Determination of carbonyl compounds in beer by derivatisation and headspace solid-phase microextraction in combination with gas chromatography and mass spectrometry

High throughput identification of carbonyl compounds in natural organic matter by directional derivatization combined with ultra-high resolution mass spectrometry

Carbonyl compounds are important components of natural organic matter (NOM) with high reactivity, so that play a pivotal role in the dynamic transformation of NOM. However, due to the lack of effective analytical methods, our understanding on the molecular composition of these carbonyl compounds is still limited. Here, we developed a high-throughput screening method to detect carbonyl molecules in complex NOM samples by combining chemical derivatization with electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR-MS). In six different types of dissolved organic matter (DOM) samples tested in this study, 20-30 % of detected molecules contained at least one carbonyl group, with relative abundance accounted for 45-70 %. These carbonyl molecules displayed lower unsaturation level, lower molecular weight, and higher oxidation degree compared to non-carbonyl molecules. More importantly, the measured abundances of carbonyl molecules were consistent with the results of 13C nuclear magnetic resonance (NMR) analysis. Based on this method, we found that carbonyl molecules can be produced at DOM-ferrihydrite interface, thus playing a role in shaping the molecular diversity of DOM. This method has broad application prospects in screening carbonyl compounds from complex mixtures, and the same strategy can be used to directional identification of molecules with other functional groups as well.

Effect of Coriander Seed Addition at Different Stages of Brewing on Selected Parameters of Low-Alcohol Wheat Beers

In recent years, there has been a significant decline in interest in high-alcohol beers, while interest in low- and non-alcohol beers is growing. The aim of this study was to investigate the influence of the addition of coriander seeds at various stages of the production of low-alcohol wheat beer (mashing, boiling, and fermentation). The presented article uses biological methods to produce low-alcohol beer. For this purpose, first, the mashing process was modified (breaking 44 °C for 20 min, followed by 75 °C for 60 min). The chemical composition and aroma components of the obtained beers were determined using various chromatographic methods (HPLC, GC-MS, and GC-O). Differences were found between the aroma components depending on the stage of production at which the coriander seeds were added. Beers with the addition of coriander seeds at the fermentation stage had the highest terpene content (linalool, camphor, trans-linalool oxide, and γ-terpinene) and boiling (myrcene, limonene, citronellol, and geraniol). The least desirable process is the addition of coriander seeds at the mashing stage due to the lowest content of volatile compounds. Additionally, beers with the addition of coriander seeds for fermentation were characterized by a higher content of antioxidant compounds. This proves that the addition of coriander seeds during beer production could improve the fermentation process and modify the quality of the obtaining beer.

Development of a Fully Automated Method HS-SPME-GC-MS/MS for the Determination of Odor-Active Carbonyls in Wines: a "Green" Approach to Improve Robustness and Productivity in the Oenological Analytical Chemistry

The aim of this study was the optimization and validation of a green, robust, and comprehensive method for the determination of volatile carbonyl compounds (VCCs) in wines that could be added as a new quality control tool for the evaluation of a complete fermentation, correct winemaking style, and proper bottling and storage. A HS-SPME-GC-MS/MS method was optimized and automated using the autosampler to improve overall performance. A solvent-less technique and a strong minimization of all volumes were implemented to comply with the green analytical chemistry principles. There were as many as 44 VCC (mainly linear aldehydes, Strecker aldehydes, unsaturated aldehydes, ketones, and many other) analytes under investigation. All compounds showed a good linearity, and the LOQs were abundantly under the relevant perception thresholds. Intraday, 5-day interday repeatability, and recovery performances in a spiked real sample were evaluated showing satisfactory results. The method was applied to determine the evolution of VCCs in white and red wines after accelerated aging for 5 weeks at 50 °C. Furans and linear and Strecker aldehydes were the compounds that showed the most important variation; many VCCs increased in both classes of samples, whereas some showed different behaviors between white and red cultivars. The obtained results are in strong accordance with the latest models on carbonyl evolution related to wine aging.

Differentiating Huangjiu with Varying Sugar Contents from Different Regions Based on Targeted Metabolomics Analyses of Volatile Carbonyl Compounds

Huangjiu is one of the oldest alcoholic beverages in the world. It is usually made by fermenting grains, and Qu is used as a saccharifying and fermenting agent. In this study, we identified differential carbonyl compounds in Huangjiu with varying sugar contents from different regions. First, we developed and validated a detection method for volatile carbonyl compounds in Huangjiu, and for optimal extraction, 5 mL of Huangjiu and 1.3 g/L of O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine hydrochloride (PFBHA) were incubated at 45 °C for 5 min before extracting the volatile carbonyl compounds at 45 °C for 35 min. Second, the targeted quantitative analysis of 50 carbonyl compounds in Huangjiu showed high levels of Strecker aldehydes and furans. Finally, orthogonal projections to latent structures discriminant analysis (OPLS-DA) was used to differentiate between Huangjiu with different sugar contents, raw materials, and region of origin. A total of 19 differential carbonyl compounds (VIP > 1, p < 0.05) were found in Huangjiu with different sugar contents (semidry and semisweet Huangjiu), and 20 differential carbonyl compounds (VIP > 1, p < 0.05) were found in different raw materials for Huangjiu production (rice and nonrice Huangjiu). A total of twenty-two and eight differential carbonyl compounds, with VIP > 1 and p < 0.05, were identified in semidry and semisweet Huangjiu from different regions (Zhejiang, Jiangsu, Shanghai, and Fujian), respectively.

α-Dicarbonyl compounds in food products: Comprehensively understanding their occurrence, analysis, and control

α-Dicarbonyl compounds (α-DCs) are readily produced during the heating and storage of foods, mainly through the Maillard reaction, caramelization, lipid-peroxidation, and enzymatic reaction. They contribute to both the organoleptic properties (i.e., aroma, taste, and color) and deterioration of foods and are potential indicators of food quality. α-DCs are also important precursors to hazardous substances, such as acrylamide, furan, advanced lipoxidation end products, and advanced glycation end products, which are genotoxic, neurotoxic, and linked to several diseases. Recent studies have indicated that dietary α-DCs can elevate plasma α-DC levels and lead to "dicarbonyl stress." To accurately assess their health risks, quantifying α-DCs in food products is crucial. Considering their low volatility, inability to absorb ultraviolet light, and high reactivity, the analysis of α-DCs in complex food systems is a challenge. In this review, we comprehensively cover the development of scientific approaches, from extraction, enrichment, and derivatization, to sophisticated detection techniques, which are necessary for quantifying α-DCs in different foods. Exposure to α-DCs is inevitable because they exist in most foods. Recently, novel strategies for reducing α-DC levels in foods have become a hot research topic. These strategies include the use of new processing technologies, formula modification, and supplementation with α-DC scavengers (e.g., phenolic compounds). For each strategy, it is important to consider the potential mechanisms underlying the formation and removal of process contaminants. Future studies are needed to develop techniques to control α-DC formation during food processing, and standardized approaches are needed to quantify and compare α-DCs in different foods.

Volatile metabolome and floral transcriptome analyses reveal the volatile components of strongly fragrant progeny of Malus × robusta

Floral fragrance is an important trait that contributes to the ornamental properties and pollination of crabapple. However, research on the physiological and molecular biology of the floral volatile compounds of crabapple is rarely reported. In this study, metabolomic and transcriptomic analyses of the floral volatile compounds of standard Malus robusta flowers (Mr), and progeny with strongly and weakly fragrant flowers (SF and WF, respectively), were conducted. Fifty-six floral volatile compounds were detected in the plant materials, mainly comprising phenylpropane/benzene ring-type compounds, fatty acid derivatives, and terpene compounds. The volatile contents were significantly increased before the early flowering stage (ES), and the contents of SF flowers were twice those of WF and Mr flowers. Odor activity values were determined for known fragrant volatiles and 10-11 key fragrant volatiles were identified at the ES. The predominant fragrant volatiles were methyl benzoate, linalool, leaf acetate, and methyl anthranilate. In the petals, stamens, pistil, and calyx of SF flowers, 26 volatiles were detected at the ES, among which phenylpropane/benzene ring-type compounds were the main components accounting for more than 75% of the total volatile content. Functional analysis of transcriptome data revealed that the phenylpropanoid biosynthesis pathway was significantly enriched in SF flowers. By conducting combined analyses between volatiles and differentially expressed genes, transcripts of six floral scent-related genes were identified and were associated with the contents of the key fragrant volatiles, and other 23 genes were potentially correlated with the key volatile compounds. The results reveal possible mechanisms for the emission of strong fragrance by SF flowers, and provide a foundation for improvement of the floral fragrance and development of new crabapple cultivars.

Development of a Rapid and Sensitive Fluorescence Sensing Method for the Detection of Acetaldehyde in Alcoholic Beverages

Acetaldehyde is regarded as an important flavor compound in alcoholic beverages. With the advantages of rapidity, low cost and high sensitivity, fluorescent probe could be used as a new tool for the detection of acetaldehyde. Here, an effective fluorescence sensing method based on fluorescent probe N1 (FPN1) was established in this study. The function of FPN1 relies on the nucleophile substitution reaction and photoinduced electron transfer (PET), resulting in a fluorescence increase. Remarkably, the pretreatment background removal method (BRM) was successfully applied for removal of the interference of pyruvate and acetal. The linearity range (LR), limit of detection (LOD) and recovery of the fluorescence sensing method with BRM were 0.0053–200 mg/L, 0.0016 mg/L and 94.02–108.12%, respectively, which showed a broader detection range and better performance on sensitivity compared with the traditional quantitation using gas chromatography (GC). Furthermore, successful application of the method in real samples indicated the advantages of low-cost and rapidity for small-scale detection while assuring the accuracy, which provides a new strategy for the detection of acetaldehyde concentration in alcoholic beverages.

Approaches to Formaldehyde Measurement: From Liquid Biological Samples to Cells and Organisms

Formaldehyde (FA) is the simplest aldehyde present both in the environment and in living organisms. FA is an extremely reactive compound capable of protein crosslinking and DNA damage. For a long time, FA was considered a “biochemical waste” and a by-product of normal cellular metabolism, but in recent decades the picture has changed. As a result, the need arose for novel instruments and approaches to monitor and measure not only environmental FA in water, cosmetics, and household products, but also in food, beverages and biological samples including cells and even organisms. Despite numerous protocols being developed for in vitro and in cellulo FA assessment, many of them have remained at the “proof-of-concept” stage. We analyze the suitability of different methods developed for non-biological objects, and present an overview of the recently developed approaches, including chemically-synthesized probes and genetically encoded FA-sensors for in cellulo and in vivo FA monitoring. We also discuss the prospects of classical methods such as chromatography and spectrophotometry, and how they have been adapted in response to the demand for precise, selective and highly sensitive evaluation of FA concentration fluctuations in biological samples. The main objectives of this review is to summarize data on the main approaches for FA content measurement in liquid biological samples, pointing out the advantages and disadvantages of each method; to report the progress in development of novel molecules suitable for application in living systems; and, finally, to discuss genetically encoded FA-sensors based on existing natural biological FA-responsive elements.

The role of endogenous versus exogenous sources in the exposome of putative genotoxins and consequences for risk assessment

The "totality" of the human exposure is conceived to encompass life-associated endogenous and exogenous aggregate exposures. Process-related contaminants (PRCs) are not only formed in foods by heat processing, but also occur endogenously in the organism as physiological components of energy metabolism, potentially also generated by the human microbiome. To arrive at a comprehensive risk assessment, it is necessary to understand the contribution of in vivo background occurrence as compared to the ingestion from exogenous sources. Hence, this review provides an overview of the knowledge on the contribution of endogenous exposure to the overall exposure to putative genotoxic food contaminants, namely ethanol, acetaldehyde, formaldehyde, acrylamide, acrolein, α,β-unsaturated alkenals, glycation compounds, N-nitroso compounds, ethylene oxide, furans, 2- and 3-MCPD, and glycidyl esters. The evidence discussed herein allows to conclude that endogenous formation of some contaminants appears to contribute substantially to the exposome. This is of critical importance for risk assessment in the cases where endogenous exposure is suspected to outweigh the exogenous one (e.g. formaldehyde and acrolein).

An experimental study of the gas-phase reaction between Cl atoms and trans-2-pentenal: Kinetics, products and SOA formation

The gas-phase reaction of trans-2-pentenal (T2P) with Cl atoms was studied at atmospheric pressure and room temperature. A rate coefficient of (2.56 ± 0.83) × 10^-10 cm³ molecule^-1 s^-1 was obtained using the relative rate method and isoprene, cyclohexane and ethanol as reference compounds. The kinetic study was carried out using a 300-L Teflon bag simulation chamber (IMT Lille Douai-France) and a 16-L Pyrex cell (UCLM-Ciudad Real-Spain), both coupled to the Fourier transform infrared (FTIR) technique. Gas-phase products and secondary organic aerosol (SOA) formation were studied at UCLM using a 16-L Pyrex cell and a 264-L quartz simulation chamber coupled to the FTIR and gas-chromatography-mass spectrometry (GC-MS) techniques. HCl, CO, and propanal were identified as products formed from the studied reaction and quantified by FTIR, the molar yield of the latter being (5.2 ± 0.2)%. Formic acid was identified as a secondary product and was quantified by FTIR with a yield of (6.2 ± 0.4)%. In addition, 2-chlorobutanal and 2-pentenoic acid were identified, but not quantified, by GC-MS as products. The SOA formation was investigated using a fast mobility particle sizer spectrometer. The observed SOA yields reached maximum values of around 7% at high particle mass concentrations. This work provides the first study of the formation of gaseous and particulate products for the reaction of Cl with T2P. A reaction mechanism is suggested to explain the formation of the observed gaseous products. The results are discussed in terms of structure-reactivity relationship, and the atmospheric implications derived from this study are commented as well.

Monitoring the evolution of free and cysteinylated aldehydes from malt to fresh and forced aged beer

During storage, beer staling coincides with a gradual increase in the concentrations of aldehydes resulting in the appearance of undesirable flavours. Cysteinylated aldehydes, also referred to as 2-substituted 1,3-thiazolidine-4-carboxylic acids, have been proposed as potential precursors of this increase. This study aimed to further understand the origin of aldehydes in aged beer, by monitoring both free and cysteinylated aldehydes throughout the brewing process, from the raw materials until the stored product. Quantification of free and cysteinylated aldehydes was performed for two different brews via headspace solid phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) and ultra-high performance liquid chromatography-mass spectrometry (UHPLC-MS), respectively. All selected marker aldehydes were quantified in malt, wort, and the resulting fresh and aged beer samples. Cysteinylated aldehydes were quantifiable in malt and up to the wort boiling phase. The highest levels of free aldehydes were found in malt, whereas cysteinylated aldehydes showed highest levels at mashing-in pointing to their formation during both malting and subsequent mashing-in. During beer ageing, an increase in all free aldehydes was measured. In particular, a rise in 2-methylpropanal and furfural is most striking. Although the presented experimental data obtained on malt and brewery samples do support the concept of bound-state aldehydes, cysteinylated aldehydes cannot be consider as the cause of increasing levels of staling aldehydes during beer ageing.

Beer volatile fingerprinting at different brewing steps

Volatile fingerprints of a lager beer were carried out throughout five brewing steps to characterize the changes encompassing this process. Overall, 60 volatile organic metabolites (VOMs) were identified by headspace solid-phase microextraction followed by gas chromatography mass spectrometry (HS-SPME/GC-MS). Specific profiles were observed at different brewing steps - aldehydes and furans dominate in wort, whereas the aliphatic esters and alcohols predominate in the following steps. Such variations can be assigned to specific VOMs, as 3-methylbutanal (wort), ethyl alcohol and ethyl octanoate (fermentation, maturation and filtration), or ethyl alcohol and isoamyl acetate (final product). These VOMs can influence the beer final flavour. Ethyl alcohol contributes to its strong and pungent smell and taste, while isoamyl acetate adds intense 'fruity' and 'banana' odours. These beer volatile fingerprints constitute a valuable tool to obtain insights on the impact of each brewing step on the final product, being also very useful for certification purposes.

Fast and sensitive detection of acrolein in environmental water samples without derivatization using liquid chromatography tandem mass spectrometry

A fast and sensitive SPE-LC-MS/MS method for the determination of acrolein in environmental water samples using activated charcoal as SPE adsorbent was developed. The novelty of this study consists in acrolein extraction, separation and detection without the need of a derivatization process. Physicochemical properties of acrolein, such as low molecular weight and high polarity represent real challenges for extraction, separation, and detection of this pollutant using SPE-LC-MS/MS. These were addressed by choosing a suitable chromatographic column which ensures a good peak symmetry and retention for the analyte, as well as the choice of SPE adsorbent suitable for retaining very polar compounds like acrolein from the aqueous matrix. The chromatographic column was a Synergi Fusion RP (150 × 2.0 mm, 4.0 μm) with a C18 stationary phase modified with polar embedded amide groups. Activated charcoal adsorbent used as SPE extraction media was able to extract efficiently highly polar molecules such as acrolein and ¹³C₃-acrylamide (internal standard) from water samples. Using this method, the obtained extraction recovery for acrolein was 88% at a 50 ng/L concentration level. Overall method quantitation limit (LOQ) for acrolein in water was established at 3.8 ng/L. The newly developed SPE-LC-MS/MS method was successfully applied to detect acrolein occurrence in wastewater and drinking water samples. Acrolein level in these samples ranged from LOQ to 122 ng/L.

Validation of an analytical method using HS-SPME-GC/MS-SIM to assess the exposure risk to carbonyl compounds and furan derivatives through beer consumption

Compounds with toxic potential may occur in beer, such as carbonyl compounds (acetaldehyde, acrolein, ethyl carbamate [EC] and formaldehyde) and furan derivatives [furfural and furfuryl alcohol (FA)]. The objective of this study was, for the first time, to validate a method based on headspace-solid phase microextraction using a PDMS-overcoated fibre and gas chromatography with mass spectrometric detection in selected ion monitoring mode (HS-SPME-GC/MS-SIM) to investigate target carbonyl compounds and furan derivatives in beers. Analytical curves showed proper linearity with r² ranging from 0.9731 to 0.9960 for acetaldehyde and EC, respectively. The lowest LOD was found for acetaldehyde (0.03 µg L^-1), while the lowest LOQ value (1.0 µg L^-1) was found for acetaldehyde and EC, formaldehyde and furfural. Recovery (90% to 105%), intermediate precision and repeatability (lower than 13%), limits of detection and quantification (values below 2.5 μg L^-1) showed that the method is suitable to simultaneously quantify these compounds. EC was detected in only two samples (1 lager and 1 ale). Furfural was found in 37% and 82% of ale and lager beers, respectively. Acetaldehyde, acrolein, formaldehyde and FA were detected in all samples. However, acrolein was the only compound found in the commercial samples at a concentration capable of causing health risk. Besides furfural and FA, four other furan-containing compounds (5-methyl-2-furan methanethiol, acetylfuran, 5-methylfurfural and γ-nonalactone) were also found in beers, however, at levels low enough not to impose potential health risk.

A Bottom-Up Approach for Data Mining in Bioaromatization of Beers Using Flow-Modulated Comprehensive Two-Dimensional Gas Chromatography/Mass Spectrometry

In this study, we report the combination of comprehensive two-dimensional gas chromatography (GC×GC) with multivariate pattern recognition through template matching for the assignment of the contribution of Brazilian Ale 02 yeast strain to the aroma profile of beer compared with the traditional Nottingham yeast. Volatile organic compounds (VOC) from two beer samples, which were fermented with these yeast strains were sampled using headspace solid-phase microextraction (HS-SPME). The aroma profiles from both beer samples were obtained using GC×GC coupled to a fast scanning quadrupole mass spectrometer. Data processing performed through multiway principal components analysis succeeded in separating both beer samples based on yeast strain. The execution of a simple and reliable procedure succeeded and identified 46 compounds as relevant for sample classification. Furthermore, the bottom-up approach spotted compounds found exclusively in the beer sample fermented with the Brazilian yeast, highlighting the bioaromatization properties introduced to the aroma profile by this yeast strain.

New trends in beer flavour compound analysis

As the beer market is steadily expanding, it is important for the brewing industry to offer consumers a product with the best organoleptic characteristics, flavour being one of the key characteristics of beer. New trends in instrumental methods of beer flavour analysis are described. In addition to successfully applied methods in beer analysis such as chromatography, spectroscopy, nuclear magnetic resonance, mass spectrometry or electronic nose and tongue techniques, among others, sample extraction and preparation such as derivatization or microextraction methods are also reviewed.

Characterization of key odorants in Chinese chixiang aroma-type liquor by gas chromatography-olfactometry, quantitative measurements, aroma recombination, and omission studies

Chixiang aroma-type liquor is extensively welcomed by consumers owing to its typical fatty aroma, particularly in southern China. To our knowledge, no comprehensive characterization of aroma and flavor from chixiang aroma-type liquor has been published. It is still a confused question which components are the most important in characterizing its unique aroma. A total of 56 odorants were identified in chixiang aroma-type liquor by aroma extract dilution analysis (AEDA), and in different quantitative measurements, 34 aroma compounds were further demonstrated as important odorants according to odor activity values (OAVs). Furthermore, this research suggested that the aroma of chixiang aroma-type finished liquor could be successfully reconstituted by mixing 34 aroma compounds in the concentrations measured. Omission experiments further confirmed (E)-2-nonenal as the key odorant and revealed the significance of (E)-2-octenal and 2-phenylethanol for the overall aroma of chixiang aroma-type liquor. 3-(Methylthio)-1-propanol (methionol), diethyl 1,7-heptanedioate (diethyl pimelate), diethyl 1,8-octanedioate (diethyl suberate), and diethyl 1,9-nonanedioate (diethyl azelate), identified as the characteristic aromas of chixiang aroma-type liquor in 1995, had no effects on aroma based on omission/addition experiments.

NMR investigation of acrolein stability in hydroalcoholic solution as a foundation for the valid HS-SPME/GC-MS quantification of the unsaturated aldehyde in beverages

Acrolein (propenal) is found in many foods and beverages and may pose a health hazard due to its cytotoxicity. Considerable knowledge gaps regarding human exposure to acrolein exist, and there is a lack of reliable analytical methods. Hydroalcoholic dilutions prepared for calibration purposes from pure acrolein show considerable degradation of the compound and nuclear magnetic resonance (NMR) spectroscopy showed that 1,3,3-propanetriol and 3-hydroxypropionaldehyde are formed. The degradation can be prevented by addition of hydroquinone as stabilizer to the calibration solutions, which then show linear concentration-response behaviour required for quantitative analysis. The stabilized calibration solutions were used for quantitative headspace solid-phase microextraction/gas chromatography-mass spectrometry (HS-SPME/GC-MS) determination of acrolein in alcoholic beverages with a detection limit of 14 μg L(-1). Of 117 tested alcoholic beverages, 64 were tested positive with the highest incidence in grape marc spirits and whiskey (100%, mean 252 μg L(-1)), followed by fruit spirits (86%, mean 591 μg/L(-1)), tequila (86%, mean 404 μg L(-1)), Asian spirits (43%, mean 54 μg L(-1)) and wine (9%, mean 0.7 μg L(-1)). Acrolein could not be detected in beer, vodka, absinthe and bottled water. Six of the fruit and grape marc spirits had acrolein levels above the World Health Organization (WHO) provisional tolerable concentration of 1.5 mg L(-1).

Biological production of 2-butanone in Escherichia coli

An Escherichia coli (E. coli) strain was engineered to synthesize 2-butanone from glucose by extending the 2,3-butanediol synthesis reaction sequence catalyzed by exogenous enzymes. To convert 2,3-butanediol to 2-butanone, B12-dependent glycerol dehydratase from Klebsiella pneumoniae was introduced into E. coli. It has been proposed that the enzyme has a weak activity toward 2,3-butanediol. The activity in E. coli is confirmed in this study. Furthermore, co-expressing coenzyme B12 reactivators increased the 2-butanone titer. This demonstration of 2-butanone production by extending the 2,3-butanediol biosynthetic pathway provides the possibility to produce this valuable chemical renewably.

Thermally induced process-related contaminants: the example of acrolein and the comparison with acrylamide: opinion of the Senate Commission on Food Safety (SKLM) of the German Research Foundation (DFG)

α,β-Unsaturated aliphatic carbonyl compounds are naturally widespread in food, but are also formed during the thermal treatment of food. This applies, for example, to the genotoxic carcinogen acrylamide (AA), but also to acrolein (AC), the simplest α,β-unsaturated aldehyde. First observations indicate that human exposure to AC may be higher than the exposure to AA. The DFG Senate Commission on Food Safety therefore compared data on AC and AA available in the scientific literature, evaluating current knowledge on formation, occurrence, exposure, metabolism, biological effects, toxicity, and carcinogenicity and defined knowledge gaps as well as research needs in an opinion on November 19, 2012, in German. The English version was agreed on April 17, 2013.

In situ aqueous derivatization as sample preparation technique for gas chromatographic determinations

The use of derivatization reactions is a common practice in analytical laboratories. Although in many cases it is tedious and time-consuming, it does offer a good alternative for the determination of analytes not compatible to gas chromatography. Many of the reactions reported in the literature occur in organic medium. However, in situ aqueous derivatization reactions, which can be performed directly in aqueous medium, offer important advantages over those mentioned above, such as no need of a previous extraction step and easy automation. Here we review the most recent developments and applications of in situ aqueous derivatization. The discussion focuses on the derivatization reactions used for the determination of alcohols and phenols, carboxylic acids, aldehydes and ketones, nitrogen-containing compounds and thiols in different aqueous matrices, such as environmental, biological and food samples. Several reactions are described for each functional group (acylation, alkylation, esterification, among others) and, in some cases, the same reagents can be used for several functional groups, such that there is an unavoidable overlap between sections. Finally, attention is also focused on the techniques used for the introduction of the derivatives formed in the aqueous medium into the chromatographic system. The implementation of in situ aqueous derivatization coupled to preconcentration techniques has permitted the enhancement of recoveries and improvements in the separation, selectivity and sensitivity of the analytical methods.

Cytotoxicity of α-dicarbonyl compounds submitted to in vitro simulated digestion process

α-Dicarbonyl compounds (α-DCs), such as glyoxal, methylglyoxal and 2,3-butanedione, are highly reactive substances occurring in thermally treated and fermented foods, that may react with amino and sulphydryl groups of side chains of proteins to form Maillard reaction end products, inducing a negative impact on the digestibility and on nutritional value of protein. In recent years the role of food derived α-DCs in gastroduodenal tract is under investigation to understand whether excess consumption of such dietary compounds might be a risk for human health. In this study the interactions between a mixture of glyoxal, methylglyoxal and 2,3-butanedione and the digestive enzymes (pepsin and pancreatin) were studied. The results showed that during gastroduodenal digestion α-DCs react with digestive enzymes to produce carbonylated proteins. Moreover, undigested and digested α-DC cytotoxicity against human cells, as well as their ability to inhibit the function of human enzymes responsible for DNA repair were shown.