A method for determining glyphosate and its metabolite aminomethyl phosphonic acid by gas chromatography-flame photometric detection

Chromatographic Methods for the Determination of Glyphosate in Cereals Together with a Discussion of Its Occurrence, Accumulation, Fate, Degradation, and Regulatory Status

The European Union's recent decision to renew the authorization for the use of glyphosate until 15 December 2033 has stimulated scientific discussion all around the world regarding its toxicity or otherwise for humans. Glyphosate is a chemical of which millions of tons have been used in the last 50 years worldwide to dry out weeds in cultivated fields and greenhouses and on roadsides. Concern has been raised in many areas about its possible presence in the food chain and its consequent adverse effects on health. Both aspects that argue in favor of toxicity and those that instead may indicate limited toxicity of glyphosate are discussed here. The widespread debate that has been generated requires further investigations and field measurements to understand glyphosate's fate once dispersed in the environment and its concentration in the food chain. Hence, there is a need for validated analytical methods that are available to analysts in the field. In the present review, methods for the analytical determination of glyphosate and its main metabolite, AMPA, are discussed, with a specific focus on chromatographic techniques applied to cereal products. The experimental procedures are explained in detail, including the cleanup, derivatization, and instrumental conditions, to give the laboratories involved enough information to proceed with the implementation of this line of analysis. The prevalent chromatographic methods used are LC-MS/MS, GC-MS/SIM, and GC-MS/MS, but sufficient indications are also given to those laboratories that wish to use the better performing high-resolution MS or the simpler HPLC-FLD, HPLC-UV, GC-NPD, and GC-FPD techniques for screening purposes. The concentrations of glyphosate from the literature measured in wheat, corn, barley, rye, oats, soybean, and cereal-based foods are reported, together with its regulatory status in various parts of the world and its accumulation mechanism. As for its accumulation in cereals, the available data show that glyphosate tends to accumulate more in wholemeal flours than in refined ones, that its concentration in the product strictly depends on the treatment period (the closer it is to the time of harvesting, the higher the concentration), and that in cold climates, the herbicide tends to persist in the soil for a long time.

A new cysteamine-copper chemically modified screen-printed gold electrode for glyphosate determination

A chemically modified screen-printed gold electrode has been prepared by covering the electrode surface with a cysteamine-copper self-assembled monolayer (SAM). The sensor was effective for the voltammetric sensing of glyphosate. The method exploits the interaction of glyphosate with copper ions complexed by cysteamine, which results in a decrease in the intensity of copper redox current. Cyclic voltammetry was employed as a measuring technique. When dealing with voltammograms with numerous peaks changing in shape and size, it is difficult to define which signal is the most significant for the analyte determination; in these cases, a helpful approach is chemometrics. In this work, PLS (Partial Least Square regression) has been applied to build models to correlate the signal with the glyphosate concentration in standard aqueous solutions and tap water samples (matrix-matched calibration). The method's figures of merits were evaluated, obtaining a limit of quantification of about 5 μM. The reliability of the proposed sensor was verified by analyzing tap water spiked with glyphosate; recoveries higher than 90 % were achieved.

GLYPHOSATE IMPACT on human health and the environment: Sustainable alternatives to replace it in Mexico

Glyphosate is a broad-spectrum, non-selective herbicide used to control weeds and protect agricultural crops, and it is classified as potentially carcinogenic by the International Agency for Research on Cancer. In Mexico, the use of pesticides is a common practice, including glyphosate. However, on December 31st, 2020, the Mexican government decreed the prohibition of this herbicide as of January 2024. In this review, we investigate the association between glyphosate and cancer risk and found that most of the studies focused using animals showing negative effects such as genotoxicity, cytotoxicity and neurotoxicity, some studies used cancer cell lines showing proliferative effects due to glyphosate exposure. To our knowledge, in Mexico, there are no scientific reports on the association of glyphosate with any type of cancer. In addition, we reviewed the toxicological effects of the herbicide glyphosate, and the specific case of the current situation of the use and environmental damage of this herbicide in Mexico. We found that few studies have been published on glyphosate, and that the largest number of publications are from the International Agency for Research on Cancer classification to date. Additionally, we provide data on glyphosate stimulation at low doses as a biostimulant in crops and analytical monitoring techniques for the detection of glyphosates in different matrices. Finally, we have tried to summarize the actions of the Mexican government to seek sustainable alternatives and replace the use of glyphosate, to obtain food free of this herbicide and take care of the health of the population and the environment.

A novel Cu(II)-assisted peptide fluorescent probe for highly sensitive detection of glyphosate in real samples: real application in test strips and smartphone

Glyphosate (Glyp) is an organophosphorus herbicide, and its abuse causes potential harm to the environment and human health. Thus, the development of simple and portable methods for rapid and visual detection of glyphosate is of great importance. Herein, we successfully developed a new fluorescent probe L with dansyl fluorophore as a fluorescent dye and tetrapeptide (Ala-Ser-Arg-His-NH2) as a recognition group. According to the design, L exhibited a specific fluorescence quenching response to Cu2+ and formed an L-Cu2+ ensemble with a molecular ratio of 2:1, demonstrating a limit of detection (LOD) as low as 12.04 nM. Interestingly, the L-Cu2+ ensemble as a relay response probe exhibited a specific fluorescence "off-on" response to glyphosate without interference from other pesticides and anions based on the strong complexation of glyphosate and Cu2+. The LOD of the L-Cu2+ ensemble for glyphosate was calculated as 12.59 nM. Additionally, the results of three recovery experiments with real samples showed that L has good practicability and accuracy in detecting glyphosate. Test strips were also fabricated to achieve facile detection of glyphosate to demonstrate the practical application potential of the L-Cu2+ ensemble. The L-Cu2+ ensemble was integrated with a smartphone for semi-quantification of glyphosate in a field environment under a 365 nm UV lamp.

Adsorption of glyphosate and metabolite aminomethylphosphonic acid (AMPA) from water by polymer-based spherical activated carbon (PBSAC)

Glyphosate (GLY) is the most commonly used herbicide worldwide, and aminomethylphosphonic acid (AMPA) is its main metabolite. Their occurrence in ground and surface waters causes diseases in humans, while complex physico-chemical properties hinder detection and effective removal. Polymer-based spherical activated carbon (PBSAC) can adsorb many micropollutants efficiently and, hence, overcome the shortfalls of conventional treatment methods. The static adsorption of a mixture of GLY and AMPA by PBSAC was investigated with varying PBSAC properties and relevant solution chemistry. The results show that PBSAC can remove 95% GLY and 57% AMPA from an initial concentration of 1 µg/L at pH 8.2. PBSAC properties (size, activation level, and surface charge) have a strong influence on herbicide removal, where surface area plays a key role. Low to neutral pH favors non-charge interactions and results in good adsorption, while higher temperatures equally enhance GLY/AMPA adsorption by PBSAC. The work demonstrated the effective removal of GLY to meet the European guideline concentration (0.1 µg/L), while AMPA could not be removed to the required level.

Hazardous impacts of glyphosate on human and environment health: Occurrence and detection in food

With the ever-increasing human population, farming lands are decreasing every year, therefore, for effective crop management; agricultural scientists are continually developing new strategies. However, small plants and herbs always impart a much loss in the yields of the crop and farmers are using tons of herbicides to eradicate that problem. Across the world, several herbicides are available in the market for effective crop management, however, scientists observed various environmental and health effects of the herbicides. Over the past 40 years, the herbicide glyphosate has been used extensively with the assumption of negligible effects on the environment and human health. However, in recent years, concerns have increased globally about the potential direct and indirect effects on human health due to the excessive use of glyphosate. As well, the toxicity on ecosystems and the possible effects on all living creatures have long been at the center of a complex discrepancy about the authorization for its use. The World Health Organization also further classified glyphosate as a carcinogenic toxic component and it was banned in 2017 due to numerous life-threatening side effects on human health. In the present era, the residues of banned glyphosate are more prevalent in agricultural and environmental samples which are directly affecting human health. Various reports revealed the detailed extraction process of glyphosate from different categories of the food matrix. Therefore, in the present review, to reveal the importance of glyphosate monitoring in the food matrix, we discussed the environmental and health effects of glyphosate with acute toxicity levels. Also, the effect of glyphosate on aquatic life is discussed in detail and various detection methods such as fluorescence, chromatography, and colorimetric techniques from different food samples with a limit of detection values are revealed. Overall, this review will give an in-depth insight into the various toxicological aspects and detection of glyphosate from food matrix using various advanced analytical techniques.

A Novel and Sensitive Fluorescent Probe for Glyphosate Detection Based on Cu2+ Modulated Polydihydroxyphenylalanine Nanoparticles

A novel and sensitive fluorescent probe based on Cu²⁺-modulated polydihydroxyphenylalanine nanoparticles (PDOAs) has been developed for the detection of glyphosate pesticides. Compared to conventional instrumental analysis techniques, fluorometric methods have obtained good results in the field of agricultural residue detection. However, most of the fluorescent chemosensors reported still have some limitations, such as long response times, the high limit of detection, and complex synthetic procedures. In this paper, a novel and sensitive fluorescent probe based on Cu²⁺ modulated polydihydroxyphenylalanine nanoparticles (PDOAs) has been developed for the detection of glyphosate pesticides. The fluorescence of PDOAs can be effectively quenched by Cu²⁺ through the dynamic quenching process, which was confirmed by the time-resolved fluorescence lifetime analysis. In the presence of glyphosate, the fluorescence of the PDOAs-Cu²⁺ system can be effectively recovered due to the higher affinity of glyphosate for Cu²⁺, and thus released the individual PDOAs. Due to the admirable properties such as high selectivity to glyphosate pesticide, "turn on" fluorescence response, and ultralow detection limit of 1.8 nM, the proposed method has been successfully applied for the determination of glyphosate in environmental water samples.

Paper-based analytical device coupled with Bi-MOF: Electric field amplification and fluorescence sensing of glyphosate

Glyphosate, a potent herbicide wildly used in the world, involves potential hazards to human health by accumulating in the food chain. Due to its absence of chromophores and fluorophores, the rapid visual detection of glyphosate has always been difficult. Herein, a paper-based geometric field amplification device visualized by the amino-functionalized bismuth-based metal-organic framework (NH₂-Bi-MOF) was constructed for sensitive fluorescence determination of glyphosate. Fluorescence of the synthesized NH₂-Bi-MOF was immediately enhanced by interaction with glyphosate. The field amplification of glyphosate was implemented by coordinating the electric field and the electroosmotic flow, which was orchestrated by the geometric configuration of paper channel and the concentration of polyvinyl pyrrolidone, respectively. Under the optimal conditions, the developed method exhibited a linear range of 0.80-200 μmol L^-1 with about 12500-fold signal enhancement achieved by just 100 s electric field amplification. It was applied to soil and water with recoveries between 95.7% and 105.6%, holding great prospects in on-site analysis of hazardous anions for environment safety.

Surface Plasmon Resonance Imaging Sensor for Detection of Photolytically and Photocatalytically Degraded Glyphosate

Glyphosate is one of the most widely used pesticides, which, together with its primary metabolite aminomethylphosphonic acid, remains present in the environment. Many technologies have been developed to reduce glyphosate amounts in water. Among them, heterogeneous photocatalysis with titanium dioxide as a commonly used photocatalyst achieves high removal efficiency. Nevertheless, glyphosate is often converted to organic intermediates during its degradation. The detection of degraded glyphosate and emerging products is, therefore, an important element of research in terms of disposal methods. Attention is being paid to new sensors enabling the fast detection of glyphosate and its degradation products, which would allow the monitoring of its removal process in real time. The surface plasmon resonance imaging (SPRi) method is a promising technique for sensing emerging pollutants in water. The aim of this work was to design, create, and test an SPRi biosensor suitable for the detection of glyphosate during photolytic and photocatalytic experiments focused on its degradation. Cytochrome P450 and TiO₂ were selected as the detection molecules. We developed a sensor for the detection of the target molecules with a low molecular weight for monitoring the process of glyphosate degradation, which could be applied in a flow-through arrangement and thus detect changes taking place in real-time. We believe that SPRi sensing could be widely used in the study of xenobiotic removal from surface water or wastewater.

A ratio fluorescence sensor based on rhodamine B embedded metal-organic framework for glyphosate detection in agri-food products

Glyphosate, a broad-spectrum and high-efficiency herbicide, could accumulate in the human body through the consumption of agri-food products. Herein, a ratio fluorescence sensor based on rhodamine B-embedded amino-functionalized iron-based metal-organic framework (MOF, NH2-MIL-88(Fe)@RhB) bonded with Cu2+ was developed for rapid detection of glyphosate. The synthesized NH2-MIL-88(Fe) was a biconical prism and had a cavity for the embedding of RhB as a reference compound. In the presence of Cu2+, Lewis interactions with NH2-MIL-88(Fe)@RhB cause the fluorescence signal to be turned off. When glyphosate was added, the signal was turned on due to chelation with Cu2+ and hydrogen bonding interactions with NH2-MIL-88(Fe)@RhB. Under optimal conditions, the developed sensor exhibited a linear range of 0.60-45 μmol L-1 with a response time of less than 1 min. The sensor was applied in the analysis of agri-food products (tea, soybean, wheat, cucumber), with recoveries between 97.93% and 109.06%, indicating its promising application in agri-food safety.

Development and validation of an integrated microfluidic device with an in-line Surface Enhanced Raman Spectroscopy (SERS) detection of glyphosate in drinking water

Glyphosate, also known as N-(phosphonomethyl)glycine, is one of the most widely used herbicides in the world. However, the controversy surrounding the toxicity of glyphosate and its main breakdown product, aminomethylphosphonic acid (AMPA), remains a serious public concern. Therefore, there is a clear need to develop a rapid, sensitive and automated alternative method for the quantification of glyphosate and AMPA. In this context, surface enhanced Raman spectroscopy (SERS) coupled with a microfluidic system for the determination of glyphosate in tap water was developed, optimized and validated. The design of the microfluidic configuration for this application was built constructed to integrate the synthesis of the SERS substrate through to the detection of the analyte. To optimize the microfluidic setup, a design of experiments approach was used to maximize the SERS signal of glyphosate. Subsequently, an approach based on the European guideline document SANTE/11312/2021 was used to validate the method in the range of 78-480 μg/L using the normalized band intensities. The limit of detection and quantification obtained for glyphosate were 40 and 78 μg/L, respectively. Recoveries were in the range 76-117%, while repeatability and intra-day reproducibility were ≤17%. Finally, the method was also tested for the determination of AMPA in tap water matrix and for the simultaneous detection of AMPA and glyphosate.

Fluorescence determination of glyphosate based on a DNA-templated copper nanoparticle biosensor

A rapid and convenient fluorescence glyphosate (GLYP) biosensor was developed based on DNA-templated copper nanoparticles (DNA-CuNPs). In the absence of GLYP, the DNA-CuNPs were formed through the reduction of Cu2+ by vitamin C (Vc). The DNA-CuNPs emitted intense fluorescence at 615 nm when being excited at 340 nm. In the presence of GLYP, GLYP can strongly chelate with Cu2+ by the phosphate and carboxyl groups to decrease the amount of free Cu2+. Due to the lack of free Cu2+, DNA-CuNPs cannot be formed, which caused the fluorescence to decrease. The whole detection process of this proposed GLYP biosensor can be completed within 14 min. Titration experiments showed that this biosensor had a linear relationship for GLYP in the range 1 to 18 µM with a limit of detection (LOD) of 0.47 µM. This biosensor showed obvious selectivity among other pesticides, even between GLYP and organophosphorus pesticides. This biosensor performed well for GLYP detection in real samples with recoveries of 88.0-104.0%.

A reaction-based system for the colorimetric detection of glyphosate in real samples

Glyphosate is widely used herbicides and causes several diseases in humans. Therefore, the detection of glyphosate is curial and urgent. Studies on the detection of glyphosate in literature are often based on inhibition of the enzyme acetylcholinesterase. In this study, we developed two simple colorimetric sensors, BP-Cl and CP-Cl, by linking 3-chloro-4-methylpyridine with 4-(dimethylamino)cinnamaldehyde or 4-(dimethylamino)benzaldehyde in a one-step reaction. The colorimetric and optical sensing properties of these compounds were investigated by the naked-eye and UV-Vis spectrophotometer in ACN/HEPES buffer (5 mM pH 8.0, 1:1 v/v). The sensors displayed high sensitivity and selectivity for glyphosate by color changes, which ranged from colorless to yellow for BP-Cl and yellow to orange for CP-Cl. The detection limits of BP-Cl and CP-Cl by the naked-eye detection were found as 15 µM and 10 µM. On the other hand, the detection limits of BP-Cl and CP-Cl via UV-Vis measurements were calculated as 0.847 µM and 1.23 µM, respectively. Moreover, the sensors were able to monitor glyphosate in water samples using the naked-eye, UV-Vis spectroscopy, and filter paper strips.

A turn-on fluorescence sensor based on Cu2+ modulated DNA-templated silver nanoclusters for glyphosate detection and mechanism investigation

The abuse application of glyphosate can result in a potential hazard for environment and human, however its ultrasensitive detection remains challenging. Herein, a Cu2+ modulated DNA-templated silver nanoclusters (DNA-AgNCs) sensor was constructed to sensitively determine glyphosate based on the turn-on fluorescence strategy. The fluorescence quenching of DNA-AgNCs occurred with the existence of Cu2+. Upon the presence of glyphosate, the functional groups on the surface of glyphosate could chelate with Cu2+, following the fluorescence recovery of DNA-AgNCs. Through the stoichiometric methods, we unveil that Cu2+-trigged fluorescence quenching mode is a combination of static and dynamic quenching with the static mode being predominant. In DNA-AgNCs/Cu2+ system, the carboxylate, amine, and phosphonate groups of glyphosate interact with Cu2+ through chelation, in which the carboxylate oxygen, the phosphonate oxygen atoms, and the monoprotonated secondary amine nitrogen atom and Cu2+ form chelate rings. This fluorescence sensor showed a desired linearity of glyphosate analysis under the optimum conditions, ranging from 15 to 100 μg/L with a low detection down to 5 μg/L. Moreover, the proposed sensor was successfully utilized to measure glyphosate in real samples, indicating a promising application in pesticide residues detection.

Effects of low-concentration glyphosate and aminomethyl phosphonic acid on zebrafish embryo development

Glyphosate (GLY) is the most widely used broad-spectrum, non-selective herbicide in the world, whose main degradation product is aminomethyl phosphonic acid (AMPA). Because of long-term and large-scale use, residual GLY and AMPA in the environment pose great environmental and human health threats. The purpose of this study is to evaluate the effects and mechanism of residual low-concentrations of GLY and AMPA in the environment on the development of zebrafish embryos. Zebrafish embryos were exposed to 0, 1, 10, 100, and 700 ng·mL-1 GLY and AMPA for 72 h (from 2 to 74 h post-fertilization). With increasing exposure dose, heart rates of both embryos and larvae showed a rising trend and obvious arrhythmia appeared. Defects in cardiac development and function of zebrafish juveniles may be related to altered transcription levels of cardiac development genes (TBX5, NKX2.5, BMP4) and apoptosis genes (Bcl-2, Bax). In addition, pericardial edema and bone deformation of zebrafish embryos may be caused by inhibition of Na+/K+-ATPase and Ca2+-ATPase after exposure to GLY and AMPA. The present results demonstrated that at typical environmental residual concentrations of GLY and AMPA had similar developmental toxicity in zebrafish embryos.

Titanium dioxide-coated core-shell silica microspheres-based solid-phase extraction combined with sheathless capillary electrophoresis-mass spectrometry for analysis of glyphosate, glufosinate and their metabolites in baby foods

Because of their extremely low amount in complex samples, it is quite challenging to accurate determine residues of phosphorus-containing amino-acid-like herbicides (PAAHs) in food products. Here we develop novel core-shell mesoporous silica (CSMS) microspheres coated by titanium dioxide (CSMS@TiO2) for extraction and enrichment of PAAHs in baby foods. After the dispersive solid phase extraction (d-SPE), sheathless capillary electrophoresis-mass spectrometry (sheathless CE-MS) is utilized to achieve efficient separation and sensitive detection. The synthesized CSMS@TiO2 composites are characterized by various spectroscopic techniques, proving TiO2 is uniformly distributed onto the channel surface of CSMS. The composites have essential features that are favorable for adsorption of the analytes on the material for d-SPE, including uniform diameter (1.0 μm with a shell thickness of 133 nm), large perpendicular mesopores (15.6 nm), high surface area (101.1 m2/g) and large pore volume (0.4 cm3/g). Taking glyphosate, glufosinate and their main metabolites (aminomethylphosphonic acid and 3-methylphosphinicopropionic acid) as analytes, selective and efficient enrichment is achieved by CSMS@TiO2-based d-SPE through the affinity interaction between titanium dioxide and phosphate groups. Sensitive detection of target compounds is achieved with low limits of quantitation (LOQs) between 0.3-1.6 ng/mL and excellent inter/intra-day repeatability. The compounds in nine different commercial baby foods from local markets are analyzed using the proposed method. Good recoveries of 82.3-102.6% are achieved with low RSDs (n = 5) of 2.1-8.3%. Our study indicates that the proposed CSMS@TiO2-based d-SPE combined with sheathless CE-MS is an accurate and reliable approach for sensitive determination of trace-amount PAAHs and their metabolites in complex samples.

Challenges in the design of electrochemical sensor for glyphosate-based on new materials and biological recognition

Glyphosate (GLY) is the main ingredient in the weed killer Roundup and the most widely used pesticide in the world. Studies of the harmful effects of GLY on human health began to become more wide-ranging after 2015. GLY is listed by the International Agency for Research on Cancer (IARC) as a carcinogenic hazard to humans. Moreover, GLY has the property to complex with transition metals and are stable for long periods, being considered a high-risk element for different matrices, such as environmental (soil and water) and food (usually genetically modified crops). Since that, it was noticed an increment in the development of new analytical methods for its determination in different matrices like food, environmental and biological fluids. Noteworthy, the application of electrochemical techniques for downstream detection sparked interest due to the ability to minimize or eliminate the use of polluting chemicals, using simple and affordable equipment. This work aims to review the contribution of the electroanalytical methods for the determination of GLY in different food and environmental matrices. Parameters such as the electrochemical transduction techniques based on the electrical measurement signals, receptor materials for electrodes preparation, and the detection mechanisms are described in this review. The literature review shows that the electrochemical sensors are powerful detection system that can be improved by their design and by their portability to fulfil the needs of the GLY determination in laboratory benches, or even in situ analysis.

Complex study of glyphosate and metabolites influence on enzymatic activity and microorganisms association in soil enriched with Pseudomonas fluorescens and sewage sludge

This is the first large scale study of fate of the glyphosate (GLP) and its metabolites, (AMPA, N-acetyl glyphosate, N-acetyl AMPA, sarcosine and glycine) monitored by LC/MS/MS. The laboratory trials of behavior of GLP in two types of agricultural soil were performed. Soil (S), soil enriched with sewage sludge (S + SL), soil with Pseudomonas fluorescens (S + P) and soil enriched with sewage sludge and P. fluorescens (S + SL + P) was treated with Roundup 360 SL under controlled conditions. The presence of metabolites was depended on the soil type and enrichment with sludge or bacteria. The GLP and its soil metabolites caused increase of microorganisms association in comparison to control. We assumed that P. fluorescens and sewage sludge influence on time of GLP dissipation. Moreover, GLP degradation in presence of P. fluorescens and sewage sludge is carried out in different metabolic pathways compared to control (S + GLP). Furthermore, presence of particular GLP metabolites is related to different metabolic pathways and is connected with P. fluorescens and sewage sludge occurrence in soil. Additionally, P. fluorescens and sewage sludge stimulate enzymatic activity of soils.

Differential Pulse Polarographic Investigations on Glyphosate and Glufosinate Herbicides in Relation to Their Environmental Analysis

Differential pulse polarographic (DPP) investigations on the reaction of the amino function of glyphosate and glufosinate herbicides with carbon disulphide and copper(II) perchlorate forming copper(III) dithiocarbamate complexes were made in the presence of sodium perchlorate in acetonitrile at dropping mercury electrode (DME). The newly formed herbicide complexes exhibited analytically useful diffusion-controlled peaks at - 115 mV and - 110 mV versus saturated calomel electrode (SCE) with linear relationship between current and concentration. This observation formed the basis for the determination of glyphosate and glufosinate in the concentration ranges 0.34-8.45 μg mL-1 and 0.4-9.91 μg mL-1 respectively with correlation coefficient of 0.999. The method was applied to their determinations in soil, fortified food and spiked water samples to assess their environmental relevance. The recoveries of the herbicides were in the range 89.5%-98.3% with relative standard deviation (RSD) in the ranges 0.8%-1.8% thus showing good accuracy and precision of the method.