Microwave-assisted activated carbon obtained from the sludge of tannery-treatment effluent plant for removal of leather dyes

Biochar-bacteria coupling system enhanced the bioremediation of phenol wastewater-based on life cycle assessment and environmental safety analysis

The efficient treatment of phenol wastewater is of great necessity since it induces serious pollution of water and soil ecosystems. Using biochar-immobilized functional microorganisms can innovatively and sustainably deal with the existing problem. In this study, we utilized response surface methodology (RSM) combined with life cycle assessment (LCA) to improve phenol biodegradation rate through a novel separated alkali-resistant and thermophilic strain Bacillus halotolerans ACY. Bioinformatic analysis revealed the genetic foundation of ACY to adapt to harsh environments. The characteristics of pig manure biochar (PMB) produced at varying pyrolysis temperatures (300-700 ℃) and adsorption experiment were investigated, immobilization of the phenol-degrading ACY on PMB600 under alkaline and high pollution load promoted phenol removal and extreme environment resistance, and the phenol removal rate reached 99.5 % in 7d in actual phenol wastewater, which increased compared with those achieved by PMB (50.6 %) and free bacteria (80.5 %) alone. Scanning Electron Microscope (SEM) and Fourier transform infrared spectrometry (FTIR) observations indicated the successful bacterial immobilization on PMB600. Reusability and economic cost study further demonstrated PMB600 as an excellent carrier for wastewater treatment. LC-MS, toxicology and carbon footprint analyses demonstrated that bacterial metabolism exerted synergy with adsorption for phenol removal, while biodegradation exerted the predominant impact on the immobilized bacterial system. This study provides an eco-friendly and effective approach to treat phenol wastewater.

The Effect of the Pyrolysis Temperature of a Leather-Textile Mixture from Post-Consumer Footwear on the Composition and Structure of Carbonised Materials

This paper presents an investigation into the use of pyrolysis to valorise solid waste in the form of post-consumer footwear uppers. A heterogenous leather and textile mixture is studied, produced by crushing some representative samples of post-consumer footwear uppers. The waste has a low ash content and a high net calorific value, which translates into the high gross calorific value of the material. In addition, it contains relatively little S and Cl, which is promising for its use in the process of pyrolysis. The effect of the pyrolysis temperature on the efficiency of carbonising leather and textile mixtures, their physico-chemical parameters, elemental composition, and structure, as well as the development of a specific surface, is investigated. The research results imply that as the pyrolysis temperature grows, the carbonisation efficiency declines. The produced materials consist primarily of C, O, N, and H, whose contents depend on the pyrolysis temperature. Moreover, all the carbonised materials display the presence of two G and D bands, which is typical for carbon materials. Based on the peak intensities of the bands, ID/IG coefficients are calculated to assess the organisation of the materials' structures. As the pyrolysis temperature rises, the structural organisation declines, contributing to an increased material porosity and, thus, a greater specific surface of the carbonised materials. This study contributes data on the thermal management and pyrolysis of leather and textile waste into useful carbonised materials. Investigating the applicability of carbonised materials is projected as the next stage of research work.

A systematic review of innovations in tannery solid waste treatment: A viable solution for the circular economy

Amidst growing global demand for leather goods, the efficient conversion of rawhide and skins into durable leather is crucial, yet approximately 80 % of these materials become solid and liquid waste during tannery operations. Improper management of tannery solid waste poses significant environmental risks, contaminating soil, groundwater, and surface water. This review explores thermochemical, biological, and phytoremediation methods for treating tannery solid waste, emphasizing their role in resource recovery and environmental sustainability. Thermochemical techniques like pyrolysis and gasification convert tannery solid waste into biochar, bio-oil, and syngas, which serve as soil amendments, renewable energy sources, or industrial feedstocks. Biological methods such as composting and anaerobic digestion decompose organic tannery solid waste components into nutrient-rich compost and biogas. Phytoremediation uses plants to remediate contaminants, including heavy metals, from tannery solid waste. These methods mitigate environmental pollution and support the leather industry's transition to sustainable practices, crucial for compliance with global regulations. Moreover, the review offers insights into current efforts and perspectives aimed at achieving a zero-waste policy, emphasizing the importance of a circular economy to alleviate the environmental burden associated with tannery operations and ensure their continued sustainability. Finally, a detailed discussion on the current challenges in terms of technology accessibility and economic feasibility was also discussed.

Critical methods of geopolymer feedstocks activation for suitable industrial applications

As health and safety issues emanating from human activities on terrestrial environment is becoming ever challenging, the production of Ordinary Portland Cement is identified as a key contributor. This technology threatens environmental quality by emitting significant quantity of carbon dioxide (CO2) that threatens Net Zero delivery. Consequently, the development of cement alternatives with substantial CO2 reduction/sequestration during production has become imperative. Geopolymers obtained from industrial residues are poised as promising alternatives in managing environmental systems but selection of appropriate method of activation has limited their wider industrial applications. This article discusses four key activation methods and their combinations used in four main feedstocks to advise on their energy requirements, product compressive strength and environmental/industrial applications. Reviewing and characterising 302 published literatures with focus on most relevant and recent advances in the field, this review found that hybrid techniques combining mechanical activation method produces geopolymers with the highest compressive strength and thus the best method. Geopolymer made by mechano-chemical activation method of slag achieved the highest compressive strength while geopolymer produced by microwave assisted activation of clay and ultrasonic activation of fly ash cum slag are most economical in curing energy demand. Hybrid activation is the current development in the field and integration of this method with mechanical activation is poised as the future geopolymer activation technology as it demonstrates greatest efficiency potential.

Salinity and pH effects on water-oil-calcite interfaces by using molecular dynamics

Smart water injection is a technology that allows changing the wettability of the oil rock by injecting water at different salinities, in a cheap and environmentally friendly way compared to other traditional methods. In this study, the individual effect of some typical salts on the wettability of the (104) surface of calcite toward non-polar and polar crude oil models was explored by molecular dynamics as a function of the salinity and pH. The results obtained show that the electrical double layer plays a principal role in the detachment of crude oil models. The divalent ion salts, i.e., CaCl2, CaSO4, MgCl2, and MgSO4, do not form the electrical double layer on calcite, but salts of NaCl and Na2SO4 form it. Moreover, the surface affinity of calcite to the non-polar crude oil is not affected by the salinity. However, the affinity of the calcite surface toward polar crude is affected by salinity and pH conditions. This research provides new insights into the action mechanisms that could help optimize its uses in enhanced oil recovery.

Recent Advances on Nitrogen-Doped Porous Carbons Towards Electrochemical Supercapacitor Applications

Due to ever-increasing global energy demands and dwindling resources, there is a growing need to develop materials that can fulfil the World's pressing energy requirements. Electrochemical energy storage devices have gained significant interest due to their exceptional storage properties, where the electrode material is a crucial determinant of device performance. Hence, it is essential to develop 3-D hierarchical materials at low cost with precisely controlled porosity and composition to achieve high energy storage capabilities. After presenting the brief updates on porous carbons (PCs), then this review will focus on the nitrogen (N) doped porous carbon materials (NPC) for electrochemical supercapacitors as the NPCs play a vital role in supercapacitor applications in the field of energy storage. Therefore, this review highlights recent advances in NPCs, including developments in the synthesis of NPCs that have created new methods for controlling their morphology, composition, and pore structure, which can significantly enhance their electrochemical performance. The investigated N-doped materials a wide range of specific surface areas, ranging from 181.5 to 3709 m2  g-1 , signifies a substantial increase in the available electrochemically active surface area, which is crucial for efficient energy storage. Moreover, these materials display notable specific capacitance values, ranging from 58.7 to 754.4 F g-1 , highlighting their remarkable capability to effectively store electrical energy. The outstanding electrochemical performance of these materials is attributed to the synergy between heteroatoms, particularly N, and the carbon framework in N-doped porous carbons. This synergy brings about several beneficial effects including, enhanced pseudo-capacitance, improved electrical conductivity, and increased electrochemically active surface area. As a result, these materials emerge as promising candidates for high-performance supercapacitor electrodes. The challenges and outlook in NPCs for supercapacitor applications are also presented. Overall, this review will provide valuable insights for researchers in electrochemical energy storage and offers a basis for fabricating highly effective and feasible supercapacitor electrodes.

Iron/nitrogen co-doped biochar derived from salvaged cyanobacterial for efficient peroxymonosulfate activation and ofloxacin degradation: Synergistic effect of Fe/N in non-radical path

A green, low-cost, high-performance Fe/N co-doped biochar material (Fe-N@C) was synthesized using salvaged cyanobacteria without other extra precursors for peroxymonosulfate (PMS) activation and ofloxacin (OFX) degradation. With the increased pyrolysis temperature, the graphitization degree, the specific surface area and the corresponding groups like OH, COO etc. for Fe-N@C tended to increase, resulting in a greater OFX adsorption. However, the total amount of Fe-NX and graphitic nitrogen groups in the Fe-N@C composites was firstly increased and then decreased, which reached the highest at 800 °C (Fe-N@C-800). All these changes of functional species ascribed to the strong interaction between Fe, N and C led to the highest defect degree of Fe-N@C-800, resulting the highest OFX removal efficiency of 95.0 %. OFX removal experiments indicated the adsorption process promoted the total OFX degradation for different functional groups on Fe-N@C composites separately dominated the process of OFX adsorption and PMS catalysis. Radical quenching and electron paramagnetic resonance (EPR) measurements proved free radical and non-free radical pathways participated in Fe-N@C/PMS system. The non-free radicals based on 1O2 and high-valent iron-oxo species played a more important role in OFX degradation, leading to the minimal effect of co-existing anions and the high universality for other antibiotic pollutants. Fe-NX was utilized as the main catalytic sites and graphitic nitrogen contributed more to the electron transfer for PMS activation, whose synergistic effect efficiently facilitated OFX degradation. Finally, the possible degradation route of OFX in the Fe-N@C-800/PMS system was proposed. All these results will provide the new insights into the intrinsic mechanism of Fe/N species in carbon-based materials for PMS activation.

Development of novel microsphere structured - calcium tungstate as efficacious electrocatalyst for the detection of antibiotic drug nitrofurantoin

In this report, synthetic and nitro groups containing antibiotic drug nitrofurantoin (NFT) were electrochemically quantified under amended conditions using novel constructed calcium tungstate microspheres modified on glassy carbon electrodes (CTMs/GCE). The calcium tungstate microspheres (CTMs) were synthesized by a facile sonochemical method and characterizations were done by various techniques, such as X-ray diffraction spectrometry (XRD), Fourier transform infrared spectroscopy (FTIR), Raman, field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Ahead of this, electrochemical investigations were performed using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), amperometry, and linear sweep voltammetry (LSV). The synthesis of CTMs as well-distributed microspheres allows more active metal sites regarding and remarkable electrocatalytic activity towards NFT detection with excellent sensitivity (0.724 μA μM-1 cm-2) and low detection limit (21 nmol L-1) with a wide linear range 10-140 μM. The practical feasibility of the developed CTMs/GC electrode was elucidated using distinct real sample river tap water and clinical sample (NFT capsule), and thus, the modified electrode manifested acceptable recovery results.

A systematic review on tannery sludge to energy route: Current practices, impacts, strategies, and future directions

The growing amount of tannery sludge (TS) generated from leather processing often undergoes uncontrolled landfilling, or open dumping, releasing a significant volume of harmful pollutants, including carcinogenic chromium (Cr) into the air, water, and soil. Therefore, the sustainable TS management through advanced valorization technologies becomes vital to align with the Sustainable Development Goals (SDGs) and mitigate the adverse environmental, health, and social impacts. Moreover, TS, as biomass, can be considered a renewable energy source for bioenergy generation, which could be a viable solution for meeting contemporary environmental standards and expediting transition towards a circular economy. However, TS valorization is sensitive and critical due to the potential risk of transforming Cr(III) to Cr(VI) during the valorization process. Therefore, there is an urgency to consider efficient and holistic TS valorization technologies in the design, implementation, and operations phases to avoid any environmental and health hazards. In pursuit of this goal, this systematic literature review (SLR) comprehensively and critically analyzes the existing TS valorization processes to develop sustainable energy recovery solutions from TS. This SLR contributes uniquely to the existing literature in different ways. Firstly, it provides a critical evaluation of the current TS valorization technologies identifying the available waste-to-energy recovery options. Secondly, the review encompasses extensive research from three reputed databases such as Scopus, Web of Science, and ScienceDirect, without temporal restrictions to offer a comprehensive understanding of current TS management practices and available valorization techniques. Moreover, the review categorized 124 published papers into distinct groups, revealing promising avenues for future research in this field. The findings indicated that most of the work concentrating on Chrome (Cr) recovery, pyrolysis, anaerobic co-digestion, and solidification while gasification and biodiesel or biofuel production from TS remained largely unexplored. Additionally, vital aspects such as process optimization, life cycle assessment of different valorization techniques, environmental, economy, energy, emergy, and exergy (5E) analysis, life cycle energy balance, and techno-economic analysis including exergoeconomic and exergoenvironmental are completely absent in the literature. Future studies need to concentrate on process optimization, exergy and energy analysis, and techno-economic assessment including exergoeconomic and exergoenvironmental analysis to understand the feasibility and environmental benefits of various TS valorization technologies and to develop industry-scale valorization plants for TS management in an economically and ecologically sustainable manner. Moreover, the review will serve as a comprehensive guide for scholars, authorities, and stakeholders to advance research in this field and formulate policies for the eco-friendly management of TS, paving the way towards clean energy solutions.

Impact of Incorporating Free Calcium and Magnesium on the Heat Stability of a Dairy- and Soy-Protein-Containing Model Emulsion

This study investigated the impact of calcium chloride (CaCl2) and magnesium chloride (MgCl2) at varying concentrations on a model milk formulation's physical and chemical properties after thermal treatment. The model milk was subjected to two-stage homogenization and pasteurization before being supplemented with different concentrations of CaCl2 or MgCl2. The findings revealed that elevating the concentration of either calcium or magnesium resulted in the milk emulsion having a higher viscosity and median particle size following heating. CaCl2 had a slightly stronger impact than MgCl2, particularly at higher concentrations. The milk samples also exhibited a reduction in the zeta potential as the ionic strength of the salt solution increased, with the CaCl2-fortified milk displaying a slightly lower negative surface charge than the MgCl2-fortified milk at the same dose. The model milk's viscosity was evaluated after adding various salt concentrations and a temperature ramp from 20 to 80 °C. Notably, the viscosity and particle size changes demonstrated a non-linear relationship with increasing mineral levels, where a significant increase was observed at or above 5.0 mM. An emulsion stability analysis also revealed that the de-stabilization pattern of the high salt concentration sample differed significantly from its low salt concentration counterparts. These findings could serve as a basis for the future development of fortified UHT milk with nutritionally beneficial calcium and magnesium in industrial applications.

Overview of environmental and economic viability of activated carbons derived from waste biomass for adsorptive water treatment applications

In adsorptive water treatment applications, the exploration of waste-derived activated carbon (AC) has gained substantial attention in scientific research. The use of waste materials as precursors for AC has gained attention due to its economic viability and potential to reduce the consumption of non-renewable resources. However, there is a lack of comprehensive literature regarding the costs and environmental impacts associated with the waste-based AC production and application. As sustainability practices gain importance, there has been an increase in research dedicated to estimating costs and conducting life cycle assessment (LCA) of AC production from waste sources. However, there is a need for thorough literature reviews that cover various methodologies and conclusions. The primary objective of this study is to provide a comprehensive overview and analysis of the economic and environmental factors related to the use of waste-derived AC in water treatment. LCA studies indicate that utilizing waste materials for AC production can lead to significant resource and energy savings compared to conventional methods relying on fossil resources. The cost of AC is influenced by factors such as precursor material cost, energy requirements during production (optimizable on an industrial scale), and properties of the resulting material. Additionally, the review emphasizes the significance of waste-based AC regeneration for sustainable viability. Evaluating the environmental and economic costs is crucial to support sustainability claims and avoid unsupported assertions. Overall, this study contributes to understanding the potential of waste-derived AC in water treatment and highlights the need for further research in this area.

Comparative studies on the aggregate formation of synthesized zwitterionic gemini and monomeric surfactants in the presence of the amphiphilic antipsychotic drug chlorpromazine hydrochloride in aqueous solution: an experimental and theoretical approach

The formation of aggregates, which are widely used in the field of biochemistry and the medical industry, was studied with different compositions of alkyl betaine gemini surfactant (C14Ab) in conjugation with chlorpromazine hydrochloride (CPZ). The results were compared with those of a single-chain zwitterionic surfactant (C12DmCB) of the same type with CPZ. Dynamic light scattering (DLS), confocal laser scanning microscopy (CLSM), and transmission electron microscopy (TEM) methods were used to distinguish the aggregates for the CPZ/C14Ab system in aqueous solutions above a certain mole fraction of the drug CPZ (αCPZ = 0.2). Time-resolved fluorescence decay measurements of acridine orange revealed relative polarity near the head group regions of mixed micelle (CPZ/C14Ab and CPZ/C12DmCB) systems. The hydrophilic environment around the head group regions of the CPZ/C14Ab system was different from that in the case of the CPZ/C12DmCB system. On the other hand, several theoretical models were employed (Clint, Rubingh, Motomura, and SPB) for mixed micellar systems to elucidate the different interaction parameters. Such a systematic study of a zwitterionic gemini amphiphile and its interaction with other amphiphiles and an amphiphilic drug molecule is rare in the literature.

Bimetallic Nanoalloy Catalysts for Green Energy Production: Advances in Synthesis Routes and Characterization Techniques

Bimetallic Nanoalloy catalysts have diverse uses in clean energy, sensing, catalysis, biomedicine, and energy storage, with some supported and unsupported catalysts. Conventional synthetic methods for producing bimetallic alloy nanoparticles often produce unalloyed and bulky particles that do not exhibit desired characteristics. Alloys, when prepared with advanced nanoscale methods, give higher surface area, activity, and selectivity than individual metals due to changes in their electronic properties and reduced size. This review demonstrates the synthesis methods and principles to produce and characterize highly dispersed, well-alloyed bimetallic nanoalloy particles in relatively simple, effective, and generalized approaches and the overall existence of conventional synthetic methods with modifications to prepare bimetallic alloy catalysts. The basic concepts and mechanistic understanding are represented with purposely selected examples. Herein, the enthralling properties with widespread applications of nanoalloy catalysts in heterogeneous catalysis are also presented, especially for Hydrogen Evolution Reaction (HER), Oxidation Reduction Reaction (ORR), Oxygen Evolution Reaction (OER), and alcohol oxidation with a particular focus on Pt and Pd-based bimetallic nanoalloys and their numerous fields of applications. The high entropy alloy is described as a complicated subject with an emphasis on laser-based green synthesis of nanoparticles and, in conclusion, the forecasts and contemporary challenges for the controlled synthesis of nanoalloys are addressed.

Preparation of carbonaceous materials from flotation-sludge of the poultry industry and its application in the methylene blue adsorption

In this work, different carbonaceous materials based on floated sludge from a poultry industry wastewater treatment plant (PI-WTP) were synthesized. These materials were characterized and investigated in methylene blue dye (MB) adsorption. The influences of the initial pH solution, adsorbent dosage, kinetics, equilibrium, and thermodynamics were evaluated in the adsorption experiments. A simulation of a real textile effluent was also carried out to evaluate the adsorbent. The results of the adsorbents' characterization demonstrated that adding ZnCl₂ + lime, followed by pyrolysis and acid leaching, significantly improved the material's properties, leading to abundant porosity and high surface area. The adsorption experiments indicated that the natural pH of the solution (8.0) and the AC-II dosage of 0.75 g L^-1 are optimal for MB removal. Elovich and Sips' models (with a maximum adsorption capacity of 221.02 mg g^-1 at 328 K) best fitted the experimental kinetic and equilibrium data, respectively. The adsorption process is spontaneous and endothermic according to thermodynamic parameters. The discoloration efficiency of the simulated effluent was 67.8%. In conclusion, the floated sludge, a residue produced on a large scale that needs to be disposed of correctly, can be converted into a value-added material (carbonaceous adsorbent) and applied to treat colored effluents.

Adsorption of the First-Line Covid Treatment Analgesic onto Activated Carbon from Residual Pods of Erythrina Speciosa

In this study, the residual pods of the forest species Erythrina speciosa were carbonized with ZnCl₂ to obtain porous activated carbon and investigated for the adsorptive removal of the drug paracetamol (PCM) from water. The PCM adsorption onto activated carbon is favored at acidic solution pH. The isothermal studies confirmed that increasing the temperature from 298 to 328 K decreased the adsorption capacity from 65 mg g^-1 to 50.4 mg g^-1 (C₀ = 175 mg L^-1). The Freundlich model showed a better fit of the equilibrium isotherms. Thermodynamic studies confirmed the exothermic nature (ΔH⁰ = -39.1066 kJ mol^-1). Kinetic data indicates that the external mass transfer occurs in the first minutes followed by the surface diffusion, considering that the linear driving force model described the experimental data. The application of the material in the treatment of a simulated effluent with natural conditions was promising, presenting a removal of 76.45%. Therefore, it can be concluded that the application of residual pods of the forest species Erythrina speciosa carbonized with ZnCl₂ is highly efficient in the removal of the drug paracetamol and also in mixtures containing other pharmaceutical substances.

Sphagnum perichaetiale Hampe biomass as a novel, green, and low-cost biosorbent in the adsorption of toxic crystal violet dye

In this study, the Sphagnum perichaetiale Hampe biomass was collected, characterized, and used as a biosorbent in the removal of crystal violet from water. The chemical and morphological results suggest that even after minimal experimental procedures, the biomass presented interesting properties regarding the adsorption of contaminants. Results of adsorption showed that the pH was not a relevant parameter and the best adsorbent dosage was 0.26 g L^-1. The kinetic results presented an initial fast step and the equilibrium was reached after 180 min. For the equilibrium data, the best adjustment occurred for the Sips model, reaching a maximum adsorption capacity of 271.05 mg g^-1 and the removal percentage obtained in the maximum adsorbent dosage was 97.11%. The thermodynamic studies indicated a reversible process and that the mass-transfer phenomena is governed by the physisorption mechanism. In addition to its great performance as a biosorbent, Sphagnum perichaetiale biomass also presents economic and sustainable benefits, as its production does not require costs with reagents or energy, usually used in chemical and physical activation. The reversible process indicated that the biosorbent could be reused, decreasing the costs related to the treatment of the effluents. Thus, Sphagnum perichaetiale biomass can be considered an efficient low-cost and eco-friendly biosorbent.

Zein nanoparticles for drug delivery: Preparation methods and biological applications

Zein, a vegetable protein extracted from corn (Zea mays L.), forms a gastro-resistant and mucoadhesive polymer that is cheap and easy to obtain and facilitates the encapsulation of bioactives with hydrophilic, hydrophobic, and amphiphilic properties. The methods used for synthesizing these nanoparticles include antisolvent precipitation/nanoprecipitation, pH-driven, electrospraying, and solvent emulsification-evaporation methods. Each method has its advantages in the preparation of nanocarriers, nevertheless, all of them enable the production of zein nanoparticles that are stable and resistant to environmental factors, with different biological activities required in the cosmetic, food, and pharmaceutical industries. Therefore, zein nanoparticles are promising nanocarriers that can encapsulate various bioactives with anti-inflammatory, antioxidant, antimicrobial, anticancer, and antidiabetic properties. This article reviews the principal methods for obtaining zein nanoparticles containing bioactives, the advantages and characteristics of each method, as well as the main biological applications of nanotechnology-based formulations.

Adsorptive Features of Magnetic Activated Carbons Prepared by a One-Step Process towards Brilliant Blue Dye

Water pollution by dyes has been a major environmental problem to be tackled, and magnetic adsorbents appear as promising alternatives to solve it. Herein, magnetic activated carbons were prepared by the single-step method from Sapelli wood sawdust, properly characterized, and applied as adsorbents for brilliant blue dye removal. In particular, two magnetic activated carbons, MAC1105 and MAC111, were prepared using the proportion of biomass KOH of 1:1 and varying the proportion of NiCl₂ of 0.5 and 1. The characterization results demonstrated that the different proportions of NiCl₂ mainly influenced the textural characteristics of the adsorbents. An increase in the surface area from 260.0 to 331.5 m² g^-1 and in the total pore volume from 0.075 to 0.095 cm³ g^-1 was observed with the weight ratio of NiCl₂. Both adsorbents exhibit ferromagnetic properties and the presence of nanostructured Ni particles. The different properties of the materials influenced the adsorption kinetics and equilibrium of brilliant blue dye. MAC111 showed faster kinetics, reaching the equilibrium in around 10 min, while for MAC1105, it took 60 min for the equilibrium to be reached. In addition, based on the Sips isotherm, the maximum adsorption capacity was 98.12 mg g^-1 for MAC111, while for MAC1105, it was 60.73 mg g^-1. Furthermore, MAC111 presented the potential to be reused in more adsorption cycles than MAC1105, and the use of the adsorbents in the treatment of a simulated effluent exhibited high effectiveness, with removal efficiencies of up to 90%.

An eco-friendly removal of Cd(II) utilizing banana pseudo-fibre and Moringa bark as indigenous green adsorbent and modelling of adsorption by artificial neural network

Heavy metal-contaminated water can be effectively treated using adsorbents made from abundantly available biomass. The present investigation was carried out to adsorb Cd(II) from synthetic solution by banana pseudo-stem (BP) and Moringa oleifera stem bark (MB). Adsorption efficiencies of both adsorbents were studied in the batch reactor by conducting experiments to determine the consequences of changes of pH, adsorbent dosages, initial Cd(II) concentrations, incubation time, and temperature. The process parameters were tuned to attain the highest possible removal percentage. The characterization of the adsorbents was performed by utilizing Fourier-transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), and energy-dispersive X-ray (EDX) for the fresh and metal-loaded adsorbents. Atomic absorption spectroscopy (AAS) was employed to calculate the amount of Cd(II) in an aqueous solution. The experimental data were entirely consistent with the pseudo-second-order model for BP and MB. The findings of the study illustrated the better adsorption efficiency of BP-derived adsorbent (≈ 99%) at optimum conditions over the MB (≈ 97%), and the corresponding adsorption capacities were 11.98 and 7.04 mg/g, respectively. The 4 (four) well-known isotherm models were attempted both in linear and non-linear forms. BP (R² =0.995) and MB (R² =0.994) were found to be best described by the Freundlich isotherm, which was selected based on the highest R² value. In thermodynamic studies, ΔH and ΔS were calculated for both the adsorbents. Cd(II) adsorption on BP and MB was endothermic, as evidenced by the positive ΔH. Finally, the prediction of the removal percentage was made by the artificial neural network (ANN) modelling. The present work developed regionally derived waste materials which are helpful for small-scale industrial units for their waste management in an economical and sustainable way.

Activation of Waste Materials with Carbon(IV) Oxide as an Effective Method of Obtaining Biochars of Attractive Sorption Properties towards Liquid and Gas Pollutants

Biochars that are the subjects of this report have been obtained from the residue of supercritical extraction of common nettle seeds with CO₂. The residue was subjected to direct activation with carbon(IV) oxide as an activator. The obtained biochars were found to have a specific surface area inthe range of 888-1024 m²/g and a basic surface. They were used for the adsorption of a liquid organic pollutant (methylene blue) and a gas inorganic pollutant (NO₂). As follows from the test results, the biochars were able to adsorb 150-239 mg of the dye. The Langmuir model was found to better describe the adsorption experimental data, while the kinetics of the process was better described by the pseudo-second-order model. From the thermodynamic analysis, it was inferred that the adsorption of methylene blue from a water solution was an endothermic and spontaneous reaction. It was established that elevated temperature of activation and the presence of air stream during adsorption had a positive impact on the adsorption of NO₂ by the biochars studied. The greatest sorption capacity of the biochars towards NO₂ was 59.1 mg/g.

Adsorption of Organic Compounds on Adsorbents Obtained with the Use of Microwave Heating

Activated carbons were obtained by physical and chemical activation of the residue of supercritical extraction of green tea leaves. All the adsorbents obtained were characterized by: elemental analysis, low-temperature nitrogen adsorption, and the contents of acidic and basic oxygen functional groups on the surface of activated carbons by the Boehm method. The activated carbons were micro- or micro-mesoporous with well-developed surface area ranging from 520 to 1085 m²/g and total pore volume from 0.62 to 0.64 cm³/g. The physical activation of the precursor led to the strongly basic character of the surface. Chemical activation with 50% solution of H₃PO₄ of the residue of supercritical extraction of green tea leaves promoted the generation of acidic functional groups. All adsorbents were used for methylene blue and methyl red adsorption from the liquid phase. The influence of the activation method, pH of the dye solution, contact time of adsorbent with adsorbate, the temperature of adsorption, and rate of sample agitation on the effectiveness of organic dyes removal was evaluated and optimized. In the process of methylene blue adsorption on adsorbents, an increase in the sorption capacity was observed with increasing pH of the adsorbate, while in the process of methyl red adsorption, the relation was quite the reverse. The adsorption data were analyzed assuming the Langmuir or Freundlich isotherm models. The Langmuir model better described the experimental results, and the maximum sorption capacity calculated for this model varied from 144.93 to 250.00 mg/g. The results of the kinetic analysis showed that the adsorption of organic dyes on activated carbon was following the pseudo-second-order model. The negative values of the Gibbs free energy indicate the spontaneous character of the process.

Applications of functionalized magnetic biochar in environmental remediation: A review

Magnetic biochar (MBC) is extensively applied on contaminants removal from environmental medium for achieving environmental-friendly remediation with reduction of secondary pollution owing to its easy recovery and separation. However, the summary of MBC synthesis methods is still lack of relevant information. Moreover, the adsorption performance for pollutants by MBC is limited, and thus it is imperative to adopt modification techniques to enhance the removal ability of MBC. Unfortunately, there are few reviews to present modification methods of MBC with applications for removing hazardous contaminants. Herein, we critically reviewed (i) MBC synthetic methods with corresponding advantages and limitations; (ii) adsorption mechanisms of MBC for heavy metals and organic pollutants; (iii) various modification methods for MBC such as functional groups grafting, nanoparticles loading and element doping; (iv) applications of modified MBC for hazardous contaminants adsorption with deep insight to relevant removal mechanisms; and (v) key influencing conditions like solution pH, temperature and interfering ions toward contaminants removal. Finally, some constructive suggestions were put forward for the practical applications of MBC in the near future. This review provided a comprehensive understanding of using functionalized MBC as effective adsorbent with low-cost and high-performance characteristics for contaminated environment remediation.

Tannery wastewater treatment: conventional and promising processes, an updated 20-year review

Mismanagement of various wastes especially waste water produced by tanning processes has caused serious environmental problems and ultimately impaired human health. Constant efforts have been making to alleviate the pollution of tannery wastewater (TWW), yet terminal treatment still takes dominance. In this review, research on TWW treatment from 2000 to 2021 was summarized, and main methods such as coagulation and flocculation, adsorption, biological treatment, membrane filtration, advanced oxidation process were briefly discussed. More detailed introduction was given to the method of electrochemical treatment since it has excellent performance such as environmental friendliness and high efficiency, hence attracting more and more research attention in recent years. In view of the harsh physi-chemical conditions of TWW, integrated or combined treatment methods are accordingly recommended with better performance and multi-function, however comprehensive studies on optimization of methods combination and cost-effectiveness are needed. The certain issues that the residue Cr in treatment sludge and high salinity in effluent still remain were put forward in this work and potential solutions were provided. Moreover, this review proposed the perspective that realizing multi-function, recycling, and intensification should be the developing direction for future TWW treatment. This review is expected to provide a general guide for researchers who aspire to ameliorate TWW pollution problems and understand various methods utilized in this field.

Graphical abstract

A systematic and critical review of application of molecular dynamics simulation in low salinity water injection

Low Salinity Water Injection (LSWI) has been a well-researched EOR method, with several experimental and theoretical scientific papers reported in the literature over the past few decades. Despite this, there is still an ongoing debate on dominant mechanisms behind this complex EOR process, and some issues remain elusive. Part of the complexity arises from the scale of investigation, which spans from sub-pore scale (atomic and electronic scale) to pore scale, core scale, and reservoir scale. Molecular Dynamics (MD) simulation has been used as a research tool in the past decade to investigate the nano-scale interactions among reservoir rock (e.g., calcite, silica), crude oil, and brine systems in presence of some impurities (e.g., clay minerals) and additives (e.g., nanoparticles). In this paper, fundamental concepts of MD simulation and common analyses driven by MD are briefly reviewed. Then, an overview of molecular models of the most common minerals encountered in petroleum reservoirs: quartz, calcite, and clay, with their most common types of potential function, is provided. Next, a critical review and in depth analysis of application of MD simulations in LSWI process in both sandstone and carbonate reservoirs in terms of sub-pore scale mechanisms, namely electrical double layer (EDL) expansion, multi-ion exchange (MIE), and cation hydration, is presented to scrutinize role of salinity, ionic composition, and rock surface chemistry from an atomic level. Some inconsistencies observed in the literature are also highlighted and the reasons behind them are explained. Finally, a future research guide is provided after critically discussing the challenges and potential of the MD in LSWI to shed more light on governing mechanisms behind LSWI by enhancing the reliability of MD outcomes in future researches. Such insights can be used for design of new MD researches with complementary experimental studies at core scale to capture the main mechanisms behind LSWI.

A critical evaluation of conventional kinetic and isotherm modeling for adsorptive removal of hexavalent chromium and methylene blue by natural rubber sludge-derived activated carbon and commercial activated carbon

The adsorptive removal of Cr(VI) and methylene blue (MB) was studied in a batch reactor using activated carbon (RAC), prepared from natural rubber waste, along with the commercial activated carbon (CAC). Maximum uptake of Cr(VI) and MB by the RAC was 21 and 30 mg g^-1, respectively, whereas the corresponding uptake by CAC was 145 and 224 mg g^-1. The kinetics of adsorption, however, was found to be faster in RAC than CAC. Both adsorbents were characterized by XRD, FT-IR, and FESEM-EDS. The predictability of various kinetic models, including the Weber-Morris model, was adversely affected by linearization. A multi-linear plot of adsorbed concentration versus square root of time failed to justify the multi-resistance hypothesis of mass transfer. Experimental kinetic data matched well with four surface reactions and an intraparticle diffusion model but showed substantial deviation from the numerical solution of another Fickian model incorporating mass balance and Langmuir isotherm.

Microwave assisted carbonization and activation of biochar for energy-environment nexus: A review

Conventional thermochemical conversion techniques for biofuel production from lignocellulosic biomass is often non-selective and energy inefficient. Microwave assisted pyrolysis (MAP) is cost and energy-efficient technology aimed for value-added bioproducts recovery from biomass with less environmental impacts. The present review emphasizes the performance of MAP in terms of product yield, characteristics and energy consumption and further it compares it with conventional pyrolysis. The significant role of biochar as catalyst in microwave pyrolysis for enhancing the product selectivity and quality, and the influence of microwave activation on product composition identified through sophisticated techniques has been highlighted. Besides, the application of MAP based biochar as soil conditioner and heavy metal immobilization has been illustrated. MAP accomplished at low temperature creates uniform thermal gradient than conventional mode, thereby producing engineered char with hotspots that could be used as catalysts for gasification, energy storage, etc. The stability, nutrient content, surface properties and adsorption capacity of biochar was enhanced by microwave activation, thus facilitating its use as soil conditioner. Many reviews until now on MAP mostly dealt with operational conditions and product yield with limited focus on comparative energy consumption with conventional mode, analytical techniques for product characterization and end application especially concerning agriculture. Thus, the present review adds on to the current state of art on microwave assisted pyrolysis covering all-round aspects of production followed by characterization and applications as soil amendment for increasing crop productivity in addition to the production of value-added chemicals, thus promoting process sustainability in energy and environment nexus.

Development and Characterization of Activated Carbon from Olive Pomace: Experimental Design, Kinetic and Equilibrium Studies in Nimesulide Adsorption

The lack of adequate treatment for the removal of pollutants from domestic, hospital and industrial effluents has caused great environmental concern. Therefore, there is a need to develop materials that have the capacity to treat these effluents. This work aims to develop and characterize an activated charcoal from olive pomace, which is an agro-industrial residue, for adsorption of Nimesulide in liquid effluent and to evaluate the adsorption kinetics and equilibrium using experimental design. The raw material was oven dried at 105 °C for 24 h, ground, chemically activated in a ratio of 1:0.8:0.2 of olive pomace, zinc chloride and calcium hydroxide and thermally activated by pyrolysis in a reactor of stainless steel at 550 °C for 30 min. The activated carbon was characterized by Fourier Transform Infrared (FTIR) spectroscopy, X-ray Diffractometry (XRD), Brunauer, Emmett and Teller (BET) method, Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), density and zero charge potential analysis. The surface area obtained was 650.9 m² g⁻¹. The kinetic and isothermal mathematical models that best described the adsorption were PSO and Freundlich and the highest adsorption capacity obtained was 353.27 mg g⁻¹. The results obtained showed the good performance of activated carbon produced from olive pomace as an adsorbent material and demonstrated great potential for removing emerging contaminants such as Nimesulide.

Cloud Point Extraction of Direct Blue 71 Dye using Triton X-100 as Nonionic Surfactant

A surfactant-mediated cloud point extraction (CPE) method using the non-ionic surfactant Triton X-100 (TX-100) has been developed to remove the dye Direct Blue 71 (DB71) from a waste water. Most of the dye molecules are solubilized in the coacervate phase so that the dilute phase remains free of the dye. The effects of surfactant concentration, temperature and salt concentration on the different dye concentrations were studied to determine the optimal conditions for removing DB71. The concentration of DB71 in the dilute phase was measured using UV-Vis spectrophotometer. It was found that the separation of phases was complete and the recovery of DB71 was very effective in the presence of NaCl as an electrolyte. The results showed that up to 25 ppm DB71, i.e. more than 95%, can be quantitatively removed by cloud point extraction procedures in a single extraction at optimal conditions. It was also observed that at a dye concentration of 1 ppm, 100% of the blue dye DB71 can be directly removed with a TX-100 concentration of 12% by weight. At higher dye concentrations of up to 30 ppm, 94.7%-100% dye can be removed. The TX-100 concentration was 12 wt%, the salt concentration (NaCl) 0.005 M and the temperature 75°C. It is concluded that the surfactant mediated cloud point extraction method for dye removal can be an alternative to current dye removal methods.

Adsorption of ibuprofen, ketoprofen, and paracetamol onto activated carbon prepared from effluent treatment plant sludge of the beverage industry

The presence of emerging contaminants such as pharmaceuticals in aquatic means presents as a serious threat, since their real consequences for the environment and human health are not well known. Therefore, this work consisted of preparing and characterize sludge-derived activated carbons (beverage sludge activated carbon - BSAC and acid-treated beverage sludge activated carbon - ABSAC) to investigate their use in the pharmaceuticals adsorption in aqueous media. The morphology study has demonstrated that ABSAC, unlike BSAC, exhibited an abundant porous structure, with smaller particles and bigger roughness. Adsorption results indicated that the ABSAC was more effective that BSAC, since it presented superior surface area (642 m² g^-1) and total pore volume (0.485 cm³ g^-1) values. Pseudo-second-order kinetic model was more suitable to predict experimental data. Sips model best described the equilibrium data, with maximum adsorption capacities of 145, 105, and 57 mg g^-1 for paracetamol, ibuprofen, and ketoprofen, respectively. Besides, the sludge-derived adsorbent was highly efficient in the treatment of a simulated drug effluent, removing 85.16% of the pharmaceutical compounds. Therefore, the material prepared in this work possesses intrinsic characteristics that make it a remarkable adsorbent to be applied in the treatment of pharmaceutical contaminants contained in industrial wastewater.

Preparation and Characterization of Activated Carbon Obtained from Water Treatment Plant Sludge for Removal of Cationic Dye from Wastewater

The proposal of this work was the preparation and characterization of activated carbons obtained from water treatment plant sludge (WTS) to apply as adsorbents in the removal of organic dye contaminants from wastewater. The activated carbons were produced with a combination of chemical activation and pyrolysis processes. The textural characteristics of both adsorbents presented a satisfactory superficial area and mesoporous structure. The presence of phenolic and carboxylic groups in the surface indicated a better adsorption of cationic adsorbates. When applied as adsorbents in the removal of methylene blue (MB) from wastewater, the maximum removal values obtained were up to 96%. The adsorption results showed that the adsorption was faster in the beginning and reached maximum around 30 min. The Elovich kinetic model and the Sips isotherm model presented the best fit to experimental data, which was checked by analysis of variance (ANOVA). The production of activated carbons from WTS is a sustainable and effective option in the removal of MB dye.

Single-step pyrolysis for producing magnetic activated carbon from tucumã (Astrocaryum aculeatum) seed and nickel(II) chloride and zinc(II) chloride. Application for removal of nicotinamide and propanolol

The present research describes the synthesis of new nanomagnetic activated carbon material with high magnetization, and high surface area prepared in a single pyrolysis step that is used for the carbonization, activation, and magnetization of the produced material. The pyrolysis step of tucumã seed was carried out in a conventional tubular oven at 600 °C under N₂-flow. It was prepared three magnetic carbons MT-1.5, MT-2.0, MT-2.5, that corresponds to the proportion of biomass: ZnCl₂ always 1:1 and varying the proportion of NiCl₂ of 1.5, 2.0, and 2.5, respectively. These magnetic nanocomposites were characterized by Vibrating Sample Magnetometer (VSM), X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, hydrophobic/hydrophilic balance, CHN/O elemental analysis, modified Boehm titration, N₂ adsorption-desorption isotherms; and pH_pzc. All the materials obtained presented Ni particles with an average crystallite size of less than 33 nm. The MT-2.0 was employed for the removal of nicotinamide and propranolol from aqueous solutions. Based on Liu isotherm, the Q_max was 199.3 and 335.4 mg g^-1 for nicotinamide and propranolol, respectively. MT-2.0 was used to treat simulated pharmaceutical industry effluents attaining removal of all organic compounds attaining up to 99.1 % of removal.

Adsorption of amoxicillin onto high surface area-activated carbons based on olive biomass: kinetic and equilibrium studies

This study presents the extraction of antibiotic amoxicillin (AMX) from aqueous solution employing activated carbons (AC) from olive biomass (OB). Two AC were prepared using ZnCl₂ (activator agent), and a conventional muffle furnace (ACF) or microwave oven (ACMW). The structure, morphology, and textural properties from both AC were analyzed by scanning electron microscope (SEM), pH of point-zero-charge (pH_PZC), infrared spectroscopy (FTIR), and N₂ adsorption/desorption isotherms. AC with mesoporous structures rich in oxygenated groups and high specific area (as high as 1742 m² g^-1) were helpful for the efficient and fast adsorption of AMX. The Avrami kinetic nonlinear equation showed the best fitting for the empirical data when related to the pseudo-1st and pseudo-2nd order. The isothermal experimental data followed the Liu nonlinear model, displaying at 25 °C the maximum sorption capacity of 237.02 and 166.96 mg g^-1 for the ACF and ACMW, respectively. An adsorption test with synthetic hospital effluent was carried out to evaluate the possibility of applying both adsorbents in wastewater purification. The purification efficiency was up to 94.4% and 91.96% for ACF and ACMW, respectively. Therefore, the AC obtained from OB (containing a mixture of seed, pulp, and olive peel) has a high potential for application in removing emerging contaminants from the wastewater.

Treatment of aqueous arsenic - A review of biochar modification methods

Arsenic (As) is an ever-present worldwide environmental contamination issue. The process of As sorption for treatment of contaminated waters is regarded as a promising treatment technology approach due to its simplicity and potential for high efficiency. Biochars are carbon-rich porous solids produced by heating of biomasses under low oxygen conditions. Biochars are considered to be environmentally friendly sorbents that can be used to treat various As-containing waters. However, unmodified biochar is generally a poor sorbent for As species due to static repulsion between the As oxyanions and the negatively charged biochar surface. The As sorption capacity of biochars can be substantially improved by treatments using various physical and chemical activation and modification methods. Thus, this review includes 63 research studies using physical and chemical approaches to enhance biochar physicochemical structures and As sorption efficiencies. The effectiveness of each method for altering the characteristics and sorption capacity of biochars is described. This review can help to focus the scope of future As biochar sorption studies and aid researchers in optimization of biochar-based sorbents for As treatment.

Removal of pharmaceutical compounds from aqueous solution by novel activated carbon synthesized from lovegrass (Poaceae)

In this work, lovegrass (Cpa), an abundant grass of the Poaceae family, was employed as feedstock for the production of activated carbon in a conventional furnace using ZnCl₂ as a chemical activator. The prepared material (Cpa-AC) was characterized by pH of the point of zero charges (pH_pzc), Boehm's titration method, CHN/O elemental analysis, ATR-FTIR, N₂ adsorption/desorption curves, and SEM. This carbon material was used for adsorption of acetylsalicylic acid (ASA) and sodium diclofenac (DFC). FTIR analysis identified the presence of O-H, N-H, O-C=O), C-O, and aromatic ring bulk and surface of (Cpa-AC) adsorbent. The quantification of the surface functional groups showed the presence of a large amount of acidic functional groups on the surface of the carbon material. The isotherms of adsorption and desorption of N₂ confirm that the Cpa-AC adsorbent is mesopore material with a large surface area of 1040 m² g^-1. SEM results showed that the surface of Cpa-AC is rugous. The kinetic study indicates that the system followed the pseudo-second-order model (pH 4.0). The equilibrium time was achieved at 45 (ASA) and 60 min (DCF). The Liu isotherm model best fitted the experimental data. The maxima sorption capacities (Q_max) for ASA and DFC at 25 °C were 221.7 mg g^-1 and 312.4 mg g^-1, respectively. The primary mechanism of ASA and DFC adsorption was justified considering electrostatic interactions and π-π interactions between the Cpa-AC and the adsorbate from the solution.

Removal of amoxicillin from simulated hospital effluents by adsorption using activated carbons prepared from capsules of cashew of Para

High-surface-area activated carbons were prepared from an agroindustrial residue, Bertholletia excelsa capsules known as capsules of Para cashew (CCP), that were utilized for removing amoxicillin from aqueous effluents. The activated carbons were prepared with the proportion of CCP:ZnCl₂ 1:1, and this mixture was pyrolyzed at 600 (CCP-600) and 700 °C (CCP700). The CCP.600 and CCP.700 were characterized by CHN/O elemental analysis, the hydrophobic/hydrophilic ratio, FTIR, TGA, Boehm titration, total pore volume, and surface area. These analyses show that the adsorbents have different polar groups, which confers a hydrophilic surface. The adsorbents presented surface area and total pore volume of 1457 m² g^-1 and 0.275 cm³ g^-1 (CCP.600) and 1419 m² g^-1 and 0.285 cm³ g^-1 (CCP.700). The chemical and physical properties of the adsorbents were very close, indicating that the pyrolysis temperature of 600 and 700 °C does not bring relevant differences in the physical and chemical properties of these adsorbents. The adsorption data of kinetics and equilibrium were successfully adjusted to Avrami fractional-order and Liu isotherm model. The use of the adsorbents for treatment of simulated hospital effluents, containing different organic and inorganic compounds, showed excellent removals (up to 98.04% for CCP.600 and 98.60% CCP.700). Graphical abstract.