Graphene-based nanomaterials in the electroplating industry: A suitable choice for heavy metal removal from wastewater

Removal of Heavy Metals from Wastewaters and Other Aqueous Streams by Pressure-Driven Membrane Technologies: An Outlook on Reverse Osmosis, Nanofiltration, Ultrafiltration and Microfiltration Potential from a Bibliometric Analysis

A bibliometric study to analyze the scientific documents released until 2024 in the database Scopus related to the use of pressure-driven membrane technologies (microfiltration, ultrafiltration, nanofiltration and reverse osmosis) for heavy metal removal was conducted. The work aimed to assess the primary quantitative attributes of the research in this field during the specified period. A total of 2205 documents were identified, and the corresponding analysis indicated an exponential growth in the number of publications over time. The contribution of the three most productive countries (China, India and USA) accounts for more than 47.1% of the total number of publications, with Chinese institutions appearing as the most productive ones. Environmental Science was the most frequent knowledge category (51.9% contribution), followed by Chemistry and Chemical Engineering. The relative frequency of the keywords and a complete bibliometric network analysis allowed the conclusion that the low-pressure technologies (microfiltration and ultrafiltration) have been more deeply investigated than the high-pressure technologies (nanofiltration and reverse osmosis). Although porous low-pressure membranes are not adequate for the removal of dissolved heavy metals in ionic forms, the incorporation of embedded adsorbents within the membrane structure and the use of auxiliary chemicals to form metallic complexes or micelles that can be retained by this type of membrane are promising approaches. High-pressure membranes can achieve rejection percentages above 90% (99% in the case of reverse osmosis), but they imply lower permeate productivity and higher costs due to the required pressure gradients.

Data-driven approaches linking wastewater and source estimation hazardous waste for environmental management

Industrial enterprises are major sources of contaminants, making their regulation vital for sustainable development. Tracking contaminant generation at the firm-level is challenging due to enterprise heterogeneity and the lack of a universal estimation method. This study addresses the issue by focusing on hazardous waste (HW), which is difficult to monitor automatically. We developed a data-driven methodology to predict HW generation using wastewater big data which is grounded in the availability of this data with widespread application of automatic sensors and the logical assumption that a correlation exists between wastewater and HW generation. We created a generic framework that used representative variables from diverse sectors, exploited a data-balance algorithm to address long-tail data distribution, and incorporated causal discovery to screen features and improve computation efficiency. Our method was tested on 1024 enterprises across 10 sectors in Jiangsu, China, demonstrating high fidelity (R² = 0.87) in predicting HW generation with 4,260,593 daily wastewater data.

Effects of chronic Cr and Ni co-exposure on liver inflammation and autophagy in mice by regulating the TLR4/mTOR pathway

Exposure to Cr and/or Ni can have widespread implications on the environment and health. However, the specific toxic effects of chronic Cr and Ni co-exposure on mice liver have not been reported. To ascertain the combined toxic effects of chronic Cr and Ni co-exposure on liver damage in mice, 80 6-week-old female C57BL/6 J mice were randomly divided into 4 groups: the Con group, Cr group (Cr+6 50 mg/L), Ni group (Ni+2 110 mg/L), and Cr + Ni group (Cr+6 50 mg/L + Ni+2 110 mg/L). The trial period lasted for 16 weeks. The results showed that Cr+6 and/or Ni+2 increased liver weight and liver index (P < 0.05) in mice, caused histological abnormality and ultrastructural damage, and micronutrients imbalance in mice liver. These findings serve as the basis for subsequent experiments. Compared with the individual exposure group, chronic Cr and Ni co-exposure resulted in decreased levels and activities of ALT, AST, MDA, T-AOC, and T-SOD (P < 0.05) in liver tissue, and decreased the mRNA expression levels of the TLR4/mTOR pathway related factors (TLR4, TRAM, TRIF, TBK-1, IRF-3, MyD88, IRAK-4, TRAF6, TAK-1, IKKβ, NF-κB, IL-1β, IL-6, TNFα, ULK1, Beclin 1, LC3) (P < 0.05) and decreased the protein expression levels of the factors (TLR4, MyD88, TRAF6, NF-κB p50, IL-6, TNFα, ULK1, LC3II/LC3I) (P < 0.05). Moreover, factorial analysis revealed the interaction between Cr and Ni, which was manifested as antagonistic effects on Cr concentration, Ni concentration, and TLR4, MyD88, NF-κB, mTOR, LC3, and p62 mRNA expression levels. In conclusion, the TLR4/mTOR pathway as a mechanism through which chronic Cr and Ni co-exposure induce liver inflammation and autophagy in mice, and there was an antagonistic effect between Cr and Ni. The above results provided a theoretical basis for understanding the underlying processes.

Optimization of fenugreek seed mucilage extraction for the synthesis of a novel bio-nano composite for efficient removal of cadmium ions from aqueous environments

This research investigates the application of an innovative bio-nanocomposite, Fenugreek seed mucilage/silicon carbide (FSM/SiC), as an exceptionally effective adsorbent for eliminating cadmium ions from aqueous solutions. Optimization of fenugreek mucilage extraction involved ultrasonic methods, establishing ideal conditions with a solid-to-solvent ratio of 1:55, 50 °C temperature, 37 kHz frequency, 100 % power, and 30 min processing time. Comprehensive characterization through FTIR spectroscopy, XRD, imaging, DLS, and SEM confirmed the preservation of crucial adsorption-related characteristics. Enhanced adsorption efficiency was achieved by systematically adjusting pH, temperature, adsorbent concentration, pollutant concentration, and contact time, identifying optimal conditions at pH 6, 0.03 g adsorbent dosage, 35 min contact time, and 30 mg/L initial cadmium concentration at 30 °C. Adsorption kinetics followed a pseudo-second-order model, while the Langmuir isotherm fit suggested monolayered adsorption. Thermodynamic analysis indicated exothermic and spontaneous Cd2+ ion adsorption onto FSM/SiC. Remarkably, FSM/SiC demonstrated exceptional regeneration potential, positioning it as a promising solution for water decontamination and environmental remediation. This research showcases FSM/SiC's potential with a maximum adsorption capacity of 41.6 mg/g for cadmium ions, highlighting its significance in addressing cadmium contamination.

Utilization of biochar for remediation of heavy metals in aqueous environments: A review and bibliometric analysis

Biochar usage for removing heavy metals from aqueous environments has emerged as a promising research area with significant environmental and economic benefits. Using the PICO approach, the research question aimed to explore using biochar to remove heavy metals from aqueous media. We merged the data from Scopus and the Web of Science Core Collection databases to acquire a comprehensive perspective of the subject. The PRISMA guidelines were applied to establish the search parameters, identify the appropriate articles, and collect the bibliographic information from the publications between 2010 and 2022. The bibliometric analysis showed that biochar-based heavy metal remediation is a research field with increasing scholarly attention. The removal of Cr(VI), Pb(II), Cd(II), and Cu(II) was the most studied among the heavy metals. We identified five main clusters centered on adsorption, water treatment, adsorption models, analytical techniques, and hydrothermal carbonization by performing keyword co-occurrence analysis. Trending topics include biochar reusability, modification, acid mine drainage (AMD), wastewater treatment, and hydrochar. The reutilization of heavy metal-loaded spent biochar includes transforming it into electrodes for supercapacitors or stable catalyst materials. This study provides a comprehensive overview of biochar-based heavy metal remediation in aquatic environments and highlights knowledge gaps and future research directions.

Adsorption of Sb(III) and Pb(II) in wastewater by magnetic γ-Fe2O3-loaded sludge biochar: Performance and mechanisms

Magnetically modified carbon-based adsorbent (BC@γ-Fe2O3) was prepared through facile route using activated sludge biomass and evaluated for the simultaneous removal of Sb(III) and Pb(II). BC@γ-Fe2O3 exhibited outstanding Sb(III) and Pb(II) adsorption capacity when 200 mg of adsorbent was employed at pH 5.0 for 240 min, with the removal efficiency higher than 90%. The experiments demonstrated the excellent reusability and the potent anti-interference properties of the prepared absorbent. Freundlich and pseudo-second-order kinetic were prior to describe the adsorption process. The adsorption of Sb(III) and Pb(II) onto BC@γ-Fe2O3 was spontaneous and endothermic. BC@γ-Fe2O3 with high specific surface area revealed the exceptional competence to absorb Sb(III) and Pb(II) through pore filling, electrostatic adsorption and complexation. The adsorption mechanisms of Sb(III) and Pb(II) showed similarities with slight disparities. The removal of Sb(III) involved the Fe-O-Sb bond and π-π bond, while the adsorption of Pb(II) was closely related to ion exchange. Moreover, Sb(III) was oxidized to Sb(V) in a minor part during adsorption. The Fe-O-Cl active sites on BC allowed for the binding of γ-Fe2O3, guaranteeing the abundant adsorption sites and stability. BC@γ-Fe2O3 provides an efficient and green insight into the simultaneous removal of complex heavy metals with promising application in wastewater treatment.

Advances, challenges, and prospects in microalgal-bacterial symbiosis system treating heavy metal wastewater

Heavy metal (HM) pollution, particularly in its ionic form in water bodies, is a chronic issue threatening environmental security and human health. The microalgal-bacterial symbiosis (MABS) system, as the basis of water ecosystems, has the potential to treat HM wastewater in a sustainable manner, with the advantages of environmental friendliness and carbon sequestration. However, the differences between laboratory studies and engineering practices, including the complexity of pollutant compositions and extreme environmental conditions, limit the applications of the MABS system. Additionally, the biomass from the MABS system containing HMs requires further disposal or recycling. This review summarized the recent advances of the MABS system treating HM wastewater, including key mechanisms, influence factors related to HM removal, and the tolerance threshold values of the MABS system to HM toxicity. Furthermore, the challenges and prospects of the MABS system in treating actual HM wastewater are analyzed and discussed, and suggestions for biochar preparation from the MABS biomass containing HMs are provided. This review provides a reference point for the MABS system treating HM wastewater and the corresponding challenges faced by future engineering practices.

Heavy-metal tolerant bacterial strains isolated from industrial sites and scrap yards in Kashmir, India

Heavy metal pollution has posed a severe danger to environmental stability due to its high toxicity and lack of biodegradability. The present study deals with the appraisement of tolerance shown by various bacteria in varied copper and iron concentrations. Among the 20 isolates, four isolates, GN2, SC5, SC8, and SC10, exhibiting more significant iron and copper tolerance, were selected and identified by 16 S ribosomal ribonucleic acid (rRNA) gene sequence analysis as Pantoea agglomerans strain GN2, Pantoea sp. strain SC5, Bacillus sp. strain SC8 and Priestia aryabhattaistrain SC10. The minimum inhibitory concentration of molecularly identified strains revealed that P. agglomerans strain GN2 showed tolerance to iron sulfate and copper sulfate upto 600 and 400 µg/mL, whereas Bacillus sp. SC8 (OQ202165) showed tolerance of 700 and 250 µg/mL were tolerant to iron sulfate and copper sulfate up to 700 and 150 µg/mL, respectively. Pantoea sp. strain SC5 showed significant tolerance to both heavy metals. The isolates were further studied for their ability to grow at varying temperatures and pH ranges. Most of the isolates showed optimal growth at 37°C and pH 7. However, Pantoea sp. SC5 was competent to have prominent growth at 45°C and pH 8.0. Microbial remediation, which is eco-friendly, has proven the most effective method for bioremediation of heavy metal-contaminated environments. Using heavy metal-resistant bacteria for microbial remediation of iron and copper-contaminated environments could be a viable and valuable strategy. These isolates could also be used to decontaminate heavy metal-polluted agricultural soils.

Kinetic and equilibrium study of graphene and copper oxides modified nanocomposites for metal ions adsorption from binary metal aqueous solution

Presently, the main cause of pollution of natural water resources is heavy metal ions. The removal of metal ions such as nickel (Ni2+) and cadmium (Cd2+) has been given considerable attention due to their health and environmental risks. In this regard, for wastewater treatment containing heavy metal ions, graphene oxide (GO) nanocomposites with metal oxide nanoparticles (NPs) attained significant importance. In this study, graphene oxide stacked with copper oxide nanocomposites (GO/CuO-NCs) were synthesized and characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and atomic force microscopy (AFM) analytical procedures. The prepared GO/CuO-NCs were applied for the removal of Ni2+ and Cd2+ ions from a binary metal ion system in batch and continuous experiments. The obtained results revealed that GO/CuO-NCs exhibited the highest removal efficiencies of Ni2+ (89.60% ± 2.12%) and Cd2+ (97.10% ± 1.91%) at the optimum values of pH: 8, dose: 0.25 g, contact time: 60 min, and at 50 ppm initial metal ion concentration in a batch study. However, 4 mL/min flow rate, 50 ppm initial concentration, and 2 cm bed height were proved to be the suitable conditions for metal ion adsorption in the column study. The kinetic adsorption data exhibited the best fitting with the pseudo-second-order model. The adsorption isotherm provided the best-fitting data in the Langmuir isotherm model. This study suggested that the GO/CuO nanocomposites have proved to be efficient adsorbents for Ni2+ and Cd2+ ions from a binary metal system.

Graphene oxide worsens copper-mediated embryo-larval toxicity in the pacific oyster while reduced graphene oxide mitigates the effects

Due to their properties, graphene-based nanomaterials (GBMs) are triggering a great interest leading to an increase of their global production and use in new applications. As a consequence, their release into the environment is expected to increase in the next years. When considering the current knowledge in the evaluation of GBMs ecotoxic potential, studies aiming to evaluate the hazard associated to these nanomaterials towards marine species and particularly considering potential interactions with other environmental pollutants such as metals are scarce. Here we evaluated the embryotoxic potential of GBMs, which include graphene oxide (GO) and its reduced form (rGO), both individually and in combination with copper (Cu) as a referent toxicant, towards early life stages of the Pacific oyster through the use of a standardized method (NF ISO 17244). We found that following exposure to Cu, dose-dependent decrease in the proportion of normal larvae was recorded with an Effective Concentration leading to the occurrence of 50% of abnormal larvae (EC₅₀) of 13.85 ± 1.21 μg/L. Interestingly, the presence of GO at a non-toxic dose of 0.1 mg/L decreased the Cu EC₅₀ to 12.04 ± 0.85 μg/L while it increased to 15.91 ± 1.57 μg/L in presence of rGO. Based on the measurement of copper adsorption, the obtained results suggest that GO enhances Cu bioavailability, potentially modifying its toxic pathways, while rGO mitigates Cu toxicity by decreasing its bioavailability. This research underscores the need to characterize the risk associated to GBMs interactions with other aquatic contaminants and supports the adoption of a safer-by-design strategy using rGO in marine environments. This would contribute to minimize the potential adverse effects on aquatic species and to reduce the risk for economic activities associated to coastal environments.

Parametric optimization of hexavalent chromium removal by electrocoagulation technology with vertical rotating cylindrical aluminum electrodes using Taguchi and ANN model

This study aims to evaluate the performance of rotating aluminum electrodes in the electrocoagulation reactor for removing hexavalent chromium (Cr6+) from synthetic tannery wastewater. Taguchi and Artificial Neural Network (ANN) based models were developed to obtain the optimum condition for maximum Cr6+ removal. The optimum working condition obtained by Taguchi approach for the maximum Cr6+ removal (94%) was: Initial Cr6+ concentration (Cr6+ i) = 15 mg/L; Current Density (CD) = 14.25 mA/cm2; Intial pH = 5; Rotational Speed of Electrode (RSE) = 70 rpm. In contrast, the optimal condition for maximum Cr6+ ions removal (98.83%) obtained from the BR-ANN model was: Cr6+ i = 15 mg/L; CD = 14.36 mA/cm2; pHi = 5.2; RSE = 73 rpm. Compared to the Taguchi model, the BR-ANN model outperformed in terms of providing higher Cr6+ removal (+ 4.83%); reduced energy demand (-0.035 KWh/gm Cr6+ remove); lower error function value (χ2 = -7.9674 and RMSE = -3.5414); and highest R2 value (0.9991). The data for the conditions 91,007 < Re < 227,517 and Sc = 102.834 were found to fit the equation for the initial Cr6+ concentration of 15 mg/l; Sh = 3.143Re0.125 Sc0.33. The Cr6+ removal kinetics was best described by Pseudo 2nd Order model, as validated by high R2 and lower error functions value. The SEM and XRF analysis confirmed that Cr6+ was adsorbed and precipitated along with metal hydroxide sludge. The rotating electrode led to lower SEEC (10.25 kWh/m3), as well as maximum Cr6+ removal (98.83%), compared to EC process with stationary electrodes.

Facile synthesis and characterization of Fe3O4/analcime nanocomposite for the efficient removal of Cu(II) and Cd(II) ions from aqueous media

In the water purification field, heavy metal pollution is a problem that causes severe risk aversion. This study aimed to examine the disposal of cadmium and copper ions from aqueous solutions by a novel Fe3O4/analcime nanocomposite. A field emission scanning electron microscope (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction were used to characterize the synthesized products. The FE-SEM images showed that the analcime and Fe3O4 samples consist of polyhedral and quasi-spherical shapes with average diameters of 923.28 and 28.57 nm, respectively. Besides, the Fe3O4/analcime nanocomposite consists of polyhedral and quasi-spherical shapes with average diameters of 1100.00 nm. The greatest uptake capability of the Fe3O4/analcime nanocomposite toward the copper and cadmium ions is 176.68 and 203.67 mg/g, respectively. The pseudo-second-order kinetic model and Langmuir equilibrium isotherm best describe the uptake of copper and cadmium ions using the Fe3O4/analcime nanocomposite. The uptake of copper and cadmium ions using the Fe3O4/analcime nanocomposite is exothermic and chemical in nature.

Aquatic Bacteria Rheinheimera tangshanensis New Ability for Mercury Pollution Removal

To explore the strong tolerance of bacteria to Hg pollution, aquatic Rheinheimera tangshanensis (RTS-4) was separated from industrial sewage, with a maximum Hg(II) tolerant concentration of 120 mg/L and a maximum Hg(II) removal rate of 86.72 ± 2.11%, in 48 h under optimum culture conditions. The Hg(II) bioremediation mechanisms of RTS-4 bacteria are as follows: (1) the reduction of Hg(II) through Hg reductase encoded by the mer operon; (2) the adsorption of Hg(II) through the production of extracellular polymeric substances (EPSs); and (3) the adsorption of Hg(II) using dead bacterial biomass (DBB). At low concentrations [Hg(II) ≤ 10 mg/L], RTS-4 bacteria employed Hg(II) reduction and DBB adsorption to remove Hg(II), and the removal percentages were 54.57 ± 0.36% and 45.43 ± 0.19% of the total removal efficiency, respectively. At moderate concentrations [10 mg/L < Hg(II) ≤ 50 mg/L], all three mechanisms listed above coexisted, with the percentages being 0.26 ± 0.01%, 81.70 ± 2.31%, and 18.04 ± 0.62% of the total removal rate, respectively. At high concentrations [Hg(II) > 50 mg/L], the bacteria primary employed EPS and DBB adsorption to remove Hg(II), where the percentages were 19.09 ± 0.04% and 80.91 ± 2.41% of the total removal rate, respectively. When all three mechanisms coexisted, the reduction of Hg(II) occurred within 8 h, the adsorption of Hg(II) by EPSs and DBB occurred within 8-20 h and after 20 h, respectively. This study provides an efficient and unused bacterium for the biological treatment of Hg pollution.

SPECIFIC ION EFFECTS ON COPPER ELECTROPLATING

The main goal of this work is to open new perspectives in the field of electrodeposition and provide green alternatives to the electroplating industry. The effect of different anions (SO₄^2-, ClO₃^-, NO₃^-, ClO₄^-, BF₄^-, PF₆^-) in solution on the electrodeposition of copper was investigated. The solutions, containing only the copper precursor and the background electrolyte, were tailored to minimize the environmental impact and reduce the use of organic additives and surfactants. The study is based on electrochemical measurements carried out to verify that no metal complexation takes place. We assessed the nucleation and growth mechanism, we performed a morphological characterization through scanning electron microscopy and deposition efficiency by measuring the film thickness through X-ray fluorescence spectroscopy. Significant differences in the growth mechanism and in the morphology of the electrodeposited films, were observed as a function of the background electrolyte.

Two dimensional (2D) materials and biomaterials for water desalination; structure, properties, and recent advances

BACKGROUND

An efficient solution to the global freshwater dilemma is desalination. MXene, Molybdenum Disulfide (MoS₂), Graphene Oxide, Hexagonal Boron Nitride, and Phosphorene are just a few examples of two-dimensional (2D) materials that have shown considerable promise in the development of 2D materials for water desalination. However, other promising materials for desalinating water are biomaterials. The benefits of bio-materials are their wide distribution, lack of toxicity, and superior capacity for water desalination.

METHODS

For the rational use of water and the advancement of sustainable development, it is of the utmost importance to research 2D-dimensional materials and biomaterials that are effective for water desalination. The scientific community has concentrated on wastewater remediation using bio-derived materials, such as nanocellulose, chitosan, bio-char, bark, and activated charcoal generated from plant sources, among the various endeavors to enhance access to clean water. Moreover, the 2D-materials and biomaterials may have ushered in a new age in the production of desalination materials and created a promising future.

RESULTS

The present review article focuses on and reviews the progress of 2D materials and biomaterials for water desalination. Their properties, surface, and structure, combined with water desalination applications, are highlighted. Further, the practicability and potential future directions of 2D materials and biomaterials are proposed. Thus, the current work provides information and discernments for developing novel 2D materials and biomaterials for wastewater desalination. Moreover, it aims to promote the contribution and advancement of materials for water desalination, fabrication, and industrial production.

A Critical Review of Snail Shell Material Modification for Applications in Wastewater Treatment

Sea material is becoming increasingly popular and widely used as an adsorbent in wastewater treatment. Snail shell, a low-cost and natural animal waste material, has been shown to have a high calcium content (>99%) and a large potential surface area for the development of sustainable adsorbents. This paper presents a novel synthesis of methods for using snail shell absorbent materials in the treatment of wastewater containing heavy metals, textile dyes, and other organic substances. Modified biochar made from snail shells has gained popularity in recent years due to its numerous benefits. This paper discusses and analyzes modification methods, including impregnating with supplements, combining other adsorbents, synthesis of hydroxyapatite, co-precipitation, and the sol-gel method. The analysis of factors influencing adsorption efficiency revealed that pH, contact time, temperature, initial concentration, and adsorbent dose all have a significant impact on the adsorption process. Future research directions are also discussed in this paper as a result of presenting challenges for current snail adsorbents.

Green synthesis of graphene-based metal nanocomposite for electro and photocatalytic activity; recent advancement and future prospective

The presence of pollutants in waste water is a demanding problem for human health. Investigations have been allocated to study the adsorptive behavior of graphene-based materials to remove pollutants from wastewater. Graphene (GO) due to its hydrophilicity, high surface area, and oxygenated functional groups, is an effective adsorbent for the removal of dyes and heavy metals from water. The disclosure of green synthesis opened the gateway for the economic productive methods. This article reveals the fabrication of graphene-based composite from aloe vera extract using a green method. The proposed mechanism of GO reduction via plant extract has also been mentioned in this work. The mechanism associated with the removal of dyes and heavy metals by graphene-based adsorbents and absorptive capacities of heavy metals has been discussed in detail. The toxicity of heavy metals has also been mentioned here. The Polyaromatic resonating system of GO develops significant π-π interactions with dyes whose base form comprises principally oxygenated functional groups. This review article illustrates a literature survey by classifying graphene-based composite with a global market value from 2010 to 2025 and also depicts a comparative study between green and chemical reduction methods. It presents state of art for the fabrication of GO with novel adsorbents such as metal, polymer, metal oxide and elastomers-based nanocomposites for the removal of pollutants. The current progress in the applications of graphene-based composites in antimicrobial, anticancer, drug delivery, and removal of dyes with photocatalytic efficacy of 73% is explored in this work. It gives a coherent overview of the green synthesis of graphene-based composite, various prospective for the fabrication of graphene, and their biotoxicity.

Sodium Alginate/β-Cyclodextrin Reinforced Carbon Nanotubes Hydrogel as Alternative Adsorbent for Nickel(II) Metal Ion Removal

Water pollution issues, particularly those caused by heavy metal ions, have been significantly growing. This paper combined biopolymers such as sodium alginate (SA) and β-cyclodextrin (β-CD) to improve adsorption performance with the help of calcium ion as the cross-linked agent. Moreover, the addition of carbon nanotubes (CNTs) into the hybrid hydrogel matrix was examined. The adsorption of nickel(II) was thoroughly compared between pristine sodium alginate/β-cyclodextrin (SA-β-CD) and sodium alginate/β-cyclodextrin immobilized carbon nanotubes (SA-β-CD/CNTs) hydrogel. Both hydrogels were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) spectral analysis, field emission scanning electron microscopy (FESEM), electron dispersive spectroscopy (EDX), thermogravimetric analysis (TGA) and Brunauer-Emmett-Teller (BET) surface area analysis. The results showed SA-β-CD/CNTs hydrogel exhibits excellent thermal stability, high specific surface area and large porosity compared with SA-β-CD hydrogel. Batch experiments were performed to study the effect of several adsorptive variables such as initial concentration, pH, contact time and temperature. The adsorption performance of the prepared SA-β-CD/CNTs hydrogel was comprehensively reported with maximum percentage removal of up to 79.86% for SA-β-CD/CNTs and 69.54% for SA-β-CD. The optimum adsorption conditions were reported when the concentration of Ni(II) solution was maintained at 100 ppm, pH 5, 303 K, and contacted for 120 min with a 1000 mg dosage. The Freundlich isotherm and pseudo-second order kinetic model are the best fits to describe the adsorption behavior. A thermodynamic study was also performed. The probable interaction mechanisms that enable the successful binding of Ni(II) on hydrogels, including electrostatic attraction, ion exchange, surface complexation, coordination binding and host-guest interaction between the cationic sites of Ni(II) on both SA-β-CD and SA-β-CD/CNTs hydrogel during the adsorption process, were discussed. The regeneration study also revealed the high efficiency of SA-β-CD/CNTs hydrogel on four successive cycles compared with SA-β-CD hydrogel. Therefore, this work signifies SA-β-CD/CNTs hydrogel has great potential to remove Ni(II) from an aqueous environment compared with SA-β-CD hydrogel.

Preparation and Application of Graphene–Based Materials for Heavy Metal Removal in Tobacco Industry: A Review

Heavy metals are nondegradable in the natural environment and harmful to the ecological system and human beings, causing an increased environmental pollution problem. It is required to remove heavy metals from wastewater urgently. Up until now, various methods have been involved in the heavy metal removals, such as chemical precipitation, chemical reduction, electrochemical, membrane separation, ion exchange, biological, and adsorption methods. Among them, adsorption by graphene–based materials has attracted much more attentions for the removal of heavy metals from wastewater systems in recent years, arising due to their large specific surface area, high adsorption capacity, high removal efficiency, and good recyclability. Therefore, it is quite important to review the heavy metal removal with the graphene–based material. In this review, we have summarized the physicochemical property and preparation methods of graphene and their adsorption property to heavy metals. The influencing parameters for the removal of heavy metals by graphene–based materials have been discussed. In addition, the modification of graphene–based materials to enhance their adsorption capability for heavy metal removal is also reviewed. The heavy metal removal by modified graphene–based materials in the tobacco industry has been especially described in detail. Finally, the future trend for graphene–based materials in the field of heavy metal wastewater treatment is proposed. This knowledge will have great impacts on the field and facilitate the researchers to seek the new functionalization method for graphene–based materials with high adsorption capacity to heavy metals in the tobacco industry in the future.

Pollution characteristics of soil heavy metals around two typical copper mining and beneficiation enterprises in Northwest China

In order to investigate the situation of heavy metal pollution in the heavy metal industry in Gansu Province, a large copper mining province, two large and typical copper mining and beneficiation enterprises with differences in topographic features, climatic conditions, and soil types were selected as the target of this study based on similar ore types and beneficiation processes. Around these two enterprises, geochemical baselines of the six heavy metals were established, while the degree of local soil heavy metal pollution and potential hazards to humans were assessed based on statistical analysis, single-factor and multi-factor index analysis, and health risk evaluation models. In addition, Spearman's correlation analysis and hierarchical cluster analysis were used to explore the intrinsic association between each heavy metal in the two mining industries to reveal the pattern of soil heavy metal pollution in the copper mining and beneficiation industry and to propose targeted measures to improve and prevent soil heavy metal pollution. The results showed that the heavy metal pollution in the soil around Shengxi Mining Co., Ltd. of Subei County (SX enterprise) was higher than that around Yangba Copper Co., Ltd. of Gansu Province (YB enterprise), but the two enterprises had similar patterns of pollution, with an overall medium level of pollution. The carcinogenic and non-carcinogenic risks for children and adults were within acceptable limits for both enterprises. Besides, the correlation between the different heavy metals to similarity in their sources of contamination and the different degrees of association between the soil heavy metals of the two enterprises due to their environmental characteristics.

Synthesis of Functionalized Carboxylated Graphene Oxide for the Remediation of Pb and Cr Contaminated Water

With the growing scarcity of water, the remediation of water polluted with heavy metals is the need of hour. The present research work is aimed to address this problem by adsorbing heavy metals ions (Pb (II) and Cr (VI)) on modified graphene oxide having an excess of carboxylic acid groups. For this, graphene oxide (GO) was modified with chloroacetic acid to produce carboxylated graphene oxide (GO-COOH). The successful synthesis of graphene oxide and its modification has been confirmed using Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray Diffraction (XRD), Scanning electron microscopy (SEM), Energy Dispersive X-ray Analysis (EDX) and Transmission electron microscopy (TEM). The increase in surface area of graphene oxide after treatment with chloroacetic acid characterized by BET indicated its successful modification. A batch experiment was conducted to optimize the different factors affecting adsorption of both heavy metals on GO-COOH. After functionalization, we achieved maximum adsorption capacities of 588.23 mg g^-1 and 370.37 mg g^-1 for Pb and Cr, respectively, by GO-COOH which were high compared to the previously reported adsorbents of this kind. The Langmuir model (R² = 0.998) and Pseudo-second-order kinetic model (R² = 0.999) confirmed the monolayer adsorption of Pb and Cr on GO-COOH and the chemisorption as the dominant process governing adsorption mechanism. The present work shows that the carboxylation of GO can enhance its adsorption capacity efficiently and may be applicable for the treatment of wastewater.

Graphene oxide-based nanomaterials for the treatment of pollutants in the aquatic environment: Recent trends and perspectives - A review

Graphene oxide can be used to store energy, as electrodes and purify industrial and domestic wastewater as photocatalysts and adsorbents because of its remarkable thermal, electrical, and chemical capabilities. Toward understanding graphene oxide (GO) based nanomaterials considering the background factors, the present review study investigated their characteristics, preparation methods, and characterization processes. The removal of contaminants from wastewater has recently been a focus of attention for materials based on GO. Progress in GO synthesis and surface modification has shown that they can be used to immobilize enzymes. It is possible to immobilize enzymes with varying characteristics on graphene-oxide-based substrates without sacrificing their functioning, thus developing a new environmental remediation platform utilizing nano biocatalysts. GO doping and co-doping with a variety of heterogeneous semiconductor-based metal oxides were included in a brief strategy for boosting GO efficiency. A high band-gap material was also explored as a possibility for immobilization, which shifts the absorption threshold to the visible range and increases photoactivity. For water treatment applications, graphene-based nanomaterials were used in Fenton reactions, photocatalysis, ozonation, photo electrocatalysis, photo-Fenton, and a combination of photon-Fenton and photocatalysis. Nanoparticles made from GO improved the efficiency of composite materials when used for their intended applications. As a result of the analysis, prospects and improvements are clear, especially when it comes to scaling up GO-based wastewater treatment technologies.