An electrochemical aptasensor for thrombin using synergetic catalysis of enzyme and porous Au@Pd core-shell nanostructures for signal amplification

Recent trends in core/shell nanoparticles: their enzyme-based electrochemical biosensor applications

Improving novel and efficient biosensors for determining organic/inorganic compounds is a challenge in analytical chemistry for clinical diagnosis and research in biomedical sciences. Electrochemical enzyme-based biosensors are one of the commercially successful groups of biosensors that make them highly appealing because of their low cost, high selectivity, and sensitivity. Core/shell nanoparticles have emerged as versatile platforms for developing enzyme-based electrochemical biosensors due to their unique physicochemical properties and tunable surface characteristics. This study provides a comprehensive review of recent trends and advancements in the utilization of core/shell nanoparticles for the development of enzyme-based electrochemical biosensors. Moreover, a statistical evaluation of the studies carried out in this field between 2007 and 2023 is made according to the preferred electrochemical techniques. The recent applications of core/shell nanoparticles in enzyme-based electrochemical biosensors were summarized to quantify environmental pollutants, food contaminants, and clinical biomarkers. Additionally, the review highlights recent innovations and strategies to improve the performance of enzyme-based electrochemical biosensors using core/shell nanoparticles. These include the integration of nanomaterials with specific functions such as hydrophilic character, chemical and thermal stability, conductivity, biocompatibility, and catalytic activity, as well as the development of new hybrid nanostructures and multifunctional nanocomposites.

AgPdNFs and AuNOs@GO nanocomposites for T-2 toxin detection by catalytic hairpin assembly

T-2 toxin is the most potent and toxic mycotoxin, produced by various Fusarium species that can potentially affect human health, and widely exists in field crops and stored grain. In this work, an electrochemical aptasensor with nonenzymatic signal amplification strategy for the detection of T-2 toxin is presented, using noble metal nanocomposites and catalytic hairpin assembly as signal amplification strategy. Silver palladium nanoflowers and gold octahedron nanoparticles@graphene oxide nanocomposites are used for synergistic amplification of electrical signals. Simultaneously, the catalytic hairpin assembly strategy based on artificial molecular technology was introduced to further amplify the signal. Under optimal conditions, T-2 toxin was measured within a linear concentration range 1 × 10^-2 ~ 1 × 10⁴ pg·mL^-1 with an extremely low detection limit of 6.71 fg·mL^-1. The aptasensor exhibited high sensitivity, good selectivity, satisfactory stability, and excellent reproducibility. Moreover, this method had high accuracy in detecting T-2 toxin in beer sample. The encouraging results show the potential application in foodstuff analysis. A dual signal amplification electrochemical biosensor for the detection of T-2 toxins was constructed, through the signal amplification of noble metal nanomaterials and CHA strategy.

Porous Carbon Nanospheres and Gold Nanocomposite-Based Electrochemical Aptasensor for the Detection of Streptomycin

A novel electrochemical aptasensor modified with the nanocomposite of porous carbon nanospheres and Au urchins as the signal amplification and immobility platforms for aptamer was successfully constructed for ultrasensitive and selective determination of streptomycin. The streptomycin aptamer was fixed on the surface of the nanocomposite via the strong Au–S bond between Au urchins and aptamer. The target binding-induced conformational change of aptamer resulted in signal attenuation, which was expressed as “ΔI = IBSA − Istreptomycin.” Based on the synergic signal amplification platform, the as-prepared aptamer-based sensor showed a wider linearity to streptomycin from 0.01 to 350 ng/mL with a low detection limit of 5.0 pg/mL under the optimized condition. Finally, the aptasensor was operated in milk and honey to detect streptomycin. This study has provided a facile way to develop highly sensitive, effective and efficient aptamer-based electrochemical sensors for the detection of antibiotics at very low concentration.

A Core–Shell Au@TiO2 and Multi-Walled Carbon Nanotube-Based Sensor for the Electroanalytical Determination of H2O2 in Human Blood Serum and Saliva

A hydrogen peroxide (H₂O₂) sensor was developed based on core–shell gold@titanium dioxide nanoparticles and multi-walled carbon nanotubes modified glassy carbon electrode (Au@TiO₂/MWCNTs/GCE). Core–shell Au@TiO₂ material was prepared and characterized using a scanning electron microscopy and energy dispersive X-ray analysis (SEM/EDX), transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman spectroscopy, X-ray diffraction (XRD) and Zeta-potential analyzer. The proposed sensor (Au@TiO₂/MWCNTs/GCE) was investigated electrochemically using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The analytical performance of the sensor was evaluated towards H₂O₂ using differential pulse voltammetry (DPV). The proposed sensor exhibited excellent stability and sensitivity with a linear concentration range from 5 to 200 µM (R² = 0.9973) and 200 to 6000 µM (R² = 0.9994), and a limit of detection (LOD) of 1.4 µM achieved under physiological pH conditions. The practicality of the proposed sensor was further tested by measuring H₂O₂ in human serum and saliva samples. The observed response and recovery results demonstrate its potential for real-world H₂O₂ monitoring. Additionally, the proposed sensor and detection strategy can offer potential prospects in electrochemical sensors development, indicative oxidative stress monitoring, clinical diagnostics, general cancer biomarker measurements, paper bleaching, etc.

A novel electrochemical aptasensor based on layer-by-layer assembly of DNA-Au@Ag conjugates for rapid detection of aflatoxin M1 in milk samples

Aflatoxin M₁ (AFM₁) is a common toxin in dairy products that causes acute and chronic human health disorders. Thus, the development of a rapid and accurate AFM₁ detection method is of vital importance for food safety monitoring. This work was to develop a novel electrochemical aptasensor for sensitive and specific determination of AFM_1. The dendritic-like nanostructure was formed on the gold electrode surface by layer-by-layer assembly of gold-silver core-shell nanoparticles modified with DNA conjugates. In the presence of AFM₁, the specific recognition between AFM₁ and Apt caused the disassociation of the DNA controlled dual Au@Ag conjugates from the surface of the electrode, causing less methylene blue to bind to the surface and weakening the electrochemical signal. The more AFM₁ there is, the weaker the electrochemical signal. Transmission electron microscope results showed that the successfully synthesized Au@Ag nanoparticles exhibited a core-shell structure with Au as core and Ag as shell, and their average diameter was about 30 nm. Under optimal conditions, the electrochemical aptasensor showed a wide detection ranging from 0.05 ng mL^-1 to 200 ng mL^-1, and a low detection limit of 0.02 ng mL^-1. Moreover, the proposed strategy has been successfully applied to the detection of AFM₁ in cow, goat, and sheep milk samples with satisfactory recoveries ranging from 91.10% to 104.05%. This work can provide a novel rapid detection method for AFM₁, and also provide a new sensing platform for the detection of other toxins.

Conjugated bimetallic cobalt/iron polyphthalocyanine as an electrochemical aptasensing platform for impedimetric determination of enrofloxacin in diverse environments

The synthesis of bimetallic cobalt/iron polyphthalocyanine (represented by polyCoFePc) network via a modified solid-phase synthesis method is described. It was exploited as a platform for anchoring enrofloxacin (ENR)-targeted aptamer strands, thus, fabricating a label-free impedimetric aptasensor for determination of ENR. The polyCoFePc exhibited a porous two-dimensional (2D) conjugated nanostructure and rich functional groups, and showed a superior binding interaction toward aptamer strands as compared to monometallic polyFePc and polyCoPc networks. This finding was attributed to structural defects and increased active binding sites, thereby giving a highly sensitive detection ability toward ENR. By using electrochemical impedance spectroscopy (EIS), the polyCoFePc-based electrochemical aptasensor exhibited an extremely low detection limit of 0.06 fg mL^-1 within the ENR concentration from 0.1 fg mL^-1 to 100 pg mL^-1, along with high selectivity, good reproducibility, and remarkable stability. Interestingly, the constructed polyCoFePc-based aptasensor also demonstrated wide practicability in various environments. The recoveries of ENR spiked into river water, milk, and pork samples ranged within 91.2 - 107.2%, 90.5 - 109.6%, and 91.2 - 102.3%, respectively.

Electrochemical immunosensor with Cu2O nanocube coating for detection of SARS-CoV-2 spike protein

Severe acute respiratory syndrome SARS-CoV-2 has caused a global pandemic starting in 2020. Accordingly, testing is crucial for mitigating the economic and public health effects. In order to facilitate point-of-care diagnosis, this study aims at presenting a label-free electrochemical biosensor as a powerful nanobiodevice for SARS-CoV-2 spike protein detection. Utilizing the IgG anti-SARS-CoV-2 spike antibody onto the electrode surface as a specific platform in an ordered orientation through staphylococcal protein A (ProtA) is highly significant in fabricating the designed nanobiodevice. In this sense, the screen-printed carbon electrode modified with Cu₂O nanocubes (Cu₂O NCs), which provide a large surface area in a very small space, was applied in order to increase the ProtA loading on the electrode surface. Accordingly, the sensitivity and stability of the sensing platform significantly increased. The electrochemical evaluations proved that there is a very good linear relationship between the charge transfer resistance (R_ct) and spike protein contents via a specific binding reaction in the range 0.25 fg mL^-1 to 1 μg mL^-1. Moreover, the assay when tested with influenza viruses 1 and 2 was performed in 20 min with a low detection limit of 0.04 fg mL^-1 for spike protein without any cross-reactivity. The designed nanobiodevice exhibited an average satisfactory recovery rate of ~ 97-103% in different artificial sample matrices, i.e., saliva, artificial nasal, and universal transport medium (UTM), illustrating its high detection performance and practicability. The nanobiodevice was also tested using real patients and healthy samples, where the results had been already obtained using the standard polymerase chain reaction (PCR) procedure, and showed satisfactory results. Graphical abstract.

Ultra-sensitive and selective electrochemical biosensor with aptamer recognition surface based on polymer quantum dots and C60/MWCNTs- polyethylenimine nanocomposites for analysis of thrombin protein

In this study, an ultra-sensitive and selective Thrombin biosensor with aptamer-recognition surface is introduced based on carbon nanocomposite. To prepare the this biosensor, screen-printed carbon electrodes (SPCE) were modified with a nanocomposite made from fullerene (C₆₀), multi-walled carbon nanotubes (MWCNTs), polyethylenimine (PEI) and polymer quantum dots (PQdot). The unique characteristics of each component of the C₆₀/MWCNTs-PEI/PQdot nanocomposite allow for synergy between nanoparticles while polymer quantum dots resulted in characteristics such as high stability, high surface to volume ratio, high electrical conductivity, high biocompatibility, and high mechanical and chemical stability. The large number of amine groups in C₆₀/MWCNTs-PEI/PQdot nanocomposite created more sites for better covalent immobilization of amino-linked aptamer (APT) which improved the sensitivity and stability of the aptasensor. Differential Pulse Voltammetry (DPV) method with probe solution was used as the measurment method. Binding of thrombin protein to aptamers immobilized on the transducer resulted in reduced electron transfer at the electrode/electrolyte interface which reduces the peak current (I_P) in DPV. The calibration curve was drawn using the changes in the peak current (ΔI_P),. The proposed aptasensor has a very low detection limit of 6 fmol L^-1, and a large linear range of 50 fmol L^-1 to 20 nmol L^-1. Furthermore, the proposed C₆₀/MWCNTs-PEI/PQdot/APT aptasensor has good reproducibility, great selectivity, low response time and a good stability during its storage. Finally, the application of the proposed aptasensor for measuring thrombin on human blood serum samples was investigated. This aptasensor can be useful in bioengineering and biomedicine applications as well as for clinical studies.

Nanomaterials in electrochemical cytosensors

Nano-electrochemical cytosensors have attracted intensive attention and achieved huge progress in the biomedical field owing to their stability, rapidity, accuracy, and low-cost properties.

Electrochemical sandwich-type thrombin aptasensor based on dual signal amplification strategy of silver nanowires and hollow Au-CeO2

Signal amplification is crucial in electrochemical biosensor to obtain low detection limits. In this work, a highly sensitive sandwich-type thrombin aptasensor is constructed, based on dual signal amplification of uniform silver nanowires (AgNWs) and hollow Au-CeO₂ nanocomposites. AgNWs are decorated on the ITO surface to immobilize amino functionalized thrombin capture apemeter 1 (Apt1). And Au nanoparticles (AuNPs) grown directly on the surface of hollow CeO₂ microstructure are used to immobilize sulfydryl functionalized thrombin reporter apemeter 2 (Apt2). Thus, sandwich-type apatasensor has been successfully designed, due to the specific recognition between thrombin and the two kinds of aptamers. One of the signal amplifications is from the good conductivity of uniform AgNWs. Moreover, uniform AgNWs together with hollow Au-CeO₂ exhibit the good catalytic performance for the reduction of H₂O₂, further resulting in significant electrochemical signal amplification. Because the electrochemical signal amplification is closely related to the thrombin concentration, differential pulse voltammetry is used to specifically detect thrombin. Under the optimized conditions, the proposed method has a good linear response ranged from 0.5 pM to 30 nM with a low detection limit of 0.25 pM (S/N = 3) for thrombin. The proposed thrombin aptasensor displays good selectivity, reproducibility and stability, providing a good platform for the ultrasensitive detection of thrombin.

Covalent organic framework-based electrochemical aptasensors for the ultrasensitive detection of antibiotics

We designed and synthesized a novel covalent organic framework (COF) by condensation polymerization of 1,3,6,8-tetrakis(4-formylphenyl)pyrene and melamine through imine bonds (represented by Py-M-COF). The basic characterizations revealed that the Py-M-COF not only exhibited an extended π-conjugation framework, a large specific surface area (495.5 m² g^-1), big pore cavities, and nanosheet-like structure but also possessed rich functional groups, such as C˭C, C˭N, C˭O, and NH₂. These features endowed the Py-M-COF with high charge carrier mobility, further improving the strong immobilization of DNA aptamer strands via π-π stacking interaction and electrostatic interaction. As such, the Py-M-COF-based electrochemical aptasensors are ultrasensitive in detecting different antibiotics, including enrofloxacin (ENR) and ampicillin (AMP), yielding extremely low detection limits of 6.07 and 0.04 fg mL^-1 (S/N = 3) toward ENR and AMP, respectively, along with other excellent sensing performances. This biosensing platform based on Py-M-COF has potential applications for the sensitive detection of antibiotics or other analytes by replacing the corresponding aptamers.

A new electrochemical immunoassay for prion protein based on hybridization chain reaction with hemin/G-quadruplex DNAzyme

In this work, a new electrochemical immunosensor was developed for prion protein assay based on hybridization chain reaction (HCR) with hemin/G-quadruplex DNAzyme for signal amplification. In this amplification system, the hemin/G-quadruplex DNAzyme simultaneously mimicked the biocatalytic functions for H₂O₂ reduction and L-cysteine oxidation. In the presence of L-cysteine, the hemin/G-quadruplex catalyzed the oxidation of L-cysteine to L-cystine. At the same time, H₂O₂ was produced under the oxygen condition. Then, the hemin/G-quadruplex could quickly catalyze the reduction of H₂O₂, mimicking the catalytic performance of horseradish peroxidase (HRP). Under the optimal conditions, the immunosensor showed a wide linear response range from 0.5 pg/mL to 100 ng/mL with the low detection limit of 0.38 pg/mL (3σ). By changing the specific antibody, this strategy could be easily extended to detect the infectious isoform of prion (PrP^Sc) and other proteins. Based on its good analytical performance, the developed method shows great potential applications in diagnosis of prion diseases at presymptomatic stage and bioanalysis.

A new electrochemical immunosensor for sensitive detection of prion based on Prussian blue analogue

Based on Co-Co Prussian blue analogue (Co-Co PBA), a novel immunosensor has been developed for sensitive detection of prion protein (PrP^C). Gold nanoparticles (AuNPs)-modified Co-Co PBA nanocubes (PBA-AuNPs) worked as a support of the antibody (Ab2) of PrP^C to obtain Ab2-PBA-AuNPs composite and also as the signal source for PrP^C assay. When PrP^C existed, Ab2-PBA-AuNPs could be introduced to the surface of another antibody of PrP^C (Ab1) modified AuNPs/GC electrode (the gold nanoparticles-modified glassy carbon electrode) through specific antigen-antibody interaction between PrP^C and its antibodies to form the Ab1-PrP^C-Ab2 sandwich structure. With the help of KOH aqueous solution, PBA generated a large DPV response. The response peak currents were linear with the logarithmic values of the concentration of PrP^C in the range from 0.075pgmL^-1 to 100pgmL^-1 with the detection limit of 0.014pgmL^-1. Also, the immunosensor showed good selectivity and reproducibility. Based on the simple sensing structure and good analytical performance, the developed immunosensor may have promising applications in practical assay of infectious isoform of prion (PrP^Sc) and other proteins by simply changing the related antibody.

A Sensitive Electrochemical Aptasensor for Thrombin Detection Based on Electroactive Co-Based Metal-Organic Frameworks with Target-Triggering NESA Strategy

In this work, an improved target-triggering nicking enzyme signaling amplification (NESA) strategy as signal enhancer has been fabricated to obtain a sensitive electrochemical thrombin (TB) biosensor combined with PtPd NPs decorated electroactive Co-based metal-organic frameworks (Co-MOFs/PtPdNPs) as a redox mediator. Traditionally, in the NESA strategy, only one of the output double strands DNA is available in the next cycle. However, in this work, all of the output DNA involved in the improved NESA strategies could be further employed, resulting in high utilization of output DNA, which further enhanced signal amplification and sensitivity of the biosensor. In addition, the electroactive Co-MOFs were not only used as nanocarriers but also acted as signal labels, avoiding adding extra redox media. Simultaneously, in the presence of H₂O₂, PtPd NPs decorated on the Co-MOFs act the same as horseradish peroxidase to promote the oxidation of H₂O₂, further promoting the conversion of Co²⁺ to Co³⁺, leading to electrochemical signal amplification. With such design, the TB biosensor exhibited good sensitivity from 1 pM to 30 nM with a detection limit of 0.32 pM. This new NESA strategy with high utilization of output DNA can supply one efficient approach to improve signal amplification, which also open an avenue for sensitivity enhancement in detection of analytes.

Special Magnetic Catalyst with Lignin-Reduced Au-Pd Nanoalloy

This study describes a new strategy to fabricate a special magnetic catalyst via facile coating Au-Pd nanoalloy catalysts onto a commercial magnetic stirring bar, without the incorporation of iron element. First, the abundant natural "waste" lignin was utilized as the reducing and stabilizing agent to prepare Au-Pd nanoalloys in a green manner. The Au-Pd nanoalloys were assumed to have a core-shell structure with an Au-rich core and a Pd-rich shell. The Au-Pd nanoalloys could be well dispersed in aqueous medium due to the stabilizing effect of lignin and be conveniently coated onto the surface of a commercial stirring bar. The Au_1.0Pd_1.0 nanoalloy catalyst exhibited excellent catalytic activities in the reduction of 4-nitrophenol to 4-amnophenol by NaBH₄, with a rate constant (k) of 0.239 min^-1, which was higher than that of Au_0.5Pd_1.0 and Au_2.0Pd_1.0 nanoalloys and 4 times higher than that of a single-component Au or Pd nanoparticles. Besides, the catalytic ability of Au-Pd nanoalloy catalyst could be maintained even after seven cycles of catalysis. The catalytic rate constant was found to be positively correlated to the stirring speed of the bar. The scanning electron microscopy analysis revealed ravines and pores on the surface of lignin-nanoalloys composites, implying the possible mechanism of the catalytic activities. This study not only proved the feasibility of lignin for green synthesis of Au-Pd nanoalloys but also proposed a facile and innovated strategy for the future production of solid/liquid catalytic platforms where the developed method could be used to coat any surface interfacing the reagents.

Electrochemical aptasensor for thrombin using co-catalysis of hemin/G-quadruplex DNAzyme and octahedral Cu2O-Au nanocomposites for signal amplification

In this work, novel octahedral Cu₂O-Au nanocomposites were synthesized and first applied in an electrochemical aptasensor to detect thrombin (TB) with the aid of a DNAzyme for signal amplification. The octahedral Cu₂O-Au nanocomposites have not only simultaneously served as signal amplifying molecules but have also been utilized as an ideal loading platform to immobilize a large number of electroactive substances and recognition probes. Gold nanoparticles (AuNPs) were grown directly on the surface of the octahedral Cu₂O nanocrystals, and the Cu₂O-Au nanocomposites obtained had the advantages of large surface areas and excellent biocompatibilities. The hemin/G-quadruplex, which was formed by intercalating hemin into the amino terminated thrombin binding aptamer (NH₂-TBA), and the electroactive toluidine blue (Tb) were immobilized onto the Cu₂O-Au nanocomposite surfaces through a stable Au-N bond. AuNPs, Cu₂O and hemin/G-quadruplex co-catalyse the H₂O₂ in the working buffer to promote the electron transfer of Tb as a multiple signal amplification strategy in order to improve the performance of the electrochemical aptasensor. Under optimal conditions, the designed aptasensor exhibited sensitive detection of TB from 100 fM to 20nM with a lower detection limit of 23fM. This proposed aptasensor exhibited good sensitivity, high specificity and acceptable reproducibility and could be widely applied in bioassay analysis.

A sub-picomolar assay for protein by using cubic Cu2O nanocages loaded with Au nanoparticles as robust redox probes and efficient non-enzymatic electrocatalysts

In this work, a simple and sensitive electrochemical aptasensor for protein (thrombin – TB used as the model) was developed by using cubic Cu₂O nanocages (Cu₂O-NCs) loaded with Au nanoparticles (AuNPs@Cu₂O-NCs) as non-enzymatic electrocatalysts and robust redox probes.

Polyhydroquinone-graphene composite as new redox species for sensitive electrochemical detection of cytokeratins antigen 21-1

Polyhydroquinone-graphene composite as a new redox species was synthesized simply by a microwave-assisted one-pot method through oxidative polymerization of hydroquinone by graphene oxide, which exhibited excellent electrochemical redox activity at 0.124 V and can remarkably promote electron transfer. The as-prepared composite was used as immunosensing substrate in a label-free electrochemical immunosensor for the detection of cytokeratins antigen 21-1, a kind of biomarker of lung cancer. The proposed immunosensor showed wide liner range from 10 pg mL(-1) to 200 ng mL(-1) with a detection limit 2.3 pg mL(-1), and displayed a good stability and selectivity. In addition, this method has been used for the analysis of human serum sample, and the detection results showed good consistence with those of ELISA. The present substrate can be easily extended to other polymer-based nanocomposites.

A sensitive sandwich-type electrochemical aptasensor for thrombin detection based on platinum nanoparticles decorated carbon nanocages as signal labels

In this work, a novel and sensitive sandwich-type electrochemical aptasensor has been developed for thrombin detection based on platinum nanoparticles (Pt NPs) decorated carbon nanocages (CNCs) as signal tags. The morphological and compositional of the Pt NPs/CNCs were examined using transmission electron microscopy, X-ray diffraction, and Raman spectroscopy. The results showed that the Pt NPs with about 3-5nm in diameter were well dispersed on the surface of CNCs. The thiolated aptamer was firstly immobilized on the gold electrode to capture the thrombin molecules, and then aptamer functionalized Pt NPs/CNCs nanocomposites were used to fabricate a sandwich sensing platform. Then, the high-content Pt NPs on carbon nanocages acting as hydrogen peroxide-mimicking enzyme catalyzed the reduction of H2O2, resulting in significant electrochemical signal amplification. Differential pulse voltammetry is employed to detect thrombin with different concentrations. Under optimized conditions, the approach provided a good linear response range from 0.05 pM to 20nM with a low detection limit of 10fM. This Pt NPs/CNCs-based aptasensor shows good precision, acceptable stability and reproducibility, which provided a promising strategy for electrochemical aptamer-based detection of other biomolecules.

Label-free electrochemical immunosensor based on enhanced signal amplification between Au@Pd and CoFe2O4/graphene nanohybrid

The improvement of sensitivity of electrochemical immunosensor can be achieved via two approaches: increasing loading capacities of antibody and enlarging responding electrochemical signals. Based on these, CoFe2O4/graphene nanohybrid (CoFe2O4/rGO) as support was firstly used for preparing electrochemical biosensor, and with the addition of Au@Pd nanorods (NRs) as mimic enzyme, a label-free electrochemical immunosensor was prepared. Due to the high electrical conductivity, open porous structure and large loading capacities of CoFe2O4/rGO, the enhanced signal amplification between Au@Pd NRs and CoFe2O4/rGO was studied. Fabricated as a novel substrate, the prepared immunosensor had a good analytical performance and exhibited a wide linear range from 0.01 to 18.0 ng · mL(-1) with a low detection limit of 3.3 pg · mL(-1) for estradiol, which was succeeded in applying to detect estradiol in the natural water.

Aptamers in analytics

Nucleic acid aptamers are promising alternatives to antibodies in analytics. They are generally obtained through an iterative SELEX protocol that enriches a population of synthetic oligonucleotides to a subset that can recognize the chosen target molecule specifically and avidly. A wide range of targets is recognized by aptamers. Once identified and optimized for performance, aptamers can be reproducibly synthesized and offer other key features, like small size, low cost, sensitivity, specificity, rapid response, stability, and reusability. This makes them excellent options for sensory units in a variety of analytical platforms including those with electrochemical, optical, and mass sensitive transduction detection. Many novel sensing strategies have been developed by rational design to take advantage of the tendency of aptamers to undergo conformational changes upon target/analyte binding and employing the principles of base complementarity that can drive the nucleic acid structure. Despite their many advantages over antibodies, surprisingly few aptamers have yet been integrated into commercially available analytical devices. In this review, we discuss how to select and engineer aptamers for their identified application(s), some of the challenges faced in developing aptamers for analytics and many examples of their reported successful performance as sensors in a variety of analytical platforms.

Ultrasensitive electrochemical aptasensor for the detection of thrombin based on dual signal amplification strategy of Au@GS and DNA-CoPd NPs conjugates

In this work, an ultrasensitive electrochemical aptasensor for the detection of thrombin was developed based on Au nanoparticles decorated graphene sheet (Au@GS) and CoPd binary nanoparticles (CoPd NPs). A sulfydryl-labeled thrombin capture probe (Apt1) and a biotin-labeled thrombin reporter probe (Apt2) were designed to achieve a sandwich-type strategy. Au@GS was used as a sensing platform for the facile immobilization of Apt1 through Au-S bond, forming a sensing interface for thrombin. The specific recognition of thrombin induced the attachment of Apt2-CoPd NPs to the electrode. The labeled CoPd NPs showed good catalytic properties toward the reduction of H2O2, resulting in an amperometric signal. The amperometric response was correlated to the thrombin concentration in sample solutions. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) confirmed the successful fabrication of the aptasensor. A linear response to thrombin in the range of 0.01-2.00 ng mL(-1) with a low detection limit (5 pg mL(-1)) was achieved. The proposed aptasensor showed good selectivity, good reproducibility and acceptable stability. This proposed strategy may find many potential applications in the detection of other biomolecules.

Fabrication of magnetic bimetallic Fe3O4@Au–Pd hybrid nanoparticles with recyclable and efficient catalytic properties

View of the preparation process and evaluation of the catalytic activity of Fe₃O₄@Pd and Fe₃O₄@Au–Pd NPs.

Novel electrochemical redox-active species: one-step synthesis of polyaniline derivative-Au/Pd and its application for multiplexed immunoassay

Electrochemical redox-active species play crucial role in electrochemically multiplexed immunoassays. A one-pot method for synthesizing four kinds of new electrochemical redox-active species was reported using HAuCl4 and Na2PdCl4 as dual oxidating agents and aniline derivatives as monomers. The synthesized polyaniline derivative-Au/Pd composites, namely poly(N-methyl-o-benzenediamine)-Au/Pd, poly(N-phenyl-o-phenylenediamine)-Au/Pd, poly(N-phenyl-p-phenylenediamine)-Au/Pd and poly(3,3',5,5'-tetramethylbenzidine)-Au/Pd, exhibited electrochemical redox activity at -0.65 V, -0.3 V, 0.12 V, and 0.5 V, respectively. Meanwhile, these composites showed high H2O2 electrocatalytic activity because of the presence of Au/Pd. The as-prepared composites were used as electrochemical immunoprobes in simultaneous detection of four tumor biomarkers (carcinoembryonic antigen (CEA), carbohydrate antigen 19-9 (CA199), carbohydrate antigen 72-4 (CA724), and alpha fetoprotein (AFP)). This immunoassay shed light on potential applications in simultaneous gastric cancer (related biomarkers: CEA, CA199, CA724) and liver cancer diagnosis (related biomarkers: CEA, CA199, AFP). The present strategy to the synthesize redox species could be easily extended to other polymers such as polypyrrole derivatives and polythiophene derivatives. This would be of great significance in the electrochemical detection of more analytes.

Sensitive electrochemical aptamer cytosensor for highly specific detection of cancer cells based on the hybrid nanoelectrocatalysts and enzyme for signal amplification

Human cancer is becoming a leading cause of death in the world and the development of a straightforward strategy for early detection of cancer is urgently required. Herein, a sandwich-type electrochemical aptamer cytosensor was developed for detection of human liver hepatocellular carcinoma cells (HepG2) based on the hybrid nanoelectrocatalysts and enzyme for signal amplification. The thiolated TLS11a aptamers were used as a selective bio-recognition element, attached to the gold nanoparticles (AuNPs) modified the glassy carbon electrode (GCE) surface. Meanwhile, the electrochemical nanoprobes were fabricated through the G-quadruplex/hemin/aptamer complexes and horseradish peroxidase (HRP) immobilized on the surfaces of Au@Pd core-shell nanoparticle-modified magnetic Fe3O4/MnO2 beads (Fe3O4/MnO2/Au@Pd). After the target cells were captured, the hybrid nanoprobes were further assembled to form an aptamer-cell-nanoprobes sandwich-like system on the electrode surface. Then, hybrid Fe3O4/MnO2/Au@Pd nanoelectrocatalysts, G-quadruplex/hemin HRP-mimicking DNAzymes and the natural HRP enzyme efficiently catalyzed the oxidation of hydroquinone (HQ) with H2O2, amplifying the electrochemical signals and improving the detection sensitivity. This electrochemical cytosensor delivered a wide detection range of 1×10(2)-1×10(7)cellsmL(-1), high sensitivity with a low detection limit of 15cellsmL(-1), good selectivity and repeatability. Finally, an electrochemical reductive desorption method was performed to break gold-thiol bond and desorb the components on the AuNPs/GCE for regenerating the cytosensor. These results have demonstrated that the electrochemical cytosensor has the potential to be a feasible tool for cost-effective cancer cell detection in early cancer diagnosis.

Synthesis and electrocatalytic effect of Ag@Pt core-shell nanoparticles supported on reduced graphene oxide for sensitive and simple label-free electrochemical aptasensor

Bimetallic Ag@Pt core-shell nanoparticles supported on reduced graphene oxide nanosheets (Ag@Pt-GRs) was synthesized and used as novel desirable sensor platform and electrocatalyst for catechol as probe in aptasensor. Gold screen-printed electrodes modified with Ag@Pt-GRs and applied to advance enzyme-free and label-free electrochemical aptasensor for detection of protein biomarker tumor necrosis factor-alpha (TNF-α). The morphology of the Ag@Pt-GRs could be characterized by transmission electron microscopy, X-ray diffraction and UV-vis spectra. The results showed that these nanocomposite exhibited attractive electrocatalytic activity and also yielded large surface area, which improve the amount of immobilized TNF-α aptamer. Due to the excellent electrocatalytic activity of Ag@Pt-GRs towards the oxidation of catechol, determination of TNF-α antigen was based on its obstruction to the electrocatalytic oxidation of catechol by Ag@Pt-GRs after binding to the surface of electrode through interaction with the aptamer. The calibration curve was obtained by differential pulse voltammetry and square wave voltammetry. Under optimum conditions, the results demonstrated that this electrochemical aptasensor possessed a dynamic range from 0.0 pg/mL to 60 pg/mL with a low detection limit of 2.07 pg/mL for TNF-α. The analytical usefulness of the aptasensor was finally demonstrated analyzing serum samples. The simple fabrication method, high sensitivity, specificity, good reproducibility and stability as well as acceptable accuracy for TNF-α detection in human serum samples are the main advantages of this aptasensor, which might have broad applications in protein diagnostics and bioassay.

Synthesis and Adsorption Property of SiO₂@Co(OH)₂ Core-Shell Nanoparticles

Silica nanoparticles were directly coated with cobalt hydroxide by homogeneous precipitation of slowly decomposing urea in cobalt nitrate solution. The cobalt hydroxide was amorphous, and its morphology was nanoflower-like. The BET (Brunauer-Emmett-Teller) surface area of the core-shell composite was 221 m²/g. Moreover, the possible formation procedure is proposed: the electropositive cobalt ions were first adsorbed on the electronegative silica nanoparticles surface, which hydrolyzed to form cobalt hydroxide nanoparticles. Then, the cobalt hydroxide nanoparticles were aggregated to form nanoflakes. Finally, the nanoflakes self-assembled, forming cobalt hydroxide nanoflowers. Adsorption measurement showed that the core-shell composite exhibited excellent adsorption capability of Rhodamine B (RB).

Au@Pd core–shell nanoparticles-decorated reduced graphene oxide: a highly sensitive and selective platform for electrochemical detection of hydrazine

An Au_core–Pd_shell-decorated reduced graphene oxide nanocomposite is successfully employed for the electrochemical detection of low-level hydrazine in an aqueous solution.

A sensitive electrochemical aptasensor based on the co-catalysis of hemin/G-quadruplex, platinum nanoparticles and flower-like MnO2 nanosphere functionalized multi-walled carbon nanotubes

A sensitive thrombin electrochemical aptasensor is developed based on the co-catalysis of hemin/G-quadruplex, platinum nanoparticles and flower-like MnO₂ nanosphere functionalized multi-walled carbon nanotubes.