Influence of Pectin as a green polymer electrolyte on the transport properties of Chitosan-Pectin membranes

Controlled Sr(ii) ion release from in situ crosslinking electroactive hydrogels with potential for the treatment of infections

The development of electrochemical stimuli-responsive drug delivery systems is of both academic and industrial interest due to the ease with which it is possible to trigger payload release, providing drug delivery in a controllable manner. Herein, the preparation of in situ forming hydrogels including electroactive polypyrrole nanoparticles (PPy-NPs) where Sr2+ ions are electrochemically loaded for electrically triggered release of Sr2+ ions is reported. The hydrogels were characterized by a variety of techniques including Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), X-ray diffraction (XRD), cyclic voltammetry (CV), etc. The cytocompatibility towards human mesenchymal stem cells (MSCs) and fibroblasts were also studied. The Sr2+ ion loaded PEC-ALD/CS/PPy-NPs hydrogel showed no significant cytotoxicity towards human mesenchymal stem cells (MSCs) and fibroblasts. Sr2+ ions were electrochemically loaded and released from the electroactive hydrogels, and the application of an electrical stimulus enhanced the release of Sr2+ ions from gels by ca. 2-4 fold relative to the passive release control experiment. The antibacterial activity of Sr2+ ions against E. coli and S. aureus was demonstrated in vitro. Although these prototypical examples of Sr2+ loaded electroactive gels don't release sufficient Sr2+ ions to show antibacterial activity against E. coli and S. aureus, we believe future iterations with optimised physical properties of the gels will be capable of doing so.

Utilization of marine and agro-waste materials as an economical and active food packaging: Antimicrobial, mechanical and biodegradation studies of O-Carboxymethyl chitosan/pectin/neem composite films

The present work deals with the eco-friendly preparation of highly degradable food packaging films consisting of O-CMC (O-Carboxymethyl Chitosan) and pectin, incorporated with neem (Azadirachta indica) leaves powder and extract. This study aimed to investigate the tensile properties, antimicrobial activity, biodegradability, and thermal behavior of the composite films. The results of tensile strength and elongation at break, showed that the incorporation of neem leaves powder improved the tensile properties (7.11 MPa) of the composite films compared to the neat O-CMC and pectin films (3.02 MPa). The antimicrobial activity of the films was evaluated against a panel of microorganisms including both gram-positive and gram-negative bacteria as well as fungi. The composite films exhibited excellent antimicrobial activity with a zone of inhibition (12-17.6 mm) against the tested microorganisms. The opacity of the composite films ranges from 1.14 to 4.40 mm-1 and the addition of fiber causes a decrease in opacity value. Biodegradability studies were conducted by Soil burial method and the films demonstrated complete biodegradability within 75 days. The results of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) of composite films show that they are thermally stable and might be used in food packaging.

Synthesis, Characterization, and Proton Conductivity of Muconic Acid-Based Polyamides Bearing Sulfonated Moieties

Most commercially available polymers are synthesized from compounds derived from petroleum, a finite resource. Because of this, there is a growing interest in the synthesis of new polymeric materials using renewable monomers. Following this concept, this work reports on the use of muconic acid as a renewable source for the development of new polyamides that can be used as proton-exchange membranes. Muconic acid was used as a comonomer in polycondensation reactions with 4,4'-(hexafluoroisopropylidene)bis(p-phenyleneoxy)dianiline, 2,5-diaminobencensulfonic acid, and 4,4'-diamino-2,2'-stilbenedisulfonic acid as comonomers in the synthesis of two new series of partially renewable aromatic-aliphatic polyamides, in which the degree of sulfonation was varied. Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (1H, 13C, and 19F-NMR) techniques were used to confirm the chemical structures of the new polyamides. It was also observed that the degree of sulfonation was proportional to the molar ratio of the diamines in the feed. Subsequently, membranes were prepared by casting, and a complete characterization was conducted to determine their decomposition temperature (Td), glass transition temperature (Tg), density (ρ), and other physical properties. In addition, water uptake (Wu), ion-exchange capacity (IEC), and proton conductivity (σp) were determined for these membranes. Electrochemical impedance spectroscopy (EIS) was used to determine the conductivity of the membranes. MUFASA34 exhibited a σp value equal to 9.89 mS·cm-1, being the highest conductivity of all the membranes synthesized in this study.

Green and Sustainable Membranes: A review

Membranes are ubiquitous tools for modern water treatment technology that critically eliminate hazardous materials such as organic, inorganic, heavy metals, and biomedical pollutants. Nowadays, nano-membranes are of particular interest for myriad applications such as water treatment, desalination, ion exchange, ion concentration control, and several kinds of biomedical applications. However, this state-of-the-art technology suffers from some drawbacks, e.g., toxicity and fouling of contaminants, which makes the synthesis of green and sustainable membranes indeed safety-threatening. Typically, sustainability, non-toxicity, performance optimization, and commercialization are concerns centered on manufacturing green synthesized membranes. Thus, critical issues related to toxicity, biosafety, and mechanistic aspects of green-synthesized nano-membranes have to be systematically and comprehensively reviewed and discussed. Herein we evaluate various aspects of green nano-membranes in terms of their synthesis, characterization, recycling, and commercialization aspects. Nanomaterials intended for nano-membrane development are classified in view of their chemistry/synthesis, advantages, and limitations. Indeed, attaining prominent adsorption capacity and selectivity in green-synthesized nano-membranes requires multi-objective optimization of a number of materials and manufacturing parameters. In addition, the efficacy and removal performance of green nano-membranes are analyzed theoretically and experimentally to provide researchers and manufacturers with a comprehensive image of green nano-membrane efficiency under real environmental conditions.

Magnetically responsive chitosan-pectin films incorporating Fe3O4 nanoparticles with enhanced antimicrobial activity

Chitosan-pectin films with iron oxide (Fe₃O₄) magnetic nanoparticles were prepared by solution casting in order to produce biopolymer based magnetically active materials. Infrared (FTIR) spectra indicated physical interactions between the matrix and nanoparticles, corroborated by differential scanning calorimetry (DSC) results. In addition, thermal characterization suggested that the interactions between chitosan, pectin and the nanoparticles resulted in a less compact structure, influencing the film mechanical properties. Regarding vibrating-sample magnetometry (VSM) and electrical analysis, chitosan-pectin films with Fe₃O₄ nanoparticles showed ferrimagnetic behavior, with an increase of the dielectric constant as the nanoparticle concentration increased. Furthermore, films displayed enhanced antimicrobial activity against Escherichia coli (Gram-negative) and Staphylococcus epidermidis (Gram-positive) bacteria. Therefore, chitosan-pectin films with Fe₃O₄ magnetic nanoparticles provide promising results for active and intelligent food packaging applications.

Eco-friendly pectin polymer film-based triboelectric nanogenerator for energy scavenging

Inspired by the desire to solve the energy-related issues in remote sensing applications, internet of things, wireless autonomous devices, and self-powered portable electronic devices, triboelectric nanogenerators (TENGs) have been highly promoted. However, for use in the specified applications, especially in wearable and biomedical devices, environmental-friendly materials are required. Herein, an eco-friendly pectin polymer is used as a positive triboelectric material to fabricate a TENG with excellent output performance. Working in conjunction with a polyimide, the polyimide and microarchitected pectin (MA@pectin) polymer film-based TENG (PP-TENG) generated open circuit voltage (V_OC), short circuit current (I_SC), and charge density (Q_SC) of ∼300 V, 14 μA, and 70 μC cm^-2, respectively, exhibiting remarkable enhancement compared to the TENG based on polyimide/pristine pectin polymer (V_OC, I_SC, and Q_SC of 170 V, 7.6 μA, and 47 μC cm^-2, respectively) under similar operating conditions. The output performance of the PP-TENG is particularly reliant on the pectin concentration, indicating an optimum concentration of 9 wt%. The improved performance of the PP-TENG was systematically analyzed and explained in terms of pectin concentration, dielectric constant, and surface roughness. Furthermore, the PP-TENG can power portable electronic devices and light-emitting diodes to prove the capability of the TENG in practical applications. The fabricated PP-TENG is anticipated to be a sustainable energy harvester via a low-cost and facile approach.

Utilization of mesoporous phosphotungstic acid in nanocellulose membranes for direct methanol fuel cells

Nanocellulose (NC) composite membranes containing novel ternary materials including NC, imidazole (Im), and mesoporous phosphotungstic acid (m-PTA) were successfully fabricated by a phase inversion method. The single-particle size of NC was 88.79 nm with a spherical form. A m-PTA filler with a mesopore size of 4.89 nm was also successfully synthesized by a self-assembly method. Moreover, the fabricated membrane NC/Im/m-PTA-5 exhibited the best performances towards its proton conductivity and methanol permeability at 31.88 mS cm⁻¹ and 1.74 × 10⁻⁶ cm² s⁻¹, respectively. The membrane selectivity was 1.83 × 10⁴ S cm⁻³.

A NC/Im/m-PTA membrane was fabricated for direct methanol fuel cell applications.

Natural carbohydrate-based thermosensitive chitosan/pectin adsorbent for removal of Pb(II) from aqueous solutions

Biodegradable and eco-friendly adsorbents composed of natural carbohydrates have been used to replace carbon-based materials. This study presents a natural carbohydrate-based chitosan/pectin (CS/Pec) hydrogel adsorbent to remove Pb(II) from aqueous solutions. The physical CS/Pec hydrogel was prepared by blending aqueous CS and Pec solutions at 65 °C, preventing the use of toxic chemistries (crosslinking agents). The thermosensitive CS/Pec hydrogel was quickly created by cooling CS/Pec blend at room temperature. The used strategy created stable CS/Pec hydrogel against disintegration and water dissolution. The as-prepared hydrogel was characterized by infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The adsorbent had 1.688 mmol -COO^- for each gram. These ionized sites bind Pb(II) ions, promoting their adsorption. The adsorption kinetic and equilibrium studies indicated that the Elovich and pseudo-second-order models adjusted well to the experimental data, respectively. The maximum removal capacities (q_m) predicted by the Langmuir and Sips isotherms achieved 108.2 and 97.55 mg/g at 0.83 g/L adsorbent dosage (pH 4.0). The hydrogel/Pb(II) pair was characterized by scanning electron microscopy (SEM), X-ray dispersive energy (EDS), and differential scanning calorimetry (DSC). The chemisorption seems to play an essential role in the Pb(II) adsorption. Therefore, the adsorbent was not recovered, showing low potential for reusability.

Effect of Curcumin Addition on the Properties of Biodegradable Pectin/Chitosan Films

A pectin/chitosan matrix-loaded curcumin film (PCCF) with a deep eutectic solvent (DES) as the solvent and plasticizer was prepared in this study. Different quantities of curcumin (identified as PCCF-0, PCCF-1, PCCF-2. PCCF-3) were loaded on the pectin/chitosan film in order to evaluate their effects on the film properties. Results showed that curcumin could interact with the pectin/chitosan matrix and form a complex three-dimensional network structure. PCCF could promote the thickness, tensile strength, thermal properties, antioxidant and antiseptic capacities, but deteriorate the light transmission and elongation at the same time. The addition of curcumin would change the color of the film, without significantly affecting the moisture content. The tensile strength of PCCF-3 reached the maximum value of 3.75 MPa, while the elongation decreased to 10%. Meanwhile, the water-resistance properties of PCCF-3 were significantly promoted by 8.6% compared with that of PCCF-0. Furthermore, PCCF showed remarkable sustained antioxidant activities in a dose-dependent manner. PCCF-3 could inhibit DPPH and ABTS free radicals by 58.66% and 29.07%, respectively. It also showed antiseptic capacity on fresh pork during storage. Therefore, curcumin addition could improve the barrier, mechanical, antioxidant and antiseptic properties of the polysaccharide-based film and PCCF has the potential to be used as a new kind of food packaging material in the food industry.

Synthesis and Characterization of Partially Renewable Oleic Acid-Based Ionomers for Proton Exchange Membranes

The future availability of synthetic polymers is compromised due to the continuous depletion of fossil reserves; thus, the quest for sustainable and eco-friendly specialty polymers is of the utmost importance to ensure our lifestyle. In this regard, this study reports on the use of oleic acid as a renewable source to develop new ionomers intended for proton exchange membranes. Firstly, the cross-metathesis of oleic acid was conducted to yield a renewable and unsaturated long-chain aliphatic dicarboxylic acid, which was further subjected to polycondensation reactions with two aromatic diamines, 4,4′-(hexafluoroisopropylidene)bis(p-phenyleneoxy)dianiline and 4,4′-diamino-2,2′-stilbenedisulfonic acid, as comonomers for the synthesis of a series of partially renewable aromatic-aliphatic polyamides with an increasing degree of sulfonation (DS). The polymer chemical structures were confirmed by Fourier transform infrared (FTIR) and nuclear magnetic resonance (¹H, ¹³C, and ¹⁹F NMR) spectroscopy, which revealed that the DS was effectively tailored by adjusting the feed molar ratio of the diamines. Next, we performed a study involving the ion exchange capacity, the water uptake, and the proton conductivity in membranes prepared from these partially renewable long-chain polyamides, along with a thorough characterization of the thermomechanical and physical properties. The highest value of the proton conductivity determined by electrochemical impedance spectroscopy (EIS) was found to be 1.55 mS cm⁻¹ at 30 °C after activation of the polymer membrane.

Improving the physicochemical stability and functionality of nanoliposome using green polymer for the delivery of pelargonidin-3-O-glucoside

This study aimed to improve the physicochemical stability of nanoliposome (NL) with enhanced functionality for the delivery of Pelargonidin-3-O-glucoside (P3G) using biopolymers, i.e. chitosan (CH) and pectin (P). In this study, we successfully developed stabilized liposomal carriers, i.e. CH-conjugated NL (CH-NL) and P-conjugated CH-NL (P-CH-NL) using an optimum concentration of CH (0.6 wt%) and P (0.5 wt%). Results revealed that P-CH-NL had better physical stability to salt and pH with maximum P3G retention (>97%) under oxidative, thermal, and UV conditions. Nanoliposomes were more stable under refrigerated-storage and ensured high P3G retention (>96%). In vitro mucoadhesion study revealed that CH-NL had better mucin adsorption efficiency (59.72%) followed by P-CH-NL and NL. Furthermore, CH-NL and P-CH-NL alternatively had better stability to serum than NL. Taken together, the stabilization of nanoliposome using chitosan and pectin can be a promising approach for the delivery of hydrophilic compounds in association with enhanced stability and functionality.

Bio-Based Polymer Electrolytes for Electrochemical Devices: Insight into the Ionic Conductivity Performance

With the continuing efforts to explore alternatives to petrochemical-based polymers and the escalating demand to minimize environmental impact, bio-based polymers have gained a massive amount of attention over the last few decades. The potential uses of these bio-based polymers are varied, from household goods to high end and advanced applications. To some extent, they can solve the depletion and sustainability issues of conventional polymers. As such, this article reviews the trends and developments of bio-based polymers for the preparation of polymer electrolytes that are intended for use in electrochemical device applications. A range of bio-based polymers are presented by focusing on the source, the general method of preparation, and the properties of the polymer electrolyte system, specifically with reference to the ionic conductivity. Some major applications of bio-based polymer electrolytes are discussed. This review examines the past studies and future prospects of these materials in the polymer electrolyte field.

Characterization of a new composite membrane for point of need paper-based micro-scale microbial fuel cell analytical devices

Microbial fuel cells (MFCs) can evolve in a viable technology if environmentally sound materials are developed and became available at low cost for these devices. This is especially important not only for the designing of large wastewater treatment systems, but also for the fabrication of low-cost, single-use devices. In this work we synthesized membranes by a simple procedure involving easily-biodegradable and economic materials such as poly (vinyl alcohol) (PVA), chitosan (CS) and the composite PVA:CS. Membranes were chemical and physically characterized and compared to Nafion^®. Performance was studied using the membrane as separator in a typical H-Type MFCs showing that PVA:CS membrane outperform Nafion^® 4 times (power production) while being 75 times more economic. We found that performance in MFC depends over interactions among several membrane characteristics such as oxygen permeability and ion conductivity. Moreover, we design a paper-based micro-scale MFC, which was used as a toxicity assay using 16 μL samples containing formaldehyde as a model toxicant. The PVA:CS membrane presented here can offer low environmental impact and become a very interesting option for point of need single-use analytical devices, especially in low-income countries where burning is used as disposal method, and toxic fluoride fumes (from Nafion^®) can be released to the environment.

Interlayer-free Silica Pectin Membrane for Wetland Saline Water via Pervaporation

Wetland in South Kalimantan is one of surface water sources to provide clean water. However, seawater intrusion has spread into the wetland aquifer and reduce the quality of water. Silica-pectin membrane is a promising technology for desalination. The membranes were tested for desalination by pervaporation at room temperature (~25 °C). During pervaporation process, the water contacts to membrane and the separation is started to occurs as vapour phase by maintaining vacuum pressure (~1 bar). The permeate was collected in the cold trap after condensed using nitrogen liquid. The purpose of this research was to investigate the performance of interlayer-free silica pectin membrane for wetland saline water. Experimental results shows the fluxes of membrane are 0.35 and 0.19 kg.m-2 h-1 ( pectin 0%wt); 0.23 and 0.16 kg.m-2 h-1 (pectin 0.1%wt); 0.58 and 3.63 kg.m-2 h-1 (pectin 0.5%wt); 3.40 and 0.12 kg.m-2 h-1 (pectin 2.5%wt) calcined at 300 and 400 °C, respectively. Natural organic matter (NOM) and salt concentration in wetland saline water can reduce the fluxes up to (~98%). Nevertheless, overall salt rejection of membranes achieved >99%. It was found that low calcination gives better performance at high pectin concentration. While pectin concentration was limited at high calcination.

Biocompatible chitosan-pectin polyelectrolyte complex for simultaneous electrochemical determination of metronidazole and metribuzin

Development of novel biocompatible sensor material suitable for modest, cost-effective, and rapid practical application is a demanding research interest in the field of electroanalytical chemistry. In this context, for the first time, we utilized biocompatible chitosan-pectin biopolyelectrolyte (CS-PC BPE) complex for the simultaneous electroreduction of an important antibiotic drug (metronidazole-MNZ) and herbicide (metribuzin-MTZ). This sensor reveals an attractive welfares such as simplicity, biocompatibility, and low production cost. Under optimized experimental conditions, the electroanalytical investigation confirmed that CS-PC BPE modified glassy carbon electrode (CS-PC BPE/GCE) was found to sense MNZ and MTZ in the nanomolar range. Moreover, as-prepared CS-PC BPE/GCE exhibited prominent selectivity, stability, and reproducibility. Additionally, the possible MNZ and MTZ sensing mechanism of CS-PC BPE/GCE have been discussed in detail. Lastly, real sample analysis was also carried out and revealed from several investigations that the CS-PC BPE/GCE is a good electrochemical sensor system for the detection of targeted analytes.

Engineering pectin-based hollow nanocapsules for delivery of anticancer drug

Multifunctional capsules have great applications in biomedical fields. In this study, novel polysaccharide-based nanocapsules were prepared via a layer-by-layer technique using silica as the templates. The shell was constructed based on the electrostatic interactions between pectin and chitosan. The pectin-chitosan nanocapsules ((Pec/Cs)₃Pec) could keep good colloidal stability within 96h in PBS solution and 48h in BSA solution. Meanwhile, the nanocapsules exhibited a high drug loading and pH-sensitive release property for doxorubicin hydrochloride. Moreover, (Pec/Cs)₃Pec nanocapsules had no cytotoxicity to both human hepatocellular carcinoma cells (HepG2 cells) and mouse fibroblast cells (L929 cells). More importantly, (Pec/Cs)₃Pec nanocapsules could be more easily uptaken by HepG2 cells when compared with L929 cells. In vitro anticancer activity tests indicated the carriers could effectively kill HepG2 cells. Overall, (Pec/Cs)₃Pec nanocapsules have great potential as a novel anticancer drug carrier as a result of their pH-sensitivity, good colloidal stability and anticancer activity.