Extending the limits of Bacillus for novel biotechnological applications

Valorization of Algal Biomass to Produce Microbial Polyhydroxyalkanoates: Recent Updates, Challenges, and Perspectives

Biopolymers are highly desirable alternatives to petrochemical-based plastics owing to their biodegradable nature. The production of bioplastics, such as polyhydroxyalkanoates (PHAs), has been widely reported using various bacterial cultures with substrates ranging from pure to biowaste-derived sugars. However, large-scale production and economic feasibility are major limiting factors. Now, using algal biomass for PHA production offers a potential solution to these challenges with a significant environmental benefit. Algae, with their unique ability to utilize carbon dioxide as a greenhouse gas (GHG) and wastewater as feed for growth, can produce value-added products in the process and, thereby, play a crucial role in promoting environmental sustainability. The sugar recovery efficiency from algal biomass is highly variable depending on pretreatment procedures due to inherent compositional variability among their cell walls. Additionally, the yields, composition, and properties of synthesized PHA vary significantly among various microbial PHA producers from algal-derived sugars. Therefore, the microalgal biomass pretreatments and synthesis of PHA copolymers still require considerable investigation to develop an efficient commercial-scale process. This review provides an overview of the microbial potential for PHA production from algal biomass and discusses strategies to enhance PHA production and its properties, focusing on managing GHGs and promoting a sustainable future.

Metabolic and Morphological Aspects of Adaptation of Alkaliphilic Bacillus aequororis 5-DB and Alkali-Tolerant Bacillus subtilis ATCC 6633 to Changes in pH and Mineralization

The goal of the study is to evaluate metabolic and morphological changes of the facultative alkaliphile Bacillus aequororis 5-DB and the weakly alkali-resistant B. subtilis ATCC 6633 in a wide pH range and at different NaCl concentrations. The alkaliphile B. aequororis 5-DB is shown to have a broader general resistance to adverse factors (wide pH range, 50 g/L NaCl) than a weakly alkali-tolerant strain of the same genus. This alkaliphile is also shown to have a significantly greater resistance not only to high pH but also to low pH in comparison with B. subtilis ATCC 6633. The resistance of B. aequororis 5-DB to low pH was expressed in higher metabolic activity, maintenance of ΔpH, and no significant cell damage. The selected set of methods (reduction of resazurin to resorufin by cell dehydrogenases, bioluminescent method for determining ATP, AFM, and measurement of intracellular pH) allows us to adequately assess the ability of microbial cells to withstand harsh environmental factors. Nonspecific resistance of B. aequororis 5-DB was proven using a complex of selected methods. Tolerance to a wide range of pH and high salt concentrations may be useful for biotechnological applications of the strain.

Application of PHA surface binding proteins of alkali-tolerant Bacillus as surfactants

Amphiphilic protein has lipophilic and hydrophilic domains, displaying the potential for development as a biosurfactant. The polyhydroxyalkanoate (PHA) surface binding protein derived from Bacillus is a type of protein that has not been studied for its emulsifying properties. In this study, PHA granule-associated protein (PhaP), PHA regulatory protein (PhaQ), and PHA synthase subunit (PhaR) derived from an alkali-tolerant PHA-producing Bacillus cereus HBL-AI were found and heterologously expressed in E. coli and purified to investigate their application as biosurfactants. It showed that the emulsification ability and stability of three amphiphilic proteins were higher than those of widely used chemical surfactants in diesel oil, vegetable oil, and lubricating oil. In particular, the PhaQ protein studied for the first time can form a stable emulsion layer in vegetable oil at a lower concentration (50 µg/mL), which greatly reduced the amount of protein used in emulsification. This clearly demonstrated that the PHA-binding protein of HBL-AI can be well applied as an environmentally friendly biosurfactants.

Traditional Chinese medicine residue enzymatic hydrolysates for production of polyhydroxyalkanoate by newly isolated Bacillus altitudinis

Traditional Chinese medicine residue (TCMR) was utilized as an inexpensive carbon source for the production of poly(3-hydroxybutyrate) (PHB) using the newly isolated Bacillus altitudinis HBU-SI7. The results showed that Yu Ping Feng TCMR could be directly hydrolysed by cellulase to obtain a high proportion of glucose (99 % of total sugar) without pretreatment, achieving an enzymatic hydrolysis rate of up to 89.2 %. B. altitudinis could grow and produce PHB when using enzymatically hydrolysed TCMR in a 5-L fermenter. After 20 h of fermentation, the maximum concentration of PHB was 11.2 g/L, and the highest cell dry weight (CDW) was 15.4 g/L, with 72.7 % of the PHB fraction in CDW. Moreover, this strain could utilize enzymatic hydrolysates from various herbal formulas to produce high levels of PHB. This novel approach aims to accumulate PHB from TCMR hydrolysates, offering an effective and environmentally friendly method to reduce production costs and achieve mass production.

Bacterial biofilm inhibitors: An overview

Bacteria that cause infectious diseases adopt biofilms as one of their most prevalent lifestyles. Biofilms enable bacteria to tolerate environmental stress and evade antibacterial agents. This bacterial defense mechanism has rendered the use of antibiotics ineffective for the treatment of infectious diseases. However, many highly drug-resistant microbes have rapidly emerged owing to such treatments. Different signaling mechanisms regulate bacterial biofilm formation, including cyclic dinucleotide (c-di-GMP), small non-coding RNAs, and quorum sensing (QS). A cell density-dependent phenomenon, QS is associated with c-di-GMP (a global messenger), which regulates gene expression related to adhesion, extracellular matrix production, the transition from the planktonic to biofilm stage, stability, pathogenicity, virulence, and acquisition of nutrients. The article aims to provide information on inhibiting biofilm formation and disintegrating mature/preformed biofilms. This treatment enables antimicrobials to target the free-living/exposed bacterial cells at lower concentrations than those needed to treat bacteria within the biofilm. Therefore, a complementary action of antibiofilm and antimicrobial agents can be a robust strategic approach to dealing with infectious diseases. Taken together, these molecules have broad implications for human health.

Valorisation of Pineapple Cannery Waste as a Cost Effective Carbon Source for Poly 3-hydroxyabutyrate (P3HB) Production

Pineapple is one of the most important agro-industrial sugar-based fruits in Thailand. In this study, the waste stream from pineapple cannery processing was utilised and evaluated for potential use in the production of a main biopolymer group widely known as polyhydroxyalkanoates (PHAs) through aerobic batch fermentation. Firstly, pineapple cannery waste (PCW) collected from three processing sources, pineapple juice (PAJ), peel and core juice (PCJ), and pulp-washing water (PWW), was used as a carbon source. Secondly, it was characterised and pretreated. Then, batch fermentation was performed by using the optimal condition (200 rpm agitation rate, 37 °C, and fermentation time of 72 h) under two different nutrient conditions in each type of carbon source. The results revealed that PHAs were produced during 24-72 h of fermentation without any interference. The PHAs product obtained was characterised by their properties. Interestingly, GC-MS showed homopolymer of poly 3-hydroxybutyrate (P3HB) group characteristics, such as OH, CH, and C=O; meanwhile, H1 NMR analysis showed signals corresponding to CH3, CH2, and CH, respectively. Remarkably, utilising the PCW showed a high-potential cheap carbon source for the production of PHAs as well as for the treatment of wastewater from the fruit industry.

Polyhydroxy butyrate biosynthesis by Azotobacter chroococcum MTCC 3858 through groundnut shell as lignocellulosic feedstock using resource surface methodology

This work appraises the prospect of utilising groundnut shell hydrolysate as a feedstock used for PHB biosynthesis by Azotobacter chroococcum MTCC 3853 under SMF conditions. Sugar reduction: untreated and pretreated 20% H₂SO₄ (39.46 g/l and 62.96 g/l, respectively), untreated and enzymatic hydrolysis (142.35 mg/g and 568.94 mg/g). The RSM-CCD optimization method was used to generate augment PHB biosynthesis from groundnut shell hydrolysate (30 g/l), ammonium sulphate (1.5 g/l), ammonium chloride (1.5 g/l), peptone (1.5 g/l), pH 7, 30 °C, and a 48 h incubation time. The most convincing factors (p < 0.0001), coefficient R² values of biomass 0.9110 and PHB yield 0.9261, PHB production, highest biomass (17.23 g/l), PHB Yield(11.46 g/l), and 66.51 (wt% DCW) values were recorded. The control (untreated GN) PHB yield value of 2.86 g/l increased up to fourfold in pretreated GN. TGA results in a melting range in the peak perceived at 270.55 °C and a DSC peak range of 172.17 °C, correspondingly. According to the results, it furnishes an efficient agricultural waste executive approach by diminishing the production expenditure. It reinforces the production of PHB, thereby shrinking our reliance on fossil fuel-based plastics.

The analysis of the function, diversity, and evolution of the Bacillus phage genome

BACKGROUND

Phages play a pivotal role in the evolution of microbial populations. The interactions between phages and their hosts are complex and may vary in response to host physiology and environmental conditions. Here, we have selected the genomes of some representative Bacillus prophages and lysosomes from the NCBI database for evolutionary analysis. We explored their evolutionary relationships and analyzed the protein information encoded by hundreds of Bacillus phages.

RESULTS

We obtained the following conclusions: First, Bacillus phages carried some known functional gene fragments and a large number of unknown functional gene fragments, which might have an important impact on Bacillus populations, such as the formation of spores and biofilms and the transmission of virulence factors. Secondly, the Bacillus phage genome showed diversity, with a clear genome boundary between Bacillus prophages and Bacillus lytic phages. Furthermore, genetic mutations, sequence losses, duplications, and host-switching have occurred during the evolution of the Bacillus phage, resulting in low genome similarity between the Bacillus phages. Finally, the lysis module played an important influence on the process of Bacillus phage cross-species infestation.

CONCLUSIONS

This study systematically described their protein function, diversity, and genome evolution, and the results of this study provide a basis for evolutionary diversity, horizontal gene transfer and co-evolution with the host in Bacillus phages.

Biotechnological and food synthetic biology potential of platform strain: Bacillus licheniformis

Bacillus licheniformis is one of the most characteristic Gram-positive bacteria. Its unique genetic background and safety characteristics make it have important biologic applications in the food industry, including, the biosynthesis of high value-added bioproducts, probiotic functions, biological treatment of wastes derived from food production, etc. In this review, these recent advances are summarized and presented systematically for the first time. In addition, we highlight synthetic biology strategies as a potential driver of developing this strain for wider and more efficient application in the food industry. Finally, we present the current challenges faced and provide our unique perspective on relevant future research directions. In summary, this review will provide an illuminating and comprehensive perspective that will allow an in-depth understanding of B. licheniformis and promote its more effective development in the food industry.

Characterization of the Culturable Sporobiota of Spanish Olive Groves and Its Tolerance toward Environmental Challenges

Olive agriculture presents an integral economic and social pillar of the Mediterranean region with 95% of the world's olive tree population concentrated in this area. A diverse ecosystem consisting of fungi, archaea, viruses, protozoa, and microbial communities-the soil microbiome-plays a central role in maintaining healthy soils while keeping up productivity. Spore-forming organisms (i.e., the sporobiota) have been identified as one of the predominant communities of the soil microbiome and are known for the wide variety of antimicrobial properties and extraordinary resistance. Hence, the aim of this work was to determine the culturable sporobiota of Spanish olive orchards and characterize its phenotypic properties toward common environmental challenges. A collection of 417 heat-resistant bacteria were isolated from five Spanish olive orchards. This collective was termed the "olive sporobiota." Rep-PCR clustering of representative isolates revealed that they all belonged to the group of Bacillus spp., or closely related species, showing a great variety of species and strains. Representative isolates showed susceptibility to common antibiotics, as well as good resistance to heavy metal exposure, with an order of metal tolerance determined as iron > copper > nickel > manganese > zinc > cadmium. Finally, we showed that the application of mineral fertilizer can in several cases enhance bacterial growth and thus potentially increase the relative proportion of the sporobiota in the olive grove ecosystem. In summary, the identification of the culturable olive sporobiota increases our understanding of the microbial diversity in Spanish olive groves, while tolerance and resistance profiles provide important insights into the phenotypic characteristics of the microbial community. IMPORTANCE Microbial communities are a key component of healthy soils. Spore-forming microorganisms represent a large fraction of this community-termed the "sporobiota"-and play a central role in creating a conducive environment for plant growth and food production. In addition, given their unique features, such as extraordinary stability and antimicrobial properties, members of the sporobiota present interesting candidates for biotechnological applications, such as sustainable plant protection products or in a clinical setting. For this, however, more information is needed on the spore-forming community of agricultural installations, ultimately promoting a transition toward a more sustainable agriculture.

Recent trends of biotechnological production of polyhydroxyalkanoates from C1 carbon sources

Growing concerns over the use of limited fossil fuels and their negative impacts on the ecological niches have facilitated the exploration of alternative routes. The use of conventional plastic material also negatively impacts the environment. One such green alternative is polyhydroxyalkanoates, which are biodegradable, biocompatible, and environmentally friendly. Recently, researchers have focused on the utilization of waste gases particularly those belonging to C1 sources derived directly from industries and anthropogenic activities, such as carbon dioxide, methane, and methanol as the substrate for polyhydroxyalkanoates production. Consequently, several microorganisms have been exploited to utilize waste gases for their growth and biopolymer accumulation. Methylotrophs such as Methylobacterium organophilum produced highest amount of PHA up to 88% using CH₄ as the sole carbon source and 52-56% with CH₃OH. On the other hand Cupriavidus necator, produced 71-81% of PHA by utilizing CO and CO₂ as a substrate. The present review shows the potential of waste gas valorization as a promising solution for the sustainable production of polyhydroxyalkanoates. Key bottlenecks towards the usage of gaseous substrates obstructing their realization on a large scale and the possible technological solutions were also highlighted. Several strategies for PHA production using C1 gases through fermentation and metabolic engineering approaches are discussed. Microbes such as autotrophs, acetogens, and methanotrophs can produce PHA from CO₂, CO, and CH₄. Therefore, this article presents a vision of C1 gas into bioplastics are prospective strategies with promising potential application, and aspects related to the sustainability of the system.

Geobacillus thermoleovorans MTCC 13131: An Amide-Hydrolyzing Thermophilic Bacterium Isolated from a Hot Spring of Manikaran

Geobacillus thermoleovorans MTCC 13131, an amide hydrolyzing bacteria was isolated from a hot spring in Himachal Pradesh and identified through 16S rRNA gene sequence analysis. The amidase derived from this bacterium exhibited hydrolyzing catalytic ability against aliphatic and aromatic amides. The isolate was characterized for morphological and biochemical properties. Further, the production of amidase enzyme from this isolate was evaluated using approach of one-variable-at-a-time and response surface method. The Response Surface Methodology based study indicated the importance of nitrogen sources and growth period for amidase production. Optimal production was achieved at a temperature 55 °C, and production pH 7.5 in the production medium comprising diammonium hydrogen phosphate (0.4%), peptone (0.45%) and yeast extract (0.3%). The wide substrate affinity of the strain suggests its potential role in biotransformation of amides to corresponding acids of industrial significance along with its strong capacity to degrade the toxic amide in polluted environmental samples.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12088-022-01042-9.

Sustainable applications of polyhydroxyalkanoates in various fields: A critical review

PHA is one of the most promising candidates in bio-polymer family which is biodegradable and environment-friendly in nature. In recent years, it has been applied as a biodegradable alternative for petroleum-based plastic across different domains. In literature, several research groups have scrutinised the biocompatibility and biodegradability of PHA in both in vivo settings as well as in in vitro conditions. Microbial yield polyhydroxyalkanoates (PHAs) are promoted at present as biodegradable plastics. On the other hand, only a limited number of products is being commercially manufactured out of PHAs (e.g., bottles). A succession of microbes (prokaryotes in addition to eukaryotes) has been identified as potential candidates that can disintegrate PHAs. These materials have been successfully employed in packaging industry, medical devices and implants, moulded goods, paper coatings, adhesives, performance additives, mulch films, non-woven fabrics, etc. The present paper reviews and focuses on the potential applications of PHA and its derivatives in different industries.

Isolation and Characterization of Human Intestinal Bacteria Cytobacillus oceanisediminis NB2 for Probiotic Potential

Systemic characterization of the human gut microbiota highlighted its vast therapeutic potential. Despite having enormous potential, the non-availability of their culture representatives created a bottleneck to understand the concept of microbiome-based therapeutics. The present study is aimed to isolate and evaluate the probiotic potential of a human gut isolate. Physiochemical, morphological, and phylogenetic characterization of a human gut isolate identifies it as a rod-shaped gram-negative microbe taxonomically affiliated with the Cytobacillus genus, having an optimal growth at 37°C in a partially alkaline environment (pH 8.0). This human gut isolate showed continuous growth in the presence of salts (up to 7% NaCl and 10% KCl), antibiotics, metals and metalloids [silver nitrate (up to 2 mM); lead acetate (up to 2 mM); sodium arsenate (up to 10 mM); potassium dichromate (up to 2 mM)], gastric and intestinal conditions, diverse temperature (25–50°C), and pH (5–9) conditions making it fit to survive in the highly variable gut environment. Genomic characterization identified the presence of gene clusters for diverse bio-catalytic activity, stress response, and antimicrobial activity, as well as it indicated the absence of pathogenic gene islands. A combination of functional features like anti-amylase, anti-lipase, glutenase, prolyl endopeptidase, lactase, bile salt hydrolase, cholesterol oxidase, and anti-pathogenic activity is indicative of its probiotic potential in various disorders. This was further substantiated by the CaCo-2 cell line assay confirming its cellular adherence and biosafety. Conclusively, human gut isolate possessed significant probiotic potential that can be used to promote animal and human health.

A simple judgment method for joint action of antibacterial agents on bacterial resistance

The severe pollution of bacterial resistance induced by the wide and even indiscriminate use of antibacterial agents has posed serious threats to human health and ecological safety. Furthermore, the combined effects of antibacterial agents have a closer relationship with the pollution of bacterial resistance than single antibacterial agent. However, there is little information regarding how multiple antibacterial agents interplay to induce bacterial resistance. Here, we developed a simple judgment method with five basic procedures for the joint action of antibacterial agents on bacterial resistance, involving toxicity determination, mutation frequency determination, conjugative transfer frequency determination, dose-response relationship fitting, key parameters obtaining, and joint resistance action judgment. This proposed approach was validated through investigating the joint resistance action between silver nanoparticle (AgNP) and 1-pyrrolidino-1-cyclohexene (1P1C, a kind of quorum sensing inhibitors). According to the procedures, the mutation unit and conjugative transfer unit for the AgNP-1P1C mixture were calculated to be 64.27 and 5.10, respectively, indicating the antagonism for their joint resistance action. This method can not only benefit the mechanistic explanation for how mixed antibacterial agents stimulate the bacterial resistance, but also guide the environmental risk assessment and clinical use of combined antibacterial agents in the related fields. • We present a novel method to judge the joint resistance action of antibacterial agents, taking the emergence and dissemination of antibiotic resistance genes into account. • Toxicity determination can help to design the mixtures of antibacterial agents and confirm the appropriate test concentration range of antibacterial agents used in mutation frequency and conjugative transfer frequency determination. • The mutation unit and conjugative transfer unit were proposed according to the toxic unit in the judgment of joint toxic action.

Roots of the xerophyte Panicum turgidum host a cohort of ionizing-radiation-resistant biotechnologically-valuable bacteria

Bacterial communities associated with roots of Panicum turgidum, exposed to arid conditions, were investigated with a combination of cultural and metataxonomic approaches. Traditional culture-based techniques were used and 32 isolates from the irradiated roots were identified as belonging to Actinobacteria, Bacteroidetes, Firmicutes and Proteobacteria phyla. Four actinobacterial strains were shown to be ionizing-radiation (IR)-resistant: Microbacterium sp. PT8 (4.8 kGy (kGy)), Micrococcus sp. PT11 (4.4 kGy), Kocuria rhizophila PT10 (2.9 kGy) and Promicromonospora panici PT9^T (2.6 kGy), based on the D₁₀ dose necessary for a 90% reduction in colony forming units (CFU). Concerning the investigation of microbial communities in situ, metataxonomic analyses of the diversity of IR-resistant microorganisms associated with irradiated roots revealed a marked dominance of Actinobacteria (46.6%) and Proteobacteria (31.5%) compared to Bacteroidetes (4.6%) and Firmicutes (3.2%). Gamma irradiation not only changed the structure of bacterial communities, but also affected their functional properties. Comparative analyses of metabolic profiles indicated the induction of several pathways related to adaptation to oxidative stress in irradiated roots, such as DNA repair, secondary metabolites synthesis, reactive oxygen species (ROS)-mitigating enzymes, etc. P. turgidum is emblematic of desert-adapted plants. Until now, there is no other work that has focused on the microbial profile of irradiated roots of this xerophyte.

Biomolecules Production from Greenhouse Gases by Methanotrophs

Harmful effects on living organisms and the environment are on the rise due to a significant increase in greenhouse gas (GHG) emissions through human activities. Therefore, various research initiatives have been carried out in several directions in relation to the utilization of GHGs via physicochemical or biological routes. An environmentally friendly approach to reduce the burden of significant emissions and their harmful effects is the bioconversion of GHGs, including methane (CH4) and carbon dioxide (CO2), into value-added products. Methanotrophs have enormous potential for the efficient biotransformation of CH4 to various bioactive molecules, including biofuels, polyhydroxyalkanoates, and fatty acids. This review highlights the recent developments in methanotroph-based systems for methanol production from GHGs and proposes future perspectives to improve process sustainability via biorefinery approaches.

Anaerobic Digestion of Agri-Food Wastes for Generating Biofuels

Presently, fossil fuels are extensively employed as major sources of energy, and their uses are considered unsustainable due to emissions of obnoxious gases on the burning of fossil fuels, which can lead to severe environmental complications, including human health. To tackle these issues, various processes are developing to waste as a feed to generate eco-friendly fuels. The biological production of fuels is considered to be more beneficial than physicochemical methods due to their environmentally friendly nature, high rate of conversion at ambient physiological conditions, and less energy-intensive. Among various biofuels, hydrogen (H₂) is considered as a wonderful due to high calorific value and generate water molecule as end product on the burning. The H₂ production from biowaste is demonstrated, and agri-food waste can be potentially used as a feedstock due to their high biodegradability over lignocellulosic-based biomass. Still, the H₂ production is uneconomical from biowaste in fuel competing market because of low yields and increased capital and operational expenses. Anaerobic digestion is widely used for waste management and the generation of value-added products. This article is highlighting the valorization of agri-food waste to biofuels in single (H₂) and two-stage bioprocesses of H₂ and CH₄ production.

Differential Multi-cellularity Is Required for the Adaptation for Bacillus licheniformis to Withstand Heavy Metals Toxicity

Bacillus licheniformis is a multi-metal tolerant bacteria, isolated from the paddy rhizospheric soil sample. Upon the multiple metal toxicity, B. licheniformis altered their phenotypic/morphogenesis. Here we examined the effects of cadmium (Cd2+), chromium (Cr2+), and mercury (Hg2+) on the morphogenesis of B. licheniformis in comparison to control. We found that the ability of bacteria to grow effectively in presence of cadmium and chromium comes at a cost of acquiring cell density-driven mobility and reformation of filamentous to donut shape respectively. In particular, when bacteria grown on mercury it showed the bacteriostatic strategy to resist mercury. Furthermore, the findings suggest a large variation in the production of exo-polysaccharides (EPS) and suggest the possible role of EPS in gaining resistance to cadmium and chromium. Together this study identifies previously unknown characteristics of B. licheniformis to participate in bioremediation and provides the first evidence on positive effects of bacterial morphogenesis and the involvement of EPS in bacteria to resisting metal toxicity.

Tocopherol and phytol possess anti-quorum sensing mediated anti-infective behavior against Vibrio campbellii in aquaculture: An in vitro and in vivo study

Phytocompounds have long been well recognized in medicine and pharmacy. The natural compounds are frequently utilized as the fundamental resource in the development of novel therapeutic agents to treat bacterial infections. The rapid emergence of bacterial infections, particularly caused by Vibrio species, is seen as a serious concern for the development of aquaculture industries, resulting in substantial economic losses throughout the world. Notably, the presence of Vibrio campbellii in aquatic environments will be extremely problematic, leading to significant mortality in aquatic organisms. As a result, novel therapeutic agents are desperately needed to treat such diseases. This is the first research to demonstrate that plant-derived active compounds, tocopherol and phytol, are effective against V. campbellii infection in tomato clownfish. The findings showed that tocopherol and phytol significantly decreased the production of biofilm and virulence factors such as hemolysin, protease, lipase, hydrophobic index, and swimming motility in V. campbellii, without influencing the bacterial growth. In vivo experiments with tomato clownfish also proved that these phytocompound treatments significantly increased the survival rates of infected fishes by hindering the intestinal colonization of V. campbellii in tomato clownfish. Further, the disease protection efficacy against the pathognomonic sign of V. campbellii-infection was verified by histopathological investigation of the gills, gut, and kidney. Altogether, the results suggest that tocopherol and phytol could be promising therapeutic agents for the treatment of V. campbellii infections in aquaculture.

Concomitant production of value-added products with polyhydroxyalkanoate (PHA) synthesis: A review

The concern over the damaging effects of petrochemical plastics has inspired innumerable researchers to synthesize green plastics. Polyhydroxyalkanoates (PHAs) are promising candidates as they are biodegradable and possess characteristics similar to conventional plastics. However, their large-scale production and market application still have a long way to go due to the high production cost associated. Approaches like using industrial wastes as substrates and developing green strategies for PHA extraction during downstream processing have been investigated to make the process more economical. Recently, PHA production cost was minimized by concomitant synthesis of other valuable bioproducts with PHA. Investigating these co-products and recovering them can also make the process circular bioeconomic. Therefore, the paper attempts to review the recent strategies for the simultaneous synthesis of value-added bioproducts with PHA together with the challenges and opportunities for their large-scale production and applications.

Hormetic dose-responses for silver antibacterial compounds, quorum sensing inhibitors, and their binary mixtures on bacterial resistance of Escherichia coli

Silver antibacterial compounds (SACs) and quorum sensing inhibitors (QSIs), as the potential antibiotic substitutes, have been recommended to prevent and treat microbial infections for the purpose of controlling the increasingly serious bacterial resistance induced by the abuse of antibiotics. However, there is little information regarding the resistance risk of these compounds, especially their mixtures. In this study, bacterial mutation and RP4 plasmid conjugative transfer among bacteria were used to characterize the bacterial endogenous and exogenous resistance, respectively. The effects of SACs (including silver nitrate (AgNO₃) and silver nanoparticle (AgNP)), QSIs, and their binary mixtures on the bacterial resistance were investigated via setting the frequency of mutation and conjugative transfer in Escherichia coli (E. coli) as the test endpoints. The results indicated that these two endpoints exhibited hormetic dose-responses to each treatment. Furthermore, the joint resistance actions between SACs and QSIs were all judged to be antagonism. Correlation analysis suggested that the promotion of the bacterial resistance in each treatment was closely related to its toxicity. It was speculated that AgNO₃ and AgNP might both release Ag⁺ ions to facilitate the E. coli resistance, while QSIs probably acted on LsrR and SdiA proteins to stimulate the bacterial mutation and accelerate the RP4 plasmid conjugative transfer, respectively. These findings imply that the bacteria may generate targeted stress response to the survival pressure from environmental compounds, displaying hormetic phenomenon in resistance-related test endpoints. This study provides a new insight into the resistance risk induced by SACs and QSIs, benefiting the environmental risk assessment of these compounds from the perspective of bacterial resistance.

Emerging applications of bacteria as antitumor agents

Bacteria are associated with the human body and colonize the gut, skin, and mucous membranes. These associations can be either symbiotic or pathogenic. In either case, bacteria derive more benefit from their host. The ability of bacteria to enter and survive within the human body can be exploited for human benefit. They can be used as a vehicle for delivering or producing bioactive molecules, such as toxins and lytic enzymes, and eventually for killing tumor cells. Clostridium and Salmonella have been shown to infect and survive within the human body, including in tumors. There is a need to develop genetic circuits, which enable bacterial cells to carry out the following activities: (i) escape the human immune system, (ii) invade tumors, (iii) multiply within the tumorous cells, (iv) produce toxins via quorum sensing at low cell densities, and (v) express suicide genes to undergo cell death or cell lysis after the tumor has been lysed. Thus, bacteria have the potential to be exploited as anticancer agents.

Hydrogen Dark Fermentation for Degradation of Solid and Liquid Food Waste

The constant increase in the amount of food waste accumulating in landfills and discharged into the water reservoirs causes environment pollution and threatens human health. Solid and liquid food wastes include fruit, vegetable, and meat residues, alcohol bard, and sewage from various food enterprises. These products contain high concentrations of biodegradable organic compounds and represent an inexpensive and renewable substrate for the hydrogen fermentation. The goal of the work was to study the efficiency of hydrogen obtaining and decomposition of solid and liquid food waste via fermentation by granular microbial preparation (GMP). The application of GMP improved the efficiency of the dark fermentation of food waste. Hydrogen yields reached 102 L/kg of solid waste and 2.3 L/L of liquid waste. The fermentation resulted in the 91-fold reduction in the weight of the solid waste, while the concentration of organics in the liquid waste decreased 3-fold. Our results demonstrated the potential of granular microbial preparations in the production of hydrogen via dark fermentation. Further development of this technology may help to clean up the environment and reduce the reliance on fossil fuels by generating green hydrogen via recycling of household and industrial organic wastes.

ClpC-Mediated Sporulation Regulation at Engulfment Stage in Bacillus anthracis

Bacterial sporulation is a conserved process utilized by members of Bacillus genus and Clostridium in response to stress such as nutrient or temperature. Sporulation initiation is triggered by stress signals perceived by bacterial cell that leads to shutdown of metabolic pathways of bacterial cells. The mechanism of sporulation involves a complex network that is regulated at various checkpoints to form the viable bacterial spore. Engulfment is one such check point that drives the required cellular rearrangement necessary for the spore assembly and is mediated by bacterial proteolytic machinery that involves association of various Clp ATPases and ClpP protease. The present study highlights the importance of degradation of an anti-sigma factor F, SpoIIAB by ClpCP proteolytic machinery playing a crucial role in culmination of engulfment process during the sporulation in Bacillus anthracis.

Challenges and Perspectives of Polyhydroxyalkanoate Production From Microalgae/Cyanobacteria and Bacteria as Microbial Factories: An Assessment of Hybrid Biological System

Polyhydroxyalkanoates (PHAs) are the biopolymer of choice if we look for a substitute of petroleum-based non-biodegradable plastics. Microbial production of PHAs as carbon reserves has been studied for decades and PHAs are gaining attention for a wide range of applications in various fields. Still, their uneconomical production is the major concern largely attributed to high cost of organic substrates for PHA producing heterotrophic bacteria. Therefore, microalgae/cyanobacteria, being photoautotrophic, prove to have an edge over heterotrophic bacteria. They have minimal metabolic requirements, such as inorganic nutrients (CO2, N, P, etc.) and light, and they can survive under adverse environmental conditions. PHA production under photoautotrophic conditions has been reported from cyanobacteria, the only candidate among prokaryotes, and few of the eukaryotic microalgae. However, an efficient cultivation system is still required for photoautotrophic PHA production to overcome the limitations associated with (1) stringent management of closed photobioreactors and (2) optimization of monoculture in open pond culture. Thus, a hybrid system is a necessity, involving the participation of microalgae/cyanobacteria and bacteria, i.e., both photoautotrophic and heterotrophic components having mutual interactive benefits for each other under different cultivation regime, e.g., mixotrophic, successive two modules, consortium based, etc. Along with this, further strategies like optimization of culture conditions (N, P, light exposure, CO2 dynamics, etc.), bioengineering, efficient downstream processes, and the application of mathematical/network modeling of metabolic pathways to improve PHA production are the key areas discussed here. Conclusively, this review aims to critically analyze cyanobacteria as PHA producers and proposes economically sustainable production of PHA from microbial autotrophs and heterotrophs in "hybrid biological system."

Biotechnological applications of Bacillus licheniformis

Bacillus licheniformis is a Gram positive spore-forming bacterial species of high biotechnological interest with numerous present and potential uses, including the production of bioactive compounds that are applied in a wide range of fields, such as aquaculture, agriculture, food, biomedicine, and pharmaceutical industries. Its use as an expression vector for the production of enzymes and other bioproducts is also gaining interest due to the availability of novel genetic manipulation tools. Furthermore, besides its widespread use as a probiotic, other biotechnological applications of B. licheniformis strains include: bioflocculation, biomineralization, biofuel production, bioremediation, and anti-biofilm activity. Although authorities have approved the use of B. licheniformis as a feed additive worldwide due to the absence of toxigenic potential, some probiotics containing this bacterium are considered unsafe due to the possible transference of antibiotic resistance genes. The wide variability in biological activities and genetic characteristics of this species makes it necessary to establish an exact protocol for describing the novel strains, in order to evaluate its biotechnological potential.

Epigenetic Regulation of Gut Microbial Dysbiosis

Microbiota inside the gut plays a vital role in maintaining human health. Microbial dysbiosis is associated with various complications leading to a range of diseases. Epigenetic changes enforced by various environmental and lifestyle factors lead to heritable modifications. These epigenetic modifications include DNA methylation, histone modifications, chromatin remodelling, and ribonucleic acid-based mechanisms. This review summarizes the impacts of environmental factors on the gut microbiome, epigenetic modifications, and their role in cardiovascular diseases.

Resistance risk induced by quorum sensing inhibitors and their combined use with antibiotics: Mechanism and its relationship with toxicity

The abuse of antibiotics has brought out serious bacterial resistance, which threatens the ecological environment and human health. Quorum sensing inhibitors (QSIs), as a new kind of potential antibiotic substitutes that are theoretically difficult to trigger bacterial resistance, are recommended to individually use or jointly use with traditional antibiotics. However, there are few studies on the resistance risk in the use of QSIs. In this study, the influence of QSIs alone or in combination with sulfonamides (SAs) on conjugative transfer and mutation of Escherichia coli (E. coli) was investigated to explore whether QSIs have the potential to induce bacterial resistance. The results show that QSIs may facilitate plasmid RP4 conjugative transfer by binding with SdiA protein to regulate pilus expression, and interact with LsrR protein to increase SOS gene expression, inducing gene mutation. The QSIs-SAs mixtures could promote plasmid RP4 conjugative transfer and mutation in E. coli, and the main joint effects are synergism and antagonism. Furthermore, there is a good correlation among conjugative transfer, mutation, and growth inhibition of QSIs-SAs to E. coli. It could be speculated that bacteria may delay cell division to provide sufficient energy and time for regulating conjugative transfer and mutation under the stress of QSIs and their combined exposure with antibiotics, which is essentially a balance between bacterial resistance and toxicity. This study provides a reference for the resistance risk assessment of QSIs and benefits the clinical application of QSIs.

Concrete Crack Restoration Using Bacterially Induced Calcium Metabolism

Concrete structures are prone to develop cracks and cause devastation. Repair and renovation are not enough to ensure complete eradication of crack development. The entire process is costly and laborious. The microbiologically induced calcium carbonated precipitation can be effective in restoring the cracks. The calcium-based nutrients along with specific bacterial strain have been used in the present investigation. The pellets of calcium as per Fourier transform infrared spectroscopy and energy-dispersive X-ray spectroscopy are deposited in the cracks of the concrete over a period of 7 days of incubation. The presence of bacteria in the calcium precipitates as demonstrated by scanning electron microscope provides adequate strength and adhering quality to the pellets. The effective filling of cracks is confirmed with the help ultrasonic pulse velocity test also. Since, elephantine heritage and high sky buildings have high maintenance costs, the use of present technique will cut down the cost and duration of restoration.

Supplementary Information

The online version of this article (10.1007/s12088-020-00916-0) contains supplementary material, which is available to authorized users.

Recent Advances in 3D Printing of Polyhydroxyalkanoates: A Review

In the 21st century, additive manufacturing technologies have gained in popularity mainly due to benefits such as rapid prototyping, faster small production runs, flexibility and space for innovations, non-complexity of the process and broad affordability. In order to meet diverse requirements that 3D models have to meet, it is necessary to develop new 3D printing technologies as well as processed materials. This review is focused on 3D printing technologies applicable for polyhydroxyalkanoates (PHAs). PHAs are thermoplastics regarded as a green alternative to petrochemical polymers. The 3D printing technologies presented as available for PHAs are selective laser sintering and fused deposition modeling. Stereolithography can also be applied provided that the molecular weight and functional end groups of the PHA are adjusted for photopolymerization. The chemical and physical properties primarily influence the processing of PHAs by 3D printing technologies. The intensive research for the fabrication of 3D objects based on PHA has been applied to fulfil criteria of rapid and customized prototyping mainly in the medical area.

Emerging Molecular Tools for Engineering Phytomicrobiome

Microbial plant interaction plays a major role in the sustainability of plants. The understanding of phytomicrobiome interactions enables the gene-editing tools for the construction of the microbial consortia. In this interaction, microbes share several common secondary metabolites and terpenoid metabolic pathways with their host plants that ensure a direct connection between the microbiome and associated plant metabolome. In this way, the CRISPR-mediated gene-editing tool provides an attractive approach to accomplish the creation of microbial consortia. On the other hand, the genetic manipulation of the host plant with the help of CRISPR-Cas9 can facilitate the characterization and identification of the genetic determinants. It leads to the enhancement of microbial capacity for more trait improvement. Many plant characteristics like phytovolatilization, phytoextraction, phytodesalination and phytodegradation are targeted by these approaches. Alternatively, chemical communications by PGPB are accomplished by the exchange of different signal molecules. For example, quorum-sensing is the way of the cell to cell communication in bacteria that lead to the detection of metabolites produced by pathogens during adverse conditions and also helpful in devising some tactics towards understanding plant immunity. Along with quorum-sensing, different volatile organic compounds and N-acyl homoserine lactones play a significant role in cell to cell communication by microbe to plant and among the plants respectively. Therefore, it is necessary to get details of all the significant approaches that are useful in exploring cell to cell communications. In this review, we have described gene-editing tools and the cell to cell communication process by quorum-sensing based signaling. These signaling processes via CRISPR- Cas9 mediated gene editing can improve the microbe-plant community in adverse climatic conditions.

Recent Clinical Trials on Natural Products and Traditional Chinese Medicine Combating the COVID-19

The novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causing potentially fatal coronavirus disease-19 (COVID-19), with a significant health and economic burden around the globe. Currently many clinical studies are undergoing but still there is no any specific approved therapy or drug established for effective treatment of COVID-19. This review aimed to analyses various clinical studies which have been registered in www.clinicaltrials.gov and http://www.chictr.org.cn were registered with natural plant-based medicines and Traditional Chinese medicine (TCM) for discovering effective treatment and prevention of COVID-19. Total 46 and 64 natural drug and TCM interventions were identified which mainly determined the preventive strategies and possible treatments for COVID-19 infection. We identified that most of the clinical trial undergoing on natural compound like heparin and vitamin C as therapeutic agents and immune boosters for against COVID-19. Traditional Chinese medicines and herbal medicines can be effectively used as a preventive therapy against COVID-19 and after successful clinical trials and these potential therapies can be promoted by countries around the world.

Effects of nutrient and oxygen limitation, salinity and type of salt on the accumulation of poly(3-hydroxybutyrate) in Bacillus megaterium uyuni S29 with sucrose as a carbon source

Due to high manufacturing costs, industrial production and application of bio-based polyhydroxyalkanoates (PHA) as bioplastics remain below the expected potential. Improving yields and productivities during biotechnological production will contribute to eliminating existing shortcomings and should therefore be a priority in process development with new strains and substrates. The present study investigates key parameters such as different nutrient and oxygen limitation strategies and the salinity and type of salt to determine their impact on growth and poly(3-hydroxybutyrate) (P(3HB)) formation behaviour of Bacillus megaterium. The oxygen-limiting conditions applied resulted in a longer process duration and were found to be least effective with regard to P(3HB) content in the biomass. A higher P(3HB) content of 0.42 g g^-1 was achieved when nitrogen was limited compared to 0.34 g g^-1 under phosphate-limiting conditions; however, sucrose utilization was better when phosphate was limited. Replacing NaCl by KCl and evaluating different concentrations ranging from 0.08 to 1.7 mol L^-1 in the process medium showed that B. megaterium has a higher tolerance to KCl as the biomass and P(3HB) formation was increased to 0.48 g g^-1 compared to 0.36 g g^-1. The combination of applying KCl instead of NaCl together with phosphorous limitation significantly increased P(3HB) productivity to 0.25 g L^-1 h^-1 compared to 0.09 g L^-1 h^-1. It can be concluded that the effective utilization of sucrose as a carbon source requires a combination of high nitrogen and low phosphorous concentration and a salt content of 0.6 g L^-1 KCl for P(3HB) production with B. megaterium uyuni S29.

Diet, Gut Microbiota and COVID-19

Worldwide, millions of individuals have been affected by the prevailing SARS-CoV-2. Therefore, a robust immune system remains indispensable, as an immunocompromised host status has proven to be fatal. In the absence of any specific antiviral drug/vaccine, COVID-19 related drug repurposing along with various other non-pharmacological measures coupled with lockdown have been employed to combat this infection. In this context, a plant based rich fiber diet, which happens to be consumed by a majority of the Indian population, appears to be advantageous, as it replenishes the host gut microbiota with beneficial microbes thereby leading to a symbiotic association conferring various health benefits to the host including enhanced immunity. Further, implementation of the lockdown which has proven to be a good non-pharmacological measure, seems to have resulted in consumption of home cooked healthy diet, thereby enriching the beneficial microflora in the gut, which might have resulted in better prognosis of COVID-19 patients in India in comparison to that observed in the western countries.

Bacilli-Mediated Degradation of Xenobiotic Compounds and Heavy Metals

Xenobiotic compounds are man-made compounds and widely used in dyes, drugs, pesticides, herbicides, insecticides, explosives, and other industrial chemicals. These compounds have been released into our soil and water due to anthropogenic activities and improper waste disposal practices and cause serious damage to aquatic and terrestrial ecosystems due to their toxic nature. The United States Environmental Protection Agency (USEPA) has listed several toxic substances as priority pollutants. Bacterial remediation is identified as an emerging technique to remove these substances from the environment. Many bacterial genera are actively involved in the degradation of toxic substances. Among the bacterial genera, the members of the genus Bacillus have a great potential to degrade or transform various toxic substances. Many Bacilli have been isolated and characterized by their ability to degrade or transform a wide range of compounds including both naturally occurring substances and xenobiotic compounds. This review describes the biodegradation potentials of Bacilli toward various toxic substances, including 4-chloro-2-nitrophenol, insecticides, pesticides, herbicides, explosives, drugs, polycyclic aromatic compounds, heavy metals, azo dyes, and aromatic acids. Besides, the advanced technologies used for bioremediation of environmental pollutants using Bacilli are also briefly described. This review will increase our understanding of Bacilli-mediated degradation of xenobiotic compounds and heavy metals.

Deploying Biomolecules as Anti-COVID-19 Agents

Severe acute respiratory syndrome coronavirus (SARS-CoV-2) known as COVID-19 has emerged as a major threat to human existence. COVID-19 seems to have undergone adaptive evolution through an intermediate host, most likely bats. The flu leads to severe pneumonia that causes respiratory and multi-organ failure. The absence of any known treatment procedures, drugs, or vaccines has created panic around the World. The need is to develop rapid testing kits, drugs and vaccines. However, these proposals are time-consuming processes. At present social distancing along with previously known traditional medicines can act as quick and short-term alternatives for treating this viral flu.

Genomic insights into the phylogeny of Bacillus strains and elucidation of their secondary metabolic potential

The genus Bacillus constitutes a plethora of species that have medical, environmental, and industrial applications. While genus Bacillus has been the focus of several studies where genomic data have been used to resolve many taxonomic issues, there still exist several ambiguities. Through the use of in-silico genome-based methods, we tried to resolve the taxonomic anomalies of a large set of Bacillus genomes (n = 178). We also proposed species names for uncharacterized strains and reported genome sequence of a novel isolate Bacillus sp. RL. In the hierarchical clustering on genome-to-genome distances, we observed 11 distinct monophyletic clusters and investigated the functional pathways annotated as the property of these clusters and core-gene content of the entire dataset. Thus, we were able to assert the possible outlier strains (n = 17) for this genus. Analyses of secondary metabolite potential of each strain helped us unravel still unexplored diversity for various biosynthetic genes.

Introducing the Newly Isolated Bacterium Aneurinibacillus sp. H1 as an Auspicious Thermophilic Producer of Various Polyhydroxyalkanoates (PHA) Copolymers-1. Isolation and Characterization of the Bacterium

Extremophilic microorganisms are considered being very promising candidates for biotechnological production of various products including polyhydroxyalkanoates (PHA). The aim of this work was to evaluate the PHA production potential of a novel PHA-producing thermophilic Gram-positive isolate Aneurinibacillus sp. H1. This organism was capable of efficient conversion of glycerol into poly(3-hydroxybutyrate) (P3HB), the homopolyester of 3-hydroxybutyrate (3HB). In flasks experiment, under optimal cultivation temperature of 45 °C, the P3HB content in biomass and P3HB titers reached 55.31% of cell dry mass and 2.03 g/L, respectively. Further, the isolate was capable of biosynthesis of PHA copolymers and terpolymers containing high molar fractions of 3-hydroxyvalerate (3HV) and 4-hydroxybutyrate (4HB). Especially 4HB contents in PHA were very high (up to 91 mol %) when 1,4-butanediol was used as a substrate. Based on these results, it can be stated that Aneurinibacillus sp. H1 is a very promising candidate for production of PHA with tailored material properties.

Proteome profile changes during poly-hydroxybutyrate intracellular mobilization in gram positive Bacillus cereus tsu1

BACKGROUND

Bacillus cereus is a bacterial species which grows efficiently on a wide range of carbon sources and accumulates biopolymer poly-hydroxybutyrate (PHB) up to 80% cell dry weight. PHB is an aliphatic polymer produced and stored intracellularly as a reservoir of carbon and energy, its mobilization is a key biological process for sporulation in Bacillus spp. Previously, B. cereus tsu1 was isolated and cultured on rapeseed cake substrate (RCS), with maximum of PHB accumulation reached within 12 h, and depleted after 48 h. Fore-spore and spore structure were observed after 24 h culture.

RESULTS

Quantitative proteomic analysis of B. cereus tsu1 identified 2952 quantifiable proteins, and 244 significantly changed proteins (SCPs) in the 24 h:12 h pair of samples, and 325 SCPs in the 48 h:12 h pair of samples. Based on gene ontology classification analysis, biological processes enriched only in the 24 h:12 h SCPs include purine nucleotide metabolism, protein folding, metal ion homeostasis, response to stress, carboxylic acid catabolism, and cellular amino acid catabolism. The 48 h:12 h SCPs were enriched into processes including carbohydrate metabolism, protein metabolism, oxidative phosphorylation, and formation of translation ternary structure. A key enzyme for PHB metabolism, poly(R)-hydroxyalkanoic acid synthase (PhaC, KGT44865) accumulated significantly higher in 12 h-culture. Sporulation related proteins SigF and SpoEII were significantly higher in 24 h-samples. Enzymes for nitrate respiration and fermentation accumulated to the highest abundance level in 48 h-culture.

CONCLUSIONS

Changes in proteome of B. cereus tsu1 during PHB intracellular mobilization were characterized in this study. The key enzyme PhaC for PHB synthesis increased significantly after 12 h-culture which supports the highest PHB accumulation at this time point. The protein abundance level of SpoIIE and SigF also increased, correlating with sporulation in 24 h-culture. Enzymes for nitrate respiration and fermentation were significantly induced in 48 h-culture which indicates the depletion of oxygen at this stage and carbon flow towards fermentative growth. Results from this study provide insights into proteome profile changes during PHB accumulation and reuse, which can be applied to achieve a higher PHB yield and to improve bacterial growth performance and stress resistance.

Inhibition of Microbial Quorum Sensing Mediated Virulence Factors by Pestalotiopsis sydowiana

Quorum sensing (QS)-mediated infections cause severe diseases in human beings. The control of infectious diseases by inhibiting QS using antipathogenic drugs is a promising approach as antibiotics are proving inefficient in treating these diseases. Marine fungal (Pestalotiopsis sydowiana PPR) extract was found to possess effective antipathogenic characteristics. The minimum inhibitory concentration (MIC) of the fungal extract against test pathogen Pseudomonas aeruginosa PAO1 was 1,000 μg/ml. Sub-MIC concentrations (250 and 500 μg/ml) of fungal extract reduced QS-regulated virulence phenotypes such as the production of pyocyanin, chitinase, protease, elastase, and staphylolytic activity in P. aeruginosa PAO1 by 84.15%, 73.15%, 67.37%, 62.37%, and 33.65%, respectively. Moreover, it also reduced the production of exopolysaccharides (74.99%), rhamnolipids (68.01%), and alginate (54.98%), and inhibited the biofilm formation of the bacteria by 90.54%. In silico analysis revealed that the metabolite of P. sydowiana PPR binds to the bacterial QS receptor proteins (LasR and RhlR) similar to their respective natural signaling molecules. Cyclo(-Leu-Pro) (CLP) and 4-Hydroxyphenylacetamide (4-HPA) were identified as potent bioactive compounds among the metabolites of P. sydowiana PPR using in silico approaches. The MIC values of CLP and 4-HPA against P. aeruginosa PAO1 were determined as 250 and 125 μg/ml, respectively. All the antivirulence assays were conducted at sub-MIC concentrations of CLP (125 μg/ml) and 4-HPA (62.5 μg/ml), which resulted in marked reduction in all the investigated virulence factors. This was further supported by gene expression studies. The findings suggest that the metabolites of P. sydowiana PPR can be employed as promising QS inhibitors that target pathogenic bacteria.

Waste based hydrogen production for circular bioeconomy: Current status and future directions

The present fossil fuel-based energy sector has led to significant industrial growth. On the other hand, the dependence on fossil fuels leads to adverse impact on the environment through releases of greenhouse gases. In this scenario, one possible substitute is biohydrogen, an eco-friendly energy carrier as high-energy produces. The substrates rich in organic compounds like organic waste/wastewater are very useful for improved hydrogen generation through the dark fermentation. Thus, this review article, initially, the status of biohydrogen production from organic waste and various strategies to enhance the process efficiency are concisely discussed. Then, the practical confines of biohydrogen processes are thoroughly discussed. Also, alternate routes such as multiple process integration approach by adopting biorefinery concept to increase overall process efficacy are considered to address industrial-level applications. To conclude, future perspectives besides with possible ways of transforming dark fermentation effluent to biofuels and biochemicals, which leads to circular bioeconomy, are discussed.

Solvent-Tolerant Acyltransferase from Bacillus sp. APB-6: Purification and Characterization

Amidase from Bacillus sp. APB-6 with very good acyltransferase activity was purified to homogeneity with a purification fold of 3.68 and 53.20% enzyme yield. The purified protein's subunit molecular mass was determined approximately 42 kDa. Hyperactivity of the enzyme was observed at pH 7.5 (150 mM, potassium-phosphate buffer) and 50 °C of incubation. An enhancement in activity up to 42% was recorded with ethylenediaminetetraacetic acid and dithiothreitol. The kinetic parameter K _m values for substrates: acetamide and hydroxylamine-hydrochloride were 73.0 and 153 mM, respectively. Further, the V _max for acyltransferase activity was 1667 U/mg of protein and the K _i for acetamide was calculated as 37.0 mM. The enzyme showed tolerance to various organic solvents (10%, v/v) and worked well in the biphasic reaction medium. The acyltransferase activity in presence of solvents i.e. biphasic medium may prove highly favorable for the transformation of hydrophobic amides, which otherwise is not possible in simple aqueous phase.