Sandwich-format ECL immunosensor based on Au star@BSA-Luminol nanocomposites for determination of human chorionic gonadotropin

A smartphone-based immunochromatographic strip platform for on-site quantitative detection of antigenic targets

To report the testing signal of an immunochromatographic assay for on-site quantitative detection, a portable and user-friendly smartphone-based biosensing platform is developed in this study. This innovative system is composed of an ambient light sensor inherent smartphone reader and a 3D-printed handhold device, a quantitative tool capable of directly interpreting carbon nanoparticle (CNP)-conjugated immunochromatographic strips. To showcase the platform capability, the smartphone-based immunochromatography system (SPICS) reader and device were successfully used in CNP strips for rapid detection of the early pregnancy marker human chorionic gonadotropin in female urine (HCG; limit of detection [LOD]: 0.30 mIU mL-1), prostate-specific antigen in patient blood (PSA; LOD: 0.28 ng mL-1) and ampicillin residue in animal milk (AMP; LOD: 0.23 ng mL-1). The results were fully correlated with conventional commercial instruments (R2 = 0.99). The SPICS platform exhibits significant advantages, including portability, cost-effectiveness, easy operation, and rapid and quantitative detection, making it a valuable on-site diagnosis tool for use in home and community healthcare facilities.

Construction and evaluation of AuNPs enhanced electrochemical immunosensors with [Fe(CN)6]3-/4- and PPy probe for highly sensitive detection of human chorionic gonadotropin

Human chorionic gonadotropin (HCG), a vital protein for pregnancy determination and a marker for trophoblastic diseases, finds application in monitoring early pregnancy and ectopic pregnancy. This study presents an innovative approach employing electrochemical immunosensors for enhanced HCG detection, utilizing Anti-HCG antibodies and gold nanoparticles (AuNPs) in the sensor platform. Two sensor configurations were optimized: BSA/Anti-HCG/c-AuNPs/MEL/e-AuNPs/SPCE with [Fe(CN)6]3-/4- as a redox probe (1) and BSA/Anti-HCG/PPy/e-AuNPs/SPCE using polypyrrole (PPy) as a redox probe (2). The first sensor offers linear correlation in the 0.10-500.00 pg∙mL-1 HCG range, with a limit of detection (LOD) of 0.06 pg∙mL-1, sensitivity of 32.25 μA∙pg-1∙mL∙cm-2, RSD <2.47 %, and a recovery rate of 101.03-104.81 %. The second sensor widens the HCG detection range (40.00 fg∙mL-1-5.00 pg∙mL-1) with a LOD of 16.53 fg∙mL-1, ensuring precision (RSD <1.04 %) and a recovery range of 94.61-106.07 % in serum samples. These electrochemical immunosensors have transformative potential in biomarker detection, offering enhanced sensitivity, selectivity, and stability for advanced healthcare diagnostics.

A novel electrochemiluminescence biosensor based on Ru(bpy)32+-functionalized MOF composites and cycle amplification technology of DNAzyme walker for ultrasensitive detection of kanamycin

An electrochemiluminescence (ECL) sensing platform for ultrasensitive and highly selective detection of kanamycin (KANA) was developed based on the prepared Ru(bpy)32+-functionalized MOF (Ru@MOF) composites by hydrothermal synthesis and Ag+-dependent DNAzyme. In this sensor, the stem-loop DNA (HP) with the ferrocene (Fc) was used as substrate chain to quench the ECL emission generated by the Ru@MOF. Using the specific recognition effect between KANA and the KANA aptamer (Apt) and the DNAzyme dependence on Ag+, the KANA aptamer as the pendant strand of the DNAzyme was assembled on Ru@MOF/GCE with the aptamer. When both Ag+ and KANA were present simultaneously, KANA specifically was binded to KANA aptamer as a pendant chain. Subsequently, Ag+-dependent DNAzyme walker continuously cleaved the HP chain and released the modified end of Fc to restore the ECL signal of Ru@MOF composites, thus achieving selective and ultrasensitive detection of KANA. The constructed KANA biosensor exhibits a wide detection range (30 pM to 300 μM) accompanied by a low detection limit (13.7 pM). The KANA in seawater and milk samples are determined to evalute the practical application results of the sensor. This ECL detection strategy could be used for detecting other similar analytes and has broad potential application in biological analysis.

Peptide-antifouling interface for monitoring β-amyloid based on electrochemiluminescence resonance energy transfer

In this study, a novel antifouling electrochemiluminescence (ECL) analytical platform has been developed for the highly sensitive quantification of β-amyloid (Aβ) peptides based on the ECL resonance energy transfer (ECL-RET) mechanism. Specifically, glassy carbon electrodes (GCE) were initially coated with graphite-phase carbon nitride (g-C3N4) nanosheets, followed by the electropolymerization of polyaniline (PANI) onto the electrode surface. Subsequently, a promising peptide motif candidate (COOH-CPPPPDKDKDKDKKLVFF) was immobilized onto the PANI-modified electrode, functioning as a critical component for both antifouling and specific recognition of full-length Aβ peptides. Furthermore, this peptide motif demonstrated inhibitory effects on Aβ aggregation and dissociation. Upon immobilization of the peptide motif, Aβ aptamer-CdS QDs were bound to the electrode surface through peptide-specific interactions with Aβ, thereby facilitating the highly sensitive ECL detection of Aβ. Under the optimal conditions, the proposed biosensor exhibited an Aβ detection range from 0.1 pM to 100 nM with a detection limit of 16.1 fM. As such, this innovative platform offers a straightforward approach to antifouling, quantification, and monitoring of Aβ concentrations in the blood samples.

Advances in human reproductive biomarkers

Reproductive biomarkers are important regulators in women, especially during pregnancy and childbirth. Because of their essential role in women's health, the discovery and quantification of reproductive biomarkers is of great clinical importance. Nowadays, there are many detection strategies to detect these biomarkers, including VEGF, human chorionic gonadotropin (hCG), etc. Consider the limitations and problems of conventional diagnostic methods, new methods are being developed, one of the most important being methods based on nanotechnology. This review includes a review of methods for diagnosing reproductive biomarkers, ranging from mainstream to nanotechnology-based methods. The bulk of this article is an in-depth introduction to the latest advances in biosensor and nanosensor research for the detection and quantitative identification of reproductive biomarkers.

PdPtB Electrochemiluminescence Nanoenhancer and SiC@Au-PEDOT Nanowires-Based Detection of β-Amyloid Oligomers in Alzheimer's Disease

β-Amyloid oligomers (AβOs) are promising biomarkers for the diagnosis of Alzheimer's disease (AD). The present research introduces a novel electrochemiluminescence (ECL) immunosensor based on PdPtB nanoenhancer and SiC@Au-PEDOT nanowires (NWs) for the specific and ultrasensitive detection of AβOs. The PdPtB nanoenhancer exhibited excellent oxidase-like catalytic activity with in situ generation of reactive oxygen species (ROS) to enhance luminol ECL in neutral media. In addition, SiC@Au-PEDOT NWs were utilized as a biocompatible and conductive substrate for the modification of the glassy carbon electrode (GCE). With this design, the ECL immunosensor showed outstanding AβOs analytical performance without exogenous coreactant. The ECL immunosensor demonstrated a favorable linear range of 20 pM to 20 nM and a detection limit of 10 pM under optimized conditions with potential straightforward clinical application. In general, the developed ECL immunosensor provides a promising strategy for the early diagnosis of AD.

An In Situ Investigation of the Protein Corona Formation Kinetics of Single Nanomedicine Carriers by Self-Regulated Electrochemiluminescence Microscopy

Protein coronas are present extensively at the bio-nano interface due to the natural adsorption of proteins onto nanomaterials in biological fluids. Aside from the robust property of nanoparticles, the dynamics of the protein corona shell largely define their chemical identity by altering interface properties. However, the soft coronas are normally complex and rapidly changing. To real-time monitor the entire formation, we report here a self-regulated electrochemiluminescence (ECL) microscopy based on the interaction of the Ru(bpy)3 3+ with the nanoparticle surface. Thus, the heterogeneity of the protein corona is in situ observed in single nanoparticle "cores" before and after loading drugs in nanomedicine carriers. The label-free, optical stable and dynamic ECL microscopy minimize misinterpretations caused by the variation of nanoparticle size and polydispersity. Accordingly, the synergetic actions of proteins and nanoparticles properties are uncovered by chemically engineered protein corona. After comparing the protein corona formation kinetics in different complex systems and different nanomedicine carriers, the universality and accuracy of this technique were well demonstrated via the protein corona formation kinetics curves regulated by competitive adsorption of Ru(bpy)3 3+ and multiple proteins on surface of various carriers. The work is of great significance for studying bio-nano interface in drug delivery and targeted cancer treatment.

Electrochemiluminescent immunosensor for detection of carcinoembryonic antigen using luminol-coated silver nanoparticles

Recently, electrochemiluminescent (ECL) immunosensors have received much attention in the field of biomarker detection. Here, a highly enhanced ECL immunosensing platform was designed for ultrasensitive detection of carcinoembryonic antigen (CEA). The surface of the glassy carbon electrode was enhanced by applying functional nanostructures such as thiolated graphene oxide (S-GO) and streptavidin-coated gold nanoparticles (SA-AuNPs). The selectivity and sensitivity of the designed immunosensor were improved by entrapping CEA biomolecules using a sandwich approach. Luminol/silver nanoparticles (Lu-SNPs) were applied as the main core of the signaling probe, which were then coated with streptavidin to provide overloading of the secondary antibody. The highly ECL signal enhancement was obtained due to the presence of horseradish peroxidase (HRP) in the signaling probe, in which the presence of H₂O₂ further amplified the intensity of the signals. The engineered immunosensor presented excellent sensitivity for CEA detection, with limit of detection (LOD) and linear detection range (LDR) values of 58 fg mL^-1 and 0.1 pg mL^-1 to 5 pg mL^-1 (R² = 0.9944), respectively. Besides its sensitivity, the fabricated ECL immunosensor presented outstanding selectivity for the detection of CEA in the presence of various similar agents. Additionally, the developed immunosensor showed an appropriate repeatability (RSD 3.8%) and proper stability (2 weeks). Having indicated a robust performance in the real human serum with stated LOD and LDR, the engineered immunosensor can be considered for the detection and monitoring of CEA in the clinic.

Sandwich-Type Electrochemiluminescence Immunosensor Based on CDs@dSiO2 Nanoparticles as Nanoprobe and Co-Reactant

In general, co-reactants are essential in highly efficient electrochemiluminescence (ECL) systems. Traditional co-reactants are usually toxic, so it is necessary to develop new environmentally friendly co-reactants. In this work, carbon dots (CDs) were assembled with dendritic silica nanospheres (CDs@dSiO₂ NPs) to form a co-reactant of Ru(bpy)₃²⁺. Subsequently, a sandwich immunosensor for detecting human chorionic gonadotropin (HCG) was constructed based on CDs@dSiO₂ NPs as co-reactants, the nanoprobe loaded with the secondary antibody, and Ru(bpy)₃²⁺ as a luminophore. In addition, compared to directly as a signal probe, the luminophore Ru (bpy)₃²⁺ as a part of the electrolyte solution is simpler in this work. The immunosensor has an extremely low limit of detection of 0.00019 mIU/mL. This work describes the synthesis of low-toxic, efficient, and environmentally friendly CDs, which have become ideal co-reactants of Ru(bpy)₃²⁺, and proposes an ECL immunosensor with excellent stability and selectivity, which has great potential in clinical applications.

A non-invasive smart scaffold for bone repair and monitoring

Existing strategies for bone defect repair are difficult to monitor. Smart scaffold materials that can quantify the efficiency of new bone formation are important for bone regeneration and monitoring. Carbon nanotubes (CNT) have promising bioactivity and electrical conductivity. In this study, a noninvasive and intelligent monitoring scaffold was prepared for bone regeneration and monitoring by integrating carboxylated CNT into chemically cross-linked carboxymethyl chitosan hydrogel. CNT scaffold (0.5% w/v) demonstrated improved mechanical properties with good biocompatibility and electrochemical responsiveness. Cyclic voltammetry and electrochemical impedance spectroscopy of CNT scaffold responded sensitively to seed cell differentiation degree in both cellular and animal levels. Interestingly, the CNT scaffold could make up the easy deactivation shortfall of bone morphogenetic protein 2 by sustainably enhancing stem cell osteogenic differentiation and new bone tissue formation through CNT roles. This research provides new ideas for the development of noninvasive and electrochemically responsive bioactive scaffolds, marking an important step in the development of intelligent tissue engineering.

•

Existing strategies for bone defect repair are difficult to monitor.

•

In this study, a noninvasive and intelligent monitoring scaffold was prepared for bone regeneration and monitoring.

•

This scaffold was a combination of CNT integrated into a chemically cross-linked carboxymethyl chitosan hydrogel.

•

CNT scaffold showed improved mechanical properties with biocompatibility and electrochemical responsiveness.

Hydrogel-Based Biosensors

There is an increasing interest in sensing applications for a variety of analytes in aqueous environments, as conventional methods do not work reliably under humid conditions or they require complex equipment with experienced operators. Hydrogel sensors are easy to fabricate, are incredibly sensitive, and have broad dynamic ranges. Experiments on their robustness, reliability, and reusability have indicated the possible long-term applications of these systems in a variety of fields, including disease diagnosis, detection of pharmaceuticals, and in environmental testing. It is possible to produce hydrogels, which, upon sensing a specific analyte, can adsorb it onto their 3D-structure and can therefore be used to remove them from a given environment. High specificity can be obtained by using molecularly imprinted polymers. Typical detection principles involve optical methods including fluorescence and chemiluminescence, and volume changes in colloidal photonic crystals, as well as electrochemical methods. Here, we explore the current research utilizing hydrogel-based sensors in three main areas: (1) biomedical applications, (2) for detecting and quantifying pharmaceuticals of interest, and (3) detecting and quantifying environmental contaminants in aqueous environments.

Ratiometric ECL sensor based on Apt-AuNS@Lu nanoprobe for analyzing cell swelling-induced ATP release

A novel ratiometric electrochemiluminescence (ECL) system based on gold nanostars (AuNSs) support was constructed for the determination of hypotonicity-induced ATP release from HepG2 cells. AuNS@Lu nanoprobe was used as anodic luminophore and K₂S₂O₈ as cathodic luminophore as well as anodic co-reactant. AuNS with the large specific surface was adopted to adsorb plentiful luminol to form solid-state probe and as affinity support to immobilize ATP aptamer (Apt). The obtained nanocomposite (Apt-AuNS@Lu) generated a strong ECL signal at + 0.4 V (vs. Ag/AgCl) with co-reactant K₂S₂O₈, because of excellent conductivity and catalytic activity of AuNS. Furthermore, graphene oxide was reduced onto indium tin oxide (ITO) electrodes to facilitate the electron transfer. Following, polydopamine (PDA) film was formed via self-polymerization, improving stability and adhesion of the electrode surface. To immobilize ATP capture aptamer (Apt_C), abounding AuNSs were attached to RGO/PDA surface. When the sensor was incubated in the mixture solution of Apt-AuNS@Lu and target ATP, the ECL signal of Apt-AuNS@Lu increased with the increase of ATP concentration, meanwhile, the signal of K₂S₂O₈ declined. The ratio of the two luminophores was used for the quantitative determination of ATP. The linear range was 5 to 250 nM, and the limit of detection was 1.4 nM at (3σ)/S. The method was successfully applied to analyze ATP release from HepG2 cells stimulated by 0.45% NaCl hypotonic solution. The results showed that the release kinetics profile of ATP had a sigmoidal shape with rapid release within 10 min and then slowed. Compared to the isotonic groups, the intracellular ATP concentration was 3.7 ± 0.3 µM (n = 3) decreasing by 40.3% and the extracellular was 23.4 ± 1.2 nM (n = 3) increasing by 9.2 times in the hypotonicity for 10 min, which showed ATP release from cells and good agreement with commercial ELISA test. The proposed strategy would be beneficial to broadening application of ECL technology in studying cell biological functions.

Development of sandwich electrochemiluminescence immunosensor for COVID-19 diagnosis by SARS-CoV-2 spike protein detection based on Au@BSA-luminol nanocomposites

Coronavirus disease (COVID-19) is a new and highly contagious disease posing a threat to global public health and wreaking havoc around the world. It's caused by the Coronavirus that causes severe acute respiratory syndrome (SARS-CoV-2). In the current pandemic situation, rapid and accurate SARS-CoV-2 diagnosis on a large scale is critical for early-stage diagnosis. Early detection and monitoring of viral infections can aid in controlling and preventing infection in large groups of people. Accordingly, we developed a sensitive and high-throughput sandwich electrochemiluminescence immunosensor based on antigen detection for COVID-19 diagnosis (the spike protein of SARS-CoV-2). For the spike protein of SARS-CoV-2, the ECL biosensor had a linear range of 10 ng mL-1 to 10 µg mL-1 with a limit of detection of 1.93 ng mL-1. The sandwich ECL immunosensor could be used in early clinical diagnosis due to its excellent recovery in detecting SARS-CoV-2, rapid analysis (90 min), and ease of use.

A portable electrochemiluminescence aptasensor for β-lactoglobulin detection

Cow’s milk allergy is one of the most common food allergies in children with a prevalence of around 2.5%. Milk contains several allergens; the main ones are caseins and β-lactoglobulin (β-LG). At regulatory level, β-LG is not explicitly named, but milk is included in the list of substances or products causing allergies or intolerances. Hence, the presence of β-LG can be a useful marker for determining the presence of milk in food. In this work, we present an aptasensor based on electrochemiluminescence (ECL) for the quantification of β-LG in real food matrices displaying integrated advantages consisting of high specificity, good sensitivity, portability, and cost effectiveness. The performance and applicability of this sensor were tested by analyzing a sample of skimmed milk and an oat-based drink proposed as a vegetable substitute for milk of animal origin. We obtained a linear correlation between the intensity of the signal and the concentration of β-LG standard solutions (y = x * 0.00653 + 1.038, R² = 0.99). The limit of detection (LOD) and the limit of quantification (LOQ) were found to be 1.36 and 4.55 μg L⁻¹, respectively.

Ultrasensitive and preprocessing-free electrochemical biosensing platform for the detection of cancer-derived exosomes based on spiky-shaped aptamer-magnetic beads

Cancer-derived exosomes, as liquid biopsy markers, have been shown to play an important role in the early screening, diagnosis, and prognosis of cancer. However, existing detection methods have shortcomings such as long-time consumption and low sensitivity. Herein, a sandwich-type electrochemical sensing platform based on Prussian blue/graphene oxide (GO/PB) and spiky Au@Fe₃O₄ nanoparticles was successfully designed and constructed to detect tumor-derived exosomes with high sensitivity and no preprocessing. In this strategy, nanospike structures were introduced on magnetic beads to form spiky Au@Fe₃O₄, which was used to enrich exosomes from serum, avoiding the extraction and purification processes of previous detections. The enrichment and signal amplification of spiky Au@Fe₃O₄ could also greatly improve the detection sensitivity of the sensing platform. Consequently, the concentration of exosomes could be directly quantified by monitoring the electroactive molecules of PB. Therefore, the limit of detection (LOD) of the proposed biosensor was 80 particles·μL^-1. Furthermore, this proposed biosensor could realize the high sensitivity analysis of exosomes and effectively save detection time, and provide an effective assistant diagnostic tool for the early diagnosis of cancer.

Injectable Hydrogel Based on Defect-Rich Multi-Nanozymes for Diabetic Wound Healing via an Oxygen Self-Supplying Cascade Reaction

Diabetic wound healing remains challenging owing to the risk for bacterial infection, hypoxia, excessive glucose levels, and oxidative stress. Glucose-activated cascade reactions can consume glucose and eradicate bacteria, avoiding the direct use of hydrogen peroxide (H₂ O₂ ) and wound pH restriction on peroxidase-like activity. However, the anoxic microenvironment in diabetic wounds impedes the cascade reaction due to the oxygen (O₂ ) dependence of glucose oxidation. Herein, defect-rich molybdenum disulfide nanosheets loaded with bovine serum albumin-modified gold nanoparticle (MoS₂ @Au@BSA NSs) heterostructures are designed and anchored onto injectable hydrogels to promote diabetic wound healing through an O₂ self-supplying cascade reaction. BSA decoration decreases the particle size of Au, increasing the activity of multiple enzymes. Glucose oxidase-like Au catalyzes the oxidation of glucose into gluconic acid and H₂ O₂ , which is transformed into a hydroxyl radical (•OH) catalyzed by peroxidase-like MoS₂ @Au@BSA to eradicate bacteria. When the wound pH reaches an alkalescent condition, MoS₂ @Au@BSA mimicks superoxide dismutase to transform superoxide anions into O₂ and H₂ O₂ , and decomposes endogenous and exogenous H₂ O₂ into O₂ via catalase-like mechanisms, reducing oxidative stress, alleviating hypoxia, and facilitating glucose oxidation. The MoS₂ @Au@BSA nanozyme-anchored injectable hydrogel, composed of oxidized dextran and glycol chitosan crosslinked through a Schiff base, significantly accelerates diabetic wound healing.

Electrochemical Cytosensor Based on a Gold Nanostar-Decorated Graphene Oxide Platform for Gastric Cancer Cell Detection

Effectively capturing and sensitively detecting cancer cells are critical to clinical diagnosis and cancer therapy. In this work, we prepared gold nanostar-decorated graphene oxide (GO-AuNSs) nanocomposites using a ultraviolet (UV)-induced strategy, and then modified them with a layer of bio-complex rBSA-FA (coupled reduced bovine serum albumin with folic acid) to generate GO-AuNSs@rBSA-FA nanocomposites. Herein, the application of GO and AuNSs not only strengthened the conductivity of the sensing platform but also guaranteed nanocomposites with biocompatible performance. Moreover, the adopted rBSA-FA layer could effectively enhance the stability and specificity towards gastric cancer cells (MGC-803). According to a systemic construction procedure, a novel electrochemical cytosensor based on GO-AuNSs@rBSA-FA was fabricated for MGC-803 cell detection. With the assistance of cyclic voltammetry (CV) and differential pulse voltammetry (DPV), the cytosensor reached a detection limit of 100 cell/mL in a wide linear range of 3 × 10²~7 × 10⁶ cell/mL towards MGC-803 cells. The good electrochemical characteristics for the cancer cell analysis indicate a promising prospect of this electrochemical cytosensor in clinical cancer diagnosis.

Label-free electrochemical biosensor for determination of procalcitonin based on graphene-wrapped Co nanoparticles encapsulated in carbon nanobrushes coupled with AuPtCu nanodendrites

A new label-free electrochemical immunosensor was constructed for quantitative detection of procalcitonin (PCT), by employing AuPtCu nanodendrites (AuPtCu NDs, prepared by a one-pot solvothermal method) and graphene-wrapped Co nanoparticles encapsulated in 3D N-doped carbon nanobrushes (G-Co@ NCNBs), obtained by self-catalyzed chemical vapor deposition as immune-sensing platform. Impressively, the home-made nanocomposite enlarged the highly accessible active sites and promoted the mass/electron transport, in turn showing the efficient synergistic catalysis towards H₂O₂ reduction, combined by greatly increasing the loading capacity of the PCT antibody (Ab). The as-constructed sensor displayed a dynamic linear range of 0.0001 ~ 100 ng mL^-1 along with an ultra-low limit of detection (LOD = 0.011 pg mL^-1, S/N = 3) and was further explored for determination of PCT in a diluted serum sample with acceptable results. The sensor provides some valuable guidelines for bioassay and early diagnosis of sepsis.

CuS@BSA-NB2 Nanoparticles for HER2-Targeted Photothermal Therapy

Breast cancer is characterized by the uncontrolled proliferation of breast epithelial cells under the action of a variety of carcinogens. Although HER2-inhibitors were currently applied for HER2-positive breast cancer patients, they didn't work for patients with resistance to HER2-targeted anti-cancer drugs. In this work, we prepared novel CuS@BSA-NB2 nanoparticles (NPs) for breast cancer photothermal therapy (PTT). The NPs had good biocompatibility due to the Bovine Serum Albumin (BSA) encapsulating and excellent targeting to HER2 because of nanobody 2 (NB2). Under 808 nm laser irradiation, CuS@BSA-NB2 NPs had high photothermal conversion efficiency and photothermal stability. Meanwhile, we constructed a stable cell line of MDA-MB-231/HER2 with a high expression of HER2 protein. Immunofluorescence and ICP-MS assays showed that CuS@BSA-NB2 NPs can be specifically enriched and be ingested in MDA-MB-231/HER2 cells. Furthermore, CuS@BSA-NB2 NPs had shown a more significant photothermal treatment effect than CuS@BSA under certain treatment conditions for MDA-MB-231/HER2. In addition, the cytotoxicity assay demonstrated that CuS@BSA-NB2 NPs had a low toxicity for MDA-MB-231/HER2 cells. The above results suggested that CuS@BSA-NB2 NPs were great photothermal therapeutic agents to reduce the malignant proliferation of breast epithelial cells and have potential for breast cancer therapy.

Nanotechnology-based approaches for effective detection of tumor markers: A comprehensive state-of-the-art review

As well-appreciated biomarkers, tumor markers have been spotlighted as reliable tools for predicting the behavior of different tumors and helping clinicians ascertain the type of molecular mechanism of tumorigenesis. The sensitivity and specificity of these markers have made them an object of even broader interest for sensitive detection and staging of various cancers. Enzyme-linked immunosorbent assay (ELISA), fluorescence-based, mass-based, and electrochemical-based detections are current techniques for sensing tumor markers. Although some of these techniques provide good selectivity, certain obstacles, including a low sample concentration or difficulty carrying out the measurement, limit their application. With the advent of nanotechnology, many studies have been carried out to synthesize and employ nanomaterials (NMs) in sensing techniques to determine these tumor markers at low concentrations. The fabrication, sensitivity, design, and multiplexing of sensing techniques have been uplifted due to the attractive features of NMs. Various NMs, such as magnetic and metal nanoparticles, up-conversion NPs, carbon nanotubes (CNTs), carbon-based NMs, quantum dots (QDs), and graphene-based nanosensors, hyperbranched polymers, optical nanosensors, piezoelectric biosensors, paper-based biosensors, microfluidic-based lab-on-chip sensors, and hybrid NMs have proven effective in detecting tumor markers with great sensitivity and selectivity. This review summarizes various categories of NMs for detecting these valuable markers, such as prostate-specific antigen (PSA), human carcinoembryonic antigen (CEA), alpha-fetoprotein (AFP), human chorionic gonadotropin (hCG), human epidermal growth factor receptor-2 (HER2), cancer antigen 125 (CA125), cancer antigen 15-3 (CA15-3, MUC1), and cancer antigen 19-9 (CA19-9), and highlights recent nanotechnology-based advancements in detection of these prognostic biomarkers.

Chemiluminescence Detection in the Study of Free-Radical Reactions. Part 2. Luminescent Additives That Increase the Chemiluminescence Quantum Yield

The present review examines the use of chemiluminescence detection to evaluate the course of free radical reactions in biological model systems. The application of the method is analyzed by using luminescent additives that enhance the luminescence thanks to a triplet-singlet transfer of the electron excitation energy from radical reaction products and its emission in the form of light with a high quantum yield; these additives are called chemiluminescence enhancers or activators. Examples of these substances are provided; differences between the so-called chemical and physical enhancers are described; coumarin derivatives, as the most promising chemiluminescence enhancers for studying lipid peroxidation, are considered in detail. The main problems related to the use of coumarin derivatives are defined, and possible ways of solving these problems are presented. Intrinsic chemiluminescence and the mechanism of luminescence accompanying biomolecule peroxidation are discussed in the first part of the review.

An ECL sensor combined with a paper electrode for the determination of phenylalanine

An electrochemiluminescence (ECL) sensor combined with a paper electrode was developed for the detection of phenylalanine (l-Phe) in blood samples.

A High-Throughput Platform for the Rapid Quantification of Phosphorylated Histone H2AX in Cell Lysates Based on Microplate Electrochemiluminescence Immunosensor Array

Sensitive detection of phosphorylated histone H2AX (γH2AX) in cells as a biomarker of DNA double-strand breaks has great significance in the field of molecular toxicology and life science research. However, current γH2AX detection methods require labor- and time-consuming steps. Here, for the first time, we designed a simple electrochemiluminescence (ECL) immunoassay integrated with a microplate-based sensor array to realize sensitive and high-throughput detection of γH2AX in cell lysates. Under the optimized conditions, this ECL immunosensor array could linearly respond to γH2AX concentrations in the range from 2 × 10² to 1 × 10⁵ pg/mL. In addition, our approach possessed excellent specificity and satisfactory reproducibility, and its practicality was verified in real cell lysates. The whole process including instrumental and manual operation was completed in no more than 3 h. This study provides a convenient and rapid alternative method for the sensitive quantification of γH2AX, which shows promising application in high-throughput screening of genotoxic chemicals and drug candidates.

A dual signal-amplified electrochemiluminescence immunosensor based on core-shell CeO2-Au@Pt nanosphere for procalcitonin detection

A dual signal-amplified sandwich electrochemiluminescence (ECL) immunosensor was fabricated for trace detection of procalcitonin (PCT). CeO₂-Au@Pt composed of sea urchin-like Au@Pt nanoparticles coated on CeO₂ hollow nanospheres was immobilized on electrode surface to electrochemically catalyze H₂O₂ to produce a large number of superoxide anion (O₂^•-). The immunosensor was prepared by linking the capture antibody on immobilized CeO₂-Au@Pt with heptapeptide (HWRGWVC), which could maintain the activity of the antibody. The prepared Au star@BSA was used to bind abundant luminol for labeling the secondary antibody (Ab₂). Upon the sandwich-typed immunoreactions, the O₂^•- could react with the introduced luminol on the immunosensor surface to produce strong ECL intensity. With an outstanding linear detection range and a low detection limit of 17 fg/mL, the ECL immunosensor permitted ultrasensitive detection of PCT at a low H₂O₂ concentration and demonstrated its high application potential in the clinical assay.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

A label-free electrochemical immnunosensor based on signal magnification of oxygen reduction reaction catalyzed by uniform PtCo nanodendrites for highly sensitive detection of carbohydrate antigen 15-3

Developing a highly sensitive immunoassay for tumor biomarkers is particularly important in bioanalysis and early disease diagnosis. In this work, a simple one-pot solvothermal method was developed for controllable synthesis of well-dispersed PtCo alloyed nanodendrites (PtCo NDs) by using l-carnosine as the co-structure-directing agent. The PtCo NDs had a large specific surface area and provided abundant active sites available for electrocatalytic oxygen reduction reaction (ORR). Based on the highly enhanced currents of the ORR, a novel label-free electrochemical immunosensor was fabricated for highly sensitive assay of carbohydrate antigen 15-3 (CA15-3). The sensor showed a wide linear range of 0.1-200 U mL^-1 and a low limit of detection (LOD) down to 0.0114 U mL^-1 (S/N = 3), in turn exploring its application to diluted human serum samples with satisfactory results. This study provides a feasible platform for monitoring other tumor markers in clinical diagnosis.

From prevention to diagnosis and treatment: Biomedical applications of metal nanoparticle-hydrogel composites

Recent advances in biomaterials integrate metal nanoparticles with hydrogels to generate composite materials that exhibit new or improved properties. By precisely controlling the composition, arrangement and interactions of their constituents, these hybrid materials facilitate biomedical applications through myriad approaches. In this work we seek to highlight three popular frameworks for designing metal nanoparticle-hydrogel hybrid materials for biomedical applications. In the first approach, the properties of metal nanoparticles are incorporated into a hydrogel matrix such that the composite is selectively responsive to stimuli such as light and magnetic flux, enabling precisely activated therapeutics and self-healing biomaterials. The second approach mediates the dynamic reorganization of metal nanoparticles based on environment-directed changes in hydrogel structure, leading to chemosensing, microbial and viral detection, and drug-delivery capabilities. In the third approach, the hydrogel matrix spatially arranges metal nanoparticles to produce metamaterials or passively enhance nanoparticle properties to generate improved substrates for biomedical applications including tissue engineering and wound healing. This article reviews the construction, properties and biomedical applications of metal nanoparticle-hydrogel composites, with a focus on how they help to prevent, diagnose and treat diseases. Discussion includes how the composites lead to new or improved properties, how current biomedical research leverages these properties and the emerging directions in this growing field.

A three-dimensional CoNi-MOF nanosheet array-based immunosensor for sensitive monitoring of human chorionic gonadotropin with core-shell ZnNi-MOF@Nile Blue nanotags

A CoNi-based metal-organic framework (CoNi-MOF) nanosheet array is synthesized by the treatment of a CoNi layered double hydroxide nanosheet array on Ni foam with 3,5-diaminobenzoic acid. The CoNi-MOF nanosheet array with amino and carboxyl groups can be used to capture the human chorionic gonadotropin (HCG) primary antibody (HCG Ab1). Nile Blue decorated ZnNi-MOF (NB@ZnNi-MOF) spheres immobilized with HCG secondary antibodies (HCG Ab2) are used for signal amplification. When HCG exists in an analytical sample, a sandwich structure is formed and an electrochemical signal is produced. The analytical signal generated during the detection is caused by the conversion of Co(ii) and Co(iii) in the CoNi-MOF nanosheet array. The Nile Blue of the NB@ZnNi-MOF sphere, as a kind of redox-active species, is responsible for the electrochemical signal amplification in the immunosensor. On the basis of the above advantages, the HCG immunosensor exhibits a lower limit of detection (1.85 × 10-3 mIU mL-1) and a wide linear range from 0.005 mIU mL-1 to 250 mIU mL-1. Additionally, this immunosensor is used to quantitatively detect HCG in human blood serum and shows good correlations with the standard enzyme-linked immunosorbent assay (ELISA), providing a high value on clinical diagnosis.

Facile nano-free electrochemiluminescence biosensor for detection of sulphamethoxazole via tris(2,2'-bipyridyl)ruthenium(II) and N-methyl pyrrolidone recognition

The electrochemiluminescence (ECL) system based on the ruthenium complex has become a powerful tool in the field of analytical chemistry. However, the non-aqueous ECL luminescence system, which does not involve complex nano-modification, has not been widely used for the determination of analytes. In this study, N-methyl pyrrolidone was selected as the solvent, and it could also act as a co-reactant of [inline-formula removed]. Based on this, a simple ECL system without nanomaterials was established. Strong ECL was generated. Furthermore, a quenching effect between the excited state of [inline-formula removed] and sulphamethoxazole (SMZ) was observed. Based on this, a sensitive ECL sensor for detecting SMZ is constructed. A linear relationship between ECL signal quenching intensity (ΔI) and the logarithm of SMZ concentration (log C) in the concentration range of 1 × 10^-7-1 × 10^-5 mol/l is obtained. The limit of detection is as low as 3.33 × 10^-9 mol/l. The method has been applied to the detection of SMZ in tap water samples with different concentration levels with satisfactory results, and the recovery was 95.3-102.6%.

Silica-Coated, Waxberry-like Surface-Enhanced Raman Resonant Scattering Tag-Pair with Near-Infrared Raman Dye Encoding: Toward In Vivo Duplexing Detection

Surface-enhanced Raman resonant scattering (SERRS) tags encoded with near-infrared (NIR) Raman reporters showed great potential for in vivo detection owing to their ultrasensitivity. However, in vivo signal stability of such tags is a remaining problem due to the lack of suitable silica coating method because the weakly adsorbed NIR reporters tend to detach from traditional gold nanosubstrates in the ethanol-rich and high pH conditions, which are commonly used for silica coating. Herein, we propose a silica coating method for NIR SERRS tags by using waxberry-like gold nanoparticles (NPs) as substrates. The lipid bilayer of the NPs played a crucial role in the coating, which can encapsulate the NIR Raman reporter via hydrophobic interactions and prevent the interference from a harsh medium. Thus, the silica-coated tags well preserved ultrasensitivity of bare tags and simultaneously gained satisfactory signal stability in vivo. Moreover, the coating method is compatible for the encapsulation of a variety of thiol group-free NIR reporters (as exemplified by DTTC, Cy7, IR792, and DIR), relying on which a tag-pair with distinguishable peaks can be screened (labeling with DTTC and Cy7, respectively). In vivo duplexing detection revealed that the tag-pair-labeled liposome was cleared faster in the liver than polydopamine NPs within one mouse. The developed method paves an easy way for gaining high-quality SERRS tags and will promote their in vivo multiplex analysis and diagnostics applications.

Electrochemical monitoring of alcohol in sweat

Rapid, periodic monitoring and detection of ethanol (EtOH) after consumption via a non-invasive measurement has been an area of increased research in recent years. Current point-of-care or on-site detection strategies rely on single use sensors which are inadequate for monitoring during a longer period. A low cost, portable and novel approach is developed here for real-time monitoring over several days utilising electrochemical techniques. The sensor shows oxidation of the ethanol in phosphate buffer and artificial sweat using the amperometric response from the application of +0.9 V to the polyaniline modified screen printed electrode using 1 mM EtOH as the averaged amount of EtOH eliminated in sweat after the consumption of one alcoholic beverage. Our enzyme based electrochemical sensor exhibits a qualitative assessment of the presence of EtOH in small volumes (≤40 μL) of 0.1 M sodium bicarbonate and subsequently artificial sweat, with 50 measurements taken daily over 11 days. While quantitative information is not obtained, the sensor system exhibits excellent stability after 3 months' dried storage in this complex biological matrix in an oxygen free cabinet. This addresses one of the key challenges for enzyme based electrochemical sensors, namely, the ability for real-time monitoring in complex biological matrices. The qualitative response illustrates the potential for this sensor to be exploited by non-experts which suggests the promise for their wider application in next-generation wearable electronics necessary for alcohol monitoring.

Electrochemiluminescence immunoassay of human chorionic gonadotropin using silver carbon quantum dots and functionalized polymer nanospheres

A composite, reduced graphene oxide (rGO) doped with silver nanoparticles (Ag NPs), was prepared by using binary reductants of sodium citrate and hydrazine hydrate. Carbon quantum dots (CQDs) synthesized by papaya peel combined with silver ions to form a CQDs-loaded silver nanoparticle (AgCQDs) nanocomposite. Polymer nanospheres (PNS) were generated via the infinite coordination polymer of ferrocene dicarboxylic acid and employed as carriers to load AgCQDs. The prepared AgCQDs@PNS-PEI has good biocompatibility and electrical conductivity and can be used as a matrix for the immobilization of a secondary antibody (Ab2). A sandwich-type electrochemiluminescence (ECL) immunosensor using AgCQDs@PNS-PEI nanocomposite as probe has been developed for the detection of human chorionic gonadotropin (HCG). The proposed immunosensor exhibits a linear range from 0.00100 to 500 mIU mL^-1 and the detection limit is 0.33 μIU mL^-1 (S/N = 3) under optimal conditions. The sensor exhibits excellent selectivity, good reproducibility, and high stability. These features demonstrate that the proposed method has promising potential for clinical protein detection and displays a new strategy to fabricate an immunosensor. Graphical abstract.

Advancements in Hydrogel-Functionalized Immunosensing Platforms

Explicit antigen-antibody binding has accelerated the development of immunosensors for the detection of various analytes in biomedical and environmental domains. Being a subclass of biosensors, immunosensors have been a significant area of research in attaining high sensitivity and an ultralow sensing limit to detect biological analytes present in trace levels. The highly porous structure, large surface area, and excellent biocompatibility of hydrogels enabling the retainability of the activity and innate framework of the attached biomolecules make them a suitable candidate for immunosensor fabrication. Hydrogels based on polycarboxylate, cellulose, polyaniline, polypyrrole, sodium alginate, chitosan, and agarose are exploited in conjunction with other nanomaterials such as AuNPs, GO, and MWCNTs to augment the electron transfer during the immunosensing mechanism. Surface plasmon resonance, electrochemiluminescence, colorimetric, and electrochemical assays are different strategies utilized for the signal transduction in hydrogel-based immunosensors during the formation of the antigen-antibody complex. These hydrogel-based immunosensors exhibit rapid response, excellent stability, reproducibility, high selectivity and high sensitivity, a broad range of detection, an ultralow limit of detection, and display results similar to those for the ELISA test. This review propounds different hydrogel-functionalized immunosensing platforms classified on the basis of their signal transduction for the detection of disparate cancer biomarkers (tumor necrosis factor, α-fetoprotein, prostate-specific antigen, carbohydrate antigen 24-2, carcinoembryonic antigen, neuron-specific enolase, and cytokeratin antigen 21-1), hormones (cortisol, cortisone, and human chorionic gonadotropin), human IgG, and ractopamine in animal feeds.

A highly sensitive signal-on biosensor for microRNA 142-3p based on the quenching of Ru(bpy)32+–TPA electrochemiluminescence by carbon dots and duplex specific nuclease-assisted target recycling amplification

CDs have been used to quench the ECL of Ru(bpy)₃²⁺–TPA for the first time and a sensitive biosensor was developed.

Electrochemiluminescence detection of cardiac troponin I based on Au–Ag alloy nanourchins

In this work, an Au–Ag alloy nanourchin (Au–Ag alloy NU) based electrochemiluminescent (ECL) sensor for the measurement of cardiac troponin I (cTnI) was developed.

High antiviral activity of mercaptoethane sulfonate functionalized Te/BSA nanostars against arterivirus and coronavirus

Mercaptoethane sulfonate functionalised Te/BSA nanostars are prepared and exhibit excellent antiviral activity against arteriviruses and coronaviruses.