Wheat straw hemicelluloses added with cellulose nanocrystals and citric acid. Effect on film physical properties

Innovative food-upcycling solutions: Comparative analysis of edible films from kimchi-extracted cellulose, sorbitol, and citric acid for food packaging applications

In this study, kimchi-extracted cellulose was utilized to fabricate edible films using a hot synthetic approach, followed by solvent casting, and employing sorbitol and citric acid as the plasticizer and crosslinker, respectively. The chemical, optical, physical, and thermal properties of these films were explored to provide a comparative assessment of their suitability for various packaging applications. Chemical analyses confirmed that the kimchi-extracted cellulose comprised cellulose Iβ and amorphous cellulose and did not contain any impurities. Optical analyses revealed that kimchi-extracted cellulose-containing films exhibited better-dispersed surfaces than films fabricated from commercial cellulose. Physical property analyses indicated their hydrophilic characteristics with contact angles <20°. In the thermal analysis, similar Tg results confirmed the comparable thermal stability between films containing commercial microcrystalline cellulose-containing films and kimchi-extracted cellulose-containing films. Edible films produced from kimchi-extracted cellulose through food-upcycling approaches are therefore promising for applications as packaging materials.

Valorization of Grain and Oil By-Products with Special Focus on Hemicellulose Modification

Hemicellulose is one of the most important natural polysaccharides in nature. Hemicellulose from different sources varies in chemical composition and structure, which in turn affects the modification effects and industrial applications. Grain and oil by-products (GOBPs) are important raw materials for hemicellulose. This article reviews the modification methods of hemicellulose in GOBPs. The effects of chemical and physical modification methods on the properties of GOBP hemicellulose biomaterials are evaluated. The potential applications of modified GOBP hemicellulose are discussed, including its use in film production, hydrogel formation, three-dimensional (3D) printing materials, and adsorbents for environmental remediation. The limitations and future recommendations are also proposed to provide theoretical foundations and technical support for the efficient utilization of these by-products.

Impact of defibrillation technique on the rheological, thermo-mechanical, and nutritional properties of nanosuspensions produced from multiple fractions of pinhão seed (Araucaria angustifolia (Bertol.) Kuntze)

This work aimed to evaluate the influence of the mechanical defibrillation technique on the pinhão nanosuspensions production obtained from the whole pinhão, its coat, and almond. The nanosuspensions were characterized concerning their composition, morphology, thermal stability, rheological behavior, compound profiling, and cytotoxicity. The results revealed a significant fiber content in pinhão coat nanosuspension (63.12 ± 0.52 %) and non-fiber carbohydrates in whole pinhão (59.00 ± 0.13 %) and almond (74.39 ± 0.23 %) nanosuspensions. The defibrillation process led to micro/nano-sized fibers in pinhão coat nanosuspensions and small-size starch granules in almond nanosuspensions. The nanosuspensions containing pinhão coat exhibited a gel-like behavior, while almond nanosuspensions displayed liquid-like characteristics. Pinhão coat nanosuspensions presented a significant content of flavonoids and phytosterols, whereas almond-based nanosuspensions contained substantial sugar amounts. No cytotoxicity was observed at the concentrations evaluated. These findings demonstrated that the defibrillation technique impacted the properties of pinhão constituents, allowing their application in new product development.

Label free electrochemical sensors for Pb(II) detection based on hemicellulose extracted from Opuntia Ficus Indica cactus

We aim to develop an electrochemical sensor for a divalent metal ion (lead II), a highly toxic water contaminant. We explore a sensor formed with a hemicellulose polysaccharide extracted from the Opuntia Ficus Indica cactus associated with agarose as a sensitive layer deposited on a gold electrode. This sensor combines the functional groups of hemicellulose that could form a complex with metal ions and agarose with gelling properties to form a stable membrane. The sensor demonstrated a loading ability of Pb2+, with higher affinity compared to other metal ions such as Hg2+, Ni2+, and Cu2+, thanks to the chemical structure of hemicellulose. The detection was measured by square wave voltammetry based on a well-defined redox peak of the metal ions. The sensor shows high sensitivity towards Pb2+ with a detection limit of 1.3 fM. The application in river and sea water using the standard addition method for lead detection was studied.

Development of Films from Spent Coffee Grounds' Polysaccharides Crosslinked with Calcium Ions and 1,4-Phenylenediboronic Acid: A Comparative Analysis of Film Properties and Biodegradability

Most polymeric materials are synthetic and derived from petroleum, hence they accumulate in landfills or the ocean, and recent studies have focused on alternatives to replace them with biodegradable materials from renewable sources. Biodegradable wastes from food and agroindustry, such as spent coffee grounds (SCGs), are annually discarded on a large scale and are rich in organic compounds, such as polysaccharides, that could be used as precursors to produce films. Around 6.5 million tons of SCGs are discarded every year, generating an environmental problem around the world. Therefore, it was the aim of this work to develop films from the SCGs polysaccharide fraction, which is comprised of cellulose, galactomannans and arabinogalactans. Two types of crosslinking were performed: the first forming coordination bonds of calcium ions with polysaccharides; and the second through covalent bonds with 1,4-phenylenediboronic acid (PDBA). The films with Ca²⁺ ions exhibited a greater barrier to water vapor with a reduction of 44% of water permeability vapor and 26% greater tensile strength than the control film (without crosslinkers). Films crosslinked with PDBA presented 55-81% higher moisture contents, 85-125% greater permeability to water vapor and 67-150% larger elongations at break than the films with Ca²⁺ ions. Film biodegradability was demonstrated to be affected by the crosslinking density, with the higher the crosslinking density, the longer the time for the film to fully biodegrade. The results are promising and suggest that future research should focus on enhancing the properties of these films to expand the range of possible applications.

Insight into the Latest Medical Applications of Nanocellulose

Nanocelluloses (NCs) are appealing nanomaterials that have experienced rapid development in recent years, with great potential in the biomedical field. This trend aligns with the increasing demand for sustainable materials, which will contribute both to an improvement in wellbeing and an extension of human life, and with the demand to keep up with advances in medical technology. In recent years, due to the diversity of their physical and biological properties and the possibility of tuning them according to the desired goal, these nanomaterials represent a point of maximum interest in the medical field. Applications such as tissue engineering, drug delivery, wound dressing, medical implants or those in cardiovascular health are some of the applications in which NCs have been successfully used. This review presents insight into the latest medical applications of NCs, in the forms of cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs) and bacterial nanocellulose (BNC), with an emphasis on the domains that have recently experienced remarkable growth, namely wound dressing, tissue engineering and drug delivery. In order to highlight only the most recent achievements, the presented information is focused on studies from the last 3 years. Approaches to the preparation of NCs are discussed either by top-down (chemical or mechanical degradation) or by bottom-up (biosynthesis) techniques, along with their morphological characterization and unique properties, such as mechanical and biological properties. Finally, the main challenges, limitations and future research directions of NCs are identified in a sustained effort to identify their effective use in biomedical fields.

Renewable Poly(Lactic Acid)Lignocellulose Biocomposites for the Enhancement of the Water Retention Capacity of the Soil

This manuscript details the preparation and characterization of a renewable biocomposite material intended as a soil conditioner based on low-molecular-weight poly(lactic acid) (PLA) and residual biomass (wheat straw and wood sawdust). The swelling properties and biodegradability of the PLA-lignocellulose composite under environmental conditions were evaluated as indicators of its potential for applications in soil. Its mechanical and structural properties were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). Results showed that the incorporation of lignocellulose waste material into PLA increased the swelling ratio of the biocomposite by up to 300%. The application of the biocomposite of 2 wt% in soil enhanced its capacity for water retention by 10%. In addition, the cross-linked structure of the material proved to be capable of swelling and deswelling repeatedly, indicating its good reusability. Incorporating lignocellulose waste in the PLA enhanced its stability in the soil environment. After 50 days of the experiment, almost 50% of the sample had degraded in the soil.

Effect of Heating and Citric Acid on the Performance of Cellulose Nanocrystal Thin Films

Cellulose nanocrystals (CNCs) were extracted from bleached cotton by sulfuric acid hydrolysis. Thin films were prepared from the aqueous suspension of CNCs by casting and evaporation with 15% glycerol as a plasticizer. Our research aimed to create stable films resistant to water. The structure and the interactions of the films were modified by short (10 min) heating at different temperatures (100, 140, and 160 °C) and by adding different amounts of citric acid (0, 10, 20, and 30%). Various analytical methods were used to determine the structure, surface properties, and mechanical properties. The interaction of composite films with water and water vapor was also investigated. Heat treatment did not significantly affect the film properties. Citric acid, without heat treatment, acted as a plasticizer. It promoted the disintegration of films in water, increased water vapor sorption, and reduced tensile strength, resulting in flexible and easy-to-handle films. The combination of heat treatment and citric acid resulted in stable liquid-water-resistant films with excellent mechanical properties. A minimum heating temperature of 120 °C and a citric acid concentration of 20% were required to obtain a stable CNC film structure resistant to liquid water.

Effects of citric acid crosslinking on the structure and properties of ovotransferrin and chitosan composite films

In this study, ovotransferrin/chitosan (OVT/CS) composite films cross-linked by citric acid (CA) were prepared and the effects of CA cross-linking on the structure and physicochemical properties of the composite films were investigated. The cross-linking degree measured by 2,4,6-trinitrobenzenesulfonic acid (TNBS) method confirmed that CA was cross-linked with the matrix, and Fourier transform infrared spectroscopy confirmed that more hydrogen bonds and electrostatic interactions were formed between CA and the matrix. Differential scanning calorimetry, X-ray diffraction and Scanning electron microscope images revealed the compatibility between substances. The synergistic inhibition between the matrix results in a significantly higher antibacterial activity of the composite film than the pure film. Compared with uncross-linked films, the mechanical properties, barrier properties and water resistance of the cross-linked films were significantly improved. When the concentration of CA was 5 wt% (W/W, on a dry basis of the weight of OVT and CS), the most significant improvement in film performance was obtained. The tensile strength of the film increased from 32.05 MPa without cross-linking to 61.99 MPa and the swelling degree decreased from 51.5 % to 24.23 %. The observed phenomena suggest that cross-linking OVT and CS with CA can obtain functional edible films with improved properties.

Research Progress in Hemicellulose-Based Nanocomposite Film as Food Packaging

As the main component of agricultural and forestry biomass, hemicellulose has the advantages of having an abundant source, biodegradability, nontoxicity and good biocompatibility. Its application in food packaging has thus become the focus of efficient utilization of biomass resources. However, due to its special molecular structure and physical and chemical characteristics, the mechanical properties and barrier properties of hemicellulose films are not sufficient, and modification for performance enhancement is still a challenge. In the field of food packaging materials preparation, modification of hemicellulose through blending with nanofibers or nanoparticles, both inorganic and organic, has attracted research attention because this approach offers the advantages of efficient improvement in the expected properties and better cost efficiency. In this paper, the composition of hemicellulose, the classification of nanofillers and the research status of hemicellulose-based nanocomposite films are reviewed. The research progress in modification of hemicellulose by using layered silicate, inorganic nanoparticles and organic nanoparticles in food packaging is described. Challenges and outlook of research in hemicellulose-based nanocomposite film in food packaging is discussed.

Influence of preparation techniques of cellulose II nanocrystals as reinforcement for tannery solid waste-based gelatin composite films

Tannery waste-based gelatin composite film reinforced with cellulose II nanocrystal (CNC II) extracted from wet wipes using three different hydrolysis techniques is explored for its functional properties and possible utilization as a biodegradable packaging material. CNC II isolated using hydrogen peroxide (PCNC), citric acid (CCNC), and hydrochloric acid (HCNC) differed in morphological and crystalline character as investigated using DLS, FE-SEM, FTIR, and XRD analysis. The crystallinity of PCNC, CCNC, and HCNC was found to be 81.1%, 75.4%, and 86.1%, respectively. The highly crystalline CNC II (PCNC) incorporation improved mechanical stiffness of rawhide trimming waste-based gelatin films by 50% compared to control gelatin film. Maximum thermal decomposition with Tmax of 329 °C was obtained for gelatin films with PCNC nano-reinforcement. Films with CNC II were structurally stable and sufficiently antibacterial against Gram-positive S. aureus microbial strain. Strong interfacial non-covalent and hydrogen bonding interactions between gelatin and cellulose II nanocrystal have likely enhanced the properties of the composite films. Incorporation of CNC II reduced the surface wettability of the films and nanocomposites absorbed UV radiation as evidenced by transmittance value T280 of 0.19%. Nanocomposite films degraded up to 79.9% of initial mass within 7 days of soil burial. Furthermore, based on the optimized system, single-use packaging application of eggplant seeds has been demonstrated.

Valorization of wheat straw in food packaging: A source of cellulose

Wheat straw (WS) is one of the abundant categories of agricultural waste, which is usually abandoned and burned yearly, thus creating environmental issues. Traditionally, it is used for low-value purposes, mainly in cattle feeding or agricultural mulch, and the rest is burnt or thrown away. WS is a valuable candidate as raw material for being used as reinforcing fibers to fabricate biocomposites. Among existing strategies, one of the potential strategies to utilize such lignocellulosic biomasses includes the extraction of cellulose as a potential candidate in the fabrication of sustainable packaging. Exploring WS as a valuable source of cellulose could be a key strategy for enabling biopolymers in packaging, which relies on developing tailor-made materials from non-food and low-cost resources. In this regard, the valorization of WSs for packaging can add value to these underutilized residues and successfully contribute to the circular economy concept. The review addresses the valorization of WS as a source of cellulose and its nanostructured forms for food packaging applications. The review also discusses cellulose derivatives extraction using conventional or innovative techniques (microwave-assisted extraction, fractionation, mechanical fibrillation, steam-explosion, microfludization, enzymatic hydrolysis, etc.). The different applications of these extracted biopolymers in the packaging are also summarized.

Effect of Loblolly Pine (Pinus taeda L.) Hemicellulose Structure on the Properties of Hemicellulose-Polyvinyl Alcohol Composite Film

Hemicellulose is the second most abundant natural polysaccharide and a promising feedstock for biomaterial synthesis. In the present study, the hemicellulose of loblolly pine was obtained by the alkali extraction-graded ethanol precipitation technique, and the hemicellulose-polyvinyl alcohol (hemicellulose-PVA) composite film was prepared by film casting from water. Results showed that hemicellulose with a low degree of substitution is prone to self-aggregation during film formation, while hemicellulose with high branching has better compatibility with PVA and is easier to form a homogeneous composite film. In addition, the higher molecular weight of hemicellulose facilitates the preparation of hemicellulose-PVA composite film with better mechanical properties. More residual lignin in hemicellulose results in the better UV shielding ability of the composite film. This study provides essential support for the efficient and rational utilization of hemicellulose.

Investigation of the Structural, Thermal, and Physicochemical Properties of Nanocelluloses Extracted From Bamboo Shoot Processing Byproducts

Nanocellulose has gained increasing interest due to its excellent properties and great potential as a functional component or carrier in food and pharmaceutical industries. This study investigated the structural, thermal, and physicochemical properties of nanofibrillated cellulose (NFC) and nanocrystalline cellulose (CNC) extracted from bamboo shoot (Leleba oldhami Nakal) processing byproducts. NFCs were prepared through low concentration acid hydrolysis combined with ultrasonic treatment. CNCs were further isolated from NFCs using sulfuric acid hydrolysis treatment. TEM images showed that NFC and CNC exhibited typical long-chain and needle-like structures, respectively. CNC suspension was stable due to its zeta potential of -34.3 ± 1.23 mV. As expected, both NFC and CNC displayed high crystallinity indexes of 68.51 and 78.87%, and FTIR analysis confirmed the successful removal of lignin and hemicellulose during the treatments. However, the thermogravimetric analysis indicated that sulfuric acid hydrolysis decreased the thermal stability of CNCs. The improved physicochemical properties of NFC and CNC suggested their potential in various applications.

Lignocellulosic Nanocrystals from Sawmill Waste as Biotemplates for Free-Surfactant Synthesis of Photocatalytically Active Porous Silica

This work presents a new approach for more effective valorization of sawmill wastes (Beech and Cedar sawdusts), which were used as new sources for the extraction of lignin-containing and lignin-free cellulose II nanocrystals (L-CNCs and CNCs). It was shown that the properties of the extracted nanocrystals depend on the nature of the used sawdust (softwood or hardwood sawdusts). L-CNCs and CNCs derived from Beech fibers were long and thin and also had a higher crystallinity, compared with those obtained from Cedar fibers. Thanks to their interesting characteristics and their high crystallinity, these nanocrystals have been used without changing their surfaces as template cores for nanostructured hollow silica-free-surfactant synthesis for photocatalysis to degrade methylene blue (MB) dye. The synthesis was performed with a simple and efficient sol-gel method using tetraethyl orthosilicate as the silica precursor followed by calcination at 650 °C. The obtained materials were denoted as B/L-CNC/nanoSiO2, B/CNC/nanoSiO2, C/L-CNC/nanoSiO2, and C/CNC/nanoSiO2, when the used L-CNC and CNC cores are from Beech and Cedar, respectively. By comprehensive analysis, it was demonstrated that the nanostructured silica were quite uniform and had a similar morphology as the templates. Also, the pore sizes were closely related to the dimensions of L-CNC and CNC templates, with high specific surface areas. The photocatalytic degradation of MB dye was about 94, 98, 74, and 81% for B/L-CNC/nanoSiO2, B/CNC/nanoSiO2, C/L-CNC/nanoSiO2, and C/CNC/nanoSiO2, respectively. This study provides a simple route to extract L-CNCs and CNCs as organic templates to prepare nanostructured silica. The different silica structures showed excellent photodegradation of MB.

Impact of Drying Regimes and Different Coating Layers on Carboxymethyl Cellulose Cross-Linked with Citric Acid on Cotton Thread Fibers for Wound Dressing Modification

The oldest preservation techniques used are drying techniques, which are employed to remove moisture and prevent microorganisms’ growths, prolonging a material’s shelf life. This study evaluates the effects of drying methods on carboxymethyl cellulose (CMC) + citric acid (CA) coating layers on cotton threads. For this reason, cotton threads were washed and then coated with different layers of CMC cross-linked with CA, followed by drying using an oven (OD), infrared (IR), and a combination of oven + IR (OIR) drying methods at 65 °C. Our investigations revealed that CMC + CA yields a pliable biopolymer. The differences in drying regimes and coating layers of CMC + CA have a significant effect on the coated cotton thread strength and absorption capability. The study concluded that the IR drying regime is more effective to dry a single-layered cotton thread with a single layer of CMC + CA coating to enhance desirable properties for wound dressing modification.

Production and assessment of the biodegradation and ecotoxicity of xylan- and starch-based bioplastics

Developing novel renewable (and preferably biodegradable) materials has become recurrent due to the growing concerns with environmental impacts of high volumes of plastic waste produced from oil-based sources over the past decades. This study aimed at developing bioplastics from a mixture of starch and xylan in variable ratios, and the combined effect of α-cellulose and holocellulose extracted from sugarcane bagasse added to the process. The disintegration of bioplastics was evaluated in both soil and composting. The ecotoxicity analyses with Saccharomyces cerevisiae, Bacillus subtilis and seeds of Cucumis sativus were conducted after disintegration. All formulations based on 5% (w/v) of total polysaccharides were dried at 30 °C and resulted in homogeneous and non-brittle bioplastics. The composting results showed that all bioplastic formulations disintegrated in 3 days, whereas the 25/75% (xylan/starch, w/w) formulation vanished in soil within 13 days. The ecotoxicity data showed no inhibition of microbial growth after biodegradation, yielding 100% of seed germination. Despite the positive influence of the bioplastic degradation on the root and hypocotyl growth, temporary inhibition of C. sativus tissues exposed to soil washing (10 days of disintegration) was observed. The study demonstrated that xylan/starch bioplastics result in non-ecotoxic biodegradable materials.

A review of trends in the development of bionanocomposites from lignocellulosic and polyacids biomolecules as packing material making alternative: A bibliometric analysis

Contamination caused by the accumulation of petrochemical-based plastics has reached worrying magnitudes and led to the development of biopolymers as an option to mitigate the problem. This work thus presents a bibliometric analysis of all that concerns the development of such bionanocomposite materials, using ScientoPy and SciMAT software to establish associations between the number of published documents, countries, institutions and most relevant topics. The bionanocomposites topic was found to throw up the biggest number of documents associated (2008) with the different types of raw materials and methods used to obtain nanoparticles and their combination with biopolymeric materials, the result known as a "bionancomposite*". Analysis of the documents related to the application for development of packaging materials from biological molecules, carbohydrate polymers, compounds, conjugates, gels, glucans, hydrogels, membranes, mucilage (source unspecified), mucoadhesives, paper, polymers, polysaccharide, saccharides etc, is also presented, emphasizing mechanical, thermal and barrier properties, which, due to the inclusion of nanoparticles mainly from natural sources of cellulose, show increases of up to 30%. The inclusion of nanoparticles, especially those derived from cellulose sources, generally seeks to increase the properties of bionanocomposite materials. Regarding an increase in mechanical properties, specifically tensile strength, inclusions at percentages not exceeding 10 wt% can register increases that exceed 30% were reported.

All-natural and biocompatible cellulose nanocrystals films with tunable supramolecular structure

Herein, nanocomposites films were prepared via the facile casting method by incorporating cellulose nanocrystals (CNCs) with arabinogalactan (AG), galactomannan (GM) or konjac glucomannan (KGM) respectively. The introduced polysaccharides maintained the transparency of CNCs films and promoted the UV blocking properties. In addition, mechanical strength of the nanocomposite films was greatly improved after the combination of polysaccharides. The interactions of hydroxyl-abundant macromolecules, smoother and tighter morphological structures, as well as the disturbed crystal structure were proved to be responsible for the improved properties. Hydrophilic lattice planes of cellulose crystallites were determined to interact with polysaccharides resulting in lower crystallite sizes and crystallinity. The cell culture assay revealed that the films had no cytotoxicity and presented a satisfactory cytocompatibility, because of the polysaccharides from plant cell walls introduced into the films. Therefore, the biocompatible nanocomposites films can be tuned by the addition of polysaccharides, which show great potentials for materials modification in optical, packaging and biomedical fields.

The Food-Materials Nexus: Next Generation Bioplastics and Advanced Materials from Agri-Food Residues

The most recent strategies available for upcycling agri-food losses and waste (FLW) into functional bioplastics and advanced materials are reviewed and the valorization of food residuals are put in perspective, adding to the water-food-energy nexus. Low value or underutilized biomass, biocolloids, water-soluble biopolymers, polymerizable monomers, and nutrients are introduced as feasible building blocks for biotechnological conversion into bioplastics. The latter are demonstrated for their incorporation in multifunctional packaging, biomedical devices, sensors, actuators, and energy conversion and storage devices, contributing to the valorization efforts within the future circular bioeconomy. Strategies are introduced to effectively synthesize, deconstruct and reassemble or engineer FLW-derived monomeric, polymeric, and colloidal building blocks. Multifunctional bioplastics are introduced considering the structural, chemical, physical as well as the accessibility of FLW precursors. Processing techniques are analyzed within the fields of polymer chemistry and physics. The prospects of FLW streams and biomass surplus, considering their availability, interactions with water and thermal stability, are critically discussed in a near-future scenario that is expected to lead to next-generation bioplastics and advanced materials.

Comprehensive Review of Polysaccharide-Based Materials in Edible Packaging: A Sustainable Approach

Edible packaging is a sustainable product and technology that uses one kind of "food" (an edible material) to package another kind of food (a packaged product), and organically integrates food with packaging through ingenious material design. Polysaccharides are a reliable source of edible packaging materials with excellent renewable, biodegradable, and biocompatible properties, as well as antioxidant and antimicrobial activities. Using polysaccharide-based materials effectively reduces the dependence on petroleum resources, decreases the carbon footprint of the "product-packaging" system, and provides a "zero-emission" scheme. To date, they have been commercialized and developed rapidly in the food (e.g., fruits and vegetables, meat, nuts, confectioneries, and delicatessens, etc.) packaging industry. However, compared with petroleum-based polymers and plastics, polysaccharides still have limitations in film-forming, mechanical, barrier, and protective properties. Therefore, they need to be improved by reasonable material modifications (chemical or physical modification). This article comprehensively reviews recent research advances, hot issues, and trends of polysaccharide-based materials in edible packaging. Emphasis is given to fundamental compositions and properties, functional modifications, food-packaging applications, and safety risk assessment of polysaccharides (including cellulose, hemicellulose, starch, chitosan, and polysaccharide gums). Therefore, to provide a reference for the development of modern edible packaging.

Combining 'grafting to' and 'grafting from' to synthesize comb-like NCC-g-PLA as a macromolecular modifying agent of PLA

The surface modification of nano particles is very important in nanotechnology. Grafting from (GF) and grafting to (GT) are two main methods to prepare surface modified nanoparticles like nanocellulose crystalline (NCC) grafted with polylactic acid (PLA) chains. In the GF method, the NCC can get high grafting degree but short side chains to improve its compatibility with the polymer matrix. The GT method can help obtain long side chains to increase the chain entanglements but owns low grafting density. To take the advantage of both methods, a mixed modification method combining GT and GF methods was put forward to synthesize comb-like NCC-g-PLA (NP) as a macromolecular modifying agent of PLA. Firstly, GT Method was used to obtain long side-chain NP to improve chain entanglement. Secondly, the GF method was applied to obtain NP-g-PLA (NPL) and NP-g-PDLA (NPD) with additional short side chains to improve its dispersion and compatibility in the PLA matrix. The products showed an enhanced nucleation effect, the degree of crystallinity (X_c) of PLA composites increased almost four times with only 1 wt% NPD or NPL. What's more, the storage modulus and loss modulus of the composite melts also increased with 1 wt% NPL or NPD. The NPD/PLA shows a higher effect than NPL/PLA owning to stronger interaction originated from the stereocomplex (SC) network of PLA matrix with PDLA short chains in NPD.

Recent Developments and Applications of Hemicellulose From Wheat Straw: A Review

Hemicellulose is an important component of plant cell walls, which is mainly used in biofuels and bioproducts. The hemicellulose extracted from different plant sources and plant locations has different microstructure and molecule. Wheat straw is an important biomass raw material for the extraction of hemicellulose. The aims of this review are to summary the recent developments and various applications of hemicellulose from wheat straw. The microstructure and molecule of hemicellulose extracted by different methods are comparably discussed. The hemicellulose-based derivatives and composites are also reviewed. Special attention was paid to the applications of hemicellulose such as biofuel production, packaging field, and adsorbent. The problems and developing direction were given based on our knowledge. We expect that this review will put forward to the development and high-value applications of hemicellulose from wheat straw.

Infiltration of Proteins in Cholesteric Cellulose Structures

Cellulose nanocrystals (CNCs) can spontaneously self-assemble into chiral nematic (cn) structures, similar to natural cholesteric organizations. The latter display highly dissipative fracture propagation mechanisms given their "brick" (particles) and "mortar" (soft matrix) architecture. Unfortunately, CNCs in liquid media have strong supramolecular interactions with most macromolecules, leading to aggregated suspensions. Herein, we describe a method to prepare nanocomposite materials from chiral nematic CNCs (cn-CNCs) with strongly interacting secondary components. Films of cn-CNCs were infiltrated at various loadings with strongly interacting silk proteins and bovine serum albumin. For comparison and to determine the molecular weight range of macromolecules that can infiltrate cn-CNC films, they were also infiltrated with a range of poly(ethylene glycol) polymers that do not interact strongly with CNCs. The extent and impact of infiltration were evaluated by studying the optical reflection properties of the resulting hybrid materials (UV-vis spectroscopy), while fracture dissipation mechanisms were observed via electron microscopy. We propose that infiltration of cn-CNCs enables the introduction of virtually any secondary phase for nanocomposite formation that is otherwise not possible using simple mixing or other conventional approaches.

Properties of Polyvinyl Alcohol Films Composited With Hemicellulose and Nanocellulose Extracted From Artemisia selengensis Straw

Artemisia selengensis straw is an agricultural residue with great potential as a renewable resource because it is rich in lignocellulose. In this study, A. selengensis straw was used as a source of hemicelluloses (ASH) and cellulose nanocrystals (ASCNC) to produce biodegradable films. Different content levels of ASCNC were used as additives to improve composite films with ASH and polyvinyl alcohol (PVA). Various mechanical and hydrophobic properties of the films were analyzed. The composite films enhanced by ASCNC exhibited greater strength and were more effective as a barrier to water vapor when compared to that of the control ASH/PVA film. The tensile strength of the composite film was increased 80.1% to 36.21 MPa with ASCNC loading exceeding 9%, and the water vapor transmission rate decreased 15.45% when 12% ASCNC was added. Furthermore, the ASCNC-enhanced ASH/PVA composite film reduced a greater amount of light transmission than the control film.

Barrier Film of Etherified Hemicellulose from Single-Step Synthesis

Hemicellulose with good biodegradability and low oxygen permeability shows great potential in food packaging. However, its strong hydrophilicity leads to its poor moisture resistance, which hinders its wider application. In this paper, a near-hydrophobic hemicellulose was obtained by using single-step synthesis from poplar powder via etherification modification with epoxy chloropropane. This proposed approach has the advantage of avoiding the destruction of hemicellulose structure by secondary alkali-hydrolysis, which was what usually occurred in traditional etherification procedures. The feasibility of using epoxy chloropropane as an alkylation reagent to etherify hemicellulose was confirmed, and the reaction mechanism was elucidated. Contact angle test, thermogravimetric analysis, oxygen transmittance test, and infrared spectrum analysis showed that the barrier property and thermal stability of etherified hemicellulose films have been significantly improved. At an epoxy chloropropane/wood powder ratio (volume/weight) of 2/3 (mL/g), the epoxy hemicellulose films contained the most epoxy groups and displayed the best performance, i.e., tensile strength of 14.6 MPa, surface contact angle of 71.7° and oxygen transmission coefficient of 1.9 (cm3·µm)/(m2·d·kPa), showing great promise as barrier film in food-packaging.

From cashew byproducts to biodegradable active materials: Bacterial cellulose-lignin-cellulose nanocrystal nanocomposite films

While the cashew culture is focused on processing and commercialization of cashew nuts, the pseudofruit (cashew apples) - highly perishable and of limited acceptance - are mostly wasted. The cashew tree pruning fiber (CTPF) is another interesting cashew byproduct. In this study, films have been made from bacterial cellulose produced from cashew apple juice, and added with lignin (0-15 wt%) and cellulose nanocrystals (0-8 wt%), both from CTPF, which enhanced tensile properties and decreased water vapor permeability of the films. Moreover, lignin, although imparting brown color and opacity to the films, was effective to provide the films with UV-absorbing and antioxidant properties, making the films interesting for packaging of food products susceptible to lipid oxidation. The films did not exhibit antimicrobial activity against bacteria or yeasts.

Hemicellulose-Based Film: Potential Green Films for Food Packaging

Globally increasing environmental awareness and the possibility of increasing price and dwindling supply of traditional petroleum-based plastics have led to a breadth of research currently addressing environmentally friendly bioplastics as an alternative solution. In this context, hemicellulose, as the second richest polysaccharide, has attracted extensive attention due to its combination of such advantages as abundance, biodegradability, and renewability. Herein, in this review, the latest research progress in development of hemicellulose film with regard to application in the field of food packaging is presented with particular emphasis on various physical and chemical modification approaches aimed at performance improvement, primarily for enhancement of mechanical, barrier properties, and hydrophobicity that are essential to food packing materials. The development highlights of hemicellulose film substrate are outlined and research prospects in the field are described.

Morphological, chemical and thermal analysis of cellulose nanocrystals extracted from bamboo fibre

This work investigates the extraction of cellulose nanocrystals (CNC) from bamboo fibre as an alternative approach to utilize the waste bamboo fibre. In this study, bamboo fibre was subjected to acid hydrolysis for efficient isolation of CNC from bamboo fibre. The extracted CNC's were morphologically, characterized via Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM). The energy Dispersive X-rays (EDX) provided the elemental composition of the prepared CNC's and X-ray diffractometer (XRD) exhibited their crystallinity. The physiochemical analysis was done via Fourier Transform Infrared (FTIR); and their thermal analysis was revealed by Thermogravimetric Analysis (TGA) and Differential scanning calorimetry (DSC). As from their morphological investigations, rod like structures of CNC's were observed under SEM analysis with higher carbon content as demonstrated by EDX, while needle shaped CNC's were observed from TEM and AFM studies. Acid hydrolysis for 45 min resulted into higher degree of crystallinity and higher yield of CNC's about 86.96% and 22% respectively. Owing to higher quality of CNC's obtained as a result of efficient and modified techniques, these can find potential usage in nanocomposites for biomedical and food packaging application.

Valorization of Wheat Byproducts for the Co-Production of Packaging Material and Enzymes

Waste management systems are overloaded with huge streams of plastic, a large part of this being originated from packaging. Additionally, the production of wheat, one of the most cultivated crops in the world, generates low-value lignocellulosic materials, which are mostly discarded. In this study, the wheat lignocellulosic byproducts straw and bran were used for the co-production of enzymes and bio-based materials with possible application as packaging via the compression molding method. The mechanical properties of the films were studied based on the effects of the removal of lignin by alkali and biological pretreatment, the growth of filamentous fungi, the size of the particles, and the enzyme recovery. Generally, the straw films were stiffer than the bran ones, but the highest Young’s modulus was obtained for the biologically pretreated bran (1074 MPa). The addition of a step to recover the fungal cellulases produced during the cultivation had no statistical effect on the mechanical properties of the films. Moreover, alkali and biological pretreatments improved the anaerobic biodegradability of the straw films. Thus, the wheat bran and straw can be used for the co-production of enzymes, materials, and biogas, potentially changing how wheat and packaging wastes are managed.

Optimising wheat straw alkali-organosolv pre-treatment to enhance hemicellulose modification and compatibility with reinforcing fillers

Hemicellulose acetylation, filler compatibility and film hydrophobicity were enhanced by optimising alkali-catalysed organosolv treatment conditions for wheat straw before hemicellulose extraction. Two optimum (OPT) conditions were established by varying organosolv components' concentrations [ethanol (EC) (50-80%) and NaOH (1-13%)], and time (2-6 h), in a Box-Behnken experimental design. The OPT1 (1% NaOH/50% EC/6h) that enhanced acetylation and filler compatibility, and OPT2 (13% NaOH/80% EC/5h) that enhanced hydrophobicity by minimising degree of acetylation (DS), uronic acid content and arabinose/xylose ratio. The films made from OPT2 hemicellulose had higher water contact angle (68.1°) than OPT1 hemicellulose (39.90°). However, OPT1 hemicellulose had a higher DS (1.7 vs 0.4), and their acetylated nanocellulose reinforced films had higher tensile strength (10.59 vs 4.87 MPa) and Young modulus (590.15 vs 323.64 MPa) than OPT2 hemicellulose. Therefore, hemicellulose acetylation, hydrophobicity and filler interaction can be engineered by manipulating the organosolv treatment conditions.

Enhanced Rheological Properties of PLLA with a Purpose-Designed PDLA-b-PEG-b-PDLA Triblock Copolymer and the Application in the Film Blowing Process to Acquire Biodegradable PLLA Films

The inadequate rheological properties limit the film blowing process of biodegradable polylactic acid (PLA), thus hindering its potential application in environmentally friendly packaging films and mulch films. Herein, biodegradable polyethylene glycol (PEG) and d-lactide were used to synthesize three kinds of poly-d-lactic acid (PDLA)-b-PEG-b-PDLA (DPD) triblock copolymers, and their effects on stereocomplex (sc) structure formation and rheological properties of the composites were studied. The results showed that the poly l-lactic acid (PLLA)/DPD4k sample introduced the highest sc content, storage modulus, and complex viscosity value compared with PLLA/DPD2k and PLLA/DPD10k at the same loading condition, indicating that the PEG4k chains can better accelerate the formation of a sc network between DPD4k and the PLLA matrix. The introduction of 10 wt % DPD4k also resulted in about 38 times longer relaxation time and a strain-hardening behavior during the steady biaxial extension of PLLA. At last, the continuous film blowing process was successfully conducted in the PLLA/DPD4k composites, which acquired a stable blow-up ratio of 3.07. On the basis of the above results, the soft chain-grafted PDLA copolymer may provide a novel method for film blowing of biodegradable PLA.

A review on versatile applications of blends and composites of CNC with natural and synthetic polymers with mathematical modeling

Cellulose is world's most abundant, renewable and recyclable polysaccharide on earth. Cellulose is composed of both amorphous and crystalline regions. Cellulose nanocrystals (CNCs) are extracted from crystalline region of cellulose. The most attractive feature of CNC is that it can be used as nanofiller to reinforce several synthetic and natural polymers. In this article, a comprehensive overview of modification of several natural and synthetic polymers using CNCs as reinforcer in respective polymer matrix is given. The immense activities of CNCs are successfully utilized to enhance the mechanical properties and to broaden the field of application of respective polymer. All the technical scientific issues have been discussed highlighting the recent advancement in biomedical and packaging field.

Improved Dispersion of Bacterial Cellulose Fibers for the Reinforcement of Paper Made from Recycled Fibers

Bacterial cellulose (BC) can be used to improve the physical properties of paper. However, previous studies have showed that the effectiveness of this improvement is impaired by the agglomeration of the disintegrated BC fibers. Effective dispersion of BC fibers is important to their reinforcing effects to paper products, especially those made of recycled fibers. In this study, carboxymethyl cellulose, xylan, glucomannan, cationized starch, and polyethylene oxide were used to improve the dispersion of BC fibers. With dispersed BC fibers, the paper made of recycled fiber showed improved dry tensile strength. The best improvement in dry tensile index was 4.2 N·m/g or 12.7% up, which was obtained by adding BC fibers dispersed with glucomannan. Glucomannan had the highest adsorption onto BC fibers, i.e., 750 mg/g at 1000 mg/L concentration, leading to the best colloidal stability of BC fiber suspension that had no aggregation in 50 min at 0.1 weight ratio of glucomannan to BC. TEMPO-mediated oxidation of BC was effective in improving its colloidal stability, but not effective in improving the ability of BC fiber to enhance paper dry tensile index while the wet tensile index was improved from 0.89 N·m/g to 1.59 N·m/g, i.e., ~80% improvement.

A review on processing techniques of bast fibers nanocellulose and its polylactic acid (PLA) nanocomposites

The utilization of nanocellulose has increasingly gained attentions from various research fields, especially the field of polymer nanocomposites owing to the growing environmental hazardous of petroleum based fiber products. Meanwhile, the searching of alternative cellulose sources from different plants has become the interests for producing nanocellulose with varying characterizations that expectedly suit in specific field of applications. In this content the long and strong bast fibers from plant species was gradually getting its remarkable position in the field of nanocellulose extraction and nanocomposites fabrications. This review article intended to present an overview of the chemical structure of cellulose, different types of nanocellulose, bast fibers compositions, structure, polylactic acid (PLA) and the most probable processing techniques on the developments of nanocellulose from different bast fibers especially jute, kenaf, hemp, flax, ramie and roselle and its nanocomposites. This article however more focused on the fabrication of PLA based nanocomposites due to its high firmness, biodegradability and sustainability properties in developed products towards the environment. Along with this it also explored a couple of issues to improve the processing techniques of bast fibers nanocellulose and its reinforcement in the PLA biopolymer as final products.

Physical-Chemical Properties of Edible Film Made from Soybean Residue and Citric Acid

The effect of citric acid on the properties of soybean enzyme-assisted aqueous extraction processing (EAEP) residue edible film was studied. The washed soybean EAEP residue was produced by the process of EAEP. It was determined that the washed soybean EAEP residue is rich in fibers (76.10 ± 1.03%) and has lower oil and protein contents (7.74 ± 0.11% and 3.50 ± 0.20%, resp.). Edible films intended for food packaging have been produced from the washed EAEP residue combined with glycerol, different concentrations of citric acid (0%, 10%, 15%, 20%, 25%, and 30%), and sodium hypophosphite. The spectra have evidenced that the cross-linking reaction of citric acid and fibers has taken place in the residue. 30-CA films showed the highest tensile strength (17.52 MPa) and the lowest water vapor permeability (7.21 g·cm−1·s−1·Pa−1). Also, it indicated that citric acid can cross-link with the hydroxyls of polysaccharide and improve the compatibilization between the polymeric molecules to improve the intermolecular interaction between polysaccharide molecules, so that the water uptake is reduced. The smooth surface and better translucency of the films suggest that the EAEP residue films treated with citric acid are suitable for application in food packaging.