Computer simulation studies of microcrystalline cellulose Iβ

Elucidation of temperature-induced water structuring on cellulose surfaces for environmental and energy sustainability

Optimizing drying energy in the forest products industry is critical for integrating lignocellulosic feedstocks across all manufacturing sectors. Despite substantial efforts to reduce thermal energy consumption during drying, further enhancements are possible. Cellulose, the main component of forest products, is Earth's most abundant biopolymer and a promising renewable feedstock. This study employs all-atom molecular dynamics (MD) simulations to explore the structural dynamics of a small Iβ-cellulose microcrystallite and surrounding water layers during drying. Molecular and atomistic profiles revealed localized water near the cellulose surface, with water structuring extending beyond 8 Å into the water bulk, influencing solvent-accessible surface area and solvation energy. With increasing temperature, there was a ∼20 % reduction in the cellulose surface available for interaction with water molecules, and a ∼22 % reduction in solvation energy. The number of hydrogen bonds increased with thicker water layers, facilitated by a "bridging" effect. Electrostatic interactions dominated the intermolecular interactions at all temperatures, creating an energetic barrier that hinders water removal, slowing the drying processes. Understanding temperature-dependent cellulose-water interactions at the molecular level will help in designing novel strategies to address drying energy consumption, advancing the adoption of lignocellulosics as viable manufacturing feedstocks.

Cellulose-Callose Hydrogels: Computational Exploration of Their Nanostructure and Mechanical Properties

Polysaccharides play a crucial role in virtually all living systems. They also represent the biocompatible and fully sustainable component of a variety of nanoparticles, which are of increasing interest in biomedicine, food processing, cosmetics, and structural reinforcement of polymeric materials. The computational modeling of complex polysaccharide phases will assist in understanding the properties and behavior of all these systems. In this paper, structural, bonding, and mechanical properties of 10 wt % cellulose-callose hydrogels (β-glucans coexisting in plant cell walls) were investigated by atomistic simulations. Systems of this kind have recently been introduced in experiments revealing unexpected interactions between the polysaccharides. Starting from initial configurations inspired by X-ray diffraction data, atomistic models made of ∼1.6 × 106 atoms provide a qualitatively consistent view of these hydrogels, displaying stability, homogeneity, connectivity, and elastic properties beyond those of a liquid suspension. The simulation shows that the relatively homogeneous distribution of saccharide nanofibers and chains in water is not due to the solubility of cellulose and callose, but to the formation of a number of cross-links among the various sample components. The broad distribution of strength and elasticity among the links implies a degree of anharmonicity and irreversible deformation already evident at low external load. Besides the qualitative agreement with experimental observations, the simulation results display also quantitative disagreements in the estimation of elastic coefficients, such as the Young's modulus, that require further investigation. Complementary simulations of dense cellulose-callose mixtures (no hydrogels) highlight the role of callose in smoothing the contact surface of different nanofibers forming larger bundles. Cellulose-callose structures in these systems displayed an enhanced water uptake and delayed dye release when compared to cellulose alone, highlighting potential new applications as drug delivery scaffolds. The simulation trajectories provide a tuning and testing ground for the development of coarse-grained models that are required for the large scale investigation of mechanical properties of cellulose and callose mixtures in a watery environment.

Comprehensive evaluation of the chemical profile and antioxidant potential of buritirana (Mauritiella armata) an underexplored fruit from Brazilian Cerrado

Buritirana (Mauritella armata) is a fruit from a native Brazilian palm tree whose economic and industrial potential is still little explored. The nutritional composition and carbohydrates; organic acids; fatty acids; triacylglycerol; and phenolics profile of buritirana pulp, shells, and seeds were performed in this study. In addition, pH, color, ant total carotenoid, phenolic, flavonoids, flavonols, tannins, and antioxidant potential (ABTS, DPPH, ILP, FRAP, CUPRAC, and TRC) were determined in these parts of the fruit. The results indicated high lipid content and energy value for pulp (30.53 g 100 g-1, and 351.21 kcal 100 g-1, respectively) and shells (18.41 g 100 g-1, and 276.73 kcal 100 g-1, respectively). On the other hand, high fiber (63.09 g 100 g-1), starch (2.66 g 100 g-1), and carbohydrates (28.60 g 100 g-1) contents were observed for the seeds. Glucose was the main carbohydrate found in pulp and seed, while sucrose was the main sugar in shells. Tartaric acid was the predominant organic acid in pulp and shells (16.60 and 10.96 mg 100 g-1, respectively), while malic acid was the main organic acid in seeds (58.78 mg 100 g-1). Oleic and palmitic acid were the main fatty acids detected in buritirana pulp, shells, and seeds. Buritirana pulp and shells showed a high content of total phenolic and total flavonoid (918.58 and 940.63 mg GAE 100 g-1; and 679.31 and 444.94 mg CE 100 g-1, respectively). Moreover, a high antioxidant potential (DPPH•, CUPRAC, and ILP) was observed in the extracts obtained from pulp and shells. The pulp showed a significant content of carotenoids (270.23 μg g-1). Among the 28 phenolic compounds determined in buritirana pulp and seeds, and 27 in shells, 22 (pulp and seeds), and 21 (shells) were reported by first time in the literature. Ferulic acid in pulp and shells (99.39 and 111.69 μg g-1) and pinocembrin in seeds (19.21 μg g-1) were the main phenolic compounds identified in buritirana. Multivariate analysis showed high correlation of phenolic compounds on antioxidant potential. The results showed that buritirana is rich in nutrients and bioactive products and can be fully utilized. The products resulting from buritirana processing can be applied in the food, cosmetics, and pharmaceutical industries.

Assembly-driven protection from hydrolysis as key selective force during chemical evolution

The origins of biopolymers pose fascinating questions in prebiotic chemistry. The marvelous assembly proficiencies of biopolymers suggest they are winners of a competitive evolutionary process. Sophisticated molecular assembly is ubiquitous in life where it is often emergent upon polymerization. We focus on the influence of molecular assembly on hydrolysis rates in aqueous media and suggest that assembly was crucial for biopolymer selection. In this model, incremental enrichment of some molecular species during chemical evolution was partially driven by the interplay of kinetics of synthesis and hydrolysis. We document a general attenuation of hydrolysis by assembly (i.e., recalcitrance) for all universal biopolymers and highlight the likely role of assembly in the survival of the 'fittest' molecules during chemical evolution.

Cellulose assembles into helical bundles of uniform handedness in cell walls with abnormal pectin composition

Plant cells and organs grow into a remarkable diversity of shapes, as directed by cell walls composed primarily of polysaccharides such as cellulose and multiple structurally distinct pectins. The properties of the cell wall that allow for precise control of morphogenesis are distinct from those of the individual polysaccharide components. For example, cellulose, the primary determinant of cell morphology, is a chiral macromolecule that can self-assemble in vitro into larger-scale structures of consistent chirality, and yet most plant cells do not display consistent chirality in their growth. One interesting exception is the Arabidopsis thaliana rhm1 mutant, which has decreased levels of the pectin rhamnogalacturonan-I and causes conical petal epidermal cells to grow with a left-handed helical twist. Here, we show that in rhm1 the cellulose is bundled into large macrofibrils, unlike the evenly distributed microfibrils of the wild type. This cellulose bundling becomes increasingly severe over time, consistent with cellulose being synthesized normally and then self-associating into macrofibrils. We also show that in the wild type, cellulose is oriented transversely, whereas in rhm1 mutants, the cellulose forms right-handed helices that can account for the helical morphology of the petal cells. Our results indicate that when the composition of pectin is altered, cellulose can form cellular-scale chiral structures in vivo, analogous to the helicoids formed in vitro by cellulose nano-crystals. We propose that an important emergent property of the interplay between rhamnogalacturonan-I and cellulose is to permit the assembly of nonbundled cellulose structures, providing plants flexibility to orient cellulose and direct morphogenesis.

Molecular Dynamics of Drying-Induced Structural Transformations in a Single Nanocellulose

Nanocellulose is attracting attention in the field of materials science as a sustainable building block. Nanocellulose-based materials, such as films, membranes, and foams, are fabricated by drying colloidal dispersions. However, little is known about how the structure of a single nanocellulose changes during the complex drying process. Here, all-atom molecular dynamics simulations and atomic force microscopy is used to investigate the structural dynamics of single nanocellulose during drying. It is found that the twist morphology of the nanocellulose became localized along the fibril axis during the final stage of the drying process. Moreover, it is shown that conformational changes at C6 hydroxymethyl groups and glycoside bond is accompanied by the twist localization, indicating that the increase in the crystallinity occurred in the process. It is expected that the results will provide molecular insights into nanocellulose structures in material processing, which is helpful for the design of materials with advanced functionalities.

Flow and assembly of cellulose nanocrystals (CNC): A bottom-up perspective - A review

Cellulosic sources, such as lignocellulose-rich biomass, can be mechanically or acid degraded to produce inclusions called cellulose nanocrystals (CNCs). They have several uses in the sectors of biomedicine, photonics, and material engineering because of their biodegradability, renewability, sustainability, and mechanical qualities. The processing and design of CNC-based products are inextricably linked to the rheological behaviour of CNC suspension or in combination with other chemicals, such as surfactants or polymers; in this context, rheology offers a significant link between microstructure and macro scale flow behaviour that is intricately linked to material response in applications. The flow behaviour of CNC items must be properly specified in order to produce goods with value-added characteristics. In this review article, we provide new research on the shear rheology of CNC dispersion and CNC-based hydrogels in the linear and nonlinear regime, with storage modulus values reported to range from ~10^-3 to 10³ Pa. Applications in technology and material science are also covered simultaneously. We carefully examined the effects of charge density, aspect ratio, concentration, persistence length, alignment, liquid crystal formation, the cause of chirality in CNCs, interfacial behaviour and interfacial rheology, linear and nonlinear viscoelasticity of CNC suspension in bulk and at the interface using the currently available literature.

Understanding Nanocellulose-Water Interactions: Turning a Detriment into an Asset

Modern technology has enabled the isolation of nanocellulose from plant-based fibers, and the current trend focuses on utilizing nanocellulose in a broad range of sustainable materials applications. Water is generally seen as a detrimental component when in contact with nanocellulose-based materials, just like it is harmful for traditional cellulosic materials such as paper or cardboard. However, water is an integral component in plants, and many applications of nanocellulose already accept the presence of water or make use of it. This review gives a comprehensive account of nanocellulose-water interactions and their repercussions in all key areas of contemporary research: fundamental physical chemistry, chemical modification of nanocellulose, materials applications, and analytical methods to map the water interactions and the effect of water on a nanocellulose matrix.

Computational Design and Manufacturing of Sustainable Materials through First-Principles and Materiomics

Engineered materials are ubiquitous throughout society and are critical to the development of modern technology, yet many current material systems are inexorably tied to widespread deterioration of ecological processes. Next-generation material systems can address goals of environmental sustainability by providing alternatives to fossil fuel-based materials and by reducing destructive extraction processes, energy costs, and accumulation of solid waste. However, development of sustainable materials faces several key challenges including investigation, processing, and architecting of new feedstocks that are often relatively mechanically weak, complex, and difficult to characterize or standardize. In this review paper, we outline a framework for examining sustainability in material systems and discuss how recent developments in modeling, machine learning, and other computational tools can aid the discovery of novel sustainable materials. We consider these through the lens of materiomics, an approach that considers material systems holistically by incorporating perspectives of all relevant scales, beginning with first-principles approaches and extending through the macroscale to consider sustainable material design from the bottom-up. We follow with an examination of how computational methods are currently applied to select examples of sustainable material development, with particular emphasis on bioinspired and biobased materials, and conclude with perspectives on opportunities and open challenges.

In silico studies of plant primary cell walls - structure and mechanics

Primary plant cell wall (PCW) is a highly organized network, its performance is dependent on cellulose, hemicellulose and pectic polysaccharides, their properties, interactions and assemblies. Their mutual relationships and functions in the cell wall can be better understood by means of conceptual models of their higher-order structures. Knowledge unified in the form of a conceptual model allows predictions to be made about the properties and behaviour of the system under study. Ongoing research in this field has resulted in a number of conceptual models of the cell wall. However, due to the currently limited research methods, the community of cell wall researchers have not reached a consensus favouring one model over another. Herein we present yet another research technique - numerical modelling - which is capable of resolving this issue. Even at the current stage of development of numerical techniques, due to their complexity, the in silico reconstruction of PCW remains a challenge for computational simulations. However, some difficulties have been overcome, thereby making it possible to produce advanced approximations of PCW structure and mechanics. This review summarizes the results concerning the simulation of polysaccharide interactions in PCW with regard to network fine structure, supramolecular properties and polysaccharide binding affinity. The in silico mechanical models presented herein incorporate certain physical and biomechanical aspects of cell wall architecture for the purposes of undertaking critical testing to bring about advances in our understanding of the mechanisms controlling cells and limiting cell wall expansion.

Cellulose Iβ microfibril interaction with pristine graphene in water: Effects of amphiphilicity by molecular simulation

Graphene-cellulose interactions have considerable potential in the development of new materials. In previous computational work (Biomacromolecules2016, 16, 1771), we predicted that the model 100 hydrophobic surface of cellulose interacted favourably with pristine graphene in aqueous solution molecular dynamics simulations; conversely, a model of the hydrophilic 010 surface of cellulose exhibited progressive rearrangement to present a more hydrophobic face with the graphene, with weakened hydrogen bonds between cellulose chains and partial permeation of water. Here, we extend this work by simulating the interaction in aqueous solution of the amphiphilic 110 surface of a cellulose Iβ microfibril model, comprising 36 chains of 40 glucosyl residues, with an infinite sheet of pristine graphene. This face of the microfibril is of intermediate hydrophilicity and progressively associates with graphene over replicate simulations. As cellulose chains adhere to the graphene surface, forming interactions via its CH and OH groups, we observe a degree of local and global untwisting of the microfibril. Complementary rippling of the graphene surface is also observed, as it adapts to interaction with the microfibril. This adsorption process is accompanied by increased exclusion of water between cellulose and graphene although some water localises between chains at the immediate interface. The predicted propensity of a cellulose microfibril to adsorb spontaneously on the graphene surface, with mutual structural accommodation, highlights the amphiphilic nature of cellulose and the types of interactions that can be harnessed to design new graphene-carbohydrate biopolymer materials.

Molecular insights on the crystalline cellulose-water interfaces via three-dimensional atomic force microscopy

Cellulose, a renewable structural biopolymer, is ubiquitous in nature and is the basic reinforcement component of the natural hierarchical structures of living plants, bacteria, and tunicates. However, a detailed picture of the crystalline cellulose surface at the molecular level is still unavailable. Here, using atomic force microscopy (AFM) and molecular dynamics (MD) simulations, we revealed the molecular details of the cellulose chain arrangements on the surfaces of individual cellulose nanocrystals (CNCs) in water. Furthermore, we visualized the three-dimensional (3D) local arrangement of water molecules near the CNC surface using 3D AFM. AFM experiments and MD simulations showed anisotropic water structuring, as determined by the surface topologies and exposed chemical moieties. These findings provide important insights into our understanding of the interfacial interactions between CNCs and water at the molecular level. This may allow the establishment of the structure-property relationship of CNCs extracted from various biomass sources.

Naturally Derived Janus Cellulose Nanomaterials: Anisotropic Cellulose Nanomaterial Building Blocks and Their Assembly into Asymmetric Structures

Naturally derived cellulose nanomaterials (CNMs) with desirable physicochemical properties have drawn tremendous attention for their versatile applications in a broad range of fields. More recently, Janus amphiphilic cellulose nanomaterial particles with asymmetric structures (i.e., reducing and nonreducing ends and crystalline and amorphous domains) have been in the spotlight, offering a rich and sophisticated toolbox for Janus nanomaterials. With careful surface and interfacial engineering, Janus CNM particles have demonstrated great potential as surface modifiers, emulsifiers, stabilizers, compatibilizers, and dispersants in emulsions, nanocomposites, and suspensions. Naturally derived Janus CNM particles offer a fascinating opportunity for scaling up the production of self-standing Janus CNM membranes. Nevertheless, most Janus CNM membranes to date are constructed by asymmetric fabrication or asymmetric modification without considering the Janus traits of CNM particles. More future research should focus on the self-assembly of Janus CNM particles into bulk self-standing Janus CNM membranes to enable more straightforward and sustainable approaches for Janus membranes. This review explores the fabrication, structure-property relationship, and Janus configuration mechanisms of Janus CNM particles and membranes. Janus CNM membranes are highlighted for their versatile applications in liquid, thermal, and light management. This review also highlights the significant advances and future perspectives in the construction and application of sustainable Janus CNM particles and membranes.

Chiral Liquid Crystalline Properties of Cellulose Nanocrystals: Fundamentals and Applications

By using an independent self-assembly process that is occasionally controlled by evaporation, cellulose nanocrystals (CNCs) may create films (pure or in conjunction with other materials) that have iridescent structural colors. The self-forming chiral nematic structures and environmental safety of a new class of photonic liquid crystals (LCs), referred to as CNCs and CNC-embedded materials, make them simple to make and treat. The structure of the matrix interacts with light to give structural coloring, as opposed to other dye pigments, which interact with light by adsorption and reflection. Understanding how CNC self-assembly constructs structures is vital in several fields, including physics, science, and engineering. To constructure this review, the colloidal characteristics of CNC particles and their behavior during the formation of liquid crystals and gelling were studied. Then, some of the recognized applications for these naturally occurring nanoparticles were summarized. Different factors were considered, including the CNC aspect ratio, surface chemistry, concentration, the amount of time needed to produce an anisotropic phase, and the addition of additional substances to the suspension medium. The effects of alignment and the drying process conditions on structural changes are also covered. The focus of this study however is on the optical properties of the films as well as the impact of the aforementioned factors on the final transparency, iridescent colors, and versus the overall response of these bioinspired photonic materials. Control of the examined factors was found to be necessary to produce reliable materials for optoelectronics, intelligent inks and papers, transparent flexible support for electronics, and decorative coatings and films.

Probing the Structural Details of Chitin Nanocrystal-Water Interfaces by Three-Dimensional Atomic Force Microscopy

Chitin is one of the most abundant and renewable natural biopolymers. It exists in the form of crystalline microfibrils and is the basic structural building block of many biological materials. Its surface crystalline structure is yet to be reported at the molecular level. Herein, atomic force microscopy (AFM) in combination with molecular dynamics simulations reveals the molecular-scale structural details of the chitin nanocrystal (chitin NC)-water interface. High-resolution AFM images reveal the molecular details of chitin chain arrangements at the surfaces of individual chitin NCs, showing highly ordered, stable crystalline structures almost free of structural defects or disorder. 3D-AFM measurements with submolecular spatial resolution demonstrate that chitin NC surfaces interact strongly with interfacial water molecules creating stable, well-ordered hydration layers. Inhomogeneous encapsulation of the underlying chitin substrate by these hydration layers reflects the chitin NCs' multifaceted surface character with different chain arrangements and molecular packing. These findings provide important insights into chitin NC structures at the molecular level, which is critical for developing the properties of chitin-based nanomaterials. Furthermore, these results will contribute to a better understanding of the chemical and enzymatic hydrolysis of chitin and other native polysaccharides, which is also essential for the enzymatic conversion of biomass.

Building an extensible cell wall

This article recounts, from my perspective of four decades in this field, evolving paradigms of primary cell wall structure and the mechanism of surface enlargement of growing cell walls. Updates of the structures, physical interactions, and roles of cellulose, xyloglucan, and pectins are presented. This leads to an example of how a conceptual depiction of wall structure can be translated into an explicit quantitative model based on molecular dynamics methods. Comparison of the model's mechanical behavior with experimental results provides insights into the molecular basis of complex mechanical behaviors of primary cell wall and uncovers the dominant role of cellulose-cellulose interactions in forming a strong yet extensible network.

Cellulose Nanocrystals: Tensile Strength and Failure Mechanisms Revealed Using Reactive Molecular Dynamics

Cellulose nanocrystals (CNCs) offer excellent mechanical properties. However, measuring the strength by performing reliable experiments at the nanoscale is challenging. In this paper, we model Iβ crystalline cellulose using reactive molecular dynamics simulations. Taking the fibril twist into account, structural changes and hydrogen-bonding characteristics of CNCs during the tensile test are inspected and the failure mechanism of CNCs is analyzed down to the scale of individual bonds. The C4-O4 glycosidic bond is found to be responsible for the failure of CNCs. Finally, the effect of strain rate on ultimate properties is analyzed and a nonlinear model is used to predict the ultimate strength of 9.2 GPa and ultimate strain of 8.5% at a 1 s^-1 strain rate. This study sheds light on the applications of cellulose in nanocomposites and further modeling of cellulose nanofibres.

Modeling the cholesteric pitch of apolar cellulose nanocrystal suspensions using a chiral hard-bundle model

Cellulose nanocrystals (CNCs) are naturally sourced elongated nanocolloids that form cholesteric phases in water and apolar solvents. It is well accepted that CNCs are made of bundles of crystalline microfibrils clustered side-by-side, and there is growing evidence that each individual microfibril is twisted. Yet, the origin of the chiral interactions between CNCs remains unclear. In this work, CNCs are described with a simple model of chiral hard splinters, enabling the prediction of the pitch using density functional theory and Monte Carlo simulations. The predicted pitch P compares well with experimental observations in cotton-based CNC dispersions in apolar solvents using surfactants but also with qualitative trends caused by fractionation or tip sonication in aqueous suspensions. These results suggest that the bundle shape induces an entropy-driven chiral interaction between CNCs, which is the missing link in explaining how chirality is transferred from the molecular scale of cellulose chains to the cholesteric order.

An environment-friendly dip-catalyst with xylan-based catalytic paper coatings

Replacing catalyst supports with sustainable and degradable materials is an urgent task. Xylan is a type of abundant natural polymers with potential applications in dispersing, anchoring, and coating materials, but its material values have always been underestimated. In this study, polyethyleneimine modified dialdehyde xylan (DAX-PEI) was used as a dispersing and anchoring agent to bind Pd nanoparticles onto paper surface to produce a DAX-PEI-Pd coated paper, which was used to catalyze Suzuki-Miyaura reactions. The catalytic coated paper exhibited a good catalytic activity with a yield of 91% and a high turnover frequency (TOF) of 3300 h^-1. Besides, it showed an excellent recyclability with the same catalytic coated paper being used 15 times and still having a yield of nearly 90%. This environment-friendly catalytic coated paper owns its great prospect in organic synthesis.

Combining Computational Chemistry and Crystallography for a Better Understanding of the Structure of Cellulose

The approaches in this article seek to enhance understanding of cellulose at the molecular level, independent of the source and the particular crystalline form of cellulose. Four main areas of structure research are reviewed. Initially, the molecular shape is inferred from the crystal structures of many small molecules that have β-(1→4) linkages. Then, conformational analyses with potential energy calculations of cellobiose are covered, followed by the use of Atoms-In-Molecules theory to learn about interactions in experimental and theoretical structures. The last section covers models of cellulose nanoparticles. Controversies addressed include the stability of twofold screw-axis conformations, the influence of different computational methods, the predictability of crystalline conformations by studies of isolated molecules, and the twisting of model cellulose crystals.

Morphology of Nanometric Overlayers Made of Porphyrin-Type Molecules Physisorbed on Cellulose Iβ Crystals and Nanocrystals

Molecular dynamics simulations based on an atomistic empirical force field have been carried out to investigate structural, thermodynamic, and dynamical properties of adlayers made of porphyrin-type molecules physisorbed on surfaces of cellulose Iβ nanocrystals. The results show that low-index surfaces provide a thermally stable, weakly perturbing support for the deposition of non-hydrogen-bonded organic molecules. At submonolayer coverage, the discoidal porphyrin molecules lay flat on the surface, forming compact 2D clusters with clear elements of ordering. The adlayer grows layer-by-layer for the smallest porphyrin species on compact cellulose surfaces, while forming 3D clusters on a first relatively ordered adlayer (Stranski-Krastanov growth) in all other cases. The adsorption energy exceeds ∼1 eV per molecule, underlying the thermal stability of the adsorbate. Entropy plays a non-negligible role, destabilizing to some extent the adlayer. The in-plane dynamics of the smallest porphyrin species, i.e., porphine, on compact surfaces shows signs of superlubricity, due to the low energy and momentum exchange between the flat admolecule and the equally flat cellulose surface.

Nanoscale Wetting of Crystalline Cellulose

Cellulose possesses considerable potential for a wide range of sustainable applications. Nanocellulose-based material properties are primarily dependent on the structural surface characteristics of its crystalline planes. Experimental measurements of the affinity of crystalline nanocellulose surfaces with water are scarce and challenging to obtain. Therefore, the relative hydrophilicity of different cellulose allomorphs crystalline planes is often inferred from qualitative assessments of their surface and the exposition of polar groups to the solvent. This work investigates the relative hydrophilicity of cellulose surfaces using molecular dynamics simulations. The behavior of a water droplet laid on different crystal planes was used to determine their relative hydrophilicity. The water molecules fully spread onto highly hydrophilic surfaces. However, a water droplet placed on less hydrophilic surfaces equilibrates as an oblate spheroidal cap allowing the measurement of a contact angle. The results indicate that the Iα (010), Iα (11̅0), Iβ (010), and Iβ (110) faces, as well as the faces of human-made celluloses II and III_I (100), (11̅0), (010), and (110) are all highly hydrophilic. They all have a contact angle value inferior to 11°. Not unexpectedly, the Iα (001) and Iβ (100) surfaces are less hydrophilic with contact angles of 48 and 34°, respectively. However, the Iβ (11̅0) plane, often referred to as a hydrophilic surface, forms a contact angle of about 32°. The results are rationalized in terms of structure, exposure of hydroxyl groups to the solvent, and degree of cellulose-cellulose versus cellulose-water hydrogen bonds on each face. The simulations also show that the surface oxidation degree tunes the surface hydrophilicity in a nonlinear manner due to cooperative effects involving water-cellulose interactions. Our study helps us to understand how the degree of hydrophilicity of cellulose emerges from specific structural features of each crystalline surface.

Dynamical Water Ingress and Dissolution at the Amorphous-Crystalline Cellulose Interface

The use of cellulose has considerable promise in a wide range of industrial applications but is hampered by degradation in mechanical properties due to ambient moisture uptake. Existing models of equilibrium moisture content can predict the impact of these effects, but at present, the dynamical, atomic-scale picture of water ingress into cellulose is lacking. The present work reports nonequilibrium molecular simulations of the interface between cellulose and water aimed at capturing the initial stages of two simultaneous dynamical processes, water ingress into cellulose and cellulose dissolution into water. These simulations demonstrate that the process depends on the temperature and chain length in the amorphous region, where high temperatures can induce more mass exchange and short chains can easily detach from amorphous cellulose. A cooperative mechanism that involves both chemical and physical aspects, namely, hydrogen bonding and chain intertwining, respectively, is proposed to interpret the incipient dual ingress/dissolution process. Outcomes of this work will provide a foundation for cellulose functionalization strategies to impede moisture uptake and preserve the mechanical properties of nanocellulose in applications.

Forest Wood through the Eyes of a Cultural Conservator

If prehistoric and historical time were placed into the time span of the existence of our universe, then the act of archaeology could be defined as the act of digging up what was only buried yesterday. So, conservation is about preserving a moment that has just become past time, yet significant. It is a moment of human creativity and ingenuity. It is not strange that forest wood has become the material to convey such moments. Forest wood is a living, everlasting source growing without human intervention, within reach, easy to use and shape thinking both great and small. It does not have to be a wooden ship; it can be a mere piece of charcoal. For it is what surrounded humans in the past which archaeologists seek and use to weave human history, and what conservators bring back to context by reviving it. This work presents forest wood as an artefact and its preservation challenges as such. It touches on its natural degradation processes through burial, compromised properties and eventual conservation. Both dry and waterlogged wood are included. The overarching aim of this paper is to pay tribute, preserve and inspire the long-standing, open dialog and fruitful collaboration between cultural conservators and forest and wood scientists.

Tuning the Physicochemical Properties of Cellulose Nanocrystals through an In Situ Oligosaccharide Surface Modification Method

The trend to replace petroleum-based products with sustainable alternatives has shifted research efforts toward plant-based materials such as cellulose nanocrystals (CNCs). CNCs show promise in numerous applications (e.g., composites and rheological modifiers); however, maximizing their performance often requires surface modifications with complex chemistries and purification steps. Presented here is a novel surface modification method with the potential to tune CNC properties through the in situ deposition of cellulose phosphate oligosaccharides during CNC production. This was achieved by leveraging the selective solubility of oligosaccharides, which are soluble at a low pH (during the CNC hydrolysis) yet become insoluble and precipitate onto CNC surfaces upon increasing pH during quenching. Oligosaccharide-coated CNCs demonstrated subtle changes including higher surface charge densities and lower water adsorption capacities and viscosities than their unmodified counterparts. CNC surface coverage was tuned by controlling the oligosaccharide degree of polymerization. Overall, this fundamental study introduces an easily scalable modification route that opens the door for expanded CNC functionality and applications.

Nano-cellulose reinforced starch bio composite films- A review on green composites

Plastic-based food packaging is generating a serious environmental problem by accumulating large amounts of plastic in the surroundings. Ecological and health concerns are driving research efforts for developing biodegradable films. There are few alternatives that could reduce the environmental impact; one of them is to substitute petroleum-based plastic with starch-based film. Starch has remarkable properties, including biodegradability, sustainability, abundancy, and capable of being modified or blended with other polymers. However, low mechanical strength and low water resistance restrict its application in food packaging. Nanocellulose isolated from lignocellulosic fibers has attracted tremendous interest in the field of science due to high crystallinity and mechanical strength, unique morphology along with abundancy, renewability, and biodegradability. Therefore, nano cellulose as a reinforcer proved to be a good option for fabricating biocomposites for food packaging. The current review will give a critical snapshot of the potential application of nanocellulose in food packaging and discuss new challenges and opportunities for starch biocomposites enriched with nano cellulose.

Aging Characteristics of Transformer Oil-Impregnated Insulation Paper Based on Trap Parameters

Oil-impregnated insulation paper is an important part of transformers; its performance seriously affects the life of power equipment. It is of significance to study the aging characteristics and mechanism of oil-impregnated insulation paper under thermal stress for transformer status detection and evaluation. In the work, the accelerated thermal aging was carried out at 120 °C, and DP1490, DP787, and DP311 samples were selected to represent the new, mid-aging, and late-aging status of the transformer, respectively. The space charge distribution within the specimens was measured by the pulsed electro-acoustic (PEA) method and the trap parameters were extracted based on the measurement curves. Further, the aging mechanism was studied by molecular simulation technology. A typical molecular chain defect model was constructed to study the motion of cellulose molecules under thermal stress. The experimental results show that the corresponding trap energy levels are 0.54 eV, 0.73 eV, and 0.92 eV for the new specimen, the mid-aging specimen, and the late aging specimen, respectively. The simulation results show that the trapped energy at the beginning of aging is mainly determined by the loss of H atoms. The changes in trap energy in the middle stage of aging are mainly caused by the absence of some C atoms, and the trap energy level at the end of aging is mainly caused by the breakage of chemical bonds. This study is of great significance to reveal the aging mechanism of oil-impregnated insulation paper and the modification of insulation paper.

Wettability of cellulose surfaces under the influence of an external electric field

HYPOTHESIS

Interfacial tensions play an important role in dewatering of hydrophilic materials like nanofibrillated cellulose, and are affected by the molecular organization of water at the interface. Application of an electric field influences the orientation of water molecules along the field direction. Hence, it should be possible to alter the interfacial free energies to tune the wettability of cellulose surface through application of an external electric field thus, aiding the dewatering process.

SIMULATIONS

Molecular dynamics simulations of cellulose surface in contact with water under the influence of an external electric field have been conducted with GLYCAM-06 forcefield. The effect of variation in electric field intensity and directions on the spreading coefficient has been addressed via orientational preference of water molecules and interfacial free energy analyses.

FINDINGS

The application of electric field influences the interfacial free energy difference at the cellulose-water interface. The spreading coefficient increases with the electric field directed parallel to the cellulose-water interface while it decreases in the perpendicular electric field. Variation in interfacial free energies seems to explain the change in contact angle adequately in presence of an electric field. The wettability of cellulose surface can be tuned by the application of an external electric field.

Irregular and suppressed elastic deformation by a structural twist in cellulose nanofibre models

The elastic responsiveness of single cellulose nanofibres is important for advanced analysis of biological tissues and their use in sophisticated functional materials. However, the mechanical responsiveness derived from the twisted structure of cellulose nanofibres (CNFs) has remained unexplored. In this study, finite element simulations were applied to characterize the deformation response derived from the torsional structure by performing tensile and bending tests of an unconventionally very long and twisted rod model, having the known dimensional parameters and properties of CNFs. The antagonistic action of two types of structural elements (a contour twist and a curvilinear coordinate) was found to result in an irregular deformation response but with only small fluctuations. The contour twist generated rotational displacements under tensile load, but the curvilinear coordinate suppressed rotational displacement. Under bending stress, the contour twist minimized irregular bending deformation because of the orthotropic properties and made the bending stress transferability a highly linear response.

Release of internal molecular torque results in twists of Glaucocystis cellulose nanofibers

The cellulose of the green alga Glaucocystis consists of almost pure Iα crystalline phase where the corresponding lattice b* axis parameter lies perpendicular to the cell wall surface in the multilamellar cell wall architecture, indicating that in this wall, cellulose is devoid of longitudinal twist. In contrast, when isolated from Glaucosytis cell walls, the cellulose microfibrils present a twisting behavior, which was investigated using electron microscopy techniques. Sequential electron microdiffraction analyses obtained under frozen hydrated conditions revealed that the cellulose microfibrils continuously right-hand twisted in the vitreous ice layer. This observation implies that the twists of these nanofibers are intrinsic to the cellulose molecule and not a result of the cell wall biogenesis process. Furthermore, scaling with the fourth power of width based on the classic mechanics of solid, the twist angle was in agreement with the reported values in higher plant celluloses, implying that the twist arises from the balance between tendency of individual chains to twist and the structure imposed by the crystal packing. The observed twist in isolated fibrils of Glaucocystis indicates that one cannot assume the presence of cellulose twisting in vivo based on observations of isolated cellulose nanoparticles, as microfibril can exist untwisted in the original cell wall but become twisted when released from the wall.

Nanocellulose: Recent Fundamental Advances and Emerging Biological and Biomimicking Applications

In the effort toward sustainable advanced functional materials, nanocelluloses have attracted extensive recent attention. Nanocelluloses range from rod-like highly crystalline cellulose nanocrystals to longer and more entangled cellulose nanofibers, earlier denoted also as microfibrillated celluloses and bacterial cellulose. In recent years, they have spurred research toward a wide range of applications, ranging from nanocomposites, viscosity modifiers, films, barrier layers, fibers, structural color, gels, aerogels and foams, and energy applications, until filtering membranes, to name a few. Still, nanocelluloses continue to show surprisingly high challenges to master their interactions and tailorability to allow well-controlled assemblies for functional materials. Rather than trying to review the already extensive nanocellulose literature at large, here selected aspects of the recent progress are the focus. Water interactions, which are central for processing for the functional properties, are discussed first. Then advanced hybrid gels toward (multi)stimuli responses, shape-memory materials, self-healing, adhesion and gluing, biological scaffolding, and forensic applications are discussed. Finally, composite fibers are discussed, as well as nanocellulose as a strategy for improvement of photosynthesis-based chemicals production. In summary, selected perspectives toward new directions for sustainable high-tech functional materials science based on nanocelluloses are described.

Molecular Insight into the Cosolvent Effect on Lignin-Cellulose Adhesion

Understanding and controlling the physical adsorption of lignin compounds on cellulose pulp are key parameters in the successful optimization of organosolv processes. The effect of binary organic-aqueous solvents on the coordination of lignin to cellulose was studied with molecular dynamics simulations, considering ethanol and acetonitrile to be organic cosolvents in aqueous solutions in comparison to their monocomponent counterparts. The structures of the solvation shells around cellulose and lignin and the energetics of lignin-cellulose adhesion indicate a more effective disruption of lignin-cellulose binding by binary solvents. The synergic effect between solvent components is explained by their preferential interactions with lignin-cellulose complexes. In the presence of pure water, long-lasting H-bonds in the lignin-cellulose complex are observed, promoted by the nonfavorable interactions of lignin with water. Ethanol and acetonitrile compete with water and lignin for cellulose oxygen binding sites, causing a nonlinear decrease in the lignin-cellulose interactions with the amount of the organic component. This effect is modulated by the water exclusion from the cellulose solvation shell by the organic solvent component. The amount and rate of water exclusion depend on the type of organic cosolvent and its concentration.

Orienting Cellulose Nanocrystal Functionalities Tunes the Wettability of Water-Cast Films

Cellulose nanocrystal (CNC)-based materials display apparently erratic wetting behaviors with contact angle (CA) variations as large as 30° from sample to sample. This work hypothesizes that it is the orientation of CNC amphiphilic functionalities at the interface with air that causes the variability in CA. By exploiting relationships with the Hansen solubility parameter theory, a set of surface tension parameters is proposed for both the polar and the non-polar surfaces of cellulose I_β nanocrystals. These coefficients elucidate the wettability of CNC materials by establishing a correlation between the wetting properties of the air/sample interface and its chemical composition in terms of non-polar moieties. Advancing/receding CA experiments suggest that, while spin-coating CNC suspensions yield purely polar films, oven-casting them produces amphiphilic surfaces. We proposed a mechanism where the state of dispersion (individual or agglomerated) in which CNCs reach the air/water interface during casting is the determining factor: while individual nanocrystals find it more stable to orient their non-polar surfaces toward the interface, the aspect ratio of CNC agglomerates favors an orientation of their polar surfaces. This represents the first compelling evidence of CNC orientation at an interface and can be applied to Pickering emulsions and nanocomposites and to the production of CNC materials with tuned wettability.

Preferred crystallographic orientation of cellulose in plant primary cell walls

Cellulose, the most abundant biopolymer on earth, is a versatile, energy rich material found in the cell walls of plants, bacteria, algae, and tunicates. It is well established that cellulose is crystalline, although the orientational order of cellulose crystallites normal to the plane of the cell wall has not been characterized. A preferred orientational alignment of cellulose crystals could be an important determinant of the mechanical properties of the cell wall and of cellulose-cellulose and cellulose-matrix interactions. Here, the crystalline structures of cellulose in primary cell walls of onion (Allium cepa), the model eudicot Arabidopsis (Arabidopsis thaliana), and moss (Physcomitrella patens) were examined through grazing incidence wide angle X-ray scattering (GIWAXS). We find that GIWAXS can decouple diffraction from cellulose and epicuticular wax crystals in cell walls. Pole figures constructed from a combination of GIWAXS and X-ray rocking scans reveal that cellulose crystals have a preferred crystallographic orientation with the (200) and (110)/([Formula: see text]) planes preferentially stacked parallel to the cell wall. This orientational ordering of cellulose crystals, termed texturing in materials science, represents a previously unreported measure of cellulose organization and contradicts the predominant hypothesis of twisting of microfibrils in plant primary cell walls.

Computerized Molecular Modeling of Carbohydrates

Computerized molecular modeling continues to increase in capability and applicability to carbohydrates. This chapter covers nomenclature and conformational aspects of carbohydrates, perhaps of greater use to computational chemists who do not have a strong background in carbohydrates, and its comments on various methods and studies might be of more use to carbohydrate chemists who are inexperienced with computation. Work on the intrinsic variability of glucose, an overall theme, is described. Other areas of the authors' emphasis, including evaluation of hydrogen bonding by the atoms-in-molecules approach, and validation of modeling methods with crystallographic results are also presented.

Chirality from Cryo-Electron Tomograms of Nanocrystals Obtained by Lateral Disassembly and Surface Etching of Never-Dried Chitin

The complex nature of typical colloids and corresponding interparticle interactions pose a challenge in understanding their self-assembly. This specifically applies to biological nanoparticles, such as those obtained from chitin, which typically are hierarchical and multidimensional. In this study, we obtain chitin nanocrystals by one-step heterogeneous acid hydrolysis of never-dried crab residues. Partial deacetylation facilitates control over the balance of electrostatic charges (ζ-potential in the range between +58 and +75 mV) and therefore affords chitin nanocrystals (DE-ChNC) with axial aspect (170-350 nm in length), as determined by cryogenic transmission electron microscopy and atomic force microscopy. We find that the surface amines generated by deacetylation, prior to hydrolysis, play a critical role in the formation of individual chitin nanocrystals by the action of a dual mechanism. We directly access the twisting feature of chitin nanocrystals using electron tomography (ET) and uncover the distinctive morphological differences between chitin nanocrystals extracted from nondeacetylated chitin, ChNC, which are bundled and irregular, and DE-ChNC (single, straight nanocrystals). Whereas chitin nanocrystals obtained from dried chitin precursors are known to be twisted and form chiral nematic liquid crystals, our ET measurements indicate no dominant twisting or handedness for the nanocrystals obtained from the never-dried source. Moreover, no separation into typical isotropic and anisotropic phases occurs after 2 months at rest. Altogether, we highlight the critical role of drying the precursors or the nanopolysaccharides to develop chirality.

Recent advances in organosolv fractionation: Towards biomass fractionation technology of the future

Organosolv treatment is among the most promising strategies for valorising lignocellulosic biomass and could facilitate the transition towards enhanced utilization of renewable feedstocks. However, issues such as inefficient solvent recycle and fractionation has to be overcome. The present review aims to address these issues and discuss the role of the components present during organosolv treatment and their influence on the overall process. Thus, the review focuses not only on how the choice of solvent and catalyst affects lignocellulosic fractionation, but also on how the choice of treatment liquor influences the possibility for solvent recycling and product isolation. Several organic solvents have been investigated in combination with water and acid/base catalysts; however, the lack of a holistic approach often compromises the performance of the different operational units. Thus, an economically viable organosolv process should optimize biomass fractionation, product isolation, and solvent recycling.

Review on Bioenergy Storage Systems for Preserving and Improving Feedstock Value

Long-term storage is a necessary unit operation in the biomass feedstock logistics supply chain, enabling biorefineries to run year-round despite daily, monthly, and seasonal variations in feedstock availability. At a minimum, effective storage approaches must preserve biomass. Uncontrolled loss of biomass due to microbial degradation is common when storage conditions are not optimized. This can lead to physical and mechanical challenges with biomass handling, size reduction, preprocessing, and ultimately conversion. This review summarizes the unit operations of dry and wet storage and how they may contribute to preserving or even improving feedstock value for biorefineries.

Molecular Dynamics Simulation of Cellulose I-Ethylenediamine Complex Crystal Models

Cellulose I fibrils swell on exposure to ethylenediamine (EDA), which forms the cellulose I-EDA complex. These are regarded as host materials with guest intercalation. The present study reports molecular dynamics (MD) simulations of cellulose I-EDA crystal models with finite fiber to reproduce desorption of EDA molecules. The force field parameters for EDA were improved. Part of the EDA molecules was desorbed only from the surfaces of the crystal models, not from their interiors. The EDA molecules diffused through a hydrophilic channel composed of the hydrophilic edges of the cellulose chains, and their conformations and orientations changed. With the configuration of the cellulose chains being held, the vacant hydrophilic channel was immediately filled with water molecules. The innermost part of the crystal models, defined as a core unit, was partly deformed from the initial crystal structure, including the changes in the exocyclic group conformations of the cellulose chains and the orientations of the EDA molecules, coupled with partial reconfiguration of the intermolecular hydrogen bonding scheme. A possible crystalline conversion scheme after complete desorption of EDA has been discussed based on the present findings.

An inexpensive and environmentally friendly staining method for semi-permanent slides from plant material probed using anatomical and computational chemistry analyses

Abstract One of the main methods for plant anatomy study is the analysis of thin, transparent, and stained tissue sections. Synthetic dyes traditionally used in anatomical studies might be expensive and produced by specific companies. In contrast, the use of alternative industrial dyes can both represent an inexpensive substitute as well as an environmentally friendly option for conducting plant anatomy studies. In this study, a set of 22 textile dyes was evaluated. Transversal-, longitudinal, and paradermal sections of plant organs obtained using the freehand cutting technique were stained using hydroalcoholic solution (0 to 100%) of textile dyes purchased from a local market. Dyes mixed with 50% hydroalcoholic solution showed higher efficiency in tissue contrast, allowing greater solubility of dye powder and better solution interaction with the plant tissues. Most of the tested dyes showed satisfactory staining results. Cell wall, especially lignified one, showed higher staining efficiency. Computational docking analysis and molecular models of cellulose and lignin showed the probable association mechanisms and dye selectivity to cell wall constituents. Our findings suggest that the developed method can be useful in mixed practical classes of plant anatomy, chemistry, and/or biochemistry, both at high school as well as undergraduate levels.

Electron microdiffraction reveals the nanoscale twist geometry of cellulose nanocrystals

Nanocellulose consisting of crystalline cellulose nanoparticles has high potential to serve as a building block for bio-based functional materials. The intrinsic chirality of cellulose provides them with high added values such as optical properties and chiral induction ability. At the nanoscale, this chirality is connected to the right-handed longitudinal twisting of these fibrous crystallites. However, this nanoscale fibrillar twist has been a matter of debate due to contradictory data between ultrastructural observations and molecular simulations and so far, the exact twist geometry has not been elucidated. Here, an electron microdiffraction (μED) analysis under cryogenic conditions reveals the continuous twisting of cellulose nanocrystals (CNCs) in aqueous suspension. This intrinsic regular twist is drastically modified to a discontinuous sharp twist when the CNCs are dried on a flat surface. The present μED-based analysis at the single nanoparticle level allows the establishment of the quantitative structure-property relationship of various solid and colloidal nanocellulose systems.