Lateral flow biosensor for DNA extraction-free detection of Salmonella based on aptamer mediated strand displacement amplification

Advances in aptamer-based biosensors for monitoring foodborne pathogens

Biosensors are analytical devices for detecting a wide range of targets, including cells, proteins, DNA, enzymes, and chemical and biological compounds. They mostly rely on using bioprobes with a high binding affinity to the target for specific detection. However, low specificity and effectiveness of the conventional biosensors has led to the search for novel materials, that can specifically detect biomolecules. Aptamers are a group of single-stranded DNA or RNA oligonucleotides, that can bind to their targets with high specificity and serve as effective bioprobes for developing aptamer-based biosensors. Aptamers have a shorter production time, high stability, compared to traditional bioprobes, and possess ability to develop them for specific target molecules for tailored applications. Thus, various aptasensing approaches, including electrochemical, optical, surface plasmon resonance and chip-dependent approaches, have been investigated in recent times for various biological targets, including foodborne pathogens. Hence, this article is an overview of various conventional foodborne pathogen detection methods, their limitations and the ability of aptamer-based biosensors to overcome those limitations and replace them. In addition, the current status and advances in aptamer-based biosensors for the detection of foodborne pathogens to ensure food safety were also discussed.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05889-8.

A Proof-of-Concept Protein Microarray-Based Approach for Serotyping of Salmonella enterica Strains

Salmonella enterica, a bacterium causing foodborne illnesses like salmonellosis, is prevalent in Europe and globally. It is found in food, water, and soil, leading to symptoms like diarrhea and fever. Annually, it results in about 95 million cases worldwide, with increasing antibiotic resistance posing a public health challenge. Therefore, it is necessary to detect and serotype Salmonella for several reasons. The identification of the serovars of Salmonella enterica isolates is crucial to detect and trace outbreaks and to implement effective control measures. Our work presents a protein-based microarray for the rapid and accurate determination of Salmonella serovars. The microarray carries a set of antibodies that can detect different Salmonella O- and H-antigens, allowing for the identification of multiple serovars, including Typhimurium and Enteritidis, in a single miniaturized assay. The system is fast, economical, accurate, and requires only small sample volumes. Also, it is not required to maintain an extensive collection of sera for the serotyping of Salmonella enterica serovars and can be easily expanded and adapted to new serovars and sera. The scientific state of the art in Salmonella serotyping involves the comparison of traditional, molecular, and in silico methods, with a focus on economy, multiplexing, accuracy, rapidity, and adaptability to new serovars and sera. The development of protein-based microarrays, such as the one presented in our work, contributes to the ongoing advancements in this field.

Lateral Flow Biosensor for On-Site Multiplex Detection of Viruses Based on One-Step Reverse Transcription and Strand Displacement Amplification

Respiratory pathogens pose a huge threat to public health, especially the highly mutant RNA viruses. Therefore, reliable, on-site, rapid diagnosis of such pathogens is an urgent need. Traditional assays such as nucleic acid amplification tests (NAATs) have good sensitivity and specificity, but these assays require complex sample pre-treatment and a long test time. Herein, we present an on-site biosensor for rapid and multiplex detection of RNA pathogens. Samples with viruses are first lysed in a lysis buffer containing carrier RNA to release the target RNAs. Then, the lysate is used for amplification by one-step reverse transcription and single-direction isothermal strand displacement amplification (SDA). The yield single-strand DNAs (ssDNAs) are visually detected by a lateral flow biosensor. With a secondary signal amplification system, as low as 20 copies/μL of virus can be detected in this study. This assay avoids the process of nucleic acid purification, making it equipment-independent and easier to operate, so it is more suitable for on-site molecular diagnostic applications.

CRISPR-Cas12a-Mediated Hue-Recognition Lateral Flow Assay for Point-of-Need Detection of Salmonella

Nucleic acid detection of pathogens in a point-of-need (PON) manner is of great significance yet remains challenging for sensitive and accurate visual discrimination. Here, we report a CRISPR-Cas12a-mediated lateral flow assay for PON detection of Salmonella typhimurium (S.ty) that is a prevailing pathogen disseminated through tainted food. The variation of the fluorescence color of the test line is exploited to interpret the results, enabling the discrimination between positive and negative samples on the basis of a hue-recognition mechanism. By leveraging the cleavage activity of Cas12a and hue-recognition readout, the assay facilitated by recombinase polymerase amplification can yield a visual detection limit of 1 copy μL-1 for S.ty genomic DNA within 1 h. The assay also displays a high specificity toward S.ty in fresh chicken samples, as well as a sensitivity 10-fold better than that of the commercial test strip. Moreover, a semiquantitative detection of S.ty ranging from 0 to 4 × 103 CFU/mL by the naked eye is made possible, thanks to the easily discernible color change of the test line. This approach provides an easy, rapid, accurate, and user-friendly solution for the PON detection of Salmonella and other pathogens.

An insight into biosensing platforms used for the diagnosis of various lung diseases: A review

Many of the infectious diseases are ubiquitous in nature and pose a threat to global and public health. The original cause for such type of serious maladies can be summarized as the scarcity of appropriate analysis and treatment methods. Pulmonary diseases are considered one of the life-threatening lung diseases that affect millions of people globally. It consists of several types, namely, asthma, lung cancer, tuberculosis, chronic obstructive pulmonary disease, and several respiratory-related infections. This is due to the limited access to well-equipped healthcare facilities for early disease diagnosis. This needs the availability of processes and technologies that can help to stop this harmful disease-diagnosing practice. Various approaches for diagnosing various lung diseases have been developed over time, namely, autopsy, chest X-rays, low-dose CT scans, and so forth. The need of the hour is to develop a rapid, simple, portable, and low-cost method for the diagnosis of pulmonary diseases. So nowadays, biosensors have been becoming one of the highest priority research areas as a potentially useful tool for the early diagnosis and detection of many pulmonary lung diseases. In this review article, various types of biosensors and their applications in the diagnosis of lung-related disorders are expansively explained.

Strategy of functional nucleic acids-mediated isothermal amplification for detection of foodborne microbial contaminants: A review

Foodborne microbial contamination (FMC) is the leading cause of food poisoning and foodborne illness. The foodborne microbial detection methods based on isothermal amplification have high sensitivity and short detection time, and functional nucleic acids (FNAs) could extend the detectable object of isothermal amplification to mycotoxins. Therefore, the strategy of FNAs-mediated isothermal amplification has been emergingly applied in biosensors for foodborne microbial contaminants detection, making biosensors more sensitive with lower cost and less dependent on nanomaterials for signal output. Here, the mechanism of six isothermal amplification technologies and their application in detecting FMC is firstly introduced. Then the strategy of FNAs-mediated isothermal amplification is systematically discussed from perspectives of FNAs' versatility including recognition elements (Aptamer, DNAzyme), programming tools (DNA tweezer, DNA walker and CRISPR-Cas) and signal units (G-quadruplex, FNAs-based nanomaterials). Finally, challenges and prospects are presented in terms of addressing the issue of nonspecific amplification reaction, developing better FNAs-based sensing elements and eliminating food matrix effects.

Lateral flow assay of pathogenic viruses and bacteria in healthcare

Healthcare-associated pathogenic viruses and bacteria can have a serious impact on human health and have attracted widespread global attention. The lateral flow assay is a unidirectional detection based on the binding of a target analyte and a bioreceptor on the device via lateral flow. With incredible advantages over traditional chromatographic methods, such as rapid detection, ease of manufacture and cost effectiveness, these test strips are increasingly considered the ideal form for point-of-care applications. This review explores lateral flow assays for pathogenic viruses and bacteria, with a particular focus on methodologies, device components, construction methods, and applications. We anticipate that this review could provide exciting opportunities for developing new lateral flow devices for pathogens and advance related healthcare applications.

A dual-mode ratiometric aptasensor for accurate detection of pathogenic bacteria based on recycling of DNAzyme activation

Pathogenic bacteria have a significant impact on food safety. Herein, an innovative dual-mode ratiometric aptasensor was constructed for ultrasensitive and accurate detection of Staphylococcus aureus (S. aureus) based on recycling of DNAzyme activation on gold nanoparticles-functionalized MXene nanomaterials (MXene@Au NPs). Electrochemiluminescent (ECL) emitter-labeled probe DNA (probe 2-Ru) containing the blocked DNAzyme was partly hybridized with aptamer and then captured by electrochemical (EC) indicator-labeled probe DNA (probe 1-MB) on electrode surface. When S. aureus presented, the conformation vibration of probe 2-Ru activated the blocked DNAzymes, leading to recycling cleavage of probe 1-MB and ECL tag close to electrode surface. Based on the reverse change tendencies of ECL and EC signals, aptasensor achieved S. aureus quantification from 5 to 10⁸ CFU/mL. Moreover, the self-calibration characteristic of the aptasensor with dual-mode ratiometric readout ensured the reliable measurement of S. aureus in real samples. This work showed useful insight into sensing foodborne pathogenic bacteria.

Biosensors for point-of-care testing and personalized monitoring of gastrointestinal microbiota

The gastrointestinal (GI) microbiota is essential in maintaining human health. Alteration of the GI microbiota or gut microbiota (GM) from homeostasis (i.e., dysbiosis) is associated with several communicable and non-communicable diseases. Thus, it is crucial to constantly monitor the GM composition and host-microbe interactions in the GI tract since they could provide vital health information and indicate possible predispositions to various diseases. Pathogens in the GI tract must be detected early to prevent dysbiosis and related diseases. Similarly, the consumed beneficial microbial strains (i.e., probiotics) also require real-time monitoring to quantify the actual number of their colony-forming units within the GI tract. Unfortunately, due to the inherent limitations associated with the conventional methods, routine monitoring of one's GM health is not attainable till date. In this context, miniaturized diagnostic devices such as biosensors could provide alternative and rapid detection methods by offering robust, affordable, portable, convenient, and reliable technology. Though biosensors for GM are still at a relatively preliminary stage, they can potentially transform clinical diagnosis in the near future. In this mini-review, we have discussed the significance and recent advancements of biosensors in monitoring GM. Finally, the progresses on future biosensing techniques such as lab-on-chip, smart materials, ingestible capsules, wearable devices, and fusion of machine learning/artificial intelligence (ML/AI) have also been highlighted.

Digital Pregnancy Test Powered by an Air-Breathing Paper-Based Microfluidic Fuel Cell Stack Using Human Urine as Fuel

The direct integration of paper-based microfluidic fuel cells (μFC's) toward creating autonomous lateral flow assays has attracted attention. Here, we show that an air-breathing paper-based μFC could be used as a power supply in pregnancy tests by oxidizing the human urine used for the diagnosis. We present an air-breathing paper-based μFC connected to a pregnancy test, and for the first time, as far as we know, it is powered by human urine without needing any external electrolyte. It uses TiO2-Ni as anode and Pt/C as cathode; the performance shows a maximum value of voltage and current and power densities of ∼0.96 V, 1.00 mA cm-2, and 0.23 mW cm-2, respectively. Furthermore, we present a simple design of a paper-based μFC's stack powered with urine that shows a maximum voltage and maximum current and power densities of ∼1.89 V, 2.77 mA cm-2 and 1.38 mW cm-2, respectively, which powers the display of a pregnancy test allowing to see the analysis results.

Recent developments of aptamer-based lateral flow assays for point-of-care (POC) diagnostics

In the field of lateral flow assay (LFA), the application of aptamer as a bioreceptor has been implemented to overcome the limitations of antibodies, such as tedious in vivo processes, short shelf-life, and functionalization issues. To address these limitations aptamer-based LFA (ALFA) is preferred to antibody-based LFA that produces higher sensitivity and specificity. In principle, aptamers have a strong affinity towards their targets like small, large, and non-immunogenic molecules because of their high affinity, sensitivity, low dissociation constant, cost-effectiveness, and flexible nature. Thus, ALFA can be considered an efficient biosensor model for its superior portability, rapid detection with quick turnaround time, and usability by a non-technical person at any location with simple visual output. This review concisely overviews ALFA, its principles, formats, aptamer selection process, and biomedical applications. In addition, the critical components to design, develop, test, and amplify signals to create ALFA are discussed in brief. In addition, the aspects of conceptualization of ALFA product transforming from bench-side laboratory design and fabrication to commercial market are addressed in detail.

Small ubiquitin-related modifier-fused bacteriophage tail fiber protein with favorable aqueous solubility for lateral flow assay of Pseudomonas aeruginosa

Rapid and sensitive assay of pathogenic bacteria is critical for minimizing the risk of infectious diseases. Inspired by the interaction between bacteriophages and host bacteria, we obtained a gene sequence of tail fiber protein (TFP) from Pseudomonas aeruginosa (P. aeruginosa) bacteriophage. Then the gene sequence was used to express a recombinant TFP, which can act as a potential capture molecule for P. aeruginosa. Small ubiquitin-related modifier (SUMO) tag was fused onto the TFP fragment to overcome its unfavorable aqueous solubility. The obtained SUMO tag-fused TFP (STFP) can be uniformly distributed onto a nitrocellulose membrane to form a test line due to the improved aqueous solubility, which facilities fabrication of a lateral flow assay strip. Thus we developed a lateral flow assay method by using STFP as a capture molecule and AuCo nanoparticles-labeled aptamer as a signal tracer for point-of-care testing of P. aeruginosa. By using the test strip, P. aeruginosa can be semi quantified with color band and quantified with chemiluminescent (CL) signal catalyzed by AuCo nanoparticles. The concentration range for quantification is 3.3 × 10² CFU/mL to 3.3 × 10⁷ CFU/mL. The test strip was applied to assay P. aeruginosa in different sample matrixes including cerebrospinal fluid, physiological salt solution, drinking water and pear juice. The results demonstrate the application potential of the STFP-based lateral flow assay for medical diagnosis, food and drug safety monitoring.

Point-of-Care Diagnostics for Farm Animal Diseases: From Biosensors to Integrated Lab-on-Chip Devices

Zoonoses and animal diseases threaten human health and livestock biosecurity and productivity. Currently, laboratory confirmation of animal disease outbreaks requires centralized laboratories and trained personnel; it is expensive and time-consuming, and it often does not coincide with the onset or progress of diseases. Point-of-care (POC) diagnostics are rapid, simple, and cost-effective devices and tests, that can be directly applied on field for the detection of animal pathogens. The development of POC diagnostics for use in human medicine has displayed remarkable progress. Nevertheless, animal POC testing has not yet unfolded its full potential. POC devices and tests for animal diseases face many challenges, such as insufficient validation, simplicity, and portability. Emerging technologies and advanced materials are expected to overcome some of these challenges and could popularize animal POC testing. This review aims to: (i) present the main concepts and formats of POC devices and tests, such as lateral flow assays and lab-on-chip devices; (ii) summarize the mode of operation and recent advances in biosensor and POC devices for the detection of farm animal diseases; (iii) present some of the regulatory aspects of POC commercialization in the EU, USA, and Japan; and (iv) summarize the challenges and future perspectives of animal POC testing.

State of the art: Lateral flow assays toward the point-of-care foodborne pathogenic bacteria detection in food samples

Diverse chemicals and some physical phenomena recently introduced in nanotechnology have enabled scientists to develop useful devices in the field of food sciences. Concerning such developments, detecting foodborne pathogenic bacteria is now an important issue. These kinds of bacteria species have demonstrated severe health effects after consuming foods and high mortality related to acute cases. The most leading path of intoxication and infection has been through food matrices. Hence, quick recognition of foodborne bacteria agents at low concentrations has been required in current diagnostics. Lateral flow assays (LFAs) are one of the urgent and prevalently applied quick recognition methods that have been settled for recognizing diverse types of analytes. Thus, the present review has stressed on latest developments in LFAs-based platforms to detect various foodborne pathogenic bacteria such as Salmonella, Listeria, Escherichia coli, Brucella, Shigella, Staphylococcus aureus, Clostridium botulinum, and Vibrio cholera. Proper prominence has been given on exactly how the labels, detection elements, or procedures have affected recent developments in the evaluation of diverse bacteria using LFAs. Additionally, the modifications in assays specificity and sensitivity consistent with applied food processing techniques have been discussed. Finally, a conclusion has been drawn for highlighting the main challenges confronted through this method and offered a view and insight of thoughts for its further development in the future.

A rapid and facile analytical approach to detecting Salmonella Enteritidis with aptamer-based surface-enhanced Raman spectroscopy

Salmonella should be absence in pharmaceutical preparations and foods according to regulations in many countries. Up to now, rapidly detecting Salmonella at 1 CFU·[10 g (mL) ]^-1 in pharmaceutical preparation or 1 CFU·[25 g (mL) ]^-1 in food samples is still a challenge. Herein, we present an aptamer-based surface-enhanced Raman spectroscopy (SERS) method for rapidly detecting Salmonella Enteritidis by using a handheld Raman instrument. The aptamer could specifically recognize S. Enteritidis, and 4-MBA self-assembled on the surface of Au@Ag NPs was used as a Raman reporter molecule. The method was validated to be high specific with no interference from other five pathogenic bacteria. It could identify S. Enteritidis contaminant at ∼ 1 CFU·(10 g)^-1 spiked level in a real sample (Wenxin granule, a botanical drug) after 6 h of enrichment. The detection time was much shorter than that of the methods (more than 54 ∼ 96 h) in the standards of pharmaceutical preparations and foods. In addition, the method could quantitatively determinate S. Enteritidis with satisfactory results. The SERS peak intensities of 4-MBA at 1072 cm^-1 showed a good linear correlation (R² = 0.9873) with the logarithms of S. Enteritidis concentrations ranging from 4.17 × 10² to 1.39 × 10⁷ CFU·mL^-1. T-test result (P = 0.425) revealed that there was no significant difference between the determination results obtained by the SERS method and the plate counting method. Therefore, the study indicated that the method was practical and reliable, and it could be a promising alternative for the on-site detection of S. Enteritidis.

New analytical methods using carbon-based nanomaterials for detection of Salmonella species as a major food poisoning organism in water and soil resources

Salmonella is one of the most prevalent causing agents of food- and water-borne illnesses, posing an ongoing public health threat. These food-poisoning bacteria contaminate the resources at different stages such as production, aggregation, processing, distribution, as well as marketing. According to the high incidence of salmonellosis, effective strategies for early-stage detection are required at the highest priority. Since traditional culture-dependent methods and polymerase chain reaction are labor-intensive and time-taking, identification of early and accurate detection of Salmonella in food and water samples can prevent significant health economic burden and lessen the costs. The immense potentiality of biosensors in diagnosis, such as simplicity in operation, the ability of multiplex analysis, high sensitivity, and specificity, have driven research in the evolution of nanotechnology, innovating newer biosensors. Carbon nanomaterials enhance the detection sensitivity of biosensors while obtaining low levels of detection limits due to their possibility to immobilize huge amounts of bioreceptor units at insignificant volume. Moreover, conjugation and functionalization of carbon nanomaterials with metallic nanoparticles or organic molecules enables surface functional groups. According to these remarkable properties, carbon nanomaterials are widely exploited in the development of novel biosensors. To be specific, carbon nanomaterials such as carbon nanotubes, graphene and fullerenes function as transducers in the analyte recognition process or surface immobilizers for biomolecules. Herein the potential application of carbon nanomaterials in the development of novel Salmonella biosensors platforms is reviewed comprehensively. In addition, the current problems and critical analyses of the future perspectives of Salmonella biosensors are discussed.

PCR combined with lateral flow immunochromatographic assay to differentiate the narcotic Mitragyna speciosa from related species and detect it in forensic evidence

Plants in the genus Mitragyna (Rubiaceae) are used in traditional medicine because of their broad therapeutic activity. Four Mitragyna species, M. speciosa (Roxb.) Korth. (MS), M. rotundifolia (Roxb.) Kuntze (MR), M. diversifolia (Wall. ex G. Don) Havil. (MD), and M. hirsuta Havil. (MH), occur in Thailand. M. speciosa, commonly known as 'Kratom' in Thai, is the only narcotic species for which buying, selling, importing or possessing has been prohibited by law in Thailand and some other countries. Mitragynine and 7-hydroxymitragynine, the major psychoactive compounds, are important in the treatment of opioid withdrawal. However, this species is used in traditional medicine to relieve pain and inflammation. Consequently, a rapid and easy technique for differentiating M. speciosa from closely related species is needed for routine forensic analysis. In this study, polymerase chain reaction coupled with lateral flow immunochromatographic assay (PCR-LFA) based on matK was developed for the detection of M. speciosa in forensic specimens. Duplex primers (MS-F-FAM, Ctrl-F-DIG and Ctrl-R-Biotin) were designed based on species-specific nucleotide indels observed exclusively in the matK sequences of M. speciosa. Positive results for M. speciosa are indicated by the clear presence of three black lines on the lateral flow cassette. Forensic samples were investigated, and the three black test lines indicating M. speciosa were observed for seven of eight specimens. PCR-LFA has been proven to be fast, easy and efficient for detecting the narcotic M. speciosa and could be developed as a rapid forensic diagnostic technique for other plants.

Recent advances and challenges of biosensing in point-of-care molecular diagnosis

Molecular diagnosis, which plays a major role in infectious disease screening with successful understanding of the human genome, has attracted more attention because of the outbreak of COVID-19 recently. Since point-of-care testing (POCT) can expand the application of molecular diagnosis with the benefit of rapid reply, low cost, and working in decentralized environments, many researchers and commercial institutions have dedicated tremendous effort and enthusiasm to POCT-based biosensing for molecular diagnosis. In this review, we firstly summarize the state-of-the-art techniques and the construction of biosensing systems for POC molecular diagnosis. Then, the application scenarios of POCT-based biosensing for molecular diagnosis were also reviewed. Finally, several challenges and perspectives of POC biosensing for molecular diagnosis are discussed. This review is expected to help researchers deepen comprehension and make progresses in POCT-based biosensing field for molecular diagnosis applications.

Direct Detection of Foodborne Pathogens via a Proximal DNA Probe-Based CRISPR-Cas12 Assay

Foodborne pathogens can cause illnesses. Existing tools for detecting foodborne pathogens are typically time-consuming or require complex protocols. Here, we report an assay to directly analyze pathogenic genes based on CRISPR-Cas12. This new test, termed proximal DNA probe-based CRISPR-Cas12 (PPCas12), facilitates the detection of foodborne pathogens without amplification steps. The elimination of the nucleic acid amplification process dramatically reduced the processing time, complexity, and costs in the analysis of foodborne pathogens. The substitution of the frequently used dually labeled DNA reporter with a proximal DNA probe in the PPCas12 assay led to a 4-fold sensitivity enhancement. PPCas12 offered a limit of detection of 619 colony-forming units in the detection of Salmonella enterica (S. enterica) without the nucleic acid amplification process. The specific recognition of genes via PPCas12 allowed distinguishing S. enterica from other foodborne pathogens. The PPCas12 assay was applied in the screening of S. enterica contamination on fresh eggs with high precision. Hence, the new PPCas12 assay will be a valuable tool for on-site monitoring of foodborne pathogens.

Ultra-specific nucleic acid testing by target-activated nucleases

Specific and sensitive detection of nucleic acids is essential to clinical diagnostics and biotechnological applications. Currently, amplification steps are necessary for most detection methods due to the low concentration of nucleic acid targets in real samples. Although amplification renders high sensitivity, poor specificity is prevalent because of the lack of highly accurate precise strategies, resulting in significant false positives and false negatives. Nucleases exhibit high catalytic activity for nucleic acid cleavage which is regulated in a programmable manner. This review focuses on the latest progress in nucleic acid testing methods based on the target-activated nucleases. It summarizes the property of enzymes such as CRISPR/Cas, Argonautes, and some gene-editing irrelevant nucleases, which have been leveraged to create highly specific and sensitive nucleic acid testing tools. We elaborate on recent advances in the field of nuclease-mediated DNA recognition techniques for nucleic acid detection, and discuss its future applications and challenges in molecular diagnostics.

Rapid point-of-need detection of bacteria and their toxins in food using gold nanoparticles

Biosensors need to meet the rising food industry demand for sensitive, selective, safe, and fast food safety quality control. Disposable colorimetric sensors based on gold nanoparticles (AuNPs) and localized surface plasmon resonance are low-cost and easy-to-perform devices intended for rapid point-of-need measurements. Recent studies demonstrate various facile and versatile AuNPs-based analytical platforms for the detection of bacteria and their toxins in milk, meat, and other foods. In this review, we introduce the general characteristics and mechanisms of AuNPs calorimetric biosensors, and highlight optimizations needed to strengthen and improve the quality of devices for their application in food matrices.

Aptamer-based lateral flow assay on-site biosensors

The lateral flow assay (LFA) is a widely used paper-based on-site biosensor that can detect target analytes and obtain test results in several minutes. Generally, antibodies are utilized as the biorecognition molecules in the LFA. However, antibodies selected using an in vivo process not only may risk killing the animal hosts and causing errors between different batches but also their range is restricted by the refrigerated conditions used to store them. To avoid these limitations, aptamers screened by an in vitro process have been studied as biorecognition molecules in LFAs. Based on the sandwich or competitive format, the aptamer-based LFA can accomplish on-site detection of target analytes. Since aptamers have a distinctive ability to undergo conformational changes, the adsorption-desorption format has also been exploited to detect target analytes in aptamer-based LFAs. This paper reviews developments in aptamer-based LFAs in the last three years for the detection of target analytes. Three formats of aptamer-based LFAs, i.e., sandwich, competitive, and adsorption-desorption, are described in detail. Based on these formats, signal amplification strategies and multiplexed detection are discussed in order to provide an overview of aptamer-based LFAs for on-site detection of target analytes. In addition, the potential commercialization and future perspectives of aptamer-based LFAs for rapid detection of SARS-CoV-2 are given to support the COVID-19 pandemic.

Detection and differentiation of respiratory syncytial virus subgroups A and B with colorimetric toehold switch sensors in a paper-based cell-free system

Respiratory syncytial virus (RSV) infection is the most common clinical infectious disease threatening the safety of human life. Herein, we provided a sensitive and specific method for detection and differentiation of RSV subgroups A (RSVA) and B (RSVB) with colorimetric toehold switch sensors in a paper-based cell-free system. In this method, we applied the toehold switch, an RNA-based riboswitch, to regulate the translation level of β-galactosidase (lacZ) gene. In the presence of target trigger RNA, the toehold switch sensor was activated and the expressed LacZ hydrolyzed chromogenic substrates to produce a colorimetric result that can be observed directly with the naked eye in a cell-free system. In addition, nucleic acid sequence-based amplification (NASBA) was used to improve the sensitivity by amplifying target trigger RNAs. Under optimal conditions, our method produced a visible result for the detection of RSVA and RSVB with the detection limit of 52 aM and 91 aM, respectively. The cross-reaction of this method was validated with other closely related respiratory viruses, including human coronavirus HKU1 (HCoV-HKU1), and Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). Furthermore, we used the paper-based carrier material that allows stable storage of our detection elements and rapid detection outside laboratory. In conclusion, this method can sensitively and specifically differentiate RSVA and RSVB and generate a visible colorimetric result without specialized operators and sophisticated equipment. Based on these advantages above, this method serves as a simple and portable detector in resource-poor areas and point-of-care testing (POCT) scenarios.

Recent advances in gold nanoparticle-based lateral flow immunoassay for the detection of bacterial infection

Diagnosis of bacterial infections (BI) is becoming an increasingly difficult task in clinical practice due to their high prevalence and frequency, as well as the growth of antibiotic resistance worldwide. World Health Organization (WHO) reported antibiotic resistance is a major public health problem. BI becomes difficult or impossible to treat when the bacteria acquire immunity against antibiotics. Thus, there is a need for a quick and accurate technique to detect infection. Lateral flow immunoassay (LFIA) is an ideal technique for point-of-care testing of a disease or pathological changes inside the human body. In recent years, several LFIA based strips are being used for the detection of BI by targeting specific analytes which may range from the causative bacterium, whole-cell, DNA, or biomarker. Numerous nanoparticles like lipid-based nanoparticles, polymeric nanoparticles, and inorganic nanoparticles such as quantum dots, magnetic, ceramic, and metallic nanoparticles (copper, silver gold, iron) are widely being used in the advanced treatment of BI. Out of these gold nanoparticle (AuNPs), is being used for detection BI more effectively than other nanoparticles due to their surface functionalization, extraordinary chemical stability, biorecognition, and signal amplification properties and help to improve in conjugation with capture antibodies, and act as a color marker with unique optical properties on LFIA strips. Herein, a review that provides an overview of the principle of LFIA, how LFIA based strip is developed, and how it is helpful to detect a specific biomarker for bedside detection of the BI.

Potential applications of aptamers in veterinary science

Aptamers are small nucleic acids that fold in a three-dimensional conformation allowing them to bind specifically to a target. This target can be an organic molecule, free or carried in cells or tissues, or inorganic components, such as metal ions. Analogous to monoclonal antibodies, aptamers however have certain advantages over the latter: e.g., high specificity for their target, no to low immunogenicity and easy in vitro selection. Since their discovery more than 30 years ago, aptamers have led to various applications, although mainly restricted to basic research. This work reviews the applications of aptamers in veterinary science to date. First, we present aptamers, how they are selected and their properties, then we give examples of applications in food and environmental safety, as well as in diagnosis and medical treatment in the field of veterinary medicine. Because examples of applications in veterinary medicine are scarce, we explore the potential avenues for future applications based on discoveries made in human medicine. Aptamers may offer new possibilities for veterinarians to diagnose certain diseases—particularly infectious diseases—more rapidly or “at the patient’s bedside”. All the examples highlight the growing interest in aptamers and the premises of a potential market. Aptamers may benefit animals as well as their owners, breeders and even public health in a “One Health” approach.

The mechanism and improvements to the isothermal amplification of nucleic acids, at a glance

A comparative review of the most common isothermal methods is provided. In the last two decades, the challenge of using isothermal amplification systems as an alternate to the most extensive and long-standing nucleic acids-amplifying method-the polymerase chain reaction-has arisen. The main advantage of isothermal amplification is no requirement for expensive laboratory equipment for thermal cycling. Considerable efforts have been made to improve the current techniques of nucleic acid amplification and the development of new approaches based on the main drawbacks of each method. The most important and challenging goal was to achieve a low-cost, straightforward system that is rapid, specific, accurate, and sensitive.

Recent Advances and a Roadmap to Aptamer-Based Sensors for Bloodstream Infections

The present review is intended to describe bloodstream infections (BSIs), the major pathogens responsible for BSIs, conventional tests and their limitations, commercially available methods used, and the aptamer and nanomaterials-based approaches developed so far for the detection of BSIs. The advantages associated with aptamers and the aptamer-based sensors, the comparison between the aptamers and the antibodies, and the various types of aptasensors developed so far for the detection of bloodstream infections have been described in detail in the present review. Also, the future outlook and roadmap toward aptamer-based sensors and the challenges associated with the aptamer development have also been concluded in this review.

A rapid and sensitive CRISPR/Cas12a based lateral flow biosensor for the detection of Epstein-Barr virus

Nasopharyngeal carcinoma (NPC) is one of the most common malignant tumors in the world, and several studies have associated Epstein-Barr virus (EBV) with NPC occurrence and development. EBV-PCR (polymerase chain reaction), in situ hybridization and immunoassays are the most common methods for NPC identification. However, these approaches have drawbacks, which include tedious procedures and false results. Therefore, a rapid, accurate, and sensitive clinical diagnostic method for the prognosis of EBV-related diseases is needed. In this study, we developed a simple and sensitive approach for EBV detection based on the combination of CRISPR-Cas12a and a lateral flow biosensor (LFB). Cas12a exhibits collateral cleavage propensity of both target DNA and any single-stranded(ss) DNA in the vicinity (herein referred to as a reporter). The LFB test line contained an ssDNA probe complementary to the reporter. In the presence of the target, Cas12a trans-cleaved the ssDNA reporter, which resulted in the inability of cleaved sequences to bind the LFB test line. With a PCR pre-amplification of the target (45 min), the assay achieved a sensitivity of 7.1 × 10-14 M (∼42 000 copies per μl) both in plasmid and plasmid-spiked samples. The assay attained a high specificity in the presence of various bacteria and applicability in EBV Burkitt's lymphoma serum samples. This method could be applied for the detection of EBV and other infectious diseases.

Ultrasensitive and Highly Specific Lateral Flow Assays for Point-of-Care Diagnosis

Lateral flow assays (LFAs) are paper-based point-of-care (POC) diagnostic tools that are widely used because of their low cost, ease of use, and rapid format. Unfortunately, traditional commercial LFAs have significantly poorer sensitivities (μM) and specificities than standard laboratory tests (enzyme-linked immunosorbent assay, ELISA: pM-fM; polymerase chain reaction, PCR: aM), thus limiting their impact in disease control. In this Perspective, we review the evolving efforts to increase the sensitivity and specificity of LFAs. Recent work to improve the sensitivity through assay improvement includes optimization of the assay kinetics and signal amplification by either reader systems or additional reagents. Together, these efforts have produced LFAs with ELISA-level sensitivities (pM-fM). In addition, sample preamplification can be applied to both nucleic acids (direct amplification) and other analytes (indirect amplification) prior to LFA testing, which can lead to PCR-level (aM) sensitivity. However, these amplification strategies also increase the detection time and assay complexity, which inhibits the large-scale POC use of LFAs. Perspectives to achieve future rapid (<30 min), ultrasensitive (PCR-level), and "sample-to-answer" POC diagnostics are also provided. In the case of LFA specificity, recent research efforts have focused on high-affinity molecules and assay optimization to reduce nonspecific binding. Furthermore, novel highly specific molecules, such as CRISPR/Cas systems, can be integrated into diagnosis with LFAs to produce not only ultrasensitive but also highly specific POC diagnostics. In summary, with continuing improvements, LFAs may soon offer performance at the POC that is competitive with laboratory techniques while retaining a rapid format.

Lateral flow assay of methicillin-resistant Staphylococcus aureus using bacteriophage cellular wall-binding domain as recognition agent

As one of the most common and noticeable superbugs, methicillin-resistant Staphylococcus aureus (MRSA) has long been a major threat to public health. To meet the demand for effective diagnosis of MRSA-induced infection, it is urgent to establish rapid assay method for this type of pathogen. In this study, an aqueous soluble cellular wall-binding domain (CWBD) protein from bacteriophage P108 was obtained with a recombinant expression technique. It can act as a wide-spectrum binding agent for all MRSA strains and exclude the interference from methicillin-susceptible strains of Staphylococcus aureus and other species of bacteria. To establish a lateral flow assay (LFA) method for MRSA, CWBD-coupled time-resolved fluorescent microspheres (FMs) were used as signal probes for tracing MRSA, and a nitrocellulose membrane immobilized with porcine IgG was used to capture MRSA. With the LFA based on sandwich format, MRSA can be assayed within 10 min with a broad linear range of 6.6 × 10²-6.6 × 10⁷ CFU/mL. Its application potential has been demonstrated by assaying different types of bacteria-contaminated real samples. The results suggest that the LFA strip using recombinant CWBD as the recognition agent provides a rapid, portable, cost-effective approach for point-of-care testing of MRSA.

Development of nucleic acid aptamer-based lateral flow assays: A robust platform for cost-effective point-of-care diagnosis

Lateral flow assay (LFA) has made a paradigm shift in the in vitro diagnosis field due to its rapid turnaround time, ease of operation and exceptional affordability. Currently used LFAs predominantly use antibodies. However, the high inter-batch variations, error margin and storage requirements of the conventional antibody-based LFAs significantly impede its applications. The recent progress in aptamer technology provides an opportunity to combine the potential of aptamer and LFA towards building a promising platform for highly efficient point-of-care device development. Over the past decades, different forms of aptamer-based LFAs have been introduced for broad applications ranging from disease diagnosis, agricultural industry to environmental sciences, especially for the detection of antibody-inaccessible small molecules such as toxins and heavy metals. But commercial aptamer-based LFAs are still not used widely compared with antibodies. In this work, by analysing the key issues of aptamer-based LFA design, including immobilization strategies, signalling methods, and target capturing approaches, we provide a comprehensive overview about aptamer-based LFA design strategies to facilitate researchers to develop optimised aptamer-based LFAs.

Development and evaluation of a gold nanoparticle based Lateral Flow assay (LFA) strip test for detection of Brucella spp

The widely used serodiagnostic test (RBPT, CFT, I-ELISA and FPA) for diagnosis of brucellosis cannot detect vertically infected or carrier animals that are seronegative, a persistent source of infection to other susceptible animals in the herd. For reducing transmission of disease within the herd, these animals must be detected using a rapid, sensitive, user friendly penside diagnostic test. In the present study, Lateral Flow immunoassay (LFA) strip test was developed for detection of Brucellaspp. from clinical samples (bovine aborted foetal stomach contents). The LFA strip was fabricated by printing anti-Brucella polyclonal antibodies (PAb) and anti-bovine antibodies IgG on test and control line, respectively. For conjugation, colloidal gold nanoparticles (30 nm GNP, Sigma, USA) were conjugated with anti-brucella PAb. The LFA strip test was able to detect 10⁷ cfu/ml B.abortus S99 inactivated organism in PBS and it did not exhibit any cross reactivity with selected non Brucella pathogens. To further validate, 115 clinical specimens were tested using LFA strip test. The relative sensitivity (DSn) and relative specificity (DSp) of LFA strip test was determined by ROC curve analysis using PCR and culture method as reference standard. DSn and DSp of LFA strip test was observed as 78.57% (95%CI: 49.2-95.3); 93.07% (95%CI: 86.2-97.2) and 80.0% (95%CI:51.9-95.7); 94.0% (95%CI:0.795-0.925) using culture and PCR as reference diagnostic tests, respectively. It may be concluded that, the LFA strip test can be used as a rapid penside diagnostic test for screening of brucellosis. To the best of our knowledge, this is the first report on development of GNP based LFA strip test for detection of Brucella spp. from bovine aborted fetal content samples.

Research advances and applications of biosensing technology for the diagnosis of pathogens in sustainable agriculture

Plant diseases significantly impact the global economy, and plant pathogenic microorganisms such as nematodes, viruses, bacteria, fungi, and viroids may be the etiology for most infectious diseases. In agriculture, the development of disease-free plants is an important strategy for the determination of the survival and productivity of plants in the field. This article reviews biosensor methods of disease detection that have been used effectively in other fields, and these methods could possibly transform the production methods of the agricultural industry. The precise identification of plant pathogens assists in the assessment of effective management steps for minimization of production loss. The new plant pathogen detection methods include evaluation of signs of disease, detection of cultured organisms, or direct examination of contaminated tissues through molecular and serological techniques. Laboratory-based approaches are costly and time-consuming and require specialized skills. The conclusions of this review also indicate that there is an urgent need for the establishment of a reliable, fast, accurate, responsive, and cost-effective testing method for the detection of field plants at early stages of growth. We also summarized new emerging biosensor technologies, including isothermal amplification, detection of nanomaterials, paper-based techniques, robotics, and lab-on-a-chip analytical devices. However, these constitute novelty in the research and development of approaches for the early diagnosis of pathogens in sustainable agriculture.

Evaluation and comparison of recombinase polymerase amplification coupled with lateral-flow bioassay for Escherichia coli O157:H7 detection using diifeerent genes

Shiga toxin-producing Escherichia coli serotype O157:H7 is a food and waterborne zoonotic pathogen causing gastroenteritis in humans. Rapid and simple detection in water and food is imperative to control its spread. However, traditional microbial detection approaches are time-consuming, expensive and complex to operate at the point-of-care without professional training. We present a rapid, simple, sensitive, specific and portable method for detection of E. coli O157:H7 in drinking water, apple juice and milk. We evaluated the effect of gene selection in detecting E. coli O157:H7 using recombinase polymerase amplification coupled with a lateral flow assay using rfbE, fliC and stx gene targets. As low as 100 ag and 1 fg DNA, 4-5 CFU/mL and 10¹ CFU/mL of E. coli O157:H7 was detected using the stx and rfbE gene targets respectively with 100% specificity, whilst the detection limit was 10 fg DNA and 10² CFU/mL for the fliC gene target, with 72.8% specificity. The RPA-LFA can be completed within 8 min at temperatures between 37 and 42 °C with reduced handling and simple equipment requirements. The test threshold amplification of the target was achieved in 5-30 min of incubation. In conclusion, RPA-LFA represents a potential rapid and effective alternative to conventional methods for the monitoring of E. coli O157:H7 in food and water.

Recent advances in sensitivity enhancement for lateral flow assay

Conventional lateral flow assay (LFA) is typically performed by observing the color changes in the test lines by naked eyes, which achieves considerable commercial success and has a significant impact on the fields of food safety, environment monitoring, disease diagnosis, and other applications. However, this qualitative detection method is not very suitable for low levels of disease biomarkers' detection. Although many nanomaterials are used as new labels for LFA, additional readers limit their application to some extent. Fortunately, a lot of work has been done for improving the sensitivity of LFA. In this review, currently reported LFA sensitivity enhancement methods with an objective evaluation are summarized, such as sample pretreatment, the change of flow rate, and label evolution, and future development direction and challenges of LFAs are discussed.

Recent Advances in Aptamer-Based Biosensors for Detection of Pseudomonas aeruginosa

Increasing concerns about nosocomial infection, food and environmental safety have prompted the development of rapid, accurate, specific and ultrasensitive methods for the early detection of critical pathogens. Pseudomonas aeruginosa is one of the most common pathogens that cause infection. It is ubiquitous in nature, being found in water, soil, and food, and poses a great threat to public health. The conventional detection technologies are either time consuming or readily produce false positive/negative results, which makes them unsuitable for early diagnosis and spot detection of P. aeruginosa. To circumvent these drawbacks, many efforts have been made to develop biosensors using aptamers as bio-recognition elements. Various aptamer-based biosensors for clinical diagnostics, food, and environmental monitoring of P. aeruginosa have been developed in recent years. In this review, we focus on the latest advances in aptamer-based biosensors for detection of P. aeruginosa. Representative biosensors are outlined according to their sensing mechanisms, which include optical, electrochemical and other signal transduction methods. Possible future trends in aptamer biosensors for pathogen detection are also outlined.

A lateral flow biosensor based on gold nanoparticles detects four hemorrhagic fever viruses

The pathogen of viral hemorrhagic fever (VHF), which is harmful to human health, is a hemorrhagic fever virus. Clinicians have long needed convenient and sensitive point-of-care rapid diagnostic tests (RDTs) for hemorrhagic fever viruses. Commonly used methods for pathogen detection rely on conventional culture-based tests, antibody-based assays and polymerase chain reaction (PCR)-based techniques. However, these methods are costly, laborious and time-consuming. Herein, we present a simple and sensitive biosensor for the rapid detection of hemorrhagic fever viruses. For this assay, we develop lateral flow biosensors (LFBs) based on magnetic beads and nicking enzyme-assisted isothermal strand-displacement amplification (SDA) for the detection of hemorrhagic fever viruses. The detection limit of this assay is 10 fM.

Advances in point-of-care nucleic acid extraction technologies for rapid diagnosis of human and plant diseases

Global health and food security constantly face the challenge of emerging human and plant diseases caused by bacteria, viruses, fungi, and other pathogens. Disease outbreaks such as SARS, MERS, Swine Flu, Ebola, and COVID-19 (on-going) have caused suffering, death, and economic losses worldwide. To prevent the spread of disease and protect human populations, rapid point-of-care (POC) molecular diagnosis of human and plant diseases play an increasingly crucial role. Nucleic acid-based molecular diagnosis reveals valuable information at the genomic level about the identity of the disease-causing pathogens and their pathogenesis, which help researchers, healthcare professionals, and patients to detect the presence of pathogens, track the spread of disease, and guide treatment more efficiently. A typical nucleic acid-based diagnostic test consists of three major steps: nucleic acid extraction, amplification, and amplicon detection. Among these steps, nucleic acid extraction is the first step of sample preparation, which remains one of the main challenges when converting laboratory molecular assays into POC tests. Sample preparation from human and plant specimens is a time-consuming and multi-step process, which requires well-equipped laboratories and skilled lab personnel. To perform rapid molecular diagnosis in resource-limited settings, simpler and instrument-free nucleic acid extraction techniques are required to improve the speed of field detection with minimal human intervention. This review summarizes the recent advances in POC nucleic acid extraction technologies. In particular, this review focuses on novel devices or methods that have demonstrated applicability and robustness for the isolation of high-quality nucleic acid from complex raw samples, such as human blood, saliva, sputum, nasal swabs, urine, and plant tissues. The integration of these rapid nucleic acid preparation methods with miniaturized assay and sensor technologies would pave the road for the "sample-in-result-out" diagnosis of human and plant diseases, especially in remote or resource-limited settings.

Advances in Portable Visual Detection of Pathogenic Bacteria

Food safety and regulation of consumer welfare are of great concern, so it is necessary to be able to detect pathogenic bacteria quickly and effectively. Although traditional methods of pathogen detection are reliable and widely used, the detection and analysis processes are cumbersome and time-consuming, which is not conducive to fast assays in the field. New detection strategies have emerged in recent years, especially point-of-care testing (POCT) methods, which do not rely on the laboratory and have become an important development direction for pathogen detection. Many visual detection schemes have been developed that integrate portable glucose meters (PGMs), test strips, smartphones, and other portable devices. Importantly, portable and ultrasensitive biosensors have vast promise in detecting pathogens, as they can be suitable tools for clinical diagnosis and the regulation of food safety. This Review focuses on the latest advances in portable device-based methods for visual detection of pathogens, evaluating their advantages and disadvantages.

Collocation of avian and mammal antibodies to develop a rapid and sensitive diagnostic tool for Russell's Vipers Snakebite

Russell's vipers (RVs) envenoming is an important public health issue in South-East Asia. Disseminated intravascular coagulopathy, systemic bleeding, hemolysis, and acute renal injury are obvious problems that develop in most cases, and neuromuscular junction blocks are an additional problem caused by western RV snakebite. The complex presentations usually are an obstacle to early diagnosis and antivenom administration. Here, we tried to produce highly specific antibodies in goose yolks for use in a paper-based microfluidic diagnostic kit, immunochromatographic test of viper (ICT-Viper), to distinguish RVs from other vipers and even cobra snakebite in Asia. We used indirect ELISA to monitor specific goose IgY production and western blotting to illustrate the interaction of avian or mammal antibody with venom proteins. The ICT-Viper was tested not only in prepared samples but also in stored patient serum to demonstrate its preliminary efficacy. The results revealed that specific anti-Daboia russelii IgY could be raised in goose eggs effectively without inducing adverse effects. When it was collocated with horse anti-Daboia siamensis antibody, which broadly reacted with most of the venom proteins of both types of Russell's viper, the false cross-reactivity was reduced, and the test showed good performance. The limit of detection was reduced to 10 ng/ml in vitro, and the test showed good detection ability in clinical snake envenoming case samples. The ICT-Viper performed well and could be combined with a cobra venom detection kit (ICT-Cobra) to create a multiple detection strip (ICT-VC), which broadens its applications while maintaining its detection ability for snake envenomation identification. Nonetheless, the use of the ICT-Viper in the South-East Asia region is pending additional laboratory and field investigations and regional collaboration. We believe that the development of this practical diagnostic tool marks the beginning of positive efforts to face the global snakebite issue.

Universal linker Polymerase Chain Reaction-triggered Strand Displacement Amplification visual biosensor for ultra-sensitive detection of Salmonella

Salmonella is a principal causal agent of pathogenic outbreaks via food. A universal, highly sensitive and visual Salmonella detection method was proposed in this paper, based on a universal linker PCR (UL-PCR)-triggered Strand Displacement Amplification (SDA). In this research, the UL-PCR achieved the primary amplification. The universal linker primer was ingeniously designed and composed of two parts, one of which was the binding sequence of the target, and the other was the universal linker. Complementary sequences of the G-quadruplex and the nicking endonuclease recognition sequence were included in the universal linker. Therefore, the G-quadruplexes and nicking sites were successfully introduced into the UL-PCR products, providing a basis for further SDA triggering. SDA achieved the secondary signal amplification and generated a large amount of label-free DNAzymes. Following SDA, DNAzymes catalyzed 3,3',5,5'-tetramethylaniline (TMB) into colored compounds visible to the naked eye. We obtained the best experimental conditions by univariate analysis. Under optimal conditions, this proposed universal label-free method could detect Salmonella genome at level as low as 22 copies mL^-1, with an excellent linear range between 10² copies mL^-1 and 10⁷ copies mL^-1. And the limit of quantification (LOQ) was 10² copies mL^-1. This strategy shows promise for broad applications.

Target-Catalyzed Assembly of Pyrene-Labeled Hairpins for Exponentially Amplified Biosensing

Rapid and sensitive detection of nucleic acids is vital for disease diagnosis. This work designed an enzyme-free isothermal strategy for rapid exponential signal amplification through target-triggered catalytic hairpin assembly (CHA) to induce the spatially sensitive fluorescent signal of the pyrene excimer. Functionally, this system consisted of three pyrene labelled hairpins (H1, H2, and H3) and one catalyst DNA C. In the presence of C, the CHA was activated to generate intermediate I, which contained a single-stranded region identical to the C sequence for initiating the second cycle of CHA to obtain 2I and thus achieved the exponential formation of I along with the switching of pyrene excimer. The fluorescent signal of the pyrene excimer could be further enhanced via the inclusion of γ-cyclodextrin and showed a linear increase upon increasing logarithm of C concentration. Through the introduction of a helping hairpin H4-containing C sequence and a region specific to the target, this strategy could be extended to realize the quick and sensitive detection of different analytes. Using dengue virus RNA as an analyte model, the proposed fluorescent method showed a linear range from 0.1 to 50 nM with a limit of detection of 0.048 nM at 3σ and good selectivity. The excellent performance and convenient operation demonstrated its promising application in clinical disease diagnosis.