Enzyme-free and label-free ultra-sensitive colorimetric detection of Pb2+ using molecular beacon and DNAzyme based amplification strategy

Joint concanavalin A-aptamer enabled dual recognition for anti-interference visual detection of Salmonella typhimurium in complex food matrices

Given that food poisoning and infectious diseases caused by Salmonella typhimurium (S. typhimurium) draw intensive public health concerns, developing rapid, accurate, and cost-effective approaches to detect the pathogen is of crucial importance. Herein, we proposed a concanavalin A (Con A)-aptamer joint strategy to realize dual recognition for the strongly specific, visual, and highly sensitive determination of S. typhimurium. Compared with currently used single identification strategies, Con A and aptamer could recognize different sites of S. typhimurium to enhance the utilization rate of these sites for better sensing. The developed assay offered specific detection of S. typhimurium against other bacteria in a remarkably wide concentration range of 7.0 × 10¹ ∼ 7.0 × 10⁹ CFU/mL, along with a detection limit as low as 23 CFU/mL. Real sample analyses of milk and pork demonstrated the excellent reliability and practicability of our assay, providing great potential for food safety analysis.

An efficient electrochemical biosensor for the detection of heavy metal lead in food based on magnetic separation strategy and Y-DNA structure

Herein, an electrochemical biosensor was developed based on a magnetic separation strategy for the sensitive detection of the heavy metal Pb²⁺. The specific binding of Pb²⁺ and the aptamer (Apt) is used to trigger the release of the complementary chain (cDNA) on the magnetic bead system. The cDNA completes base complementary pairing with hairpins HP1 and HP2 at the electrode to form a Y-DNA structure. Then, the Y-DNA runs continuously with the assistance of the signal tag methylene blue (MB) and the current signal increases. However, in the absence of Pb²⁺, cDNA cannot be released and the Y-DNA structure cannot be formed on the electrode, resulting in a relatively low current signal. Under the optimal experimental conditions, the reduced peak current difference (ΔI) showed a good linear relationship with lg C_Pb²⁺ between 0.1 and 1000 nM, with a detection limit of 5.9 pM. In addition, the stability, reproducibility and detection capability of the sensors were investigated with satisfactory results.

Colorimetric Sensors for Chemical and Biological Sensing Applications

Colorimetric sensors have been widely used to detect numerous analytes due to their cost-effectiveness, high sensitivity and specificity, and clear visibility, even with the naked eye. In recent years, the emergence of advanced nanomaterials has greatly improved the development of colorimetric sensors. This review focuses on the recent (from the years 2015 to 2022) advances in the design, fabrication, and applications of colorimetric sensors. First, the classification and sensing mechanisms of colorimetric sensors are briefly described, and the design of colorimetric sensors based on several typical nanomaterials, including graphene and its derivatives, metal and metal oxide nanoparticles, DNA nanomaterials, quantum dots, and some other materials are discussed. Then the applications, especially for the detection of metallic and non-metallic ions, proteins, small molecules, gas, virus and bacteria, and DNA/RNA are summarized. Finally, the remaining challenges and future trends in the development of colorimetric sensors are also discussed.

Identification of heavy metal ions from aqueous environment through gold, Silver and Copper Nanoparticles: An excellent colorimetric approach

Heavy metal pollution has become a severe threat to human health and the environment for many years. Their extensive release can severely damage the environment and promote the generation of many harmful diseases of public health concerns. These toxic heavy metals can cause many health problems such as brain damage, kidney failure, immune system disorder, muscle weakness, paralysis of the limbs, cardio complaint, nervous system. For many years, researchers focus on developing specific reliable analytical methods for the determination of heavy metal ions and preventing their acute toxicity to a significant extent. The modern researchers intended to utilize efficient and discerning materials, e.g. nanomaterials, especially the metal nanoparticles to detect heavy metal ions from different real sources rapidly. The metal nanoparticles have been broadly utilized as a sensing material for the colorimetric detection of toxic metal ions. The metal nanoparticles such as Gold (Au), Silver (Ag), and Copper (Cu) exhibited localized plasmon surface resonance (LPSR) properties which adds an outstanding contribution to the colorimetric sensing field. Though, the stability of metal nanoparticles was major issue to be exploited colorimetric sensing of heavy emtal ions, but from last decade different capping and stabilizing agents such as amino acids, vitmains, acids and ploymers were used to functionalize the metal surface of metal nanoparticles. These capping agents prevent the agglomeration of nanoparticles and make them more active for prolong period of time. This review covers a comprehensive work carried out for colorimetric detection of heavy metals based on metal nanoparticles from the year 2014 to onwards.

Biosensing with DNAzymes

This article provides a comprehensive review of biosensing with DNAzymes, providing an overview of different sensing applications while highlighting major progress and seminal contributions to the field of portable biosensor devices and point-of-care diagnostics. Specifically, the field of functional nucleic acids is introduced, with a specific focus on DNAzymes. The incorporation of DNAzymes into bioassays is then described, followed by a detailed overview of recent advances in the development of in vivo sensing platforms and portable sensors incorporating DNAzymes for molecular recognition. Finally, a critical perspective on the field, and a summary of where DNAzyme-based devices may make the biggest impact are provided.

Detection of Vibrio vulnificus in Seafood With a DNAzyme-Based Biosensor

Vibrio vulnificus is an important pathogenic bacterium that is often associated with seafood-borne illnesses. Therefore, to detect this pathogen in aquatic products, a DNAzyme-based fluorescent sensor was developed for the in vitro detection of V. vulnificus. After screening and mutation, a DNAzyme that we denominated “RFD-VV-M2” exhibited the highest activity, specificity, and sensitivity. The limit of detection was 2.2 × 10³ CFU/ml, and results could be obtained within 5–10 min. Our findings suggested that the target of DNAzyme RFD-VV-M2 was a protein with a molecular weight between 50 and 100 kDa. The proposed biosensor exhibited an excellent capacity to detect marine products contaminated with V. vulnificus. Therefore, our study established a rapid, simple, sensitive, and highly specific detection method for V. vulnificus in aquatic products.

Parts per trillion detection of heavy metals in as-is tap water using carbon nanotube microelectrodes

Heavy metal contamination of drinking water is a major global issue. Research reports across the globe show contamination of heavy metals higher than the set standards of the World Health Organization (WHO) and US Environmental Protection Agency (EPA). To our knowledge, no electrochemical sensor for heavy metals with parts per trillion (PPT) limits of detection (LOD) in as-is tap water has been reported or developed. Here, we report a microelectrode that consists of six highly densified carbon nanotube fiber (HD-CNTf) cross sections called rods (diameter ∼69 μm and length ∼40 μm) in a single platform for the ultra-sensitive detection of heavy metals in tap water and simulated drinking water. The HD-CNTf rods microelectrode was evaluated for the individual and simultaneous determination of trace level of heavy metal ions i.e. Cu²⁺, Pb²⁺ and Cd²⁺ in Cincinnati tap water (without supporting electrolyte) and simulated drinking water using square wave stripping voltammetry (SWSV). The microsensor exhibited a broad linear detection range with an excellent limit of detection for individual Cu²⁺, Pb²⁺ and Cd²⁺ of 6.0 nM, (376 ppt), 0.45 nM (92 ppt) and 0.24 nM (27 ppt) in tap water and 0.32 nM (20 ppt), 0.26 nM (55 ppt) and 0.25 nM (28 ppt) in simulated drinking water, respectively. The microelectrode was shown to detect Pb²⁺ ions well below the WHO and EPA limits in a broad range of water quality conditions reported for temperature and conductivity in the range of 5 °C-45 °C and 55 to 600 μS/cm, respectively.

Chemical sensing with Au and Ag nanoparticles

Noble metal nanoparticles (NPs) are ideal scaffolds for the fabrication of sensing devices because of their high surface-to-volume ratio combined with their unique optical and electrical properties which are extremely sensitive to changes in the environment. Such characteristics guarantee high sensitivity in sensing processes. Metal NPs can be decorated with ad hoc molecular building blocks which can act as receptors of specific analytes. By pursuing this strategy, and by taking full advantage of the specificity of supramolecular recognition events, highly selective sensing devices can be fabricated. Besides, noble metal NPs can also be a pivotal element for the fabrication of chemical nose/tongue sensors to target complex mixtures of analytes. This review highlights the most enlightening strategies developed during the last decade, towards the fabrication of chemical sensors with either optical or electrical readout combining high sensitivity and selectivity, along with fast response and full reversibility, with special attention to approaches that enable efficient environmental and health monitoring.

Review of recent progress on DNA-based biosensors for Pb2+ detection

Lead (Pb) is a highly toxic heavy metal of great environmental and health concerns, and interestingly Pb²⁺ has played important roles in nucleic acids chemistry. Since 2000, using DNA for selective detection of Pb²⁺ has become a rapidly growing topic in the analytical community. Pb²⁺ can serve as the most active cofactor for RNA-cleaving DNAzymes including the GR5, 17E and 8-17 DNAzymes. Recently, Pb²⁺ was found to promote a porphyrin metalation DNAzyme named T30695. In addition, Pb²⁺ can tightly bind to various G-quadruplex sequences inducing their unique folding and binding to other molecules such as dyes and hemin. The peroxidase-like activity of G-quadruplex/hemin complexes was also used for Pb²⁺ sensing. In this article, these Pb²⁺ recognition mechanisms are reviewed from fundamental chemistry to the design of fluorescent, colorimetric, and electrochemical biosensors. In addition, various signal amplification mechanisms such as rolling circle amplification, hairpin hybridization chain reaction and nuclease-assisted methods are coupled to these sensing methods to drive up sensitivity. We mainly cover recent examples published since 2015. In the end, some practical aspects of these sensors and future research opportunities are discussed.

A label-free lead(II) ion sensor based on surface plasmon resonance and DNAzyme-gold nanoparticle conjugates

Detection of lead(II) (Pb²⁺) ions in water is important for the protection of human health and environment. The growing demand for onsite detection still faces challenges for sensitive and easy-to-use methods. In this work, a novel surface plasmon resonance (SPR) biosensor based on GR-5 DNAzyme and gold nanoparticles (AuNPs) was developed. Thiolated DNAzyme was immobilized on the gold surface of the sensor chip followed by anchoring the substrate-functionalized AuNPs through the DNAzyme-substrate hybridization. The coupling between the localized surface plasmon (LSP) of AuNPs and the surface plasmon polaritons (SPP) on the gold sensor surface was used to improve the sensitivity. The substrate cleavage in the presence of Pb²⁺ ions was catalyzed by DNAzyme, leading to the removal of AuNPs and the diminished LSP-SPP coupling. The optimal detection limit was 80 pM for the sensor fabricated with 1 μM DNAzyme, corresponding to two or three orders of magnitude lower than the toxicity levels of Pb²⁺ in drinking water defined by WHO and USEPA. By tuning the surface coverage of DNAzyme, the sensitivity and dynamic range could be controlled. This sensor also featured high selectivity to Pb²⁺ ions and simple detection procedure. Successful detection of Pb²⁺ ions in groundwater indicates that this method has the prospect in the onsite detection of Pb²⁺ ions in water. Given the variety of AuNPs and metal-specific DNAzymes, this detection strategy would lead to the development of more sensitive and versatile heavy metal sensors. Graphical abstract.

Application of DNA nanodevices for biosensing

Deoxyribonucleic acid (DNA), the carrier of genetic information in living life, is an essential biomacromolecule in almost all living systems. DNA has advantages including, programmability, predictability, high rigidity, and stability. Through self-assembly or combination with other nanomaterials (such as gold nanoparticles, graphene oxides, quantum dots, and polymers), DNA can be applied to construct specific, stable, biocompatible, and functional nanodevices. DNA nanodevices have made greater contributions in a plethora of fields. In this review, we discuss the recent progress of DNA nanodevices in molecular detection and analysis. Meanwhile, we prospect the development of various DNA devices in biological analysis, clinical diagnosis and biomedical research.

Colorimetric determination of Pb2+ ions based on surface leaching of Au@Pt nanoparticles as peroxidase mimic

We report the first use of metallic nanozyme as colorimetric probe for Pb²⁺ determination. The method is based on the surface leaching of Au@PtNP nanozyme by Pb²⁺-S₂O₃^2- ions, accompanied by a decreased catalytic activity of the metallic nanozyme. To construct this colorimetric determination, the Pt deposition onto the AuNPs was carefully investigated and other experimental factors including kind of substrate and buffer were optimized. With increasing Pb²⁺ concentration, the catalytic activity of the Au@PtNPs decreased gradually. As a result, the blue color at 650 nm from the oxidation of 3,3',5,5'-tetramethylbenzidine by H₂O₂ faded gradually. A determination limit of 3.0 nM Pb²⁺ with a linear range from 20 to 800 nM was obtained. The assay demonstrated negligible response to common metal ions even at elevated concentrations. This colorimetric method was applied to the determination of Pb²⁺ ions spiked in lake water samples, and good recoveries (96.8-105.2%) were obtained. The above results indicate the potential application of metallic nanozymes in developing robust colorimetric assays. Graphical abstract Schematic representation of the surface leaching of Au@PtNP nanozyme by Pb²⁺-S₂O₃^2- ions, accompanying the decreased catalytic activity of the metallic nanozyme.

DNA-only, microwell-based bioassay for multiplex nucleic acid detection with single base-pair resolution using MNAzymes

In disease diagnostics, single- and multiplex nucleic acid (NA) detection, with the potential to discriminate mutated strands, is of paramount importance. Current techniques that rely on target amplification or protein-enzyme based signal amplification are highly relevant, yet still plagued by diverse drawbacks including erroneous target amplification, and the limited stability of protein enzymes. As a solution, we present a multicomponent nucleic acid enzymes (MNAzymes)-based system for singleplex and multiplex detection of NA targets in microwells down to femtomolar (fM) concentrations, without the need for any target amplification or protein enzymes, while operating at room temperature and with single base-pair resolution. After successful validation of the MNAzymes in solution, their performance was further verified on beads in bulk and in femtoliter-sized microwells. The latter is not only a highly simplified system compared to previous microwell-based bioassays but, with the detection limit of 180 fM, it is to-date the most sensitive NAzyme-mediated, bead-based approach, that does not rely on target amplification or any additional signal amplification strategies. Furthermore, we demonstrated, for the first time, multiplexed target detection in microwells, both from buffer and nasopharyngeal swab samples, and presented superior single base-pair resolution of this assay. Because of the design flexibility of MNAzymes and direct demonstration in swab samples, this system holds great promise for multiplexed detection in other clinically relevant matrices without the need for any additional NA or protein components. Moreover, these findings open up the potential for the development of next-generation, protein-free diagnostic tools, including digital assays with single-molecule resolution.

Highly sensitive and selective optical sensor for lead ion detection based on liquid crystal decorated with DNAzyme

Lead ions (Pb²⁺) are one of the major environmental pollutants that are dangerous for human health, thus the detection methods of Pb²⁺ become very important as well. However, most reported techniques suffer from drawbacks such as long time, expensive equipment and complicated testing process, which prevent the use of real-time application. Herein, we demonstrate a novel liquid crystal optical sensor for detection of Pb²⁺ based on DNAzyme and its combined strand. The ordered and disordered configuration of liquid crystals, induced by complementary DNA strand and catalytically cleaved DNA in presence of lead ion separately, leads to dark and bright optical image under POM. The proposed naked-eye optical sensor possesses an extremely broad detection range of Pb²⁺ from 50 nM to 500 µM, with a low detection limit about 36.8 nM. The sensor also demonstrates high selectivity of Pb²⁺ from many other metal ions. The proposal LC sensor is highly sensitive and selective for Pb²⁺ detection, which provides a novel platform for other heavy metal, DNAs or antigen in biological and chemical fields by modifying sensing molecules.

Fluorescence covalent interaction enhanced sensor for lead ion based on novel graphitic carbon nitride nanocones

Novel graphitic carbon nitride nanocones (g-CNNCs) were synthesized for the first time in this study. The SEM, TEM, XPS and FT-IR were used to research the structure of the g-CNNCs. We found that the g-CNNCs showed high selective and sensitive for fluorescence enhancement detection of Pb²⁺ ion via covalent interaction. In addition, the g-CNNCs exhibit stable and specific concentration-dependent fluorescence intensity in the presence of Pb²⁺ ion in the range of 1-200 μmol·dm^-3, and the limit of detection was estimated to be 0.0438 μmol·dm^-3 (3S/k). More importantly, the g-CNNCs were used to detect practical samples with satisfactory results.

Label-free potentiometric aptasensing platform for the detection of Pb2+ based on guanine quadruplex structure

Potentiometric aptasensors enhanced by integrating advanced nanomaterials are of particular interest for the detection of multiplex species (e.g., proteins, bacteria, micro-organisms) due to their low cost, ease of operation, and low detection limits. However, potentiometric detection of small ionic species aptasensors is still challenging. This article describes the first example of a label-free G-quadruplex-based potentiometric aptasensing platform for the detection of Pb²⁺. Polyion oligonucleotide-labeled gold nanoparticles (AuNPs-DNA) as probes are modified on Au electrode, providing high-density negative charge on the electrode surface. These signal-amplifying probes can selectively form G-quadruplexes with the presence of Pb²⁺ ions and reduce the negative charges on the electrode surface, hence achieving potentiometric detection of Pb²⁺ ions with high selectivity. The AuNPs-DNA-based aptasensor shows an acceptable sensitivity over a wide range from 10^-11 to 10^-6 M with a detection limit of 8.5 pM. Furthermore, confirmed by coupled plasma mass spectrometry, the sensing platform is capable of performing effective and accurate detection of Pb²⁺ level in real water samples. The presented aptasensor offers a fast, convenient, low-maintenance, and highly sensitive alternative for on-site water pollution detections.

Electrochemical Detection of Ultratrace Lead Ion through Attaching and Detaching DNA Aptamer from Electrochemically Reduced Graphene Oxide Electrode

This paper describes a simple strategy for the ultratrace level detection of Pb²⁺ ion based on G-quadruplex DNA and an electrochemically reduced graphene oxide (ERGO) electrode. First, ERGO was formed on a glassy carbon electrode (GCE) by the reduction of graphene oxide (GO) using cyclic voltammetry. Subsequently, a methylene blue (MB)-tagged, guanine-rich DNA aptamer (Apt) was attached to the surface of ERGO via π-π interaction, leading to the Apt-modified ERGO electrode. The presence of Pb²⁺ could generate the folding of Apt to a G-quadruplex structure. The formation of G-quadruplex resulted in detaching the Apt from the ERGO/GCE, leading to a change in redox current of the MB tag. Electrochemical measurements showed the proposed sensor had an exceptional sensitivity for Pb²⁺ with a linear range from 10^-15 to 10^-9 M and a detection limit of 0.51 fM. The sensor also exhibited high selectivity for Pb²⁺, as well as many other advantages, such as stability, reproducibility, regeneration, as well as simple fabrication and operation processes.

Coordination-induced structural changes of DNA-based optical and electrochemical sensors for metal ions detection

Metal ions play a critical role in human health and abnormal levels are closely related to various diseases. Therefore, the detection of metal ions with high selectivity, sensitivity and accuracy is particularly important. This article highlights and comments on the coordination-induced structural changes of DNA-based optical, electrochemical and optical-electrochemical-combined sensors for metal ions detection. Challenges and potential solutions of DNA-based sensors for the simultaneous detection of multiple metal ions are also discussed for further development and exploitation.

A simple paper-based aptasensor for ultrasensitive detection of lead (II) ion

In this study, a simple paper-based aptasensor has been developed for the ultrasensitive detection of lead (Pb²⁺) ion within about 10 min. The aptasensor has been successfully designed by taking advantages of the Förster Resonance Energy Transfer (FRET) process and the super fluorescence quenching property of graphene oxide (GO) sheet. The sensing mechanism of the aptasensor is based on the conformational switch of the Pb²⁺-specific aptamer from a random coil to a G-quadruplex structure. An injection of Pb²⁺ on the paper-based platform induces the release of the specific aptamer from the GO surface that recovers the fluorescence emission. Under the optimal experimental conditions, there is a good linear relationship between the fluorescence recovery and the Pb²⁺concentration in the ranges of 5-70 pM and 0.07-20 nM. Moreover, the aptasensing array exhibits a high sensitivity to Pb²⁺ with an ultra-low detection limit of 0.5 pM. The developed aptasensor has been successfully applied to determine Pb²⁺ in tap water, lake water, milk, and human blood serum. The paper-based aptasensor can be efficiently utilized to detect other metal ions and biological molecules by substituting target specific aptamer.

A visual and sensitive Hg2+ detection strategy based on split DNAzyme amplification and peroxidase-like activity of hemin-graphene composites

A visual and sensitive Hg²⁺ detection strategy was developed based on split DNAzyme amplification and hemin-graphene oxide composites (H-GNs). Two split DNAzyme sequences can form two entire enzyme-strands DNA (E-DNA) by T-Hg²⁺-T interaction. The E-DNA can bind with the loop of molecular beacon (MB) to form Mg²⁺-dependent DNAzyme structure. The formed DNAzyme can circularly cleave the loop of MB, resulting large amount of DNA fragments. The resultant DNA fragments can prevent H-GNs from aggregation by adsorbing on its surface. Consequently, the supernate with large amount of H-GNs shows dark blue color after chromogenic reaction. This strategy shows a linear range from 50 pM to 1200 pM. The limit detection can be low to 33 pM. This strategy provides a visual and enzyme-free amplification mode for quick and sensitive screen of Hg²⁺.

Biomimetic Sensing System for Tracing Pb2+ Distribution in Living Cells Based on the Metal-Peptide Supramolecular Assembly

Metal-peptide interactions provide plentiful resource and design principles for developing functional biomaterials and smart sensors. Pb²⁺, as a borderline metal ion, has versatile coordination modes. The interference from competing metal ions and endogenous chelating species greatly challenges Pb²⁺ analysis, especially in complicated living biosystems. Herein, a biomimetic peptide-based fluorescent sensor GSSH-2TPE was developed, starting from the structure of a naturally occurring peptide glutathione. Lewis acid-base theory was employed to guide the molecular design and tune the affinity and selectivity of the targeting performance. The integration of peptide recognition and aggregation-induced emission effect provides desirable sensing features, including specific turn-on response to Pb²⁺ over 18 different metal ions, rapid binding, and signal output, as well as high sensitivity with a detection limit of 1.5 nM. Mechanism investigation demonstrated the balance between the chelating groups, and the molecular configuration of the sensor contributes to the high selectivity toward Pb²⁺ complexation. The ion-induced supramolecular assembly lights up the bright fluorescence. The ability to image Pb²⁺ in living cells was exhibited with minimal interference from endogenous biothiols, no background fluorescence, and good biocompatibility. With good cell permeability, GSSH-2TPE can monitor changes in Pb²⁺ levels and biodistribution and thus predict possible damage pathways. Such metal-peptide interaction-based sensing systems offer tailorable platforms for designing bioanalytical tools and show great potential for studying the cell biology of metal ions in living biosystems.

Proximity ligation assay induced and DNAzyme powered DNA motor for fluorescent detection of thrombin

A novel DNA motor for thrombin detection was described here based on proximity ligation assay (PLA) induced DNAzyme recycling cleavage. Fluorophore labeled DNA is modified on gold nanoparticles (AuNPs) and the fluorescent signal is quenched by AuNPs. The PLA between target thrombin and two aptamers induces the forming of Mg²⁺-dependent DNAzyme. The fluorophore labeled DNA is cleaved circularly by the DNAzyme, releasing the fluorescent fragment from AuNPs surface. The cleavage and rebinding process create a processive walking along AuNPs surface track. As a result, the fluorescent intensity recovers significantly. A good linear relationship is obtained between the ratio of fluorescence intensity and thrombin concentration in the range from 10 pM to 10 nM. The limit of detection is calculated to be 4 pM. These results are comparable or even better than other amplification based methods.

Simultaneous detection and determination of mercury (II) and lead (II) ions through the achievement of novel functional nucleic acid-based biosensors

The serious threats of mercury (Hg²⁺) and lead (Pb²⁺) ions for the public health makes it important to achieve the detection methods of the ions with high affinity and specificity. Metal ions usually coexist in some environment and foodstuff or clinical samples. Therefore, it is very necessary to develop a fast and simple method for simultaneous monitoring the amount of metal ions, especially when Hg²⁺ and Pb²⁺ coexist. DNAzyme-based biosensors and aptasensors have been highly regarded for this purpose as two main groups of the functional nucleic acid (FNA)-based biosensors. In this review, we summarize the recent achievements of functional nucleic acid-based biosensors for the simultaneous detection of Hg²⁺ and Pb²⁺ ions in two main optical and electrochemical groups. The tremendous interest in utilizing the various nanomaterials is also highlighted in the fabrication of the FNA-based biosensors. Finally, some results are presented based on the advantages and disadvantages of the studied FNA-based biosensors to compare their validation.

A novel 4-phenyl amino thiourea derivative designed for real-time ratiometric-colorimetric detection of toxic Pb2

The objective of this study was to develop a ratiometric and colorimetric organic sensor for Pb²⁺ detection in environmental samples. A new probe 4-phenyl amino thiourea (PAT) was designed and synthesized using hydrazine hydrate and phenyl isothiocyanate as raw materials. After its structure was characterized and confirmed, its UV-vis spectral property was investigated in detail. PAT possesses a specifically real-time, ratiometric and colorimetric response to Pb²⁺ in dimethyl formamide (DMF)/H₂O (v/v = 9:1, pH = 7.0) within 18.0 s. There was little interference in the presence of some other common metal ions, such as Fe³⁺, Cd²⁺, Zn²⁺, Mg²⁺, Cr³⁺, Ca²⁺, Ba²⁺, Sn²⁺, Na⁺, Mn²⁺, Hg²⁺, and Pb²⁺. Under the optimized conditions (DMF/H₂O with v/v of 9:1, c_PAT = 1.0 × 10^-3 mol·L^-1, pH = 7.0), the present sensor PAT was successfully applied for Pb²⁺ determination in environmental water samples with satisfied recoveries (83.0%-106.0%) and analytical precision (≤7.2%). The recognition mechanism was confirmed to form a stable 1:1 six-member ring complex between the target dye and Pb²⁺ with a coordination constant of 4.96 × 10⁴.

Novel and label-free colorimetric detection of radon using AuNPs and lead(II)-induced GR5 DNAzyme-based amplification strategy

Radioactive radon decays into a stable daughter product, ²¹⁰Pb, which was used as the detection target to determine the radon radiation dose in a new technique. Pb²⁺ triggers DNAzyme to cleave a molecular beacon (MB), resulting in the stem-loop structure opening and forming two single DNA strands (ssDNA). The ssDNA binds to unmodified gold nanoparticles and effectively prevents their aggregation in a salt solution. The detached enzyme strands continue to complement the remaining MB to amplify the response signal. The method proposed in this study exhibited a good linear relationship for Pb²⁺ and radon concentrations in the range of 6.22 × 10²-1.02 × 10⁵ Bq h/m³ with a detection limit of 186.48 Bq h/m³ using an ultraviolet-visible spectrometer. In practical applications, this sensitive method can avoid radioactive damage in field testing, and the detection limit meets the national standard in China. Importantly, this simple, highly sensitive strategy uses simple equipment and has a strong anti-interference ability. Graphical abstract.

Dual enzyme-free amplification strategy for ultra-sensitive fluorescent detection of bisphenol A in water

An ultra-sensitive strategy for bisphenol A (BPA) detection based on dual enzyme-free strategies: hybridization chain reaction (HCR) and enzyme-strand recycling reaction has been developed. The BPA aptamer can form hairpins structure by the partly self-complementary sequence. In the presence of BPA, the released BPA aptamer sequence can trigger the HCR between two hairpins to from a long nicked double-helix DNA. The tails of hairpins on the duplex DNA were closely enough to hybridize with molecular beacon (MB) on the gold nanoparticles (AuNPs) to circularly cleave the loop of MB, leading to a "turn-on" fluorescent signal. This method exhibited high sensitivity for BPA detection in a linear rang from 0.2 to 1000 pM with 0.05 pM of limit of detection. Moreover, it was successfully used for BPA detection in real water samples. Importantly, this method was simple without complex enzymatic procedure and high cost, showing a promising future for on-site detection of BPA in practical application.

QCM-nanomagnetic beads biosensor for lead ion detection

A QCM biosensor combined with NMBs has been proposed for Pb²⁺detection with a lower detection limit of 0.3 pM.

A simple lateral flow biosensor for rapid detection of lead(ii) ions based on G-quadruplex structure-switching

A novel strip biosensor equipped with a colorimetric card shows great promise for in-field Pb²⁺ detection.

Rapid Enrichment and Sensitive Detection of Multiple Metal Ions Enabled by Macroporous Graphene Foam

Nanomaterials have shown great promise in advancing biomedical and environmental analysis because of the unique properties originated from their ultrafine dimensions. In general, nanomaterials are separately applied to either enhance detection by producing strong signals upon target recognition or to specifically extract analytes taking advantage of their high specific surface area. Herein, we report a dual-functional nanomaterial-based platform that can simultaneously enrich and enable sensitive detection of multiple metal ions. The macroporous graphene foam (GF) we prepared displays abundant phosphate groups on the surface and can extract divalent metal ions via metal-phosphate coordination. The enriched metal ions then activate the metal-responsive DNAzymes and produce the fluorescently labeled single-stranded DNAs that are adsorbed and quenched by the GF. The resultant fluorescence reduction can be used for metal quantitation. The present work demonstrated duplexed detection of Pb2+ and Cu2+ using the Pb- and Cu-responsive DNAzymes, achieving a low detection limit of 50 pM and 0.6 nM, respectively. Successful quantification of Pb2+ and Cu2+ in human serum and river water were achieved with high metal recovery. Since the phosphate-decorated GF can enrich diverse types of divalent metal cations, this dual-functional GF-DNAzyme platform can serve as a simple and cost-effective tool for rapid and accurate metal quantification in determination of human metal exposure and inspection of environmental contamination.