Occurrence of cellobiose residues directly linked to galacturonic acid in pectic polysaccharides

Sustainable valorisation of bioactive molecules from rice husks through hydrothermal extraction for chitosan-based bioplastic production

Rice husks are a low value byproduct, even though it possesses molecules with great potential, such as arabinoxylans, proteins, and silica. These molecules can be used to improve mechanical and physicochemical properties of materials for food packaging. In this work, hydrothermal treatment was used for a sustainable extraction of the valuable molecules present in rice husks. Various extraction temperatures (180, 200, and 220 °C) were performed targeting to extract fractions with distinct compositions. The water extract obtained at 220 °C demonstrated the highest extraction yield, 3 times superior to conventional hot water extraction. These extracts exhibited high content of proteins, phenolic compounds, and carbohydrates, particularly arabinoxylans. This extract was incorporated in chitosan-based films in different ratios, 1:0.1, 1:0.3, and 1:0.5 (chitosan:extract, w:v). The film with the lowest extract ratio presented the highest flexibility (higher elongation and lower Young's modulus) when compared to the pristine chitosan film. The antioxidant capacity was also increased, achieving an antioxidant capacity of >10-fold in comparison to control film. The results revealed that hydrothermal extraction emerges as an environmentally friendly and sustainable methodology for extracting valuable compounds from rice industry byproducts. This method exhibits significant potential to impart flexible and antioxidant properties to biobased materials.

Polysaccharides polymers for glaucoma treatment-a review

One of the major challenges in preventing glaucoma progression is patient compliance with medication regimens. Since conventional ophthalmic dosage forms have numerous limitations, researchers have been intensively working on developing polymers-based delivery systems for glaucoma drugs. Specifically, research and development efforts have increased using polysaccharide polymers such as sodium alginate, cellulose, β-cyclodextrin, hyaluronic acid, chitosan, pectin, gellan gum, galactomannans for sustained release to the eye to overcome treatment challenges, showing promise in improving drug release and delivery, patient experience, and treatment compliance. In the recent past, multiple research groups have successfully designed sustained drug delivery systems, promoting the efficacy as well as the feasibility of glaucoma drugs with single/combinations of polysaccharides to eliminate the drawbacks associated with the glaucoma treatment. Naturally available polysaccharides, when used as drug vehicles can increase the retention time of eye drops on the ocular surface, leading to improved drug absorption and bioavailability. Additionally, some polysaccharides can form gels or matrices that can release drugs slowly over time, providing sustained drug delivery and reducing the need for frequent dosing. Thus, this review aims to provide an overview of the pre-clinical and clinical studies of polysaccharide polymers applied for glaucoma treatment along with their therapeutic outcomes.

Biomechanics of a Plant-Derived Sealant for Corneal Injuries

Purpose

The corneal epithelium has a glycocalyx composed of membrane-associated glycoproteins, mucins, and galactin-3. Similar to the glycocalyx in visceral tissues, the corneal glycocalyx functions to limit fluid loss and minimize frictional forces. Recently, the plant-derived heteropolysaccharide pectin has been shown to physically entangle with the visceral organ glycocalyx. The ability of pectin to entangle with the corneal epithelium is unknown.

Methods

To explore the potential role of pectin as a corneal bioadhesive, we assessed the adhesive characteristics of pectin films in a bovine globe model.

Results

Pectin film was flexible, translucent, and low profile (80 µm thick). Molded in tape form, pectin films were significantly more adherent to the bovine cornea than control biopolymers of nanocellulose fibers, sodium hyaluronate, and carboxymethyl cellulose (P < 0.05). Adhesion strength was near maximal within seconds of contact. Compatible with wound closure under tension, the relative adhesion strength was greatest at a peel angle less than 45 degrees. The corneal incisions sealed with pectin film were resistant to anterior chamber pressure fluctuations ranging from negative 51.3 ± 8.9 mm Hg to positive 214 ± 68.6 mm Hg. Consistent with these findings, scanning electron microscopy demonstrated a low-profile film densely adherent to the bovine cornea. Finally, the adhesion of the pectin films facilitated the en face harvest of the corneal epithelium without physical dissection or enzymatic digestion.

Conclusions

We conclude that pectin films strongly adhere to the corneal glycocalyx.

Translational Relevance

The plant-derived pectin biopolymer provides potential utility for corneal wound healing as well as targeted drug delivery.

Structure-function relationships of pectic polysaccharides from broccoli by-products with in vitro B lymphocyte stimulatory activity

To study structure-function relationships of pectic polysaccharides with their immunostimulatory activity, broccoli by-products were used. Pectic polysaccharides composed by 64 mol% uronic acids, 18 mol% Ara, and 10 mol% Gal, obtained by hot water extraction, activated B lymphocytes in vitro (25-250 μg/mL). To disclose active structural features, combinations of ethanol and chromatographic fractionation and modification of the polysaccharides were performed. Polysaccharides insoluble in 80 % ethanol (Et80) showed higher immunostimulatory activity than the pristine mixture, which was independent of molecular weight range (12-400 kDa) and removal of terminal or short Ara side chains. Chemical sulfation did not promote B lymphocyte activation. However, the action of pectin methylesterase and endo-polygalacturonase on hot water extracted polysaccharides produced an acidic fraction with a high immunostimulatory activity. The de-esterified homogalacturonan region seem to be an important core to confer pectic polysaccharides immunostimulatory activity. Therefore, agri-food by-products are a source of pectic polysaccharide functional food ingredients.

Modification of chicha gum: Antibacterial activity, ex vivo mucoadhesion, antioxidant activity and cellular viability

The aim of the present work was to modify the exuded gum of Sterculia striata tree by an amination reaction. The viscosity and zero potential of the chicha gum varied as a function of pH. The modification was confirmed by X-ray diffraction (XRD), infrared spectroscopy (FTIR), size exclusion chromatography (SEC), zeta potential, thermogravimetric analysis (TG), and differential scanning calorimetry (DSC). Furthermore, the chemical modification changed the molar mass and surface charge of the chicha gum. In addition, the gums were used in tests for ex vivo mucoadhesion strength, antibacterial activity against the standard strain of Staphylococcus aureus (ATCC 25923), inhibitory activity of α-glucosidase, antioxidant capacity, and viability of Caco-2 cells. Through these tests, it was found that amination caused an increase in the mucoadhesive and inhibitory activity of chicha gum against the bacterium Staphylococcus aureus. In addition, the gums (pure and modified) showed antioxidant capacity and an inhibitory effect against the α-glucosidase enzyme and did not show cytotoxic potential.

Novel Pectic Polysaccharides Isolated from Immature Honey Pomelo Fruit with High Immunomodulatory Activity

A novel pectic polysaccharide (HPP-1) with high immunomodulatory activity was extracted and isolated from the immature honey pomelo fruit (Citrus grandis). Characterization of its chemical structure indicated that HPP-1 had a molecular weight of 59,024 D. In addition, HPP-1 was primarily composed of rhamnose, arabinose, fucose, mannose, and galactose at a molar ratio of 1.00:11.12:2.26:0.56:6.40. Fourier-transform infrared spectroscopy, periodic acid oxidation, and Smith degradation results showed that HPP-1 had α- and β-glycosidic linkages and 1 → 2, 1 → 4, 1 → 6, and 1 → 3 glycosidic bonds. ¹³C NMR and ¹H NMR analyses revealed that the main glycogroups included 1,4-D-GalA, 1,6-β-D-Gal, 1,6-β-D-Man, 1,3-α-L-Ara, and 1,2-α-L-Rha. Immunomodulatory bioactivity analysis using a macrophage RAW264.7 model in vitro revealed that NO, TNF-α, and IL-6 secretions were all considerably increased by HPP-1. Moreover, RT-PCR results showed that HPP-1-induced iNOS, TNF-α, and IL-6 expression was significantly increased in macrophages. HPP-1-mediated activation in macrophages was due to the stimulation of the NF-κB and MAPK signaling pathways based on western blot analyses. HPP-1 extracted from immature honey pomelo fruit has potential applications as an immunomodulatory supplement.

Impact of Crosslinking on the Characteristics of Pectin Monolith Cryogels

In this research, the pectin monoliths were prepared via the sol-gel process through different routes of crosslinking and additional freeze-drying. The crosslinking reaction was induced by the use of calcium ions in aqueous solutions and in alcohol/water solutions. The resulting pectin monoliths obtained by freeze-drying were macroporous with open cells, limited specific surface area, moderate mechanical stability and moderate biodegradation rate. The presence of alcohol in crosslinking solution significantly changed the morphology of final pectin monoliths, which was evidenced by the reduction of their pore size for one order. The specific surface area of pectin monoliths obtained through the calcium-water-alcohol route was 25.7 m²/g, the Young compressive modulus was 0.52 MPa, and the biodegradation rate was 45% after 30 days of immersion in compost media. Considering that pectin can be obtained from food waste, and its physical properties could be tailored by different crosslinking routes, the pectin monoliths could find wide application in the pharmaceutical, agricultural, medical and food industries, providing sustainable development concepts.

Assessment of metal exposure (uranium and copper) in fatty acids and carbohydrate profiles of Calamoceras marsupus larvae (Trichoptera) and Alnus glutinosa leaf litter

Physiological changes were explored in fatty acids (FA) and carbohydrate (CHO) composition in the shredder Calamoceras marsupus larvae (Trichoptera) and leaf litter (C. marsupus food) exposed to copper and uranium under natural and experimental conditions. We measured FA and CHO content in leaf litter and larvae specimens from reference and impacted streams, and exposed for 5 weeks to four realistic environmental concentrations of copper (35 μg L^-1 and 70 μg L^-1) and uranium (25 μg L^-1 and 50 μg L^-1). Regarding FA, (1) leaf litter had a reduced polyunsaturated FA (PUFA) content in metal treatments, s (14 to 33% of total FA), compared to natural conditions (≥39% of total FA). Leaf litter exposed to uranium also differed in saturated FA (SFA) composition, with lower values in natural conditions and higher values under low uranium concentrations. (2) C. marsupus had/showed low PUFA content under Cu and U exposure, particularly in high uranium concentrations. Detritivores also decreased in PUFA under exposure to both metals, particularly in high uranium concentrations. On the other hand, (1) microorganisms of the biofilm colonizing leaf litter differed in CHO composition between natural (impacted and reference) and experimental conditions, with glucose and galactose being consistently the most abundant sugars, found in different amounts under copper or uranium exposure; (2) CHO of detritivores showed similar high galactose and fucose concentrations in contaminated streams and high copper treatments, whereas low copper treatment showed distinct CHO profiles, with higher mannose, glucose, arabinose, and fucose concentrations. Our study provides evidence of metal exposure effects on FA and CHO contents at different trophic levels, which might alter the quality of food flow in trophic webs.

Optical and Mechanical Properties of Self-Repairing Pectin Biopolymers

Pectin’s unique physicochemical properties have been linked to a variety of reparative and regenerative processes in nature. To investigate the effect of water on pectin repair, we used a 5 mm stainless-steel uniaxial load to fracture glass phase pectin films. The fractured gel phase films were placed on a 1.5–1.8 mm thick layer of water and incubated for 8 h at room temperature and ambient humidity. There was no immersion or agitation. The repaired pectin film was subsequently assessed for its optical and mechanical properties. Light microscopy demonstrated repair of the detectable fracture area and restoration of the films’ optical properties. The burst strength of the repaired film declined to 55% of the original film. However, its resilience was restored to 87% of the original film. Finally, a comparison of the initial and post-repair fracture patterns demonstrated no recurrent fissures in the repaired glass phase films. The water-induced repair of the pectin film was superior to the optical and mechanical properties of the repaired films composed of nanocellulose fibers, sodium hyaluronate, and oxidized cellulose. We conclude that the unique physicochemical properties of pectin facilitate the water-induced self-repair of fractured pectin films.

Covalently linked pectin-arabinoglucuronoxylan complex from Siberian fir Abies sibirica Ledeb

In this study, by NMR spectroscopy, first was proved that the pectic polysaccharides of Abies sibirica are covalently bound to arabinoglucuronoxylan (AGX). Namely, AGX is attached at the 4th position to the 1,2,4-α-L-Rha residues of the RG-I main chain, indicating the following fragment: …→2)-[(2,4-β-D-Xylp)-(1→4)]-[(α-D-GalpA-(1→2)]-α-L-Rhap-(1→4)-α-D-GalpA-(1→…. We present direct evidence of covalent attachment between C1 of 1,2,4-β-D-Xylp from arabinoglucuronoxylan and С4 of 1,2,4-α-L-Rhap from RG-I of pectin by detailed 2D NMR analyses. It can be concluded that the 1,2,4-α-L-Rhap residues, were substituted at the 4th position by 1,5-α-L-arabinan or 1,4-β-D-galactan or AGX. The discovery of this interglycosidic linkage between xylan and pectin contradicts the classical model of the cell wall, which describes networks of binding glycans and pectic polysaccharides as separate and independent of one another. We can conclude that pectin undoubtedly plays a more important supporting and cross-linking role in the cell wall than is commonly thought.

Functional Adhesion of Pectin Biopolymers to the Lung Visceral Pleura

Pleural injuries and the associated "air leak" are the most common complications after pulmonary surgery. Air leaks are the primary reason for prolonged chest tube use and increased hospital length of stay. Pectin, a plant-derived heteropolysaccharide, has been shown to be an air-tight sealant of pulmonary air leaks. Here, we investigate the morphologic and mechanical properties of pectin adhesion to the visceral pleural surface of the lung. After the application of high-methoxyl citrus pectin films to the murine lung, we used scanning electron microscopy to demonstrate intimate binding to the lung surface. To quantitatively assess pectin adhesion to the pleural surface, we used a custom adhesion test with force, distance, and time recordings. These assays demonstrated that pectin-glycocalyceal tensile adhesive strength was greater than nanocellulose fiber films or pressure-sensitive adhesives (p < 0.001). Simultaneous videomicroscopy recordings demonstrated that pectin-glycocalyceal adhesion was also stronger than the submesothelial connective tissue as avulsed surface remnants were visualized on the separated pectin films. Finally, pleural abrasion and hyaluronidase enzyme digestion confirmed that pectin binding was dependent on the pleural glycocalyx (p < 0.001). The results indicate that high methoxyl citrus pectin is a promising sealant for the treatment of pleural lung injuries.

Biomaterial-Assisted Anastomotic Healing: Serosal Adhesion of Pectin Films

Anastomotic leakage is a frequent complication of intestinal surgery and a major source of surgical morbidity. The timing of anastomotic failures suggests that leaks are the result of inadequate mechanical support during the vulnerable phase of wound healing. To identify a biomaterial with physical and mechanical properties appropriate for assisted anastomotic healing, we studied the adhesive properties of the plant-derived structural heteropolysaccharide called pectin. Specifically, we examined high methoxyl citrus pectin films at water contents between 17-24% for their adhesivity to ex vivo porcine small bowel serosa. In assays of tensile adhesion strength, pectin demonstrated significantly greater adhesivity to the serosa than either nanocellulose fiber (NCF) films or pressure sensitive adhesives (PSA) (p < 0.001). Similarly, in assays of shear resistance, pectin demonstrated significantly greater adhesivity to the serosa than either NCF films or PSA (p < 0.001). Finally, the pectin films were capable of effectively sealing linear enterotomies in a bowel simulacrum as well as an ex vivo bowel segment. We conclude that pectin is a biomaterial with physical and adhesive properties capable of facilitating anastomotic healing after intestinal surgery.

Microwave hydrodiffusion and gravity as a sustainable alternative approach for an efficient apple pomace drying

Apple pomace valuation has been impaired by its high perishability and absence of fast drying approaches demanded by industry. This work aimed to assess the feasibility of Microwave Hydrodiffusion and Gravity (MHG) process applied for apple pomace drying using discrete delivery powers (300-900 W) and comparison with hot-air drying (40-100 °C). To dry 0.4 kg of apple pomace (81% moisture), hot-air drying required 3.6-9.9 h with estimated water evaporation flux of 1.0-3.5 mL/min. For MHG, which processed 1.2 kg, these corresponded to 1.0-2.6 h and 5.1-13.9 mL/min. Furthermore, MHG allowed water recovery containing part of apple pomace phenolic compounds and carbohydrates. The dried pomace was stable for 2 years, after which phenolic compounds and polysaccharides were still recoverable by hot water extractions. These results pave the way for MHG to be used for apple pomace and other by-products preservation, boosting their conversion into valuable co-product for valuation of its components.

TEMPO/NaClO2/NaOCl oxidation of arabinoxylans

TEMPO-oxidation of neutral polysaccharides has been used to obtain polyuronides displaying improved functional properties. Although arabinoxylans (AX) from different sources may yield polyuronides with diverse properties due to their variable arabinose (Araf) substitution patterns, information of the TEMPO-oxidation of AX on its structure remains scarce. We oxidized AX using various TEMPO:NaClO₂:NaOCl ratios. A TEMPO:NaClO₂:NaOCl ratio of 1.0:2.6:0.4 per mol of Ara gave an oxidized-AX with high molecular weight, minimal effect on xylose appearance, and comprising charged side chains. Although NMR analyses unveiled arabinuronic acid (AraAf) as the only oxidation product in the oxidized-AX, accurate AraA quantification is still challenging. Linkage analysis showed that > 75 % of the β-(1→4)-xylan backbone remained single-substituted at position O-3 of Xyl similarly to native AX. TEMPO-oxidation of AX can be considered a promising approach to obtain arabinuronoxylans with a substitution pattern resembling its parental AX.

Grape pectic polysaccharides stabilization of anthocyanins red colour: Mechanistic insights

Grape pectic polysaccharides-malvidin-3-O- β -d-glucoside binding was studied, aiming to unveil the impact of structural diversity of polysaccharides on anthocyanins-polysaccharides interactions. Polysaccharides were extracted with solutions of imidazole (ISP) and carbonate at 4 °C (CSP-4 °C) and room temperature (CSP-RT) and also recovered from the dialysis supernatant of the remaining cellulosic residue after the aqueous NAOH extraction of hemicellulosic polysaccharides (Sn-CR). Polysaccharides richer in homogalacturonan domains, like those present in the CSP-4 °C fraction had approximately 50-fold higher binding affinity to malvidin-3-O- β-d-glucoside, than polysaccharides with side chains (as ISP and CSP-RT extractable polysaccharides). CSP-4 °C polysaccharides showed a positive effect on malvidin-3-O- β-d-glucoside colour fading. Hydration equilibrium constant of malvidin-3-O- β-d-glucoside in the presence of CSP-4 °C polysaccharides was higher, showing the preferential stabilization of the flavylium cation. The results showed that anthocyanins colour stabilization can be promoted by pectic polysaccharide structures such as those extracted by cold carbonate.

Visualizing pectin polymer-polymer entanglement produced by interfacial water movement

In this report, we investigated the physical conditions for creating pectin polymer-polymer (homopolymer) entanglement. The potential role of water movement in creating pectin entanglement was investigated by placing water droplets-equivalent to the water content of two gel phase films-between two glass phase films and compressing the films at variable probe velocities. Slow probe velocity (0.5 mm/sec) demonstrated no significant debonding. Corresponding videomicroscopy demonstrated an occasional water bridge, but no evidence of stranding or polymer entanglement. In contrast, fast probe velocity (5 mm/sec) resulted in 1) an increase in peak adhesion strength, 2) a progressive debonding curve, and 3) increased work of cohesion (p < .001). Corresponding videomicroscopy demonstrated pectin stranding and delamination between pectin films. Scanning electron microscopy images obtained during pectin debonding provided additional evidence of both stranding and delamination. We conclude that water movement can supply the motive force for the rapid chain entanglement between pectin films.

Pectin biopolymer mechanics and microstructure associated with polysaccharide phase transitions

Polysaccharide polymers like pectin can demonstrate striking and reversible changes in their physical properties depending upon relatively small changes in water content. Recent interest in using pectin polysaccharides as mesothelial sealants suggests that water content, rather than nonphysiologic changes in temperature, may be a practical approach to optimize the physical properties of the pectin biopolymers. Here, we used humidified environments to manipulate the water content of dispersed solution of pectins with a high degree of methyl esterification (high-methoxyl pectin; HMP). The gel phase transition was identified by a nonlinear increase in compression resistance at a water content of 50% (w/w). The gel phase was associated with a punched-out fracture pattern and scanning electron microscopy (SEM) images that revealed a cribiform (Swiss cheese-like) pectin microstructure. The glass phase transition was identified by a marked increase in resilience and stiffness. The glass phase was associated with a star-burst fracture pattern and SEM images that demonstrated a homogeneous pectin microstructure. In contrast, the burst strength of the pectin films was largely independent of water content over a range from 5 to 30% (w/w). These observations indicate the potential to use water content in the selective regulation of the physical properties of HMP biopolymers.

Analysis of pectin biopolymer phase states using acoustic emissions

Acoustic emissions are stress or elastic waves produced by a material under external load. Since acoustic emissions are generated from within and transmitted through the substance, the acoustic signature provides insights into the physical and mechanical properties of the material. In this report, we used a constant velocity probe with force and acoustic emission monitoring to investigate the properties of glass phase and gel phase pectin films. In the gel phase films, a constant velocity uniaxial load produced periodic premonitory acoustic emissions with coincident force variations (saw-tooth pattern). SEM images of the gel phase microarchitecture indicated the presence of slip planes. In contrast, the glass phase films demonstrated early acoustic emissions, but effectively no force or acoustic evidence of periodic or premonitory emissions. Microstructural imaging of the glass phase films indicated the presence of early microcracks as well as dense polymerization of the pectin (without evidence of slip planes). We conclude that the water content in the pectin films contributes to not only the physical properties of the films, but also the stick-slip motion observed with constant uniaxial load. Further, acoustic emissions provide a sensitive and practical measure of this mechanical behavior.

Nutritional Potential and Toxicological Evaluation of Tetraselmis sp. CTP4 Microalgal Biomass Produced in Industrial Photobioreactors

Commercial production of microalgal biomass for food and feed is a recent worldwide trend. Although it is common to publish nutritional data for microalgae grown at the lab-scale, data about industrial strains cultivated in an industrial setting are scarce in the literature. Thus, here we present the nutritional composition and a microbiological and toxicological evaluation of Tetraselmis sp. CTP4 biomass, cultivated in 100-m3 photobioreactors at an industrial production facility (AlgaFarm). This microalga contained high amounts of protein (31.2 g/100 g), dietary fibres (24.6 g/100 g), digestible carbohydrates (18.1 g/100 g) and ashes (15.2 g/100 g), but low lipid content (7.04 g/100 g). The biomass displayed a balanced amount of essential amino acids, n-3 polyunsaturated fatty acids, and starch-like polysaccharides. Significant levels of chlorophyll (3.5 g/100 g), carotenoids (0.61 g/100 g), and vitamins (e.g., 79.2 mg ascorbic acid /100 g) were also found in the biomass. Conversely, pathogenic bacteria, heavy metals, cyanotoxins, mycotoxins, polycyclic aromatic hydrocarbons, and pesticides were absent. The biomass showed moderate antioxidant activity in several in vitro assays. Taken together, as the biomass produced has a balanced biochemical composition of macronutrients and (pro-)vitamins, lacking any toxic contaminants, these results suggest that this strain can be used for nutritional applications.

Biochemical impacts in adult and juvenile farmed European seabass and gilthead seabream from semi-intensive aquaculture of southern European estuarine systems

The nutritional value and developmental variations of cultured fish were assessed for European seabass and gilthead seabream specimens reared in semi-intensive aquaculture systems in two Portuguese estuaries. Quantification of total protein and of carbohydrate and fatty acid profiles was carried out to determine differences between the composition of the same species in two development stages reared in four distinct farms. A significant influence of the rearing site on the nutritional composition of the same species was found for adult European seabass regarding saturated, monounsaturated and highly unsaturated fatty acids contents, both between estuaries and within each estuary. In gilthead seabream, saturated, monounsaturated, polyunsaturated and highly unsaturated fatty acids content were also influenced by the rearing site. Carbohydrate analysis showed a significant influence of the rearing site on free sugar and polysaccharide content in fish of both species, and there was no influence on the species' protein content. Differences in fatty acid and carbohydrate content among juvenile and adult stages were found for all the groups studied. The present study supported the existing evidence that semi-intensive rearing systems are subjected to the variability of extrinsic factors in the rearing sites, influencing the nutritional value of the same species, namely regarding lipid and carbohydrate profiles, depending on the production site. From a consumer's perspective, such differences may come as a disadvantage of the rearing method, as it is expected for a product to provide equal nutritional properties and benefits regardless its origin, especially within the same country.

Structural heteropolysaccharides as air-tight sealants of the human pleura

Pulmonary "air leaks," typically the result of pleural injury caused by lung surgery or chest trauma, result in the accumulation of air in the pleural space (pneumothorax). Air leaks are a major source of morbidity and prolonged hospitalization after pulmonary surgery. Previous work has demonstrated structural heteropolysaccharide (pectin) binding to the mouse pleural glycocalyx. The similar lectin-binding characteristics and ultrastructural features of the human and mouse pleural glycocalyx suggested the potential application of these polymers in humans. To investigate the utility of pectin-based polymers, we developed a simulacrum using freshly obtained human pleura. Pressure-decay leak testing was performed with an inflation maneuver that involved a 3 s ramp to a 3 s plateau pressure; the inflation was completely abrogated after needle perforation of the pleura. Using nonbiologic materials, pressure-decay leak testing demonstrated an exponential decay with a plateau phase in materials with a Young's modulus less than 5. In human pleural testing, the simulacrum was used to test the sealant function of four mixtures of pectin-based polymers. A 50% high-methoxyl pectin and 50% carboxymethylcellulose mixture demonstrated no sealant failures at transpleural pressures of 60 cmH2 O. In contrast, pectin mixtures containing 50% low-methoxyl pectin, 50% amidated low-methoxyl pectins, or 100% carboxymethylcellulose demonstrated frequent sealant failures at transpleural pressures of 40-50 cmH2 O (p < 0.001). Inhibition of sealant adhesion with enzyme treatment, dessication and 4°C cooling suggested an adhesion mechanism dependent upon polysaccharide interpenetration. We conclude that pectin-based heteropolysaccharides are a promising air-tight sealant of human pleural injuries. © 2018 Wiley Periodicals, Inc. J. Biomed. Mater. Res. Part B, 2018. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 799-806, 2019.

Interpenetrating network gelatin methacryloyl (GelMA) and pectin-g-PCL hydrogels with tunable properties for tissue engineering

The design of new hydrogel-based biomaterials with tunable physical and biological properties is essential for the advancement of applications related to tissue engineering and regenerative medicine. For instance, interpenetrating polymer network (IPN) and semi-IPN hydrogels have been widely explored to engineer functional tissues due to their characteristic microstructural and mechanical properties. Here, we engineered IPN and semi-IPN hydrogels comprised of a tough pectin grafted polycaprolactone (pectin-g-PCL) component to provide mechanical stability, and a highly cytocompatible gelatin methacryloyl (GelMA) component to support cellular growth and proliferation. IPN hydrogels were formed by calcium ion (Ca2+)-crosslinking of pectin-g-PCL chains, followed by photocrosslinking of the GelMA precursor. Conversely, semi-IPN networks were formed by photocrosslinking of the pectin-g-PCL and GelMA mixture, in the absence of Ca2+ crosslinking. IPN and semi-IPN hydrogels synthesized with varying ratios of pectin-g-PCL to GelMA, with and without Ca2+-crosslinking, exhibited a broad range of mechanical properties. For semi-IPN hydrogels, the aggregation of microcrystalline cores led to formation of hydrogels with compressive moduli ranging from 3.1 to 10.4 kPa. For IPN hydrogels, the mechanistic optimization of pectin-g-PCL, GelMA, and Ca2+ concentrations resulted in hydrogels with comparatively higher compressive modulus, in the range of 39 kPa-5029 kPa. Our results also showed that IPN hydrogels were cytocompatible in vitro and could support the growth of three-dimensionally (3D) encapsulated MC3T3-E1 preosteoblasts in vitro. The simplicity, technical feasibility, low cost, tunable mechanical properties, and cytocompatibility of the engineered semi-IPN and IPN hydrogels highlight their potential for different tissue engineering and biomedical applications.

Biochemical and biophysical characterization of water-soluble pectin from Opuntia ficus-indica and its potential cytotoxic activity

This work aims to fill the gap in the present knowledge about the structure of pectin from Opuntia ficus-indica. The water-soluble pectin (WSP) fraction, extracted with the Microwave Assisted Extraction (MAE), was further deproteinated (dWSP) and analyzed through several biophysical and biochemical techniques. HPSEC, light scattering and FTIR data showed that dWSP is low methylated high molecular weight pectin. The biochemical structure of dWSP, after methanolysis, silylation, carboxyl reduction showed that dWSP belongs to rhamnogalacturonan I class. Then, dWSP was heat-modified (HM) to obtain small-molecular weight deproteinated fraction (HM-dWSP). Both species, dWSP and HM-dWSP, were tested in LAN5 and NIH 3T3 model cells to study their biological effect. Results indicated that both dWSP and HM-dWSP exerted cytotoxic activity affecting selectively LAN5 cancer cells, without any effect on NIH 3T3 normal cells.

Functional Mechanics of a Pectin-Based Pleural Sealant after Lung Injury

Pleural injury and associated air leaks are a major influence on patient morbidity and healthcare costs after lung surgery. Pectin, a plant-derived heteropolysaccharide, has recently demonstrated potential as an adhesive binding to the glycocalyx of visceral mesothelium. Since bioadhesion is a process likely involving the interpenetration of the pectin-based polymer with the glycocalyx, we predicted that the pectin-based polymer may also be an effective sealant for pleural injury. To explore the potential role of an equal (weight%) mixture of high-methoxyl pectin and carboxymethylcellulose as a pleural sealant, we compared the yield strength of the pectin-based polymer to commonly available surgical products. The pectin-based polymer demonstrated significantly greater adhesion to the lung pleura than the comparison products (p < 0.001). In a 25 g needle-induced lung injury model, pleural injury resulted in an air leak and a loss of airway pressures. After application of the pectin-based polymer, there was a restoration of airway pressure and no measurable air leak. Despite the application of large sheets (50 mm2) of the pectin-based polymer, multifrequency lung impedance studies demonstrated no significant increase in tissue damping (G) or hysteresivity (η)(p > 0.05). In 7-day survival experiments, the application of the pectin-based polymer after pleural injury was associated with no observable toxicity, 100% survival (N = 5), and restored lung function. We conclude that this pectin-based polymer is a strong and nontoxic bioadhesive with the potential for clinical application in the treatment of pleural injuries.

Interactions between pectin and cellulose in primary plant cell walls

To understand the architecture of the plant cell wall, it is of importance to understand both structural characteristics of cell wall polysaccharides and interactions between these polysaccharides. Interactions between polysaccharides were studied in the residue after water and chelating agent extraction by sequential extractions with H₂O and alkali. The 6 M alkali residue still represented 31%, 11% and 5% of all GalA present in carrot, tomato and strawberry, respectively, and these pectin populations were assumed to strongly interact with cellulose. Digestion of the carrot 6 M alkali residue by glucanases released ∼27% of the 6 M residue, mainly representing pectin. In tomato and strawberry alkali residues, glucanases were not able to release pectin populations. The ability of glucanases to release pectin populations suggests that the carrot cell wall contains unique, covalent interactions between pectin and cellulose.

Structural Heteropolysaccharide Adhesion to the Glycocalyx of Visceral Mesothelium

Bioadhesives are biopolymers with potential applications in wound healing, drug delivery, and tissue engineering. Pectin, a plant-based heteropolysaccharide, has recently demonstrated potential as a mucoadhesive in the gut. Since mucoadhesion is a process likely involving the interpenetration of the pectin polymer with mucin chains, we hypothesized that pectin may also be effective at targeting the glycocalyx of the visceral mesothelium. To explore the potential role of pectin as a mesothelial bioadhesive, we studied the interaction of various pectin formulations with the mesothelium of the lung, liver, bowel, and heart. Tensile strength, peel strength, and shear resistance of the bioadhesive-mesothelial interaction were measured by load/displacement measurements. In both high-methoxyl pectins (HMP) and low-methoxyl pectins, bioadhesion was greatest with an equal weight % formulation with carboxymethylcellulose (CMC). The tensile strength of the high-methoxyl pectin was consistently greater than low-methoxyl or amidated low-methoxyl formulations (p < 0.05). Consistent with a mechanism of polymer-glycocalyx interpenetration, the HMP adhesion to tissue mesothelium was reversed with hydration and limited by enzyme treatment (hyaluronidase, pronase, and neuraminidase). Peel and shear forces applied to the lung/pectin adhesion resulted in a near-interface structural failure and the efficient isolation of intact en face pleural mesothelium. These data indicate that HMP, in an equal weight % mixture with CMC, is a promising mesothelial bioadhesive for use in experimental and therapeutic applications.

Pectic polysaccharides of the fresh plum Prunus domestica L. isolated with a simulated gastric fluid and their anti-inflammatory and antioxidant activities

A pectic polysaccharide, designated as PD, was extracted from fresh plums (Prunus domestica L.) with a simulated gastric fluid. Galacturonan, which was partially substituted with methyl and O-acetyl ester groups, and rhamnogalacturonan were the main constituents of the linear regions of the sugar chains of PD. The ramified region contained mainly 1,4-linked β-d-galactopyranose residues and, to a lesser extent, 1,5-linked α-l-arabinofuranose residues. The separation of PD, by DEAE-cellulose column chromatography, yielded two pectic fractions: PD-1 and PD-2, eluted with 0.1 and 0.2 M NaCl, respectively. Enzymatic digestion of PD with 1,4-α-d-polygalacturonase yielded the fraction PD-E. The parent pectin PD and the PD-1 fraction were found to diminish the adhesion of peritoneal leukocytes at the concentrations of 0.05-1.0mg/ml. However, the PD-E fraction failed to have an effect on cell adhesion at the concentrations of 0.05-0.1mg/ml. PD, PD-1 and PD-E were found to inhibit the production of superoxide anion radicals by reducing xanthine oxidase activity by 38%, 97% and 47%, respectively. Therefore, the PD-1 fraction appeared to be an active fragment of pectic macromolecule isolated from fresh plum with a simulated gastric fluid.

Pectin/carboxymethyl cellulose/microfibrillated cellulose composite scaffolds for tissue engineering

Highly porous three-dimensional scaffolds made of biopolymers are of great interest in tissue engineering applications. A novel scaffold composed of pectin, carboxymethyl cellulose (CMC) and microfibrillated cellulose (MFC) were synthesised using lyophilisation technique. The optimised scaffold with 0.1% MFC, C(0.1%), showed highest compression modulus (~3.987 MPa) and glass transition temperature (~103 °C). The pore size for the control scaffold, C(0%), was in the range of 30-300 μm while it was significantly reduced to 10-250 μm in case of C(0.1%). Using micro computed tomography, the porosity of C(0.1%) was estimated to be 88%. C(0.1%) showed excellent thermal stability and lower degradation rate compared to C(0%). The prepared samples were also characterised using XRD and FTIR. C(0.1%) showed controlled water uptake ability and in vitro degradation in PBS. It exhibited highest cell viability on NIH3T3 fibroblast cell line. These results suggest that these biocompatible composite scaffolds can be used for tissue engineering applications.

Differentiation of isomeric pentose disaccharides by electrospray ionization tandem mass spectrometry and discriminant analysis

RATIONALE

The structural characterization of unknown oligosaccharides remains a big challenge since a large number of isomeric structures are possible even for disaccharides. In this work, electrospray ionization collision-induced dissociation tandem mass spectrometry (ESI-CID-MS/MS) was used for the differentiation of isomeric pentose disaccharides, α-(1 → 5)-L-arabinobiose (Ara(2)) and β-(1 → 4)-D-xylobiose (Xyl(2)).

METHODS

ESI-MS/MS spectra of [M + Li](+) and [M + Na](+) ions of Ara(2) and Xyl(2), as well as these precursor ions of (18)O-labelled disaccharides, were acquired using two mass spectrometers equipped with different analyzers: LIT (linear ion trap) and Q-TOF (quadrupole time-of-flight).

RESULTS

Product ions observed in MS/MS spectra arise from the cleavage at the nonreducing side of the glycosidic bond (Y(1)(+)) and from cross-ring cleavages (0,1)A(2)(+), (0,2)A(2)(+), and (0,3)A(2)(+) at the reducing residue. Statistically significant differences were observed between the relative abundance of specific product ions, when comparing both disaccharides. These differences allowed discriminant models to be built and to propose a criterion using the relative abundances of selected ions capable of discriminating between the isomers for both adduct ions and spectrometers.

CONCLUSIONS

Isomeric pentose disaccharides can be distinguished based on the fragmentation of both [M + Li](+) and [M + Na](+) ions and using different mass spectrometers. However, LIT instrument has a better discriminant power.