Identification and removal of micro- and nano-plastics: Efficient and cost-effective methods

Copper-based photocatalysts with natural organic ligands for efficient removal of tetracycline under visible light

The excessive use of broad-spectrum antibiotics, such as tetracycline, presents a significant challenge to human survival and development. Oxygen vacancies (OVs) metal-organic framework (MOF) materials were synthesized using natural organic acids (L-malic acid, L-aspartic acid, and L-asparagine) with similar structures but different charge densities, along with copper as the metal linking agent. The presence of oxygen vacancies in the catalyst provides abundant active sites for photocatalytic reactions. The employment of flexible straight-chain organic ligands devoid of rigid polycyclic rings, combined with the incorporation of different substituents to induce variations in charge density, the resulting catalysts exhibit distinct photocatalytic activities under visible light. Density functional theory calculations confirm that L-asparagine exhibits the largest electron density difference, and the Cu-based MOF (Cu-ASU) synthesized as an organic ligand exhibits the highest photocatalytic activity under visible light excitation. The catalyst displayed remarkable photocatalytic activity against tetracycline antibiotics under identical conditions (with removal rates of 93.5 % for tetracycline, 81.4 % for terramycin, and 95.6 % for chloramphenicol hydrochloride). This provides a novel approach for the design and synthesis of photocatalysts for the removal of antibiotics from water.

A multi-analytical approach to evaluate the removal efficiency of polystyrene nanoparticles in water treatment processes

The removal of nanoplastics (NP) from water using various treatment processes has gained significant attention recently. This study comprehensively characterizes the degradation of polystyrene nanoparticles (concentration: 200 ppm, diameter: 140 nm) through UVC irradiation. For the first time, we compared four analytical methods to monitor removal efficiency: Py-GCMS, UV-Visible spectroscopy, TOC, and Turbidity. Additionally, DLS, TEM, and SEC were used to understand changes in particle size, morphology, and molecular weight. Results showed that Py-GCMS overestimated the removal rate by a factor of 2 compared to Turbidity and UV-Visible measurements, which were in agreement. Furthermore, after 200 h of irradiation, the styrene signal disappears from the pyrogram, although the mineralization rate reaches only 50%, as determined by total organic carbon (TOC) analysis. The particle size decreased slowly, reaching 100 nm after 150 h, while a significant decrease in molecular weight indicated high chain-scission. These findings emphasize the importance of a multi-analytical approach to accurately assess NP removal efficiency and understand degradation mechanisms.

Microplastics and nanoplastics in soil: Sources, impacts, and solutions for soil health and environmental sustainability

The present review discusses the growing concern of microplastics (MPs) and nanoplastics (NPs) in soil, together with their sources, concentration, distribution, and impact on soil microorganisms, human health, and ecosystems. MPs and NPs can enter the soil through various pathways, such as agricultural activities, sewage sludge application, and atmospheric deposition. Once in the soil, they can accumulate in the upper layers and affect soil structure, water retention, and nutrient availability. The presence of MPs and NPs in soil can also have ecological consequences, acting as carriers for pollutants and contaminants, such as heavy metals and persistent organic pollutants. Additionally, the leaching of chemicals and additives from MPs and NPs can pose public health risks through the food web and groundwater contamination. The detection and analyses of MPs and NPs in soil can be challenging, and methods involve spectroscopic and microscopy techniques, such as Fourier-transform infrared spectroscopy and scanning electron microscopy. To mitigate the presence and effects of MPs and NPs in soil, it is essential to reduce plastic waste production, improve waste management practices, and adopt sustainable agricultural practices. Effective mitigation measures include implementing stricter regulations on plastic use, promoting biodegradable alternatives, and enhancing recycling infrastructure. Additionally, soil amendments, such as biochar and compost, can help immobilize MPs and NPs, reducing their mobility and bioavailability. This review article aims to provide a comprehensive understanding of these emerging environmental issues and identify potential solutions to alleviate their impact on soil health, ecosystem functioning, and community health.

Differences of microplastics and nanoplastics in urban waters: Environmental behaviors, hazards, and removal

Microplastics (MPs) and nanoplastics (NPs) are ubiquitous in the aquatic environment and have caused widespread concerns globally due to their potential hazards to humans. Especially, NPs have smaller sizes and higher penetrability, and therefore can penetrate the human barrier more easily and may pose potentially higher risks than MPs. Currently, most reviews have overlooked the differences between MPs and NPs and conflated them in the discussions. This review compared the differences in physicochemical properties and environmental behaviors of MPs and NPs. Commonly used techniques for removing MPs and NPs currently employed by wastewater treatment plants and drinking water treatment plants were summarized, and their weaknesses were analyzed. We further comprehensively reviewed the latest technological advances (e.g., emerging coagulants, new filters, novel membrane materials, photocatalysis, Fenton, ozone, and persulfate oxidation) for the separation and degradation of MPs and NPs. Microplastics are more easily removed than NPs through separation processes, while NPs are more easily degraded than MPs through advanced oxidation processes. The operational parameters, efficiency, and potential governing mechanisms of various technologies as well as their advantages and disadvantages were also analyzed in detail. Appropriate technology should be selected based on environmental conditions and plastic size and type. Finally, current challenges and prospects in the detection, toxicity assessment, and removal of MPs and NPs were proposed. This review intends to clarify the differences between MPs and NPs and provide guidance for removing MPs and NPs from urban water systems.

Microplastics encapsulation in aragonite: efficiency, detection and insight into potential environmental impacts

Plastic pollution in aquatic ecosystems has become a significant problem especially microplastics which can encapsulate into the skeletons of organisms that produce calcium carbonates, such as foraminifera, molluscs and corals. The encapsulation of microplastics into precipitated aragonite, which in nature builds the coral skeleton, has not yet been studied. It is also not known how the dissolved organic matter, to which microplastics are constantly exposed in aquatic ecosystems, affects the encapsulation of microplastics into aragonite and how such microplastics affect the mechanical properties of aragonite. We performed aragonite precipitation experiments in artificial seawater in the presence of polystyrene (PS) and polyethylene (PE) microspheres, untreated and treated with humic acid (HA). The results showed that the efficiency of encapsulating PE and PE-HA microspheres in aragonite was higher than that for PS and PS-HA microspheres. The mechanical properties of resulting aragonite changed after the encapsulation of microplastic particles. A decrease in the hardness and indentation modulus of the aragonite samples was observed, and the most substantial effect occurred in the case of PE-HA microspheres encapsulation. These findings raise concerns about possible changes in the mechanical properties of the exoskeleton and endoskeleton of calcifying marine organisms such as corals and molluscs due to the incorporation of pristine microplastics and microplastics exposed to dissolved organic matter.

Harnessing Magnetic Nanoparticles for the Effective Removal of Micro- and Nanoplastics: A Critical Review

The spread of micro- (MPs) and nanoplastics (NPs) in the environment has become a significant environmental concern, necessitating effective removal strategies. In this comprehensive scientific review, we examine the use of magnetic nanoparticles (MNPs) as a promising technology for the removal of MPs and NPs from water. We first describe the issues of MPs and NPs and their impact on the environment and human health. Then, the fundamental principles of using MNPs for the removal of these pollutants will be presented, emphasizing that MNPs enable the selective binding and separation of MPs and NPs from water sources. Furthermore, we provide a short summary of various types of MNPs that have proven effective in the removal of MPs and NPs. These include ferromagnetic nanoparticles and MNPs coated with organic polymers, as well as nanocomposites and magnetic nanostructures. We also review their properties, such as magnetic saturation, size, shape, surface functionalization, and stability, and their influence on removal efficiency. Next, we describe different methods of utilizing MNPs for the removal of MPs and NPs. We discuss their advantages, limitations, and potential for further development in detail. In the final part of the review, we provide an overview of the existing studies and results demonstrating the effectiveness of using MNPs for the removal of MPs and NPs from water. We also address the challenges that need to be overcome, such as nanoparticle optimization, process scalability, and the removal and recycling of nanoparticles after the completion of the process. This comprehensive scientific review offers extensive insights into the use of MNPs for the removal of MPs and NPs from water. With improved understanding and the development of advanced materials and methods, this technology can play a crucial role in addressing the issues of MPs and NPs and preserving a clean and healthy environment. The novelty of this review article is the emphasis on MNPs for the removal of MPs and NPs from water and a detailed review of the advantages and disadvantages of various MNPs for the mentioned application. Additionally, a review of a large number of publications in this field is provided.

Transition metals-doped g-C3N4 nanostructures as advanced photocatalysts for energy and environmental applications

Graphitic carbon nitride (g-C3N4)-based heterostructured photocatalysts have received significant attention for its potential applications in the treatment of wastewater and hydrogen evolution. The utilization of semiconductor materials in heterogeneous photocatalysis has recently received great attention due to their potential and eco-friendly properties. Doping with metal ions plays a crucial role in altering the photochemical characteristics of g-C3N4, effectively enhancing photoabsorption into the visible range and thus improving the photocatalytic performance of doped photocatalysts. As an emerging nanomaterial, nanostructured g-C3N4 represents a visible light-active semiconducting photocatalyst that has attracted significant interest in the photocatalysis field, particularly for its practical water treatment applications. To the best of our knowledge, investigations of functionalized photocatalytic (PC) materials on 3d transition metal-doped g-C3N4 remain unexplored in the existing literature. g-C3N4 based heterohybrid photocatalysts have demonstrated excellent reusability, making them highly promising for wastewater treatment applications. This paper describes the overview of numerous studies conducted on the heterostructured g-C3N4 photocatalysts with various 3d metals. Research studies have revealed that the introduction of element doping with various 3d transition metals (e.g., Ti, Mn, Fe, Co, Ni, Cu, Zn, etc.) into g-C3N4 is an efficient approach to enhance degradation efficacy and boost photocatalytic activity (PCA) of doped g-C3N4 catalysts. Moreover, the significance of g-C3N4 heterostructured nanohybrids is highlighted, particularly in the context of wastewater treatment applications. The study concludes by providing insights into future perspectives in this developing area of research, with a specific focus on the degradation of various organic contaminants.

Indoor microplastics: a comprehensive review and bibliometric analysis

Indoor microplastic (MP) pollution is becoming a worldwide issue because people spend more time inside. Through dust and air, indoor MP pollution may harm human health. This review summarizes recent advancements in indoor MP research, covering pretreatments, quality control, filter membranes, and identification methods. Additionally, it conducts bibliometric analysis to examine the usage of keywords, publication records, and authors' contributions to the field. Comparatively, dust and deposition samples exhibit higher MP concentrations than indoor air samples. Fiber-shaped MPs are commonly detected indoors. The color and types of MPs display variability, with polypropylene, polyethylene, polyethylene terephthalate, and polystyrene identified as the dominant MPs. Indoor environments generally demonstrate higher concentrations of MPs than outdoor environments, and MPs in the lower size range (1-100 µm) are typically more abundant. Among the reviewed articles, 45.24% conducted pretreatment on their samples, while 16.67% did not undergo any pretreatment. The predominant filter utilized in most studies was the Whatman Glass microfiber filter (41.67%), and MPs were predominantly characterized using µ-FTIR (19.23%). In the literature, 17 papers used blank samples, and eight did not. Blank findings were not included in most research (23 articles). A significant increase in published articles has been observed since 2020, with an annual growth rate exceeding 10%. The keyword microplastics had the highest frequency, followed by fibers. This indoor MP study emphasizes the need for collaborative research, policymaking, and stakeholder involvement to reduce indoor MP pollution. As indoor MP research grows, so are opportunities to identify and minimize environmental and health impacts.

Microplastics and biobased polymers to combat plastics waste

Microplastics (MPs) have become the major global concern due to their adverse effects on the environment, human health, and hygiene. These complex molecules have numerous toxic impacts on human well-being. This review focuses on the methods for chemically quantifying and identifying MPs in real-time samples, as well as the detrimental effects resulting from exposure to them. Biopolymers offer promising solutions for reducing the environmental impact caused by persistent plastic pollution. The review also examines the significant progress achieved in the preparation and modification of various biobased polymers, including polylactic acid (PLA), poly(ε-caprolactone) (PCL), lignin-based polymers, poly-3-hydroxybutyrate (PHB), and poly(hydroxyalkanoates) (PHA), which hold promise for addressing the challenges associated with unplanned plastic waste disposal.

Hydrophobicity-driven self-assembly of nanoplastics and silver nanoparticles for the detection of polystyrene microspheres using surface enhanced Raman spectroscopy

Microplastics (MPs) and Nanoplastics (NPs) accumulated in the environment have been identified as a major global issue due to their potential harm to wildlife. Current research in the detection of MPs is well established. However, the detection of NPs remains challenging. The aim of this paper is to investigate the detection of polystyrene (PS) NPs on a super-hydrophobic substrate using surface-enhanced Raman spectroscopy (SERS) technology after high-speed centrifugation of PS NPs and AgNPs. The hydrophobic substrate reduces the contact area of droplet, concentrating PS NPs and AgNPs on a small spot, which eliminates the random distribution of nano particles. The condensed PS NPs and AgNPs improve the SERS intensity, reproductivity and detection sensitivity. The results show that SERS measurement on a hydrophobic substrate could significantly improve the detection sensitivity of PS NPs, with the detection limits of PS NPs as low as 0.5 mg/L (500 nm PS NPs) and 1 mg/L (100 nm PS NPs). The study provides an effective and rapid method for the detection of NPs at trace concentration, demonstrating more possibility for the future detection of trace NPs in the aquatic environment.

Separation and flow cytometry analysis of microplastics and nanoplastics

In recent years, the utilization of flow cytometry for quantitative microplastic analysis has gained prominence. However, the current methods have some drawbacks that need to be improved. The present study aims to enhance the flow cytometry detection protocols for Nile red (NR) stained microplastics, facilitating distinct microplastic and nanoplastic enumeration. By elevating dimethyl sulfoxide (DMSO) concentration to 20%-30% within the solution, NR solubility improved and agglomeration reduced. The analysis of 26 replicates of polystyrene (PS) liquid samples through four distinct dot plots highlighted the superior accuracy of dot plots integrating yellow fluorescence. Through systematic staining of varying NR concentrations across three microplastic liquid samples (polyethylene terephthalate, polyethylene, and polypropylene), the optimal staining concentration was determined to be 15-20 μg/mL. The distributions of agglomerated NR and NR stained PS under two scenarios-dissolved NR and partially agglomerated NR-were compared. Results showed their distinct distributions within the side scatter versus yellow fluorescence dot plot. Counting results from gradient-diluted PS liquid samples revealed a microplastic detection lower limit of 104 particles/mL, with an optimal concentration range of 105-106 particles/mL. Flow cytometric assessment of PS microspheres spanning 150 nm to 40 μm indicated a 150 nm particle size detection minimum. Our investigation validated the efficacy of NR staining and subsequent flow cytometry analysis across eleven types of microplastics. Separation and concentration of microplastics (1.0-50.0 μm) and nanoplastics (0.2-1.0 μm) were achieved via sequential sieving through 50, 1.0, and 0.2 μm filter membranes. We used a combination of multiple filtration steps and flow cytometry to analyze microplastics and nanoplastics in nine simulated water samples. Our results showed that the combined amount of microplastics (1.0-50.0 μm) and nanoplastics (0.2-1.0 μm) after filtration had a ratio of 0.80-1.19 compared to the total microplastic concentration before filtration. This result confirms the practicality of our approach. By enhancing flow cytometry-based microplastic and nanoplastic detection protocols, our study provides pivotal technical support for research concerning quantitative toxicity assessment of microplastic and nanoplastic pollution.

Insights into Anthropogenic Micro- and Nanoplastic Accumulation in Drinking Water Sources and Their Potential Effects on Human Health

Anthropogenic microplastics (MPs) and nanoplastics (NPs) are ubiquitous pollutants found in aquatic, food, soil and air environments. Recently, drinking water for human consumption has been considered a significant pathway for ingestion of such plastic pollutants. Most of the analytical methods developed for detection and identification of MPs have been established for particles with sizes > 10 μm, but new analytical approaches are required to identify NPs below 1 μm. This review aims to evaluate the most recent information on the release of MPs and NPs in water sources intended for human consumption, specifically tap water and commercial bottled water. The potential effects on human health of dermal exposure, inhalation, and ingestion of these particles were examined. Emerging technologies used to remove MPs and/or NPs from drinking water sources and their advantages and limitations were also assessed. The main findings showed that the MPs with sizes > 10 μm were completely removed from drinking water treatment plants (DWTPs). The smallest NP identified using pyrolysis-gas chromatography-mass spectrometry (Pyr-GC/MS) had a diameter of 58 nm. Contamination with MPs/NPs can occur during the distribution of tap water to consumers, as well as when opening and closing screw caps of bottled water or when using recycled plastic or glass bottles for drinking water. In conclusion, this comprehensive study emphasizes the importance of a unified approach to detect MPs and NPs in drinking water, as well as raising the awareness of regulators, policymakers and the public about the impact of these pollutants, which pose a human health risk.

Raman spectra characterization of size-dependent aggregation and dispersion of polystyrene particles in aquatic environments

Aqueous environments are generally thought to be a source of pooling and re-distribution for both micro-plastics (MPs) and nano-plastics (NPs); however, significantly less data on NPs than MPs have been reported. The occurrence of salts, proteins, and other organic matter may promote or inhibit the aggregation of NPs to form agglomeration particles, making their detection more difficult. In this study, 80 and 500 nm polystyrene nano-plastics (PS-NPs) modified by four different functional groups (PS-Bare, PS-COOH, PS-NH₂, and PS-CHO-500 nm) were selected to mimic the flocculation and/or sedimentation of NPs in salts (NaCl, CaCl₂, and Na₂SO₄) and protein solutions. The results showed that the 80 nm PS-NPs are only colloidal in pure water. All four strong electrolyte solutions that were tested significantly promoted the aggregation of PS-NPs, including those that were protein-coated. In addition, 500 nm PS-CHO did not flocculate but gradually settled into sedimentation. Therefore, Raman spectrometry can be used to analyze assembled PS-NPs, but is not suitable for analyzing normal PS-NPs. By combining fractal morphology, this study provides insight into the comprehensive analysis of PS-NPs in water solutions, including the digestion of biological samples.

Sources, distribution, and incipient threats of polymeric microplastic released from food storage plastic materials

The present study aimed to find out the source, distribution, quantity, and incipient threats of the microplastics (MPs) released by food-packing plastic materials, plastic bags, bottles, and containers on human health, biodiversity, water bodies, and atmosphere. For this purpose, 152 articles about MPs (0.1 to 5000 µm) and nanoplastics (NP) 1 to 100 nm) were reviewed and interpreted their results in the present articles about microplastics. The highest plastic waste is generated by China (⁓ 59 Mt), the USA (⁓ 38 Mt), Brazil (⁓ 12 Mt), Germany (⁓ 15 Mt), and Pakistan (⁓ 6 Mt). The count of MPs (MPs/kg) in Chinese salt was 718, UK 136, Iran 48, and USA 32, while MPs in bivalves, i.e., in Chinese bivalves was 2.93, UK 2.9, Iran 2.2, and Italy 7.2 in MPs/kg, respectively. The MPs count in Chinese fish was 7.3, Italy's 23, the USA's 13, and UK's 1.25 in MPs/kg, respectively. The MP concentrations in the water bodies, i.e., USA, were 15.2, Italy 7, and UK 4.4 in mg/L, respectively. It was critically reviewed that MPs can enter the human body causing various disorders (neurotoxic, biotoxic, mutagenic, teratogenic, and carcinogenic disorders) because of the presence of various polymers. The present study concluded that MPs were released from processed and stored food containers, either through physical, biological, or chemical means, which harshly affect the surrounding environment and human health. The study recommended that alternatives to plastic containers are glass and bioplastic containers, papers, cotton bags, wooden boxes, and tree leaves need to use to avoid direct consumption of MPs from food.

Abundance and characteristics of microplastics in drinking water treatment plants, distribution systems, water from refill kiosks, tap waters and bottled waters

Limited research studies have revealed the presence of microplastics (MPs) of different polymer types, shapes, and sizes in drinking water sources, influents of drinking water treatment plants (DWTPs), effluents of DWTPs, tap water, and bottled water. Reviewing the available information on MP pollution in waters, which is becoming more worrying in correlation with the increasing plastic production in the world every year, is noteworthy for understanding the current situation, identifying the deficiencies in the studies, and taking the necessary measures for public health as soon as possible. Therefore, this paper, in which the abundance, characteristics, and removal efficiencies of MPs in the processes from raw water to tap water and/or bottled water are reviewed is a guide for dealing with MP pollution in drinking water. In this paper, firstly, the sources of MPs in raw waters are briefly reviewed. In addition, the abundance, and characteristics (polymer type, shape, and size) of MPs in influents and effluents of DWTPs in different countries are reviewed and the effects of treatment stages (coagulation, flocculation, sedimentation, sand filtration, disinfection, and membrane filtration) of DWTPs on MP removal efficiency and the factors that are effective in removal are discussed. Moreover, studies on the factors affecting MP release from drinking water distribution systems (DWDSs) to treated water and the abundance and characteristics of MPs in tap water, bottled water and water from refill kiosks are reviewed. Finally, the deficiencies in the studies dealing with MPs in drinking water were identified and recommendations for future studies are presented.

Characterization Techniques of Polymer Aging: From Beginning to End

Polymers have been widely applied in various fields in the daily routines and the manufacturing. Despite the awareness of the aggressive and inevitable aging for the polymers, it still remains a challenge to choose an appropriate characterization strategy for evaluating the aging behaviors. The difficulties lie in the fact that the polymer features from the different aging stages require different characterization methods. In this review, we present an overview of the characterization strategies preferable for the initial, accelerated, and late stages during polymer aging. The optimum strategies have been discussed to characterize the generation of radicals, variation of functional groups, substantial chain scission, formation of low-molecular products, and deterioration in the polymers' macro-performances. In view of the advantages and the limitations of these characterization techniques, their utilization in a strategic approach is considered. In addition, we highlight the structure-property relationship for the aged polymers and provide available guidance for lifetime prediction. This review could allow the readers to be knowledgeable of the features for the polymers in the different aging stages and provide access to choose the optimum characterization techniques. We believe that this review will attract the communities dedicated to materials science and chemistry.

Plastic waste management for sustainable environment: techniques and approaches

Excessive exploitation, negligence, non-degradable nature, and physical and chemical properties of plastic waste have resulted in a massive pollution load into the environment. Consequently, plastic entres the food chain and can cause serious health issues in aquatic animals and humans. The present review summarizes currently reported techniques and approaches for the removal of plastic waste. Many techniques, such as adsorption, coagulation, photocatalysis, and microbial degradation, and approaches like reduction, reuse and recycling are potentially in trend and differ from each other in their efficiency and interaction mechanism. Moreover, substantial advantages and challenges associated with these techniques and approaches are highlighted to develop an understanding of the selection of possible ways for a sustainable future. Nevertheless, in addition to the reduction of plastic waste from the ecosystem, many alternative opportunities have also been explored to cash plastic waste. These fields include the synthesis of adsorbents for the removal of pollutants from aqueous and gaseous stream, their utility in clothing, waste to energy and fuel and in construction (road making). Substantial evidence can be observed in the reduction of plastic pollution from various ecosystems. In addition, it is important to develop an understanding of factors that need to be emphasized while considering alternative approaches and opportunities to cash plastic waste (like adsorbent, clothing, waste to energy and fuel). The thrust of this review is to provide readers with a comprehensive overview of the development status of techniques and approaches to overcome the global issue of plastic pollution and the outlook on the exploitation of this waste as resources.

Multi-Analytical Approach to Characterize the Degradation of Different Types of Microplastics: Identification and Quantification of Released Organic Compounds

Microplastics and nanoplastics represent one of the major environmental issues nowadays due to their ubiquitous presence on Earth, and their high potential danger for living systems, ecosystems, and human life. The formation of both microplastics and nanoplastics strongly depends on both the type of pristine materials and the degradation processes related to biological and/or abiotic conditions. The aim of this study is to investigate the effect of two of the most relevant abiotic parameters, namely temperature and light, taken under direct control by using a Solar box, on five types of reference polymers: high density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP), polystyrene (PS), and polyethylene terephthalate (PET). A multi-analytical approach was adopted to investigate in detail the first steps of plastics degradation. Samples of plastic materials at different degradation times were analyzed by means of ¹H NMR spectroscopy and thermal desorption gas chromatography mass spectrometry (TD-GC-MS) technique. Several minor molecular species released during degradation were consistently identified by both techniques thus providing a comprehensive view of the various degradation products of these five types of microplastics.

Adsorptive behavior of micro(nano)plastics through biochar: Co-existence, consequences, and challenges in contaminated ecosystems

The abundance of micro(nano)plastics in natural ecosystems is a crucial global challenge, as these small-sized plastic particles originate from land-based and marine-based activities and are widely present in marine, freshwater, and terrestrial ecosystems. Micro(nano)plastics can significantly be reduced through various methods, such as biological, chemical, and physical techniques. Biochar is a low-cost adsorbent and is considered an efficient material and its application is ecologically effective carbon-negative for remediation of organic and inorganic pollutants. Therefore, this review critically discusses the fate and transport of micro(nano)plastics and their interactions with different biochar in aqueous and column porous media. This review outlines the implications of biochar with the co-existence of micro(nano)plastics in efforts to understand their coupled effects on soil physicochemical properties, microbial communities, and plant growth, along with the removal of heavy metals and other toxic contaminants. In batch experiments, biochar synthesized from various biomasses such as corn straw, hardwood, pine and spruce bark, corncob, and Prosopis juliflora had shown high level of removal efficiency (>90 %) for microplastic adsorption under varying environmental conditions viz., pH, temperature, ionic strength, particle size, and dose due to chemical bonding and electrostatic attractions. Increased temperature of the aqueous solutions encouraged higher adsorption, while higher pH and dissolved organic matter and nutrients may show decreased adsorption capacities for micro(nano)plastics using biochar. Compared to other available physical, chemical, and biological methods, biochar-amended sand filters in column experiments have been very efficient in removing micro(nano)plastics. In saturated column porous media, various microplastics could be inhibited using biochar due to decreased electrostatic repulsion, steric hindrance, and competitive sorption due to humic acid, ionic strength, and cations. Finally, this review provides in-depth insights on further investigations and recommendations for overall micro(nano)plastics removal using biochar-based materials.

Pyrolysis Process of Mixed Microplastics Using TG-FTIR and TED-GC-MS

Microplastics have become a ubiquitous contaminant in the environment. The present study focuses on the identification, characterization, and quantification techniques for tracking microplastics. Due to their unique compositional structure, unambiguous identification of individual polymers in various plastic samples, usually comprised of mixtures of individual polymers, remains a challenge. Therefore, there is limited research on the pyrolysis characterization of mixed samples. In this study, two analytical methods, TG-FTIR and TED-GC-MS combined with thermogravimetric analysis were used to evaluate the thermal-degradation process of individual and mixed samples of polypropylene (PP), polyethylene terephthalate (PET), and polyvinyl chloride (PVC). The primary interaction was the volatilization of terephthalic acid bound to chlorine molecules. The reduction of vinyl-ester functional groups and aromatic hydrocarbon intermediates related to olefin branching was confirmed. Char formation was increased, due to aromatic compounds from PET and PVC. All of the polymers used in the study may be underestimated in quantity, due to combined volatilizations during pyrolysis. TG-FTIR and TED-GC-MS showed forceful advantages in identifying mixed microplastics through different discrimination mechanisms. The study provides deep insight into pyrolysis behaviors and the interactions of mixed polymers, and the obtained results can help better comprehend the complex pyrolysis process.

Removing microplastics from aquatic environments: A critical review

As one of the typical emerging contaminants, microplastics exist widely in the environment because of their small size and recalcitrance, which has caused various ecological problems. This paper summarizes current adsorption and removal technologies of microplastics in typical aquatic environments, including natural freshwater, marine, drinking water treatment plants (DWTPs), and wastewater treatment plants (WWTPs), and includes abiotic and biotic degradation technologies as one of the removal technologies. Recently, numerous studies have shown that enrichment technologies have been widely used to remove microplastics in natural freshwater environments, DWTPs, and WWTPs. Efficient removal of microplastics via WWTPs is critical to reduce the release to the natural environment as a key connection point to prevent the transfer of microplastics from society to natural water systems. Photocatalytic technology has outstanding pre-degradation effects on microplastics, and the isolated microbial strains or enriched communities can degrade up to 50% or more of pre-processed microplastics. Thus, more research focusing on microplastic degradation could be carried out by combining physical and chemical pretreatment with subsequent microbial biodegradation. In addition, the current recovery technologies of microplastics are introduced in this review. This is incredibly challenging because of the small size and dispersibility of microplastics, and the related technologies still need further development. This paper will provide theoretical support and advice for preventing and controlling the ecological risks mediated by microplastics in the aquatic environment and share recommendations for future research on the removal and recovery of microplastics in various aquatic environments, including natural aquatic environments, DWTPs, and WWTPs.

Removal and toxic forecast of microplastics treated by electrocoagulation: Influence of dissolved organic matter

In recent years, the break of COVID-19 makes the large use of disposable products, which causes the removal of microplastics become an imperative problem. Electrocoagulation is one of the effective removal technologies, but there is hardly research concentrating on the effect of substrate in the actual water on the microplastics removal with electrocoagulation. As an important role of water bodies, dissolved organic matter (DOM) has a vital and inevitable effect on the efficiency of electrocoagulation. In this study, the effect of DOM in tailwater on microplastics during electrocoagulation is elucidated by comparing the electrocoagulation treatment results between simulated wastewater and tailwater, using parallel factor analysis (PARAFAC), Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectrometer (FTIR) and zeta potential analyzer. Three kinds of microplastic particles (i.e. polypropylene, polyethylene, and polymethyl methacrylate) were added into each of the two kinds of wastewaters to form six electrocoagulation systems. Results show that DOM in tailwater promotes the production of flocs and free radicals during electrocoagulation process. Fe²⁺ and Fe³⁺ are adsorbed on the surface of DOM molecules and combined with •OH form flocs. Although DOM accelerates the production of free radicals and thus promotes the aging of microplastics, flocs with DOM as crystal nucleus can prevent toxic substances and small-sized microplastics from leaching into water again. Therefore, electrocoagulation is preferred to removal microplastics in water with high concentration of DOM. This study provides a significant reference for microplastics removal by electrocoagulation in actual water, and promote the practical application of electrocoagulation for microplastics removal in water treatment.

Nanoplastics: Detection and impacts in aquatic environments - A review

The rise in the global production of plastics has led to severe concerns about the impacts of plastics in aquatic environments. Although plastic materials degrade over extreme long periods, they can be broken down through physical, chemical, and/or biological processes to form microplastics (MPs), defined here as particles between 1 μm and 5 mm in size, and later to form nanoplastics (NPls), defined as particles <1 μm in size. We know little about the abundance and effects of NPls, even though a lot of research has been conducted on the ecotoxicological impacts of MPs on both aquatic biota. Nevertheless, there is evidence that NPls can both bypass the cell membranes of microorganisms and bioaccumulate in the tissues and organs of higher organisms. This review analyzes 150 publications collected by searching through the databases Web of Science, SCOPUS, and Google Scholar using keywords such as nanoplastics*, aquatic*, detection*, toxic*, biofilm*, formation*, and extracellular polymeric substance* as singular or plural combinations. We highlight and critically synthesize current studies on the formation and degradation of NPls, NPls' interactions with aquatic biota and biofilm communities, and methods of detection. One reason for the missing data and studies in this area of research is the lack of a protocol for the detection of, and suitable methods for the characterization of, NPls in the field. Our primary aim is to identify gaps in knowledge throughout the review and define future directions of research to address the impacts of NPls in aquatic environments. The development of consistent and standardized sets of procedures would address the gaps in knowledge regarding the formation and degradation of NPls as well as sampling and characterizing natural NPls needed to observe the full extent of NPls on aquatic biota and biofilm communities.

Removal of nanoplastics in water treatment processes: A review

Nanoplastics are drawing a significant attention as a result of their propensity to spread across the environment and pose a threat to all organisms. The presence of nanoplastics in water is given attention nowadays as the transit of nanoplastics occurs through the aquatic ecosphere besides terrestrial mobility. The principal removal procedures for macro-and micro-plastic particles are effective, but nanoparticles escape from the treatment, increasing in the water and significantly influencing the society. This critical review is aimed to bestow the removal technologies of nanoplastics from aquatic ecosystems, with a focus on the treatment of freshwater, drinking water, and wastewater, as well as the importance of transit and its impact on health concerns. Still, there exists a gap in providing a collective knowledge on the methods available for nanoplastics removal. Hence, this review offered various nanoplastic removal technologies (microorganism-based degradation, membrane separation with a reactor, and photocatalysis) that could be the practical/effective measures along with the traditional procedures (filtration, coagulation, centrifugation, flocculation, and gravity settling). From the analyses of different treatment systems, the effectiveness of nanoplastics removal depends on various factors, source, size, and type of nanoplastics apart from the treatment method adopted. Combined removal methods, filtration with coagulation offer great scope for the removal of nanoplastics from drinking water with >99 % efficiency. The collected data could serve as base-line information for future research and development in water nanoplastics cleanup.

Rice Husk-Derived Carbon Quantum Dots-Based Dual-Mode Nanoprobe for Selective and Sensitive Detection of Fe3+ and Fluoroquinolones

Herein, eco-friendly, water-soluble, and fluorescent carbon quantum dots (CQDs) with an average size of 8.3 nm were synthesized from rice husk (RH) using the hydrothermal method, and the CQDs were labeled as rice husk CQDs (RH-CQDs). The composition and surface functionalities were studied using X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy. A study on the impact of pH and irradiation time on fluorescence affirmed the stability of RH-CQDs. The as-synthesized nanosensor has high selectivity and sensitivity for Fe³⁺ ions. Several photophysical studies were performed to investigate the interaction between RH-CQDs and Fe³⁺. Using the time-correlated single-photon technique, it is determined that the average lifetime value of RH-CQDs significantly decreases in the presence of Fe³⁺, which supports a dynamic quenching mechanism. The developed sensor exhibited excellent sensitivity with a detection limit in the nanomolar range (149 nM) with a wide linear range of 0-1300 nM for Fe³⁺ ions. The prepared nanosensor was also used to detect Fe³⁺ in a tablet supplement with high recoveries. Moreover, the RH-CQD nanoprobe was used to detect other analytes (fluoroquinolones) using the fluorescence enhancement technique. It showed high selectivity and sensitivity toward ofloxacin (OFX) and ciprofloxacin (CPX). The detection limits calculated were 150 nM and 127 nM with a linearity range of 50-1150 nM for OFX and CPX, respectively. The enhancement of the average lifetime value and quantum yield in the presence of OFX and CPX favors the increased fluorescence property of RH-CQDs through hydrogen bonding and charge transfer. In this work, the integration of two different mechanisms (fluorescence quenching and fluorescence enhancement) was followed to construct a single sensing platform for accurate quantification of dual-mode nanosensors for the detection of metal ions and fluoroquinolones by the excited-state electron transfer and hydrogen bonding mechanism, respectively. This strategy also stimulates the detection of more than one analyte.

Priorities to inform research on marine plastic pollution in Southeast Asia

Southeast Asia is considered to have some of the highest levels of marine plastic pollution in the world. It is therefore vitally important to increase our understanding of the impacts and risks of plastic pollution to marine ecosystems and the essential services they provide to support the development of mitigation measures in the region. An interdisciplinary, international network of experts (Australia, Indonesia, Ireland, Malaysia, the Philippines, Singapore, Thailand, the United Kingdom, and Vietnam) set a research agenda for marine plastic pollution in the region, synthesizing current knowledge and highlighting areas for further research in Southeast Asia. Using an inductive method, 21 research questions emerged under five non-predefined key themes, grouping them according to which: (1) characterise marine plastic pollution in Southeast Asia; (2) explore its movement and fate across the region; (3) describe the biological and chemical modifications marine plastic pollution undergoes; (4) detail its environmental, social, and economic impacts; and, finally, (5) target regional policies and possible solutions. Questions relating to these research priority areas highlight the importance of better understanding the fate of marine plastic pollution, its degradation, and the impacts and risks it can generate across communities and different ecosystem services. Knowledge of these aspects will help support actions which currently suffer from transboundary problems, lack of responsibility, and inaction to tackle the issue from its point source in the region. Being profoundly affected by marine plastic pollution, Southeast Asian countries provide an opportunity to test the effectiveness of innovative and socially inclusive changes in marine plastic governance, as well as both high and low-tech solutions, which can offer insights and actionable models to the rest of the world.

Distribution, sources, migration, influence and analytical methods of microplastics in soil ecosystems

Microplastics are ubiquitous in soil ecosystems all over the world through source and migration. It is even estimated that the content of microplastics in terrestrial ecosystems exceeds the number of microplastics entering sea ecosystems. However, compared with the research on microplastics in marine ecosystems, the research and discussion on microplastics in soil ecosystems are still less. Transportation, film mulching and sewage sludge are three main sources of soil microplastics. The abundance, polymer type, size and shape of the microplastics are related to the source and they help to clarify the source. The characteristics of microplastics, farming measures, soil animal activities and other factors promote the migration of microplastics, which bring new challenges to the soil ecosystems and humans. This article summarizes the latest research findings on the effects of soil microplasticity on soil properties, plants, animals and microorganisms. The analysis methods of microplastics in soil can refer to the analysis methods of microplastics of aquatic sediments, because soil and aquatic sediments are similar, both of which are complex solid substrates. At present, the development of analytical methods is limited due to the complex matrix of soil and the small volume of microplastics, which requires continuous development and innovation. Through the summary and analysis of related articles, this article reviews the distribution, sources, migration, influence and analysis methods of soil microplastics. This article also critically analyzes the deficiencies in the studies of microplastics in the soil ecosystems, and made some suggestions for future work. The microplastics in soil ecosystems need further research and summary, which will help people further understand the potential hazards of microplastics.

Elimination of microplastics from the aquatic milieu: A dream to achieve

Microplastics (MPs) have become a significant source of concern as they have emerged as a widespread pollutant that harms the aquatic environment. It has become an enormous challenge, having the capacity to biomagnify and eventually affect human health, biodiversity, aquatic animals, and the environment. This review provides in-depth knowledge of how MPs interact with different toxic organic chemicals, antibiotics, and heavy metals in the aquatic environment and its consequences. Membrane technologies like ultrafiltration (UF), nanofiltration (NF), microfiltration (MF), and dynamic membranes can be highly effective techniques for the removal of MPs. Also, hybrid membrane techniques like advanced oxidation processes (AOPs), membrane fouling, electrochemical processes, and adsorption processes can be incorporated for superior efficiency. The review also focuses on the reactor design and performance of several membrane-based filters and bioreactors to develop practical, feasible, and sustainable membrane technologies. The main aim of this work is to throw light on the alarming scenario of microplastic pollution in the aquatic milieu and strategies that can be adopted to tackle it.

Coronas of micro/nano plastics: a key determinant in their risk assessments

As an emerging pollutant in the life cycle of plastic products, micro/nanoplastics (M/NPs) are increasingly being released into the natural environment. Substantial concerns have been raised regarding the environmental and health impacts of M/NPs. Although diverse M/NPs have been detected in natural environment, most of them display two similar features, i.e.,high surface area and strong binding affinity, which enable extensive interactions between M/NPs and surrounding substances. This results in the formation of coronas, including eco-coronas and bio-coronas, on the plastic surface in different media. In real exposure scenarios, corona formation on M/NPs is inevitable and often displays variable and complex structures. The surface coronas have been found to impact the transportation, uptake, distribution, biotransformation and toxicity of particulates. Different from conventional toxins, packages on M/NPs rather than bare particles are more dangerous. We, therefore, recommend seriously consideration of the role of surface coronas in safety assessments. This review summarizes recent progress on the eco-coronas and bio-coronas of M/NPs, and further discusses the analytical methods to interpret corona structures, highlights the impacts of the corona on toxicity and provides future perspectives.

Valorizing plastic toy wastes to flammable gases through CO2-mediated pyrolysis with a Co-based catalyst

Toys are discarded due to their short life cycle. Unfortunately, development of sustainable disposal platform for toy has not gained particular concern. To establish a reliable disposal platform, this study employed a pyrolysis platform to valorize plastics into value-added fuels. To confer more environmentally resilient process, CO₂ was used as a feedstock to enhance the process efficiency from a perspective of the yield of flammable gases. To this end, waste toy brick (WTB) was used as a model compound. The exact types of plastics (polyacrylonitrile, polybutadiene, polystyrene, and polymethyl methacrylate) in WTB were experimentally determined. In pyrolysis of WTB, the complicated mixture of benzene derivatives was inevitably generated. To detoxify them by means of syngas (H₂/CO) production, catalytic pyrolysis was performed. Co catalyst effectively induced chemical bond scissions, leading to substantially enhanced H₂ formation. Also, the gas phase reactions (GPRs) between CO₂ and volatile compounds over Co catalyst expedited the production rate of CO, and such CO enhancement effectively offered a chance to mitigate toxic chemical generations. The synergistic contribution of CO₂ and Co catalyst enhanced syngas formation more than 25 times in reference to pyrolysis of WTB without Co catalyst. The GPRs also greatly prevented catalyst deactivation.

Fate and removal efficiency of polystyrene nanoplastics in a pilot drinking water treatment plant

Occurrence of microplastics and nanoplastics in aquatic systems, as well as in water compartments used to produce drinking water have become a major concern due to their impact on the environment and public health. Nanoplastics in particular, in regard to their fate and removal efficiency in drinking water treatment plants (DWTP), which ensure water quality and supply drinking water for human consumption have been, by far, rarely investigated. This study investigates the removal efficiency of polystyrene (PS) nanoplastics in a conventional water treatment plant providing drinking water for 500'000 consumers. For that purpose, a pilot-scale DWTP, located within the main treatment plant station, reproducing at a reduced scale the different processes and conditions of the main treatment plant is used. The results show that filtration process through sand and granular activated carbon (GAC) filters in the absence of coagulation achieves an overall nanoplastic removal of 88.1%. The removal efficiency of filtration processes is mainly attributed to physical retention and adsorption mechanisms. On the other hand, it is found that coagulation process greatly improves the removal efficiency of nanoplastics with a global removal efficiency equal to 99.4%. The effective removal efficiency of sand filtration increases considerably from 54.3% to 99.2% in the presence of coagulant, indicating that most of PS nanoplastics are removed during sand filtration process. The higher removal efficiency with the addition of coagulant is related to nanoplastics surface charge reduction and aggregation thus significantly increasing their retention in the filter media.

Post-fabrication structural changes and enhanced photodegradation activity of semiconductors@zeolite composites towards noxious contaminants

This review article provides the recent progress in semiconductor-based zeolite photoactive materials for the application of noxious contaminants removal. The rapidly expanding industrialization and globalization cause serious threats to the environment or water bodies. The semiconductor@zeolite photocatalysts were implemented for water quality management/sustainment. The exclusive properties of zeolite material have been elaborated with their role in the photocatalysis process. The photoactive material's properties like single-atom catalysts (SACs), distribution of metal in the zeolite crystal were elaborated along with their role in catalytic reactions. Differently prepared semiconductor@zeolite composites such as TiO₂@zeolite, binary and ternary composites, Fe/Ag/bismuth-modified/ZnO/ZnS/NiO/g-C₃N₄/core-shell/quantum dots modified zeolite composites, were systematically summarized. The research progress in morphologies, structural effect, degradation mechanism were recapitulated and tabulated form of % degradation with their optimal parameters such as catalyst dose, pollutant concentrations, pH, light source intensities were also provided. The significance of zeolite frameworks, the structural properties of semiconductor@zeolite photoactive materials to enhance the degradation efficiencies was explored. Analysis of the intermediate products of Norfloxacin, TCDD (2,3,7,8-tetrachlorodibenzo-p-dioxin), TCDF (2,3,7,8-tetrachlorodibenzofuran), diclofenac contaminants were systematically represented and structurally identified by GC-MS/HPLC-MS techniques.

On the degradation of (micro)plastics: Degradation methods, influencing factors, environmental impacts

Plastics and microplastics are difficult to degrade in the natural environment due to their hydrophobicity, the presence of stable covalent bonds and functional groups that are not susceptible to attack. In nature, microplastics are more likely to attract other substances due to their large specific surface area, which further prevents degradation from occurring. Some of these substances are toxic and harmful, and can be spread to various organisms through the food chain along with the microplastics to cause harm to them. Degradation is an effective way to eliminate plastic pollution, and a comprehensive understanding of the methods and mechanisms of plastic degradation is necessary, because it is the result of synergistic effects of several degradation methods, both in nature and in consideration of future engineering applications. The authors firstly summarize the degradation methods of (micro)plastics; secondly, review the influence of intrinsic properties and environmental factors during the degradation process; finally, discuss the environmental impact of the degradation products of (micro)plastics. It is evident that the degradation of (micro)plastics still has many challenges to overcome, and there are no mature and effective methods that can be applied in engineering practice or widely used in nature. Therefore, there is an urgent need for research on the degradation of (micro)plastics.