Sorption and biodegradation of six pharmaceutically active compounds under four different redox conditions

Exploring long-term retention and reactivation of micropollutant biodegradation capacity

The factors limiting micropollutant biodegradation in the environment and how to stimulate this process have often been investigated. However, little information is available on the capacity of microbial communities to retain micropollutant biodegradation capacity in the absence of micropollutants or to reactivate micropollutant biodegradation in systems with fluctuating micropollutant concentrations. This study investigated how a period of 2 months without the addition of micropollutants and other organic carbon affected micropollutant biodegradation by a micropollutant-degrading microbial community. Stimulation of micropollutant biodegradation was performed by adding different types of dissolved organic carbon (DOC)-extracted from natural sources and acetate-increasing 10 × the micropollutant concentration, and inoculating with activated sludge. The results show that the capacity to biodegrade 3 micropollutants was permanently lost. However, the biodegradation activity of 2,4-D, antipyrine, chloridazon, and its metabolites restarted when these micropollutants were re-added to the community. Threshold concentrations similar to those obtained before the period of no substrate addition were achieved, but biodegradation rates were lower for some compounds. Through the addition of high acetate concentrations (108 mg-C/L), gabapentin biodegradation activity was regained, but 2,4-D biodegradation capacity was lost. An increase of bentazon concentration from 50 to 500 µg/L was necessary for biodegradation to be reactivated. These results provide initial insights into the longevity of micropollutant biodegradation capacity in the absence of the substance and strategies for reactivating micropollutant biodegrading communities.

Unveiling the influence of microaeration and sludge recirculation on enhancement of pharmaceutical removal and microbial community change of the novel anaerobic baffled biofilm - membrane bioreactor in treating building wastewater

This research aims to conduct a comparative investigation of the role played by microaeration and sludge recirculation in the novel anaerobic baffled biofilm-membrane bioreactor (AnBB-MBR) for enhancing pharmaceutical removal from building wastewater. Three AnBB-MBRs - R1: AnBB-MBR, R2: AnBB-MBR with microaeration and R3: AnBB-MBR with microaeration and sludge recirculation - were operated simultaneously to remove Ciprofloxacin (CIP), Caffeine (CAF), Sulfamethoxazole (SMX) and Diclofenac (DCF) from real building wastewater at the hydraulic retention time (HRT) of 30 h for 115 days. From the removal profiles of the targeted pharmaceuticals in the AnBB-MBRs, it was found that the fixed-film compartment (C1) could significantly reduce the targeted pharmaceuticals. The remaining pharmaceuticals were further removed with the microaeration compartment. R2 exhibited the utmost removal efficiency for CIP (78.0 %) and DCF (40.8 %), while SMX was removed most successfully by R3 (microaeration with sludge recirculation) at 91.3 %, followed by microaeration in R2 (88.5 %). For CAF, it was easily removed by all AnBB-MBR systems (>90 %). The removal mechanisms indicate that the microaeration in R2 facilitated the adsorption of CIP onto microaerobic biomass, while the enhanced biodegradation of CAF, SMX and DCF was confirmed by batch biotransformation kinetics and the adsorption isotherms of the targeted pharmaceuticals. The microbial groups involved in biodegradation of the targeted compounds under microaeration were identified as nitrogen removal microbials (Nitrosomonas, Nitrospira, Thiobacillus, and Denitratisoma) and methanotrophs (Methylosarcina, Methylocaldum, and Methylocystis). Overall, explication of the integration of AnBB-MBR with microaeration (R2) confirmed it as a prospective technology for pharmaceutical removal from building wastewater due to its energy-efficient approach characterized by minimal aeration supply.

Fate of sulfamethoxazole in wetland sediment under controlled redox conditions

Redox condition is an important controlling factor for contaminant removal in constructed wetlands; however, the redox-sensitivity of antibiotic removal in wetland sediments under controlled conditions with specific electron acceptors remains unclear. Here, using a 14C radioactive tracer, we explored fate of sulfamethoxazole (SMX) in a wetland sediment slurry under oxic, nitrate-reducing, iron-reducing, and methanogenic conditions. In the sterile treatment, unlike the comparable SMX dissipation from the water phase under four redox conditions, non-extractable residues (NERs) of SMX was highest formed in the sediment under oxic condition, mainly in sequestered and ester/amide-linked forms. Microorganisms markedly promoted SMX transformation in the slurry. The dissipation rate of SMX and its transformation products (TPs) followed the order: oxic ≈ iron-reducing > methanogenic >> nitrate-reducing conditions, being consistent with the dynamics of microbial community in the sediment, where microbial diversity was greater and networks connectivity linking dominant bacteria to SMX transformation were more complex under oxic and iron-reducing conditions. Kinetic modeling indicated that the transformation trend of SMX and its TPs into the endpoint pool NERs depended on the redox conditions. Addition of wetland plant exudates and sediment dissolved organic matter at environmental concentrations affected neither the abiotic nor the biotic transformation of SMX. Overall, the iron-reducing condition was proven the most favorable and eco-friendly for SMX transformation, as it resulted in a high rate of SMX dissipation from water without an increase in toxicity and subsequent formation of significant stable NERs in sediment. Our study comprehensively revealed the abiotic and biotic transformation processes of SMX under controlled redox conditions and demonstrated iron-reducing condition allowing optimal removal of SMX in constructed wetlands.

Composition, Release, and Transformation of Earthworm Tissue-Bound Residues of Tetrabromobisphenol A in Soil

Earthworms accumulate organic pollutants to form earthworm tissue-bound residues (EBRs); however, the composition and fate of EBRs in soil remain largely unknown. Here, we investigated the fate of tetrabromobisphenol A (TBBPA)-derived EBRs in soil for 250 days using a 14C-radioactive isotope tracer and the geophagous earthworm Metaphire guillelmi. The EBRs of TBBPA in soil were rapidly transformed into nonextractable residues (NERs), mainly in the form of sequestered and ester-linked residues. After 250 days of incubation, 4.9% of the initially applied EBRs were mineralized and 69.3% were released to extractable residues containing TBBPA and its transformation products (TPs, generated mainly via debromination, O-methylation, and skeletal cleavage). Soil microbial activity and autolytic enzymes of earthworms jointly contributed to the release process. In their full-life period, the earthworms overall retained 24.1% TBBPA and its TPs in soil and thus prolonged the persistence of these pollutants. Our study explored, for the first time, the composition and fate of organic pollutant-derived EBRs in soil and indicated that the decomposition of earthworms may release pollutants and cause potential environmental risks of concern, which should be included in both environmental risk assessment and soil remediation using earthworms.

Combination of multivariate data analysis and mixing modelling to assess tracer potential of contaminants of emerging concern in aquifers

Collected evidence has shown that contaminants of emerging concern (CECs) in conjunction with more conventional tracers (major ions, nutrients, isotopes etc.) can be used to trace pollution origin in aquatic systems. However, in highly mixed aquifer systems signals obtained from conventional tracers overlap diminishing their potential to be used as tracers. In this study, we present an approach that incorporates multivariate statistical analysis (principal component analysis (PCA) and Kohonen's Self-Organizing Map method (SOM)) and mixing modelling to identify the most suitable CECs to be employed as anthropogenic tracers. The study area is located in the Besòs River Delta (Barcelona, NE Spain) and represents the highly mixed aquifer system. A one-year monthly based monitoring campaign was performed to collect the information about the concentrations of 105 CECs as well as major and minor ions in the river and along the groundwater flow. The dimensionality of the obtained dataset was reduced to 25 CECs, based on their estimated health risk effects, for multivariate data analysis. The obtained results showed the overlap of conventional tracers' signals obtained from PCA. In case of CECs, PCA revealed differences in their distributions allowing the differentiation of the roles of natural attenuation processes, local and regional flows on their occurrence in different parts of the aquifer. This was not possible to do using solely CECs' distribution profiles. SOMs provided the lacking information about the modality of the distribution of each CECs, revealing their ability to represent factors controlling the groundwater hydrochemistry, which assist in defining their tracer potential. Based on the obtained results four identified persistent CECs, two with unimodal (lamotrigine and 5-Desamino-5-oxo-lamotrigine) and two with bimodal (carbamazepine and diazepam (higher modality was not revealed)) distributions, were selected to run a mixing model to compare their tracer performance.

Effect of dissolved organic carbon on micropollutant biodegradation by aquifer and soil microbial communities

Groundwater, a major source of drinking water worldwide, is often contaminated with micropollutants. Although microbial communities in aquifers and soils have the capability to biodegrade some micropollutants, this process is limited in situ. Biostimulation with dissolved organic carbon (DOC) is known to promote micropollutant biodegradation, but the role of DOC biodegradability is still poorly understood. This study investigated how three DOC types with different biodegradability (humics, dextran and acetate) affect the biodegradation of 15 micropollutants by aquifer and soil microbial communities under aerobic and nitrate reducing conditions. Although originating from different environments, both communities were able to biodegrade the same 4 micropollutants under aerobic conditions - 2,4-D, MCPP, chloridazon (CLZ) and chloridazon-desphenyl. However, DOC addition only affected MCPP biodegradation, promoting MCPP biodegradation regardless of DOC biodegradability. Biodegradation of 2,4-D, MCPP and CLZ under aerobic conditions was observed after a lag phase, whose duration differed per compound. 2,4-D was biodegraded first and fully. Aquifer community was able to degrade about half of the initial MCPP concentration (removal efficiency of 49.3 ± 11.7%). CLZ was fully biodegraded by the aquifer community, but not by the soil community, possibly due to substrate competition with organics originating from the inoculum. Therefore, the natural organic carbon present in the inocula and in environmental systems can influence micropollutant biodegradation. Under nitrate reducing conditions micropollutant biodegradation was not observed nor biostimulated by DOC addition. The results also highlight the importance of sufficient exposure time to trigger in situ micropollutant biodegradation.

Indene, indane and naphthalene in a mixture with BTEX affect aerobic compound biodegradation kinetics and indigenous microbial community development

BTEX (benzene, toluene, ethylbenzene, xylene) are common pollutants often found in former gasworks sites together with some other contaminants like indene, indane and naphthalene (Ie, Ia, N). This study aimed to evaluate the inhibitory or stimulative substrate interactions between BTEX, and Ie, Ia, N during aerobic biodegradation. For this, batch bottles, containing originally anaerobic subsurface sediments, groundwater and indigenous microorganisms from a contaminated former gasworks site, were spiked with various substrate combinations (BTEX, BTEXIe, BTEXIa, BTEXN, BTEXIeIa, BTEXIeN, BTEXIaN, BTEXIeIaN). Subsequently concentrations were monitored over time. For the BTEXIeIaN mixture, initial concentrations were between 1 and 5 mg L-1, and all compounds were completely degraded by the microbial consortia within 39 days of incubation. The experimental data were fitted to a first order kinetic degradation model for interpretation of inhibition/stimulation between the compounds. Results showed that indene, indane, and naphthalene inhibited the degradation of benzene, toluene, ethylbenzene, o-xylene, with benzene being the most affected. M/p-xylene is the only compound whose biodegradation is stimulated by the presence of indene and indane (individually or mixed) but inhibited by the presence of naphthalene. 16S rRNA amplicon sequencing revealed differentiation in the microbial communities within the batches with different substrate mixtures, especially within the two microbial groups Micrococcaceae and Commamonaceae. Indene had more effect on the BTEX microbial community than indane or naphthalene and the presence of indene increased the relative abundance of Micrococcaceae family. In conclusion, co-presence of various pollutants leads to differentiation in degradation processes as well as in microbial community development. This sheds some light on the underlying reasons for that organic compounds present in mixtures in the subsurface of former gasworks sites are either recalcitrant or subjective towards biodegradation, and this understanding helps to further improve the bioremediation of such sites.

Influence of redox condition and inoculum on micropollutant biodegradation by soil and activated sludge communities

Micropollutant biodegradation is selected by the interplay among environmental conditions and microbial community composition. This study investigated how different electron acceptors, and different inocula with varying microbial diversity, pre-exposed to distinct redox conditions and micropollutants, affect micropollutant biodegradation. Four tested inocula comprised of agricultural soil (Soil), sediment from a ditch in an agricultural field (Ditch), activated sludge from a municipal WWTP (Mun AS), and activated sludge from an industrial WWTP (Ind AS). Removal of 16 micropollutants was investigated for each inoculum under aerobic, nitrate reducing, iron reducing, sulfate reducing, and methanogenic conditions. Micropollutant biodegradation was highest under aerobic conditions with removal of 12 micropollutants. Most micropollutants were biodegraded by Soil (n = 11) and Mun AS inocula (n = 10). A positive correlation was observed between inoculum community richness and the number of different micropollutants a microbial community initially degraded. The redox conditions to which a microbial community had been exposed appeared to positively affect micropollutant biodegradation performance more than pre-exposure to micropollutants. Additionally, depletion of the organic carbon present in the inocula resulted in lower micropollutant biodegradation and overall microbial activities, suggesting that i) an additional carbon source is needed to promote micropollutant biodegradation; and ii) overall microbial activity can be a good indirect indicator for micropollutant biodegradation activity. These results could help to develop novel micropollutant removal strategies.

Key constructed wetland design features for maximized micropollutant removal from treated municipal wastewater: A literature study based on 16 indicator micropollutants

The removal of micropollutants from wastewater by constructed wetlands (CWs) has been extensively studied and reviewed over the past years. However, most studies do not specifically focus on the removal of micropollutants from the effluent of conventional wastewater treatment plants (WWTP) that still contains micropollutants, but on the removal of micropollutants from raw wastewater. Raw wastewater has a significantly different composition compared to WWTP effluent, which positively or negatively affects micropollutant removal mechanisms. To determine the optimal CW design for post-treatment of WWTP effluent to achieve additional micropollutant removal, this review analyzes the removal of 16 Dutch indicator micropollutants for post-treatment technology evaluation from WWTP effluent by different types of CWs. It was concluded that CW systems with organic enhanced adsorption substrates reach the highest micropollutant removal efficiency as a result of adsorption, but that the longevity of the enhanced adsorption effect is not known in the systems studied until now. Aerobic biodegradation and photodegradation are other relevant removal mechanisms for the studied micropollutants. However, a current knowledge gap is whether active aeration to stimulate the aerobic micropollutant biodegradation results in an increased micropollutant removal from WWTP effluent. Further knowledge gaps that impede the wider application of CW systems for micropollutant removal from WWTP effluent and allow a fair comparison with other post-treatment technologies for enhanced micropollutant removal, such as ozonation and activated carbon adsorption, relate to i) saturation of enhanced adsorption substrate; ii) the analysis of transformation products and biological effects; iii) insights in the relationship between microbial community composition and micropollutant biodegradation; iv) plant uptake and in-plant degradation of micropollutants; v) establishing design rules for appropriate hydraulic loading rates and/or hydraulic retention times for CWs dedicated to micropollutant removal from WWTP effluent; and vi) the energy- and carbon footprint of different CW systems. This review finishes with detailed suggestions for future research directions that provide answers to these knowledge gaps.

Role of Soil Biofilms in Clogging and Fate of Pharmaceuticals: A Laboratory-Scale Column Experiment

Contamination of groundwater with pharmaceutical active compounds (PhACs) increased over the last decades. Potential pathways of PhACs to groundwater include techniques such as irrigation, managed aquifer recharge, or bank filtration as well as natural processes such as losing streams of PhACs-loaded source waters. Usually, these systems are characterized by redox-active zones, where microorganisms grow and become immobilized by the formation of biofilms, structures that colonize the pore space and decrease the infiltration capacities, a phenomenon known as bioclogging. The goal of this work is to gain a deeper understanding of the influence of soil biofilms on hydraulic conductivity reduction and the fate of PhACs in the subsurface. For this purpose, we selected three PhACs with different physicochemical properties (carbamazepine, diclofenac, and metoprolol) and performed batch and column experiments using a natural soil, as it is and with the organic matter removed, under different biological conditions. We observed enhanced sorption and biodegradation for all PhACs in the system with higher biological activity. Bioclogging was more prevalent in the absence of organic matter. Our results differ from works using artificial porous media and thus reveal the importance of utilizing natural soils with organic matter in studies designed to assess the role of soil biofilms in bioclogging and the fate of PhACs in soils.

Analysis on the attenuation characteristics of PPCPs in surface water and their influencing factors based on a compilation of literature data

The attenuation characteristics of PPCPs play an important part in predicting their environmental concentrations. However, considerable uncertainty remains in reported laboratory data on the attenuation characteristics of PPCPs. In this analysis, we compile information on laboratory-observed photodegradation half-lives (t1/2), biodegradation t1/2, the organic carbon normalized adsorption constant (KOC) and field-observed overall attenuation t1/2 for PPCPs in water bodies from more than 200 peer-reviewed studies. To mitigate the effects of such uncertainty, we derive representative values (RV) for PPCP degradability from these records to better compare the characteristics of different PPCPs. We further examine the influence of experimental conditions and environmental drivers on the determination of t1/2 using difference analysis and correlation analysis. The results indicate that for laboratory photodegradation tests, different light sources, initial concentration and volume significantly affect t1/2, whereas there is no significant difference between values obtained from tests conducted in pure water and natural water. For biodegradation, laboratory-measured t1/2 values in batch, flume and column studies gradually decrease, marking the controlling role of experimental setup. Redox condition, initial concentration and volume are also recognized as important influencing factors. For adsorption, water-sediment ratio is the primary reaction parameter. As two frequently investigated factors, however, pH and temperature are not significant factors in almost all cases. In field observations, the persistence of carbamazepine, typically used as a tracer, is in doubt. Water depth and latitude are the most correlated drivers of t1/2, indicating the predominant status of photodegradation in the overall attenuation rates. These findings call for caution when selecting experimental parameters and environmental drivers in determining PPCP's attenuation rates and establishing PPCP fate models in the field.

Modelling and prediction of the effect of operational parameters on the fate of contaminants of emerging concern in WWTPs

Wastewater treatment plants (WWTPs) provide a barrier against the discharge of contaminants of emerging concern (CECs) into the environment. The removal of CECs is highly WWTP-specific and the underlying mechanisms are still poorly understood, hampering the optimization of biological treatment steps for their removal. To fill this knowledge gap, we assessed the influence of four operational parameters of activated sludge biological treatment, namely total suspended solids, temperature, pH and redox conditions, on the sorption and biodegradation of four CECs under controlled laboratory conditions. Design of Experiments was used to better address the factors influencing CECs removal and interactions among operational parameters. The derived statistical models showed results in concordance with previous studies and indicated how sorption and biodegradation of the investigated CECs depend on most tested parameters and few of their interactions. The predictions of the developed models have been compared with literature values, indicating how the tested parameters are responsible for most of the variability of sorption, while they could not reliably generalize biodegradation rates. The developed models were also implemented as an extension of a mechanistic biological treatment model, successfully describing the dynamic behaviour of a large-scale WWTP, which was observed during a three-day continuous monitoring campaign. Compared to a traditional modelling approach, the one including the developed models showed on average almost a three-fold uncertainty reduction, favouring its use to aid WWTP managers and regulators for improved assessment of CEC fate and removal. Finally, the models highlighted that, while higher temperatures and solids concentrations generically favoured CECs removal, removal efficiency vary significantly due to operational parameters and no globally optimum conditions for CECs removal exist. The use of these models opens the door to the combined dynamic management of both traditional contaminants and CECs in WWTPs.

Pharmaceutical Biotransformation is Influenced by Photosynthesis and Microbial Nitrogen Cycling in a Benthic Wetland Biomat

In shallow, open-water engineered wetlands, design parameters select for a photosynthetic microbial biomat capable of robust pharmaceutical biotransformation, yet the contributions of specific microbial processes remain unclear. Here, we combined genome-resolved metatranscriptomics and oxygen profiling of a field-scale biomat to inform laboratory inhibition microcosms amended with a suite of pharmaceuticals. Our analyses revealed a dynamic surficial layer harboring oxic-anoxic cycling and simultaneous photosynthetic, nitrifying, and denitrifying microbial transcription spanning nine bacterial phyla, with unbinned eukaryotic scaffolds suggesting a dominance of diatoms. In the laboratory, photosynthesis, nitrification, and denitrification were broadly decoupled by incubating oxic and anoxic microcosms in the presence and absence of light and nitrogen cycling enzyme inhibitors. Through combining microcosm inhibition data with field-scale metagenomics, we inferred microbial clades responsible for biotransformation associated with membrane-bound nitrate reductase activity (emtricitabine, trimethoprim, and atenolol), nitrous oxide reduction (trimethoprim), ammonium oxidation (trimethoprim and emtricitabine), and photosynthesis (metoprolol). Monitoring of transformation products of atenolol and emtricitabine confirmed that inhibition was specific to biotransformation and highlighted the value of oscillating redox environments for the further transformation of atenolol acid. Our findings shed light on microbial processes contributing to pharmaceutical biotransformation in open-water wetlands with implications for similar nature-based treatment systems.

Occurrence, removal, and mass balance of contaminants of emerging concern in biological nutrient removal-based sewage treatment plants: Role of redox conditions in biotransformation and sorption

The study investigates the fate of 20 contaminants of emerging concern (CECs) in two full-scale wastewater treatment plants (WWTPs) based on the Biodenipho™ (WWTP 1) and anaerobic-anoxic-oxic (WWTP 2) processes. Samples of both the dissolved and solid phases (particulate and sludge) from all the wastewater and sludge processing-related units were studied using the mass balance approach to understand the distribution of CECs. The total mass load removal efficiency for anti-inflammatory (4), antibiotics (4), and hormones (5) was 76, 46, 93%, and 72, 38, 90% from WWTP 1 and 2, respectively. The mass load analysis showed that 8.3 kg and 6.5 kg of targeted contaminants enter the treatment plants per day while 0.35 kg and 0.32 kg are discharged along with effluent, and 1.5 g and 7.7 g (dry weight) are released through sludge in WWTP 1 and 2, respectively. Both biodegradation and sorption mechanisms depended on the redox conditions. Ammonia oxidizing conditions favoured the most for the biotransformation, followed by anaerobic and nitrate-reducing conditions. The study stresses the need for separate redox conditions for optimum removal of CECs and advanced tertiary treatment to remove recalcitrant compounds. The results help better understand the removal mechanisms of the CECs in BNR treatment.

Small-scale on-site treatment of fecal matter: comparison of treatments for resource recovery and sanitization

On-site small-scale sanitation is common in rural areas and areas without infrastructure, but the treatment of the collected fecal matter can be inefficient and is seldom directed to resource recovery. The aim of this study was to compare low-technology solutions such as composting and lactic acid fermentation (LAF) followed by vermicomposting in terms of treatment efficiency, potential human and environmental risks, and stabilization of the material for reuse in agriculture. A specific and novel focus of the study was the fate of native pharmaceutical compounds in the fecal matter. Composting, with and without the addition of biochar, was monitored by temperature and CO₂ production and compared with LAF. All treatments were run at three different ambient temperatures (7, 20, and 38°C) and followed by vermicomposting at room temperature. Materials resulting from composting and LAF were analyzed for fecal indicators, physicochemical characteristics, and residues of ten commonly used pharmaceuticals and compared to the initial substrate. Vermicomposting was used as secondary treatment and assessed by enumeration of Escherichia coli, worm density, and physicochemical characteristics. Composting at 38°C induced the highest microbial activity and resulted in better stability of the treated material, higher N content, lower numbers of fecal indicators, and less pharmaceutical compounds as compared to LAF. Even though analysis of pH after LAF suggested incomplete fermentation, E. coli cell numbers were significantly lower in all LAF treatments compared to composting at 7°C, and some of the anionic pharmaceutical compounds were detected in lower concentrations. The addition of approximately 5 vol % biochar to the composting did not yield significant differences in measured parameters. Vermicomposting further stabilized the material, and the treatments previously composted at 7°C and 20°C had the highest worm density. These results suggest that in small-scale decentralized sanitary facilities, the ambient temperatures can significantly influence the treatment and the options for safe reuse of the material.

Biostimulation is a valuable tool to assess pesticide biodegradation capacity of groundwater microorganisms

Groundwater is the main source for drinking water production globally. Groundwater unfortunately can contain micropollutants (MPs) such as pesticides and/or pesticide metabolites. Biological remediation of MPs in groundwater requires an understanding of natural biodegradation capacity and the conditions required to stimulate biodegradation activity. Thus, biostimulation experiments are a valuable tool to assess pesticide biodegradation capacity of field microorganisms. To this end, groundwater samples were collected at a drinking water abstraction aquifer at two locations, five different depths. Biodegradation of the MPs BAM, MCPP and 2,4-D was assessed in microcosms with groundwater samples, either without amendment, or amended with electron acceptor (nitrate or oxygen) and/or carbon substrate (dissolved organic carbon (DOC)). Oxygen + DOC was the most successful amendment resulting in complete biodegradation of 2,4-D in all microcosms after 42 days. DOC was most likely used as a growth substrate that enhanced co-metabolic 2,4-D degradation with oxygen as electron acceptor. Different biodegradation rates were observed per groundwater sample. Overall, microorganisms from the shallow aquifer had faster biodegradation rates than those from the deep aquifer. Higher microbial activity was also observed in terms of CO₂ production in the microcosms with shallow groundwater. Our results seem to indicate that shallow groundwater contains more active microorganisms, possibly due to their exposure to higher concentrations of both DOC and MPs. Understanding field biodegradation capacity is a key step towards developing further bioremediation-based technologies. Our results show that biostimulation has real potential as a technology for remediating MPs in aquifers in order to ensure safe drinking production.

A Review of Caffeine Adsorption Studies onto Various Types of Adsorbents

A systematic literature review of publications from 2000 to 2020 was carried out to identify research trends on adsorbent materials for the removal of caffeine from aqueous solutions. Publications were retrieved from three databases (Scopus, Web of Science, and Google Scholar). Words "adsorption AND caffeine" were examined into titles, abstracts, and keywords. A brief bibliometric analysis was performed with emphasis on the type of publication and of most cited articles. Materials for the removal of caffeine were classified according to the type of material into three main groups: organic, inorganic, and composites, each of them subdivided into different subgroups consistent with their origin or production. Tables resume for each subgroup of adsorbents the key information: specific surface area, dose, pH, maximum adsorption capacity, and isotherm models for the removal of caffeine. The highest adsorption capacities were achieved by organic adsorbents, specifically those with granular activated carbon (1961.3 mg/g) and grape stalk activated carbon (916.7 mg/g). Phenyl-phosphate-based porous organic polymer (301 mg/g), natural sandy loam sediment (221.2 mg/g), composites of MCM-48 encapsulated graphene oxide (153.8 mg/g), and organically modified clay (143.7 mg/g) showed adsorption capacities lower than those of activated carbons. In some activated carbons, a relation between the specific surface area (SSA) and the maximum adsorption capacity (Q max) was found.

Effects of pH, Temperature, Suspended Solids, and Biological Activity on Transformation of Illicit Drug and Pharmaceutical Biomarkers in Sewers

In-sewer stability of biomarkers is a critical factor for wastewater-based epidemiology, as it could affect the accuracy of the estimated prevalence of substances in the community. The spatiotemporal variations of environmental and biological conditions in sewers can influence the transformation of biomarkers. To date, the relationship between environmental variables and biomarker stability in sewers is poorly understood. Therefore, this study evaluated the transformation of common illicit drug and pharmaceutical biomarkers in laboratory sewer reactors with different levels of pH, temperature, and suspended solids. The correlations between degradation rates of 14 biomarkers, 3 controlled environmental variables (pH, temperature, and suspended solids concentration), and 3 biological activity indicators (sulfide production rate, methane production rate, and the removal rate of soluble chemical oxygen demand (SCOD)) were assessed using correlation matrix, stepwise regression method, and principal component analysis. The consistent results affirmed the dominant effects of biological activities and pH on biomarker transformation in sewers, particularly for labile compounds, whereas the impact of temperature or suspended solids was less significant. This study enhances the understanding of factors affecting the fate of micropollutants in sewer systems and facilitates the interpretation of WBE results for assessing drug use and public health in communities.

Comparative overview of advanced oxidation processes and biological approaches for the removal pharmaceuticals

Nowadays, pharmaceuticals are the center of significant environmental research due to their complex and highly stable bioactivity, increasing concentration in the water streams and high persistence in aquatic environments. Conventional wastewater treatment techniques are generally inadequate to remove these pollutants. Aiming to tackle this issue effectively, various methods have been developed and investigated on the light of chemical, physical and biological procedures. Increasing attention has recently been paid to the advanced oxidation processes (AOPs) as efficient methods for the complete mineralization of pharmaceuticals. Their high operating costs compared to other processes, however, remain a challenge. Hence, this review summarizes the current and state of art related to AOPs, biological treatment and their effective exploitation for the degradation of various pharmaceuticals and other emerging molecules present in wastewater. The review covers the last decade with a particular focus on the previous five years. It is further envisioned that this review of advanced oxidation methods and biological treatments, discussed herein, will help readers to better understand the mechanisms and limitations of these methods for the removal of pharmaceuticals from the environment. In addition, we compared AOPs and biological treatments for the disposal of pharmaceuticals from the point of view of cost, effectiveness, and popularity of their use. The exploitation of coupling AOPs and biological procedures for the degradation of pharmaceuticals in wastewater was also presented. It is worthy of note that an integrated AOPs/biological system is essential to reach the complete degradation of pharmaceuticals; other advantages of this hybrid technique involve low energy cost, an efficient degradation process and generation of non-toxic by-products.

Managed aquifer recharge implementation criteria to achieve water sustainability

Depletion of groundwater is accelerated due to an increase in water demand for applications in urbanized areas, agriculture sectors, and energy extraction, and dwindling surface water during changing climate. Managed aquifer recharge (MAR) is one of the several methods that can help achieve long-term water sustainability by increasing the natural recharge of groundwater reservoirs with water from non-traditional supplies such as excess surface water, stormwater, and treated wastewater. Despite the multiple benefits of MAR, the wide-scale implementation of MAR is lacking, partly because of challenges to select the location for MAR implementation and identify the MAR type based on site conditions and needs. In this review, we provide an overview of MAR types with a basic framework to select and implement specific MAR at a site based on water availability and quality, land use, source type, soil, and aquifer properties. Our analysis of 1127 MAR projects shows that MAR has been predominantly implemented in sites with sandy clay loam soil (soil group C) and with access to river water for recharge. Spatial analysis reveals that many regions with depleting water storage have opportunities to implement MAR projects. Analyzing data from 34 studies where stormwater was used for recharge, we show that MAR can remove dissolved organic carbon, most metals, E. coli but not efficient at removing most trace organics, and enterococci. Removal efficiency depends on the type of MAR. In the end, we highlight potential challenges for implementing MAR at a site and additional benefits such as minimizing land subsidence, flood risk, augmenting low dry-season flow, and minimizing salt-water intrusion. These results could help identify locations in the water-stressed regions to implement specific MAR for water sustainability.

Occurrence, sources and fate of pharmaceuticals and personal care products and artificial sweeteners in groundwater

Groundwater is considered as the main source for supplying the public drinking water in many countries and regions; however, pharmaceuticals and personal care products (PPCPs) and artificial sweeteners (ASs) found in groundwater can exert harmful effects on human health and aquatic ecosystems, and therefore, they are of persistent concern. The recent data on the occurrence of a series of PPCPs (including antibiotics, excitants and lipid regulators) and ASs often detected in groundwater are reviewed, in which the PPCPs and ASs occur in groundwater at the concentration from several nanograms to several micrograms per litre. In addition, the spatio-temporal distribution characteristics of PPCPs and ASs are discussed and the main sources and possibly pollution pathways of PPCPs and ASs in groundwater are summarised and analysed. Additionally, the adsorption, migration and degradation of PPCPs and ASs in underground environments are evaluated. Due to the long residence time in groundwater, pollutants are likely to threaten the freshwater body for decades under certain conditions. Therefore, according to the current level of pollution, it is necessary to improve and enhance the supervision on PPCP and AS pollutants and prevent and control groundwater pollution.

Sorption and biodegradation parameters of selected pharmaceuticals in laboratory column experiments

Pharmaceutically active compounds have increasingly been detected in groundwater worldwide. Despite constituting a risk for human health and ecosystems, their fate in the environment has still not been exhaustively investigated. This study characterizes the transport behavior of five selected pharmaceutically active compounds (antipyrine, atenolol, caffeine, carbamazepine and sulfamethoxazole) in two sediments (coarse quartz sand and sandy loam) using column experiments with long-term injection of spiked groundwater. Transport parameters were estimated using an analytical reactive transport model. When five selected compounds were injected simultaneously, transport behavior of antipyrine, carbamazepine and the antibiotic sulfamethoxazole were similar to the conservative tracer in both sediments and under varying redox conditions. Atenolol and caffeine were retarded significantly stronger in the sandy loam sediment than in the coarse quartz sand. Biodegradation of caffeine was observed in both sediments after an adaption period and depended on dissolved oxygen. The identification of biodegradation processes was supported by monitoring of intracellular adenosine triphosphate (ATP_itc) as a measure for microbial activity. ATP_itc was present in varying concentrations in all sediments and was highest when biodegradation of pharmaceuticals, especially caffeine, was observed. When only caffeine and sulfamethoxazole were injected simultaneously, sulfamethoxazole was degraded while caffeine degradation was reduced. The latter seemed to be influenced by low concentrations in dissolved oxygen rather than the presence of the antibiotic sulfamethoxazole. Results of these experiments emphasize the impact on pharmaceutical sorption and (bio)degradation of sediment type and redox conditions, as well as available time for microbial adaption and the combination of pharmaceuticals that are released together into groundwater.

Transformation of Illicit Drugs and Pharmaceuticals in Sewer Sediments

In-sewer stability of human excreted biomarkers is a critical factor of wastewater-based epidemiology in back-estimating illicit drug and pharmaceutical use in the community. Biomarker stability has been investigated in sewers with the presence of biofilms, but the understanding in sewer sediments is still lacking. This study for the first time employed a laboratory sediment reactor to measure 18 illicit drug and pharmaceutical biomarkers under gravity sewer environments with the presence of sediments. Biomarkers exhibited various stability patterns due to transformation processes occurring in the bulk wastewater and sediments. The attenuation of a biomarker by sediments is driven by complex processes involving biodegradation, diffusion, and sorption, which is directly proportional to the ratio of sediment surface area against wastewater volume. The sediment-driven transformation coefficients of biomarkers are higher than the accordingly biofilm-mediated rates because of stronger microbial activities in sediments. Additionally, the stability of most biomarkers was insensitive to the natural pH variation in sewers, except for a few compounds (e.g., methadone, ketamine, and paracetamol) susceptible to pH changes. In general, this study delineates the stability data of various biomarkers in gravity sewers with sediments, which are novel and long-missing information for wastewater-based epidemiology and improve the reliability of back-estimation in complex sewer networks.

Anaerobic biodegradation of pharmaceutical compounds coupled to dissimilatory manganese (IV) or iron (III) reduction

Pharmaceuticals in water have adverse effects on aquatic environment. Anaerobic pharmaceutical biodegradation coupled to dissimilatory manganese(Mn) (IV)- or iron(Fe) (III)-oxides reduction is potentially efficient but unexplored. In this study, batch experiments were performed using different Mn(IV) and Fe(III) species with a microbial inoculum pre-cultivated with 15 mM chemically-synthesized Mn(IV) and 10 mg L^-1 metoprolol. Results show 26% caffeine and 52% naproxen are degraded with Mn(IV) as terminal electron acceptor and insignificant biodegradation for other pharmaceuticals tested. Reduction of Mn(IV) from drinking water treatment is coupled to anaerobic biodegradation of metoprolol and propranolol, resulting in removal efficiencies of 96% and 31%, respectively. The results indicate that adsorption contributes to the pharmaceutical removal during the first 10 days of incubation, while biodegradation is the main removal mechanism in the whole period. Fe(III) can also be used as electron acceptor in anaerobic pharmaceutical biodegradation. Over half of the added metoprolol is degraded with both chemically-synthesized Fe(III) and Fe(III)-citrate as terminal electron acceptors. However, this process did not occur when using Fe(III) from drinking water treatment or Fe(III)-based sorbents. This study indicates that anaerobic pharmaceutical biodegradation coupled to dissimilatory Mn(IV) or Fe(III) reduction is possible, and promising for application to cleaning wastewater treatment plant effluents.

Non-target screening reveals the mechanisms responsible for the antagonistic inhibiting effect of the biocides DBNPA and glutaraldehyde on benzoic acid biodegradation

The desalination and reuse of discharged cooling tower water (CTW) as feed water for the cooling tower could lower the industrial fresh water withdrawal. A potential pre-treatment method before CTW desalination is the use of constructed wetlands (CWs). Biodegradation is an important removal mechanism in CWs. In the present study, the impact of the biocides 2,2-dibromo-2-cyanoacetamide (DBNPA) and glutaraldehyde on the biodegradation process by CW microorganisms was quantified in batch experiments in which benzoic acid was incubated with realistic CTW biocide concentrations. DBNPA had a stronger negative impact on the biodegradation than glutaraldehyde. The combination of DBNPA and glutaraldehyde had a lower impact on the biodegradation than DBNPA alone. UHPLC-qTOF-MS/MS non-target screening combined with data-analysis script 'patRoon' revealed two mechanisms behind this low impact. Firstly, the presence of glutaraldehyde resulted in increased DBNPA transformation to the less toxic transformation product 2-bromo-2-cyanoacetamide (MBNPA) and newly discovered 2,2-dibromopropanediamide. Secondly, the interaction between glutaraldehyde and DBNPA resulted in the formation of new products that were less toxic than DBNPA. The environmental fate and toxicity of these products are still unknown. Nevertheless, their formation can have important implications for the simultaneous use of the biocides DBNPA and glutaraldehyde for a wide array of applications.

Occurrence and treatment of contaminants of emerging concern in the African aquatic environment: Literature review and a look ahead

Awareness about the rising detection and reported (eco)toxicological effects of contaminants of emerging concern (CECs, e.g. pharmaceuticals and personal care products - PPCPs - and modern pesticides) in the aquatic environment is growing. CECs are increasingly reported in the African aquatic environment, although the amount of data available is still limited. In this work, a comprehensive review is presented on the occurrence of CECs in wastewater, sludge, surface water, sediment, groundwater and drinking water of Africa. Further attention is given to the performance of wastewater stabilization ponds (WSPs) and trickling filters (TF) with respect to CECs removal. For the first time, we also look at the state of knowledge on the performance of point-of-use technologies (POUs) regarding the removal of CECs in drinking water. Generally, CECs in Africa occur at the same order of magnitude as in the Western world. However, for particular groups of compounds and at specific locations such as informal settlements, clearly higher concentrations are reported in Africa. Whereas antiretroviral and antimalarial drugs are rarely detected in the Western world, occurrence patterns in Africa reveal concentrations up to >100 μg L^-1. Removal efficiencies of WSPs and TFs focus mainly on PPCPs and vary significantly, ranging from no removal (e.g. carbamazepine) to better than 99.9% (e.g. paracetamol). Despite the rising adoption of POUs, limited but promising information is available on their performance regarding CECs treatment in drinking water, particularly for the low-cost devices (e.g. ceramic filters and solar disinfection - SODIS) being adopted in Africa and other developing countries.

Using recirculating flumes and a response surface model to investigate the role of hyporheic exchange and bacterial diversity on micropollutant half-lives

Enhancing the understanding of the fate of wastewater-derived organic micropollutants in rivers is crucial to improve risk assessment, regulatory decision making and river management. Hyporheic exchange and sediment bacterial diversity are two factors gaining increasing importance as drivers for micropollutant degradation, but are complex to study in field experiments and usually ignored in laboratory tests aimed to estimate environmental half-lives. Flume mesocosms are useful to investigate micropollutant degradation processes, bridging the gap between the field and batch experiments. However, few studies have used flumes in this context. We present a novel experimental setup using 20 recirculating flumes and a response surface model to study the influence of hyporheic exchange and sediment bacterial diversity on half-lives of the anti-epileptic drug carbamazepine (CBZ) and the artificial sweetener acesulfame (ACS). The effect of bedform-induced hyporheic exchange was tested by three treatment levels differing in number of bedforms (0, 3 and 6). Three levels of sediment bacterial diversity were obtained by diluting sediment from the River Erpe in Berlin, Germany, with sand (1 : 10, 1 : 1000 and 1 : 100 000). Our results show that ACS half-lives were significantly influenced by sediment dilution and number of bedforms. Half-lives of CBZ were higher than ACS, and were significantly affected only by the sediment dilution variable, and thus by bacterial diversity. Our results show that (1) the flume-setup is a useful tool to study the fate of micropollutants in rivers, and that (2) higher hyporheic exchange and bacterial diversity in the sediment can increase the degradation of micropollutants in rivers.

Sorption-desorption behavior of sulfamethoxazole, carbamazepine, bisphenol A and 17α-ethinylestradiol in sewage sludge

The occurrence of trace organic contaminants (TOrCs) at detectable levels in wastewater and surface waters led to a growing concern over the persistence of toxicological effects in the environment. Sorption is significant process in municipal wastewater treatment plants to remove TOrCs due to low water solubility and high hydrophobic of most TOrCs. The work herein explored the sorption behavior of four typical TOrCs onto sludge solids. The sorption process was spontaneous and exothermic. Greater sorption amount was observed for EE2 that 60.9% of EE2 in liquid phase was removed, followed by BPA (49.4%) and SMX (35.8%), while only 19.5% of CBZ was adsorbed. Sorption of CBZ, BPA and EE2 was primarily a physical process dominated by partition function, while SMX was mainly sorbed through multiple interactions, and this strong affinity between SMX and activated sludge resulted in least desorption rate. Deep insight into the pathway of SMX in SBR revealed that total removal rate in a period was about 50.22%. Sorption process was observed in anaerobic stage, and biological degradation was mainly occurred in aerobic stage with biodegradation rate of 29.18%.

Sorption and Degradation Potential of Pharmaceuticals in Sediments from a Stormwater Retention Pond

Stormwater retention ponds commonly receive some wastewater through misconnections, sewer leaks, and sewer overloads, all of which leads to unintended loads of organic micropollutants, including pharmaceuticals. This study explores the role of pond sediment in removing pharmaceuticals (naproxen, carbamazepine, sulfamethoxazole, furosemide, and fenofibrate). It quantifies their sorption potential to the sediments and how it depends on pH. Then it addresses the degradability of the pharmaceuticals in microcosms holding sediment beds and pond water. The sediment-water partitioning coefficient of fenofibrate varied little with pH and was the highest (average log Kd: 4.42 L kg−1). Sulfamethoxazole had the lowest (average log Kd: 0.80 L kg−1), varying unsystematically with pH. The coefficients of naproxen, furosemide and carbamazepine were in between. The degradation by the sediments was most pronounced for sulfamethoxazole, followed by naproxen, fenofibrate, furosemide, and carbamazepine. The first three were all removed from the water phase with half-life of 2–8 days. Over the 38 days the experiment lasted, they were all degraded to near completion. The latter two were more resistant, with half-lives between 1 and 2 months. Overall, the study indicated that stormwater retention ponds have the potential to remove some but not all pharmaceuticals contained in wastewater contributions.

Transport of platinum-based pharmaceuticals in water-saturated sand and natural soil: Carboplatin and cisplatin species

This study reports the transport characteristics of the pharmaceutical compounds carboplatin and cisplatin, and their respective derivatives, in saturated sand and soil columns. Pharmaceuticals are recognized as emerging pollutants of soil and water resources, but studies of the transport characteristics of organometallic pharmaceuticals in soil-water environments are rare. A recent study of oxaliplatin transport in natural soil raises the question of whether or not its behavior is representative of all Pt-based pharmaceuticals behavior in soil-water systems. To address this question, transport behaviors of carboplatin and cisplatin species were studied individually in packed sand columns under unamended conditions, and in packed soil columns under unamended and acetate-amended conditions. In contrast to oxaliplatin, carboplatin species exhibited very low affinity to both sand and soil surfaces: the retention of injected carboplatin was 3% and <6% for sand and soil, respectively. The affinity to soil was practically the same under the different redox conditions. The affinity of carboplatin to sand and soil surfaces was much smaller than the reported oxaliplatin affinity and the values reported in the literature. Cisplatin exhibited transport behavior similar to that of oxaliplatin in soil, including mild sensitivity to redox conditions (e.g., higher retention under acetate-amended conditions), overall exhibiting retention of 64-70% of the injected species. However, cisplatin also exhibited a similar retention in sand (retention of 45-53%), unlike the cases of carboplatin and oxaliplatin. The results indicate that similarly structured pharmaceuticals can exhibit very different transport characteristic in natural soil-water environments, and should therefore be studied and assessed individually.

An innovative wastewater treatment technology based on UASB and IFAS for cost-efficient macro and micropollutant removal

An innovative process based on the combination of a UASB reactor and an IFAS system is proposed in order to combine different redox conditions and biomass conformations to promote a high microbial diversity. The objective of this configuration is to enhance the biological removal of organic micropollutants (OMPs) as well as to achieve the abatement of nitrogen by using the dissolved methane as an inexpensive electron donor. Results showed high removals of COD (93%) and dissolved methane present in the UASB effluent (up to 85%) was biodegraded by a consortium of aerobic methanotrophs and heterotrophic denitrifiers. Total nitrogen removal decreased slightly along the operation (from 44 to 33%), depending on the availability of electron donor, biomass concentration, and configuration (floccules and biofilm). A high removal was achieved in the hybrid system (>80%) for 6 of the studied OMPs. Sulfamethoxazole, trimethoprim, naproxen, and estradiol were readily biotransformed under anaerobic conditions, whereas ibuprofen or bisphenol A were removed in the anoxic-aerobic compartment. Evidence of the cometabolic biotransformation of OMPs has been found, such as the influence of nitrification activity on the removal of bisphenol A, and of the denitrification activity on ethinylestradiol removal.

Biological regeneration of manganese (IV) and iron (III) for anaerobic metal oxide-mediated removal of pharmaceuticals from water

Applying manganese(IV)- or iron(III)-(hydr)oxides to remove pharmaceuticals from water could be attractive, due to the capacity of these metal oxides to remove pharmaceuticals and be regenerated. As pharmaceutical removal under anaerobic conditions is foreseen, Mn(IV) or Fe(III) regeneration under anaerobic conditions, or with minimum oxygen dosage, is preferred. In this study, batch experiments are performed to investigate (1) Mn(IV) and Fe(III) regeneration from Mn(II) and Fe(II); (2) the pharmaceutical removal during biological Mn(IV) and Fe(III) regeneration; and (3) anaerobic abiotic pharmaceutical removal with different Mn(IV) or Fe(III) species. Results show that biological re-oxidation of reduced Mn(II) to Mn(IV) occurs under oxygen-limiting conditions. Biological re-oxidation of Fe(II) to Fe(III) is obtained with nitrate under anaerobic conditions. Both bio-regenerated Mn(IV)-oxides and Fe(III)-hydroxides are amorphous. The pharmaceutical removal is insignificant by Mn(II)- or Fe(II)-oxidizing bacteria during regeneration. Finally, pharmaceutical removal is investigated with various Mn(IV) and Fe(III) sources. Anaerobic abiotic removal using Mn(IV) produced from drinking water treatment plants results in 23% metoprolol and 44% propranolol removal, similar to chemically synthesized Mn(IV). In contrast, Fe(III) from drinking water treatment plants outperformed chemically or biologically synthesized Fe(III); Fe (III) from drinking water treatment can remove 31-43% of propranolol via anaerobic abiotic process. In addition, one of the Fe(III)-based sorbents tested, FerroSorp^®RW, can also remove propranolol (20-25%). Biological regeneration of Mn(IV) and Fe(III) from the reduced species Mn(II) and Fe(II) could be more effective in terms of cost and treatment efficiency.

Transport of oxaliplatin species in water-saturated natural soil

This study reports the transport characteristics of the organometallic anticancer compound oxaliplatin and its derivatives in natural soil-water environments. Although pharmaceuticals and their derivatives have for many years been detected in water resources, and linked to toxicological impacts on ecological systems, their transport in soil and groundwater is not fully understood. Specifically, studies that describe transport of organometallic pharmaceuticals in porous media are rare, and the transport characteristics of platinum complexes have received little attention. Oxaliplatin transport was studied in sand, as a function of two added natural chelators (citrate and humic acid), and in soil, under four continuously monitored, environmentally-relevant redox conditions: oxic, nitrate reducing, iron reducing and methanogenic. In sand, oxaliplatin species retention was about 7%, and affected only mildly by added citrate, and by humic acid under buffered pH. Transport with unbuffered humic acid was affected significantly by pH variations, and exhibited strong retention at pH < 8. In soil, unexpectedly similar breakthrough patterns of oxaliplatin species were found for all redox conditions, exhibiting linear, reversible retention of 79-87%. The strongest retention was observed under iron reducing conditions, whereas the weakest retention was under oxic conditions. Increased cation activity appears to promote weaker sorption. The results indicate that soil composition is the leading factor affecting oxaliplatin species mobility and fate in the soil-water environment, followed by the weaker factors of redox conditions and cation activities.

Fate and distribution of pharmaceutically active compounds in mesocosm constructed wetlands

Removal of pharmaceutically active compounds (PhACs) in constructed wetlands (CWs) is a complex interplay of different processes. We studied fate and distribution of seven PhACs (caffeine, CAF; naproxen, NAP; metoprolol, MET; propranolol, PRO; ibuprofen, IBP; carbamazepine, CBZ; diclofenac, DFC) in mesocosm CWs and effects of irradiation via pre-photocatalysis, substrate composition (mainly sediment) through addition of litter (dead plant biomass), and plants. CWs showed high removal of CAF, NAP, MET, PRO, and IBP (79-99%). All seven PhACs were detected in substrate and plant tissues as well as IBP intermediates. Estimated PhAC mass balance showed that sorption dominated PRO removal in CWs while other PhACs were mainly removed by biodegradation and/or phytodegradation. Pre-photocatalysis significantly increased removal of PhACs except for CAF and IBP, and decreased accumulation of PhACs in substrate and plant tissues of the following wetland compartment. Litter addition in CW significantly enhanced removal of PRO and CBZ via biodegradation and/or phytodegradation. Plants played an essential and positive role in removing PhACs, resulting from direct phytoremediation and indirectly enhancing sorption and biodegradation. Our study provides knowledge to understand removal mechanisms of PhACs in CWs and to potentially enhance PhAC removal by developing pre-photocatalysis, adding dead plant biomass, and optimizing vegetation.

Evaluation of attenuation of pharmaceuticals, toxic potency, and antibiotic resistance genes in constructed wetlands treating wastewater effluents

The performance of constructed wetlands (CWs) in the removal of pharmaceutically active compounds (PhACs) is generally evaluated on the basis of chemical analysis. In this work, we used a combination of chemical, toxicological, and molecular analyses to assess the attenuation of PhACs, toxic potency and antibiotic resistance genes (ARGs) in a field study of three CWs serving as tertiary treatment of wastewater treatment plants. First, 17 PhACs were analysed chemically, of which 14 were detected and seven at concentrations >0.1μg/l. Even though some of the individual PhACs were moderately or highly removed in the CWs investigated, median removal of overall PhACs was approximately 50% in the vertical subsurface flow CW (VSF-CW) with a lower hydraulic loading rate while the removal in the other two free water surface flow CWs (SF-CWs) was negligible. Second, toxic potency of wastewater extracts was assessed in a range of bioassays. Estrogenicity was overall attenuated in CWs, while the neurotoxic potency of wastewater extracts did not decrease after passage through the two CWs investigated. Third, the VSF-CW and one of the SF-CW showed a positive removal of an integrase gene and three ARGs tested. The increased concentrations of ARGs in the other SF-CW, as well as the increase of total bacteria in all CWs, may relate to regrowth of resistance-carrying bacteria. Finally, multivariate analysis shows that most PhACs are positively correlated to the observed toxic potency. Additionally, low removal of organics and nutrients seems to parallel with low removal of PhACs. ARGs positively correlated with organics, nutrients and some PhACs, and the integrase gene but not to the respective antibiotics. The insufficient removal of PhACs, toxic potency, and ARGs indicates the need of an optimal design of CWs as tertiary treatment facilities.

Effects of dissolved organic matter and nitrification on biodegradation of pharmaceuticals in aerobic enrichment cultures

Natural dissolved organic matter (DOM) and nitrification can play an important role in biodegradation of pharmaceutically active compounds (PhACs) in aerobic zones of constructed wetlands (CWs). This study used an enrichment culture originating from CW sediment to study the effect of DOM and nitrification on aerobic biodegradation of seven PhACs. The enriched culture degraded caffeine (CAF), metoprolol (MET), naproxen (NAP), and ibuprofen (IBP) with a consistent biodegradability order of CAF>MET>NAP>IBP. Biodegradation of propranolol, carbamazepine, and diclofenac was insignificant (<15%). CAF biodegradation was inhibited by the easily biodegradable DOM. Conversely, DOM enhanced biodegradation of MET, NAP, and IBP, potentially by contributing more biomass capable of degrading PhACs. Nitrification enhanced biodegradation of NAP and IBP and mineralization of the PhAC mixture as well as less biodegradable DOM, which may result from co-metabolism of ammonia oxidizing bacteria or enhanced heterotrophic microbial activity under nitrification. MET biodegradation was inhibited in the presence of nitrification. DOM and nitrification effects on PhAC biodegradation in CWs gained from this study can be used in strategies to improve CW operation, namely: designing hydraulic retention times based on the biodegradability order of specific PhACs; applying DOM amendment; and introducing consistent ammonium streams to increase removal of PhACs of interest.

Enhanced pharmaceutical removal from water in a three step bio-ozone-bio process

Individual treatment processes like biological treatment or ozonation have their limitations for the removal of pharmaceuticals from secondary clarified effluents with high organic matter concentrations (i.e. 17 mg TOC/L). These limitations can be overcome by combining these two processes for a cost-effective pharmaceutical removal. A three-step biological-ozone-biological (BO₃B) treatment process was therefore designed for the enhanced pharmaceutical removal from wastewater effluent. The first biological step removed 38% of ozone scavenging TOC, thus proportionally reducing the absolute ozone input for the subsequent ozonation. Complementariness between biological and ozone treatment, i.e. targeting different pharmaceuticals, resulted in cost-effective pharmaceutical removal by the overall BO₃B process. At a low ozone dose of 0.2 g O₃/g TOC and an HRT of 1.46 h in the biological reactors, the removal of 8 out of 9 pharmaceuticals exceeded 85%, except for metoprolol (60%). Testing various ozone doses and HRTs revealed that pharmaceuticals were ineffectively removed at 0.1 g O3/g TOC and an HRT of 0.3 h. At HRTs of 0.47 and 1.46 h easily and moderately biodegradable pharmaceuticals such as caffeine, gemfibrozil, ibuprofen, naproxen and sulfamethoxazole were over 95% removed by biological treatment. The biorecalcitrant carbamazepine was completely ozonated at a dose of 0.4 g O₃/g TOC. Ozonation products are likely biodegraded in the last biological reactor as a 17% TOC removal was found. No appreciable acute toxicity towards D. magna, P. subcapitata and V. fischeri was found after exposure to the influents and effluents of the individual BO₃B reactors. The BO₃B process is estimated to increase the yearly wastewater treatment tariff per population equivalent in the Netherlands by less than 10%. Overall, the BO₃B process is a cost-effective treatment process for the removal of pharmaceuticals from secondary clarified effluents.