Polymer-based nanoparticles for oral insulin delivery: Revisited approaches

Interface/Dipole Polarized Antibiotics-Loaded Fe3O4/PB Nanoparticles for Non-Invasive Therapy of Osteomyelitis Under Medical Microwave Irradiation

Due to their poor light penetration, photothermal therapy and photodynamic therapy are ineffective in treating deep tissue infections, such as osteomyelitis caused by Staphylococcus aureus (S. aureus). Here, a microwave (MW)-responsive magnetic targeting composite system consisting of ferric oxide (Fe3O4)/Prussian blue (PB) nanoparticles, gentamicin (Gent), and biodegradable poly(lactic-co-glycolic acid) (PLGA) is reported. The PLGA/Fe3O4/PB/Gent complex is used in combination with MW thermal therapy (MTT), MW dynamic therapy (MDT), and chemotherapy (CT) to treat acute osteomyelitis infected with S. aureus-infected. The powerful antibacterial effect of the PLGA/Fe3O4/PB/Gent is determined by the synergistic effects of heat and reactive oxygen species (ROS) generation by the Fe3O4/PB nanoparticles under MW irradiation and the effective release of Gent at the infection site via magnetic targeting. The antibacterial mechanism of the PLGA/Fe3O4/PB/Gent under MW irradiation is analyzed using bacterial transcriptome RNA sequencing. The MW heat and ROS reduce the activity of the protein transporters on the bacterial membrane, along with the transport of various ions and the acceleration of phosphate metabolism, which can lead to increased permeability of the bacterial membrane, damage the ribosome and DNA, and accompany the internal protein efflux of the bacteria, thus effectively killing the bacteria.

Microparticles and nanoparticles-based approaches to improve oral treatment of Helicobacter pylori infection

Helicobacter pylori is a gram-negative, spiral-shaped, flagellated bacterium that colonizes the stomach of half the world's population. Helicobacter pylori infection causes pathologies of varying severity. Standard oral therapy fails in 15-20% since the barriers of the oral route decrease the bioavailability of antibiotics and the intrinsic factors of bacteria increase the rates of resistance. Nanoparticles and microparticles are promising strategies for drug delivery into the gastric mucosa and targeting H. pylori. The variety of building blocks creates systems with distinct colloidal, surface, and biological properties. These features improve drug-pathogen interactions, eliminate drug depletion and overuse, and enable the association of multiple actives combating H. pylori on several fronts. Nanoparticles and microparticles are successfully used to overcome the barriers of the oral route, physicochemical inconveniences, and lack of selectivity of current therapy. They have proven efficient in employing promising anti-H. pylori compounds whose limitation is oral route instability, such as some antibiotics and natural products. However, the current challenge is the applicability of these strategies in clinical practice. For this reason, strategies employing a rational design are necessary, including in the development of nano- and microsystems for the oral route.

Engineered nanoparticles in non-invasive insulin delivery for precision therapeutics of diabetes

Diabetes mellitus is a chronic disease leading to the death of millions a year across the world. Insulin is required for Type 1, Type 2, and gestational diabetic patients, however, there are various modes of insulin delivery out of which oral delivery is noninvasive and convenient. Moreover, factors like insulin degradation and poor intestinal absorption play a crucial role in its bioavailability and effectiveness. This review discusses various types of engineered nanoparticles used in-vitro, in-vivo, and ex-vivo insulin delivery along with their administration routes and physicochemical properties. Injectable insulin formulations, currently in use have certain limitations, leading to invasiveness, low patient compliance, causing inflammation, and side effects. Based on these drawbacks, this review emphasizes more on the non-invasive route, particularly oral delivery. The article is important because it focuses on how engineered nanoparticles can overcome the limitations of free therapeutics (drugs alone), navigate the barriers, and accomplish precision therapeutics in diabetes. In future, more drugs could be delivered with a similar strategy to cure various diseases and resolve challenges in drug delivery. This review significantly describes the role of various engineered nanoparticles in improving the bioavailability of insulin by protecting it from various barriers during non-invasive routes of delivery.

Preparation and Characterization of Chitosan Nanofiber: Kinetic Studies and Enhancement of Insulin Delivery System

Insulin-loaded nanofibers were prepared using chitosan as a natural polymer. The loaded insulin with polyethylene oxide was used for preparing monolayer batch S1. Nanofiber S1 was coated by seven layers of film on both sides to form batch S2 as a sandwich containing Layer A (CS, PEG and PEO) and Layer B (PEG and PEO) using electrospinning apparatus. SEM, TEM and FT-IR techniques were used to confirm the drug loading within the composite nanofibers. The in vitro activity that provided a sustained and controlled release of the drug from the nanofiber batch was studied at different pH values spectrophotometrically using a dialysis method. In batches S1 and S2, the release of insulin from nanofiber proceeds via burst release necessary to produce the desired therapeutic activity, followed by slow step. The rate and the percentage release of insulin in batch S2 are found to be higher at all pH values.

Polylactic Glycolic Acid-Mediated Delivery of Plectasin Derivative NZ2114 in Staphylococcus epidermidis Biofilms

Antimicrobial peptides (AMPs) are antibiotic candidates; however, their instability and protease susceptibility limit clinical applications. In this study, the polylactic acid-glycolic acid (PLGA)-polyvinyl alcohol (PVA) drug delivery system was screened by orthogonal design using the double emulsion-solvent evaporation method. NZ2114 nanoparticles (NZ2114-NPs) displayed favorable physicochemical properties with a particle size of 178.11 ± 5.23 nm, polydispersity index (PDI) of 0.108 ± 0.10, ζ potential of 4.78 ± 0.67 mV, actual drug-loading rate of 4.07 ± 0.37%, encapsulation rate of 81.46 ± 7.42% and cumulative release rate of 67.75% (120 h) in PBS. The results showed that PLGA encapsulation increased HaCaT cell viability by 20%, peptide retention in 50% serum by 24.12%, and trypsin tolerance by 4.24-fold. Meanwhile, in vitro antimicrobial assays showed that NZ2114-NPs had high inhibitory activity against Staphylococcus epidermidis (S. epidermidis) (4-8 μg/mL). Colony counting and confocal laser scanning microscopy (CLSM) confirmed that NZ2114-NPs were effective in reducing the biofilm thickness and bacterial population of S. epidermidis G4 with a 99% bactericidal rate of persister bacteria, which was significantly better than that of free NZ2114. In conclusion, the results demonstrated that PLGA nanoparticles can be used as a reliable NZ2114 delivery system for the treatment of biofilm infections caused by S. epidermidis.

Recent advances in oral insulin delivery technologies

With the rise in diabetes mellitus cases worldwide, oral delivery of insulin is preferred over subcutaneous insulin administration due to its good patient compliance and non-invasiveness, simplicity, and versatility. However, oral insulin delivery is hampered by various gastrointestinal barriers that result in low drug bioavailability and insufficient therapeutic efficiency. Numerous strategies have been developed to overcome these barriers and increase the bioavailability of oral insulin. Yet, no commercial oral insulin product is available to address all clinical hurdles because of various substantial obstacles related to the structural organization and physiological function of the gastrointestinal tract. Herein, we discussed the significant physiological barriers (including chemical, enzymatic, and physical barriers) that hinder the transportation and absorption of orally delivered insulin. Then, we showcased recent significant and innovative advances in oral insulin delivery technologies. Finally, we concluded the review with remarks on future perspectives on oral insulin delivery technologies and potential challenges for forthcoming clinical translation of oral insulin delivery technologies.

Polymer Delivery Systems for Long-Acting Antiretroviral Drugs

The success of long-acting (LA) drug delivery systems (DDSs) is linked to their biocompatible polymers. These are used for extended therapeutic release. For treatment or prevention of human immune deficiency virus type one (HIV-1) infection, LA DDSs hold promise for improved regimen adherence and reduced toxicities. Current examples include Cabenuva, Apretude, and Sunlenca. Each is safe and effective. Alternative promising DDSs include implants, prodrugs, vaginal rings, and microarray patches. Each can further meet patients' needs. We posit that the physicochemical properties of the formulation chemical design can optimize drug release profiles. We posit that the strategic design of LA DDS polymers will further improve controlled drug release to simplify dosing schedules and improve regimen adherence.

Potential lipid-based strategies of amphotericin B designed for oral administration in clinical application

Amphotericin B (AmB) is regarded as a first-line therapy against life-threatening invasive fungal infections. Due to its poor oral bioavailability, AmB is restricted to intravenous administration in clinical practice. As science continues to move forward, two lipid-based formulations are successfully developed for oral AmB administration, currently undergoing phase I clinical trials. Encouragingly, lipid-AmB conjugates with emulsions also exhibit a better bioavailability, which may be another strategy to design oral AmB formulation in clinical practice. Thus, this review mainly focused on the two lipid-based formulations in clinical trials, and discussed the potential perspectives of AmB-lipid conjugation-loaded nanocochleates and emulsions.

Double layer spherical nanoparticles with hyaluronic acid coating to enhance oral delivery of exenatide in T2DM rats

Soybean phospholipid was used as an amphiphilic material to form reverse micelles (RMs) in medium glycerol monolinoleate (Maisine) with Exenatide (EXT.) encapsulated in the polar core formed by the hydrophilic part of phospholipid. Cremopher RH40 and caprylocaproyl macrogol-8 glycerides EP/caprylocaproyl polyoxyl-8 glycerides NF (Labrasol) were added as surfactants to prepare reverse micelles-self emulsifying drug delivery system (RMs-SEDDS). On this basis, oil in water (O/W) emulsion was further prepared. By adding DOTAP, the surface of the emulsion was positively charged. Finally, hyaluronic acid wrapping in the outermost layer by electrostatic adsorption and reverse micelles-O/W-sodium hyaluronate (RMs-O/W-HA) nanoparticles containing Exenatide were prepared. RMs-SEDDS was spherical with an average particle size of 213.6 nm and RMs-O/W-HA was double-layered spherical nanoparticle with an average particle size of 309.2 nm. HA coating enhanced the adhesion of nanoparticles (NPs), and RMs-O/W-HA increased cellular uptake through CD44-mediated endocytosis. Pharmacodynamics results showed that RMs-SEDDS and RMs-O/W-HA could reduce blood glucose in type 2 diabetic rats, protect pancreatic β cells to a certain extent, and relieve insulin resistance and hyperlipemia complications with good safety.

Biodegradable Nanogels for Dermal Applications: An Insight

Abstract:

Biodegradable nanogels in the biomedical field are emerging vehicles comprising dispersions of hydrogel nanoparticles having 3D crosslinked polymeric networks. Nanogels show distinguished characteristics including their homogeneity, adjustable size, low toxicity, stability in serum, stimuli-responsiveness (pH, temperature, enzymes, light, etc.), and relatively good drug encapsulation capability. Due to these characteristics, nanogels are referred to as nextgeneration drug delivery systems and are suggested as promising carriers for dermal applications. The site-specific delivery of drugs with effective therapeutic effects is crucial in transdermal drug delivery. The nanogels made from biodegradable polymers can show external stimuliresponsiveness which results in a change in gel volume, water content, colloidal stability, mechanical strength, and other physical and chemical properties, thus improving the site-specific topical drug delivery. This review provides insight into the advances in development, limitations, and therapeutic significance of nanogels formulations. It also highlights the process of release of drugs in response to external stimuli, various biodegradable polymers in the formulation of the nanogels, and dermal applications of nanogels and their role in imaging, anti‐inflammatory therapy, antifungal and antimicrobial therapy, anti‐psoriatic therapy, and ocular and protein/peptide drug delivery.

The crossroad of nanovesicles and oral delivery of insulin

INTRODUCTION

Diabetes mellitus is one of the challenging health problems worldwide. Multiple daily subcutaneous injection of insulin causes poor compliance in patients. Development of efficient oral formulations to improve the quality of life of such patients has been an important goal in pharmaceutical industry. However, due to serious issues such as low bioavailability and instability, it has not been achieved yet.

AREAS COVERED

Due to functional properties of the vesicles and the fact that hepatic-directed vesicles of insulin could reach the clinical phases, we focused on three main vesicular delivery systems for oral delivery of insulin: liposomes, niosomes, and polymersomes. Recent papers were thoroughly discussed to provide a broad overview of such oral delivery systems.

EXPERT OPINION

Although conventional liposomes are unstable in the presence of bile salts, their further modifications such as surface coating could increase their stability in the GI tract. Bilosomes showed good flexibility and stability in GI fluids. Also, niosomes were stable, but they could not induce significant hypoglycemia in animal studies. Although polymersomes were effective, they are expensive and there are some issues about their safety and industrial scale-up. Also, we believe that other modifications such as addition of a targeting agent or surface coating of the vesicles could significantly increase the bioavailability of insulin-loaded vesicles.

Biomedical applications of PLGA nanoparticles in nanomedicine: advances in drug delivery systems and cancer therapy

INTRODUCTION

During the last decades, the ever-increasing proportion of patients with cancer has been led to serious concerns worldwide. Therefore, the development and use of novel pharmaceuticals, like nanoparticles (NPs)-based drug delivery systems (DDSs), can be potentially effective in cancer therapy.

AREA COVERED

Poly lactic-co-glycolic acid (PLGA) NPs, as a kind of bioavailable, biocompatible, and biodegradable polymers, have approved by the Food and Drug Administration (FDA) for some biomedical and pharmaceutical applications. PLGA is comprised of lactic acid (LA) and glycolic acid (GA) and their ratio could be controlled during various syntheses and preparation approaches. LA/GA ratio determines the stability and degradation time of PLGA; lower content of GA results in fast degradation. There are several approaches for preparing PLGA NPs that can affect their various aspects, such as size, solubility, stability, drug loading, pharmacokinetics, and pharmacodynamics, and so on.

EXPERT OPINION

These NPs have indicated the controlled and sustained drug release in the cancer site and can use in passive and active (via surface modification) DDSs. This review aims to provide an overview of PLGA NPs, their preparation approach and physicochemical aspects, drug release mechanism and the cellular fate, DDSs for efficient cancer therapy, and status in the pharmaceutical industry and nanomedicine.

Oral insulin delivery: Barriers, strategies, and formulation approaches: A comprehensive review

Diabetes Mellitus is characterized by a hyperglycemic condition which can either be caused by the destruction of the beta cells or by the resistance developed against insulin in the cells. Insulin is a peptide hormone that regulates the metabolism of carbohydrates, proteins, and fats. Type 1 Diabetes Mellitus needs the use of Insulin for efficient management. However invasive methods of administration may lead to reduced adherence by the patients. Hence there is a need for a non-invasive method of administration. Oral Insulin has several merits over the conventional method including patient compliance, and reduced cost, and it also mimics endogenous insulin and hence reaches the liver by the portal vein at a higher concentration and thereby showing improved efficiency. However oral Insulin must pass through several barriers in the gastrointestinal tract. Some strategies that could be utilized to bypass these barriers include the use of permeation enhancers, absorption enhancers, use of suitable polymers, use of suitable carriers, and other agents. Several formulation types have been explored for the oral delivery of Insulin like hydrogels, capsules, tablets, and patches which have been described briefly by the article. A lot of attempts have been made for developing oral insulin delivery however none of them have been commercialized due to numerous shortcomings. Currently, there are several formulations from the companies that are still in the clinical phase, the success or failure of some is yet to be seen in the future.

Multi-responsive starch-based nanocapsules for colon-targeting delivery of peptides: In vitro and in vivo evaluation

Colon-targeting delivery of insulin is surging great interests in revolutionizing diabetes. Herein, insulin-loaded starch-based nanocapsules developed by layer-by-layer self-assembly technology were rationally structured. Interactions between starches and the structural changes of the nanocapsules were unraveled to understand in vitro and in vivo insulin release properties. By increasing the deposition layers of starches, the structural compactness of nanocapsules increased and in turn retarded insulin release in the upper gastrointestinal tract. Spherical nanocapsules deposited at least five layers of starches could deliver insulin to the colon in a high efficiency according to the in vitro and in vivo insulin release performance. The underlying mechanism of the insulin colon-targeting release should ascribe to the suitable changes in compactness of the nanocapsules and the interactions between deposited starches after multi-response to the changes in pH, time and enzymes in gastrointestinal tract. Starch molecules interacted with each other much stronger at the intestine than that at the colon, which guaranteed a compact structure in the intestine but a loose structure in the colon for the colon-targeting nanocapsules. It suggested that rather than controlling the deposition layer of the nanocapsules, controlling the interaction between starches could also regulate the structures of the nanocapsules for colon-targeting delivery system.

Polymer-Based Nanostructures for Pancreatic Beta-Cell Imaging and Non-Invasive Treatment of Diabetes

Diabetes poses major economic, social, and public health challenges in all countries worldwide. Besides cardiovascular disease and microangiopathy, diabetes is a leading cause of foot ulcers and lower limb amputations. With the continued rise of diabetes prevalence, it is expected that the future burden of diabetes complications, early mortality, and disabilities will increase. The diabetes epidemic is partly caused by the current lack of clinical imaging diagnostic tools, the timely monitoring of insulin secretion and insulin-expressing cell mass (beta (β)-cells), and the lack of patients' adherence to treatment, because some drugs are not tolerated or invasively administrated. In addition to this, there is a lack of efficient topical treatment capable of stopping the progression of disabilities, in particular for treating foot ulcers. In this context, polymer-based nanostructures garnered significant interest due to their tunable physicochemical characteristics, rich diversity, and biocompatibility. This review article emphasizes the last advances and discusses the prospects in the use of polymeric materials as nanocarriers for β-cell imaging and non-invasive drug delivery of insulin and antidiabetic drugs in the management of blood glucose and foot ulcers.

Anti-COVID-19 Credentials of Chitosan Composites and Derivatives: Future Scope?

Chitosan derivatives and composites are the next generation polymers for biomedical applications. With their humble origins from the second most abundant naturally available polymer chitin, chitosan is currently one of the most promising polymer systems, with wide biological applications. This current review gives a bird's eye view of the antimicrobial applications of chitosan composites and derivatives. The antiviral activity and the mechanisms behind the inhibitory activity of these components have been reviewed. Specifically, the anti-COVID-19 aspects of chitosan composites and their derivatives have been compiled from the existing scattered reports and presented. Defeating COVID-19 is the battle of this century, and the chitosan derivative-based combat strategies naturally become very attractive. The challenges ahead and future recommendations have been addressed.

pH-Responsive and Mucoadhesive Nanoparticles for Enhanced Oral Insulin Delivery: The Effect of Hyaluronic Acid with Different Molecular Weights

Drug degradation at low pH and rapid clearance from intestinal absorption sites are the main factors limiting the development of oral macromolecular delivery systems. Based on the pH responsiveness and mucosal adhesion of hyaluronic acid (HA) and poly[2-(dimethylamino)ethyl methacrylate] (PDM), we prepared three HA–PDM nano-delivery systems loaded with insulin (INS) using three different molecular weights (MW) of HA (L, M, H), respectively. The three types of nanoparticles (L/H/M-HA–PDM–INS) had uniform particle sizes and negatively charged surfaces. The optimal drug loadings of the L-HA–PDM–INS, M-HA–PDM–INS, H-HA–PDM–INS were 8.69 ± 0.94%, 9.11 ± 1.03%, and 10.61 ± 1.16% (w/w), respectively. The structural characteristics of HA–PDM–INS were determined using FT-IR, and the effect of the MW of HA on the properties of HA–PDM–INS was investigated. The release of INS from H-HA–PDM–INS was 22.01 ± 3.84% at pH 1.2 and 63.23 ± 4.10% at pH 7.4. The protective ability of HA–PDM–INS with different MW against INS was verified by circular dichroism spectroscopy and protease resistance experiments. H-HA–PDM–INS retained 45.67 ± 5.03% INS at pH 1.2 at 2 h. The biocompatibility of HA–PDM–INS, regardless of the MW of HA, was demonstrated using CCK-8 and live–dead cell staining. Compared with the INS solution, the transport efficiencies of L-HA–PDM–INS, M-HA–PDM–INS, and H-HA–PDM–INS increased 4.16, 3.81, and 3.10 times, respectively. In vivo pharmacodynamic and pharmacokinetic studies were performed in diabetic rats following oral administration. H-HA–PDM–INS exhibited an effective hypoglycemic effect over a long period, with relative bioavailability of 14.62%. In conclusion, these simple, environmentally friendly, pH-responsive, and mucoadhesive nanoparticles have the potential for industrial development. This study provides preliminary data support for oral INS delivery.

Design and in vitro/in vivo Evaluation of Polyelectrolyte Complex Nanoparticles Filled in Enteric-Coated Capsules for Oral Delivery of Insulin

Insulin is one of the most important drugs in the treatment of diabetes. There is an increasing interest in the oral administration of insulin as it mimics the physiological pathway and potentially reduces the side effects associated with subcutaneous injection. Therefore, insulin-loaded polyelectrolyte complex (PEC) nanoparticles were prepared by the ionic cross-linking method using protamine sulfate as the polycationic and sodium alginate as the anionic polymer. Taguchi experimental design was used for the optimization of nanoparticles by varying the concentration of sodium alginate, the mass ratio of sodium alginate to protamine, and the amount of insulin. The optimized nanoparticle formulation was used for further in vitro characterization. Then, insulin-loaded PEC nanoparticles were placed in hard gelatin capsules and the capsules were enteric-coated by Eudragit L100-55 (PEC-eCAPs). Hypoglycemic effects PEC-eCAPs were determined in vivo by oral administration to diabetic rats. Furthermore, in vivo distribution of PEC nanoparticles was evaluated by fluorescein isothiocyanate (FITC) labelled nanoparticles. The experimental design led to nanoparticles with a size of 194.4 nm and a polydispersity index (PDI) of 0.31. The encapsulation efficiency (EE) was calculated as 95.96%. In vivo studies showed that PEC-eCAPs significantly reduced the blood glucose level of rats at the 8^th hour compared to oral insulin solution. It was concluded that PEC nanoparticles loaded into enteric-coated hard gelatin capsules provide a promising delivery system for the oral administration of insulin.

Modification and Functionalization of Polymers for Targeting to Bone Cancer and Bone Regeneration

Bone is one of the most complex, inaccessible body structures, responsible for calcium storage and haematopoiesis. The second highest cause of death across the world is cancer. Amongst all the types of cancers, bone cancer treatment modalities are limited due to the structural complexity and inaccessibility of bones. The worldwide incidence of bone diseases and bone defects due to cancer, infection, trauma, age-related bone degeneration is increasing. Currently different conventional therapies are available for bone cancer such as chemotherapy, surgery and radiotherapy, but they have several disadvantages associated with them. Nanomedicine is being extensively researched as viable therapeutics to mitigate drug resistance in cancer therapy and promote bone regeneration. Several natural polymers such as chitosan, dextran, alginate, hyaluronic acid, and synthetic polymers like polyglycolic acid, poly(lactic-co-glycolic acid), polycaprolactone are investigated for their application in nanomedicine for bone cancer treatment and bone regeneration. Nanocarriers have shown promising results in preclinical experimental studies. However, they still face a major drawback of inadequate targetability. The paper summarizes the status of research and the progress made so far in modifications and functionalization of natural polymers for improving their site specificity and targeting for effective treatment of bone cancer and enhancing bone regeneration.

Tailoring Apixaban in Nanostructured Lipid Carrier Enhancing Its Oral Bioavailability and Anticoagulant Activity

Apixaban (Apx), an oral anticoagulant drug, is a direct factor Xa inhibitor for the prophylaxis against venous thromboembolism. Apx has limited oral bioavailability and poor water solubility. The goal of this study was to improve the formulation of an Apx-loaded nanostructured lipid carrier (NLC) to increase its bioavailability and effectiveness. As solid lipid, liquid lipid, hydrophilic, and lipophilic stabilizers, stearic acid, oleic acid, Tween 80, and lecithin were used, respectively. Utilizing Box-Behnken design, the effects of three factors on NLC particle size (Y1), zeta potential (Y2), and entrapment efficiency percent (Y3) were examined and optimized. The optimized formula was prepared, characterized, morphologically studied, and pharmacokinetically and pharmacodynamically assessed. The observed responses of the optimized Apx formula were 315.2 nm, -43.4 mV, and 89.84% for Y1, Y2, and Y3, respectively. Electron microscopy revealed the homogenous spherical shape of the NLC particles. The in vivo pharmacokinetic study conducted in male Wistar rats displayed an increase in AUC and Cmax by 8 and 2.67 folds, respectively, compared to oral Apx suspension. Moreover, the half-life was increased by 1.94 folds, and clearance was diminished by about 8 folds, which makes the NLC formula a promising sustained release system. Interestingly, the pharmacodynamic results displayed the superior effect of the optimized formula over the drug suspension with prolongation in the cuticle bleeding time. Moreover, both prothrombin time and activated partial thromboplastin time are significantly increased. So, incorporating Apx in an NLC formula significantly enhanced its oral bioavailability and pharmacodynamic activity.

Solid lipid nanoparticles: a promising tool for insulin delivery

INTRODUCTION

Insulin plays a critical role in metabolism modulation including carbohydrate, lipid, and protein metabolism. There is room to improve insulin delivery but optimizing the best carrier remains challenging. Traditional and conventional approaches for insulin delivery do not emulate the normal fate of insulin release in the body. Despite extensive research attempts to overcome this and other challenges, the goal of achieving optimal insulin delivery that emulates the natural system remains unresolved.

AREAS COVERED

Solid Lipid Nanoparticles (SLNs) may provide a solution, because they are nontoxic, biocompatible, and straightforward to formulate thus providing a promising platform for achieving targeted and controlled delivery of various therapeutic agents. This review aims to provide an overview on the suitability and application of SLNs for insulin delivery. A special emphasis is placed on the biopharmaceutical aspects of insulin loaded SLNs which have not been explored in detail to date.

EXPERT OPINION

SLNs have proven to be safe and versatile drug delivery systems suitable for insulin delivery and capable of improving the efficacy and pharmacokinetic profile of encapsulated insulin. There is still some work to be done to fully explore SLNs' true potential as drug delivery and specifically insulin delivery vehicles suitable for clinical use.

Evaluation of the gut microbiome alterations in healthy rats after dietary exposure to different synthetic ZnO nanoparticles

AIMS

Although synthetic ZnO nanoparticles (Nano-ZnO) as an alternative of ZnO compounds have been extensively used such as in livestock production, the increased consuming of Nano-ZnO has raised considerable concerns in environmental pollution and public health. Because of the low digestion of Nano-ZnO, the systematic studies on their interactions with gut microbiota remain to be clarified.

MATERIALS AND METHODS

Nano-ZnOs were prepared by co-precipitation (ZnO-cp) and high temperature thermal decomposition (ZnO-td) as well as the commercial type (ZnO-s). Transmission electron microscopy (TEM) was used to monitor the morphology of Nano-ZnO. CCK-8 assay was used for cytotoxicity evaluation. Total antioxidant capacity assay, total superoxide dismutase assay, and lipid peroxidation assay were used to evaluate oxidative states of rats. 16S rRNA was used to study the impact of Nano-ZnO on the rat gut microbiome.

KEY FINDINGS

Both ZnO-cp and ZnO-td exhibited low cytotoxicity while ZnO-s and ZnO-td exhibited prominent antibacterial activities. After a 28-day oral feeding with 1000 mg/kg Zn at dietary dosage, ZnO-s showed slight effect on causing oxidative stress in comparison with that of ZnO-cp and ZnO-td. Results of 16S rRNA sequencing analysis indicated that ZnO-td as a promising short-term nano-supplement can increase probiotics abundances like strains belonged to the genus Lactobacillus and provide the antipathogenic effect.

SIGNIFICANCE

The results of the gut microbiome alteration by synthetic Nano-ZnO not only provide solution to exposure monitoring of environmental hazard, but rationalize their large-scale manufacture as alternative additive in the food chain.

Nanotechnology for research and treatment of the intestine

The establishment of intestinal in vitro models is crucial for elucidating intestinal cell-microbe intrinsic connections and interaction mechanisms to advance normalized intestinal diagnosis and precision therapy. This review discusses the application of nanomaterials in mucosal therapy and mechanism research in combination with the study of nanoscaffold in vitro models of the gut. By reviewing the original properties of nanomaterials synthesized by different physicochemical principles and modifying the original properties, the contribution of nanomaterials to solving the problems of short survival period, low cell differentiation rate, and poor reduction ability in traditional intestinal models is explored. According to nanomaterials’ different diagnostic mediators and therapeutic targets, the current diagnostic principles in inflammatory bowel disease, intestinal cancer, and other diseases are summarized inductively. In addition, the mechanism of action of nanomedicines in repairing mucosa, inhibiting inflammation, and alleviating the disease process is also discussed. Through such systematic elaboration, it offers a basis for nanomaterials to help advance in vitro research on the intestine and provide precision treatments in the clinic.

Construction of a double-responsive modified guar gum nanoparticles and its application in oral insulin administration

The use of intelligent insulin delivery systems has become more important for treating diabetes. In this study, a dual-responsive oral insulin delivery nanocarrier that responds to glucose and pH has been developed. First, the oleic acid hydrophobic modified guar gum (GG) was synthesized by the esterification reaction, and the γ-polyglutamic acid (γ-PGA) was coupled with GG by the amidation reaction. The obtained pH-responsive copolymer (γ-PGA-GG) was cross-linked by concanavalin A to obtain pH/glucose dual-responsive nanocarriers, and insulin was effectively loaded into the dual-responsive nanocarriers. The insulin-loaded nanoparticles can achieve effective pH and glucose responses, releasing insulin on demand. In vitro and in vivo studies demonstrated the dual-responsive nanoparticles can protect insulin against the pH changes in the digestive tract and deliver insulin into the body to exert a hypoglycemic effect. Moreover, the dual-responsive nanoparticles have significant potential to be employed for oral insulin delivery.

Effect of a Novel Hybrid Nanocomposite of Cisplatin-Chitosan on Induced Tissue Injury as a Suggested Drug by Reducing Cisplatin Side Effects

The self-assembly of cisplatin (Cis-Pt) and chitosan nanoparticles (Cs NPs) has been synthesized and characterized successfully by different analyses and techniques, such as scanning electron microscopy, ultraviolet-visible spectrophotometry, and Fourier transform infrared spectroscopy. The efficiency of loading Cis-Pt on Cs NPs for decreasing the side effects of Cis-Pt by loading it on Cs NP surface was revealed through histopathological and physiological measurements for the liver, testis, and kidney cells. Self-assembly hybrid nanocomposite (Cis-Pt@Cs) could improve spermatogenic cells, seminiferous tubules, and Leydig cells in the interstitial tissue. Kidney examination showed intact glomeruli with a mild increase in capsular space in addition to the intact renal tubular epithelial lining, and liver findings showed improvement in dilation and congestion of the central vein besides mild dilation of blood sinusoids in addition to a mild degree of hepatocyte vacuolation. The serum levels of hepatic, renal, and testicular marker analysis were measured, where Cis-Pt increased the serum levels of alanine aminotransferase, aspartate aminotransferase activity, urea, creatinine, and decreased testosterone levels, while synthesized self-assembly appeared normalized levels. From the results, the self-assembly hybrid nanocomposite decreases and improves the side effects of Cis-Pt.

Resveratrol and resveratrol nano-delivery systems in the treatment of inflammatory bowel disease

Inflammatory bowel disease (IBD) is a chronic disorder associated with the inflammation in the digestive tract. The exact cause of IBD is unknown; nevertheless, in IBD, the homeostasis of key regulatory factors involved in intestinal immunity has been documented to be disrupted. Despite the lack of a viable treatment for IBD, synthetic drugs and monoclonal antibodies are currently used to treat it. However, these treatments have side effects, and the high relapse rate limits their usage. Dietary polyphenols constitute a great variety of compounds and have shown an array of biological properties. Resveratrol is a natural polyphenol found in grapevines and berries. The therapeutic ability of resveratrol against IBD is amply demonstrated in many in vivo studies. Resveratrol can interact with several molecular targets (Nf-kB, SIRT1, mTOR, HIF-1α, miRNAs, and TNF-α) and effectively prevent/ alleviate IBD symptoms with promising results. Although resveratrol has profound anti-inflammatory properties against IBD, its therapeutic employment is limited due to its low water solubility, less chemical stability, less bioavailability, and rapid metabolism in vivo. Hence, resveratrol encapsulation using different carries and its controlled release has become a promising strategy to overcome limitations. Herein, we meticulously review, talk-over the anti-inflammatory effect and mechanisms of resveratrol in IBD. We further provide the latest information on resveratrol formulations and nano-delivery systems used in oral delivery of resveratrol for the treatment of IBD and offer our view on future research on resveratrol in IBD treatment.

Multi-functional self-assembly nanoparticles originating from small molecule natural product for oral insulin delivery through modulating tight junctions

Background

Oral administration of insulin (INS) could be absorbed into systemic circulation only if the carrier protected it from the hostile gastrointestinal conditions. However, traditional macromolecular carriers have not totally overcome challenges in addressing these biological barriers.

Result

In this study, inspired by small molecule natural products (SMNPs), we demonstrate the multi-functional self-assembly nanoparticles (BA-Al NPs) originating from baicalin (BA) and AlCl₃ through coordination bonds and hydrogen bonds. As a novel carrier for oral insulin delivery (INS@BA-Al NPs), it displayed effective capacity in pH stimuli-responsive insulin release, intestinal mucoadhesion and transepithelial absorption enhance. Meanwhile, BA improved the paracellular permeability for insulin absorption, because of its downregulation at both mRNA and protein level on internal tight junction proteins. In vivo experiments exhibited remarkable bioavailability of INS and an ideal glucose homeostasis in the type I diabetic rat model.

Conclusion

This study offers a novel frontier of multi-functional carriers based on SMNPs with self-assembly character and bioactivity, which could be a promising strategy for diabetes therapy.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01260-9.

Emerging Theranostic Nanomaterials in Diabetes and Its Complications

Diabetes mellitus (DM) refers to a group of metabolic disorders that are characterized by hyperglycemia. Oral subcutaneously administered antidiabetic drugs such as insulin, glipalamide, and metformin can temporarily balance blood sugar levels, however, long-term administration of these therapies is associated with undesirable side effects on the kidney and liver. In addition, due to overproduction of reactive oxygen species and hyperglycemia-induced macrovascular system damage, diabetics have an increased risk of complications. Fortunately, recent advances in nanomaterials have provided new opportunities for diabetes therapy and diagnosis. This review provides a panoramic overview of the current nanomaterials for the detection of diabetic biomarkers and diabetes treatment. Apart from diabetic sensing mechanisms and antidiabetic activities, the applications of these bioengineered nanoparticles for preventing several diabetic complications are elucidated. This review provides an overall perspective in this field, including current challenges and future trends, which may be helpful in informing the development of novel nanomaterials with new functions and properties for diabetes diagnosis and therapy.

Zein-Based Nanoparticles as Oral Carriers for Insulin Delivery

Zein, the major storage protein from corn, has a GRAS (Generally Regarded as Safe) status and may be easily transformed into nanoparticles, offering significant payloads for protein materials without affecting their stability. In this work, the capability of bare zein nanoparticles (mucoadhesive) and nanoparticles coated with poly(ethylene glycol) (mucus-permeating) was evaluated as oral carriers of insulin (I-NP and I-NP-PEG, respectively). Both nanocarriers displayed sizes of around 270 nm, insulin payloads close to 80 µg/mg and did not induce cytotoxic effects in Caco-2 and HT29-MTX cell lines. In Caenorhabditis elegans, where insulin decreases fat storage, I-NP-PEG induced a higher reduction in the fat content than I-NP and slightly lower than the control (Orlistat). In diabetic rats, nanoparticles induced a potent hypoglycemic effect and achieved an oral bioavailability of 4.2% for I-NP and 10.2% for I-NP-PEG. This superior effect observed for I-NP-PEG would be related to their capability to diffuse through the mucus layer and reach the surface of enterocytes (where insulin would be released), whereas the mucoadhesive I-NP would remain trapped in the mucus, far away from the absorptive epithelium. In summary, PEG-coated zein nanoparticles may be an interesting device for the effective delivery of proteins through the oral route.

Novel strategies to oral delivery of insulin: Current progress of nanocarriers for diabetes management

Diabetes mellitus is one of the most serious public health problems in the world. Repeated daily injections of subcutaneous insulin is the standard treatment for patients with type 1 diabetes mellitus; however, subcutaneous insulin injections can potentially cause local discomfort, patient noncompliance, hypoglycemia, failure to regulate glucose homeostasis, infections, and fat deposits at the injection sites. In recent years, numerous attempts have been made to produce safe and efficient nanoparticles for oral insulin delivery. Oral administration is considered the most effective alternative route to insulin injection, but it is accompanied by several challenges related to enzymatic proteolysis, digestive breakdown, and absorption barriers. A number of natural and synthetic polymeric, lipid-based, and inorganic nanoparticles have been investigated for use. Although improvements have recently been made in potential oral insulin delivery systems, these require further investigation before clinical trials are conducted. In this review, new approaches to oral insulin delivery for diabetes treatment are discussed, including polymeric, lipid-based, and inorganic nanoparticles, as well as the clinical trials performed for this purpose.

Spectroscopic study of self-assembly of anti-hepatitis C virus sofosbuvir drug with bio-polymeric nanoparticles for improving the drug release effect

Self-assembly of Sofosbuvir drug (SOF) anti-hepatitis C virus (HCV) with bio-polymeric nanoparticles such as chitosan nanoparticles (Cs NPs) and polyvinyl alcohol nanoparticles (PVA NPs), the novel composites have been characterized successfully by different analysis such as Energy-dispersive X-ray spectroscopy (EDX), Scanning electron microscopy (SEM), UV-Visible spectrophotometer (UV-Vis) and Fourier Transmittance Infrared (FT-IR). The improvement of the Sofosbuvir effect as a result of loading drug on the bio-polymer NPs surface has been detected by the UV-Vis, and fluorescence spectroscopy techniques. The improvement of SOF efficiency was revealed via studying the drug release of SOF from biopolymers NPs surface at pH 7.4, UV-Vis spectra used for the releasing process. The binding constant (K_b) value was reported at 0.000055 and 0.3613 min^-1 for Cs and PVA NPs respectively. Also, the value of K_SV was documented at 0.0014 and 7.16 min^-1 for Cs@SOF and PVA@SOF hybrid nanocomposite. The incorporation rate (k) of SOF on the surface of biopolymer nano molecules was calculated to be 0.00812 and 0.0165 min^-1 for Cs and PVA NPs, respectively. Besides the observed value of (n) was close to the unit 0.74 and 0.86 for Cs and PVA NPs, respectively. The SOF released from Cs NPs surface was documented at 0.09 mg after 24 h, while PVA NPs reported at 0.7 mg at the same time and the release efficiency is 56.5 and 73% for Cs@SOF and PVP@SOF, respectively. From the results, we suggest Cs/SOF and PVA/SOF hybrid nanocomposites have spectroscopic results that make them promising candidate drugs, but need to the clinical trials.

Improved Bioavailability of Poorly Soluble Drugs through Gastrointestinal Muco-Adhesion of Lipid Nanoparticles

Gastrointestinal absorption remains indispensable in the systemic delivery of most drugs, even though it presents several challenges that, paradoxically, may also provide opportunities that can be exploited to achieve maximal bioavailability. Drug delivery systems made from nanoparticle carriers and especially, lipid carriers, have the potential to traverse gastrointestinal barriers and deploy in the lymphatic pathway, which aptly, is free from first pass via the liver. Several poorly soluble drugs have presented improved systemic bioavailability when couriered in lipid nanoparticle carriers. In this review, we propose an additional frontier to enhancing the bioavailability of poorly soluble drugs when encapsulated in lipid nano-carriers by imparting muco-adhesion to the particles through application of appropriate polymeric coating to the lipid carrier. The combined effect of gastrointestinal muco-adhesion followed by lymphatic absorption is a promising approach to improving systemic bioavailability of poorly soluble drugs following oral administration. Evidence to the potential of this approach is backed-up by recent studies within the review.

Effects of Different Drying Methods on the Characterization, Dissolution Rate and Antioxidant Activity of Ursolic Acid-Loaded Chitosan Nanoparticles

To improve the water solubility of ursolic acid (UA), UA-loaded chitosan nanoparticles were firstly prepared by the ionotropic gelation method and dried by freeze drying (FD), microwave freeze drying (MFD) and spray drying (SD). The characterization of UA-loaded chitosan nanoparticles was performed with particle size, drug loading (DL), scanning electron microscope (SEM), fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), dissolution studies and antioxidant activity. The results demonstrated that UA was successfully encapsulated into chitosan nanoparticles using sodium tripolyphosphate (TPP) as a cross-linker, with a 79% encapsulation efficiency. The spray-dried, UA-loaded chitosan nanoparticles had the lowest drug loading (11.8%) and the highest particle size (496.9 ± 11.20 nm). The particle size of UA-loaded chitosan nanoparticles dried by MFD and FD was lower, at 240.8 ± 12.10 nm and 184.4 ± 10.62 nm, respectively, and their antioxidant activity was higher than those nanoparticles dried by SD. Moreover, the drying time and energy consumption of UA-loaded chitosan nanoparticles dried by MFD and SD were lower than that of FD. The dissolution rates of UA-loaded chitosan nanoparticles prepared by FD and MFD were 60.6% and 57.1%, respectively, in a simulated gastric fluid, which was a greater value than SD (55.9%). Therefore, the UA-loaded chitosan nanoparticles encapsulation method, combined with MFD technology, showed a promising potential to improve the water solubility of UA.

Stimuli-Responsive Polymeric Nanosystems for Controlled Drug Delivery

Biocompatible nanosystems based on polymeric materials are promising drug delivery nanocarrier candidates for antitumor therapy. However, the efficacy is unsatisfying due to nonspecific accumulation and drug release of the nanoparticles in normal tissue. Recently, the nanosystems that can be triggered by tumor-specific stimuli have drawn great interest for drug delivery applications due to their controllable drug release properties. In this review, various polymers and external stimuli that can be employed to develop stimuli-responsive polymeric nanosystems are discussed, and finally, we delineate the challenges in designing this kind of Nanomedicine to improve the therapeutic efficacy.

Novel porous starch/alginate hydrogels for controlled insulin release with dual response to pH and amylase

An important principle in the development of oral insulin is to protect insulin from the harsh conditions of the stomach and release it in a controlled manner in the intestine. In the present study, novel insulin-loaded porous starch-alginate hydrogel systems (In-S-Alg) including In-MS-Alg (prepared with porous maize starch), In-WS-Alg (porous waxy maize starch), and In-RS-Alg (porous rice starch) were successfully developed. As a representative, In-MS-Alg was further coated with gelatinized-retrograded high amylose maize starch (HA) films with different thicknesses to prepare In-MS-HA/Alg hydrogel beads for improving the functionality of controlled release of insulin under the action of α-amylase. The In-S-Alg and In-MS-HA/Alg hydrogel beads were evaluated in terms of structural and morphological properties, encapsulation effect on insulin as well as its release behavior. The results show that insulin was distributed in the pores and cavities of porous starch granules. In In-MS-HA/Alg hydrogel beads, insulin was increasingly blocked inside porous starch with the increased thickness of the HA film. Encapsulation efficiency of insulin in all In-S-Alg and In-MS-HA/Alg hydrogel beads was >80%. Amazingly, both the hydrogel beads successfully achieved the goal of triggered release upon pH changes and α-amylase addition. Most of the insulin (about 90%) was retained in the simulated gastric fluid; while the release rate of insulin in the simulated intestinal fluid increased gradually, and was further accelerated in the presence of α-amylase. Furthermore, for the In-MS-HA/Alg hydrogel beads, the insulin release rate can be gradually reduced by increasing the thickness of the HA film, which provided the possibility to match the rate of increase of the blood glucose level after the intake of food with different glycemic indices. Therefore, the novel hydrogel prepared in this study may be a promising and safe delivery carrier for oral insulin.

Formation of Multicolor Nanogels Based on Cationic Polyfluorenes and Poly(methyl vinyl ether-alt-maleic monoethyl ester): Potential Use as pH-Responsive Fluorescent Drug Carriers

In this study, we employed the copolymer poly(methyl vinyl ether-alt-maleic monoethyl ester) (PMVEMA-Es) and three fluorene-based cationic conjugated polyelectrolytes to develop fluorescent nanoparticles with emission in the blue, green and red spectral regions. The size, Zeta Potential, polydispersity, morphology, time-stability and fluorescent properties of these nanoparticles were characterized, as well as the nature of the interaction between both PMVEMA-Es and fluorescent polyelectrolytes. Because PMVEMA-Es contains a carboxylic acid group in its structure, the effects of pH and ionic strength on the nanoparticles were also evaluated, finding that the size is responsive to pH and ionic strength, largely swelling at physiological pH and returning to their initial size at acidic pHs. Thus, the developed fluorescent nanoparticles can be categorized as pH-sensitive fluorescent nanogels, since they possess the properties of both pH-responsive hydrogels and nanoparticulate systems. Doxorubicin (DOX) was used as a model drug to show the capacity of the blue-emitting nanogels to hold drugs in acidic media and release them at physiological pH, from changes in the fluorescence properties of both nanoparticles and DOX. In addition, preliminary studies by super-resolution confocal microscopy were performed, regarding their potential use as image probes.

Applications of Functionalized Hydrogels in the Regeneration of the Intervertebral Disc

Intervertebral disc degeneration (IDD) is caused by genetics, aging, and environmental factors and is one of the leading causes of low back pain. The treatment of IDD presents many challenges. Hydrogels are biomaterials that possess properties similar to those of the natural extracellular matrix and have significant potential in the field of regenerative medicine. Hydrogels with various functional qualities have recently been used to repair and regenerate diseased intervertebral discs. Here, we review the mechanisms of intervertebral disc homeostasis and degeneration and then discuss the applications of hydrogel-mediated repair and intervertebral disc regeneration. The classification of artificial hydrogels and natural hydrogels is then briefly introduced, followed by an update on the development of functional hydrogels, which include noncellular therapeutic hydrogels, cellular therapeutic hydrogel scaffolds, responsive hydrogels, and multifunctional hydrogels. The challenges faced and future developments of the hydrogels used in IDD are discussed as they further promote their clinical translation.

Nanocarrier-Mediated Topical Insulin Delivery for Wound Healing

Wound care has been clinically demanding due to inefficacious treatment that represents an economic burden for healthcare systems. In Europe, approximately 7 million people are diagnosed with untreated wounds, leading to a cost between 6.000€ and 10.000€ per patient/year. In the United States of America, 1.5 million people over 65 years old suffer from chronic wounds. A promising therapeutic strategy is the use of exogenous growth factors because they are decreased at the wound site, limiting the recovery of the skin. Insulin is one of the cheapest growth factors in the market able to accelerate the re-epithelialization and stimulate angiogenesis and cell migration. However, the effectiveness of topical insulin in wound healing is hampered by the proteases in the wound bed. The encapsulation into nanoparticles improves its stability in the wound, providing adhesion to the mucosal surface and allowing its sustained release. The aim of this review is to perform a standing point about a promising strategy to treat different types of wounds by the topical delivery of insulin-loaded nanocarriers.

Strategies to improve insulin delivery through oral route: A review

Diabetes mellitus is found to be among the most suffered and lethal diseases for mankind. Diabetes mellitus type-1 is caused by the demolition of pancreatic islets responsible for the secretion of insulin. Insulin is the peptide hormone (anabolic] that regulates the metabolism of carbohydrates, fats, and proteins. Upon the breakdown of the natural process of metabolism, the condition leads to hyperglycemia (increased blood glucose levels]. Hyperglycemia demands outsourcing of insulin. The subcutaneous route was found to be the most stable route of insulin administration but faces patient compliance problems. Oral Insulin delivery systems are the patient-centered and innovative novel drug delivery system, eliminating the pain caused by the subcutaneous route of administration. Insulin comes in contact across various barriers in the gastrointestinal tract, which has been discussed in detail in this review. The review describes about the different bioengineered formulations, including microcarriers, nanocarriers, Self-Microemulsifying drug delivery systems (SMEDDs), Self-Nanoemulsifying drug delivery systems (SNEDDs), polymeric micelles, cochleates, etc. Surface modification of the carriers is also possible by developing ligand anchored bioconjugates. A study on evaluation has shown that the carrier systems facilitate drug encapsulation without tampering the properties of insulin. Carrier-mediated transport by the use of natural, semi-synthetic, and synthetic polymers have shown efficient results in drug delivery by protecting insulin from harmful environment. This makes the formulation readily acceptable for a variety of populations. The present review focuses on the properties, barriers present in the GI tract, overcome the barriers, strategies to formulate oral insulin formulation by enhancing the stability and bioavailability of insulin.

Zein nanoparticles as low-cost, safe, and effective carriers to improve the oral bioavailability of resveratrol

The clinical translation of the multiple pharmacological effects of resveratrol (RSV) found in preclinical studies has been impaired by its poor bioavailability, due to poor solubility and rapid metabolism and elimination. The inclusion of this molecule in medicines or functional food products will be ineffective unless suitable systems are developed. Zein protein may constitute an inexpensive, safe, and effective choice to produce nanoparticles (NPs) to incorporate hydrophobic molecules and overcome the bioavailability issues of RSV. In this work, we loaded RSV into zein NPs by using a nanoprecipitation method. Unloaded and RSV-loaded NPs presented average diameter values in the range of 120-180 nm, narrow size distribution (polydispersity index < 0.150), and zeta potential of around + 20 mV. The association efficiency of the drug was equal to or greater than 77% for different initial drug loads. Scanning electron microscopy imaging revealed that zein NPs were round-shaped and presented a smooth surface. Aqueous suspensions of zein NPs were stable for at least 1 month when stored at 4 °C. The freeze-drying of zein NPs using sucrose as cryoprotectant allowed an easy re-suspension of NPs in water without significantly changing the initial colloidal properties. RSV-loaded NPs presented low cytotoxicity to the human colorectal Caco-2 and HT29-MTX cell lines. Finally, permeability studies of RSV across Caco-2 and Caco-2/HT29-MTX evidenced some ability of zein NPs to protect RSV from metabolism events. However, further investigation is needed in order to confirm the possible role of zein NPs in the metabolic stability of RSV. Overall, zein NPs may present the potential to circumvent bioavailability issues of RSV. Graphical abstract.

Preparation and Antimicrobial Activity of Chitosan and Its Derivatives: A Concise Review

Despite the advantages presented by synthetic polymers such as strength and durability, the lack of biodegradability associated with the persistence in the environment for a long time turned the attention of researchers to natural polymers. Being biodegradable, biopolymers proved to be extremely beneficial to the environment. At present, they represent an important class of materials with applications in all economic sectors, but also in medicine. They find applications as absorbers, cosmetics, controlled drug delivery, tissue engineering, etc. Chitosan is one of the natural polymers which raised a strong interest for researchers due to some exceptional properties such as biodegradability, biocompatibility, nontoxicity, non-antigenicity, low-cost and numerous pharmacological properties as antimicrobial, antitumor, antioxidant, antidiabetic, immunoenhancing. In addition to this, the free amino and hydroxyl groups make it susceptible to a series of structural modulations, obtaining some derivatives with different biomedical applications. This review approaches the physico-chemical and pharmacological properties of chitosan and its derivatives, focusing on the antimicrobial potential including mechanism of action, factors that influence the antimicrobial activity and the activity against resistant strains, topics of great interest in the context of the concern raised by the available therapeutic options for infections, especially with resistant strains.

The impact of chemical engineering and technological advances on managing diabetes: present and future concepts

Monitoring blood glucose levels for diabetic patients is critical to achieve tight glycaemic control. As none of the current antidiabetic treatments restore lost functional β-cell mass in diabetic patients, insulin injections and the use of insulin pumps are most widely used in the management of glycaemia. The use of advanced and intelligent chemical engineering, together with the incorporation of micro- and nanotechnological-based processes have lately revolutionized diabetic management. The start of this concept goes back to 1974 with the description of an electrode that repeatedly measures the level of blood glucose and triggers insulin release from an infusion pump to enter the blood stream from a small reservoir upon need. Next to the insulin pumps, other drug delivery routes, including nasal, transdermal and buccal, are currently investigated. These processes necessitate competences from chemists, engineers-alike and innovative views of pharmacologists and diabetologists. Engineered micro and nanostructures hold a unique potential when it comes to drug delivery applications required for the treatment of diabetic patients. As the technical aspects of chemistry, biology and informatics on medicine are expanding fast, time has come to step back and to evaluate the impact of technology-driven chemistry on diabetics and how the bridges from research laboratories to market products are established. In this review, the large variety of therapeutic approaches proposed in the last five years for diabetic patients are discussed in an applied context. A survey of the state of the art of closed-loop insulin delivery strategies in response to blood glucose level fluctuation is provided together with insights into the emerging key technologies for diagnosis and drug development. Chemical engineering strategies centered on preserving and regenerating functional pancreatic β-cell mass are evoked in addition as they represent a permanent solution for diabetic patients.

Reduction of enzymatic degradation of insulin via encapsulation in a lipidic bicontinuous cubic phase

Oral delivery of the protein drug insulin is not currently possible due to rapid degradation of the secondary structure in low pH conditions in the stomach and under the influence of digestive enzymes in the gastrointestinal tract. Effective oral delivery of insulin and other protein- or peptide-based drugs will, therefore, require encapsulation in a material or nanoparticle. Herein we investigate the ability of the lipid bicontinuous cubic phase formed by two lipids, monoolein (MO) and phytantriol (PT), to protect encapsulated insulin from degradation by the enzyme chymotrypsin, typically found in the small intestine. High encapsulation efficiency (>80%) was achieved in both lipid cubic phases with retention of the underlying cubic nanostructure. Release of insulin from the cubic matrix was shown to be diffusion-controlled; the release rate was dependent on the cubic nanostructure and consistent with measured diffusion coefficients for encapsulated insulin. Encapsulation was shown to significantly retard enzymatic degradation relative to that in water, with the protective effect lasting up to 2 h, exemplifying the potential of these materials to protect the encapsulated protein payload during oral delivery.

A Brief Overview of the Oral Delivery of Insulin as an Alternative to the Parenteral Delivery

Diabetes mellitus greatly affects the quality of life of patients and has a worldwide prevalence. Insulin is the most commonly used drug to treat diabetic patients and is usually administered through the subcutaneous route. However, this route of administration is ineffective due to the low concentration of insulin at the site of action. This route of administration causes discomfort to the patient and increases the risk of infection due to skin barrier disturbance caused by the needle. The oral administration of insulin has been proposed to surpass the disadvantages of subcutaneous administration. In this review, we give an overview of the strategies to deliver insulin by the oral route, from insulin conjugation to encapsulation into nanoparticles. These strategies are still under development to attain efficacy and effectiveness that are expected to be achieved in the near future.

Nano-based drug delivery systems used as vehicles to enhance polyphenols therapeutic effect for diabetes mellitus treatment

Diabetes mellitus is one of the biggest health emergencies of the 21^st century worldwide, characterized by deficiency in insulin secretion and/or action, leading to hyperglycemia. Despite the currently available antidiabetic therapeutic options, 4.2 million people died in 2019 due to diabetes. Thus, new effective interventions are required. Polyphenols are plant secondary metabolites and have been recognized for their vast number of biological activities, including potential antidiabetic effects. However, the poor bioavailability and high metabolization of polyphenols restrict their biological effects in vivo. Nanotechnology is a promising area of research to improve the therapeutic effect of several compounds. Therefore, this review provides an overview of the literature about the utility of nano-based drug delivery systems as vehicles of polyphenols in diabetes treatment. It was possible to conclude that, in general, nano-based drug delivery systems can potentiate the beneficial antidiabetic properties of polyphenols, when compared with the free compounds, opening a new field of research in diabetology.