hyacinth (WH) and sugarcane bagasse (SB), at temperatures ranging from 300 to 700 °C. The biochars were assessed based on their thermal conductivity, energy consumption, yield, and stability in soil for the design period. The thermal conductivity of produced biochars varied in a narrow range of 0.10 to 0.13 W m^-1 K^-1 with different pyrolysis temperatures, which is possibly due to marginal differences in their microstructure, mineralogy, and physicochemical properties. The findings revealed that the biochar produced at lowest pyrolysis temperature (300 °C) consumed least energy and produced maximum yield. However, it was not suitable for thermal backfill applications due to its inadequate carbon stability in soil. Therefore, the current study recommends a pyrolysis temperature of 400 °C for thermal backfill applications. The recommended pyrolysis temperature was found to be at least 60% energy efficient in comparison to pyrolysis at 700 °C for both the feedstocks. This study provides crucial insight into the role of pyrolysis temperature for tailoring biochar production for intended applications.

Pyrolysis of cellulose: Correlation of hydrophilicity with evolution of functionality of biochar

Biochar is a carbonaceous material from pyrolysis of biomass, the application of which is governed by its various properties such as the distribution of the functionalities and the associated hydrophilic/hydrophobic nature. This study particularly focused on the correlation of functionalities of biochar with its polarities by conducting the pyrolysis of cellulose from 200 to 700 °C and the characterization of the biochar. The results demonstrated that -OH, instead of CO or C-O-C, played decisive roles in formation of the biochar with hydrophilic surface. The results showed that the maximum of -OH abundance and the aliphatic CH was reached at 440 °C. The significant transition of oxygen-rich functionalities to carbon-rich functionalities occurred in the temperature from 460 to 700 °C. The dominance of aromatization process above this temperature range resulted in the significant increase of hydrophobicity of the biochar. The hydrophilic surface was of importance for the use of biochar as support for promoting the dispersion of Cu in Cu/biochar by generating the bonding sites for chelating with Cu²⁺.

Catalytic pyrolysis of lignocellulosic biomass for bio-oil production: A review

Catalytic pyrolysis has been widely explored for bio-oil production from lignocellulosic biomass owing to its high feasibility and large-scale production potential. The aim of this review was to summarize recent findings on bio-oil production through catalytic pyrolysis using lignocellulosic biomass as feedstock. Lignocellulosic biomass, structural components and fundamentals of biomass catalytic pyrolysis were explored and summarized. The current status of bio-oil yield and quality from catalytic fast pyrolysis was reviewed and presented in the current review. The potential effects of pyrolysis process parameters, including catalysts, pyrolysis conditions, reactor types and reaction modes on bio-oil production are also presented. Techno-economic analysis of full-scale commercialization of bio-oil production through the catalytic pyrolysis pathway was reviewed. Further, limitations associated with current practices and future prospects of catalytic pyrolysis for production of high-quality bio-oils were summarized. This review summarizes the process of bio-oil production from catalytic pyrolysis and provides a general scientific reference for further studies.

Optimization of the raw materials of biochars for the adsorption of heavy metal ions from aqueous solution

In this paper, the material types were preferentially selected for different kinds of heavy metals, the effect of calcination temperatures on metal adsorption was investigated, and the adsorption mechanism was explored and summarized. The results show that the pseudo-first-order kinetic was better to fit the adsorption of heavy metals. The biomass type and pyrolysis temperature had an effect on the rate at which heavy metals were absorbed. Based on their adsorbed capacity, 350 °C pyrolyzed corn stalk char, 550 °C pyrolyzed peanut shell char, 450 °C pyrolyzed peanut shell char, 450 °C pyrolyzed peanut shell char, and 500 °C pyrolyzed wheat stalk char were shown to be the best adsorbents for Cr₂O₇^2-, Cd²⁺, Cu²⁺, Zn²⁺ and Pb²⁺, respectively. The largest adsorption rate were in the order of Cr⁶⁺ (Cr₂O₇^2-, 0.5380 /min) > Pb²⁺ (0.2276 /min) > Cd²⁺ (0.1354 /min) > Cu²⁺ (0.1273 /min) > Zn²⁺ (0.1000 /min), which might be positively related to the ion radius. Meanwhile, the yield of biomass decreased from 43.9% to 29.0% with the increase of pyrolysis temperature from 350 °C to 550 °C. In addition, the specific surface area and functional groups of the biochar, as well as the ionic radius and initial concentration of heavy metals affect the adsorption rate.

The composition, energy, and carbon stability characteristics of biochars derived from thermo-conversion of biomass in air-limitation, CO2, and N2 at different temperatures

This study systemically investigated the characteristics of biochars derived from thermo-conversion of pine sawdust and wheat straw in air-limitation, CO2, and N2 atmospheres at the temperatures of 300-750 °C. Meanwhile, their energy and C stability parameters were also evaluated here. The results showed that biochar produced in air-limitation had less yield, fixed C and bulk C, as well as more volatile matter and inorganic elements than that produced in CO2 and N2. Biochars derived from thermo-conversion of pine sawdust in CO2 and N2 at 450-750 °C had the greatest energy densification ratios (EDR) (range: 1.40-1.61), because pine sawdust contained more lignin than wheat straw, and the thermo-conversion of lignin in N2 and CO2 at 450-750 °C benefited for the formation of fixed C. Recalcitrance potential (R50) results showed that the biochars produced in CO2 and N2 at 600-750 °C had the highest carbon stability (R50: 0.54-0.64) for given biomass, owing to the thermo-conversion of biomass in CO2 and N2 at 600-750 °C preferring to form the organic C with high aromaticity and low polarity. Nonetheless, thermo-conversion of biomass in CO2 and N2 at 300 °C presented the greatest C sequestration potential, owing to high biochar yields under these conditions. Generally, the temperature-variability for the composition, EDR, and C sequestration potential followed the order: air-limitation > CO2 > N2, whereas carbon stability presented an opposite order. Our results contributed to selecting the appropriate atmosphere to optimize the properties and performances of biochars.

Feedstock type drives surface property, demineralization and element leaching of nitric acid-activated biochars more than pyrolysis temperature

Nitric acid activation (NA-A) effects on the surface properties, mineral phases and element compositions of biochars produced from four feedstocks at three temperatures were evaluated. NA-A increased biochar thermal stability, but its effect on ash content and surface area was feedstock-dependent, with ash content in manure pellet biochars less affected due to a high quartz content. Apart from the manure pellet biochars and the sawdust biochar produced at 400 °C, NA-A decreased the surface area of biochars by up to 100% due to reduced pore volume. Nitric acid significantly leached elements such as potassium from biochars due to protonation and their reactions with several mineral phases, such as sylvite, on the biochars (p < 0.05). This study shows that mineral phases and element compositions of nitric acid-activated biochars were driven more by the feedstock type than the pyrolysis temperature and the derived biochars would be poor adsorbents.

Recent advances of thermochemical conversion processes for biorefinery

Lignocellulosic biomass is one of the most promising renewable resources and can replace fossil fuels via various biorefinery processes. Through this study, we addressed and analyzed recent advances in the thermochemical conversion of various lignocellulosic biomasses. We summarized the operation conditions and results related to each thermochemical conversion processes such as pyrolysis (torrefaction), hydrothermal treatment, gasification and combustion. This review indicates that using thermochemical conversion processes in biorefineries is techno-economically feasible, easy, and effective compared with biological processes. The challenges experienced in thermochemical conversion processes are also presented in this study for better understanding the future of thermochemical conversion processes for biorefinery. With the aid of artificial intelligence and machine learning, we can reduce time-consumption and experimental work for bio-oil production and syngas production processes.

Biochar for agronomy, animal farming, anaerobic digestion, composting, water treatment, soil remediation, construction, energy storage, and carbon sequestration: a review

In the context of climate change and the circular economy, biochar has recently found many applications in various sectors as a versatile and recycled material. Here, we review application of biochar-based for carbon sink, covering agronomy, animal farming, anaerobic digestion, composting, environmental remediation, construction, and energy storage. The ultimate storage reservoirs for biochar are soils, civil infrastructure, and landfills. Biochar-based fertilisers, which combine traditional fertilisers with biochar as a nutrient carrier, are promising in agronomy. The use of biochar as a feed additive for animals shows benefits in terms of animal growth, gut microbiota, reduced enteric methane production, egg yield, and endo-toxicant mitigation. Biochar enhances anaerobic digestion operations, primarily for biogas generation and upgrading, performance and sustainability, and the mitigation of inhibitory impurities. In composts, biochar controls the release of greenhouse gases and enhances microbial activity. Co-composted biochar improves soil properties and enhances crop productivity. Pristine and engineered biochar can also be employed for water and soil remediation to remove pollutants. In construction, biochar can be added to cement or asphalt, thus conferring structural and functional advantages. Incorporating biochar in biocomposites improves insulation, electromagnetic radiation protection and moisture control. Finally, synthesising biochar-based materials for energy storage applications requires additional functionalisation.

A review of biochar in anaerobic digestion to improve biogas production: Performances, mechanisms and economic assessments

Anaerobic digestion (AD) technology still faces some challenges including low methane productivity, instable operation efficiency and undesired refractory substances degradation. Biochar has recently been recognized as a promising alternative addition in AD process to enhance methane production. Based on VOSviewer analysis, this review presents a comprehensive summarizing of the applications, performances, and economies of biochar strategies in AD system. Firstly, typical production processes of biochar and its main characteristics including adsorption and immobilization ability, buffering ability and electron transfer ability were evaluated. Then, the applications of biochar in AD and its improving effects on biogas production/purification were summarized. Accordingly, the corresponding mechanisms of biochar addition in AD for digestion efficiency improvement were elucidated. Finally, the economic and environmental feasibilities of application biochar in AD, as well as prospective future studies were summarized. Through an overview of biochar in AD system, this paper aims to promote its widely practical applications.

Does biochar accelerate the mitigation of greenhouse gaseous emissions from agricultural soil? - A global meta-analysis

Greenhouse gaseous (GHGs) emissions from cropland soils are one of the major contributors to global warming. However, the extent and pattern of these climatic breakdowns are usally determined by the management practices in-place. The use of biochar on cropland soils holds a great promise for increasing the overall crop productivity. Nevertheless, biochar application to agricultural soils has grown in popularity as a strategy to off-set the negative feedback associated with agriculture GHGs emissions, i.e., CO₂ (carbon dioxide), CH₄ (methane), and N₂O (nitrous oxide). Despite increasing efforts to uncover the potential of biochar to mitigate the farmland GHGs effects, there has been little synthesis of how different types of biochar affect GHGs fluxes from cropland soils under varied experimental conditions. Here, we presented a meta-analysis of the interactions between biochar and GHGs emissions across global cropland soils, with field experiments showing the strongest GHG mitigation potential, i.e. CO₂ (RR = -0.108) and CH₄ (RR = -0.399). The biochar pyrolysis temperature, feedstock, C: N ratio, and pH were also found to be important factors influencing GHGs emissions. A prominent reduction in N₂O (RR = -0.13) and CH₄ (RR = -1.035) emissions was observed in neutral soils (pH = 6.6-7.3), whereas acidic soils (pH ≤ 6.5) accounted for the strongest mitigation effect on CO₂ compared to N₂O and CH₄ emissions. We also found that a biochar application rate of 30 t ha^-1 was best for mitigating GHGs emissions while achieving optimal crop yield. According to our meta-analysis, maize crop receiving biochar amendment showed a significant mitigation potential for CO₂, N₂O, and CH₄ emissions. On the other hand, the use of biochar had shown significant impact on the global warming potential (GWP) of total GHGs emissions. The current data synthesis takes the lead in analyzing emissions status and mitigation potential for three of the most common GHGs from cropland soils and demonstrates that biochar application can significantly reduce the emissions budget from agriculture.

Optimization of process parameters of self-purging microwave pyrolysis of corn cob for biochar production

Microwave pyrolysis offers rapid and low-cost technology to upgrade agro-forestry residues to high-value products. I-optimal experimental design was used to determine the optimal combination of microwave power and exposure time to maximize biochar yield from corn cob. A validation experiment at optimal conditions of 600 W and 6.9 min produced an average yield of 56.98% on a dry and ash-free basis, agrees with the predicted value (3.43% error) and confirms the adequacy of the model yield equation. Characterization of biochar product revealed an organized mesoporous structure with a carbon content of 62.68%, surface area of 3.05 m2/g, pore volume of 0.003 cm3/g, capacitance range of 27.14-53.99 μF/g, energy density range of 6.0 × 10-7 - 1.2 × 10-6 Wh/kg, and power density range of 9.4 × 10-4 - 2.49 × 10-3 W/kg. The biochar produced would require further process to be considered for various industrial applications.

Biochar modulates mineral nitrogen dynamics in soil and terrestrial ecosystems: A critical review

Biochar, over the last two decades, has become the focal point of agro-environmental research given its unique functionality, cost-effectiveness and recyclability potentials. It has been studied intensively as an efficient scavenger for the decontamination of several organic and inorganic pollutants. However, the ability of biochar to modulate nitrogen (N) dynamics in soil and terrestrial ecosystems remains controversial. This work deliberates on the premise that biochar functionality enables maximizing N use efficiency by reducing the potential losses induced by volatilization/emission and runoff/leaching as well as stimulating available N inputs derived from symbiotic and nonsymbiotic biological nitrogen fixation (BNF) and N mineralization/retention. For this purpose, we carried out a critical review on different intriguing dimensions surrounding the potentiality of biochar to modulate the complicated reactions of soil N cycle with emphasis on its pros and cons. Previous studies in the literature have shown contradictory results with a noticeable significant effect of biochar toward stimulating available N inputs and reducing its losses under short-term laboratory experimentations. However, long-term field investigations have indicated minimal or negative effects in this regard. Furthermore, some of the experimentations lack appropriate controls or fail to account for inputs or losses associated with biochar particles. It is thus of great importance to contextualise lab-scale experimentations based on real field data to provide a holistic approach for understanding the complicated reactions responsible for modulating N cycle in the charosphere. Additionally, biochar functionalization should be highlighted in the foreseeable research to develop fit-for-purpose forms tailored in agro-environmental applications.

Biochar heavy metal removal in aqueous solution depends on feedstock type and pyrolysis purging gas

The effectiveness of biochar as a sorptive material to remove contaminants, particularly heavy metals, from water is dependent on biomass type and pyrolysis condition. Biochars were produced from pulp mill sludge (PMS) and rice straw (RS) with nitrogen (N₂) or carbon dioxide (CO₂) as the purging gas. The sorptive capacity of the biochars for cadmium(II), copper(II), nickel(II) and lead(II) was studied. The heavy metal adsorption capacity was mainly affected by biomass type, with biochars adsorption capacities higher for lead(II) (109.9-256.4 mg g^-1) than for nickel(II) (40.2-64.1 mg g^-1), cadmium(II) (29.5-42.7 mg g^-1) and copper(II) (18.5-39.4 mg g^-1) based on the Langmuir adsorption model. The highest lead(II) adsorption capacities for PMS and RS biochars were 256.4 and 133.3 mg g^-1, respectively, when generated using N₂ as the purging gas. The corresponding lead(II) adsorption capacities were 250.0 and 109.9 mg g^-1, respectively, when generated using CO₂ as the purging gas. According to the intraparticle diffusion model, 30-62% of heavy metal adsorption was achieved in 1 h; film diffusion was the rate-dominating step, whereas pore diffusion was a rate-limiting step. Ion exchange and complexation between heavy metals and biochar surface functional groups such as carbonyl and hydroxyl groups were effective mechanisms for heavy metal sorption from the aqueous solution. We conclude that proper selection of both the feedstock type and the purging gas is important in designing biochars for the effective removal of potentially toxic metals from wastewater.

Lead(II) adsorption on microwave-pyrolyzed biochars and hydrochars depends on feedstock type and production temperature

Adsorption of lead(II) using carbon-rich chars is an environmentally sustainable approach to remediate lead(II) pollution in industrial wastewater. We studied mechanisms for lead(II) adsorption from synthetic wastewater by biochars produced by microwave-assisted pyrolysis and hydrochars by hydrothermal carbonization at three temperatures using four feedstocks. Lead(II) adsorption was highest (165 mg g^-1) for canola straw biochar produced at 500 °C. Except for chars derived from sawdust, biochars outperformed hydrochars for lead(II) adsorption due to changes in solution pH driven by char pH. As char production temperature increased, lead(II) adsorption decreased in hydrochar mainly due to interaction with aromatic carbon but increased in biochar due to precipitation as hydrocerussite and lead oxide phosphate. Lead(II) adsorption also occurred via surface complexation and cation-ᴨ interaction, as the data fitted well to Freundlich, Langmuir and Temkin models, and the pseudo-first and pseudo-second order kinetic models, depending on feedstock type and production temperature. More than 80% of lead(II) adsorption occurred in the first 3 h for both types of chars; with a few exceptions, adsorption continued for almost 24 h. We conclude that production method, production temperature and feedstock type are crucial factors to consider in designing chars as adsorbents for removing lead(II) from wastewater.

Carbonization temperature and feedstock type interactively affect chemical, fuel, and surface properties of hydrochars

The hydrothermal carbonization (HTC) process that converts wet/dry biomass to hydrochars (for use as solid fuels or adsorbents) needs to be optimized. We investigated the interactive effects of feedstock type and HTC temperature on chemical, fuel, and surface properties of hydrochars produced from lignocellulosic (canola straw, sawdust and wheat straw) and non-lignocellulosic feedstocks (manure pellet) at 180, 240 and 300 °C. Increased HTC temperature decreased hydrochar yield and surface functional group abundance, but increased hydrochar thermal stability due to increased devolatilization and carbonization. Hydrochar surface area ranged from 1.76 to 30.59 m²g^-1, much lower than those of commercially available activated carbon. Lignocellulosic and non-lignocellulosic feedstocks were distinctly affected by HTC temperature due to variable carbonization from ashing. Hydrochars produced from lignocellulosic biomass at 240 and 300 °C resembled high-volatile bituminous coal. Hydrochars should be designed for specific applications such as fuels by selecting specific feedstock types and carbonization conditions.

Application of Biochar in Stormwater Treatment: Experimental and Modeling Investigation

This research investigated the removal of heavy metal ions (Cd, Cu, Pb, and Zn) and metalloid (As) common to stormwater runoff onto biochar-based media arranged in multiple configurations. Laboratory scale column experiments were conducted to quantify heavy metal removal efficiencies using sand, biochar, and nZVI-modified biochar (BC-nZVI) in four media configurations: a homogeneous mixture of sand and biochar (BCM); biochar layered in sand (BCL); BC-nZVI layered in sand (BCZ); and sand as a control. An inverse modeling approach was implemented to measured moisture and experimental data to determine media hydraulic parameters (θr, θs, α, n and Ks) and adsorption coefficients. The experiment was conducted using laboratory synthesized stormwater over 200 days at a rate of 5 cm/day. BCZ exhibited an excellent removal (99%) of As due to the high attachment to nZVI, via surface complexations. Biochar with abundant surface oxygen functional groups exhibited a great (99%) removal of Cd and Zn in both BCL and BCM columns. Water contents were observed 66.0, 44.3, 41.4, and 7.2% for BCL, BCM, BCZ, and sand, respectively. The attachment coefficients varied from 21.5 to 44.9, 16.1 to 19.3, 18.8 to 26.0, and 9.6 to 19.9 L/kg for BCL, BCM, BCZ, and sand, respectively. This study’s output provides useful information for stormwater management practices.