Silver-loaded carboxymethyl cellulose nonwoven sheet with controlled counterions for infected wound healing

Bioinspired wet adhesive carboxymethyl cellulose-based hydrogel with rapid shape adaptability and antioxidant activity for diabetic wound repair

Currently, adhesive hydrogels have shown promising effect in chronic diabetic wound repair. However, there are issues and challenges in treating diabetic wounds due to inadequate wet adhesion, unable to fill irregular and deep wounds, and oxidative stress. Herein, a mussel-inspired naturally hydrogel dressing with rapid shape adaptability, wet adhesion and antioxidant abilities for irregular, deep and frequently movement diabetic wounds repair was constructed by comprising catechol modified carboxymethyl cellulose (CMC-DA) and tannic acid. Benefiting from the reversible hydrogen bonding, the resulting hydrogels exhibited injectability, remarkable self-healing ability, rapid shape adaptability and strong tissue adhesion (45.9 kPa), thereby contributing to self-adaptive irregular-shaped wounds or moving joint parts. Especially, the adhesion strength of the hydrogel on wet tissue still remained at 14.9 kPa. Besides, the hydrogels could be easily detached from the skin by ice-cooling that avoided secondary damage caused by dressing change. Remarkably, the hydrogels possessed excellent antioxidant, satisfactory biocompatibility, efficient hemostasis and antibacterial properties. The in vivo evaluation further demonstrated that the hydrogel possessed considerable wound-healing promotion effect by regulating diabetic microenvironment, attributed to that the hydrogel could significantly reduce inflammatory response, alleviate oxidative stress and regulate neovascularization. Overall, this biosafe adhesive hydrogel had great potentials for diabetic wound management.

Thermal and biological properties of novel sodium carboxymethylcellulose-PPFMA nanocomposites containing biosynthesized Ag-ZnO hybrid filler

The aim of this study was to produce new nanocomposites with antimicrobial, antioxidant and anticancer properties that can be used in biomedical research based on carboxymethyl cellulose (NaCMC) biopolymer. First, poly(2-oxo-2-(pentafluorophenoxy)ethyl-2-methylprop-2-enoate) (PPFMA) was synthesized and characterized by FTIR and NMR techniques. It was then blended with NaCMC by in situ/hydrothermal method to produce a semi-synthetic functional material. Changes in the FTIR data of the blend and the single Tg value from DSC confirmed the compatibility of the blend. To enhance the thermal and biological properties of the NaCMC-PPFMA blend, biosynthesized Ag-ZnONPs were hydrothermally incorporated into the blend at different weight ratios. The prepared materials were characterized by SEM, EDX, TEM, XRD and FTIR. The thermal stability of the materials was determined by thermogravimetric analysis (TGA), and glass transition temperatures (Tg) was determined by differential scanning calorimeter (DSC). The oxidant, antioxidant, antimicrobial, and cytotoxic properties of PPFMA, Ag-ZnONPs, PPFMA-NaCMC blend, and nanocomposites were investigated in detail. The total oxidant state (TOS) value of the NaCMC-PPFMA blend, which was 0.72 μmol equivalent H2O2/L, increased to 7.2-10.4 μmol equivalent H2O2/L with the addition of Ag-ZnONPs. Ag-ZnONPs decreased total antioxidant state (TAS) levels of the nanocomposites while increasing their oxidant activity. Therefore, an increase in the antimicrobial activity of the nanocomposites was observed. Adding Ag-ZnONPs to the NaCMC-PPFMA blend increased the thermal stability by 22 °C and the Tg value by 9 °C. Finally, the potential of Ag-ZnONPs containing nanocomposites in wound healing therapies was examined. The findings suggest that nanocomposites prepared by incorporating Ag-ZnONPs into the semi-synthetic NaCMC-PPFMA blend can be a source of bio-safe raw materials and can be used as potential wound healers.

Polymer-Based Functional Materials Loaded with Metal-Based Nanoparticles as Potential Scaffolds for the Management of Infected Wounds

Wound infection due to bacterial invasion at the wound site is one of the primary challenges associated with delayed wound healing. Microorganisms tend to form biofilms that protect them from harm, leading to their multidrug resistance. The alarming increase in antibiotic resistance poses a threat to wound healing. Hence, the urgent need for novel wound dressing materials capable of managing bacterial infection is crucial for expediting wound recovery. There is considerable interest in polymeric wound dressings embedded with bioactive substances, such as metal-based nanoparticles, as potential solutions for treating microbially infected wounds. Metal-based nanoparticles have been widely used for the management of infected wounds due to their broad antimicrobial efficacy. This review focuses on polymer-based and bioactive wound dressings loaded with metal-based nanoparticles like silver, gold, magnesium oxide, or zinc oxide. When compared, zinc oxide-loaded dressings exhibited higher antibacterial activity against Gram-positive strains and silver nanoparticle-loaded dressings against gram-negative strains. However, wound dressings infused with both nanoparticles displayed a synergistic effect against both strains of bacteria. Furthermore, these dressings displayed antibiofilm activity and the generation of reactive oxygen species while accelerating wound closure both in vitro and in vivo.

Multifunctional soybean protein isolate-graft-carboxymethyl cellulose composite as all-biodegradable and mechanically robust mulch film for "green" agriculture

Multifunctional mulch films with robust mechanical behaviors of biopolymer-based biodegradable mulch materials were highly demanded in promoting the development of "green" agriculture. Herein, a sort of mechanically robust and all-biodegradable soybean protein isolate-graft‑sodium carboxymethyl cellulose composite mulch film was innovatively proposed through the amidation reactions between -COOH on protonated sodium carboxymethyl cellulose and -NH2 on soybean protein isolate. Arising from the reinforced intermolecular interactions upon chemical covalent bonds and physical hydrogen bonds, the maximum tensile strength and the elongation at break were increased from 10.61 MPa and 20.67 % for sodium carboxymethyl cellulose film to 42.15 MPa and 24.8 % for the optimized soybean protein isolate-graft‑sodium carboxymethyl cellulose composite mulch film, respectively. In addition, experimental results showed that the optimized soybean protein isolate-graft‑sodium carboxymethyl cellulose composite mulch film possesses soil moisture retention and controlled urea release properties. When employed as mulch film in practice, the cabbage seed presents higher germination when soil was covered with this versatile mulch film compared to commercial low-density polyethylene mulch film. Our discoveries build a prototype for the manufacture of eco-friendly mulch films with high mechanical strength, soil moisture retention, controlled urea release features.

Carboxymethyl cellulose gels immobilized Ag/AgCl-ZnO nanoparticles for improving sunlight-catalyzed antibacterial performance

Antibacterial sodium carboxymethyl cellulose (CMC) gels were prepared via immobilizing ZnO and/or Ag/AgCl in situ to inhibit the aggregation of nano-photocatalyst. Epichlorohydrin was used as a crosslinking agent to prepare CMC gel, simultaneously introducing chlorine-containing branch chains as Cl reservoir to deposit AgCl. The composite gels presented pH responsive swelling properties, with the minimum swelling ratio at pH 8 and pH 4 for CMC gels containing Ag/AgCl and ZnO, respectively. Zn2+ release from the nanocomposite gels was much greater in acidic than in neutral. Photocatalytic degradation constants of methyl orange by the composite gels under sunlight were greater than UV irradiation. Ag/AgCl loaded gel showed a degradation rate of 71.3 % under sunlight for 1 h, with a rate constant approximately 10.2 times higher than ZnO loaded gel. Extract liquids with the gel content below 0.33 mg/mL were noncytotoxicity. The nanocomposite gels presented good bactericidal rate against E. coli and S. aureus under sunlight for 6 h, comparatively to those in dark for 24 h. Bacteriostatic activity of Ag/AgCl loaded gel under sunlight for 6 h was much greater than that in dark for 24 h. The biocompatible nanocomposite gels with sunlight-catalyzed antibacterial activity would broaden the application of CMC gels.

Injectable and photothermal antibacterial bacterial cellulose cryogel for rapid hemostasis and repair of irregular and deep skin wounds

For irregular and deep skin wounds, it's difficult for wound dressing to reach the injured site to achieve rapid hemostasis and provide wound protection. Bacterial cellulose (BC) has high strength and natural three-dimensional pore structure, which endows it shape recovery ability after absorbing blood when injected to the wound. Therefore, in the study, an injectable aldehyde bacterial cellulose/polydopamine (DBC/PDA) photothermal cryogel was prepared by oxidation polymerization method for hemostasis and repair of irregular and deep skin wounds. BC was oxidized by NaIO4 to form DBC and dopamine (DA) was introduced into DBC by reacting with the aldehyde group in DBC through Schiff base reaction. Under oxidation effect of NaIO4 and with freezing condition, water crystallization led to local aggregation of DA and DBC, and at the same time DA was oxidized to PDA and polymerized with DA on DBC. After the melting process, the porous cryogel was obtained. The introduction of PDA enhances the photothermal properties of DBC/PDA cryogel. DBC/PDA cryogel can kill most bacteria and provide wound protection under near-infrared light. In vitro and in vivo hemostatic tests show that the DBC/PDA cryogel can quickly absorb blood and stop bleeding. Combined with its good injectable, DBC/PDA cryogel can provide rapid hemostatic and protection in the face of irregular and deep skin wounds.

Emerging Applications of Hydroxypropyl Methylcellulose Acetate Succinate: Different Aspects in Drug Delivery and Its Commercial Potential

Hydroxypropyl methylcellulose acetate succinate (HPMCAS) has multi-disciplinary applications spanning across the development of drug delivery systems, in 3D printing, and in tissue engineering, etc. HPMCAS helps in maintaining the drug in a super-saturated condition by inhibiting its precipitation, thereby increasing the rate and extent of dissolution in the aqueous media. HPMCAS has several distinctive characteristics, such as being amphiphilic in nature, having an ionization pH, and a succinyl and acetyl substitution ratio, all of which are beneficial while developing formulations. This review provides insights regarding the various types of formulations being developed using HPMCAS, including amorphous solid dispersion (ASD), amorphous nanoparticles, dry coating, and 3D printing, along with their applicability in drug delivery and biomedical fields. Furthermore, HPMCAS, compared with other carbohydrate polymers, shows several benefits in drug delivery, including proficiency in imparting stable ASD with a high dissolution rate, being easily processable, and enhancing bioavailability. The various commercially available formulations, regulatory considerations, and key patents containing the HPMCAS have been discussed in this review.

Lessons from the history of inorganic nanoparticles for inhalable diagnostics and therapeutics

The respiratory tract is one of the most accessible ones to exogenous nanoparticles, yet drug delivery by their means to it is made extraordinarily challenging because of the plexus of aerodynamic, hemodynamic and biomolecular factors at cellular and extracellular levels that synergistically define the safety and efficacy of this process. Here, the use of inorganic nanoparticles (INPs) for inhalable diagnostics and therapies of the lung is viewed through the prism of the history of studies on the interaction of INPs with the lower respiratory tract. The most conceptually and methodologically innovative and illuminative studies are referred to in the chronological order, as they were reported in the literature, and the trends in the progress of understanding this interaction of immense therapeutic and toxicological significance are being deduced from it. The most outstanding actual trends delineated include the diminishment of toxicity via surface functionalization, cell targeting, tagging and tracking via controlled binding and uptake, hybrid INP treatments, magnetic guidance, combined drug and gene delivery, use as adjuvants in inhalable vaccines, and other. Many of the understudied research directions, which have been accomplished by the nanostructured organic polymers in the pulmonary niche, are discussed. The progress in the use of INPs as inhalable diagnostics or therapeutics has been hampered by their well-recognized inflammatory potential and toxicity in the respiratory tract. However, the annual numbers of methodologically innovative studies have been on the rise throughout the past two decades, suggesting that this is a prolific direction of research, its comparatively poor commercial takings notwithstanding. Still, the lack of consensus on the effects of many INP compositions at low but therapeutically effective doses, the plethora of contradictory reports on ostensibly identical chemical compositions and NP properties, and the many cases of antagonism in combinatorial NP treatments imply that the rational design of inhalable medical devices based on INPs must rely on qualitative principles for the most part and embrace a partially stochastic approach as well. At the same time, the fact that the most studied INPs for pulmonary applications have been those with some of the thickest records of pulmonary toxicity, e.g., carbon, silver, gold, silica and iron oxide, is a silent call for the expansion of the search for new inorganic compositions for use in inhalable therapies to new territories.

Interdisciplinary Undergraduate Laboratory for an Integrated Chemistry/Biology Program: Synthesis of Silver Nanoparticles (AgNPs)-Cellulose Composite Materials with Antimicrobial Activity

This laboratory exercise integrates chemistry and biology concepts to give third/fourth-year undergraduate students an opportunity to apply knowledge from different subject areas to address a real-world biomedical issue such as pathogen inhibition using composite materials. It involves the preparation of a bacteria-derived cellulosic biopolymer through microbial cultivation, impregnation of the bacterial cellulose (BC) with silver nanoparticles (AgNPs), followed by the analysis of the materials and the antimicrobial properties of the biomaterial-AgNPs composites. The methods are relatively simple and use inexpensive chemicals. A Tollens type approach is adopted to produce silver nanoparticles-bacterial cellulose (AgNPs-BC) composites by the reduction of [Ag(NH₃)₂]⁺ complex embedded in the cellulose matrix. The samples were dried by two different methods: freeze-drying or vacuum-drying. The dried AgNPs-BC films were evaluated for antimicrobial properties against a test organism, in this example, Pseudomonas aeruginosa, a Gram-negative biosafety containment level 2 (BSL 2) bacterium, using an agar diffusion test. For additional flexibility and customization, options for dividing the chemistry/biology content of this laboratory into smaller units with an emphasis on characterization techniques of nanomaterials for chemistry majors are also discussed.

Formulation and Characterization of Ethyl Cellulose-Based Patches Containing Curcumin-Chitosan Nanoparticles for the Possible Management of Inflammation via Skin Delivery

Curcumin, a natural phenolic compound, exhibits poor absorption and extensive first pass metabolism after oral administration. In the present study, curcumin-chitosan nanoparticles (cur-cs-np) were prepared and incorporated into ethyl cellulose patches for the management of inflammation via skin delivery. Ionic gelation method was used for the preparation of nanoparticles. The prepared nanoparticles were evaluated for size, zetapotential, surface morphology, drug content, and % encapsulation efficiency. The nanoparticles were then incorporated into ethyl cellulose-based patches using solvent evaporation technique. ATR-FTIR was used to study/assess incompatibility between drug and excipients. The prepared patches were evaluated physiochemically. The in vitro release, ex vivo permeation, and skin drug retention studies were carried out using Franz diffusion cells and rat skin as permeable membrane. The prepared nanoparticles were spherical, with particle size in the range of 203–229 nm, zetapotential 25–36 mV, and PDI 0.27–0.29 Mw/Mn. The drug content and %EE were 53% and 59%. Nanoparticles incorporated patches are smooth, flexible, and homogenous. The in vitro release and ex vivo permeation of curcumin from nanoparticles were higher than the patches, whereas the skin retention of curcumin was significantly higher in case of patches. The developed patches deliver cur-cs-np into the skin, where nanoparticles interact with skin negative charges and hence result in higher and prolonged retention in the skin. The higher concentration of drug in the skin helps in better management of inflammation. This was shown by anti-inflammatory activity. The inflammation (volume of paw) was significantly reduced when using patches as compared to nanoparticles. It was concluded that the incorporation of cur-cs-np into ethyl cellulose-based patches results in controlled release and hence enhanced anti-inflammatory activity.

Antimicrobial-Loaded Polyacrylamide Hydrogels Supported on Titanium as Reservoir for Local Drug Delivery

Arthroplasty is a highly successful treatment to restore the function of a joint. The contamination of the implant via bacterial adhesion is the first step toward the development of device-associated infections. The emerging concern about antimicrobial resistance resulted in a growing interest to develop alternative therapeutic strategies. Thus, the increment in the incidence of bacterial periprosthetic infections, the complexity of treating infections caused by organisms growing in biofilms, together with the rise in antibiotic resistant bacteria, expose the need to design novel surfaces that provide innovative solutions to these rising problems. The aim of this work is to develop a coating on titanium (Ti) suitable for inhibiting bacterial adhesion and proliferation, and hence, biofilm formation on the surface. We have successfully prepared polyacrylamide hydrogels containing the conventional antibiotic ampicillin (AMP), silver nanoparticles (AgNPs), and both, AMP and AgNPs. The release of the antibacterial agents from the gelled to aqueous media resulted in an excellent antibacterial action of the loaded hydrogels against sessile S. aureus. Moreover, a synergic effect was achieved with the incorporation of both AMP and AgNPs in the hydrogel, which highlights the importance of combining antimicrobial agents having different targets. The polyacrylamide hydrogel coating on the Ti surface was successfully achieved, as it was demonstrated by FTIR, contact angle, and AFM measurements. The modified Ti surfaces having the polyacrylamide hydrogel film containing AgNPs and AMP retained the highest antibacterial effect against S. aureus as it was found for the unsupported hydrogels. The modified surfaces exhibit an excellent cytocompatibility, since healthy, flattened MC3T3-E1 cells spread on the surfaces were observed. In addition, similar macrophage RAW 264.7 adhesion was found on all the surfaces, which could be related to a low macrophage activation. Our results indicate that AMP and AgNP-loaded polyacrylamide hydrogel films on Ti are a good alternative for designing efficient antibacterial surfaces having an excellent cytocompatibility without inducing an exacerbated immune response. The approach emerges as a superior alternative to the widely used direct adsorption of therapeutic agents on surfaces, since the antimicrobial-loaded hydrogel coatings open the possibility of modulating the concentration of the antimicrobial agents to enhance bacterial killing, and then, reducing the risk of infections in implantable materials.

Synthesis of silver/Fe3O4@chitosan@polyvinyl alcohol magnetic nanoparticles as an antibacterial agent for accelerating wound healing

Bacterial infection causes wound inflammation and slows wound healing, posing a great threat to human health, which needs to explore more antibacterial nanobiomaterials to promote wound healing. Therefore, this study was conducted to develop low-cost silver/Fe₃O₄@Chitosan@polyvinyl alcohol (Ag/Fe₃O₄@CS@PVA) via a one-pot method to promote healing in bacteria-infected wounds. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier-transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometry (VSM) confirmed that Ag/Fe₃O₄@CS@PVA was successfully prepared. In vitro antibacterial experiments demonstrated strong antibacterial activity of Ag/Fe₃O₄@CS@PVA against Escherichia coli and Staphylococcus aureus. The Ag/Fe₃O₄@CS@PVA destroyed the bacterial cell membrane or internal structure, thus resulting in cell death for antibacterial effects. Cytotoxicity and hemolysis rate tests showed that Ag/Fe₃O₄@CS@PVA posed fine biocompatibility. In addition, in vivo assays confirmed that Ag/Fe₃O₄@CS@PVA not only promoted the healing of wound infection caused by bacteria, but also had no toxic effect on mouse organs. Therefore, the low-cost Ag/Fe₃O₄@CS@PVA nanocomposites have great potential in controlling 'bacterial' pathogen.

Biological Synthesis of Silver Nanoparticles by Amaryllis vittata (L.) Herit: From Antimicrobial to Biomedical Applications

The current study sought to synthesize silver nanoparticles (AgNPs) from Amaryllis vittata (L.) leaf and bulb extracts in order to determine their biological significance and use the toxic plants for human health benefits. The formation of silver nanoparticles was detected by a change in color from whitish to brown for bulb-AgNPs and from light green to dark brown for leaf-AgNPs. For the optimization of silver nanoparticles, various experimental physicochemical parameters such as pH, temperature, and salt were determined. UV-vis spectroscopy, Fourier transform infrared spectroscopy, X-ray dispersion spectroscopy, scanning electron microscopy, and energy dispersion spectroscopy analysis were used to characterize nanoparticles. Despite the fact that flavonoids in plant extracts were implicated in the reduction and capping procedure, the prepared nanoparticles demonstrated maximum absorbency between 400 and 500 nm. SEM analysis confirmed the preparation of monodispersed spherical crystalline particles with fcc structure. The bioinspired nanoparticles were found to show effective insecticidal activity against Tribolium castaneum and phytotoxic activity against Lemna aequincotialis. In comparison to plant extracts alone, the tested fabricated nanoparticles showed significant potential to scavenge free radicals and relieve pain. Antibacterial testing against human pathogenic strains, i.e., Escherichia coli and Pseudomonas aureginosa, and antifungal testing against Aspergillus niger revealed the significant potential for microbe resistance using AgNPs. As a result of the findings, the tested silver nanoparticles demonstrated promising potential for developing new and effective pharmacological and agricultural medications. Furthermore, the effects of biogenic AgNPs on an in vitro culture of Solanum tuberosum L. plants were investigated, and the findings indicated that bulb-AgNPs and leaf-AgNPs produced biomass and induced antioxidants via their active constituents. As a result, bulb-AgNPs and leaf-AgNPs may be recommended for use in Solanum tuberosum L. tissue culture for biomass fabrication and metabolic induction.

Nanocellulose-Based Composite Materials Used in Drug Delivery Systems

Nanocellulose has lately emerged as one of the most promising “green” materials due to its unique properties. Nanocellulose can be mainly divided into three types, i.e., cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and bacterial cellulose (BC). With the rapid development of technology, nanocellulose has been designed into multidimensional structures, including 1D (nanofibers, microparticles), 2D (films), and 3D (hydrogels, aerogels) materials. Due to its adaptable surface chemistry, high surface area, biocompatibility, and biodegradability, nanocellulose-based composite materials can be further transformed as drug delivery carriers. Herein, nanocellulose-based composite material used for drug delivery was reviewed. The typical drug release behaviors and the drug release mechanisms of nanocellulose-based composite materials were further summarized, and the potential application of nanocellulose-based composite materials was prospected as well.

Recent Advancements in Materials and Coatings for Biomedical Implants

Metallic materials such as stainless steel (SS), titanium (Ti), magnesium (Mg) alloys, and cobalt-chromium (Co-Cr) alloys are widely used as biomaterials for implant applications. Metallic implants sometimes fail in surgeries due to inadequate biocompatibility, faster degradation rate (Mg-based alloys), inflammatory response, infections, inertness (SS, Ti, and Co-Cr alloys), lower corrosion resistance, elastic modulus mismatch, excessive wear, and shielding stress. Therefore, to address this problem, it is necessary to develop a method to improve the biofunctionalization of metallic implant surfaces by changing the materials’ surface and morphology without altering the mechanical properties of metallic implants. Among various methods, surface modification on metallic surfaces by applying coatings is an effective way to improve implant material performance. In this review, we discuss the recent developments in ceramics, polymers, and metallic materials used for implant applications. Their biocompatibility is also discussed. The recent trends in coatings for biomedical implants, applications, and their future directions were also discussed in detail.

Antimicrobial Biomaterial on Sutures, Bandages and Face Masks with Potential for Infection Control

Antimicrobial resistance (AMR) is a challenge for the survival of the human race. The steady rise of resistant microorganisms against the common antimicrobials results in increased morbidity and mortality rates. Iodine and a plethora of plant secondary metabolites inhibit microbial proliferation. Antiseptic iodophors and many phytochemicals are unaffected by AMR. Surgical site and wound infections can be prevented or treated by utilizing such compounds on sutures and bandages. Coating surgical face masks with these antimicrobials can reduce microbial infections and attenuate their burden on the environment by re-use. The facile combination of Aloe Vera Barbadensis Miller (AV), Trans-cinnamic acid (TCA) and Iodine (I₂) encapsulated in a polyvinylpyrrolidone (PVP) matrix seems a promising alternative to common antimicrobials. The AV-PVP-TCA-I₂ formulation was impregnated into sterile discs, medical gauze bandages, surgical sutures and face masks. Morphology, purity and composition were confirmed by several analytical methods. Antimicrobial activity of AV-PVP-TCA-I₂ was investigated by disc diffusion methods against ten microbial strains in comparison to gentamycin and nystatin. AV-PVP-TCA-I₂ showed excellent antifungal and strong to intermediate antibacterial activities against most of the selected pathogens, especially in bandages and face masks. The title compound has potential use for prevention or treatment of surgical site and wound infections. Coating disposable face masks with AV-PVP-TCA-I₂ may be a sustainable solution for their re-use and waste management.

Hemostasis Evaluation of Antibacterial and Highly Absorbent Composite Wound Dressings in Animal Hemostasis Models

To reduce the bleeding time and to shorten the surgery time are vital to patients' prog-nosis, therefore, in this study, high moisture absorption nonwoven composites are proposed to attain hemostasis in time. Polyacrylate fiber and Tencel^® fibers at different blending ratios (10:90, 20:80, 30:70, 40:60, and 50:50) are used to form PT composite nonwoven. Next, composed of a 50:50 ratio, PT composite nonwoven exhibits the maximal vertical wicking height of 4.4 cm along the cross direction. Additionally, the UV-Vis absorption spectra analysis shows that at absorption waves of 413-415 nm, the occurring of distinct peaks suggests the presence of nanoparticles. The XRD patterns indicate the presence of silver nanoparticles with corresponding crystal planes of characteristic peaks at (111), (200), and (220). Polyacrylate/Tencel^® nonwoven composites exhibit comparable adsorption capacity of blood and water molecules. In particular, 30PT composite nonwoven outperforms the control group, exhibiting 3.8 times and 4.7 times greater the water absorption and blood absorption, respectively. Moreover, a great number of red blood cells with a size of 4-6 μm agglomerate among fibers as observed in SEM images, while 6hr-PT composite dressing demonstrates the optimal antibacterial efficacy against Escherichia coli and Staphylococcus aureus, proven by the zone of inhibition being 1.9 mm and 0.8 mm separately. When in contact with plasma, hemostasis composites have plasma hemostasis prothrombin time of 97.9%, and activated partial thromboplastin time of 96.7%. As for animal hemostasis model, the arteria over the rats' thigh bones is cut open perpendicularly, generating mass arteria hemorrhage. To attain hemostasis, it takes 46.5% shorter time when using composite dressings (experimental group) than the control group.