Bioremediation 3 . 0 : Engineering pollutant-removing bacteria in the times of systemic biology

A feasible approach for azo-dye (methyl orange) degradation by textile effluent isolate Serratia marcescens ED1 strain for water sustainability: AST identification, degradation optimization and pathway hypothesis

Methyl orange (MO) is a dye commonly used in the textile industry that harms aquatic life, soil and human health due to its potential as an environmental pollutant. The present study describes the dye degradation ability of Serratia marcescens strain ED1 isolated from textile effluent and characterized by 16S rRNA gene sequence analysis. The laccase property of bacterial isolate was confirmed qualitatively. The effects of various factors (pH, temperature, incubation time, and dye concentration) were evaluated using Response Surface Methodology (RSM). The maximum dye (MO) degradation was 81.02 % achieved at 37 °C temperature and 7.0 pH with 200 mg/L dye concentration after 48 h of incubation. The beef extract, ammonium nitrate and fructose supplementation showed better response during bioremediation among the different carbon and nitrogen sources. The degree of pathogenicity was confirmed through the simple plate-based method, and an antibiotic resistance profile was used to check the low-risk rate of antibiotic resistance. However, the fate and extinct of degraded MO products were analysed through UV-Vis spectroscopy, FT-IR, and GC-MS analysis to confirm the biodegradation potential of the bacterial strain ED1 and intermediate metabolites were identified to propose metabolic pathway. The phytotoxicity study on Vigna radiata L. seeds confirmed nontoxic effect of degraded MO metabolites and indicates promising degradation potential of S. marcescens strain ED1 to successfully remediate MO dye ecologically sustainably.

Metabolic engineering of Pseudomonas bharatica CSV86T to degrade Carbaryl (1-naphthyl-N-methylcarbamate) via the salicylate-catechol route

Pseudomonas bharatica CSV86T displays the unique property of preferential utilization of aromatic compounds over simple carbon sources like glucose and glycerol and their co-metabolism with organic acids. Well-characterized growth conditions, aromatic compound metabolic pathways and their regulation, genome sequence, and advantageous eco-physiological traits (indole acetic acid production, alginate production, fusaric acid resistance, organic sulfur utilization, and siderophore production) make it an ideal host for metabolic engineering. Strain CSV86T was engineered for Carbaryl (1-naphthyl-N-methylcarbamate) degradation via salicylate-catechol route by expression of a Carbaryl hydrolase (CH) and a 1-naphthol 2-hydroxylase (1NH). Additionally, the engineered strain exhibited faster growth on Carbaryl upon expression of the McbT protein (encoded by the mcbT gene, a part of Carbaryl degradation upper operon of Pseudomonas sp. C5pp). Bioinformatic analyses predict McbT to be an outer membrane protein, and Carbaryl-dependent expression suggests its probable role in Carbaryl uptake. Enzyme activity and protein analyses suggested periplasmic localization of CH (carrying transmembrane domain plus signal peptide sequence at the N-terminus) and 1NH, enabling compartmentalization of the pathway. Enzyme activity, whole-cell oxygen uptake, spent media analyses, and qPCR results suggest that the engineered strain preferentially utilizes Carbaryl over glucose. The plasmid-encoded degradation property was stable for 75-90 generations even in the absence of selection pressure (kanamycin or Carbaryl). These results indicate the utility of P. bharatica CSV86T as a potential host for engineering various aromatic compound degradation pathways.IMPORTANCEThe current study describes engineering of Carbaryl metabolic pathway in Pseudomonas bharatica CSV86T. Carbaryl, a naphthalene-derived carbamate pesticide, is known to act as an endocrine disruptor, mutagen, cytotoxin, and carcinogen. Removal of xenobiotics from the environment using bioremediation faces challenges, such as slow degradation rates, instability of the degradation phenotype, and presence of simple carbon sources in the environment. The engineered CSV86-MEC2 overcomes these disadvantages as Carbaryl was degraded preferentially over glucose. Furthermore, the plasmid-borne degradation phenotype is stable, and presence of glucose and organic acids does not repress Carbaryl metabolism in the strain. The study suggests the role of outer membrane protein McbT in Carbaryl transport. This work highlights the suitability of P. bharatica CSV86T as an ideal host for engineering aromatic pollutant degradation pathways.

Bioremediation of petroleum refinery wastewater using Bacillus subtilis IH-1 and assessment of its toxicity

Environmental contamination from petroleum refinery operations has increased due to the rapid population growth and modernization of society, necessitating urgent repair. Microbial remediation of petroleum wastewater by prominent bacterial cultures holds promise in circumventing the issue of petroleum-related pollution. Herein, the bacterial culture was isolated from petroleum-contaminated sludge samples for the valorization of polyaromatic hydrocarbons and biodegradation of petroleum wastewater samples. The bacterial strain was screened and identified as Bacillus subtilis IH-1. After six days of incubation, the bacteria had degraded 25.9% of phenanthrene and 20.3% of naphthalene. The treatment of wastewater samples was assessed using physico-chemical and Fourier-transform infrared spectroscopy analysis, which revealed that the level of pollutants was elevated and above the allowed limits. Following bacterial degradation, the reduction in pollution parameters viz. EC (82.7%), BOD (87.0%), COD (80.0%), total phenols (96.3%), oil and grease (79.7%), TKN (68.8%), TOC (96.3%) and TPH (52.4%) were observed. The reduction in pH and heavy metals were also observed after bacterial treatment. V. mungo was used in the phytotoxicity test, which revealed at 50% wastewater concentration the reduction in biomass (30.3%), root length (87.7%), shoot length (93.9%), and seed germination (30.0%) was observed in comparison to control. When A. cepa root tips immersed in varying concentrations of wastewater samples, the mitotic index significantly decreased, suggesting the induction of cytotoxicity. However, following the bacterial treatment, there was a noticeable decrease in phytotoxicity and cytotoxicity. The bacterial culture produces lignin peroxidase enzyme and has the potential to degrade the toxic pollutants of petroleum wastewater. Therefore the bacterium may be immobilised or directly used at reactor scale or pilot scale study to benefit the industry and environmental safety.

Enzymatic synthesis of mono- and trifluorinated alanine enantiomers expands the scope of fluorine biocatalysis

Fluorinated amino acids serve as an entry point for establishing new-to-Nature chemistries in biological systems, and novel methods are needed for the selective synthesis of these building blocks. In this study, we focused on the enzymatic synthesis of fluorinated alanine enantiomers to expand fluorine biocatalysis. The alanine dehydrogenase from Vibrio proteolyticus and the diaminopimelate dehydrogenase from Symbiobacterium thermophilum were selected for in vitro production of (R)-3-fluoroalanine and (S)-3-fluoroalanine, respectively, using 3-fluoropyruvate as the substrate. Additionally, we discovered that an alanine racemase from Streptomyces lavendulae, originally selected for setting an alternative enzymatic cascade leading to the production of these non-canonical amino acids, had an unprecedented catalytic efficiency in β-elimination of fluorine from the monosubstituted fluoroalanine. The in vitro enzymatic cascade based on the dehydrogenases of V. proteolyticus and S. thermophilum included a cofactor recycling system, whereby a formate dehydrogenase from Pseudomonas sp. 101 (either native or engineered) coupled formate oxidation to NAD(P)H formation. Under these conditions, the reaction yields for (R)-3-fluoroalanine and (S)-3-fluoroalanine reached >85% on the fluorinated substrate and proceeded with complete enantiomeric excess. The selected dehydrogenases also catalyzed the conversion of trifluoropyruvate into trifluorinated alanine as a first-case example of fluorine biocatalysis with amino acids carrying a trifluoromethyl group.

AI-assisted systematic review on remediation of contaminated soils with PAHs and heavy metals

This systematic review addresses soil contamination by crude oil, a pressing global environmental issue, by exploring effective treatment strategies for sites co-contaminated with heavy metals and polycyclic aromatic hydrocarbons (PAHs). Our study aims to answer pivotal research questions: (1) What are the interaction mechanisms between heavy metals and PAHs in contaminated soils, and how do these affect the efficacy of different remediation methods? (2) What are the challenges and limitations of combined remediation techniques for co-contaminated soils compared to single-treatment methods in terms of efficiency, stability, and specificity? (3) How do various factors influence the effectiveness of biological, chemical, and physical remediation methods, both individually and combined, in co-contaminated soils, and what role do specific agents play in the degradation, immobilization, or removal of heavy metals and PAHs under diverse environmental conditions? (4) Do AI-powered search tools offer a superior alternative to conventional search methodologies for executing an exhaustive systematic review? Utilizing big-data analytics and AI tools such as Litmaps.co, ResearchRabbit, and MAXQDA, this study conducts a thorough analysis of remediation techniques for soils co-contaminated with heavy metals and PAHs. It emphasizes the significance of cation-π interactions and soil composition in dictating the solubility and behavior of these pollutants. The study pays particular attention to the interplay between heavy metals and PAH solubility, as well as the impact of soil properties like clay type and organic matter on heavy metal adsorption, which results in nonlinear sorption patterns. The research identifies a growing trend towards employing combined remediation techniques, especially biological strategies like biostimulation-bioaugmentation, noting their effectiveness in laboratory settings, albeit with potentially higher costs in field applications. Plants such as Medicago sativa L. and Solanum nigrum L. are highlighted for their effectiveness in phytoremediation, working synergistically with beneficial microbes to decompose contaminants. Furthermore, the study illustrates that the incorporation of biochar and surfactants, along with chelating agents like EDTA, can significantly enhance treatment efficiency. However, the research acknowledges that varying environmental conditions necessitate site-specific adaptations in remediation strategies. Life Cycle Assessment (LCA) findings indicate that while high-energy methods like Steam Enhanced Extraction and Thermal Resistivity - ERH are effective, they also entail substantial environmental and financial costs. Conversely, Natural Attenuation, despite being a low-impact and cost-effective option, may require prolonged monitoring. The study advocates for an integrative approach to soil remediation, one that harmoniously balances environmental sustainability, cost-effectiveness, and the specific requirements of contaminated sites. It underscores the necessity of a holistic strategy that combines various remediation methods, tailored to meet both regulatory compliance and the long-term sustainability of decontamination efforts.

Rhizosphere engineering for soil carbon sequestration

The rhizosphere is the central hotspot of water and nutrient uptake by plants, rhizodeposition, microbial activities, and plant-soil-microbial interactions. The plasticity of plants offers possibilities to engineer the rhizosphere to mitigate climate change. We define rhizosphere engineering as targeted manipulation of plants, soil, microorganisms, and management to shift rhizosphere processes for specific aims [e.g., carbon (C) sequestration]. The rhizosphere components can be engineered by agronomic, physical, chemical, biological, and genomic approaches. These approaches increase plant productivity with a special focus on C inputs belowground, increase microbial necromass production, protect organic compounds and necromass by aggregation, and decrease C losses. Finally, we outline multifunctional options for rhizosphere engineering: how to boost C sequestration, increase soil health, and mitigate global change effects.

Progress in polystyrene biodegradation by insect gut microbiota

Polystyrene (PS) is frequently used in the plastics industry. However, its structural stability and difficulty to break down lead to an abundance of plastic waste in the environment, resulting in micro-nano plastics (MNPs). As MNPs are severe hazards to both human and environmental health, it is crucial to develop innovative treatment technologies to degrade plastic waste. The biodegradation of plastics by insect gut microorganisms has gained attention as it is environmentally friendly, efficient, and safe. However, our knowledge of the biodegradation of PS is still limited. This review summarizes recent research advances on PS biodegradation by gut microorganisms/enzymes from insect larvae of different species, and schematic pathways of the degradation process are discussed in depth. Additionally, the prospect of using modern biotechnology, such as genetic engineering and systems biology, to identify novel PS-degrading microbes/functional genes/enzymes and to realize new strategies for PS biodegradation is highlighted. Challenges and limitations faced by the application of genetically engineered microorganisms (GEMs) and multiomics technologies in the field of plastic pollution bioremediation are also discussed. This review encourages the further exploration of the biodegradation of PS by insect gut microbes/enzymes, offering a cutting-edge perspective to identify PS biodegradation pathways and create effective biodegradation strategies.

Synthetically-primed adaptation of Pseudomonas putida to a non-native substrate D-xylose

To broaden the substrate scope of microbial cell factories towards renewable substrates, rational genetic interventions are often combined with adaptive laboratory evolution (ALE). However, comprehensive studies enabling a holistic understanding of adaptation processes primed by rational metabolic engineering remain scarce. The industrial workhorse Pseudomonas putida was engineered to utilize the non-native sugar D-xylose, but its assimilation into the bacterial biochemical network via the exogenous xylose isomerase pathway remained unresolved. Here, we elucidate the xylose metabolism and establish a foundation for further engineering followed by ALE. First, native glycolysis is derepressed by deleting the local transcriptional regulator gene hexR. We then enhance the pentose phosphate pathway by implanting exogenous transketolase and transaldolase into two lag-shortened strains and allow ALE to finetune the rewired metabolism. Subsequent multilevel analysis and reverse engineering provide detailed insights into the parallel paths of bacterial adaptation to the non-native carbon source, highlighting the enhanced expression of transaldolase and xylose isomerase along with derepressed glycolysis as key events during the process.

Strategies for mitigation of pesticides from the environment through alternative approaches: A review of recent developments and future prospects

Chemical-based peticides are having negative impacts on both the healths of human beings and plants as well. The World Health Organisation (WHO), reported that each year, >25 million individuals in poor nations are having acute pesticide poisoning cases along with 20,000 fatal injuries at global level. Normally, only ∼0.1% of the pesticide reaches to the intended targets, and rest amount is expected to come into the food chain/environment for a longer period of time. Therefore, it is crucial to reduce the amounts of pesticides present in the soil. Physical or chemical treatments are either expensive or incapable to do so. Hence, pesticide detoxification can be achieved through bioremediation/biotechnologies, including nano-based methodologies, integrated approaches etc. These are relatively affordable, efficient and environmentally sound methods. Therefore, alternate strategies like as advanced biotechnological tools like as CRISPR Cas system, RNAi and genetic engineering for development of insects and pest resistant plants which are directly involved in the development of disease- and pest-resistant plants and indirectly reduce the use of pesticides. Omics tools and multi omics approaches like metagenomics, genomics, transcriptomics, proteomics, and metabolomics for the efficient functional gene mining and their validation for bioremediation of pesticides also discussed from the literatures. Overall, the review focuses on the most recent advancements in bioremediation methods to lessen the effects of pesticides along with the role of microorganisms in pesticides elimination. Further, pesticide detection is also a big challenge which can be done by using HPLC, GC, SERS, and LSPR ELISA etc. which have also been described in this review.

Bacterial tolerance and detoxification of cyanide, arsenic and heavy metals: Holistic approaches applied to bioremediation of industrial complex wastes

Cyanide is a highly toxic compound that is found in wastewaters generated from different industrial activities, such as mining or jewellery. These residues usually contain high concentrations of other toxic pollutants like arsenic and heavy metals that may form different complexes with cyanide. To develop bioremediation strategies, it is necessary to know the metabolic processes involved in the tolerance and detoxification of these pollutants, but most of the current studies are focused on the characterization of the microbial responses to each one of these environmental hazards individually, and the effect of co-contaminated wastes on microbial metabolism has been hardly addressed. This work summarizes the main strategies developed by bacteria to alleviate the effects of cyanide, arsenic and heavy metals, analysing interactions among these toxic chemicals. Additionally, it is discussed the role of systems biology and synthetic biology as tools for the development of bioremediation strategies of complex industrial wastes and co-contaminated sites, emphasizing the importance and progress derived from meta-omic studies.

Exploring the role of microbial proteins in controlling environmental pollutants based on molecular simulation

Molecular simulation has been widely used to study microbial proteins' structural composition and dynamic properties, such as volatility, flexibility, and stability at the microscopic scale. Herein, this review describes the key elements of molecular docking and molecular dynamics (MD) simulations in molecular simulation; reviews the techniques combined with molecular simulation, such as crystallography, spectroscopy, molecular biology, and machine learning, to validate simulation results and bridge information gaps in the structure, microenvironmental changes, expression mechanisms, and intensity quantification; illustrates the application of molecular simulation, in characterizing the molecular mechanisms of interaction of microbial proteins with four different types of contaminants, namely heavy metals (HMs), pesticides, dyes and emerging contaminants (ECs). Finally, the review outlines the important role of molecular simulations in the study of microbial proteins for controlling environmental contamination and provides ideas for the application of molecular simulation in screening microbial proteins and incorporating targeted mutagenesis to obtain more effective contaminant control proteins.

Mechanism and application of modified bioelectrochemical system anodes made of carbon nanomaterial for the removal of heavy metals from soil

Bioelectrochemical techniques are quick, efficient, and sustainable alternatives for treating heavy metal soils. The use of carbon nanomaterials in combination with electroactive microorganisms can create a conductive network that mediates long-distance electron transfer in an electrode system, thereby resolving the issue of low electron transfer efficiency in soil remediation. As a multifunctional soil heavy metal remediation technology, its application in organic remediation has matured, and numerous studies have demonstrated its potential for soil heavy metal remediation. This is a ground-breaking method for remediating soils polluted with high concentrations of heavy metals using soil microbial electrochemistry. This review summarizes the use of bioelectrochemical systems with modified anode materials for the remediation of soils with high heavy metal concentrations by discussing the mass-transfer mechanism of electrochemically active microorganisms in bioelectrochemical systems, focusing on the suitability of carbon nanomaterials and acidophilic bacteria. Finally, we discuss the emerging limitations of bioelectrochemical systems, and future research efforts to improve their performance and facilitate practical applications. The mass-transfer mechanism of electrochemically active microorganisms in bioelectrochemical systems emphasizes the suitability of carbon nanomaterials and acidophilic bacteria for remediating soils polluted with high concentrations of heavy metals. We conclude by discussing present and future research initiatives for bioelectrochemical systems to enhance their performance and facilitate practical applications. As a result, this study can close any gaps in the development of bioelectrochemical systems and guide their practical application in remediating heavy-metal-contaminated soils.

Fighting the battle against evolution: designing genetically modified organisms for evolutionary stability

Synthetic biology has made significant progress in many areas, but a major challenge that has received limited attention is the evolutionary stability of synthetic constructs made of heterologous genes. The expression of these constructs in microorganisms, that is, production of proteins that are not necessary for the organism, is a metabolic burden, leading to a decrease in relative fitness and make the synthetic constructs unstable over time. This is a significant concern for the synthetic biology community, particularly when it comes to bringing this technology out of the laboratory. In this review, we discuss the issue of evolutionary stability in synthetic biology and review the available tools to address this challenge.

Mechanism of synergistic remediation of soil phenanthrene contamination in paddy fields by rice-crab coculture and bioaugmentation with Pseudomonas sp

Polycyclic aromatic hydrocarbons (PAHs) are persistent and harmful pollutants with high priority concern in agricultural fields. This work constructed a rice-crab coculture and bioaugmentation (RCM) system to remediate phenanthrene (a model PAH) contamination in rice fields. The results showed that RCM had a higher remediation performance of phenanthrene in rice paddy compared with rice cultivation alone, microbial addition alone, and crab-rice coculture, reaching a remediation efficiency of 88.92 % in 42 d. The concentration of phenanthrene in the rice plants decreased to 6.58 mg/kg, and its bioconcentration effect was efficiently inhibited in the RCM system. In addition, some low molecular weight organic acids of rice root increased by 12.87 %∼73.87 %, and some amino acids increased by 140 %∼1150 % in RCM. Bioturbation of crabs improves soil aeration structure and microbial migration, and adding Pseudomonas promoted the proliferation of some plant growth-promoting rhizobacteria (PGPRs), which facilitated the degradation of phenanthrene. This coupling rice-crab coculture with bioaugmentation had favorable effects on soil enzyme activity, microbial community structure, and PAH degradation genes in paddy fields, enhancing the removal of and resistance to PAH contamination in paddy fields and providing new strategies for achieving a balance between production and remediation in contaminated paddy fields.

A novel marine bacterium Exiguobacterium marinum a-1 isolated from in situ plastisphere for degradation of additive-free polypropylene

As the ecological niche most closely associated with polymers, microorganisms in the 'plastisphere' have great potential for plastics degradation. Microorganisms isolated from the 'plastisphere' could colonize and degrade commercial plastics containing different additives, but the observed weight loss and surface changes were most likely caused by releasing the additives rather than actual degradation of the plastics itself. Unlike commercial plastics that contain additives, whether marine microorganisms in the 'plastisphere' have adapted to additive-free plastics as a surface to colonize and potentially degrade is not yet known. Herein, a novel marine bacterium, Exiguobacterium marinum a-1, was successfully isolated from mature 'plastisphere' that had been deployed in situ for up to 20 months. Strain a-1 could use additive-free polypropylene (PP) films as its primary energy and carbon source. After strain a-1 was incubated with additive-free PP films for 80 days, the weight of films decreased by 9.2%. The ability of strain a-1 to rapidly form biofilms and effectively colonize the surface of additive-free PP films was confirmed by Scanning Electron Microscopy (SEM), as reflected by the increase in roughness and visible craters on the surface of additive-free PP films. Additionally, the functional groups of -CO, -C-H, and -OH were identified on the treated additive-free PP films according to Fourier Transform Infrared (FTIR). Genomic data from strain a-1 revealed a suite of key genes involved in biosurfactant synthesis, flagellar assembly, and cellular chemotaxis, contributing to its rapid biofilm formation on hydrophobic polymer surfaces. In particular, key enzymes that may be responsible for the degradation of additive-free PP films, such as glutathione peroxidase, cytochrome p450 and esterase were also recognized. This study highlights the potential of microorganisms present in the 'plastisphere' to metabolize plastic polymers and points to the intrinsic importance of the new strain a-1 in the mitigation of plastic pollution.

Engineering a Pseudomonas putida as living quorum quencher for biofilm formation inhibition, benzenes degradation, and environmental risk evaluation

Bacterial communication interruption based on quorum quenching (QQ) has been proven its potential in biofilm formation inhibition and biofouling control. However, it would be more satisfying if QQ could be combined with the efficient degradation of contaminants in environmental engineering. In this study, we engineered a biofilm of Pseudomonas putida through introducing a QQ synthetic gene, which achieved both biofilm formation inhibition and efficient degradation of benzene series in wastewater. The aiiO gene introduced into the P. putida by heat shock method was highly expressed to produce QQ enzyme to degrade AHL-based signal molecules. The addition of this engineered P. putida reduced the AHLs concentration, quorum sensing gene expression, and connections of the microbial community network in activated sludge and therefore inhibited the biofilm formation. Meanwhile, the sodium benzoate degradation assay indicated an enhanced benzene series removal ability of the engineering bacteria on activated sludge. Besides, we also demonstrated a controllable environmental risk of this engineered bacteria through monitoring its abundance and horizontal gene transfer test. Overall, the results of this study suggest an alternative strategy to solve multiple environmental problems through genetic engineering means and provide support for the application of engineered bacteria in environmental biotechnology.

Recursive genome engineering decodes the evolutionary origin of an essential thymidylate kinase activity in Pseudomonas putida KT2440

IMPORTANCE

Investigating fundamental aspects of metabolism is vital for advancing our understanding of the diverse biochemical capabilities and biotechnological applications of bacteria. The origin of the essential thymidylate kinase function in the model bacterium Pseudomonas putida KT2440, seemingly interrupted due to the presence of a large genomic island that disrupts the cognate gene, eluded a satisfactory explanation thus far. This is a first-case example of an essential metabolic function, likely acquired by horizontal gene transfer, which "landed" in a locus encoding the same activity. As such, foreign DNA encoding an essential dNMPK could immediately adjust to the recipient host-instead of long-term accommodation and adaptation. Understanding how these functions evolve is a major biological question, and the work presented here is a decisive step toward this direction. Furthermore, identifying essential and accessory genes facilitates removing those deemed irrelevant in industrial settings-yielding genome-reduced cell factories with enhanced properties and genetic stability.

Pesticide Use and Degradation Strategies: Food Safety, Challenges and Perspectives

While recognizing the gaps in pesticide regulations that impact consumer safety, public health concerns associated with pesticide contamination of foods are pointed out. The strategies and research directions proposed to prevent and/or reduce pesticide adverse effects on human health and the environment are discussed. Special attention is paid to organophosphate pesticides, as widely applied insecticides in agriculture, veterinary practices, and urban areas. Biotic and abiotic strategies for organophosphate pesticide degradation are discussed from a food safety perspective, indicating associated challenges and potential for further improvements. As food systems are endangered globally by unprecedented challenges, there is an urgent need to globally harmonize pesticide regulations and improve methodologies in the area of food safety to protect human health.

Creating an efficient 1,2-dichloroethane-mineralizing bacterium by a combination of pathway engineering and promoter engineering

Currently, 1,2-dichloroethane (DCA) is frequently detected in groundwater and has been listed as a potential human carcinogen by the U.S. EPA. Owing to its toxicity and recalcitrant nature, inefficient DCA mineralization has become a bottleneck of DCA bioremediation. In this study, the first engineered DCA-mineralizing strain KTU-P8DCA was constructed by functional assembly of DCA degradation pathway and enhancing pathway expression with a strong promoter P8 in the biosafety strain Pseudomonas putida KT2440. Strain KTU-P8DCA can metabolize DCA to produce CO₂ and utilize DCA as the sole carbon source for cell growth by quantifying ¹³C stable isotope ratios in collected CO₂ and in lyophilized cells. Strain KTU-P8DCA exhibited superior tolerance to high concentrations of DCA. Excellent genetic stability was also observed in continuous passage culture. Therefore, strain KTU-P8DCA has enormous potential for use in bioremediation of sites heavily contaminated with DCA. In the future, our strategy for pathway construction and optimization is expected to be developed as a standard pipeline for creating a wide variety of new contaminants-mineralizing microorganisms. The present study also highlights the power of synthetic biology in creating novel degraders for environmental remediation.

Microbe-Plant Interactions Targeting Metal Stress: New Dimensions for Bioremediation Applications

In the age of industrialization, numerous non-biodegradable pollutants like plastics, HMs, polychlorinated biphenyls, and various agrochemicals are a serious concern. These harmful toxic compounds pose a serious threat to food security because they enter the food chain through agricultural land and water. Physical and chemical techniques are used to remove HMs from contaminated soil. Microbial-metal interaction, a novel but underutilized strategy, might be used to lessen the stress caused by metals on plants. For reclaiming areas with high levels of heavy metal contamination, bioremediation is effective and environmentally friendly. In this study, the mechanism of action of endophytic bacteria that promote plant growth and survival in polluted soils-known as heavy metal-tolerant plant growth-promoting (HMT-PGP) microorganisms-and their function in the control of plant metal stress are examined. Numerous bacterial species, such as Arthrobacter, Bacillus, Burkholderia, Pseudomonas, and Stenotrophomonas, as well as a few fungi, such as Mucor, Talaromyces, Trichoderma, and Archaea, such as Natrialba and Haloferax, have also been identified as potent bioresources for biological clean-up. In this study, we additionally emphasize the role of plant growth-promoting bacteria (PGPB) in supporting the economical and environmentally friendly bioremediation of heavy hazardous metals. This study also emphasizes future potential and constraints, integrated metabolomics approaches, and the use of nanoparticles in microbial bioremediation for HMs.

Tween-80 enhanced biodegradation of naphthalene by Klebsiella quasipneumoniae

Accidental spillage of petroleum products and industrial activities result in various hydrocarbons in the environment. While the n-hydrocarbons are readily degraded, the polycyclic aromatic hydrocarbons (PAHs) are recalcitrant to natural degradation, toxic to aquatic life and are responsible for diverse health challenges in terrestrial animals; suggesting the need for faster and more eco-friendly ways of removing PAHs from the environment. In this study, the surfactant tween-80 was used to enhance a bacterium's intrinsic naphthalene biodegradation activity. Eight bacteria isolated from oil-contaminated soils were characterised using morphological and biochemical methods. The most effective strain was identified as Klebsiella quasipneumoniae using 16S rRNA gene analysis. High-Performance Liquid Chromatography (HPLC) analyses showed that the detectable concentration of naphthalene was decreased from 500 to 157.18 μg/mL (67.4%) after 7 d in the absence of tween-80, while 99.4% removal was achieved in 3 d in the presence of tween-80 at 60 μg/mL concentration. The peaks observed in the Fourier Transform Infra-Red Spectroscopy (FTIR) spectrum of control (naphthalene), which were absent in that of the metabolites, further established naphthalene degradation. Furthermore, Gas Chromatography-Mass Spectrometer (GCMS) revealed metabolites of single aromatic ring, such as 3,4-dihydroxybenzoic acid 4-hydroxylmethylphenol, which confirmed that the removal of naphthalene is by biodegradation. Tyrosinase induction and laccase activities suggested the involvement of these enzymes in naphthalene biodegradation by the bacterium. Conclusively, a strain of K. quasipneumoniae that can effectively remove naphthalene from contaminated environments has been isolated, and its biodegradation rate was doubled in the presence of non-ionic surfactant, tween-80.

Water potential governs the effector specificity of the transcriptional regulator XylR of Pseudomonas putida

The biodegradative capacity of bacteria in their natural habitats is affected by water availability. In this work, we have examined the activity and effector specificity of the transcriptional regulator XylR of the TOL plasmid pWW0 of Pseudomonas putida mt-2 for biodegradation of m-xylene when external water potential was manipulated with polyethylene glycol PEG8000. By using non-disruptive luxCDEAB reporter technology, we noticed that the promoter activated by XylR (Pu) restricted its activity and the regulator became more effector-specific towards head TOL substrates when cells were grown under water subsaturation. Such a tight specificity brought about by water limitation was relaxed when intracellular osmotic stress was counteracted by the external addition of the compatible solute glycine betaine. With these facts in hand, XylR variants isolated earlier as effector-specificity responders to the non-substrate 1,2,4-trichlorobenzene under high matric stress were re-examined and found to be unaffected by water potential in vivo. All these phenomena could be ultimately explained as the result of water potential-dependent conformational changes in the A domain of XylR and its effector-binding pocket, as suggested by AlphaFold prediction of protein structures. The consequences of this scenario for the evolution of specificities in regulators and the emergence of catabolic pathways are discussed.

Anaerobic biodegradation of polycyclic aromatic hydrocarbons

Although many anaerobic microorganisms that can degrade PAHs have been harnessed, there is still a large gap between laboratory achievements and practical applications. Here, we review the recent advances in the biodegradation of PAHs under anoxic conditions and highlight the mechanistic insights into the metabolic pathways and functional genes. Achievements of practical application and enhancing strategies of anaerobic PAHs bioremediation in soil were summarized. Based on the concerned issues during research, perspectives of further development were proposed including time-consuming enrichment, byproducts with unknown toxicity, and activity inhibition with low temperatures. In addition, meta-omics, synthetic biology and engineering microbiome of developing microbial inoculum for anaerobic bioremediation applications are discussed. We anticipate that integrating the theoretical research on PAHs anaerobic biodegradation and its successful application will advance the development of anaerobic bioremediation.

Environmental microbiome engineering for the mitigation of climate change

Environmental microbiome engineering is emerging as a potential avenue for climate change mitigation. In this process, microbial inocula are introduced to natural microbial communities to tune activities that regulate the long-term stabilization of carbon in ecosystems. In this review, we outline the process of environmental engineering and synthesize key considerations about ecosystem functions to target, means of sourcing microorganisms, strategies for designing microbial inocula, methods to deliver inocula, and the factors that enable inocula to establish within a resident community and modify an ecosystem function target. Recent work, enabled by high-throughput technologies and modeling approaches, indicate that microbial inocula designed from the top-down, particularly through directed evolution, may generally have a higher chance of establishing within existing microbial communities than other historical approaches to microbiome engineering. We address outstanding questions about the determinants of inocula establishment and provide suggestions for further research about the possibilities and challenges of environmental microbiome engineering as a tool to combat climate change.

Engineering Cyborg Bacteria Through Intracellular Hydrogelation

Natural and artificial cells are two common chassis in synthetic biology. Natural cells can perform complex tasks through synthetic genetic constructs, but their autonomous replication often causes safety concerns for biomedical applications. In contrast, artificial cells based on nonreplicating materials, albeit possessing reduced biochemical complexity, provide more defined and controllable functions. Here, for the first time, the authors create hybrid material-cell entities termed Cyborg Cells. To create Cyborg Cells, a synthetic polymer network is assembled inside each bacterium, rendering them incapable of dividing. Cyborg Cells preserve essential functions, including cellular metabolism, motility, protein synthesis, and compatibility with genetic circuits. Cyborg Cells also acquire new abilities to resist stressors that otherwise kill natural cells. Finally, the authors demonstrate the therapeutic potential by showing invasion into cancer cells. This work establishes a new paradigm in cellular bioengineering by exploiting a combination of intracellular man-made polymers and their interaction with the protein networks of living cells.

Petroleum Hydrocarbon Catabolic Pathways as Targets for Metabolic Engineering Strategies for Enhanced Bioremediation of Crude-Oil-Contaminated Environments

Anthropogenic activities and industrial effluents are the major sources of petroleum hydrocarbon contamination in different environments. Microbe-based remediation techniques are known to be effective, inexpensive, and environmentally safe. In this review, the metabolic-target-specific pathway engineering processes used for improving the bioremediation of hydrocarbon-contaminated environments have been described. The microbiomes are characterised using environmental genomics approaches that can provide a means to determine the unique structural, functional, and metabolic pathways used by the microbial community for the degradation of contaminants. The bacterial metabolism of aromatic hydrocarbons has been explained via peripheral pathways by the catabolic actions of enzymes, such as dehydrogenases, hydrolases, oxygenases, and isomerases. We proposed that by using microbiome engineering techniques, specific pathways in an environment can be detected and manipulated as targets. Using the combination of metabolic engineering with synthetic biology, systemic biology, and evolutionary engineering approaches, highly efficient microbial strains may be utilised to facilitate the target-dependent bioprocessing and degradation of petroleum hydrocarbons. Moreover, the use of CRISPR-cas and genetic engineering methods for editing metabolic genes and modifying degradation pathways leads to the selection of recombinants that have improved degradation abilities. The idea of growing metabolically engineered microbial communities, which play a crucial role in breaking down a range of pollutants, has also been explained. However, the limitations of the in-situ implementation of genetically modified organisms pose a challenge that needs to be addressed in future research.

A systematic review on the implementation of advanced and evolutionary biotechnological tools for efficient bioremediation of organophosphorus pesticides

Ever since the concept of bioremediation was introduced, microorganisms, microbial enzymes and plants have been used as principal elements for Organophosphate pesticide (OPP) bioremediation. The enzyme systems and genetic profile of these microbes have been studied deeply in past years. Plant growth promoting rhizobacteria (PGPR) are considered as one of the potential candidates for OPP bioremediation and has been widely used to stimulate the phytoremediation potential of plants. Constructed wetlands (CWs) in OPP biodegradation have brought new prospects to microcosm and mesocosm based remediation strategies. Application of synthetic biology has provided a new dimension to the field of OPP bioremediation by introducing concepts like, gene manipulation andediting, expression and regulation of catabolic enzymes, implementation of whole-cell based and enzyme based biosensor systems for the detection and monitoring of OPP pollution in both terrestrial and aquatic environment. System biology and bioinformatics tools have rendered significant knowledge regarding the genetic, enzymatic and biochemical aspects of microbes and plants thereby, helping researchers to analyze the mechanism of OPP biodegradation. Structural biology has provided significant conceptual information regarding OPP biodegradation pathways, structural and functional characterization of metabolites and enzymes, enzyme-pollutant interactions, etc. Therefore, this review discussed the prospects and challenges of most advanced and high throughput strategies implemented for OPP biodegradation. The review also established a comparative analysis of various bioremediation techniques and highlighted the interdependency among them. The review highly suggested the simultaneous implementation of more than one remediation strategy or a combinational approach creating an advantageous hybrid technique for OPP bioremediation.

Challenges and opportunities in bringing nonbiological atoms to life with synthetic metabolism

The relatively narrow spectrum of chemical elements within the microbial 'biochemical palate' limits the reach of biotechnology, because several added-value compounds can only be produced with traditional organic chemistry. Synthetic biology offers enabling tools to tackle this issue by facilitating 'biologization' of non-canonical chemical atoms. The interplay between xenobiology and synthetic metabolism multiplies routes for incorporating nonbiological atoms into engineered microbes. In this review, we survey natural assimilation routes for elements beyond the essential biology atoms [i.e., carbon (C), hydrogen (H), nitrogen (N), oxygen (O), phosphorus (P), and sulfur (S)], discussing how these mechanisms could be repurposed for biotechnology. Furthermore, we propose a computational framework to identify chemical elements amenable to biologization, ranking reactions suitable to build synthetic metabolism. When combined and deployed in robust microbial hosts, these approaches will offer sustainable alternatives for smart chemical production.

Implementing re-configurable biological computation with distributed multicellular consortia

The use of synthetic biological circuits to deal with numerous biological challenges has been proposed in several studies, but its implementation is still remote. A major problem encountered is the complexity of the cellular engineering needed to achieve complex biological circuits and the lack of general-purpose biological systems. The generation of re-programmable circuits can increase circuit flexibility and the scalability of complex cell-based computing devices. Here we present a new architecture to produce reprogrammable biological circuits that allow the development of a variety of different functions with minimal cell engineering. We demonstrate the feasibility of creating several circuits using only a small set of engineered cells, which can be externally reprogrammed to implement simple logics in response to specific inputs. In this regard, depending on the computation needs, a device composed of a number of defined cells can generate a variety of circuits without the need of further cell engineering or rearrangements. In addition, the inclusion of a memory module in the circuits strongly improved the digital response of the devices. The reprogrammability of biological circuits is an intrinsic capacity that is not provided in electronics and it may be used as a tool to solve complex biological problems.

The emerging potential of natural and synthetic algae-based microbiomes for heavy metal removal and recovery from wastewaters

Heavy Metal (HM) bioremoval by microbes is a successful, environment-friendly technique, particularly at low concentrations of HMs. Studies using algae, bacteria, and fungi reveal promising capabilities in isolation and when used in consortia. Yet, few reviews have emphasized individual and collective HM removal rates and the associated mechanisms in natural or synthetic microbiomes. Besides discussing the limitations of conventional and synthetic biology approaches, this review underscores the utility of indigenous microbial taxon, i.e., algae, fungi, and bacteria, in HM removal with adsorption capacities and their synergistic role in microbiome-led studies. The detoxification mechanisms studied for certain HMs indicate distinctive removal pathways in each taxon which points to an enhanced effect when used as a microbiome. The role and higher efficacies of the designer microbiomes with complementing and mutualistic taxa are also considered, followed by recovery options for a circular bioeconomy. The citation network analysis further validates the multi-metal removal ability of microbiomes and the restricted capabilities of the individual counterparts. In precis, the study reemphasizes increased metal removal efficiencies of inter-taxon microbiomes and the mechanisms for synergistic and improved removal, eventually drawing attention to the benefits of ecological engineering approaches compared to other alternatives.

Feedforward growth rate control mitigates gene activation burden

Heterologous gene activation causes non-physiological burden on cellular resources that cells are unable to adjust to. Here, we introduce a feedforward controller that actuates growth rate upon activation of a gene of interest (GOI) to compensate for such a burden. The controller achieves this by activating a modified SpoT enzyme (SpoTH) with sole hydrolysis activity, which lowers ppGpp level and thus increases growth rate. An inducible RelA+ expression cassette further allows to precisely set the basal level of ppGpp, and thus nominal growth rate, in any bacterial strain. Without the controller, activation of the GOI decreased growth rate by more than 50%. With the controller, we could activate the GOI to the same level without growth rate defect. A cell strain armed with the controller in co-culture enabled persistent population-level activation of a GOI, which could not be achieved by a strain devoid of the controller. The feedforward controller is a tunable, modular, and portable tool that allows dynamic gene activation without growth rate defects for bacterial synthetic biology applications.

Burkholderia vietnamiensis G4 as a biological agent in bioremediation processes of polycyclic aromatic hydrocarbons in sludge farms

Polycyclic aromatic hydrocarbons (PAHs) are one of the main pollutants generated by the refining and use of oil. To search bioremediation alternatives for these compounds, mainly in situ, considering the biotic and abiotic variables that affect the contaminated sites is determinant for the success of bioremediation techniques. In this study, bioremediation strategies were evaluated in situ, including biostimulation and bioaugmentation for 16 priority PAHs present in activated sludge farms. B. vietnamiensis G4 was used as a biodegradation agent for bioaugmentation tests. The analyses occurred for 12 months, and temperature and humidity were measured to verify the effects of these factors on the biodegradation. We used the technique GC-MS to evaluate and quantify the degradation of PAHs over the time of the experiment. Of the four treatments applied, bioaugmentation with quarterly application proved to be the best strategy, showing the degradation of compounds of high (34.4% annual average) and low (21.9% annual average) molecular weight. A high degradation rate for high molecular weight compounds demonstrates that this technique can be successfully applied in bioremediation of areas with compounds considered toxic and stable in nature, contributing to the mitigation of impacts generated by PAHs.

How has microbiology changed 200 years after Pasteur's birth?

The last two centuries have seen major scientific and technological advances that have turned the field of microbiology upside down. If Louis Pasteur came out of his vault to celebrate his two hundredth birthday with us, would he recognize the field of study of which he was one of the founders? Are the objectives of the discipline still the same? What is the influence of new technologies on our scientific approach? What are the new horizons and future challenges?

Engineering microbes for enhancing the degradation of environmental pollutants: A detailed review on synthetic biology

Anthropogenic activities resulted in the deposition of huge quantities of contaminants such as heavy metals, dyes, hydrocarbons, etc into an ecosystem. The serious ill effects caused by these pollutants to all living organisms forced in advancement of technology for degrading or removing these pollutants. This degrading activity is mostly depending on microorganisms owing to their ability to survive in harsh adverse conditions. Though native strains possess the capability to degrade these pollutants the development of genetic engineering and molecular biology resulted in engineering approaches that enhanced the efficiency of microbes in degrading pollutants at faster rate. Many bioinformatics tools have been developed for altering/modifying genetic content in microbes to increase their degrading potency. This review provides a detailed note on engineered microbes - their significant importance in degrading environmental contaminants and the approaches utilized for modifying microbes. The genes responsible for degrading the pollutants have been identified and modified fir increasing the potential for quick degradation. The methods for increasing the tolerance in engineered microbes have also been discussed. Thus engineered microbes prove to be effective alternate compared to native strains for degrading pollutants.

Remediation techniques for elimination of heavy metal pollutants from soil: A review

Contaminated soil containing toxic metals and metalloids is found everywhere globally. As a consequence of adsorption and precipitation reactions, metals are comparatively immobile in subsurface systems. Hence remediation techniques in such contaminated sites have targeted the solid phase sources of metals such as sludges, debris, contaminated soils, or wastes. Over the last three decades, the accumulation of these toxic substances inside the soil has increased dramatically, putting the ecosystem and human health at risk. Pollution of heavy metal have posed severe impacts on human, and it affects the environment in different ways, resulting in industrial anger in many countries. Various procedures, including chemical, biological, physical, and integrated approaches, have been adopted to get rid of this type of pollution. Expenditure, timekeeping, planning challenges, and state-of-the-art gadget involvement are some drawbacks that need to be properly handled. Recently in situ metal immobilization, plant restoration, and biological methods have changed the dynamics and are considered the best solution for removing metals from soil. This review paper critically evaluates and analyzes the numerous approaches for preparing heavy metal-free soil by adopting different soil remediation methods.

Trends and thresholds on bacterial degradation of bisphenol-A endocrine disruptor - a concise review

Bisphenol-A (BPA) is a monomer found in polycarbonate plastics, food cans, and other everyday chemicals; this monomer and its counterparts are widely used, culminating in its presence in water, soil, sediment, and the atmosphere. Furthermore, because of its estrogenic and genotoxic properties, it has been acknowledged as an endocrine disruptor; contamination of BPA in the environment is becoming a growing concern, and ways to effectively mitigate BPA from the environment are currently explored. Hence, the focal point of the review is to collate the bacterial degradation of BPA with the proposed degradation mechanism, explicitly focusing on researches published between 2017 and 2022. BPA breakdown is dependent primarily on bacterial metabolism, although numerous factors influence its fate in the environment. The metabolic routes for BPA breakdown in crucial bacterial strains were postulated, sourced on the transformed metabolite-intermediates perceived through degradation; enzymes and genes associated with the bacterial degradation of BPA have also been included in this review. This review will be momentous to generate a conceptual strategy and stimulate the progress on bacterial mitigation of BPA as a path to a sustainable cleaner environment.

A critical review of oil spills in the Niger Delta aquatic environment: causes, impacts, and bioremediation assessment

The Niger Delta region in South-South Nigeria, on Africa's West Coast, is densely populated. The region, which contains a substantial stock of crude oil and natural gas, has been nicknamed "the engine room" for Nigeria's economic development and progress. It is responsible for up to 90% of the country's economic growth (or gross domestic product/GDP). The region has multiple ecosystems, such as the aquatic environment, that are critical to the survival of the area's various habitats and living species. However, the same region has witnessed unjustifiable environmental pollution arising from oil activities over the years of exploration and production which has orchestrated negative consequences on the Niger Delta ecosystem. This has led to extended negative consequences on natural resources, which also have detrimental repercussions psychologically, ecologically, socially, economically, and physically which, in turn, impacts the overall health of the affected individuals. This write-up provides an overview of the major drivers of the oil leakage in Nigeria's Niger Delta ecosystem as well as the major impacts on the environment. It will also analyze numerous means of remediation in use and extend such for a more inclusive and productive option. Moreover, this review offers key measures that may help to maintain long-term policies for reducing adverse implications and increasing the living standard for the Niger Delta area's affected communities.

Iron-dependent mutualism between Chlorella sorokiniana and Ralstonia pickettii forms the basis for a sustainable bioremediation system

Phototrophic communities of autotrophic microalgae and heterotrophic bacteria perform complex tasks of nutrient acquisition and tackling environmental stress but remain underexplored as a basis for the bioremediation of emerging pollutants. In industrial monoculture designs, poor iron uptake by microalgae limits their productivity and biotechnological efficacy. Iron supplementation is expensive and ineffective because iron remains insoluble in an aqueous medium and is biologically unavailable. However, microalgae develop complex interkingdom associations with siderophore-producing bacteria that help solubilize iron and increase its bioavailability. Using dye degradation as a model, we combined environmental isolations and synthetic ecology as a workflow to design a simplified microbial community based on iron and carbon exchange. We established a mutualism between the previously non-associated alga Chlorella sorokiniana and siderophore-producing bacterium Ralstonia pickettii. Siderophore-mediated increase in iron bioavailability alleviated Fe stress for algae and increased the reductive iron uptake mechanism and bioremediation potential. In exchange, C. sorokiniana produced galactose, glucose, and mannose as major extracellular monosaccharides, supporting bacterial growth. We propose that extracellular iron reduction by ferrireductase is crucial for azoreductase-mediated dye degradation in microalgae. These results demonstrate that iron bioavailability, often overlooked in cultivation, governs microalgal growth, enzymatic processes, and bioremediation potential. Our results suggest that phototrophic communities with an active association for iron and carbon exchange have the potential to overcome challenges associated with micronutrient availability, while scaling up bioremediation designs.

A review on biosurfactant producing bacteria for remediation of petroleum contaminated soils

The discharge of potentially toxic petroleum hydrocarbons into the environment has been a matter of concern, as these organic pollutants accumulate in many ecosystems due to their hydrophobicity and low bioavailability. Petroleum hydrocarbons are neurotoxic and carcinogenic organic pollutants, extremely harmful to human and environmental health. Traditional treatment methods for removing hydrocarbons from polluted areas, including various mechanical and chemical strategies, are ineffective and costly. However, many indigenous microorganisms in soil and water can utilise hydrocarbon compounds as sources of carbon and energy and hence, can be employed to degrade hydrocarbon contaminants. Therefore, bioremediation using bacteria that degrade petroleum hydrocarbons is commonly viewed as an environmentally acceptable and effective method. The efficacy of bioremediation can be boosted further by using potential biosurfactant-producing microorganisms, as biosurfactants reduce surface tension, promote emulsification and micelle formation, making hydrocarbons bio-available for microbial breakdown. Further, introducing nanoparticles can improve the solubility of hydrophobic hydrocarbons as well as microbial synthesis of biosurfactants, hence establishing a favourable environment for microbial breakdown of these chemicals. The review provides insights into the role of microbes in the bioremediation of soils contaminated with petroleum hydrocarbons and emphasises the significance of biosurfactants and potential biosurfactant-producing bacteria. The review partly focusses on how nanotechnology is being employed in different critical bioremediation processes.

Environmental Galenics: large-scale fortification of extant microbiomes with engineered bioremediation agents

Contemporary synthetic biology-based biotechnologies are generating tools and strategies for reprogramming genomes for specific purposes, including improvement and/or creation of microbial processes for tackling climate change. While such activities typically work well at a laboratory or bioreactor scale, the challenge of their extensive delivery to multiple spatio-temporal dimensions has hardly been tackled thus far. This state of affairs creates a research niche for what could be called Environmental Galenics (EG), i.e. the science and technology of releasing designed biological agents into deteriorated ecosystems for the sake of their safe and effective recovery. Such endeavour asks not just for an optimal performance of the biological activity at stake, but also the material form and formulation of the agents, their propagation and their interplay with the physico-chemical scenario where they are expected to perform. EG also encompasses adopting available physical carriers of microorganisms and channels of horizontal gene transfer as potential paths for spreading beneficial activities through environmental microbiomes. While some of these propositions may sound unsettling to anti-genetically modified organisms sensitivities, they may also fall under the tag of TINA (there is no alternative) technologies in the cases where a mere reduction of emissions will not help the revitalization of irreversibly lost ecosystems.

This article is part of the theme issue ‘Ecological complexity and the biosphere: the next 30 years’.

Functional characterization of prokaryotic dark matter: the road so far and what lies ahead

Eight-hundred thousand to one trillion prokaryotic species may inhabit our planet. Yet, fewer than two-hundred thousand prokaryotic species have been described. This uncharted fraction of microbial diversity, and its undisclosed coding potential, is known as the "microbial dark matter" (MDM). Next-generation sequencing has allowed to collect a massive amount of genome sequence data, leading to unprecedented advances in the field of genomics. Still, harnessing new functional information from the genomes of uncultured prokaryotes is often limited by standard classification methods. These methods often rely on sequence similarity searches against reference genomes from cultured species. This hinders the discovery of unique genetic elements that are missing from the cultivated realm. It also contributes to the accumulation of prokaryotic gene products of unknown function among public sequence data repositories, highlighting the need for new approaches for sequencing data analysis and classification. Increasing evidence indicates that these proteins of unknown function might be a treasure trove of biotechnological potential. Here, we outline the challenges, opportunities, and the potential hidden within the functional dark matter (FDM) of prokaryotes. We also discuss the pitfalls surrounding molecular and computational approaches currently used to probe these uncharted waters, and discuss future opportunities for research and applications.

Amelioration of aluminum phytotoxicity in Solanum lycopersicum by co-inoculation of plant growth promoting Kosakonia radicincitans strain CABV2 and Streptomyces corchorusii strain CASL5

Aluminum (Al) toxicity is the main constraint for crop cultivation in acidic soils. In this study, Al-tolerant rhizobacteria Kosakonia radicincitans (CABV2) and actinobacteria Streptomyces corchorusii (CASL5) were isolated from Beta vulgaris rhizosphere in acidic soil. Both isolates displayed high tolerance to Al (10 mM), produce siderophores, indole-3-acetic acid, 1-aminocyclopropane-1-carboxylate and solubilize phosphate. Co-inoculation of CABV2 and CASL5 strains were significantly increased the root length (312.90%), shoot length (183.19%), fresh weight (224.82%), dry weight (309.25%) and photosynthetic pigments (chlorophyll a 279.69%, chlorophyll b 188.23% and carotenoids 158.20%) of Solanum lycopersicum plants under 300 mg Al kg^-1 soil conditions as compared to uninoculated Al stressed plants. Similarly, the co-inoculation treated plants subjected to Al stress condition enhanced the uptake of essential nutrients (N 229%, P 252%, K 115%, Fe 185%, Mg 345% and Ca 202%) by plants as compared to Al stressed uninoculated plants. Under Al stress (300 mg Al kg^-1 soil), co-inoculation significantly decreased malondialdehyde content (66%), and increased catalase (83%), superoxide dismutase (82%), peroxidase (89%) activities and root exudates (organic acids 6.44-12.36 fold) in S. lycopersicum as compared to uninoculated plants, indicating that the CABV2 and CASL5 strains were reduced Al-induced oxidative stress. Moreover, co-inoculation significantly reduced Al accumulation in the root (89%), stem (95%) and leaves (94%) of S. lycopersicum under Al stress at 300 mg Al kg^-1 soil, compared to the uninoculated plants. This is the first report of K. radicincitans strain CABV2 and S. corchorusii strain CASL5 potentially reducing Al uptake in S. lycopersicum.

Advances in Biochar and PGPR engineering system for hydrocarbon degradation: A promising strategy for environmental remediation

In soil, polycyclic aromatic hydrocarbons (PAHs) have resulted in severe environmental deterioration, compromised soil characteristics, and negatively affect all life forms, including humans. Developing appropriate and effective clean-up technology is crucial in solving the contamination issues. The traditional methods to treat PHAs contaminated soil are less effective and not ecofriendly. Bioremediation, based on bioaugmentation and biostimulation approaches, is a promising strategy for remediating contaminated soil. The use of plant growth-promoting rhizobacteria (PGPR) as a bioaugmentation tool is an effective technique for treating hydrocarbon contaminated soil. Plant growth-promoting rhizobacteria (PGPR) are group of rhizospheric bacteria that colonize the roots of plants. Biochar is a carbon-rich residue, which acts as a source of nutrients, and is also a bio-stimulating candidate to enhance the activities of oil-degrading bacteria. The application of biochar as a nutrient source to bioremediate oil-contaminated soil is a promising approach for reducing PHA contamination. Biochar induces polyaromatic hydrocarbons (PAHs) immobilization and removes the contaminants by various methods such as ion exchange electrostatic attractions and volatilization. In comparison, PGPR produce multiple types of biosurfactants to enhance the adsorption of hydrocarbons and mineralize the hydrocarbons with the conversion to less toxic substances. During the last few decades, the use of PGPR and biochar in the bioremediation of hydrocarbons-contaminated soil has gained greater importance. Therefore, developing and applying a PGPR-biochar-based remediating system can help manage hazardous PAH contaminated soil. The goal of this review paper is to (i) provide an overview of the PGPR mechanism for degradation of hydrocarbons and (ii) discuss the contaminants absorbent by biochar and its characteristics (iii) critically discuss the combined effect of PGPR and biochar for degradation of hydrocarbons by decreasing their mobility and bioavailability. The present review focuses on techniques of bioaugmentation and biostimulation based on use of PGPR and biochar in remediating the oil-contaminated soil.

Dimethoate residues in Pakistan and mitigation strategies through microbial degradation: a review

Organophosphate pesticides (OPs) are used extensively for crop protection worldwide due to their high water solubility and relatively low persistence in the environment compared to other pesticides, such as organochlorines. Dimethoate is a broad-spectrum insecticide that belongs to the thio-organophosphate group of OPs. It is applied to cash crops, animal farms, and houses. It has been used in Pakistan since the 1960s, either alone or in a mixture with other OPs or pyrethroids. However, the uncontrolled use of this pesticide has resulted in residual accumulation in water, soil, and tissues of plants via the food chain, causing toxic effects. This review article has compiled and analyzed data reported in the literature between 1998 and 2021 regarding dimethoate residues and their microbial bioremediation. Different microorganisms such as bacteria, fungi, and algae have shown potential for bioremediation. However, an extensive role of bacteria has been observed compared to other microorganisms. Twenty bacterial, three fungal, and one algal genus with potential for the remediation of dimethoate have been assessed. Active bacterial biodegraders belong to four classes (i) alpha-proteobacteria, (ii) gamma-proteobacteria, (iii) beta-proteobacteria, and (iv) actinobacteria and flavobacteria. Microorganisms, especially bacterial species, are a sustainable technology for dimethoate bioremediation from environmental samples. Yet, new microbial species or consortia should be explored.

Are Wetlands as an Integrated Bioremediation System Applicable for the Treatment of Wastewater from Underground Coal Gasification Processes?

Underground coal gasification (UCG) can be considered as one of the clean coal technologies. During the process, the gas of industrial value is produced, which can be used to produce heat and electricity, liquid fuels or can replace natural gas in chemistry. However, UCG does carry some environmental risks, mainly related to potential negative impacts on surface and groundwater. Wastewater and sludge from UCG contain significant amounts of aliphatic and aromatic hydrocarbons, phenols, ammonia, cyanides and hazardous metals such as arsenic. This complicated matrix containing high concentrations of hazardous pollutants is similar to wastewater from the coke industry and, similarly to them, requires complex mechanical, chemical and biological treatment. The focus of the review is to explain how the wetlands systems, described as one of bioremediation methods, work and whether these systems are suitable for removing organic and inorganic contaminants from heavily contaminated industrial wastewater, of which underground coal gasification wastewater is a particularly challenging example. Wetlands appear to be suitable systems for the treatment of UCG wastewater and can provide the benefits of nature-based solutions. This review explains the principles of constructed wetlands (CWs) and provides examples of industrial wastewater treated by various wetland systems along with their operating principles. In addition, the physicochemical characteristics of the wastewater from different coal gasifications under various conditions, obtained from UCG’s own experiments, are presented.