Hydrogen bonding impact on chitosan plasticization

Reconstruction of zinc-metal battery solvation structures operating from -50 ~ +100 °C

Serious solvation effect of zinc ions has been considered as the cause of the severe side reactions (hydrogen evolution, passivation, dendrites, and etc.) of aqueous zinc metal batteries. Even though the regulation of cationic solvation structure has been widely studied, effects of the anionic solvation structures on the zinc metal were rarely examined. Herein, co-reconstruction of anionic and cationic solvation structures was realized through constructing a new multi-component electrolyte (Zn(BF4)2-glycerol-boric acid-chitosan-polyacrylamide, simplified as ZGBCP), which incorporates double crosslinking network via the esterification, protonation and polymerization reactions, thereby combining multiple advantages of 'liquid-like' high conductivity, 'gel-like' robust interface, and 'solid-like' high Zn2+ transfer number. Based on the ZGBCP electrolyte, the Zn anodes achieve record-low polarization and stable cycling. Furthermore, the ZGBCP electrolyte renders the AZMBs ultrawide working temperature (-50 °C ~ +100 °C) and ultralong cycle life (30000 cycles), which further validates the feasibility of the dual solvation structure strategy and provides a innovative perspective for the development of high-performance AZMBs.

Morphological 3D Analysis of PLGA/Chitosan Blend Polymer Scaffolds and Their Impregnation with Olive Pruning Residues via Supercritical CO2

Natural extracts, such as those from the residues of the Olea europaea industry, offer an opportunity for use due to their richness in antioxidant compounds. These compounds can be incorporated into porous polymeric devices with huge potential for tissue engineering such as bone, cardiovascular, osteogenesis, or neural applications using supercritical CO2. For this purpose, polymeric scaffolds of biodegradable poly(lactic-co-glycolic acid) (PLGA) and chitosan, generated in situ by foaming, were employed for the supercritical impregnation of ethanolic olive leaf extract (OLE). The influence of the presence of chitosan on porosity and interconnectivity in the scaffolds, both with and without impregnated extract, was studied. The scaffolds have been characterized by X-ray computed microtomography, scanning electron microscope, measurements of impregnated load, and antioxidant capacity. The expansion factor decreased as the chitosan content rose, which also occurred when OLE was used. Pore diameters varied, reducing from 0.19 mm in pure PLGA to 0.11 mm in the two experiments with the highest chitosan levels. The connectivity was analyzed, showing that in most instances, adding chitosan doubled the average number of connections, increasing it by a factor of 2.5. An experiment was also conducted to investigate the influence of key factors in the impregnation of the extract, such as pressure (10-30 MPa), temperature (308-328 K), and polymer ratio (1:1-9:1 PLGA/chitosan). Increased pressure facilitated increased OLE loading. The scaffolds were evaluated for antioxidant activity and demonstrated substantial oxidation inhibition (up to 82.5% under optimal conditions) and remarkable potential to combat oxidative stress-induced pathologies.

High biocompatible bone screw enabled by a rapid and robust chitosan/silk fibroin composite material

Hydrogel has attracted tremendous attentions due to its excellent biocompatibility and adaptability in biomedical field. However, it is challenging by the conflicts between inadequate mechanical properties and service requirements. Herein, a rapid and robust hydrogel was developed by interpenetrating networks between chitosan and silk fibroin macromolecules. Thanks to these unique networks, the chitosan-based hydrogel exhibited superior mechanical performances. The maximum breaking strength, Young's modulus and swelling ratio of the hydrogel were 1187.8 kPa, 383.1 MPa and 4.5 % respectively. The hydrogel also supported the proliferation of human umbilical vein endothelial cells for 7 days. Notably, the hydrogel was easily molded into bone screw, and demonstrated compressive strengths of 45.7 MPa, Young's modulus of 675.6 MPa, respectively. After 49-day biodegradation, the residual rate of the screw in collagenase I solution was up to 89.6 % of the initial weight. In vitro, the screws not only had high resistance to biodegradation, but also had outstanding biocompatibility of osteoblast. This study provided a promising physical-chemical double crosslinking strategy to build orthopedic materials, holding a great potential in biomedical devices.

Disulfide bond network crosslinked flexible multifunctional chitosan coating on fabric surface prepared by the chitosan grafted with thioctic acid

In this study, we propose a novel approach to improve the performance of chitosan coating, and thioctic acid with disulfide bonds in its molecular structure was grafted onto the side groups of chitosan macromolecules. The introduction of disulfide bond network cross-linking structure in chitosan coating weakens hydrogen bonds between chitosan macromolecules, causing the macromolecular chains to be more prone to relative motion when subjected to external forces, ultimately improving flexibility of the coating. The modified chitosan becomes more suitable for antibacterial modification in smart wearable fabrics. Subsequently, we fabricated a smart wearable fabric with excellent antibacterial properties and strong electromagnetic shielding by employing the layer-by-layer spraying technique. This involved incorporating chitosan with disulfide bonds and MXene nanoparticles. The fabric surfaces containing chitosan with disulfide bonds exhibited enhanced flexibility compared to unmodified chitosan fabric, resulting in an 8-point improvement in tactile sensation ratings. This research presents a novel approach that simultaneously enhances the electromagnetic shielding effectiveness and efficient antibacterial properties of smart wearable textiles. Consequently, it advances the application of chitosan in the field of antibacterial finishing for functional textiles.

Natural polysaccharides and proteins-based films for potential food packaging and mulch applications: A review

Conventional nondegradable packaging and mulch films, after reaching the end of their use, become a major source of waste and are primarily disposed of in landfills. Accumulation of non-degradable film residues in the soil leads to diminished soil fertility, reduced crop yield, and can potentially affect humans. Application of degradable films is still limited due to the high cost, poor mechanical, and gas barrier properties of current biobased synthetic polymers. In this respect, natural polysaccharides and proteins can offer potential solutions. Having versatile functional groups, three-dimensional network structures, biodegradability, ease of processing, and the potential for surface modifications make polysaccharides and proteins excellent candidates for quality films. Besides, their low-cost availability as industrial waste/byproducts makes them cost-effective alternatives. This review paper covers the performance properties, cost assessment, and in-depth analysis of macromolecular structures of some natural polysaccharides and proteins-based films that have great potential for packaging and mulch applications. Proper dissolution of biopolymers to improve molecular interactions and entanglement, and establishment of crosslinkages to form an ordered and cohesive polymeric structure can help to obtain films with good properties. Simple aqueous-based film formulation techniques and utilization of waste/byproducts can stimulate the adoption of affordable biobased films on a large-scale.

Tunable Fungal Monofilaments from Food Waste for Textile Applications

A fungal biorefinery is presented to valorize food waste to fungal monofilaments with tunable properties for different textile applications. Rhizopus delemar is successfully grown on bread waste and the fibrous cell wall is isolated. A spinnable hydrogel is produced from cell wall by protonation of amino groups of chitosan followed by homogenization and concentration. Fungal hydrogel is wet spun to form fungal monofilaments which underwent post-treatments to tune the properties. The highest tensile strength of untreated monofilaments is 65 MPa (and 4% elongation at break). The overall highest tensile strength of 140.9 MPa, is achieved by water post-treatment. Moreover, post-treatment with 3% glycerol resulted in the highest elongation % at break, i.e., 14%. The uniformity of the monofilaments also increased after the post-treatments. The obtained monofilaments are compared with commercial fibers using Ashby's plots and potential applications are discussed. The wet spun monofilaments are located in the category of natural fibers in Ashby's plots. After water and glycerol treatments, the properties shifted toward metals and elastomers, respectively. The compatibility of the monofilaments with human skin cells is supported by a biocompatibility assay. These findings demonstrate fungal monofilaments with tunable properties fitting a wide range of sustainable textiles applications.

Development of Antioxidant and Antimicrobial Membranes Based on Functionalized and Crosslinked Chitosan for Tissue Regeneration

Tissue engineering is an interdisciplinary field that develops new methods to enhance the regeneration of damaged tissues, including those of wounds. Polymer systems containing bioactive molecules can play an important role in accelerating tissue regeneration, mitigating inflammation process, and fighting bacterial infection. Chitosan (CS) has attracted much attention regarding its use in wound healing system fabrication thanks to its biocompatibility, biodegradability, and the presence of functional groups in its structure. In this work, bioactive chitosan-based membranes were obtained by both chemical and physical modifications of the polymer with glycidyl methacrylate and glycerol (GLY), respectively. The most suitable GLY concentration to obtain wound healing systems with good elongation at break, a good water vapor transmission rate (WVTR), and good wettability values was 20% (w/w). Afterwards, the membranes were crosslinked with different concentrations of ethylene glycol dimethacrylate (EGDMA). By using a concentration of 0.05 mM EGDMA, membranes with a contact angle and WVTR values suitable for the application were obtained. To make the system bioactive, 3,4-dihydrocinnamic acid (HCAF) was introduced into the membranes, either by imbibition or chemical reaction, using laccase as a catalyst. Thermal and mechanical analyses confirmed the formation of a cohesive network, which limited the plasticizing effect of GLY, particularly when HCAF was chemically bound. The HCAF-imbibed membrane showed a good antioxidant and antimicrobial activity, highlighting the potential of this system for the treatment of wound healing.

Tuning glycerol plasticization of chitosan with boric acid

Chitosan-based bioplastics are attractive biodegradable alternatives to petroleum-derived plastics. However, optimizing the properties of chitosan materials to fit a particular application or obtain a desired property is not a trivial feat. Here, we report the tunability of glycerol-plasticized chitosan films with the addition of boric acid. In combination, glycerol and boric acid form neutral complexes that alter the hydrogen-bonding face of the plasticizer and ultimately limit glycerol's ability to plasticize chitosan. Thus, we found that chitosan films containing glycerol-boric acid complexes were less flexible, had increased thermal transition temperatures, and showed more uniform morphologies. Structural, thermal, mechanical and morphological characterization was performed using ATR-FTIR, TGA and DSC, DMA, and SEM respectively. Molecular-level interactions of the neutral boron complexes and D-glucosamine, the repeat unit of chitosan, were also investigated used NMR and ATR-FTIR. The results of this work demonstrate the necessity of specific hydrogen-bonding interactions between the plasticizer and the polymer for effective plasticization, an important insight into the plasticization mechanism of chitosan films. Furthermore, the formation of complexes with glycerol is a novel and convenient method for tuning the physical properties of chitosan films.

Physically cross-linked chitosan gel with tunable mechanics and biodegradability for tissue engineering scaffold

Chitosan, a cationic polysaccharide, exhibits promising potential for tissue engineering applications. However, the poor mechanical properties and rapid biodegradation have been the major limitations for its applications. In this work, an effective strategy was proposed to optimize the mechanical performance and degradation rate of chitosan gel scaffolds by regulating the water content. Physical chitosan hydrogel (HG, with 93.57 % water) was prepared by temperature-controlled cross-linking, followed by dehydration to obtain xerogel (XG, with 2.84 % water) and rehydration to produce wet gel (WG, with 56.06 % water). During this process, changes of water content significantly influenced the water existence state, hydrogen bonding, and the chain entanglements of chitosan in the gel network. The mechanical compression results showed that the chitosan gel scaffolds exhibited tunable compressive strength (0.3128-139 MPa) and compressive modulus (0.2408-1094 MPa). XG could support weights exceeding 65,000 times its own mass while maintaining structural stability. Furthermore, in vitro and in vivo experiments demonstrated that XG and WG exhibited better biocompatibility and resistance to biodegradation compared with HG. Overall, this work contributes to the design and optimization of chitosan scaffolds without additional chemical crosslinkers, which has potential in tissue engineering and further clinical translation.

Chitosan and chitosan/turmeric-based membranes for wound healing: Production, characterization and application

In the present study, chitosan and chitosan/turmeric-based membranes were produced, characterized and applied in in vivo experiments showing the applicability for skin wound repair. Chitosan 1 % (w/v), chitosan + glycerol 30 % (w/w) and chitosan + glycerol 30 % + turmeric 1.5 % (w/w) membranes were produced through the casting technique. Self-sustainable, homogeneous, and flexible membranes were obtained from all materials tested. The FTIR spectra showed the main vibrational bands for materials used in the chemical groups. The membranes containing glycerol are more flexible than those formed with pure chitosan. Membranes formed with glycerol and glycerol/turmeric are more hydrophilic compared to the membranes formed by pure chitosan. The in vivo results showed that the group who received the chi/gly/turmeric membrane had a statistically greater reduction in the injured area, as well as a better healing process in the histological analysis compared to the other experimental groups. The material developed here is from a natural source, low cost and easy to apply and can accelerate the process of repairing skin lesions.

Green interconnected network structure of chitosan-microcrystalline cellulose-lignin biopolymer film for active packaging applications

As an excellent alternative to petroleum-based food packaging materials, a novel green hybrid composite film with an excellent interconnected network structure was successfully fabricated by integrating chitosan (chi), microcrystalline cellulose (MCC), and lignin nanoparticles (LNP), including the desired amount of plasticizer glycerol (gly). Overall, 36 combinations were developed and investigated for superior biocomposite film formation. Among the various concentration ratios, the 40:35:25 chi-MCC-gly film provided well-organized film formation, good physicochemical properties, mechanical stability, efficient water contact angle, reduced water solubility, and lower water vapor permeability (11.43 ± 0.55 × 10-11 g.m-1.s-1.Pa-1). The performance of the chi-MCC-gly film further enhanced by the homogeneous incorporation of ∼100 nm LNP. With 1 % LNP addition, the tensile strength of the film increased (28.09 MPa, 47.10 % increase) and the water vapor permeability reached a minimum of 11.43 × 10-11 g.m-1.s-1.Pa-1, which proved the impact of LNP in composite films. Moreover, the films showed excellent resistance to thermal shrinkage even at 100 °C and exhibited nearly 100 % UV blocking efficiency at higher LNP concentrations. Interestingly, the green composite films extended the shelf life of freshly cut cherry tomatoes to seven days without spoilage. Overall, the facile synthesis of strong, insoluble, UV-blocking, and thermally stable green composite films realized for food packaging applications.

Synthesis of films based on chitosan and protic ionic liquids to be used as wound dressing on the oral mucosa

Oral mucosal ulcerations expose connective tissue to different pathogens and this can progress to systemic infection. This study aimed to synthesize environmentally-friendly films with chitosan and protic ionic liquids, possessing mucoadhesive properties, activity against opportunistic microorganisms, enhanced malleability and mechanical resistance to be used as a wound dressing on the oral mucosa. Therefore, films with chitosan and 10, 35, and 50 % (wt/wt) of 2-hydroxy diethylammonium lactate, salicylate, and maleate protic ionic liquids were synthesized. Thickness measurements and mechanical properties analysis were performed. In addition, oral mucoadhesion, antimicrobial activity, and cytotoxicity properties were investigated. Results showed that the addition of 35wt% and 50wt% of all kinds of protic ionic liquids tested presented significant improvements in film thickness and mechanical properties. Films based on chitosan and the protic ionic liquid 2-hydroxy diethylammonium salicylate at percentages of 35 and 50wt% exhibited superior mucoadhesive properties, antimicrobial activity on opportunistic microorganisms and an improvement in their flexibility after immersion in synthetic saliva. Cytotoxicity results suggest that all kinds of chitosan/protic ionic liquids films tested are safe for intra-oral use. Therefore, the results of this study indicate that these materials could be good candidates for efficient and environmentally-friendly wound dressing films on the oral mucosa.

Use of Chitosan from Southern King Crab to Develop Films Functionalized with RGD Peptides for Potential Tissue Engineering Applications

Southern King Crab (SKC) represents an important fishery resource that has the potential to be a natural source of chitosan (CS) production. In tissue engineering, CS is very useful to generate biomaterials. However, CS has a lack of signaling molecules that facilitate cell-substrate interaction. Therefore, RGD (arginine-glycine-aspartic acid) peptides corresponding to the main integrin recognition site in extracellular matrix proteins have been used to improve the CS surface. The aim of this study was to evaluate in vitro cell adhesion and proliferation of CS films synthesized from SKC shell wastes functionalized with RGD peptides. The FTIR spectrum of CS isolated from SKC shells (SKC-CS) was comparable to commercial CS. Thermal properties of films showed similar endothermic peaks at 53.4 and 53.0 °C in commercial CS and SKC-CS, respectively. The purification and molecular masses of the synthesized RGD peptides were confirmed using HPLC and ESI-MS mass spectrometry, respectively. Mouse embryonic fibroblast cells showed higher adhesion on SKC-CS (1% w/v) film when it was functionalized with linear RGD peptides. In contrast, a cyclic RGD peptide showed similar adhesion to control peptide (RDG), but the highest cell proliferation was after 48 h of culture. This study shows that functionalization of SKC-CS films with linear or cyclic RGD peptides are useful to improve effects on cell adhesion or cell proliferation. Furthermore, our work contributes to knowledge of a new source of CS to synthesize constructs for tissue engineering applications.

Study of Elastin, Hydrolyzed Collagen and Collagen-like Products in a Tri-Layered Chitosan Membrane to Test Anti-Aging Skin Properties

The use of animal testing in the cosmetic industry is already prohibited in more than 40 countries, including those of the EU. The pressure for it to be banned worldwide in the future is increasing, so the need for animal alternatives is of great interest today. In addition, using animals and humans in scientific research is ethically reprehensible. This study aimed to prove some of the anti-aging properties of elastin (EL), hydrolyzed collagen (HC), and two vegan collagen-like products (Veg Col) in a tri-layered chitosan membrane that was ionically crosslinked with sodium tripolyphosphate (TPP). In the first approach, as a way of representing different layers of a biological system, such as the epidermis and the two dermis sublayers, EL, HC, or Veg Col were independently introduced into the two inner layers (2L_(i+b)). Their effects were compared with those of their introduction into three layers (3L). Different experiments were performed on the membrane to test its elasticity, hydration, moisture retention, and pore reduction at different concentrations of EL, HC, and Veg Col, and the results were normalized vs. a blank membrane. This new alternative to animal or human testing can be suitable for proving certain efficacy claims for active ingredients or products in the pharmaceutical, nutritional, and cosmetic fields.

Design strategy and research progress of multifunctional nanoparticles in lung cancer therapy

INTRODUCTION

Lung cancer is one of the cancer types with the highest mortality rate, exploring a more effective treatment modality that improves therapeutic efficacy while mitigating side effects is now an urgent requirement. Designing multifunctional nanoparticles can be used to overcome the limitations of drugs and conventional drug delivery systems. Nanotechnology has been widely researched, and through different needs, suitable nanocarriers can be selected to load anti-cancer drugs to improve the therapeutic effect. It is foreseeable that with the rapid development of nanotechnology, more and more lung cancer patients will benefit from nanotechnology. This paper reviews the merits of various multifunctional nanoparticles in the treatment of lung cancer to provide novel ideas for lung cancer treatment.

AREAS COVERED

This review focuses on summarizing various nanoparticles for targeted lung cancer therapy and their advantages and disadvantages, using nanoparticles loaded with anti-cancer drugs, delivered to lung cancer sites, enhancing drug half-life, improving anti-cancer drug efficacy and reducing side effects.

EXPERT OPINION

The delivery mode of nanoparticles with superior pharmacokinetic properties in the in vivo circulation enhances the half-life of the drug, and provides tissue-targeted selectivity and the ability to overcome biological barriers, bringing a revolution in the field of oncology.

Optimization of the Extraction of Chitosan and Fish Gelatin from Fishery Waste and Their Antimicrobial Potential as Active Biopolymers

Fishery residues are abundant raw materials that also provide numerous metabolites with high added value. Their classic valorization includes energy recovery, composting, animal feed, and direct deposits in landfills or oceans along with the environmental impacts that this entails. However, through extraction processes, they can be transformed into new compounds with high added value, offering a more sustainable solution. The aim of this study was to optimize the extraction process of chitosan and fish gelatin from fishery waste and their revalorization as active biopolymers. We successfully optimized the chitosan extraction process, achieving a yield of 20.45% and a deacetylation degree of 69.25%. For the fish gelatin extraction process, yields of 11.82% for the skin and 2.31% for the bone residues were achieved. In addition, it was demonstrated that simple purification steps using activated carbon improve the gelatin's quality significantly. Finally, biopolymers based on fish gelatin and chitosan showed excellent bactericidal capabilities against Escherichia coli and Listeria innocua. For this reason, these active biopolymers can stop or decrease bacterial growth in their potential food packaging applications. In view of the low technological transfer and the lack of information about the revalorization of fishery waste, this work offers extraction conditions with good yields that can be easily implemented in the existing industrial fabric, reducing costs and supporting the economic development of the fish processing sector and the creation of value from its waste.

Synthesis of biodegradable antimicrobial pH-sensitive silver nanocomposites reliant on chitosan and carrageenan derivatives for 5-fluorouracil drug delivery toward HCT116 cancer cells

The current research relies on a one-pot green biosynthesis of silver nanoparticles (SNPs) with various ratios of silver (Ag) in the existence of N, N, N-trimethyl chitosan chloride (TMC) and carboxymethyl kappa-carrageenan (CMKC), to investigate the effectiveness of the synthesized silver nanocomposites (SNCs) as pH sensitive biodegradable carrier for orally intestinal delivery of 5-fluorouracil (5-FU) drug. FTIR, XRD, TEM and FE-SEM/EDX methods were utilized to demonstrate the structure of the prepared polyelectrolyte complex PEC (TMC/CMKC) and SNCs (TMC/CMKC/Ag). The results showed that the 5-FU encapsulation effectiveness inside all of the prepared SNCs samples was improved by increasing the concentration of Ag, reaching 92.16 ± 0.57 % with 3 % Ag. In vitro release behavior of 5-FU loaded SNC 3 % (TMC/CMKC/Ag 3 %), displayed slow and sustained release reaching 96.3 ± 0.81 % up to 24 h into pH 7.4 medium. The successful release of 5-FU from the loaded SNC 3 % was confirmed through occurrence of strong cytotoxicity, with an IC₅₀ value of 31.15 μg/ml, and high % of apoptotic cells (30.66 %) within the treated HCT116 cells. Besides, SNC 3 % showed good biodegradability and antimicrobial properties against different bacterial strains. Overall, SNC 3 % can be suggested as an effective system for both controlled drug delivery and antibacterial action.

The Role of Non-Covalent Bonds in the Deformation Process of Coal: An Experimental Study on Bituminous Coal

The chemical structures of tectonically deformed coal are significantly altered by stress. However, the stress response of non-covalent bonds in deformation experiments and the role of non-covalent bonds in the deformation process of coal have not been studied yet. In this work, coals before and after simulative deformation experiments were systematically investigated to uncover the coal’s deformation mechanism and the variation of non-covalent bonds. The results indicate that differential stress and temperature can promote ductile deformation while confine pressure hinders the deformation process. Differential stress and temperature in the ranges of 100–150 MPa and 100–200 °C, respectively, are key transition conditions from brittle to ductile deformation for the selected bituminous coal. Furthermore, hydrogen bonds and π–π bonds crosslinking coal molecular networks determine the mechanical properties of the coal. The simulative deformation experiments indicate that, with an increase in the coal’s deformation intensity, hydrogen bonds and π–π bonds are inclined to be disrupted in the relaxation stage, which enhances the motion ability of the liberated molecular structures and reduces the brittleness of the coal. In the rearrangement stage, tighter and more ordered configurations are formed, accompanied by the formation of π–π bonds. Coals in the deformation experiments are inclined to undergo ductile deformation once sufficient non-covalent bonds are cleaved in the relaxation stage.

Cytotoxicity Enhancement in MCF-7 Breast Cancer Cells with Depolymerized Chitosan Delivery of α-Mangostin

The application of α-mangostin (AMG) in breast cancer research has wide intentions. Chitosan-based nanoparticles (CSNPs) have attractive prospects for developing anticancer drugs, especially in their high flexibility for modification to enhance their anticancer action. This research aimed to study the impact of depolymerized chitosan (CS) on the cytotoxicity enhancement of AMG in MCF-7 breast cancer cells. CSNPs effectivity depends on size, shape, crystallinity degree, and charge surface. Modifying CS molecular weight (MW) is expected to influence CSNPs’ characteristics, impacting size, shape, crystallinity degree, and charge surface. CSNPs are developed using the method of ionic gelation with sodium tripolyphosphate (TPP) as a crosslinker and spray pyrolysis procedure. Nanoparticles’ (NPs) sizes vary from 205.3 ± 81 nm to 450.9 ± 235 nm, ZP charges range from +10.56 mV to +51.56 mV, and entrapment efficiency from 85.35% to 90.45%. The morphology of NPs are all the same spherical forms. In vitro release studies confirmed that AMG–Chitosan–High Molecular Weight (AMG–CS–HMW) and AMG–Chitosan–Low Molecular Weight (AMG–CS–LMW) had a sustained-release system profile. MW has a great influence on surface, drug release, and cytotoxicity enhancement of AMG in CSNPs to MCF-7 cancer cells. The preparations AMG–CS–HMW and AMG–CS–LMW NPs considerably enhanced the cytotoxicity of MCF-7 cells with IC₅₀ values of 5.90 ± 0.08 µg/mL and 4.90 ± 0.16 µg/mL, respectively, as compared with the non-nano particle formulation with an IC₅₀ of 8.47 ± 0.29 µg/mL. These findings suggest that CSNPs can enhance the physicochemical characteristics and cytotoxicity of AMG in breast cancer treatment.

Enhancing the thermostability, UV shielding and antimicrobial activity of transparent chitosan film by carbon quantum dots containing N/P

The chitosan (CS) transparent film has attracted much attention in food and medicine packaging areas due to their biodegradability and good availability. A novel carbon quantum dots compound containing nitrogen and phosphorus (NP-CQDs) was obtained by reacting citric acids, with urea and phytic acids. The density of the film was increased, and the water vapor permeation was reduced by the presence of NP-CQDs. The introduction of 4 wt% NP-CQDs increased the water contact angle of the CS film from 79.2° to 105.8°. The shielding on UV-A and UV-B transmittance was increased with the NP-CQDs loading. The film containing 4 wt% NP-CQDs blocked more than 90.2% UV-A and 96.5% UV-B; however, it only blocked 26.8% visible light. It also exhibited better antibacterial activity to both E. coli and S. aureus than the control CS film. This work provided a feasible way to prepare multifunctional bio-safe film.

Hydrogen-bond-dominated mechanical stretchability in PVA films: from phenomenological to numerical insights

Hydrogen bonds (H-bonds) in poly(vinyl alcohol) (PVA) play a crucial role in macroscopic mechanical properties, particularly for stretchability. However, there is still some ambiguity about the quantitative dependence of H-bond interactions on the mechanical performance, mainly attributed to the difficulty in the discrimination of various H-bond types. Herein, small molecular chemicals as plasticizers were incorporated into the PVA matrix to tailor the H-bonding interactions. By altering the PVA molecular weight, plasticizer type and loading, both the stretchability and H-bond content were regulated on a large scale. By a combination of DMA, IR spectroscopy, MD simulation and solid-state ¹³C-NMR, every sort of H-bond in PVA was assigned, and their relative fractions were ascertained quantitatively. After correlating the elongation ratio with the relative fraction of the different types of H-bonding interaction, it was found that all the pairs of elongation vs. intermolecular H-bond content derived from different series of PVA/plasticizer films could be plotted into a master curve and exhibited good linearity, indicating that intermolecular H-bonds dominate the mechanical stretchability in PVA films. Our efforts contribute towards an in-depth understanding of performance optimization induced by H-bond manipulation from empirical, phenomenological aspects to intrinsic, numerical insights.

Adsorption properties of heavy metals and antibiotics by chitosan from larvae and adult Trypoxylus dichotomus

Chitosan was prepared by hydrothermal deacetylation from multi-step protein purification chitin based on Trypoxylus dichotomus, for treating heavy metals and antibiotics. Chitosan with higher deacetylation degree and lower molecular weight were synthesized. The adult chitosan was composed of nanofibers arranged more evenly, showing higher yield, thermal stabilities and antimicrobial properties. The adsorption capacities of Cu²⁺ and Fe³⁺ were 462 and 270 mg/g, lower than 934 mg/g of Pb²⁺. Levofloxacin and tetracycline hydrochloride adsorption capacity were 26 and 22 mg/g, lower than 67 mg/g of sulfamethoxazole. In addition, compared with single pollutants, the adsorption of sulfamethoxazole and Pb²⁺ can increase by 6% and 5% when they act as composite contaminants. The adsorption procedure can be well described by pseudo-second-order kinetics and Langmuir isothermal model, indicating it a homogeneous monolayer chemisorption. Therefore, the Trypoxylus dichotomus source chitosan prepared by hydrothermal deacetylation has potential applications in the adsorption of complex pollutants.

Structure and properties of chitosan/sodium dodecyl sulfate composite films

In this study, we investigated the effect of sodium dodecyl sulfate (SDS) content on the structure and properties of chitosan films. It is found that the binding of SDS to chitosan was realized through the interactions between –SO₄⁻ and –NH₃⁺, forming an ionically cross-linked film. Structural analysis revealed that the crystallization was greatly hindered by introducing SDS. With an increase of SDS content, the glass transition temperatures (T_g) of chitosan films increased due to the formation of crosslinks. Compared to pure chitosan film, the composite films had lower content of moisture and possessed better thermal stability. In addition, the mechanical properties of the as-obtained composite films were closely related to the content of SDS, and were significantly improved in the biopolymer films with moderate SDS content. These results indicate that the microstructure as well as properties of the chitosan films can be regulated by adding SDS.

SDS binds strongly to chitosan through electrostatic interactions, and it has a remarkable effect on the structure and properties of chitosan films.

The AEROPILs Generation: Novel Poly(Ionic Liquid)-Based Aerogels for CO2 Capture

CO₂ levels in the atmosphere are increasing exponentially. The current climate change effects motivate an urgent need for new and sustainable materials to capture CO₂. Porous materials are particularly interesting for processes that take place near atmospheric pressure. However, materials design should not only consider the morphology, but also the chemical identity of the CO₂ sorbent to enhance the affinity towards CO₂. Poly(ionic liquid)s (PILs) can enhance CO₂ sorption capacity, but tailoring the porosity is still a challenge. Aerogel’s properties grant production strategies that ensure a porosity control. In this work, we joined both worlds, PILs and aerogels, to produce a sustainable CO₂ sorbent. PIL-chitosan aerogels (AEROPILs) in the form of beads were successfully obtained with high porosity (94.6–97.0%) and surface areas (270–744 m²/g). AEROPILs were applied for the first time as CO₂ sorbents. The combination of PILs with chitosan aerogels generally increased the CO₂ sorption capability of these materials, being the maximum CO₂ capture capacity obtained (0.70 mmol g⁻¹, at 25 °C and 1 bar) for the CHT:P[DADMA]Cl_30%AEROPIL.

Porous membranes of quaternized chitosan composited with strontium-based nanobioceramic for periodontal tissue regeneration

This report demonstrates the development of a degradable quaternary ammonium derivative of chitosan (QC) composited with strontium-containing nanoapatite (SA) for bioactivity. The material was made as porous membrane by solution casting and freeze drying, for guided tissue regeneration (GTR) applications. The micromorphology, tensile strength, suture pull-out strength, degradation (in vitro, in phosphate buffered saline), and cytocompatibility (using human periodontal ligament cells) were tested to investigate the effect of derivatization and SA addition. The porosity of the membranes increased with increasing SA content and so did the tensile strength and the degradation. The suture pull-out strength, however, showed a decrease. The cell culture evaluation endorsed biocompatibility. The composite with 1.5 mg SA per 1 mL QC was found to have optimal qualities for GTR applications.

Evaluation of the Thermal and Morphological Properties of γ-Irradiated Chitosan-Glycerol-Based Polymeric Films

Industry-sponsored research has intensified to find suitable substitutes for synthetic polymers. For this purpose, biopolymers are promising materials that are extracted from renewable resources. However, there are areas of concern (biopolymers are mostly brittle in the dry state) that require further research before they are used in advanced applications. To overcome this, plasticizers are often added to biopolymers to enhance their physicochemical properties. In this study, chitosan (CH)-glycerol (GL)-based polymeric films were prepared by a simple drop-casting technique, and the influence of a plasticizer (GL) on the properties of chitosan films was analyzed. Additionally, the as-prepared samples were irradiated with γ-rays (60Co γ rays with a dose of 102 kGy) to study the effect of γ-irradiation on the properties of polymeric composites. To achieve this, different samples were prepared by varying the amount of GL. FT-IR analysis revealed the interruption of hydrogen bonding in chitosan by the incorporation of GL. This led to the chain-spreading of CH, which ultimately increased the flexibility of the composite films (CH-GL). The DSC of the CH film showed two peaks: one endothermic peak below 100 °C (due to water vapor) and a second exothermic peak that appeared between 130 and 360 °C (degradation of the amino group). Plasticization of CH films with GL was confirmed by DSC, where the exothermic degradation was converted into an endothermic peak. Depending upon the amount of GL, γ-irradiation considerably affected the chemical structure of CH by breaking the carbohydrate and pyranose rings; this led to a decrease in the crystallinity of the composite films. The changes studied in the DSC and TGA analysis complemented each other. γ-irradiation also affected the morphology of the films, which changed from smooth and homogeneous to roasted structures, with random swelling on the surface of the films. This swelling reflected the degradation of the surfaces into thin layers. Considering the changes that occurred in the films post-γ-irradiation, it can be inferred that the irradiation dose of 102 kGy is sufficient to degrade as-prepared biopolymer composites.

Chitosan thermosensitive hydrogels based on lyophilizate powders demonstrate significant potential for clinical use in endoscopic submucosal dissection procedures

The goal of this study was to develop intraoperative biomaterials for use in endoscopic submucosal dissection (ESD) procedures that are stable during storage, easy to use, and effective in clinical practice. Therefore, injectable thermosensitive hydrogels were developed based on lactobionic acid-modified chitosan/chitosan/β-glycerophosphate (CSLA/CS/GP) hydrogel lyophilizate powders, and their properties were compared with original hydrogels that had not been freeze-dried. The results indicated that the lyophilizate powders retained their thermosensitive properties, and gels could be formed within 5 min at 37 °C. Compared to the original hydrogels, the injectability of the hydrogels derived from lyophilizate powders increased significantly. These novel materials maintained their original porous network lamellar structure but exhibited improved mechanical strength and tissue adhesion. Their application with L929 and GES-1 cells revealed that the lyophilizate powder hydrogels demonstrated good cytocompatibility and clearly protected the cells in an acidic environment. The results of submucosal injection experiments involving porcine stomach tissue indicated that the heights of the cushions created by CSLA/CS/GP lyophilizate powder hydrogels lasted longer than those generated with normal saline. The thermosensitive hydrogels based on lyophilizate powders may contribute to practical clinical applications involving ESD, and may also have potential value for other applications in the digestive tract.

Molecular features of the interaction and antimicrobial activity of chitosan in a solution containing sodium dodecyl sulfate

Molecular interaction of chitosan with sodium dodecyl sulfate (SDS) is a more complicated process than it has been imagined so far. For the first time it has been shown that the shorter chitosan chains are, the more preferably they interact with the SDS and the larger-in-size microparticles they form. The influence of ionic strength, urea and temperature on microparticles formation allows interpreting the mechanism of microparticles formation as a cooperative electrostatic interaction between SDS and chitosan with simultaneous decrease in the surface charge of the complexes initiating the aggregation of microparticles. It is shown that hydrogen bonding is mainly responsible for the aggregation while hydrophobic interaction has a lesser effect. Chitosan demonstrates a high bacteriostatic activity in the presence of SDS in solution and can be promising for preparation of microbiologically stable pharmaceutical hydrocolloids, cosmetic products and chitosan-based Pickering emulsions containing strong anionic surfactants.

Liposomes-in-chitosan hydrogel boosts potential of chlorhexidine in biofilm eradication in vitro

Successful treatment of skin infections requires eradication of biofilms found in up to 90 % of all chronic wounds, causing delayed healing and increased morbidity. We hypothesized that chitosan hydrogel boosts the activity of liposomally-associated membrane active antimicrobials (MAA) and could potentially improve bacterial and biofilm eradication. Therefore, liposomes (∼300 nm) bearing chlorhexidine (CHX; ∼50 μg/mg lipid) as a model MAA were incorporated into chitosan hydrogel. The novel CHX-liposomes-in-hydrogel formulation was optimized for skin therapy. It significantly inhibited the production of nitric oxide (NO) in lipopolysaccharide (LPS)-induced macrophage and almost completely reduced biofilm formation. Moreover, it reduced Staphylococcus aureus and Pseudomonas aeruginosa adherent bacterial cells in biofilm by 64.2-98.1 %. Chitosan hydrogel boosted the anti-inflammatory and antimicrobial properties of CHX.

Cryogenically printed flexible chitosan/bioglass scaffolds with stable and hierarchical porous structures for wound healing

Wound healing is a dynamic and well-orchestrated process that can be promoted by creating an optimal environment with wound dressing. An ideal wound dressing material should possess a suitable matrix, structure and bioactive components, functioning synergistically to accelerate wound healing. Wound dressings that allow reproducibility and customizability are highly desirable in clinical practice. In this study, using chitosan (CS) as the matrix and bioglass (BG) as the biological component, a spatially designed dressing scaffold was fabricated from a home-made cryogenic printing system. The micro- and macro-structures of the scaffold were highly controllable and reproducible. The printed scaffold exhibited interconnected and hierarchical pore structures, as well as good flexibility and water absorption capacity, and these properties were not affected by the content of BG. Nevertheless, when the content of BGs exceeded 20% that of CS, the tension strength and elongation rate reduced, but in vitro antibacterial, cell proliferation and migration performance were enhanced. In vivo examinations revealed that the composite scaffold significantly promoted wound healing process, with the group having 30% bioglass showing better wound closure, neovascularization and collagen deposition than other groups. These results indicate that the 3D printed CS/BG composite scaffold is a promising dressing material that accelerates wound healing.

Networks of High Aspect Ratio Particles to Direct Colloidal Assembly Dynamics and Cellular Interactions

Injectable colloids that self-assemble into three-dimensional networks are promising materials for applications in regenerative engineering, as they create open systems for cellular infiltration, interaction, and activation. However, most injectable colloids have spherical morphologies, which lack the high material-biology contact areas afforded by higher aspect ratio materials. To address this need, injectable high aspect ratio particles (HARPs) were developed that form three-dimensional networks to enhance scaffold assembly dynamics and cellular interactions. HARPs were functionalized for tunable surface charge through layer-by-layer electrostatic assembly. Positively charged Chitosan-HARPs had improved particle suspension dynamics when compared to spherical particles or negatively charged HARPs. Chit-HARPs were used to improve the suspension dynamics and viability of MIN6 cells in three-dimensional networks. When combined with negatively charged gelatin microsphere (GelMS) porogens, Chit-HARPs reduced GelMS sedimentation and increased overall network suspension, due to a combination of HARP network formation and electrostatic interactions. Lastly, HARPs were functionalized with fibroblast growth factor 2 (FGF2) to highlight their use for growth factor delivery. FGF2-HARPs increased fibroblast proliferation through a combination of 3D scaffold assembly and growth factor delivery. Taken together, these studies demonstrate the development and diverse uses of high aspect ratio particles as tunable injectable scaffolds for applications in regenerative engineering.

Vibrational spectra analysis of amorphous lactose in structural transformation: Water/temperature plasticization, crystal formation, and molecular mobility

Lactose is a common component found in many foods and dairy products. In this study, the vibrational signatures in the crystalline structure of α-, β-, and α-lactose monohydrate were calculated based on quantum chemistry calculation (QCC), whilst the vibrational spectra in freeze-dried lactose equilibrated at various a_w and pre-humidified amorphous lactose (0.33 a_w) stored from 25 to 95 °C were determined by using Raman and FT-IR spectroscopies. The vibrational signatures of crystalline lactose were affected by the presence of water according to QCC results. Water plasticization, involving water insertion, exposure of H-bonding sites, and structure disruption, was accelerated by storage temperature based on Raman and FT-IR spectra analysis. Raman spectra indicated that the crystal formation of lactose was affected by a_w and storage temperature. Moreover, the spectral changes assigned in OH group provided useful information for determining the critical a_w or temperature when T_g-related molecular mobility occurred in lactose-containing products.