Nanoscale crystalline architectures of Hofmann-type metal–organic frameworks

A 2-fold interpenetrating 3D pillar-layered MOF for the gas separation and detection of metal ions

A 2-fold interpenetrating 3D pillar-layered MOF, which was assembled from a mixed-linker and paddle-wheel cluster, was successfully synthesized. It possesses good thermal and water stability as well as high selectivity for C2H6 over CH4 and CO2 over N2 under ambient conditions, which was further proved by breakthrough experiments. Moreover, this porous material exhibits good detection of Cu2+, [Co(NH3)6]3+ and Fe3+ in an aqueous solution.

Thermal and Light-Induced Spin Transitions in 3D Hofmann-type Frameworks Built on Nonlinear 3-Substituted Pyridine and Pyrimidine Pillaring Ligands

Integration of spin crossover (SCO) properties in 3D frameworks made up of cyano-bimetallic layers connected through pillaring organic ligands, the so-called Hofmann-type coordination polymers (HCPs)- represents an important source of multifunctional advanced materials. Typically, these 3D structures are constituted by 4-substituted pyridine-based linear pillars which afford HCPs with regular pcu topology. Here, we have investigated the suitability of the 3-substituted pyridine and pyrimidine bis-monodentate ligands 2,5-di(pyridin-3-yl)aniline (3-dpyan) and 2,5-di(pyrimidin-5-yl)aniline (bpmdan) as alternative building blocks to explore new structural topologies and functionalities. In this context, we have prepared the compounds Fe(3-dpyan)[Ag(CN)2]2·2MeOH (1Ag·2MeOH), Fe(3-dpyan)[Ag(CN)2]2···0.35NO2Bz·MeOH (1Ag·0.35NO2Bz·MeOH), Fe(3-dpyan)[Au(CN)2]2·NO2Bz (1Au·NO2Bz), and Fe(bpmdan)[Ag(CN)2]2·CH3Bz (2Ag·CH3Bz) (MeOH = methanol, NO2Bz = nitrobenzene, CH3Bz = toluene). Our structural studies have revealed that 1Ag·2MeOH and 1Ag·0.35NO2Bz·MeOH exhibit isomorphous doubly interpenetrated 3D structures strongly differing from the unusual noninterpenetrated ones exhibited by 1Au·NO2Bz and 2Ag·CH3Bz. Temperature-dependent magnetic susceptibility measurements have shown that all the reported compounds exhibit thermal-induced SCO properties, and moreover, three of them display Light Induced Excited Spin State Trapping at low temperatures (LIESST effect). The studied compounds show a wide diversity of SCO behaviors, ranging from abrupt complete one-step SCO centered at 253 K (1Au·NO2Bz) to gradual and incomplete multistepped SCO centered at 120 K (1Ag·0.35NO2Bz·MeOH). This assorted SCO properties are discussed and correlated to the acquired chemical and structural information.

Observation of TLIESST above Liquid Nitrogen Temperature and Disclosure of Hidden Hysteresis in Multiresponsive Hofmann-type Coordination Polymers

Photoresponsive spin-crossover (SCO) molecules are an important class of bistable magnetic molecules with intriguing potential in device applications. The light-induced excited spin state trapping (LIESST) and the combined application of light and temperature can provide access to the metastable region of the SCO profile. The primary obstacle in utilizing light stimuli is the manifestation of light-induced trappings at extremely low temperatures. Herein, we report two novel multiresponsive 2D Hofmann-type coordination polymers exhibiting light-induced excited spin state trapping above liquid nitrogen temperature (TLIESST = 82 and 81 K). Stimulating the samples in conjugation with light and temperature successfully unveils hysteresis, which is otherwise concealed. Apart from light and temperature, we found that the SCO phenomenon is also responsive to external hydrostatic pressure and exhibits modulation of the hysteresis width and transition temperature shifts with changes in pressure.

Challenges for exploiting nanomagnet properties on surfaces

Molecular complexes with single-molecule magnet (SMM) or qubit properties, commonly called molecular nanomagnets, are great candidates for information storage or quantum information processing technologies. However, the implementation of molecular nanomagnets in devices for the above-mentioned applications requires controlled surface deposition and addressing the nanomagnets' properties on the surface. This Perspectives paper gives a brief overview of molecular properties on a surface relevant for magnetic molecules and how they are affected when the molecules interact with a surface; then, we focus on systems of increasing complexity, where the relevant SMMs and qubit properties have been observed for the molecules deposited on surfaces; finally, future perspectives, including possible ways of overcoming the problems encountered so far are discussed.

Guest-Induced Reversible Single-Crystal-to-Single-Crystal Transformation Involving Displacement of 2D Layers and Spin Crossover Behavior Change in a Hofmann-Type Coordination Polymer

A novel two-dimensional (2D) Hofmann-type coordination polymer, {FeII(PyHbim)2[Pd(CN)4]}·2CH3OH [1·2CH3OH, PyHbim = 2-(4-pyridyl)benzimidazole], has been synthesized, which can undergo a spontaneous guest exchange, transforming to 1·2H2O in a single-crystal-to-single-crystal (SCSC) manner, shifting from orthorhombic Cmmm to monoclinic C2/m involving the displacement of 2D layers. The solvent-induced SCSC transformation process was reversible and verified through powder X-ray diffraction (PXRD) and single-crystal X-ray crystallography analyses. Both 1·2CH3OH and 1·2H2O exhibit complete and abrupt spin crossover (SCO) behaviors in two steps, while their SCO temperature ranges drastically shift by ca.100 K, spanning room temperature, owing to different intermolecular interactions resulting from diverse interlayer packing manners and host-guest interactions. Besides, a structural phase transition is observed in 1·2CH3OH, contributing to the two-step spin transition.

Spin crossover in {Fe(pyrazine)[M(CN)4]} (M = Ni, Pt) thin films assembled on fused silica substrates

Thin films with thicknesses in the range between ca. 10-50 nm of the spin crossover (SCO) compound {Fe(pyrazine)[μ4-M(CN)4]} (M = Ni, Pt) have been deposited on fused silica substrates using a sequential assembly method and 4-pyridinecarboxylic acid as anchoring layer. Film morphology and crystallinity were assessed by means of atomic force microscopy and grazing incidence X-ray diffraction, respectively. The intensity of the π-π* transition of the pyrazine ligand at 270 nm, being rather insensitive to the spin state of the complex, was used to follow the film growth as a function of different deposition parameters. On the other hand, the spin state changes were inferred from the temperature dependence of absorption bands appearing at 540, 490 and 310 nm in the low spin state. In line with their amorphous nature, each film displays a very gradual thermal spin crossover between ca. 100-300 K, independently of its thickness and deposition conditions. These results are not only interesting to better understand the effects of size reduction and organization on the SCO phenomenon, but the deposition of these SCO compounds on electrically insulating and/or optically transparent oxide surfaces opens also the door for various photonic or electronic applications.

Hofmann-Type Cyanide Bridged Coordination Polymers for Advanced Functional Nanomaterials

Since the discovery of Hofmann clathrates of inorganic cyanide bridged coordination polymers (Hofmann-type CN-CPs), extensive research is done to understand their behavior during spin transitions caused by guest molecules or external stimuli. Lately, research on their nanoscale architectures for sensors and switching devices is of interest. Their potential is reported for producing advanced functional inorganic materials in two-dimensional (2D) morphology using a scalable solid-state thermal treatment method. For instance, but not restricted to, alloys, carbides, chalcogenides, oxides, etc. Simultaneously, their in situ crystallization at graphene oxide (GO) nanosheet surfaces, followed by a subsequent self-assembly to build layered lamellar structures, is reported providing hybrid materials with a variety of uses. Hence, an overview of the most recent developments is presented here in the synthesis of nanoscale structures, including thin films and powders, using Hofmann-type CN-CPs. Also thoroughly demonstrated are the most recent synthetic ideas with the modest control over the size and shape of nanoscale particles. Additionally, in order to create new functional hybrid materials for electrical and energy applications, their thermal decomposition in various environments and hybridization with GO and other guest molecules is examined. This review article also conveyed their spin transition, astounding innovative versatile adhesives, and structure features.

Constructing Nitrogen-Doped Carbon Hierarchy Structure Derived from Metal-Organic Framework as High-Performance ORR Cathode Material for Zn-Air Battery

The development of efficient and low-cost catalysts for cathodic oxygen reduction reaction (ORR) in Zn-air battery (ZAB) is a key factor in reducing costs and achieving industrialization. Here, a novel segregated CoNiPt alloy embedded in N-doped porous carbon with a nanoflowers (NFs)-like hierarchy structure is synthesized through pyrolyzing Hofmann-type metal-organic frameworks (MOFs). The unique hierarchical NFs structure exposes more active sites and facilitates the transportation of reaction intermediates, thus accelerating the reaction kinetics. Impressively, the resulting 15% CoNiPt@C NFs catalyst exhibits outstanding alkaline ORR activity with a half-wave potential of 0.93 V, and its mass activity is 7.5 times higher than that of commercial Pt/C catalyst, surpassing state-of-the-art noble metal-based catalysts. Furthermore, the assembled CoNiPt@C+RuO2 ZAB demonstrates a maximum power density of 172 mW cm-2 , which is superior to that of commercial Pt/C+RuO2 ZAB. Experimental results reveal that the intrinsic ORR mass activity is attributed to the synergistic interaction between oxygen defects and pyrrolic/graphitic N species, which optimizes the adsorption energy of the intermediate species in the ORR process and greatly enhances catalytic activity. This work provides a practical and feasible strategy for synthesizing cost-effective alkaline ORR catalysts by optimizing the electronic structure of MOF-derived catalysts.

Fabrication of Oriented Polycrystalline MOF Superstructures

The field of metal-organic frameworks (MOFs) has progressed beyond the design and exploration of powdery and single-crystalline materials. A current challenge is the fabrication of organized superstructures that can harness the directional properties of the individual constituent MOF crystals. To date, the progress in the fabrication methods of polycrystalline MOF superstructures has led to close-packed structures with defined crystalline orientation. By controlling the crystalline orientation, the MOF pore channels of the constituent crystals can be aligned along specific directions: these systems possess anisotropic properties including enhanced diffusion along specific directions, preferential orientation of guest species, and protection of functional guests. In this perspective, we discuss the current status of MOF research in the fabrication of oriented polycrystalline superstructures focusing on the specific crystalline directions of orientation. Three methods are examined in detail: the assembly from colloidal MOF solutions, the use of external fields for the alignment of MOF particles, and the heteroepitaxial ceramic-to-MOF growth. This perspective aims at promoting the progress of this field of research and inspiring the development of new protocols for the preparation of MOF systems with oriented pore channels, to enable advanced MOF-based devices with anisotropic properties.

Simultaneous magneto-dielectric transitions in a fluorescent Hofmann-type coordination polymer

The design of magnetic molecular materials exhibiting multiple functions has garnered significant interest owing to their potential applications in molecular switches, sensors, and data storage devices. In this study, we synthesized a two-dimensional (2D) FeII-based Hofmann-type coordination polymer, namely {Fe(DPPE)2[Ag(CN)2]2}·2EtOH (1), using a luminescent ligand 1,1-diphenyl-2,2-di(4-pyridylbiphenyl)ethylene (DPPE). Single-crystal structural analyses and magnetic measurements revealed a thermally induced spin crossover (SCO) with the transition temperature T1/2 = 231 K. Variable-temperature fluorescence emission spectra indicated the coexistence of spin crossover and fluorescence properties. Moreover, a pronounced dielectric change (Δε' = 1.2 at 0.5 kHz) was observed during the SCO process, confirming the simultaneous magnetic and dielectric switching arising from the rearrangement of 3d electrons and deformation of the FeII-centered coordination sphere. This work provides an approach to explore the interplay between magnetic, dielectric, and fluorescence properties, and holds significance for developing multifunctional molecular materials.

Thermodynamic Separation of Hydrogen Isotopes Using Hofmann-Type Metal-Organic Frameworks with High-Density Open Metal Sites

Hydrogen isotope separation with nanoporous materials is a very challenging yet promising approach. To overcome the limitation of the conventional isotope separation strategy, quantum sieving-based separation using nanoporous materials has been investigated recently. In this study, to see the thermodynamic deuterium separation phenomena attributed to the chemical affinity quantum sieving effect, we examine Hofmann-type metal-organic frameworks (MOFs), Co(pyz)[M(CN)₄] (pyz = pyrazine, M = Pd²⁺, Pt²⁺, and Ni²⁺), which have microporosity (4.0 × 3.9 Ų) and an extraordinarily high density of open metal sites (∼9 mmol/cm³). Owing to the preferential adsorption of D₂ over H₂ at strongly binding open metal sites, the Hofmann-type MOF, Co(pyz)[Pd(CN)₄] exhibited a high selectivity (S_D2/H2) of 21.7 as well as a large D₂ uptake of 10 mmol/g at 25 K. This is the first study of Hofmann-type MOFs to report high selectivity and capacity, both of which are important parameters for the practical application of porous materials toward isotope separation.

Spin-State Modulation in FeII -Based Hofmann-Type Coordination Polymers: From Molecules to Materials

Spin crossover complexes that reversibly interconvert between two stable states imitate a binary state of 0 and 1, delivering a promising possibility to address the data processing concept in smart materials. Thus, a comprehensive understanding of the modulation of magnetic transition between high spin and low spin and the factors responsible for stabilizing the spin states is an essential theme in modern materials design. In this context, the present review attempts to provide a concise outline of the design strategy employed at the molecular level for fine-tuning the spin-state switching in Fe^II -based Hofmann-type coordination polymers and their effects on the optical and magnetic response. In addition, development towards the nanoscale architectures of HCPs, i. e., in terms of nanoparticles and thin films, are emphasized to bridge the gap between the laboratory and reality.

Local Coordination and Electronic Structure Ramifications of Guest-Dependent Spin Crossover in a Metal-Organic Framework: A Combined X-ray Absorption and Emission Spectroscopy Study

The porous Hoffman-type 3D lattice Fe(pz)[Ni^II(CN)₄] exhibits thermally induced spin-crossover (SCO) behavior that is dependent on the solvent guest species occupying the pores. Here, in situ Fe K-edge X-ray absorption spectroscopy (XAS) and both non-resonant and resonant Kβ X-ray emission spectroscopy (XES) methods are used to probe this framework under two solvent environments that yield different extremes of spin crossover temperature: acetonitrile and toluene. While the acetonitrile pore environment engenders an SCO response around room temperature, toluene guests stabilize the high spin state and effectively suppress SCO behavior throughout the ambient temperature range. The multipronged X-ray spectroscopy approach simultaneously confirmed this spin crossover behavior and provided new local coordination and electronic structural insights of the framework under these two solvent environments. Extended X-ray absorption fine structure analysis revealed spin state and solvent guest-dependent differences in coordination bond lengths and structural disorder. Resonant XES measurements produced high-resolution XAS spectra with distinct pre-edge and edge features, whose assignment was established using both simple ligand field theory and time-dependent density-functional theory calculations and further supported by their observed resonance behavior in the 2D RXES plane. Edge feature variation with the Fe spin state was interpreted to reveal changes in specific metal-linker bond covalency.

New family of Hofmann-like coordination polymers constructed with imidazole ligands and associated with spin crossover and anisotropic thermal expansions

A new series of Hofmann-like compounds made with imidazole ligands display interesting properties.

Old Materials for New Functions: Recent Progress on Metal Cyanide Based Porous Materials

Cyanide is the simplest ligand with strong basicity to construct open frameworks including some of the oldest compounds reported in the history of coordination chemistry. Cyanide can form numerous cyanometallates with different transition metal ions showing diverse geometries. Rational design of robust extended networks is enabled by the strong bonding nature and high directionality of cyanide ligand. By virtue of a combination of cyanometallates and/or organic linkers, multifunctional framework materials can be targeted and readily synthesized for various applications, ranging from molecular adsorptions/separations to energy conversion and storage, and spin-crossover materials. External guest- and stimuli-responsive behaviors in cyanide-based materials are also highlighted for the development of the next-generation smart materials. In this review, an overview of the recent progress of cyanide-based multifunctional materials is presented to demonstrate the great potential of cyanide ligands in the development of modern coordination chemistry and material science.

Strain-Controlled Spin Transition in Heterostructured Metal-Organic Framework Thin Film

Metal-organic framework (MOF) thin films have recently attracted much attention as a new platform for surface/interface research, where unconventional structural and physical properties emerge. Among the many MOFs as candidates for fabrication of thin films, Hofmann-type MOFs {Fe(pz)[M(CN)₄]} [pz = pyrazine; M = Ni (Nipz), M = Pt (Ptpz)] are attractive, because they undergo spin transitions with concomitant structural changes. Here, we demonstrate the first example of a strain-controlled spin transition in heterostructured MOF thin films. The spin transition temperature of Ptpz can be controlled in the temperature range of 300-380 K by fabricating a nanometer-sized heterostructured thin film with a Nipz buffer layer, where the smaller lattice of Nipz causes epitaxial compressive strain to the Ptpz layer. The fabricated heterostructured thin film exhibited a remarkable increase in spin transition temperature with a dynamic structural transformation, confirmed by variable-temperature (VT) X-ray diffraction and VT Raman spectroscopy. By verifying interfacial strain in a heterostructured thin film, we can rationally control the characteristics of MOFs-not only spin transition but also various physical properties such as gas storage, catalysis, sensing, proton conductivity, and electrical properties, among others.

Organic guest molecule induced ultrafast breathing of an epitaxially grown metal-organic framework on a self-assembled monolayer

We report epitaxially grown new two-dimensional metal-organic framework (MOF) thin films on a self-assembled monolayer (SAM). We fabricated these epitaxial thin-films using stepwise layer-by-layer seeding followed by solvothermal treatment. The MOF thin films exhibit ultrafast structural flexibility (through breathing) compared to their bulk samples upon uptake of organic guest molecules.

Bistable Hofmann-Type FeII Spin-Crossover Two-Dimensional Polymers of 4-Alkyldisulfanylpyridine for Prospective Grafting of Monolayers on Metallic Surfaces

Aiming at investigating the suitability of Hofmann-type two-dimensional (2D) coordination polymers {FeII(Lax)2[MII(CN)4]} to be processed as single monolayers and probed as spin crossover (SCO) junctions in spintronic devices, the synthesis and characterization of the MII derivatives (MII = Pd and Pt) with sulfur-rich axial ligands (Lax = 4-methyl- and 4-ethyl-disulfanylpyridine) have been conducted. The thermal dependence of the magnetic and calorimetric properties confirmed the occurrence of strong cooperative SCO behavior in the temperature interval of 100-225 K, featuring hysteresis loops 44 and 32.5 K/21 K wide for PtII-methyl and PtII/PdII-ethyl derivatives, while the PdII-methyl derivative undergoes a much less cooperative multistep SCO. Excluding PtII-methyl, the remaining compounds display light-induced excited spin-state trapping at 10 K with TLIESST temperatures in the range of 50-70 K. Single-crystal studies performed in the temperature interval 100-250 K confirmed the layered structure and the occurrence of complete transformation between the high- and low-spin states of the FeII center for the four compounds. Strong positional disorder seems to be the source of elastic frustration driving the multistep SCO observed for the PdII-methyl derivative. It is expected that the peripheral disulfanyl groups will favor anchoring and growing of the monolayer on gold substrates and optimal electron transport in the device.

State-of-the-art progress of switch fluorescence biosensors based on metal-organic frameworks and nucleic acids

Metal-organic frameworks (MOFs) have captured substantial attention of an increasing number of scientists working in sensing analysis fields, due to their large surface area, high porosity, and tunable structure. Recently, MOFs as attractive fluorescence quenchers have been extensively investigated. Given their high quenching efficiency toward the fluorescence intensity of dyes-labeled specific biological recognition molecules, such as nucleic acids, MOFs have been widely developed to switch fluorescence biosensors with low background fluorescence signal. These strategies not only lead to specificity, simplicity, and low cost of biosensors, but also possess advantages such as ultrasensitive, rapid, and multiple detection of switch fluorescence methods. At present, researches of the analysis of switch fluorescence biosensors based on MOFs and nucleic acids mainly focus on sensing of different types of in vitro and intracellular analytes, indicating their increasing potential. In this review, we briefly introduce the principle of switch fluorescence biosensor and the mechanism of fluorescence quenching of MOFs, and mainly discuss and summarize the state-of-the-art advances of MOFs and nucleic acids-based switch fluorescence biosensors over the years 2013 to 2020. Most of them have been proposed to the in vitro detection of different types of analytes, showing their wide scope and applicability, such as deoxyribonucleic acid (DNAs), ribonucleic acid (RNAs), proteins, enzymes, antibiotics, and heavy metal ions. Besides, some of them have also been applied to the bioimaging of intracellular analytes, emerging their potential for biomedical applications, for example, cellular adenosine triphosphate (ATP) and subcellular glutathione (GSH). Finally, the remaining challenges in this sensing field and prospects for future research trends are addressed. Graphical abstract.

Electrostatically Driven Selective Adsorption of Carbon Dioxide over Acetylene in an Ultramicroporous Material

Separating acetylene from carbon dioxide is important but highly challenging owing to their similar physical properties and molecular dimensions. Herein, we report highly efficient electrostatically driven CO2 /C2 H2 separation in an ultramicroporous cadmium nitroprusside (Cd-NP) with compact pore space and complementary electrostatic potential well fitting for CO2 , thus enabling molecular quadrupole moment recognition of CO2 over C2 H2 . This material shows a high CO2 /C2 H2 uptake ratio of 6.0 as well as remarkable CO2 /C2 H2 selectivity of 85 under ambient conditions with modest CO2 heat of adsorption. Neutron powder diffraction experiments and molecular simulations revealed that the electrostatic potential compatibility between pore structure and CO2 allows it to be trapped in a head-on orientation towards the Cd center, whereas the diffusion of C2 H2 is electrostatically forbidden. Dynamic breakthrough experiments have validated the separation performance of this compound for CO2 /C2 H2 separation.

2-D spin crossover materials at the nanometric scale: the effects of the size-reduction on the magnetic properties

Spin Crossover (SCO) particles at the nanometric scale provide an alternative point of view and a new perspective concerning the development of a new generation of spintronic, electronic, photonic and mechanical devices. The coexistence of the SCO phenomenon with the accompanying hysteresis loop enhances the functionality of future devices for storing and processing information. Despite all promising facts, the SCO phenomena are greatly affected by cooperativity issues resulting in a direct relation between the decrease of the size of nanopatricle and the overall decrease of cooperativity towards more gradual spin transitions. This minireview aims to summarise the synthetic techniques for the synthesis of 2-D FeII SCO particles at the nanometric scale, an underexplored area of research, highlighting the effects of the size-reduction on the magnetic properties of the corresponding nanoparticles and hopefuly showcasing the importance of studying in the context of 2D limit the SCO phenomena.

Surface morphology-induced spin-crossover-inactive high-spin state in a coordination framework

Here we report a surface morphology-induced spin state control in ultrathin films of a spin-crossover (SCO) material. The surface microstructure of film domains exhibited selectivity, to stabilize the SCO-active high-spin (HS) or SCO-inactive high-spin (HS2) states. To date, the latter has only been confirmed in the bulk counterpart at gigapascal pressure.

Thermal hysteresis induced by external pressure in a 3D Hofmann-type SCO-MOF

Two 3D Hofmann-type compounds [Fe^II(dbdpe)M^II(CN)₄]·4H₂O have been synthesized. The application of pressure on compound 1 shifted the transition temperature from 185 K to 298 K and led to a hysteresis loop of 13–25 K.

Synthesis of Zn-based 1D and 2D coordination polymer nanoparticles in block copolymer micelles

Nanoparticles of the 1D and 2D coordination polymers [Zn(OAc)2(bipy)] n and [Zn(TFA)2(bppa)2] n were prepared, employing polystyrene-block-poly(4-vinylpyridine) diblock copolymers with different weight fractions of the 4-vinylpyridine (4VP) block and comparable overall molecular weights of M n ≈ 155 kg mol-1 as template (SV-15 and SV-42 with 15 and 42 wt% 4VP, respectively). [Zn(OAc)2(bipy)] n nanoparticles were successfully synthesised within the 4VP core of SV-42 micelles, showing a core size of D core = 47 ± 5 nm and a hydrodynamic diameter of D h = 157 ± 46 nm, determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS). The crystallinity of the composite is quite low, showing only low intensity reflexes in the powder X-ray diffraction (PXRD) pattern with the highest particle load. No indications for larger microcrystals were detected by scanning electron microscopy (SEM), proving the successful integration of the coordination polymer nanoparticles within the micellar cores. Nanocomposites of the 2D coordination network [Zn(TFA)2(bppa)2] n were synthesised using both diblock copolymers. The particle core sizes (from TEM) and hydrodynamic diameters (from DLS) correlate with the 4VP fraction of the micelles, resulting in D core = 46 ± 6 nm for SV-42 and 15 ± 2 nm for SV-15 and D h = 340 ± 153 nm and 177 ± 57 nm, respectively. The successful synthesis was proven by PXRD and SEM images, confirming the absence of larger crystallites. Hence, it is possible to synthesise nanocomposites of Zn-based 1D and 2D coordination polymers by a direct approach utilizing diblock copolymer micelles as template.

Reversible guest-induced gate-opening with multiplex spin crossover responses in two-dimensional Hofmann clathrates

Spin crossover (SCO) compounds are very attractive types of switchable materials due to their potential applications in memory devices, actuators or chemical sensors. Rational chemical tailoring of these switchable compounds is key for achieving new functionalities in synergy with the spin state change. However, the lack of precise structural information required to understand the chemical principles that control the SCO response with external stimuli may eventually hinder further development of spin switching-based applications. In this work, the functionalization with an amine group in the two-dimensional (2D) SCO compound {Fe(5-NH2Pym)2[MII(CN)4]} (1M, 5-NH2Pym = 5-aminopyrimidine, MII = Pt (1Pt), Pd (1Pd)) confers versatile host-guest chemistry and structural flexibility to the framework primarily driven by the generation of extensive H-bond interactions. Solvent free 1M species reversibly adsorb small protic molecules such as water, methanol or ethanol yielding the 1M·H2O, 1M·0.5MeOH or 1M·xEtOH (x = 0.25-0.40) solvated derivatives. Our results demonstrate that the reversible structural rearrangements accompanying these adsorption/desorption processes (1M ↔ 1M·guest) follow a gate-opening mechanism whose kinetics depend not only on the nature of the guest molecule and that of the host framework (1Pt or 1Pd) but also on their reciprocal interactions. In addition, a predictable and reversible guest-induced SCO modulation has been observed and accurately correlated with the associated crystallographic transformations monitored in detail by single crystal X-ray diffraction.

Epitaxial Thin-Film vs Single Crystal Growth of 2D Hofmann-Type Iron(II) Materials: A Comparative Assessment of their Bi-Stable Spin Crossover Properties

Integration of the ON-OFF cooperative spin crossover (SCO) properties of Fe^II coordination polymers as components of electronic and/or spintronic devices is currently an area of great interest for potential applications. This requires the selection and growth of thin films of the appropriate material onto selected substrates. In this context, two new series of cooperative SCO two-dimensional Fe^II coordination polymers of the Hofmann-type formulated {Fe^II(Pym)₂[M^II(CN)₄]·xH₂O}_n and {Fe^II(Isoq)₂[M^II(CN)₄]}_n (Pym = pyrimidine, Isoq = isoquinoline; M^II = Ni, Pd, Pt) have been synthesized, characterized, and the corresponding Pt derivatives selected for fabrication of thin films by liquid-phase epitaxy (LPE). At ambient pressure, variable-temperature single-crystal X-ray diffraction, magnetic, and calorimetric studies of the Pt and Pd microcrystalline materials of both series display strong cooperative thermal induced SCO properties. In contrast, this property is only observed for higher pressures in the Ni derivatives. The SCO behavior of the {Fe^II(L)₂[Pt^II(CN)₄]}_n thin films (L = Pym, Isoq) were monitored by magnetization measurements in a SQUID magnetometer and compared with the homologous samples of the previously reported isostructural {Fe^II(Py)₂[Pt^II(CN)₄]}_n (Py = pyridine). Application of the theory of regular solutions to the SCO of the three derivatives allowed us to evaluate the effect on the characteristic SCO temperatures and the hysteresis, as well as the associated thermodynamic parameters when moving from microcrystalline bulk solids to nanometric thin films.

Confined Crystallization of Spin-Crossover Nanoparticles in Block-Copolymer Micelles

Nanoparticles of the spin-crossover coordination polymer [FeL(bipy)]n were synthesized by confined crystallization within the core of polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) diblock copolymer micelles. The 4VP units in the micellar core act as coordination sites for the Fe complex. In the bulk material, the spin-crossover nanoparticles in the core are well isolated from each other allowing thermal treatment without disintegration of their structure. During annealing above the glass transition temperature of the PS block, the transition temperature is shifted gradually to higher temperatures from the as-synthesized product (T1/2 ↓=163 K and T1/2 ↑=170 K) to the annealed product (T1/2 ↓=203 K and T1/2 ↑=217 K) along with an increase in hysteresis width from 6 K to 14 K. Thus, the spin-crossover properties can be shifted towards the properties of the related bulk material. The stability of the nanocomposite allows further processing, such as electrospinning from solution.

Mixed Metal-Organic Framework with Multiple Binding Sites for Efficient C2 H2 /CO2 Separation

The separation of C2 H2 /CO2 is particularly challenging owing to their similarities in physical properties and molecular sizes. Reported here is a mixed metal-organic framework (M'MOF), [Fe(pyz)Ni(CN)4 ] (FeNi-M'MOF, pyz=pyrazine), with multiple functional sites and compact one-dimensional channels of about 4.0 Å for C2 H2 /CO2 separation. This MOF shows not only a remarkable volumetric C2 H2 uptake of 133 cm3  cm-3 , but also an excellent C2 H2 /CO2 selectivity of 24 under ambient conditions, resulting in the second highest C2 H2 -capture amount of 4.54 mol L-1 , thus outperforming most previous benchmark materials. The separation performance of this material is driven by π-π stacking and multiple intermolecular interactions between C2 H2 molecules and the binding sites of FeNi-M'MOF. This material can be facilely synthesized at room temperature and is water stable, highlighting FeNi-M'MOF as a promising material for C2 H2 /CO2 separation.

Physical stimulus and chemical modulations of bistable molecular magnetic materials

In this Feature Article, we summarize the recent progress made in modulating the multifaceted magnetic behaviour of single-molecule magnets (SMMs) and spin-crossover (SCO) materials based on chemical modifications and external stimuli.

Temperature-dependent hysteretic two-step spin crossover in two-dimensional Hofmann-type compounds

Two 2D Hofmann-type compounds [Fe^II(ppe)₂M^II(CN)₄]·3H₂O [ppe = 1-(2-pyridyl)-2-(4-pyridyl)ethylene; M = Pd for 1 and Pt for 2] have been synthesized. Both of them show complete two-step hysteretic SCO transitions HS^1.0 ⇌ HS^0.6–0.5LS^0.4–0.5 ⇌ LS^1.0.

2D-Coordination polymers based on 1H-indazole-4-carboxylic acid and transition metal ions: magnetic, luminescence and biological properties

Five novel multifunctional coordination polymers (CPs) based on 1H-indazole-4-carboxylic acid are reported. These complexes, the first examples of CPs with this novel ligand, show interesting magnetic, luminescence and biological properties.

Effect of nanostructuration on the spin crossover transition in crystalline ultrathin films

Mastering the nanostructuration of molecular materials onto solid surfaces and understanding how this process affects their properties are of utmost importance for their integration into solid-state electronic devices. This is even more important for spin crossover (SCO) systems, in which the spin transition is extremely sensitive to size reduction effects. These bi-stable materials have great potential for the development of nanotechnological applications provided their intrinsic properties can be successfully implemented in nanometric films, amenable to the fabrication of functional nanodevices. Here we report the fabrication of crystalline ultrathin films (<1-43 nm) of two-dimensional Hofmann-type coordination polymers by using an improved layer-by-layer strategy and a close examination of their SCO properties at the nanoscale. X-ray absorption spectroscopy data in combination with extensive atomic force microscopy analysis reveal critical dependence of the SCO transition on the number of layers and the microstructure of the films. This originates from the formation of segregated nanocrystals in early stages of the growth process that coalesce into a continuous film with an increasing number of growth cycles for an overall behaviour reminiscent of the bulk. As a result, the completeness of the high spin/low spin transition is dramatically hindered for films of less than 15 layers revealing serious limitations to the ultimate thickness that might be representative of the performance of the bulk when processing SCO materials as ultrathin films. This unprecedented exploration of the particularities of the growth of SCO thin films at the nanoscale should encourage researchers to put a spotlight on these issues when contemplating their integration into devices.

Hofmann Metal-Organic Framework Monolayer Nanosheets as an Axial Coordination Platform for Biosensing

Two-dimensional (2D) nanomaterials are remarkably attractive platform candidates for signal transduction through fluorescence resonance energy transfer or photo-induced electron-transfer pathway. In this work, a 2D Hofmann metal organic framework (hMOF) monolayer nanosheet was developed as an axial coordination platform for DNA detection via a ligand-to-metal charge-transfer quenching mechanism. Through modulating the position of phosphonate groups of rigid ligands, a layer-structured hMOF was synthesized. The single crystals showed that the adjacent layers were linked via hydrogen bonds between diethyl 4-pyridylphosphonate and the solvent. Furthermore, the 2D hMOF monolayer nanosheets were obtained easily via a top-down method. More significantly, the quenching mechanism was identified as an axial coordination between the open Fe²⁺ sites of hMOF nanosheets and fluorophores with 91% quenching efficiency, constituting an excellent signal transduction strategy. The smart use of hMOF monolayer nanosheets as an axial coordination platform could lead to promising applications in signal switching or/and sensing devices.

Enantioselective separation under humid conditions by chiral Hofmann clathrates: new opportunities for vintage materials

Chiral Hofmann clathrates for enantioselective adsorption/separation.