Encapsulation, protection, and release of hydrophilic active components: potential and limitations of colloidal delivery systems

Diffusion of Peptides and Small Molecules Encapsulated in Lipidic Cubic Phases by Band-Selective Excitation Short Transient 1H PGSE NMR

In model membrane systems, such as lipidic cubic phases (LCPs), 1H NMR spectra are dominated by resonances from water and lipid molecules. The measurement of translational diffusion of peptides/molecules encapsulated in LCPs using conventional 1H pulsed-gradient spin-echo (PGSE) NMR is, therefore, immensely difficult due to the dynamic range caused by the intense resonance(s) from the surrounding environment. The present study reports the use of a band-selective short transient PGSE sequence, avoiding the perturbation of both hydration water and lipids, for measuring the diffusion of molecules encapsulated within the lipid bilayer and the aqueous channels of LCPs.

Insights into dynamic properties of water in lipidic cubic phases by 2D nuclear Overhauser effect (NOE) NMR spectroscopy

Two-dimensional NOE (nuclear Overhauser effect) NMR spectroscopy was employed to investigate the dynamic properties of water within lyotropic bicontinuous lipidic cubic phases (LCPs) formed by monoolein (MO). Experiments observed categorically different effective residence times of water molecules: (i) in proximity to the glycerol moiety of MO, and (ii) adjacent to the hydrophobic chain towards the hydrocarbon tail of MO, as evidenced by the opposite signs of intermolecular NOE cross peaks between protons of water and those of MO in 2D 1H-1H NOESY spectra. Spectroscopic data delineating the different effective residence times of water molecules within both the gyroid (QIIG) and diamond (QIID) phase groups corresponding to hydration levels of 35 and 40 wt%, respectively, are presented. Additionally, an increase in effective residence time of water molecules in proximity to the glycerol moiety of MO in LCPs was observed upon storage at ambient temperature and in the presence of an additive lipid, cholesterol. Atom-specific NOE build-up curves for protons of water and those of MO are also given. The results presented herein provide new insight into the physicochemical properties and behaviour of water in LCPs, and demonstrate an additional avenue for experimental study of water-lipid interactions and hydration dynamics in model membranes and nanomaterials using 2D NOE NMR spectroscopy.

Bioaccessibility of chlorogenic acid and curcumin co-encapsulated in double emulsions with the inner interface stabilized by functionalized silica nanoparticles

The aim of this study was to evaluate the bioaccessibility of chlorogenic acid (CA) and curcumin co-encapsulated in Pickering double emulsions (DEs) with the inner interface stabilized by hydrophobically modified silica nanoparticles with myristic acid (SNPs-C14) or tocopherol succinate (SNPs-TS). Both SNPs-C14 and SNPs-TS showed contact angles > 90°. Pickering W1/O emulsions were formulated with 4 % of both types of SNPs. Pickering DEs showed higher creaming stability (5-7 %, day 42) and higher CA encapsulation efficiency (EE; 80 %) than control DE. The EE of curcumin was > 98 % in all the DEs. CA was steadily released from Pickering DEs during digestion, achieving bioaccessibility values of 58-60 %. Curcumin was released during the intestinal phase (∼80 % bioaccessibility in all DEs). Co-loaded DEs showed similar bioaccessibility for CA and curcumin than single-loaded. SNPs-C14 and SNPs-TS were suitable to stabilize the W1:O interface of DEs as co-delivery systems of bioactive compounds with health-promoting properties.

The effects of different types of polysaccharides on the structure and physical properties of W/O/W emulsions under varying pH conditions

BACKGROUND

Biopolymer based water-in-oil-in-water double (W1/O/W2) emulsion systems comprise a complex emulsion system that might be affected by several factors and the status at multiple phases. The present study investigated the physicochemical properties of W1/O/W2 double emulsions with inner W1 phase incorporated with various polysaccharides and the outer phase stabilized by whey protein isolate (WPI). Six different polysaccharides were selected as co-emulsifiers in the inner phase, and their effects on morphology, droplet size, zeta potential and rheology properties were evaluated. Furthermore, the impact of WPI/polysaccharide concentration and pH on the physicochemical properties and storage stability of the emulsions was compared.

RESULTS

Emulsions with an inner phase incorporated with xanthan gum and carrageenan exhibited better stability than others. Increasing the concentration of WPI enhanced the overall stability of the double emulsion, although it compromised the integrity of the internal W1/O interface. On the other hand, a 1.0% concentration of polysaccharide, specifically when carrageenan is used, slowed down droplet floating and coagulation. An acidic external aqueous phase (pH 4) led to larger and more uniform particle size distributions, as well as enhanced stability. The lower pH decreased the viscosity and delayed molecular exchange in the oil phase, thereby preserving the structure of the double emulsion.

CONCLUSION

These findings contribute to a better understanding of the factors influencing the stability and properties of W1/O/W2 double emulsions with addition of anionic polysaccharides in the inner water phase. © 2024 Society of Chemical Industry.

Prolonged Release Niosomes For Ocular Delivery of Loteprednol: Ocular Distribution Assessment on Dry Eye Disease Induced Rabbit Model

Loteprednol etabonate (LE) is a topical corticosteroid for the symptomatic management of ocular conditions, encompassing both allergic and infectious etiologies. Owing to the dynamic and static barriers of the eye, LE exhibits significantly low bioavailability, necessitating an increase in the frequency of drug administration. The objective of this study is to overcome the limitations by developing niosomal systems loaded with LE. Design of Experiments (DoE) approach was used for the development of optimal niosome formulation. The optimal formulation was characterized using DLS, FT-IR, and DSC analysis. In vitro and ex vivo release studies were performed to demonstrate drug release patterns. After that HET-CAM evaluation was conducted to determine safety profile. Then, in vivo studies were carried out to determine therapeutic activity of niosomes. Zeta potential (ZP), particle size, polydispersity index (PI), and encapsulation efficacy (EE) were -33.8 mV, 89.22 nm, 0.192, and 89.6%, respectively. Medicated niosomes had a broad distribution within rabbit eye tissues and was absorbed by the aqueous humor of the bovine eye for up to 6 h after treatment. Cumulative permeated drug in the bovine eye and rabbit eye were recorded 52.45% and 54.8%, respectively. No irritation or hemorrhagic situation was observed according to the results of HET-CAM study. Thus, novel LE-loaded niosomal formulations could be considered as a promising treatment option for the dry-eye-disease (DED) due to enhanced bioavailability and decreased side effects.

Quality Characteristics of Vegan Mayonnaise Produced Using Supercritical Carbon Dioxide-Processed Defatted Soybean Flour

Emulsifiers, like egg yolk (EY), are necessary for the formation of mayonnaise, which is an oil-in-water type of colloid. This study aimed to assess the potential of defatted soybean powder treated with supercritical carbon dioxide (DSF) to enhance the quality of plant-based mayonnaise as plant-based alternatives gain popularity. This study involved the production of DSF and the comparison of its quality attributes to those of mayonnaise made with varying amounts of control soy flour (CSF), DSF, and EY. It was found that mayonnaise made with an increased quantity of DSF showed better emulsion stability, viscosity, and a smaller, more uniform particle size when compared with CSF mayonnaise. Additionally, DSF mayonnaise was generally rated higher in sensory evaluation. The addition of approximately 2% DSF positively influenced the emulsion and sensory properties of the vegan mayonnaise, indicating that DSF is a promising plant-based alternative emulsifier for the replacement of animal ingredients.

Nanoencapsulation and delivery of bioactive ingredients using zein nanocarriers: approaches, characterization, applications, and perspectives

Zein has garnered widespread attention as a versatile material for nanosized delivery systems due to its unique self-assembly properties, amphiphilicity, and biocompatibility characteristics. This review provides an overview of current approaches, characterizations, applications, and perspectives of nanoencapsulation and delivery of bioactive ingredients within zein-based nanocarriers. Various nanoencapsulation strategies for bioactive ingredients using various types of zein-based nanocarrier structures, including nanoparticles, nanofibers, nanoemulsions, and nanogels, are discussed in detail. Factors affecting the stability of zein nanocarriers and characterization methods of bioactive-loaded zein nanocarrier structures are highlighted. Additionally, current applications of zein nanocarriers loaded with bioactive ingredients are summarized. This review will serve as a guide for the selection of appropriate nanoencapsulation techniques within zein nanocarriers and a comprehensive understanding of zein-based nanocarriers for specific applications in the food, pharmaceutical, cosmetic, and agricultural industries.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01489-6.

Characterization of chitosan/Persian gum nanoparticles for encapsulation of Nigella sativa extract as an antiviral agent against avian coronavirus

The aim of this study was to investigate the physicochemical characteristics of nanoparticles formed by the ionic gelation method between chitosan and water-soluble fraction of Persian gum (WPG) for encapsulation of Nigella sativa extract (NSE) as an antiviral agent. Our findings revealed that the particle size, polydispersity index (PDI), and zeta potential of the particles were in the range of 316.7-476.6 nm, 0.259-0.466, and 37.0-58.1 mV, respectively. The amounts of chitosan and WPG as the wall material and the NSE as the core had a considerable impact on the nanoparticle properties. The proper samples were detected at 1:1 chitosan:WPG mixing ratio (MR) and NSE concentration of 6.25 mg/mL. Fourier-transformed infrared (FTIR) spectroscopy proved the interactions between the two biopolymers. The effect of NSE on infectious bronchitis virus (IBV) known as avian coronavirus, was performed by the in-ovo method determining remarkable antiviral activity of NSE (25 mg/mL) and its enhancement through encapsulation in the nanoparticles. These nanoparticles containing NSE could have a promising capability for application in both poultry industry and human medicine as an antiviral product.

Combined immunochemotherapy achieving targeted co-delivery of chlorogenic acid and doxorubicin by sialic acid-modified liposomes enhances anti-cancer efficacy

Malignant melanoma is a high-grade aggressive skin tumor with an increasing incidence and mortality rates worldwide. Chemotherapeutic drugs such as doxorubicin have limited efficacy against melanoma due to their poor sensitivity, severe side effects, and drug resistance. Recent studies have shown that combinations of immunotherapy and chemotherapy have a synergistic effect in enhancing the anti-tumor effect. Here, we have developed liposomes co-loaded with chlorogenic acid (CA) and doxorubicin (DOX), modified with sialic acid-octadecylamine conjugate (SA-ODA), designated CA-DOX-SAL, that facilitate drug delivery by recognizing Siglec-1 receptor on TAMs. The physicochemical studies revealed the particle size and zeta potential of CA-DOX-SAL as 128.3 ± 0.8 nm and - 4.33 ± 0.50 mV, respectively. In vitro, CA-DOX-SAL demonstrated robust cellular uptake through SA receptor-mediated tumor-associated macrophages (TAM) targeting and exerted greater cytotoxicity on tumor cells. In vivo, targeted liposomes were found to accumulate in the tumor area, leading to an improvement in anti-tumor efficacy. In addition, CA-DOX-SAL effectively inhibited B16F10 melanoma tumor growth by stimulating the transition from tumor-promoting M2-type to anti-tumor M1-type and directly killing tumor cells. Overall, the co-delivery of immunomodulatory CA and chemotherapeutic DOX presents a promising therapeutic strategy to enhance clinical outcomes in the treatment of melanoma.

Pickering emulsions stabilized by cellulose nanocrystals extracted from hazelnut shells: Production and stability under different harsh conditions

Cellulose nanocrystals (CNCs) are biodegradable particles that have emerged as promising stabilizers for Pickering emulsions. This study investigated the effectiveness of CNCs in forming the Pickering emulsion from hazelnut shells (HS), an agricultural waste. Following the alkaline and bleaching treatments applied to HS, CNCs were obtained from treated hazelnut shell with acid hydrolysis. The physicochemical characteristics of CNCs were investigated using dynamic light scattering, XRD, FTIR, SEM, and TEM. A high crystalline (69.6 %) CNCs with a spherical shape were obtained. Contact angle and interfacial tension tests were conducted and showed that CNCs had amphiphilic nature. Pickering emulsions were investigated for their size, zeta potential, and stability under varying CNC concentrations. The results showed that when CNCs concentration increased from 0.5 to 2.0 wt%, droplet diameter decreased approximately 1.8 times and zeta potential increased. Creaming was not observed during 28 days of storage in a concentration of 2.0 wt% CNCs. The CNC stabilized emulsions exhibited high stability within a range of pH, temperatures, and salt concentrations. This study demonstrated that CNCs extracted from HS as environmentally friendly and cost-effective materials, could serve as a new stabilizer for Pickering emulsions especially for high temperature and low pH sensitive products such as mayonnaise.

Protection of navy-bean bioactive peptides within nanoliposomes: morphological, structural and biological changes

This study aimed to produce bioactive peptides from navy-bean protein with alcalase and pepsin enzymes (30-300 min) and to load them into a nanoliposome system to stabilize and improve their bioavailability. The degree of hydrolysis and biological activities (scavenging of DPPH, OH, and ABTS free radicals, reducing power, and chelating metal ions) of navy-bean protein were affected by the type of enzyme and hydrolysis time. The average particle size (83-116 nm), PDI (0.23-0.39), zeta potential (- 13 to - 20 mV), and encapsulation efficiency (80-91%) of nanoliposomes were influenced by the type and charge of peptides. The storage temperature and the type of loaded peptide greatly affected the physical stability of nanocarriers and maintaining EE during storage. The FTIR results suggested the effect of enzymatic hydrolysis on the secondary structures of protein and the effective placement of peptides inside polar-regions and the phospholipid monolayer membrane. SEM images showed relatively uniform-sized particles with irregular structures, which confirmed the results of DLS. The antioxidant activity of primary peptides affected the free radical scavenging of loaded nanoliposomes. Liposomes loaded with navy-bean peptides can be used as a health-giving formula in enriching all kinds of drinks, desserts, confectionery products, etc.

Lipidization as a tool toward peptide therapeutics

Peptides, as potential therapeutics continue to gain importance in the search for active substances for the treatment of numerous human diseases, some of which are, to this day, incurable. As potential therapeutic drugs, peptides have many favorable chemical and pharmacological properties, starting with their great diversity, through their high affinity for binding to all sort of natural receptors, and ending with the various pathways of their breakdown, which produces nothing but amino acids that are nontoxic to the body. Despite these and other advantages, however, they also have their pitfalls. One of these disadvantages is the very low stability of natural peptides. They have a short half-life and tend to be cleared from the organism very quickly. Their instability in the gastrointestinal tract, makes it impossible to administer peptidic drugs orally. To achieve the best pharmacologic effect, it is desirable to look for ways of modifying peptides that enable the use of these substances as pharmaceuticals. There are many ways to modify peptides. Herein we summarize the approaches that are currently in use, including lipidization, PEGylation, glycosylation and others, focusing on lipidization. We describe how individual types of lipidization are achieved and describe their advantages and drawbacks. Peptide modifications are performed with the goal of reaching a longer half-life, reducing immunogenicity and improving bioavailability. In the case of neuropeptides, lipidization aids their activity in the central nervous system after the peripheral administration. At the end of our review, we summarize all lipidized peptide-based drugs that are currently on the market.

Recent advances in oral delivery systems of resveratrol: foreseeing their use in functional foods

Herein, we review the current state-of-the-art on the use of micro- and nano-delivery systems, a possible solution to some of the drawbacks associated with the incorporation of resveratrol in foods. Specifically, we present an overview of a wide range of micro-nanostructures, namely, lipidic and polymeric, used for the delivery of resveratrol. Also, the gastrointestinal fate of resveratrol-loaded micro-nanostructures, as a critical parameter for their use as functional food, is explored in terms of stability, bioaccessibility, and bioavailability. Different micro-nanostructures are of interest for the development of functional foods given that they can provide different advantages and properties to these foods and even be tailor-made to address specific issues (e.g., controlled or targeted release). Therefore, we discuss a wide range of micro-nanostructures, namely, lipidic and polymeric, used to deliver resveratrol and aimed at the development of functional foods. It has been reported that the use of some production methodologies can be of greater interest than others, for example, emulsification, solvent displacement and electrohydrodynamic processing (EHDP) enable a greater increase in bioaccessibility. Additionally, the use of coatings facilitates further improvements in bioaccessibility, which is likely due to the increased gastric stability of the coated micro-nanostructures. Other properties, such as mucoadhesion, can also help improve bioaccessibility due to the increase in gut retention time. Additionally, cytotoxicity (e.g., biocompatibility, antioxidant, and anti-inflammatory) and possible sensorial impact of resveratrol-loaded micro- and nano-systems in foods are highlighted.

Nanoencapsulated Aquafeeds and Current Uses in Fisheries/Shrimps: A Review

Feeds for aquaculture animals are designed to provide them with the greatest amount of nourishment they need to carry out their regular physiological activities, such as maintaining a potent natural immune system and boosting growth and reproduction. However, the problems that severely hamper this sector's ability to contribute to achieving global food security include disease prevalence, chemical pollution, environmental deterioration, and inadequate feed usage. The regulated release of active aquafeed components; limited water solubility, bioaccessibility, and bioavailability, as well as their potent odour and flavour, limit their utilisation. They are unstable under high temperatures, acidic pH, oxygen, or light. Recent advancements in nano-feed for aquaculture (fish/shrimp) have attract enormous attention due to its excellent nutritional value, defeating susceptibility and perishability. Encapsulation is a multifunctional smart system that could bring benefits of personalized medicine; minimize costs and resources in the preclinical and clinical study in pharmacology. It guarantees the coating of the active ingredient as well as its controlled release and targeted distribution to a particular area of the digestive tract. For instance, using nanotechnology to provide more effective fish/shrimps feed for aquaculture species. The review enables a perspective points on safety and awareness in aquafeeds that have been made by the advancements of nanosystem. Therefore, potential of nano-delivery system in aquafeed industry for aquaculture act as concluding remark on future directions.

Self-assembly and structures of nanoscale double emulsion droplets through coarse-grained molecular dynamics simulations

Examples of self-assembled multiple emulsion droplets on the nanometre scale are very rare. In this work, we use coarse-grained (CG) molecular dynamics simulations to study the self-assembly of ternary mixtures consisting of water, n-heptane, and nonionic surfactant tetraethylene glycol monododecyl ether (C12E4). The water volume fractions studied are 1%, 3%, and 5%, respectively. Various nanoscale emulsions are obtained in a spontaneous process. When the water/surfactant volume ratio vm/s = 1.0/1.0, the obtained emulsion droplets are identified as oil-in-water-in-oil (O/W/O) double types, consisting of an oil core, an inner surfactant layer, a water layer, and an outer surfactant layer. The water molecules are distributed around the hydrophilic ends of the surfactants, while the hydrophobic ends of the surfactants wrap the oil cores and penetrate into the oil bulk. Hydrogen-bond interactions among water and the hydrophilic ends of the surfactants form cross-links that stabilize the double emulsion droplets. The sizes of all the oil cores inside the droplets are <6 nm in diameter, even with the highest water volume fraction of 5%. Both the concentration of free water molecules on the order of 10-6 mol/cm3 and the favourable energy change during emulsion formation indicate that the emulsion droplets are thermodynamically stable. In contrast, for vm/s = 1.0/5.5, no double emulsion but a simple water-in-oil emulsion was observed, with morphologies evolving from oblate to bicontinuous phases with an increase in the water volume fraction from 1% to 5%. Our coarse-grained molecular dynamics simulations provide valuable insight for the preparation of nanoscale double emulsions and the characterization of their structures.

Protein and Peptide-Based Nanotechnology for Enhancing Stability, Bioactivity, and Delivery of Anthocyanins

Anthocyanin, a unique natural polyphenol, is abundant in plants and widely utilized in biomedicine, cosmetics, and the food industry due to its excellent antioxidant, anticancer, antiaging, antimicrobial, and anti-inflammatory properties. However, the degradation of anthocyanin in an extreme environment, such as alkali pH, high temperatures, and metal ions, limits its physiochemical stabilities and bioavailabilities. Encapsulation and combining anthocyanin with biomaterials could efficiently stabilize anthocyanin for protection. Promisingly, natural or artificially designed proteins and peptides with favorable stabilities, excellent biocapacity, and wide sources are potential candidates to stabilize anthocyanin. This review focuses on recent progress, strategies, and perspectives on protein and peptide for anthocyanin functionalization and delivery, i.e., formulation technologies, physicochemical stability enhancement, cellular uptake, bioavailabilities, and biological activities development. Interestingly, due to the simplicity and diversity of peptide structure, the interaction mechanisms between peptide and anthocyanin could be illustrated. This work sheds light on the mechanism of protein/peptide-anthocyanin nanoparticle construction and expands on potential applications of anthocyanin in nutrition and biomedicine.

Polysaccharide/Carbon Quantum Dots Composite Film on Model Colloidal Particles-An Electro-Optical Study

Negatively charged carbon dots (Cdots) were successfully impregnated into chitosan/alginate film formed on model colloidal particles as a result of the attractive interactions with the chitosan molecules. The electrical properties of the produced films were studied by electrokinetic spectroscopy. In this study, the electric light scattering method was applied for first the time for the investigation of suspensions of carbon-based structures. The electro-optical behavior for the suspension of polymer-coated particles showed that the electric polarizability of the particle-covered layer from alginate was significantly higher compared to that of the layer from chitosan due to the higher charge density of alginate. The presence of a low concentration of Cdots in the film results in partial charge screening. It was confirmed that the polarizability of counterions with lower mobility along the adsorbed polyion chains was responsible for the registered electro-optical effect from the suspension of polymer-coated particles and that the participation of diffuse H+ counterions of Cdots in the creation of the electro-optical effect was negligible. The observed oscillation behavior in the evolution of the film thickness was interpreted through the participation of compensatory effects due to the additional adsorption/desorption of polyelectrolyte complexes from the film surface. The concentration of Cdots in the film was determined, and the loaded amount was ca. 6.6 µg/mL per layer.

Specific surface modification of liposomes for gut targeting of food bioactive agents

Liposomes have become a research hotspot in recent years as food delivery systems with attractive properties, including the bilayer structure assembled like the cell membrane, reducing the side-effect and improving environmental stability of cargos, controlling release, extending duration of functional ingredients, and high biodegradable and biocompatible abilities in the body. However, the conventional liposomes lack stability during storage and are weak in targeted absorption in the gastrointestinal track. At present, surface modification has been approved to be an effective platform to shield these barricades and help liposomes deliver the agents safely and effectively to the ideal site. In this review, the gastrointestinal stability of conventional liposomes, cargo release models from liposomes, and the biological fate of the core materials after release were emphasized. Then, the strategies in both physical and chemical perspectives to improve the stability and utilization of liposomes in the gastrointestinal tract, and the emerging approaches for improving gut targeting by specifically modified liposomes and the intestinal receptors relative to liposomes/cargos absorption were highlighted. Last but not the least, the safety, challenges, and opportunities for the improvement of liposomal bioavailability were also discussed to inspire new applications of liposomes as oral carriers.

Nano techniques: an updated review focused on anthocyanin stability

Anthocyanins (ACNs) are one of the subgroups of flavonoids and getting intensive attraction due to the nutritional values. However, their application of ACNs is limited due to their poor stability and bioavailability. Accordingly, nanoencapsulation has been developed to enhance its stability and bio-efficacy. This review focuses on the nano-technique applications of delivery systems that be used for ACNs stabilization, with an emphasis on physicochemical stability and health benefits. ACNs incorporated with delivery systems in forms of nano-particles and fibrils can achieve advanced functions, such as improved stability, enhanced bioavailability, and controlled release. Also, the toxicological evaluation of nano delivery systems is summarized. Additionally, this review summarizes the challenges and suggests the further perspectives for the further application of ACNs delivery systems in food and medical fields.

Polysaccharide-based nanoassemblies: From synthesis methodologies and industrial applications to future prospects

Polysaccharides, due to their remarkable features, have gained significant prominence in the sustainable production of nanoparticles (NPs). High market demand and minimal production cost, compared to the chemically synthesised NPs, demonstrate a drive towards polysaccharide-based nanoparticles (PSNPs) benign to environment. Various approaches are used for the synthesis of PSNPs including cross-linking, polyelectrolyte complexation, and self-assembly. PSNPs have the potential to replace a wide diversity of chemical-based agents within the food, health, medical and pharmacy sectors. Nevertheless, the considerable challenges associated with optimising the characteristics of PSNPs to meet specific targeting applications are of utmost importance. This review provides a detailed compilation of recent accomplishments in the synthesis of PSNPs, the fundamental principles and critical factors that govern their rational fabrication, as well as various characterisation techniques. Noteworthy, the multiple use of PSNPs in different disciplines such as biomedical, cosmetics agrochemicals, energy storage, water detoxification, and food-related realms, is accounted in detail. Insights into the toxicological impacts of the PSNPs and their possible risks to human health are addressed, and efforts made in terms of PSNPs development and optimising strategies that allow for enhanced delivery are highlighted. Finally, limitations, potential drawbacks, market diffusion, economic viability and future possibilities for PSNPs to achieve widespread commercial use are also discussed.

Nanocarriers with Multiple Cargo Load-A Comprehensive Preparation Guideline Using Orthogonal Strategies

Multifunctional nanocarriers enhance the treatment efficacy for modern therapeutics and have gained increasing importance in biomedical research. Codelivery of multiple bioactive molecules enables synergistic therapies. Coencapsulation of cargo molecules into one nanocarrier system is challenging due to different physicochemical properties of the cargo molecules. Additionally, coencapsulation of multiple molecules simultaneously shall proceed with high control and efficiency. Orthogonal approaches for the preparation of nanocarriers are essential to encapsulate sensitive bioactive molecules while preserving their bioactivity. Preparation of nanocarriers by physical processes (i.e., self-assembly or coacervation) and chemical reactions (i.e., click reactions, polymerizations, etc.) are considered as orthogonal methods to most cargo molecules. This review shall act as a guideline to allow the reader to select a suitable preparation protocol for a desired nanocarrier system. This article helps to select for combinations of cargo molecules (hydrophilic-hydrophobic, small-macro, organic-inorganic) with nanocarrier material and synthesis protocols. The focus of this article lies on the coencapsulation of multiple cargo molecules into biocompatible and biodegradable nanocarriers prepared by orthogonal strategies. With this toolbox, the selection of a preparation method for a known set of cargo molecules to prepare the desired biodegradable and loaded nanocarrier shall be provided.

Investigation of Bioactive Complexes of Chitosan and Green Coffee Bean or Artichoke Extracts

The formation of water-insoluble complexes between chitosan (ChS) and caffeoylquinic acid (CQ) derivatives present in artichoke (AE) and green coffee bean (GCBE) extracts was investigated by the equilibrium adsorption method. The UPLC/HPLC analysis revealed that the phenolic compounds accounted for 8.1% and 74.6% of AE and GCBE respectively, and CQ derivatives were the predominant compounds. According to the applied Langmuir adsorption model, anionic compounds present in natural extracts were adsorbed onto the active centers of ChS, i.e., primary amino groups. The driving forces of adsorption were electrostatic interactions between cationic groups of ChS and anionic compounds of natural extracts. Chromatographic analysis revealed that not only CQ derivatives, but also other phenolic compounds of natural extracts were attached to ChS. The release of adsorbed compounds into different media as well as the bioactive properties of complexes were also studied. With the immobilization of bioactives onto ChS, increased and prolonged ABTS^•+ radical scavenging activity and decreased antifungal activity against Fusarium graminearum and Botrytis cinerea were observed compared to those of ChS. The findings of the current study highlight that the adsorption approach could be used to successfully prepare water-insoluble complexes of ChS and components of natural extracts with prolonged antioxidant activity.

Designing healthier plant-based foods: Fortification, digestion, and bioavailability

Many consumers are incorporating more plant-based foods into their diets as a result of concerns about the environmental, ethical, and health impacts of animal sourced foods like meat, seafood, egg, and dairy products. Foods derived from animals negatively impact the environment by increasing greenhouse gas emissions, land use, water use, pollution, deforestation, and biodiversity loss. The livestock industry confines and slaughters billions of livestock animals each year. There are concerns about the negative impacts of some animal sourced foods, such as red meat and processed meat, on human health. The livestock industry is a major user of antibiotics, which is leading to a rise in the resistance of several pathogenic microorganisms to antibiotics. It is often assumed that a plant-based diet is healthier than one containing more animal sourced foods, but this is not necessarily the case. Eating more fresh fruits, vegetables, nuts, and whole grain cereals has been linked to improved health outcomes but it is unclear whether next-generation plant-based foods, such as meat, seafood, egg, and dairy analogs are healthier than the products they are designed to replace. Many of these new products are highly processed foods that contain high levels of saturated fat, sugar, starch, and salt, and low levels of micronutrients, nutraceuticals, and dietary fibers. Moreover, they are often rapidly digested in the gastrointestinal tract because processing disrupts plant tissues and releases the macronutrients. Consequently, it is important to formulate plant-based foods to reduce the levels of nutrients linked to adverse health effects and increase the levels linked to beneficial health effects. Moreover, it is important to design the food matrix so that the macronutrients are not digested and absorbed too quickly, but the micronutrients are highly bioavailable. In this article, we discuss how next-generation plant-based foods can be made healthier by controlling their nutrient profile, digestibility, and bioavailability.

Enhancing phycocyanin solubility via complexation with fucoidan or κ-carrageenan and improving phycocyanin color stability by encapsulation in alginate-pregelatinized corn starch composite gel beads

Phycocyanin (PC), as a pigment-protein complex, aggregates and precipitates in acidic environments. In this context, complex formation with anionic polysaccharides is a strategy to enhance protein solubility. Besides, acidic conditions negatively affect the inherent blue color of PC, which can be prevented by encapsulation. Thereupon, in the present study, two different biopolymer-based systems, namely complexes and hydrogel beads, were prepared to increase PC solubility and its color stability under acidic conditions, respectively. Fucoidan and κ-carrageenan (KC) were separately utilized to make a complex with PC. Calcium alginate-pregelatinized corn starch (PCS) composite gel beads were used to encapsulate PC. The prepared samples were added into model systems simulating acidic conditions and then characterized during storage at 4 and 25 °C under dark conditions. Appropriate colloidal stabilities were observed for fucoidan/PC and KC/PC model systems. The color of the samples remained stable at 4 °C. As well, the bead carriers (i.e. alginate-PCS) properly protected PC against low pH conditions over time at 4 °C. Thereupon, the blue color of the beads satisfactorily remained stable at this temperature. The findings showed that complexation with fucoidan or KC and encapsulation in mixed hydrogel beads are promising routes for improving PC solubility and its color stability, respectively.

Extraction, Modification and Biomedical Application of Agarose Hydrogels: A Review

Numerous compounds present in the ocean are contributing to the development of the biomedical field. Agarose, a polysaccharide derived from marine red algae, plays a vital role in biomedical applications because of its reversible temperature-sensitive gelling behavior, excellent mechanical properties, and high biological activity. Natural agarose hydrogel has a single structural composition that prevents it from adapting to complex biological environments. Therefore, agarose can be developed into different forms through physical, biological, and chemical modifications, enabling it to perform optimally in different environments. Agarose biomaterials are being increasingly used for isolation, purification, drug delivery, and tissue engineering, but most are still far from clinical approval. This review classifies and discusses the preparation, modification, and biomedical applications of agarose, focusing on its applications in isolation and purification, wound dressings, drug delivery, tissue engineering, and 3D printing. In addition, it attempts to address the opportunities and challenges associated with the future development of agarose-based biomaterials in the biomedical field. It should help to rationalize the selection of the most suitable functionalized agarose hydrogels for specific applications in the biomedical industry.

Effect of Curcumin Consumption on Inflammation and Oxidative Stress in Patients on Hemodialysis: A Literature Review

Advanced chronic kidney disease (CKD) stages lead to exacerbated inflammation and oxidative stress. Patients with CKD in stage 5 need renal hemodialysis (HD) to remove toxins and waste products. However, this renal replacement therapy is inefficient in controlling inflammation. Regular curcumin consumption has been shown to reduce inflammation and oxidative stress in subjects with chronic pathologies, suggesting that the daily intake of curcumin may alleviate these conditions in HD patients. This review analyzes the available scientific evidence regarding the effect of curcumin intake on oxidative stress and inflammation in HD patients, focusing on the mechanisms and consequences of HD and curcumin consumption. The inclusion of curcumin as a dietary therapeutic supplement in HD patients has shown to control the inflammation status. However, the optimal dose and oral vehicle for curcumin administration are yet to be determined. It is important to consider studies on curcumin bioaccessibility to design effective oral administration vehicles. This information will contribute to the achievement of future nutritional interventions that validate the efficacy of curcumin supplementation as part of diet therapy in HD.

Novel Colloidal Food Ingredients: Protein Complexes and Conjugates

Food proteins, polysaccharides, and polyphenols are natural ingredients with different functional attributes. For instance, many proteins are good emulsifiers and gelling agents, many polysaccharides are good thickening and stabilizing agents, and many polyphenols are good antioxidants and antimicrobials. These three kinds of ingredients can be combined into protein, polysaccharide, and/or polyphenol conjugates or complexes using covalent or noncovalent interactions to create novel multifunctional colloidal ingredients with new or improved properties. In this review, the formation, functionality, and potential applications of protein conjugates and complexes are discussed. In particular, the utilization of these colloidal ingredients to stabilize emulsions, control lipid digestion, encapsulate bioactive ingredients, modify textures, and form films is highlighted. Finally, future research needs in this area are briefly proposed. The rational design of protein complexes and conjugates may lead to the development of new functional ingredients that can be used to create more nutritious, sustainable, and healthy foods.

Biopolymer- and Lipid-Based Carriers for the Delivery of Plant-Based Ingredients

Natural ingredients are gaining increasing attention from manufacturers following consumers’ concerns about the excessive use of synthetic ingredients. However, the use of natural extracts or molecules to achieve desirable qualities throughout the shelf life of foodstuff and, upon consumption, in the relevant biological environment is severely limited by their poor performance, especially with respect to solubility, stability against environmental conditions during product manufacturing, storage, and bioavailability upon consumption. Nanoencapsulation can be seen as an attractive approach with which to overcome these challenges. Among the different nanoencapsulation systems, lipids and biopolymer-based nanocarriers have emerged as the most effective ones because of their intrinsic low toxicity following their formulation with biocompatible and biodegradable materials. The present review aims to provide a survey of the recent advances in nanoscale carriers, formulated with biopolymers or lipids, for the encapsulation of natural compounds and plant extracts.

Emulsion Gels Formed by Electrostatic Interaction of Gelatine and Modified Corn Starch via pH Adjustments: Potential Fat Replacers in Meat Products

The application of emulsion gels as animal fat replacers in meat products has been focused on due to their unique physicochemical properties. The electrostatic interaction between proteins and polysaccharides could influence emulsion gel stability. This study aimed to evaluate the physicochemical properties of emulsion gels using starch and gelatin as stabilizers, promoting electrostatic attraction via pH adjustment. Three systems were studied: emulsion gel A (EGA) and emulsion gel B (EGB), which have positive and negative net charges that promote electrostatic interaction, and emulsion gel C (EGC), whose charge equals the isoelectric point and does not promote electrostatic interactions. There was no significant difference in proximate analysis, syneresis and thermal stability between samples, while EGA and EGB had higher pH values than EGC. The lightness (L*) value was higher in EGA and EGB, while the yellowness (b*) value was the highest in EGC. The smaller particle size (p < 0.05) in EGA and EGB also resulted in higher gel strength, hardness and oxidative stability. Microscopic images showed that EGA and EGB had a more uniform matrix structure. X-ray diffraction demonstrated that all the emulsion gels crystallized in a β′ polymorph form. Differential scanning calorimetry (DSC) revealed a single characteristic peak was detected in both the melting and cooling curves for all the emulsion gels, which indicated that the fat exists in a single polymorphic state. All emulsion gels presented a high amount of unsaturated fatty acids and reduced saturated fat by up to 11%. Therefore, the emulsion gels (EGA and EGB) that favored the electrostatic protein-polysaccharide interactions are suitable to be used as fat replacers in meat products.

Effects of natural antioxidants and high-energy fabrication methods on physical properties and oxidative stability of flaxseed oil-in-water nanoemulsions

The effects of high-energy fabrication methods, namely high-pressure homogenization (HPH) and ultrasonication (US), on physicochemical properties of flaxseed oil-in-water nanoemulsions (FNEs) containing clove essential oil (CEO) and/or pomegranate peel extract (PPE) were studied during storage at 4 and 25 °C. Nanoemulsions with relatively similar average droplet size were prepared by HPH and/or US. An increase in droplet size was observed over time. Lower storage temperature and fabrication by US increased Ostwald ripening rate. Higher storage temperature and fabrication by US decreased the centrifugal stability of nanoemulsions. CEO revealed better antioxidant properties than PPE. The oxidative stability was evaluated by determining secondary oxidation products, and fatty acids profile. The absence of antioxidant, fabrication by US, and higher storage temperature decreased the oxidative stability of nanoemulsions. The results of this study might be helpful in controlling the oxidation of FNEs during long-term storage and in designing functional foods and beverages.

Fortification by design: A rational approach to designing vitamin D delivery systems for foods and beverages

Over the past few decades, vitamin D deficiency has been recognized as a serious global public health challenge. The World Health Organization has recommended fortification of foods with vitamin D, but this is often challenging because of its low water solubility, poor chemical stability, and low bioavailability. Studies have shown that these challenges can be overcome by encapsulating vitamin D within well-designed delivery systems containing nanoscale or microscale particles. The characteristics of these particles, such as their composition, size, structure, interfacial properties, and charge, can be controlled to attain desired functionality for specific applications. Recently, there has been great interest in the design, production, and application of vitamin-D loaded delivery systems. Many of the delivery systems reported in the literature are unsuitable for widespread application due to the complexity and high costs of the processing operations required to fabricate them, or because they are incompatible with food matrices. In this article, the concept of "fortification by design" is introduced, which involves a systematic approach to the design, production, and testing of colloidal delivery systems for the encapsulation and fortification of oil-soluble vitamins, using vitamin D as a model. Initially, the challenges associated with the incorporation of vitamin D into foods and beverages are reviewed. The fortification by design concept is then described, which involves several steps: (i) selection of appropriate vitamin D form; (ii) selection of appropriate food matrix; (iii) identification of appropriate delivery system; (iv) identification of appropriate production method; (vii) establishment of appropriate testing procedures; and (viii) system optimization.

Improving effect of oleic acid-mediated sodium caseinate-based encapsulation in an ultrasound field on the thermal stability and bioaccessibility of quercetin

The simultaneous improvement of quercetin (QUE) processing stability and bioavailability has always presented a technical challenge during food processing. This study constructed a water-soluble carrier consisting of oleic acid (OA) and sodium caseinate (NaCas) in an ultrasonic field and investigated the effect of its encapsulation on improving the thermal stability and bioaccessibility of QUE. The results showed that the OA and NaCas generated uniform, stable water-soluble particles with a poly dispersity index (PDI) below 0.3 and an absolute value of Zeta potential above 30 mV in optimized conditions (a protein concentration of 4 mg/mL, ultrasonic power of 300 W, and ultrasonic time of 5 min). OA-NaCas mass ratio of 1:40, 1:15, 1:8, and 1:4 was selected for QUE loading to compare its encapsulation effect at different mass ratios. Compared with the NaCas without OA, the QUE embedding rate reached 95 % at OA-NaCas mass ratios of 1:15 and 1:8. In addition, the transmission electron microscopy (TEM) images confirmed that QUE was embedded in OA-NaCas particles, forming regular, spherical OA-NaCas-QUE particles at mass ratios or 1:15 and 1:8. Next, when heated at 80 °C for 120 min, the OA-NaCas (OA:NaCas, 1:15, 1:8, and W/W) particles significantly improved the QUE retention rate. The simulated in vitro gastrointestinal digestion experiments showed that the QUE bioaccessibility increased from 25 % to more than 60 % when it was encapsulated in OA-NaCas (OA:NaCas, 1:15, 1:8, and W/W) particles. These results indicated that the OA-NaCas complex was suitable as a hydrophilic delivery carrier of fat-soluble polyphenols.

Lactic Acid Bacteria Simultaneously Encapsulate Diverse Bioactive Compounds from a Fruit Extract and Enhance Thermal Stability

This study develops an innovative cell-based carrier to simultaneously encapsulate multiple phytochemicals from a complex plant source. Muscadine grapes (MG) juice prepared from fresh fruit was used as a model juice. After incubation with inactivated bacterial cells, 66.97% of the total anthocyanins, and 72.67% of the total antioxidant compounds were encapsulated in the cells from MG juice. Confocal images illustrated a uniform localization of the encapsulated material in the cells. The spectral emission scans indicated the presence of a diverse class of phenolic compounds, which was characterized using high-performance liquid chromatography (HPLC). Using HPLC, diverse phytochemical compound classes were analyzed, including flavanols, phenolic acid, hydroxycinnamic acid, flavonols, and polymeric polyphenols. The analysis validated that the cell carrier could encapsulate a complex profile of bioactive compounds from fruit juice, and the encapsulated content and efficiencies varied by the chemical class and compound. In addition, after the heat treatment at 90 °C for 60 min, >87% total antioxidant capacity and 90% anthocyanin content were recovered from the encapsulated MG. In summary, these results highlight the significant potential of a selected bacterial strain for simultaneous encapsulation of diverse phenolic compounds from fruit juice and improving their process stability.

Ultrasound-assisted preparation of lactoferrin-EGCG conjugates and their application in forming and stabilizing algae oil emulsions

The aim of this study was to prepare lactoferrin-epigallocatechin-3-gallate (LF-EGCG) conjugates and to determine their ability to protect emulsified algal oil against aggregation and oxidation. LF-EGCG conjugates were formed using an ultrasound-assisted alkaline treatment. The ultrasonic treatment significantly improved the grafting efficiency of LF and EGCG and shortened the reaction time from 24 h to 40 min. Fourier transform infrared spectroscopy and circular dichroism spectroscopy analyses showed that the covalent/non-covalent complexes could be formed between LF and EGCG, with the CO and CN groups playing an important role. The formation of the conjugates reduced the α-helix content and increased the random coil content of the LF. Moreover, the antioxidant activity of LF was significantly enhanced after conjugation with EGCG. LF-EGCG conjugates as emulsifiers were better at inhibiting oil droplet aggregation and oxidation than LF alone. This study demonstrates that ultrasound-assisted formation of protein-polyphenol conjugates can enhance the functional properties of the proteins, thereby extending their application as functional ingredients in nutritionally fortified foods.

Effects of Polysaccharide Concentrations on the Formation and Physical Properties of Emulsion-Templated Oleogels

An emulsion template method was an effective way to prepare oleogels. However, there were few reports on how hydroxypropyl methylcellulose-pectin (HPMC-PC) mixtures affected the physicochemical properties of the obtained oleogels. In this study, the oleogels were prepared by an emulsion template method. The influences of HPMC and PC concentrations on the formation and physical properties of the emulsions and oleogels were investigated, by analyzing particle size distribution, microstructure, rheological test, oil loss, and crystallinity. The results of particle sizes and microstructure showed that a high concentration of HPMC and PC exhibited a better emulsification performance. The rheological tests indicated that a high concentration of HPMC and PC contributed to an increase in the mechanical strength of emulsions and oleogels. Moreover, an increase in an HPMC and PC concentration was beneficial to reduce the oil loss of oleogels. However, the change of HPMC and PC concentrations had no significant effect on the X-ray diffraction pattern of oleogels. This study could provide a theoretical basis for the construction of polysaccharide-based oleogels.

Fabrication and characterization of phycocyanin-alginate-pregelatinized corn starch composite gel beads: Effects of carriers on kinetic stability of phycocyanin

Composite gel beads using calcium alginate and different concentrations of pregelatinized corn starch (PCS) were produced to encapsulate phycocyanin (PC). Rheological properties of different sodium alginate/PCS/PC mixtures, structural and morphological properties of beads, and kinetic stability of encapsulated PC (upon heating at various time-temperature combinations) were then assessed. Rheological properties of the mixtures exhibited shear thinning behaviors. Aquagram revealed that the PC-containing beads had more water structure with weak‑hydrogen bonds. Morphological images represented less subsidence in the structures of composite gel beads, unlike PCS-free beads. Kinetic study showed that degradation rate constant values of PC encapsulated in composite gel beads (1.08-3.45 × 10^-4, 3.38-4.43 × 10^-4, and 5.57-15.32 × 10^-4 s^-1) were lower than those in PCS-free alginate gel beads (4.45 × 10^-4, 9.20 × 10^-4, and 18.04 × 10^-4 s^-1) at 40, 50, and 60 °C, respectively. This study suggests that the composite gel beads can improve PC stability.

Nanoencapsulation of Thyme Essential Oils: Formulation, Characterization, Storage Stability, and Biological Activity

This study aimed to improve the effectiveness of Thymus capitatus and Thymus algeriensis essential oils (EOs), as food preservatives, through their encapsulation in different delivery systems (DSs), namely nanoemulsions and biopolymeric nanoparticles. DSs’ preparation is tailored to enhance not only physical stability but also resulting Eos’ antioxidant and antibacterial activities through different fabrication methods (high-pressure homogenization emulsification or antisolvent precipitation) and using different emulsifiers and stabilizers. DSs are characterized in terms of droplet size distribution, ζ-potential, and stability over time, as well as antioxidant and antibacterial activities of encapsulated EOs. The antioxidant activity was studied by the FRAP assay; the antibacterial activity was evaluated by the well diffusion method. EOs of different compositions were tested, namely two EOs extracted from Thymus capitatus, harvested from Tunisia during different periods of the year (TC1 and TC2), and one EO extracted from Thymus algeriensis (TA). The composition of TC1 was significantly richer in carvacrol than TC2 and TA. The most stable formulation was the zein-based nanoparticles prepared with TC1 and stabilized with maltodextrins, which exhibit droplet size, polydispersity index, ζ-potential, and encapsulation efficiency of 74.7 nm, 0.14, 38.7 mV, and 99.66%, respectively. This formulation led also to an improvement in the resulting antioxidant (60.69 µg/mg vs. 57.67 µg/mg for non-encapsulated TC1) and antibacterial (inhibition diameters varying between 12 and 33 mm vs. a range between 12 and 28 mm for non-encapsulated TC1) activities of EO. This formulation offers a promising option for the effective use of natural antibacterial bioactive molecules in the food industry against pathogenic and spoilage bacteria.