Highly effective antibacterial textiles containing green synthesized silver nanoparticles

Construction of durable antibacterial cellulose textiles through grafting dynamic disulfide-containing amino-compound and nanosilver deposition

Cotton textile is very comfortable to wear, and also provides an ideal environment for bacterial propagation, easily causing harm to human health. In order to address this issue, various antibacterial techniques are employed for cotton finishing. However, some processes are complex and involve the use of environmentally unfriendly chemicals. In this work, a durable and efficient antibacterial cotton fabric was prepared via grafting of an amino-compound containing dynamic disulfide bonds, and then in-situ deposition of silver nanoparticles (AgNPs). Briefly, the reactive α-lipoic acid-modified polyethyleneimine (mPEI) was introduced to the cotton fibers via thiol-ene click reaction. Subsequently, the amino groups and dynamically-generated sulfhydryl groups in the mPEI molecules were used to initiate the ultrafast reduction of silver ions without the participation of additional reductant, constructing a stable antibacterial layer on fiber surface. The results reveal that the amino and thiol groups of mPEI could form coordination bonds with the deposited silver nanoparticles, and the antibacterial ability of AgNP@cotton-g-mPEI fabric remains at a high level even after 20 washing cycles. After 30 min of contact with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), the antibacterial rates against both bacteria reached 99.99 %. Meanwhile, the network matrix constructed by the recombination of the dynamic disulfide bonds in mPEI endows the cotton fabric with detectable wrinkle resistance and encouraging anti-ultraviolet effect. The present work provides a novel alternative for preparation of durable and efficient antibacterial textiles.

Toward Scaling up the Production of Metal Oxide Nanoparticles for Application on Washable Antimicrobial Cotton Fabrics

To examine the utilization of metal oxide nanoparticles (NPs) in different commercial products, this work focuses on the determination of cost-effective and scalable synthesis protocols. The solvothermal protocol is well-known as a scalable method but has recently been shown to lack economic feasibility. The mechanochemical method has recently been recognized to be a more economic and environmentally friendly substitute for the solvothermal method. In this study, zinc oxide nanoparticles (ZnO NPs) and copper oxide nanoparticles (CuO NPs) were synthesized using two (aqueous and organic) solvothermal (wet) methods and two (manual and automated) mechanochemical (dry) methods. The four methods were evaluated and compared. The automated mechanochemical method generated a significantly higher yield of ZnO NPs (82%) and CuO NPs (84%) using the least energy and time. However, the prepared ZnO NPs displayed higher cytotoxicity against Vero E6 cells when compared to that of CuO NPs. Because of their low cytotoxicity, CuO NPs synthesized via the automated mechanochemical method were selected for application onto cotton fabrics. Lower cytotoxicity was observed for CuO NPs treated fabrics with an IC₅₀ of 562 mg/mL and ZnO treated fabrics with an IC₅₀ at 23.93 mg/mL when the treated fabrics were tested against L929 fibroblast cells. Additionally, the cotton fabrics retained bactericidal and virucidal effects after four washes. Thus, the current study recommends the automated mechanochemical method as a cost-effective scalable approach for the synthesis of CuO NPs. The application of CuO NPs onto cotton fabrics generated washable antimicrobial face masks.

Quantification of Spent Coffee Ground Extracts by Roast and Brew Method, and Their Utility in a Green Synthesis of Gold and Silver Nanoparticles

Nanotechnology has become increasingly important in modern society, and nanoparticles are routinely used in many areas of technology, industry, and commercial products. Many species of nanoparticle (NP) are typically synthesized using toxic or hazardous chemicals, making these methods less environmentally friendly. Consequently, there has been growing interest in green synthesis methods, which avoid unnecessary exposure to toxic chemicals and reduce harmful waste. Synthesis methods which utilize food waste products are particularly attractive because they add value and a secondary use for material which would otherwise be disposed of. Here, we show that spent coffee grounds (SCGs) that have already been used once in coffee brewing can be easily used to synthesize gold and silver NPs. SCGs derived from medium and dark roasts of the same bean source were acquired after brewing coffee by hot brew, cold brew, and espresso techniques. The total antioxidant activity (TAC) and total caffeoylquinic acid (CQA) of the aqueous SCG extracts were investigated, showing that hot brew SCGs had the highest CQA and TAC levels, while espresso SCGs had the lowest. SCG extract proved effective as a reducing agent in synthesizing gold and silver NPs regardless of roast or initial brew method.

Development of Wash-Durable Antimicrobial Cotton Fabrics by In Situ Green Synthesis of Silver Nanoparticles and Investigation of Their Antimicrobial Efficacy against Drug-Resistant Bacteria

An environment friendly and wash-durable silver nanoparticle treatment of cotton fabrics was carried out by in situ reduction of silver nitrate using Azadirachta indica leaf extract. The wash durability of the silver nanoparticles treatment on the cotton fabric was improved by pretreating the fabrics by mercerization and by adopting hydrothermal conditions of 120 °C temperature and 15 psi pressure for the in situ synthesis. The silver nanoparticle treated fabrics were characterized using scanning electron microscopy, colorimetric analysis and inductively coupled plasma mass spectroscopy. The coating of silver nanoparticles was seen to be dense and uniform in the scanning electron micrographs of the treated fabrics. An evaluation of the antibacterial efficacy of the silver nanoparticle treated fabric against antibiotic-resistant Gram-positive and Gram-negative strains was carried out. The antibacterial efficacy was found to be the highest against Bacillus licheniformis, showing 93.3% inhibition, whereas it was moderate against Klebsiella pneumoniae (20%) and Escherichia coli (10%). The transmittance data of a UV spectrophotometer (290–400nm) was used for measuring the UV protection factor of the silver nanoparticle treated fabrics. All the silver nanoparticle treated fabrics showed good antimicrobial and UV protection activity. The treatment was also seen to be durable against repeated laundering. This paper contributes the first report on a novel green synthesis approach integrating mercerization of cotton fabrics and in situ synthesis of nanoparticles under hydrothermal conditions using Azadirachta indica leaf extract for improved wash durability of the multifunctional fabric.

Physical and Mechanical Characterization of a Functionalized Cotton Fabric with Nanocomposite Based on Silver Nanoparticles and Carboxymethyl Chitosan Using Green Chemistry

Cotton is the most widely used natural fiber for textiles but its innate capacity to absorb moisture, retain oxygen, and high specific surface area make it more prone to microbial contamination, becoming an appropriate medium for the growth of bacteria and fungi. In recent years, the incorporation of silver nanoparticles in textile products has been widely used due to their broad-spectrum antibacterial activity and low toxicity towards mammalian cells. The aim of the current study is to synthesize and characterize a nanocomposite based on silver nanoparticles and carboxymethyl chitosan (AgNPs-CMC), which was utilized to provide a functional finish to cotton fabric. The scanning electron microscope (SEM) to produce a scanning transmission electron microscope (STEM) image showed that the nanocomposite presents AgNPs with a 5–20 nm size. The X-ray diffraction (XRD) analysis confirmed the presence of silver nanoparticles. The concentration of silver in the functionalized fabric was evaluated by inductively coupled plasma optical emission spectrometry (ICP-OES), which reported an average concentration of 13.5 mg of silver per kg of functionalized fabric. SEM showed that silver nanoparticles present a uniform distribution on the surface of the functionalized cotton fabric fibers. On the other hand, by infrared spectroscopy, it was observed that the functionalized fabric variation (compared to control) had a displaced peak of intensity at 1594.32 cm−1, corresponding to carboxylate anions. Similarly, Raman spectroscopy showed an intense peak at 1592.84 cm−1, which corresponds to the primary amino group of carboxymethyl chitosan, and a peak at 1371.5 cm−1 corresponding to the carboxylic anions. Finally, the physical and mechanical tests of tensile strength and color index of the functional fabric reported that it was no different (p ˃ 0.05) than the control fabric. Our results demonstrate that we have obtained an improved functionalized cotton fabric using green chemistry that does not alter intrinsic properties of the fabric and has the potential to be utilized in the manufacturing of hospital garments.

Antibacterial and Antifungal Activity of Functionalized Cotton Fabric with Nanocomposite Based on Silver Nanoparticles and Carboxymethyl Chitosan

Cotton is the most widely used natural fiber for textiles; however, the capacity of cotton fibers to absorb large amounts of moisture, retain oxygen, and have a high specific surface area makes them more prone to microbial contamination, becoming an appropriate medium for the growth of bacteria and fungi. In recent years, the incorporation of silver nanoparticles in textile products has been widely used due to their broad-spectrum antibacterial activity and low toxicity towards mammalian cells. The aim of the current study is to continue the assessment of our developed nanocomposite and evaluate the antibacterial and antifungal activity of the nanocomposite based on silver nanoparticles and carboxymethyl chitosan (AgNPs-CMC) against Escherichia coli, Staphylococcus aureus, and Candida albicans, evaluated by the well diffusion method. The antibacterial activity against E. coli and S. aureus was also evaluated by the qualitative method of inhibition zone and the quantitative method of colony counting. Likewise, the antifungal activity of the functionalized fabric against Candida albicans and Aspergillus niger was determined by the inhibition zone method and the antifungal activity method GBT 24346-2009, respectively. The functionalized fabric showed 100% antibacterial activity against E. coli and S. aureus and good antifungal activity against C. albicans and A. niger. Our results indicate that the functionalized fabric could be used in garments for hospital use to reduce nosocomial infections.

Waterproof and Moisture-Permeable Polyurethane Nanofiber Membrane with High Strength, Launderability, and Durable Antimicrobial Properties

Nanofiber membrane has high biological protection function because of its good waterproof and moisture permeability properties. However, this membrane usually lacks active antimicrobial properties, limiting the application in reusable bioprotective textiles. Herein, waterborne polyurethane-capped Ag nanoparticles (AgNPs) were synthesized by reducing silver nitrate in water by sodium borohydride in the presence of polyurethane. AgNP-embedded thermoplastic urethane (TPU) nanofiber membrane was prepared by electrospinning a mixed solution of AgNPs and TPU. As-prepared membranes with Ag content of 50-300 mg·kg^-1 have an average diameter of 0.75, 0.64, and 0.63 μm and good fiber uniformity. The doping of AgNP-embedded nanomembrane showed increased breaking force probably because of the induced crystallization effect. Test results showed that as-prepared TPU nanofiber membrane with silver content as low as 100 mg·kg^-1 showed good washing resistance. The antibacterial rates of E. coli and S. aureus remained 99.99% with 50 times of soaping or chlorine washing. The corresponding waterproof and moisture permeability properties of nanofiber membrane with a thickness of 0.1 mm remained nearly unchanged, i.e., moisture permeability of around 2600 g·m^-2 per 24 h and the hydrostatic pressure resistance of around 400 Pa after 50 times of soaping or chlorine washing.

Breathability performance of antiviral cloth masks treated with silver nanoparticles for protection against COVID-19

The global widespread of coronavirus disease 2019 (COVID-19) has caused shortage of medical face masks and led to developing of various types of cloth masks with different levels of protection and comfort to meet the market demands. Breathing comfort is a significant aspect that should be considered during the design of cloth masks along with the filtration efficiency; otherwise, the wearer will feel suffocated. In this work, different types of cotton and polyester knitted fabrics blended with spandex yarns were produced and treated with silver nanoparticles to be used as antiviral cloth masks. Scanning electron microscope, transmission electron microscope, and EDX were used to characterize the silver nanoparticles (AgNPs). Antiviral activity was assessed against SARS-CoV-2 coronavirus as well. The influence of using different fabric materials, number of layers, and hybrid layers on their air permeability and breathability were investigated to evaluate the comfortability of the cloth masks. Physiological impacts of wearing the cloth masks were evaluated by measuring oxygen saturation of hemoglobin and heart rate of the wearers while doing various activities. The results indicated that AgNPs have low cytotoxicity and considerable efficiency in inhibition of SARS-CoV-2. Adding spandex yarns with different count and ratios reduced the porosity and air permeability of the fabrics. Moreover, the combination of three hybrid layers' mask made of polyester fabric in the outer layer with 100% cotton fabric in the inner layer showed high comfortability associated with high air permeability and breathability. Also, wearing these masks while doing activities showed no significant effect on blood oxygen saturation and heart rate of the wearers.

Functionalization of cotton fabrics with titanium oxide doped silver nanoparticles: Antimicrobial and UV protection activities

The target of our current work was designed to prepare titanium oxide doped silver nanoparticles (Ag/TiO₂ NPs) and their impact on the functionalization of cotton fabrics. Additionally, the effect of Ag/TiO₂ NPs was compared with the individually prepared silver nanoparticles (AgNPs) and titanium oxide nanoparticles (TiO₂ NPs). In this work, AgNPs was prepared in its solid state using Arabic gum as efficient stabilizing and reducing agent. Then, two concentrations of the as-synthesized nanoparticles were used for functionalize the cotton fabrics by pad-dry-cure treatment in the presence of fixing agent to increase the durability of treated cotton fabrics against vigorous washing cycles. The finding implied that the prepared nanoparticles were successfully synthesized in nano-size with spherical shape and homogeneity. The efficacy of the functionalized cotton fabrics with those nanoparticles were evaluated in terms of multifunctional properties including antimicrobial and UV Protection Factor (UPF) and the mechanical features before and after many washing cycles; 10, 15 and 20 times. The resultant also proved that Ag/TiO₂ NPs-treated cotton fabrics exhibited the greater values of both antimicrobial and UPF properties with enhancement in the tensile strength and elongation features. Thus, the combination between these two nanoparticles through doping reaction is suitable for imparting superior antimicrobial properties against the four tested microbial species (S. aureus, E. coli, C. albicans, and A. niger) and good UPF properties.

Titanium dioxide particles frequently present in face masks intended for general use require regulatory control

Although titanium dioxide (TiO₂) is a suspected human carcinogen when inhaled, fiber-grade TiO₂ (nano)particles were demonstrated in synthetic textile fibers of face masks intended for the general public. STEM-EDX analysis on sections of a variety of single use and reusable face masks visualized agglomerated near-spherical TiO₂ particles in non-woven fabrics, polyester, polyamide and bi-component fibers. Median sizes of constituent particles ranged from 89 to 184 nm, implying an important fraction of nano-sized particles (< 100 nm). The total TiO₂ mass determined by ICP-OES ranged from 791 to 152,345 µg per mask. The estimated TiO₂ mass at the fiber surface ranged from 17 to 4394 µg, and systematically exceeded the acceptable exposure level to TiO₂ by inhalation (3.6 µg), determined based on a scenario where face masks are worn intensively. No assumptions were made about the likelihood of the release of TiO₂ particles itself, since direct measurement of release and inhalation uptake when face masks are worn could not be assessed. The importance of wearing face masks against COVID-19 is unquestionable. Even so, these results urge for in depth research of (nano)technology applications in textiles to avoid possible future consequences caused by a poorly regulated use and to implement regulatory standards phasing out or limiting the amount of TiO₂ particles, following the safe-by-design principle.

Fabrication of Nanofibers Based on Hydroxypropyl Starch/Polyurethane Loaded with the Biosynthesized Silver Nanoparticles for the Treatment of Pathogenic Microbes in Wounds

Fabrication of electrospun nanofibers based on the blending of modified natural polymer, hydroxyl propyl starch (HPS) as one of the most renewable resources, with synthetic polymers, such as polyurethane (PU) is of great potential for biomedical applications. The as-prepared nanofibers were used as antimicrobial sheets via blending with biosynthesized silver nanoparticles (AgNPs), which were prepared in a safe way with low cost using the extract of Nerium oleander leaves, which acted as a reducing and stabilizing agent as well. The biosynthesized AgNPs were fully characterized by various techniques (UV-vis, TEM, DLS, zeta potential and XRD). The obtained results from UV-vis depicted that the AgNPs appeared at a wavelength equal to 404 nm affirming the preparation of AgNPs when compared with the wavelength of extract (there are no observable peaks). The average particle size of the fabricated AgNPs that mediated with HPS exhibited a very small size (less than 5 nm) with excellent stability (more than -30 mv). In addition, the fabricated nanofibers were also fully characterized and the obtained data proved that the diameter of nanofibers was enlarged with increasing the concentration of AgNPs. Additionally, the findings illustrated that the pore sizes of electrospun sheets were in the range of 75 to 350 nm. The obtained results proved that the presence of HPS displayed a vital role in decreasing the contact angle of PU nanofibers and thus, increased the hydrophilicity of the net nanofibers. It is worthy to mention that the prepared nanofibers incorporated with AgNPs exhibited incredible antimicrobial activity against pathogenic microbes that actually presented in human wounds. Moreover, P. aeruginosa was the most sensitive species to the fabricated nanofibers compared to other tested ones. The minimal inhibitory concentrations (MICs) values of AgNPs-3@NFs against P. aeruginosa, and E. faecalis, were 250 and 500 mg/L within 15 min, respectively.

Facile synthesis and characterization of chitosan/zinc oxide nanocomposite for enhanced antibacterial and photocatalytic activity

In this report, chitosan/zinc oxide (CS/ZnO) nanocomposite was synthesized using Sida acuta and assessed their antibacterial and photocatalytic properties. The formation of CS/ZnO nanocomposite was preliminary confirmed by colour change and UV-visible spectroscopy. The crystalline peaks related to CS and ZnO in CS/ZnO nanocomposite were demonstrated by XRD. Morphological analysis through FE-SEM and TEM showed a rod like appearance for ZnO NPs and agglomerated grains with rod shaped morphology was observed for the CS/ZnO nanocomposite. The peaks around 400-800 cm^-1 in the IR spectrum of nanocomposite indicated the vibrations of metal-oxygen (ZnO), whereas bands at 1659 cm^-1 and 1546 cm^-1 indicated the presence of amine groups, which confirms the CS in the synthesized CS/ZnO nanocomposite. The CS/ZnO nanocomposite exhibited remarkable growth inhibition activity against B. subtilis and E. coli with 22 ± 0.3 and 16.5 ± 0.5 mm zone of inhibitions. In addition, CS/ZnO nanocomposite treated cotton fabrics also exhibited antibacterial activity against B. subtilis and E. coli. Furthermore, the ZnO NPs and nanocomposite showed time depended photodegradation activity and revealed 76% and 91% decomposition of CR under sunlight irradiation. In conclusion, our study revealed that the functionalization of biopolymer CS to the inorganic ZnO enhances the bio and catalytic properties.

In Situ Functionalization of Cellulose with Zinc Pyrithione for Antimicrobial Applications

Considering the public health demands for stronger and effective personal protective clothing, herein, antimicrobial fabrics using a known bacteriostatic and fungistatic drug zinc pyrithione (ZPT) have been reported. ZPT was synthesized in situ on cellulosic fabric, viscose (VC), using a zinc metal precursor and 2-mercaptopyridine-N-oxide as a ligand (VC-ZPT). For comparison, viscose was also phosphorylated (VP) before in situ functionalization with ZPT (VP-ZPT). Both approaches provided adequate protection from microbes; however, functionalization of cellulose with phosphate (VP) resulted in the formation of a linking group between cellulose and ZPT, which exhibited better uniformity of ZPT over the fabric surface and higher durability to washing. The functionalization was confirmed by inductively coupled plasma mass spectroscopy (ICP-MS), scanning electron microscopy (SEM), and Raman spectroscopy. Further, the bonding of phosphate with ZPT was confirmed by ³¹P solid-state NMR. The physical properties, such as appearance, bending length, and mechanical strength, of the treated fabrics remained unchanged. The antimicrobial activities of VP-ZPT with VC-ZPT were studied against Escherichia coli, Staphylococcus aureus, and Candida albicans, which were found to be effective until 20 laundry cycles in VP-ZPT. Additionally, VP-ZPT samples exhibited poor adherence of bacteria on the fabric surface. The functionalized fabrics may find applications for topical skin diseases in reducing the necessity of repeated use of antibiotic ointments.

Antimicrobial and Antiviral Activities of Durable Cotton Fabrics Treated with Nanocomposite Based on Zinc Oxide Nanoparticles, Acyclovir, Nanochitosan, and Clove Oil

In this study, cotton fabrics based on zinc oxide nanoparticles in situ synthesis, acyclovir, nanochitosan, and clove oil were treated. The treated cotton fabrics were examined by FTIR, HR-TEM, FE-SEM, EDAX, and the surface roughness processing of FE-SEM images. The obtained characterization data emphasized the nano-size of nanocomposite with high homogeneity of particles in spherical shape as well as affirmed the deposition of nanocomposite onto the textile fibers with concluded that the deposition of nanocomposite was increased parallel with sonication time. Antimicrobial and antiviral activities of treated cotton fabrics were evaluated. Results revealed that treated cotton fabrics exhibited promising antibacterial activity toward Gram-positive higher than Gram-negative bacteria. Likewise, treated cotton fabrics are still effective as antibacterial after washing for 100 cycles. Moreover, treated cotton fabrics exhibited potential antifungal activity against Candida albicans, Aspergillus niger, and Aspergillus fumigatus. The antiviral activity significantly depended on the type of virus. The treated cotton fabrics showed antiviral activity against tested viral particles (HSV-1, Adeno, and CoxB2) with viral inhibition of 95.9, 76.4, and 86.9% respectively, while in the case of coated cotton textile with acyclovir, it only exhibited viral inhibition of 49.9, 41, and 22.3% respectively.

Research advances in the fabrication of biosafety and functional leather: A way-forward for effective management of COVID-19 outbreak

With the recent events following the pandemic COVID-19, global awareness about the use of biosafety materials has been in raise. Leather industry being a major commodity-driven sector, its role in addressing the issues concerning the safe use of leather products has become inevitable for the sustainability of the industry. A significant number of researches have been conducted to fabricate bio-safe leather by incorporating different types of antimicrobial agents during leather manufacturing. Besides, the increasing diversity in the development of synthetic materials and the impact of COVID-19 outbreak on automotive industry may create more demand from customers for incorporating different functionalities in leather without losing its inherent properties. Some of the key functionalities discussed include resistance to microbial growth, self-cleaning through superhydrophobicity and photocatalysis, thermal regulation, flame retardance and scented leather. This review focusses on the fabrication of such advanced functional leather materials over the past decade with special emphasis on antimicrobial leather. Some of the key factors elaborated in the review include the state of art approaches for the preparation of functional materials, mode of incorporation of the same into the leather matrix, the mechanism behind with a perspective on the challenges involved in fabrication for real-world applications. A major outcome of this review is that even though several kinds of cutting edge researches are happening in the field of leather manufacturing, most of them were not validated for its practical applicability and sustainability of the proposed solution. This could be majorly attributed to the cost involved in fabrication of such materials, which forms a crucial factor when it comes to a mass production industry such as leather. Also, the researchers should concentrate on the toxicity of the fabricated materials which can impede the process of adopting such emerging and need of the hour technologies in the near future. Knowledge obtained from this review on fabrication of bio-safety leather against bacteria, mold and fungi would help further to integrate the antiviral property into the same which is a global need. Also, fabrication of functionalized leather would open new avenues for leather manufactures to venture into the development of advanced leather products such as flexible electronics, radiation shielding and fire fighting garments etc.

Sex-related response in mice after sub-acute intraperitoneal exposure to silver nanoparticles

Silver nanoparticles (AgNPs) are among the most commercialized nanomaterials in biomedicine due to their antimicrobial and anti-inflammatory properties. Nevertheless, possible health hazards of exposure to AgNPs are yet to be understood and therefore raise public concern in regards of their safety. In this study, sex-related differences, role of steroidal hormones and influence of two different surface stabilizing agents (polymer vs. protein) on distribution and adverse effects of AgNPs were investigated in vivo. Intact and gonadectomised male and female mice were treated with seven AgNPs doses administered intraperitoneally during 21 days. After treatment, steroid hormone levels in serum, accumulation of Ag levels and oxidative stress biomarkers in liver, kidneys, brain and lungs were determined. Sex-related differences were observed in almost all tissues. Concentration of Ag was significantly higher in the liver of females compared to males. No significant difference was found for AgNP accumulation in lungs between females and males, while the lungs of intact males showed significantly higher Ag accumulation compared to gonadectomised group. Effect of surface coating was also observed, as Ag accumulation was significantly higher in kidneys and liver of intact females, as well as in kidneys and brain of intact males treated with protein-coated AgNPs compared to polymeric AgNPs. Oxidative stress response to AgNPs was the most pronounced in kidneys where protein-coated AgNPs induced stronger effects compared to polymeric AgNPs. Interestingly, protein-coated AgNPs reduced generation of reactive oxygen species in brains of females and gonadectomised males. Although there were no significant differences in levels of hormones in the AgNP-exposed animals compared to controls, sex-related differences in oxidative stress parameters were observed in all organs. Results of this study highlight the importance of including the sex-related differences and effects of protein corona in biosafety evaluation of AgNPs exposure.

Antibacterial potency, cell viability and morphological implications of copper oxide nanoparticles encapsulated into cellulose acetate nanofibrous scaffolds

It is generally believed that the most challenging impediment for the utilization of cellulose acetate (CA) in the medical field is its hydrophobicity and disability to poison the harmful microbes. Therefore, in this contribution, we aimed to prepare an environmentally scaffold-based CA loaded with copper nanoparticles (CuONPs), which are expected to not only improve the hydrophilicity of the prepared nanofibers, but also have an effective ability to kill such harmful and infectious microbes that are abundant in wounds. The obtained results attested that the generated nanofibers became thicker with increasing the content of CuONPs in CA nanofibers. The roughness average increased from 143.2 to 157.1 nm, whereas the maximum height of the roughness (Rt) increased from 400.8 to 479.9 nm as going from the lowest to the highest content of CuONPs. Additionally, the contact angle of the prepared nanofibers decreased from 105.3° (CA alone) to 85.4° for CuONPs@CA. Significantly, biological studies revealed that cell viability and anti-bacterial potency were improved upon incorporating CuONPs into CA solution. Correspondingly, their inhibition zones reached 18 ± 3 mm, and 16 ± 2 mm for nanofibrous scaffolds having 12.0CuO@CA, besides raising the cell viability from 91.3 ± 4% to 96.4 ± 4% for 0.0CuO@CA, and 12.0CuO@CA, respectively, thereby implying that the fabricated CuONPs@CA nanocomposite has biocompatibility towards fibroblast cells. Thus, introducing biological activity into CA nanofibers via loading with CuONPs makes it suitable for numerous biomedical applications, particularly as an environmentally benign wound dressing fibers.

Formation of silver nanoparticles in aquatic environments facilitated by algal extracellular polymeric substances: Importance of chloride ions and light

Natural conversion of metal species is an important source for nanoscale metal particles in the aquatic environment, and it could affect their fate and toxicity. Extracellular polymeric substances (EPSs) are ubiquitous and abundant in the aquatic environment, thus likely can reduce metal ions to nanoscale particles. However, the effect of natural inorganic ligand and light on this process has not been well investigated. In this work, Ag⁺ was readily reduced to silver nanoparticles (AgNPs, around 15 nm in size) by the EPS collected from Chlorella pyrenoidosa. AgNPs could be generated in the dark environment but at a slow rate. Visible light accelerated the photoreduction. The reaction mechanism probed by Fourier transform infrared spectroscopy and three-dimensional excitation-emission matrix spectrometry demonstrated that the reduction in Ag⁺ was attributed to the protein and polysaccharides in the EPS. The presence of chloride ions (Cl^-) largely shortened the duration of photoreduction. Scanning electron microscopy results indicated that with the aid of EPS, the AgCl nanocrystal was converted to core-shell structure, with dot-like nano Ag acting as the shell and the AgCl nanocrystal acting as the core. Size and morphological changes were observed on transmission electron microscopy. This study adds new knowledge of the joint effect of light exposure, Cl^-, and EPS on the formation of AgNPs from Ag⁺ and advances the understanding of the natural formation mechanism of AgNPs.

Dyeing of cotton fabric materials with biogenic gold nanoparticles

The present work aimed at synthesizing gold nanoparticles in a biological method employing fruit peel waste dumped in the environment. The peels of Garcinia mangostana (Mangostan), were collected from the nearby tourist spot during the season. The collected fruit peels were washed, dried, powder and extracted by using boiling water and acetone. The precipitated extract was dried and powdered for further use. The dried and powdered peel extract was added to the gold solution and boiled to 80 °C and the color change is observed. The color change indicates the completion of the synthesis of gold nanoparticles. The effect of pH, gold ion concentration, peel extract powder concentration, and the temperature was tested by varying the parameters. The biosynthesized nanoparticles were characterized using the UV–Vis spectrophotometer to identify the surface plasmon resonance peaks corresponding to gold nanoparticles. The bio-moieties responsible for the synthesis of gold nanoparticles were identified using the Fourier Transform Infra-Red Spectroscopy. The crystalline nature was detected by using an X-Ray Diffractometer. Atomic Force Microscope viewed the 3D surface image of the gold nanoparticle. The shape and morphology of the nanoparticle were identified by using a Field Emission Scanning Electron Microscope. The active compounds for gold nanoparticle synthesis were identified using Gas Chromatography-Mass Spectrometry. The gold nanoparticle was synthesized in various colors and used for dyeing cotton fabrics. The dyed cotton materials were exposed to various stress conditions to determine the color fastening.

Antibacterial Textile Based on Hydrolyzed Milk Casein

Antimicrobial textile structures are developed based on polypropylene (PP) and a natural material, hydrolyzed casein. The casein, from bovine milk, is subjected to acid hydrolysis in aqueous media, then blended into the PP matrix in the melt phase by extrusion. The obtained blend, containing 5 wt.% of hydrolyzed casein, is then processed by a melt spinning process to get multifilaments, leading to the production knitting structures. Thanks to the addition of the hydrolyzed casein, the obtained textile showed a strong antibacterial activity towards both Gram (+) and Gram (−) bacterial strains. The addition of 5 wt.% hydrolyzed casein does not significantly impact the mechanical properties of PP in the dumbbells form, but a small decrease was observed in the tenacity of the filaments. No moisture retention was observed after the addition of hydrolyzed casein, but the rheological behavior was slightly affected. The obtained results can contribute to addressing concerns regarding nonrenewable antibacterial agents used in textile materials, particularly their effects on the environment and human health, by offering antibacterial agents from a biobased and edible substance with high efficiency. They are also promising to respond to issues of wasting dairy products and recycling them, in addition to the advantages of using melt processes.

A review of smart electrospun fibers toward textiles

Electrospinning as a versatile technology has attracted a large amount of attention in the past few decades due to the facile way to produce micro- and nano-scale fibers featuring flexibility, large specific surface area and high porosity. Stimuli-responsive polymers are a class of smart materials that are capable of sensing surround environment and interacting with them. Therefore, the combination of electrospinning and smart materials could have a great deal of benefits over the development of smart fibers. In this review, it offers a comprehensive understanding of smart electrospun fibers toward textile applications. Firstly, the definition of smart fibers and the differences between interactive fibers and passive interactive fibers are briefly introduced. Then some interactive fibers made from temperature-, pH-, light-, electric field/electricity-, magnetic field-, multi-responsive polymers, as well as some polymers featuring piezoelectric and triboelectric effect which are suitable flexible electrics, are emphasized with their applications in the form of electrospun fibers. Afterwards, some passive and hybrid smart electrospun fibers are introduced. Finally, associated challenges and perspectives are summarized and discussed.

•

Understanding of passive smart electrospun fibers and interactive smart electrospun fibers.

•

The recent progress in flexible electronics from electrospun fibers.

•

The recent progress in stimuli-responsive polymers applied in interactive smart electrospun fibers.

Sustainable Use of Nanomaterials in Textiles and Their Environmental Impact

At present, nanotechnology is a priority in research in several nations due to its massive capability and financial impact. However, due to the uncertainties and abnormalities in shape, size, and chemical compositions, the existence of certain nanomaterials may lead to dangerous effects on the human health and environment. The present review includes the different advanced applications of nanomaterials in textiles industries, as well as their associated environmental and health risks. The four main textile industry fields using nanomaterials, nanofinishing, nanocoatings, nanofibers, and nanocomposites, are analyzed. Different functional textiles with nanomaterials are also briefly reviewed. Most textile materials are in direct and prolonged contact with our skin. Hence, the influence of carcinogenic and toxic substances that are available in textiles must be comprehensively examined. Proper recognition of the conceivable benefits and accidental hazards of nanomaterials to our surroundings is significant for pursuing its development in the forthcoming years. The conclusions of the current paper are anticipated to increase awareness on the possible influence of nanomaterial-containing textile wastes and the significance of better regulations in regards to the ultimate disposal of these wastes.

Facile Route for Synthesis of Novel Flame Retardant, Reinforcement and Antibacterial Textile Fabrics Coatings

New and innovative textile fabrics coatings were facilely developed. The coating was developed based on synthesis of novel charring and antibacterial organic agent in conjunction with chitosan. N-[2,3-dibromo-4-(4-methoxy-3-methylphenyl)-4-oxobutanoyl]anthranilic acid was synthesized as organic antibacterial, reinforcement, and charring agent (OA) and then, dispersed in chitosan solution followed by coating on textile fabrics using immersion route forming new flame retardant coating layer. The developed organic molecule structure was elucidated using spectroscopic techniques. The mass loadings of developed organic agent dispersed in chitosan solution were varied between 20–60 wt.%. The coated textile fabrics have special surface morphology of fiber shape aligned on textile fibers surface. The thermal stability and charring residues of the coated textile fabrics were enhanced when compared to blank and organic agent free coated samples. Furthermore, the flammability properties were evaluated using LOI (limiting oxygen index) and UL94 tests. Therefore, the coated textile fabrics record significant enhancement in flame retardancy achieving first class flame retardant textile of zero mm/min rate of burning and 23.8% of LOI value compared to 118 mm/min. rate of burning and 18.2% for blank textile, respectively. The tensile strength of the coated textile fabrics was enhanced, achieving 51% improvement as compared to blank sample. Additionally, the developed coating layer significantly inhibited the bacterial growth, recording 18 mm of clear inhibition zone for coated sample when compared to zero for blank and chitosan coated ones.

Development of Durable Antibacterial Textile Fabrics for Potential Application in Healthcare Environment

Recently, efforts at development of functional textiles with antibacterial effect have accelerated, the purpose being to provide protection against airborne bio-particles and micro-organisms. Growth of microbes on surface of textile materials can be inhibited by biocidal approach and biostatic approach. This paper describes the development of a healthcare textile with durable antibacterial properties by optimizing the conventional and commercialized antimicrobial agent polybiguanide derivative—poly(hexamethylenebiguanide) (PHMB). Pad-dry-cure method was used to coat PHMB on cotton fabrics. The durability to simulated healthcare laundering of the fabric samples was evaluated in detail. Specifically, effects of detergent and washing cycles were examined. It was found that the optimum finishing condition can impart to the fabrics excellent durability for simulated healthcare washing. The fabric samples showed 100% bactericidal effect after 52 washing cycles, and 104 washings slightly reduced the bactericidal activity. Nevertheless, both simulated healthcare washing and coating treatment were found to have slightly negative influence on the hand feel and tearing strength properties of cotton fabrics.

Soil Application of Nano Silica on Maize Yield and Its Insecticidal Activity Against Some Stored Insects After the Post-Harvest

Maize is considered one of the most imperative cereal crops worldwide. In this work, high throughput silica nanoparticles (SiO2-NPs) were prepared via the sol–gel technique. SiO2-NPs were attained in a powder form followed by full analysis using the advanced tools (UV-vis, HR-TEM, SEM, XRD and zeta potential). To this end, SiO2-NPs were applied as both nanofertilizer and pesticide against four common pests that infect the stored maize and cause severe damage to crops. As for nanofertilizers, the response of maize hybrid to mineral NPK, “Nitrogen (N), Phosphorus (P), and Potassium (K)” (0% = untreated, 50% of recommended dose and 100%), with different combinations of SiO2-NPs; (0, 2.5, 5, 10 g/kg soil) was evaluated. Afterward, post-harvest, grains were stored and fumigated with different concentrations of SiO2-NPs (0.0031, 0.0063. 0.25, 0.5, 1.0, 2.0, 2.5, 5, 10 g/kg) in order to identify LC50 and mortality % of four common insects, namely Sitophilus oryzae, Rhizopertha dominica, Tribolium castaneum, and Orizaephilus surinamenisis. The results revealed that, using the recommended dose of 100%, mineral NPK showed the greatest mean values of plant height, chlorophyll content, yield, its components, and protein (%). By feeding the soil with SiO2-NPs up to 10 g/kg, the best growth and yield enhancement of maize crop is noticed. Mineral NPK interacted with SiO2-NPs, whereas the application of mineral NPK at the rate of 50% with 10 g/kg SiO2-NPs, increased the highest mean values of agronomic characters. Therefore, SiO2-NPs can be applied as a growth promoter, and in the meantime, as strong unconventional pesticides for crops during storage, with a very small and safe dose.

Soil Application of Nano Silica on Maize Yield and Its Insecticidal Activity Against Some Stored Insects After the Post-Harvest

Maize is considered one of the most imperative cereal crops worldwide. In this work, high throughput silica nanoparticles (SiO₂-NPs) were prepared via the sol-gel technique. SiO₂-NPs were attained in a powder form followed by full analysis using the advanced tools (UV-vis, HR-TEM, SEM, XRD and zeta potential). To this end, SiO₂-NPs were applied as both nanofertilizer and pesticide against four common pests that infect the stored maize and cause severe damage to crops. As for nanofertilizers, the response of maize hybrid to mineral NPK, "Nitrogen (N), Phosphorus (P), and Potassium (K)" (0% = untreated, 50% of recommended dose and 100%), with different combinations of SiO₂-NPs; (0, 2.5, 5, 10 g/kg soil) was evaluated. Afterward, post-harvest, grains were stored and fumigated with different concentrations of SiO₂-NPs (0.0031, 0.0063. 0.25, 0.5, 1.0, 2.0, 2.5, 5, 10 g/kg) in order to identify LC₅₀ and mortality % of four common insects, namely Sitophilus oryzae, Rhizopertha dominica, Tribolium castaneum, and Orizaephilus surinamenisis. The results revealed that, using the recommended dose of 100%, mineral NPK showed the greatest mean values of plant height, chlorophyll content, yield, its components, and protein (%). By feeding the soil with SiO₂-NPs up to 10 g/kg, the best growth and yield enhancement of maize crop is noticed. Mineral NPK interacted with SiO₂-NPs, whereas the application of mineral NPK at the rate of 50% with 10 g/kg SiO₂-NPs, increased the highest mean values of agronomic characters. Therefore, SiO₂-NPs can be applied as a growth promoter, and in the meantime, as strong unconventional pesticides for crops during storage, with a very small and safe dose.

Wound healing of nanofiber comprising Polygalacturonic/Hyaluronic acid embedded silver nanoparticles: In-vitro and in-vivo studies

The current study is pertaining to develop a novel wound dressing, comprising natural biologically absorbable materials for wound healing In-vivo. Wound dressing is composed of Polygalacturonic acid, Hyaluronic acid embedded silver nanoparticles, which is further fabricated to form nanofibrous mat, using electrospinning. Silver nanoparticles was prepared using PGA. AgNPs in this formula will serve as an antioxidant and anti-inflammatory that protect cells from destructive effect of elevated ROS and accelerate wound healing. The physical performance and water contact angle for nanofiber was evaluated. The produced nanofiber was characterized by Fourier-transform infrared (FTIR), scanning electron microscopy and thermal analysis. Also, the embedded AgNPs was also characterized by UV-vis spectroscopy and TEM. The nanofiber mates embedded AgNPs was applied to the wounded site of albino rats in-vivo. Histopathological assessment for the wound was fully performed. Also, the antimicrobial activity for the fabricated wound dressing was evaluated against gram+ve and gram -ve bacteria.

Utilization of High throughput microcrystalline cellulose decorated silver nanoparticles as an eco-nematicide on root-knot nematodes

The present study aimed to evaluate the influence of high throughput microcrystalline cellulose embedded silver nanoparticles (Ag-NPs), as an alternative eco-nematicide on Root-knot nematode (Meliodogyne incognita), which deem the main reason toward the loss of more than 20% in crops worldwide. In this work, Ag-NPs was prepared in very high concentration. Ag-NPs prepared using such technique has many advantages such as: absence of organic or solvents, scaling up thru using high concentration of silver precursor and utilization of environmentally benign polymer; Microcrystalline Cellulose (MCC). At the beginning, the bulk Ag-NPs colloidal solution is diluted to 5, 10, 15, 20, 25, 30, 40, 50, 60, 75, 80 and 100 ppm. Then, heavily galled roots of annual seed-propagated weed, Solanum nigrum L. family Solanaceae were selected to identify the Meloidogyne species and followed by treatment with the previously Ag-NPs concentrations. Results obtained after 24 h incubation, showed the highest mortality (M%) (40.36 ± 1.15%) which was achieved by means of 20 ppm of Ag-NPs compared with the highest concentration of Ag-NPs; 100 ppm (42.85 ± 3.51%). It was obviously noticed that, by increasing the concentration of Ag-NPs, M % decreased. On the other hand, after 48 h, 30 ppm Ag-NPs showed the highest M%; (52.82 ± 0.57%), while, after 72 h of treatments, the M% reached 95.53 ± 0.57% using 40 ppm Ag-NPs, then decreased to 66.67 ± 2.00% using 100 ppm Ag-NPs. All previous finding affirms the effectiveness of lower concentrations of Ag-NPs compared with the highest one, after 72 h. In conclusion, Ag-NPs could be successfully used as eco-nematicide for Root-knot nematodes; Meloidogyne incognita with a recommended dose of 20-40 ppm that is acquired higher M% and caused many aberrations during the different growth stages.

Analysis of silver-associated proteins in pathogen via combination of native SDS-PAGE, fluorescent staining, and inductively coupled plasma mass spectrometry

Characterization of silver-associated proteins is important to elucidate underlined mechanisms of silver-containing materials against microbes. Gel electrophoresis based methods are the most popular and basic strategy for the analysis of biomolecules, i.e., proteins and nucleic acids. It solely provides molecular weights of analytes. Extending the method from molecular weight to elemental composition is highly desired when investigating metal-containing molecules. Herein, a gel electrophoresis based method combining native sodium dodecyl sulfate-polyacrylamide gel electrophoresis (native SDS-PAGE), fluorescent staining, and inductively coupled plasma mass spectrometry (ICP-MS) strategy was developed for separation and detection of silver-associated proteins. Two home-made silver-labeled proteins, carbonic anhydrase and ovalbumin, were used for validation of the strategy performance. Silver-associated proteins in Pseudomonas aeruginosa and Staphylococcus aureus treated with silver nanoparticles were further characterized by this method. Some well-known and new proteins were identified to associate to silver in both P. aeruginosa and S. aureus, demonstrating the feasibility of the developed strategy. In conclusion, the current study provides a convenient method for readily identification of silver-associated proteins in biological samples.

Assessment of silver nanoparticles decorated starch and commercial zinc nanoparticles with respect to their genotoxicity on onion

High throughput production of silver nanoparticles (AgNPs) having controlled size appropriate for industrial purposes were achieved via using facile and ecofriendly chemical reduction method. Native rice starch was used as reductant for silver ions (Ag⁺) to silver atoms (Ag⁰), as well as stabilizing for the obtainable AgNPs. Two different concentrations; 2000 ppm and 4000 ppm were successfully prepared and coded as AgNPs-2000 and AgNPs-4000 respectively. The attained AgNPs were characterized via ultra-visible (UV-vis) spectra, Transmission Electron Microscope (TEM), Energy dispersive X-ray (EDX), Particle size analyzer, polydispersity index (PDI) and zeta potential (ζ-potential). The average particle size of AgNPs (2000 ppm) was 8 nm with PDI = 0.01 which affirm the monodispersity and homogeneity of the produced AgNPs. Meanwhile, the size majority for the as prepared AgNPs (4000 ppm) was 24 nm with PDI = 0.021. Based on the aforementioned data, AgNPs prepared with a high concentration (4000 ppm) compared with the commercialized ZnNPs were used for the genotoxicity study on onion. Root-tips was used for cytogenetic studies using onion (Allium cepa L.) which are excellent materials for cytological and genotoxicity studies. Genotoxicity results explored that, by using AgNPs ≥40 ppm, the abnormalities disturbed chromosomes were observed and detected, that reflects the genotoxicity effect of these nanoparticles at this dose. In addition, the commercial available ZnNPs with the recommended dose (2 g/L) displayed also severe genotoxicity on A. cepa L. root meristem cells.

Funtionalization and Mechanical Propeties of Cotton Fabric with ZnO Nanoparticles for Antibacterial Textile Application

Cotton fibre has been widely used for clothing applications since thousand years ago. However, the products made of cotton fibre can be easily deteriorated by microoganisms due to its natural feature and moisture affinity. This will lead to loss of mechanical strength as well as hygiene problems. Zinc oxide nanoparticles (ZnO NPs) have shown antimicrobial effects on many microorganisms. Due to the lack of bonding between ZnO and cotton fabric and improve mechanical strength, PVA is applied onto ZnO and cotton fabric by dip coating. In this study, the presence of ZnO NPs are determined by SEM and XRD. The crystal size of ZnO NPs are approximately 25 ~ 35 nm. The optimum tensile strength occurred at 0.20 M ZnO and 15 g PVA. The antibacterial efficiency against S. aureus is tested by disc diffusion test. It found that increased ZnO NPs and PVA concentration, increased inhibition zone and thus showed good antibacterial activity.

Silver nanomaterials in the natural environment: An overview of their biosynthesis and kinetic behavior

Silver nanomaterials (Ag NMs) are fabricated by many biological components in our environment. Recently, research on their biosynthesis and reactions has become a focus of attention. Due to the complexity of biological systems and samples, specific processes and mechanisms involving Ag NMs are difficult to identify and elucidate on the molecular and chemical-bond level. The microorganisms and composite components of plant extracts are of great interest in many biological syntheses. Although potential biomolecules have been shown to play essential roles in biological systems in Ag NM biosynthesis, the detailed mechanism of the electron transfer process and crucial molecules that control this reaction have only recently come into focus. The reactive behavior of the Ag NMs is of great significance for understanding their overall behavior and toxicity. Additionally, only limited knowledge is available about their kinetics. All reactions involve chemical bond formation, electron transfer, or electrostatic interactions. An overview is presented of the biosynthesis of Ag NMs based on molecular supports including a nitrate reductase/NADH oxidase-involved electron transfer reaction and their mechanisms in Ag⁺ reduction: quinol-mediated mechanism and superoxide-dependent mechanism, and molecular supports in plant extracts, is presented. The environmental reaction kinetics and mechanisms of the interactions of Ag NMs with substances are introduced based on the formation and classification of chemical bonds. The particle-particle reaction kinetics of Ag NMs in the environment are discussed to directly explain their stability and aggregation behavior. The toxicity of Ag NMs is also presented. In addition, future prospects are summarized. This review is the first to provide an insight into the mediating molecules and chemical bonds involved in the biosynthesis, kinetics, and mechanisms of action of Ag NMs.

Characterization of Airborne Particle Release from Nanotechnology-enabled Clothing Products

This study investigated airborne particle release from seventeen nanotechnology-enabled clothing items, including eleven items that were advertised as containing silver nanoparticles. Clothing wear was simulated using an abrader, where the rotating clothing samples came in contact with felt abrader wheels, and size distribution and concentration of the released particles were measured using a Scanning Mobility Particle Sizer and Aerodynamic Particle Sizer. Through the use of inductively coupled plasma mass spectrometry, silver was detected in all eleven products advertised as containing silver, and its concentration varied from approximately 1 ppm to ~1.5×10⁵ ppm depending on the product. Nano-sized particles, as well as larger agglomerates, were released from all investigated products with concentrations as high as ~2×10⁴ particles/cm³; the concentration and size distribution varied substantially from product to product, and silver-based clothing tended to release smaller and higher number concentrations of particles than products where fibers were formulated using nanotechnology. Examination of the released particles using TEM confirmed the presence of manufactured nanoparticles; airborne sample analysis using SEM/EDS showed that the released particles contained Ag as well as other metals. This study can be valuable for the risk assessment of nanotechnology-based consumer goods, especially clothing containing silver.