2D titanium carbide MXenes as emerging optical biosensing platforms

Biodegradable MXene Quantum Dots with High Near-Infrared Photothermal Performance for Cancer Treatment

Photothermal therapy (PTT) offers significant potential in cancer treatment due to its short, simple, and less harmful nature. However, obtaining a photothermal agent (PTA) with good photothermal performance and biocompatibility remains a challenge. MXenes, which are PTAs, have shown promising results in cancer treatment. This study presents the preparation of Ti3C2 MXene quantum dots (MXene QDs) using a simple hydrothermal and ultrasonic method and their use as a PTA for cancer treatment. Compared to conventional MXene QDs synthesized using only the hydrothermal method, the ultrasonic process increased the degree of oxidation on the surface of the MXene QDs. This resulted in the presence of more hydrophilic groups such as hydroxyl groups on the MXene QD surfaces, leading to excellent dispersion in the aqueous system and biocompatibility of the prepared MXene QDs without the need for surface modification. The MXene QDs showed great photothermal performance with a photothermal conversion efficiency of 62.5%, resulting in the highest photothermal conversion efficiency among similar materials reported thus far. Both in vitro and in vivo experiments have proved the potent tumor inhibitory effect of the MXene QD-mediated PTT, with minimal harm to mice. Therefore, these MXene QDs hold a significant promise for clinical applications.

Electrochemical Stability of MXenes in Water Based on Constant Potential AIMD Simulations

MXene has been recently explored as promising electrocatalytic materials to accelerate the electrocatalytic process for hydrogen evolution, but their dynamic stability under electrochemical conditions remains elusive. Here we performed first-principle ab initio molecular dynamics calculations to reveal the electrochemical stability of Ti2CTx MXene in different aqueous environments. The results revealed the high vulnerability of the pure and vacancy-defected Ti2CO2 MXene towards water attack, leading to surface oxidation of MXene under neutral electrochemical condition that formed adsorbed oxygen species to Ti and dissociated proton in solution. The surface oxidation of Ti2CO2 could be prevented in the acid condition or in the neutral condition under the negative potential. Differently, the fully F- or OH-functionalized Ti2CF2 and Ti2C(OH)2 as well as the mixed functionalized Ti2C(O0.5OH0.5)2 and Ti2CO1.12F0.88 are highly stable under various electrochemical conditions, which can effectively prevent close contact between water and surface Ti atoms via electronic repulsion or steric hindrance. These findings provide atomic level understanding of the aqueous stability of MXene and provide useful strategies to prevent degradation and achieve highly stable MXenes.

Analyte-perturbed balance between reducibility and fluorescence of Ti3C2 MXene quantum dots for label-free, dual-mode detection of silver ions

BACKGROUND

As an emerging and attractive low-dimensional functional materials, Ti3C2 MXene quantum dots (QDs) enlarge the toolbox of fluorescence sensing. However, monochromatic fluorescence, which only provide one single signal, is often beset by challenges such as false-positive readouts and limitations in selectivity. Consequently, to improve the sensing accuracy by means of cross-verified dual-signal authentication, the endeavor to engineer dual-mode nanoprobes based on Ti3C2 QDs, incorporating both the capability of fluorescence and an alternative sensing mechanism, emerges as a compelling avenue.

RESULTS

Here, based on the alterations in colorimetric and fluorescent signals of Ti3C2 QDs with the addition of Ag+, we propose a dual-mode sensor obviating the necessity for nanoprobe labeling. Owing to the decent reducibility of Ti3C2 QDs, Ag+ is adsorbed and reduced, resulting in the generation of plasmonic Ag nanoparticles (NPs), which simultaneously trigger colorimetric responses of the solution and enhance the fluorescent emission of Ti3C2 QDs. The confluence of colorimetry and fluorometry within this strategy optimally harnesses the modulating role of the acquired Ag NPs on the reducing capability and fluorescence characteristics of Ti3C2 QDs. The equilibrium imparts versatility and promising prospects to this analyte-triggered label-free method, which enables a remarkable specificity and an excellent detecting limit (0.45 μM) for Ag+.

SIGNIFICANCE

The balance between reducibility and fluorescence of Ti3C2 QDs for dual-mode detection is inventively demonstrated. With the exemplification of a direct influence of both features of the nanoprobe via the introduction of analytes, this study opens the feasibility of the analyte-perturbed felicitous equilibrium, which endows label-free methods with versatility and promising prospects. This design may evoke more biosensing strategies with the function of double-signal mutual verification.

Ti3C2 MXene-based nanozyme as coreaction accelerator for enhancing electrochemiluminescence of glucose biosensing

Delamination of the exfoliated multilayer MXenes with electro-catalysts, not only leads to increasing surface area for high electrochemiluminescent (ECL) signal tracer loading but also provides highly sensitive achievements in a coreaction accelerator manner. To this end, herein, we used bromophenol blue (BPB)-delaminated multilayer Ti3C2 MXene as both a coreaction accelerator to promote the electrochemiluminescent (ECL) reaction rate of luminol (LUM) and the co-reactant H2O2 and a substrate for retaining high loading of glucose oxidase (GOx)-conjugated polyethylene imine (PEI) along with luminophore species into more open structure of Ti3C2 MXene for sensitive detection of glucose. In the presence of glucose, in situ generating H2O2 product through a GOx-catalyzed process could produce abundant •OH radicals via the peroxidase-like activity of the BPB@Ti3C2 in the LUM ECL reaction. Moreover, decreasing the distance between the high-content LUM into the BPB@Ti3C2 and the generated •OH, minimizes the decomposition of highly active •OH, providing a superb ECL signal. Last, the proximity of incorporated GOx into the delaminated Ti3C2 MXene near the electrode allows efficient electron transfer between the electrode and enzyme. The integration of such amplifying effects endowed high sensitivity and excellent selectivity for glucose with a low limit of detection of 0.02 μM in the wide range of 0.01 μM-40,000 μM, enabling the feasibility of the glucose analysis in human serum samples. Overall, the enhanced ECL based on the BPB@Ti3C2 opens a new horizon to develop highly sensitive MXene-based ECL toward the field of biosensors.

Catalytic MXCeO2 for enzyme based electrochemical biosensors: Fabrication, characterization and application towards a wearable sweat biosensor

Two-dimensional (2D) layered materials that integrate metallic conductivity, catalytic activity and the ability to stabilize biological receptors provide unique capabilities for designing electrochemical biosensors for large-scale detection and diagnostic applications. Herein, we report a multifunctional MXene-based 2D nanostructure decorated with enzyme mimetic cerium oxide nanoparticle (MXCeO2) as a novel platform and catalytic amplifier for electrochemical biosensors, specifically targeting the detection of oxidase enzyme substrates. We demonstrate enhanced catalytic efficiency of the MXCeO2 for the reduction of hydrogen peroxide (H2O2) and its ability to immobilize oxidase enzymes, such as glucose oxidase, lactate oxidase and xanthine oxidase. The designed biosensors exhibit high selectivity, stability, and sensitivity, achieving detection limits of 0.8 μM H2O2, 0.49 μM glucose, 3.6 μM lactate and 1.7 μM hypoxanthine, when the MXCeO2 and their respective enzymes were used. The MXCeO2 was successfully incorporated into a wearable fabric demonstrating high sensitivity for lactate measurements in sweat. The unique combination of MXenes with CeO2 offers excellent conductivity, catalytic efficiency and enhanced enzyme loading, demonstrating potential of the MXCeO2 as a catalytically active material to boost efficiency of oxidase enzyme reactions. This design can be used as a general platform for increasing the sensitivity of enzyme based biosensors and advance the development of electrochemical biosensors for a variety of applications.

MXenes as emerging adsorbents for removal of environmental pollutants

MXenes are a recently emerging class of two-dimensional nanomaterials that have gained considerable interest in the field of environmental protection. Owing to their high surface area, abundant terminal groups, and unique two-dimensional layered structures, MXenes have demonstrated high efficacy as adsorbents for various pollutants. Here we focused on the latest developments in the field of MXene-based adsorbents, including the structure and properties of MXenes, their synthesis and modification methods, and their adsorption performance and mechanisms for various pollutants. Among the pollutants that have been reported to be adsorbed by MXenes are radionuclides (U(VI), Sr(II), Cs(I), Eu(III), Ba(II), Th(IV), and Tc(VII)/Re(VII)), heavy metals (Hg(II), Cu(II), Cr(VI), and Pb(II)), dyes, per- and polyfluoroalkyl substances (PFAS), antibiotics (tetracycline, ciprofloxacin, and sulfonamides), antibiotic resistance genes (ARGs), and other contaminates. Moreover, future directions in MXene research are also suggested in this review.

Harnessing two-dimensional nanomaterials for diagnosis and therapy in neurodegenerative diseases: Advances, challenges and prospects

Neurodegenerative diseases (NDDs) are specific brain disorders characterized by the progressive deterioration of different motor activities as well as several cognitive functions. Current conventional therapeutic options for NDDs are limited in addressing underlying causes, delivering drugs to specific neuronal targets, and promoting tissue repair following brain injury. Due to the paucity of plausible theranostic options for NDDs, nanobiotechnology has emerged as a promising field, offering an interdisciplinary approach to create nanomaterials with high diagnostic and therapeutic efficacy for these diseases. Recently, two-dimensional nanomaterials (2D-NMs) have gained significant attention in biomedical and pharmaceutical applications due to their precise drug-loading capabilities, controlled release mechanisms, enhanced stability, improved biodegradability, and reduced cell toxicity. Although various studies have explored the diagnostic and therapeutic potential of different nanomaterials in NDDs, there is a lack of comprehensive review addressing the theranostic applications of 2D-NMs in these neuronal disorders. Therefore, this concise review aims to provide a state-of-the-art understanding of the need for these ultrathin 2D-NMs and their potential applications in biosensing and bioimaging, targeted drug delivery, tissue engineering, and regenerative medicine for NDDs.

Boronic Acid-Decorated Carbon Dot-Based Semiselective Multichannel Sensor Array for Cytokine Discrimination and Oral Cancer Diagnosis

Cytokines are essential components of the immune system and are recognized as significant biomarkers. However, detection of a single cytokine is not precise and reliable enough to satisfy the requirements for diagnosis. Herein, we developed a pattern recognition-based method for the multiplexed sensing of cytokines, which involves three-color-emitting boronic acid-decorated carbon dots (BCDs) and arginine-modified titanium carbide (Ti3C2 MXenes) as the sensor array. Initially, the fluorescence signals of the three BCDs were quenched by Ti3C2 MXenes. In the presence of cytokines, the fluorescence intensity of the BCDs was restored or further quenched by different cytokines. The fluorescence response occurs in two steps: first, boronic acid interacts with cis-diol functional groups of cytokines, and second, arginine headgroup selectively interacts with glycans. By exploiting the different competing binding of the BCDs and the cytokines toward Ti3C2 MXenes, seven cytokines and their mixtures can be effectively discriminated at a concentration of 20 ng mL-1. Furthermore, our sensor array demonstrated an excellent performance in classifying human oral cancer saliva samples from healthy individuals with clinically relevant specificity. The noninvasive method offers a rapid approach to cytokine analysis, benefiting early and timely clinical diagnosis and treatment.

Molecular modeling and simulation studies of SELEX-derived high-affinity DNA aptamers to the Ebola virus nucleoprotein

Ebola viral disease (EVD) is a highly infectious and potentially fatal illness with a case fatality rate ranging from 25% to 90%. To effectively control its spread, there is a need for rapid, reliable and lowcost point-of-care (P OC) diagnostic tests. While various EVD diagnostic tests exist, few are P OC tests, and many are not cost-effective. The use of antibodies in these tests has limitations, prompting the exploration of aptamers as potential alternatives. Various proteins from the Ebola virus (EBOV) proteome, including EBOV nucleoprotein (NP), are considered viable targets for diagnostic assays. A previous study identified three aptamers (Apt1. Apt2 and Apt3) with high affinity for EBOV NP using systemic evolution of ligands by exponential enrichment (SELEX). This study aimed to employ in silico methods, such as Phyre2, RNAfold, RNAComposer, HADDOCK and GROMACS, to model the structures of EBOV NP and the aptamers, and to investigate their binding. The in silico analysis revealed successful binding of all the three aptamers to EBOV NP, with a suggested ranking of Apt1 > Apt2 > Apt3 based on binding affinity. Microscale thermophoresis (MST) analysis confirmed the binding, providing dissociation constants of 25 ± 2.84, 56 ± 2.76 and 140 ±3.69 nM for Apt1, Apt2 and Apt3, respectively. The study shows that the findings of the in silico analysis was in agreement with the MST analysis. Inclusion of these in silico approaches in diagnostic assay development can expedite the selection of candidate aptamers, potentially overcoming challenges associated with aptamer application in diagnostics.Communicated by Ramaswamy H. Sarma.

Two-dimensional nanomaterials as enhanced surface plasmon resonance sensing platforms: Design perspectives and illustrative applications

Both increasing demand for ultrasensitive detection in the scientific community and significant new breakthroughs in materials science field have inspired and promoted the development of new-generation multifunctional plasmonic sensing platforms by adopting promising plasmonic nanomaterials. Recently, high-quality surface plasmon resonance (SPR) sensors, assisted by two dimensional (2D) nanomaterials including 2D van der Waals (vdWs) materials (such as graphene/graphene oxide, transition metal dichalcogenides (TMDs), phosphorene, antimonene, tellurene, MXenes, and metal oxides), 2D metal-organic frameworks (MOFs), 2D hyperbolic metamaterials (HMMs), and 2D optical metasurfaces, have emerged as a class of novel plasmonic sensing platforms that show unprecedented detection sensitivity and impressive performance. This review of recent progress in 2D nanomaterials-enhanced SPR platforms will highlight their compelling plasmonic enhancement features, working mechanisms, and design methodologies, as well as discuss illustrative practical applications. Hence, it is of great importance to describe the latest research progress in 2D nanomaterials-enhanced SPR sensing cases. In this review, we present some concepts of SPR enhanced by 2D nanomaterials, including the basic principles of SPR, signal modulation approaches, and working enhancement mechanisms for various 2D materials-enhanced SPR systems. In addition, we also demonstrate a detailed categorization of 2D nanomaterials-enhanced SPR sensing platforms and comment on their ability to realize ultrasensitive SPR detection. Finally, we conclude with future perspectives for exploring a new generation of 2D nanomaterials-based sensors.

Environmental implications of metal-organic frameworks and MXenes in biomedical applications: a perspective

Metal-organic frameworks (MOFs) and MXenes have demonstrated immense potential for biomedical applications, offering a plethora of advantages. MXenes, in particular, exhibit robust mechanical strength, hydrophilicity, large surface areas, significant light absorption potential, and tunable surface terminations, among other remarkable characteristics. Meanwhile, MOFs possess high porosity and large surface area, making them ideal for protecting active biomolecules and serving as carriers for drug delivery, hence their extensive study in the field of biomedicine. However, akin to other (nano)materials, concerns regarding their environmental implications persist. The number of studies investigating the toxicity and biocompatibility of MXenes and MOFs is growing, albeit further systematic research is needed to thoroughly understand their biosafety issues and biological effects prior to clinical trials. The synthesis of MXenes often involves the use of strong acids and high temperatures, which, if not properly managed, can have adverse effects on the environment. Efforts should be made to minimize the release of harmful byproducts and ensure proper waste management during the production process. In addition, it is crucial to assess the potential release of MXenes into the environment during their use in biomedical applications. For the biomedical applications of MOFs, several challenges exist. These include high fabrication costs, poor selectivity, low capacity, the quest for stable and water-resistant MOFs, as well as difficulties in recycling/regeneration and maintaining chemical/thermal/mechanical stability. Thus, careful consideration of the biosafety issues associated with their fabrication and utilization is vital. In addition to the synthesis and manufacturing processes, the ultimate utilization and fate of MOFs and MXenes in biomedical applications must be taken into account. While numerous reviews have been published regarding the biomedical applications of MOFs and MXenes, this perspective aims to shed light on the key environmental implications and biosafety issues, urging researchers to conduct further research in this field. Thus, the crucial aspects of the environmental implications and biosafety of MOFs and MXenes in biomedicine are thoroughly discussed, focusing on the main challenges and outlining future directions.

Portable smartphone platform based on Ti3C2 MQDs/CDs assembly for ratiometric fluorescence quantitative monitoring of crystal violet

Recent years have witnessed ever-increasing achievements using Ti3C2 MXene quantum dots (Ti3C2 MQDs) and their vital contributions to fluorescent biosensing. However, the applicability and flexibility of most Ti3C2 MQD-based sensors are limited by their emission of a single blue wavelength. To address this issue, we present a facile strategy to utilize carbon dots as a model to construct a ratiometric fluorescent sensor based on fluorescence resonance energy transfer to quantitatively monitor crystal violet. The fabricated probe exhibited dual emission at 440 and 565 nm, respectively; when introducing crystal violet, the peak at 565 nm was quenched but that at 440 nm remained constant. Further aiming for portable, convenient, and on-site analysis, an innovative smartphone-assisted platform provides promising prospects for future in situ quantitation. This work creates a general strategy for constructing Ti3C2 MQD-based composite fluorescent systems, as well as suggesting great application potential in food security monitoring.

Two-Dimensional (2D) materials in the detection of SARS-CoV-2

The SARS-CoV-2 pandemic has resulted in a devastating effect on human health in the last three years. While tremendous effort has been devoted to the development of effective treatment and vaccines against SARS-CoV-2 and controlling the spread of it, collective health challenges have been encountered along with the concurrent serious economic impacts. Since the beginning of the pandemic, various detection methods like PCR-based methods, isothermal nucleic acid amplification-based (INAA) methods, serological methods or antibody tests, and evaluation of X-ray chest results have been exploited to diagnose SARS-CoV-2. PCR-based detection methods in these are considered gold standards in the current stage despite their drawbacks, including being high-cost and time-consuming procedures. Furthermore, the results obtained from the PCR tests are susceptible to sample collection methods and time. When the sample is not collected properly, obtaining a false result may be likely. The use of specialized lab equipment and the need for trained people for the experiments pose additional challenges in PCR-based testing methods. Also, similar problems are observed in other molecular and serological methods. Therefore, biosensor technologies are becoming advantageous with their quick response, high specificity and precision, and low-cost characteristics for SARS-CoV-2 detection. In this paper, we critically review the advances in the development of sensors for the detection of SARS-CoV-2 using two-dimensional (2D) materials. Since 2D materials including graphene and graphene-related materials, transition metal carbides, carbonitrides, and nitrides (MXenes), and transition metal dichalcogenides (TMDs) play key roles in the development of novel and high-performance electrochemical (bio)sensors, this review pushes the sensor technologies against SARS-CoV-2 detection forward and highlights the current trends. First, the basics of SARS-CoV-2 detection are described. Then the structure and the physicochemical properties of the 2D materials are explained, which is followed by the development of SARS-CoV-2 sensors by exploiting the exceptional properties of the 2D materials. This critical review covers most of the published papers in detail from the beginning of the outbreak.

Exploring the Synergies of Single-Molecule Fluorescence and 2D Materials Coupled by DNA

The world of 2D materials is steadily growing, with numerous researchers attempting to discover, elucidate, and exploit their properties. Approaches relying on the detection of single fluorescent molecules offer a set of advantages, for instance, high sensitivity and specificity, that allow the drawing of conclusions with unprecedented precision. Herein, it is argued how the study of 2D materials benefits from fluorescence-based single-molecule modalities, and vice versa. A special focus is placed on DNA, serving as a versatile adaptor when anchoring single dye molecules to 2D materials. The existing literature on the fruitful combination of the two fields is reviewed, and an outlook on the additional synergies that can be created between them provided.

Versatile MXene composite probe-mediated homogeneous electrochemiluminescence biosensor with integrated signal transduction and near-infrared modulation strategy for concanavalin A detection

Based on the highly specific interaction between concanavalin A (Con A) and glucose (Glu), a competitive electrochemiluminescence (ECL) biosensor was constructed for ultrasensitive detection of Con A. Nanocomposites with excellent electrocatalytic and photothermal properties were obtained by covalently bonding zinc oxide quantum dots (ZnO QDs) to vanadium carbide MXene (V2C MXene) surfaces. The modification of ZnO QDs hinders the aggregation of V2C MXene and increases the catalytic activity of oxygen reduction reaction, thus amplifying the luminol cathodic emission. In addition, the excellent photothermal performance of the V2C MXene-ZnO QDs can convert light energy into heat energy under the irradiation of 808 nm near infrared laser, thus increasing the temperature of the reaction system and accelerating the electron transfer process to realize the synergistic amplified homogeneous ECL system. This innovative work not only enriches the fundamental research on multifunctional MXene nanomaterials for biosensing, but also provides an effective strategy for ECL signal amplification.

MXenes - Versatile 2D materials for identification of biomarkers and contaminants in large scale environments - A review

Recent years have seen a lot of interest in transition metal carbides/carbonitrides (MXenes), Which is one of newly proliferating two-dimensional (2D) materials.The advantages and applications of synthesizing MXenes-based biosensing systems are interesting. There is an urgent requirement for synthesis of MXenes. Through foliation, physical adsorption, and interface modification,it has been proposed that many biological disorders are related to genetic mutation. Majority of mutations were discovered to be nucleotide mismatches. Consequently, accurate -nucleotide mismatched discrimination is crucial for both diagnosing and treating diseases. To differentiate between such a sensitivealterations in the DNA duplex, several detection methods, particularly Electrochemical-luminescence (ECL) ones, have really been investigated.M_n+1X_nT_x is common name for MXenes, a novel family of two-dimensional (2D) transition metal carbides, nitrides, and carbonitrides, where T stands for interface termination units (i.e. = O, OH, and/or F). These electronic characteristics of MXenes may be changed between conductive to semiconducting due to abundant organometallic chemistry.Solid-state ECL sensors predicated on MXene would provide the facile nucleotide detection and convenience for usage with minimal training, mobility and possibly minimal cost.This study emphasizes upcoming requirements and possibilities in this area while describing the accomplishments achieved in the usage and employing of MXenes in the research and development of facile biomarkerdetection and their significance in designing electrochemical sensors. Opportunities are addressed for creating 2D MXene materials sensors and devices with incorporated biomolecule sensing. MXenes Carry out this process sensors, address the advantages of using MXenes and their variants as detecting materials for gathering different types of data, and attempt to clarify the design principles and operation of related MXene-based sensors, such as nucleotide detection, Single nucleotide detectors, Cancer theranostics, Biosensing capabilities, Gliotoxin detection, SARS-COV-2 nucleocapsid detection, electrochemical sensors, visual sensors, and humidity sensors. Finally, we examine the major issues and prospects for MXene-based materials used in various sensing applications.

Oxidase-like V2C MXene nanozyme with inherent antibacterial properties for colorimetric sensing

The microbial environment greatly affects the performance of colourimetric sensors, especially the interference of bacteria in the sample detected. This paper reports the fabrication of an antibacterial colorimetric sensor based on V₂C MXene synthesized via simple intercalation and stripping. The prepared V₂C nanosheets can mimic oxidase activity towards 3,3',5,5'-tetramethylbenzidine (TMB) oxidation without exogenously adding H₂O₂. Further mechanistic studies showed that V₂C nanosheets could effectively activate the oxygen adsorbed on their surface, which in turn causes an increase in the bond length and a decrease in the magnetic moment of oxygen through electron transfer from the nanosheet surface to O₂. The V₂C nanosheets also exhibited excellent broad-spectrum antibacterial activity through the outbreak of reactive oxygen species. Owing to its unique catalytic activity and the inherent antibacterial ability for mimicking oxidase, a colorimetric sensing platform was developed to effectively determine L-cysteine levels at a detection limit of 30.0 nM (S/N = 3). It is impressive that the detection results of L-cysteine in various complex microbial environments are also very satisfactory. This study broadens the biological use of MXene-based nanomaterials through their satisfactory enzymatic activity and provides a simple and efficient colorimetric strategy for detection techniques used in complex microbial environments.

SERS immuno- and apta-assays in biosensing/bio-detection: Performance comparison, clinical applications, challenges

Surface Enhanced Raman Spectroscopy is increasingly used as a sensitive bioanalytical tool for detection of variety of analytes ranging from viruses and bacteria to cancer biomarkers and toxins, etc. This comprehensive review describes principles of operation and compares the performance of immunoassays and aptamer assays with Surface Enhanced Raman scattering (SERS) detection to each other and to some other bioassay methods, including ELISA and fluorescence assays. Both immuno- and aptamer-based assays are categorized into assay on solid substrates, assays with magnetic nanoparticles and assays in laminar flow or/and strip assays. The best performing and recent examples of assays in each category are described in the text and illustrated in the figures. The average performance, particularly, limit of detection (LOD) for each of those methods reflected in 9 tables of the manuscript and average LODs are calculated and compared. We found out that, on average, there is some advantage in terms of LOD for SERS immunoassays (0.5 pM median LOD of 88 papers) vs SERS aptamer-based assays (1.7 pM median LOD of 51 papers). We also tabulated and analyzed the clinical performance of SERS immune and aptamer assays, where selectivity, specificity, and accuracy are reported, we summarized the best examples. We also reviewed challenges to SERS bioassay performance and real-life application, including non-specific protein binding, nanoparticle aggregation, limited nanotag stability, sometimes, relatively long time to results, etc. The proposed solutions to those challenges are also discussed in the review. Overall, this review may be interesting not only to bioanalytical chemist, but to medical and life science researchers who are interested in improvement of bioanalyte detection and diagnostics.

Enzyme activity termination by titanium carbide nanosheet and its application for the detection of deoxyribonuclease I

Deoxyribonuclease I (DNase I) is a typical nuclease that plays key roles in many physiological processes and the development of a novel biosensing strategy for DNase I detection is of fundamental significance. In this study, a fluorescence biosensing nanoplatform based on a two-dimensional (2D) titanium carbide (Ti₃C₂) nanosheet for sensitive and specific detection of DNase I was reported. Fluorophore-labeled single-stranded DNA (ssDNA) can be spontaneously and selectively adsorbed on Ti₃C₂ nanosheet through the hydrogen bond and metal chelate interaction between phosphate groups of ssDNA and titanium of Ti₃C₂ nanosheet, resulting in effective quenching of the fluorescence emitted by fluorophore. Notably, it was found the enzyme activity of DNase I will be terminated by the Ti₃C₂ nanosheet. Therefore, the fluorophore-labeled ssDNA was firstly digested by DNase I and the "post-mixing" strategy of Ti₃C₂ nanosheet was chosen to evaluate the enzyme activity of DNase I, which provided the possibility of improving the accuracy of the biosensing method. Experimental results demonstrated that this method can be utilized for quantitative analysis of DNase I activity and exhibited a low detection limit of 0.16 U/ml. Additionally, the evaluation of DNase I activity in human serum samples and the screening of inhibitors with this developed biosensing strategy were successfully realized, implying that it has high potential as a promising nanoplatform for nuclease analysis in bioanalytical and biomedical fields.

Surface modification for improving immunoassay sensitivity

Immunoassays are widely performed in many fields such as biomarker discovery, proteomics, drug development, and clinical diagnosis. There is a growing need for high sensitivity of immunoassays to detect low abundance analytes. As a result, great effort has been made to improve the quality of surfaces, on which the immunoassay is performed. In this review article, we summarize the recent progress in surface modification strategies for improving the sensitivity of immunoassays. The surface modification strategies can be categorized into two groups: antifouling coatings to reduce background noise and nanostructured surfaces to amplify the signals. The first part of the review summarizes the common antifouling coating techniques to prevent nonspecific binding and reduce background noise. The techniques include hydrophilic polymer based self-assembled monomers, polymer brushes, and surface attached hydrogels, and omniphobicity based perfluorinated surfaces. In the second part, some common nanostructured surfaces to amplify the specific detection signals are introduced, including nanoparticle functionalized surfaces, two dimensional (2D) nanoarrays, and 2D nanomaterial coatings. The third part discusses the surface modification techniques for digital immunoassays. In the end, the challenges and the future perspectives of the surface modification techniques for immunoassays are presented.

Emerging Trends and Recent Progress of MXene as a Promising 2D Material for Point of Care (POC) Diagnostics

Two-dimensional (2D) nanomaterials with chemical and structural diversity have piqued the interest of the scientific community due to their superior photonic, mechanical, electrical, magnetic, and catalytic capabilities that distinguish them from their bulk counterparts. Among these 2D materials, two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides with a general chemical formula of M_n+1X_nT_x (where n = 1-3), together known as MXenes, have gained tremendous popularity and demonstrated competitive performance in biosensing applications. In this review, we focus on the cutting-edge advances in MXene-related biomaterials, with a systematic summary on their design, synthesis, surface engineering approaches, unique properties, and biological properties. We particularly emphasize the property-activity-effect relationship of MXenes at the nano-bio interface. We also discuss the recent trends in the application of MXenes in accelerating the performance of conventional point of care (POC) devices towards more practical approaches as the next generation of POC tools. Finally, we explore in depth the existing problems, challenges, and potential for future improvement of MXene-based materials for POC testing, with the goal of facilitating their early realization of biological applications.

Recent advances in 2D metal carbides and nitrides (MXenes): synthesis and biological application

As a new two-dimensional (2D) material, transition metal carbides and nitrides (MXenes) have attracted much attention because of their excellent physical and chemical properties. In recent years, MXenes have been widely applied in the biological field due to their high biocompatibility, abundant surface groups, good conductivity, and photothermal properties. Here, the main synthesis methods of MXenes and the analysis of the advantages and disadvantages of each method are presented in detail. Then, the latest developments of MXenes in the biological field, including biosensing, antibacterial activity, reactive oxygen species (ROS) and free radical scavenging, tissue repair and antitumor therapy are comprehensively reviewed. Finally, the current challenges and future development trends of MXenes in biological applications are discussed.

2D MXene-Based Biosensing: A Review

MXene emerged as decent 2D material and has been exploited for numerous applications in the last decade. The remunerations of the ideal metallic conductivity, optical absorbance, mechanical stability, higher heterogeneous electron transfer rate, and good redox capability have made MXene a potential candidate for biosensing applications. The hydrophilic nature, biocompatibility, antifouling, and anti-toxicity properties have opened avenues for MXene to perform in vitro and in vivo analysis. In this review, the concept, operating principle, detailed mechanism, and characteristic properties are comprehensively assessed and compiled along with breakthroughs in MXene fabrication and conjugation strategies for the development of unique electrochemical and optical biosensors. Further, the current challenges are summarized and suggested future aspects. This review article is believed to shed some light on the development of MXene for biosensing and will open new opportunities for the future advanced translational application of MXene bioassays.

Reduced graphene oxide supported MXene based metal oxide ternary composite electrodes for non-enzymatic glucose sensor applications

Diagnosis and monitoring of glucose level in human blood has become a prime necessity to avoid health risk and to cater this, a sensor's performance with wide linearity range and high sensitivity is required. This work reports the use of ternary composite viz. MG-Cu₂O (rGO supported MXene sheet with Cu₂O) for non-enzymatic sensing of glucose. It has been prepared by co-precipitation method and characterized with X-ray powder diffraction, Ultraviolet-visible absorption spectroscopy (UV-Vis), Raman spectroscopy, Field emission scanning electron microscopy, High resolution transmission electron microscopy and Selected area diffraction. These analyses show a cubic structure with spherical shaped Cu₂O grown on the MG sheet. Further, the electrocatalytic activity was carried out with MG-Cu₂O sensing element by cyclic voltammetry and chronoamperometry technique and compared with M-Cu₂O (MXene with Cu₂O) composite without graphene oxide. Of these, MG-Cu₂O composite was having the high defect density with lower crystalline size of Cu₂O, which might enhance the conductivity thereby increasing the electrocatalytic activity towards the oxidation of glucose as compared to M-Cu₂O. The prepared MG-Cu₂O composite shows a sensitivity of 126.6 µAmM^-1 cm^-2 with a wide linear range of 0.01to 30 mM, good selectivity, good stability over 30 days and shows a low Relative Standard Deviation (RSD) of 1.7% value towards the sensing of glucose level in human serum. Thus, the aforementioned finding indicates that the prepared sensing electrode is a well suitable candidate for the sensing of glucose level for real time applications.

Introduction of graphene oxide-supported multilayer-quantum dots nanofilm into multiplex lateral flow immunoassay: A rapid and ultrasensitive point-of-care testing technique for multiple respiratory viruses

A lateral flow immunoassay (LFA) biosensor that allows the sensitive and accurate identification of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and other common respiratory viruses remains highly desired in the face of the coronavirus disease 2019 pandemic. Here, we propose a multiplex LFA method for the on-site, rapid, and highly sensitive screening of multiple respiratory viruses, using a multilayered film-like fluorescent tag as the performance enhancement and signal amplification tool. This film-like three-dimensional (3D) tag was prepared through the layer-by-layer assembly of highly photostable CdSe@ZnS-COOH quantum dots (QDs) onto the surfaces of monolayer graphene oxide nanosheets, which can provide larger reaction interfaces and specific active surface areas, higher QD loads, and better luminescence and dispersibility than traditional spherical fluorescent microspheres for LFA applications. The constructed fluorescent LFA biosensor can simultaneously and sensitively quantify SARS-CoV-2, influenza A virus, and human adenovirus with low detection limits (8 pg/mL, 488 copies/mL, and 471 copies/mL), short assay time (15 min), good reproducibility, and high accuracy. Moreover, our proposed assay has great potential for the early diagnosis of respiratory virus infections given its robustness when validated in real saliva samples.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (Section S1 Experimental section, Section S2 Calculation of the maximum number of QDs on the GO@TQD nanofilm, Section S3 Optimization of the LFA method, and Figs. S1-S17 mentioned in the main text) is available in the online version of this article at 10.1007/s12274-022-5043-6.

New Horizons for MXenes in Biosensing Applications

Over the last few decades, biosensors have made significant advances in detecting non-invasive biomarkers of disease-related body fluid substances with high sensitivity, high accuracy, low cost and ease in operation. Among various two-dimensional (2D) materials, MXenes have attracted widespread interest due to their unique surface properties, as well as mechanical, optical, electrical and biocompatible properties, and have been applied in various fields, particularly in the preparation of biosensors, which play a critical role. Here, we systematically introduce the application of MXenes in electrochemical, optical and other bioanalytical methods in recent years. Finally, we summarise and discuss problems in the field of biosensing and possible future directions of MXenes. We hope to provide an outlook on MXenes applications in biosensing and to stimulate broader interests and research in MXenes across different disciplines.

Colorimetric determination of biothiols based on peroxidase-mimicking Ag nanoparticles decorated Ti3C2 nanosheets

Ag nanoparticle-decorated Ti₃C₂ nanosheets (AgNPs@Ti₃C₂ NSs) were facilely synthesized via a self-reduction approach, in which Ti₃C₂ NSs acted as both reductant and supporter. The AgNPs@Ti₃C₂ NS nanocomposite exhibited excellent peroxidase-like activity with o-phenylenediamine (OPD) and H₂O₂ as substrates. The catalytic behavior followed the typical Michaelis-Menten kinetics; Michaelis constant (K_m) and maximum initial velocity (V_max) for OPD were 0.263 mM and 43.2 × 10^-8 M^-1 s, indicating high affinity and high catalytic efficiency towards OPD. The catalytic mechanism was revealed to be an accelerated electron transfer process. Based on the inhibition effect on the peroxidase-like activity of AgNPs@Ti₃C₂ NSs, a simple, fast, and sensitive colorimetric method for detection of low-weight biothiols (cysteine (Cys), homocysteine (Hcy), and glutathione (GSH)) was developed by measuring the absorbance at 425 nm. The colorimetric method displayed wide linear range (50 nM to 50 μM for Cys, 10 nM to 250 μM for Hcy, 10 nM to 50 μM for GSH), low limit of detection (48.5 nM for Cys, 5.5 nM for Hcy, 7.0 nM for GSH), and good selectivity and short assay time (3 min). Moreover, the feasibility of this colorimetric sensor was demonstrated by accurately determining Cys in diluted human serum samples; good recovery (95.9-101.0%) and low relative standard deviations (2.8-4.9%) were obtained, showing great promise for point-of-care test in clinical samples.

An ultrasensitive sandwich-type electrochemical aptasensor using silver nanoparticle/titanium carbide nanocomposites for the determination of Staphylococcus aureus in milk

A novel sandwich-type electrochemical aptasensor for the detection of Staphylococcus aureus (S. aureus) was developed. S. aureus aptamers were self-assembled onto the surface of a glassy carbon electrode (GCE) modified with nanocomposites comprising titanium carbide embedded with silver nanoparticles (AgNPs@Ti₃C₂) through hydrogen bonds and the chelation interaction between phosphate groups and Ti ions. In addition, the self-assembled aptamers were immobilized on CuO/graphene (GR) nanocomposites via π-π stacking interactions to serve as a signal probe. In the presence of the target S. aureus, the sandwich-type recognition system reacted on the surface of GCE, and the CuO/GR nanocomposites catalyzed the hydrogen peroxide + hydroquinone reaction producing a strong current response. Under the optimal experimental conditions, the current response of the aptasensor was linearly correlated with the concentration of S. aureus (52-5.2 × 10⁷ CFU mL^-1) with a low detection limit of 1 CFU mL^-1. The aptasensor displayed good repeatability and excellent selectivity for S. aureus detection. Moreover, this aptasensor was applied to the detection of S. aureus in cow, sheep, and goat milk samples, affording recoveries ranging from 92.64 to 109.58%. This research provides a new platform for the detection of pathogenic bacteria and other toxic and harmful substances in food.

New Trends in Nanoarchitectured SERS Substrates: Nanospaces, 2D Materials, and Organic Heterostructures

This article reviews recent fabrication methods for surface-enhanced Raman spectroscopy (SERS) substrates with a focus on advanced nanoarchitecture based on noble metals with special nanospaces (round tips, gaps, and porous spaces), nanolayered 2D materials, including hybridization with metallic nanostructures (NSs), and the contemporary repertoire of nanoarchitecturing with organic molecules. The use of SERS for multidisciplinary applications has been extensively investigated because the considerably enhanced signal intensity enables the detection of a very small number of molecules with molecular fingerprints. Nanoarchitecture strategies for the design of new NSs play a vital role in developing SERS substrates. In this review, recent achievements with respect to the special morphology of metallic NSs are discussed, and future directions are outlined for the development of available NSs with reproducible preparation and well-controlled nanoarchitecture. Nanolayered 2D materials are proposed for SERS applications as an alternative to the noble metals. The modern solutions to existing limitations for their applications are described together with the state-of-the-art in bio/environmental SERS sensing using 2D materials-based composites. To complement the existing toolbox of plasmonic inorganic NSs, hybridization with organic molecules is proposed to improve the stability of NSs and selectivity of SERS sensing by hybridizing with small or large organic molecules.

Engineered 2D materials for optical bioimaging and path toward therapy and tissue engineering

Two-dimensional (2D) layered materials as a new class of nanomaterial are characterized by a list of exotic properties. These layered materials are investigated widely in several biomedical applications. A comprehensive understanding of the state-of-the-art developments of 2D materials designed for multiple nanoplatforms will aid researchers in various fields to broaden the scope of biomedical applications. Here, we review the advances in 2D material-based biomedical applications. First, we introduce the classification and properties of 2D materials. Next, we summarize surface and structural engineering methods of 2D materials where we discuss surface functionalization, defect, and strain engineering, and creating heterostructures based on layered materials for biomedical applications. After that, we discuss different biomedical applications. Then, we briefly introduced the emerging role of machine learning (ML) as a technological advancement to boost biomedical platforms. Finally, the current challenges, opportunities, and prospects on 2D materials in biomedical applications are discussed.

Graphical abstract

Ti3C2 MXene-anchored photoelectrochemical detection of exosomes by in situ fabrication of CdS nanoparticles with enzyme-assisted hybridization chain reaction

Exosomes that carry large amounts of tumor-specific molecular information have been identified as a potential non-invasive biomarker for early warning of cancer. In this work, we reported an enzyme-assisted photoelectrochemical (PEC) biosensor for quantification of exosomes based on the in situ synthesis of Ti₃C₂ MXene/CdS composites with magnetic separation technology and hybridization chain reaction (HCR). First, exosomes were specifically bound between aptamer-labeled magnetic beads (CD63-MBs) and a cholesterol-labeled DNA anchor. The properly designed anchor ends acted as a trigger to enrich the alkaline phosphatase (ALP) through HCR. It catalyzed more sodium thiophosphate to generate the sulfideion (S²⁻), which combined with Cd²⁺ for in situ fabrication of CdS on Ti₃C₂ MXene resulting in elevated photocurrent. The Ti₃C₂ MXene-anchored PEC method was realized for the quantitative detection of exosomes, which exhibited the dynamic working range from 7.3 × 10⁵ particles per mL to 3.285 × 10⁸ particles per mL with a limit of detection of 7.875 × 10⁴ particles per mL. The strategy showed acceptable stability, high sensitivity, rapid response and excellent selectivity. Furthermore, we believe that the PEC biosensor has huge potential as a routine bioassay method for the precise quantification of exosomes from breast cancer in the future.

An enzyme-assisted photoelectrochemical (PEC) biosensor was established for quantification of exosomes based on the in situ synthesis of Ti₃C₂ MXene/CdS composites with magnetic separation technology and hybridization chain reaction (HCR).

Two-dimensional metal-organic frameworks: from synthesis to bioapplications

As a typical class of crystalline porous materials, metal-organic framework possesses unique features including versatile functionality, structural and compositional tunability. After being reduced to two-dimension, ultrathin metal-organic framework layers possess more external excellent properties favoring various technological applications. In this review article, the unique structural properties of the ultrathin metal-organic framework nanosheets benefiting from the planar topography were highlighted, involving light transmittance, and electrical conductivity. Moreover, the design strategy and versatile fabrication methodology were summarized covering discussions on their applicability and accessibility, especially for porphyritic metal-organic framework nanosheet. The current achievements in the bioapplications of two-dimensional metal-organic frameworks were presented comprising biocatalysis, biosensor, and theranostic, with an emphasis on reactive oxygen species-based nanomedicine for oncology treatment. Furthermore, current challenges confronting the utilization of two-dimensional metal-organic frameworks and future opportunities in emerging research frontiers were presented.

Two-Dimensional Quantum Dot-Based Electrochemical Biosensors

Two-dimensional quantum dots (2D-QDs) derived from two-dimensional sheets have received increasing interest owing to their unique properties, such as large specific surface areas, abundant active sites, good aqueous dispersibility, excellent electrical property, easy functionalization, and so on. A variety of 2D-QDs have been developed based on different materials including graphene, black phosphorus, nitrides, transition metal dichalcogenides, transition metal oxides, and MXenes. These 2D-QDs share some common features due to the quantum confinement effects and they also possess unique properties owing to their structural differences. In this review, we discuss the categories, properties, and synthetic routes of these 2D-QDs and emphasize their applications in electrochemical biosensors. We deeply hope that this review not only stimulates more interest in 2D-QDs, but also promotes further development and applications of 2D-QDs in various research fields.

MXene-based electrochemical sensors for detection of environmental pollutants: A comprehensive review

Since the discovery of MXenes at Drexel University in the United States in 2011, there has been extensive research regarding various applications of MXenes including environmental remediation. MXenes with a general formula of M_n+1X_nT_x are a class of two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides with unique chemical and physical characteristics as nanomaterials. MXenes feature characteristics such as high conductivity, hydrophobicity, and large specific surface areas that are attracting attention from researchers in many fields including environmental water engineering such as desalination and wastewater treatment as well as designing and building efficient sensors to detect hazardous pollutants in water. In this study, we review recent developments in MXene-based nanocomposites for electrochemical (bio) sensing with a particular focus on the detection of hazardous pollutants, such as organic components, pesticides, nitrite, and heavy metals. Integration of these 2D materials in electrochemical enzyme-based and affinity-based biosensors for environmental pollutants is also discussed. In addition, a summary of the key challenges and future remarks are presented. Although this field is relatively new, future research on biosensors of MXene-based nanocomposites need to exploit the remarkable properties of these 2D materials.

Highly accurate and label-free discrimination of single cancer cell using a plasmonic oxide-based nanoprobe

The detection of cancer cells at the single-cell level enables many novel functionalities such as next-generation cancer prognosis and accurate cellular analysis. While surface-enhanced Raman spectroscopy (SERS) has been widely considered as an effective tool in a low-cost and label-free manner, however, it is challenging to discriminate single cancer cells with an accuracy above 90% mainly due to the poor biocompatibility of the noble-metal-based SERS agents. Here, we report a dual-functional nanoprobe based on dopant-driven plasmonic oxides, demonstrating a maximum accuracy above 90% in distinguishing single THP-1 cell from peripheral blood mononuclear cell (PBMC) and human embryonic kidney (HEK) 293 from human macrophage cell line U937 based on their SERS patterns. Furthermore, this nanoprobe can be triggered by the bio-redox response from individual cells towards stimuli, empowering another complementary colorimetric cell detection, approximately achieving the unity discrimination accuracy at a single-cell level. Our strategy could potentially enable the future accurate and low-cost detection of cancer cells from mixed cell samples.

Sensitive electrochemiluminescence biosensing of polynucleotide kinase using the versatility of two-dimensional Ti3C2TX MXene nanomaterials

Electrochemiluminescence (ECL) is a powerful readout method for the development of (bio)sensors, whose performances depend on the electrode materials and the architecture of its surface. Herein, we demonstrate that the precise control of the sensing interface using the versatility of two-dimensional (2D) transition metal carbides (Ti₃C₂T_X MXene) leads to the enhancement of the ECL signal. This electrode material, which exhibits remarkable structural and electrochemical properties was decorated by the in situ formation of gold nanoparticles (AuNPs) owing to the Ti reducibility. Then, a large amount of the luminophore, Ru(bpy)₃²⁺, was immobilized on Ti₃C₂T_X MXene thanks to its unique negative charge and large specific surface area to obtain Ru-Ti₃C₂T_X-AuNPs. The presented approach exploits the high catalytic activity and excellent conductivity of this 2D nanomaterial as illustrated by the enhanced ECL emission performance of the Ru-Ti₃C₂T_X-AuNPs nanoprobes. Finally, DNA phosphorylated with polynucleotide kinase (PNK) was recognized efficiently by the chelation between Ti and phosphate group. A highly sensitive and selective ECL biosensor was developed for the detection of PNK and the screening of its inhibitors. A lower detection limit of 0.0002 U mL^-1 and wide linear relationship ranged from 0.002 to 10 U mL^-1 were obtained. Furthermore, the practicality of our method was tested in MCF-7 cell lysate, which opens enticing perspectives for future applications of Ti₃C₂T_X materials in the ECL bioanalysis field.

Emerging roles of the aptasensors as superior bioaffinity sensors for monitoring shellfish toxins in marine food chain

Shellfish toxins are derived from harmful algae and are easily accumulated in environment and marine food through the food chain, exposing high risks on human health. Preliminary rapid screening is one of the most effective monitoring ways to reduce the potential risks; however, the traditional methods encounter with many limitations, such as complicated procedures, low sensitivity and specificity, and ethical problems. Alternatively, bioaffinity sensors are proposed and draw particular attention. Among them, the aptasensors are springing up and emerging as superior alternatives in recent years, exhibiting high practicability to analyze shellfish toxins in real samples in the marine food chain. Herein, the latest research progresses of aptasensors towards shellfish toxins in the marine food chain in the past five years was reviewed for the first time, in terms of the aptamers applied in these aptasensors, construction principles, signal transduction techniques, response types, individual performance properties, practical applications, and advantages/disadvantages of these aptasensors. Synchronously, critical discussions were given and future perspectives were prospected. We hope this review can serve as a powerful reference to promote further development and application of aptasensors to monitor shellfish toxins, as well as other analytes with similar demands.

Two-dimensional material-based virus detection

Cost-effective, rapid, and accurate virus detection technologies play key roles in reducing viral transmission. Prompt and accurate virus detection enables timely treatment and effective quarantine of virus carrier, and therefore effectively reduces the possibility of large-scale spread. However, conventional virus detection techniques often suffer from slow response, high cost or sophisticated procedures. Recently, two-dimensional (2D) materials have been used as promising sensing platforms for the high-performance detection of a variety of chemical and biological substances. The unique properties of 2D materials, such as large specific area, active surface interaction with biomolecules and facile surface functionalization, provide advantages in developing novel virus detection technologies with fast response and high sensitivity. Furthermore, 2D materials possess versatile and tunable electronic, electrochemical and optical properties, making them ideal platforms to demonstrate conceptual sensing techniques and explore complex sensing mechanisms in next-generation biosensors. In this review, we first briefly summarize the virus detection techniques with an emphasis on the current efforts in fighting again COVID-19. Then, we introduce the preparation methods and properties of 2D materials utilized in biosensors, including graphene, transition metal dichalcogenides (TMDs) and other 2D materials. Furthermore, we discuss the working principles of various virus detection technologies based on emerging 2D materials, such as field-effect transistor-based virus detection, electrochemical virus detection, optical virus detection and other virus detection techniques. Then, we elaborate on the essential works in 2D material-based high-performance virus detection. Finally, our perspective on the challenges and future research direction in this field is discussed.

Recent advances in flexible and wearable chemo- and bio-sensors based on two-dimensional transition metal carbides and nitrides (MXenes)

Due to their excellent hydrophilicity, outstanding conductivity, unique structures, and physicochemical properties, MXenes have become a potential candidate material for flexible and wearable chemo- and bio-sensors.

Electrochemical and optical biosensors based on multifunctional MXene nanoplatforms: Progress and prospects

Two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides (MXene) have emerged as a rising family of atomic layered nanomaterials which undergoes intensive investigations in interdisciplinary applications. The large surface-to-volume ratio, excellent mechanical strength, desirable biocompatibility, along with tunable electronic and optical properties, render 2D MXenes exceptional attractive as versatile nanoplatforms for biosensing. Herein, advanced progress and novel paradigms of MXene-based biosensors are reviewed, focusing on the combination of MXenes with various detection techniques that promotes target recognition and signal transducing. Regarding the nature of transducing signals, MXene-based biosensors are categorized into two groups where MXenes serve as electrical platforms or optical platforms, respectively. The merits of MXenes are critically compared with other 2D materials to illustrate the distinctive advantages of MXenes in biosensing, while challenges such as environmental vulnerability was discussed to guide the sensor design. Facing with the rapid development of wearable electronics and internet of medical things, as well as escalating demanding in precision medicine, perspectives are provided to elucidate the potential of MXenes in propelling advances in these trending biomedical applications.

Metal-Organic-Framework- and MXene-Based Taste Sensors and Glucose Detection

Taste sensors can identify various tastes, including saltiness, bitterness, sweetness, sourness, and umami, and have been useful in the food and beverage industry. Metal-organic frameworks (MOFs) and MXenes have recently received considerable attention for the fabrication of high-performance biosensors owing to their large surface area, high ion transfer ability, adjustable chemical structure. Notably, MOFs with large surface areas, tunable chemical structures, and high stability have been explored in various applications, whereas MXenes with good conductivity, excellent ion-transport characteristics, and ease of modification have exhibited great potential in biochemical sensing. This review first outlines the importance of taste sensors, their operation mechanism, and measuring methods in sensing utilization. Then, recent studies focusing on MOFs and MXenes for the detection of different tastes are discussed. Finally, future directions for biomimetic tongues based on MOFs and MXenes are discussed.