Alginate-chitosan oligosaccharide-ZnO composite hydrogel for accelerating wound healing

Enhancing post-harvest quality of tomato fruits with chitosan oligosaccharide-zinc oxide nanocomposites: A study on biocompatibility, quality improvement, and carotenoid enhancement

In this study, a new composite with combination of chitosan oligosaccharide (COS) and zinc oxide nanoparticles (ZnO NPs), termed Chitosan Oligosaccharide-Zinc Oxide Nanocomposites (COS-ZnO NC), was designed to enhance the quality of tomato fruits during postharvest storage. SEM analysis showed a uniform distribution of COS-ZnO NC films on tomato surfaces, indicating high biocompatibility, while the FTIR spectrum confirmed the interaction of COS and ZnO NPs via hydrogen bonds. The COS-ZnO NC exerts positive effects on post-harvest quality of tomato fruits, including significantly reduced water loss, fewer skin wrinkles, increased sugar-acid ratio, and enhanced vitamin C and carotenoids accumulation. Furthermore, COS-ZnO NC induces transcription of carotenoid biosynthesis genes and promotes carotenoids storage in the chromoplast. These results suggest that the COS-ZnO NC film can significantly improve the quality traits of tomato fruits, and therefore is potential in post-harvest storage of tomato fruits.

Mg-Sr-Ca containing bioactive glass nanoparticles hydrogel modified mineralized collagen scaffold for bone repair

The aim of this study is to explore the therapeutic effects of Mg-Sr-Ca containing bioactive glass nanoparticles sodium alginate hydrogel modified mineralized collagen scaffold (Mg-Sr-Ca-BGNs-SA-MC) on the repair of osteoporotic bone defect. During the study, Mg-Sr-Ca containing bioactive glass nanoparticles (Mg-Sr-Ca-BGNs) were synthesized using the sol-gel method, and the Mg-Sr-Ca-BGNs-SA-MC scaffold was synthesized by a simple method. The Mg-Sr-Ca-BGNs and the Mg-Sr-Ca-BGNs-SA-MC scaffold were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The elements of Mg, Sr, Ca and Si were effectively integrated into Mg-Sr-Ca-BGNs. SEM analysis revealed the presence of Mg-Sr-Ca-BGNs on the scaffold's surface. Furthermore, the cytotoxicity of the scaffolds were assessed using a live/dead assay. The result of the live/dead assay demonstrated that the scaffold materials were non-toxic to cell growth. More importantly, the in vivo study indicated that implanted scaffold promoted tissue regeneration and integration with newly formed bone. Overall, the Mg-Sr-Ca-BGNs-SA-MC scaffold is suitable for guided bone regeneration and beneficial to repair of osteoporotic bone defects.

Adhesive Nanoparticle-in-Microgel System with ROS Scavenging Capability and Hemostatic Activity for Postoperative Adhesion Prevention

Postoperative adhesion is a noteworthy clinical complication in abdominal surgery due to the existing physical barriers are unsatisfactory and inefficient in preventing its occurrence. In this work, an elaborate nanoparticle-in-microgel system (nMGel) is presented for postoperative adhesion prevention. nMGel is facilely formed by crosslinking manganese dioxide (MnO2) nanoparticles-loaded gelatin microspheres with polydopamine using a modified emulsification-chemical crosslinking method, generating a nano-micron spherical hydrogel. After drying, powdery nMGel with sprayability can perfectly cover irregular wounds and maintains robust tissue adhesiveness even in a wet environment. Additionally, nMGel possesses prominent antioxidant and free radical scavenging activity, which protects cell viability and preserves cell biological functions in an oxidative microenvironment. Furthermore, nMGel displays superior hemostatic property as demonstrated in mouse tail amputation models and liver trauma models. Importantly, nMGel can be conveniently administrated in a mouse cecal defect model to prevent adhesion between the injured cecum and the peritoneum by reducing inflammation, oxidative stress, collagen synthesis, and angiogenesis. Thus, the bioactive nMGel offers a practical and efficient approach for ameliorating postsurgical adhesion.

Gelatin‑sodium alginate composite hydrogel doped with black phosphorus@ZnO heterojunction for cutaneous wound healing with antibacterial, immunomodulatory, and angiogenic properties

Hydrogels with novel antimicrobial properties and accelerated wound healing are of great interest in the field of wound dressings because they not only prevent bacterial infections but also fulfill the essential needs of wound healing. In this study, multifunctional hydrogel dressings consisting of black phosphorus nanosheets(BPNS) surface-modified Zinc oxide (BP@ZnO heterojunction) based on gelatin (Gel), sodium alginate (SA), glutamine transferase (mTG), and calcium ions with a three-dimensional crosslinked network were prepared. The BP@ZnO-Gel/SA hydrogel has excellent mechanical properties, hemocompatibility (hemolysis rate: 3.29 %), swelling rate(832.8 ± 19.2 %), cytocompatibility, photothermal and photodynamic antibacterial properties(Sterilization rate: 96.4 ± 3.3 %). In addition, the hydrogel accelerates wound healing by promoting cell migration, immune regulation and angiogenesis. Thus, this hydrogel achieves the triple effect of antimicrobial, immunomodulation and angiogenesis, and is a tissue engineering strategy with great potential.

Bioactive Metal Ion-Coordinated Dynamic Hydrogel with Antibacterial, Immunomodulatory, and Angiogenic Activities for Infected Wound Repair

The repair of infected wounds is a complex physiopathologic process. Current studies on infected wound treatment have predominantly focused on infection treatment, while the factors related to delayed healing caused by vascular damage and immune imbalance are commonly overlooked. In this study, an extracellular matrix (ECM)-like dynamic and multifunctional hyaluronic acid (HA) hydrogel with antimicrobial, immunomodulatory, and angiogenic capabilities was designed as wound dressing for the treatment of infected skin wounds. The dynamic network in the hydrogel dressing was based on reversible metal-ligand coordination formed between sulfhydryl groups and bioactive metal ions. In our design, antibacterial silver and immunomodulatory zinc ions were employed to coordinate with sulfhydrylated HA and a vasculogenic peptide. In addition to the desired bioactivities for infected wounds, the hydrogel could also exhibit self-healing and injectable abilities. Animal experiments with infected skin wound models indicated that the hydrogel dressings enabled minimally invasive injection and seamless skin wound covering and then facilitated wound healing by efficient bacterial killing, continuous inflammation inhibition, and improved blood vessel formation. In conclusion, the metal ion-coordinated hydrogels with wound-infection-desired bioactivities and ECM-like dynamic structures represent a class of tissue bionic wound dressings for the treatment of infected and chronic inflammation wounds.

A comprehensive review on crosslinked network systems of zinc oxide-organic polymer composites

In recent years, the synergistic crosslinked networks formed by zinc oxide (ZnO) particles and organic polymers have gained significant attention. This importance is ascribed due to the valuable combination of low band gap containing ZnO particles with responsive behavior containing organic polymers. These properties of both ZnO and organic polymers make a suitable system of crosslinked ZnO-organic polymer composite (CZOPC) for various applications in the fields of biomedicine, catalysis, and environmental perspectives. The literature extensively provided the diverse morphologies and structures of CZOPC, and these architectural structures play a crucial role in determining their efficiency across various applications. Consequently, the careful design of CZOPC shapes tailored to specific purposes has become a focal point. This comprehensive review provides insights into the classifications, synthetic approaches, characterizations, and applications of ZnO particles decorated in organic polymers with crosslinked network. The exploration extends to the adsorption, environmental, catalytic, and biomedical applications of ZnO-organic polymer composites. Adopting a tutorial approach, the review systematically investigates and elucidates the applications of CZOPC with a comprehensive understanding of their diverse capabilities and uses.

Self-Healing Conductive Hydrogels with Dynamic Dual Network Structure Accelerate Infected Wound Healing via Photothermal Antimicrobial and Regulating Inflammatory Response

Wound infections are an escalating clinical challenge with continuous inflammatory response and the threat of drug-resistant bacteria. Herein, a series of self-healing conductive hydrogels were designed based on carboxymethyl chitosan/oxidized sodium alginate/polymerized gallic acid/Fe3+ (CMC/OSA/pGA/Fe3+, COGFe) for promoting infected wound healing. The Schiff base and catechol-Fe3+ chelation in the dynamical dual network structure of the hydrogels endowed dressings with good toughness, conductivity, adhesion, and self-healing properties, thus flexibly adapting to the deformation of skin wounds. In terms of ultraviolet (UV) resistance and scavenging of reactive oxygen species (ROS), the hydrogels significantly reduced oxidative stress at the wound site. Additionally, the hydrogels with photothermal therapy (PTT) achieved a 95% bactericidal rate in 5 min of near-infrared (NIR) light radiation by disrupting the bacterial cell membrane structure through elevated temperature. Meanwhile, the inherent antimicrobial properties of GA could reduce healthy tissue damage caused by excessive heat. The composite hydrogels could effectively promote the proliferation and migration of fibroblasts and possess good biocompatibility and hemostatic effect. In full-thickness infected wound repair experiments in rats, the COGFe5 hydrogel combined with NIR effectively killed bacteria, modulated macrophage polarization (M1 to M2 phenotype) to improve the immune microenvironment of the wound, and shortened the repair time by accelerating the expression of collagen deposition (TGF-β) and vascular factors (CD31). This combined therapy might provide a prospective strategy for infectious wound treatment.

How the combination of alginate and chitosan can fabricate a hydrogel with favorable properties for wound healing

Wound management has always been a significant concern, particularly for men, and the search for effective wound dressings has led to the emergence of hydrogels as a promising solution. In recent years, hydrogels, with their unique properties, have gained considerable importance in wound management. Among the various types of hydrogels, those incorporating chitosan and alginate, two distinct chemical materials, have shown potential in accelerating wound healing. This review aims to discuss the desirable characteristics of an effective wound dressing, explore the alginate/chitosan-based hydrogels developed by different researchers, and analyze their effects on wound healing through in vitro and in vivo assessments. In vitro tests encompass a wide range of evaluations, including swelling capacity, degradation rate, porosity, Fourier Transform Infrared Spectroscopy, X-ray diffraction analysis, moisture vapor transmission rate, release studies, mechanical properties, microscopic observation, antibacterial properties, compatibility assessment, cell adhesion investigation, blood clotting capability, cell migration analysis, water contact angle determination, and structural stability. Furthermore, in vivo assessments encompass the examination of wound closure rate, modulation of gene expression, as well as histopathological and immunohistochemical studies.

In situ fabricated ZnO nanostructures within carboxymethyl cellulose-based ternary hydrogels for wound healing applications

Zinc oxide nanostructures (ZnO NS) were fabricated in situ within a ternary hydrogel system composed of carboxymethyl cellulose-agarose-polyvinylpyrrolidone (CAP@ZnO TNCHs) by a one-pot method employing moist-heat solution casting. The percentages of CMC and ZnO NS were varied in the CAP hydrogel films and then they were investigated by different techniques, such as ATR/FTIR, TGA, XRD, XPS, and FE-SEM analysis. Furthermore, the mechanical properties, hydrophilicity, swelling, porosity, and antibacterial activity of the CAP@ZnO TNCHs were studied. In-vitro biocompatibility assays were performed with skin fibroblast (CCD-986sk) cells. In-vitro culture of CCD-986sk fibroblasts showed that the ZnO NS facilitated cell adhesion and proliferation. Furthermore, the application of CAP@ZnO TNCHs enhanced cellular interactions and physico-chemical, antibacterial bacterial, and biological performance relative to unmodified CAP hydrogels. Also, an in vivo wound healing study verified that the CAP@ZnO TNCHs promoted wound healing significantly within 18 days, an effect superior to that of unmodified CAP hydrogels. Hence, these newly developed cellulose-based ZnO TNCHs are promising materials for wound healing applications.

A ginsenoside G-Rg3 PEGylated Long-Circulating liposome for hyperglycemia and insulin resistance therapy in Streptozotocin-Induced type 2 diabetes mice

Ginsenoside (GS), one of the main active components in ginseng, can enhance insulin sensitivity, improve the function of islet β cells, and reduce cell apoptosis in the treatment of diabetes. However, the drawbacks of high lipid solubility, poor water solubility, and low oral availability in Ginsenoside Rg3 (G-Rg3) seriously limit further application of GS. In this work, a G-Rg3 PEGylated long-circulating liposome (PEG-L-Rg3) is designed and developed to improve symptoms in type 2 diabetic mice. The as-prepared PEG-L-Rg3 with a spherical structure shows a particle size of ∼ 140.5 ± 1.4 nm, the zeta potential of -0.10 ± 0.05 mV, and a high encapsulation rate of 99.8 %. Notably, in vivo experimental results demonstrate that PEG-L-Rg3 exhibits efficient ability to improve body weight and food intake in streptozotocin-induced type 2 diabetic mice. Moreover, PEG-L-Rg3 also enhances fasting insulin (FINS) and insulin sensitivity index (ISI). In addition, the glucose tolerance of mice is significantly improved after the treatment of PEG-L-Rg3, indicating that PEG-L-Rg3 can be a potential drug for the treatment of type 2 diabetes, which provides a new way for the treatment of type 2 diabetes using ginsenosides.

Immunotherapeutic hydrogel for co-delivery of STAT3 siRNA liposomes and lidocaine hydrochloride for postoperative comprehensive management of NSCLC in a single application

Despite standard treatment for non-small cell lung cancer (NSCLC) being surgical resection, cancer recurrence and complications, such as induction of malignant pleural effusion (MPE) and significant postoperative pain, usually result in treatment failure. In this study, an alginate-based hybrid hydrogel (SOG) is developed that can be injected into the resection surface of the lungs during surgery. Briefly, endoplasmic reticulum-modified liposomes (MSLs) pre-loaded with the signal transducer and activator of transcription 3 (STAT3) small interfering RNA and lidocaine hydrochloride are encapsulated in SOG. Once applied, MSLs strongly downregulated STAT3 expression in the tumor microenvironment, resulting in the apoptosis of lung cancer cells and polarization of tumor-associated macrophages towards the M1-like phenotype. Meanwhile, the release of lidocaine hydrochloride (LID) was beneficial for pain relief and natural killer cell activation. Our data demonstrated MSL@LID@SOG not only efficiently inhibited tumor growth but also potently improved the quality of life, including reduced MPE volume and pain relief in orthotopic NSCLC mouse models, even with a single administration. MSL@LID@SOG shows potential for comprehensive clinical management upon tumor resection in NSCLC, and may alter the treatment paradigms for other cancers.

A Photo-induced Cross-Linking Enhanced A and B Combined Multi-Functional Spray Hydrogel Instantly Protects and Promotes of Irregular Dynamic Wound Healing

Wounds in harsh environments can face long-term inflammation and persistent infection, which can slow healing. Wound spray is a product that can be rapidly applied to large and irregularly dynamic wounds, and can quickly form a protective film in situ to inhibit external environmental infection. In this study, a biodegradable A and B combined multi-functional spray hydrogel is developed with methacrylate-modified chitosan (CSMA1st) and ferulic acid (FA) as type A raw materials and oxidized Bletilla striata polysaccharide (OBSP) as type B raw materials. The precursor CSMA1st-FA/OBSP (CSOB-FA1st) hydrogel is formed by the self-cross-linking of dynamic Schiff base bonds, the CSMA-FA/OBSP (CSOB-FA) hydrogel is formed quickly after UV-vis light, so that the hydrogel fits with the wound. Rapid spraying and curing provide sufficient flexibility and rapidity for wounds and the hydrogel has good injectability, adhesive, and mechanical strength. In rats and miniature pigs, the A and B combined spray hydrogel can shrink wounds and promote healing of infected wounds, and promote the enrichment of fibrocyte populations. Therefore, the multifunctional spray hydrogel combined with A and B can protect irregular dynamic wounds, prevent wound infection and secondary injury, and be used for safe and effective wound treatment, which has a good prospect for development.

Advances in the preparation, characterization, and biological functions of chitosan oligosaccharide derivatives: A review

Chitosan oligosaccharide (COS), which represent the positively charged basic amino oligosaccharide in nature, is the deacetylated and degraded products of chitin. COS has become the focus of intensive scientific investigation, with a growing body of practical and clinical studies highlighting its remarkable health-enhancing benefits. These effects encompass a wide range of properties, including antibacterial, antioxidant, anti-inflammatory, and anti-tumor activities. With the rapid advancements in chemical modification technology for oligosaccharides, many COS derivatives have been synthesized and investigated. These newly developed derivatives possess more stable chemical structures, improved biological activities, and find applications across a broader spectrum of fields. Given the recent interest in the chemical modification of COS, this comprehensive review seeks to consolidate knowledge regarding the preparation methods for COS derivatives, alongside discussions on their structural characterization. Additionally, various biological activities of COS derivatives have been discussed in detail. Lastly, the potential applications of COS derivatives in biomedicine have been reviewed and presented.

Multifunctional polysaccharide/metal/polyphenol double-crosslinked hydrogel for infected wound

Bacterial-infected wounds present a significant challenge in the medical field, posing a severe threat to public health. Traditional wound dressings have limited efficacy in treating bacterial-infected wounds, and antibiotics suffer from cytotoxicity and drug resistance. Consequently, an urgent requirement exists for developing multifunctional wound dressings capable of providing superior antimicrobial activity and expediting wound repair. In recent years, chitosan-based natural polysaccharide hydrogels have garnered attention for their biocompatibility, antimicrobial properties, and ability to aid in hemostasis. This study presents the development of a multi-functional, bi-dynamic network hydrogel for the treatment of wounds infected with bacteria. The hydrogel consists of a backbone of chitosan grafted with chlorogenic acid (CA-ECS), oxidized pullulan polysaccharides (OP), and zinc ions (Zn2+). The CA-ECS/OP/Zn2+ hydrogel displayed strong adhesion, good injectability, and high mechanical strength and was biodegradable and biocompatible. Furthermore, adding Zn2+ and CA enhanced the hydrogel's mechanical properties and antioxidant and antimicrobial activities. In a rat model of full-thickness skin wounds infected with S. aureus, the CA-ECS/OP/Zn2+ hydrogel demonstrated great anti-inflammatory, angiogenic, and folliculogenic properties, resulting in accelerated wound healing. The CA-ECS/OP/Zn2+ hydrogel has great potential for treating bacterial-infected wounds.

Biological scaffold as potential platforms for stem cells: Current development and applications in wound healing

Wound repair is a complex challenge for both clinical practitioners and researchers. Conventional approaches for wound repair have several limitations. Stem cell-based therapy has emerged as a novel strategy to address this issue, exhibiting significant potential for enhancing wound healing rates, improving wound quality, and promoting skin regeneration. However, the use of stem cells in skin regeneration presents several challenges. Recently, stem cells and biomaterials have been identified as crucial components of the wound-healing process. Combination therapy involving the development of biocompatible scaffolds, accompanying cells, multiple biological factors, and structures resembling the natural extracellular matrix (ECM) has gained considerable attention. Biological scaffolds encompass a range of biomaterials that serve as platforms for seeding stem cells, providing them with an environment conducive to growth, similar to that of the ECM. These scaffolds facilitate the delivery and application of stem cells for tissue regeneration and wound healing. This article provides a comprehensive review of the current developments and applications of biological scaffolds for stem cells in wound healing, emphasizing their capacity to facilitate stem cell adhesion, proliferation, differentiation, and paracrine functions. Additionally, we identify the pivotal characteristics of the scaffolds that contribute to enhanced cellular activity.

A whole-course-repair system based on ROS/glucose stimuli-responsive EGCG release and tunable mechanical property for efficient treatment of chronic periodontitis in diabetic rats

Elevated glucose levels, multiple pro-inflammatory cytokines and the generation of excessive reactive oxygen species (ROS) are pivotal characteristics within the microenvironments of chronic periodontitis with diabetes mellitus (CPDM). Control of inflammation and modulation of immune system are required in the initial phase of CPDM treatment, while late severe periodontitis requires a suitable scaffold to promote osteogenesis, rebuild periodontal tissue and reduce alveolar bone resorption. Herein, a whole-course-repair system is introduced by an injectable hydrogel using phenylboronic acid functionalized oxidized sodium alginate (OSA-PBA) and carboxymethyl chitosan (CMC). Epigallocatechin-3-gallate (EGCG) was loaded to simultaneously adjust the mechanical property of the OSA-PBA/CMC + EGCG hydrogel (OPCE). This hydrogel has distinctive adaptability, injectability, and ROS/glucose-triggered release of EGCG, making it an ideal drug delivery carrier. As expected, OPCE hydrogel shows favourable antioxidant and anti-inflammatory properties, along with a regulatory influence on the phenotypic transition of macrophages, providing a favourable immune microenvironment. Apart from that, it provides a favourable mechanical support for osteoblast/osteoclast differentiation regulation at the late proliferation stage of periodontal regeneration. The practical therapeutic effects of OPCE hydrogels were also confirmed when applied for treating periodontitis in diabetic rats. In summary, OPCE hydrogel may be a promising whole-course-repair system for the treatment of CPDM.

High Tensile, Antibacterial, and Conductive Hydrogel Sensor with Multiple Cross-Linked Networks Based on PVA/Sodium Alginate/Zinc Oxide

Hydrogel sensors have attracted a lot of attention due to their great significance for biosensors and human detection, especially their antibacterial properties when in direct contact with the human body. However, it is challenging to improve mechanical and antibacterial performance simultaneously. In this study, by using ultrasonic dispersion technology to attach zinc oxide to cellulose and adding sodium alginate, a multiple cross-linking network is generated, which effectively solves this problem. The proposed poly(vinyl alcohol)/sodium alginate/zinc oxide/hydrogel sensor exhibits not only excellent biocompatibility but also high tensile properties (strain above 2000%). Besides, the sensor also has an antibacterial function (against Escherichia coli and Staphylococcus aureus). The hydrogel acts as a strain sensor and biosensor; it can also be used as a human health detection sensor; its high tensile properties can detect large tensile deformation and small changes in force, such as finger bending, knee bending, and other joint movements, and can also be used as a sound detection sensor to detect speech and breathing. This study provides a simple method to prepare hydrogel sensors that can be useful for human health detection and biosensor development.

Double network self-healing hydrogels based on carboxyethyl chitosan/oxidized sodium alginate/Ca2+: Preparation, characterization and application in dye absorption

This paper presents the formation of a self-healing hydrogel prepared by carboxyethyl modification of chitosan and crosslinking with oxidized sodium alginate. Concurrently, the incorporation of Ca2+ facilitated the formation of "calcium bridges" through intricate coordination with carboxyl moieties, bolstering the attributes of the hydrogel. Various characterization methods, including scanning electron microscopy, texture analysis, and rheological measurements, demonstrated that the introduction of carboxyethyl groups resulted in a more compact hydrogel network structure and improved the hardness and elasticity. The addition of Ca2+ helped to further enhance the mechanical performance of the hydrogel and increase its thermal stability. Then, the adsorption capacity was also investigated, showing adsorption capacities of 46.17 mg/g methylene blue and 46.44 mg/g congo red for carboxyethyl chitosan/oxidized sodium alginate hydrogel, a four-fold increase for congo red versus chitosan/oxidized sodium alginate hydrogel. In addition, the adsorption behavior of CEC/OSA/2%Ca2+ hydrogel can be well described by pseudo-second-order kinetic model and Langmuir adsorption isothermal model. Compared to traditional hydrogels, CEC/OSA/2%Ca2+ hydrogel shows superior mechanical strength, enhanced thermal stability, and improved adsorption capacity, which can effectively adsorb not only methylene blue but also congo red. These advancements demonstrate our hydrogel's innovative properties.

Alginate and Chitosan-Based Hydrogel Enhance Antibacterial Agent Activity on Topical Application

Untreated topical infections can become chronic, posing serious health issues. Optimal skin adherence is crucial in addressing such infections. In this context, chitosan and alginate emerge as promising candidates for use as a foundation in the development of topical hydrogels. The aim of this review is to examine the literature on topical hydrogel formulations that use chitosan and alginate as foundations, specifically in the context of topical antibacterial agents. The research methodology involves a literature review by examining articles published in databases such as PubMed, Scopus, ScienceDirect, and Google Scholar. The keywords employed during the research were "Alginate", "Chitosan", "Hydrogel", and "Antibacterial". Chitosan and alginate serve as bases in topical hydrogels to deliver various active ingredients, particularly antibacterial agents, as indicated by the search results. Both have demonstrated significant antibacterial effectiveness, as evidenced by a reduction in bacterial colony counts and an increase in inhibition zones. This strongly supports the idea that chitosan and alginate could be used together to make topical hydrogels that kill bacteria that work well. In conclusion, chitosan and alginate-based hydrogels show great potential in treating bacterial infections on the skin surface. The incorporation of chitosan and alginate into hydrogel formulations aids in retaining antibacterial agents, allowing for their gradual release over an optimal period. Therefore, hydrogels specifically formulated with chitosan and alginate have the potential to serve as a solution to address challenges in the treatment of topical bacterial infections.

Photothermal and Photocatalytic Glycol Chitosan and Polydopamine-Grafted Oxygen Vacancy Bismuth Oxyiodide (BiO1-x I) Nanoparticles for the Diagnosis and Targeted Therapy of Diabetic Wounds

Treatment of diabetic wounds is a significant clinical challenge due to the massive infections caused by bacteria. In this study, multifunctional glycol chitosan and polydopamine-coated BiO1-x I (GPBO) nanoparticles (NPs) with near-infrared (NIR) photothermal and photocatalytic abilities are prepared. When infection occurs, the local microenvironment becomes acidic, and the pH-switchable GPBO can target the bacteria of the wound site. The NIR-assisted GPBO treatment exhibits anti-bacterial effects with fast response, high efficiency, and long duration to Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. GPBO achieves excellent photothermal imaging and CT imaging of the mouse subcutaneous abscess model. With the assistance of NIR irradiation, the GPBO promotes the healing of the diabetic wound model with the effects of anti-bacteria, anti-inflammation, the M2 polarization promotion of macrophages, and angiogenesis. This is the first-time report of nano-sized BiO1-x I. The synthesis and selected application for the imaging and targeted therapy of diabetic wounds are presented. This study offers an example of the NP-assisted precise diagnosis and therapy of bacterial infection diseases.

Gelatin/Polyacrylamide-Based Antimicrobial and Self-Healing Hydrogel Film for Wound Healing Application

In this study, a self-healing, adhesive, and superabsorbent film made of gelatin, poly(acrylamide), and boric acid (GelAA) was successfully synthesized using a free radical reaction mechanism. The optimized film showed a remarkable 2865 ± 42% water absorptivity and also exhibited excellent self-healing behavior. The GelAA films were further loaded with silver nanoclusters (AgNCs) and ursodeoxycholic acid (UDC) (loading efficiency = 10%) to develop UDC/Ag/GelAA films. The loading of AgNCs in UDC/Ag/GelAA films helped in exhibiting 99.99 ± 0.01% antibacterial activity against both Gram-positive and Gram-negative bacteria, making them very effective against bacterial infections. Additionally, UDC/Ag/GelAA films had 77.19 ± 0.52% porosity and showed 90% of UDC release in 30 h, which helps in improving the cell proliferation. Our research provides an easy but highly effective process for synthesizing a hydrogel film, which is an intriguing choice for wound healing applications without the use of antibiotics.

Facile fabrication and biological investigations of metal oxides intercalated in kaolinite clay-based dressing material to improve wound healing ability in nursing care after post-operative period

The present investigation aims to design and development of hybrid zinc oxide (ZnO) and manganese dioxide (MnO2) nanoparticles (NPs) doped-biopolymer matrix-based cost-effective technique for the synthesis of biocompatible Kaolinite/Chitosan (Ka/CS) nanocomposites (NCs) could be used as agents for wound healing due to their efficiency and low toxicity. The crystallite size, phase purity and surface morphology of the synthesised NCs were investigated systemic analytical methods. The results revealed that the metal oxide nanocomposites presented that in rod-crystalline in shape and additionally exhibits that 20-30 nm in size. In vitro antibacterial analyses demonstrates that NCs have significantly improved bactericidal inhibition efficiency when compared to the bare hybrid NPs and polymeric components. The in vitro biocompatibility observation demonstrates that prepared hybrid-NPs encapsulated NCs have enhanced cell survival rate (>90 %), which was established by MTT assay and Live/Dead fluorescence assay methods at different incubation time. The DPPH assay was used to investigate the synergistic effects of prepared dressing materials increased antioxidant activity. Preliminary research indicates that these nanocomposites, ZnO/MnO2 incorporated and decorated with Ka/CS NCs, could be a significant promoter and potential candidate for use as a robust wound healing agent in post-operative nursing care.

Traditional Herb (Moxa) Modified Zinc Oxide Nanosheets for Quick, Efficient and High Tissue Penetration Therapy of Fungal Infection

Fungal infection possesses the characteristics of high invasion depth and easy formation of a biofilm under the skin, which greatly hinders the treatment process. Here, traditional Chinese medicine moxa is carbonized and modified with zinc oxide (ZnO) nanosheets to synthesize carbonized moxa@ZnO (CMZ) with the dual response properties of yellow light (YL) and ultrasound (US) for synergistic antifungal therapy. CMZ with narrow bandgap can respond to long-wavelength YL that is highly safe and helpful for skin repair. Simultaneously, CMZ with a piezoelectric effect can further enhance the photocatalytic efficiency under the stimulation of US with high tissue penetration. Gene mechanism investigation indicates that when exposed to US and YL irradiation, CMZ-based therapy can adjust the expression of genes associated with fungal virulence, metabolic activity, mycelial growth and biofilm development, thus efficaciously eradicating planktonic Candida albicans (C. albicans) and mature biofilm. Importantly, despite the 1.00 cm thick tissue barrier, CMZ can rapidly eliminate 99.9% of C. albicans within 4 min, showing a satisfactory deep fungicidal efficacy. The in vivo therapeutic effect of this strategy is demonstrated in both open wound and deep cutaneous infection tests, speaking of dramatically better efficacy than the traditional fungicide ketoconazole (KTZ).

Biosafe Polydopamine-Decorated MnO2 Nanoparticles with Hemostasis and Antioxidative Properties for Postoperative Adhesion Prevention

Surgical bleeding and cumulative oxidative stress are significant factors in the development of postoperative adhesions, which are always associated with adverse patient outcomes. However, effective strategies for adhesion prevention are currently lacking in clinical practice. In this study, we propose a solution using polydopamine-decorated manganese dioxide nanoparticles (MnO2@PDA) with rapid hemostasis and remarkable antioxidant properties to prevent postsurgical adhesion. The PDA modification provides MnO2@PDA with enhanced tissue adhesiveness and hemocompatibility with negligible hemolysis. Furthermore, MnO2@PDA exhibits impressive antioxidant and free radical scavenging properties, protecting cells from the negative effects of oxidative stress. The hemostatic activity of MnO2@PDA is evaluated in a mouse truncated tail model and a liver injury model, with results demonstrating reduced bleeding time and volume. The in vivo test on a mouse cecal abrasion model shows that MnO2@PDA exhibits excellent antiadhesion properties coupled with alleviated inflammation around the damaged tissue. Therefore, MnO2@PDA, which exhibits high biosafety, rapid hemostasis, and beneficial antioxidant capacity, displays exceptional antiadhesion performance, holding great potential for clinical applications to prevent postoperative adhesion.

Fabrication of bioinspired keratin/sodium alginate based biopolymeric mat loaded with herbal drug and green synthesized zinc oxide nanoparticles as a dual drug antimicrobial wound dressing

Dual drug antibacterial wound dressings with biological materials possess crucial wound healing characteristics including biocompatibility, non-toxicity, degradability, mechanical strength and antibacterial properties. The study focusses on fabricating keratin (K)‑sodium alginate (A) based wound dressings by loading green synthesized zinc oxide nanoparticles (ZnO NPs) using C. roseus (leaf extract) and M. recutita (Chamomile flower part) herbal drug (CH) as a bioactive dual antibacterial wound dressing for the first time. The optimized ZnO NPs and CH exhibits strong physiochemical and electrostatic interactions (FT-IR, XRD and SEM) on the fabricated K-A-CH-ZnO biopolymeric mats. Moreover, the tiny porous network of the biopolymeric mat enhances thermal stability, hydrophilicity, mechanical strength and explores the water vapor transmission (2538.07 g/m2/day) and oxygen permeability (7.38 ± 0.31 g/m2) to maintain moist environment and cell-material interactions. During enzymatic degradation studies, ZnO NPs and CH of biopolymeric mat not only retains structural integrity but also increases the characteristic of swelling with sustained drug release (57 %) in 144 h which accelerates wound healing process. Also, K-A-CH-ZnO mat exhibited excellent antibacterial effects against B. subtilis and E. coli. Furthermore, NIH 3T3 fibroblast cell behavior using MTT assay and in vivo evaluations of biopolymeric mat depicted enhanced biocompatibility with increased collagen deposition at the wound site as a prominent dual drug medicated antimicrobial wound dressing.

Comparison of the differentiation of ovine fetal bone-marrow mesenchymal stem cells towards osteocytes on chitosan/alginate/CuO-NPs and chitosan/alginate/FeO-NPs scaffolds

In the current study, the creation of a chitosan/alginate scaffold hydrogel with and without FeO-NPs or CuO-NPs was studied. From fetal ovine bone marrow mesenchymal stem cells (BM-MSCs) were isolated and cultivated. Their differentiation into osteocyte and adipose cells was investigated. Also, on the scaffolds, cytotoxicity and apoptosis were studied. To investigate the differentiation, treatment groups include: (1) BM-MSCs were plated in DMEM culture medium with high glucose containing 10% FBS and antibiotics (negative control); (2) BM-MSCs were plated in osteogenic differentiation medium (positive control); (3) positive control group + FeO-NPs, (4) positive control group + CuO-NPs; (5) BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate scaffold; (6) BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate/FeO-NPs scaffold; and (7) BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate/CuO-NPs scaffold. Alkaline phosphatase enzyme concentrations, mineralization rate using a calcium kit, and mineralization measurement by alizarin staining quantification were evaluated after 21 days of culture. In addition, qRT-PCR was used to assess the expression of the ALP, ColA, and Runx2 genes. When compared to other treatment groups, the addition of CuO-NPs in the chitosan/alginate hydrogel significantly increased the expression of the ColA and Runx2 genes (p < 0.05). However, there was no significant difference between the chitosan/alginate hydrogel groups containing FeO-NPs and CuO-NPs in the expression of the ALP gene. It appears that the addition of nanoparticles, in particular CuO-NPs, has made the chitosan/alginate scaffold more effective in supporting osteocyte differentiation.

High-efficiency antibacterial calcium alginate/lysozyme/AgNPs composite sponge for wound healing

Infection poses a significant barrier to effective wound repair, leading to increased inflammatory responses that ultimately result in incomplete and prolonged wound healing. To address this challenge, numerous antibacterial ingredients have been incorporated into dressings to inhibit wound infection. Our previous work demonstrated that lysozyme/silver nanoparticles (LYZ/AgNPs) complexes, prepared using an eco-friendly one-step aqueous method, exhibited excellent antibacterial efficacy with favorable biosafety. To further explore its potential application in advancing wound healing, calcium alginate (CA) with good porosity, water absorption, and water retention capacities was formulated with LYZ/AgNPs to prepare composite sponge (CA/LYZ/AgNPs). As expected, in vivo experiments involving full-thickness skin wound and scald wound healing experiments demonstrated that CA-LYZ-AgNPs composite sponges with excellent biocompatibility exhibited remarkable antibacterial activity against gram-positive bacteria, gram-negative bacteria and fungi, and outperformed the wound healing process efficacy of other commercially available AgNPs-loaded wound dressings. In summary, this work introduces a CA/LYZ/AgNPs sponge featuring exceptional antibacterial efficacy and biocompatibility, thus holding promising potential in wound care applications.

Chitosan-based Schiff bases: Promising materials for biomedical and industrial applications

There is plenty of scope for modifying chitosan, an only polycationic natural polysaccharide, owing to its reactive functional groups, namely hydroxyl and amino groups. Although innumerable numbers of chitosan derivatives have been synthesized by modifying these groups and reported elsewhere, in this review article, an attempt has been exclusively made to demonstrate the syntheses of various chitosan-based Schiff bases (CSBs) simply by allowing the reactions of reactive amino groups of chitosan with different aldehydes/ketones of interest. Due to their very peculiar and unique characteristics, such as biodegradability, biocompatibility, metal-binding capability, etc., they are found to be very useful for diversified applications. Thus, we have also attempted to showcase their very specific biomedical fields, including tissue engineering, drug delivery, and wound healing, to name a few. In addition, we have also discussed the utilization of CSBs for industrial applications such as wastewater treatment, catalysis, corrosion inhibition, sensors, etc.

Chitosan/alginate scaffold enhanced with Berberis vulgaris extract for osteocyte differentiation of ovine fetal stem cells

Designing biocompatible polymers using plant derivatives can be extremely useful in tissue engineering, nanomedicine, and many other fields of medicine. In this study, it was first looked into how chitosan/alginate scaffolds were made and characterized in the presence of berberine and barberry fruit extract. Second, the process of proliferation and differentiation of ovine fetal BM-MSCs (bone marrow-mesenchymal stem cells) was assessed on these scaffolds after BM-MSCs were extracted and confirmed by developing into osteocyte and adipose cells. To investigate the differentiation, treatment groups include (1) ovine fetal BM-MSCs were plated in Dulbecco's modified eagle medium culture medium with high glucose containing 10% fetal bovine serum and antibiotics (negative control), (2) ovine fetal BM-MSCs were plated in osteogenic differentiation medium (positive control group), (3) positive control group + barberry fruit extract, (4) positive control group + berberine, (5) ovine fetal BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate scaffold (hydrogel group), (6) ovine fetal BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate/barberry fruit extract scaffold (hydrogel group containing barberry fruit extract), and (7) ovine fetal BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate/berberine scaffold (hydrogel group containing berberine). Alkaline phosphatase (ALP) enzyme concentrations, mineralization rate using a calcium kit, and mineralization measurement by alizarin staining quantification were all found after 21 days of culture. In addition, real-time quantitative reverse transcription polymerase chain reaction was used to assess the expression of the ALP, COL1A2, and Runx2 genes. Days 5 and 7 had the lowest water absorption by the hydrogel scaffold containing barberry extract, which was significant in comparison to other groups (p < .05). Among the hydrogel scaffolds under study, the one containing barberry extract exhibited the lowest tensile strength, and this difference was statistically significant (p < .05). The chitosan/alginate hydrogel has the highest tensile strength of all of them. In comparison to the control and other treatment groups, the inclusion of berberine in the chitosan/alginate hydrogel significantly increased the expression of the ALP, Runx2, and COL1A2 genes (p < .05). The osteocyte differentiation of mesenchymal stem cells in in vitro settings appears to have been enhanced by the inclusion of berberine in the chitosan/alginate scaffold.

Recent advances in biopolymer-based hydrogels and their potential biomedical applications

Hydrogels are three-dimensional networks of polymer chains containing large amounts of water in their structure. Hydrogels have received significant attention in biomedical applications owing to their attractive physicochemical properties, including flexibility, softness, biodegradability, and biocompatibility. Different natural and synthetic polymers have been intensely explored in developing hydrogels for the desired applications. Biopolymers-based hydrogels have advantages over synthetic polymers regarding improved cellular activity and weak immune response. These properties can be further improved by grafting with other polymers or adding nanomaterials, and they structurally mimic the living tissue environments, which opens their broad applicability. The hydrogels can be physically or chemically cross-linked depending on the structure. The use of different biopolymers-based hydrogels in biomedical applications has been reviewed and discussed earlier. However, no report is still available to comprehensively introduce the synthesis, advantages, disadvantages, and biomedical applications of biopolymers-based hydrogels from the material point of view. Herein, we systematically overview different synthesis methods of hydrogels and provide a holistic approach to biopolymers-based hydrogels for biomedical applications, especially in bone regeneration, wound healing, drug delivery, bioimaging, and therapy. The current challenges and prospects of biopolymers-based hydrogels are highlighted rationally, giving an insight into the progress of these hydrogels and their practical applications.

Biomolecules based hydrogels and their potential biomedical applications: A comprehensive review

The need for biocompatible drug carriers has been significantly increased from the past few years. Researchers show great interest in the development of more versatile and sophisticated biomaterials based drug carriers. Hydrogels are beneficial drug carriers and easily release the controlled amount of drug at target site due to its tunable structure. The hydrogels made-up of potent biological macromolecules including collagen, gelatin, fibrin, elastin, fibroin, chitosan, starch, alginate, agarose and carrageenan have been proven as versatile biomaterials. These are three-dimensional polymeric networks, synthesized by crosslinking of hydrophilic polymers. The biological macromolecules based hydrogels containing therapeutic substances are used in a wide range of biomedical applications including wound healing, tissue engineering, cosmetics and contact lenses. However, many aspects related to hydrogels such as the mechanism of cross-linking and molecular entanglement are not clear. So, there is a need to do more research and exploration toward the extensive and cost-effective use of hydrogels. The present review article elaborately discusses the biomolecules based hydrogels and their possible biomedical applications in different fields.

Composites based on alginate containing formylphosphazene-crosslinked chitosan and its Cu(II) complex as an antibiotic-free antibacterial hydrogel dressing with enhanced cytocompatibility

Hydrogels based on chitosan or alginate biopolymers are believed to be desirable for covering skin lesions. In this research, we explored the potential of a new composite hydrogels series of sodium alginate (Alg) filled with cross-linked chitosan to use as hydrogel wound dressings. Cross-linked chitosan (CSPN) was synthesized by Schiff-base reaction with aldehydated cyclophosphazene, and its Cu(II) complex was manufactured and identified. Then, their powder suspension and Alg were transformed into hydrogel via ion-crosslinking with Ca2+. The hydrogel constituents were investigated by using FTIR, XRD, rheological techniques, and thermal analysis including TGA (DTG) and DSC. Moreover, structure optimization calculations were performed with the Material Studio 2017 program based on DFT-D per Dmol3 module. Examination of Alg's interactions with CSPN and CSPN-Cu using this module demonstrated that Alg molecules can be well adsorbed to the particle's surface. By changing the dosage of CSPN and CSPN-Cu, the number and size of pores, swelling rate, degradation behavior, protein absorption rate, cytotoxicity and blood compatibility were changed significantly. Subsequently, we employed erythromycin as a model drug to assess the entrapment efficiency, loading capacity, and drug release rate. FITC staining was selected to verify the hydrogels' intracellular uptake. Assuring the cytocompatibility of Alg-based hydrogels was approved by assessing the survival rate of fibroblast cells using MTT assay. However, the presence of Cu(II) in the developed hydrogels caused a significant antibacterial effect, which was comparable to the antibiotic-containing hydrogels. Our findings predict these porous, biodegradable, and mechanically stable hydrogels potentially have a promising future in the wound healing as antibiotic-free antibacterial dressings.

On-demand release of enrofloxacin-loaded chitosan oligosaccharide-oxidized hyaluronic acid composite nanogels for infected wound healing

In this study, enrofloxacin (ENR) was encapsulated by oxidized hyaluronic acid (OHA) containing aldehyde groups and chitosan oligosaccharide (COS) containing amino groups through Schiff's base reaction to achieve on-demand release in the micro-environment (pH 5.5 and HAase) of bacterial-infected wounds (Escherichia coli and Staphylococcus aureus). The formation mechanism, physicochemical characterization, responsive release performance, in vitro and in vivo antimicrobial activities, and in vivo regeneration in full-thickness wounds in a bacterial-infected mouse model of the ENR nanogels were systematically studied. According to the single-factor experiment and Design-Expert software, the optimized formula was 3.8 mg/ml COS, 0.5 mg/ml OHA, and 0.3 mg/ml ENR, respectively. The mean particle diameter, polydispersity index, zeta potential, loading capacity, and encapsulation efficiency were 35.6 ± 1.7 nm, -6.7 ± 0.5 mV, 0.25 ± 0.02, 30.4 % ± 1.3 %, and 76.3 % ± 2.6 %, respectively. The appearance, optical microscopy images, SEM, TEM, PXRD, and FTIR showed that the ENR nanogels were successfully prepared. The ENR nanogels exhibited obvious pH and HAase-responsiveness by swelling ratios and in vitro release and had stronger antibacterial activity with time-dependent and concentration-dependent effects, as well as accelerating infected wound healing. In vitro and in vivo biosafety studies suggested the great promise of ENR nanogels as biocompatible wound dressings for infected wounds.

Marine-derived polysaccharides and their therapeutic potential in wound healing application - A review

Polysaccharides originating from marine sources have been studied as potential material for use in wound dressings because of their desirable characteristics of biocompatibility, biodegradability, and low toxicity. Marine-derived polysaccharides used as wound dressing, provide several benefits such as promoting wound healing by providing a moist environment that facilitates cell migration and proliferation. They can also act as a barrier against external contaminants and provide a protective layer to prevent further damage to the wound. Research studies have shown that marine-derived polysaccharides can be used to develop different types of wound dressings such as hydrogels, films, and fibres. These dressings can be personalised to meet specific requirements based on the type and severity of the wound. For instance, hydrogels can be used for deep wounds to provide a moist environment, while films can be used for superficial wounds to provide a protective barrier. Additionally, these polysaccharides can be modified to improve their properties, such as enhancing their mechanical strength or increasing their ability to release bioactive molecules that can promote wound healing. Overall, marine-derived polysaccharides show great promise for developing effective and safe wound dressings for various wound types.

Fabrication, characterization and potential application of biodegradable polydopamine-modified scaffolds based on natural macromolecules

Sodium alginate (SA)-based implantable scaffolds with slow-release drugs have become increasingly important in the fields of biomedical and tissue engineering. However, high-molecular-weight SA is difficult to remove from the body due to the lack of SA-degrading enzymes. The very slow degradation properties of SA-based scaffolds limit their applications. Herein, we designed a series of biodegradable oxidized SA (OSA)-based scaffolds through amide bonds, imine bonds and hydrogen bridges between OSA and silk fibroin (SF). SF/OSA-0.4 with a blend ratio of 4/1 was chosen for further polydopamine (PDA) surface modification studies through the optimization of those parameters such as different OSA oxidation degrees, and blend ratios. PDA modified SF/OSA-0.4 (Dopa/SF/OSA-0.4) showed the excellent stability, better stretchable properties, a uniform interconnective porous structure, high thermal stability, a low hemolysis ratio and cytotoxicity. In vitro degradation experiments showed that the degradation rate of SF/OSA was significantly higher than that of SF/SA, but the degradation slowed again after PDA modification. Interestingly, the degradation of Dopa/SF/OSA-0.4 in vivo was significantly faster than that in vitro. Dopa/SF/OSA-0.4 was also more conducive to new tissue growth and collagen bundle formation. Moreover, Dopa/SF/OSA-0.4 improved the absorbability of RhB (model drug) and reduced the sudden release of RhB during the sustained release.

An extracellular matrix mimicking alginate hydrogel scaffold manipulates an inflammatory microenvironment and improves peripheral nerve regeneration by controlled melatonin release

Low efficiency of nerve growth and unstable release of loaded drugs have become a major problem in repairing peripheral nerve injury. Many intervention strategies were focused on simple drug loading, but have still been less effective. The key challenge is to establish a controlled release microenvironment to enable adequate nerve regeneration. In this study, we fabricate a multilayered compound nerve scaffold by electrospinning: with an anti-adhesive outer layer of polycaprolactone and an ECM-like inner layer consisting of a melatonin-loaded alginate hydrogel. We characterized the scaffold, and the loaded melatonin can be found to undergo controlled release. We applied them to a 15 mm rat model of sciatic nerve injury. After 16 weeks, the animals in each group were evaluated and compared for recovery of motor function, electrophysiology, target organ atrophy status, regenerative nerve morphology and relative protein expression levels of neural markers, inflammatory oxidative stress, and angiogenesis. We identify that the scaffold can improve functional ability evidenced by an increased sciatic functional index and nerve electrical conduction level. The antioxidant melatonin loaded in the scaffold reduces inflammation and oxidative stress in the reinnervated nerves, confirmed by increased HO-1 and decreased TNF-α levels in regenerating nerves. The relative expression of fast-type myosin was elevated in the target gastrocnemius muscle. An improvement in angiogenesis facilitates neurite extension and axonal sprouting. This scaffold can effectively restore the ECM-like microenvironment and improve the quality of nerve regeneration by controlled melatonin release, thus enlightening the design criteria on nerve scaffolds for peripheral nerve injury in the future.

Photothermal hyaluronic acid composite hydrogel targeting cancer stem cells for inhibiting recurrence and metastasis of breast cancer

Recurrence and metastasis have been recognized as a great challenge in cancer treatment. Cancer stem cells (CSCs), as a small subset of cancer cells, are closely associated with tumor metastasis and recurrence due to their resistance and multi-differentiation characteristics. Herein, we developed a local injectable hyaluronic acid (HA) composite hydrogel (HAAG) that targets CSCs, which can continuously release all-trans retinoic acid (ATRA) and gold nanoparticles (AuNPs) at tumor sites. The composite hydrogel was endowed with the ability to target CSCs through the specific binding of HA to CD44. ATRA was loaded into HA micelles to induce CSCs to differentiate into normal cancer cells, while AuNPs was incorporated into the hydrogel for photothermal therapy (PTT). HAAG exhibited good injectability, photothermal properties and CSCs targeting ability. HAAG not only significantly inhibited the growth of 4T1 mouse breast cancer cells and 4T1-CSCs in vitro, but also effectively inhibited tumor recurrence and metastasis in a 4T1-CSC mouse model in vivo. Our study provides a novel strategy of local differentiation combined with PTT for inhibiting the recurrence and metastasis of breast cancer.

Sprayable Ti3C2 MXene hydrogel for wound healing and drug release system

Wound healing is a critical process that facilitates the body's recovery from injuries and helps prevent infections, thereby maintaining overall tissue and organ functionality. However, delayed wound healing owing to various factors can lead to bacterial infections and secondary complications. In this study, a ciprofloxacin (CIP)-loaded MXene/sodium alginate (SA) hydrogel was fabricated to inhibit bacterial infections and enhance wound healing. The hydrogel was formulated in a sprayable state by blending CIP-loaded MXene (CIP-MX) with SA. This hydrogel was found to exhibit excellent photothermal conversion capability and biocompatibility under near-infrared (NIR) irradiation. In addition, the hydrogel enabled controlled drug release based on NIR irradiation, ultimately enabling improved antibacterial activity. Based on the in vitro and in vivo experiments, the CIP-loaded MXene/SA hydrogel (CIP-MX@Gel) accelerated wound healing. Overall, the CIP-MX@Gel has excellent potential as an effective wound healing material.

Recent advances in chitosan-based materials; The synthesis, modifications and biomedical applications

The attention to polymer-based biomaterials, for instance, chitosan and its derivatives, as well as the techniques for using them in numerous scientific domains, is continuously rising. Chitosan is a decomposable naturally occurring polymeric material that is mostly obtained from seafood waste. Because of its special ecofriendly, biocompatible, non- toxic nature as well as antimicrobial properties, chitosan-based materials have received a lot of interest in the field of biomedical applications. The reactivity of chitosan is mainly because of the amino and hydroxyl groups in its composition, which makes it further fascinating for various uses, including biosensing, textile finishing, antimicrobial wound dressing, tissue engineering, bioimaging, gene, DNA and drug delivery and as a coating material for medical implants. This study is an overview of the different types of chitosan-based materials which now a days have been fabricated by applying different techniques and modifications that include etherification, esterification, crosslinking, graft copolymerization and o-acetylation etc. for hydroxyl groups' processes and acetylation, quaternization, Schiff's base reaction, and grafting for amino groups' reactions. Furthermore, this overview summarizes the literature from recent years related to the important applications of chitosan-based materials (i.e., thin films, nanocomposites or nanoparticles, sponges and hydrogels) in different biomedical applications.

Nature-Derived Polysaccharide-Based Composite Hydrogels for Promoting Wound Healing

Numerous innovative advancements in dressing technology for wound healing have emerged. Among the various types of wound dressings available, hydrogel dressings, structured with a three-dimensional network and composed of predominantly hydrophilic components, are widely used for wound care due to their remarkable capacity to absorb abundant wound exudate, maintain a moisture environment, provide soothing and cooling effects, and mimic the extracellular matrix. Composite hydrogel dressings, one of the evolved dressings, address the limitations of traditional hydrogel dressings by incorporating additional components, including particles, fibers, fabrics, or foams, within the hydrogels, effectively promoting wound treatment and healing. The added elements enhance the features or add specific functionalities of the dressings, such as sensitivity to external factors, adhesiveness, mechanical strength, control over the release of therapeutic agents, antioxidant and antimicrobial properties, and tissue regeneration behavior. They can be categorized as natural or synthetic based on the origin of the main components of the hydrogel network. This review focuses on recent research on developing natural polysaccharide-based composite hydrogel wound dressings. It explores their preparation and composition, the reinforcement materials integrated into hydrogels, and therapeutic agents. Furthermore, it discusses their features and the specific types of wounds where applied.

Double-Layer Hydrogel with Glucose-Activated Two-Stage ROS Regulating Properties for Programmed Diabetic Wound Healing

Slow healing of wounds induces great pain in diabetic patients. However, developing new approaches to promote diabetic wound healing is still one of the toughest challenges in the medical field. Here, we constructed a new double-layer hydrogel to effectively regulate reactive oxygen species (ROS) on the wound and promote diabetic wound healing. The inner layer contains glucose oxidase (Gox), ferrocene-modified quaternary ammonium chitosan (Fc-QCs), and poly(β-cyclodextrin) (Pβ-CD), which is used to generate hydroxyl radicals (•OH) for antibacterial in the early stage of wound healing and collapses gradually. The outer layer is composed of gelatin and dopamine. In the later stage of wound healing, the outer layer contacts the skin, which is beneficial for ROS clearance on the wound. Antibacterial, ROS scavenging, and wound healing experiments have shown that the double-layer hydrogel possesses two-stage ROS regulating properties for programmed diabetic wound healing. In conclusion, it will be one of the most potential dressings for treating diabetic wounds in the future.

Recent advances in nanomaterial-mediated bacterial molecular action and their applications in wound therapy

Because of the multi-pathway antibacterial mechanisms of nanomaterials, they have received widespread attention in wound therapy. However, owing to the complexities of bacterial responses toward nanomaterials, antibacterial molecular mechanisms remain unclear, making it difficult to rationally design highly efficient antibacterial nanomaterials. Fortunately, molecular dynamics simulations and omics techniques have been used as effective methods to further investigate the action targets of nanomaterials. Therefore, the review comprehensively analyzes the antibacterial mechanisms of nanomaterials from the morphology-dependent antibacterial activity and physicochemical/optical properties-dependent antibacterial activity, which provided guidance for constructing excellently efficient and broad-spectrum antibacterial nanomaterials for wound therapy. More importantly, the main molecular action targets of nanomaterials from the membranes, DNA, energy metabolism pathways, oxidative stress defense systems, ribosomes, and biofilms are elaborated in detail. Furthermore, nanomaterials used in wound therapy are reviewed and discussed. Finally, future directions of nanomaterials from mechanisms to nanomedicine are further proposed.

Antibacterial Gelatin Composite Hydrogels Comprised of In Situ Formed Zinc Oxide Nanoparticles

We report the feasibility of using gelatin hydrogel networks as the host for the in situ, environmentally friendly formation of well-dispersed zinc oxide nanoparticles (ZnONPs) and the evaluation of the antibacterial activity of the as-prepared composite hydrogels. The resulting composite hydrogels displayed remarkable biocompatibility and antibacterial activity as compared to those in previous studies, primarily attributed to the uniform distribution of the ZnONPs with sizes smaller than 15 nm within the hydrogel network. In addition, the composite hydrogels exhibited better thermal stability and mechanical properties as well as lower swelling ratios compared to the unloaded counterpart, which could be attributed to the non-covalent interactions between the in situ formed ZnONPs and polypeptide chains. The presence of ZnONPs contributed to the disruption of bacterial cell membranes, the alteration of DNA molecules, and the subsequent release of reactive oxygen species within the bacterial cells. This chain of events culminated in bacterial cell lysis and DNA fragmentation. This research underscores the potential benefits of incorporating antibacterial agents into hydrogels and highlights the significance of preparing antimicrobial agents within gel networks.

TiO2, CeO2, and TiO2-CeO2 nanoparticles incorporated 2.5D chitosan hydrogels: Gelation behavior and cytocompatibility

In this study, gelation behavior and cytocompatibility of 2.5D chitosan hydrogels were investigated in the presence of TiO2, CeO2 and TiO2-CeO2 composite nanoparticles. Chemical co-precipitation method was used for nanoparticle synthesis and they were heat treated at 600 °C and 700 °C. Gelation of the chitosan solutions was carried out at 37 °C in the presence of glycerol phosphate and genipin as crosslinkers. The gelation time of chitosan was decreased by all of the nanoparticles whereas its elastic modulus was increased by nanoparticles addition. Chitosan solutions containing CeO2 or TiO2-CeO2 nanoparticles showed faster gel formation compared to chitosan solutions containing only TiO2 nanoparticles. CeO2@700 °C nanoparticles decreased the gelation time by 46% and increased elastic modulus by 14%. Average pore diameter of the hydrogel decreased from 127 ± 62 μm to 77 ± 33 μm, water uptake decreased 21% and thermal stability increased in the presence of CeO2@700 °C nanoparticles compared to chitosan hydrogel. Cell viability results indicated that chitosan hydrogels with or without nanoparticles created 2.5D environment supporting cellular proliferation approximately 1.5 times more than TCPS due to their high porous surfaces. Immunofluorescence images were also supported cell viability results. Therefore, CeO2 or TiO2-CeO2 composite nanoparticles incorporated 2.5D chitosan hydrogels may be alternative tissue engineering materials with their fast gelation, ease of use, low cost, light transparency, and cytocompatibility.

First-Aid Hydrogel Wound Dressing with Reliable Hemostatic and Antibacterial Capability for Traumatic Injuries

First-aid for severe traumatic injuries in the battlefield or pre-hospital environment, especially for skin defects or visceral rupture, remains a substantial medical challenge even in the context of the rapidly evolving modern medical technology. Hydrogel-based biomaterials are highly anticipated for excellent biocompatibility and bio-functional designability. Yet, inadequate mechanical and bio-adhesion properties limit their clinical application. To address these challenges, a kind of multifunctional hydrogel wound dressing is developed with the collective multi-crosslinking advantages of dynamic covalent bonds, metal-catechol chelation, and hydrogen bonds. The mussel-inspired design and zinc oxide-enhanced cohesion strategy collaboratively reinforce the hydrogel's bio-adhesion in bloody or humoral environments. The pH-sensitive coordinate Zn2+ -catechol bond and dynamic Schiff base with reversible breakage and reformation equip the hydrogel dressing with excellent self-healing and on-demand removal properties. In vivo evaluation in a rat ventricular perforation model and Methicillin-resistant Staphylococcus aureus (MRSA)-infected full-thickness skin defect model reveal excellent hemostatic, antibacterial and pro-healing effectiveness of the hydrogel dressing, demonstrating its great potential in dealing with severe bleeding and infected full-thickness skin wounds.

Thermosensitive Hydrogel-Functionalized Mesoporous Silica Nanoparticles for Parenteral Application of Chemotherapeutics

Hydrogels can offer many opportunities for drug delivery strategies. They can be used on their own, or their benefits can be further exploited in combination with other nanocarriers. Intelligent hydrogels that react to changes in the surrounding environment can be utilized as gatekeepers and provide sustained on-demand drug release. In this study, a hybrid nanosystem for temperature- and pH-sensitive delivery was prepared from MCM-41 nanoparticles grafted with a newly synthesized thermosensitive hydrogel (MCM-41/AA-g-PnVCL). The initial particles were chemically modified by the attachment of carboxyl groups. Later, they were grafted with agar (AA) and vinylcaprolactam (VCL) by free radical polymerization. Doxorubicin was applied as a model hydrophilic chemotherapeutic drug. The successful formulation was confirmed by FT-IR and TGA. Transmission electron microscopy and dynamic light scattering analysis showed small particles with negative zeta potential. Their release behaviour was investigated in vitro in media with different pH and at different temperatures. Under tumour simulating conditions (40 °C and pH 4.0), doxorubicin was almost completely released within 72 h. The biocompatibility of the proposed nanoparticles was demonstrated by in vitro haemolysis assay. These results suggest the possible parenteral application of the newly prepared hydrogel-functionalized mesoporous silica nanoparticles for temperature-sensitive and pH-triggered drug delivery at the tumour site.

Polysaccharide based transdermal patches for chronic wound healing: Recent advances and clinical perspective

Polysaccharides form a major class of natural polymers with diverse applications in biomedical science and tissue engineering. One of the key thrust areas for polysaccharide materials is skin tissue engineering and regeneration, whose market is estimated to reach around 31 billion USD globally by 2030, with a compounded annual growth rate of 10.46 %. Out of this, chronic wound healing and management is a major concern, especially for underdeveloped and developing nations, mainly due to poor access to medical interventions for such societies. Polysaccharide materials have shown promising results and clinical potential in recent decades with regard to chronic wound healing. Their low cost, ease of fabrication, biodegradability, and ability to form hydrogels make them ideal candidates for managing and healing such difficult-to-heal wounds. The present review presents a summary of the recently explored polysaccharide-based transdermal patches for managing and healing chronic wounds. Their efficacy and potency of healing both as active and passive wound dressings are evaluated in several in-vitro and in-vivo models. Finally, their clinical performances and future challenges are summarized to draw a road map towards their role in advanced wound care.

Polysaccharide-based hydrogel promotes skin wound repair and research progress on its repair mechanism

Polysaccharides, being a natural, active, and biodegradable polymer, have garnered significant attention due to their exceptional properties. These properties make them ideal for creating multifunctional hydrogels that can be used as wound dressings for skin injuries. Polysaccharide hydrogel has the ability to both simulate the natural extracellular matrix, promote cell proliferation, and provide a suitable environment for wound healing while protecting it from bacterial invasion. Polysaccharide hydrogels offer a promising solution for repairing damaged skin. This review provides an overview of the mechanisms involved in skin damage repair and emphasizes the potential of polysaccharide hydrogels in this regard. For different skin injuries, polysaccharide hydrogels can play a role in promoting wound healing. However, we still need to conduct more research on polysaccharide hydrogels to provide more possibilities for skin damage repair.

Preparation of carboxymethylcellulose / ZnO / chitosan composite hydrogel microbeads and its drug release behaviour

In this study, a novel carboxymethylcellulose / ZnO / chitosan (CMC / ZnO / Cs) hydrogel microbeads loaded with crosslinked porous starch / curcumin (CPS / Cur) were designed and prepared to improve the encapsulation efficiency of curcumin for drug delivery to specific sites. It was found that the total pore volume of crosslinked porous starch (CPS) was increased by 1150 % when compared to the native starch (NS), and the adsorption ratio of curcumin by CPS was enhanced by 27 % when compared to NS. Secondly, the swelling ratio of composite hydrogel microbeads was within 25 % in an acidic environment at pH 1.2, and the swelling ratio of hydrogel microbeads sharply increased to 320 % ~ 370 % at pH 6.8 and 7.4. In addition, the results of in vitro simulated release experiments showed that the released amount of hydrogel microbeads loaded with NS/Cur and CPS/Cur in SGF were within 7 % in simulated gastric fluid (SGF). The highest released amount of curcumin was 65.26 % for hydrogel beads loaded with CPS/Cur, which was 26 % lower than that of hydrogel microbeads loaded with Cur in simulated intestinal fluid (SIF). In simulated colonic fluid (SCF), the released amount of hydrogel microbeads loaded with CPS/Cur and Cur were 73.96 % and 91.69 %, respectively. In conclusion, pH-sensitive drug delivery system with good drug stability and bioavailability were successfully prepared with carboxymethylcellulose / ZnO / chitosan bead, suitable targeting drug delivery to the small intestine.

Double Network Physical Crosslinked Hydrogel for Healing Skin Wounds: New Formulation Based on Polysaccharides and Zn2

Developing convenient, efficient, and natural wound dressings remain the foremost strategy for treating skin wounds. Thus, we innovatively combined the semi-dissolved acidified sol-gel conversion method with the internal gelation method to fabricate SA (sodium alginate)/CS (chitosan)/Zn2+ physically cross-linked double network hydrogel and named it SA/CS/Zn2+ PDH. The characterization results demonstrated that increased Zn2+ content led to hydrogels with improved physical and chemical properties, such as rheology, water retention, and swelling capacity. Moreover, the hydrogels exhibited favorable antibacterial properties and biocompatibility. Notably, the establishment of an in vitro pro-healing wound model further confirmed that the hydrogel had a superior ability to repair wounds and promote skin regeneration. In future, as a natural biomaterial with antimicrobial properties, it has the potential to promote wound healing.