Simultaneous functionalization and magnetization of biochar via NH3 ambiance pyrolysis for efficient removal of Cr (VI)

Remediation of chromium contaminated water and soil by nitrogen and iron doped biochars

Chromium (Cr) is a toxic and redox-sensitive contaminant that has accumulated in water and soil systems, becoming a serious issue worldwide. Producing novel remedial materials with enhanced removal efficiency from plentiful available sources is a pleasing aspect for Cr removal. This review explores valuable insights into the production of nitrogen doped biochar (N/BC), iron doped biochar (Fe/BC), and iron‑nitrogen doped biochar (Fe-N/BC) and their application for Cr (trivalent (Cr(III)) and hexavalent (Cr(VI)) removal. Specifically, this review focuses on conferring knowledge about producing environmentally friendly N and Fe doped BCs with enhanced surface functionalities, physicochemical properties, and holding capacities for removing Cr(VI) through adsorption and reduction. Affecting factors for Cr(VI) removal by N/BC, Fe/BC, and Fe-N/BC through reviewing the literature on the reaction system pH, mass transfer driving forces, effect of coexisting ions, BC production conditions, and redox potential are overviewed. Notably, isotherm and kinetic models and removal mechanisms of Cr(VI) by N/BC, Fe/BC, and Fe-N/BC with the assistance of characterization analyses, experimental results, and computational modeling methods are explored. Finally, the regeneration, cost evaluation, and environmental implications, as well as the real-world applications and environmental risks of N/BC, Fe/BC, and Fe-N/BC are discussed. This review shows that N and Fe doped BCs are remedial materials that can potentially remediate Cr(VI) contaminated water and soil.

Effective amendment of cadmium in water and soil before and after aging of nitrogen-doped biochar: Preparation optimization, removal efficiency and mechanism

Nitrogen-doped biochar (NBC) is a green material for remediating heavy metal pollution, but it undergoes aging under natural conditions, affecting its interaction with heavy metals. The preparation conditions of NBC were optimized using response surface methodology (RSM), and NBC was subjected to five different aging treatments to analyze the removal efficiency of Cd(II) and soil remediation capability before and after aging. The results indicated that NBC achieved optimal performance with a mass ratio of 5:2.43, an immersion time of 10.66 h, and a pyrolysis temperature of 900 °C. Aging diminished NBC's adsorption capacity for Cd(II) but did not change the main removal mechanism of monolayer chemical adsorption. Freeze-thaw cycles (FT), UV aging (L), and composite aging (U) treatments increased the proportion of bioavailable-Cd, and all aging treatments facilitated the conversion of potentially bioavailable-Cd to non-bioavailable-Cd. The application of NBC and five aged NBCs reduced the proportion of bioavailable-Cd in the soil through precipitation and complexation, increasing the proportion of non-bioavailable-Cd. Aging modifies the physicochemical properties of NBC, thus influencing soil characteristics and ultimately diminishing NBC's ability to passivate Cd in the soil. This study provides reference for the long-term application of biochar in heavy metal-contaminated environments.

Comprehensive insights into the impact of magnetic biochar on protein hydrolysis in sludge anaerobic digestion: Protein structures, microbial activities and syntrophic metabolisms

The addition of composite conductive materials is being increasingly recognized as a promising strategy to enhance anaerobic digestion (AD) performance. However, the influence of these materials on protein hydrolysis has been poorly documented. Here, a novel magnetic biochar derived from oil sludge and straw was synthesized using different iron sources and successfully applied in sludge AD. Experimental results revealed that magnetic biochar modified by Fe2+ exhibited excellent electron transfer capacity, moderate magnetization, diverse functional groups (e.g. C=O, C-O=O-), and abundant iron distribution. These characteristics significantly enhanced the hydrolysis of tryptophan-like components, leading to increased methane production (144.44 mL gVS-1vs 79.72 mL gVS-1 in the control test). Molecular docking analysis revealed that the binding of magnetic biochar related Fe2+ and Fe3+, onto sludge proteins via hydrogen bond played a key role in promoting subsequent protein hydrolysis. Additionally, the noteworthy conservation of protein structures from α-helix and β-sheet to random coil, along with the breakdown of the amide I-associated C=O group and amide III-related CN and NH bonds following the addition of magnetic biochar, accelerated the degradation of sludge protein. Observation of variations in protease activity, coenzyme F420, electron transfer system (ETS), and conductivity within the AD systems, particularly the enrichment of Methanospirillum and Methanosaeta archaea, as well as the Petrimonas, Comamonas, and Syntrophomonas bacteria, suggested that magnetic biochar facilitated a conducive environment by improving hydrolysis-acidification and the direct interspecies electron transfer (DIET) process for acetoclastic methanogens. Moreover, metabolic pathways further proved that tryptophan metobalism and acetoclastic methanogenesis were both facilitated by magnetic biochar. This study provides an in-depth understanding of the impact of magnetic biochar on protein hydrolysis in sewage sludge AD.

Efficient Immobilization of heavy metals using newly synthesized magnetic nanoparticles and some bacteria in a multi-metal contaminated soil

Simultaneous application of modified Fe3O4 with biological treatments in remediating multi-metal polluted soils, has rarely been investigated. Thus, a pioneering approach towards sustainable environmental remediation strategies is crucial. In this study, we aimed to improve the efficiency of Fe3O4 as adsorbents for heavy metals (HMs) by applying protective coatings. We synthesized core-shell magnetite nanoparticles coated with modified nanocellulose, nanohydrochar, and nanobiochar, and investigated their effectiveness in conjunction with bacteria (Pseudomonas putida and Bacillus megaterium) for remediating a multi-metal contamination soil. The results showed that the coatings significantly enhanced the immobilization of heavy metals in the soil, even at low doses (0.5%). The coating of nanocellulose had the highest efficiency in stabilizing metals due to the greater variety of surface functional groups and higher specific surface area (63.86 m2 g-1) than the other two coatings. Interestingly, uncoated Fe3O4 had lower performance (113.6 m2 g-1) due to their susceptibility to deformation and oxidation. The use of bacteria as a biological treatment led to an increase in the stabilization of metals in soil. In fact, Pseudomonas putida and Bacillus megaterium increased immobilization of HMs in soil successfully because of extracellular polymeric substances and intensive negative charges. Analysis of metal concentrations in plants revealed that Ni and Zn accumulated in the roots, while Pb and Cd were transferred from the roots to the shoots. Treatment Fe3O4 coated with modified nanocellulose at rates of 0.5 and 1% along with Pseudomonas putida showed the highest effect in stabilizing metals. Application of coated Fe3O4 for in-situ immobilization of HMs in contamination soils is recommendable due to their high metal stabilization efficiency and suitability to apply in large quantities.

Efficient reduction and adsorption of Cr(VI) using FeCl3-modified biochar: Synergistic roles of persistent free radicals and Fe(II)

Transition metal iron and persistent free radicals (PFRs) both affect the redox properties of biochar, but the electron transfer relationship between them and the coupling reduction mechanism of Cr(VI) requires further investigation. To untangle the interplay between iron and PFRs in biochar and the influences on redox properties, FeCl3-modified rice husk biochar (FBCs) was prepared and its reduction mechanism for Cr(VI) without light was evaluated. The FBCs had higher surface positive charges, oxygen-containing functional groups, and PFRs compared with pristine rice husk biochar (BC). Phenoxyl PFRs with high electron-donating capability formed in biochar. The pronounced electron paramagnetic resonance signals showed that the PFRs preferred to form at lower Fe(III) concentrations. While a high concentration of Fe(III) would be reduced to Fe(II) and consumed the formed PFRs. Adsorption kinetics and X-ray photoelectron spectroscopy analysis indicated that the FBCs effectively enhanced the Cr(VI) removal efficiency by 1.54-8.20 fold and the Cr(VI) reduction efficiency by 1.88-9.29 fold compared to those of BC. PFRs quenching and competitive reductant addition experiments revealed that the higher Cr(VI) reduction performance of FBCs was mainly attributed to the formed PFRs, which could contribute to ∼74.0% of Cr(VI) reduction by direct or indirect electron transfer. The PFRs on FBCs surfaces could promote the Fe(III)/Fe(II) cycle through single electron transfer and synergistically accelerate ∼52.3% of Cr(VI) reduction. This study provides an improved understanding of the reduction mechanism of iron-modified biochar PFRs on Cr(VI) in environments.

Tuning active sites on biochars for remediation of mercury-contaminated soil: A comprehensive review

Mercury (Hg) contamination is acknowledged as a global issue and has generated concerns globally due to its toxicity and persistence. Tunable surface-active sites (SASs) are one of the key features of efficient BCs for Hg remediation, and detailed documentation of their interactions with metal ions in soil medium is essential to support the applications of functionalized BC for Hg remediation. Although a specific active site exhibits identical behavior during the adsorption process, a systematic documentation of their syntheses and interactions with various metal ions in soil medium is crucial to promote the applications of functionalized biochars in Hg remediation. Hence, we summarized the BC's impact on Hg mobility in soils and discussed the potential mechanisms and role of various SASs of BC for Hg remediation, including oxygen-, nitrogen-, sulfur-, and X (chlorine, bromine, iodine)- functional groups (FGs), surface area, pores and pH. The review also categorized synthesis routes to introduce oxygen, nitrogen, and sulfur to BC surfaces to enhance their Hg adsorptive properties. Last but not the least, the direct mechanisms (e.g., Hg- BC binding) and indirect mechanisms (i.e., BC has a significant impact on the cycling of sulfur and thus the Hg-soil binding) that can be used to explain the adverse effects of BC on plants and microorganisms, as well as other related consequences and risk reduction strategies were highlighted. The future perspective will focus on functional BC for multiple heavy metal remediation and other potential applications; hence, future work should focus on designing intelligent/artificial BC for multiple purposes.

Conversion of solid wastes and natural biomass for deciphering the valorization of biochar in pollution abatement: A review on the thermo-chemical processes

This overview addresses the formation of solid trash and the various forms of waste from a variety of industries, which environmentalists have embraced. The paper investigates the negative effects on the environment caused by unsustainable management of municipal solid trash as well as the opportunities presented by the formal system. This examination looks at the origins of solid waste as well as the typical treatment methods. Pyrolysis methods, feedstock pyrolysis, and lignocellulosic biomass pyrolysis were highlighted. Explain in detail the various thermochemical processes that take place during the pyrolysis of biomass. Due to its carbon content, low cost, accessibility, ubiquitousness, renewable nature, and environmental friendliness, biomass waste is a unique biochar precursor. This study looks at the different types of biomass waste that are available for treating wastewater. This study discussed a wide variety of reactors. Adsorption is the standard method that is used the most frequently to remove hazardous organic, dye, and inorganic pollutants from wastewater. These pollutants cause damage to the environment and water supplies, thus it is important to remove them. Adsorption is both simple and inexpensive to utilize. Temperature-dependent conversions explain the kinetic theories of biomaterial biochemical degradation. This article presents a review that explains how pyrolytic breakdown char materials can be used to reduce pollution and improve environmental management.

New insights into nitrogen control strategies in sewage sludge pyrolysis toward environmental and economic sustainability

Sewage sludge (SS) contains a certain amount of nitrogen (N), resulting in various content of N in the pyrolysis products. Investigates on how to control the generation of NH₃ and HCN (deleterious gas-N species) or convert it to N₂ and maximize transforming N in sewage sludge (SS-N) into potentially valuable N-containing products (such as char-N and/or liquid-N) are of great significance for SS management. Understanding the nitrogen migration and transformation (NMT) mechanisms in SS during the pyrolysis process is essential for investigating the aforementioned issues. Therefore, in this review, the N content and species in SS are summarized, and the influencing factors during the SS pyrolysis process (such as temperature, minerals, atmosphere, and heating rate) that affect NMT in char, gas, and liquid products are analyzed. Furthermore, N control strategies in SS pyrolysis products are proposed toward environmental and economic sustainability. Finally, the state-of-the-art of current research and future prospects are summarized, with a focus on the generation of value-added liquid-N and char-N products, while concurrently reducing NO_x emission.

Nitrogen-doped biochar (N-doped BC) and iron/nitrogen co-doped biochar (Fe/N co-doped BC) for removal of refractory organic pollutants

The presence of refractory organic pollutants (ROPs) in the ecosystem is a serious concern because of their impact on environmental constituents as well as their known or suspected ecotoxicity and adverse health effects. According to previous studies, carbonaceous materials, such as biochar (BC), have been widely used to remove pollutants from ecosystems owing to their desirable features, such as relative stability, tunable porosity, and abundant functionalities. Nitrogen (N)-doping and iron/nitrogen (Fe/N) co-doping can tailor BC properties and provide supplementary functional groups as well as extensive active sites on the N-doped and Fe/N co-doped BC surface, which is advantageous for interaction with and removal of ROPs. This review investigates the impact of N-doped and Fe/N co-doped BC on the removal of ROPs through adsorption, activation oxidation, and catalytic reduction due to the synergistic Fe, N, and BC features that modify the physicochemical properties, surface functional groups, and persistent free radicals of BC to aid in the degradation of ROPs. Owing to the attractive properties of N-doped and Fe/N co-doped BCs for the removal of ROPs, this review focuses and evaluates previous experimental investigations on the manufacturing (including precursors and influencing parameters during manufacturing) and characterizations of N-doped and Fe/N co-doped BCs. Additionally, the effective applications and mechanisms of N-doped and Fe/N co-doped BCs in adsorption, activation oxidation, and reductive remediation of ROPs are investigated herein. Moreover, the application of N-doped and Fe/N co-doped BC for progressive environmental remediation based on their effectiveness against co-pollutants, regeneration, stability, affordability, and future research prospects are discussed.

Remediation competence of nanoparticles amalgamated biochar (nanobiochar/nanocomposite) on pollutants: A review

Advanced biochar blended nanoparticles substances, such as nano biochar or nanocomposites, have provided long-term solutions to a wide range of modern-day problems. Biochar blended nano-composites can be created to create better composite materials that combine the benefits of biochar and nanoparticles. Such materials have been typically improved with active functional groups, porous structure, active surface area, catalytic deterioration ability, as well as easy recovery or separation of pollutants. Such biochar-basednanocomposites have good adsorption properties for a variety of pollutants in various form of polluted medium (soil and water contamination). Catalytic nanoparticle encapsulated biochar, can perform concurrently the adsorption (by biochar) as well as catalytic degradation (nanoparticles) functions for pollutants removal from polluted sites. In this review, the advanced and practically feasible techniques involved in the biochar blended nanoparticles-based nanocomposites have been discussed with environmental applications. Furthermore, the mechanisms involved in this composite material in remediation, as well as the advantages and disadvantages of biochar blended nanoparticles-based nanocomposites, were discussed, and future directions for study in this field were suggested.

Effect of CeO2-Reinforcement on Pb Absorption by Coconut Coir-Derived Magnetic Biochar

Magnetic separable biochar holds great promise for the treatment of Pb²⁺-contaminated wastewater. However, the absorption effect of unmodified magnetic biochar is poor. Considering this gap in knowledge, CeO₂-doped magnetic coconut coir biochar (Ce-MCB) and magnetic coconut coir biochar (MCB) for Pb²⁺ absorption were prepared by the impregnation method, and the efficiency of Ce-MCB for Pb²⁺ absorption was evaluated in comparison with MCB. Conducting the absorption experiments, the study provided theoretical support for the exploration of the absorption mechanism. The quantitative analysis exposed that the enhanced absorption capacity of Ce-MCB was attributed to the increase in oxygen-containing functional groups and mineral precipitation. The Langmuir and Freundlich isotherm model showed that Ce-MCB is a suitable adsorbent for Pb²⁺. The absorption characteristics of Ce-MCB was fit well with the pseudo-second-order (PSO) and Langmuir models, which revealed that the absorption of Pb²⁺ in water was monolayer chemisorption with a maximum theoretical adsorption capacity of 140.83 mg·g^-1. The adsorption capacity of Ce-MCB for Pb(II) was sustained above 70% after four cycles. In addition, the saturation magnetization intensity of Ce-MCB was 7.15 emu·g^-1, which was sufficient to separate out from the solution. Overall, Ce-MCB has wide application prospects in terms of biomass resources recycling and environmental conservation.

Efficient Adsorption of a Sulfonamide Antibiotic in Aqueous Solutions with N-doped Magnetic Biochar: Performance, Mechanism, and Reusability

Conventional biochar has limited effectiveness in the adsorption of sulfonamide antibiotics, while modified biochar exhibits greater adsorption potential. Residues of sulfamethoxazole (SMX) in the aquatic environment can threaten the safety of microbial populations as well as humans. In this study, iron-nitrogen co-doped modified biochar (Fe-N-BC) was prepared from palm fibers and doped with Fe and urea via synthesis at 500 °C. Fe-N-BC has a richer surface functional group based on elemental content, X-ray photoelectron spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The Brunauer-Emmett-Teller (BET) specific surface area test exhibited Fe-N-BC, which possessed a greater surface area (318.203 m²/g) and a better developed pore structure (0.149 cm³/g). The results of the hysteresis loop and the Raman spectrum show that Fe-N-BC has a higher degree of magnetization and graphitization. Fe-N-BC showed a remarkable adsorption capacity for SMX (42.9 mg/g), which could maintain 93.4% adsorption effect after four cycles, and 82.8% adsorption capacity in simulated piggery wastewater. The adsorption mechanism involves pore filling, surface complexation, electrostatic interactions, hydrogen bonding, and π-π EDA interactions. The results of this study show that Fe-N-BC prepared from palm fibers can be a stable, excellent adsorbent for SMX removal from wastewater and has promise in terms of practical applications.

Modified biochar: synthesis and mechanism for removal of environmental heavy metals

With social progress and industrial development, heavy metal pollution in water and soils environment is becoming more serious. Although biochar is a low-cost and environmentally friendly adsorbent for heavy metal ions, its adsorption and immobilization efficiency still need to be improved. As an upgraded version of biochar, modified biochar has attracted extensive attention in the scientific community. This review summarized the recent research progress on the treatment methods on heavy metal pollutants in water and soils using biochar. The features and advantages of biochar modification techniques such as physical modification, chemical modification, biological modification and other categories of biochar were discussed. The mechanism of removing heavy metals from soil and water by modified biochar was summarized. It was found that biochar had better performance after modification, which provided higher surface areas and more functional groups, and had enough binding sites to combine heavy metal ions. Biochar is a very promising candidate for removing heavy metals in environment. Furthermore, some high valent metal ions could be reduced to low valent metals, such as Cr(VI) reduction to Cr(III), and form precipitates on biochar by in-situ sorption-reduction-precipitation strategy. However, it is still the direction of efforts to develop high-efficiency modified biochar with low-cost, high sorption capacity, high photocatalytic performance, environmentally friendly and no secondary pollution in future.

One-pot synthesis of porous N-doped hydrochar for atrazine removal from aqueous phase: Co-activation and adsorption mechanisms

KOH-activated N-doped hydrochar (KHCN) was synthesized via co-activation method to eliminate atrazine (AT) in water efficiently. Compared to primitive HC, KHCN had advantages of splendid specific surface area (1205.82 m2/g) and developed microsphere structures on the surface. Specially for KHCN, the extra melamine added strengthened and preserved partial structure of polar oxygen-containing groups that were decomposed in the process of pore making. Besides, the estimated uptake amount of AT onto KHCN (216.50 mg/g) was remarkably superior to KHC (114.25 mg/g). KHCN exhibited the pH-dependence for AT removal, and presented excellent uptake capacity at a relatively neutral environment. Notably, the proposed mechanisms for AT removal by KHCN included electrostatic attraction, pore filling, π-π EDA, H-bond as well as hydrophilic effect. Hence, the porous N-doped hydrochar was a kind of adsorbent which was easy to prepare and had the application prospect for AT removal in natural water.

Fate and mechanistic insights into nanoscale zerovalent iron (nZVI) activation of sludge derived biochar reacted with Cr(VI)

While nanoscale zero-valent iron modified biochar (nZVI-BC) have been widely investigated for the removal of heavy metals, the corrosion products of nZVI and their interaction with heavy metals have not been revealed yet. In this paper, nZVI-BC was synthesized and applied for the removal of Cr(VI). Batch experiments indicated that the adsorption of Cr(VI) fit Langmuir isotherm, with the maximum removal capacity at 172.4 mg/g at pH 2.0. SEM-EDS, BET, XRD, FT-IR, Raman and XPS investigation suggested that reduction of Cr(VI) to Cr(III) was the major removal mechanism. pH played an important role on the corrosion of nZVI-BC, at pH 4.5 and 2.0, FeOOH and Fe₃O₄ were detected as the major iron oxide, respectively. Therefore, FeOOH-BC and Fe₃O₄-BC were further prepared and their interaction with Cr were studied. Combining with DFT calculations, it revealed that Fe₃O₄ has higher adsorption capacity and was responsible for the effective removal of Cr(VI) through electrostatic attraction and reduction under acidic conditions. However, Fe₃O₄ will continue to convert to the more stable FeOOH, which is the key to for the subsequent stabilization of the reduced Cr(III). The results showed that the oxide corrosion products of nZVI-BC were subjected to the environment, which will eventually affect the fate and transport of the adsorbed heavy metal.

Removal of hexavalent chromium via biochar-based adsorbents: State-of-the-art, challenges, and future perspectives

Chromium originates from geogenic and extensive anthropogenic activities and significantly impacts natural ecosystems and human health. Various methods have been applied to remove hexavalent chromium (Cr(VI)) from aquatic environmental matrices, including adsorption via different adsorbents, which is considered to be the most common and low-cost approach. Biochar materials have been recognized as renewable carbon sorbents, pyrolyzed from various biomass at different temperatures under limited/no oxygen conditions for heavy metals remediation. This review summarizes the sources, chemical speciation & toxicity of Cr(VI) ions, and raw and modified biochar applications for Cr(VI) remediation from various contaminated matrices. Mechanistic understanding of Cr(VI) adsorption using different biochar-based materials through batch and saturated column adsorption experiments is documented. Electrostatic interaction and ion exchange dominate the Cr(VI) adsorption onto the biochar materials in acidic pH media. Cr(VI) ions tend to break down as HCrO₄^-, CrO₄^2-, and Cr₂O₇^2- ions in aqueous solutions. At low pH (∼1-4), the availability of HCrO₄^- ions attributes the electrostatic forces of attraction due to the available functional groups such as -NH₄⁺, -COOH, and -OH₂⁺, which encourages higher adsorption of Cr(VI). Equilibrium isotherm, kinetic, and thermodynamic models help to understand Cr(VI)-biochar interactions and their adsorption mechanism. The adsorption studies of Cr(VI) are summarized through the fixed-bed saturated column experiments and Cr-contaminated real groundwater analysis using biochar-based sorbents for practical applicability. This review highlights the significant challenges in biochar-based material applications as green, renewable, and cost-effective adsorbents for the remediation of Cr(VI). Further recommendations and future scope for the implications of advanced novel biochar materials for Cr(VI) removal and other heavy metals are elegantly discussed.

Biochar-supported nZVI for the removal of Cr(VI) from soil and water: Advances in experimental research and engineering applications

Over the past decade, biochar-supported nZVI composites (nZVI/biochar) have been developed and applied to treat various pollutants due to their excellent physical and chemical properties, especially in the field of chromium (VI) removal. This paper reviewed the factors influencing the preparation and experiments of nZVI/biochar composites, optimization methods, column experimental studies and the mechanism of Cr(VI) removal. The results showed that the difference in raw materials and preparation temperature led to the difference in functional groups and electron transfer capabilities of nZVI/biochar materials. In the experimental process, pH and test temperature can affect the surface chemical properties of materials and involve the electron transfer efficiency. Elemental doping and microbial coupling can effectively improve the performance of nZVI/biochar composites. In conclusion, biochar can stabilize nZVI and enhance electron transfer in nZVI/biochar materials, enabling the composite materials to remove Cr(VI) efficiently. The study of column experiments provides a theoretical basis for applying nZVI/biochar composites in engineering. Finally, the future work prospects of nZVI/biochar composites for heavy metal removal are introduced, and the main challenges and further research directions are proposed.

Enhanced Ciprofloxacin Removal from Aqueous Solution Using a Chemically Modified Biochar Derived from Bamboo Sawdust: Adsorption Process Optimization with Response Surface Methodology

Contamination of water by ciprofloxacin has become a significant concern due to its adverse health effects and growing evidence of antimicrobial-resistant gene evolution. To this end, a chemically modified bamboo biochar was prepared from bamboo sawdust to effectively remove ciprofloxacin (CIP) from an aqueous solution. Under similar adsorption conditions, the modified bamboo biochar (MBC) has an excellent CIP removal efficiency (96%) compared to unmodified bamboo biochar (UBC) efficiency (45%). Thus, MBC was used in batch adsorption experiments, and the process was optimized with the central composite design (CCD) framework of response surface methodology (RSM). Sorption process parameters such as initial CIP concentration, pH, adsorbent dose, and contact time were studied and found to have a significant effect on CIP removal. The optimal CIP removal (96%) was obtained at MBC dose (0.5 g L-1), CIP initial concentration (20 mg L-1), pH (7.5), and contact time (46 min). The adsorption kinetic data were well described by the pseudo-second-order model ( $R^2=0.999$ ), and both Langmuir ( $R^2=0.994$ ) and Freundlich ( $R^2=0.972$ ) models gave the best fit in CIP adsorption isotherm analysis. The maximum monolayer adsorption capacity of the MBC was 78.43 mg g-1 based on the Langmuir isotherm model. These results suggest that CIP adsorption was mainly controlled by chemisorption. Moreover, the CIP adsorption process was endothermic and spontaneous. Overall, MBC is a low-cost, efficient, and recyclable adsorbent for eliminating emerging contaminants such as ciprofloxacin from an aqueous solution.

Fabrication, application, and mechanism of metal and heteroatom co-doped biochar composites (MHBCs) for the removal of contaminants in water: A review

The potential risk of various contaminants in water has recently attracted public attention. Biochars and modified biochars have been widely developed for environmental remediation. Metal and heteroatom co-doped biochar composites (MHBCs) quickly caught the interest of researchers with more active sites and higher affinity for contaminants compared to single-doped biochar by metal or heteroatoms. This study provides a comprehensive review of MHBCs in wastewater decontamination. Firstly, the main fabrication methods of MHBCs were external doping and internal doping, with external doping being the most common. Secondly, the applications of MHBCs as adsorbents and catalysts in water treatment were introduced emphatically, which mainly included the removal of metals, antibiotics, dyes, pesticides, phenols, and other organic contaminants. Thirdly, the removal mechanisms of contaminants by MHBCs were deeply discussed in adsorption, oxidation and reduction, and degradation. Furthermore, the influencing factors for the removal of contaminants by MHBCs were also summarized, including the physicochemical properties of MHBCs, and environmental variables of pH and co-existing substance. Finally, futural challenges of MHBCs are proposed in the leaching toxicity of metal from MHBCs, the choice of heteroatoms on the fabrication for MHBCs, and the application in the composite system and soil remediation.

Preparation of magnesium Ferrite-Doped magnetic biochar using potassium ferrate and seawater mineral at low temperature for removal of cationic pollutants

Magnetic biochar has captured a great interest for remediation of environment as an easily separable carbonous adsorbent. Herein, a highly adsorptive magnetic biochar was manufactured through seawater mineral and K₂FeO₄ co-promoted pyrolysis of jackfruit peel at 300 °C for removal of different cationic pollutants, and characterized by element analysis, FTIR, SEM-EDS, XRD, XPS and so on. MgFe₂O₄ was generated without external base and a 19.42 emu/g saturation magnetization was achieved. Simultaneously, iron oxides and oxygen containing groups were introduced. The magnetic biochar exhibited 61.30 mg/g, 129.61 mg/g, and 1238.30 mg/g adsorption capacities for Cu²⁺, methylene blue (MB), and malachite green (MG) at 25 °C, respectively, and remarkably surpassed the corresponding pristine biochar. The adsorption of MB and MG was mainly realized by electrostatic interaction, hydrogen bonding, complexation, and π-π electron-donor-acceptor interaction, and that of Cu²⁺ was attributed to electrostatic interaction, hydrogen bonding, and complexation.

Simultaneous adsorption of tetracycline, ammonium and phosphate from wastewater by iron and nitrogen modified biochar: Kinetics, isotherm, thermodynamic and mechanism

The simultaneous removal of various pollutants in wastewater is increasingly deserved attention. In this study, an efficient adsorbent Fe/N@BC was synthesized by Fe-N co-modification. The adsorbability of Fe/N@BC was evaluated using a mixture with tetracycline (TC), NH₄⁺-N and PO₄^3-P. In comparison to BC, N@BC and Fe@BC, Fe/N@BC exhibited an excellent performance for simultaneously absorbing TC, NH₄⁺-N and PO₄^3-P. The pseudo-first-order was used to describe the adsorption process of NH₄⁺-N and PO₄^3-P, while the pseudo-second-order could be well fitted to TC adsorption data. The adsorption isotherms of TC, NH₄⁺-N and PO₄^3-P were more in line with Sips model (Adj.R² > 0.97). The maximum adsorption capacities of Fe/N@BC towards TC, NH₄⁺-N and PO₄^3-P were 238.94, 111.87 and 165.02 mg g^-1, respectively, which were 1.31-1.91 times than that of BC, N@BC and Fe@BC. The simultaneous adsorption mechanism mainly involved pore filling, electrostatic interaction, ion exchange, surface complexation, surface precipitation, H bond and π-π interaction. Furthermore, after six cycles, the removal efficiencies of TC, NH₄⁺-N and PO₄^3-P were 75.3, 66.1 and 64.5% by Fe/N@BC, highlighting its promising potential to adsorb multi-pollutants from aqueous solution.

Functional Biochar and Its Balanced Design

Biochar has attracted increasing research attention. Various modification methods have been proposed to enhance a certain biochar function. However, these modifications may also result in an unstable structure, additional energy consumption, secondary pollution, and/or extra cost. Balanced consideration of different aspects will ensure the sustainable development of biochar technology. This review first summarizes the most commonly used methods for biochar modification. These methods are categorized according to the purposes of modification, such as surface area enlargement, persistent free radical manipulation, magnetism introduction, and redox potential enhancement. More importantly, a systematic analysis and discussion are provided regarding the balanced consideration of biochar designs, such as the balance between effectiveness and stability, functions and risks, as well as effectiveness and cost. Then, perspectives regarding biochar modification are presented. This review calls for attention that biochar modifications should not be evaluated for their functions only. A balanced design of biochars will ensure both the practicability and the effectiveness of this technology.

Facile preparation of magnetic porous biochars from tea waste for the removal of tetracycline from aqueous solutions: Effect of pyrolysis temperature

Pyrolysis process significantly influences the physicochemical properties and potential application of magnetic porous biochars (MPBCs). However, the effects of pyrolysis temperature on the properties of MPBCs as well as substantial adsorption are still unclear. This study reported a facile method to obtain the MPBC from tea waste via pyrolysis of a mixture of hydrochar, KHCO₃, and FeCl₃·6H₂O under different temperatures (500-800 °C), and explored further the adsorption toward tetracycline (TC). Results showed pyrolysis temperature obviously influenced the physicochemical properties of MPBCs, and MPBC pyrolyzed at 700 °C (MPBC-700) has a highest specific surface area (1066 m² g^-1) and pore volume (2.693 cm³ g^-1). However, the adsorption potential increased consistently from 59.35 mg g^-1 for MPBC-500 to 333.22 mg g^-1 for MPBC-800, suggesting that the surface area and pore volume were not the only factors determining TC adsorption. Further analysis showed that the pore-filling, π-π interaction, complexation, and hydrogen bonding contributed together to TC adsorption. Moreover, all MPBCs possessed a high saturation magnetization, indicating the easy separation by an external magnet. Therefore, MPBCs (especially at 700 °C) can act as the excellent adsorbents for contaminant removal due to their high separation, adsorption, and reuse performance.

Optimizing magnetic functionalization conditions for efficient preparation of magnetic biochar and adsorption of Pb(II) from aqueous solution

Recoverable magnetic biochar has great potential for treating wastewater contaminants such as Pb(II). However, whether magnetic modification could enhance metal adsorption efficiency is currently contradictory in the literature mainly due to the differences in selecting various magnetic functionalization conditions. Considering this gap in knowledge, the effects of magnetic functionalization method (impregnation and precipitation), concentration of precursor iron solution (0.01-1 M), and pyrolysis temperature (300-700 °C) on the characteristics and Pb(II) adsorption capacity of biochar were systematically investigated in this paper. Results indicated that Fe₃O₄ was the main product for magnetic biochars synthesized using the impregnation (denoted as FWFe(3)) and precipitation methods (denoted as FWFe(2)). Magnetic functionalization resulted in remarkably increased pH and more negative zeta potential for FWFe(2) samples, whereas FWFe(3) samples showed the opposite trends. The adsorption of Pb(II) on different biochars fitted the pseudo-second order model and the Langmuir model. The maximum adsorption capacity was 817.64 mg/g for FWFe(2)1M700C (precipitation by 1 M of Fe(II)/Fe(III), pyrolysis at 700 °C), outperforming FWFe(3) and pristine biochar samples by around 5-13 times. Mechanism study indicated that the adsorption mainly involved electrostatic attraction, ion exchange, co-precipitation, and complexation. Pb(II) adsorption capacity was strongly dependent on the alkali pH of biochar. However, this efficiency was less affected by biochar surface area and its morphology. The higher pH of FWFe(2) samples not only led to an increased surface charge for stronger electrostatic attraction and ion exchange but also favored the formation of co-precipitates. By contrast, FWFe(3) samples showed a decreased adsorption capacity for Pb(II) with increased concentration of embedded iron. Overall, magnetic biochar, prepared using precipitation followed by high-temperature pyrolysis (such as, FWFe(2)1M700C), can be a promising adsorbent for Pb(II) adsorption from wastewater.

Recyclable nitrogen-doped biochar via low-temperature pyrolysis for enhanced lead(II) removal

Facile and low-cost preparation are essential in the conversation of agricultural waste into biochar. In this work, nitrogen-doped biochar (NBC-350-0.1) was prepared by thermal decomposition of urea (urea/biochar = 0.1:1 mass ratio) at a low temperature of 350 °C. NBC-350-0.1 showed good performance for Pb(II) removal with the maximum adsorption capacity of 130.87 mg g^-1 at 25 °C, which was five times that of pristine biochar (BC). Adsorption kinetics, isotherms and thermodynamics studies indicated that the adsorption of Pb(II) by NBC-350-0.1 or BC was the homogeneous monolayer adsorption with chemical action as the rate-limiting step, and was accompanied by spontaneous endothermic. Further analysis showed that the removal of Pb(II) on NBC-350-0.1 and BC depended on the complexation with unsaturated carbon bonds and ion exchange with Ca(II). Moreover, graphitic- and pyridinic-N in NBC-350-0.1 exerted a key part in the adsorption of Pb(II). NBC-350-0.1 regenerated by NaOH exhibited excellent recycling performance keeping the original removal efficiency at 84% after five cycles. In addition, this N doping method is suitable for improving the performance of coffee grounds, sawdust, and bagasse biochar. These results would provide an idea for obtaining recyclable N-doped biochar to treat the Pb(II) polluted wastewater.

Enhanced removal of Cr(VI) by nitrogen-doped hydrochar prepared from bamboo and ammonium chloride

N-doped biochar can effectively eliminate toxic Cr(VI). Here, N-doped hydrochar (NHC) was successfully synthesized by one-pot hydrothermal carbonization (HTC) of NH₄Cl and bamboo, and employed to adsorb Cr(VI). The specific surface area, pore volume, and carbon and nitrogen contents of NHC all increase compared with the undoped hydrochar (HC). NH₄Cl acts as a cheap nitrogen source to enhance the nitrogen content of hydrochar and as an acid catalyst to accelerate hydrochar carbonization. Adsorption experiments show NHC has higher adsorption capacity than HC for Cr(VI). XPS and FTIR imply the dominant mechanisms of adsorbing Cr(VI) onto two hydrochars are electrostatic attraction, reduction and complexation, but the contributions of surface functional groups in two hydrochars for elimination of Cr(VI) differ. The doped nitrogen in NHC is pivotal in adsorbing and reducing Cr(VI). Hence, NHC prepared from bamboo and NH₄Cl by one-step HTC is a cheap and efficient adsorbent to eliminate aqueous Cr(VI).

Application of co-pyrolysis biochar for the adsorption and immobilization of heavy metals in contaminated environmental substrates

Heavy metal pollution has been considered as a serious threat to the environment and human in the past decades due to its toxic and unbiodegradable properties. Recently, extensive studies have been carried out on the removal of heavy metals, and various adsorption materials have been successfully developed. Among, biochar is a promising option because of its advantages of various biomass sources, abundant microporous channels and surface functional groups, as well as its attractive economic feasibility. However, the application of pristine biochar is limited by its low adsorption capacity and nonregenerative property. Co-pyrolysis biochar, produced from the pyrolysis of biomass with the addition of another biomass or non-biomass precursor, is potential in overcoming the limitation of pristine biochar and achieving superior performance for heavy metal adsorption and immobilization. Therefore, this article summarizes the recent advances in development and applications of co-pyrolysis biochar for adsorption and immobilization of various heavy metals in contaminated environmental substrates. In details, the production, characteristics and advantages of co-pyrolysis biochar are initially presented. Subsequently, the adsorption behaviors and mechanisms of different heavy metals (including Hg, Zn, Pb, Cu, Cd, Cr, As, etc.) in flue gas and wastewater by co-pyrolysis biochar are reviewed, as well as factors influencing their adsorption capacities. Meanwhile, the immobilization of heavy metals in both biochar itself and contaminated soils by co-pyrolysis biochar is discussed. Finally, the limitations of current studies and future prospects are proposed. It aims at providing a guideline for the exploitation and application of cost-effective and environmental-friendly co-pyrolysis biochar in the decontamination of environmental substrates.

Application of biochars in the remediation of chromium contamination: Fabrication, mechanisms, and interfering species

Chromium (Cr) is one of the most toxic pollutants that has accumulated in terrestrial and aqueous systems, posing serious risks towards living beings on a worldwide scale. The immobilization, removal, and detoxification of active Cr from natural environment can be accomplished using multiple advanced materials. Biochar, a carbonaceous pyrolytic product made from biomass waste, is considered as a promising material for the elimination of Cr contamination. The preparation and properties of biochar as well as its remediation process for Cr ions have been well investigated. However, the distinct correlation of the manufacturing, characteristics, and mechanisms involved in the remediation of Cr contamination by various designed biochars is not summarized. Herein, this review provides information about the production, modification, and characteristics of biochars along with their corresponding effects on Cr stabilization. Biochar could be modified via physical, hybrid, chemical, and biological methods. The remediating mechanisms of Cr contamination using biochars involve adsorption, reduction, electron shuttle, and photocatalysis. Moreover, the coexisting ions and organic pollutants change the pattern of the remediating process of biochar in actual Cr contaminated water and soil. Finally, the present limitations and future perspectives are proposed.

Effect of Fe-N modification on the properties of biochars and their adsorption behavior on tetracycline removal from aqueous solution

Tetracycline (TC) adsorption capacity on pristine biochar was limited. Biochar modification can greatly improve its adsorption amount. In this study, rice straw was mixed with FeCl₃·6H₂O and urea to prepare a Fe-N modified biochar via a one-pot pyrolysis method at 700 °C. Meanwhile, pristine biochar (RSBC), urea modified biochar (N-RSBC), FeCl₃·6H₂O-modified biochar (Fe-RSBC) were produced as control. More functional groups, more graphited carbon structure, and magnetic components were observed in Fe-N-RSBC. Compared with RSBC, the surface area, total pore and micropore volume of Fe-N-RSBC increased 3.4-fold, 3.0-fold and 2.3-fold, respectively. The maximum capacity of TC adsorption on Fe-N-RSBC reached 156 mg·g^-1, which was 5.4 - fold, 8.2 - fold and 1.9 - fold increase to that of RSBC, N-RSBC, Fe-RSBC, respectively. The mechanism of TC adsorption on Fe-N-RSBC involved pore filling, hydrogen-bondinteraction, surface complexation, and π-π interaction. Therefore, Fe-N-RSBC can be used as an effective adsorbent for TC removal from aqueous solution.

Effect of carbonization methods on the properties of tea waste biochars and their application in tetracycline removal from aqueous solutions

The properties of biochars and their adsorption performance are highly dependent on the carbonation methods. In this study, five carbonation methods, namely, hydrothermal treatment (HT), direct carbonization (BC), carbonization of hydrochar (HBC), KHCO₃ activation carbonation (KBC), and KHCO₃ activation carbonation of hydrochar (KHBC), were adopted to prepare tea waste biochars. Adsorption behaviors and mechanisms toward tetracycline (TC) by biochar in the aquatic environment were investigated. The results showed that carbonation methods significantly influence the morphology, carbon structure, chemical composition, and functional groups of the biochars based on the characterization of surface area and pore volume analysis, Fourier Transform Infrared Spectroscopy, Raman spectrum, Scanning Electron Microscope, Transmission Electron Microscope, X-ray photoelectron spectroscopy, X-Ray Diffraction, and elemental analysis. Combination of hydrothermal treatment with KHCO₃ activation can significantly increase the surface area and enlarge the pore structure of biochar (KHBC and KBC). The BET of KHCO₃-activated BCs nearly increased 280 times (KHBC: 1350.80 m² g^-1; KBC: 1405.06 m² g^-1). BET, total pore volume and micropores volume of biochar has a positive influence on TC adsorption capacity. In addition, all adsorption processes can be well fitted by Langmuir and pseudo-second-order kinetic models. The maximum adsorption capacity of KHCO₃-activated BCs nearly increased approximately 40 times (KHBC: 451.45 mg g^-1; KBC: 425.17 mg g^-1). The dominant mechanisms of biochar-adsorbed TC were pore-filling effect and π-π interactions, followed by hydrogen bonds and electrostatic interactions. Therefore, KHBC has the potential to act as sorbents for TC removal from aquatic environment.

Hydrochar and pyrochar for sorption of pollutants in wastewater and exhaust gas: A critical review

Pollutants in wastewater and exhaust gas bring out serious concerns to public health and the environment. Biochar can be developed as a sustainable adsorbent originating from abundant bio-wastes, such as agricultural waste, forestry residue, food waste and human waste. Here we highlight the state-of-the-art research progress on pyrochar and hydrochar for the sorption of pollutants (heavy metal, organics, gas, etc) in wastewater and exhaust gases. The adsorption performance of pyrochar and hydrochar are compared and discussed in-depth, including preparation procedures (carbonization and activation), sorption possible mechanisms, and physiochemical properties. Challenges and perspective for designing efficient and environmental benign biochar-based adsorbents are finally addressed.

Sustainable Chromium (VI) Removal from Contaminated Groundwater Using Nano-Magnetite-Modified Biochar via Rapid Microwave Synthesis

This study developed a nano-magnetite-modified biochar material (m-biochar) using a simple and rapid in situ synthesis method via microwave treatment, and systematically investigated the removal capability and mechanism of chromium (VI) by this m-biochar from contaminated groundwater. The m-biochar was fabricated from reed residues and magnetically modified by nano-Fe₃O₄. The results from scanning electron microscopy (SEM) and X-ray diffraction (XRD) characterisations confirmed the successful doping of nano-Fe₃O₄ on the biochar with an improved porous structure. The synthesised m-biochar exhibited significantly higher maximum adsorption capacity of 9.92 mg/g compared with that (8.03 mg/g) of the pristine biochar. The adsorption kinetics followed the pseudo-second-order model and the intraparticle diffusion model, which indicated that the overall adsorption rate of Cr(VI) was governed by the processes of chemical adsorption, liquid film diffusion and intramolecular diffusion. The increasing of the pH from 3 to 11 significantly affected the Cr(VI) adsorption, where the capabilities decreased from 9.92 mg/g to 0.435 mg/g and 8.03 mg/g to 0.095 mg/g for the m-biochar and pristine biochar, respectively. Moreover, the adsorption mechanisms of Cr(VI) by m-biochar were evaluated and confirmed to include the pathways of electrostatic adsorption, reduction and complexation. This study highlighted an effective synthesis method to prepare a superior Cr(VI) adsorbent, which could contribute to the effective remediation of heavy metal contaminations in the groundwater.

A review of recent advancements in utilization of biomass and industrial wastes into engineered biochar

For past few years, biochar has gained a great deal of attention for its versatile utility in agricultural and environmental applications. The diverse functionality and environmental-friendly nature of biochar have motivated many researchers to delve into biochar researches and spurred rapid expansion of literature in recent years. Biochar can be produced from virtually all the biomass, but the properties of biochar are highly dependent upon the types of feedstock biomass and preparation methods. The overall performances of as-prepared biochar in treating soil and water contaminants is generally inferior to activated carbon due to its lower surface area and limited functionalities. This limitation has led to many follow-up studies that focused on improving material characteristics by imparting desired functionality. Such efforts have greatly advanced knowledge to produce better-performing engineered biochar with enhanced capability and versatility. To this end, this review was prepared to compile recent advancements in fabrication and application of engineered biochar, especially with respect to the influences of biomass feedstock on the properties of biochar and the utilization of industrial wastes in fabrication of engineered biochar.

Preparation of N-doped biochar from sewage sludge and melamine for peroxymonosulfate activation: N-functionality and catalytic mechanisms

In this study, a group of nitrogen-doped sludge biochar were prepared by a single-step pyrolysis method and employed as catalysts for the activation of peroxymonosulfate (PMS). The N content of as-synthesized biochar composites was altered by adding a different ratio of melamine with the precursors. The sample characterization results indicated that the N content of sludge-melamine-blended biochar named SM-(0.5:1) significantly increased from 1.91 to 9.93% compared with that of raw sludge biochar. Consequently, the surface area and mesoporosity also enhanced. SM-(0.5:1) exhibited excellent degradation ability of reluctant organic pollutants in PMS/acidic media, which outperformed many previously reported carbocatalysts. Complete color removal of a mixture solution of seven cationic and anionic dyes (10 mg L^-1 of each) was achieved within 50 min by using 200 mg L^-1 of SM-(0.5:1) and 350 mg L^-1 of PMS. A mechanism study indicated that the non-radical process performed by the pyridine N dominated the oxidative degradation of pollutants rather than that of SO₄^- and OH radical process governed by graphitic N, CO, and surface metal oxides. This study concurrently provides a facile route of enhancing N functionality of sludge-based carbocatalysts and an efficient way of sludge valorization.

A highly efficient strategy for enhancing the adsorptive and magnetic capabilities of biochar using Fenton oxidation

Fenton modification, involving iron-promoted pyrolysis followed by H₂O₂ oxidation, was first employed to improve the adsorptive and magnetic capabilities of biochar. Modified biochars were prepared from rubber tree bark and coconut shell through iron-promoted pyrolysis and subsequent H₂O₂ oxidation, and their adsorption behaviors toward Cr (VI) and MB were evaluated in aqueous solution. The modified biochars pyrolyzed at 300 and 400 ˚C displayed much higher adsorption capabilities than corresponding pristine biochars for Cr (VI) and MB, respectively, ascribing to introduction of COOH, CO and C-O groups by Fenton oxidation. More importantly, saturation magnetization could be enhanced by transforming nonmagnetic iron oxides into γ-Fe₂O₃ through H₂O₂ oxidation. The removal of Cr (VI) and MB could be primarily contributed to the adsorption of biochar matrix by reduction/hydrogen bonding/cation exchange/electrostatic interaction and hydrogen bonding/cation exchange/electrostatic interaction, respectively. This would provide a novel and efficient strategy for making highly adsorptive magnetic biochar.

Pyrolyzed fabrication of N/P co-doped biochars from (NH4)3PO4-pretreated coffee shells and appraisement for remedying aqueous Cr(VI) contaminants

In this study, an agricultural residue-derived biochar was fabricated by pyrolyzing coffee shells using (NH₄)₃PO₄ pretreatment. The influence of pyrolysis temperature on the structure and properties of biochars was investigated. The elemental analysis, spectroscopic and textural studies showed that the biochars were endued sufficient N and P co-doping and large specific surface area by (NH₄)₃PO₄-pretreatment. The appraisement for remedying aqueous Cr(VI) contaminants demonstrated that the N/P co-doped biochars offered high efficiencies above 95% for aqueous Cr(VI) removal. The mechanism investigation displayed that the adsorption and reduction of Cr(VI) were boosted by the synergistic effect between the hierarchical pore structure and the groups related to oxygen, nitrogen and phosphorus. Moreover, the biochar can be readily regenerated by HCl solution soaking for reuses several times. This work should permit for providing a convenient utilization of coffee shell agricultural residues, and the coffee shell-derived biochars supplied potential for remedying Cr(VI) in effluents.

Carboxyl and hydroxyl groups enhance ammonium adsorption capacity of iron (III) chloride and hydrochloric acid modified biochars

The effectiveness of the modification of wheat straw biochar using FeCl₃ and HCl, alone or combined, on ammonium adsorption was evaluated using kinetic and isotherm models. The adsorption mechanisms were studied by comparative analysis of the surface properties of the biochars before and after ammonium adsorption. The results indicate that the modification methods enhanced the ammonium adsorption capacity by at least 14%, due to the increased OH and OCO functional groups and specific surface area, and increased Fe³⁺/Fe²⁺ redox coupling serving as an electron shuttle. It can be concluded that chemical modification of wheat straw biochars using FeCl₃ and HCl increased the effectiveness of biochars for the treatment of ammonium-contaminated wastewater.

Removal of Aquatic Cadmium Ions Using Thiourea Modified Poplar Biochar

Removal of aquatic cadmium ions using biochar is a low-cost method, but the results are usually not satisfactory. Modified biochar, which can be a low-cost and efficient material, is urgently required for Cd-polluted water and soil remediation. Herein, poplar bark (SB) and poplar sawdust (MB) were used as raw materials to prepare modified biochar, which is rich in N- and S- containing groups, i.e., TSBC-600 and TMBC-600, using a co-pyrolysis method with thiourea. The adsorption characteristics of Cd2+ in simulated wastewater were explored. The results indicated that the modification optimized the surface structure of biochar, Cd2+ adsorption process by both TSBC-600 and TMBC-600 was mainly influenced by the initial pH, biochar dosage, and contact time, sthe TSBC-600 showed a higher adsorption capacity compared to TMBC-600 under different conditions. The Langmuir adsorption isotherm model and pseudo-second-order kinetic model were more consistent with the adsorption behavior of TSBC-600 and TMBC-600 to Cd2+, the maximum adsorption capacity of TSBC-600 and TMBC-600 calculated by the Langmuir adsorption isotherm model was 19.998 mg/g and 9.631 mg/g, respectively. The modification method for introducing N and S into biochar by the co-pyrolysis of biomass and thiourea enhanced the removal rate of aquatic cadmium ions by biochar.

A novel magnetic biochar prepared by K2FeO4-promoted oxidative pyrolysis of pomelo peel for adsorption of hexavalent chromium

Magnetic biochar was usually prepared using ferrous and ferric compounds as precursor of magnetic medium. Ferrate, which could be an internal oxidative modifier, was less explored for preparing magnetic biochar. Here, a magnetic biochar was prepared through K₂FeO₄-promoted pyrolysis of pomelo peel for adsorption of hexavalent chromium. Oxygen-containing groups and single phase ɤ-Fe₂O₃ were simultaneously introduced into biochar matrix at 300 °C. The magnetic biochar exhibited 209.64 mg/g maximum adsorption capability at 45 °C, outperformed the best magnetic biochar with 142.86 mg/g maximum adsorption capability at 40 °C in the literature. Moreover, a good magnetism was obtained, facilitating separation of the magnetic biochar from aqueous solution by a magnet. The removal of hexavalent chromium was contributed to the hybrid adsorption of ɤ-Fe₂O₃ and biochar matrix by reduction, electrostatic interaction and complexation. This method was attractive, required neither extra modifiers nor multiple operations for preparation of highly adsorptive magnetic biochar.

High-Efficiency Removal of Cr(VI) from Wastewater by Mg-Loaded Biochars: Adsorption Process and Removal Mechanism

Biochars were produced with magnesium chloride as an additive for the sorption of hexavalent chromium dissolved in water using five types of straw (from taro, corn, cassava, Chinese fir, and banana) and one type of shell (Camellia oleifera) as the raw materials. The removal of hexavalent chromium by the six biochars mainly occurred within 60 min and then gradually stabilized. The kinetics of the adsorption process were second order, the Langmuir model was followed, and the adsorption of Cr(VI) by the six biochars was characterized by Langmuir monolayer chemisorption on a heterogeneous surface. Banana straw biochar (BSB) had the best performance, which perhaps benefitted from its special structure and best adsorption effect on Cr(VI), and the theoretical adsorption capacity was calculated as 125.00 mg/g. For the mechanism analysis, Mg-loaded biochars were characterized before and after adsorption by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), and scanning electron microscopy/energy dispersive spectroscopy (SEM-EDS). The adsorption mechanism differed from the adsorption process of conventional magnetic biochar, and biochar interactions with Cr(VI) were controlled mainly by electrostatic attraction, complexation, and functional group bonding. In summary, the six Mg-loaded biochars exhibit great potential advantages in removing Cr(VI) from wastewater and have promising potential for practical use, especially BSB, which shows super-high adsorption performance.

Nitrogen containing functional groups of biochar: An overview

Biochar is a carbonaceous material produced by thermal treatment, e.g., pyrolysis, of biomass in oxygen-deficient or oxygen-free environment. Nitrogen containing functional groups of biochar have a wide range of applications, such as adsorption of pollutants, catalysis, and energy storage. To date, many methods have been developed and used to strengthen the function of N-containing biochar to promote its application and commercialization. However, there is no review available specifically on the development of biochar technologies concerning nitrogen-containing functional groups. This paper aims to present a review on fractionation, analysis, formation, engineering, and application of N-functional groups of biochar. The effect of influencing factors on biochar N-functional groups, including biomass feedstock, pyrolysis parameters (e.g., temperature), and additional treatment (e.g., N-doping) were discussed in detail to reveal the formation mechanisms and performance of the N-functional groups. Future prospective investigation directions on the analysis and engineering of biochar N-functional groups were also proposed.