Trends in "green" and novel methods of pectin modification - A review

Arabinan branches in the RG-I region of citrus pectin aid acid-induced gelation

Gelation is a critical property of citrus pectin. However, the roles played by neutral sugar side-chains on acid-induced pectin gelation remain poorly understood. Herein, galactan- or/and arabinan-eliminated pectins (P-G, P-A, and P-AG) were used to investigate the effects of side-chains on gelation. The gel hardness values of citrus pectin, P-G, P-A, and P-AG were 42.6, 39.9, 5.3, and 2.1 g, respectively, suggesting that arabinan contributed more to gelation than galactan. We next found that arabinan branches promoted pectin chain entanglement more effectively than arabinan backbones. Destabilizer addition experiments showed that hydrogen bonding, electrostatic interaction, and hydrophobic interaction were the main forces affecting pectin gel networks and strength, which was further validated by molecular dynamic simulations. The total number of hydrogen bonds between the arabinan branches and galactan/HG (65.7) was significantly higher than that between the arabinan backbones and galactan/HG (39.1), indicating that arabinan branches predominated in terms of such interactions. This study thus elucidated the roles played by neutral-sugar side-chains, especially the arabinan branches of acid-induced pectin gels, in term of enhancing high-methoxyl pectin gelation, and offers novel insights into the structure-gelling relationships of citrus pectin.

High methoxyl pectin grafted onto gallic acid by one- and two-pot redox-pair procedures

The aim of this research was to graft gallic acid (GA) onto high methoxyl pectin (HMP) through the redox-pair of ascorbic acid (Aa) and hydrogen peroxide (H2O2) with one- and two-pot procedures. The effectiveness of the both procedures and the chemical, physical and antioxidant properties of the obtained HMP-GA were evaluated. HMP-GAone-pot (23.3 ± 0.21 mg GA Equivalent (GAE)/g) and HMP-GAtwo-pot (32.3 ± 0.52 mg GAE/g) were best obtained at H2O2/Aa molar ratio-HMP/GA weight ratio of 9.0-0.5 and 16.0-0.5, respectively. The UV-Vis and FT-IR spectra and along with their derivative and thermal gravimetric analyses, revealed differences between HMP-GAone-pot and HMP-GAtwo-pot. The latter exhibited a greater antioxidant capacity than the former in single electron transfer (ET), hydrogen atom transfer (HAT), and ET-HAT mixed assays. The chemical differences can be attributed to side reactions that may have interfered with the grafting reaction. Consequently, HMP-GA, possessing unique antioxidant and prebiotic properties, can be synthesized through redox-pair procedures.

Pectic polysaccharides from Tartary buckwheat sprouts: Effects of ultrasound-assisted Fenton treatment and mild alkali treatment on their physicochemical characteristics and biological functions

Buckwheat sprouts are rich in pectic polysaccharides, which possess numerous health-improving benefits. However, the precise structure-activity relationship of pectic polysaccharides from Tartary buckwheat sprouts (TP) is still scant, which ultimately restricts their applications in the food industry. Hence, both ultrasound-assisted Fenton treatment (UAFT) and mild alkali treatment (MATT) were utilized for the modification of TP, and then the effects of physicochemical characteristics of original and modified TPs on their bioactivities were assessed. Our findings reveled that the UAFT treatment could precisely reduce TP's molecular weight, with the levels decreased from 8.191 × 104 Da to 0.957 × 104 Da. Meanwhile, the MATT treatment could precisely reduce TP's esterification degree, with the values decreased from 28.04 % to 4.72 %. Nevertheless, both UAFT and MATT treatments had limited effects on the backbone and branched chain of TP. Moreover, our findings unveiled that the UAFT treatment could notably promote TP's antioxidant, antiglycation, and immunostimulatory effects, while remarkedly reduce TP's anti-hyperlipidemic effect, which were probably owing to that the UAFT treatment obviously reduced TP's molecular weight. Additionally, the MATT treatment could also promote TP's immunostimulatory effect, which was probably attributed to that the MATT treatment significantly decreased TP's esterification degree. Interestingly, the MATT treatment could regulate TP's antioxidant and antiglycation effects, which was probably attributed to that the MATT treatment simultaneously reduced its esterification degree and bound phenolics. Our findings are conducive to understanding TP's structure-activity relationship, and can afford a scientific theoretical basis for the development of functional or healthy products based on TPs. Besides, the UAFT treatment can be a promising approach for the modification of TP to improve its biological functions.

Effect of excitation voltage in a magnetically induced electric field on the physicochemical, structural and functional properties of citrus pectin

Treatment with a magnetic induced electric field (MIEF) under acidic conditions has proven to be an effective method for modifying pectin, enhancing its functional attributes. In this study, the effects of varying excitation voltages of MIEF under acidic conditions on the physicochemical, structural, and functional properties of citrus pectin (CP) were explored. The results demonstrated that compared to CP without MIEF treatment, MIEF-treated CP exhibited enhanced thermal stability, rheological behavior, emulsifying and gel-forming abilities, and antioxidant capacity. These improvements were attributed to higher degrees of esterification, reduced molecular weights, and increased levels of galacturonic acid and homogalacturonan in the structural backbone of the treated CP. Additionally, MIEF treatment under acidic conditions altered the surface morphology and crystalline structure of CP. Therefore, our findings suggest that applying moderate excitation voltages (150-200 V) during MIEF treatment can enhance the functional properties of CP, leading to the production of high-quality modified pectin.

Structural analysis and biological activity of cell wall polysaccharides and enzyme-extracted polysaccharides from pomelo (Citrus maxima (Burm.) Merr.)

Pomelo peel is a valuable source of pectin, but research on its cell wall polysaccharides is limited. This study compared the cell wall polysaccharides of pomelo peel, enzyme-extracted polysaccharides of pomelo peel, and enzyme-extracted polysaccharides of whole pomelo fruit. Cell wall polysaccharides, including water-soluble pectin (WSP), chelator-soluble pectin (CSP), sodium carbonate-soluble pectin (NSP), 1 mol/L KOH soluble hemicellulose (KSH-1), and 4 mol/L KOH soluble hemicellulose (KSH-2), were obtained by sequence-extraction method. Total polysaccharides from whole pomelo fruit (TP) and peel-polysaccharides from pomelo pericarps (PP) were obtained using enzyme-extraction method. The structural, thermal, rheological, antioxidant properties, and wound healing effect in vitro were described for each polysaccharide. WSP had a uniform molecular weight distribution and high uronic acid (UA) content, suitable for commercial pectin. NSP had the highest Rhamnose (Rha)/UA ratio and a rich side chain with highest viscosity and water retention. PP displayed the highest DPPH radical scavenging activity and reducing capacity at 0.1 to 2.0 mg/mL concentration range, with an IC50 of 1.05 mg/mL for DPPH free radicals. NSP also demonstrated the highest hydroxyl radical scavenging activity and promoted Human dermal keratinocyte proliferation and migration at 10 μg/mL, suggesting potential applications in daily chemical and pharmaceutical industries.

Influences of different ultrasonic treatment intensities on the molecular chain conformation and interfacial behavior of sugar beet pectin

In this study, the effects of different ultrasonic treatment intensities (57, 170, and 283 W/cm2) on the chemical composition, molecular chain characteristics, crystal structure, micromorphology, interfacial adsorption behavior and emulsifying properties of sugar beet pectin (SBP) were investigated. Ultrasonic treatment did not change the types of SBP monosaccharides, but it had impacts on their various monosaccharide contents. Moreover, the feruloylated, acetyl, and methoxy groups of SBP also undergo varying degrees of changes. The increase in ultrasonic treatment intensity led to transition in the molecular chain conformation of SBP from rigid semi-flexible chains to flexible chains, accompanied by modification in its crystal structure. Microstructural analysis of SBP confirmed the significant change in molecular chain conformation. Modified SBP could form an elastic interfacial film with higher deformation resistance on the oil-water interface. The SBP sample modified with 170 W/cm2 exhibited better emulsifying properties owing to its better interfacial adsorption behavior. Moreover, the emulsions prepared with modified SBP exhibited better stability capability under different environmental stresses (pH value, salt ion concentration, heating temperature and freeze-thaw treatment). The results revealed that the ultrasonic technology is useful to improve the emulsifying properties of SBP.

Exploring the potential of waste biomass-derived pectin and its functionalized derivatives for water treatment

Environmental pollution remains a constant challenge due to the indiscriminate use of fossil fuels, mining activities, chemicals, drugs, aromatic compounds, pesticides, etc. Many emerging pollutants with no fixed standards for monitoring and control are being reported. These have adverse impacts on human life and the environment around us. This alarms the wastewater management towards developing materials that can be used for bulk water treatment and are easily available, low cost, non-toxic and biodegradable. Waste biomass like pectin is extracted from fruit peels which are a discarded material. It is used in pharmaceutical and nutraceutical applications but its application as a material for water treatment is very limited in literature. The scientific gap in literature review reports are evident with discussion only on pectin based hydrogels or specific pectin derivatives for some applications. This review focuses on the chemistry, extraction, functionalization and production of pectin derivatives and their applications in water treatment processes. Pectin functionalized derivatives can be used as a flocculant, adsorbent, nano biopolymer, biochar, hybrid material, metal-organic frameworks, and scaffold for the removal of heavy metals, ions, toxic dyes, and other contaminants. The huge quantum of pectin biomass may be explored further to strengthen environmental sustainability and circular economy practices.

Physicochemical characterization of pectin extracted from mandarin peels using novel electromagnetic heat

A novel electromagnetic heat extraction method was presented, whereby mandarin peels residue solution was located in a winding coil subjected to an oscillating magnetic field, and the pectin was extracted under appropriate conditions. Numerical relationships between applied magnetic field and induced electric field (IEF) in the extraction process were elaborated. The results showed that the induced current density, IEF and terminal temperature increased with increasing magnetic field. The maximum current density of 0.35 A/cm corresponds to the highest terminal temperature of 84.6 °C and IEF intensity of 26.6 V/cm. When magnetic field intensity was 1.39 T and the extraction time was 15 min, the maximum yield of pectin reached 9.16 %. In addition, all treatments impacted the ash content, protein content, water-holding capacity (WHC), and oil-holding capacity (OHC) of the obtained pectin. The pectin extracted by electromagnetic heat had the lowest DE value of 71.3 % with 126.55 kDa molecular weight, while the GalA content was at the highest level of 76.18 %. After different treatments, the composition of pectin monosaccharides changed, but there were slight differences in the composition of pectin polysaccharides. Moreover, the electromagnetic heat extracted pectin had light color and an obvious surface fragmentation of the peel residue.

Insights into the impact of modification methods on the structural characteristics and health functions of pectin: A comprehensive review

Pectin is a complex polysaccharide that is widely present in plant cells and has multiple physiological functions. However, most pectin exists in the form of protopectin, which has a large molecular weight and cannot be fully absorbed and utilized in the human gut to exert its effects. The significant differences in the structure of different sources of pectin also limited their application in the food and medical fields. In order to achieve greater development and utilization of pectin functions, this paper reviewed several commonly used methods for pectin modification from physical, chemical, and biological perspectives, and elaborated on the relationship between these modification methods and the structure and functional properties of pectin. At the same time, the functional characteristics of modified pectin and its application in medical health, such as regulating intestinal health, anticancer, anti-inflammatory, and drug transport, were reviewed, so as to provide a theoretical basis for targeted modification of pectin and the development of new modified pectin products.

Environmentally Friendly Approach to Pectin Extraction from Grapefruit Peel: Microwave-Assisted High-Pressure CO2/H2O

In this research, pectin extraction from grapefruit peel (GPP) was performed using a microwave-assisted high-pressure CO2/H2O (MW-HPCO2) system. The Box-Behnken design of response surface methodology was applied for the optimization of MW-HPCO2 extraction conditions to obtain the highest pectin yield. The effects of temperature, time, and liquid/solid ratio on pectin yield were examined in the range of 100-150 °C, 5-15 min, and 10-20 mL g-1, respectively. Under the optimum extraction conditions (147 °C, 3 min, and 10 mL g-1), pectin was obtained with a yield of 27.53%. The results obtained showed that the extraction temperature and time had a strong effect on the pectin yield, while the effect of the liquid/solid ratio was not significant, and the pectin was effectively extracted from grapefruit peel (GP) using MW-HPCO2. Additionally, the application of GPP in apricot jam showed that MW-HPCO2-GPP can be used as a thickener in the food industry. The yield and physicochemical properties (ash, protein, galacturonic acid, reducing sugar and methoxyl content, degree of esterification, equivalent weight, color, viscosity) of pectin extracted in the optimum conditions of the MW-HPCO2 method were superior to pectin extracted by the traditional method. The results of this study revealed that MW-HPCO2 could be an innovative green and rapid technique for pectin extraction.

Recent progress and treatment strategy of pectin polysaccharide based tissue engineering scaffolds in cancer therapy, wound healing and cartilage regeneration

Natural polymers and its mixtures in the form of films, sponges and hydrogels are playing a major role in tissue engineering and regenerative medicine. Hydrogels have been extensively investigated as standalone materials for drug delivery purposes as they enable effective encapsulation and sustained release of drugs. Biopolymers are widely utilised in the fabrication of hydrogels due to their safety, biocompatibility, low toxicity, and regulated breakdown by human enzymes. Among all the biopolymers, polysaccharide-based polymer is well suited to overcome the limitations of traditional wound dressing materials. Pectin is a polysaccharide which can be extracted from different plant sources and is used in various pharmaceutical and biomedical applications including cartilage regeneration. Pectin itself cannot be employed as scaffolds for tissue engineering since it decomposes quickly. This article discusses recent research and developments on pectin polysaccharide, including its types, origins, applications, and potential demands for use in AI-mediated scaffolds. It also covers the materials-design process, strategy for implementation to material selection and fabrication methods for evaluation. Finally, we discuss unmet requirements and current obstacles in the development of optimal materials for wound healing and bone-tissue regeneration, as well as emerging strategies in the field.

Effect of H2O2-assisted ultrasonic bath on the degradation and physicochemical properties of pectin

The effects of H2O2-assisted ultrasonic bath degradation technology on pectin were investigated. The degradation efficiency with different pectin concentrations, H2O2 concentrations, ultrasonic power, and ultrasonic time was analyzed. The results showed that pectin concentration was negatively correlated with the degradation efficiency of pectin, while, H2O2 concentration, ultrasonic power, and ultrasonic time were positive correlated with the degradation efficiency. Besides, the apparent viscosity and viscoelasticity of the degraded pectin decreased significantly. The antioxidant activity increased after the H2O2-assisted ultrasonic bath treatment. The results of FTIR, NMR, laser particle size, SEM, XRD, and AFM analysis indicated that the degradation treatment did not destroy the main structure of pectin. The average particle size and crystallinity of pectin decreased. The degree of aggregation and the height of the molecular chain decreased significantly. In conclusion, the H2O2-assisted ultrasonic bath degradation technique could effectively degrade pectin. This study provided a comprehensive analysis of the degradation of pectin under H2O2-assisted ultrasonic bath, which will be beneficial to further develop H2O2-assisted ultrasonic bath techniques for pectin degradation.

A Review of Natural Polysaccharides: Sources, Characteristics, Properties, Food, and Pharmaceutical Applications

Natural polysaccharides, which are described in this study, are some of the most extensively used biopolymers in food, pharmaceutical, and medical applications, because they are renewable and have a high level of biocompatibility and biodegradability. The fundamental understanding required to properly exploit polysaccharides potential in the biocomposite, nanoconjugate, and pharmaceutical industries depends on detailed research of these molecules. Polysaccharides are preferred over other polymers because of their biocompatibility, bioactivity, homogeneity, and bioadhesive properties. Natural polysaccharides have also been discovered to have excellent rheological and biomucoadhesive properties, which may be used to design and create a variety of useful and cost-effective drug delivery systems. Polysaccharide-based composites derived from natural sources have been widely exploited due to their multifunctional properties, particularly in drug delivery systems and biomedical applications. These materials have achieved global attention and are in great demand because to their biochemical properties, which mimic both human and animal cells. Although synthetic polymers account for a substantial amount of organic chemistry, natural polymers play a vital role in a range of industries, including biomedical, pharmaceutical, and construction. As a consequence, the current study will provide information on natural polymers, their biological uses, and food and pharmaceutical applications.

An overview of microbial enzymatic approaches for pectin degradation

Pectin, a complex natural macromolecule present in primary cell walls, exhibits high structural diversity. Pectin is composed of a main chain, which contains a high amount of partly methyl-esterified galacturonic acid (GalA), and numerous types of side chains that contain almost 17 different monosaccharides and over 20 different linkages. Due to this peculiar structure, pectin exhibits special physicochemical properties and a variety of bioactivities. For example, pectin exhibits strong bioactivity only in a low molecular weight range. Many different degrading enzymes, including hydrolases, lyases and esterases, are needed to depolymerize pectin due to its structural complexity. Pectin degradation involves polygalacturonases/rhamnogalacturonases and pectate/pectin lyases, which attack the linkages in the backbone via hydrolytic and β-elimination modes, respectively. Pectin methyl/acetyl esterases involved in the de-esterification of pectin also play crucial roles. Many α-L-rhamnohydrolases, unsaturated rhamnogalacturonyl hydrolases, arabinanases and galactanases also contribute to heterogeneous pectin degradation. Although numerous microbial pectin-degrading enzymes have been described, the mechanisms involved in the coordinated degradation of pectin through these enzymes remain unclear. In recent years, the degradation of pectin by Bacteroides has received increasing attention, as Bacteroides species contain a unique genetic structure, polysaccharide utilization loci (PULs). The specific PULs of pectin degradation in Bacteroides species are a new field to study pectin metabolism in gut microbiota. This paper reviews the scientific information available on pectin structural characteristics, pectin-degrading enzymes, and PULs for the specific degradation of pectin.

Structural, chemical and technofunctional properties pectin modification by green and novel intermediate frequency ultrasound procedure

The impact of intermediate frequency ultrasound (IFUS, 582, 864 and 1144 kHz), mode of operation (continue and pulsed) and ascorbic acid (Aa) addition on the structural, chemical and technofunctional properties of commercial citrus high methoxyl-grade pectin (HMP) was investigated. The chemical dosimetry of IFUS, monitored by the triiodide formation rate (I3-), demonstrated that the pulsed ratio (1900 ms on/100 ms off) at the three frequencies was similar to that of continue mode but IFUS1144 kHz produced more acoustic streaming demonstrated by the height liquid measured using image analysis. In presence of Aa, HMP presented higher fragmentation than in its absence. IFUS did not give rise any changes in the main functional groups of the HMP. In general, a reduction in molecular weight was observed, being the presence of Aa the most influencing factor. Regarding monosaccharides, IFUS modified the structure of homogalacturonan and rhamnogalacturonan-I and increased of GalA contents of the HMP in presence of Aa at the above three frequencies. A reducing of the consistency index (k) and increasing of the flow index (n) of HMP were showed by IFUS frequency and Aa addition. The emulsifying activity and stability index were increased for HMP treated by IFUS in continue mode at all frequencies and in presence of Aa. The results presented in this research shown the effectiveness of IFUS as tool to modify pectin into different structures with different functionalities.

Preparation of curcumin-loaded pectin-nisin copolymer emulsion and evaluation of its stability

In the paper, Nisin was grafted onto native pectin by the 1-ethyl-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC·HCl) method. Structure characterisation showed that the carboxyl group of pectin interacted with the amino group of Nisin and formed an amide bond. The highest grafting ratio of the modified pectin was up to 24.89 %. The emulsifying property of modified pectin, significantly improved, and emulsification performance improved with increasing grafting ratio. Emulsifying activity, emulsion stability, Zeta potential, and droplet morphology data demonstrate a notable enhancement in pectin's emulsifying properties due to Nisin's introduction, with the degree of grafting showing a direct correlation with the improvement observed. Pectin-based emulsion is utilized to load curcumin, enhancing its stability and bioavailability. Research findings highlight that the incorporation of Nisin-modified pectin significantly elevates curcumin encapsulation efficiency, while decelerating its release rate. Moreover, the stability of curcumin loaded in the modified pectin under light exposure, alkaline conditions, and long-term storage is also significantly improved. Ultimately, the bioavailability of curcumin escalates from 0.368 to 0.785.

Modified pectin with anticancer activity in breast cancer: A systematic review

Breast cancer is the most commonly diagnosed cancer among women worldwide. The current pharmacological treatments for breast cancer have numerous adverse effects and are not always effective. Recently, the anticancer activity of modified pectins (MPs) against various types of cancers, including breast cancer, has been investigated. This systematic review was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) model, including scientific articles from the last 22 years that measured the anticancer activity of MPs on breast cancer. The articles were searched in four databases with the terms: "modified pectin" and "breast cancer". Nine articles were included, five in vitro and four mixed (in vitro and in vivo). Different models and methods by which anticancer activity was measured were analyzed. All the studies reported positive results in both cell lines and in vivo murine models of breast cancer. The extracted data suggest a positive effect and provide mechanistic evidence of MPs in the treatment of breast cancer. However, as limited number of studies were included, further in vivo studies are required to obtain more conclusive preclinical evidence.

Synthesis of Pectin and Eggshell Biowaste-Mediated Nano-hydroxyapatite (nHAp), Their Physicochemical Characterizations, and Use as Antibacterial Material

The current study reports the synthesis of sustainable nano-hydroxyapatite (nHAp) using a wet chemical precipitation approach. The materials used in the green synthesis of nHAp were obtained from environmental biowastes such as HAp from eggshells and pectin from banana peels. The physicochemical characterization of obtained nHAp was carried out using different techniques. For instance, X-ray diffractometer (XRD) and FTIR spectroscopy were used to study the crystallinity and synthesis of nHAp respectively. In addition, the morphology and elemental composition of nHAP were studied using FESEM equipped with EDX. HRTEM showed the internal structure of nHAP and calculated its grain size which was 64 nm. Furthermore, the prepared nHAp was explored for its antibacterial and antibiofilm activity which has received less attention previously. The obtained results showed the potential of pectin-bound nHAp as an antibacterial agent for various biomedical and healthcare applications.

Modification methods, biological activities and applications of pectin: A review

Pectin is a complex and functionally rich natural plant polysaccharide that is widely used in food, medical, and cosmetic industries. It can be modified to improve its properties and expand its applications. Modification methods for natural pectin can be divided into physical, chemical, enzymatic, and compound methods. Different modification methods can result in modified pectins (MPs) exhibiting different physicochemical properties and biological activities. The objectives of this paper were to review the various pectin modification methods explored over the last decade, compare their differences, summarize the impact of different modification methods on the biological activity and physicochemical properties of pectin, and describe the applications of MPs in food and pharmaceutical fields. Finally, suggestions and perspectives for the development of MPs are discussed. This review offers a theoretical reference for the rational and efficient processing of pectin and the expansion of its applications.

Pectin-rich dragon fruit peel extracts: An environmentally friendly emulsifier of natural origin

Pectin extraction is generally an energy-intensive industrial process, while on the other hand their extraction methods vary from different sources. Starting with that perspective, pectin (WSP) containing ultra-low degree of methylation (31.08 ± 1.27%) from dragon fruit peel (DFP) was extracted by using pure water at room temperature. WSP, dominant in DFP (17.13 ± 1.01%), showed both a high molecular weight and a wide molecular weight distribution, while the yield of the rest acid-soluble pectin (HAP) from DFP residue was only 5.22 ± 0.76%. Furthermore, WSP can stabilize emulsions over a wide range of concentrations and oil phases, especially HIPE. Therefore, the hypothesis was verified that the pectin-rich extract from dragon fruit peel with excellent emulsifying properties could be simply extracted by pure water. This environmentally-friendly and energy-saving extraction method provides a new insight to increase the additional value of dragon fruit peel produced in food processing.

Pectin Hydrogels: Gel-Forming Behaviors, Mechanisms, and Food Applications

Pectin hydrogels have garnered significant attention in the food industry due to their remarkable versatility and promising properties. As a naturally occurring polysaccharide, pectin forms three-dimensional (3D) hydrophilic polymer networks, endowing these hydrogels with softness, flexibility, and biocompatibility. Their exceptional attributes surpass those of other biopolymer gels, exhibiting rapid gelation, higher melting points, and efficient carrier capabilities for flavoring and fat barriers. This review provides an overview of the current state of pectin gelling mechanisms and the classification of hydrogels, as well as their crosslinking types, as investigated through diverse research endeavors worldwide. The preparation of pectin hydrogels is categorized into specific gel types, including hydrogels, cryogels, aerogels, xerogels, and oleogels. Each preparation process is thoroughly discussed, shedding light on how it impacts the properties of pectin gels. Furthermore, the review delves into the various crosslinking methods used to form hydrogels, with a focus on physical, chemical, and interpenetrating polymer network (IPN) approaches. Understanding these crosslinking mechanisms is crucial to harnessing the full potential of pectin hydrogels for food-related applications. The review aims to provide valuable insights into the diverse applications of pectin hydrogels in the food industry, motivating further exploration to cater to consumer demands and advance food technology. By exploiting the unique properties of pectin hydrogels, food formulations can be enhanced with encapsulated bioactive substances, improved stability, and controlled release. Additionally, the exploration of different crosslinking methods expands the horizons of potential applications.

Classification, gelation mechanism and applications of polysaccharide-based hydrocolloids in pasta products: A review

Polysaccharide-based hydrocolloids (PBHs) are a group of water-soluble polysaccharides with high molecular weight hydrophilic long-chain molecules, which are widely employed in food industry as thickeners, emulsifiers, gelling agents, and stabilizers. Pasta products are considered to be an important source of nutrition for humans, and PBHs show great potential in improving their quality and nutritional value. The hydration of PBHs to form viscous solutions or sols under specific processing conditions is a prerequisite for improving the stability of food systems. In this review, PBHs are classified in a novel way according to food processing conditions, and their gelation mechanisms are summarized. The application of PBHs in pasta products prepared under different processing methods (baking, steaming/cooking, frying, freezing) are reviewed, and the potential mechanism of PBHs in regulating pasta products quality is revealed from the interaction between PBHs and the main components of pasta products (protein, starch, and water). Finally, the safety of PBHs is critically explored, along with future perspectives. This review provides a scientific foundation for the development and specific application of PBHs in pasta products, and provides theoretical support for improving pasta product quality.

Novel Double Hybrid-Type Bone Cements Based on Calcium Phosphates, Chitosan and Citrus Pectin

In this work, the influence of the liquid phase composition on the physicochemical properties of double hybrid-type bone substitutes was investigated. The solid phase of obtained biomicroconcretes was composed of highly reactive α-tricalcium phosphate powder (α-TCP) and hybrid hydroxyapatite/chitosan granules (HA/CTS). Various combinations of disodium phosphate (Na2HPO4) solution and citrus pectin gel were used as liquid phases. The novelty of this study is the development of double-hybrid materials with a dual setting system. The double hybrid phenomenon is due to the interactions between polycationic polymer (chitosan in hybrid granules) and polyanionic polymer (citrus pectin). The chemical and phase composition (FTIR, XRD), setting times (Gillmore needles), injectability, mechanical strength, microstructure (SEM) and chemical stability in vitro were studied. The setting times of obtained materials ranged from 4.5 to 30.5 min for initial and from 7.5 to 55.5 min for final setting times. The compressive strength varied from 5.75 to 13.24 MPa. By incorporating citrus pectin into the liquid phase of the materials, not only did it enhance their physicochemical properties, but it also resulted in the development of fully injectable materials featuring a dual setting system. It has been shown that the properties of materials can be controlled by using the appropriate ratio of citrus pectin in the liquid phase.

Protein-Stabilized Emulsion Gels with Improved Emulsifying and Gelling Properties for the Delivery of Bioactive Ingredients: A Review

In today's food industry, the potential of bioactive compounds in preventing many chronic diseases has garnered significant attention. Many delivery systems have been developed to encapsulate these unstable bioactive compounds. Emulsion gels, as colloidal soft-solid materials, with their unique three-dimensional network structure and strong mechanical properties, are believed to provide excellent protection for bioactive substances. In the context of constructing carriers for bioactive materials, proteins are frequently employed as emulsifiers or gelling agents in emulsions or protein gels. However, in emulsion gels, when protein is used as an emulsifier to stabilize the oil/water interface, the gelling properties of proteins can also have a great influence on the functionality of the emulsion gels. Therefore, this paper aims to focus on the role of proteins' emulsifying and gelling properties in emulsion gels, providing a comprehensive review of the formation and modification of protein-based emulsion gels to build high-quality emulsion gel systems, thereby improving the stability and bioavailability of embedded bioactive substances.

Versatile functionalization of pectic conjugate: From design to biomedical applications

Pectin exists extensively in nature and has attracted much attention in biological applications for its unique chemical and physical characteristics. Functionalized pectin, especially pectic conjugates, has given many possibilities for pectin to improve its properties and bioactivity as well as to deliver active molecules. To better exploit this strategy of pectic functionalization, this review presents in detail the structural modifications of pectin, different synthetic methods, and design strategies of pectic conjugates involving both traditional chemical and "green" approaches. Here, the research ideas and applications of pectic prodrugs as well as the development of preparation based on pectic conjugates are reviewed, with emphasis on crosslinking systems of functionalized pectin and nanosystems based on self-assembly techniques. We hope this review will provide comprehensive and valuable information for the functionalization and systematization of the pectic conjugate from synthesis to application.

Recent progress in pectin extraction, characterization, and pectin-based films for active food packaging applications: A review

Pectin is an abundant complex polysaccharide obtained from various plants. Safe, biodegradable, and edible pectin has been extensively utilized in the food industry as a gelling agent, thickener, and colloid stabilizer. Pectin can be extracted in a variety of ways, thus affecting its structure and properties. Pectin's excellent physicochemical properties make it suitable for many applications, including food packaging. Recently, pectin has been spotlighted as a promising biomaterial for manufacturing bio-based sustainable packaging films and coatings. Functional pectin-based composite films and coatings are useful for active food packaging applications. This review discusses pectin and its use in active food packaging applications. First, basic information and characteristics of pectin, such as the source, extraction method, and structural characteristics, were described. Then, various methods of pectin modification were discussed, and the following section briefly described pectin's physicochemical properties and applications in the food sector. Finally, the recent development of pectin-based food packaging films and coatings and their use in food packaging were comprehensively discussed.

Improving Effects of Laccase-Mediated Pectin–Ferulic Acid Conjugate and Transglutaminase on Active Peptide Production in Bovine Lactoferrin Digests

Bovine lactoferrin (bLf) is a multifunctional glycoprotein and a good candidate for producing diverse bioactive peptides, which are easily lost during over-digestion. Accordingly, the effects of laccase-mediated pectin–ferulic acid conjugate (PF) and transglutaminase (TG) on improving the production of bLf active peptides by in vitro gastrointestinal digestion were investigated. Using ultra-high-performance liquid chromatography tandem mass spectroscopy (UPLC-MS-MS), the digests of bLf alone, PF-encapsulated bLf complex (LfPF), and TG-treated LfPF complex (LfPFTG) produced by conditioned in vitro gastric digestion (2000 U/mL pepsin, pH 3.0, 37 °C, 2 h) were identified with seven groups of active peptide-related fragments, including three common peptides (VFEAGRDPYKLRPVAAE, FENLPEKADRDQYEL, and VLRPTEGYL) and four differential peptides (GILRPYLSWTE, ARSVDGKEDLIWKL, YLGSRYLT, and FKSETKNLL). The gastric digest of LfPF contained more diverse and abundant detectable peptides of longer lengths than those of bLf and LfPFTG. After further in vitro intestinal digestion, two active peptide-related fragments (FEAGRDPYK and FENLPEKADRDQYE) remained in the final digest of LfPFTG; one (EAGRDPYKLRPVA) remained in that of bLf alone, but none remained in that of LfPF. Conclusively, PF encapsulation enhanced the production of bLf active peptide fragments under the in vitro gastric digestion applied. TG treatment facilitated active peptide FENLPEKADRDQYE being kept in the final gastrointestinal digest.

The Preparation and Potential Bioactivities of Modified Pectins: A Review

Pectins are complex polysaccharides that are widely found in plant cells and have a variety of bioactivities. However, the high molecular weights (Mw) and complex structures of natural pectins mean that they are difficult for organisms to absorb and utilize, limiting their beneficial effects. The modification of pectins is considered to be an effective method for improving the structural characteristics and promoting the bioactivities of pectins, and even adding new bioactivities to natural pectins. This article reviews the modification methods, including chemical, physical, and enzymatic methods, for natural pectins from the perspective of their basic information, influencing factors, and product identification. Furthermore, the changes caused by modifications to the bioactivities of pectins are elucidated, including their anti-coagulant, anti-oxidant, anti-tumor, immunomodulatory, anti-inflammatory, hypoglycemic, and anti-bacterial activities and the ability to regulate the intestinal environment. Finally, suggestions and perspectives regarding the development of pectin modification are provided.

Polysaccharides for Medical Technology: Properties and Applications

Over the past decade, the use of polysaccharides has gained tremendous attention in the field of medical technology. They have been applied in various sectors such as tissue engineering, drug delivery system, face mask, and bio-sensing. This review article provides an overview and background of polysaccharides for biomedical uses. Different types of polysaccharides, for example, cellulose and its derivatives, chitin and chitosan, hyaluronic acid, alginate, and pectin are presented. They are fabricated in various forms such as hydrogels, nanoparticles, membranes, and as porous mediums. Successful development and improvement of polysaccharide-based materials will effectively help users to enhance their quality of personal health, decrease cost, and eventually increase the quality of life with respect to sustainability.

Rheological performance of film-forming solutions and barrier properties of films fabricated from cold plasma-treated high methoxyl apple pectin and crosslinked by Ca2+: Impact of plasma treatment voltage

Sustainable and "green" technologies, such as cold plasma are gaining attention in recent times for improving the functional properties of hydrocolloids. Chemical modifications of hydrocolloids require several chemicals and solvents, which are not environment-friendly. The major objective of the study was to understand the impact of plasma treatment (170-230 V|15 min) on the rheology of film-forming solutions (FFS) and the barrier properties of pectin films. The film-forming properties of plasma-treated pectin were investigated in the presence of two plasticizers, namely, glycerol and polyethylene glycol (PEG) 400. The effects of cross-linking by CaCl₂ on the rheology of FFS and barrier properties of the films were discussed. A voltage-dependent decrease in the apparent viscosity of FFS was observed. The viscoelastic properties of the FFS were enhanced due to cross-linking. Glycerol exhibited a better plasticizing effect than PEG. Cross-linking and increasing voltage synergistically contributed towards lower oxygen and carbon dioxide transmission rates. The moisture sorption rate and capacity of the films increased with the voltage of the treatment. The resistance to extension of the films made from glycerol and PEG decreased with voltage, with no significant change in extensibility. On the other hand, the cross-linking by Ca²⁺ and plasma treatment enhanced the resistance to extension for the films made from both the plasticizers. While the increasing hydrophilicity and opacity of the films were a major drawback of plasma modification, the increase in UV barrier property of the films was an advantage of the modification.

Extraction of Pectin from Passion Fruit Peel: Composition, Structural Characterization and Emulsion Stability

Extraction methods directly affect pectin extraction yield and physicochemical and structural characteristics. The effects of acid extraction (AE), ultrasonic-assisted acid extraction (UA), steam explosion pretreatment combined with acid extraction (SEA) and ultrasonic-assisted SEA (USEA) on the yield, structure, and properties of passion fruit pectin were studied. The pectin yield of UA was 6.5%, equivalent to that of AE at 60 min (5.3%), but the emulsion stability of UA pectin was poor. The pectin obtained by USEA improved emulsion stability. Compared with UA, it had higher protein content (0.62%), rhamnogalacturonan I (18.44%) and lower molecular weight (0.72 × 10⁵ Da). In addition, SEA and USEA had high pectin extraction yields (9.9% and 10.7%) and the pectin obtained from them had lower degrees of esterification (59.3% and 68.5%), but poor thermal stability. The results showed that ultrasonic-assisted steam explosion pretreatment combined with acid extraction is a high-efficiency and high-yield method. This method obtains pectin with good emulsifying stability from passion fruit peel.

Polysaccharide-Based Composite Hydrogels as Sustainable Materials for Removal of Pollutants from Wastewater

Nowadays, pollution has become the main bottleneck towards sustainable technological development due to its detrimental implications in human and ecosystem health. Removal of pollutants from the surrounding environment is a hot research area worldwide; diverse technologies and materials are being continuously developed. To this end, bio-based composite hydrogels as sorbents have received extensive attention in recent years because of advantages such as high adsorptive capacity, controllable mechanical properties, cost effectiveness, and potential for upscaling in continuous flow installations. In this review, we aim to provide an up-to-date analysis of the literature on recent accomplishments in the design of polysaccharide-based composite hydrogels for removal of heavy metal ions, dyes, and oxyanions from wastewater. The correlation between the constituent polysaccharides (chitosan, cellulose, alginate, starch, pectin, pullulan, xanthan, salecan, etc.), engineered composition (presence of other organic and/or inorganic components), and sorption conditions on the removal performance of addressed pollutants will be carefully scrutinized. Particular attention will be paid to the sustainability aspects in the selected studies, particularly to composite selectivity and reusability, as well as to their use in fixed-bed columns and real wastewater applications.

Synergy in Aqueous Systems Containing Bioactive Ingredients of Natural Origin: Saponin/Pectin Mixtures

Biocompatible and biodegradable ingredients of natural origin are widely used in the design of foam and emulsion systems with various technological applications in the food, cosmetics and pharmaceutical industries. The determination of the precise composition of aqueous solution formulations is a key issue for the achievement of environmentally-friendly disperse systems with controllable properties and reasonable stability. The present work is focused on the investigation of synergistic interactions in aqueous systems containing Quillaja saponins and Apple pectins. Profile analysis tensiometer (PAT-1) is applied to study the surface tension and surface dilational rheology of the adsorption layers at the air/solution interface. The properties and the foam films (drainage kinetics, film thickness, disjoining pressure isotherm, critical pressure of rupture) are investigated using the thin-liquid-film (TLF) microinterferometric method of Scheludko–Exerowa and the TLF-pressure-balance technique (TLF-PBT). The results demonstrate that the structure and stability performance of the complex aqueous solutions can be finely tuned by changing the ratio of the bioactive ingredients. The attained experimental data evidence that the most pronounced synergy effect is registered at a specific saponin:pectin ratio. The obtained information is essential for the further development of aqueous solution formulations intended to achieve stable foams based on mixtures of Quillaja saponins and Apple pectins in view of future industrial, pharmaceutical and biomedical applications.

Pulsed electric field assisted extraction of natural food pigments and colorings from plant matrices

•

Pulsed electric field (PEF) technology enables the extraction of food pigments at lower temperatures.

•

PEF process intensification may reduce the extraction yield depending on the plant matrix.

•

Coupling PEF with other emerging technologies is a smart strategy to extract natural pigments.

•

The application of PEF technology in natural food pigment extraction still requires further studies.

Coloring compounds are widely applied to manufacturing foods and beverages. The worldwide food market is replacing artificial colorants with natural alternatives, given the increased consumer demand for natural products. However, these substitutes are still an issue due to their high production cost and low chemical and physical stability. Furthermore, natural pigments are highly sensitive to processes applied in conventional extraction techniques, such as thermal, mechanical, and chemical stresses. In this regard, pulsed electric field (PEF) technology has emerged as a promising non-thermal alternative for recovering and producing natural colorings from food matrices. Its action mechanism on cell structures through the electroporation effect is a smart alternative to overcoming the challenging issues associated with producing natural colorants. In this scenario, this review provides an overview of the PEF assisted extraction of natural pigments and colorants, such as anthocyanins (red-blue-purple), betalains (red), carotenoids (yellow-orange-red), and chlorophylls (green) from plant sources. Moreover, the potential and limitations of this emerging technology to integrate the extraction process of natural colorants were discussed.

Rheological Behavior of Pectin Gels Obtained from Araçá (Psidium cattleianum Sabine) Fruits: Influence of DM, Pectin and Calcium Concentrations

In this work, purified pectins from Araçá fruits (Psidium cattleianum Sabine) were obtained and characterized after partial demethylation. On each prepared sample, the carboxylic yield was obtained by titration, the degree of methylation (DM) by ¹H-NMR, and the molecular weight distribution by steric exclusion chromatography (SEC). Then, the gelation ability in the presence of calcium counterions was investigated and related to DM (59-0%); the pectin concentration (2-10 g L^-1); and the CaCl₂ concentration (0.1-1 mol L^-1) used for dialysis. The critical pectin concentration for homogeneous gelation was above 2 g L^-1 when formed against 1 mol L^-1 CaCl₂. The elastic modulus (G') increased with pectin concentration following the relationship G'~C^2.8 in agreement with rigid physical gel network predictions. The purified samples APP and APP-A with DM ≥ 40% in the same conditions released heterogeneous systems formed of large aggregates. Gels formed against lower concentrations of CaCl₂ down to 0.1 mol L^-1 had a higher degree of swelling, indicating electrostatic repulsions between charged chains, thus, counterbalancing the Ca²⁺ cross-linkage. Compression/traction experiments demonstrated that an irreversible change in the gel structure occurred during small compression with an enhancement of the G' modulus.

Enzymatic Hydrolysis Modifies Emulsifying Properties of Okra Pectin

Okra pectins (OKPs) with diverse structures obtained by different extraction protocols have been used to study the relationship between their molecular structure and emulsifying properties. A targeted modification of molecular structure offers a more rigorous method for investigating the emulsifying properties of pectins. In this study, three glycoside hydrolases, polygalacturonase (PG), galactanase (GL), and arabinanase (AR), and their combinations, were used to modify the backbone and side-chains of OKP, and the relationships between the pectin structure and emulsion characteristics were examined by multivariate analysis. Enzymatic treatment significantly changed the molecular structure of OKP, as indicated by monosaccharide composition, molecular weight, and structure analysis. GL- and AR- treatments reduced side-chains, while PG-treatment increased side-chain compositions in pectin structure. We compared the performance of hydrolyzed pectins in stabilizing emulsions containing 50% v/v oil-phase and 0.25% w/v pectin. While the emulsions were stabilized by PG (93.3% stability), the emulsion stability was reduced in GL (62.5%), PG+GL+AR (37.0%), and GL+AR (34.0%) after 15-day storage. Furthermore, microscopic observation of the droplets revealed that emulsion destabilization was caused by flocculation and coalescence. Principal component analysis confirmed that neutral sugar side-chains are key for long-term emulsion stabilization and that their structure explains the emulsifying properties of OKP. Our data provide structure-function information applicable to the tailored extraction of OKP with good emulsification performance, which can be used as a natural emulsifier.