Elimination study of the chemotherapy drug tamoxifen by different advanced oxidation processes: Transformation products and toxicity assessment

Estimation of suspected estrogenic transformation products generated during preservative butylparaben chlorination using a simplified effect-based analysis approach

Estrogenic transformation products (TPs) generated after water chlorination can be considered as an environmental and health concern, since they can retain and even increase the estrogenicity of the parent compound, thus posing possible risks to drinking water safety. Identification of the estrogenic TPs generated from estrogenic precursor during water chlorination is important. Herein, butylparaben (BuP), which was widely used as preservative in food, pharmaceuticals and personal care products (PPCPs), was selected for research. A simplified effect-based analysis (EDA) approach was applied for the identification of estrogenic TPs generated during BuP chlorination. Despite the removal of BuP corresponds to the decrease of estrogenicity in chlorinated samples, an significant increase of estrogenicity was observed (at T = 30 min, presented an estrogenicity equivalent to 17β-estradiol). Chemical analysis of the estrogenic chlorinated samples that have been previously subjected to biological analysis (in vitro assays), in combination with the principal component analysis (PCA) evaluation, followed by validating the estrogenic potency of most relevant estrogenic TPs through an in silico approach (molecular dynamics simulations), identified that the halogenated TP3 (3,5-Dichloro-butylparaben) increased by 62.5 % and 61.8 % of the estrogenic activity of the parent compound in samples chlorinated with 30 min and 1 h, respectively being classified as a potentially estrogenic activity driver after BuP chlorination. This study provides a scientific basis for the more comprehensive assessment of the environmental and health risk associated with BuP chlorination, highlighting the necessity of identifying the unknown estrogenic TPs generateded from estrogenic precursors chlorination.

Occurrence of iodinated contrast media (ICM) in water environments and their control strategies with a particular focus on iodinated by-products formation: A comprehensive review

Iodinated contrast media (ICM), one of the pharmaceutical and personal care products (PPCPs), are frequently detected in various water bodies due to the strong biochemical stability and recalcitrance to conventional water treatment. Additionally, ICM pose a risk of forming iodinated by-products that can be detrimental to the aquatic ecosystem. Consequently, effectively removing ICM from aqueous environments is a significant concern for environmental researchers. This article provides a comprehensive review of the structural characteristics of ICM, their primary source (e.g., domestic and hospital wastewater), detected concentrations in water environments, and ecological health hazards associated with them. The current wastewater treatment technologies for ICM control are also reviewed in detail with the aim of providing a reference for future research. Prior researches have demonstrated that traditional treatment processes (such as physical adsorption, biochemical method and chemical oxidation method) have inadequate efficiencies in the removal of ICM. Currently, the application of advanced oxidation processes to remove ICM has become extensive, but there are some issues like poor deiodination efficiency and the risk of forming toxic intermediates or iodinated by-products. Conversely, reduction technologies have a high deiodination rate, enabling the targeted removal of ICM. But the subsequent treatment issues related to iodine (such as I- and OI-) are often underestimated, potentially generating iodinated by-products during the subsequent treatment processes. Hence, we proposed using combined reduction-oxidation technologies to remove ICM and achieved synchronous control of iodinated by-products. In the future, it is recommended to study the degradation efficiency of ICM and the control efficiency of iodinated by-products by combining different reduction and oxidation processes.

Inactivation of antibiotic-resistant bacteria in hospital wastewater by ozone-based advanced water treatment processes

The emergence and spread of antimicrobial resistance (AMR) continue on a global scale. The impacts of wastewater on the environment and human health have been identified, and understanding the environmental impacts of hospital wastewater and exploring appropriate forms of treatment are major societal challenges. In the present research, we evaluated the efficacy of ozone (O3)-based advanced wastewater treatment systems (O3, O3/H2O2, O3/UV, and O3/UV/H2O2) for the treatment of antimicrobials, antimicrobial-resistant bacteria (AMRB), and antimicrobial resistance genes (AMRGs) in wastewater from medical facilities. Our results indicated that the O3-based advanced wastewater treatment inactivated multiple antimicrobials (>99.9%) and AMRB after 10-30 min of treatment. Additionally, AMRGs were effectively removed (1.4-6.6 log10) during hospital wastewater treatment. The inactivation and/or removal performances of these pollutants through the O3/UV and O3/UV/H2O2 treatments were significantly (P < 0.05) better than those in the O3 and O3/H2O2 treatments. Altered taxonomic diversity of microorganisms based on 16S rRNA gene sequencing following the O3-based treatment showed that advanced wastewater treatments not only removed viable bacteria but also removed genes constituting microorganisms in the wastewater. Consequently, the objective of this study was to apply advanced wastewater treatments to treat wastewater, mitigate environmental pollution, and alleviate potential threats to environmental and human health associated with AMR. Our findings will contribute to enhancing the effectiveness of advanced wastewater treatment systems through on-site application, not only in wastewater treatment plants (WWTPs) but also in medical facilities. Moreover, our results will help reduce the discharge of AMRB and AMRGs into rivers and maintain the safety of aquatic environments.

Degradation of 75 organic micropollutants in fresh human urine and water by UV advanced oxidation process

In household wastewater, a large proportion of organic micropollutants (OMPs) load is attributed to human urine. OMPs could pose a risk to human and environmental health when urine collected in source-separating sanitation systems is recycled as crop fertiliser. This study evaluated degradation of 75 OMPs in human urine treated by a UV-based advanced oxidation process. Fresh urine and water samples were spiked with a broad range of OMPs and fed into a photoreactor equipped with a UV lamp (185 and 254 nm) that generated free radicals in situ. Degradation rate constant and the energy required to degrade 90% of all the OMPs in both matrices were determined. At a UV dose of 2060 J m-2, average ΣOMP degradation of 99% (±4%) in water and 55% (±36%) in fresh urine was achieved. The energy demand for removal of OMPs in water was <1500 J m-2, but for removal of OMPs in urine at least 10-fold more energy was needed. A combination of photolysis and photo-oxidation can explain the degradation of OMPs during UV treatment. Organic substances (e.g. urea, creatinine) likely inhibited degradation of OMPs in urine by competitively absorbing UV-light and scavenging free radicals. There was no reduction in the nitrogen content of urine during treatment. In summary, UV treatment can reduce the load of OMPs to urine recycling sanitation systems.

Guidance document on the impact of water treatment processes on residues of active substances or their metabolites in water abstracted for the production of drinking water

This guidance document provides a tiered framework for risk assessors and facilitates risk managers in making decisions concerning the approval of active substances (AS) that are chemicals in plant protection products (PPPs) and biocidal products, and authorisation of the products. Based on the approaches presented in this document, a conclusion can be drawn on the impact of water treatment processes on residues of the AS or its metabolites in surface water and/or groundwater abstracted for the production of drinking water, i.e. the formation of transformation products (TPs). This guidance enables the identification of actual public health concerns from exposure to harmful compounds generated during the processing of water for the production of drinking water, and it focuses on water treatment methods commonly used in the European Union (EU). The tiered framework determines whether residues from PPP use or residues from biocidal product use can be present in water at water abstraction locations. Approaches, including experimental methods, are described that can be used to assess whether harmful TPs may form during water treatment and, if so, how to assess the impact of exposure to these water treatment TPs (tTPs) and other residues including environmental TPs (eTPs) on human and domesticated animal health through the consumption of TPs via drinking water. The types of studies or information that would be required are described while avoiding vertebrate testing as much as possible. The framework integrates the use of weight-of-evidence and, when possible alternative (new approach) methods to avoid as far as possible the need for additional testing.

Toxicity Evaluation and Effect-Based Identification of Chlorine Disinfection Products of the Anti-COVID-19 Drug Chloroquine Phosphate

Antiviral transformation products (TPs) generated during wastewater treatment are an environmental concern, as their discharge, in considerable amounts, into natural waters during a pandemic can pose possible risks to the aquatic environment. Identification of the hazardous TPs generated from antivirals during wastewater treatment is important. Herein, chloroquine phosphate (CQP), which was widely used during the coronavirus disease-19 (COVID-19) pandemic, was selected for research. We investigated the TPs generated from CQP during water chlorination. Zebrafish (Danio rerio) embryos were used to assess the developmental toxicity of CQP after water chlorination, and hazardous TPs were estimated using effect-directed analysis (EDA). Principal component analysis revealed that the developmental toxicity induced by chlorinated samples could be relevant to the formation of some halogenated TPs. Fractionation of the hazardous chlorinated sample, along with the bioassay and chemical analysis, identified halogenated TP387 as the main hazardous TP contributing to the developmental toxicity induced by chlorinated samples. TP387 could also be formed in real wastewater during chlorination in environmentally relevant conditions. This study provides a scientific basis for the further assessment of environmental risks of CQP after water chlorination and describes a method for identifying unknown hazardous TPs generated from pharmaceuticals during wastewater treatment.

Anticancer drugs in wastewater and natural environments: A review on their occurrence, environmental persistence, treatment, and ecological risks

The consumption of anticancer drugs (also known as chemotherapy drugs or antineoplastic drugs) has augmented over the last decades due to increased cancer incidence. Although there is an increasing concern about the presence of pharmaceutical compounds in natural environments and urban/domestic wastewater, anticancer drugs used in chemotherapy and anticancer medication have received less attention. In this review, the occurrence, environmental persistence, and known and potential ecological impacts of anticancer drugs is discussed. This review shows that these compounds are being increasingly detected in effluents of hospitals, influents and effluents of wastewater treatment plants, river surface water and sediments, groundwater, and even drinking water. Anticancer drugs can impact aquatic organisms such as algae, crustaceans, rotifers, and fish and may promote changes in soil and water microbial communities that may alter ecosystem functioning. Our knowledge of technologies for the removal of anticancer drugs is still limited, and these drugs can be dispersed in nature in a diffuse way in an uncontrolled manner. For this reason, an improved understanding of the presence, persistence, and ecological impacts of anticancer drugs in wastewater and natural environments is needed to help design management strategies, protect aquatic microorganisms, and mitigate potential ecological impacts.

Variation of the toxicity caused by key contaminants in industrial wastewater along the treatment train of Fenton-activated sludge-advanced oxidation processes

Industrial wastewater contains a mixture of refractory and hazardous pollutants that have comprehensive toxic effects. We investigated the treatment of a long-chain industrial wastewater treatment train containing Fenton, biological anoxic/oxic (AO), and heterogeneous ozone catalytic oxidation (HOCO) processes, and evaluated their detoxification effect based on the analysis of the genic toxicity of some key contaminants. The results showed that although the effluent met the discharge standard in terms of traditional quality parameters, the long-chain treatment process could not effectively detoxify the industrial wastewater. The analysis results of summer samples showed that the Fenton process increased the total toxicity and genotoxicity of the organics, concerned metals, and non-volatile pollutants, whereas the A/O process increased the toxicity of the organics and non-volatile pollutants, and the HOCO process led to higher toxicity caused by metals and non-volatile pollutants. The outputs of the winter samples indicated that the Fenton process reduced the total toxicity and genotoxicity caused by non-volatile pollutants but increased that of the organics and concerned metals. The effect of the A/O process on the effluent toxicity in winter was the same as that in summer, whereas the HOCO process increased the total toxicity and genotoxicity of the metals in winter samples. Correlation analysis showed that various toxicity stresses were significantly correlated with the variation of these key pollutants in wastewater. Our results could provide a reference for the optimization of industrial wastewater treatment plants (IWTPs) by selecting more suitable treatment procedures to reduce the toxicity of different contaminants.

Inactivation of Antibiotic-Resistant Bacteria in Wastewater by Ozone-Based Advanced Water Treatment Processes

The inactivating effect of ozone (O₃)-based advanced oxidation processes (AOPs) (O₃/H₂O₂, O₃/UV, and O₃/UV/H₂O₂ systems) on antimicrobial-resistant bacteria (AMRB) and antimicrobial-susceptible bacteria (AMSB) in sewage treatment plant (STP) wastewater was investigated. The AMRB were grouped into six classes: carbapenem-resistant Enterobacteriaceae (CRE), extended-spectrum β-lactamase (ESBL)-producing Enterobacteriaceae (ESBL-E), multidrug-resistant Acinetobacter (MDRA), multidrug-resistant Pseudomonas aeruginosa (MDRP), methicillin-resistant Staphylococcus aureus (MRSA), and vancomycin-resistant Enterococcus (VRE); these classes constituted the World Health Organization (WHO) global priority list of AMRB. The results indicate that O₃-based advanced wastewater treatment inactivated all AMRB and AMSB (>99.9%) after 10 min of treatment, and significant differences (p < 0.5) were not observed in the disinfection of AMRB and AMSB by each treatment. Altered taxonomic diversity of micro-organisms based on 16S rRNA gene sequencing via O₃/UV and O₃/UV/H₂O₂ treatment showed that advanced wastewater treatments not only inactivated AMRB but also removed antimicrobial resistance genes (AMRGs) in the wastewater. Consequently, this study recommends the use of advanced wastewater treatments for treating the STP effluent, reducing environmental pollution, and alleviating the potential hazard to human health caused by AMRB, AMSB, and infectious diseases. Overall, this study provides a new method for assessing environmental risks associated with the spread of AMRB and AMSB in aquatic environments, while keeping the water environment safe and maintaining human health.

Multifunctional Membranes-A Versatile Approach for Emerging Pollutants Removal

This paper presents a comprehensive literature review surveying the most important polymer materials used for electrospinning processes and applied as membranes for the removal of emerging pollutants. Two types of processes integrate these membrane types: separation processes, where electrospun polymers act as a support for thin film composites (TFC), and adsorption as single or coupled processes (photo-catalysis, advanced oxidation, electrochemical), where a functionalization step is essential for the electrospun polymer to improve its properties. Emerging pollutants (EPs) released in the environment can be efficiently removed from water systems using electrospun membranes. The relevant results regarding removal efficiency, adsorption capacity, and the size and porosity of the membranes and fibers used for different EPs are described in detail.

Treatment-driven removal efficiency, product formation, and toxicity evolution of antineoplastic agents: Current status and implications for water safety assessment

Antineoplastic compounds, designed for chemotherapeutic anticancer therapy, have become emerging contaminants of global concern over the past decade due to their ubiquitous occurrence, environmental persistence, and multiple adverse effects on aquatic ecosystems. Increasing efforts have been devoted to developing efficient strategies for remediating water containing these micropollutants. In this study, the physicochemical properties, natural attenuation, and chemical reactivity with aqueous oxidizing species of five antineoplastic drugs with the highest environmental prevalence (i.e., tamoxifen, cyclophosphamide, ifosfamide, 5-fluorouracil, and methotrexate) were summarized. The removal performance, transformation products (TPs) of varying structures, overall reaction pathways, and toxicity evolution during different treatments were evaluated and discussed. Additionally, the biodegradability and multi-endpoint toxicity of each TP were predicted using in silico QSAR software. Depending on their distinct inherent structures, the reactivity of the antineoplastics with oxidizing species varied, with hydroxyl radicals exhibiting unparalleled merits in rapid oxidation. Complete elimination of these contaminants was observed during oxidative treatments, but with inadequate mineralization. Notably, the increase in toxicity within multiple processes was determined based on both experimental bioassays and theoretical predictions. This may be attributed to the adverse effects induced by the large number of identified and unknown TPs individually and in combination. Together with the environmental persistence and low biodegradability of most TPs, these results necessitate the application of efficient post-treatments in conjunction with a more thorough water safety evaluation (e.g., using high-throughput screening) of the mixtures of treated water and wastewater.

Application of UV-activated persulfate and peroxymonosulfate processes for the degradation of 1,2,3-trichlorobenzene in different water matrices

The presence of a large number of micropollutants in the environment, including priority and emerging substances, poses a significant risk to surface and groundwater quality. Among them, trichlorobenzenes are widely used in the syntheses of dyes, pesticides, solvents, and other chemicals and have been identified as priority pollutants by the European Water Framework Directive. The main goal of this study was to investigate the behavior of 1,2,3-trichlorobenzene (TCB) during the sulfate radical-based advanced oxidation processes (SR-AOPs) involving UV activation of persulfate or peroxymonosulfate (UV/S₂O₈^2- and UV/HSO₅^- processes). For this purpose, TCB was subjected to SR-AOPs in synthetic water matrices containing humic acids or hydrogencarbonate and natural water samples and a comparative evaluation of the degradation process was made. The toxicity of the oxidation by-products was also assessed. The evaluation of TCB degradation kinetics results using principal component analysis indicates that the efficacy of the SR-AOPs was highly dependent on the pH, initial oxidant concentration, UV fluence, and matrix characteristics. In natural waters, TCB degradation by the UV/S₂O₈^2- process proved to be most effective in acidic conditions (pH 5), while the UV/HSO₅^- process showed the highest efficacy in basic conditions (pH 9.5), achieving a maximum TCB degradations of 97-99%. The obtained results indicate that UV/S₂O₈^2- and UV/HSO₅^- as new generation oxidation processes have significant potential for TCB removal from water and result in only minor toxicity after treatment (14-23% of Vibrio fischeri bioluminescence inhibition).

Effectiveness of Advanced Oxidation Processes in Wastewater Treatment: State of the Art

In recent years, many scientific studies have focused their efforts on quantifying the different types of pollutants that are not removed in wastewater treatment plants. Compounds of emerging concern (CECs) have been detected in different natural environments. The presence of these compounds in wastewater is not new, but they may have consequences in the future. These compounds reach the natural environment through various routes, such as wastewater. This review focuses on the study of tertiary treatment with advanced oxidation processes (AOPs) for the degradation of CECs. The main objective of the different existing AOPs applied to the treatment of wastewater is the degradation of pollutants that are not eliminated by means of traditional wastewater treatment.

Developments in the intensification of photo-Fenton and ozonation-based processes for the removal of contaminants of emerging concern in Ibero-American countries

Contaminants of emerging concern (CECs), such as pharmaceuticals, personal care products, pesticides, synthetic and natural hormones and industrial chemicals, are frequently released into the environment because of the inability of conventional processes in municipal wastewater treatment plants to remove them. Some examples of alternative options to remove such pollutants are photo-Fenton and ozone-based processes, which are two techniques widely studied in Ibero-American countries. In fact, this region has been responsible for delivering frequently publications and conferences on advanced oxidation processes. This work is a critical review of recent developments in the intensification of the two aforementioned advanced oxidation techniques for CECs elimination in the Ibero-American region. Specifically for the photo-Fenton process (pF), this study analyses strategies such as iron-complexation with artificial substances (e.g., oxalic acid and ethylenediamine-N,N'-disuccinic acid) and natural compounds (such as humic-like substances, orange juice or polyphenols) and hybrid processes with ultrasound. Meanwhile, for ozonation, the enhancement of CECs degradation by adding hydrogen peroxide (i.e., peroxone), ultraviolet or solar light, and combining (i.e., photolytic ozonation) with catalysts (i.e., catalytic ozonation) was reviewed. Special attention was paid to how efficient these techniques are for removing contaminants from water matrices, and any potentialities and weak points of the intensified processes.

Threat and sustainable technological solution for antineoplastic drugs pollution: Review on a persisting global issue

In the past 20 years, the discharge of pharmaceuticals and their presence in the aquatic environment have been continuously increasing and this has caused serious public health and environmental concerns. Antineoplastic drugs are used in chemotherapy, in large quantities worldwide, for the treatment of continuously increasing cancer cases. Antineoplastic drugs also contaminate water sources and possess mutagenic, cytostatic and eco-toxicological effects on microorganisms present in the aquatic environment as well as on human health. Due to the recalcitrant nature of antineoplastic drugs, the commonly used wastewater treatment processes are not able to eliminate these drugs. Globally, various anticancer drugs are being consumed during chemotherapy in hospitals and households by out-patients. These anti-cancer agents enter the water bodies in their original form or as metabolites via urine and faeces of the out-patients or the patients admitted in hospitals. Due to its high lipid solubility, the antineoplastic drugs accumulate in the fatty tissues of the organisms. These drugs enter through the food chain and cause adverse health effects on humans due to their cytotoxic and genotoxic properties. The United States Environmental Protection Agency (US-EPA) and the Organization for Economic Cooperation and Development (OECD) elucidated new regulations for the management of hazardous pharmaceuticals in the water environment. In this paper, the role of antineoplastic agents as emerging water contaminants, its transfer through the food chain, its eco-toxicological properties and effects, technological solutions and management aspects were reviewed.

New insights into transformation pathways of a mixture of cytostatic drugs using Polyester-TiO2 films: Identification of intermediates and toxicity assessment

The photocatalytic activity of two bio-based polymer photocatalysts [poly(ethylene terephthalate)-TiO₂ (PET-TiO₂) and poly(L-lactic acid)-graphene oxide-TiO₂ (PLLA-GO-TiO₂)] towards Tamoxifen (TAM), Cyclophosphamide (CP), Cytarabine (CYT) and 5-Fluorouracil (5-FLU) removal was explored and compared. The highest photocatalytic activity for the degradation of the cytostatic drugs was accomplished by PET-TiO₂. Among the contaminants, TAM was the most easily removed, requiring 90 min for complete elimination, while CP showed the highest resistance to photocatalysis, not being completely removed after 6 h. Liquid chromatography coupled with high-resolution mass spectrometry analysis was employed for the identification of several transformation products (TPs) and potential pathways were proposed. A total of seventy (70) TPs including thirty-four (34) novel ones detected in AOPs were identified. The ecotoxicity of the mixture of the cytostatic drugs and TPs formed during the photocatalytic treatment was evaluated using Daphnia magna assay and was associated with the occurrence of specific TPs during the treatment process. The follow-up ECOSAR (Ecological Structure Activity Relationship) analysis further elucidated that only minor chemical transformations, such as the hydroxylation or the oxidative opening of an aromatic ring system, could hamper the adverse effects of cytostatic drugs in aquatic species. Such a comparative study on the mixture toxicity of cytostatics and their TPs is presented for the first time.

Effect-Based Identification of Hazardous Antibiotic Transformation Products after Water Chlorination

Antibiotic transformation products (TPs) generated during water treatment can be considered as an environmental concern, since they can retain part of the bioactivity of the parent compound. Effect-directed analysis (EDA) was applied for the identification of bioactive intermediates of azithromycin (AZI) and ciprofloxacin (CFC) after water chlorination. Fractionation of samples allowed the identification of bioactive intermediates by measuring the antibiotic activity and acute toxicity, combined with an automated suspect screening approach for chemical analysis. While the removal of AZI was in line with the decrease of bioactivity in chlorinated samples, an increase of bioactivity after complete removal of CFC was observed (at >0.5 mgCl₂/L). Principal component analysis (PCA) revealed that some of the CFC intermediates could contribute to the overall toxicity of the chlorinated samples. Fractionation of bioactive samples identified that the chlorinated TP296 (generated from the destruction of the CFC piperazine ring) maintained 41%, 44%, and 30% of the antibiotic activity of the parent compound in chlorinated samples at 2.0, 3.0, and 4.0 mgCl₂/L, respectively. These results indicate the spectrum of antibacterial activity can be altered by controlling the chemical substituents and configuration of the CFC structure with chlorine. On the other hand, the potential presence of volatile DBPs and fractionation losses do not allow for tentative confirmation of the main intermediates contributing to the acute toxic effects measured in chlorinated samples. Our results encourage further development of new and advanced methodologies to study the bioactivity of isolated unknown TPs to understand their hazardous effects in treated effluents.

Removal of pharmaceutically active compounds from synthetic and real aqueous mixtures and simultaneous disinfection by supported TiO2/UV-A, H2O2/UV-A, and TiO2/H2O2/UV-A processes

Pharmaceutically active compounds are carried into aquatic bodies along with domestic sewage, industrial and agricultural wastewater discharges. Psychotropic drugs, which can be toxic to the biota, have been detected in natural waters in different parts of the world. Conventional water treatments, such as activated sludge, do not properly remove these recalcitrant substances, so the development of processes able to eliminate these compounds becomes very important. Advanced oxidation processes are considered clean technologies, capable of achieving high rates of organic compounds degradation, and can be an efficient alternative to conventional treatments. In this study, the degradation of alprazolam, clonazepam, diazepam, lorazepam, and carbamazepine was evaluated through TiO₂/UV-A, H₂O₂/UV-A, and TiO₂/H₂O₂/UV-A, using sunlight and artificial irradiation. While using TiO₂ in suspension, best results were found at [TiO₂] = 0.1 g L^-1. H₂O₂/UV-A displayed better results under acidic conditions, achieving from 60 to 80% of removal. When WWTP was used, degradation decreased around 50% for both processes, TiO₂/UV-A and H₂O₂/UV-A, indicating a strong matrix effect. The combination of both processes was shown to be an adequate approach, since removal increased up to 90%. H₂O₂/UV-A was used for disinfecting the aqueous matrices, while mineralization was obtained by TiO₂-photocatalysis.

Ozonation of Tamoxifen and Toremifene: Reaction Kinetics and Transformation Products

The oxidation of the two antiestrogenic pharmaceuticals tamoxifen and toremifene with ozone in water was investigated concerning kinetics, reaction pathway, and transformation product formation. For both compounds a high dependency of second order rate constants and products on pH was determined. In case of full protonation of the amine (cation) ozone attacks with a second order rate constant of 1.57 × 10⁴ M^-1 s^-1 for tamoxifen and 4.37 × 10³ M^-1 s^-1 for toremifene. The neutral tertiary amine has an unexpected high second order rate constant of 3.17 × 10⁸ M^-1 s^-1 for tamoxifen and 1.46 × 10⁸ M^-1 s^-1 for toremifene. For the reaction of ozone and the tertiary amine only N-oxide formation was observed. p K_a values for tamoxifen (9.49 ± 0.22) and toremifene (9.57 ± 0.22) can be reported based on experimental data. Eight transformation products (TPs) were observed and identified based on MS/MS spectra or a reference standard. Products observed derived from Criegee reaction and hydroxylation as well as N-oxide formation. Further TPs from reactions with TAM products were combinations of N-oxides, Criegee products and hydroxylation products. Thus, reaction pathways can be derived and primary and secondary TPs distinguished for the first time.

Ecotoxicological effects prior to and after the ozonation of tamoxifen

The endocrine disrupting micropollutant tamoxifen can induce several effects on aquatic organisms. It is introduced into the environment mainly by wastewater treatment plant effluents. To reduce the discharge of micropollutants into surface waters, ozonation can be used as additional wastewater treatment option. For only few transformation products (TPs) formed by ozonation ecotoxicological data are available. To enable an initial estimation of ecotoxicological potentials of the TPs formed after the ozonation of tamoxifen, acute toxicity (immobilization) to Daphnia magna and green algae growth inhibition using Desmodesmus subspicatus were determined for several ozone doses spiked at pH 3 and pH 7. The initial immobilization of D. magna by tamoxifen was not further observed after ozonation. In contrast, the green algae growth inhibition increased due to ozonation of tamoxifen. Overall, five transformation products were observed. For three TPs, positive correlations of green algae growth inhibition and peak area were determined, whereas two TPs do not induce the residual effects. Based on our observations, TP 270 can be assumed as most potent of the formed TPs concerning green algae growth inhibition. Since the effect is not induced by formed N-oxides, green algae growth inhibition could be reduced by sufficient ozone exposure during wastewater treatment.

Comparative study of the toxicity between three non-steroidal anti-inflammatory drugs and their UV/Na2S2O8 degradation products on Cyprinus carpio

The efficiency of advanced oxidation processes (AOPs) for disposing of non-steroidal anti-inflammatory drugs (NSAIDs) has been widely studied, but the environmental fates and effects of the NSAIDs and their degradation products (DPs) are poorly understood. In this study, the efficiency of ultraviolet light/Na₂S₂O₈ (UV/PS) in degrading three NSAIDs—diclofenac, naproxen, and ibuprofen—and the toxicity of their DPs on Cyprinus carpio (C. carpio) was investigated. Results showed that the three NSAIDs can be completely removed (removal rate > 99.9%) by UV/PS, while the mineralization rate of the NSAIDs was only 28%. When C. carpio were exposed to 0.1 μM NSAIDs, 10 μM persulfate (PS), and 0.1 μM DPs of the NSAIDs for 96 h, respectively, the toxicity effects are as the NSAID DPs > PS > NSAIDs. Research results into the time-dependent effect of NSAID DPs on C. carpio demonstrated that obvious toxicity effects were observed in the first 48 hours, and the toxicity effects strengthened over time. NSAID DPs may have more severe toxicity effects than NSAIDs on C. carpio; therefore, the operating conditions of UV/PS must be optimized to eliminate the ecotoxicity of DPs.

Endocrine effects after ozonation of tamoxifen

Ozonation is used as additional wastewater treatment option to remove recalcitrant micropollutants. It also removes the estrogenic activity found in wastewater but not always the anti-estrogenic activity. This can be explained by an incomplete removal of anti-estrogenic micropollutants or by formation of transformation products (TPs) which retain the activity. The present study investigates the degradation of the anti-estrogenic pharmaceutical tamoxifen in pure water, regarding TP formation and related anti-estrogenic effect using Arxula adeninivorans yeast estrogen screen (A-YES). In total, five transformation products were detected: three N-oxides and two further products (TP 270 and TP 388). For the transformation product TP 270 a correlation of the extent of formation with an increase of the anti-estrogenic activity was determined, demonstrating that transformation products from ozonation can be more active in a bioassay than the parent compounds. Our study shows also that the transformation of tamoxifen to N-oxides reduces the anti-estrogenic activity. The reactivity of amines towards ozone typically increases with pH, since only deprotonated amines react with ozone. Hence, removal of the endocrine activity by N-oxide formation may be disfavored at low pH.

Integrating the Fenton's Process with Biofiltration by to Reduce Chemical Oxygen Demand of Winery Effluents

The discharge of poorly decontaminated winery wastewater remains a serious environmental problem in many regions, and the industry is welcoming improved treatment methods. Here, an innovative decontamination approach integrating Fenton's process with biofiltration by Asian clams is proposed. The potential of this approach was assessed at the pilot scale using real effluent and by taking an actual industrial treatment system as a benchmark. Fenton peroxidation was observed to remove 84% of the effluent's chemical oxygen demand (COD), reducing it to 205 mg L. Subsequent biofiltration decreased the effluent's COD to approximately zero, well below the legal discharge limit of 150 mg L, in just 3 d. The reduction of the effluent's organic load through Fenton's process did not decrease its toxicity toward , but the effluent was much less harmful after biofiltration. The performance of the treatment proposed exceeded that of the integrated Fenton's process-sequencing batch reactor design implemented in the winery practice, where a residence time of around 10 d in the biological step typically results in 80 to 90% of COD removal. The method proposed is effective and compatible with typical winery budgets and potentially contributes to the management of a nuisance species.