Analysis of recycled rubber: Development of an analytical method and determination of polycyclic aromatic hydrocarbons and heterocyclic aromatic compounds in rubber matrices

Recycled tire rubber materials in the spotlight. Determination of hazardous and lethal substances

One way of recycling end-of-life tires is by shredding them to obtain crumb rubber, a microplastic material (<0.5 mm), used as infill in artificial turf sports fields or as playground flooring. There is emerging concern about the health and environmental consequences that this type of surfaces can cause. This research aims to develop an analytical methodology able to determine 11 compounds of environmental and health concern, including antiozonants such as N-1,3-dimethylbutyl-N'-phenyl-p-phenylenediamine (6PPD) or N, N´-diphenyl-1,4-phenylenediamine (DPPD), and vulcanization and crosslinking agents, such as N-cyclohexylbenzothiazole-2-sulfenamide (CBS), 1,3-di-o-tolylguanidine (DTG) or hexamethoxymethylmelamine (HMMM) from tire rubber. Ultrasound assisted extraction followed by liquid chromatography coupled to tandem mass spectrometry (UAE-LC-MS/MS) is validated demonstrating suitability. The methodology is applied to monitor the target compounds in forty real crumb rubber samples of different origin including, football pitches, outdoor and indoor playgrounds, urban pavements, commercial samples, and tires. Several alternative infill materials, such as sand, cork granulates, thermoplastic elastomers and coconut fibres, are also collected and analysed. All the target analytes are identified and quantified in the crumb rubber samples. The antiozonant 6PPD is present at the highest concentrations up to 0.2 % in new synthetic fields. The tire rubber-derived chemical 6PPD-quinone (2-((4-methylpentan-2-yl)amino)-5-(phenylamino)cyclohexa-2,5-diene-1,4-dione), recently linked to acute mortality in salmons, is found in all types of crumb rubber samples attaining concentrations up to 40 μg g-1 in football pitches. The crosslinking agent HMMM is detected in most of the playing surfaces, at concentrations up to 36 μg g-1. The tested infill alternatives are free of most of the target compounds. To the best of our knowledge, this study is the largest study considering the target compounds in tire rubber particles and the first to focus on these compounds in playgrounds including the analysis of HMMM, 6PPD-quinone and DTG in crumb rubber used as an infill material.

High enrichment and measurement of heterocyclic aromatic hydrocarbons from environmental waters with magnetic resorcinol-formaldehyde nanocomposites coupled with high performance liquid chromatography

Heterocyclic aromatic hydrocarbons are concerned pollutants with carcinogenic toxicity, which exist universally in various environmental matrices and have great harm to environmental and human health. In present work, magnetic resorcinol-formaldehyde composites (Fe3O4@SiO2@R-F) were fabricated via aldol condensation reaction under alkaline condition. The prepared magnetic materials were examined and analyzed with Fourier transform infrared spectroscopy and other related instruments. The Fe3O4@SiO2@R-F composites were utilized to develop an efficient magnetic solid phase extraction (MSPE) method for extracting six heteropolyclic aromatic hydrocarbons from environmental water samples including carbazole (CB), 7-methylquinoline (7-MQL), 9-methylcarbazole (9-MCB), dibenzothiophene (DBT), 4-methyldibenzothiophene (4-MDBT), and 4,6-dimethyldibenzothiophene (4,6-DMDBT). The analytes were analyzed by high performance liquid chromatography-ultraviolet variable wavelength detector (HPLC-VWD). The main factors affecting MSPE were optimized. With the optimal parameters, 9-MCB and 4-MDBT have good linearity over the concentration range of 0.1-300 μg L-1, and 7-MQL, CB, DBT and 4,6-DMDBT have good linearity over the concentration range of 0.5-300 μg L-1. The limits of detection were over the concentration range of 0.012-0.031 μg L-1. This method was successfully employed to measure real waters, and the spiked recoveries ranged from 89.4% to 99.9%. The results confirmed that the developed method was reliable, robust and could be employed as a usefully alternate way for analyzing such pollutants in waters.

Where the rubber meets the road: Emerging environmental impacts of tire wear particles and their chemical cocktails

About 3 billion new tires are produced each year and about 800 million tires become waste annually. Global dependence upon tires produced from natural rubber and petroleum-based compounds represents a persistent and complex environmental problem with only partial and often-times, ineffective solutions. Tire emissions may be in the form of whole tires, tire particles, and chemical compounds, each of which is transported through various atmospheric, terrestrial, and aquatic routes in the natural and built environments. Production and use of tires generates multiple heavy metals, plastics, PAH's, and other compounds that can be toxic alone or as chemical cocktails. Used tires require storage space, are energy intensive to recycle, and generally have few post-wear uses that are not also potential sources of pollutants (e.g., crumb rubber, pavements, burning). Tire particles emitted during use are a major component of microplastics in urban runoff and a source of unique and highly potent toxic substances. Thus, tires represent a ubiquitous and complex pollutant that requires a comprehensive examination to develop effective management and remediation. We approach the issue of tire pollution holistically by examining the life cycle of tires across production, emissions, recycling, and disposal. In this paper, we synthesize recent research and data about the environmental and human health risks associated with the production, use, and disposal of tires and discuss gaps in our knowledge about fate and transport, as well as the toxicology of tire particles and chemical leachates. We examine potential management and remediation approaches for addressing exposure risks across the life cycle of tires. We consider tires as pollutants across three levels: tires in their whole state, as particulates, and as a mixture of chemical cocktails. Finally, we discuss information gaps in our understanding of tires as a pollutant and outline key questions to improve our knowledge and ability to manage and remediate tire pollution.

Tracking Aromatic Amines from Sources to Surface Waters

This review examines the environmental occurrence and fate of aromatic amines (AAs), a group of environmental contaminants with possible carcinogenic and mutagenic effects. AAs are known to be partially responsible for the genotoxic traits of industrial wastewater (WW), and AA antioxidants are acutely toxic to some aquatic organisms. Still, there are gaps in the available data on sources, occurrence, transport, and fate in domestic WW and indoor environments, which complicate the prevention of adverse effects in aquatic ecosystems. We review key domestic sources of these compounds, including cigarette smoke and grilled protein-rich foods, and their presence indoors and in aquatic matrices. This provides a basis to evaluate the importance of nonindustrial sources to the overall environmental burden of AAs. Appropriate sampling techniques for AAs are described, including copper-phthalocyanine trisulfonate materials, XAD resins in solid-phase extraction, and solid-phase microextraction methods, which can offer insights into AA sources, transport, and fate. Further discussion is provided on potential progress in the research of AAs and their behavior in an aim to support the development of a more comprehensive understanding of their effects and potential environmental risks.

Calixarenes and cyclodextrins as off- and on-fluorescence probes for carbazole

Absorption and fluorescence spectra of the nitrogen polycyclic aromatic hydrocarbon carbazole (CZL) were analyzed with native cyclodextrins (CD;α,β,γ); derivatizedCD(hydroxypropyl-β-cyclodextrin,HPCD; methyl-β-cyclodextrin,MeCD) and p-sulfonated calixarenes (SCAn, with n = 6 and 8) macrocycles. The results showed a slight increase in the absorbance ofCZLwithCD, but the mixture ofCZLwithSCAshowed lower absorption than the sum of the individual spectra. Also, changes in fluorescence were observed by adding the macrocycles, quenching withSCA, and significant increases withCD. The higher fluorescence enhancement was withHPCDrationalized as a complex formation with 1:1 stoichiometry, with an average value for the association constant (KA) of (12 ± 1) x 102M-1, and a quantum yield ratio between the complexedCZLand freeCZL(ΦCZL-HPCD/ΦCZL) of (1.56 ± 0.02) at neutral pH and 25.0 °C. These increases in fluorescence were used as an on-fluorescence switch to develop a supramolecular analytical method forCZLin aqueous samples. The best analytical parameters were inHPCD(LOD = 1.41 ± 0.01 ng mL-1). The method was validated in aqueous samples of river and tap water with recoveries between 96%-104%. The proposed supramolecular method is quick, direct, selective and represents an alternative and low-cost analysis method.

Characteristics of the pyrolytic products and the pollutant emissions at different operating stages from a pilot waste tire pyrolysis furnace

Pyrolysis is considered a highly practical, cost-effective, and environment-friendly technology for waste tires disposal. In this study, pyrolysis processes of waste tires were conducted in a pilot scale furnace feeding at 30 kg/h. The properties of pyrolytic products and the distribution patterns of pollutants generated in different operating stages (start-up, steady, and shut-down) were investigated. The pyrolytic gas in the steady state had a high caloric value of 10799 kJ/Nm3, valuable as heating source for pyrolysis. The elements of sulfur and zinc were effectively fixed as ZnS in the pyrolytic carbon. The basic properties of pyrolytic oil were in line with commercial diesel oil except for the lower flash point. Heavy metals were mainly concentrated in the pyrolytic carbon, with slightly higher concentrations in the steady state. Moreover, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were mainly concentrated in the pyrolytic oil, with predominated low-ring PAHs and high chlorinated PCDD/Fs. The concentrations of PAHs and PCDD/Fs in the gas phase were higher during the start-up stage due to the memory effect, whereas were effectively reduced during the steady stage. The concentration of PAHs in the solid phase was highest during the furnace start-up and lowest in the shut-down stage. In contrast to PAHs, the PCDD/Fs in the solid phase reached their highest concentration during the shut-down stage, which was mainly affected by temperature. The results provide guidance for the reducing of pollutant emissions and the recycling of pyrolytic products.

Are volatile methylsiloxanes in downcycled tire microplastics? Levels and human exposure estimation in synthetic turf football fields

Downcycled rubber, derived from end-of-life tires (ELTs), is frequently applied as crumb rubber (CR) as infill of synthetic turf in sports facilities. This practice has been questioned in recent years as numerous studies have reported the presence of potentially hazardous chemicals in this material. CR particles fall into the category of microplastics (MPs), making them possible vectors for emerging micropollutants. A preliminary study where volatile methylsiloxanes (VMSs) were found in CR originated the hypothesis that VMSs are present in this material worldwide. Consequently, the present work evaluates for the first time the levels and trends of seven VMSs in CR from synthetic turf football fields, while attempting to identify the main sources and impacts of these chemicals. A total of 135 CR samples and 12 other of alternative materials were analyzed, employing an ultrasound-assisted dispersive solid-phase extraction followed by gas chromatography-mass spectrometry (GC-MS), and the presence of VMSs was confirmed in all samples, in total concentrations ranging from 1.60 to 5089 ng.g-1. The levels were higher in commercial CR (before field application), a reflection of the use of VMS-containing additives in tire production and/or the degradation of silicone polymers employed in vehicles. The VMSs generally decreased over time on the turf, as expected given their volatile nature and the wearing of the material. Finally, the human exposure doses to VMSs in CR (by dermal absorption and ingestion) for people in contact with synthetic turf in football fields were negligible (maximum total exposure of 20.5 ng.kgBW-1.year-1) in comparison with the European Chemicals Agency (ECHA) reference doses: 1.35 × 109 ng.kgBW-1.year-1 for D4 and 1.83 × 109 ng.kgBW-1.year-1 for D5. Nevertheless, more knowledge on exposure through inhalation and the combined effects of all substances is necessary to provide further corroboration. This work proved the presence of VMSs in CR from ELTs, another family of chemical of concern to take into account when studying MPs as vectors of other contaminants.

Micron-size tire tread particles leach organic compounds at higher rates than centimeter-size particles: Compound identification and profile comparison

Tire tread particles (TTP) are environmentally prevalent microplastics and generate toxic aqueous leachate. We determined the total carbon and nitrogen leachate concentrations and chemical profiles from micron (∼32 μm) and centimeter (∼1 cm) TTP leachate over 12 days. Dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) were used to measure the concentration of leached compounds. Nontargeted chemical analysis by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC×GC/TOF-MS) was used to compare the chemical profiles of leachates. After leaching for 12 days, DOC was 4.0 times higher in the micron TTP leachate than in the centimeter TTP leachate, and TDN was 2.6 times higher. The total GC×GC/TOF-MS chromatographic feature peak area was 2.9 times greater in the micron TTP leachate than the centimeter TTP leachate, and similarly, the total relative abundance of 54 tentatively identified compounds was 3.3 times greater. We identified frequently measured tire-related chemicals, such as 6PPD, N-cyclohexyl-N'-phenylurea (CPU), and hexa(methoxymethyl)melamine (HMMM), but nearly 50% of detected chemicals were not previously reported in tire literature or lacked toxicity information. Overall, the results demonstrate that smaller TTP have a greater potential to leach chemicals into aquatic systems, but a significant portion of these chemicals are not well-studied and require further risk assessment.

A new look at rubber recycling and recreational surfaces: The inorganic and OPE chemistry of vulcanised elastomers used in playgrounds and sports facilities

We revisit current understanding of the chemical complexity of different kinds of particulate vulcanised elastomers widely used in playgrounds and sports fields, adding new data on trace element and organophosphate ester contents of used tyre and EDPM crumb rubber. Enrichments in elements such as Zn, S, Co, Bi and Nd relate to the vulcanised mixtures created during manufacture. Zinc concentrations vary across an order of magnitude, being highest in our used tyre particulate samples (up to 2.4 %). In contrast, other trace element variations are due to coloured pigments causing increases in Cu and Zr (blue), Cr (green), and Fe and Sn (red and yellow) concentrations. The use of pale fillers such as CaCO₃ and clay minerals (rather than carbon black) strongly influences Ca and Al concentrations, which are much higher in the coloured EPDM than in black used tyre crumb rubber. Representatives from all three of the main organophosphate ester (OPE) groups, namely chlorinated (e.g. TCEP, TCIPP, TDCPP), alkyl (e.g. TEHP, TEP, TNBP, TBOEP) and aryl (e.g. TPHP, EHDPP, TCP) were identified, confirming how these chemicals are commonly used in modern rubber compounding as flame retardants and plasticisers. Elevated concentrations of TEHP (up to 117 μg/g) in coloured-coated used tyre turf infill crumb rubbers were traced to the coating rather than the crumb rubber itself. The presence and weathering behaviour of OPEs in recreational crumb rubber materials deserve closer investigation. The ecological "onehealth" impact of potentially toxic substances present in recreational crumb rubbers will depend on if and how they are released during play and sports activities, maintenance procedures, and natural weathering. We argue that detailed chemical data on these materials should be available to buyers, as manufacturers strive to reduce ecotoxin content as part of the quest towards sustainable use and recycling of vulcanised elastomers.

Screening p-Phenylenediamine Antioxidants, Their Transformation Products, and Industrial Chemical Additives in Crumb Rubber and Elastomeric Consumer Products

Recently, roadway releases of N,N'-substituted p-phenylenediamine (PPD) antioxidants and their transformation products (TPs) received significant attention due to the highly toxic 6PPD-quinone. However, the occurrence of PPDs and TPs in recycled tire rubber products remains uncharacterized. Here, we analyzed tire wear particles (TWPs), recycled rubber doormats, and turf-field crumb rubbers for seven PPD antioxidants, five PPD-quinones (PPDQs), and five other 6PPD TPs using liquid chromatography-tandem mass spectrometry. PPD antioxidants, PPDQs, and other TPs were present in all samples with chemical profiles dominated by 6PPD, DTPD, DPPD, and their corresponding PPDQs. Interestingly, the individual [PPDQ]/[PPD] and [TP]/[PPD] ratios significantly increased as total concentrations of the PPD-derived chemical decreased, indicating that TPs (including PPDQs) dominated the PPD-derived compounds with increased environmental weathering. Furthermore, we quantified 15 other industrial rubber additives (including bonding agents, vulcanization accelerators, benzotriazole and benzothiazole derivatives, and diphenylamine antioxidants), observing that PPD-derived chemical concentrations were 0.5-6 times higher than these often-studied additives. We also screened various other elastomeric consumer products, consistently detecting PPD-derived compounds in lab stoppers, sneaker soles, and rubber garden hose samples. These data emphasize that PPD antioxidants, PPDQs, and related TPs are important, previously overlooked contaminant classes in tire rubbers and elastomeric consumer products.

Assessment of the bioaccessibility of PAHs and other hazardous compounds present in recycled tire rubber employed in synthetic football fields

Recycled tire crumb rubber (RTCR) surfaces contain harmful and carcinogenic substances, which can be ingested by the users of these facilities, mainly athletes and children. In this work, the potential in-vitro oral bioaccessibility of eighteen polycyclic aromatic hydrocarbons (PAHs) from RTCR employed as infill in synthetic football fields was studied in human synthetic body fluids (saliva, gastric, duodenal and bile), prepared according the Unified Bioaccessibility Method. Solid-phase extraction (SPE) using commercial sorbents and a new green material based on cork (cork industry by-product) were used to isolate the bioaccessible PAHs before gas chromatography-tandem mass spectrometry analysis. The method was optimized and validated attending the analytical figures of merit. The feasibility of cork biosorbent for the extraction of the compounds was demonstrated, as well as the suitability of the UBM method to perform the digestion with good precision. The application to real samples collected from football fields demonstrated the presence of 17 of the 18 target PAHs in the biofluids. Most volatile PAHs such as NAP, ACY, ACE, FLU, PHN and ANC, achieved the highest bioaccessibility percentage levels. The carcinogenic B[a]P was detected in 75 % of the samples at concentrations up to 2.5 ng g^-1 (bioaccessible fraction). Children exposure assessment was carried out to identify potential risk. Other hazardous and environmentally problematic compounds such as N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPD-quinone), recently related with the dead of coho salmon, and hexamethoxymethylmelamine (HMMM), among others, were also detected. This is the first study in which the bioaccesibility from real crumb rubber samples of 15 out of the 16 PAHs considered as priority pollutants by the United States Environmental Protection Agency (EPA) and the presence of 6PPD-quinone and HMMM in the bioaccessible fractions is reported.

Artificial turf and crumb rubber infill: An international policy review concerning the current state of regulations

BACKGROUND

Although artificial turf fields are utilized widely around the world, sufficient research has not yet been conducted to assess the potential human and environmental health risks posed by the chemicals contained in the fields' fibers, backing, and often-used crumb rubber infill. Consequently, there is wide variation in governmental policies.

OBJECTIVE

Review the notable policies concerning artificial turf and crumb rubber infill in the European Union, United Kingdom, United States of America, Canada, China, Qatar, and the Global Stockholm Convention of the United Nations.

METHODS

Information was collected that included published papers, technical and policy reports, and grey literature. These were then analyzed by a collaborative group familiar with the environmental policies in their respective countries to extract the pertinent legislative or regulatory information. The group members were primarily identified through their involvement in publications pertinent to artificial turf and crumb rubber infill health research and included environmental health professors, active researchers, and governmental agency officials. Most information on direct policies was taken directly from reports provided to the public by various governmental agencies responsible for their countries' regulations, often available within the respective agency's online archives.

RESULTS

There are significant differences in the regulatory approaches adopted by the investigated countries with regards to artificial turf and its crumb rubber infill. Some regions, such as the European Union, have taken substantial steps to limit the fields' chemical components to which the public and environment are exposed. Other regions and countries have done far less to address the issue. Most policies relate directly to (i) the fields themselves, (ii) the microplastic components of crumb rubber infill, or (iii) the concentrations of harmful polycyclic aromatic hydrocarbons (PAHs), perfluoroalkyl and polyfluoroalkyl substances (PFAS), and heavy metals.

CONCLUSION

While nearly every country acknowledges the potential health risks posed by heavy metals, microplastics, PAHs, and PFAS chemicals, very few have actually implemented artificial turf and crumb rubber infill regulations and/or established adequate surveillance measures to protect those regularly exposed to the fields.

A Long-Term Study on the Content of Polycyclic Aromatic Hydrocarbons in Rubber from End-of-Life Tires of Passenger Cars and Trucks

At the European level, limits have been set (REACH) for the content of polycyclic aromatic hydrocarbons (PAH) in products with rubber and plastic components that come into contact with human skin or the oral cavity. These limit values reported in Commission Regulation (EU) 1272/2013 are of particular importance for the utilization of end-of-life tires (ELT) as recycled rubber materials for consumer applications, but a suitable analytical method has not yet been specified. On the other hand, comprehensive measurement series of the PAH content of ELT materials are scarce in the context of compliance testing against this regulation and general published PAH levels in ELT materials are often based on very different analytical methods. In the present work, the PAH content of three different rubber granulates from ELT (obtained from whole truck and passenger car tires and truck tire treads) were investigated over a period of two years. The Grimmer method was used for PAH profile analysis, which in terms of extraction intensity and sample preparation not only meets the requirements for a reliable determination of the EU priority PAH, but in addition covers a more comprehensive PAH profile. A total of 26 different PAH compounds, including the 8 EU priority PAH (REACH) and the 16 U.S. EPA priority PAH, were analyzed and their variations over time were examined to obtain reliable current data for PAH content in rubber granulates produced from ELT.

Ground tire rubber functionalization as a promising approach for the production of sustainable adsorbents of environmental pollutants

Waste tires management and further utilization are currently one of the biggest concerns regarding the environment and human health protection. At present, shredding, grinding, or pulverization of waste tires are the most popular options for industrial recycling. Although many solutions for ground tire rubber (GTR) applications were checked and verified so far, their further implementation at an industrial scale is still very limited. In this brief review work, ground tire rubber functionalization strategies as a promising approach for the production of sustainable adsorbents of environmental pollutants were presented and discussed. Our findings indicate that suitable functionalization of GTR significantly improves adsorption capacity or selectivity of prepared GTR-based adsorbents. However, it should be mentioned that most of the performed research based on multi-step and time-consuming protocols of GTR functionalization is performed usually in the presence of solvents, which results in very low efficiency and as a consequence high-cost and limited applications. Current research trends showed that reactive extrusion can be considered as efficient, solvent-free, and pro-ecological alternative for commonly investigated periodic methods of GTR functionalization. This work shows that reactive extrusion is a promising method for further development of GTR-based adsorbents dedicated to environmental pollutants.

Formation behavior of PAHs during pyrolysis of waste tires

Polycyclic aromatic hydrocarbons (PAHs) formation from the pyrolysis of waste tires is inevitable because of the complexity of tire formulations and the addition of certain chemicals. In this study, the formation behavior and distribution of PAHs in three-phases were investigated from waste tires under pyrolysis conditions. The influencing factors including the temperature, heating rate, holding time, particle size, catalyzer, and atmosphere, were systematically evaluated. The results showed that PAHs were mainly concentrated in pyrolysis oil (94.59-99.03%), followed by the gas phase (0.96-5.34%), and their content was very low in the solid phase (0.01-0.99%). A higher temperature and slower heating rate lead to partial PAHs decomposition, thus reducing their emissions. The overall formation of PAHs can be inhibited when pyrolyzing coarse-grained tire powder. Furthermore, the PAHs formation mechanisms in waste tires were determined through reaction molecular dynamics, electron paramagnetic resonance, and intermediate products. Tires were mainly decomposed into benzene series, *C₂H₃, and *CH₃; therefore, it was determined that PAHs were formed by the joint action of the hydrogen abstraction, and vinyl radical addition and methyl addition cyclization mechanisms. Among them, low and middle-ring PAHs were formed more easily, particularly naphthalene. The generation of PAHs can be inhibited by reducing the concentration of hydrocarbons and monocyclic benzene series. Regarding the distribution law and generation pathways of PAHs, our results provide guidance for reducing PAHs formation and emissions.

Examination of aryl hydrocarbon receptor (AhR), estrogenic and anti-androgenic activities, and levels of polyaromatic compounds (PACs) in tire granulates using in vitro bioassays and chemical analysis

Tire granulates recovered from end-of-life tires contain a complex mixture of chemicals, amongst them polyaromatic compounds (PACs), of which many are recognized to be toxic and persistent in the environment. Only a few of these PACs are regularly monitored. In this study a combined approach of chemical analysis and a battery of CALUX® in vitro bioassays was used to determine PAC concentrations and estrogenic, (anti)-androgenic and aryl hydrocarbon receptor (AhR) activities in tire granulates. Tire granulates from a recycling company was analyzed for PAHs, alkyl-PAHs, oxy-PAHs and heterocyclic PACs (NSO-PACs), in total 85 PACs. The concentrations of PACs were between 42 and 144 mg/kg, with major contribution from PAHs (74-88%) followed by alkyl-PAHs (6.6-20%) and NSO-PACs (1.8-7.0%). The sum of eight priority PAHs were between 2.3 and 8.6 mg/kg, contributing with 4.7-8.2% of ∑PACs. Bioassay analysis showed presence of AhR agonists, estrogen receptor (ERα) agonists, and androgen receptor (AR) antagonists in the tire granulate samples. Only 0.8-2.4% of AhR-mediated activities could be explained by the chemical analysis. Benzo[k+j]fluoranthenes, benzo[b]fluoranthene, indeno[1,2,3-cd]pyrene, 2-methylchrysene, and 3-methylchrysene were the major contributors to the AhR-mediated activities. The high contribution (98-99%) of unknown bioactive compounds to the bioassay effects in this study raises concerns and urges for further investigations of toxicants identification and source apportionment.

Environmental Consequences of Rubber Crumb Application: Soil and Water Pollution

End-of-life tires are utilized for various purposes, including sports pitches and playground surfaces. However, several substances used at the manufacture of tires can be a source of concerns related to human health or environment’s adverse effects. In this context, it is necessary to map whether this approach has the desired effect in a broader relation. While the negative effects on human health were investigated thoroughly and legislation is currently being revisited, the impact on aquatic or soil organisms has not been sufficiently studied. The present study deals with the exposure of freshwater and soil organisms to rubber crumb using the analysis of heavy metal and polycyclic aromatic hydrocarbon concentrations. The obtained results refer to substantial concerns related to freshwater contamination specifically, since the increased concentrations of zinc (7 mg·L⁻¹) and polycyclic aromatic hydrocarbons (58 mg·kg⁻¹) inhibit the growth of freshwater organisms, Desmodesmus subspicatus, and Lemna minor in particular. The performed test with soil organisms points to substantial concerns associated with the mortality of earthworms as well. The acquired knowledge can be perceived as a roadmap to a consistent approach in the implementation of the circular economy, which brings with it a number of so far insufficiently described problems.

Global evaluation of the chemical hazard of recycled tire crumb rubber employed on worldwide synthetic turf football pitches

Social and environmental concern about the use of crumb rubber from end-of-life car tires in the construction of different sport and recreational facilities is increasing due to the presence of hazardous compounds. The aim of this research was the assessment of 42 organic chemicals, including polycyclic aromatic hydrocarbons (PAHs), phthalates, adipates, antioxidants and vulcanisation agents in a large number of infill samples (91) from synthetic turf football pitches of diverse characteristics and geographical origin. Samples were taken worldwide, in 17 countries on 4 continents, to show the global dimension of this problem. Ultrasound assisted extraction was employed to extract the target compounds, followed by gas chromatography coupled to tandem-mass spectrometry (UAE-GC-MS/MS). Seventy-eight crumb rubber samples as well as thirteen samples of alternatives materials, such as cork granulates, thermoplastic elastomers and coconut fibre, were analyzed. The results highlight the presence of all target PAH in most rubber samples at concentrations up to μg g^-1, including the eight ECHA (European Chemicals Agency) PAHs considered as carcinogenic, and anthracene (ANC), pyrene (PYR) and benzo[ghi]perylene (B[ghi]P), catalogued as substances of very high concern (SVHC). Endocrine disruptors such as some plasticizers (mainly phthalates), and other compounds like benzothiazole (BTZ) and 2-mercaptobenzothiazole (MBTZ) were found reaching the mg g^-1 level. This confirms the presence of the hazardous substances in the recycled crumb rubber samples collected all around the world. Three crumb rubber samples exceeded the limit of 20 μg g^-1 for the sum of the eight ECHA PAHs. Regarding the chemical composition of other infill alternatives, cork appears to be adequate, while the thermoplastic elastomers contained high levels of some plasticizers. In addition, the plastic infill as well as the crumb rubber both are microplastics. Microplastics are considered contaminants of emerging concern since they do not biodegrade and remain in the environment for a long time.

Ground Tire Rubber Modified by Elastomers via Low-Temperature Extrusion Process: Physico-Mechanical Properties and Volatile Organic Emission Assessment

In this paper, low-temperature extrusion of ground tire rubber was performed as a pro-ecological waste tires recycling method. During this process, ground tire rubber was modified with constant content of dicumyl peroxide and a variable amount of elastomer (in the range: 2.5–15 phr). During the studies, three types of elastomers were used: styrene-butadiene rubber, styrene-ethylene/butylene-styrene grafted with maleic anhydride and ethylene-octene copolymer. Energy consumption measurements, curing characteristics, physico-mechanical properties and volatile organic compounds emitted from modified reclaimed GTR were determined. The VOCs emission profile was investigated using a passive sampling technique, miniature emission chambers system and static headspace analysis and subsequently quantitative or qualitative analysis by gas chromatography. The VOCs analysis showed that in the studied conditions the most emitted volatile compounds are dicumyl peroxide decomposition by-products, such as: α-methylstyrene, acetophenone, α-cumyl alcohol, methyl cumyl ether, while the detection level of benzothiazole (devulcanization “marker”) was very low. Moreover, it was found that the mechanical properties of the obtained materials significantly improved with a higher content of styrene-butadiene rubber and styrene-ethylene/butylene-styrene grafted with maleic anhydride while the opposite trend was observed for ethylene-octene copolymer content.

Mechanical insight into the formation of H2S from thiophene pyrolysis: The influence of H2O

The thermal utilization of waste rubber is accompanied by the release of sulfur, and the release of H₂S to the gas phase is one of the crucial issues. In this work, density functional theory (DFT) calculations and wave function analysis were employed to explore the possible formation pathways of H₂S and its precursor (·SH radical) during the pyrolysis of thiophene in the presence of H₂O. It indicates that H₂O affects the decomposition of thiophene and the formation of H₂S in two patterns. First, H₂O can participate in the hydrogen transfer process by acting as a catalyst or generating weak hydrogen bonds with thiophene. In this way, the hydrogen transfer reactions are promoted with lower energy barriers, and thus the formation of H₂S is facilitated by H₂O without changing the pyrolysis pathways. Secondly, H₂O can saturate the thiophene ring by addition reactions and alter the generation pathways of H₂S significantly. The energy barriers can be decreased with one or two CC bonds of thiophene being saturated. The completely saturated thiophene results in a greater decline of the overall energy barriers for H₂S formation. H₂O provides the H atom for H₂S in the second pattern. Due to the combination of the two influence patterns, the release of H₂S can be promoted greatly in the presence of H₂O. The present study aims to lay a foundation for the clean thermal utilization of thiophene/rubber and to inspire the advance of desulfurization techniques.