Semi-batch cultivation of Chlorella sorokiniana AK-1 with dual carriers for the effective treatment of full strength piggery wastewater treatment

Upcycling food waste as a low-cost cultivation medium for Chlorella sp. microalgae

BACKGROUND

Global food loss and waste have raised environmental concerns regarding the generation of greenhouse gases (e.g., carbon dioxide and methane gas), which directly contribute to climate change. To address these concerns, the present research aims to upcycle food waste into an alternative culture medium for the cultivation of microalgae. Various parameters including pretreatment of food waste (i.e., autoclave and non-autoclave), concentration of food waste culture medium (i.e., 10%, 30%, 50%, 70%, 90% and 100%), harvesting efficiency and biochemical compounds of Chlorella sp. microalgae were carried out.

RESULTS

Based on the preliminary findings, the highest biomass concentration obtained from 10% food waste culture medium in the autoclave for Chlorella sp., including strains FSP-E, ESP-31 and CY-1, were 2.869 ± 0.022, 2.385 ± 0.018 and 0.985 ± 0.0026 g L-1, respectively. Since Chlorella vulgaris FSP-E exhibited the highest biomass concentration, this microalgal strain was selected to examine the subsequent parameters. Cultivation of C. vulgaris FSP-E in 100FW achieves a biomass concentration of 4.465 ± 0.008 g L-1 with biochemical compounds of 6.94 ± 1.396, 248.24 ± 0.976 and 406.23 ± 0.593 mg g-1 for lipids, carbohydrates and proteins, respectively.

CONCLUSION

This study shows that using food waste as an alternative culture medium for C. vulgaris FSP-E can achieve substantial biomass productivity and biochemical content. This research work would contribute to the concept of net zero emission and transitioning toward a circular bioeconomy by upcycling food waste as an alternative culture medium for the cultivation of microalgae. © 2024 Society of Chemical Industry.

Effects of microalgal (Tetradesmus obliquus MCX38) attachment on photobioreactor treatment efficiency of raw swine wastewater

Attachment of microalgae on the inner surfaces of photobioreactors impacts the efficiency of swine wastewater treatment by reducing the light intensity, which has been overlooked in previous studies. This study investigated the relationship between microalgal attachment biomass and light intensity in photobioreactors, determined the optimal attachment time for effective pollutant removal, and clarified the mechanisms of microalgal attachment in swine wastewater. After 9 days of treatment, the attached biomass in the photobioreactor increased from 0 to 6.4 g/m2, decreasing the light intensity from 2,000 to 936 lux. At the 24 h optimal attachment time, the concentrations of chemical oxygen demand, ammonia nitrogen, and total phosphorus decreased from 2725.1, 396.4, and 87.2 mg/L to 361.2, 4.9, and 0.8 mg/L, respectively. Polysaccharides in the extracellular polymeric substances released by microalgae play a significant role in facilitating microalgae attachment. Optimizing the microalgal attachment time within photobioreactors effectively mitigates pollutant concentrations in swine wastewater.

Immobilized microalgae: principles, processes and its applications in wastewater treatment

Microalgae have emerged as potential candidates for biomass production and pollutant removal. However, expensive biomass harvesting, insufficient biomass productivity, and low energy intensity limit the large-scale production of microalgae. To break through these bottlenecks, a novel technology of immobilized microalgae culture coupled with wastewater treatment has received increasing attention in recent years. In this review, the characteristics of two immobilized microalgae culture technologies are first presented and then their mechanisms are discussed in terms of biofilm formation theories, including thermodynamic theory, Derjaguin-Landau-Verwei-Overbeek theory (DLVO) and its extended theory (xDLVO), as well as ionic cross-linking mechanisms in the process of microalgae encapsulated in alginate. The main factors (algal strains, carriers, and culture conditions) affecting the growth of microalgae are also discussed. It is also summarized that immobilized microalgae show considerable potential for nitrogen and phosphorus removal, heavy metal removal, pesticide and antibiotic removal in wastewater treatment. The role of bacteria in the cultivation of microalgae by immobilization techniques and their application in wastewater treatment are clarified. This is economically feasible and technically superior. The problems and challenges faced by immobilized microalgae are finally presented.

Enhancement of sulfide removal and sulfur recovery in piggery wastewater via lighting-anaerobic digestion with bioaugmentation of phototrophic green sulfur bacteria

Anaerobic pig wastewater treatment commonly generates high sulfide concentrations in the treated wastewater. This study aims to apply phototrophic green sulfur bacteria (PGB) to promote sulfide removal in lighting-anaerobic digestion (lighting-AD) treating pig wastewater. Initially, batch AD tests of pig wastewater with/without PGB addition were carried out under dark (D) and light (L) conditions. The results showed that the lighting-AD with PGB gave a higher growth rate of PGB (0.056 h-1) and the highest COD/sulfide removals as compared to the dark-AD with PGB and lighting-AD solely. More experiments under various light intensities were performed in order to find an optimal intensity for PGB growth concurrently with metagenomic changes concerning treatment performance. It appeared that sulfide removal rates had increased as increasing light intensity up to 473 lx by giving the highest rate of 12.5 mg L-1 d-1 with the highest sulfur element content in the biomass. Contrastingly, many PGB species disappeared at 1350 lx exposure subsequently sharply decreasing the rate of sulfide removal. In sum, the application of low light intensities of 400-500 lx with bioaugmented PGB could promote PGB growth and activity in sulfide removal in pig wastewater in the lighting of the AD process.

Microalgal lutein: Advancements in production, extraction, market potential, and applications

Lutein, a bioactive xanthophyll, has recently attracted significant attention for numerous health benefits, e.g., protection of eye health, macular degeneration, and acute and chronic syndromes etc. Microalgae have emerged as the best platform for high-value lutein production with high productivity, lutein content, and scale-up potential. Algal lutein possesses numerous bioactivities, hence widely used in pharmaceuticals, nutraceuticals, aquaculture, cosmetics, etc. This review highlights advances in upstream lutein production enhancement and feasible downstream extraction and cell disruption techniques for a large-scale lutein biorefinery. Besides bioprocess-related advances, possible solutions for existing production challenges in microalgae-based lutein biorefinery, market potential, and emerging commercial scopes of lutein and its potential health applications are also discussed. The key enzymes involved in the lutein biosynthesizing Methyl-Erythritol-phosphate (MEP) pathway have been briefly described. This review provides a comprehensive updates on lutein research advancements covering scalable upstream and downstream production strategies and potential applications for researchers and industrialists.

Natural Carotenoids: Recent Advances on Separation from Microbial Biomass and Methods of Analysis

Biotechnologically produced carotenoids occupy an important place in the scientific research. Owing to their role as natural pigments and their high antioxidant properties, microbial carotenoids have been proposed as alternatives to their synthetic counterparts. To this end, many studies are focusing on their efficient and sustainable production from renewable substrates. Besides the development of an efficient upstream process, their separation and purification as well as their analysis from the microbial biomass confers another important aspect. Currently, the use of organic solvents constitutes the main extraction process; however, environmental concerns along with potential toxicity towards human health necessitate the employment of "greener" techniques. Hence, many research groups are focusing on applying emerging technologies such as ultrasounds, microwaves, ionic liquids or eutectic solvents for the separation of carotenoids from microbial cells. This review aims to summarize the progress on both the biotechnological production of carotenoids and the methods for their effective extraction. In the framework of circular economy and sustainability, the focus is given on green recovery methods targeting high-value applications such as novel functional foods and pharmaceuticals. Finally, methods for carotenoids identification and quantification are also discussed in order to create a roadmap for successful carotenoids analysis.

Immobilized microalgal system: An achievable idea for upgrading current microalgal wastewater treatment

Efficient wastewater treatment accompanied by sustainable "nutrients/pollutants waste-wastewater-resources/energy nexus" management is acting as a prominent and urgent global issue since severe pollution has occurred increasingly. Diverting wastes from wastewater into the value-added microalgal-biomass stream is a promising goal using biological wastewater treatment technologies. This review proposed an idea of upgrading the current microalgal wastewater treatment by using immobilized microalgal system. Firstly, a systematic analysis of microalgal immobilization technology is displayed through an in-depth discussion on why using immobilized microalgae for wastewater treatment. Subsequently, the main technical approaches employed for microalgal immobilization and pollutant removal mechanisms by immobilized microalgae are summarized. Furthermore, from high-tech technologies to promote large-scale production and application potentials in diverse wastewater and bioreactors to downstream applications lead upgradation closer, the feasibility of upgrading existing microalgal wastewater treatment into immobilized microalgal systems is thoroughly discussed. Eventually, several research directions are proposed toward the future immobilized microalgal system for microalgal wastewater treatment upgrading. Together, it appears that using immobilization for further upgrading the microalgae-based wastewater treatment can be recognized as an achievable alternative to make microalgal wastewater treatment more realistic. The information and perspectives provided in this review also offer a feasible reference for upgrading conventional microalgae-based wastewater treatment.

Bioaugmentation with Tetrasphaera to improve biological phosphorus removal from anaerobic digestate of swine wastewater

Tetrasphaera-enhanced biological phosphorus removal (T-EBPR) was developed by augmenting conventional EBPR (C-EBPR) with Tetrasphaera to improve phosphorus removal from anaerobic digestate of swine wastewater. At influent total phosphorus (TP) concentrations of 45-55 mg/L, T-EBPR achieved effluent TP concentration of 4.17 ± 1.02 mg/L, 54 % lower than that in C-EBPR (8.98 ± 0.76 mg/L). The enhanced phosphorous removal was presumably due to the synergistic effect of Candidatus Accumulibacter and Tetrasphaera occupying different ecological niches. Bioaugmentation with Tetrasphaera promoted the polyphosphate accumulation metabolism depending more on the glycolysis pathway, as evidenced by an increase in intracellular storage compounds of glycogen and polyhydroxyalkanoates by 0.87 and 0.34 mmol C/L, respectively. The enhanced intracellular storage capacity was coincidentally linked to the increase in phosphorus release and uptake rates by 1.23 and 1.01 times, respectively. These results suggest bioaugmentation with Tetrasphaera could be an efficient way for improved phosphorus removal from high-strength wastewater.

A novel two-stage process for the effective treatment of swine wastewater using Chlorella sorokiniana AK-1 based algal-bacterial consortium under semi-continuous operation

This study aimed at developing an eco-friendly and effective treatment for swine wastewater (SWW) using a designer microalgae-bacteria consortium. A functional algal bacterial consortium was developed with SWW-derived bacteria and Chlorella sorokiniana AK-1. Light intensity (300 µmol/m²/s) and inoculum size (0.15 and 0.2 g/L for microalgae and bacteria) were optimized. Semi-batch operation treating 50 % SWW resulted in a COD, BOD, TN, and TP removal efficiency of 81.1 ± 0.9 %, 97.0 ± 0.7 %, 90.6 ± 1.6 % and 91.3 ± 1.1 %, respectively. A novel two-stage process with an initial bacterial start-up stage followed by microalgal inoculation was applied for attaining stable organic carbon removal, in addition to satisfactory TN and TP removal. Full strength SWW was treated with this strategy with COD, BOD, TN, and TP removal efficiencies of 72.1 %, 94.9 %, 88 %, and 94.6 %, respectively. The biomass consisted of 36 % carbohydrates, indicating a potential feedstock for biochar production. In addition, the effluent met the standards for effluent discharge in Taiwan.

Prospective review on bioelectrochemical systems for wastewater treatment: Achievements, hindrances and role in sustainable environment

Bioelectrochemical systems (BESs) are a relatively new arena for producing bioelectricity, desalinating sea water, and treating industrial effluents by removing organic matter. Microbial electrochemical technologies (METs) are promising for obtaining value-added products during simultaneous remediation of pollutants from wastewater. The search for more affordable desalination technology has led to the development of microbial desalination cells (MDCs). MDC combines the operation of microbial fuel cells (MFC) with electrodialysis for water desalination and energy generation. It has received notable interest of researchers in desalination and wastewater treatment because of low energy requirement and eco-friendly nature. Firstly, this article provides a brief overview of MDC technology. Secondly, factors affecting functioning of MDC and its applications have been accentuated. Additionally, challenges and future outlook on the development of this technology have been delineated. State-of-the-art information provided in this review would expand the scope of interdisciplinary and translational research.

New Insights in factors affecting ground water quality with focus on health risk assessment and remediation techniques

Groundwater is considered as the primary source of water for the majority of the world's population. The preponderance of the nation's drinking water, as well as agricultural and industrial water, comes from groundwater. Groundwater level is becoming increasingly challenging to replenish due to climate change. Fertilizer application and improper processing of industrial waste are the two major anthropogenic drivers of groundwater pollution. Arsenic and cadmium are two of the principal heavy metal pollutants that have affected groundwater quality by human activity. When people are exposed to both non-carcinogenic and carcinogenic contaminants for an extended period, toxic effects might occur. It can have detrimental health effects from long-term exposure to contaminants, even in low amounts. As a result, metal contamination concentrations and fractions can be used to determine potential health concerns. At the same time, contaminants also need to be removed or converted to harmless products by groundwater remediation. Remediation of groundwater quality can be accomplished in several ways, including natural and artificial means. The purpose of this review is to explore a wide range of factors that affect groundwater quality, including their possible health effects. This communication provides state-of-the-art information about remediation approaches for groundwater contamination including hindrances and perspectives in this area of research. The in-depth information provided in different sections of this communication would expand the scope of interdisciplinary research.

Extra benefit of microalgae in raw piggery wastewater treatment: pathogen reduction

BACKGROUND

Monitoring microbial communities especially focused on pathogens in newly developed wastewater treatment systems is recommended for public health. Thus, we investigated the microbial community shift in a pilot-scale microalgal treatment system for piggery wastewater.

RESULTS

Microalgae showed reasonable removal efficiencies for COD and ammonia, resulting in higher transparency of the final effluent. Metagenome and microbial diversity analyses showed that heterotrophic microalgal cultivation barely changed the bacterial community; however, the mixotrophic microalgal cultivation induced a sudden change. In addition, an evaluation of risk groups (RGs) of bacteria showed that raw piggery wastewater included abundant pathogens, and the microalgal treatment of the raw piggery wastewater decreased the RG2 pathogens by 63%. However, co-cultivation of microalgae and the most dominant RG2 pathogen, Oligella, showed no direct effects between them.

CONCLUSIONS

Thus, a microbial interaction network was constructed to elucidate algae-bacteria interrelationships, and the decrease in Oligella was indirectly connected with microalgal growth via Brevundimonas, Sphingopyxis, and Stenotrophomonas. In a validation test, 3 among 4 connecting bacterial strains exhibited inhibition zones against Oligella. Therefore, we showed that microalgal wastewater treatment causes a decrease in RG2 bacteria, which is an indirect impact of microalgae associated with bacteria. Video abstract.

Lutein production by microalgae using corn starch wastewater pretreated with rapid enzymatic hydrolysis

The main purpose of this study was to explore the pretreatment process of corn starch wastewater (CSW) and engineered microalgae cultivation strategy to improve the nutrient recovery from wastewater and the yield of microalgae lutein. One-stage enzymatic hydrolysis utilizing α-amylase and glucoamylase simultaneously was established to efficiently harvest a maximum concentration of reducing sugar content of 7.26 g/L from CSW in 50 min. Lutein yield of 10.96 mg/L was obtained under 24 h continuous illumination with 2200 Lux light intensity. Furthermore, a cyclic feeding cultivation strategy was developed to improve lutein accumulation and COD removal up to 25.9 mg/L and 50.7%, respectively, after three cultivation cycles. Lutein yield of 14.86 mg/L and COD removal efficiency of 73.2% was achieved with further implementation in actual wastewater. This work provided a new perspective in developing the potential of cultivating microalgae with corn starch wastewater to produce high-value lutein.

Nutraceutical productions from microalgal derived compounds via circular bioeconomy perspective

Circular bioeconomy has become a sustainable business model for commercial production that promises to reuse, recycle & recover while considering less environmental footprints in nutraceutical industries. Microalgae biotechnology has the synergy to bioremediate waste stream while generating high-value-added compounds such as astaxanthin, protein and polyunsaturated fatty acids that are potential compounds used in various industries, thus, the integration of this approach provides economic advantages. However, since the industrial production of these compounds is costly and affected byunstable climate in the Nordic regions such as low temperature, light intensity, and polar circle, the focus of biosynthesis has shifted from less tolerant commercial strains towards indigenous strains. Nutraceutical productions such as polyunsaturated fatty acids and protein can now be synthesized at low temperatures which significantly improve the industry's economy. In this review, the above-mentioned compounds with potential strains were discussed based on a Nordic region's perspective.

Impact of light on microalgal photosynthetic microbial fuel cells and removal of pollutants by nanoadsorbent biopolymers: Updates, challenges and innovations

Photosynthetic microbial fuel cells (PMFCs) with microalgae have huge potential for treating wastewater while simultaneously converting light energy into electrical energy. The efficiency of such cells directly depends on algal growth, which depends on light intensity. Higher light intensity results in increased potential as well as enhancement in generation of biomass rich in biopolymers. Such biopolymers are produced either by microbes at anode and algae at cathode or vice versa. The biopolymers recovered from these biological sources can be added in wastewater alone or in combination with nanomaterials to act as nanoadsorbents. These nanoadsorbents further increase the efficiency of PMFC by removing the pollutants like metals and dyes. In this review firstly the effect of different light intensities on the growth of microalgae, importance of diatoms in a PMFC and their impact on PMFCs efficiencies have been narrated. Secondly recovery of biopolymers from different biological sources and their role in removal of metals, dyes along with their impact on circular bioeconomy have been discussed. Thereafter bottlenecks and future perspectives in this field of research have been narrated.

Co-culture of microalgae-activated sludge in sequencing batch photobioreactor systems: Effects of natural and artificial lighting on wastewater treatment

Co-culture using microalgae-activated sludge in Sequencing Batch Photobioreactors (PBRs) was investigated for wastewater treatment performance. This study evaluated the effect of natural and artificial lighting conditons on treatment performance under consideration of energy consumption. The results found that the removal of nutrients and COD of natural lighting condition was only 10% and 13% lower than those of artificial lighting respectively. Generally, artificial lighting mode took an advantage in pollutants removal. However, standing at 0.294 kWh L^-1, the total energy consumption of natural lighting was over two times less than that of artificial lighting. It reveals the natural lighting system played a dominant role for cutting energy costs significantly compared to artificial lighting one (∼57%). As a practical viewpoint on energy aspect and treatment performance, a natural lighting PBR system would be a sustainable option for microalgae-activated sludge co-culture system treating wastewater.

Cultivation and Biorefinery of Microalgae (Chlorella sp.) for Producing Biofuels and Other Byproducts: A Review

Microalgae-based carbon dioxide (CO2) biofixation and biorefinery are the most efficient methods of biological CO2 reduction and reutilization. The diversification and high-value byproducts of microalgal biomass, known as microalgae-based biorefinery, are considered the most promising platforms for the sustainable development of energy and the environment, in addition to the improvement and integration of microalgal cultivation, scale-up, harvest, and extraction technologies. In this review, the factors influencing CO2 biofixation by microalgae, including microalgal strains, flue gas, wastewater, light, pH, temperature, and microalgae cultivation systems are summarized. Moreover, the biorefinery of Chlorella biomass for producing biofuels and its byproducts, such as fine chemicals, feed additives, and high-value products, are also discussed. The technical and economic assessments (TEAs) and life cycle assessments (LCAs) are introduced to evaluate the sustainability of microalgae CO2 fixation technology. This review provides detailed insights on the adjusted factors of microalgal cultivation to establish sustainable biological CO2 fixation technology, and the diversified applications of microalgal biomass in biorefinery. The economic and environmental sustainability, and the limitations and needs of microalgal CO2 fixation, are discussed. Finally, future research directions are provided for CO2 reduction by microalgae.

Diatom microalgae as smart nanocontainers for biosensing wastewater pollutants: recent trends and innovations

Microalgae have been recognized as one of the most efficient microorganisms to remediate industrial effluents. Among microalgae diatoms are silica shelled unicellular eukaryotes, found in all types of water bodies and flourish very well even in wastewater. They have their silica cell wall made up of nano arrayed pores arranged in a uniform fashion. Therefore, they act as smart nanocontainers to adsorb various trace metals, dyes, polymers, and drugs which are hazardous to human as well to aquatic life. The beautiful nanoarchitecture in diatoms allows them to easily bind to ligands of choice to form a nanocomposite structure with the pollutants which can be a chemical or biological component. Such naturally available diatom nanomaterials are economical and highly sensitive compared to manmade artificial silica nanomaterials to help in facile removal of the toxic pollutants from wastewater. This review is thus focused on employing diatoms to remediate various pollutants such as heavy metals, dyes, hydrocarbons detected in the wastewater. It also includes different microalgae as biosensors for determination of pollutants in effluents and the perspectives for nanotechnological applications in the field of remediating pollutants through microalgae. The review also discusses in length the hurdles and perspectives of employing microalgae in wastewater remediation.

Recovery of resources from industrial wastewater employing electrochemical technologies: status, advancements and perspectives

In the last two decades, water use has increased at twice the rate of population growth. The freshwater resources are getting polluted by contaminants like heavy metals, pesticides, hydrocarbons, organic waste, pathogens, fertilizers, and emerging pollutants. Globally more than 80% of the wastewater is released into the environment without proper treatment. Rapid industrialization has a dramatic effect on developing countries leading to significant losses to economic and health well-being in terms of toxicological impacts on humans and the environment through air, water, and soil pollution. This article provides an overview of physical, chemical, and biological processes to remove wastewater contaminants. A physical and/or chemical technique alone appears ineffective for recovering useful resources from wastewater containing complex components. There is a requirement for more processes or processes combined with membrane and biological processes to enhance operational efficiency and quality. More processes or those that are combined with biological and membrane-based processes are required to enhance operational efficiencies and quality. This paper intends to provide an exhaustive review of electrochemical technologies including microbial electrochemical technologies. It provides comprehensive information for the recovery of metals, nutrients, sulfur, hydrogen, and heat from industrial effluents. This article aims to give detailed information into the advancements in electrochemical processes to energy use, improve restoration performance, and achieve commercialization. It also covers bottlenecks and perspectives of this research area.

An integrated semi-continuous culture to treat original swine wastewater and fix carbon dioxide by an indigenous Chlorella vulgaris MBFJNU-1 in an outdoor photobioreactor

This work was the first time to evaluate the ability of an isolated Chlorella vulgaris MBFJNU-1 to remove nutrients of original swine wastewater (OSW) and fix carbon dioxide (CO₂) under outdoor conditions in a simultaneous manner using column photobioreactors. The results showed that microalga cultivated at 3% CO₂ in a batch mode achieved the highest biomass and CO₂ fixation rate. Then, a semi-continuous process for OSW treatment and CO₂ fixation simultaneously by microalga was established and the renewal rate of this process was deeply investigated. Microalga cultivated at 3% CO₂ and 80% renewal rate gave the highest productivities of total biomass, CO₂ fixation and the greatest average removal rates of total nitrogen, N-NH₄⁺, total phosphorus and chemical oxygen demand. Taken together, C. vulgaris MBFJNU-1 was the promising microalga under outdoor conditions for swine wastewater treatment and CO₂ fixation simultaneously for biofuels and biofertilizer production.

Effect of nano-TiO2 on humic acid utilization from piggery biogas slurry by microalgae

Resource recovery from piggery biogas slurry has become an inevitable demand for sustainable development of pig industry. Microalgae show great potential in recovering nitrogen and phosphorus from piggery slurry, but struggle to utilize organic pollutants, as most of them are inert components (e.g., humic acids, HAs). In this study, nano-TiO₂ was used to enhance the utilization of HAs by microalgae from piggery biogas slurry. Results showed that the optimal conditions for microalgal growth and HAs removal by the microalgae-TiO₂ coupling system were TiO₂ dosage of 0.30 g/L, microalgal inoculation concentration of 0.40 g/L, light intensity of 360 µmol photon/(m²·s) and temperature of 30 °C, with the microalgal chlorophyll concentration of 6.51 mg/L and HAs removal efficiency of 50.14%. Analysis of HAs composition variations in the piggery biogas slurry indicated that the decrease of HAs was caused by their decomposition into small molecules under the photocatalytic reactions of TiO₂.

Insights into diatom microalgal farming for treatment of wastewater and pretreatment of algal cells by ultrasonication for value creation

Wastewater management and its treatment have revolutionized the industry sector into many innovative techniques. However, the cost of recycling via chemical treatment has major issues especially in economically poor sectors. On the offset, one of the most viable and economical techniques to clean wastewater is by growing microalgae in it. Since wastewater is rich in nitrates, phosphates and other trace elements, the environment is suitable for the growth of microalgae. On the other side, the cost of harvesting microalgae for its secondary metabolites is burgeoning. While simultaneously growing of microalgae in photobioreactors requires regular feeding of the nutrients and maintenance which increases the cost of operation and hence cost of its end products. The growth of microalgae in waste waters makes the process not only economical but they also manufacture more amounts of value added products. However, harvesting of these values added products is still a cumbersome task. On the offset, it has been observed that pretreating the microalgal biomass with ultrasonication allows easy oozing of the secondary metabolites like oil, proteins, carbohydrates and methane at much lower cost than that required for their extraction. Among microalgae diatoms are more robust and have immense crude oil and are rich in various value added products. However, due to their thick silica walls they do not ooze the metabolites until the mechanical force on their walls reaches certain threshold energy. In this review recycling of wastewater using microalgae and its pretreatment via ultrasonication with special reference to diatoms is critically discussed. Perspectives on circular bioeconomy and knowledge gaps for employing microalgae to recycle wastewater have been comprehensively narrated.

Microbial fuel cells for remediation of environmental pollutants and value addition: Special focus on coupling diatom microbial fuel cells with photocatalytic and photoelectric fuel cells

With the advent of global industrialisation and adaptation of smart life there is rise in anthropogenic pollution especially in water. Remediation of the pollutants (such as metals, and dyes) present in industrial effluents is possible via microbes and algae present in the environment. Microbes are used in a microbial fuel cell (MFC) for remediation of various organic and inorganic pollutants. However, for industrial scale application coupling the MFCs with photocatalytic and photoelectric fuel cell has a potential in improving the output of power. It can also be used for remediation of pollutants more expeditiously, conserving fossil fuels, cleaning environment, hence making the coupled hybrid fuel cell to run economically. Furthermore, such MFC inbuilt with algae in living or powder form give additional value addition products like biofuel, polysaccharides, biopolymers, and polyhydroxy alkanoates etc. This review provides bird's eye view on the removal of environmental pollutants by different biological sources like bacteria and algae. The article is focussed on diatoms as potential algae since they are rich source of crude oil and high value added products in a hybrid photocatalytic MFC. It also covers bottle necks, challenges and future in this field of research.