Bacterial biofilm and extracellular polymeric substances in the moving bed biofilm reactor for wastewater treatment: A review

Synergistic toxic effects of high-strength ammonia and ZnO nanoparticles on biological nitrogen removal systems and role of exogenous C10-HSL regulation

The inhibitory effects of zinc oxide nanoparticles (ZnO NPs) and impacts of N-acyl-homoserine lactone (AHL)-based quorum sensing (QS) on biological nitrogen removal (BNR) performance have been well-investigated. However, the effects of ammonia nitrogen (NH4+-N) concentrations on NP toxicity and AHL regulation have seldom been addressed yet. This study consulted on the impacts of ZnO NPs on BNR systems when high NH4+-N concentration was available. The synergistic toxic effects of high-strength NH4+-N (200 mg/L) and ZnO NPs resulted in decreased ammonia oxidation rates and dropped the nitrogen removal efficiencies by 17.5% ± 0.2%. The increased extracellular polymeric substances (EPS) production was observed in response to the high NH4+-N and ZnO NP stress, which indicated the defense mechanism against the toxic effects in the BNR systems was stimulated. Furthermore, the regulatory effects of exogenous N-decanoyl-homoserine lactone (C10-HSL)-mediated QS system on NP-stressed BNR systems were revealed to improve the BNR performance under different NH4+-N concentrations. The C10-HSL regulated the intracellular reactive oxygen species levels, denitrification functional enzyme activities, and antioxidant enzyme activities, respectively. This probably synergistically enhanced the defense mechanism against NP toxicity. However, compared to the low NH4+-N concentration of 60 mg/L, the efficacy of C10-HSL was inhibited at high NH4+-N levels of 200 mg/L. The findings provided the significant application potential of QS system for BNR when facing toxic compound shock threats.

Cronobacter sakazakii lysozyme inhibitor LprI mediated by HmsP and c-di-GMP is essential for biofilm formation and virulence

Cronobacter sakazakii poses a significant threat, particularly to neonates and infants. Despite its strong pathogenicity, understanding of C. sakazakii biofilms and their role in infections remains limited. This study investigates the roles of HmsP and c-di-GMP in biofilm formation and identifies key genetic and proteomic elements involved. Gene knockout experiments reveal that HmsP and c-di-GMP are linked to biofilm formation in C. sakazakii. Comparative proteomic profiling identifies the lysozyme inhibitor protein LprI, which is downregulated in hmsP knockouts and upregulated in c-di-GMP knockouts, as a potential biofilm formation factor. Further investigation of the lprI knockout strain shows significantly reduced biofilm formation and decreased virulence in a rat infection model. Additionally, LprI is demonstrated to bind extracellular DNA, suggesting a role in anchoring C. sakazakii within the biofilm matrix. These findings enhance our understanding of the molecular mechanisms underlying biofilm formation and virulence in C. sakazakii, offering potential targets for therapeutic intervention and food production settings.IMPORTANCECronobacter sakazakii is a bacterium that poses a severe threat to neonates and infants. This research elucidates the role of the lysozyme inhibitor LprI, modulated by HmsP and c-di-GMP, and uncovers a key factor in biofilm formation and virulence. The findings offer crucial insights into the molecular interactions that enable C. sakazakii to form resilient biofilms and persist in hostile environments, such as those found in food production facilities. These insights not only enhance our understanding of C. sakazakii pathogenesis but also identify potential targets for novel therapeutic interventions to prevent or mitigate infections. This work is particularly relevant to public health and the food industry, where controlling C. sakazakii contamination in powdered infant formula is vital for safeguarding vulnerable populations.

Biofilm formation and microbial interactions in moving bed-biofilm reactors treating wastewater containing pharmaceuticals and personal care products: A review

The risk of pharmaceuticals and personal care products (PPCPs) has been paid more attention after the outbreak of COVID-19, threatening the ecology and human health resulted from the massive use of drugs and disinfectants. Wastewater treatment plants are considered the final stop to restrict PPCPs from wide spreading into the environment, but the performance of conventional treatment is limited due to their concentrations and characteristics. Previous studies have shown the unreplaceable capability of moving bed-biofilm reactor (MBBR) as a cost-effective method with layered microbial structure for treating wastewater even with toxic compounds. The biofilm community and microbial interactions are essential for the MBBR process in completely degrading or converting types of PPCPs to secondary metabolites, which still need further investigation. This review starts with discussing the initiation of MBBR formation and its influencing parameters according to the research on MBBRs in the recent years. Then the efficiency of MBBRs and the response of biofilm after exposure to PPCPs are further addressed, followed by the bottlenecks proposed in this field. Some critical approaches are also recommended for mitigating the deficiencies of MBBRs based on the recently published publications to reduce the environmental risk of PPCPs. Finally, this review provides fundamental information on PPCPs removal by MBBRs with the main focus on microbial interactions, promoting the MBBRs to practical application in the real world of wastewater treatment.

Biodegradation of carbon disulfide and hydrogen sulfide using a moving bed biofilm reactor coupled with sulfur recycling: Performance, mechanism, and potential application

In this work, a moving bed biofilm reactor (MBBR) was equipped for simultaneous biodegradation of CS2 and H2S. MBBR was started up and operated with different inlet concentrations and retention time; results indicated that approximately 81.9% CS2 and 93.9% H2S could be degraded, and the maximum elimination capacities of 209.3 g/(m3·h) and 138.5 g/(m3·h) were achieved for CS2 and H2S, respectively. The biodegradation mechanisms, including mass transfer, kinetics, and electron transfer, were then investigated. The mass transfer fraction and the maximum degradation rate per unit filter volume were calculated for evaluating the characteristics of mass transfer in MBBR. The variations of extracellular polymeric substances secretion, electron transport system activity and ATP enzyme activity showed that MBBR had an excellent performance for waste gas purification. Subsequently, the recovery of sulfur was explored via morphology, crystal structure, and generation kinetics, indicating that a modified Gompertz model could precisely describe the kinetics of sulfur recovery, and the product selectivity of 51.7% was achieved for sulfur. The microbial community analysis suggested that the dominant genera for biodegradation and sulfur recovery were Acidithiobacillus and Mycobacterium. Finally, MBBR system was validated for treatment of actual waste gas; results indicated that maximum elimination capacities of 134.1 g/(m3·h) and 117.1 g/(m3·h) were obtained for CS2 and H2S, respectively, suggesting that MBBR had the potential for application.

Biofilm mitigation in hybrid chemical-biological upcycling of waste polymers

Introduction: Accumulation of plastic waste in the environment is a serious global issue. To deal with this, there is a need for improved and more efficient methods for plastic waste recycling. One approach is to depolymerize plastic using pyrolysis or chemical deconstruction followed by microbial-upcycling of the monomers into more valuable products. Microbial consortia may be able to increase stability in response to process perturbations and adapt to diverse carbon sources, but may be more likely to form biofilms that foul process equipment, increasing the challenge of harvesting the cell biomass. Methods: To better understand the relationship between bioprocess conditions, biofilm formation, and ecology within the bioreactor, in this study a previously-enriched microbial consortium (LS1_Calumet) was grown on (1) ammonium hydroxide-depolymerized polyethylene terephthalate (PET) monomers and (2) the pyrolysis products of polyethylene (PE) and polypropylene (PP). Bioreactor temperature, pH, agitation speed, and aeration were varied to determine the conditions that led to the highest production of planktonic biomass and minimal formation of biofilm. The community makeup and diversity in the planktonic and biofilm states were evaluated using 16S rRNA gene amplicon sequencing. Results: Results showed that there was very little microbial growth on the liquid product from pyrolysis under all fermentation conditions. When grown on the chemically-deconstructed PET the highest cell density (0.69 g/L) with minimal biofilm formation was produced at 30°C, pH 7, 100 rpm agitation, and 10 sL/hr airflow. Results from 16S rRNAsequencing showed that the planktonic phase had higher observed diversity than the biofilm, and that Rhodococcus, Paracoccus, and Chelatococcus were the most abundant genera for all process conditions. Biofilm formation by Rhodococcus sp. And Paracoccus sp. Isolates was typically lower than the full microbial community and varied based on the carbon source. Discussion: Ultimately, the results indicate that biofilm formation within the bioreactor can be significantly reduced by optimizing process conditions and using pure cultures or a less diverse community, while maintaining high biomass productivity. The results of this study provide insight into methods for upcycling plastic waste and how process conditions can be used to control the formation of biofilm in bioreactors.

A review on the application of biochar as an innovative and sustainable biocarrier material in moving bed biofilm reactors for dye removal from environmental matrices

Dye decolorization through biological treatment techniques has been gaining momentum as it is based on suspended and attached growth biomass in both batch and continuous modes. Hence, this review focused on the contribution of moving bed biofilm reactors (MBBR) in dye removal. MBBR have been demonstrated to be an excellent technology for pollution extraction, load shock resistance, and equipment size and energy consumption reduction. The review went further to highlight different biocarrier materials for biofilm development this review identified biochar as an innovative and environmentally friendly material produced through the application of different kinds of reusable or recyclable wastes and biowastes. Biochar as a carbonized waste biomass could be a better competitor and environmentally friendly substitute to activated carbon given its lower mass costs. Biochar can be easily produced particularly in rural locations where there is an abundance of biomass-based trash. Given that circular bioeconomy lowers dependency on natural resources by turning organic wastes into an array of useful products, biochar empowers the creation of competitive goods. Thus, biochar was identified as a novel, cost-effective, and long-term management strategy since it brings about several essential benefits, including food security, climate change mitigation, biodiversity preservation, and sustainability improvement. This review concludes that integrating two treatment methods could greatly lead to better color, organic matter, and nutrients removal than a single biological MBBR treatment process.

Recovery strategies and mechanisms of anammox reaction following inhibition by environmental factors: A review

Anaerobic ammonium oxidation (anammox) is a promising biological method for treating nitrogen-rich, low-carbon wastewater. However, the application of anammox technology in actual engineering is easily limited by environmental factors. Considerable progress has been investigated in recent years in anammox restoration strategies, significantly addressing the challenge of poor reaction performance following inhibition. This review systematically outlines the strategies employed to recover anammox performance following inhibition by conventional environmental factors and emerging pollutants. Additionally, comprehensive summaries of strategies aimed at promoting anammox activity and enhancing nitrogen removal performance provide valuable insights into the current research landscape in this field. The review contributes to a comprehensive understanding of restoration strategies of anammox-based technologies.

Bioaugmented biological contact oxidation reactor for treating simulated textile dyeing wastewater

In this study, modified polyamide fibers were used as biocarriers to enrich dense biofilms in a multi-stage biological contact oxidation reactor (MBCOR) in which partitioned wastewater treatment zone (WTZ) and bioaugmentation zone (BAZ) were established to enhance the removal of methyl orange (MO) and its metabolites while minimizing sludge yields. WTZ exhibited high biomass loading capacity (5.75 ± 0.31 g/g filler), achieving MO removal rate ranging from 68 % to 86 % under different aeration condition within 8 h in which the most dominant genus Chlorobium played an important role. In the BAZ, Pseudoxanthomonas was the dominant genus while carbon starvation stimulated the enrichment of chemoheterotrophy and aerobic_chemoheterotrophy genes thereby enhanced the microbial utilization of cell-released substrates, MO as well as its metabolic intermediates. These results revealed the mechanism bioaugmentation on MBCOR in effectively eliminating both MO and its metabolites.

Role of Staphylococcus aureus's Buoyant Density in the Development of Biofilm Associated Antibiotic Susceptibility

Biofilms are clusters of microorganisms that form at various interfaces, including those between air and liquid or liquid and solid. Due to their roles in enhancing wastewater treatment processes, and their unfortunate propensity to cause persistent human infections through lowering antibiotic susceptibility, understanding and managing bacterial biofilms is of paramount importance. A pivotal stage in biofilm development is the initial bacterial attachment to these interfaces. However, the determinants of bacterial cell choice in colonizing an interface first and heterogeneity in bacterial adhesion remain elusive. Our research has unveiled variations in the buoyant density of free-swimming Staphylococcus aureus cells, irrespective of their growth phase. Cells with a low cell buoyant density, characterized by fewer cell contents, exhibited lower susceptibility to antibiotic treatments (100 μg/mL vancomycin) and favored biofilm formation at air-liquid interfaces. In contrast, cells with higher cell buoyant density, which have richer cell contents, were more vulnerable to antibiotics and predominantly formed biofilms on liquid-solid interfaces when contained upright. Cells with low cell buoyant density were not able to revert to a more antibiotic sensitive and high cell buoyant density phenotype. In essence, S. aureus cells with higher cell buoyant density may be more inclined to adhere to upright substrates.

Wastewater treatment using moving bed biofilm reactor technology: a case study of ceramic industry

Biological approaches and coagulation are frequently used to reduce the chemical oxygen demand (COD) for treatment of ceramic effluent water. The technology known as the moving bed biofilm reactor (MBBR) can accomplish this goal. Further, the process of emulsification-aided innovative MBBR using biosurfactants can be proposed for ceramic effluent treatment. In a step-by-step upgrading scheme, biosurfactants and a consortia of halophilic and halotolerant microbial culture was utilized for the treatment of the effluent water. Over the course of 21 days, a progressive decrease in COD of up to 95.79% was achieved. Over the next 48 h period, the biochemical oxygen demand (BOD) was reduced by 98.3%, while total suspended solids (TSS) decreased by 79.41%. With the use of this innovative MBBR technology, biofilm formation accelerated, lowering the COD, BOD, and TSS levels. This allows treated water to be used for further research on recycling it back into the ceramics sector and repurposing it for agricultural purposes. PRACTITIONER POINTS: Implementation of modified MBBR technology for the treatment of effluent water. Biosurfactants could reduce in the organic and inorganic loads. Increase in MLSS values with COD removal observed. The plant operations without the use of chemical coagulants was effective with biosurfactants. Biofilm formation on carriers was scraped and the presence of surfactin and rhamnolipid was confirmed.

Cold-active microbial enzymes and their biotechnological applications

Microorganisms known as psychrophiles/psychrotrophs, which survive in cold climates, constitute majority of the biosphere on Earth. Their capability to produce cold-active enzymes along with other distinguishing characteristics allows them to survive in the cold environments. Due to the relative ease of large-scale production compared to enzymes from plants and animals, commercial uses of microbial enzyme are alluring. The ocean depths, polar, and alpine regions, which make up over 85% of the planet, are inhabited to cold ecosystems. Microbes living in these regions are important for their metabolic contribution to the ecosphere as well as for their enzymes, which may have potential industrial applications. Cold-adapted microorganisms are a possible source of cold-active enzymes that have high catalytic efficacy at low and moderate temperatures at which homologous mesophilic enzymes are not active. Cold-active enzymes can be used in a variety of biotechnological processes, including food processing, additives in the detergent and food industries, textile industry, waste-water treatment, biopulping, environmental bioremediation in cold climates, biotransformation, and molecular biology applications with great potential for energy savings. Genetically manipulated strains that are suitable for producing a particular cold-active enzyme would be crucial in a variety of industrial and biotechnological applications. The potential advantage of cold-adapted enzymes will probably lead to a greater annual market than for thermo-stable enzymes in the near future. This review includes latest updates on various microbial source of cold-active enzymes and their biotechnological applications.

Treatment of high-strength saline bilge wastewater by four pilot-scale aerobic moving bed biofilm reactors and comparison of the microbial communities

Four Pilot-scale Moving Bed Biofilm Reactors (MBBRs) were operated for the treatment of real, saline, bilge wastewater. The MBBRs were connected in pairs to create two system configurations with different filling ratios (20%, 40%) and were operated in parallel. The inflow organic loading rate (OLR) varied from 3.6 ± 0.2 to 7.8 ± 0.6 g COD L-1 d-1, salinity was >15 ppt and three hydraulic residence times (HRTs) were tested 48, 30 and 24 h. In both systems, the first-stage bioreactors (R1 and R3) eliminated the higher part of the organic load (57%-65%). The second-stage bioreactors (R2 and R4) removed an additional fraction (18%-31%) of the organic load received by the effluent of R1 and R3, respectively. The microbial communities of the influent wastewater, suspended, and attached biomass were determined using 16S rRNA gene amplicon sequencing analysis. The evolution of the microbial communities was investigated and compared over the different operational phases. The microbial communities of the biofilm presented higher diversity and greater stability in composition over time, while the suspended biomass exhibited intense and rapid changes in the dominance of genera. Proteobacteria, Bacteroidetes and Firmicutes were highly present in the biofilm. The genera Celeribacter, Novispirillum, Roseovarius (class: Alphaproteobacteria) and Formosa (class: Flavobacteriia) were highly present during all operational phases. Principal Component Analysis (PCA) was used to identify similarities between samples, exhibiting high relation of samples according to the series of the bioreactor (1st, 2nd).

Type VI secretion system drives bacterial diversity and functions in multispecies biofilms

Type VI secretion system (T6SS) plays an essential role in interspecies interactions and provides an advantage for a strain with T6SS in multispecies biofilms. However, how T6SS drives the bacterial community structure and functions in multispecies biofilms still needs to be determined. Using gene deletion and Illumina sequencing technique, we estimated bacterial community responses in multispecies biofilms to T6SS by introducing T6SS-containing Pseudomonas putida KT2440. Results showed that the niche structure shifts of multispecies biofilms were remarkably higher in the presence of T6SS than in the absence of T6SS. The presence of T6SS significantly drove the variation in microbial composition, reduced the alpha-diversity of bacterial communities in multispecies biofilms, and separately decreased and increased the relative abundance of Proteobacteria and Bacteroidota. Co-occurrence network analysis with inferred putative bacterial interactions indicated that P. putida KT2440 mainly displayed strong negative associations with the genera of Psychrobacter, Cellvibrio, Stenotrophomonas, and Brevundimonas. Moreover, the function redundancy index of the bacterial community was strikingly higher in the presence of T6SS than in the absence of T6SS, regardless of whether relative abundances of bacterial taxa were inhibited or promoted. Remarkably, the increased metabolic network similarity with T6SS-containing P. putida KT2440 could enhance the antibacterial activity of P. putida KT2440 on other bacterial taxa. Our findings extend knowledge of microbial adaptation strategies to potential bacterial weapons and could contribute to predicting biodiversity loss and change in ecological functions caused by T6SS.

Insights into biofilm development on polyhydroxyalkanoate biofilm carrier for anoxic azo dye decolourization of acid orange 7

Polyhydroxyalkanoates (PHAs) are promising alternatives to non-degradable polymers in various applications. This study explored the use of biologically recovered PHA as a biofilm carrier in a moving bed biofilm reactor for acid orange 7 treatment. The PHA was comprised of 86 ± 1 mol% of 3-hydroxybutyrate and 14 ± 1 mol% of 3-hydroxyhexanoate and was melt-fused at 140 °C into pellets. The net positive surface charge of the PHA biocarrier facilitated attachment of negatively charged activated sludge, promoting biofilm formation. A 236-µm mature biofilm developed after 26 days. The high polysaccharides-to-protein ratio (>1) in the biofilm's extracellular polymeric substances indicated a stable biofilm structure. Four main microbial strains in the biofilm were identified as Leclercia adecarboxylata, Leuconostoc citreum, Bacillus cereus, and Rhodotorula mucilaginosa, all of which exhibited decolourization abilities. In conclusion, PHA holds promise as an effective biocarrier for biofilm development, offering a sustainable alternative in wastewater treatment applications.

Performance evaluation of gravity-driven bioreactor (GDB) for simultaneous treatment of black liquor and domestic wastewater

A lab-scale gravity-driven bioreactor (GDB) was designed and constructed to evaluate the simultaneous treatment of black liquor and domestic wastewater. The GDB was operated with a mixture of black liquor and domestic wastewater at a ratio of 1:1 and maintained at an average organic loading rate of 1235 mg-COD/L-Day. The wastewater was fed to the primary sedimentation tank at a flow rate of approximately 12 mL/min and subsequently passed through serially connected anaerobic and aerobic chambers with the same flow rate. Each wastewater sample was allowed to undergo a hydraulic retention time of approximately 72 h, ensuring effective treatment. The GDB was actively operated for nine samples (W1-W9) at a weekly frequency. The entire process was conducted within the workstation's ambient temperature range of 30-35 °C to sustain microbial activity and treatment efficiency in an open environment. The performance of the GDB was evaluated in terms of various pollution indicators, including COD, BOD5, lignin removal, TDS, TSS, EC, PO43-, SO42-, microbial load (CFU/mL and MPN index), total nitrogen, and color reduction. The results showed that the GDB achieved promising treatment efficiencies: 84.5% for COD, 71.80% for BOD5, 82.8% for TDS, 100% for TSS, 74.71% for E.C., 67.25% for PO43-, 81% for SO42-, and 69.36% for TN. Additionally, about 80% reduction in lignin content and 57% color reduction were observed after the treatment. The GDB substantially reduced microbial load in CFU/mL (77.98%) and MPN (90%). This study marks the first to report on wastewater treatment from two different sources (black liquor and domestic wastewater) using a simple GDB design. Furthermore, it highlights the GDB's potential as a cost-effective, environmentally friendly, and efficient solution for wastewater treatment, with no need for supplementary chemical or physical agents and zero operational costs.

Biofilm formation in xenobiotic-degrading microorganisms

The increased presence of xenobiotics affects living organisms and the environment at large on a global scale. Microbial degradation is effective for the removal of xenobiotics from the ecosystem. In natural habitats, biofilms are formed by single or multiple populations attached to biotic/abiotic surfaces and interfaces. The attachment of microbial cells to these surfaces is possible via the matrix of extracellular polymeric substances (EPSs). However, the molecular machinery underlying the development of biofilms differs depending on the microbial species. Biofilms act as biocatalysts and degrade xenobiotic compounds, thereby removing them from the environment. Quorum sensing (QS) helps with biofilm formation and is linked to the development of biofilms in natural contaminated sites. To date, scant information is available about the biofilm-mediated degradation of toxic chemicals from the environment. Therefore, we review novel insights into the impact of microbial biofilms in xenobiotic contamination remediation, the regulation of biofilms in contaminated sites, and the implications for large-scale xenobiotic compound treatment.

Response of biofilm-based systems for antibiotics removal from wastewater: Resource efficiency and process resiliency

Biofilm-based systems have efficient stability to cope-up influent shock loading with protective and abundant microbial assemblage, which are extensively exploited for biodegradation of recalcitrant antibiotics from wastewater. The system performance is subject to biofilm types, chemical composition, growth and thickness maintenance. The present study elaborates discussion on different type of biofilms and their formation mechanism involving extracellular polymeric substances secreted by microbes when exposed to antibiotics-laden wastewater. The biofilm models applied for estimation/prediction of biofilm-based systems performance are explored to classify the application feasibility. Further, the critical review of antibiotics removal efficiency, design and operation of different biofilm-based systems (e.g. rotating biological contactor, membrane biofilm bioreactor etc.) is performed. Extending the information on effect of various process parameters (e.g. hydraulic retention time, pH, biocarrier filling ratio etc.), the microbial community dynamics responsible of antibiotics biodegradation in biofilms, the technological problems, related prospective and key future research directions are demonstrated. The biofilm-based system with biocarriers filling ratio of ∼50-70% and predominantly enriched with bacterial species of phylum Proteobacteria protected under biofilm thickness of ∼1600 μm is effectively utilized for antibiotic biodegradation (>90%) when operated at DO concentration ≥3 mg/L. The C/N ratio ≥1 is best suitable condition to eliminate antibiotic pollution from biofilm-based systems. Considering the significance of biofilm-based systems, this review study could be beneficial for the researchers targeting to develop sustainable biofilm-based technologies with feasible regulatory strategies for treatment of mixed antibiotics-laden real wastewater.

Phototransformation of extracellular polymeric substances in activated sludge and their interaction with microplastics

Substantial amounts of extracellular polymeric substances (EPS) are present in sludge from wastewater treatment plants (WWTP), and EPS can significantly affect the fate, bioavailability, and toxicity of microplastics (MPs) that coexist in the effluent, however, the mechanism of action between EPS and microplastics remains unclear. In addition, ultraviolet (UV) disinfection is indispensable in the wastewater treatment process in WWTP, which can significantly affect the characteristics of EPS. Therefore, it is of great significance to study the photochemical characteristics of EPS and the effect on binding MPs. In this study, using multispectral technology and two-dimensional correlation spectroscopy analysis, indicates that the molecular weight and aromaticity of EPS after phototransformation were reduced. The results showed that the adsorption of EPS on PSMPs was in the order of TB-EPS > LB-EPS > S-EPS, which was positively correlated with the SUVA254, but negatively correlated with O/C of EPS. This indicates that the main adsorption mechanisms of PSMPs on EPS were π-π and hydrophobicity. The adsorption capacity of S-EPS, LB-EPS and TB-EPS to PSMPs decreased with the increasing of illumination time. After phototransformation, the adsorption sensitivity and reaction sequence of EPS and PSMPs did not change much. This research provides a theoretical basis for understanding the photochemical transformation of extracellular polymers and the morphology and migration of microplastics in sewage treatment, and evaluating the impact of microplastics on ecosystems.

Adaptation of anammox process for nitrogen removal from acidic nitritation effluent in a low pH moving bed biofilm reactor

Acidic partial nitritation (PN) has emerged to be a promisingly stable process in wastewater treatment, which can simultaneously achieve nitrite accumulation and about half of ammonium reduction. However, directly applying anaerobic ammonium oxidation (anammox) process to treat the acidic PN effluent (pH 4-5) is susceptible to the inhibition of anammox bacteria. Here, this study demonstrated the adaptation of anammox process to acidic pH in a moving bed biofilm reactor (MBBR). By feeding the laboratory-scale MBBR with acidic PN effluent (pH = 4.6 ± 0.2), the pH of an anammox reactor was self-sustained in the range of pH 5 - 6. Yet, a high total nitrogen removal efficiency of over 80% at a practical loading rate of up to 149.7 ± 3.9 mg N/L/d was achieved. Comprehensive microbial assessment, including amplicon sequencing, metagenomics, cryosection-FISH, and qPCR, identified that Candidatus Brocadia, close to known neutrophilic members, was the dominant anammox bacteria. Anammox bacteria were found present in the inner layer of thick biofilms but barely present in the surface layer of thick biofilms and in thin biofilms. Results from batch tests also showed that the activity of anammox biofilms could be maintained when subjected to pH 5 at a nitrite concentration of 10 mg N/L, whereas the activity was completely inhibited after disturbing the biofilm structure. These results collectively indicate that the anammox bacteria enriched in the present acidic MBBR could not be inherently acid-tolerant. Instead, the achieved stable anammox performance under the acidic condition is likely due to biofilm stratification and protection. This result highlights the biofilm configuration as a useful solution to address nitrogen removal from acidic PN effluent, and also suggests that biofilm may play a critical role in protecting anammox bacteria found in many acidic nature environments.

Long-Term Continuous Test of H2-Induced Denitrification Catalyzed by Palladium Nanoparticles in a Biofilm Matrix

Pd0 catalysis and microbially catalyzed reduction of nitrate (NO3--N) were combined as a strategy to increase the kinetics of NO3- reduction and control selectivity to N2 gas versus ammonium (NH4+). Two H2-based membrane biofilm reactors (MBfRs) were tested in continuous mode: one with a biofilm alone (H2-MBfR) and the other with biogenic Pd0 nanoparticles (Pd0NPs) deposited in the biofilm (Pd-H2-MBfR). Solid-state characterizations of Pd0NPs in Pd-H2-MBfR documented that the Pd0NPs were uniformly located along the outer surfaces of the bacteria in the biofilm. Pd-H2-MBfR had a higher rate of NO3- reduction compared to H2-MBfR, especially when the influent NO3- concentration was high (28 mg-N/L versus 14 mg-N/L). Pd-H2-MBfR enriched denitrifiers of Dechloromonas, Azospira, Pseudomonas, and Stenotrophomonas in the microbial community and also increased abundances of genes affiliated with NO3--N reductases, which reflected that the denitrifying bacteria could channel their respiratory electron flow to NO3- reduction to NO2-. N2 selectivity in Pd-H2-MBfR was regulated by the H2/NO3- flux ratio: 100% selectivity to N2 was achieved when the ratio was less than 1.3 e- equiv of H2/e- equiv N, while the selectivity toward NH4+ occurred with larger H2/NO3- flux ratios. Thus, the results with Pd-H2-MBfR revealed two advantages of it over the H2-MBfR: faster kinetics for NO3- removal and controllable selectivity toward N2 versus NH4+. By being able to regulate the H2/NO3- flux ratio, Pd-H2-MBfR has significant implications for improving the efficiency and effectiveness of the NO3- reduction processes, ultimately leading to more environmentally benign wastewater treatment.

Effects of successional sulfadiazine exposure on biofilm in moving bed biofilm reactor: Secretion of extracellular polymeric substances, community activity and functional gene expression

The effects of sulfadiazine (SDZ) on responses of biofilm in a moving bed biofilm reactor were explored with emphasis on the changes in extracellular polymeric substances (EPS) and functional genes. It was found that 3 to 10 mg/L SDZ reduced the protein (PN) and polysaccharide (PS) contents of EPS by 28.7%-55.1% and 33.3%-61.4%, respectively. The EPS maintained high ratio of PN to PS (10.3-15.1), and the major functional groups within EPS remained unaffected to SDZ. Bioinformatics analysis showed that SDZ significantly altered the community activity such as increased expression of s_Alcaligenes faecali. Totally, the biofilm held high SDZ removal rates, which were ascribed to the self-protection by secreted EPS, and genes levels upregulation of antibiotic resistance and transporter protein. Collectively, this study provides more details on the biofilm community exposure to an antibiotic and highlights the role of EPS and functional genes in antibiotic removal.

Rapid start-up and long-term stable operation of the anammox reactor based on biofilm process: Status, challenges, and perspectives

Anammox-biofilm processes have great potential for wastewater nitrogen removal, as it overcomes the slow growth and easy loss of AnAOB (anaerobic ammonium oxidation bacteria). Biofilm carrier is the core part of the Anammox-biofilm reactor and plays a key role in the start-up and long-term operation of the process. Therefore, the research on the biofilm carrier of Anammox-based process was summarized and discussed in terms of configurations and types. In the Anammox-biofilm process, fixed bed biofilm reactor is a relatively mature biofilm carrier configuration and has advantages in terms of nitrogen removal and long-term operational stability, while moving bed biofilm reactor has advantages in terms of start-up time. Although the long-term operational stability of fluidized bed biofilm reactor is good, its nitrogen removal performance needs to be improved. Among the different biofilm carrier categories, the inorganic biofilm carrier has an advantage in start-up time, due to the enhancement of the growth and metabolic of AnAOB by inorganic materials (such as carbon and iron). Anammox-based reactors using organic biofilm carriers, especially suspension carriers, are well-established and more stable in long-term operation. Composite biofilm carriers combine the advantages of several materials, but their complex preparation procedures lead to high costs. In addition, possible research directions for accelerating the start-up and keeping the long-term stable operation of Anammox reactor by biofilm process were highlighted. It is hoped to provide a possible pathway for the rapid start-up of Anammox-based process, and references for the optimization and promotion of process.

Effects of fluidised carriers on the community composition, settleability and energy production of indigenous microalgal consortia cultivated in treated wastewater

Fluidised-bed systems are a promising approach to microalgal cultivation, but few studies have considered their application to indigenous microalgal consortia (IMCs), which have high adaptability to wastewater. In this study, IMCs were cultivated in treated wastewater with and without fluidised carriers, and the effects of operating parameters were considered. Microalgae in the culture were confirmed to originate from the carriers, and the IMC presence on the carriers was promoted by decreasing the carrier replacement number and increasing the culture replacement volume. The presence of carriers enabled greater nutrient removal from the treated wastewater by the cultivated IMCs. Without carriers, IMCs in the culture were scattered and showed poor settleability. With carriers, IMCs in the culture exhibited good settleability owing to floc formation. The improved settleability with carriers also increased the energy production from sedimented IMCs.

Assessment of biodegradation kinetics and mass transfer aspects in attached growth bioreactor for effective treatment of Brilliant green dye from wastewater

In this study, Bacillus licheniformis immobilized with low-density polyethylene (LDPE) was employed to degrade Brilliant Green (BG) dye from wastewater in a packed bed bioreactor (PBBR). Bacterial growth and extracellular polymeric substance (EPS) secretion were also assessed under different concentrations of BG dye. The impacts of external mass transfer resistance on BG biodegradation were also evaluated at different flow rates (0.3 - 1.2 L/h). A new mass transfer correlation [Formula: see text] was proposed to study the mass transfer aspects in attached-growth bioreactor. The intermediates, namely 3- dimethylamino phenol, benzoic acid, 1-4 benzenediol, and acetaldehyde were identified during the biodegradation of BG and, subsequently degradation pathway was proposed. Han - Levenspiel kinetics parameters μ_max and K_s were found to be 0.185 per day and 115 mg/L, respectively. The new insight into mass transfer and kinetics support the design of efficiently attached growth bioreactor to treat a wide range of pollutants.

Unravelling ciprofloxacin removal in a nitrifying moving bed biofilm reactor: Biodegradation mechanisms and pathways

Although moving bed biofilm reactors (MBBRs) have shown excellent antibiotic removal potentials, the information on underlying mechanisms is yet limited. This work assessed the removal of ciprofloxacin in an enriched nitrifying MBBR by clarifying the contribution of adsorption and microbial-induced biodegradation. Results demonstrated the considerable biomass adsorption (55%) in first 30 min. Limiting nitrite oxidizing bacteria growth or inhibiting nitrification would lead to lower adsorption capacities. The highest ciprofloxacin biodegradation rate constant was 0.082 L g SS^-1 h^-1 in the presence of ammonium, owing to ammonia oxidizing bacteria (AOB)-induced cometabolism, while heterotrophs played an insignificant role (∼9%) in ciprofloxacin biodegradation. The developed model also suggested the importance of AOB-induced cometabolism and metabolism over heterotrophs-induced biodegradation by analyzing the respective biodegradation coefficients. Cometabolic biodegradation pathways of ciprofloxacin mainly involved the piperazine ring cleavage, probably alleviating antimicrobial activities. It implies the feasibility of nitrifying biofilm systems towards efficient antibiotic removal from wastewater.

Effect of fungal pellets on denitrifying bacteria at low carbon to nitrogen ratio: Nitrate removal, extracellular polymeric substances, and potential functions

This research aims to elucidate the effect of fungal pellets (FP) on denitrifying bacteria regarding nitrate (NO₃^--N) removal, extracellular polymeric substances (EPS), and potential functions at a low carbon to nitrogen (C/N) ratio. A symbiotic system of FP and denitrifying bacteria GF2 was established. The symbiotic system showed 100% NO₃^--N removal efficiency (4.07 mg L^-1 h^-1) at 6 h and enhanced electron transfer capability at C/N = 1.5. The interactions between FP and denitrifying bacteria promoted the production of polysaccharides (PS) in EPS. Both the increased PS and the PS provided by FP as well as protein and humic acid-like substances in EPS could be consumed by denitrifying bacteria. FP acted as a protector and provided habitat and nutrients for denitrifying bacteria as well as improved the ability of carbohydrate metabolism, amino metabolism, and nitrogen metabolism of denitrifying bacteria. This study provides a new perspective on the relationship between FP and denitrifying bacteria.

Identification of dissimilatory nitrate reduction to ammonium (DNRA) and denitrification in the dynamic cake layer of a full-scale anoixc dynamic membrane bioreactor for treating hotel laundry wastewater

Identification of dissimilatory nitrate reduction to ammonium (DNRA) and denitrification in the dynamic cake layer of a full-scale anoixc dynamic membrane bioreactor (AnDMBR) for treating hotel laundry wastewater was studied. A series of experiments were conducted to understand the contributions of DNRA and canonical denitrification activities in the dynamic cake layer of the AnDMBR. The dynamic cake layer developed included two phases - a steady transmembrane pressure (TMP) increase at 0.24 kPa/day followed by a sharp TMP jump at 1.26 kPa/day four to five days after the AnDMBR start-up. The nitrogen mass balance results showed that canonical denitrification was predominant during the development of the dynamic cake layer. However, DNRA activity and accumulation of bacteria equipped with a complete DNRA pathway showed a positive correlation to the development of the dynamic cake layer. Our metagenomic analysis identified an approximately 18% of the dynamic cake layer bacterial community has a complete DNRA pathway. Pannonibacter (1%), Thauera (0.8%) and Pseudomonas (3%) contained all genes encoding for funcional enzymes of both DNRA (nitrate reductase and DNRA nitrite reductase) and denitrification (nitrate reductase, nitrous oxide reductase and nitric oxide reductase). No other metagenome-assembled genomes (MAGs) possessed a complete cononical denitrification pathway, indicating food-chain-like interactions of denitrifiers in the dynamic cake layer. We found that COD loading rate could be used to control DNRA and canonical denitrification activities during the dynamic cake layer formation.

Nutrient and organic pollutants removal in synthetic wastewater by Pseudomonas aeruginosa and Chryseobacterium sp./biofilter systems

Nutrient and organic pollution raise serious problems for aquatic ecosystems through the accumulation of organic carbon, the reduction of light penetration, and the loss of submerged aquatic vegetation. The over-enrichment of water with nitrogen and phosphorus leads to an imbalance in nutrient ratios, creating favorable conditions for toxic algal blooms, formation of oxygen-depleted water, etc. Thus, developing new technological solutions to reduce their amount is imperative. The present study investigates the capacity of Pseudomonas aeruginosa and Chryseobacterium sp. bacterial strains to form biofilm on solid support (biofilter), both individually and in tandem, using various analytical techniques. Also, the biofilm/biofilter systems' efficiency in removing nutrients such as nitrate, nitrite, ammonium, and phosphate ions from municipal wastewaters is assessed. The results showed a reduction of nutrient pollution of up to 91%, 98%, 55%, and 71% for nitrite, nitrate, ammonium, and phosphate ions. A reduction of about 78% of COD was also observed. The results were obtained in the absence of an additional aeration process, thus having a great potential for reducing total costs of wastewater treatment and developing ecological systems for wastewater management.

Enhancing nitrogen removal through directly integrating anammox into mainstream wastewater treatment: Advantageous, issues and future study

Anaerobic ammonium oxidation (anammox) has great potential to be applied to the process of nitrogen removal from mainstream wastewater. However, directly applying complete anammox to the mainstream is typically hindered by low temperatures, a low ammonia concentration, and high organic matter concentrations. Directly integrating anammox into mainstream treatment by enhancing the in-situ enrichment of anammox bacteria in wastewater treatment plants (WWTPs) could effectively improve the nitrogen removal efficiency and reduce the treatment cost. A certain anammox bacteria abundance in full-scale WWTPs provides the feasibility of directly integrating anammox into mainstream treatment and realizing partial mainstream anammox. The technical development status of partial anammox and the mechanisms of achieving partial mainstream anammox by aeration and organic control are summarized. This review provides an enhanced understanding of this novel technical route of partial mainstream anammox treatment for improving the quality, performance, and prospects for this technology to be used in upgrading WWTPs.

Homogeneously and heterogeneously structured biofilm models for wastewater treatment

Biofilm, a layer comprising extracellular polymeric substances, is the platform where the embedded living cells degrade the substances in the wastewaters. Biofilm models have been developed as part of the comprehensive models for the wastewater treatment process. This review summarizes the biofilm models applied in contemporary literature based on the spatial dimensions adopted for model build-up. The most commonly applied biofilm models are null-dimensional, considering the biofilm active biomass for the substrate sink's biological reaction. The one-dimensional, multi-species models are the second standard models for contemporary studies, providing transport and reaction resistances of substrates in the biofilm matrix and the interactions of competing or collaborating strains in the biofilm. The structural homogeneity of the biofilm challenges the validity of the uniformly structured models, highlighting the need to re-examine the validity of the uniformly structured models. The challenges and prospects of biofilm model developments and applications are outlined.

Biofilm formation during wastewater treatment: Motility and physiological response of aerobic denitrifying bacteria under ammonia stress based on surface plasmon resonance imaging

A bacterial image analysis system based on surface plasmon resonance imaging was established to investigate the effect of bacterial motility on biofilm formation under high ammonia nitrogen at the single-cell level. The results showed that the bacterial mean rotation speed and vertical motility distance decreased with the increasing concentration of ammonia nitrogen. Ammonia nitrogen inhibited the metabolic activity of the bacteria, decreasing bacterial motility. Bacterial motility was negatively correlated with the biofilm-formation ability. The biofilm formation ability of Enterobacter cloacae strain HNR exposed to ammonia nitrogen was enhanced by reducing its movement and promoting EPS secretion. Genes related to the tricarboxylic acid cycle and oxidative phosphorylation were down-regulated, indicating inhibition of microbial energy metabolism. Genes related to bacterial secretion and lipopolysaccharide synthesis were up-regulated, facilitating the formation of biofilms and enabling the bacteria to resist ammonia nitrogen stress. This study provides new insights into the biofilm formation under ammonia stress.

Performance of simultaneous nitrification-denitrification and denitrifying phosphorus and manganese removal by driving a single-stage moving bed biofilm reactor based on manganese redox cycling

Simultaneous removal of NH₄⁺-N, NO₃^--N, COD, and P by manganese redox cycling in nutrient wastewater was established with a single-stage moving bed biofilm reactor (MBBR) under low C/N ratio. When sodium succinate replaced the conventional denitrifying carbon source, removal efficiencies of TN, NO₃^--N, NH₄⁺-N, TP, and Mn²⁺ were 65.13 %, 79.63 %, 92.79 %, 51.57 %, and 68.10 %, respectively. Based on modified Stover-Kincannon model, 11.03 and 10.05 mg TN·L^-1·h^-1 of U_max values were obtained with sodium acetate and sodium succinate as substrates. Extracellular polymeric substances were used to evaluate the characteristics of biofilm, and microbial community of biofilm was identified. Transformation processes of NO₃^--N, NH₄⁺-N, Mn²⁺, and P were investigated, suggesting that the main functional groups (e.g., CO, Mn-O, and CN bonds) participated in N, P, and Mn²⁺ removal, and MnO₂ was the main component of biogenic manganese oxides. This study provides a new strategy for nutrients removal by Mn²⁺ driven MBBR.

Efficiency of various biofilm carriers and microbial interactions with substrate in moving bed-biofilm reactor for environmental wastewater treatment

In a moving bed-biofilm reactor (MBBR), the fluidization efficiency, immobilization of microbial cells, and treatment efficiency are directly influenced by the shape and pores of biofilm carriers. Moreover, the efficacy of bioremediation mainly depends on their interaction interface with microbes and substrate. This review aims to comprehend the role of different carrier properties such as material shapes, pores, and surface area on bioremediation productivity. A porous biofilm carrier with surface ridges containing spherical pores sizes > 1 mm can be ideal for maximum efficacy. It provides diverse environments for cell cultures, develops uneven biofilms, and retains various cell sizes and biomass. Moreover, the thickness of biofilm and controlled scaling shows a significant impact on MBBR performance. Therefore, the effect of these parameters in MBBR is discussed detailed in this review, through which existing literature and technical strategies that focus on the surface area as the primary factor can be critically assessed.

Functionalization of Multi-Walled Carbon Nanotubes Changes Their Antibiofilm and Probiofilm Effects on Environmental Bacteria

Releasing multi-walled carbon nanotubes (MWCNTs) into ecosystems affects the biofilm formation and metabolic activity of bacteria in aquatic and soil environments. Pristine (pMWCNTs), oleophilic (oMWCNTs), hydrophilic (hMWCNTs), and carboxylated (cMWCNTs) carbon nanotubes were used to investigate their effects on bacterial biofilm. A pronounced probiofilm effect of modified MWCNTs was observed on the Gram-negative bacteria of Pseudomonas fluorescens C2, Acinetobacter guillouiae 11 h, and Alcaligenes faecalis 2. None of the studied nanomaterials resulted in the complete inhibition of biofilm formation. The complete eradication of biofilms exposed to MWCNTs was not observed. The functionalization of carbon nanotubes was shown to change their probiofilm and antibiofilm effects. Gram-negative bacteria were the most susceptible to destruction, and among the modified MWCNTs, oMWCNTs had the greatest effect on biofilm destruction. The number of living cells in the biofilms was assessed by the reduction of XTT, and metabolic activity was assessed by the reduction of resazurin to fluorescent resorufin. The biofilms formed in the presence of MWCNTs reduced tetrozolium to formazan more actively than the control biofilms. When mature biofilms were exposed to MWCNTs, dehydrogenase activity decreased in Rhodococcus erythropolis 4-1, A. guillouiae 11 h, and A. faecalis 2 in the presence of pMWCNTs and hMWCNTs, as well as in A. guillouiae 11 h exposed to cMWCNTs. When mature biofilms were exposed to pMWCNTs, hMWCNTs, and cMWCNTs, the metabolism of cells decreased in most strains, and oMWCNTs did not have a pronounced inhibitory effect. The antibiofilm and probiofilm effects of MWCNTs were strain-dependent.

Acceleration of start-up of moving bed biofilm reactor at low temperature by adding specialized quorum sensing bacteria

This study aims to accelerate biofilm formation and operational performance of moving bed biofilm reactor (MBBR) at 5 ℃ by adding specialized Quorum Sensing bacteria (sphingomonas rubra BH3^T). Results showed that bio augmented MBBR (R_S) achieved a higher chemical oxygen demand and NH₄⁺-N removal rate (93% and 75%), which in accordance with its increased biofilm thickness, higher biofilm activity, and nitrifying bacteria abundance (Nitrospira). The increased biofilm thickness (60.23 %) during the whole operating time, accompanied by more potent adhesion force (61.59 %), was related to increased polysaccharides and proteins in the biofilm. Pyrosequencing analysis indicated that BH3^T contributed to higher species richness and triggered the rapid growth of precursor microorganisms (Nakamurella, Micropruina, and Zoogloea) and the enrichment of multifunctional microorganisms (Pseudomonas, Aeromonas, Arcobacter, Dechloromonas, and Flavobacterium) at low temperatures. This study provides an economical and practical new insight into accelerating start-up of MBBR system at low temperature.

Exploiting Biofilm Characteristics to Enhance Biological Nutrient Removal in Wastewater Treatment Plants

Biological treatments are integral processes in wastewater treatment plants (WWTPs). They can be carried out using sludge or biofilm processes. Although the sludge process is effective for biological wastewater systems, it has some drawbacks that make it undesirable. Hence, biofilm processes have gained popularity, since they address the drawbacks of sludge treatments, such as the high rates of sludge production. Although biofilms have been reported to be essential for wastewater, few studies have reviewed the different ways in which the biofilm properties can be explored, especially for the benefit of wastewater treatment. Thus, this review explores the properties of biofilms that can be exploited to enhance biological wastewater systems. In this review, it is revealed that various biofilm properties, such as the extracellular polymeric substances (EPS), quorum sensing (Qs), and acylated homoserine lactones (AHLs), can be enhanced as a sustainable and cost-effective strategy to enhance the biofilm. Moreover, the exploitation of other biofilm properties such as the SOS, which is only reported in the medical field, with no literature reporting it in the context of wastewater treatment, is also recommended to improve the biofilm technology for wastewater treatment processes. Additionally, this review further elaborates on ways that these properties can be exploited to advance biofilm wastewater treatment systems. A special emphasis is placed on exploiting these properties in simultaneous nitrification and denitrification and biological phosphorus removal processes, which have been reported to be the most sensitive processes in biological wastewater treatment.

Current technologies and future perspectives for the treatment of complex petroleum refinery wastewater: A review

Petroleum refinery wastewater (PRW) is a complex mixture of hydrocarbons, sulphides, ammonia, oils, suspended and dissolved solids, and heavy metals. As these pollutants are toxic and recalcitrant, it is essential to address the above issue with efficient, economical, and eco-friendly technologies. In this review, initially, an overview of the characteristics of wastewater discharged from different petroleum refinery units is discussed. Further, various pre-treatment and post-treatment strategies for complex PRW are introduced. A segregated approach has been proposed to treat the crude desalting, sour, spent caustic, and oily wastewater of petroleum refineries. The combined systems (e.g., ozonation + moving bed biofilm reactor and photocatalysis + packed bed biofilm reactor) for the treatment of low biodegradability index wastewater (BOD₅/COD < 0.2) were discussed to construct a perspective map and implement the proposed system efficiently. The economic, toxicity, and biodegradability aspects are also introduced, along with research gaps and future scope.

Improved decolorization and mineralization of azo dye in an integrated system of anaerobic bioelectrochemical modules and aerobic moving bed biofilm reactor

In this study, a stacked integrated system with anaerobic bioelectrochemical system (BES) and aerobic moving bed biofilm reactor (MBBR) was developed to improve the decolorization and mineralization of azo dye. This stacked BES-MBBR exhibited better performance with acid orange (AO7) decolorization of 96.4 ± 0.6% and chemical oxygen demand (COD) removal of 87.7 ± 4.4%. Contribution of each module in the BES and MBBR stages indicated that BES modules enhanced the pretreatment process in AO7 decolorization, and MBBR played an important role in further removal of COD. The mechanism analysis indicated that the azo bond was cleaved with reductive decolorization at biocathode in the anaerobic BES stages, and then the intermediate products can be further oxidized with COD removal in the aerobic MBBR stage. This work demonstrated that the integrated system with stacked anaerobic BES and aerobic MBBR could provide a promising way for the pretreatment and post-treatment of refractory wastewater.

Biofilm formation and extracellular polymeric substance (EPS) production by Bacillus haynesii and influence of hexavalent chromium

Biofilm-forming bacteria play a key role in the removal of heavy metals including hexavalent chromium [Cr(VI)] from contaminated sites. In this study, biofilm-forming B. haynesii was examined for extracellular polymeric substances (EPS) production and hexavalent chromium [Cr(VI)] reduction potential. Exposure of B. haynesii with Cr(VI) (12.5-100 mg L^-1) for 48 h enhanced pellicle dry weight (20-24%), cell-size (5.1-23.2%) and cell granularity (8.5-19.2%). Also, EPS production was increased by 10-35% by promoting the synthesis of protein (94-119%) and polysaccharide (2-33%) components in EPS. Further, the reduction (27.7 %) and distribution (15.87%) of Cr(VI) were mainly mediated by EPS than the other cellular fractions. Findings of the study suggest that the EPS from B. haynesii was efficiently reduced to Cr(VI) present in aqueous medium and the potential of the organism can be further explored for the mitigation of Cr(VI) contamination.

Simultaneously pollutant removal and S0 recovery from composite wastewater containing Cr(VI)-S2- based on biofilm enhancement

Bioaugmentation of extracellular polymeric substances-producing bacteria was applied in pollutant removal and S⁰ recovery from composite wastewater in a mixotrophic denitrification system. In the presence of 200 mg·L^-1 S^2- and 50 mg·L^-1 Cr(VI), the removal efficiencies of chemical oxygen demand, NO₃^-, S^2- and Cr(VI) were 86.38%, 91.82%, 95.75%, and 100.00% respectively, while S⁰ recovery efficiency reached 79.17%. Increased contents of protein and polysaccharide, especially the high ratio of protein/polysaccharide verified the structural stability of biofilm was promoted by biofilm enhancement. The widespread distribution of bacteria/extracellular polymeric substance (EPS) revealed the more obvious biofilms formation in biofilm-enhanced group. High-throughput sequencing analysis showed that EPS-producing bacteria (Flavobacterium, Thauera, Thiobacillus and Simplicispira) were dominant bacteria in the biofilm-enhanced group. Moreover, by comprehensive considering of redundancy analysis, the colonization of selected bacteria improved the robustness of the reactor and treatment performance to wastewater contained toxic pollutions.

Novel intertidal wetland sediment-inoculated moving bed biofilm reactor treating high-salinity wastewater: Metagenomic sequencing revealing key functional microorganisms

In this study, two lab-scale moving bed biofilm reactors (MBBR), seeded with intertidal wetland sediment (IWS) and activated sludge (AS), were constructed to compare their performances in treating high-salinity (3%) wastewater. Under a wide range of influent TOC (178-620 mg/L) and NH₄⁺-N (25-100 mg/L), both the MBBRs (R_iws and R_as) exhibited excellent TOC removal efficiencies of >95%. Regarding nitrogen reduction, R_iws exhibited a significantly superior TN removal efficiency of 90.2 ± 1.8% than that of R_as (76.8 ± 2.9%). A correlation analysis was innovatively conducted comparing the results between metagenomic sequencing and DNA pyrosequencing, and positive linear relationships were found with R² values of 0.763-0.945. Meanwhile, for illustration of different TN removal performance, nitrogen metabolic pathways were also assessed. Moreover, a list of functional oxidases (EC: 1.13.11.1, EC: 1.13.11.2, EC: 1.13.11.24, EC: 1.13.12.16, EC: 1.4.3.4, EC: 1.16.3.3, EC: 1.14.14.28) was found in IWS, revealing its potential in degradation of recalcitrant organics.

A Comparison of Biosolids Production and System Efficiency between Activated Sludge, Moving Bed Biofilm Reactor, and Sequencing Batch Moving Bed Biofilm Reactor in the Dairy Wastewater Treatment

Dairy industry wastewater is rich in organic content, presenting a high biodegradability, and therefore biological treatments are widely employed. This study aimed to evaluate biosolids production in three systems: activated sludge (AS), movingbed biofilm reactor (MBBR), and sequencingbatch movingbed biofilm reactor (SBMBBR). Simulated dairy wastewater was used at different organic load rates (OLRs): 1.22, 2.87, and 5.44 gCOD L−1d−1. Besides biosolids production, COD, total carbon (TC), and total nitrogen (TN) removal efficiency was evaluated. Biosolids production was measured in the mixed liquor, carrier-adhered biomass, treated wastewater, and surplus sludge. The operational conditions were kept similar for the three systems, with a carrier filling ratio of 50% for MBBR and SBMBBR. The SBMBBR proved to have better performance in the removal efficiencies of COD, TC, and TN for all OLRs studied. The MBBR presented a similar COD and TC removal efficiency as the SBBR for the two highest OLRs (2.87 and 5.44 gCOD L−1d−1). Concerning biosolids production, the MBBR system produced less biomass and delivered the lowest amount of adhered biomass inside the carriers. The AS treatment generated the highest amount of sludge and offered the worst treatment capability for all OLRs evaluated.