Flexible Field-Effect Transistor-Type Sensors Based on Conjugated Molecules

Recent advances of electrochemical and optical point-of-care biosensors for detecting neurotransmitter serotonin biomarkers

Since its discovery in 1984, the monoamine serotonin (5-HT) has been recognized for its critical role as a neuromodulator in both the central and peripheral nervous systems. Recent research reveals that serotonin also significantly influences various neuronal activities. Historically, it was believed that peripheral serotonin, produced by tryptophan hydroxylase in intestinal cells, functioned primarily as a hormone. However, new insights have expanded its known roles, necessitating advanced detection methods. Biosensors have emerged as indispensable tools in biomedical diagnostics, enabling the rapid and minimally invasive detection of target analytes with high spatial and temporal resolution. This review summarizes the progress made in the past decade in developing optical and electrochemical biosensors for serotonin detection. We evaluate various sensing strategies that optimize performance in terms of detection limits, sensitivity, and specificity. The study also explores recent innovations in biosensing technologies utilizing surface-modified electrodes with nanomaterials, including gold, graphite, carbon nanotubes, and metal oxide particles. Applications range from in vivo studies to chemical imaging and diagnostics, highlighting future prospects in the field.

A Fully Edible Transistor Based on a Toothpaste Pigment

Edible electronics is emerging in recent years motivated by a diverse number of healthcare applications, where sensors can be safely ingested without the need for any medical supervision. However, the current lack of stable and well-performing edible semiconductors needs to be addressed to reach technological maturity and allow the surge of a new generation of edible circuits. In the quest for good-performing edible semiconductors, this study has explored the possibility of considering materials that are not regulated for intentional ingestion, yet are daily swallowed with no adverse reactions, such as pigments contained in toothpaste. This work first elaborates on the basis of inadvertent ingestion data to estimate the quantity of daily ingested Copper(II) Phthalocyanine (CuPc), a whitening pigment and well-known organic semiconductor. Subsequently, CuPc is employed in the first demonstration of fully edible electrolyte-gated transistors operating at low voltage (<1 V), displaying good reproducibility and stable performance for over a year. The results indicate that, with the daily ingested quantity of CuPc from toothpaste, more than 104 edible transistors can be realized, thus paving the way to edible circuits, a critical component of future edible electronic systems.

Sensing Interfaces Engineering for Organic Thin Film Transistors-Based Biosensors: Opportunities and Challenges

Organic thin film transistors (OTFTs) enable rapid and label-free high-sensitivity detection of target analytes due to their low cost, large-area processing, biocompatibility, and inherent signal amplification. At the same time, the freedom of synthesis, tailorability, and functionalization of organic semiconductor materials and their ability to be combined with flexible substrates make them one of the ideal platforms for biosensing. However, OTFTs-based biosensors still face significant challenges, such as unexpected surface adsorption, disordered conformation, inhomogeneous graft density, and flexibility of probe molecules that biological sensing probes would face during immobilization. In this review, efficient immobilization strategies based on OTFTs biological sensing probes developed in the last 5 years are highlighted. First, the biosensors are classified according to their sensing interface. Second, a comprehensive discussion of the types of biological sensing probes is presented. Third, three commonly used methods for immobilizing biological sensing probes and their challenges are briefly described. Finally, the applications of OTFTs-based biosensors for liquid phase detection are summarized. This review provides a comprehensive and timely review of optimization in sensing interface engineering so that efficient immobilization of biological sensing probes with sensing interfaces will contribute to the development of high-performance OTFTs-based biosensors.

Dopant Enhanced Conjugated Polymer Thin Film for Low-Power, Flexible and Wearable DMMP Sensor

Conjugated polymer has the potential to be applied on flexible devices as an active layer, but further investigation is still hindered by poor conductivity and mechanical stability. Here, this work demonstrates a dopant-enhanced conductive polymer thin film and its application in dimethyl methylphosphonate (DMMP) sensor. Among five comparable polymers this work employs, poly(bisdodecylthioquaterthiophene) (PQTS12) achieves the highest doping efficiency after doped by FeCl3, with the conductivity increasing by about five orders of magnitude. The changes in Young's modulus are also considered to optimize the conductivity and flexibility of this thin film, and finally the decay of conductivity is only 9.2% after 3000 times of mechanical bending. This work applies this thin film as the active layer of the DMMP gas sensor, which could be operated under 1 mV driving voltage and 28 nW power consumption, with a sustainable durability against bending and compression. In addition, this sensor is provided with alarm capability while exposed to the DMMP atmospheres at different hazard levels. This work expects that this general approach could offer solutions for the fabrication of low-power and flexible gas sensors, and provide guidance for next-generation wearable devices with broader applications.

Selective Detection of Functionalized Carbon Particles based on Polymer Semiconducting and Conducting Devices as Potential Particulate Matter Sensors

This paper reports a new mechanism for particulate matter detection and identification. Three types of carbon particles are synthesized with different functional groups to mimic the real particulates in atmospheric aerosol. After exposing polymer-based organic devices in organic field effect transistor (OFET) architectures to the particle mist, the sensitivity and selectivity of the detection of different types of particles are shown by the current changes extracted from the transfer curves. The results indicate that the sensitivity of the devices is related to the structure and functional groups of the organic semiconducting layers, as well as the morphology. The predominant response is simulated by a model that yielded values of charge carrier density increase and charge carriers delivered per unit mass of particles. The research points out that polymer semiconductor devices have the ability to selectively detect particles with multiple functional groups, which reveals a future direction for selective detection of particulate matter.

Self-Assembled Monolayers for Interfacial Engineering in Solution-Processed Thin-Film Electronic Devices: Design, Fabrication, and Applications

Interfacial engineering has long been a vital means of improving thin-film device performance, especially for organic electronics, perovskites, and hybrid devices. It greatly facilitates the fabrication and performance of solution-processed thin-film devices, including organic field effect transistors (OFETs), organic solar cells (OSCs), perovskite solar cells (PVSCs), and organic light-emitting diodes (OLEDs). However, due to the limitation of traditional interfacial materials, further progress of these thin-film devices is hampered particularly in terms of stability, flexibility, and sensitivity. The deadlock has gradually been broken through the development of self-assembled monolayers (SAMs), which possess distinct benefits in transparency, diversity, stability, sensitivity, selectivity, and surface passivation ability. In this review, we first showed the evolution of SAMs, elucidating their working mechanisms and structure-property relationships by assessing a wide range of SAM materials reported to date. A comprehensive comparison of various SAM growth, fabrication, and characterization methods was presented to help readers interested in applying SAM to their works. Moreover, the recent progress of the SAM design and applications in mainstream thin-film electronic devices, including OFETs, OSCs, PVSCs and OLEDs, was summarized. Finally, an outlook and prospects section summarizes the major challenges for the further development of SAMs used in thin-film devices.

Enhanced N-type Semiconducting Performance of Asymmetric Monochlorinated Isoindigo-based Semiregioregular Polymers under Dynamic Forces

The asymmetric monochlorination strategy not only effectively addresses the steric issues in conventional dichlorination but also enables the development of promising acceptor units and semiregioregular polymers. Herein, monochlorinated isoindigo (1CIID) is successfully designed and synthesized by selectively introducing single chlorine (Cl) atoms. Furthermore, the 1CIID copolymerizes with two donor counterparts, centrosymmetric 2,2'-bithiophene (2T) and axisymmetric 4,7-di(thiophen-2-yl)benzo[1,2,5]thiadiazole (DTBT), forming two polymers, P1CIID-2T and P1CIID-DTBT. These polymers exhibit notable differences in backbone linearity and dipole moments, influenced by the symmetry of their donor counterparts. In particular, P1CIID-2T, which contains a centrosymmetric 2T unit, demonstrates a linear backbone and a significant dipole moment of 10.20 D. These properties contribute to the favorable film morphology of P1CIID-2T, characterized by highly ordered crystallinity in the presence of fifth-order (500) X-ray diffraction peaks. Notably, P1CIID-2T exhibits a significant improvement in molecular alignment under dynamic force, resulting in over 8-fold improvement in the performance of organic field-effect transistor (OFET) devices, with superior electron mobility up to 1.22 cm2 V-1 s-1. This study represents the first synthesis of asymmetric monochlorinated isoindigo-based conjugated polymers, highlighting the potential of asymmetric monochlorination for developing n-type semiconducting polymers. Moreover, our findings provide valuable insights into the relationship between the molecular structure and properties.

Synthesis, Photophysical Properties and Self-Assembly of a Tetraphenylethylene-Naphthalene Diimide Donor-Acceptor Molecule

The development of new π-conjugated molecular structures with controlled self-assembly and distinct photophysical properties is crucial for advancing applications in optoelectronics and biomaterials. This study introduces the synthesis and detailed self-assembly analysis of tetraphenylethylene (TPE) functionalized naphthalene diimide (NDI), a novel donor-acceptor molecular structure referred to as TPE-NDI. The investigation specifically focuses on elucidating the self-assembly behavior of TPE-NDI in mixed solvents of varying polarities, namely chloroform: methylcyclohexane (CHCl3 : MCH) and chloroform: methanol (CHCl3 : MeOH). Employing a several analytical methodologies, including UV-Vis absorption and fluorescence emission spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and dynamic light scattering (DLS), these self-assembled systems have been comprehensively examined. The results reveal that TPE-NDI manifests as distinct particles in CHCl3 : MCH (fMCH =90 %), while transitioning to flower-like assemblies in CHCl3 : MeOH (fMeOH =90 %). This finding underscores the critical role of solvent polarity in dictating the morphological characteristics of TPE-NDI self-assembled aggregates. Furthermore, the study proposes a molecular packing mechanism, based on SEM data, offering significant insights into the design and development of functional supramolecular systems. Such advancements in understanding the molecular self-assembly new π-conjugated molecular structures are anticipated to pave the way for novel applications in material science and nanotechnology.

Recent Progress in Gas Sensors Based on P3HT Polymer Field-Effect Transistors

In recent decades, the rapid development of the global economy has led to a substantial increase in energy consumption, subsequently resulting in the emission of a significant quantity of toxic gases into the environment. So far, gas sensors based on polymer field-effect transistors (PFETs), a highly practical and cost-efficient strategy, have garnered considerable attention, primarily attributed to their inherent advantages of offering a plethora of material choices, robust flexibility, and cost-effectiveness. Notably, the development of functional organic semiconductors (OSCs), such as poly(3-hexylthiophene-2,5-diyl) (P3HT), has been the subject of extensive scholarly investigation in recent years due to its widespread availability and remarkable sensing characteristics. This paper provides an exhaustive overview encompassing the production, functionalization strategies, and practical applications of gas sensors incorporating P3HT as the OSC layer. The exceptional sensing attributes and wide-ranging utility of P3HT position it as a promising candidate for improving PFET-based gas sensors.

MOF-Assimilated High-Sensitive Organic Field-Effect Transistors for Rapid Detection of a Chemical Warfare Agent

The selective and rapid detection of trace amounts of highly toxic chemical warfare agents has become imperative for efficiently using military and civilian defense. Metal-organic frameworks (MOFs) are a class of inorganic-organic hybrid porous material that could be potential next-generation toxic gas sensors. However, the growth of a MOF thin film for efficiently utilizing the material properties for fabricating electronic devices has been challenging. Herein, we report a new approach to efficiently integrate MOF as a receptor through diffusion-induced ingress into the grain boundaries of the pentacene semiconducting film in the place of the most adaptive chemical functionalization method for sensor fabrication. We used bilayer conducting channel-based organic field-effect transistors (OFETs) as a sensing platform comprising CPO-27-Ni as the sensing layer, coated on the pentacene layer, showed a strong response toward sensing of diethyl sulfide, which is one of the stimulants of bis (2-chloroethyl) sulfide, a highly toxic sulfur mustard (HD). Using OFET as a sensing platform, these sensors can be a potential candidate for trace amounts of sulfur mustard detection below 10 ppm in real time as wearable devices for onsite uses.

Impact of Planar and Vertical Organic Field-Effect Transistors on Flexible Electronics

The development of flexible and conformable devices, whose performance can be maintained while being continuously deformed, provides a significant step toward the realization of next-generation wearable and e-textile applications. Organic field-effect transistors (OFETs) are particularly interesting for flexible and lightweight products, because of their low-temperature solution processability, and the mechanical flexibility of organic materials that endows OFETs the natural compatibility with plastic and biodegradable substrates. Here, an in-depth review of two competing flexible OFET technologies, planar and vertical OFETs (POFETs and VOFETs, respectively) is provided. The electrical, mechanical, and physical properties of POFETs and VOFETs are critically discussed, with a focus on four pivotal applications (integrated logic circuits, light-emitting devices, memories, and sensors). It is pointed out that the flexible function of the relatively newer VOFET technology, along with its perspective on advancing the applicability of flexible POFETs, has not been reviewed so far, and the direct comparison regarding the performance of POFET- and VOFET-based flexible applications is most likely absent. With discussions spanning printed and wearable electronics, materials science, biotechnology, and environmental monitoring, this contribution is a clear stimulus to researchers working in these fields to engage toward the plentiful possibilities that POFETs and VOFETs offer to flexible electronics.

Highly Sensitive and Selective Organic Gas Sensors Based on Nitrided ZSM-5 Zeolite

For next-generation gas sensors, conductive polymers have strong potential for overcoming the existing deficiencies of conventional inorganic sensors based on metallic oxides. However, the signal of organic gas sensors is inferior to that of inorganic metal oxide gas sensors because of organic gas sensors' poor charge carrier transport. Herein, the combination of an organic transistor-type gas sensor and a zeolite with strong gas-adsorbing properties is proposed and experimentally demonstrated. Among the various investigated zeolites, ZSM-5 with ∼5.5 Å pore openings enhanced the adsorption for small gas molecules when combined with a polymer active layer, where it provided a pathway for gas molecules to penetrate the zeolite channels. Moreover, nitrided ZSM-5 (N-ZSM-5) enhanced the sensing performance of NO₂ molecules selectively because N in the N-ZSM-5 framework strongly interacted with NO₂ molecules. These results open the possibility for zeolite-modified organic gas sensors that selectively adsorb target gas molecules via heteroatoms substituted into the zeolite framework.

Self-Healing Polymers for Electronics and Energy Devices

Polymers are extensively exploited as active materials in a variety of electronics and energy devices because of their tailorable electrical properties, mechanical flexibility, facile processability, and they are lightweight. The polymer devices integrated with self-healing ability offer enhanced reliability, durability, and sustainability. In this Review, we provide an update on the major advancements in the applications of self-healing polymers in the devices, including energy devices, electronic components, optoelectronics, and dielectrics. The differences in fundamental mechanisms and healing strategies between mechanical fracture and electrical breakdown of polymers are underlined. The key concepts of self-healing polymer devices for repairing mechanical integrity and restoring their functions and device performance in response to mechanical and electrical damage are outlined. The advantages and limitations of the current approaches to self-healing polymer devices are systematically summarized. Challenges and future research opportunities are highlighted.

Organic small molecule semiconductor materials for OFET-based biosensors

Biosensors is an advanced detection and monitoring device for the development of biotechnology, and is also a rapid and microanalytical device at the molecular level. Demands for high sensitivity, high flexibility, good biocompatibility, easy chemical modification and low cost offer incentive for exploring new materials to develop the next-generation biosensors. With the vigorous development of organic electronics, the performances of organic devices have been effectively improved, leading to organic semiconductor materials with low cost, good flexibility, easy chemical modification and good biocompatibility for biosensors. Biosensors based on organic field-effect transistors (OFETs) have become one of the most advanced biosensor platforms because of their inherent ability to amplify received signals. Furthermore, OFET-based biosensors have been widely used in the detection of DNA, protein, cell, glucose and other biological substances due to its high sensitivity, fast analysis speed, label-free detection, small size and simple operation. This mini review briefly discusses the organic small molecule semiconductor materials, device configurations, basic principles and application fields of OFETs-based biosensors.

A Road Map toward Field-Effect Transistor Biosensor Technology for Early Stage Cancer Detection

Field effect transistor (FET)-based nanoelectronic biosensor devices provide a viable route for specific and sensitive detection of cancer biomarkers, which can be used for early stage cancer detection, monitoring the progress of the disease, and evaluating the effectiveness of therapies. On the road to implementation of FET-based devices in cancer diagnostics, several key issues need to be addressed: sensitivity, selectivity, operational conditions, anti-interference, reusability, reproducibility, disposability, large-scale production, and economic viability. To address these well-known issues, significant research efforts have been made recently. An overview of these efforts is provided here, highlighting the approaches and strategies presently engaged at each developmental stage, from the design and fabrication of devices to performance evaluation and data analysis. Specifically, this review discusses the multistep fabrication of FETs, choice of bioreceptors for relevant biomarkers, operational conditions, measurement configuration, and outlines strategies to improve the sensing performance and reach the level required for clinical applications. Finally, this review outlines the expected progress to the future generation of FET-based diagnostic devices and discusses their potential for detection of cancer biomarkers as well as biomarkers of other noncommunicable and communicable diseases.

Aggregation Modes of Chiral Diketopyrrolo[3,4-c]pyrrole Dyes in Solution and Thin Films

The chiroptical features of chiral diketopyrrolo[3,4-c]pyrrole (DPP) derivatives have been only marginally investigated to date. In this regard, we have synthesized ad hoc four chiral DPP dyes, functionalized with enantiopure alkyl groups from natural sources either on the lactam moieties or on the terminal positions of the π-conjugated backbone, to promote an efficient self-assembly into chiral supramolecular structures. For each of them, the aggregation modes has been investigated by absorbance and ECD spectroscopies in conditions of solution aggregation and on thin films, considering the effects of deposition technique (drop casting vs. spin coating) and post-deposition operations (solvent and thermal annealing). The effect of the structure of lateral π-conjugated units attached to the central DPP scaffold, as well as that of the position of the alkyl chiral group, has been assessed. ECD revealed superior capability, compared to absorbance spectroscopy, to provide information on the aggregation modes and to detect the possible co-existence of multiple aggregation pathways.

Microstructural Control of Soluble Acene Crystals for Field-Effect Transistor Gas Sensors

Microstructural control during the solution processing of small-molecule semiconductors (namely, soluble acene) is important for enhancing the performance of field-effect transistors (FET) and sensors. This focused review introduces strategies to enhance the gas-sensing properties (sensitivity, recovery, selectivity, and stability) of soluble acene FET sensors by considering their sensing mechanism. Defects, such as grain boundaries and crystal edges, provide diffusion pathways for target gas molecules to reach the semiconductor-dielectric interface, thereby enhancing sensitivity and recovery. Representative studies on grain boundary engineering, patterning, and pore generation in the formation of soluble acene crystals are reviewed. The phase separation and microstructure of soluble acene/polymer blends for enhancing gas-sensing performance are also reviewed. Finally, flexible gas sensors using soluble acenes and soluble acene/polymer blends are introduced, and future research perspectives in this field are suggested.

Design, Synthesis, and Application in OFET of a Quinoxaline-Based D-A Conjugated Polymer

A novel alternating donor–acceptor polymer PQ1 is designed and synthesized by palladium-catalyzed Stille coupling between quinoxaline as an electron-deficient unit and indacenodithiophene (IDT) as electron-rich groups. Polymer PQ1 presents not only a strong intramolecular charge transfer effect, which is beneficial for the charge transport within single molecules but also a narrow electrochemical band gap and a high highest occupied molecular orbital (HOMO) energy level. In addition, the optical absorption study indicates that the PQ1 film exhibits good aggregation, which is an advantage for the charge transport between neighboring molecules. As a consequence, PQ1 presents p-type semiconductor properties with a high hole mobility of up to 0.12 cm² V⁻¹ s⁻¹. This study reveals the great potential of quinoxaline-type chromophores in constructing novel organic semiconductors.

Research Progress of Intramolecular π-Stacked Small Molecules for Device Applications

Organic semiconductors can be designed and constructed in π-stacked structures instead of the conventional π-conjugated structures. Through-space interaction (TSI) occurs in π-stacked optoelectronic materials. Thus, unlike electronic coupling along the conjugated chain, the functional groups can stack closely to facilitate spatial electron communication. Using π-stacked motifs, chemists and materials scientists can find new ways for constructing materials with aggregation-induced emission (AIE), thermally activated delayed fluorescence (TADF), circularly polarized luminescence (CPL), and room-temperature phosphorescence (RTP), as well as enhanced molecular conductance. Organic optoelectronic devices based on π-stacked molecules have exhibited very promising performance, with some of them exceeding π-conjugated analogues. Recently, reports on various organic π-stacked structures have grown rapidly, prompting this review. Representative molecular scaffolds and newly developed π-stacked systems could stimulate more attention on through-space charge transfer the well-known through-bond charge transfer. Finally, the opportunities and challenges for utilizing and improving particular materials are discussed. The previous achievements and upcoming prospects may provide new insights into the theory, materials, and devices in the field of organic semiconductors.

Sensors for Volatile Organic Compounds

This paper provides an overview of recent developments in the field of volatile organic compound (VOC) sensors, which are finding uses in healthcare, safety, environmental monitoring, food and agriculture, oil industry, and other fields. It starts by briefly explaining the basics of VOC sensing and reviewing the currently available and quickly progressing VOC sensing approaches. It then discusses the main trends in materials' design with special attention to nanostructuring and nanohybridization. Emerging sensing materials and strategies are highlighted and their involvement in the different types of sensing technologies is discussed, including optical, electrical, and gravimetric sensors. The review also provides detailed discussions about the main limitations of the field and offers potential solutions. The status of the field and suggestions of promising directions for future development are summarized.

Single Molecule Level and Label-Free Determination of Multibiomarkers with an Organic Field-Effect Transistor Platform in Early Cancer Diagnosis

The single molecule level determination with a transistor (SiMoT) platform has attracted considerable attention in the recognition of various ultralow abundance biomolecules, while complicated labeling and testing processes limit its further applications. Recently, organic field-effect transistor (OFET)-based biosensors are good candidates for constructing an advanced label-free SiMoT platform due to their facile fabrication process, rapid response time, and low sample volume with a wide range of detection. However, the sensitivity of most OFET-based biosensors is in the order of nM and pM, which cannot meet the detection requirements of ultralow abundance protein. Herein, a label-free SiMoT platform is demonstrated by integrating pillar[n]arene as a signal amplifier, and the detection limit can reach 4.75 aM. Besides, by simultaneous determination of α-fetoprotein, carcinoembryonic antigen, and prostate antigen, the proposed multiplexed OFET-based SiMoT platform provides a key step in reliable early cancer diagnosis.

Two-Dimensional Field-Effect Transistor Sensors: The Road toward Commercialization

The evolutionary success in information technology has been sustained by the rapid growth of sensor technology. Recently, advances in sensor technology have promoted the ambitious requirement to build intelligent systems that can be controlled by external stimuli along with independent operation, adaptivity, and low energy expenditure. Among various sensing techniques, field-effect transistors (FETs) with channels made of two-dimensional (2D) materials attract increasing attention for advantages such as label-free detection, fast response, easy operation, and capability of integration. With atomic thickness, 2D materials restrict the carrier flow within the material surface and expose it directly to the external environment, leading to efficient signal acquisition and conversion. This review summarizes the latest advances of 2D-materials-based FET (2D FET) sensors in a comprehensive manner that contains the material, operating principles, fabrication technologies, proof-of-concept applications, and prototypes. First, a brief description of the background and fundamentals is provided. The subsequent contents summarize physical, chemical, and biological 2D FET sensors and their applications. Then, we highlight the challenges of their commercialization and discuss corresponding solution techniques. The following section presents a systematic survey of recent progress in developing commercial prototypes. Lastly, we summarize the long-standing efforts and prospective future development of 2D FET-based sensing systems toward commercialization.

Wearable electrochemical biosensors to measure biomarkers with complex blood-to-sweat partition such as proteins and hormones

Smart electronic devices based on micro-controllers, also referred to as fashion electronics, have raised wearable technology. These devices may process physiological information to facilitate the wearer's immediate biofeedback in close contact with the body surface. Standard market wearable devices detect observable features as gestures or skin conductivity. In contrast, the technology based on electrochemical biosensors requires a biomarker in close contact with both a biorecognition element and an electrode surface, where electron transfer phenomena occur. The noninvasiveness is pivotal for wearable technology; thus, one of the most common target tissues for real-time monitoring is the skin. Noninvasive biosensors formats may not be available for all analytes, such as several proteins and hormones, especially when devices are installed cutaneously to measure in the sweat. Processes like cutaneous transcytosis, the paracellular cell–cell unions, or even reuptake highly regulate the solutes content of the sweat. This review discusses recent advances on wearable devices based on electrochemical biosensors for biomarkers with a complex blood-to-sweat partition like proteins and some hormones, considering the commented release regulation mechanisms to the sweat. It highlights the challenges of wearable epidermal biosensors (WEBs) design and the possible solutions. Finally, it charts the path of future developments in the WEBs arena in converging/emerging digital technologies.

Ultrasensitive N-Channel Graphene Gas Sensors by Nondestructive Molecular Doping

Sensitive and selective detection of target gases is the ultimate goal for commercialization of graphene gas sensors. Here, ultrasensitive n-channel graphene gas sensors were developed by using n-doped graphene with ethylene amines. The exposure of the n-doped graphene to oxidizing gases such as NO₂ leads to a current decrease that depends strongly on the number of amine functional groups in various types of ethylene amines. Graphene doped with diethylenetriamine (DETA) exhibits the highest response, recovery, and long-term sensing stability to NO₂, with an average detection limit of 0.83 parts per quadrillion (ppq, 10^-15), due to the attractive electrostatic interaction between electron-rich graphene and electron-deficient NO₂. Our first-principles calculation supported a preferential adsorption of NO₂ on n-doped graphene. In addition, gas molecules on the n-channel graphene provide charged impurities, thereby intensifying the current decrease for an excellent response to oxidizing gases such as NO₂ or SO₂. On the contrary, absence of such a strong interaction between NH₃ and DETA-doped graphene and combined effects of current increase by n-doping and mobility decrease by charged impurities result in a completely no response to NH₃. Because the n-channel is easily induced by a top-molecular dopant, a flexible graphene sensor with outstanding NO₂ detection capability was successfully fabricated on plastic without vertical stacks of gate-electrode and gate-dielectric. Our gate-free graphene gas sensors enabled by nondestructive molecular n-doping could be used for the selective detection of subppq-level NO₂ in a gas mixture with reducing gases.

Magnetic Field-Induced Self-Assembly of Conjugated Block Copolymers and Nanoparticles at the Air-Water Interface

Here, we report the magnetic field-induced self-assembly of a conjugated block copolymer, poly(3-hexylthiopene)-block-poly(ethylene glycol) (P3HT-b-PEG), and iron oxide nanoparticles (IONPs) at the air-water interface. Binary self-assembly of P3HT-b-PEG and IONPs at the interface results in nanoparticle-embedded P3HT-b-PEG nanowire arrays with a micrometer-scale domain size. Under the magnetic field, the field-induced magnetic interaction significantly improves the degree of order, generating long-range ordered, direction-controlled nanoarrays of P3HT-b-PEG and IONPs, where IONPs are aligned in the direction of the magnetic field over a sub-millimeter scale. The size of IONPs is an important factor for the formation of an ordered assembly structure at the nanometer scale, as it dictates the magnetic dipole interaction and the entropic interaction between nanoparticles and polymers. The consideration of magnetic dipole interactions suggests that the field-induced self-assembly occurs through the formation of intermediate magnetic subunits composed of short IONP strings along the semirigid P3HT nanowires, which can be aligned through the magnetic interactions, ultimately driving the long-range ordered self-assembly. This study demonstrates for the first time that the magnetic field-induced self-assembly can be used to generate macroscopically ordered polymer films with a nanometer-scale order in low fields.

A Review on Solution-Processed Organic Phototransistors and Their Recent Developments

Today, more disciplines are intercepting each other, giving rise to “cross-disciplinary” research. Technological advancements in material science and device structure and production have paved the way towards development of new classes of multi-purpose sensory devices. Organic phototransistors (OPTs) are photo-activated sensors based on organic field-effect transistors that convert incident light signals into electrical signals. The organic semiconductor (OSC) layer and three-electrode structure of an OPT offer great advantages for light detection compared to conventional photodetectors and photodiodes, due to their signal amplification and noise reduction characteristics. Solution processing of the active layer enables mass production of OPT devices at significantly reduced cost. The chemical structure of OSCs can be modified accordingly to fulfil detection at various wavelengths for different purposes. Organic phototransistors have attracted substantial interest in a variety of fields, namely biomedical, medical diagnostics, healthcare, energy, security, and environmental monitoring. Lightweight and mechanically flexible and wearable OPTs are suitable alternatives not only at clinical levels but also for point-of-care and home-assisted usage. In this review, we aim to explain different types, working mechanism and figures of merit of organic phototransistors and highlight the recent advances from the literature on development and implementation of OPTs for a broad range of research and real-life applications.

Design strategies for improving the crystallinity of covalent organic frameworks and conjugated polymers: a review

Highly crystalline covalent organic frameworks (COFs) or conjugated polymers (CPs) are very important and highly desirable because these materials would display better performance in diverse devices and provide more structure-property related information. However, how to achieve highly crystalline or single-crystal COFs and CPs is very challenging. Recently, many research studies have demonstrated the possibility of enhancing the crystallinity of COFs and CPs. Thus, it is timely to offer an overview of the important progress in improving the crystallinity of COFs and CPs from the viewpoint of design strategies. These strategies include polycondensation reaction optimization, improving the planarity, fluorine substitution, side chain engineering, and so on. Furthermore, the challenges and perspectives are also discussed to promote the realization of highly crystalline or single-crystal COFs and CPs.

Transistor-Based Biomolecule Sensors: Recent Technological Advancements and Future Prospects

Transistor-based sensors have been widely recognized to be highly sensitive and reliable for point-of-care/bed-side diagnosis. In this line, a range of cutting-edge technologies has been generated to elevate the role of transistors for biomolecule detection. Detection of a wide range of clinical biomarkers has been reported using various configurations of transistors. The inordinate sensitivity of transistors to the field-effect imparts high sensitivity toward wide range of biomolecules. This overview has gleaned the present achievements with the technological advancements using high performance transistor-based sensors. This review encloses transistors incorporated with a variety of functional nanomaterials and organic elements for their excellence in selectivity and sensitivity. In addition, the technological advancements in fabrication of these microdevices or nanodevices and functionalization of the sensing elements have also been discussed. The technological gap in the realization of sensors in transistor platforms and the resulted scope for research has been discussed. Finally, foreseen technological advancements and future research perspectives are described.

Electrohydrodynamic-Jet-Printed Cinnamate-Fluorinated Cross-Linked Polymeric Dielectrics for Flexible and Electrically Stable Operating Organic Thin-Film Transistors and Integrated Devices

Herein, printable polymer series containing different portions of cinnamate and perfluorinated phenyl functionalities, namely, polyperfluorostyrene-co-poly(vinylbenzyl cinnamates) (PFS-co-PVBCi (x:y)) copolymers, were synthesized and applied as gate dielectrics for organic thin-film transistors (OTFTs). The polymeric dielectrics were successfully printed via electrostatic force-assisted dispensing mode of electrohydrodynamic jet printing. The dielectric characteristics of the printed polymers, such as surface energy, dielectric constant, leakage current, atomic depth profiles, and deposited semiconducting layer characteristics, were clearly identified. In particular, the difference in driving stability of OTFTs according to the type of polymer was analyzed in detail and a possible mechanism was proposed. Results suggested that PFS-co-PVBCi (3:7) led to optimized consequences, yielding an almost negligible V_th shift under continuous bias stress. Through this, we successfully implemented flexible OTFT and logic devices using printed PFS-co-PVBCi (3:7) dielectrics with stable operation properties. Therefore, we believe that this study will facilitate the printing and synthesis of polymer dielectrics to produce printed and flexible OTFTs.

High-performance and wearable hazardous gases sensor based on n-n heterojunction film of NGO and tetrakis(1-pyrenyl)porphyrin

The popularity of "Internet of Things" and portable electronic devices creates unprecedented demands for wearable gas sensors with excellent performance. In this study, the flexible n-n heterojunction film is firstly produced from metalloporphyrin complex 5,10,15,20-tetrakis(1-pyrenyl) porphyrin cobalt (II) (CoTPyrP) and nitrogen-doped graphene oxide (NGO) film, using solution-processing quasi-Langmuir-Shäfer (QLS) method and employed as the electrochemical identification layer for the wearable sensor. Thanks to the attractive electron-transfer properties from porphyrin to NGO, and the local regulation of electron transport by N and C atoms with different electronegativity on NGO, the resulting sensor shows good responses to NO₂, SO₂, NH₃, H₂S gases with the low detection limit (LOD) of 6, 74, 113 and 178 ppb, respectively. The uniform and compact structure of the heterojunction films provide excellent mechanical flexibility and suppress the penetration of gases into the film to obtain fast recovery speed. In addition, a sensor array consisting of NGO/CoTPyrP heterojunction and CoTPyrP film sensor is established, achieving selective identification of four hazardous gases. The present work provides potential application for hazardous gases identification in actual systems, and proposes an effective method to develop new flexible n-n heterojunctions for wearable gas sensors.

Rapid Detection of SARS-CoV-2 Antigens and Antibodies Using OFET Biosensors Based on a Soft and Stretchable Semiconducting Polymer

In the midst of the COVID-19 pandemic, adaptive solutions are needed to allow us to make fast decisions and take effective sanitation measures, e.g., the fast screening of large groups (employees, passengers, pupils, etc.). Although being reliable, most of the existing SARS-CoV-2 detection methods cannot be integrated into garments to be used on demand. Here, we report an organic field-effect transistor (OFET)-based biosensing device detecting of both SARS-CoV-2 antigens and anti-SARS-CoV-2 antibodies in less than 20 min. The biosensor was produced by functionalizing an intrinsically stretchable and semiconducting triblock copolymer (TBC) film either with the anti-S1 protein antibodies (S1 Abs) or receptor-binding domain (RBD) of the S1 protein, targeting CoV-2-specific RBDs and anti-S1 Abs, respectively. The obtained sensing platform is easy to realize due to the straightforward fabrication of the TBC film and the utilization of the reliable physical adsorption technique for the molecular immobilization. The device demonstrates a high sensitivity of about 19%/dec and a limit of detection (LOD) of 0.36 fg/mL for anti-SARS-Cov-2 antibodies and, at the same time, a sensitivity of 32%/dec and a LOD of 76.61 pg/mL for the virus antigen detection. The TBC used as active layer is soft, has a low modulus of 24 MPa, and can be stretched up to 90% with no crack formation of the film. The TBC is compatible with roll-to-roll printing, potentially enabling the fabrication of low-cost wearable or on-skin diagnostic platforms aiming at point-of-care concepts.

Significant Performance Improvement in n-Channel Organic Field-Effect Transistors with C60 :C70 Co-Crystals Induced by Poly(2-ethyl-2-oxazoline) Nanodots

Solution-processed organic field-effect transistors (OFETs) have attracted great interest due to their potential as logic devices for bendable and flexible electronics. In relation to n-channel structures, soluble fullerene semiconductors have been widely studied. However, they have not yet met the essential requirements for commercialization, primarily because of low charge carrier mobility, immature large-scale fabrication processes, and insufficient long-term operational stability. Interfacial engineering of the carrier-injecting source/drain (S/D) electrodes has been proposed as an effective approach to improve charge injection, leading also to overall improved device characteristics. Here, it is demonstrated that a non-conjugated neutral dipolar polymer, poly(2-ethyl-2-oxazoline) (PEOz), formed as a nanodot structure on the S/D electrodes, enhances electron mobility in n-channel OFETs using a range of soluble fullerenes. Overall performance is especially notable for (C60 -Ih )[5,6]fullerene (C60 ) and (C70 -D5h(6) )[5,6]fullerene (C70 ) blend films, with an increase from 0.1 to 2.1 cm2 V-1 s-1 . The high relative mobility and eighteen-fold improvement are attributed not only to the anticipated reduction in S/D electrode work function but also to the beneficial effects of PEOz on the formation of a face-centered-cubic C60 :C70 co-crystal structure within the blend films.

Recent Advances of Nanospheres Lithography in Organic Electronics

Nanospheres lithography (NSL) is an economical technique, which makes use of highly monodispersed nanospheres such as deposition or etch masks for generating patterns with nanoscale features. Embedding nanostructures into organic electronic devices can endow them with unique capabilities and enhanced performance, which have greatly advanced the development of organic electronics. In this review, a brief summary of the methods for the preparation of monodispersed nanospheres is presented. Afterward, the authors highlight the recent advances of a wide variety of applications of nanospheres lithography in organic electronic devices. Finally, the challenges in this field are pointed out, and the future development of this field is discussed.

Real-Time Detection of Glyphosate by a Water-Gated Organic Field-Effect Transistor with a Microfluidic Chamber

This paper reports the development of a real-time monitoring system utilizing the combination of a water-gated organic field-effect transistor (WG-OFET) and a microfluidic chamber for the detection of the herbicide glyphosate (GlyP). For the realization of the real-time sensing with the WG-OFET, the surface of a polymer semiconductor was utilized as a sensing unit. The aqueous solution including the target analyte, which is employed as a gate dielectric of the WG-OFET, flows into a designed microfluidic chamber on the semiconductor layer and the gate electrode. As the sensing mechanism, the WG-OFET-based sensor utilizes the competitive complexation among carboxylate-functionalized polythiophene, a copper(II) (Cu²⁺) ion, and GlyP. The reversible accumulation and desorption of the positively charged Cu²⁺ ion on the semiconductor surface induced a change in the electrical double-layer capacitance (EDLC). The optimization of the microfluidic chamber enables a uniform water flow and contributes to real-time quantitative sensing of GlyP at a micromolar level. Thus, this study would lead to practical real-time sensing in water for various fields including environmental assessment.

An Oligonucleotide-Distortion-Responsive Organic Transistor for Platinum-Drug-Induced DNA-Damage Detection

Organic transistor with DNA-damage evaluation ability can open up novel opportunities for bioelectronic devices. Even though trace amounts of drugs can cause cumulative gene damage in vivo, the extremely low occurrence proportion makes them hardly transduced into detectable electric signals. Here, an ultrasensitive DNA-damage sensor based on an oligonucleotide-distortion-responsive organic transistor (DROT) is reported by creating controllable conformation change of double-stranded DNA on the surface of organic semiconductors. In combination with interfacial charge redistribution and efficient signal amplification, the DROT provides an ultrasensitive single-site DNA-damage response with 20.5 s even upon 1 × 10-12 m cisplatin. The high generalizability of this DROT to three generations of classical platinum drugs and gene-relevant DNA damage is demonstrated. A biochip is further designed for intelligent damage analysis in complex environments, which holds the potential for high-throughput biotoxicity evaluation and drug screening in the future.

Organic Semiconductors at the University of Washington: Advancements in Materials Design and Synthesis and toward Industrial Scale Production

Research at the University of Washington regarding organic semiconductors is reviewed, covering four major topics: electro-optics, organic light emitting diodes, organic field-effect transistors, and organic solar cells. Underlying principles of materials design are demonstrated along with efforts toward unlocking the full potential of organic semiconductors. Finally, opinions on future research directions are presented, with a focus on commercial competency, environmental sustainability, and scalability of organic-semiconductor-based devices.

Metal-Organic Framework as a Functional Analyte Channel of Organic-Transistor-Based Air Pollution Sensors

Air pollution sensors based on organic transistors have attracted much interest recently; however, the devices suffer from low responsivity and slow response and recovery rates for gas analytes. These shortcomings are attributed to the low charge-carrier mobility of organic semiconductors and to a structural limitation resulting from the use of a thick and continuous active layer. In the present work, we investigated the material properties of a multiscale porous zeolitic imidazolate framework, [Zn(2-methylimidazole)₂]_n (ZIF-8), and examined its potential as an analyte channel material inserted at an organic-transistor active layer. A series of carbonized zeolitic imidazolate frameworks (ZIFs) were prepared by thermal conversion of ZIF-8 and also studied for comparison. The microstructures, morphologies, and optical/electrical characteristics of polythiophene/ZIF-8 hybrid films were systematically investigated. Organic-transistor-type nitrogen dioxide sensors based on the polythiophene/ZIF-8 hybrid films showed substantially improved sensing properties, including responsivity, response rate, and recovery rate. The electrical conductivity of the carbonized ZIF-8s enhanced the field-effect mobility of the organic transistors; however, the sensing performance was not improved, because of the closed pore structures resulting from the carbonization. These results provide invaluable information and useful insights into the design of transistor-type gas sensors based on organic semiconductor/metal-organic framework hybrid films.

A Hippocampus-Inspired Dual-Gated Organic Artificial Synapse for Simultaneous Sensing of a Neurotransmitter and Light

Organic neuromorphic devices and sensors that mimic the functions of chemical synapses and sensory perception in humans have received much attention for next-generation computing and integrated logic circuits. Despite recent advances, organic artificial synapses capable of detecting both neurotransmitters in liquid environments and light are not reported. Herein, inspired by hippocampal synapses, a dual-gate organic synaptic transistor platform with a photoconductive polymer semiconductor, a ferroelectric insulator of P(VDF-TrFE), and an extended-gate electrode functionalized with boronic acid is developed to simultaneously detect the neurotransmitter dopamine and light. The developed synaptic transistor enables memory consolidation upon repetitive exposure to dopamine and polychromatic light, exhibiting effectively modulated postsynaptic currents. This proof-of-concept hippocampal-synapse-mimetic organic neuromorphic system combining a chemical sensor and a photosensor opens new possibilities for developing low-power organic artificial synaptic multisensors and light-induced memory consolidative artificial synapses, and can also contribute to the development of human-machine interfaces.

Strategy for Selective Printing of Gate Insulators Customized for Practical Application in Organic Integrated Devices

Direct drawing techniques have contributed to the ease of patterning soft electronic materials, which are the building blocks of analog and digital integrated circuits. In parallel with the printing of semiconductors and electrodes, selective deposition of gate insulators (GI) is an equally important factor in simplifying the fabrication of integrated devices, such as NAND and NOR gates, and memory devices. This study demonstrates the fabrication of six types of printed GI layers (high/low-k polymer and organic-inorganic hybrid material), which are utilized as GIs in organic field-effect transistors (OFETs), using the electrostatic-force-assisted dispensing printing technique. The selective printing of GIs on the gate electrodes enables us to develop practical integrated devices that go beyond unit OFET devices, exhibiting robust switching performances, non-destructive operations, and high gain values. Moreover, the flexible integrated devices fabricated using this technique exhibit excellent operational behavior. Therefore, this facile fabrication technique can pave a new path for the production of practical integrated device arrays for next-generation devices.

Interpenetrating Polymer Semiconductor Nanonetwork Channel for Ultrasensitive, Selective, and Fast Recovered Chemodetection

Organic semiconductor (OSC)-based gas detection has attracted considerable attention due to the facile manufacturing process and effective contact with target chemicals at room temperature. However, OSCs intrinsically suffer from inferior sensing and recovery capability due to lack of functional sites and deep gas penetration into the film. Here, we describe an interpenetrating polymer semiconductor nanonetwork (IPSN) channel possessing unreacted silanol (Si-OH) groups on its surface to overcome bottlenecks that come from OSC-based chemodetection. On the top of the IPSN, moreover, we introduced electron-donating amine (NH₂) groups as a chemical receptor because they strongly interact with the electron-withdrawing nature of NO₂ gas. The NH₂-IPSN-based field-effect transistor exhibited high-performance chemodetection such as ultrasensitivity (990% ppm^-1 at 5 ppm) and excellent NO₂ selectivity against other toxic gases. Impressively, the gas recovery was significantly improved because the NH₂ chemical receptors anchored on the surface of the IPSN suppress deep gas penetration into the film. This work demonstrates that our NO₂ chemodetection is expected to provide inspiration and guideline for realization of practical gas sensors in various industries and daily life.

Quintuple-Decker Heteroleptic Phthalocyanine Heterometallic Samarium-Cadmium Complexes. Synthesis, Crystal Structure, Electrochemical Behavior, and Spectroscopic Investigation

A one-pot synthesis methodology was employed for obtaining diverse quintuple-decker phthalocyanine heterometallic lanthanide-cadmium complexes. By using the reaction of a double-decker homoleptic/heteroleptic phthalocyanine samarium compound with metal-free phthalocyanine and cadmium acetate in 1,2,4-trichlorobenzene at 200 °C, two novel quintuple-decker heteroleptic phthalocyanine heterometallic samarium-cadmium compounds, {(Pc)Sm(Pc)Cd(Pc*)Cd(Pc)Sm(Pc)} (1) and {(Pc)Sm(Pc*)Cd(Pc*)Cd(Pc*)Sm(Pc)} (2), together with one homoleptic phthalocyanine species, {(Pc*)Sm(Pc*)Cd(Pc*)Cd(Pc*)Sm(Pc*)} (3), were successfully fabricated, where H₂Pc and H₂Pc* represent unsubstituted phthalocyanine and 2,3,9,10,16,17,23,24-octakis(n-pentyloxy)phthalocyanine, respectively. Their quintuple-decker structures have been disclosed by various spectroscopic techniques and single-crystal X-ray diffraction. In addition, valence tautomerization of these three quintuple-decker complexes has been achieved by the addition of phenoxathiin hexachloroantimonate, giving three oxidized forms including one-, two-, and three-electron oxidation products. From 1 to 3 with the same oxidation state, the increased number of n-pentyloxy substituents of phthalocyanine ligands induces the blue shift of electronic absorption in the IR region due to the increased gap associated with the introduction of electron-donating substituents. In particular, the electronic absorption spectra of one- and two-electron oxidation products for 1 exhibit a rare band in the middle-IR region around 3000 nm, being one of the farthest electronic transitions captured by UV-vis spectroscopy. The three-electron oxidation product of 1 displays two bands at 2231 and 2740 nm, respectively. These data are well confirmed by IR spectroscopic data and theoretical calculation results.

Self-Healing of Electrical Damage in Polymers

Polymers are widely used as dielectric components and electrical insulations in modern electronic devices and power systems in the industrial sector, transportation, and large appliances, among others, where electrical damage of the materials is one of the major factors threatening the reliability and service lifetime. Self-healing dielectric polymers, an emerging category of materials capable of recovering dielectric and insulating properties after electrical damage, are of promise to address this issue. This paper aims at summarizing the recent progress in the design and synthesis of self-healing dielectric polymers. The current understanding to the process of electrical degradation and damage in dielectric polymers is first introduced and the critical requirements in the self-healing of electrical damage are proposed. Then the feasibility of using self-healing strategies designed for repairing mechanical damage in the healing of electrical damage is evaluated, based on which the challenges and bottleneck issues are pointed out. The emerging self-healing methods specifically designed for healing electrical damage are highlighted and some useful mechanisms for developing novel self-healing dielectric polymers are proposed. It is concluded by providing a brief outlook and some potential directions in the future development toward practical applications in electronics and the electric power industry.

Organic Heterojunction Devices Based on Phthalocyanines: A New Approach to Gas Chemosensing

Organic heterostructures have emerged as highly promising transducers to realize high performance gas sensors. The key reason for such a huge interest in these devices is the associated organic heterojunction effect in which opposite free charges are accumulated at the interface making it highly conducting, which can be exploited in producing highly sensitive and faster response kinetics gas sensors. Metal phthalocyanines (MPc) have been extensively studied to fabricate organic heterostructures because of the large possibilities of structural engineering which are correlated with their bulk thin film properties. Accordingly, in this review, we have performed a comprehensive literature survey of the recent researches reported about MPc based organic heterostructures and their application in gas sensors. These heterostructures were used in Organic Field-Effect Transistor and Molecular Semiconductor-Doped Insulator sensing device configurations, in which change in their electrical properties such as field-effect mobility and saturation current in the former and current at a fixed bias in the latter under redox gases exposure were assessed to determine the chemosensing performances. These sensing devices have shown very high sensitivity to redox gases like nitrogen dioxide (NO2), ozone and ammonia (NH3), which monitoring is indispensable for implementing environmental guidelines. Some of these sensors exhibited ultrahigh sensitivity to NH3 demonstrated by a detection limit of 140 ppb and excellent signal stability under variable humidity, making them among the best NH3 sensors.

Kouzani A, Mosadegh B, Gharaie S. Blood Pressure Sensors: Materials, Fabrication Methods, Performance Evaluations and Future Perspectives

Advancements in materials science and fabrication techniques have contributed to the significant growing attention to a wide variety of sensors for digital healthcare. While the progress in this area is tremendously impressive, few wearable sensors with the capability of real-time blood pressure monitoring are approved for clinical use. One of the key obstacles in the further development of wearable sensors for medical applications is the lack of comprehensive technical evaluation of sensor materials against the expected clinical performance. Here, we present an extensive review and critical analysis of various materials applied in the design and fabrication of wearable sensors. In our unique transdisciplinary approach, we studied the fundamentals of blood pressure and examined its measuring modalities while focusing on their clinical use and sensing principles to identify material functionalities. Then, we carefully reviewed various categories of functional materials utilized in sensor building blocks allowing for comparative analysis of the performance of a wide range of materials throughout the sensor operational-life cycle. Not only this provides essential data to enhance the materials' properties and optimize their performance, but also, it highlights new perspectives and provides suggestions to develop the next generation pressure sensors for clinical use.