MOFs for the treatment of arsenic, fluoride and iron contaminated drinking water: A review

Recent advances and potential applications for metal-organic framework (MOFs) and MOFs-derived materials: Characterizations and antimicrobial activities

Microbial infections, particularly those caused by antibiotic-resistant pathogens, pose a critical global health threat. Metal-Organic Frameworks (MOFs), porous crystalline structures built from metal ions and organic linkers, initially developed for gas adsorption, have emerged as promising alternatives to traditional antibiotics. This review, covering research up to 2023, explores the potential of MOFs and MOF-based materials as broad-spectrum antimicrobial agents against bacteria, viruses, fungi, and even parasites. It delves into the historical context of antimicrobial agents, recent advancements in MOF research, and the diverse synthesis techniques employed for their production. Furthermore, the review comprehensively analyzes the mechanisms of action by which MOFs combat various microbial threats. By highlighting the vast potential of MOFs, their diverse synthesis methods, and their effectiveness against various pathogens, this study underscores their potential as a novel solution to the growing challenge of antibiotic resistance.

Conversion of locally available materials to biochar and activated carbon for drinking water treatment

For environmental sustainability and to achieve sustainable development goals (SDGs), drinking water treatment must be done at a reasonable cost with minimal environmental impact. Therefore, treating contaminated drinking water requires materials and approaches that are inexpensive, produced locally, and effortlessly. Hence, locally available materials and their derivatives, such as biochar (BC) and activated carbon (AC) were investigated thoroughly. Several researchers and their findings show that the application of locally accessible materials and their derivatives are capable of the adsorptive removal of organic and inorganic contaminants from drinking water. The application of locally available materials such as lignocellulosic materials/waste and its thermo-chemically derived products, including BC and AC were found effective in the treatment of contaminated drinking water. Thus, this review aims to thoroughly examine the latest developments in the use of locally accessible feedstocks for tailoring BC and AC, as well as their features and applications in the treatment of drinking water. We attempted to explain facts related to the potential mechanisms of BC and AC, such as complexation, co-precipitation, electrostatic interaction, and ion exchange to treat water, thereby achieving a risk-free remediation approach to polluted water. Additionally, this research offers guidance on creating efficient household treatment units based on the health risks associated with customized adsorbents and cost-benefit analyses. Lastly, this review work discusses the current obstacles for using locally accessible materials and their thermo-chemically produced by-products to purify drinking water, as well as the necessity for technological interventions.

Tuning Main Group Element-based Metal-Organic Framework to Boost Electrocatalytic Nitrogen Reduction Under Ambient Conditions

Main group element-based materials are emerging catalysts for ammonia (NH3 ) production via a sustainable electrochemical nitrogen reduction reaction (N2 RR) pathway under ambient conditions. However, their N2 RR performances are less explored due to the limited active behavior and unclear mechanism. Here, an aluminum-based defective metal-organic framework (MOF), aluminum-fumarate (Al-Fum), is investigated. As a proof of concept, the pristine Al-Fum MOF is synthesized by the solvothermal reaction process, and the defect engineering method namely solvent-assisted linker exchange, is applied to create the defective Al sites. The defective Al sites play an important role in ensuring the N2 RR activity for defective Al-Fum. It is found that only the defective Al-Fum enables stable and effective electrochemical N2 RR, in terms of the highest production rate of 53.9 µg(NH3 ) h-1 mgcat -1 (in 0.4 m K2 SO4 ) and the Faradaic efficiency of 73.8% (in 0.1 m K2 SO4 ) at -0.15 V vs reversible hydrogen electrode) under ambient conditions. Density functional theory calculations confirm that the N2 activation can be achieved on the defective Al sites. Such sites also allow the subsequent protonation process via the alternating associative mechanism. This defect characteristic gives the main group Al-based MOFs the ability to serve as promising electrocatalysts for N2 RR and other attractive applications.

Streamlined Water-Leaching Preconcentration Method As a Novel Analytical Approach and Its Coupling to Dispersive Micro-Solid-Phase Extraction Based on Synthetically Modified (Fe/Co) Bimetallic MOFs

The streamlined water-leaching preconcentration method is introduced as a novel preconcentration method in this study. The approach has many benefits including low consumption of organic solvent and deionized water and operation time, energy-saving, no need for dispersion or evaporation, and implementation of more efficient preconcentration. Also, a methodological study was done on the synthesis of (Fe/Co) bimetallic-organic framework that eased the synthesis procedure, decreased its time, and enhanced its analytical performance by increasing its surface area, total pore volume, and average pore diameter parameters. To perform the extraction, bi-MOF particles were added into the solution of interest enriched with sodium sulfate. After vortexing to adsorb the analytes, centrifugation isolated the sorbent particles. A microliter-volume of acetonitrile and 1,2-dibromoethane mixture was used for desorption aim via vortexing. After the separation of the organic phase and transferring it into a conical bottom glass test tube, a milliliter volume of sodium chloride solution was applied to leach the organic phase. A gas chromatograph equipped with a flame ionization detector was applied for the injection of the extracted phase. The method was applied for the extraction and preconcentration of some pesticides from juice samples. Wide linear ranges (5.44-1600 μg L-1), low relative standard deviations (3.1-4.5% for intra- (n = 6) and 3.5-5.2% for interday (n = 4) precisions), high extraction recoveries (61-95%), enrichment factors (305-475), and low limits of detection (0.67-1.65 μg L-1) and quantification (2.21-5.44 μg L-1) were obtained for the developed method.

New easily recycled carrier based polyurethane foam by loading Al-MOF and biochar for selective removal of fluoride ion from aqueous solutions

The production of Integrated circuits (ICs) generates wastewater with a high concentration of residual fluoride ions, necessitating highly efficient fluorine removal methods. In this study, a novel composite carrier was developed using a hydrothermal synthesis method to load Al-MOF and biochar (BC) onto polyurethane foam (PUF), resulting in the composite foam of Al-MOF-PUF@BC. The results showed that the composite carrier exhibited a stable fluoride removal effect, with a maximum adsorption capacity of 16.52 mg/g at room temperature. The adsorption isotherm curves were consistent with the Langmuir isotherm model, and the adsorption kinetics were well-described by the pseudo-first-order model. The mechanism of fluorine adsorption on Al-MOF-PUF@BC was ligand exchange with hydroxyl groups and the formation of FAl bonds. Density functional theory (DFT) calculations revealed that the adsorption energy reached -246.7 eV, indicating stable adsorption for fluoride ions. The composite foam demonstrated excellent regenerative properties and was effective for fluoride removal in actual IC wastewater.

Current advances in the detection and removal of organic arsenic by metal-organic frameworks

Arsenic (As) is a highly toxic heavy metal and has been widely concerned for its hazardous environmental impact. Aromatic organic arsenic (AOCs) has been frequently used as an animal supplement to enhance feed utilization and prevent dysentery. The majority of organic arsenic could be discharged from the body and evolve as highly toxic inorganic arsenic that is hazardous to the environment and human health via biological conversion, photodegradation, and photo-oxidation. Current environmental issues necessitate the development and application of multifunctional porous materials in environmental remediation. Compared to the conventional adsorbent, such as activated carbon and zeolite, metal-organic frameworks (MOFs) exhibit a number of advantages, including simple synthesis, wide variety, simple modulation of pore size, large specific surface area, excellent chemical stability, and easy modification. In recent years, numerous scientists have investigated MOFs related materials involved with organic arsenic. These studies can be divided into three categories: detection of organic arsenic by MOFs, adsorption to remove organic arsenic by MOFs, and catalytic removal of organic arsenic by MOFs. Here, we conduct a critical analysis of current research findings and knowledge pertaining to the structural characteristics, application methods, removal properties, interaction mechanisms, and spectral analysis of MOFs. We summarized the application of MOFs in organic arsenic detection, adsorption, and catalytic degradation. Other arsenic removal technologies and conventional substances are also being investigated. This review will provide relevant scientific researchers with references.

Valorization of Fibrous Plant-Based Food Waste as Biosorbents for Remediation of Heavy Metals from Wastewater-A Review

Mobilization of heavy metals in the environment has been a matter of concern for several decades due to their toxicity for humans, environments, and other living organisms. In recent years, use of inexpensive and abundantly available biosorbents generated from fibrous plant-based food-waste materials to remove heavy metals has garnered considerable research attention. The aim of this review is to investigate the applicability of using fibrous plant-based food waste, which comprises different components such as pectin, hemicellulose, cellulose, and lignin, to remove heavy metals from wastewater. This contribution confirms that plant-fiber-based food waste has the potential to bind heavy metals from wastewater and aqueous solutions. The binding capacities of these biosorbents vary depending on the source, chemical structure, type of metal, modification technology applied, and process conditions used to improve functionalities. This review concludes with a discussion of arguments and prospects, as well as future research directions, to support valorization of fibrous plant-based food waste as an efficient and promising strategy for water purification.

Low-cost biosorption of Fe(II) and Fe(III) from single and binary solutions using Ulva lactuca-derived cellulose nanocrystals-graphene oxide composite film

The marine algal biomass of Ulva lactuca was utilized for the extraction of cellulose and the development of cellulose nanocrystals/graphene oxide film. Cellulose nanocrystals with 50-150 nm were produced by H₂SO₄ hydrolysis of the algal cellulose. The adsorption efficiency of the nanocomposite film for Fe(II) and Fe(III) ions was successfully evaluated using Box-Behnken design. The maximum removal for Fe(II) (64.15%) could be attained at pH 5.13, adsorbent dosage 7.93 g L^-1 and Fe(II) concentration 15.39 mg L^-1, while the biosorption of Fe(III) was 69.92% at pH 5.0, adsorbent dosage 2 g L^-1, and Fe(III) concentration 15.0 mg L^-1. However, in the binary system, the removal efficiency of Fe(II) was enhanced to 95.48% at Fe(II):Fe(III) ratio of 1:1, while the Fe(III) removal was increased to 79.17% at ratio 1:2. The pseudo-second-order kinetics exhibited better fitting to the experimental results of Fe(II) and Fe(III) adsorption in both single and binary systems. The intra-particle diffusion was prominent during the biosorption, but the effect of the external mass transfer was significant. The Langmuir, Freundlich, Langmuir-Freundlich, Temkin, and Dubinin-Radushkevich isotherms showed satisfactory fitting to the experimental data, but they differ in priority based on iron state and pH. The adsorption of Fe(II) in the presence of Fe(III) in a mixture was best represented by the extended Langmuir model, while the extended Langmuir-Freundlich model best fitted the adsorption of Fe(III). The FT-IR analysis indicated that physisorption through electrostatic interaction/complexation is the predominant mechanism for the adsorption of iron using the nanocomposite film.

An all-embracing analytical method comprising modified QuEChERS-dispersive micro-solid-phase extraction-dispersive liquid-liquid microextraction using FeGA MOF for the extraction and preconcentration of pesticides simultaneously from juice and flesh of watermelon

For the first time, a comprehensive analytical method based on a one-dimensional metal-organic framework comprising "quick, easy, cheap, effective, rugged, and safe-dispersive micro solid phase extraction-dispersive liquid-liquid microextraction" was introduced in this research. Moreover, the first-ever attempt was accomplished to apply the iron-gallic acid metal-organic framework in analytical method development. The goal of the research was to analyze the pesticide content of watermelon comprehensively in its flesh and juice. Based on this, comprehensive and reliable food safety monitoring can be done. Initially, pesticides of the watermelon flesh were extracted using an mL volume of acetonitrile by vortexing. At the same time, the pesticides of watermelon juice were extracted from the juice matrix onto the sorbent particles facilitated by vortexing. The obtained acetonitrile phase was also used to desorb the analytes from the sorbent surface by vortexing. As a result, the pesticide content of both juice and flesh was extracted into the acetonitrile. The pesticide-enriched acetonitrile was then used as the disperser solvent by being merged with µL level of 1,2-dibromoethane and injection into deionized water. A cloudy solution was created as the result. Centrifugation triggered extractant at the bottom of the conical glass test tube and an aliquot of it was injected into a gas chromatograph equipped with a flame ionization detector. High enrichment factors (210-400), appreciable extraction recoveries (42-80%), wide linear ranges (3.20-1000 µg kg^-1), relative standard deviations in the ranges of 3.6-4.4% for intra- (n = 6) and 4.4-5.3% for inter-day (n = 3) precisions, and low limits of detection (0.43-0.97 µg kg^-1), and quantification (1.42-3.20 µg kg^-1) were obtained by the application of the developed method.

Recent Advances in Thallium Removal from Water Environment by Metal Oxide Material

Thallium is widely used in industrial and agricultural development. However, there is still a lack of systematic understanding of its environmental hazards and related treatment methods or technologies. Here, we critically assess the environmental behavior of thallium in aqueous systems. In addition, we first discuss the benefits and limitations of the synthetic methods of metal oxide materials that may affect the practicality and scalability of TI removal from water. We then assess the feasibility of different metal oxide materials for TI removal from water by estimating the material properties and contaminant removal mechanisms of four metal oxides (Mn, Fe, Al, and Ti). Next, we discuss the environmental factors that may inhibit the practicality and scalability of Tl removal from water. We conclude by highlighting the materials and processes that could serve as more sustainable alternatives to TI removal with further research and development.

Exploring the Potential of a Highly Scalable Metal-Organic Framework CALF-20 for Selective Gas Adsorption at Low Pressure

In this study, the ability of the highly scalable metal-organic framework (MOF) CALF-20 to adsorb polar and non-polar gases at low pressure was investigated using grand canonical Monte Carlo (GCMC) and molecular dynamics (MD) simulations. The results from the simulated adsorption isotherms revealed that the highest loading was achieved for SO₂ and Cl₂, while the lowest loading was found for F₂ molecules. The analysis of interaction energies indicated that SO₂ molecules were able to form the strongest adsorbent-adsorbate interactions and had a tight molecular packing due to their polarity and angular structure. Additionally, Cl₂ gas was found to be highly adsorbed due to its large van der Waals surface and strong chemical affinity in CALF-20 pores. MD simulations showed that SO₂ and Cl₂ had the lowest mobility inside CALF-20 pores. The values of the Henry coefficient and isosteric heat of adsorption confirmed that CALF-20 could selectively adsorb SO₂ and Cl₂. Based on the results, it was concluded that CALF-20 is a suitable adsorbent for SO₂ and Cl₂ but not for F₂. This research emphasizes the importance of molecular size, geometry, and polarity in determining the suitability of a porous material as an adsorbent for specific adsorbates.

The concentration of potentially toxic elements (PTEs) in drinking water from Shiraz, Iran: a health risk assessment of samples

The existence of potentially toxic elements (PTEs) in water bodies has posed a menace to human health. Thus, water resources should be protected from PTEs, and their effect on the exposed population should be investigated. In the present investigation, the concentrations of PTEs such as lead (Pb), mercury (Hg), manganese (Mn), and iron(Fe) in the drinking water of Shiraz, Iran, were determined for the first time. In addition, hazard quotient, hazard index, cancer risk, and sensitivity analysis were applied to estimate the noncarcinogenic and carcinogenic impacts of Pb, Hg, Mn, and Fe on exposed children and adults through ingestion. The mean concentrations (µg/L) of Pb, Hg, Mn, and Fe were 0.36, 0.32, 2.28, and 8.72, respectively, in winter and 0.50, 0.20, 0.55, and 10.36, respectively, in summer. The results displayed that Fe concentration was more than the other PTEs. PTE concentrations were lower than the standard values of the Environment Protection Agency and World Health Organization. Values of the degree of contamination and heavy metal pollution index for lead, mercury, manganese, and iron were significantly low (< 1) and excellent (< 50), respectively. Based on the Spearman rank correlation analysis, positive and negative relationships were observed in the present study. The observations of the health risk assessment demonstrated that mercury, lead, iron, and manganese had an acceptable level of noncarcinogenic harmful health risk in exposed children and adults (hazard quotients < 1 and hazard index < 1). The carcinogenic risk of lead was low (< E - 06), which can be neglected. Monte Carlo simulation showed that water intake rate and mercury concentration were the most critical parameters in the hazard index for children and adults. Lead concentration was also the most crucial factor in the cancer risk analysis. The results of the present study proved that the drinking water of Shiraz is safe and healthy and can be confidently consumed by people.

Graphene-Based Adsorbents for Arsenic, Fluoride, and Chromium Adsorption: Synthesis Methods Review

Water contamination around the world is an increasing problem due to the presence of contaminants such as arsenic, fluoride, and chromium. The presence of such contaminants is related to either natural or anthropogenic processes. The above-mentioned problem has motivated the search for strategies to explore and develop technologies to remove these contaminants in water. Adsorption is a common process employed for such proposals due to its versatility, high adsorption capacity, and lower cost. In particular, graphene oxide is a material that is of special interest due to its physical and chemical properties such as surface area, porosity, pore size as well as removal efficiency for several contaminants. This review shows the advances, development, and perspectives of materials based on GO employed for the adsorption of contaminants such as arsenite, arsenate, fluoride, and hexavalent chromium. We provided a detailed discussion of the synthesis techniques and their relationship with the adsorption capacities and other physical properties as well as pH ranges employed to remove the contaminants. It is concluded that the adsorption capacity is not proportional to the surface area in all the cases; instead, the synthesis method, as well as the functional groups, play an important role. In particular, the sol-gel synthesis method shows better adsorption capacities.

Redox and biometal status in Wistar rats after subacute exposure to fluoride and selenium counter-effects

This study aimed to investigate the effect of 150 mg/L sodium fluoride (NaF) on redox status parameters and essential metals [copper (Cu), iron (Fe), and zinc (Zn)] in the blood, liver, kidney, brain, and spleen of Wistar rats and to determine the protective potential of selenium (Se) against fluoride (F^-) toxicity. Male Wistar rats were randomly distributed in groups of five (n=5) receiving tap water (control) or water with NaF 150 mg/L, NaF 150 mg/L + Se 1.5 mg/L, and Se 1.5 mg/L solutions ad libitum for 28 days. Fluorides caused an imbalance in the redox and biometal (Cu, Fe, and Zn) status, leading to high superoxide anion (O^{2 .-}) and malondialdehyde (MDA) levels in the blood and brain and a drop in superoxide dismutase (SOD1) activity in the liver and its increase in the brain and kidneys. Se given with NaF improved MDA, SOD1, and O^{2 .-} in the blood, brain, and kidneys, while alone it decreased SH group levels in the liver and kidney. Biometals both reduced and increased F- toxicity. Further research is needed before Se should be considered as a promising strategy for mitigating F^- toxicity.

Effective defluoridation of water using nanosized UiO-66-NH2 encapsulated within macroreticular polystyrene anion exchanger

Environmental concerns associated with the efficient defluoridation of contaminated water remain a substantial challenge. In this work, a new nanocomposite, UiO-66-NH₂@PS⁺, was successfully fabricated via in situ precipitation of a water-stable metal-organic framework (UiO-66-NH₂) inside a commercial polystyrene anion exchanger PS⁺. The as-formed nanocomposite UiO-66-NH₂@PS⁺ was characterized using various morphological methods, which demonstrated that nanosized UiO-66-NH₂ was homogenously dispersed within the inner pores of PS⁺. Batch adsorption experiments indicated that UiO-66-NH₂@PS⁺ exhibited outstanding adsorption performance for fluoride over a broad pH range of 3.0-8.0. The saturated adsorption capacity of fluoride at 298 K was 27.5 and 32.8 mg/g for pH 6.5 and 4.5 with the adsorbent dosage of 0.5 g/L and initial concentration of 5-80 mg/L. Moreover, the utilization rate of active adsorption sites of UiO-66-NH₂ was greatly improved after encapsulation. The XPS study indicated that the integrated effects of specific inner-sphere coordination and ligand exchange between fluoride and UiO-66-NH₂ might be the dominant adsorption mechanism. Fixed-bed tests indicated that the UiO-66-NH₂@PS⁺ column could successively produce clean water with bed volumes of 350 and 70 ([F^-] <1.5 mg/L) from simulated fluoride-pollution water at pH 4.5 and 8.0, with a liquid velocity of 20 mL/h, and an empty bed contact time (EBCT) of 15 min, which was higher than that of the other materials. In addition, the exhausted UiO-66-NH₂@PS⁺ was regenerated and reused for 5 times through complete regeneration, highlighting the potential feasibility of defluorination in practical applications.

MIL series of metal organic frameworks (MOFs) as novel adsorbents for heavy metals in water: A review

With large specific surface area, abundant adsorption sites, flexible pore structure, and good water stability, Materials of Institute Lavoisier frameworks (MILs) have attracted increasing attention as effective environmental adsorbents. This review systematically analyzes and recapitulates recent progress in the synthesis and application of MIL-based adsorbents for the removal of aqueous heavy metal ions. Commonly used solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical syntheses of MILs are first summarized and compared. Instead of focusing on adsorption process parameters, adsorption performances and governing mechanisms of virgin MILs, functional MILs, MIL-based composites, and carbonized MILs to representative metal(loid) ions (chromium, arsenic, lead, cadmium, and mercury) in water under various conditions are then systematically reviewed and discussed. In the end, this work also outlines prospects and future directions to promote the applications of MILs in treating heavy metal contaminated water.

Steric hindrance effect on the excited-state proton transfer process: TDDFT study on the fluorescent sensing mechanism of a fluoride sensor

An understanding of the excited-state process and the sensing mechanism for specific anions can be helpful for the design and synthesis of fluorescent sensors in analytical chemistry and biotechnology. Here, we theoretically investigated the fluorescent response mechanism of a reported acylhydrazone-based fluorescent sensor (Soft Matter, 2019, 15, 6690) for fluoride recognition using the time-dependent density functional theory approach. At the M06/TZVP/SCM level, the vertical excitation energies, which were calculated based on the ground state and first singlet-state geometries of the sensor molecule, agreed well with the experimental ultraviolet-visible and fluorescence spectra. Therefore, the time-dependent density functional theory method was considered reasonable and effective. According to the frontier orbital analysis and an excited-state potential energy scan, we proposed an excited-state proton transfer mechanism for the sensor-fluorine complex, where the steric hindrance leads to a high potential barrier. The excited-state proton transfer process facilitates sensor molecule deprotonation, alleviates its steric hindrance effect and expands its conjugated system. As a result, the fluorescence emission band of the sensor molecule was red-shifted significantly with the addition of fluoride anion. Based on this fluorescence difference, the sensor could be used for fluoride anion identification. This work provides a strategy to study sensor-analyte interactions in the excited state and offers an approach to tune the fluorescence emission wavelength of sensor molecules in anionic environments.

Recent Advances in MOF-Based Adsorbents for Dye Removal from the Aquatic Environment

The adsorptive removal of dyes from industrial wastewater using commercially available adsorbents is not significantly efficient. Metal–organic frameworks (MOFs) offer outstanding properties which can boost the separation performance over current commercial adsorbents and hence, these materials represent a milestone in improving treatment methods for dye removal from water. Accordingly, in this paper, the recent studies in the modification of MOF structures in dye removal from the aquatic environment have been discussed. This study aims to elaborate on the synthetic strategies applied to improve the adsorption efficiency and to discuss the major adsorption mechanisms as well as the most influential parameters in the adsorptive removal of dyes using MOFs. More particularly, the advanced separation performance of MOF-based adsorbents will be comprehensively explained. The introduction of various functional groups and nanomaterials, such as amine functional groups, magnetic nanoparticles, and carbon-based materials such as graphene oxide and CNT, onto the MOFs can alter the removal efficiency of MOF-based adsorbents through enhancing the water stability, dispersion in water, interactions between the MOF structure and the contaminant, and the adsorption capacity. Finally, we summarize the challenges experienced by MOF-based materials for dye removal from water and propose future research outlooks to be considered.

Bimetallic Cd/Zr-UiO-66 material as a turn-on/off probe for As5+/Fe3+ in organic media

In this work, a series of bimetallic Cd/Zr-UiO-66 materials were successfully synthesized for fluorescence sensing toward traces of As⁵⁺ and Fe³⁺ via a one-pot method. Interestingly, the obtained bimetallic Cd/Zr-UiO-66 (1:9) can be served as turn-on probe for As⁵⁺ as well as turn-off probe for Fe³⁺. The LODs of Cd/Zr-UiO-66 (1:9) toward As⁵⁺ and Fe³⁺ were calculated to be 5.4 μM and 4.3 μM, respectively, indicating its effective sensing properties for As⁵⁺ and Fe³⁺ in methanol media. Moreover, even in the presence of other potentially interfering toxic metal ions such as As³⁺, Cd²⁺ and Pb²⁺, Cd/Zr-UiO-66 (1:9) still presented good anti-interference abilities. Additionally, the removal efficiency of Cd/Zr-UiO-66 (1:9) toward As⁵⁺ was higher than 70% when the initial As⁵⁺ was lower than 50 mg/L. The fluorescence quenching of Fe³⁺ were mainly due to the competitive absorption of excitation source and RET, while the ACE mechanism was mostly responsible for the enhancement of As⁵⁺. More importantly, this job might pave the way for future researches and applications on sensing As⁵⁺ and Fe³⁺.

Nanotechnology in the Restoration of Polluted Soil

The advancements in nanoparticles (NPs) may be lighting the sustainable and eco-friendly path to accelerate the removal of toxic compounds from contaminated soils. Many efforts have been made to increase the efficiency of phytoremediation, such as the inclusion of chemical additives, the application of rhizobacteria, genetic engineering, etc. In this context, the integration of nanotechnology with bioremediation has introduced new dimensions for revamping the remediation methods. Hence, advanced remediation approaches combine nanotechnological and biological remediation methods in which the nanoscale process regulation supports the adsorption and deterioration of pollutants. Nanoparticles absorb/adsorb a large variety of contaminants and also catalyze reactions by lowering the energy required to break them down, owing to their unique surface properties. As a result, this remediation process reduces the accumulation of pollutants while limiting their spread from one medium to another. Therefore, this review article deals with all possibilities for the application of NPs for the remediation of contaminated soils and associated environmental concerns.

Synthesis and characterization of nano zerovalent iron-kaolin clay (nZVI-Kaol) composite polyethersulfone (PES) membrane for the efficacious As2O3 removal from potable water samples

In this study, Kaolin clay, a mining material, was used as an abundant and available mineral as zero-valent iron-kaolinite composites for As₂O₃ removal from the water samples. The composites were made by the sodium borohydrate reduction method. The existence of Fe⁰ in the produced composites was confirmed by X-ray diffraction (XRD) and Fourier-Transform Infrared Spectroscopy (FTIR) analysis. The membranes are prepared with zerovalent nano Iron-Kaolin and PES. The synthesized composites were then mixed with polyethersulfone to prepare the membranes S1, S2, and S3 with varying compositions. Field Emission Scanning Electron Microscopy (FESEM) analysis of the produced membranes showed the porous structure and the contact angle of membranes increased the hydrophilicity. The membranes were explored for the removal of As₂O₃ (AsIII) in potable water samples. The filtration studies were carried out using the syringe filtration setup. Analysis of the arsenic (III) solution was carried out, before and after the filtration process using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), which showed a maximum of 50% reduction in its original concentration. The filtered membrane is analyzed for arsenic by Energy Dispersive X-ray (EDX) technique. Thus, the synthesized membrane effectively sieves the arsenic in water samples.

As(III, V) Uptake from Nanostructured Iron Oxides and Oxyhydroxides: The Complex Interplay between Sorbent Surface Chemistry and Arsenic Equilibria

Iron oxides/oxyhydroxides, namely maghemite, iron oxide-silica composite, akaganeite, and ferrihydrite, are studied for As^V and As^III removal from water in the pH range 2–8. All sorbents were characterized for their structural, morphological, textural, and surface charge properties. The same experimental conditions for the batch tests permitted a direct comparison among the sorbents, particularly between the oxyhydroxides, known to be among the most promising As-removers but hardly compared in the literature. The tests revealed akaganeite to perform better in the whole pH range for As^V (max 89 mg g⁻¹ at pH₀ 3) but to be also efficient toward As^III (max 91 mg g⁻¹ at pH₀ 3–8), for which the best sorbent was ferrihydrite (max 144 mg g⁻¹ at pH₀ 8). Moreover, the study of the sorbents’ surface chemistry under contact with arsenic and arsenic-free solutions allowed the understanding of its role in the arsenic uptake through electrophoretic light scattering and pH measurements. Indeed, the sorbent’s ability to modify the starting pH was a crucial step in determining the removal of performances. The As^V initial concentration, contact time, ionic strength, and presence of competitors were also studied for akaganeite, the most promising remover, at pH₀ 3 and 8 to deepen the uptake mechanism.

Health risk assessment induced by trace toxic metals in tap drinking water: Condorcet principle development

Acute exposure to trace metals (TMs) in water is hazardous to human health. The average concentrations (C_avg.) and carcinogenic (CAR) and non-carcinogenic (non-CAR) risks of eight TMs to World Health Organization's (WHO) guidelines and national standard limits (NSLs)were determined. The C_avg. and (the range) of As, Hg, Cd, Pb, Co, Cr, Ni, and Zn were measured as 4.29 ± 0.57 μg L^-1 (1.12-10.27 μg L^-1), 0.22 ± 0.10 μg L^-1 (ND-1.05 μg L^-1), 0.31 ± 0.18 μg L^-1 (ND-1.80 μg L^-1), 4.66 ± 0.32 μg L^-1 (0.10-14.22 μg L^-1), 24.61 ± 4.65 μg L^-1 (3.11-67.25 μg L^-1), 16.86 ± 5.54 μg L^-1 (5.12-34.61 μg L^-1), 14.07 ± 4.37 μg L^-1 (3.79-31.39 μg L^-1), and 268.42 ± 75.82 (87.29-561.22 μg L^-1), respectively. The C_avg. of Co and Hg exceeded the WHO and NSLs. The non-CAR risk assessment was used to order the TMs according to the total target hazard quotient (TTHQ) As > Pb > Cr > Co > Zn > Hg > Ni > Cd. None of the investigated age groups are at risk As there is a low C_avg of all trace metals (i.e., the THQ is > 1). The age groups were ranked based on THQ and incremental lifetime cancer risk (ILCR) As < 1 year, >1-10 years, > 11-19 years, and > + 20 years. The ILCR of As for all the age groups was >10^-4, whereas for Pb it was <10^-6. Cumulative carcinogenic risk (CCR) for As and Pb was at a safe threshold risk (>10^-4) for all the age groups.

Trimethoprim Antibiotic Adsorption from Aqueous Solution onto Eco-Friendly Zr-Metal Organic Framework Material

The synthesis of Bio-MOF using aspartic acid as an organic linker and water as a solvent was performed to create an environmentally friendly material. The chemical composition, structure, and morphology of the synthesized zirconium Bio-MOF (MIP-202) was evaluated using X-ray diffraction (XRD), energy dispersive X-ray (EDX) spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The synthesized Bio-MOF was used as an adsorbent for trimethoprim antibiotic as pollutants from an aqueous solution under various operating parameters. The increase in the initial trimethoprim concentration from 2.5 mg/L to 20 mg/L decreased the decontamination efficiency from 77.6% to 35.9% at a solution pH of 7 with 0.5 g/L adsorbent dose after 60 min reaction time. The rise of adsorbent dose from 0.1 g/L to 1.5 g/L increased the removal efficiency from 47.7% to 87.6%. The maximum trimethoprim removal efficiency of 95% was attained at a solution pH of 11. Langmuir and pseudo-second order models described the adsorption process of trimethoprim antibiotic onto zirconium Bio-MOF and the chemo-physical nature of trimethoprim adsorption onto the synthesized zirconium Bio-MOF. Accordingly, it was evident that the prepared zirconium Bio-MOF (MIP-202) is an ecofriendly and efficient adsorbent for antibiotic decontamination from polluted water.

Comparison of Water Defluoridation Using Different Techniques

Fluoride pollution in subsurface water is a significant problem for different nations across the world because of the intake of excessive fluoride caused by the drinking of the contaminated subsurface. Water pollution by flouride can be attributed to the natural and human-made agents. Increased levels of fluoride in drinking water may result in the irretrievable demineralization of bone and tooth tissues, a situation called fluorosis, and other disorders. There has long been a need for fluoride removal from drinking water to make it safe for human use. Among the various fluoride removal methods, adsorption is the method most popularly used due to its cheap cost, ease of utilization, and being a scalable and simple physical technique. According to the findings of this study, the highest concentration of fluoride (0.1–15.0 mg/L) was found in Sweden and the lowest (0.03–1.14 mg/L) in Italy. We collected the values of adsorption capacities and fluoride removal efficiencies of various types of adsorbents from valuable released data accessible in the literature and exhibited tables. There is still a need to find the actual possibility of using biosorbents and adsorbents on a commercial scale and to define the reusability of adsorbents to decrease price and the waste generated from the adsorption method. This article reviews the currently available methods and approaches to fluoride removal of water.

Meso- and macroporous silica-based arsenic adsorbents: effect of pore size, nature of the active phase, and silicon release

Arsenic pollution in ground and drinking water is a major problem worldwide due to the natural abundance of arsenic by dissolution from ground sediment or mining activities from anthropogenic activities. To overcome this issue, iron oxides as low-cost and non-toxic materials, have been widely studied as efficient adsorbents for arsenic removal, including when dispersed within porous silica supports. In this study, two head-to-head comparisons were developed to highlight the As(v)-adsorptive ability of meso- and macrostructured silica-based adsorbents. First, the role of the textural properties of a meso-(SBA15) and macrostructured (MOSF) silica support in affecting the structural-morphological features and the adsorption capacity of the active phase (Fe2O3) have been studied. Secondly, a comparison of the arsenic removal ability of inorganic (Fe2O3) and organic (amino groups) active phases was carried out on SBA15. Finally, since silica supports are commonly proposed for both environmental and biomedical applications as active phase carriers, we have investigated secondary silicon and iron pollution. The batch tests at different pH revealed better performance from both Fe2O3-composites at pH 3. The values of q m of 7.9 mg g-1 (53 mg gact -1) and 5.5 mg g-1 (37 mg gact -1) were obtained for SBA15 and MOSF, respectively (gact stands for mass of the active phase). The results suggest that mesostructured materials are more suitable for dispersing active phases as adsorbents for water treatment, due to the obtainment of very small Fe2O3 NPs (about 5 nm). Besides studying the influence of the pore size of SBA15 and MOSF on the adsorption process, the impact of the functionalization was analyzed on SBA15 as the most promising sample for As(v)-removal. The amino-functionalized SBA15 adsorbent (3-aminopropyltriethoxysilane, APTES) exhibited a q m of 12.4 mg g-1 and faster kinetics. Furthermore, issues associated with the release of iron and silicon during the sorption process, causing secondary pollution, were evaluated and critically discussed.

Various Natural and Anthropogenic Factors Responsible for Water Quality Degradation: A Review

Recognition of sustainability issues around water resource consumption is gaining traction under global warming and land utilization complexities. These concerns increase the challenge of gaining an appropriate comprehension of the anthropogenic activities and natural processes, as well as how they influence the quality of surface water and groundwater systems. The characteristics of water resources cause difficulties in the comprehensive assessment regarding the source types, pathways, and pollutants behaviors. As the behavior and prediction of widely known contaminants in the water resources remain challenging, some new issues have developed regarding heavy metal pollutants. The main aim of this review is to focus on certain essential pollutants’ discharge from anthropogenic activities categorized based on land-use sectors such as industrial applications (solid/liquid wastes, chemical compounds, mining activities, spills, and leaks), urban development (municipal wastes, land use practices, and others), and agricultural practices (pesticides and fertilizers). Further, important pollutants released from natural processes classified based on climate change, natural disasters, geological factors, soil/matrix, and hyporheic exchange in the aquatic environment, are also discussed. Moreover, this study addresses the major inorganic substances (nitrogen, fluoride, and heavy metals concentrations). This study also emphasizes the necessity of transdisciplinary research and cross-border communication to achieve sustainable water quality using sound science, adaptable legislation, and management systems.

A review on sources, identification and treatment strategies for the removal of toxic Arsenic from water system

Arsenic liberation and accumulation in the groundwater environment are both affected by the presence of primary ions and soluble organic matter. The most important influencing role in the co-occurrence is caused by human activity, which includes logging, agricultural runoff stream, food, tobacco, and fertilizers. Furthermore, it covers a wide range of developed and emerging technologies for removing arsenic impurities from the ecosystem, including adsorption, ion exchangers, bio sorption, coagulation and flocculation, membrane technology and electrochemical methods. This review thoroughly explores various arsenic toxicity to the atmosphere and the removal methods involved with them. To begin, the analysis focuses on the general context of arsenic outbreaks in the area, health risks associated with arsenic, and measuring techniques. The utilization of innovative functional substances such as graphite oxides, metal organic structures, carbon nanotubes, and other emerging types of composite materials, as well as the ease, reduced price, and simple operating method of the adsorbent material, are better potential alternatives for arsenic removal. The aim of this article is to examine the origins of arsenic, as well as identification and treatment methods. It also addressed recent advancements in Arsenic removal using graphite oxides, carbon nanotubes, metal organic structures, magnetic nano composites, and other novel types of usable materials. Under ideal conditions for the above methods, the arsenic removal will achieve nearly 99% in lab scale.

Anchoring Al- and/or Mg-oxides to magnetic biochars for Co-uptake of arsenate and fluoride from water

The co-occurrence of arsenic and fluoride in the water environment has led to many health concerns for living beings. Simultaneous removal of such ions is crucial to the safety of water resources, and biochar has been extensively engaged to address this issue. Here four magnetic biochars (mBCs) including pristine magnetic biochar and three aluminum (Al) and/or magnesium (Mg) oxides-anchored magnetic biochar (i.e., Al-mBC, Mg-mBC, and MgAl-mBC) were prepared via a facile pyrolysis method and then comprehensively evaluated as adsorbents for enhanced co-uptake of arsenate (As^V) and fluoride (F^-) from synthetic water. The mBC shows a high specific surface area of 205 m² g^-1, which dropped to 116, 80, and 114 m² g^-1 upon the anchoring of Al, Mg, and Mg + Al, respectively. Our results suggest that the adsorption of either As^V or F^- is highly pH-dependent, and pH 4-6 is the optimal range for maximum adsorption. The adsorption isotherm data indicate that the MgAl-mBC adsorbent outranks all other mBCs for co-uptake of both As^V and F^-. The adsorption capacity maxima of MgAl-mBC are 34.45, and 21.59 mg g^-1 for As^V and F^-, respectively (pH = 5, T = 10 °C), also highly outstripping other biochars reported in the literature. The magnetic feature of these mBCs enables us to fast reclaim and regenerate the exhausted adsorbents by an external magnet and dilute NaOH. The Al- and Mg-anchored mBCs are expected to be used as highly efficient adsorbents for environmental remediation of waters contaminated by both As^V and F^-.

Selective and Fast Detection of Fluoride-Contaminated Water Based on a Novel Salen-Co-MOF Chemosensor

The development of selective and fast optical sensitive chemosensors for the detection and recognition of different cations and anions in a domain is still a challenge in biological, industrial, and environmental fields. Herein, we report a novel approach for the detection and determination of fluoride ion (F-) sensing based on a salen-cobalt metal-organic framework (Co(II)-MOF). By a simple method, the Co(II)-MOF was synthesized and characterized using several tools to elucidate the structure and morphology. The photoluminescence (PL) spectrum of the Co(II)-MOF (100.0 nM/L) was examined versus different ionic species like F-, Br-, Cl-, I-, SO4 2-, and NO3 - and some cationic species like Mg2+, Ca2+, Na+, and K+. In the case of F- ions, the PL intensity of the Co(II)-MOF was scientifically enhanced with a remarkable red shift. With the increase of F- concentration, the Co(II)-MOF PL emission spectrum was also professionally enhanced. The limit of detection (LOD) for the Co(II)-MOF chemosensor was 0.24 μg/L, while the limit of quantification (LOQ) was 0.72 μg/L. Moreover, a comparison of the Co(II)-MOF optical approach with other published reports was studied, and the mechanism of interaction was also investigated. Additionally, the applicability of the current Co(II)-MOF approach in different real water samples, such as tap water, drinking water, Nile River water, and wastewater, was extended. This easy-to-use future sensor provides reliable detection of F- in everyday applications for nonexpert users, especially in remote rural areas.

Removal of decidedly lethal metal arsenic from water using metal organic frameworks: a critical review

Water contamination is worldwide issue, undermining whole biosphere, influencing life of a large number of individuals all over the world. Water contamination is one of the chief worldwide danger issues for death, sickness, and constant decrease of accessible drinkable water around the world. Among the others, presence of arsenic, is considered as the most widely recognized lethal contaminant in water bodies and poses a serious threat not exclusively to humans but also towards aquatic lives. Hence, steps must be taken to decrease quantity of arsenic in water to permissible limits. Recently, metal-organic frameworks (MOFs) with outstanding stability, sorption capacities, and ecofriendly performance have empowered enormous improvements in capturing substantial metal particles. MOFs have been affirmed as good performance adsorbents for arsenic removal having extended surface area and displayed remarkable results as reported in literature. In this review we look at MOFs which have been recently produced and considered for potential applications in arsenic metal expulsion. We have delivered a summary of up-to-date abilities as well as significant characteristics of MOFs used for this removal. In this review conventional and advanced materials applied to treat water by adsorptive method are also discussed briefly.

Arsenic exposure from groundwater: environmental contamination, human health effects, and sustainable solutions

Arsenic (As) occurs naturally in geologic conditions, but groundwater contamination might also be found due to the consequences of mining, agricultural and industrial processes. Human exposure to As after drinking contaminated water is commonly associated with acute toxicity outcomes and chronic effects ranging from skin lesions to cancer. Integrated actions from environmental and health authorities are needed to reduce exposure, monitoring outcomes, and promotion of actions to offer sustainable As-safe water alternatives. Considering recent research trends, the present review summarizes and discusses current issues associated with the process and effects of contamination and decontamination in an environmental health perspective. Recent findings reinforce the harmful effects of the consumption of As-contaminated water and broaden the scope of related diseases including intestinal maladies, type 2 diabetes, cancers of bladder, kidneys, lung, and liver. Among the main strategies to diminish or remove As from water, the following are highlighted (1) ion exchange system and membrane filtration (micro, ultra, and nanofiltration) as physicochemical treatment systems; (2) use of cyanobacteria and algae in bioremediation programs and (3) application of nanotechnology for water treatment.

Experimental and modeling studies for adsorbing different species of fluoride using lanthanum-aluminum perovskite

We investigated the adsorption mechanisms for removing fluoride based on experimental and modeling studies. Lanthanum-aluminum perovskite was designed for treating wastewater contaminated by fluoride. A fluorine-species model was developed to calculate the concentrations of different species of fluorine: F^-, HF, HF₂^-. Multiple kinetic models were examined and the pseudo-second order model was found the best to fit the experimental data, implying fast-chemisorption. The thermodynamic data were fitted by the Langmuir model and Freundlich model at different temperatures, indicating heterogeneous adsorption at low temperature and homogeneous adsorption at high temperature. The La₂Al₄O₉ material had less influence from negative ions when adsorbing fluoride. The adsorption mechanisms were further studied using experiments and Density Functional Theory calculations. The adsorption experiments could be attributed to the lattice plane (1 2 1) and La, O, Al sites. More Al sites were required than La sites for the increase of fluoride concentration. By contrast, more La sites than Al sites were needed for increased pH.

Metal–organic framework micromotors: perspectives for environmental applications

Metal–organic framework micromotors possessing a self-propulsion system have been proposed as a new generation of advanced materials for various environmental applications.

Arsenic adsorbent derived from the ferromanganese slag

Arsenic-contaminated groundwater has a severe negative impact on the health of living beings. Groundwater majorly contains arsenite (As(III)) as well as arsenate (As(V)). Among these two, the arsenite species are more carcinogenic, mobile, and lethal. Hence, it is more difficult to remove by conventional water treatment methods. Ferromanganese slag, waste generated from steel industries, has been utilized in this study for the development of arsenic adsorbent. A chemical treatment method is applied to the ferromanganese slag to prepare efficient arsenic adsorbent, and it is easy to scale up. An adsorbent with the capacity for simultaneous oxidation of As(III) and adsorption of total arsenic species can be efficient for arsenic decontamination. X-ray photoelectron spectroscopy and X-ray absorption near edge spectra techniques prove the As(III) oxidation capability of the developed material is about 70 ± 5% based on initial As(III) concentration. The adsorbent not only oxidizes the As(III) species but also adsorbs both the arsenic species. The Langmuir isotherm model estimates the maximum adsorption capacities at the equilibrium concentration of 10 μg/L are 1.010 ± 0.004 mg/g and 1.614 ± 0.006 mg/g for As(III) and As(V), respectively. The rate of adsorption of As(III) was higher compared to the As(V), which was confirmed by the pseudo-second-order kinetic model. Therefore, the treated water quality meets the World Health Organization and Indian drinking water standards.