Research advances of the phosphorus-accumulating organisms of Candidatus Accumulibacter, Dechloromonas and Tetrasphaera: Metabolic mechanisms, applications and influencing factors

Versatile enhancement for anaerobic moving bed biofilm (AnMBBR) treating pretreated landfill leachate by hydrochar: Energy recovery, greenhouse gas emission reduction and underlying microbial mechanisms

Hydrochars were prepared from fruit peels (HC-1) and vegetable waste (HC-2), and combined with fiber spheres, respectively, to form homogeneous biocompatible carriers, which were used for anaerobic moving bed biofilm reactor (AnMBBR) to enhance anaerobic digestion (AD) performance and energy recovery of landfill leachate treatment. Compared with the control AnMBBR with conventional fiber spheres as carriers, the chemical oxygen demand (COD) removal efficiency of the AnMBBR with HC-2 increased from 75 % to 88 %, methane yield increased from 77.7 mL/g-COD to 155.3 mL/g-COD, and achieved greenhouse gases (GHG) emission reductions of 1.74 t CO2 eq/a during long-term operation. HC-2-fiber sphere biocarriers provided more sites for attached-growth biomass (AGBS) and significantly enhanced the abundance of functional microbial community, with the relative abundance of methanogenic bacteria Methanothrix increased from 0.03 % to over 24.4 %. Moreover, the gene abundance of most the key enzymes encoding the hydrolysis, acidogenesis and methanogenesis pathways were up-regulated with the assistance of HC-2. Consequently, hydrochar-assisted AnMBBR were effective to enhance methanogenesis performance, energy recovery and carbon reduction for high-strength landfill leachate treatment.

Porous red mud ceramsite for aquatic phosphorus removal: Application in constructed wetlands

Red mud (RM) and spent oyster mushroom substrate (SOMS), by-products of industrial and agricultural production, can be recycled for polluted freshwater purification, bringing about a win-win situation. In this study, unacidified RM and RM acidified with oxalic acid (O-RM) and hydrochloric acid (H-RM), respectively, were mixed with SOMS to produce a porous ceramsite as a potential constructed wetlands (CWs) substrate. The results showed that the O-RM, H-RM, and RM ceramsites displayed fine compressive strengths of 7.75 ± 1.14, 8.40 ± 1.30, and 8.84 ± 0.69 MPa after calcining at 950 °C for 30 min, respectively. The phosphorus adsorption capacities of H-RM, O-RM, and RM ceramsite at a solid-liquid ratio of 25 g/L were 1.18 mg/g, 0.88 mg/g, and 1.06 mg/g, respectively. Toxicity release experiments showed that the ceramsites did not cause secondary environmental pollution, except for arsenic (ranging from 0.210 to 0.238 mg/L). The H-RM ceramsite was tested in a tidal flow-vertical flow CW (TF-VFCW) with Iris pseudacorus L. and Canna indica L plants. In the TF-VFCW, the average chemical oxygen demand (COD), ammonia nitrogen (NH4+-N), total nitrogen (TN), and total phosphorus (TP) removal rates were 81.01, 90.25, 66.90, and 77.32 %, respectively. Plant growth had less impact on COD and NH4-N removal but had greater limited TN and TP removal. Scanning electron microscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction analysis confirmed that acid pretreatment and the incorporation of SOMS significantly increased the surface and interior porous structures of the ceramsite and enhanced phosphate adsorption by the polyhydroxyl aluminum-iron complex ions. Bacteroides and Campylobacter used the energy produced during polyhydroxyalkanoic acid (PHA) catabolism to absorb phosphorus. Therefore, the synergistic effect of the substrate, plants, and microorganisms achieved the removal of phosphorus from CWs and offered effective and environmentally friendly recycling of RM and SOMS.

In-Situ Algal Control by Two-stage Nanobubble Technology in Taihu Lake: Efficacy and Ecological Impact

Hydrodynamic cavitation and ozone nanobubble-coupled hydrodynamic cavitation have demonstrated effective algae control in laboratories, but their in-situ potential, especially impact on nutrient salt degradation and microbial communities remain unclear. This study applied two-stage nanobubble technology, combining hydrodynamic cavitation and ozone nanobubbles, in a 3300 m2 semi-enclosed area of Taihu Lake to address these gaps. Results show that the technology efficiently controls algae, reduces odors, improves anaerobic conditions, and lowers ammonia nitrogen. Over 20 days, chlorophyll-a concentration reduced by 77.46% and cyanobacterial phycocyanin by 89.47%. Additionally, the concentrations of 2-MIB, GSM, and DMTS fell below threshold values. Notably, the relative abundance of Cyanobacteria in sediment dropped from 8.53% in the control area to only 1.59% ∼ 3.65% in the experimental area. The technology also achieved a significant reduction in ammonia nitrogen, with removal efficiencies of 78.53% in the water column and 39.17% in sediments, though the removal of total phosphorus was limited. Furthermore, the two-stage nanobubble system enhanced the abundance of nitrogen-cycling microorganisms and genes in the water, while promoting nitrogen- and phosphorus-related microbial communities in sediments and inhibiting the cyanobacteria-associated genus Cyanobium PCC-6307. Thus, Two-stage nanobubble technology can be employed for in-situ algal control in aquatic ecosystems.

Deep insights into the assembly mechanisms, co-occurrence patterns, and functional roles of microbial community in wastewater treatment plants

The understanding of activated sludge microbial status and roles is imperative for improving and enhancing the performance of wastewater treatment plants (WWTPs). In this study, we conducted a deep analysis of activated sludge microbial communities across five compartments (inflow, effluent, and aerobic, anoxic, anaerobic tanks) over temporal scales, employing high-throughput sequencing of 16S rRNA amplicons and metagenome data. Clearly discernible seasonal patterns, exhibiting cyclic variations, were observed in microbial diversity, assembly, co-occurrence network, and metabolic functions. Notably, summer samples exhibited higher α-diversity and were distinctly separated from winter samples. Our analysis revealed that microbial community assembly is influenced by both stochastic processes (66%) and deterministic processes (34%), with winter samples demonstrating more random assembly compared to summer. Co-occurrence patterns were predominantly mutualistic, with over 96% positive correlations, and summer networks were more organized than those in winter. These variations were significantly correlated with temperature, total phosphorus and sludge volume index. However, no significant differences were found among microbial community across five compartments in terms of β diversity. A core community of keystone taxa was identified, playing key roles in eight nitrogen and eleven phosphorus cycling pathways. Understanding the assembly mechanisms, co-occurrence patterns, and functional roles of microbial communities is essential for the design and optimization of biotechnological treatment processes in WWTPs.

Microbial nitrogen cycling in Microcystis colonies and its contribution to nitrogen removal in eutrophic Lake Taihu, China

Cyanobacterial blooms induced by excessive loadings of nitrogen (N) and other nutrients are a severe ecological problem in aquatic ecosystems. Previous studies of N removal have primarily focused on sediment-water interface, yet the role of cyanobacterial colonies has recently been attracting more research attention. In this study, N cycling processes were quantified for cyanobacterial colonies (primarily Microcystis colonies) and their contribution to N removal was estimated for a large, shallow eutrophic lake in China, Lake Taihu. Various N cycling processes were determined via stable 15N isotope, together with 16S rRNA gene sequencing and quantitative microbial element cycling (QMEC) chip. Denitrification was found to be the most prominent process, estimated to be 36.63, 9.85, 3.35, and 3.15 times higher than dissimilatory nitrate reduction to ammonium (DNRA), nitrification, ammonium (NH4+) uptake and nitrate (NO3-) uptake rates, respectively. Denitrifiers accounted for a large part of the bacterial taxa (35.50 ± 24.65%), and the nirS gene was the most abundant among N cycling-related genes, with (2.54 ± 0.51) × 109 copies g-1Microcystis colonies. A field investigation revealed a positive correlation between the potential denitrification rate and the Chl-a concentration (mostly derived from Microcystis colonies). Based on a multiple stepwise regression model and historical data from 2007 to 2015 for Lake Taihu, the total amount of N removed via denitrification by Microcystis colonies was estimated at 171.72 ± 49.74 t yr-1; this suggests that Microcystis colonies have played an important role in N removal in Lake Taihu since the drinking water crisis in 2007. Overall, this study revealed the importance of denitrification within Microcystis colonies for N removal in eutrophic lakes, like Lake Taihu.

Biological Decline of Alfalfa Is Accompanied by Negative Succession of Rhizosphere Soil Microbial Communities

The growth and biological decline of alfalfa may be linked to the rhizosphere microbiome. However, plant-microbe interactions in the rhizosphere of alfalfa and associated microbial community variations with stand age remain elusive. This study explored the successional pattern of rhizosphere microbial communities across different aged alfalfa stands and its relationship with alfalfa decline. Rhizosphere soils were collected from 2- and 6-year-old alfalfa stands. Control soils were collected from interspaces between alfalfa plants in the same stands. Soil bacterial and fungal communities were characterized by 16S and ITS rRNA gene sequencing, respectively. Specific microbial taxa colonized the rhizosphere soils, but not the control soils. The rhizosphere-specific taxa mainly included potentially beneficial genera (e.g., Dechloromonas, Verrucomicrobium) in the young stand and harmful genera (e.g., Peziza, Campylocarpon) in the old stand. Alfalfa roots regulated soil microbial communities by selective promotion or inhibition of distinct taxa. The majority of time-enriched taxa were reported as harmful fungi, whose relative abundances were negatively correlated with plant traits. Time-depleted taxa were mostly known as beneficial bacteria, which had relative abundances positively correlated with plant traits. The relative abundances of functional bacterial genes associated with vancomycin biosynthesis, zeatin biosynthesis, and amino acid metabolism trended lower in rhizosphere soils from the old stand. An upward trend was observed for fungal pathogens and wood saprotrophs with increasing stand age. The results suggest that root activity drives the negative succession of rhizosphere microbial communities during alfalfa decline in old stands.

Recovery of phosphorus from chemical-enhanced phosphorus removal sludge: Influence of sodium sulfide dosage on phosphorus fractionation, sludge dewaterability, and struvite product

Despite the potential of sodium sulfide (Na2S) for phosphorus (P) recovery from iron-phosphate waste, the underlying mechanism regarding its impact on P conversion and product quality has not been well addressed. In this study, the effects of Na2S addition on P release and recovery from a chemical-enhanced phosphorus removal (CEPR) sludge during anaerobic fermentation were systematically investigated. The results revealed that the effective mobilization of P bound to Fe (Fe-P) by Na2S dominated the massive P release from the CEPR sludge, while the organic P (OP) release was not significantly enhanced during anaerobic fermentation. Due to the rapid reaction of Na2S with Fe-P and the prevention of Fe(II)-P precipitation by excess S2-, the Fe-P was decreased by 9.7%, 15.2% and 24.9% at S:Fe molar ratios of 0.3, 0.5 and 1, respectively. After anaerobic fermentation, the released P mainly existed as soluble phosphate (SP), P bound to Ca (Ca-P) and P bound to Al (Al-P). The nitrogen and P contents in the fermentation supernatant significantly increased with higher S:Fe ratios, facilitating the efficient recovery of P as high-purity struvite. However, the increased Na2S dosage deteriorated the sludge dewaterability because of the dissolution of hydrophilic extracellular polymeric substances and the looser secondary structure of proteins. Comprehensively considering the P recovery, sludge dewaterability and economic cost, the optimal Na2S dosage was determined at the S:Fe ratio of 0.3. These findings provide novel insights into the role of Na2S in P recovery as struvite from CEPR sludge.

Demystifying polyphosphate-accumulating organisms relevant to wastewater treatment: A review of their phylogeny, metabolism, and detection

Currently, the most cost-effective and efficient method for phosphorus (P) removal from wastewater is enhanced biological P removal (EPBR) via polyphosphate-accumulating organisms (PAOs). This study integrates a literature review with genomic analysis to uncover the phylogenetic and metabolic diversity of the relevant PAOs for wastewater treatment. The findings highlight significant differences in the metabolic capabilities of PAOs relevant to wastewater treatment. Notably, Candidatus Dechloromonas and Candidatus Accumulibacter can synthesize polyhydroxyalkanoates, possess specific enzymes for ATP production from polyphosphate, and have electrochemical transporters for acetate and C4-dicarboxylates. In contrast, Tetrasphaera, Candidatus Phosphoribacter, Knoellia, and Phycicoccus possess PolyP-glucokinase and electrochemical transporters for sugars/amino acids. Additionally, this review explores various detection methods for polyphosphate and PAOs in activated sludge wastewater treatment plants. Notably, FISH-Raman spectroscopy emerges as one of the most advanced detection techniques. Overall, this review provides critical insights into PAO research, underscoring the need for enhanced strategies in biological phosphorus removal.

Isolation and optimisation of polyphosphate accumulating bacteria for bio-treatment of phosphate from industrial wastewater

Phosphorus in wastewater influents is a global issue. Controlling eutrophic water is crucial. Biological phosphorus removal is an economically and environmentally sustainable method for removing phosphorus from wastewater. This study aims to isolate and improve the capacity of aerobic phosphorus-removing bacteria to reduce excessive phosphate concentrations in the environment. Only three out of fourteen bacterial isolates demonstrated the highest phosphate removal efficiency using Toluidine blue-O. Klebsiella pneumoniae 6A, Klebsiella quasipneumoniae 6R, and Enterobacter mori 8R were isolated from activated sludge and identified by 16srRNA. In a single-factor experiment, the effect of incubation periods, phosphate concentrations, carbon sources, sodium acetate concentrations, temperature, pH, and irradiation dosages were studied. Seventy-two hours of incubation, 55 mg/L PO4, sodium acetate as the carbon source, 30°C and pH 7 resulted in maximum phosphorus removal. After optimising the parameters, the removal efficiency of Klebsiella pneumoniae 6A, Klebsiella quasipneumoniae 6R, and Enterobacter mori 8R increased from 73.5% to 85.1%, 79.1% to 98.1%, and 80.6% to 91.9%, respectively. Gamma irradiation showed significant results only in Klebsiella pneumoniae 6A where 100 Gy increased the phosphorous removal efficiency from 85.1% to 100%. Immobilised mixed culture of the three strains adapted better to 100 mg/L Phosphorus than pure cells. Therefore, this technique holds great new promise for phosphorus-contaminated sites bioremediation.

Electrogenerated singlet oxygen and reactive chlorine species enhancing volatile fatty acids production from co-fermentation of waste activated sludge and food waste: The key role of metal oxide coated electrodes

Electrochemical pretreatment (EPT) has shown to be superior in improving acidogenic co-fermentation (Co-AF) of waste activated sludge (WAS) and food waste (FW) for volatile fatty acids (VFAs). However, the influence of EPT electrode materials on the production of electrogenerated oxidants (such as singlet oxygen (1O2) and reactive chlorine species (RCS)), as well as their effects on properties of electrodes, the microbial community structure and functional enzymes remain unclear. Therefore, this study investigated the effects of various metal oxide coated electrodes (i.e., Ti/PbO2, Ti/Ta2O5-IrO2, Ti/SnO2-RuO2, and Ti/IrO2-RuO2) on EPT and subsequent Co-AF of WAS-FW. The results showed that EPT with Ti/PbO2, Ti/Ta2O5-IrO2, Ti/SnO2-RuO2 and Ti/IrO2-RuO2 electrodes generated 165.3-848.2 mg Cl2/L of RCS and 5.643 × 1011-3.311 × 1012 spins/mm3 of 1O2, which significantly enhanced the solubilization and biodegradability of WAS-FW by 106.4 %-233.6 % and 177.3 %-481.8 %, respectively. Especially with Ti/Ta2O5-IrO2 as the electrode material, an appropriate residual RCS (2.0-10.4 mg Cl2/L) remained in Co-AF step, resulted in hydrolytic and acidogenic bacteria (e.g., Prevotella_7, accounting for 78.9 %) gradually become dominant rather than methanogens (e.g., Methanolinea and Methanothrix) due to their different tolerance to residual RCS. Meanwhile, the functional gene abundances of hydrolytic and acidogenic enzymes increased, while the methanogenic enzymes deceased. Consequently, this reactor produced the highest VFAs up to 545.5 ± 36.0 mg COD/g VS, which was 101.8 % higher than that of the Control (without EPT). Finally, the economic analysis and confirmatory experiments further proved the benefits of WAS-FW Co-AF with EPT.

Refractory degradable dissolved organic matter (R-DOM) driving nitrogen removal by the electric field coupled iron‑carbon biofilter (E-ICBF): Performance and microbial mechanisms

Researches on the advanced nitrogen (N) removal of municipal tailwater always overlooked the value of refractory degradable dissolved organic matter (R-DOM). In this study, a novel electric field coupled iron‑carbon biofilter (E-ICBF) was utilized to explore the performance and microbial changes with polyethylene glycol (PEG) as the representative R-DOM. Results demonstrated that the removal efficiencies of E-ICBF for nitrate nitrogen (NO3--N), ammonia nitrogen (NH4+-N), and total nitrogen (TN) improved by 28.76 %, 12.96 %, and 28.45 %, compared to quartz sand biofilter (SBF). Moreover, removal efficiencies of NO3--N and TN in E-ICBF with R-DOM went up by 12.11 % and 14.02 % compared to methanol. Additionally, both PEG and the electric field reduced the microbial richness and diversity. However, PEG promoted the increase of denitrifying bacteria abundance including unclassified_f_Comamonadaceae, Thauera, and unclassified_f_Gallionellaceae. The electric field improved the abundances of genes related to N removal (hao, nasC, nasA, nifH, nifD, nifK) and PEG further enhanced the effect. The abundances of key enzymes [EC:1.7.5.1], [EC:1.7.2.1], [EC:1.7.2.4], and [EC:1.7.2.5] decreased due to the addition of PEG and the electric field mitigated the negative influence. Additionally, the electric field changed relationships between microorganisms and pollutant removal, and improved interspecific relationships between denitrifying bacterial genera and other genera in E-ICBF.

Relating the carbon sources to denitrifying community in full-scale wastewater treatment plants

Carbon source is a key factor determining the denitrifying effectiveness and efficiency in wastewater treatment plants (WWTPs). Whereas, the relationships between diverse and distinct denitrifying communities and their favorable carbon sources in full-scale WWTPs were not well-understood. This study performed a systematic analysis of the relationships between the denitrifying community and carbon sources by using 15 organic compounds from four categories and activated sludge from 8 full-scale WWTPs. Results showed that, diverse denitrifying bacteria were detected with distinct relative abundances in 8 WWTPs, such as Haliangium (1.98-4.08%), Dechloromonas (2.00-3.01%), Thauera (0.16-1.06%), Zoogloea (0.09-0.43%), and Rhodoferax (0.002-0.104%). Overall, acetate resulted in the highest denitrifying activities (1.21-4.62 mg/L/h/gMLSS), followed by other organic acids (propionate, butyrate and lactate, etc.). Detectable dissimilatory nitrate reduction to ammonium (DNRA) was observed for all 15 carbon sources. Methanol and glycerol resulted in the highest DRNA. Acetate, butyrate, and lactate resulted in the lowest DNRA. Redundancy analysis and 16S cDNA amplicon sequencing suggested that carbon sources within the same category tended to correlate to similar denitrifiers. Methanol and ethanol were primarily correlated to Haliangium. Glycerol and amino acids (glutamate and aspartate) were correlated to Inhella and Sphaerotilus. Acetate, propionate, and butyrate were positively correlated to a wide range of denitrifiers, explaining the high efficiency of these carbon sources. Additionally, even within the same genus, different amplicon sequence variants (ASVs) performed distinctly in terms of carbon source preference and denitrifying capabilities. These findings are expected to benefit carbon source formulation and selection in WWTPs.

Integrated genomics provides insights into the evolution of the polyphosphate accumulation trait of Ca. Accumulibacter

Candidatus Accumulibacter, a prominent polyphosphate-accumulating organism (PAO) in wastewater treatment, plays a crucial role in enhanced biological phosphorus removal (EBPR). The genetic underpinnings of its polyphosphate accumulation capabilities, however, remain largely unknown. Here, we conducted a comprehensive genomic analysis of Ca. Accumulibacter-PAOs and their relatives within the Rhodocyclaceae family, identifying 124 core genes acquired via horizontal gene transfer (HGT) at its least common ancestor. Metatranscriptomic analysis of an enrichment culture of Ca. Accumulibacter revealed active transcription of 44 of these genes during an EBPR cycle, notably including the polyphosphate kinase 2 (PPK2) gene instead of the commonly recognized polyphosphate kinase 1 (PPK1) gene. Intriguingly, the phosphate regulon (Pho) genes showed minimal transcriptions, pointing to a distinctive fact of Pho dysregulation, where PhoU, the phosphate signaling complex protein, was not regulating the high-affinity phosphate transport (Pst) system, resulting in continuous phosphate uptake. To prevent phosphate toxicity, Ca. Accumulibacter utilized the laterally acquired PPK2 to condense phosphate into polyphosphate, resulting in the polyphosphate-accumulating feature. This study provides novel insights into the evolutionary emergence of the polyphosphate-accumulating trait in Ca. Accumulibacter, offering potential advancements in understanding the PAO phenotype in the EBPR process.

Cultivation of phosphate-accumulating biofilm: Study of the effects of acyl-homoserine lactones (AHLs) and cyclic dimeric guanosine monophosphate (c-di-GMP) on the formation of biofilm and the enhancement of phosphate metabolism capacity

This study investigated the mechanisms of microbial growth and metabolism during biofilm cultivation in the biofilm sequencing batch reactor (BSBR) process for phosphate (P) enrichment. The results showed that the sludge discharge was key to biofilm growth, as it terminated the competition for carbon (C) source between the nascent biofilm and the activated sludge. For the tested reactor, after the sludge discharge on 18 d, P metabolism and C source utilization improved significantly, and the biofilm grew rapidly. The P concentration of the recovery liquid reached up to 157.08 mg/L, which was sufficient for further P recovery via mineralization. Meta-omics methods were used to analyze metabolic pathways and functional genes in microbial growth during biofilm cultivation. It appeared that the sludge discharge activated the key genes of P metabolism and inhibited the key genes of C metabolism, which strengthened the polyphosphate-accumulating metabolism (PAM) as a result. The sludge discharge not only changed the types of polyphosphate-accumulating organisms (PAOs) but also promoted the growth of dominant PAOs. Before the sludge discharge, the necessary metabolic abilities that were spread among different microorganisms gradually concentrated into a small number of PAOs, and after the sludge discharge, they further concentrated into Candidatus_Contendobacter (P3) and Candidatus_Accumulibacter (P17). The messenger molecule C-di-GMP, produced mostly by P3 and P17, facilitated P enrichment by regulating cellular P and C metabolism. The glycogen-accumulating organism (GAO) Candidatus_Competibacter secreted N-Acyl homoserine lactones (AHLs), which stimulated the secretion of protein in extracellular polymeric substances (EPS), thus promoting the adhesion of microorganisms to biofilm and improving P metabolism via EPS-based P adsorption. Under the combined action of the dominant GAOs and PAOs, AHLs and C-di-GMP mediated QS to promote biofilm development and P enrichment. The research provides theoretical support for the cultivation of biofilm and its wider application.

Underwater light source changes microecosystem constructed by Vallisneria spinulosa Yan for water restoration: Efficiency of water purification, characteristics of growth, and rhizosphere

Submerged macrophytes are effective in ecological restoration of water bodies polluted by nitrogen and phosphorus, and its restoration capacity depends on underwater illumination condition. This study explored the influencing mechanism of illumination on Vallisneria spinulosa Yan (V. spinulosa Yan) for water restoration. Addition of underwater light source increased the total nitrogen, ammonia nitrogen, total phosphorus, and phosphate removal loads of the V. spinulosa Yan growth system by 61.5, 39.2, 8.5, and 5.0 mg m-2 d-1, respectively. Meanwhile, the growth of V. spinulosa Yan was obviously promoted, even with high water turbidity. Although the biological nitrogen removal processes were inhibited by adding underwater light source, the growth of V. spinulosa Yan can be significantly improved, thus enhancing the efficiency of water purification via the absorption of nitrogen and phosphorus by V. spinulosa Yan. This study provides a theoretical foundation and technical support for application of submerged macrophytes in ecological water restoration.

Enhancing wastewater treatment efficiency: A hybrid technology perspective with energy-saving strategies

The study aimed to investigate how hybrid technology, combined with various intermittent aeration (IA) strategies, contributes to reducing the energy costs of wastewater treatment while simultaneously ensuring a high treatment efficiency. Even with IA subphases lasting half as long as those without aeration, and oxygen levels reduced from 3.5 to 1.5 mg O2/L, pollutants removal efficiency remains robust, allowing for a 1.41-fold reduction in energy consumption (EO). Hybrid technology led to a 1.34-fold decrease in EO, along with improved denitrification efficiency from 74.05 ± 4.71 to 81.87 ± 2.43 % and enhanced biological phosphorus removal from 35.03 ± 4.25 to 87.32 ± 3.64 %. The high nitrification efficiency may have been attributed to the abundance of Pseudomonas, Acinetobacter, and Rhodococcus, which outcompeted the genera of autotrophic nitrifying bacteria, suggesting that the hybrid system is favorable for the growth of heterotrophic nitrifiers.

Viral community distribution, assembly mechanism, and associated hosts in an industrial park wastewater treatment plant

Viruses manipulate bacterial community composition and impact wastewater treatment efficiency. Some viruses pose threats to the environment and human populations through infection. Improving the efficiency of wastewater treatment and ensuring the health of the effluent and receptor pools requires an understanding of how viral communities assemble and interact with hosts in wastewater treatment plants (WWTPs). We used metagenomic analysis to study the distribution, assembly mechanism, and sensitive hosts for the viral communities in raw water, anaerobic tanks, and returned activated sludge units of a large-scale industrial park WWTP. Uroviricota (53.42% ± 0.14%) and Nucleocytoviricota (26.1% ± 0.19%) were dominant in all units. Viral community composition significantly differed between units, as measured by β diversity (P = 0.005). Compared to raw water, the relative viral abundance decreased by 29.8% in the anaerobic tank but increased by 9.9% in the activated sludge. Viral community assembly in raw water and anaerobic tanks was predominantly driven by deterministic processes (MST <0.5) versus stochastic processes (MST >0.5) in the activated sludge, indicating that differences in diffusion limits may fundamentally alter the assembly mechanisms of viral communities between the solid and liquid-phase environments. Acidobacteria was identified as the sensitive host contributing to viral abundance, exhibiting strong interactions and a mutual dependence (degree = 59). These results demonstrate the occurrence and prevalence of viruses in WWTPs, their different assembly mechanism, and sensitive hosts. These observations require further study of the mechanisms of viral community succession, ecological function, and roles in the successive wastewater treatment units.

Partial denitrifying phosphorus removal coupling with anammox (PDPRA) enables synergistic removal of C, N, and P nutrients from municipal wastewater: A year-round pilot-scale evaluation

Applying anaerobic ammonium oxidation (anammox) in municipal wastewater treatment plants (MWWTPs) can unlock significant energy and resource savings. However, its practical implementation encounters significant challenges, particularly due to its limited compatibility with carbon and phosphorus removal processes. This study established a pilot-scale plant featuring a modified anaerobic-anoxic-oxic (A2O) process and operated continuously for 385 days, treating municipal wastewater of 50 m3/d. For the first time, we propose a novel concept of partial denitrifying phosphorus removal coupling with anammox (PDPRA), leveraging denitrifying phosphorus-accumulating organisms (DPAOs) as NO2- suppliers for anammox. 15N stable isotope tracing revealed that the PDPRA enabled an anammox reaction rate of 6.14 ± 0.18 μmol-N/(L·h), contributing 57.4 % to total inorganic nitrogen (TIN) removal. Metagenomic sequencing and 16S rRNA amplicon sequencing unveiled the co-existence and co-prosperity of anammox bacteria and DPAOs, with Candidatus Brocadia being highly enriched in the anoxic biofilms at a relative abundance of 2.46 ± 0.52 %. Finally, the PDPRA facilitated the synergistic conversion and removal of carbon, nitrogen, and phosphorus nutrients, achieving remarkable removal efficiencies of chemical oxygen demand (COD, 83.5 ± 5.3 %), NH4+ (99.8 ± 0.7 %), TIN (77.1 ± 3.6 %), and PO43- (99.3 ± 1.6 %), even under challenging operational conditions such as low temperature of 11.7 °C. The PDPRA offers a promising solution for reconciling the mainstream anammox and the carbon and phosphorus removal, shedding fresh light on the paradigm shift of MWWTPs in the near future.

Key function of Kouleothrix in stable formation of filamentous aerobic granular sludge at low superficial gas velocity with polymeric substrates

Forming and maintaining stable aerobic granular sludge (AGS) at a low superficial gas velocity (SGV) is challenging, particularly with polymeric substrates. This study cultivated filamentous aerobic granular sludge (FAGS) with filamentous Kouleothrix (Type 1851) at low SGV (0.15 cm/s) utilizing mixed acetate-soluble starch. Within approximately 260 days, notable increases in the relative abundance of Kouleothrix (from 4 % to 10 %) and Ca. Competibacter (from 1 % to 26 %) were observed through 16S rRNA gene analysis. Metagenomic analysis revealed increased expression of functional genes involved in volatile fatty acid (VFA) production (e.g., ackA and pta) and polyhydroxyalkanoate synthesis (e.g., phbB and phbC). Kouleothrix acted as a skeleton for bacterial attachment and was the key fermenting bacteria promoting granulation and maintaining granule stability. This study provides insight into the formation of FAGS with low-energy and non-VFA substrates.

Intensifying the simultaneous removal of nitrogen and phosphorus of an integrated aerobic granular sludge-membrane bioreactor by Acinetobacter junii

This work aims at intensifying the simultaneous removal of nitrogen and phosphorus of an integrated aerobic granular sludge (AGS) - membrane bioreactor (MBR) by Acinetobacter junii. After acclimation and enrichment in a sequencing batch reactor (SBR), Acinetobacter junii, a kind of denitrifying phosphate accumulating organism (DPAO), was successfully screened in the used SBR. Then it was verified to be capable of effectively enhancing the performance in the simultaneous removal of nitrogen and phosphorus of AGS-MBR. In the system, DPAO (Acinetobacter junii) mainly occurred in AGS, and the highest ratio even reached 22.8%, but its competitive advantages highly depend on the size of AGS. The presented results can cultivate AGS and enrich DPAO simultaneously to improve the removal of nitrogen and phosphorus of an AGS-MBR, which provide an environmentally friendly approach to upgrade traditional wastewater treatment processes.

Two-stage sequencing batch reactors with added iron shavings for nutrient removal and aerobic sludge granulation treating real wastewater with low carbon to nitrogen ratios

In response to the challenges of limited nutrient removal and the difficulty in forming aerobic granular sludge (AGS) with low carbon to nitrogen (C/N) ratios, a novel two-stage sequencing batch reactors (SBRs) (R1 and R2) system with added iron shavings was proposed and established. The results showed that AGS was developed and nitrogen (82.8 %) and phosphorus (94.7 %) were effectively removed under a C/N ratio at 1.7 ± 0.5. The average size of R1 and R2 increased from 45.3 μm to 138.7 μm and 132.8 μm. Under high biological selective pressure, phosphorus accumulating organisms like Comamonadaceae (14.8 %) and Chitinophagales (5.7 %) experienced enrichment in R1. Furthermore, R2 exhibited an increased abundance of nitrifying bacteria (2.3 %) and a higher proportion of nitrogen removal through autotrophic denitrification (＞17.5 %). Overall, this study introduces an innovative two-stage SBRs with added iron shavings, offering a novel approach for the treatment of low C/N ratios wastewater.

Towards low carbon demand and highly efficient nutrient removal: Establishing denitrifying phosphorus removal in anaerobic/anoxic/oxic + nitrification system

A two-sludge anaerobic/anoxic/oxic + nitrification system with simultaneous nitrogen and phosphorus removal was studied for enhanced low-strength wastewater treatment. After 158 days of operation, excellent NH4+-N, chemical oxygen demand (COD) and PO43--P removal (99.0 %, 90.0 % and 92.0 %, respectively) were attained under a low carbon/nitrogen ratio of 5, resulting in effluent NH4+-N, COD and PO43--P concentrations of 0.3, 30.0 and 0.5 mg/L, respectively. The results demonstrate that the anaerobic/anoxic/oxic sequencing batch reactor (A2-SBR) and nitrification sequencing batch reactor (N-SBR) had favorable denitrifying phosphorus removal and nitrification performance, respectively. High-throughput sequencing results indicate that the phosphate-accumulating organisms Dechloromonas (1.1 %) and Tetrasphaera (1.2 %) were enriched in the A2-SBR, while the ammonia-oxidizing bacteria Nitrosomonas (7.8 %) and the nitrite-oxidizing bacteria Nitrospira (18.1 %) showed excellent accumulation in the N-SBR. Further analysis via functional prediction revealed that denitrification is the primary pathway of nitrogen metabolism throughout the system. Overall, the system achieved low carbon and high efficiency nutrient removal.

A novel process based on powder carriers demonstrates robustness in nitrogen and phosphorus removal from real municipal wastewater

The development of efficient and low-consumption wastewater upgrading process is currently at the forefront of the wastewater treatment field. In this study, a novel wastewater treatment process based on powder carriers was proposed. Three systems, namely the activated sludge (AS) system, powder carrier (PC) system, and moving bed biofilm reactor (MBBR) system, were established and operated for over 140 days to treat real municipal wastewater. The characteristics and differences between the three systems were comprehensively investigated. The results suggested that the PC system exhibited notable advantages in nitrogen and phosphorus removal, especially under high influent load and low aeration conditions. The PC system, characterized by a higher nitrification rate compared to the MBBR system and a higher denitrification rate compared to the AS system, contributed to the stable nitrogen removal performance. The particle size of the zoogloea increased under the linkage of the powder carriers, and the mean size of micro-granules reached 170.88 μm. Large number of hydrophobic functional groups on sludge surface, coupled with increased protein content in EPS, further promoted sludge aggregation. Micro-granules formation improved settling performance and enhanced the abundance and activity of functional microbes. A significant enrichment in denitrifying bacteria and denitrifying phosphorus accumulating bacteria was observed in PC system. Up-regulation of the napA, narG, and nosZ genes was responsible for efficient nitrogen removal of the PC system. Moreover, a higher abundance in polyphosphate phosphotransferase (2.11 %) was found in PC system compared with AS and MBBR systems. The increase in the enzymes associated with poly-β-hydroxybutyrate (PHB) synthesis metabolism in PC system provided the energy for denitrification and phosphorus removal processes.

Plasmon-Stimulated Colorimetry Biosensor Array for the Identification of Multiple Metabolites

Rationally designing highly catalytic and stable nanozymes for metabolite monitoring is of great importance because of their huge potential in early disease diagnosis. Herein, a novel nanozyme based on hierarchically structured CuS/ZnS with a highly efficient peroxidase (POD)-mimic capability was developed and synthesized for multiple metabolite determination and recognition via the plasmon-stimulated biosensor array strategy. The designed nanozyme can simultaneously harvest plasmon triggered hot electron-hole pairs and generate photothermal properties, leading to a sharply boosted POD-mimic capability under 808 nm laser irradiation. Interestingly, because of the interaction diversity of the metabolite with POD-like nanomaterials, the unique inhibitory effect of metabolites on the POD-mimic activity could be the signal response as the differentiation. Thus, utilizing TMB as a typical chromogenic substrate in the addition of H2O2, the designed colorimetric biosensor array can produce diverse fingerprints for the three vital metabolisms (cysteine (Cys), ascorbic acid (AA), and glutathione (GSH)), which can be precisely identified by principal component analysis (PCA). Notably, a distinct fingerprint of a single metabolite with different levels and metabolite mixtures is also achieved with a detection limit of 1 μM. Most importantly, cell lysis could be effectively discriminated by the biosensor assay, implying its great potential in clinical diagnosis.

Two new clades recovered at high temperatures provide novel phylogenetic and genomic insights into Candidatus Accumulibacter

Candidatus Accumulibacter, a key genus of polyphosphate-accumulating organisms, plays key roles in lab- and full-scale enhanced biological phosphorus removal (EBPR) systems. A total of 10 high-quality Ca. Accumulibacter genomes were recovered from EBPR systems operated at high temperatures, providing significantly updated phylogenetic and genomic insights into the Ca. Accumulibacter lineage. Among these genomes, clade IIF members SCELSE-3, SCELSE-4, and SCELSE-6 represent the to-date known genomes encoding a complete denitrification pathway, suggesting that Ca. Accumulibacter alone could achieve complete denitrification. Clade IIC members SSA1, SCUT-1, SCELCE-2, and SCELSE-8 lack the entire set of denitrifying genes, representing to-date known non-denitrifying Ca. Accumulibacter. A pan-genomic analysis with other Ca. Accumulibacter members suggested that all Ca. Accumulibacter likely has the potential to use dicarboxylic amino acids. Ca. Accumulibacter aalborgensis AALB and Ca. Accumulibacter affinis BAT3C720 seemed to be the only two members capable of using glucose for EBPR. A heat shock protein Hsp20 encoding gene was found exclusively in genomes recovered at high temperatures, which was absent in clades IA, IC, IG, IIA, IIB, IID, IIG, and II-I members. High transcription of this gene in clade IIC members SCUT-2 and SCUT-3 suggested its role in surviving high temperatures for Ca. Accumulibacter. Ambiguous clade identity was observed for newly recovered genomes (SCELSE-9 and SCELSE-10). Five machine learning models were developed using orthogroups as input features. Prediction results suggested that they belong to a new clade (IIK). The phylogeny of Ca. Accumulibacter was re-evaluated based on the laterally derived polyphosphokinase 2 gene, showing improved resolution in differentiating different clades.

Full-scale upgrade activated sludge to continuous-flow aerobic granular sludge: Implementing microaerobic-aerobic configuration with internal separators

Aerobic granular sludge (AGS) has been successfully used in sequencing batch reactors. However, their application to existing continuous-flow systems remains challenging. In this study, a novel microaerobic-aerobic configuration with internal separators was implemented in a full-scale municipal wastewater treatment facility with a nominal capacity of 2.5 × 104 m3 d-1. Sludge characteristics, pollutant removal and associated pathways, shifts in the microbial community, and underlying granulation mechanisms were investigated. Following a two-month operation period, the transition from flocculent-activated sludge to well-defined AGS with distinct boundaries and compact structures was successfully achieved. The average size of sludge increased from 31.9 to 138.5 μm, with granules larger than 200 μm constituting 28.9 % of the total sludge and SVI30 averaging 51.4 ± 8.2 mL g-1. The 95th percentile effluent COD, NH4+-N, and TN concentrations were 35.0, 1.2, and 13.3 mg L-1, respectively. The primary pathways for pollutant removal were identified as simultaneous nitrification, denitrification, and phosphorus removal within the microaerobic tanks. The enrichment of denitrifying phosphorus-accumulating organisms, including Hydrogenophaga, Accumulibacter, Azospira, Dechloromonas, and Pseudomonas, provides an essential microbial foundation. Furthermore, computational fluid dynamics modeling revealed that the incorporation of internal separators in aerobic tanks induced shifts in the flow pattern, transitioning from a single-circulation cell to multiple vortical cells. This alteration amplified the local velocity gradients, generating the required shear forces to drive granulation. Moreover, mass balance analysis revealed that the microaerobic and aerobic tanks operated under feast and famine conditions, respectively, creating a microbial selection pressure that favored granulation. This process eliminates the need for external clarifiers, resulting in a footprint reduction of 38.2 % and one-third energy savings for sludge reflux. This study offers valuable insights into the application of continuous-flow AGS to upgrade existing activated sludge systems with limited retrofitting requirements.

Assessing the performance of polyphosphate accumulating organisms in a full-scale side-stream enhanced biological phosphorous removal

Phosphorous (P) removal in wastewater treatment is essential to prevent eutrophication in water bodies. Side-stream enhanced biological phosphorous removal (S2EBPR) is utilized to improve biological P removal by recirculating internal streams within a side-stream reactor to generate biodegradable carbon (C) for polyphosphate accumulating organisms (PAOs). In this study, a full-scale S2EBPR system in a water resource recovery facility (WRRF) was evaluated for 5 months. Batch experiments revealed a strong positive correlation (r = 0.91) between temperature and C consumption rate (3.56-8.18 mg-COD/g-VSS/h) in the system, with temperature ranging from 14°C to 18°C. The anaerobic P-release to COD-uptake ratio decreased from 0.93 to 0.25 mg-P/mg-COD as the temperature increased, suggesting competition between PAOs and other C-consumers, such as heterotrophic microorganisms, to uptake bioavailable C. Microbial community analysis did not show a strong relationship between abundance and activity of PAO in the tested WRRF. An assessment of the economic feasibility was performed to compare the costs and benefits of a full scale WRRF with and without implementation of the S2EBPR technology. The results showed the higher capital costs required for S2EBPR were estimated to be compensated after 5 and 11 years of operation, respectively, compared to chemical precipitation and conventional EBPR. The results from this study can assist in the decision-making process for upgrading a conventional EBPR or chemical P removal process to S2EBPR. PRACTITIONER POINTS: Implementation of S2EBPR presents adaptable configurations, exhibiting advantages over conventional setups in addressing prevalent challenges associated with phosphorous removal. A full-scale S2EBPR WRRF was monitored over 5 months, and activity tests were used to measure the kinetic parameters. The seasonal changes impact the kinetic parameters of PAOs in the S2EBPR process, with elevated temperatures raising the carbon demand. PAOs abundance showed no strong correlation with their activity in the full-scale S2EBPR process in the tested WRRF. Feasibility assessment shows that the benefits from S2EBPR operation can offset upgrading costs from conventional BPR or chemical precipitation.

Responses of antibiotic resistance genes in the enhanced biological phosphorus removal system under various antibiotics: Mechanisms and implications

The effects of antibiotics on the proliferation of antibiotic resistant genes (ARGs) in WWTPs have drawn great attention in recent years. The effects of antibiotics on ARGs in the enhanced biological phosphorus removal (EBPR) system and its mechanisms, however, are still not well understood. In this study, EBPR systems were constructed using activated sludge to investigate the effects of ten commonly detected antibiotics in the environment on the proliferation of ARGs and the mechanisms involved. The results showed that the total abundance of ARGs increased to varying degrees with the addition of different antibiotics (0.05 mmol/L), and the top 30 ARGs increased by 271.1 % to 370.0 %. Mobile genetic elements (MGEs), functional modules, and the bacteria community were consistently related to the changes in ARGs. Refractory antibiotics, in particular, have a stronger promoting effect on transduction in the EBPR system. The insertion sequence common region (ISCR) and transposon (Tnp) were identified as crucial factors in the proliferation of ARGs. Moreover, the risk of polyphosphate accumulating organisms (PAOs) carrying ARGs in the presence of antibiotics should not be ignored. Our findings emphasize the potential efficacy of employing strategies that target the reduction of MGEs, regulation of cellular communication, and management of microbial communities to effectively mitigate the risks associated with ARGs.

Highly efficient phosphorous removal in constructed wetland with iron scrap: Insights into the microbial removal mechanism

Excessive phosphorus (P) in surface water can lead to serious eutrophication and economic losses. Iron-based constructed wetland (CW) is considered as a promising solution to eliminate P effectively due to the advantage of low-cost. However, there is limited available information on the microbial removal mechanism of P in iron-based CW up to now. Therefore, CW with iron scrap was constructed to investigate the treatment performance and microbial removal mechanism in this study. Results showed that efficient and stable P removal (97.09 ± 1.90%) was achieved in iron scrap-based CW during the experiment period, which was attributed to the precipitation of iron and P and improved microbially mediated P removal. Metagenomic analysis showed that microbial diversity was enhanced and phosphate accumulating organisms (e.g., Dechloromonas and Tetrasphaera) were enriched in CW with iron scrap, which explained higher P removal reasonably. In addition, the abundance of genes involved in the P starvation (e.g., phoB), uptake and transport (e.g., pstB) were enhanced in iron scrap-based CW. Enrichment analysis demonstrated that phosphotransferase pathway was also significantly up-regulated in CW with iron scraps, indicating that the energy supply of microbial P removal was enhanced. These findings provide a better understanding of the microbial removal mechanism of P in iron-based CW.

Enhanced biological wastewater treatment supplemented with anaerobic fermentation liquid of primary sludge

The wastewater treatment performance in an inverted A2/O reactor supplemented with fermentation liquid of primary sludge was explored comparing to commercial carbon sources sodium acetate and glucose. Similar COD removal rate was observed with the effluent COD stably reaching the discharge standard for those 3 carbon sources. However, the fermentation liquid distributed more carbon source in the anaerobic zone. Fermentation liquid and sodium acetate tests achieved better nitrogen removal rate than glucose test. The fermentation liquid test showed the best biological phosphorus removal performance with the effluent phosphorus barely reaching the discharge standard. The microbial community characterization revealed that the fermentation liquid test was dominated by phylum Proteobacter in all the anoxic, anaerobic and aerobic zones. Denitrifying phosphorus accumulating organisms (PAOs) (i.e., genera Dechloromonas and unclassified_f__Rhodocyclaceae) were selectively enriched with high abundances (over 20%), which resulted in improved phosphorus removal efficiency. Moreover, the predicted abundances of enzymes involved in nitrogen and phosphorus removal were also enhanced by the fermentation liquid.

Prediction of biological nutrients removal in full-scale wastewater treatment plants using H2O automated machine learning and back propagation artificial neural network model: Optimization and comparison

The effective control of total nitrogen (ETN) and total phosphorus (ETP) in effluent is challenging for wastewater treatment plants (WWTPs). In this work, automated machine learning (AutoML) (mean square error = 0.4200 ∼ 3.8245, R2 = 0.5699 ∼ 0.6219) and back propagation artificial neural network (BPANN) model (mean square error = 0.0012 ∼ 6.9067, R2 = 0.4326 ∼ 0.8908) were used to predict and analyze biological nutrients removal in full-scale WWTPs. Interestingly, BPANN model presented high prediction performance and general applicability for WWTPs with different biological treatment units. However, the AutoML candidate models were more interpretable, and the results showed that electricity carbon emission dominated the prediction. Meanwhile, increasing data volume and types of WWTP hardly affected the interpretable results, demonstrating its wide applicability. This study demonstrated the validity and the specific advantages of predicting ETN and ETP using H2O AutoML and BPANN model, which provided guidance on the prediction and improvement of biological nutrients removal in WWTPs.

Metagenomics, metatranscriptomics, and proteomics reveal the metabolic mechanism of biofilm sequencing batch reactor with higher phosphate enrichment capacity under low phosphorus load

The biofilm sequencing batch reactor (BSBR) process has higher phosphate recovery efficiency and enrichment multiple when the phosphorus load is lower, but the mechanism of phosphate enrichment at low phosphorus load remains unclear. In this study, we operated two BSBR operating under low and high phosphorus load (0.012 and 0.032 kg/(m3·d)) respectively, and used metagenomic, metatranscriptomic, and proteomics methods to analyze the community structure of the phosphorus accumulating organisms (PAOs) in the biofilm, the transcription and protein expression of key functional genes and enzymes, and the metabolism of intracellular polymers. Compared with at high phosphorus load, the BSBR at low phosphorus load have different PAOs and fewer types of PAOs, but in both cases the PAOs must have the PHA, PPX, Pst, and acs genes to become dominant. Some key differences in the metabolism of PAOs from the BSBR with different phosphorus load can be identified as follows. When the phosphorus load is low, the adenosine triphosphoric acid (ATP) and NAD(P)H in the anaerobic stage come from the TCA cycle and the second half of the EMP pathway. The key genes that are upregulated include GAPDH, PGK, ENO, ppdk in the EMP pathway, actP in acetate metabolism, phnB in polyhydroxybutyrate (PHB) synthesis, and aceA, mdh, sdhA, and IDH1 in the TCA cycle. In the meantime, the ccr gene in the PHV pathway is inhibited. As a result, the metabolism of the PAOs features low glycogen with high PHB, Pupt, Prel, and low PHV. That is, more ATP and NAD(P)H flow to phosphorus enrichment metabolism, thus allowing the highly efficient enrichment of phosphorus from low concentration phosphate thanks to the higher abundance of PAOs. The current results provide theoretical support and a new technical option for the enrichment and recovery of low concentrations of phosphate from wastewater by the BSBR process.

Step-feeding food waste fermentation liquid as supplementary carbon source for low C/N municipal wastewater treatment: Bench scale performance and response of microbial community

Municipal wastewater treatment often lacks carbon source, while carbon-rich organics in food waste are deficiently utilized. In this study, the food waste fermentation liquid (FWFL) was step-fed into a bench-scale step-feed three-stage anoxic/aerobic system (SFTS-A/O), to investigate its performance in nutrients removal and the response of microbial community as a supplementary carbon source. The results showed that the total nitrogen (TN) removal rate increased by 21.8-109.3% after step-feeding FWFL. However, the biomass of the SFTS-A/O system was increased by 14.6% and 11.9% in the two phases of the experiment, respectively. Proteobacteria was found to be the dominant functional phyla induced by FWFL, and the increase of its abundance attributed to the enrichment of denitrifying bacteria and carbohydrate-metabolizing bacteria was responsible for the biomass increase. Azospira belonged to Proteobacteria phylum was the dominant denitrifying genera when step-fed with FWFL, its abundance was increased from 2.7% in series 1 (S1) to 18.6% in series 2 (S2) and became the keystone species in the microbial networks. Metagenomics analysis revealed that step-feeding FWFL enhanced the abundance of denitrification and carbohydrates-metabolism genes, which were encode mainly by Proteobacteria. This study constitutes a key step towards the application of FWFL as a supplementary carbon source for low C/N municipal wastewater treatment.

A microbial flora with superior pollutant removal efficiency and its fermentation process optimization

Microbial flora plays an important role in microorganism-enhanced technology. The pollutant degradation ability and viable counts of these agents are crucial to guarantee their practical application. In this study, an efficient pollutant-degrading microbial flora was screened, its medium components and culture conditions were optimized, and its effect was verified in zeolite trickling filter towers. After a 24 h culture under the optimal conditions, the viable count reached 4.76 × 109 cfu/mL, with the degradation rates of ammonia nitrogen (NH4+-N), nitrate nitrogen (NO3--N), total nitrogen (TN), total phosphorus (TP), and chemical oxygen demand (COD) increased to 93.5%, 100%, 68.3%, 32.6%, and 85%, respectively. After optimizing the feeding strategy, the concentration of viable bacteria reached 5.80 × 109 cfu/mL. In the application effect verification experiment, the degradation rates of NH4+-N, TN, TP, and COD in the experimental group reached 96.69%, 75.18%, 73.82%, and 90.83%, respectively, showing a significant improvement compared to the results of the control group. The main components in the control group were Dokdonella, Brevundimonas, Alishewanella, Rhodobacter, Pseudoxanthomonas, and Thauera, whereas those in the experimental group were Dokdonella, Proteocatella, Rhodobacter, Dechlomonas, and Nitrospira. Proteocatella, Dechlomonas, and Nitrosra, which were unique to the experimental group, are common bacteria used for nitrogen and phosphorus removal. This explains the difference in the sewage treatment capacity between the two groups. This study provides an alternative sewage treatment microbial flora with a reasonable production cost and high degradation efficiency for NH4+-N, TN, TP, and COD.

Effect of return activated sludge diversion ratio on phosphorus removal performance in side-stream enhanced biological phosphorus removal (S2EBPR) process

In this study, a lab-scale continuous flow side-stream enhanced biological phosphorus (P) removal (S2EBPR) reactor was operated for 247 days treating synthetic wastewater with influent carbon to phosphorus (C/P) ratio of 25.0 g COD/g P and influent PO43--P of 7.4 ± 0.3 mg P/L. The effect of the return activated sludge (RAS) diversion ratio on S2EBPR reactor was investigated by comparing P removal performance, microbial activity, and community structure. The results showed that the RAS diversion ratio of 8.0%, by yielding a side-stream sludge retention time (SRTSS) of ∼60 h, resulted in the lowest effluent PO43--P concentration of 0.5 ± 0.3 mg P/L. The results of in situ process profiles and ex situ P release and uptake batch tests under different RAS diversion conditions showed that the more anaerobic P release was obtained in the side-stream reactor, the higher the P removal efficiency and EBPR activity were achieved. The stoichiometric ratios observed in EBPR activity tests indicated a polyphosphate accumulating organisms (PAOs) metabolism mainly dependent on the glycolysis pathway. The results of microbial ecology analysis revealed that the optimized SRTSS would give a competitive advantage to PAOs in the S2EBPR process. By obtaining statistically reliable results, this study would provide guidance for wastewater treatment plants to achieve optimal P removal performance in S2EBPR configuration.

Unraveling the rate-limiting step in microorganisms' mediation of denitrification and phosphorus absorption/transport processes in a highly regulated river-lake system

River-lake ecosystems are indispensable hubs for water transfers and flow regulation engineering, which have frequent and complex artificial hydrological regulation processes, and the water quality is often unstable. Microorganisms usually affect these systems by driving the nutrient cycling process. Thus, understanding the key biochemical rate-limiting steps under highly regulated conditions was critical for the water quality stability of river-lake ecosystems. This study investigated how the key microorganisms and genes involving nitrogen and phosphorus cycling contributed to the stability of water by combining 16S rRNA and metagenomic sequencing using the Dongping river-lake system as the case study. The results showed that nitrogen and phosphorus concentrations were significantly lower in lake zones than in river inflow and outflow zones (p < 0.05). Pseudomonas, Acinetobacter, and Microbacterium were the key microorganisms associated with nitrate and phosphate removal. These microorganisms contributed to key genes that promote denitrification (nirB/narG/narH/nasA) and phosphorus absorption and transport (pstA/pstB/pstC/pstS). Partial least squares path modeling (PLS-PM) revealed that environmental factors (especially flow velocity and COD concentration) have a significant negative effect on the key microbial abundance (p < 0.001). Our study provides theoretical support for the effective management and protection of water transfer and the regulation function of the river-lake system.

Expanding the Diversity of Accumulibacter with a Novel Type and Deciphering the Transcriptional and Morphological Features among Co-Occurring Strains

"Candidatus Accumulibacter" is the major polyphosphate-accumulating organism (PAO) in global wastewater treatment systems, and its phylogenetic and functional diversity have expanded in recent years. In addition to the widely recognized type I and II sublineages, we discovered a novel type enriched in laboratory bioreactors. Core gene and machine learning-based gene feature profiling supported the assertion that type III "Ca. Accumulibacter" is a potential PAO with the unique function of using dimethyl sulfoxide as an electron acceptor. Based on the correlation between ppk1 and genome similarity, the species-level richness of Accumulibacter was estimated to be over 100, suggesting that the currently recognized species are only the tip of the iceberg. Meanwhile, the interstrain transcriptional and morphological features of multiple "Ca. Accumulibacter" strains co-occurring in a bioreactor were investigated. Metatranscriptomics of seven co-occurring strains indicated that the expression level and interphasic dynamics of PAO phenotype-related genes had minimal correlation with their phylogeny. In particular, the expression of denitrifying and polyphosphate (poly-P) metabolism genes exhibited higher interstrain and interphasic divergence than expression of glycogen and polyhydroxyalkanoate metabolic genes. A strategy of cloning rRNA genes from different strains based on similar genomic synteny was successfully applied to differentiate their morphology via fluorescence in situ hybridization. Our study further expands the phylogenetic and functional diversity of "Ca. Accumulibacter" and proposes that deciphering the function and capability of certain "Ca. Accumulibacter" should be tailored to the environment and population in question. IMPORTANCE In the last 2 decades, "Ca. Accumulibacter" has garnered significant attention as the core functional but uncultured taxon for enhanced biological phosphorus removal due to its phylogenetic and functional diversity and intragenus niche differentiation. Since 2002, it has been widely known that this genus has two sublineages (type I and II). However, in this study, a metagenomic approach led to the discovery of a novel type (type III) with proposed novel functional features. By comparing the average nucleotide identity of "Ca. Accumulibacter" genomes and the similarity of ppk1, a phylogenetic biomarker largely deposited in databases, the global species-level richness of "Ca. Accumulibacter" was estimated for the first time to be over 100. Furthermore, we observed the co-occurrence of multiple "Ca. Accumulibacter" strains in a single bioreactor and found the simultaneous transcriptional divergence of these strains intriguing with regard to their niche differentiation within a single community. Our results indicated a decoupling feature between transcriptional pattern and phylogeny for co-occurring strains.

Bio-clogging mitigation in constructed wetland using microbial fuel cells with novel hybrid air-photocathode

Excessive accumulation of extracellular polymeric substances (EPS) in constructed wetland (CW) substrate can lead to bio-clogging and affect the long-term stable operation of CW. In this study, a microbial fuel cell (MFC) was coupled with air-photocathode to mitigate CW bio-clogging by enhancing the micro-electric field environment. Because TiO₂/biochar could catalyze and accelerate oxygen reduction reaction, further promoting the gain of electric energy, the electricity generation of the tandem CW-photocatalytic fuel cell (CW-PFC) reached 90.78 mW m^-3. After bio-clogging was mitigated in situ in tandem CW-PFC, the porosity of CW could be restored to about 62.5 % of the initial porosity, and the zeta potential of EPS showed an obvious increase (-14.98 mV). The removal efficiencies of NH₄⁺-N and chemical oxygen demand (COD) in tandem CW-PFC were respectively 31.8 ± 7.2 % and 86.1 ± 6.8 %, higher than those in control system (21.1 ± 11.0 % and 73.3 ± 5.6 %). Tandem CW-PFC could accelerate the degradation of EPS into small molecules (such as aromatic protein) by enhancing the electron transfer. Furthermore, microbiome structure analysis indicated that the enrichment of characteristic microorganisms (Anaerovorax) for degradation of protein-related pollutants, and electroactive bacteria (Geobacter and Trichococcus) promoted EPS degradation and electron transfer. The degradation of EPS might be attributed to the up-regulation of the abundances of carbohydrate and amino acid metabolism. This study provided a promising new strategy for synergic mitigation and prevention of bio-clogging in CW by coupling with MFC and photocatalysis.

Enhanced nitrogen removal in immersed rotating self-aerated biofilm reactor: nitrogen removal pathway and microbial mechanism

To achieve energy-efficient treatment of the rural wastewater with satisfying performance, a novel immersed rotating self-aerated biofilm reactor (iRSABR) was proposed in this study. The iRSABR system showed better biofilm renewal performance and higher microbial activity. The effect of different regulation strategies on the iRSABR system was investigated in this study. The 70% immersion ratio and 4 r/min rotation speed (stage III) exhibited the best performance, with a total nitrogen removal efficiency of 86% and a simultaneous nitrification-denitrification (SND) rate of 76%, along with the highest electron transport system activity. The nitrogen removal pathway revealed that the SND was achieved through autotrophic/heterotrophic nitrification and aerobic/anoxic denitrification. The regulation strategy in the iRSABR system established a synergistic microbial community with main functional bacteria of nitrification (Nitrosomonas), anoxic denitrification (Flavobacterium, Pseudoxanthomonas), and aerobic denitrification (Thauera). This study highlighted the feasibility and adaptability of the iRSABR system toward energy-efficient rural wastewater treatment.

Efficient nitrogen removal in a total floc sludge system from domestic wastewater with low C/N: High anammox nitrogen removal contribution driven by endogenous partial denitrification

Since unsustainable partial nitrification prone to unstable nitrogen removal rates, cultivation and enrichment of AnAOB, further improve autotrophic nitrogen removal contribution have been challenges in the mainstream anammox process. This study proposed a new strategy to enrich AnAOB motivated by endogenous partial denitrification (EPD) in total floc sludge system through the AOA process with sustainable nitrification. The results showed that in the presence of NH₄⁺ and NO₃^- at the anoxic stage of N-EPDA, Ca. Brocadia was enriched (0.005%→0.92%) in floc sludge via internal carbon source metabolism of EPD. The C/N and temperature of N-EPDA were also optimized to achieve higher activities of EPD and anammox. The N-EPDA was operated at low C/N ratio (3.1) with anammox nitrogen removal contribution of 78% during the anoxic stage, Eff.TIN of 8.3 mg/L and NRE of 83.5% during phase III, achieved efficient autotrophic nitrogen removal and AnAOB enrichment in the absence of partial nitrification.

Advanced nitrogen removal from low carbon nitrogen ratio domestic sewage via continuous plug-flow anaerobic/oxic/anoxic system: Enhanced by endogenous denitrification

An anaerobic/oxic/anoxic continuous plug-flow biorereactor was established to derive stable advanced nitrogen removal of oligotrophic domestic wastewater by setting a sludge dual-reflux system and a mixed liquid cross-flow system, while extending the hydraulic retention time in anoxic section. The effluent total inorganic nitrogen was 7.9 ± 2.2 mg N/L, with removal efficiency of 84 ± 3.9%. Results of nitrogen balance calculations indicated that the contribution of simultaneous nitrification and denitrification to total inorganic nitrogen loss in oxic region was 15% during stable stage, and the total inorganic nitrogen removal by endogenous-denitrification and enhanced exogenous-denitrification in the anoxic region was 39.9%. Prolongation of hydraulic retention time in anoxic segment is the critical reason for enhancing endogenous-denitrification, and cross-flow system is an important measure to improve exogenous-denitrification. This study provides new insights into bridging the gap between energy-saving and high-level nitrogen removal from municipal wastewater with low carbon to nitrogen ratios.

Novel Y2O3 based calcium-alginate beads for highly selective adsorption of phosphate from aqueous solution

Recently, selective phosphorus removal from aqueous solution has been a highly desirable strategy to combat eutrophication due to the increasingly stringent phosphorous emission standards. However, conventional adsorbents pose the limitations in phosphate removal suffering from lack of selectivity and stability under complicated condition and poor separation. In this study, novel Y₂O₃ based calcium-alginate (Y₂O₃/SA) beads of feasible stability and highly selectivity towards phosphate by encapsulating Y₂O₃ nanoparticles inside calcium-alginate beads via Ca²⁺ controlled gelation process was synthesized and characterized. The phosphate adsorption performance and mechanism were investigated. In general, a high selectivity among co-existing anions was found with co-existing anion concentration up to 62.5 times of the phosphate concentration. Additionally, phosphate adsorption by Y₂O₃/SA beads exhibited stable performance over a wide pH range between 2 and 10, while reaching the maximum adsorption capacity at pH 3 (48.54 mg-P/g). The value of point of zero charge (pH_pzc) of Y₂O₃/SA beads was approximately 3.45. Pseudo-second-order and Freundlich isotherm models can well accord with kinetics and isotherms data. The FTIR and XPS characterizations analyzed that inner-sphere complexes were proposed to be the major contributor of Y₂O₃/SA beads for phosphate removal. In conclusion, Y₂O₃/SA beads as the mesoporous material exhibited excellent stability and selectivity towards phosphate removal.

The impact of pH on the anaerobic and aerobic metabolism of Tetrasphaera-enriched polyphosphate accumulating organisms

Members of the genus Tetrasphaera are putative polyphosphate accumulating organisms (PAOs) that have been found in greater abundance than Accumulibacter in many full-scale enhanced biological phosphorus removal (EBPR) wastewater treatment plants worldwide. Nevertheless, previous studies on the effect of environmental conditions, such as pH, on the performance of EBPR have focused mainly on the response of Accumulibacter to pH changes. This study examines the impact of pH on a Tetrasphaera PAO enriched culture, over a pH range from 6.0 to 8.0 under both anaerobic and aerobic conditions, to assess its impact on the stoichiometry and kinetics of Tetrasphaera metabolism. It was discovered that the rates of phosphorus (P) uptake and P release increased with an increase of pH within the tested range, while PHA production, glycogen consumption and substrate uptake rate were less sensitive to pH changes. The results suggest that Tetrasphaera PAOs display kinetic advantages at high pH levels, which is consistent with what has been observed previously for Accumulibacter PAOs. The results of this study show that pH has a substantial impact on the P release and uptake kinetics of PAOs, where the P release rate was >3 times higher and the P uptake rate was >2 times higher at pH 8.0 vs pH 6.0, respectively. Process operational strategies promoting both Tetrasphaera and Accumulibacter activity at high pH do not conflict with each other, but lead to a potentially synergistic impact that can benefit EBPR performance.

Effect of thermal hydrolyzed sludge filtrate as an external carbon source on biological nutrient removal performance of A2/O system

Thermal hydrolyzed sludge filtrate (THSF) rich in biodegradable organics could be a promising external carbon source for biological nutrient removal (BNR). The use of THSF can effectively reduce wastewater treatment plants operating costs and recover bioresources and bioenergy from the waste activated sludge. In this study, the effect of THSF on the BNR process was investigated using a lab-scale anaerobic/anoxic/oxic (A²/O) system. Total nitrogen (TN) and total phosphorus (TP) removal efficiencies of 74.26 ± 3.36% and 92.20 ± 3.13% at a 0.3% dosing ratio were achieved, respectively. Moreover, 20.42% of the chemical oxygen demand (COD) contained in THSF contributed to denitrification, enhancing nitrogen removal efficiency from 55.30 to 74.26%. However, the effluent COD increased by approximately 36.80%, due to 18.39% of the COD contained in THSF discharged with effluent. In addition, the maximum denitrification rate was approximately 16.01 mg N g VSS^-1 h^-1, while the nitrification rate was not significantly affected by THSF. Nitrosomonas, a common chemoautotrophic nitrifier, was not detected after the introduction of THSF. The aerobic denitrifier Rubellimicrobium was stimulated, and its relative abundance increased from 0.16 to 3.03%. Moreover, the relative abundance of Dechloromonas was 3.93%, indicating that the denitrifying phosphorus removal process was enhanced. This study proposes an engineering application route of THSF, and the chemical phosphate removal pretreatment might be a means to suppress the phosphate recirculation.

Effect of Fe3+ on the nutrient removal performance and microbial community in a biofilm system

In this study, the influence of Fe3+ on N removal, microbial assembly, and species interactions in a biofilm system was determined. The results showed that maximum efficiencies of ammonia nitrogen (NH4+-N), total nitrogen (TN), phosphorus (P), and chemical oxygen demand (COD) removal were achieved using 10 mg/L Fe3+, reaching values of 100, 78.85, 100, and 95.8%, respectively, whereas at concentrations of 15 and 30 mg/L Fe3+ suppressed the removal of NH4+-N, TN, and COD. In terms of absolute abundance, the expression of bacterial amoA, narG, nirK, and napA was maximal in the presence of 10 mg/L Fe3+ (9.18 × 105, 8.58 × 108, 1.09 × 108, and 1.07 × 109 copies/g dry weight, respectively). Irrespective of Fe3+ concentrations, the P removal efficiency remained at almost 100%. Candidatus_Competibacter (10.26–23.32%) was identified as the most abundant bacterial genus within the system. Determinism (50%) and stochasticity (50%) contributed equally to microbial community assembly. Co-occurrence network analysis revealed that in the presence of Fe3+, 60.94% of OTUs in the biofilm system exhibited positive interactions, whereas 39.06% exhibited negative interactions. Within the OTU-based co-occurrence network, fourteen species were identified as key microbes. The stability of the system was found to be predominantly shaped by microbial cooperation, complemented by competition for resources or niche incompatibility. The results of this study suggested that during chemical P removal in wastewater treatment plants using biofilm methods, the concentration of supplemental Fe3+ should be maintained at 10 mg/L, which would not only contribute to P elimination, but also enhance N and COD removal.

Elucidating performance failure in the use of an Anaerobic-Oxic-Anoxic (AOA) plug-flow system for biological nutrient removal

The Anaerobic-oxic-anoxic (AOA) process is a carbon-saving and high-efficiency way to treat municipal wastewater and gets more attention. Recent reports suggest that in the AOA process, well-performed endogenous denitrification (ED), conducted by glycogen accumulating organisms (GAOs), is crucial to advanced nutrient removal. However, the consensuses about starting up and optimizing AOA, and in-situ enriching GAOs, are still lacking. Hence, this study tried to verify whether AOA could be established in an ongoing anaerobic-oxic (AO) system. For this aim, a lab-scale plug-flow reactor (working volume of 40 L) previously operated under AO mode for 150 days, during that 97.87 % of ammonium was oxidized to nitrate and 44.4 % of orthophosphate was absorbed. Contrary to expectations, under AOA mode, little nitrate reduction (only 6.3 mg/L within 5.33 h) indicated the failure of ED. According to high-throughput sequencing analysis, GAOs (Candidatus_Competibacter and Defluviicoccus) were enriched within the AO period (14.27 % and 3 %) and then still dominated during the AOA period (13.9 % and 10.07 %) but contributed little to ED. Although apparent alternate orthophosphate variations existed in this reactor, no typical phosphorus accumulating organisms were abundant (< 2 %). More than that, within the long-term AOA operation (109 days), the nitrification weakened (merely 40.11 % of ammonium been oxidized) since the dual effects of low dissolved oxygen and long unaerated duration. This work reveals the necessity of developing practical strategies for starting and optimizing AOA, and then three aspects in future studying are pointed out.

Bioaugmentation with Tetrasphaera to improve biological phosphorus removal from anaerobic digestate of swine wastewater

Tetrasphaera-enhanced biological phosphorus removal (T-EBPR) was developed by augmenting conventional EBPR (C-EBPR) with Tetrasphaera to improve phosphorus removal from anaerobic digestate of swine wastewater. At influent total phosphorus (TP) concentrations of 45-55 mg/L, T-EBPR achieved effluent TP concentration of 4.17 ± 1.02 mg/L, 54 % lower than that in C-EBPR (8.98 ± 0.76 mg/L). The enhanced phosphorous removal was presumably due to the synergistic effect of Candidatus Accumulibacter and Tetrasphaera occupying different ecological niches. Bioaugmentation with Tetrasphaera promoted the polyphosphate accumulation metabolism depending more on the glycolysis pathway, as evidenced by an increase in intracellular storage compounds of glycogen and polyhydroxyalkanoates by 0.87 and 0.34 mmol C/L, respectively. The enhanced intracellular storage capacity was coincidentally linked to the increase in phosphorus release and uptake rates by 1.23 and 1.01 times, respectively. These results suggest bioaugmentation with Tetrasphaera could be an efficient way for improved phosphorus removal from high-strength wastewater.

Research advances of ammonia oxidation microorganisms in wastewater: metabolic characteristics, microbial community, influencing factors and process applications

Ammonia oxidation carried out by ammonia-oxidizing microorganisms (AOMs) is a central step in the global nitrogen cycle. Aerobic AOMs comprise conventional ammonia-oxidizing bacteria (AOB), novel ammonia-oxidizing archaea (AOA), which could exist in complex and extreme conditions, and complete ammonia oxidizers (comammox), which directly oxidize ammonia to nitrate within a single cell. Anaerobic AOMs mainly comprise anaerobic ammonia-oxidizing bacteria (AnAOB), which can transform NH₄⁺-N and NO₂^--N into N₂ under anaerobic conditions. In this review, the unique metabolic characteristics, microbial community of AOMs and the influencing factors are discussed. Process applications of nitrification/denitrification, nitritation/denitrification, nitritation/anammox and partial denitrification/anammox in wastewater treatment systems are emphasized. The future development of nitrogen removal processes using AOMs is expected, enrichment of comammox facilitates the complete nitrification performance, inhibiting the activity of comammox and NOB could achieve stable nitritation, and additionally, AnAOB conducting the anammox process in municipal wastewater is a promising development direction.

Exploring the stability of an A-stage-EBPR system for simultaneous biological removal of organic matter and phosphorus

This work evaluates the performance and stability of a continuous anaerobic/aerobic A-stage system with integrated enhanced biological phosphorus removal (A-stage-EBPR) under different operational conditions. Dissolved oxygen (DO) in the aerobic reactor was tested in the 0.2-2 mgDO/L range using real wastewater amended with propionic acid, obtaining almost full simultaneous COD and P removal without nitrification in the range 0.5-1 mgDO/L, but failing at 0.2 mgDO/L. Anaerobic purge was tested to evaluate a possible mainstream P-recovery strategy, generating a P-enriched stream containing 22% of influent P. COD and N mass balances indicated that about 43% of the influent COD could be redirected to the anaerobic digestion for methane production and 66% of influent NH₄⁺-N was discharged in the effluent for the following N-removal B-stage. Finally, when the system was switched to glutamate as sole carbon source, successful EBPR activity and COD removal were maintained for two months, but after this period settleability problems appeared with biomass loss. Microbial community analysis indicated that Propionivibrio, Thiothrix and Lewinella were the most abundant species when propionic acid was the carbon source and Propionivibrio was the most favoured with glutamate. Thiothrix, Hydrogenophaga, Dechloromonas and Desulfobacter appeared as the dominant polyphosphate-accumulating organisms (PAOs) under different operation stages.