Plasmon color-preserved gold nanoparticle clusters for high sensitivity detection of SARS-CoV-2 based on lateral flow immunoassay

Plasmonic-Enhanced Colorimetric Lateral Flow Immunoassays Using Bimetallic Silver-Coated Gold Nanostars

The colorimetric lateral flow immunoassay (cLFIA) has gained widespread attention as a point-of-care testing (POCT) technique due to its low cost, short analysis time, portability, and capability of being performed by unskilled operators with minimal requirement of reagents. However, the low analytical sensitivity of conventional LFIA based on colloidal gold nanospheres limits their applications for sensitive detection of trace amounts of target analytes. In this study, we introduced a novel plasmonic-enhanced colorimetric LFIA (PE-cLFIA) platform featuring bimetallic silver-coated gold nanostars (BGNS) with exceptional optical properties, leading to ultrahigh visual color brightness. The BGNS-based PE-cLFIA was successfully applied to detect a model analyte, low-calcium response V (LcrV), a virulence protein factor found in Yersinia pestis, the causative agent of bubonic plague. The PE-cLFIA sensing using BGNS-3 composed of 45 nm silver thickness showed a high visual colorimetric sensitivity with a detection limit as low as 13.7 pg/mL, which was around 50 times more sensitive than that of a traditional gold nanoparticle-based LFIA. In addition, the antibody-conjugated BGNS-3 showed excellent stability over 6 months. To illustrate the potential for clinical applications, we demonstrated that our LFIA platform for detecting LcrV spiked in human serum without any sample preprocessing exhibited a detection limit of 22.8 pg/mL. These results open up new opportunities for developing hybrid nanoparticle systems for sensitive POCT PE-cLFIA screening for infectious disease detection.

CRISPR/Cas12a coupled with loop-mediated isothermal amplification and lateral flow assay for SARS-CoV-2 detection

Point-of-care testing (POCT) is rapid, exhibits highly sensitive performance, can facilitate home self-testing and avoids cross-contamination. Herein, we developed a biosensor that combines Si-OH magnetic bead (MB)-based fast RNA extraction, reverse transcription-loop-mediated isothermal amplification (RT-LAMP), CRISPR-Cas12a, and lateral flow assay (LFA) for rapid detection of SARS-CoV-2 RNA within 1.5 h. In the presence of the SARS-CoV-2 LAMP amplicon, the trans-cleavage activity of Cas12a was activated to cleave the probe, separating streptavidin from the AuNPs-digoxin (Dig) antibody, resulting in the inability of the test line to capture the AuNPs-Dig antibody. The method can distinguish SARS-CoV-2 from other RNA viruses, with a limit-of-detection (LOD) of 6.2 × 102 copies per mL. Therefore, LAMP-CRISPR-LFA has high specificity and sensitivity and is convenient to develop into commercial assay kits, which could have a broad prospect for practical application.

Plasmonic nanoparticle sensors: current progress, challenges, and future prospects

Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches.

Nanomaterials in Immunology: Bridging Innovative Approaches in Immune Modulation, Diagnostics, and Therapy

The intersection of immunology and nanotechnology has provided significant advancements in biomedical research and clinical applications over the years. Immunology aims to understand the immune system's defense mechanisms against pathogens. Nanotechnology has demonstrated its potential to manipulate immune responses, as nanomaterials' properties can be modified for the desired application. Research has shown that nanomaterials can be applied in diagnostics, therapy, and vaccine development. In diagnostics, nanomaterials can be used for biosensor development, accurately detecting biomarkers even at very low concentrations. Therapeutically, nanomaterials can act as efficient carriers for delivering drugs, antigens, or genetic material directly to targeted cells or tissues. This targeted delivery improves therapeutic efficacy and reduces the adverse effects on healthy cells and tissues. In vaccine development, nanoparticles can improve vaccine durability and extend immune responses by effectively delivering adjuvants and antigens to immune cells. Despite these advancements, challenges regarding the safety, biocompatibility, and scalability of nanomaterials for clinical applications are still present. This review will cover the fundamental interactions between nanomaterials and the immune system, their potential applications in immunology, and their safety and biocompatibility concerns.

Unravelling the diagnostic methodologies for SARS-CoV-2; the Indispensable need for developing point-of-care testing

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)-caused COVID-19 pandemic that continues to be a global menace and since its emergence in the late 2019, SARS-CoV-2 has been vigorously spreading throughout the globe putting the whole world into a multidimensional calamity. The suitable diagnosis strategies are on the front line of the battle against preventing the spread of infections. Since the clinical manifestation of COVID-19 is shared between various diseases, detection of the unique impacts of the pathogen on the host along with the diagnosis of the virus itself should be addressed. Employing the most suitable approaches to specifically, sensitively and effectively recognize the infected cases may be a real game changer in controlling the outbreak and the crisis management. In that matter, point-of-care assays (POC) appears to be the potential option, due to sensitivity, specificity, affordable, and availability. Here we brief the most recent findings about the virus, its variants, and the conventional methods that have been used for its detection, along with the POC strategies that have been applied to the virus diagnosis and the developing technologies which can accelerate the diagnosis procedure yet maintain its efficiency.

"Four-In-One" Multifunctional Dandelion-Like Gold@platinum Nanoparticles-Driven Multimodal Lateral Flow Immunoassay

The traditional lateral flow immunoassay (LFIA) with a single signal output mode may encounter challenges such as low sensitivity, poor detection range, and susceptibility to external interferences. These limitations hinder its ability to meet the growing demand for advanced LFIA. To address these issues, the rational development of multifunctional labels for multimodal LFIA emerges as a promising strategy. Herein, this study reports a multimodal LFIA using "four-in-one" multifunctional dandelion-like gold@platinum nanoparticles (MDGP). The inherent properties of MDGP, such as the broad absorption spectrum, porous dandelion-like nanostructure, and bimetallic composition with gold and platinum, endow them with capacities in dual spectral-overlapped fluorescence quenching, optical readout, catalytic activity, and photothermal effect. Benefiting from their multifunctional properties, the MDGP-LFIA enables multimodal outputs including fluorescent, colorimetric, and photothermal signals. This multimodal MDGP-LFIA allows for the detection of acetamiprid at a range of 0.01-50 ng mL-1, with the lowest qualitative and quantitative detection results of 0.5 and 0.008 ng mL-1, respectively, significantly better than the traditional gold nanoparticles-based LFIA. The diversity, complementarity, and synergistic effect of integrated output signals in this multimodal MDGP-LFIA improve the flexibility, practicability, and accuracy of detection, holding great promise as a point-of-care testing platform in versatile application scenarios.

A highly sensitive and selective colorimetric aptasensor for detecting sulfadiazine in river waters based on gold nanoparticles synthesized from discarded Longan seed extract

Gold nanoparticles (AuNPs) were extensively employed for in-situ detection sulfadiazine (SDZ) residues, yet current synthesis methods suffer from complex procedures, reagent pollution of the environment, and low particle quality. This study presents a novel synthesis method using discarded longan seed extract as a reducing agent to synthesized high-quality AuNPs, and then can be used for in-situ SDZ detection. Response surface methodology (RSM) was employed to optimize synthesis parameters, which resulted in five optimal combinations that enhanced the flexibility of synthesis. These AuNPs, ranging in size from 18.26 nm to 33.8 nm with zeta potentials from - 29.5 mV to - 14.3 mV, were successfully loaded with functional groups from longan seed extract. In the detection of SDZ, the colorimetric aptasensor demonstrated excellent sensitivity and selectivity over other antibiotics with a limit of detection and quantification at 70.98 ng·mL-1 and 236.59 ng·mL-1 in the concentration range of 200-800 ng·mL-1. Recoveries of spiked SDZ samples ranged from 97.90% to 106.7%, with RSD values below 9.25%. Meanwhile, the aptasensor exhibited exceptional diagnostic efficacy (AUC: 0.976) compared to UV absorption methods in the ROC evaluation. In conclusion, this study highlights the potential of using AuNPs synthesized from longan seed extract coupled with aptamer technology as a straightforward detection method for SDZ in river water, offering promising applications in environmental monitoring.

Deep-learning assisted zwitterionic magnetic immunochromatographic assays for multiplex diagnosis of biomarkers

Magnetic nanoparticle (MNP)-based immunochromatographic tests (ICTs) display long-term stability and an enhanced capability for multiplex biomarker detection, surpassing conventional gold nanoparticles (AuNPs) and fluorescence-based ICTs. In this study, we innovatively developed zwitterionic silica-coated MNPs (MNP@Si-Zwit/COOH) with outstanding antifouling capabilities and effectively utilised them for the simultaneous identification of the nucleocapsid protein (N protein) of the severe acute respiratory syndrome coronavirus (SARS-CoV-2) and influenza A/B. The carboxyl-functionalised MNPs with 10% zwitterionic ligands (MNP@Si-Zwit 10/COOH) exhibited a wide linear dynamic detection range and the most pronounced signal-to-noise ratio when used as probes in the ICT. The relative limit of detection (LOD) values were achieved in 12 min by using a magnetic assay reader (MAR), with values of 0.0062 ng/mL for SARS-CoV-2 and 0.0051 and 0.0147 ng/mL, respectively, for the N protein of influenza A and influenza B. By integrating computer vision and deep learning to enhance the image processing of immunoassay results for multiplex detection, a classification accuracy in the range of 0.9672-0.9936 was achieved for evaluating the three proteins at concentrations of 0, 0.1, 1, and 10 ng/mL. The proposed MNP-based ICT for the multiplex diagnosis of biomarkers holds substantial promise for applications in both medical institutions and self-administered diagnostic settings.

Colorimetric and Photothermal Dual-Modal Switching Lateral Flow Immunoassay Based on a Forced Dispersion Prussian Blue Nanocomposite for the Sensitive Detection of Prostate-Specific Antigen

Prostate-specific antigen (PSA) is a key marker for a prostate cancer diagnosis. The low sensitivity of traditional lateral flow immunoassay (LFIA) methods makes them unsuitable for point-of-care testing. Herein, we designed a nanozyme by in situ growth of Prussian blue (PB) within the pores of dendritic mesoporous silica (DMSN). The PB was forcibly dispersed into the pores of DMSN, leading to an increase in exposed active sites. Consequently, the atom utilization is enhanced, resulting in superior peroxidase (POD)-like activity compared to that of cubic PB. Antibody-modified DMSN@PB nanozymes serve as immunological probes in an enzymatic-enhanced colorimetric and photothermal dual-signal LFIA for PSA detection. After systematic optimization, the LFIA based on DMSN@PB successfully achieves a 4-fold amplification of the colorimetric signal within 7 min through catalytic oxidation of the chromogenic substrate by POD-like activity. Moreover, DMSN@PB exhibits an excellent photothermal conversion ability under 808 nm laser irradiation. Accordingly, photothermal signals are introduced to improve the anti-interference ability and sensitivity of LFIA, exhibiting a wide linear range (1-40 ng mL-1) and a low PSA detection limit (0.202 ng mL-1), which satisfies the early detection level of prostate cancer. This research provides a more accurate and reliable visualization analysis methodology for the early diagnosis of prostate cancer.

Development of Detection Antibody Targeting the Linear Epitope in SARS-CoV-2 Nucleocapsid Protein with Ultra-High Sensitivity

The COVID-19 pandemic caused by SARS-CoV-2 highlighted the importance of reliable detection methods for disease control and surveillance. Optimizing detection antibodies by rational screening antigens would improve the sensitivity and specificity of antibody-based detection methods such as colloidal gold immunochromatography. In this study, we screened three peptide antigens with conserved sequences in the N protein of SARS-CoV-2 using bioinformatical and structural biological analyses. Antibodies that specifically recognize these peptides were prepared. The epitope of the peptide that had the highest binding affinity with its antibody was located on the surface of the N protein, which was favorable for antibody binding. Using the optimal antibody that can recognize this epitope, we developed colloidal gold immunochromatography, which can detect the N protein at 10 pg/mL. Importantly, this antibody could effectively recognize both the natural peptide antigen and mutated peptide antigen in the N protein, showing the feasibility of being applied in the large-scale population testing of SARS-CoV-2. Our study provides a platform with reference significance for the rational screening of detection antibodies with high sensitivity, specificity, and reliability for SARS-CoV-2 and other pathogens.

Recent Advances in Lateral Flow Assays for Viral Protein Detection with Nanomaterial-Based Optical Sensors

Controlling the progression of contagious diseases is crucial for public health management, emphasizing the importance of early viral infection diagnosis. In response, lateral flow assays (LFAs) have been successfully utilized in point-of-care (POC) testing, emerging as a viable alternative to more traditional diagnostic methods. Recent advancements in virus detection have primarily leveraged methods such as reverse transcription-polymerase chain reaction (RT-PCR), reverse transcription-loop-mediated isothermal amplification (RT-LAMP), and the enzyme-linked immunosorbent assay (ELISA). Despite their proven effectiveness, these conventional techniques are often expensive, require specialized expertise, and consume a significant amount of time. In contrast, LFAs utilize nanomaterial-based optical sensing technologies, including colorimetric, fluorescence, and surface-enhanced Raman scattering (SERS), offering quick, straightforward analyses with minimal training and infrastructure requirements for detecting viral proteins in biological samples. This review describes the composition and mechanism of and recent advancements in LFAs for viral protein detection, categorizing them into colorimetric, fluorescent, and SERS-based techniques. Despite significant progress, developing a simple, stable, highly sensitive, and selective LFA system remains a formidable challenge. Nevertheless, an advanced LFA system promises not only to enhance clinical diagnostics but also to extend its utility to environmental monitoring and beyond, demonstrating its potential to revolutionize both healthcare and environmental safety.

Gold Nanoparticle-Decorated Polymer Particles for High-Optical-Density Immunoassay Probes

To realize a highly sensitive immunoassay, high-optical-density probes conjugated with antibodies for target antigens are needed to increase the detectability of antigen-antibody complex formation. In this work, gold nanoparticle (NP)-decorated polymer (GNDP) particles were successfully prepared by mixing positively charged polymer particles and negatively charged Au NPs. GNDP particles decorated with NPs of 20 nm in size had higher optical density than the original Au NPs and GNDPs decorated with smaller Au NPs. Using GNDP particles as a probe, a highly sensitive immunoassay for influenza H1N1 hemagglutinin was realized with a minimum detectable concentration of 32.5 pg/mL. These results indicate that GNDP particles have high potential as an immunoassay probe that can be used in practical immunoassay systems for detecting a wide variety of antigens.

Recent advances in SERS-based immunochromatographic assay for pathogenic microorganism diagnosis: A review

Infectious diseases caused by bacteria, viruses, fungi, and other pathogenic microorganisms are among the most harmful public health problems in the world, causing tens of millions of deaths and incalculable economic losses every year. The establishment of rapid, simple, and highly sensitive diagnostic methods for pathogenic microorganisms is important for the prevention and control of infectious diseases, guidance of timely treatment, and the reduction of public safety risks. Lateral flow immunoassay (LFA) based on the colorimetric signal of colloidal gold is the most popular point-of-care testing technology at present, but it is limited by poor sensitivity and low throughput and hardly meets the needs of the highly sensitive screening of pathogenic microorganisms. In recent years, the combination of surface-enhanced Raman scattering (SERS) and LFA technology has developed into a novel analytical platform with high sensitivity and multiple detection capabilities and has shown great advantages in the detection of pathogenic microorganisms and infectious diseases. This review summarizes the working principle, design ideas, and application of the existing SERS-based LFA methods in pathogenic microorganism detection and further introduces the effect of new technologies such as Raman signal encoding, magnetic enrichment, novel membrane nanotags, and integrated Raman reading equipment on the performance of SERS-LFA. Finally, the main challenges and the future direction of development in this field of SERS-LFA are discussed.

Recent Advances in Metallic Nanostructures-assisted Biosensors for Medical Diagnosis and Therapy

The field of nanotechnology has witnessed remarkable progress in recent years, particularly in its application to medical diagnosis and therapy. Metallic nanostructures-assisted biosensors have emerged as a powerful and versatile platform, offering unprecedented opportunities for sensitive, specific, and minimally invasive diagnostic techniques, as well as innovative therapeutic interventions. These biosensors exploit the molecular interactions occurring between biomolecules, such as antibodies, enzymes, aptamers, or nucleic acids, and metallic surfaces to induce observable alterations in multiple physical attributes, encompassing electrical, optical, colorimetric, and electrochemical signals. These interactions yield measurable data concerning the existence and concentration of particular biomolecules. The inherent characteristics of metal nanostructures, such as conductivity, plasmon resonance, and catalytic activity, serve to amplify both sensitivity and specificity in these biosensors. This review provides an in-depth exploration of the latest advancements in metallic nanostructures-assisted biosensors, highlighting their transformative impact on medical science and envisioning their potential in shaping the future of personalized healthcare.

A semi-quantitative upconversion nanoparticle-based immunochromatographic assay for SARS-CoV-2 antigen detection

The unprecedented public health and economic impact of the coronavirus disease 2019 (COVID-19) pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection has been met with an equally unprecedented scientific response. Sensitive point-of-care methods to detect SARS-CoV-2 antigens in clinical specimens are urgently required for the rapid screening of individuals with viral infection. Here, we developed an upconversion nanoparticle-based lateral flow immunochromatographic assay (UCNP-LFIA) for the high-sensitivity detection of SARS-CoV-2 nucleocapsid (N) protein. A pair of rabbit SARS-CoV-2 N-specific monoclonal antibodies was conjugated to UCNPs, and the prepared UCNPs were then deposited into the LFIA test strips for detecting and capturing the N protein. Under the test conditions, the limit of detection (LOD) of UCNP-LFIA for the N protein was 3.59 pg/mL, with a linear range of 0.01-100 ng/mL. Compared with that of the current colloidal gold-based LFIA strips, the LOD of the UCNP-LFIA-based method was increased by 100-fold. The antigen recovery rate of the developed method in the simulated pharyngeal swab samples ranged from 91.1 to 117.3%. Furthermore, compared with the reverse transcription-polymerase chain reaction, the developed UCNP-LFIA method showed a sensitivity of 94.73% for 19 patients with COVID-19. Thus, the newly established platform could serve as a promising and convenient fluorescent immunological sensing approach for the efficient screening and diagnosis of COVID-19.

Immunochromatographic enhancement strategy for SARS-CoV-2 detection based on nanotechnology

The global outbreak of coronavirus disease 2019 (COVID-19) has been catastrophic to both human health and social development. Therefore, developing highly reliable and sensitive point-of-care testing (POCT) for detecting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has become a priority. Among all available POCTs, the lateral flow immunoassay (LFIA, also known as immunochromatography) has proved to be effective due to its accuracy, portability, convenience, and speed. In areas with a scarcity of laboratory resources and medical personnel, the LFIA provides an affordable option for the diagnosis of COVID-19. This review offers a comprehensive overview of methods for improving the sensitivity of SARS-CoV-2 detection using immunochromatography based on nanotechnology, sorted according to the different detection targets (antigens, antibodies, and nucleic acids). It also looks into the performance and properties of the various sensitivity enhancement strategies, before delving into the remaining challenges in COVID-19 diagnosis through LFIA. Ultimately, it seeks to provide helpful guidance in selecting an appropriate strategy for SARS-CoV-2 immunochromatographic detection based on nanotechnology.

Micro- and nanosystems for the detection of hemorrhagic fever viruses

Hemorrhagic fever viruses (HFVs) are virulent pathogens that can cause severe and often fatal illnesses in humans. Timely and accurate detection of HFVs is critical for effective disease management and prevention. In recent years, micro- and nano-technologies have emerged as promising approaches for the detection of HFVs. This paper provides an overview of the current state-of-the-art systems for micro- and nano-scale approaches to detect HFVs. It covers various aspects of these technologies, including the principles behind their sensing assays, as well as the different types of diagnostic strategies that have been developed. This paper also explores future possibilities of employing micro- and nano-systems for the development of HFV diagnostic tools that meet the practical demands of clinical settings.

Magnetoplasmonic gold nanorods for the sensitive and label-free detection of glutathione

This work exploits the magneto-optical activity of gold nanorods for the detection of sub-micromolar concentrations of glutathione using magnetic circular dichroism spectroscopy. Modulations of the magnetoplasmonic response of nanorods serve as the basis of the sensing methodology, whereby the presence of glutathione induces the end-to-end assembly of nanorods. In particular, the nanorod self-assembly enables a localized electric field in the nanocavities with adsorbed thiol molecules, whose field strength is amplified by the external magnetic field as confirmed by finite-element modeling, enabling their high-sensitivity detection. Our simple magnetoplasmonic sensor for glutathione requires no specific chemical tags and exhibits an impressive limit of detection of 97 nM.

Ultrasensitive Ratiometric Fluorescence Bioassay for Accurate Detection of Covid-19-Specific Nucleocapsid Protein in Clinical Serum Samples Using Modified Cleavable Mesoporous SiO2 Satellite-Enriched Carbon Dots

Due to the presence of various autofluorescent compounds in biological samples like serum and the photobleaching of organic fluorophores, fluorescence sensing has limited practical applicability. This study describes the development of an improved ratiometric fluorescence assay to determine the nucleocapsid protein (N protein), one of the most conserved biomarkers of Covid-19 in spiked and serum samples using highly stable buffer-based near IR-dual emission carbon dots (CDs) encapsulated into the cavities of cleavable silica nanocapsule (SNCs) nanocomposite. The cavities of cleavable silica nanocapsules (SNCs) and the formed core-shell CDs@ SNCs were used as a superior reservoir of fluorescent markers produced by cohydrolyzing tetraethyl orthosilicate and diiminosilane linker, which held hundreds of CDs in silica shell frameworks. The SiO2 nanocomposite was modified with an N protein antibody that specifically paired to the receptor binding region of the Cov-19 spike protein subunit. CDs were taken out of SNCs by NaBH4 reduction, and the released CDs exhibited dual emission at 475 and 675 nm when excited at 400 nm. Ratiometric detection is completed over a binding-induced, concentration-dependent immuno-affinity of the N protein that drives the fluorescence quenching phenomenon between the CDs as fluorophore and the AuNPs as quencher. As the N protein concentration increased, the intensity of the red emission (675 nm) dropped, whereas the intensity of the green emission (475 nm) already remained constant, which is due to sandwich immunoassays of CDs around AuNPs. Using the exceptional fluorescent characteristics of CDs and the high selectivity of nanocomposite functionalized with N-protein antibody, the developed assay efficiently eliminates the autofluorescence background interference of serum samples. The fluorescence ratio (I475/I675) provides a limit of detection of 2 pg mL-1 over a linear range of 0.01 to 5 ng mL-1 and exhibits an amplified sensitivity of 54 times compared to conventional immunoassay using CDs as fluorescent labels. With one-step signal amplification and requiring small sample quantities (only 20 μL), this sensing platform can be effectively used for the accurate detection of N protein, and no cross-reactivity is detected in the presence of different interfering agents.

Attaching protein-adsorbing silica particles to the surface of cotton substrates for bioaerosol capture including SARS-CoV-2

The novel coronavirus pandemic (COVID-19) has necessitated a global increase in the use of face masks to limit the airborne spread of the virus. The global demand for personal protective equipment has at times led to shortages of face masks for the public, therefore makeshift masks have become commonplace. The severe acute respiratory syndrome caused by coronavirus-2 (SARS-CoV-2) has a spherical particle size of ~97 nm. However, the airborne transmission of this virus requires the expulsion of droplets, typically ~0.6-500 µm in diameter (by coughing, sneezing, breathing, and talking). In this paper, we propose a face covering that has been designed to effectively capture SARS-CoV-2 whilst providing uncompromised comfort and breathability for the wearer. Herein, we describe a material approach that uses amorphous silica microspheres attached to cotton fibres to capture bioaerosols, including SARS CoV-2. This has been demonstrated for the capture of aerosolised proteins (cytochrome c, myoglobin, ubiquitin, bovine serum albumin) and aerosolised inactivated SARS CoV-2, showing average filtration efficiencies of ~93% with minimal impact on breathability.

Development of a Fluorescent Immunochromatographic Assay Based on Quantum Dot-Functionalized Two-Dimensional Monolayer Ti3C2 MXene Nanoprobes for the Simultaneous Detection of Influenza A Virus and SARS-CoV-2

Accurate and rapid detection of the influenza A virus (FluA) and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) can effectively control their spread. We developed a colorimetric and fluorescent dual-functional two-channel immunochromatographic assay (ICA) biosensor to simultaneously detect the above-mentioned viruses. A unique two-dimensional Ti3C2-QD immunoprobe was established by adsorbing dense quantum dots (QDs) onto the light green monostromatic Ti3C2 MXene surface, resulting in light green colorimetric and superior fluorescence signals and guaranteeing high sensitivity, stability, and excellent liquidity for ICA detection. Rapid visual screening for FluA and SARS-CoV-2 infections was applicable via a green colorimetric signal. Sensitive and quantitative detection of viruses in their early stages of infection was performed by using the fluorescence signal. Our proposed Ti3C2-QD-ICA biosensor can simultaneously detect 1 ng/mL or 2.4 pg/mL FluA and 1 ng/mL or 6.2 pg/mL SARS-CoV-2 via its colorimetric or fluorescence signals, respectively, with a short testing time (20 min), good reproducibility, specificity, and accuracy. In addition, this method demonstrated sensitivity higher than that of the conventional AuNP-based ICA method in throat swab samples. Hence, our proposed Ti3C2-QD-ICA method can be potentially applied for the rapid, ultrasensitive, and multiplex detection of respiratory viruses.

Biopanning of specific peptide for SARS-CoV-2 nucleocapsid protein and enzyme-linked immunosorbent assay-based antigen assay

The ongoing severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has rapidly spread worldwide which triggered serious public health issues. The search for rapid and accurate diagnosis, effective prevention, and treatment is urgent. The nucleocapsid protein (NP) of SARS-CoV-2 is one of the main structural proteins expressed and most abundant in the virus, and is considered a diagnostic marker for the accurate and sensitive detection of SARS-CoV-2. Herein, we report the screening of specific peptides from the pIII phage library that bind to SARS-CoV-2 NP. The phage monoclone expressing cyclic peptide N1 (peptide sequence, ACGTKPTKFC, with C&C bridged by disulfide bonding) specifically recognizes SARS-CoV-2 NP. Molecular docking studies reveal that the identified peptide is bound to the "pocket" region on the SARS-CoV-2 NP N-terminal domain mainly by forming a hydrogen bonding network and through hydrophobic interaction. Peptide N1 with the C-terminal linker was synthesized as the capture probe for SARS-CoV-2 NP in ELISA. The peptide-based ELISA was capable of assaying SARS-CoV-2 NP at concentrations as low as 61 pg/mL (∼1.2 pM). Furthermore, the as-proposed method could detect the SARS-CoV-2 virus at limits as low as 50 TCID₅₀ (median tissue culture infective dose)/mL. This study demonstrates that selected peptides are powerful biomolecular tools for SARS-CoV-2 detection, providing a new and inexpensive method of rapidly screening infections as well as rapidly diagnosing coronavirus disease 2019 patients.

Diagnostics and analysis of SARS-CoV-2: current status, recent advances, challenges and perspectives

The disastrous spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has induced severe public healthcare issues and weakened the global economy significantly. Although SARS-CoV-2 infection is not as fatal as the initial outbreak, many infected victims suffer from long COVID. Therefore, rapid and large-scale testing is critical in managing patients and alleviating its transmission. Herein, we review the recent advances in techniques to detect SARS-CoV-2. The sensing principles are detailed together with their application domains and analytical performances. In addition, the advantages and limits of each method are discussed and analyzed. Besides molecular diagnostics and antigen and antibody tests, we also review neutralizing antibodies and emerging SARS-CoV-2 variants. Further, the characteristics of the mutational locations in the different variants with epidemiological features are summarized. Finally, the challenges and possible strategies are prospected to develop new assays to meet different diagnostic needs. Thus, this comprehensive and systematic review of SARS-CoV-2 detection technologies may provide insightful guidance and direction for developing tools for the diagnosis and analysis of SARS-CoV-2 to support public healthcare and effective long-term pandemic management and control.

A Review on Self-Assembly of Colloidal Nanoparticles into Clusters, Patterns, and Films: Emerging Synthesis Techniques and Applications

The colloidal synthesis of functional nanoparticles has gained tremendous scientific attention in the last decades. In parallel to these advancements, another rapidly growing area is the self-assembly or self-organization of these colloidal nanoparticles. First, the organization of nanoparticles into ordered structures is important for obtaining functional interfaces that extend or even amplify the intrinsic properties of the constituting nanoparticles at a larger scale. The synthesis of large-scale interfaces using complex or intricately designed nanostructures as building blocks, requires highly controllable self-assembly techniques down to the nanoscale. In certain cases, for example, when dealing with plasmonic nanoparticles, the assembly of the nanoparticles further enhances their properties by coupling phenomena. In other cases, the process of self-assembly itself is useful in the final application such as in sensing and drug delivery, amongst others. In view of the growing importance of this field, this review provides a comprehensive overview of the recent developments in the field of nanoparticle self-assembly and their applications. For clarity, the self-assembled nanostructures are classified into two broad categories: finite clusters/patterns, and infinite films. Different state-of-the-art techniques to obtain these nanostructures are discussed in detail, before discussing the applications where the self-assembly significantly enhances the performance of the process.

Rapid PCR kit: lateral flow paper strip with Joule heater for SARS-CoV-2 detection

Polymerase chain reaction (PCR)-based diagnostic kits for point-of-care (POC) testing are highly desirable to prevent the spread of infectious diseases. Here, we demonstrate a rapid PCR testing kit that involves integrating a lateral flow paper strip with a nichrome-based thin film heater. The use of a paper membrane as a PCR-solution container results in fast thermocycling without a cooler because the membrane can contain the solution with a high specific surface area where Joule heating is applied. After PCR, amplified products are simultaneously detected at the lateral flow paper strip with the naked eye. Severe acute respiratory syndrome β-coronavirus RNA can be detected within 30 min after PCR solution injection. This work reveals that the paper membrane can act as not only a capillary flow channel but also as a promising platform for fast PCR and detection.

Development of sensitive magnetic nanoparticle assisted rapid sandwich assay(s-MARSA) to monitor Parkinson's disease and Schizophrenia pharmacotherapy

Parkinson's disease and Schizophrenia fall under low dopamine neurodegenerative and high dopamine psychiatric disorders respectively. Pharmacological interventions to correct mid-brain dopamine concentrations sometimes overshoots the physiological dopamine levels leading to psychosis in Parkinson's disease patients and, extra-pyramidal symptoms in schizophrenia patients. Currently no validated method is available to monitor side effects in such patients, Apolipoprotein E is one of the CSF biomarkers identified in the recent past that shows an inverse relation to mid-brain dopamine concentration. In this study, we have developed s-MARSA for the detection of Apolipoprotein E from ultra-small volume (2 μL) of CSF. s-MARSA exhibits a broad detection range (5 fg mL^-1 to 4 μg mL^-1) with a better detection limit and could be performed within an hour utilizing only a small volume of CSF sample. The values measured by s-MARSA strongly correlates with the values measured by ELISA. Our method has advantages over ELISA in having a lower detection limit, a broader linear detection range, shorter analysis time, and requiring a low volume of CSF samples. The developed s-MARSA method holds promise for the detection of Apolipoprotein E with clinical utility for monitoring pharmacotherapy of Parkinson's and Schizophrenia patients.

Integration of on-chip lysis and paper-based sensor for rapid detection of viral and exosomal RNAs

In recent years, paper-based nucleic acid sensors have been demonstrated for the ability to detect DNA and RNA molecules extracted from viruses and bacteria. In clinical samples, these nucleic acids are mostly encapsulated in lipid membranes and need to be released before being analyzed using paper-based sensors. For the nucleic acid amplification tests (NAATs), it is also desirable to remove the interfering molecules that can inhibit the nucleic acid amplification. To achieve a field deployable NAAT, we report a portable sensor system that combines the thermolysis and paper-based NAATs to detect target RNA molecules carried by viral and exosomal nanoparticles. The sensor cartridge includes a lysis chamber with a pressure-controlled diaphragm valve, paper flow channels, and three paper-based NAAT reaction chambers to extract, transport, and detect nucleic acids respectively. A compact instrument was prototyped to automate the assay, collect fluorescence images of the nucleic acid amplification, and generate amplification curves for NAATs. The pump-free and paper-based sensor achieved quantitative analysis of influenza A virus (IAV) RNA and exosome microRNA within 1 h, with the lowest detect concentration of 10⁴ TCID₅₀/mL and 10⁶ EV/mL for IAV and exosome, respectively. Owing to the advantages of easy storage, simple operation, and low cost, such as system has great potential to be used as a point-of-care test for in-field diagnosis of viral and bacterial infections.

A novel paper-based lysis strip for SARS-CoV-2 RNA detection at low resource settings

Infectious respiratory diseases such as COVID-19 are serious and global concerns from the past to the present. To isolate the spread of infectious diseases even in the absence of a health system, a simple, inexpensive, reliable, sensitive, and selective molecular diagnosis platform for Point of Care Test (POCT) is required. Especially, the nucleic acid extraction step is difficult to perform out of laboratory. Here, we propose a paper-based lysis (PBL) strip for nucleic acid extraction, especially in low-resource settings (LRS). PBL strips are suitable for isolating RNA from viruses with biological interference and inhibitors. We optimized the buffer compositions and membranes of the strip. A simple preparation method using a PBL strip could obtain an eluent for downstream inspection within 20 min. Overall, 10⁴ copies/swaps were detected for 20 min for amplification in combination with Reverse Transcription Loop-Mediated Amplification (RT-LAMP).

Sandwich mode lateral flow assay for point-of-care detecting SARS-CoV-2

The global corona virus disease 2019 (COVID-19) has been announced a pandemic outbreak, and has threatened human life and health seriously. Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), as its causative pathogen, is widely detected in the screening of COVID-19 patients, infected people and contaminated substances. Lateral flow assay (LFA) is a popular point-of-care detection method, possesses advantages of quick response, simple operation mode, portable device, and low cost. Based on the above advantages, LFA has been widely developed for detecting SARS-CoV-2. In this review, we summarized the articles about the sandwich mode LFA detecting SARS-CoV-2, classified according to the target detection objects indicating genes, nucleocapsid protein, spike protein, and specific antibodies of SARS-CoV-2. In each part, LFA is further classified and summarized according to different signal detection types. Additionally, the properties of the targets were introduced to clarify their detection significance. The review is expected to provide a helpful guide for LFA sensitization and marker selection of SARS-CoV-2.

Concave gold nano-arrows (AuCNAs) for efficient catalytic reduction of 4-nitrophenol

Anisotropic gold nanostructures have attracted great attention in different fields including catalysis. Thermodynamically driven selective surface growth offers a reliable and reproducible method for anisotropic gold nanoparticle synthesis with specific morphologies. Herein, monocrystalline concave gold nano-arrows (AuCNAs) are prepared by the over-growth method using Au nanorods (AuNRs) as seeds. The as-prepared AuCNAs consist of a biconical head and four concave structures. Interestingly, silver ions (Ag⁺) concentration significantly affects the product morphology by tuning the peak positions of surface plasmon resonance (SPR), aspect ratio, arrow, and concave morphology of AuCNAs. The position of longitudinal SPR peaks is observed at 810, 805 and 782 nm at [Ag⁺]/[Au³⁺] molar ratios of 1:2, 1:1, and 2:1, respectively. Diameters and lengths of AuCNAs varied from 25 nm to 36 nm; 104 nm, 78 nm, and 120 nm, respectively. Additionally, the AuCNAs are applied for the catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in presence of excess NaBH₄. Compared to gold nanorods (AuNRs), the prepared AuCNAs catalyst shows excellent catalytic activity, demonstrating that concave structures and sharp corners significantly enhance the catalytic activity. The value of pseudo-first-order reaction kinetic constants (k_app) increased from 0.0051 to 0.0195 s^-1 with increasing catalyst valume from 7.5 to 37.5 μL. The highest normalized reaction rate constant (K_nor) and turnover frequency (TOF) reach 5.84 × 10⁴ min^-1 mmol^-1 and 443.47 h^-1, respectively, at [Ag⁺]/[Au³⁺] ratio of 1:1 in AuCNAs catalyst. This study expands catalytic applications of anisotropic gold nanostructures and widens their potential application areas, such as surface plasmon exciton photonics, biomedical photonics, and photocatalysis.

Achieving broad availability of SARS-CoV-2 detections via smartphone-based analysis

With the development of COVID-19, widely available tests are in great demand. Naked-eye SARS-CoV-2 test kits have recently been developed as home tests, but their sensitivity and accuracy are sometimes limited. Smartphones can convert various signals into digital information, potentially improving the sensitivity and accuracy of these home tests. Herein, we summarize smartphone-based detections for SARS-CoV-2. Optical detections of non-nucleic acids using various sensors and portable imaging systems, as well as nucleic acid analyses based on LAMP, CRISP, CATCH, and biosensors are discussed. Furthermore, different electrochemical detections were compared. We show results obtained using relatively complex equipment, complicated programming procedures, or custom smartphone apps, and describe methods for obtaining information with only simple setups and free software on smartphones. Then, the combined costs of typical smartphone-based detections are evaluated. Finally, the prospect of improving smartphone-based strategies to achieve broad availability of SARS-CoV-2 detection is proposed.

Current trends in COVID-19 diagnosis and its new variants in physiological fluids: Surface antigens, antibodies, nucleic acids, and RNA sequencing

Rapid, highly sensitive, and accurate virus circulation monitoring techniques are critical to limit the spread of the virus and reduce the social and economic burden. Therefore, point-of-use diagnostic devices have played a critical role in addressing the outbreak of COVID-19 (SARS-CoV-2) viruses. This review provides a comprehensive overview of the current techniques developed for the detection of SARS-CoV-2 in various body fluids (e.g., blood, urine, feces, saliva, tears, and semen) and considers the mutations (i.e., Alpha, Beta, Gamma, Delta, Omicron). We classify and comprehensively discuss the detection methods depending on the biomarker measured (i.e., surface antigen, antibody, and nucleic acid) and the measurement techniques such as lateral flow immunoassay (LFIA), enzyme-linked immunosorbent assay (ELISA), reverse transcriptase-polymerase chain reaction (RT-PCR), reverse transcription loop-mediated isothermal amplification (RT-LAMP), microarray analysis, clustered regularly interspaced short palindromic repeats (CRISPR) and biosensors. Finally, we addressed the challenges of rapidly identifying emerging variants, detecting the virus in the early stages of infection, the detection sensitivity, selectivity, and specificity, and commented on how these challenges can be overcome in the future.

Development of a colloidal gold immunochromatographic test strip for the rapid detection of iprodione

Iprodione is a dicarboximide fungicide that is widely used in agriculture around the world. A reliable and rapid detection method is needed for the on-site monitoring of iprodione residues in a variety of agricultural products. Herein, a colloidal gold immunochromatographic test strip was developed based on a selected coating antigen and a specific monoclonal antibody against iprodione. The particle size of colloidal gold, the preparation technique of the conjugate pad, the composition of the loading buffer, and the extraction solvent were comprehensively optimized for the test strip. A cut-off value of 0.9 mg kg^-1 (50 ng mL^-1) and a visual limit of detection of 0.09 mg kg^-1 (5 ng mL^-1) were achieved in a complex matrix of tobacco. No cross-reactivity was observed for iprodione metabolite and four other widely used pesticides during tobacco growth. Furthermore, the developed colloidal gold immunochromatographic test strip was applied to determine iprodione residues in tobacco samples, and the obtained results were in good agreement with those obtained by liquid chromatography tandem mass spectrometry. Additionally, the test strip was found to be stable afterlong-term storage at 37 °C for two months. The developed colloidal gold immunochromatographic test strip showed excellent accuracy, sensitivity, specificity, and stability, therefore, it is suitable for the rapid detection of iprodione residues in complex matrices.

A novel photoelectrochemical immunosensor based on TiO2@Bi2WO6 hollow microspheres and Ag2S for sensitive detection of SARS-COV-2 nucleocapsid protein

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-COV-2) is a cluster of β coronaviruses. The 2019 coronavirus disease (COVID-19) caused by SARS-COV-2 is emerging as a global pandemic. Thus, early diagnosis of SARS-COV-2 is essential to prevent severe outbreaks of the disease. In this experiment, a novel label-free photoelectrochemical (PEC) immunosensor was obtained based on silver sulfide (Ag2S) sensitized titanium dioxide@bismuth tungstate (TiO2@Bi2WO6) nanocomposite for quantitative detection of SARS-COV-2 nucleocapsid protein. The constructed TiO2@Bi2WO6 hollow microspheres had large specific surface area and could produce high photocurrent intensity under visible light illumination. Ag2S was in-situ grown on the surface of thioglycolic acid (TGA) modified TiO2@Bi2WO6. In particular, TiO2@Bi2WO6 and Ag2S formed a good energy level match, which could effectively enhance the photocurrent conversion efficiency and strength the photocurrent response. Ascorbic acid (AA) acted as an effective electron donor to effectively eliminate photogenerated holes. Under optimal experimental conditions, the constructed immunosensor presented a supersensitive response to SARS-COV-2 nucleocapsid protein, with a desirable linear relationship ranged from 0.001 to 50 ng/mL for nucleocapsid protein and a lower detection limit of 0.38 pg/mL. The fabricated sensor exhibited a wide linear range, excellent selectivity, specificity and stability, which provided a valuable referential idea for the detection of SARS-COV-2.

Introduction of graphene oxide-supported multilayer-quantum dots nanofilm into multiplex lateral flow immunoassay: A rapid and ultrasensitive point-of-care testing technique for multiple respiratory viruses

A lateral flow immunoassay (LFA) biosensor that allows the sensitive and accurate identification of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and other common respiratory viruses remains highly desired in the face of the coronavirus disease 2019 pandemic. Here, we propose a multiplex LFA method for the on-site, rapid, and highly sensitive screening of multiple respiratory viruses, using a multilayered film-like fluorescent tag as the performance enhancement and signal amplification tool. This film-like three-dimensional (3D) tag was prepared through the layer-by-layer assembly of highly photostable CdSe@ZnS-COOH quantum dots (QDs) onto the surfaces of monolayer graphene oxide nanosheets, which can provide larger reaction interfaces and specific active surface areas, higher QD loads, and better luminescence and dispersibility than traditional spherical fluorescent microspheres for LFA applications. The constructed fluorescent LFA biosensor can simultaneously and sensitively quantify SARS-CoV-2, influenza A virus, and human adenovirus with low detection limits (8 pg/mL, 488 copies/mL, and 471 copies/mL), short assay time (15 min), good reproducibility, and high accuracy. Moreover, our proposed assay has great potential for the early diagnosis of respiratory virus infections given its robustness when validated in real saliva samples.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (Section S1 Experimental section, Section S2 Calculation of the maximum number of QDs on the GO@TQD nanofilm, Section S3 Optimization of the LFA method, and Figs. S1-S17 mentioned in the main text) is available in the online version of this article at 10.1007/s12274-022-5043-6.

Absorption-Modulated SiO2@Au Core-Satellite Nanoparticles for Highly Sensitive Detection of SARS-CoV-2 Nucleocapsid Protein in Lateral Flow Immunosensors

The worldwide spread of coronavirus disease 2019 (COVID-19) highlights the need for rapid, simple, and accurate tests to detect various variants of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The antigen test, based on the lateral flow immunoassay (LFI), is a suitable "first line of defense" test that enables early identification and timely isolation of patients to minimize viral transmission among communities. However, it is generally less accurate than nucleic acid testing, and its sensitivity needs improvement. Here, a novel rapid detection method is designed to sensitively detect SARS-CoV-2 using isolated gold nanoparticle (AuNP)-assembled SiO2 core-satellite nanoparticles (SiO2@Au CSNPs). Well-grown AuNP satellites in the synthesis of SiO2@Au CSNPs significantly enhanced their light absorption, increased the detection sensitivity, and lowered the detection limit by 2 orders of magnitude relative to conventional gold colloids. The proposed system enabled highly sensitive detection of the SARS-CoV-2 nucleocapsid protein with a detection limit of 0.24 pg mL-1 within 20 min. This is the first study to develop a highly sensitive antigen test using the absorption-modulated SiO2@Au CSNPs. Our findings demonstrate the capacity of this platform to serve as an effective sensing strategy for managing pandemic conditions and preventing the spread of viral infections.

Ultrasensitive Detection of COVID-19 Virus N Protein Based on p-Toluenesulfonyl Modified Fluorescent Microspheres Immunoassay

The pandemic of new coronary pneumonia caused by the COVID-19 virus continues to ravage the world. Large-scale population testing is the key to controlling infection and related mortality worldwide. Lateral flow immunochromatographic assay (LFIA) is fast, inexpensive, simple to operate, and easy to carry, very suitable for detection sites. This study developed a COVID-19 N protein detect strip based on p-toluenesulfonyl modified rare earth fluorescent microspheres. The p-toluenesulfonyl-activated nanomaterials provide reactive sulfonyl esters to covalently attach antibodies or other ligands containing primary amino or sulfhydryl groups to the nanomaterial surface. Antibodies are immobilized on these nanomaterials through the Fc region, which ensures optimal orientation of the antibody, thereby increasing the capture rate of the target analyte. The use of buffers with high ionic strength can promote hydrophobic binding; in addition, higher pH could promote the reactivity of the tosyl group. The detection limit of the prepared COVID-19 N protein strips can reach 0.01 ng/mL, so it has great application potential in large-scale population screening.