Photoelectrochemical sensing for hydroquinone based on porphyrin-functionalized Au nanoparticles on graphene

Plasmonic Graphene-Gold Nanostar Heterojunction for Red-Light Photoelectrochemical Immunosensing of C-Reactive Protein

The development of red-light photoelectrochemical (PEC) nanoimmunosensors offers new avenues for detecting clinically relevant biomarkers with high sensitivity and specificity. Herein, the first PEC nanoimmunosensor based on a plasmonic graphene and gold nanostar (AuNS) heterojunction excited with 765 nm red light is presented for label-free detection of C-reactive protein (CRP), a key biomarker of inflammation. This platform leverages the unique localized surface plasmon resonance effect of AuNSs in combination with in situ generated graphene to enhance photoelectrical conversion efficiency under 765 nm monochromatic light. This wavelength minimizes photodamage and interference from biological samples. By optimizing the nanoarchitecture and utilizing a bifunctional photoactive transduction platform, a linear detection range of 25-800 pg/mL is achieved, with a limit of detection as low as 13.3 pg/mL. The low-energy red-light activation, effective electron-hole pair separation, and signal amplification allow CRP's rapid, selective, and sensitive detection in real clinical samples from patients with low-grade chronic inflammation. The nanoimmunosensor demonstrated consistent analytical performance across multiple samples, showing potential for accurate biomarker monitoring in inflammatory disorders. This work highlights plasmonic nanomaterials to develop robust PEC immunosensors that provide scalable, noninvasive, automated, low-background noise as a highly sensitive alternative for clinical diagnostics.

Recent Progress in Photoelectrochemical Sensing of Pesticides in Food and Environmental Samples: Photoactive Materials and Signaling Mechanisms

Pesticides have become an integral part of modern agricultural practices, but their widespread use poses a significant threat to human health. As such, there is a pressing need to develop effective methods for detecting pesticides in food and environmental samples. Traditional chromatography methods and common rapid detection methods cannot satisfy accuracy, portability, long storage time, and solution stability at the same time. In recent years, photoelectrochemical (PEC) sensing technology has gained attention as a promising approach for detecting various pesticides due to its salient advantages, including high sensitivity, low cost, simple operation, fast response, and easy miniaturization, thus becoming a competitive candidate for real-time and on-site monitoring of pesticide levels. This review provides an overview of the recent advancements in PEC methods for pesticide detection and their applications in ensuring food and environmental safety, with a focus on the categories of photoactive materials, from single semiconductor to semiconductor-semiconductor heterojunction, and signaling mechanisms of PEC sensing platforms, including oxidation of pesticides, steric hindrance, generation/decrease in sacrificial agents, and introduction/release of photoactive materials. Additionally, this review will offer insights into future prospects and confrontations, thereby contributing novel perspectives to this evolving domain.

Photoelectrochemical Behavior of Phthalocyanine-Sensitized TiO2 in the Presence of Electron-Shuttling Mediators

Dye-sensitized TiO₂ has found many applications for dye-sensitized solar cells (DSSC), solar-to-chemical energy conversion, water/air purification systems, and (electro)chemical sensors. We report an electrochemical system for testing dye-sensitized materials that can be utilized in photoelectrochemical (PEC) sensors and energy conversion. Unlike related systems, the reported system does not require a direct electron transfer from semiconductors to electrodes. Rather, it relies on electron shuttling by redox mediators. A range of model photocatalytic materials were prepared using three different TiO₂ materials (P25, P90, and PC500) and three sterically hindered phthalocyanines (Pcs) with electron-rich tert-butyl substituents (t-Bu₄PcZn, t-Bu₄PcAlCl, and t-Bu₄PcH₂). The materials were compared with previously developed TiO₂ modified by electron-deficient, also sterically hindered fluorinated phthalocyanine F₆₄PcZn, a singlet oxygen (¹O₂) producer, as well as its metal-free derivative, F₆₄PcH₂. The PEC activity depended on the redox mediator, as well as the type of TiO₂ and Pc. By comparing the responses of one-electron shuttles, such as K₄Fe(CN)₄, and ¹O₂-reactive electron shuttles, such as phenol, it is possible to reveal the action mechanism of the supported photosensitizers, while the overall activity can be assessed using hydroquinone. t-Bu₄PcAlCl showed significantly lower blank responses and higher specific responses toward chlorophenols compared to t-Bu₄PcZn due to the electron-withdrawing effect of the Al³⁺ metal center. The combination of reactivity insights and the need for only microgram amounts of sensing materials renders the reported system advantageous for practical applications.

One A3B Porphyrin Structure-Three Successful Applications

Porphyrins are versatile structures capable of acting in multiple ways. A mixed substituted A3B porphyrin, 5-(3-hydroxy-phenyl)-10,15,20-tris-(3-methoxy-phenyl)-porphyrin and its Pt(II) complex, were synthesised and fully characterised by 1H- and 13C-NMR, TLC, UV-Vis, FT-IR, fluorescence, AFM, TEM and SEM with EDX microscopy, both in organic solvents and in acidic mediums. The pure compounds were used, firstly, as sensitive materials for sensitive and selective optical and fluorescence detection of hydroquinone with the best results in the range 0.039-6.71 µM and a detection limit of 0.013 µM and, secondly, as corrosion inhibitors for carbon-steel (OL) in an acid medium giving a best performance of 88% in the case of coverings with Pt-porphyrin. Finally, the electrocatalytic activity for the hydrogen and oxygen evolution reactions (HER and OER) of the free-base and Pt-metalated A3B porphyrins was evaluated in strong alkaline and acidic electrolyte solutions. The best results were obtained for the electrode modified with the metalated porphyrin, drop-casted on a graphite substrate from an N,N-dimethylformamide solution. In the strong acidic medium, the electrode displayed an HER overpotential of 108 mV, at i = -10 mA/cm2 and a Tafel slope value of 205 mV/dec.

Advanced applications of chemo-responsive dyes based odor imaging technology for fast sensing food quality and safety: A review

Public attention to foodquality and safety has been increased significantly. Therefore, appropriate analytical tools are needed to analyze and sense the food quality and safety. Volatile organic compounds (VOCs) are important indicators for the quality and safety of food products. Odor imaging technology based on chemo-responsive dyes is one of the most promising methods for analysis of food products. This article reviews the sensing and imaging fundamentals of odor imaging technology based on chemo-responsive dyes. The aim is to give detailed outlines about the theory and principles of using odor imaging technology for VOCs detection, and to focus primarily on its applications in the field of quality and safety evaluation of food products, as well as its future applicability in modern food industries and research. The literatures presented in this review clearly demonstrated that imaging technology based on chemo-responsive dyes has the exciting effect to inspect such as quality assessment of cereal , wine and vinegar flavored foods , poultry meat, aquatic products, fruits and vegetables, and tea. It has the potential for the rapid, reliable, and inline assessment of food safety and quality by providing odor-image-basedmonitoring tool. Practical Application: The literatures presented in this review clearly demonstrated that imaging technology based on chemo-responsive dyes has the exciting effect to inspect such as quality assessment of cereal , wine and vinegar flavored foods, poultry meat, aquatic products, fruits and vegetables, and tea.

Effect of CO adsorption on properties of transition metal doped porphyrin: A DFT and TD-DFT study

The structural, electronic and optical properties of transition metal doped porphyrin (TM@P; TM = Mn, Co, Fe, Cu, Ni, Zn) as well as the effect of CO adsorption on TM@P properties have been investigated using the density functional theory (DFT). The presented results include adsorption energies, bond lengths, electronic configurations, magnetic moments, density of states, frontier molecular orbitals, and UV-Vis. spectra. Our calculation results show that, the CO molecule favors to be adsorbed on TM-doped Porphyrin with its carbon head. The most energetically stable adsorption of CO is reported for Fe doped Porphyrin. The interaction between CO molecules with TM@P is attributed to donation-back donation as well as charge transfer mechanisms. Mn, Co and Fe-doped porphyrins have visible active nature which may be affected by CO adsorption, whereas, Ni, Cu and Zn-doped porphyrins have UV active nature which not affected by CO adsorption. These results may be meaningful for CO removal and detection.

Ag and Au nanoparticles/reduced graphene oxide composite materials: Synthesis and application in diagnostics and therapeutics

The exceptional electrical, thermal, optical and mechanical properties have made two dimensional sp² hybridized graphene a material of choice in both academic as well as industrial research. In the last few years, researchers have devoted their efforts towards the development of graphene/polymer, graphene/metal nanoparticle and graphene/ceramic nanocomposites. These materials display excellent mechanical, electrical, thermal, catalytic, magnetic and optical properties which cannot be obtained separately from the individual components. Fascinating physical and chemical properties are displayed by noble metal nanomaterials and thus they represent model building blocks for modifying nanoscale structures for diverse applications extending from catalysis, optics to nanomedicine. Insertion of noble metal (Au, Ag) nanoparticles (NPs) into chemically derived graphene is thus of primary importance to open new avenues for both materials in various fields where the specific properties of each material act synergistically to provide hybrid materials with exceptional performances. This review attempts to summarize the different synthetic procedures for the preparation of Ag and Au NPs/reduced graphene oxide (rGO) composites. The synthesis processes of metal NPs/rGO composites are categorised into in-situ and ex-situ techniques. The in-situ approach consists of simultaneous reduction of metal salts and GO to obtain metal NPs/rGO nanocomposite materials, while in the ex-situ process, the metal NPs of desired size and shape are first synthesized and then transferred onto the GO or rGO matrix. The application of the Ag NPs and Au NPs/rGO composite materials in the area of biomedical (drug delivery and photothermal therapy) and biosensing are the focus of this review article.

Highly sensitive detection of microcystin-LR under visible light using a self-powered photoelectrochemical aptasensor based on a CoO/Au/g-C3N4 Z-scheme heterojunction

Based on the unique photoelectrochemical properties of a CoO/Au/g-C₃N₄ Z-scheme heterojunction, a self-powered photoelectrochemical (PEC) aptasensor was constructed for the detection of microcystin-leucine arginine (MC-LR). Z-scheme heterojunctions can promote the separation of a photo-induced electron-hole pair, and the surface plasmonic resonance (SPR) of Au nanoparticles can significantly enhance the adsorption of visible light. Importantly, MC-LR molecules were captured by aptamers initially immobilized on the modified electrode due to their high affinity, and then oxidized by the photogenerated holes, which caused an amplified photocurrent signal, allowing the quantitative analysis of MC-LR by measuring the photocurrent intensity change. This PEC MC-LR aptasensor showed high sensitivity and selectivity within a wide linear response range from 0.1 pM to 10 nM and a detection limit of 0.01 pM. The application of this sensor in the analysis of lake water samples provided accurate results with a relative standard deviation (RSD) of 2.6%-4.2%.

Photoconductivity in Metal-Organic Framework (MOF) Thin Films

Photoconductivity is a characteristic property of semi-conductors. Herein, we present a photo-conducting crystalline metal-organic framework (MOF) thin film with an on-off photocurrent ratio of two orders of magnitude. These oriented, surface-mounted MOF thin films (SURMOFs), contain porphyrin in the framework backbone and C₆₀ guests, loaded in the pores using a layer-by-layer process. By comparison with results obtained for reference MOF structures and based on DFT calculations, we conclude that donor-acceptor interactions between the porphyrin of the host MOF and the C₆₀ guests give rise to a rapid charge separation. Subsequently, holes and electrons are transported through separate channels formed by porphyrin and by C₆₀ , respectively. The ability to tune the properties and energy levels of the porphyrin and fullerene, along with the controlled organization of donor-acceptor pairs in this regular framework offers potential to increase the photoconduction on-off ratio.

Oligonucleotide-modulated photocurrent enhancement of a tetracationic porphyrin for label-free homogeneous photoelectrochemical biosensing

This work reports the first demonstration of an oligonucleotide-modulated label-free homogeneous photoelectrochemical (PEC) biosensing platform based on the adsorption of tetracationic porphyrin (denoted as TMPyP here) onto 1-naphthalenesulfonate anion (NS^-)-grafted indium tin oxide electrode (denoted as TMPyP-NS^--ITO), which generates a stable and rapid photocurrent response. We found that when NS^--ITO electrode was subjected to single-stranded oligonucleotide (ssON) before TMPyP adsorption, a remarkable enhancement of photocurrent intensity was observed from the resulted TMPyP-ssON-NS^--ITO electrode with high specificity towards oligonucleotide. A series of investigations were carried out to understand the mechanism of this oligonucleotide-modulated photocurrent enhancement phenomenon. Moreover, the studies of this robust photocurrent enhancement mechanism was successfully extended to develop a signal-on homogeneous PEC biosensing platform for, as a proof-of-concept, label-free M.SssI methyltransferase activity analysis through a judiciously and compatibly engineered signal transduction strategy consisted of hairpin-shaped oligonucleotide probe, restriction endonuclease HpaII, and Exonuclease I. The rationally designed homogeneous PEC biosensor exhibit sensitive PEC response toward M.SssI methyltransferase with a low detection limit of 3.5 mU/mL and a wide linear range from 0.01 to 120 U/mL. Additionally, we show that our homogeneous PEC biosensing platform can be also utilized to screen methyltransferase inhibitors. Therefore, this work will provide a distinctive paradigm for versatile homogeneous PEC biosensing platform that can be used as potential powerful tool toward innovative label-free bioanalytical purposes.

Gold Nanoparticles Decorated Hematite Photoelectrode for Sensitive and Selective Photoelectrochemical Aptasensing of Lysozyme

Photoelectrochemical aptasensor (PECAS) is a new and promising detection platform with both high sensitivity and good selectivity. Exploration of new photoelectrode materials and establishment of effective charge transfer channel between photoelectrode and aptamer are the main challenges in this field. In this work, an efficient PECAS based on Au nanoparticles (NPs) decorated Fe₂O₃ nanorod photoelectrode is rationally designed, fabricated, and exhibited excellent sensitivity and selectivity for detection of lysozyme (Lys) with an ultralow detection limit of 3 pM and wide detection range from 10 pM to 100 nM. The Au NPs not only act as anchor to establish an efficient charge transfer channel between the photoelectrode and the aptamer, but also help to enhance the PEC performance through adjusting the carrier density of Fe₂O₃. The rationally designed photoelectrode opens up a distinctive avenue for promoting the PECAS to be a versatile analysis method.

Preparation of GO-COOH/AuNPs/ZnAPTPP nanocomposites based on the π-π conjugation: Efficient interface for low-potential photoelectrochemical sensing of 4-nitrophenol

The GO-COOH/AuNPs/ZnAPTPP nanocomposites were constructed using zinc monoamino porphyrin (ZnAPTPP) through π-π conjugation with carboxylated graphene oxide (GO-COOH) loaded with Au nanoparticles (AuNPs). Prepared materials were characterized by ¹H NMR spectra, UV-vis absorption spectroscopy and electrochemical impedance spectroscopy. ITO electrode surface was modified with the prepared nanocomposites showed a good photocurrent response when the bias potential, -0.1V was applied. Nanocomposites modified ITO electrode exhibited good photo-response to the 4-nitrophenol (4-NP). ZnAPTPP were excited from HOMO to LUMO under light irradiation, the photoexcited electrons injected into the conduction band of GO-COOH, and then transferred to AuNPs further to the ITO. The presence of GO-COOH and AuNPs improved the separation of photogenerated charges due to their synergetic effect and excellent conductivity. Externally added 4-NP scavenges the photogenerated holes i.e. it acts as a sacrificial electron donor thereby it enhances the photocurrent of the system. Based on this interaction, a novel method for photoelectrochemical detection of 4-NP was developed with a linear range from 0.1 to 15nmol/L (r = 0.996) and detection limit of 0.04nmol/L (S/N = 3). Proposed method is simple and sensitive and this was successfully applied for the quantification 4-NP in river water sample matrices.

TiO2-BiVO4 Heterostructure to Enhance Photoelectrochemical Efficiency for Sensitive Aptasensing

This work designed a nanocomposite to enhance the photoelectrochemical (PEC) efficiency by depositing BiVO₄ nanoparticles on TiO₂ nanospheres with a solvothermal method. The TiO₂-BiVO₄ heterostructure was characterized with various spectroscopic and microscopic techniques and was employed as a nanostructured support to cross-link DNA aptamer for constructing a visible-light driven PEC aptasensor. The TiO₂ nanospheres provided a biocompatible microenvironment, and the high surface area of the heterostructure enhanced the loading of aptamer molecules. The small energy gap of BiVO₄ improved the PEC property of the nanocomposite compared with the pure TiO₂ under visible-light irradiation. The advantages of the nanocomposite along with the high loading of recognition molecules greatly improved the sensitivity of the aptasensor. Using 17β-estradiol as an analyst model, the proposed PEC biosensor showed excellent analytical performance with high sensitivity, low detection limit of 0.022 pM, and high selectivity in a detectable concentration range of 0.1-250 pM, indicating the promising application of the designed TiO₂-BiVO₄ heterostructure in PEC biosensing.

Noble metal nanoparticles in biosensors: recent studies and applications

The aim of this review is to cover advances in noble metal nanoparticle (MNP)-based biosensors and to outline the principles and main functions of MNPs in different classes of biosensors according to the transduction methods employed. The important biorecognition elements are enzymes, antibodies, aptamers, DNA sequences, and whole cells. The main readouts are electrochemical (amperometric and voltametric), optical (surface plasmon resonance, colorimetric, chemiluminescence, photoelectrochemical, etc.) and piezoelectric. MNPs have received attention for applications in biosensing due to their fascinating properties. These properties include a large surface area that enhances biorecognizers and receptor immobilization, good ability for reaction catalysis and electron transfer, and good biocompatibility. MNPs can be used alone and in combination with other classes of nanostructures. MNP-based sensors can lead to significant signal amplification, higher sensitivity, and great improvements in the detection and quantification of biomolecules and different ions. Some recent examples of biomolecular sensors using MNPs are given, and the effects of structure, shape, and other physical properties of noble MNPs and nanohybrids in biosensor performance are discussed.

Photoelectrochemical DNA Biosensor Based on Dual-Signal Amplification Strategy Integrating Inorganic-Organic Nanocomposites Sensitization with λ-Exonuclease-Assisted Target Recycling

Sensitive and accurate analysis of DNA is crucial to better understanding of DNA functions and early diagnosis of fatal disease. Herein, an enhanced photoelectrochemical (PEC) DNA biosensor was proposed based on dual-signal amplification via coupling inorganic-organic nanocomposites sensitization with λ-exonuclease (λ-Exo)-assisted target recycling. The short DNA sequence about chronic myelogenous leukemia (CML, type b3a2) was selected as target DNA (tDNA). ZnO nanoplates were deposited with CdS nanocrystals to form ZnO/CdS hetero-nanostructure, and it was used as PEC substrate for immobilizing hairpin DNA (hDNA). CdTe quantum dots (QDs) covalently linked with meso-tetra(4-carboxyphenyl)porphine (TCPP) to form CdTe/TCPP inorganic-organic nanocomposites, which were utilized as sensitization agents labeling at the terminal of probe DNA (pDNA). When the hDNA-modified sensing electrode was incubated with tDNA and λ-Exo, hDNA hybridized with tDNA, and meanwhile it could be recognized and cleaved by λ-Exo, resulting in the release of tDNA. The rest of nonhybridized hDNA would continuously hybridize with the released tDNA, cleave by λ-Exo, and set free the tDNA again. After λ-Exo-assisted tDNA recycling, more amounts of short DNA (sDNA) fragments coming from digestion of hDNA produced on the electrode and hybridized with CdTe/TCPP-labeled pDNA (pDNA-CdTe/TCPP conjugates). In this case, the sensitization of CdTe/TCPP inorganic-organic nanocomposites occurred, which evidently extend the absorption range and strengthened the absorption intensity of light energy, and accordingly the photocurrent signal significantly promoted. Through introducing the dual-signal amplification tactics, the developed PEC assay allowed a low calculated detection limit of 25.6 aM with a wide detection scope from 0.1 fM to 5 pM for sensitive and selective determination of tDNA.

A Novel Electrochemiluminescence Immunosensor for the Analysis of HIV-1 p24 Antigen Based on P-RGO@Au@Ru-SiO₂ Composite

Ru(bpy)3(2+)-doped silica (Ru-SiO2) nanoparticles and gold-nanoparticle-decorated graphene (P-RGO@Au) were combined to form a P-RGO@Au@Ru-SiO2 composite. The composite was used to develop a novel sandwich-type electrochemiluminescence immunosensor for the analysis of HIV-1 p24 antigen. The composite worked as carrier to immobilize target antibody and to build a sandwich-type electrochemiluminescence immunosensor through an interaction between antigen and antibody. Importantly, high ECL signal could be obtained due to the large amounts of Ru(bpy)3(2+) molecules per Ru-SiO2 nanoparticle. The P-RGO@Au composite with good conductivity and high surface area not only accelerated the electron transfer rate but also improved the loading of both ECL molecules and capture antibody, which could further increase the ECL response and result in high sensitivity. Taking advantage of both Ru-SiO2 nanoparticles and the P-RGO@Au composite, the proposed immunosensor exhibited a linear range from 1.0 × 10(-9) to 1.0 × 10(-5) mg mL(-1) with a detection limit of 1.0 × 10(-9) mg mL(-1) for HIV-1 p24 antigen. The proposed ECL immunosensor was used to analyze HIV-1 p24 antigen in human serum, and satisfactory recoveries were obtained, indicating that the proposed method is promising for practical applications in the clinical diagnosis of HIV infection.

Experimental Sensing and Density Functional Theory Study of H2S and SOF2 Adsorption on Au-Modified Graphene

A gas sensor is used to detect SF6 decomposed gases, which are related to insulation faults, to accurately assess the insulated status of electrical equipment. Graphene films (GrF) modified with Au nanoparticles are used as an adsorbent for the detection of H2S and SOF2, which are two characteristic products of SF6 decomposed gases. Sensing experiments are conducted at room temperature. Results demonstrate that Au-modified GrF yields opposite responses to the tested gases and is thus considered a promising material for developing H2S- and SOF2-selective sensors. The first-principles approach is applied to simulate the interaction between the gases and Au-modified GrF systems and to interpret experimental data. The observed opposite resistance responses can be attributed to the charge-transfer differences related to the interfacial interaction between the gases and systems. The density of states and Mulliken population analysis results confirm the apparent charge transfer in Au-modified GrF chemisorption, whereas the van der Waals effect dominates the pristine graphene adsorption systems. Calculation results can also explicate the significant SOF2 responses on Au-modified GrF. This work is important in graphene modulation and device design for selective detection.

Synthesis, characterization, and photocurrent generation of a new nanocomposite based Cu–TCPP MOF and ZnO nanorod

Schematic representation of the Cu–TCPP MOF/ZnO (15%) nanocomposite on an FTO substrate in the photoelectrochemical cell and the mechanism of the photocurrent generation (the chemical potentials were calculated by cyclic voltammetry measurement).

Enhanced photoelectrochemical property of ZnO nanorods array synthesized on reduced graphene oxide for self-powered biosensing application

We have realized the direct synthesis of ZnO nanorods (ZnO NRs) array on reduced graphene layer (rGO), and demonstrated the enhanced photoelectrochemical (PEC) property of the rGO/ZnO based photoanode under UV irradiation compared with the pristine ZnO NRs array. The introduction of the rGO layer resulted in a favorable energy band structure for electron migration, which finally led to the efficient photoinduced charge separation. Such nanostructure was subsequently employed for self-powered PEC biosensing of glutathione in the condition of 0 V bias, with a linear range from 10 to 200 µM, a detection limit of 2.17 µM, as well as excellent selectivity, reproducibility and stability. The results indicated the rGO/ZnO nanostructure is a competitive candidate in the PEC biosensing field.

Integrated graphene/nanoparticle hybrids for biological and electronic applications

The development of novel graphene/nanoparticle hybrid materials is currently the subject of tremendous research interest. The intrinsic exceptional assets of both graphene (including graphene oxide and reduced graphene oxide) and nanoparticles render their hybrid materials synergic properties that can be useful in various applications. In this feature review, we highlight recent developments in graphene/nanoparticle hybrids and their promising potential in electronic and biological applications. First, the latest advances in synthetic methods for the preparation of the graphene/nanoparticle hybrids are introduced, with the emphasis on approaches to (1) decorate nanoparticles onto two-dimensional graphene and (2) wrap nanoparticles with graphene sheets. The pros and cons of large-scale synthesis are also discussed. Then, the state-of-the-art of graphene/nanoparticle hybrids in electronic and biological applications is reviewed. For electronic applications, we focus on the advantages of using these hybrids in transparent conducting films, as well as energy harvesting and storage. Biological applications, electrochemical biosensing, bioimaging, and drug delivery using the hybrids are showcased. Finally, the future research prospects and challenges in this rapidly developing area are discussed.

Synergistic metal-metal oxide nanoparticles supported electrocatalytic graphene for improved photoelectrochemical glucose oxidation

We report the fabrication of graphene-WO3-Au hybrid membranes and evaluate their photocatalytic activity towards glucose oxidase mediated enzymatic glucose oxidation. The dual-functionality of gold nanoparticles in the reinforcement of visible light activity of graphene-WO3 membranes and improving the catalytic activity of immobilized enzymes for unique photoelectrochemical sensing application is demonstrated. This work provides new insights into the fabrication of light-sensitive hybrid materials and facilitates their application in future.

In situ generated AgBr-enhanced ZnO nanorod-based photoelectrochemical aptasensing via layer-by-layer assembly

A robust aptasensor for Ag(+) was proposed for the first time using an enhanced ZnO nanorod-based photoelectrochemistry by in situ generated AgBr via layer-by-layer assembly. This work opens up new avenues for application of one-dimensional ZnO nanorod arrays in photoelectrochemical sensing. Additionally, the strategy of employing in situ generated narrow-bandgap semiconductors paves a new way for photoelectrochemical sensing.

Surface morphology and optical properties of porphyrin/Au and Au/porphyrin/Au systems

Porphyrin/Au and Au/porphyrin/Au systems were prepared by vacuum evaporation and vacuum sputtering onto glass substrate. The surface morphology of as-prepared systems and those subjected to annealing at 160°C was studied by optical microscopy, atomic force microscopy, and scanning electron microscopy techniques. Absorption and luminescence spectra of as-prepared and annealed samples were measured. Annealing leads to disintegration of the initially continuous gold layer and formation of gold nanoclusters. An amplification of Soret band magnitude was observed on the Au/meso-tetraphenyl porphyrin (TPP) system in comparison with mere TPP. Additional enhancement of luminescence was observed after the sample annealing. In the case of sandwich Au/porphyrin/Au structure, suppression of one of the two porphyrins' luminescence maxima and sufficient enhancement of the second one were observed.