Ultrasensitive detection of glyphosate through effective photoelectron transfer between CdTe and chitosan derived carbon dot

Safeguarding food safety: Nanomaterials-based fluorescent sensors for pesticide tracing

Pesticide residue contamination has emerged as a critical concern due to its potential negative effects on both public health and the natural environment. Consequently, the detection of pesticide residue is of utmost importance. Nanomaterial-based fluorescence sensors, including metal nanoparticles (MNPs), metal nanoclusters (MNCs), carbon dots (CDs), and quantum dots (QDs), are particularly effective for detecting pesticide residues. Herein, we provide a comprehensive review of the recent advances (2018-2024) in fluorescence-based sensors utilizing MNPs, MNCs, CDs and QDs and their composites for the purpose of detecting various pesticides including organophosphates, carbamates, organochlorines, and pyrethroids in food. This review delves into the evolution of nanomaterials, their corresponding fluorescence-based sensing mechanisms, including Förster resonance energy transfer (FRET), photoinduced electron transfer (PET), inner filter effect (IFE), aggregation induced emission (AIE), and the detection principle, focusing on aspects of sensitivity and specificity. We also address the challenges and future perspectives of nanomaterials-based fluorescence sensors.

Directed Cell Growth of C2C12 Cells on ECM Free Bioprinted Nano/Micro Scaffolds

Skeletal muscle cell growth impairment can result in severe health issues, such as reduced mobility, metabolic problems, and cardiovascular issues, which can significantly impact an individual's overall health and lifestyle. To address this issue, it is essential to adopt a multi-faceted approach. Conventional 2D cell culture methods fail to replicate the critical features of in vivo micro/nanoarchitecture, which is crucial for the growth of skeletal muscle cells. In this study, the directed growth of mouse skeletal myoblasts (C2C12) cells on ECM-free biocompatible scaffolds is demonstrated and fabricated using two-photon lithography (TPL). These scaffolds are 2D and 3D and have nano/micro-features derived from chitosan-based carbon quantum dots (Ch-CQDs). Ch-CQDs act as two-photon initiators for TPL and also provide the scaffolds with adequate mechanical strength and specific binding sites. These scaffolds are biocompatible and can support cellular adhesion and growth without the need for ECM coating. The nano/micro scaffolds mimic the in vivo cellular microenvironment, enabling directed cell growth on ECM-free surfaces. The fabricated scaffolds have tunable mechanical strength ranging from 0.09 to 0.75 GPa. By using Ch-CQDs, scaffolds are created that promote cell growth and alignment, which is crucial for skeletal muscle cell growth.

Fluorescence enhancing and quenching signal based on new approach for selective detection of multiple organochlorine pesticides using blue emissive-carbon dot

Measuring the concentration of organochlorine pesticides (OCPs) in agriculture has engaged significant awareness for healthcare investigation since OCPs are harmful to many physiological processes. Excessive usage of these compounds can result in major contamination of the environment and food supply chains. As a result, more accurate and rapid ways to detect pesticide residues in food are required. In this work, we have portrayed the surface-engineered fluorescent blue emissive-carbon dot (B-CD) with a high quantum yield (49.3 %) via the hydrothermal method for fluorescent sensing of OCPs on real samples. The amine group functionalities of carbon dots have supported the direct coordination with -Cl and -OH groups of HEP, ENS, CDF and 2,4-DPAC for the sensitive detection of OCPs, by switching in the fluorescent intensity of B-CD. The functional group of OCPs exhibits a variety of binding interactions with B-CD to contribute a complex formation, which leads to static quenching via an insubstantial restricted electron transfer process. The synthesized carbon dots exhibit individuality in binding nature towards different OCPs. Fluorescence studies help to distinguish the target OCPs and their low detection limits (LODs) were 0.002, 0.099, 0.16 and 0.082 μM for Heptachlor (HEP - turn "on"), Endosulfan (ENS), Chlordimeform (CDF) and 2,4-dichlorophenoxyacetic acid (2,4-DPAC - turn "off") OCPs respectively. The real water samples and agriculture food samples were effectively investigated and the OCP toxicity was noted. Thus, the design of the fluorescence sensor is established as an easy and proficient sensing method for detecting OCPs.

Detection of glyphosate residues in agricultural products using liquid-crystal-based sensor exploiting competitive binding of glyphosate and Cu2+ at the aqueous/LC interface and capillary tube test strip

Glyphosate is a widely used herbicide that poses both health and environmental risks. In this study, we propose a liquid crystal (LC)-based assay for glyphosate detection that exploits the unique properties of LC materials. The nematic LC 4-cyano-4'-pentylbiphenyl (5CB) was employed as the sensing material and a self-assembled monolayer of octadecyltrichlorosilane (OTS) was used to modify glass substrates. The assay involved strong competition for coordination with Cu2+ for glyphosate, resulting in changes in the LC texture. By monitoring and analyzing the optical images of the LC film using polarizing microscopy, we detected and quantified the glyphosate concentrations. The proposed assay demonstrated high sensitivity and selectivity toward glyphosate in the detection range of 1-300 nM with a limit of detection of 0.26 nM. Moreover, the assay successfully applied to analyze glyphosate in spiked samples, including tap water, soil, and cabbage, and satisfactory recovery rates were achieved. Based on this detection principle, capillary tube test strips were developed for on-site applications. The detection thresholds of the test strips were controlled by varying the Cu2+ concentration. The developed LC-based assay is a rapid and reliable glyphosate detection method with potential applications in environmental monitoring and food safety.

Glyphosate-Exonuclease Interactions: Reduced Enzymatic Activity as a Route to Glyphosate Biosensing

N-phosphonomethyle-glycine (glyphosate) is the most widely used pesticide worldwide due to its effectiveness in killing weeds at a moderate cost, bringing significant economic benefits. However, owing to its massive use, glyphosate and its residues contaminate surface waters. On site, fast monitoring of contamination is therefore urgently needed to alert local authorities and raise population awareness. Here the hindrance of the activity of two enzymes, the exonuclease I (Exo I) and the T5 exonuclease (T5 Exo) by glyphosate, is reported. These two enzymes digest oligonucleotides into shorter sequences, down to single nucleotides. The presence of glyphosate in the reaction medium hampers the activity of both enzymes, slowing down enzymatic digestion. It is shown by fluorescence spectroscopy that the inhibition of ExoI enzymatic activity is specific to glyphosate, paving the way for the development of a biosensor to detect this pollutant in drinking water at suitable detection limits, i.e., 0.6 nm.

Carbon Quantum Dots Based on Marine Polysaccharides: Types, Synthesis, and Applications

The marine environment offers a vast array of resources, including plants, animals, and microorganisms, that can be utilized to extract polysaccharides such as alginate, carrageenan, chitin, chitosan, agarose, ulvan, porphyra, and many more. These polysaccharides found in marine environments can serve as carbon-rich precursors for synthesizing carbon quantum dots (CQDs). Marine polysaccharides have a distinct advantage over other CQD precursors because they contain multiple heteroatoms, including nitrogen (N), sulfur (S), and oxygen (O). The surface of CQDs can be naturally doped, reducing the need for excessive use of chemical reagents and promoting green methods. The present review highlights the processing methods used to synthesize CQDs from marine polysaccharide precursors. These can be classified according to their biological origin as being derived from algae, crustaceans, or fish. CQDs can be synthesized to exhibit exceptional optical properties, including high fluorescence emission, absorbance, quenching, and quantum yield. CQDs' structural, morphological, and optical properties can be adjusted by utilizing multi-heteroatom precursors. Moreover, owing to their biocompatibility and low toxicity, CQDs obtained from marine polysaccharides have potential applications in various fields, including biomedicine (e.g., drug delivery, bioimaging, and biosensing), photocatalysis, water quality monitoring, and the food industry. Using marine polysaccharides to produce carbon quantum dots (CQDs) enables the transformation of renewable sources into a cutting-edge technological product. This review can provide fundamental insights for the development of novel nanomaterials derived from natural marine sources.

Detection of organic pollutants, food additives and antibiotics using sustainable carbon dots

The ecosystem across the globe has been adversely affected due to the adoption of unsustainable growth strategies. Overuse of organic pollutants such as dyes, pesticides, disinfectants, food additives and antibiotics, along with their release into the environment without proper treatment has severely affected the food chain and water bodies, hence ultimately the human race. As the organic contaminants, being non-biodegradable, persist in the environment for a long duration, a sustainable method for the detection of these harmful organic pollutants is essential. For food safety and restoration of ecological balance, simple, non-toxic, cost-effective and environmentally friendly green precursor derived carbon dots (CDs) are favorable as compared to inorganic nanoparticles (CdTe, CdS etc.) and chemically derived CDs. This review covers the summary of the studies devoted to the optical detection of organic pollutants, food additives and antibiotics through green precursor derived CDs, reported during the last few years. The upcoming studies of optical sensing systems with sustainable CDs provide powerful insight towards pollutant detection, as well as act as a future monitoring tool.

A smartphone-assisted ultrasensitive detection of acrylamide in thermally processed snacks using CQD@Au NP integrated FRET sensor

Selective, sensitive, and accurate detection of acrylamide (AA) in thermally processed food is a great challenge for food safety. This paper describes a "turn-on" fluorescence strategy to detect AA in real samples. Herein, the fluorescence intensity of glutathione-modified carbon quantum dots (GSHCQDs) was quenched initially upon the addition of gold nanoparticles (Au NPs) via fluorescence resonance electron transfer (FRET) to form a quenched GSHCQD-Au nanoprobe. When AA was introduced to the quenched GSHCQD-Au nanoprobe, the strong thiol-ene Michael addition (M-A) reaction among the -SH group of GSHCQD and AA occurred which releases GSHCQD to the medium and FL intensity at 520 nm is regained. The GSHCQD-Au nanoprobe can detect the AA in a normal aqueous solution (pH 7) selectively over a short response time of 5 min. Under the optimized conditions, the detection limit of AA was obtained to be 0.12 pM, over a wide linear range of 0-200 nM. Especially, this FRET-based sensing method was utilized successfully for the sensitive detection of AA using an RGB app installed on a smartphone, opening a new approach for the smart sensing of food contaminants.

Glutathione-modified graphene quantum dots as fluorescent probes for detecting organophosphorus pesticide residues in Radix Angelica Sinensis

A novel fluorescent sensor was developed in this study based on glutathione-functionalized graphene quantum dots (GQDs@GSH) to detect organophosphorus pesticide residues in Radix Angelica Sinensis. GQDs@GSH was synthesized by a one-step pyrolysis method with a fluorescence quantum yield as high as 33.9% and its structure was characterized by transmission electron microscopy and X-ray photoelectron spectroscopy. GQDs@GSH exhibited excellent fluorescence property showing strong blue fluorescence under UV irradiation. The fluorescence of GQDs@GSH could be quenched by Fe³⁺ by electron transfer and the quenched fluorescence could be recovered due to the strong chelating and reducing ability of phytic acid (PA). Under the catalyzation of acetylcholinesterase (AChE) and choline oxidase (ChOx), acetylcholine (ACh) could be decomposed to H₂O₂, which could further oxidize Fe²⁺ to Fe³⁺ thus quenching the fluorescence of GQDs@GSH once again. Coumaphos, a kind of organophosphorus pesticide, could inhibit AChE activity, thus making the quenched fluorescence turn on again. Several parameters influencing the fluorescence response such as Fe³⁺, PA, ACh and coumaphos concentration, pH value and reaction time were optimized. Based on such a fluorescence "off-on-off-on" ngkmechanism, GQDs@GSH was successfully applied to the detection of coumaphos in Radix Angelica Sinensis. A good linear relationship between the fluorescence intensity and coumaphos concentration was obtained in the range of 0.1-10.0 μmol·L^-1. By a standard addition method, the recoveries were measured to be 101.44-117.90% with RSDs lower than 1.98%. The biosensor system is simple, sensitive and accurate. It has a good application prospect in the detection of organophosphorus pesticide residues in traditional Chinese medicine and agricultural products, and also expanded the application scope for glutathione as a highly selective biological molecule.

Reduced graphene oxide on silver nanoparticle layers-decorated titanium dioxide nanotube arrays as SERS-based sensor for glyphosate direct detection in environmental water and soil

When glyphosate, a widely used organophosphate herbicide in agricultural applications, contaminates the environment, it could lead to chronic harm to human health. Herein, an efficient, air-stable and reusable surface-enhanced Raman scattering (SERS) substrate was designed to be an analytical tool for direct determination of glyphosate. A vertical heterostructure of reduced graphene oxide (rGO)-wrapped dual-layers silver nanoparticles (AgNPs) on titania nanotube (TiO2 NTs) arrays was constructed as a SERS substrate. The TiO2 NTs/AgNPs-rGO exhibited high SERS performance for methylene blue detection, offering an analytical enhancement factor (AEF) as large as 7.1 × 108 and the limit of detection (LOD) as low as 10-14 M with repeatability of 4.4 % relative standard deviation (RSD) and reproducibility of 2.0 % RSD. The sensor was stable in ambient and was reusable after photo-degradation. The designed sensor was successfully applied for glyphosate detection with a LOD of 3 µg/L, which is below the maximum contaminant level of glyphosate in environmental water, as recommended by the U.S. EPA and the European Union. A uniqueness of this study is that there is no significant difference between the real-world applications of the SERS sensor on direct glyphosate analysis in environmental samples compared to an analysis using ultra-high performance liquid chromatography.

Tellurium-based chemical sensors

The various tellurium-based chemical sensors are described. This article focuses on four types of Tellurium sensors such as CdTe quantum dots-based sensor, Te thin films-based sensor, Te nanostructures or nanoparticles-based sensor, and TeO2-based sensor.

Red-Emitting Polymerizable Guanidinium Dyes as Fluorescent Probes in Molecularly Imprinted Polymers for Glyphosate Detection

The development of methodologies to sense glyphosate has gained momentum due to its toxicological and ecotoxicological effects. In this work, a red-emitting and polymerizable guanidinium benzoxadiazole probe was developed for the fluorescence detection of glyphosate. The interaction of the fluorescent probe and the tetrabutylammonium salt of glyphosate was studied via UV/vis absorption and fluorescence spectroscopy in chloroform and acetonitrile. The selective recognition of glyphosate was achieved by preparing molecularly imprinted polymers, able to discriminate against other common herbicides such as 2,4-dichlorophenoxyacetic acid (2,4-D) and 3,6-dichloro-2-methoxybenzoic acid (dicamba), as thin layers on submicron silica particles. The limits of detection of 4.8 µM and 0.6 µM were obtained for the sensing of glyphosate in chloroform and acetonitrile, respectively. The reported system shows promise for future application in the sensing of glyphosate through further optimization of the dye and the implementation of a biphasic assay with water/organic solvent mixtures for sensing in aqueous environmental samples.

"Off-on" fluorescence probe based on green emissive carbon dots for the determination of Cu2+ ions and glyphosate and development of a smart sensing film for vegetable packaging

An ultra-sensitive glyphosate nanosensor, based on carbon dots (CDs), was successfully developed with excellent long-wavelength emission (530 nm), a high quantum yield (41.3%), and an impressive detection limit (0.8 ng·mL-1). This is the lowest value for glyphosate detection achieved by CD-based fluorescence analysis. The sensor was derived from a separate precursor, 1,4-dihydroxyanthraquinone, and was based on the "off-on" fluorescence analysis, where Cu2+ acts as a dynamic quencher and glyphosate as a fluorescence restorer (excitation wavelength 460 nm). Trace detection of glyphosate is possible with a wide detection range of 50-1300 ng·mL-1 and spiked recoveries between 93.3 and 110.0%. Exploration in depth confirmed that (1) the fluorescence of CDs was derived from the carbon core, (2) the large sp2 conjugated domain consisting of graphitic carbon and nitrogen contributed to the long-wavelength emission, and (3) CDs had an impressive binding interaction with Cu2+, which endow high sensitivity to glyphosate detection. The nanosensor has also be used as a dual-mode visual sensor and a smart sensing membrane that can identify glyphosate on the surface of vegetables, thus showing good practical applicability. Synthetic methods of G-CDs and its detection mechanisms for glyphosate.

Recent advances in synthesis and modification of carbon dots for optical sensing of pesticides

Serious threat from pesticide residues to the ecosystem and human health has become a global concern. Developing reliable methods for monitoring pesticides is a world-wide research hotspot. Carbon dots (CDs) with excellent photostability, low toxicity, and good biocompatibility have been regarded as the potential substitutes in fabricating various optical sensors for pesticide detection. Based on the relevant high-quality publications, this paper first summarizes the current state-of-the-art of the synthetic and modification approaches of CDs. Then, a comprehensive overview is given on the recent advances of CDs-based optical sensors for pesticides over the past five years, with a particular focus on photoluminescent, electrochemiluminescent and colorimetric sensors regarding the sensing mechanisms and design principles by integrating with various recognition elements including antibodies, aptamers, enzymes, molecularly imprinted polymers, and some nanoparticles. Novel functions and extended applications of CDs as signal indicators, catalyst, co-reactants, and electrode surface modifiers, in constructing optical sensors are specially highlighted. Beyond an assessment of the performances of the real-world application of these proposed optical sensors, the existing inadequacies and current challenges, as well as future perspectives for pesticide monitoring are discussed in detail. It is hoped to provide powerful insights for the development of novel CDs-based sensing strategies with their wide application in different fields for pesticide supervision.

A pyrene-based ratiometric probe for nanomolar level detection of glyphosate in food and environmental samples and its application for live-cell imaging

An in situ formed copper(ii)-complex is involved in analyzing glyphosate in real-life samples, such as crops, soil, water and biological fluids.

NPA-Cu2+ Complex as a Fluorescent Sensing Platform for the Selective and Sensitive Detection of Glyphosate

Glyphosate is a highly effective, low-toxicity, broad-spectrum herbicide, which is extensively used in global agriculture to control weeds and vegetation. However, glyphosate has become a potential threat to human and ecosystem because of its excessive usage and its bio-concentration in soil and water. Herein, a novel turn-on fluorescent probe, N-n-butyl-4-(3-pyridin)ylmethylidenehydrazine-1,8-naphthalimide (NPA), is proposed. It efficiently detected Cu2+ within the limit of detection (LOD) of 0.21 μM and displayed a dramatic turn-off fluorescence response in CH3CN. NPA-Cu2+ complex was employed to selectively and sensitively monitor glyphosate concentrations in real samples accompanied by a fluorescence turn-on mode. A good linear relationship between NPA and Cu2+ of glyphosate was found in the range of 10-100 μM with an LOD of 1.87 μM. Glyphosate exhibited a stronger chelation with Cu2+ than NPA and the system released free NPA through competitive coordination. The proposed method demonstrates great potential in quantitatively detecting glyphosate in tap water, local water from Songhua River, soil, rice, millet, maize, soybean, mung bean, and milk with mild conditions, and is a simple procedure with obvious consequences and no need for large instruments or pretreatment.

Fluorescence-Based Sensing of Pesticides Using Supramolecular Chemistry

The detection of pesticides in real-world environments is a high priority for a broad range of applications, including in areas of public health, environmental remediation, and agricultural sustainability. While many methods for pesticide detection currently exist, the use of supramolecular fluorescence-based methods has significant practical advantages. Herein, we will review the use of fluorescence-based pesticide detection methods, with a particular focus on supramolecular chemistry-based methods. Illustrative examples that show how such methods have achieved success in real-world environments are also included, as are areas highlighted for future research and development.

Novel Nondestructive Biosensors for the Food Industry

An increasing number of foodborne outbreaks, growing consumer desire for healthier products, and surging numbers of food allergy cases necessitate strict handling and screening of foods at every step of the food supply chain. Current standard procedures for detecting food toxins, contaminants, allergens, and pathogens require costly analytical devices, skilled technicians, and long sample preparation times. These challenges can be overcome with the use of biosensors because they provide accurate, rapid, selective, qualitative, and quantitative detection of analytes. Their ease of use, low-cost production, portability, and nondestructive measurement techniques also enable on-site detection of analytes. For this reason, biosensors find many applications in food safety and quality assessments. The detection mechanisms of biosensors can be varied with the use of different transducers, such as optical, electrochemical, or mechanical. These options provide a more appropriate selection of the biosensors for the intended use. In this review, recent studies focusing on the fabrication of biosensors for food safety or food quality purposes are summarized. To differentiate the detection mechanisms, the review is divided into sections based on the transducer type used.

Development of an ultrasensitive spectrophotometric method for carmine determination based on fluorescent carbon dots

A high-efficiency spectrophotometric method based on nitrogen-doped fluorescent carbon dots (N-FCDs) was developed for the ultrasensitive determination of carmine (CRM) in foodstuffs. The N-FCDs were fabricated via a one-pot hydrothermal method with m-phenylenediamine as the starting material. The detection principle was based on the fluorescence quenching effect of N-FCDs by CRM, where their interaction was due to the inner filter effect (IFE) and static quenching. A good linear relationship was established for CRM detection in a concentration range of 0.1-10.0 μM with a detection limit as low as 11.2 nM. The proposed method achieved satisfactory results for CRM determination in commercial food products with recoveries better than 98.6% and relative standard deviations (RSDs) less than 4.07%. The method established in this study was simple, ultrasensitive and reliable for rapid detecting CRM in a food matrix, which could be potentially used as a useful sensing agent for the analysis of additive food colourants.

Development of a highly sensitive fluorescence method for tartrazine determination in food matrices based on carbon dots

In this work, an ultrasensitive sensing system based on fluorescent carbon dots (CDs) was developed for the tartrazine (Tar) determination. The CDs were prepared via a simple one-pot hydrothermal method with m-phenylenediamine as the only precursor. The physical and chemical properties were in detail characterized by transmission electron microscopy (TEM), MALDI-TOF MS, UV-vis absorption and photoluminescence (PL) spectroscopy, elemental analysis, and Fourier transform infrared spectroscopy (FTIR). Upon exposure to Tar, the fluorescence of CDs was efficiently quenched via the dynamic interaction between CDs and Tar as well as the inner filter effect (IFE). With this information, the CDs were proposed as a fluorescence probe for Tar detection. It was found that CDs had high sensitivity and selectivity for Tar sensing, and the linear relationship was observed in the range of 0.01-25.0 μM with the corresponding detection limit (3σ/k) of 12.4 nM, which is much more sensitive than any of the existed CD-based sensing platform. The investigated sensing system was finally utilized for Tar sensing in various food matrices with a high degree of accuracy. The spiked recoveries were in a range of 96.4-105.2%, and the relative standard deviations (RSDs) were lower than 4.13%. This work highlights the great application prospects of CDs for Tar sensing in a rapid, simple, and sensitive way.

CdTe QD-based inhibition and reactivation assay of acetylcholinesterase for the detection of organophosphorus pesticides

An enzyme immobilized glutathione (GSH)-capped CdTe quantum dot (QD)-based fluorescence assay has been developed for monitoring organophosphate pesticides.