Targeted bone remodeling involves BMU steering as well as activation

Advances in mechanobiological pharmacokinetic-pharmacodynamic models of osteoporosis treatment - Pathways to optimise and exploit existing therapies

Osteoporosis (OP) is a chronic progressive bone disease which is characterised by reduction of bone matrix volume and changes in the bone matrix properties which can ultimately lead to bone fracture. The two major forms of OP are related to aging and/or menopause. With the worldwide increase of the elderly population, particularly age-related OP poses a serious health issue which puts large pressure on health care systems. A major challenge for development of new drug treatments for OP and comparison of drug efficacy with existing treatments is due to current regulatory requirements which demand testing of drugs based on bone mineral density (BMD) in phase 2 trials and fracture risk in phase 3 trials. This requires large clinical trials to be conducted and to be run for long time periods, which is very costly. This, together with the fact that there are already many drugs available for treatment of OP, makes the development of new drugs inhibitive. Furthermore, an increased trend of the use of different sequential drug therapies has been observed in OP management, such as sequential anabolic-anticatabolic drug treatment or switching from one anticatabolic drug to another. Running clinical trials for concurrent and sequential therapies is neither feasible nor practical due to large number of combinatorial possibilities. In silico mechanobiological pharmacokinetic-pharmacodynamic (PK-PD) models of OP treatments allow predictions beyond BMD, i.e. bone microdamage and degree of mineralisation can also be monitored. This will help to inform clinical drug usage and development by identifying the most promising scenarios to be tested clinically (confirmatory trials rather than exploratory only trials), optimise trial design and identify subgroups of the population that show benefit-risk profiles (both good and bad) that are different from the average patient. In this review, we provide examples of the predictive capabilities of mechanobiological PK-PD models. These include simulation results of PMO treatment with denosumab, implications of denosumab drug holidays and coupling of bone remodelling models with calcium and phosphate systems models that allows to investigate the effects of co-morbidities such as hyperparathyroidism and chronic kidney disease together with calcium and vitamin D status on drug efficacy.

Glucocorticoids disrupt longitudinal advance of cortical bone basic multicellular units in the rabbit distal tibia

Glucocorticoids (GCs) are the leading cause of secondary osteoporosis. The emerging perspective, derived primarily from 2D histological study of trabecular bone, is that GC-induced bone loss arises through the uncoupling of bone formation and resorption at the level of the basic multicellular units (BMUs), which carry out bone remodeling. Here we explore the impact of GCs on cortical bone remodeling in the rabbit model. Based upon the rapid reduction of bone formation and initial elevation of resorption caused by GCs, we hypothesized that the rate of advance (longitudinal erosion rate; LER) of cortical BMUs would be increased. To test this hypothesis we divided 20 female New Zealand White rabbits into four experimental groups: ovariohysterectomy (OVH), glucocorticoid (GC), OVH + GC and SHAM controls (n = 5 animals each). Ten weeks post-surgery (OVH or sham), and two weeks after the initiation of dosing (daily subcutaneous injections of 1.5 mg/kg of methylprednisolone sodium succinate in the GC-treated groups and 1 ml of saline for the others), the right tibiae were scanned in vivo using Synchrotron Radiation (SR) in-line phase contrast micro-CT at the Canadian Light Source. After an additional 2 weeks of dosing, the rabbits were euthanized and ex vivo images were collected using desktop micro-CT. The datasets were co-registered in 3D and LER was calculated as the distance traversed by BMU cutting-cones in the 14-day interval between scans. Counter to our hypothesis, LER was greatly reduced in GC-treated rabbits. Mean LER was lower in GC (4.27 μm/d; p < 0.001) and OVH + GC (4.19 μm/d; p < 0.001), while similar in OVH (40.13 μm/d; p = 0.990), compared to SHAM (40.44 μm/d). This approximately 90 % reduction in LER with GCs was also associated with an overall disruption of BMU progression, with radial expansion of the remodeling space occurring in all directions. This unexpected outcome suggests that GCs do not simply uncouple formation and resorption within cortical BMUs and highlights the value of the time-lapsed 4D approach employed.

Intracortical remodelling increases in highly loaded bone after exercise cessation

Resorption within cortices of long bones removes excess mass and damaged tissue and increases during periods of reduced mechanical loading. Returning to high-intensity exercise may place bones at risk of failure due to increased porosity caused by bone resorption. We used point-projection X-ray microscopy images of bone slices from highly loaded (metacarpal, tibia) and minimally loaded (rib) bones from 12 racehorses, 6 that died during a period of high-intensity exercise and 6 that had a period of intense exercise followed by at least 35 days of rest prior to death, and measured intracortical canal cross-sectional area (Ca.Ar) and number (N.Ca) to infer remodelling activity across sites and exercise groups. Large canals that are the consequence of bone resorption (Ca.Ar >0.04 mm2 ) were 1.4× to 18.7× greater in number and area in the third metacarpal bone from rested than exercised animals (p = 0.005-0.008), but were similar in number and area in ribs from rested and exercised animals (p = 0.575-0.688). An intermediate relationship was present in the tibia, and when large canals and smaller canals that result from partial bony infilling (Ca.Ar >0.002 mm2 ) were considered together. The mechanostat may override targeted remodelling during periods of high mechanical load by enhancing bone formation, reducing resorption and suppressing turnover. Both systems may work synergistically in rest periods to remove excess and damaged tissue.

Prevalence of drifting osteons distinguishes human bone

The histological, or microscopic, appearance of bone tissue has long been studied to identify species-specific traits. There are several known histological characteristics to discriminate animal bone from human, but currently no histological characteristic that has been consistently identified in human bone exclusive to other mammals. The drifting osteon is a rare morphotype found in human long bones and observationally is typically absent from common mammalian domesticates. We surveyed previously prepared undecalcified histological sections from 25 species (human n = 221; nonhuman primate n = 24; nonprimate n = 169) to see if 1) drifting osteons were indeed more common in humans and 2) this could be a discriminating factor to identify human bone histologically. We conclude that drifting osteons are indeed more prevalent in human and nonhuman primate bone relative to nonprimate mammalian bone. Two criteria identify a rib or long bone fragment as human, assuming the fragment is unlikely to be from a nonhuman primate given the archaeological context: 1) at least two drifting osteons are present in the cross-section and 2) a drifting osteon prevalence (or as a percentage of total secondary osteons) of ≥ 1%. We present a quantitative histological method that can positively discriminate human bone from nonprimate mammalian bone in archaeological contexts.

Direct Assessment of Rabbit Cortical Bone Basic Multicellular Unit Longitudinal Erosion Rate: A 4D Synchrotron-Based Approach

Cortical bone remodeling is carried out by basic multicellular units (BMUs), which couple resorption to formation. Although fluorochrome labeling has facilitated study of BMU formative parameters since the 1960s, some resorptive parameters, including the longitudinal erosion rate (LER), have remained beyond reach of direct measurement. Indeed, our only insights into this spatiotemporal parameter of BMU behavior come from classical studies that indirectly inferred LER. Here, we demonstrate a 4D in vivo method to directly measure LER through in-line phase contrast synchrotron imaging. The tibias of rabbits (n = 15) dosed daily with parathyroid hormone were first imaged in vivo (synchrotron micro-CT; day 15) and then ex vivo 14 days later (conventional micro-CT; day 29). Mean LER assessed by landmarking the co-registered scans was 23.69 ± 1.73 μm/d. This novel approach holds great promise for the direct study of the spatiotemporal coordination of bone remodeling, its role in diseases such as osteoporosis, as well as related treatments. © 2022 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).

Computational study of the mechanical influence of lacunae and perilacunar zones in cortical bone microcracking

The mechanical behavior of cortical bone is influenced by microstructural components such as osteons, Haversian canals, and osteocyte lacunae that arise from biological remodeling processes. This study takes a computational approach to investigate the role of the perilacunar zones formed by the local remodeling processes of lacunar-dwelling osteocytes by utilizing phase-field finite element models based on histological imaging of human bone. The models simulated the microdamage accumulation that occurs in cortical bone under transverse compression in bone without lacunae, with lacunae, and with a perilacunar zone surrounding lacunae in order to investigate the role of these features. The results of the simulations found that while lacunae create stress concentration which initiate further damage, perilacunar regions can delay or prevent the emergence and growth of microcracks.

Closing the osteon: Do osteocytes sense strain rate rather than fluid flow?

Osteons are cylindrical structures of bone created by matrix resorbing osteoclasts, followed by osteoblasts that deposit new bone. Osteons align with the principal loading direction and it is thought that the osteoclasts are directed by osteocytes, the mechanosensitive cells that reside inside the bone matrix. These osteocytes are presumably controlled by interstitial fluid flow, induced by the physiological loading of bones. Here I consider the stimulation of osteocytes while the osteon is closed by osteoblasts. In a conceptual finite element model, bone is considered a poro-elastic material and subjected to locomotion-induced loading conditions. It appears that the magnitude of flow is constant along the closing cone, while shear strain rate in the bone matrix diminishes linearly with the deposition of bone. This suggests that shear strain rate, rather than fluid flow, is the physical cue that controls osteocytes and bone deposition in newly formed osteons.

Remodelling of trabecular bone in human distal tibia: A model based on an in-vivo HR-pQCT study

An abnormal remodelling process of bones can lead to various bone disorders, such as osteoporosis, making them prone to fracture. Simulations of load-induced remodelling of trabecular bone were used to investigate its response to mechanical signal. However, the role of mechanostat in trabecular-bone remodelling has not yet been investigated in simulations underpinned by a longitudinal in-vivo study in humans. In this work, a finite-element model based on a 6-month longitudinal in-vivo HR-pQCT study was developed and validated to investigate the effect of mechanical stimuli on bone remodelling. The simulated changes in microstructural parameters and density of trabecular bone were compared with respective experimental results. A maximum principal strain (MPS) and a maximum principal strain gradient (∇MPS) were used as mechanical signals to drive a five-stage mechanostat remodelling model, including additional over-strain and damage stages. It was found that the density distribution varied with the studied mechanical signals, along with decreasing with time levels of bone volume fraction BV/TV, trabecular thickness Tb.Th and bone surface area Tb.BS as well as increased trabecular separation Tb.Sp. Among these parameters, BV/TV and Tb.Th together with the bone-remodelling parameters from the MPS model demonstrated a significant correlation with the experimental data. The developed model provides a good foundation for further development and investigation of the relationships between mechanical loading and human-bone microarchitecture.

Material properties of bighorn sheep (Ovis canadensis) horncore bone with implications for energy absorption during impacts

Bighorn sheep rams participate in high impact head-butting without overt signs of brain injury, thus providing a naturally occurring animal model for studying brain injury mitigation. Previously published finite element modeling showed that both the horn and bone materials play important roles in reducing brain cavity accelerations during ramming. However, in that study the elastic modulus of bone was assumed to be similar to that of human bone since the modulus of ram bone was unknown. Therefore, the goal of this study was to quantify the mechanical properties, mineral content, porosity, and microstructural organization of horncore cortical bone from juvenile and adult rams. Mineral content and elastic modulus increased with horn size, and porosity decreased. However, modulus of toughness did not change with horn size. This latter finding raises the possibility that the horncore cortical bone has not adapted exceptional toughness despite an extreme loading environment and may function primarily as an interface material between the horn and the porous bone within the horncore. Thus, geometric properties of the horn and horncore, including the porous bone architecture, may be more important for energy absorption during ramming than the horncore cortical bone. Results from this study can be used to improve accuracy of finite element models of bighorn sheep ramming to investigate these possibilities moving forward.

Three-dimensional microstructures of the intracortical canals in the animal model of osteoporosis

Osteoporosis is a major disease in aged women, increasing the risk for fractures accompanied by changes in the microarchitecture. The aim of this study was to investigate the three-dimensional (3D) histomorphology of femur diaphysis in the animal model for postmenopausal osteoporosis. The cortical bone of femur diaphysis of the rat was serially sectioned at a thickness of 5 mm and evaluated age-associated changes of the intracortical (osteonal) canal networks three-dimensionally. Cortical microstructures of 10-month old rats were not affected by ovariectomy. Intracortical canal networks were radial toward endosteal aspect and frequently interconnected across the neighboring canals with short arciform and irregular canals reminiscent for resorption spaces in ovarectomized 16-month old rats, contrary to intact canals in 16-month old control rat. Increased proportion of the periosteal circumference lamella and deformed endosteal regions with rare cortical canals hampered reconstructive histomorphology in ovarectomized rats of 26 month age. We have shown that 3D reconstruction of rat femur of the aged model over 16-month old is suitable methods that evaluate and microstructural change of the intracortical canals and cortical bone porosity by estrogen depletion.

Gradient fluid shear stress regulates migration of osteoclast precursors

Cell migration is highly sensitive to fluid shear stress (FSS) in blood flow or interstitial fluid flow. However, whether the FSS gradient can regulate the migration of cells remains unclear. In this work, we constructed a parallel-plate flow chamber with different FSS gradients and verified the gradient flow field by particle image velocimetry measurements and finite element analyses. We then investigated the effect of FSS magnitudes and gradients on the migration of osteoclast precursor RAW264.7 cells. Results showed that the cells sensed the FSS gradient and migrated toward the low-FSS region. This FSS gradient-induced migration tended to occur in low-FSS magnitudes and high gradients, e.g., the migration angle relative to flow direction was approximately 90° for 0.1 Pa FSS and 0.2 Pa mm⁻¹ FSS gradient. When chemically inhibiting the calcium signaling pathways of the mechanosensitive cation channel, endoplasmic reticulum, phospholipase C, and extracellular calcium, the cell migration toward the low-FSS region was significantly reduced. This study may provide insights into the mechanism of the recruitment of osteoclast precursors at the site of bone resorption and of mechanical stimulation-induced bone remodeling.

Ovariectomy Activates Chronic Low-Grade Inflammation Mediated by Memory T Cells, Which Promotes Osteoporosis in Mice

The loss of estrogen (E₂ ) initiates a rapid phase of bone loss leading to osteoporosis in one-half of postmenopausal women, but the mechanism is not fully understood. Here, we show for the first time how loss of E₂ activates low-grade inflammation to promote the acute phase of bone catabolic activity in ovariectomized (OVX) mice. E₂ regulates the abundance of dendritic cells (DCs) that express IL-7 and IL-15 by inducing the Fas ligand (FasL) and apoptosis of the DC. In the absence of E₂ , DCs become long-lived, leading to increased IL-7 and IL-15. We find that IL-7 and IL-15 together, but not alone, induced antigen-independent production of IL-17A and TNFα in a subset of memory T cells (T_MEM ). OVX of mice with T-cell-specific ablation of IL15RA showed no IL-17A and TNFα expression, and no increase in bone resorption or bone loss, confirming the role of IL-15 in activating the T_MEM and the need for inflammation. Our results provide a new mechanism by which E₂ regulates the immune system, and how menopause leads to osteoporosis. The low-grade inflammation is likely to cause or contribute to other comorbidities observed postmenopause. © 2020 American Society for Bone and Mineral Research.

Reliability-Based Design Optimization of a Cemented Prosthesis in a Femur Undergoing Bone Remodeling

This study proposes a numerical methodology to minimize the bone mass loss in a femur with a total hip arthroplasty procedure, considering uncertainties in the material parameters and using a reliability-based design optimization (RBDO) procedure. A genetic algorithm (GA) is applied for optimization, and a three-dimensional finite element (FE) model associated with the bone remodeling procedure is proposed and described to account for the internal and external femoral bone behavior. An example of a femoral prosthesis design is presented as a basis for discussion of the proposed methodologies, and the corresponding reliability level is evaluated. Constraints on the strength of all materials and target reliability levels are inputs to the optimization model. The main prosthesis dimensions and Young modulus are the design variables. The proposed methodology is compared with a well-known deterministic optimization (DO) procedure and the results show that it is important to consider the uncertainties in this kind of problem since in this case, the a posteriori reliability may be low.

Relation between cross-sectional bone geometry and double zonal osteon frequency and morphology

OBJECTIVES

While double-zonal osteons (DZ) are characterized by a hyper-mineralized ring inside their lamellae, recent findings suggest that this ring is also defined by a change in the collagen fibers' orientation. Collagen and minerals are essential components to the maintenance of adequate bone strength and their alteration can modify the mechanical properties of the bone tissue. Consequently, the aim of this study is to explore the effect of past loads, as estimated from cross-sectional geometric properties, on the formation of DZ osteons compared to type I (common) osteons.

MATERIALS AND METHODS

The sample consists of paired humerus and femur midshaft sections (n = 23) of Eurocanadian settlers from the historical St. Matthew cemetery, Quebec City (1771-1860). Histomorphometric variables included in this study are osteon density for DZ and type I osteons (DZD; OPD), osteon area (DZOn.Ar; On. Ar), Haversian canal area (DZH.Ar; H.Ar), and the area within the hypermineralized ring (HR. Ar). Loading history is estimated from cross-sectional properties including the following variable: cortical and total area (CA, TA), maximum and minimum second moment of area (I_max , I_min ) and polar moment of area (J).

RESULTS

When the humerus and femur of the same individuals are compared, the femur has a higher OPD, DZD, and relative DZD (DZD/OPD). DZ osteons have a smaller area and Haversian canal area compared to type I osteons. The area within the hypermineralized ring in DZ is higher than the Haversian canal area of the type I osteons. Correlations between the residual scores of the regression of histomorphometric variables and cross-sectional properties of the humerus on the femur were not significant.

DISCUSSION

Based on the analysis of the entire cross-section, the lack of correlation between variations in cross-sectional properties and remodeling combined with the significant differences between humeri and femura suggests that the creation of DZ or type I osteons in the bone tissue might be due to a bone specific response, possibly related to differences in bone tissue age that needs to be further investigated. Definitive conclusion regarding biomechanical loads still seem to be premature as regional variations associated with mechanical properties remain to be explored.

Oxytocin effects on osteoblastic differentiation of Bone Marrow Mesenchymal Stem Cells from adult and aging female Wistar rats

Recently, it has been suggested that oxytocin (OT) might play a role in the control of bone remodeling and in bone health of young and adult females. The purpose of this study was to evaluate the effect of osteogenic medium (OM) plus OT (OM + OT; 100 nmol/L) on osteoblastic differentiation of bone marrow mesenchymal stem cells (BMMSCs) from cyclic adult (12 months old) and acyclic aging (24 months old) female Wistar rats. After 14 days, OM + OT increased the oxytocin and oxytocin receptor in the BMMSCs from animals of both age groups relative to OM controls. Alkaline phosphatase activity was higher in the OM + OT than OM group in BMMSCs from 24-month-old female rats. OM + OT improved osteogenic differentiation, observed by anticipated mineralization and increased gene expression of bone morphogenetic protein 2, bone sialoprotein, osteopontin and osteocalcin in both aged relative to OM controls. These findings suggest a role for OT as an adjuvant to induce osteoblastic differentiation of BMMSCs from aged female rat.

Effects of high-impact exercise on the physical properties of bones of ovariectomized rats fed to a high-protein diet

The aim of this study was to evaluate the effects of high-impact physical exercise as a prophylactic and therapeutic means in osteopenic bones of rats submitted to ovariectomy and protein diet intake. A total of 64 Wistar rats were divided into eight groups (n = 8 each), being: OVX, ovx, standard diet and sedentary; OVXE, ovx, standard diet and jump; OVXP, ovx, high-protein diet and sedentary; and OVXEP, ovx, high-protein diet and jump; SH, sham, standard diet and sedentary; SHE, sham, standard diet and jump; SHP, sham, high-protein diet and sedentary; and SHEP, sham, high-protein diet and jump. OVX surgery consists of ovariectomy, and sham was the control surgery. The jumping protocol consisted of 20 jumps/day, 5 days/week. The bone structure was evaluated by densitometry, mechanical tests, histomorphometric, and immunohistochemical analyses. A high-protein diet resulted in increased bone mineral density (P = .049), but decreased maximal load (P = .026) and bone volume fraction (P = .023). The benefits of physical exercise were demonstrated by higher values of the maximal load in the trained groups compared to the sedentary groups (P < .001). The sham groups had decreased immunostaining of osteocalcin (P = .004) and osteopontin (P = .010) compared to ovx groups. However, the high-protein diet (P = .005) and jump exercise (P = .017) resulted in lower immunostaining of osteopontin compared to the standard diet and sedentary groups, respectively. In this experimental model, it was concluded that ovariectomy and a high-fat diet can negatively affect bone tissue and the high-impact exercise was not enough to suppress the deleterious effects caused by the protein diet and ovariectomy.

Cortical Bone Porosity: What Is It, Why Is It Important, and How Can We Detect It?

There is growing recognition of the role of micro-architecture in osteoporotic bone loss and fragility. This trend has been driven by advances in imaging technology, which have enabled a transition from measures of mass to micro-architecture. Imaging trabecular bone has been a key research focus, but advances in resolution have also enabled the detection of cortical bone micro-architecture, particularly the network of vascular canals, commonly referred to as 'cortical porosity.' This review aims to provide an overview of what this level of porosity is, why it is important, and how it can be characterized by imaging. Moving beyond a 'trabeculocentric' view of bone loss holds the potential to improve diagnosis and monitoring of interventions. Furthermore, cortical porosity is intimately linked to the remodeling process, which underpins bone loss, and thus a larger potential exists to improve our fundamental understanding of bone health through imaging of both humans and animal models.

Mechanical and metabolic interactions in cortical bone development

OBJECTIVES

Anthropological studies of cortical bone often aim to reconstruct either habitual activities or health of past populations. During development, mechanical loading and metabolism simultaneously shape cortical bone structure; yet, few studies have investigated how these factors interact. Understanding their relative morphological effects is essential for assessing human behavior from skeletal samples, as previous studies have suggested that interaction effects may influence the interpretation from cortical structure of physical activity or metabolic status.

MATERIAL AND METHODS

This study assesses cross-sectional geometric and histomorphometric features in bones under different loading regimes (femur, humerus, rib) and compares these properties among individuals under different degrees of metabolic stress. The study sample consists of immature humans from a late medieval Lithuanian cemetery (Alytus, 14th-18th centuries AD). Analyses are based on the hypothesis that metabolic bone loss is distributed within the skeleton in a way that optimizes mechanical competency.

RESULTS

Results suggest mechanical compensation for metabolic bone loss in the cross-sectional properties of all three bones (especially ribs), suggesting a mechanism for conserving adequate bone strength for different loads across the skeleton. Microscopic bone loss is restricted to stronger bones under high loads, which may mitigate fracture risk in areas of the skeleton that are more resistive to loading, although alternative explanations are examined.

DISCUSSION

Distributions of metabolic bone loss and subsequent structural adjustments appear to preserve strength. Nevertheless, both mechanics and metabolism have a detectable influence on morphology, and potential implications for behavioral interpretations in bioculturally stressed samples due to this interaction are explored. Am J Phys Anthropol 160:317-333, 2016. © 2016 Wiley Periodicals, Inc.

Three-dimensional reconstruction of Haversian systems in human cortical bone using synchrotron radiation-based micro-CT: morphology and quantification of branching and transverse connections across age

This study uses synchrotron radiation-based micro-computed tomography (CT) scans to reconstruct three-dimensional networks of Haversian systems in human cortical bone in order to observe and analyse interconnectivity of Haversian systems and the development of total Haversian networks across different ages. A better knowledge of how Haversian systems interact with each other is essential to improve understanding of remodeling mechanisms and bone maintenance; however, previous methodological approaches (e.g. serial sections) did not reveal enough detail to follow the specific morphology of Haversian branching, for example. Accordingly, the aim of the present study was to identify the morphological diversity of branching patterns and transverse connections, and to understand how they change with age. Two types of branching morphologies were identified: lateral branching, resulting in small osteon branches bifurcating off of larger Haversian canals; and dichotomous branching, the formation of two new osteonal branches from one. The reconstructions in this study also suggest that Haversian systems frequently target previously existing systems as a path for their course, resulting in a cross-sectional morphology frequently referred to as 'type II osteons'. Transverse connections were diverse in their course from linear to oblique to curvy. Quantitative assessment of age-related trends indicates that while in younger human individuals transverse connections were most common, in older individuals more evidence of connections resulting from Haversian systems growing inside previously existing systems was found. Despite these changes in morphological characteristics, a relatively constant degree of overall interconnectivity is maintained throughout life. Altogether, the present study reveals important details about Haversian systems and their relation to each other that can be used towards a better understanding of cortical bone remodeling as well as a more accurate interpretation of morphological variants of osteons in cross-sectional microscopy. Permitting visibility of reversal lines, synchrotron radiation-based micro-CT is a valuable tool for the reconstruction of Haversian systems, and future analyses have the potential to further improve understanding of various important aspects of bone growth, maintenance and health.

Altered mechanical environment of bone cells in an animal model of short- and long-term osteoporosis

Alterations in bone tissue composition during osteoporosis likely disrupt the mechanical environment of bone cells and may thereby initiate a mechanobiological response. It has proved challenging to characterize the mechanical environment of bone cells in vivo, and the mechanical environment of osteoporotic bone cells is not known. The objective of this research is to characterize the local mechanical environment of osteocytes and osteoblasts from healthy and osteoporotic bone in a rat model of osteoporosis. Using a custom-designed micromechanical loading device, we apply strains representative of a range of physical activity (up to 3000 με) to fluorescently stained femur samples from normal and ovariectomized rats. Confocal imaging was simultaneously performed, and digital image correlation techniques were applied to characterize cellular strains. In healthy bone tissue, osteocytes experience higher maximum strains (31,028 ± 4213 με) than osteoblasts (24,921 ± 3,832 με), whereas a larger proportion of the osteoblast experiences strains >10,000 με. Most interestingly, we show that osteoporotic bone cells experience similar or higher maximum strains than healthy bone cells after short durations of estrogen deficiency (5 weeks), and exceeded the osteogenic strain threshold (10,000 με) in a similar or significantly larger proportion of the cell (osteoblast, 12.68% vs. 13.68%; osteocyte, 15.74% vs. 5.37%). However, in long-term estrogen deficiency (34 weeks), there was no significant difference between bone cells in healthy and osteoporotic bone. These results suggest that the mechanical environment of bone cells is altered during early-stage osteoporosis, and that mechanobiological responses act to restore the mechanical environment of the bone tissue after it has been perturbed by ovariectomy.

Optimization of a Cemented Femoral Prosthesis Considering Bone Remodeling

The study presents a numerical methodology for minimizing the bone loss in human femur submitted to total hip replacement (THR) procedure with focus on cemented femoral stem. Three-dimensional computational models were used to describe the femoral bone behavior. An optimization procedure using the genetic algorithm (GA) method was applied in order to minimize the bone loss, considering the geometry and the material of the prosthesis as well as the design of the stem. Internal and external bone remodeling were analyzed numerically. The numerical method proposed here showed that the bone mass loss could be reduced by 24%, changing the design parameters.

The osteocyte: key player in regulating bone turnover

Osteocytes are the most abundant cell type in bone and are distributed throughout the mineralised bone matrix forming an interconnected network that ideally positions them to sense and to respond to local biomechanical and systemic stimuli to regulate bone remodelling and adaptation. The adaptive process is dependent on the coordinated activity of osteoclasts and osteoblasts that form a so called bone multicellular unit that remodels cortical and trabecular bone through a process of osteoclast-mediated bone resorption, followed by a phase of bone formation mediated by osteoblasts. Osteocytes mediate their effects on bone remodelling via both cell–cell interactions with osteoclasts and osteoblasts, but also via signaling through the release of soluble mediators. The remodelling process provides a mechanism for adapting the skeleton to local biomechanical factors and systemic hormonal influences and for replacing bone that has undergone damage from repetitive mechanical loading.

A mechanostatistical approach to cortical bone remodelling: an equine model

In this study, the development of a mechanostatistical model of three-dimensional cortical bone remodelling informed with in vivo equine data is presented. The equine model was chosen as it is highly translational to the human condition due to similar Haversian systems, availability of in vivo bone strain and biomarker data, and furthermore, equine models are recommended by the US Federal Drugs Administration for comparative joint research. The model was derived from micro-computed tomography imaged specimens taken from the equine third metacarpal bone, and the Frost-based 'mechanostat' was informed from both in vivo strain gauges and biomarkers to estimate bone growth rates. The model also described the well-known 'cutting cone' phenomena where Haversian canals tunnel and replace bone. In order to make this model useful in practice, a partial least squares regression (PLSR) surrogate model was derived based on training data from finite element simulations with different loads. The PLSR model was able to predict microstructure and homogenised Young's modulus with errors less than 2.2% and 0.6%, respectively.

Modalities for Visualization of Cortical Bone Remodeling: The Past, Present, and Future

Bone's ability to respond to load-related phenomena and repair microdamage is achieved through the remodeling process, which renews bone by activating groups of cells known as basic multicellular units (BMUs). The products of BMUs, secondary osteons, have been extensively studied via classic two-dimensional techniques, which have provided a wealth of information on how histomorphology relates to skeletal structure and function. Remodeling is critical in maintaining healthy bone tissue; however, in osteoporotic bone, imbalanced resorption results in increased bone fragility and fracture. With increasing life expectancy, such degenerative bone diseases are a growing concern. The three-dimensional (3D) morphology of BMUs and their correlation to function, however, are not well-characterized and little is known about the specific mechanisms that initiate and regulate their activity within cortical bone. We believe a key limitation has been the lack of 3D information about BMU morphology and activity. Thus, this paper reviews methodologies for 3D investigation of cortical bone remodeling and, specifically, structures associated with BMU activity (resorption spaces) and the structures they create (secondary osteons), spanning from histology to modern ex vivo imaging modalities, culminating with the growing potential of in vivo imaging. This collection of papers focuses on the theme of "putting the 'why' back into bone architecture." Remodeling is one of two mechanisms "how" bone structure is dynamically modified and thus an improved 3D understanding of this fundamental process is crucial to ultimately understanding the "why."

Predicting Bone Remodeling in Response to Total Hip Arthroplasty: Computational Study Using Mechanobiochemical Model

Periprosthetic bone loss following total hip arthroplasty (THA) is a serious concern leading to the premature failure of prosthetic implant. Therefore, investigating bone remodeling in response to hip arthroplasty is of paramount for the purpose of designing long lasting prostheses. In this study, a thermodynamic-based theory, which considers the coupling between the mechanical loading and biochemical affinity as stimulus for bone formation and resorption, was used to simulate the femoral density change in response to THA. The results of the numerical simulations using 3D finite element analysis revealed that in Gruen zone 7, after remarkable postoperative bone loss, the bone density started recovering and got stabilized after 9% increase. The most significant periprosthetic bone loss was found in Gruen zone 7 (−17.93%) followed by zone 1 (−13.77%). Conversely, in zone 4, bone densification was observed (+4.63%). The results have also shown that the bone density loss in the posterior region of the proximal metaphysis was greater than that in the anterior side. This study provided a quantitative figure for monitoring the distribution variation of density throughout the femoral bone. The predicted bone density distribution before and after THA agree well with the bone morphology and previous results from the literature.

Production and repair of implant-induced microdamage in the cortical bone of goats after long-term estrogen deficiency

SUMMARY

By using an ovariectomized goat model, we found that estrogen depletion decreases bone quality and makes it susceptible to screw-induced mechanical microdamage. Both diffuse microdamage and linear cracks accumulated up to 3 weeks after screw implantation, and the microdamage was repaired gradually after 4-8 months.

INTRODUCTION

The aim of this study was to observe the effect of long-term estrogen deficiency on the creation and repair of microdamage in cortical bone adjacent to bone screw.

METHODS

Cortical bone screws were placed in the tibial diaphyses 28 months after ovariectomy (OVX) or sham operation (Sham-Op) in female goats. The goats were euthanized at 0 day, 21 days, 4 months, and 8 months after screw implantation. Microdamage morphology and repair were examined in peri-screw bone using histomorphometric method, and the nanomechanical properties of peri-screw bone were examined with nanoindentation testing.

RESULTS

Tibiae from ovariectomized goats in which screws had been placed had significantly higher levels of diffuse microdamage and significantly more linear cracks than those from sham goats, and the diffuse microdamage was more obvious than linear cracks in the region adjacent to the implant. Both diffuse microdamage and linear cracks accumulated up to day 21 and then gradually repaired at 4 and 8 months after surgery. The trend for bone remodeling in each group was consistent with changes in the level of microdamage. Nanoindentation testing showed that both elastic modulus and hardness in peri-screw bone were significantly decreased in OVX group compared to Sham-Op group. The hardness and elastic modulus also showed a downward trend up to 4 months after screw implantation and then exhibited some recovery after 8 months.

CONCLUSIONS

Estrogen depletion decreases bone quality and makes it vulnerable to screw-induced mechanical damage, which may compromise the initial stability of an orthopedic implant.

Repair of microdamage in osteonal cortical bone adjacent to bone screw

Up to date, little is known about the repair mode of microdamage in osteonal cortical bone resulting from bone screw implantation. In this study, self-tapping titanium cortical bone screws were inserted into the tibial diaphyses of 24 adult male rabbits. The animals were sacrificed at 1 day, 2 weeks, 1 month and 2 months after surgery. Histomorphometric measurement and confocal microscopy were performed on basic fuchsin stained bone sections to examine the morphological characteristics of microdamage, bone resorption activity and spatial relationship between microdamage and bone resorption. Diffuse and linear cracks were coexisted in peri-screw bone. Intracortical bone resorption was significantly increased 2 weeks after screw installation and reach to the maximum at 1 month. There was no significant difference in bone resorption between 1-month and 2-months groups. Microdamage was significantly decreased within 1 month after surgery. Bone resorption was predisposed to occur in the region of <100 µm from the bone-screw interface, where had extensive diffuse damage mixed with linear cracks. Different patterns of resorption cavities appeared in peri-screw bone. These data suggest that 1) the complex microdamage composed of diffuse damage and linear cracks is a strong stimulator for initiating targeted bone remodeling; 2) bone resorption activities taking place on the surfaces of differently oriented Haversian and Volkmann canals work in a team for the repair of extensive microdamage; 3) targeted bone remodeling is a short-term reaction to microdamage and thereby it may not be able to remove all microdamage resulting from bone screw insertion.

Alterations in periarticular bone and cross talk between subchondral bone and articular cartilage in osteoarthritis

The articular cartilage and the subchondral bone form a biocomposite that is uniquely adapted to the transfer of loads across the diarthrodial joint. During the evolution of the osteoarthritic process biomechanical and biological processes result in alterations in the composition, structure and functional properties of these tissues. Given the intimate contact between the cartilage and bone, alterations of either tissue will modulate the properties and function of the other joint component. The changes in periarticular bone tend to occur very early in the development of OA. Although chondrocytes also have the capacity to modulate their functional state in response to loading, the capacity of these cells to repair and modify their surrounding extracellular matrix is relatively limited in comparison to the adjacent subchondral bone. This differential adaptive capacity likely underlies the more rapid appearance of detectable skeletal changes in OA in comparison to the articular cartilage. The OA changes in periarticular bone include increases in subchondral cortical bone thickness, gradual decreases in subchondral trabeular bone mass, formation of marginal joint osteophytes, development of bone cysts and advancement of the zone of calcified cartilage between the articular cartilage and subchondral bone. The expansion of the zone of calcified cartilage contributes to overall thinning of the articular cartilage. The mechanisms involved in this process include the release of soluble mediators from chondrocytes in the deep zones of the articular cartilage and/or the influences of microcracks that have initiated focal remodeling in the calcified cartilage and subchondral bone in an attempt to repair the microdamage. There is the need for further studies to define the pathophysiological mechanisms involved in the interaction between subchondral bone and articular cartilage and for applying this information to the development of therapeutic interventions to improve the outcomes in patients with OA.

Bone balance within a cortical BMU: local controls of bone resorption and formation

Maintaining bone volume during bone turnover by a BMU is known as bone balance. Balance is required to maintain structural integrity of the bone and is often dysregulated in disease. Consequently, understanding how a BMU controls bone balance is of considerable interest. This paper develops a methodology for identifying potential balance controls within a single cortical BMU. The theoretical framework developed offers the possibility of a directed search for biological processes compatible with the constraints of balance control. We first derive general control constraint equations and then introduce constitutive equations to identify potential control processes that link key variables that describe the state of the BMU. The paper describes specific local bone volume balance controls that may be associated with bone resorption and bone formation. Because bone resorption and formation both involve averaging over time, short-term fluctuations in the environment are removed, leaving the control systems to manage deviations in longer-term trends back towards their desired values. The length of time for averaging is much greater for bone formation than for bone resorption, which enables more filtering of variability in the bone formation environment. Remarkably, the duration for averaging of bone formation may also grow to control deviations in long-term trends of bone formation. Providing there is sufficient bone formation capacity by osteoblasts, this leads to an extraordinarily robust control mechanism that is independent of either osteoblast number or the cellular osteoid formation rate. A complex picture begins to emerge for the control of bone volume. Different control relationships may achieve the same objective, and the ‘integration of information’ occurring within a BMU may be interpreted as different sets of BMU control systems coming to the fore as different information is supplied to the BMU, which in turn leads to different observable BMU behaviors.

Numerical test concerning bone mass apposition under electrical and mechanical stimulus

This article proposes a model of bone remodeling that encompasses mechanical and electrical stimuli. The remodeling formulation proposed by Weinans and collaborators was used as the basis of this research, with a literature review allowing a constitutive model evaluating the permittivity of bone tissue to be developed. This allowed the mass distribution that depends on mechanical and electrical stimuli to be obtained. The remaining constants were established through numerical experimentation. The results demonstrate that mass distribution is altered under electrical stimulation, generally resulting in a greater deposition of mass. In addition, the frequency of application of an electric field can affect the distribution of mass; at a lower frequency there is more mass in the domain. These numerical experiments open up discussion concerning the importance of the electric field in the remodeling process and propose the quantification of their effects.

Microcracks and osteoclast resorption activity in vitro

During bone remodeling osteoclasts resorb bone, thus removing material, e.g., damaged by microcracks, which arises as a result of physiological loading and could reduce bone strength. Such a process needs targeted bone resorption exactly at damaged sites. Osteocytic signaling plays a key role in this process, but it is not excluded that osteoclasts per se may possess toposensitivity to recognize and resorb damaged bone since it has been shown that resorption spaces are associated with microcracks. To address this question, we used an in vitro setup of a pure osteoclast culture and mineralized substrates with artificially introduced microcracks and microscratches. Histomorphometric analyses and statistical evaluation clearly showed that these defects had no effect on osteoclast resorption behavior. Osteoclasts did not resorb along microcracks, even when resorption started right beside these damages. Furthermore, quantification of resorption on three different mineralized substrates, cortical bone, bleached bone (bone after partial removal of the organic matrix), and dentin, revealed lowest resorption on bone, significantly higher resorption on bleached bone, and highest resorption on dentin. The difference between native and bleached bone may be interpreted as an inhibitory impact of the organic matrix. However, the collagen-based matrix could not be the responsible part as resorption was highest on dentin, which contains collagen. It seems that osteocytic proteins, stored in bone but not present in dentin, affect osteoclastic action. This demonstrates that osteoclasts per se do not possess a toposensitivity to remove microcracks but may be influenced by components of the organic bone matrix.

Simulated evolution of the vertebral body based on basic multicellular unit activities

A numerical model based on the theory of bone remodeling is proposed to predict the evolution of trabecular bone architecture within the vertebral body and to investigate the process of degeneration in vertebral bone. In this study, particular attention is paid on the description of microstructure changes during the aging process. To take into account the effect of basic multicellular units (BMUs), a set of computational algorithms has been developed. It is assumed that BMU activation probability depends on the state of damaged bone tissue (damage accumulation, ω), which is evaluated according to previous research concerning bone fatigue damage. Combining these algorithms with the finite-element method (FEM), the microstructure of vertebral bone has been predicted for up to 8 simulated years. Moreover, biomechanical material properties have been monitored to investigate the changes of vertebral bone with age. This study shows that the simulation based on BMU activities has the potential to define and predict the morphological evolution of the vertebral body. It can be concluded that the novel algorithms incorporating the coupled effects of both adaptive remodeling and microdamage remodeling could be utilized to gain greater insight into the mechanism of bone loss in the elderly population.

Visualization of 3D osteon morphology by synchrotron radiation micro-CT

Cortical bone histology has been the subject of scientific inquiry since the advent of the earliest microscopes. Histology - literally the study of tissue - is a field nearly synonymous with 2D thin sections. That said, progressive developments in high-resolution X-ray imaging are enabling 3D visualization to reach ever smaller structures. Micro-computed tomography (micro-CT), employing conventional X-ray sources, has become the gold standard for 3D analysis of trabecular bone and is capable of detecting the structure of vascular (osteonal) porosity in cortical bone. To date, however, direct 3D visualization of secondary osteons has eluded micro-CT based upon absorption-derived contrast. Synchrotron radiation micro-CT, through greater image quality, resolution and alternative contrast mechanisms (e.g. phase contrast), holds great potential for non-destructive 3D visualization of secondary osteons. Our objective was to demonstrate this potential and to discuss areas of bone research that can be advanced through the application of this approach. We imaged human mid-femoral cortical bone specimens derived from a 20-year-old male (Melbourne Femur Collection) at the Advanced Photon Source synchrotron (Chicago, IL, USA) using the 2BM beam line. A 60-mm distance between the target and the detector was employed to enhance visualization of internal structures through propagation phase contrast. Scan times were 1 h and images were acquired with 1.4-μm nominal isotropic resolution. Computer-aided manual segmentation and volumetric 3D rendering were employed to visualize secondary osteons and porous structures, respectively. Osteonal borders were evident via two contrast mechanisms. First, relatively new (hypomineralized) osteons were evident due to differences in X-ray attenuation relative to the surrounding bone. Second, osteon boundaries (cement lines) were delineated by phase contrast. Phase contrast also enabled the detection of soft tissue remnants within the vascular pores. The ability to discern osteon boundaries in conjunction with vascular and cellular porosity revealed a number of secondary osteon morphologies and provided a unique 3D perspective of the superimposition of secondary osteons on existing structures. Improvements in resolution and optimization of the propagation phase contrast promise to provide further improvements in structural detail in the future.

Urinary levels of cross-linked N-terminal telopeptide of type I collagen and nutritional status in Japanese professional baseball players

The objective of the present study was to investigate the nutritional status from the aspect of bone metabolism in Japanese elite male athletes with increased bone resorption. Urinary levels of a bone resorption marker, cross-linked N-terminal telopeptide of type 1 collagen (NTX), were measured in 71 professional baseball players (age, 18-39 years); the mean urinary NTX level was 65.6 (range, 17.5-269.0) nM BCE/mM Cr. Of 71 athletes, 9 with high levels of urinary NTX (greater than mean + 1 SD) were examined by measuring serum biochemical markers and nutritional assessment (simple food frequency questionnaire). Serum biochemical marker analysis showed that 7 of these 9 athletes had vitamin D insufficiency, as indicated by low serum levels of 25-hydroxyvitamin D, and that all 9 athletes showed vitamin K insufficiency as indicated by low levels of vitamins K(1) and K(2). Nutritional assessment revealed high intakes of protein and low intakes of calcium and vitamin D based on adequate intake (AI). However, daily vitamin K intake achieved the AI. These results suggest that there exist elite male athletes who show increased bone resorption and calcium and vitamin D insufficiency. However, there was a discrepancy between vitamin K intake and serum levels of vitamins K(1) and K(2). The present study raised an issue regarding the nutritional status from the point of view of bone metabolism in elite male athletes such as professional baseball players.

Articular cartilage and subchondral bone in the pathogenesis of osteoarthritis

The articular surface plays an essential role in load transfer across the joint, and conditions that produce increased load transfer or altered patterns of load distribution accelerate the development of osteoarthritis (OA). Current knowledge segregates the risk factors into two fundamental mechanisms related to the adverse effects of "abnormal" loading on normal cartilage or "normal" loading on abnormal cartilage. Although chondrocytes can modulate their functional state in response to loading, their capacity to repair and modify the surrounding extracellular matrix is limited in comparison to skeletal cells in bone. This differential adaptive capacity underlies the more rapid appearance of detectable skeletal changes, especially after acute injuries that alter joint mechanics. The imbalance in the adaptation of the cartilage and bone disrupts the physiological relationship between these tissues and further contributes to OA pathology. This review focuses on the specific articular cartilage and skeletal features of OA and the putative mechanisms involved in their pathogenesis.

Bone remodeling in a new biomimetic polymer-composite hip stem

Adaptive bone remodeling is an important factor that leads to bone resorption in the surrounding femoral bone and implant loosening. Taking into account this factor in the design of hip implants is of clinical importance, because it allows the prediction of the bone-density redistribution and enables the monitoring of bone adaptation after prosthetic implantation. In this article, adaptive bone remodeling around a new biomimetic polymer-composite-based (CF/PA12) hip prosthesis is investigated to evaluate the amount of stress shielding and bone resorption. The design concept of this new prosthesis is based on a hollow substructure made of hydroxyapatite-coated, continuous carbon fiber (CF)-reinforced polyamide 12 (PA12) composite with an internal soft polymer-based core. Strain energy density theory coupled with 3D Finite Element models is used to predict bone density redistributions in the femoral bone before and after total hip replacement (THR) using both polymer-composite and titanium (Ti) stems. The result of numerical simulations of bone remodeling revealed that the CF/PA12 composite stem generates a better bone density pattern compared with the Ti-based stem, indicating the effectiveness of the composite stem to reduce bone resorption caused by stress-shielding phenomenon. This may result in an extended lifetime of THR.

Estrogen regulation of apoptosis in osteoblasts

Dysregulated apoptosis is a critical failure associated with prominent degenerative diseases including osteoporosis. In bone, estrogen deficiency has been associated with accelerated osteoblast apoptosis and susceptibility to osteoporotic fractures. Hormone therapy continues to be an effective option for preventing osteoporosis and bone fractures. Induction of apoptosis in G-292 human osteoblastic cells by exposure to etoposide or the inflammatory cytokine TNF-alpha promoted acute caspase-3/7 activity and this increased activity was inhibited by pretreatment with estradiol. Etoposide also increased the expression of a battery of apoptosis-promoting genes and this expression was also inhibited by estradiol. Among the apoptotic genes whose expression was inhibited by estradiol was ITPR1, which encodes the type 1 InsP3R. InsP3Rs are intracellular calcium channels and key proapoptotic mediators. Estradiol via estrogen receptor beta1 suppresses ITPR1 gene transcription in G-292 cells. These analyses suggest that an underlying basis of the beneficial activity of estrogens in combating osteoporosis may involve the prevention of apoptosis in osteoblasts and that a key event in this process is the repression of apoptotic gene expression and inhibition of caspase-3/7.

Role of bone in osteoarthritis pathogenesis

Much of the attention in developing diagnostic tools and therapeutic interventions for the management of osteoarthritis (OA) has focused on the preservation or repair of articular cartilage. It is clear that all of the joint components, including the ligaments, tendons, capsule, synovial lining, and periarticular bone, undergo structural and functional alterations during the course of OA progression. This article focuses on the specific skeletal features of OA and the putative mechanisms involved in their pathogenesis.

Regional variability in secondary remodeling within long bone cortices of catarrhine primates: the influence of bone growth history

Secondary intracortical remodeling of bone varies considerably among and within vertebrate skeletons. Although prior research has shed important light on its biomechanical significance, factors accounting for this variability remain poorly understood. We examined regional patterning of secondary osteonal bone in an ontogenetic series of wild-collected primates, at the midshaft femur and humerus of Chlorocebus (Cercopithecus) aethiops (n = 32) and Hylobates lar (n = 28), and the midshaft femur of Pan troglodytes (n = 12). Our major objectives were: 1) to determine whether secondary osteonal bone exhibits significant regional patterning across inner, mid-cortical and outer circumferential cortical rings within cross-sections; and if so, 2) to consider the manner in which this regional patterning may reflect the influence of relative tissue age and other circumstances of bone growth. Using same field-of-view images of 100-microm-thick cross-sections acquired in brightfield and circularly polarized light microscopy, we quantified the percent area of secondary osteonal bone (%HAV) for whole cross-sections and across the three circumferential rings within cross-sections. We expected bone areas with inner and middle rings to exhibit higher %HAV than the outer cortical ring within cross-sections, the latter comprising tissues of more recent depositional history. Observations of primary bone microstructural development provided an additional context in which to evaluate regional patterning of intracortical remodeling. Results demonstrated significant regional variability in %HAV within all skeletal sites. As predicted,%HAV was usually lowest in the outer cortical ring within cross-sections. However, regional patterning across inner vs. mid-cortical rings showed a more variable pattern across taxa, age classes, and skeletal sites examined. Observations of primary bone microstructure revealed that the distribution of endosteally deposited bone had an important influence on the patterning of secondary osteonal bone across rings. Further, when present, endosteal compacted coarse cancellous bone always exhibited some evidence of intracortical remodeling, even in those skeletal sites exhibiting comparatively low %HAV overall. These results suggest that future studies should consider the local developmental origin of bone regions undergoing secondary remodeling later in life, for an improved understanding of the manner in which developmental and mechanical factors may interact to produce the taxonomic and intraskeletal patterning of secondary bone remodelling in adults.