A review on the application of inorganic nano-structured materials in the modification of textiles: focus on anti-microbial properties

Silver Nanoparticles Functionalized with Polymeric Substances to Reduce the Growth of Planktonic and Biofilm Opportunistic Pathogens

The global rise in antimicrobial resistance, particularly among ESKAPE pathogens, has intensified the demand for alternative therapeutic strategies. Silver nanoparticles (AgNPs) have exhibited broad-spectrum antimicrobial activity and represent a promising approach to combat multidrug-resistant infections. This study aimed to synthesize and functionalize AgNPs using various polymeric agents-ethylene glycol (EG), polyethylene glycol (PEG), polyvinylpyrrolidone (PVP), and their combinations-and to evaluate their antimicrobial and antibiofilm efficacy against clinically relevant bacterial strains. AgNPs were synthesized via chemical reduction and functionalized as Ag@EG, Ag@PEG, Ag@EG/PVP, and Ag@PEG/PVP. A total of 68 clinical isolates-including Staphylococcus aureus, Staphylococcus epidermidis, Staphylococcus lugdunensis, Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa-were tested. Antimicrobial susceptibility was assessed using disc diffusion and broth microdilution assays, while antibiofilm activity was evaluated via the crystal violet method. Among all tested formulations, Ag@EG/PVP exhibited the highest antimicrobial and antibiofilm activity, with notably low minimum inhibitory concentrations (MIC50) and minimum biofilm eradication concentrations (MBEC50) for Ps. aeruginosa and K. pneumoniae. In contrast, AgNPs functionalized with PEG or EG alone showed limited efficacy. Biofilm-forming isolates, particularly Staphylococcus spp., required higher concentrations for inhibition. These results highlight the critical role of functionalization in modulating the antimicrobial properties of AgNPs, with Ag@EG/PVP demonstrating potent activity against both planktonic and biofilm-associated multidrug-resistant bacteria. Overall, this study supports further developing AgNPs-based formulations as adjuncts or alternatives to conventional antibiotics, particularly for managing biofilm-related infections. Future research should focus on formulation optimization, safety assessment, and translational potential.

Antimicrobial protection of fabrics with poly(allylamine hydrochloride)-ZnO coating

Microbial infections are causing numerous deaths and can be found on various surfaces such as fabrics used in healthcare facilities as wound dressings or protective clothing in operating or sterile rooms. The study aimed to determine the difference in antibacterial activity of sheet, sphere, and rod-like ZnO NPs embedded in poly(allylamine hydrochloride) (PAH) multilayers on cotton, nylon, and polyester with Staphylococcus aureus. Additionally, the adhesion of recombinant human SARS-CoV-2 RBD S-protein on the coated materials and the water droplet absorption after placement on the fabric surface were tested. Results demonstrated that PAH/ZnO coating with rod-like NPs achieved the highest antibacterial activity on the cotton fabric, with the Staphylococcus aureus cell viability reduced by more than 99%. ZnO NPs significantly reduced bacterial surface coverage on textiles, particularly on cotton and polyester. The adhesion of SARS-CoV-2 RBD protein was reduced considerably on the coated nylon fabrics due to the change in the material's hydrophobicity and wettability. Due to its better ZnO NP adherence, cotton demonstrated slightly higher antibacterial performance than polyester and nylon, showing potential for wound dressings, especially with the addition of rod-like ZnO NPs. PAH/ZnO coated nylon showed potential for usage in protective clothing in operating and sterile rooms against bacteria, viral adhesion, and aerosol absorption through the fabrics to the skin.

Albumin nanoparticles are a promising drug delivery system in dentistry

Periodontal infection is a long-lasting inflammatory condition caused by the growth and development of an abnormal and harmful community of microorganisms. This destructive illness leads to the loss of the tissues that support the teeth, degradation of the bone surrounding the teeth, and eventually tooth loss. To treat oral infections, it is necessary to use nonsurgical methods such as antibiotics. However, the indiscriminate and incorrect use of antibiotics results in drug resistance. Among these alternate therapeutic options, using nanoparticles to treat infectious dental disease was particularly significant. Consequently, researchers have worked to develop an effective and satisfactory drug delivery method for treating periodontal and dental illnesses. Albumin nanoparticles serve a considerable function as carriers in the drug delivery of chemical and biomolecular medications, such as anticancer treatments; they have several advantages, including biocompatibility and biodegradability, and they are well-tolerated with no adverse effects. Albumin nanoparticles have several benefits over other nanomaterials. Protein nanocarriers provide advantages such as biocompatibility, biodegradability, reduced immunogenicity, and lower cytotoxicity. Furthermore, this nanoparticle demonstrated significant intrinsic antibacterial properties without being loaded with antibiotic medicines. As a medication and antibacterial nanoparticle delivery method, albumin nanoparticles have substantial applications in periodontal and dental infectious disorders such as periodontal infection, apical periodontitis, and peri-implantitis. As a result, in this article, we studied the usage of albumin nanoparticles in dental disorders.

Cyclodextrins: Advances in Chemistry, Toxicology, and Multifaceted Applications

Cyclodextrins (CDs) have garnered significant attention in various scientific and industrial fields due to their unique ability to form inclusion complexes with a wide range of guest molecules. This review comprehensively explores the latest advancements in cyclodextrin chemistry, focusing on the synthesis and characterization of cyclodextrin derivatives and their inclusion complexes. This review examines the biological activities of cyclodextrins, highlighting their pharmacological properties and pharmacokinetics, and discussing their promising applications in drug delivery systems. Furthermore, the industrial utilization of cyclodextrins, including their role in nanomaterials and nanostructured coatings, as well as their potential in environmental remediation, are explored. The present research also addresses the critical aspect of toxicity, particularly concerning cyclodextrin inclusion complexes, providing an overview of the current understanding and safety considerations. Through a multidisciplinary approach, the aim is to present a complete view of cyclodextrins, underscoring their versatility and impact across various domains.

A highly efficient modified nano-activated carbon adsorbent for separation of ammonia from water: Experimental and kinetics elucidations

Water is essential for the survival of all living things; however, its extensive use in agriculture, high-tech manufacturing, energy production, and the rapid development of the chemical and petroleum industries has led to significant contamination, making water pollution a major concern today. Ammonia is one of the most harmful contaminants present in water, posing significant environmental and health risks that require appropriate remediation methods. To remove ammonia from contaminated water, we employ Carbon Nanotubes (CNTs) and Activated Carbon (AC). To ensure appropriate metal impregnation on the adsorbents, Fe, Al, Ag, and Cu were impregnated into both CNT and AC, followed by extensive characterization using Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), and Energy Dispersive X-rays (EDX). To optimize ammonia removal from water, several parameters were adjusted, including pH, dose amount, contact time, shaking speed, and temperature. Astonishingly, the highest removal efficiency of 40% was achieved with a 1 g dosage at pH 10.5 and 200 RPM, while silver oxide had a lower removal rate of 10% under the same conditions. Temperature additionally had a significant impact, with removal percentages reaching 40% at 70 °C as compared to 21.5% at 25 °C. Adsorption isotherms were used to analyze the experimental data, along with Langmuir and Freundlich's models. Notably, Langmuir produced superior curve fitting, resulting in a correlation factor close to one. Furthermore, kinetic modeling was carried out with 2nd-order and pseudo-2nd-order equations, with the latter responding better according to curve analysis. Because the ammonia removal rate was low, this study indicates the feasibility of implementing an adsorption technique using CNT and AC as a pre-treatment method for this purpose. This approach has the potential for future optimization and deployment in tackling water contamination concerns effectively.

Application of microbial agents in organic solid waste composting: a review

The rapid growth of organic solid waste has recently exacerbated environmental pollution problems, and its improper treatment has led to the loss of a large number of biomass resources. Here, we expound the advantages of microbial agents composting compared with conventional organic solid waste treatment technology, and review the important role of microbial agents composting in organic solid waste composting from the aspects of screening and identification, optimization of conditions, mechanism of action, combination with other technologies and ultra-high-temperature and ultra-low-temperature microbial composting. We discuss the value of microorganisms with different growth conditions in organic solid waste composting, and put forward a seasonal multi-temperature composite microbial composting technology. Provide new ideas for the all-round treatment of microbial agents in organic solid waste in the future. © 2024 Society of Chemical Industry.

Exogenously applied silver nanoparticles (AgNPs) differentially affect bacterial blight disease control in twenty-seven wheat cultivars

The bacterial blight of wheat is an important global disease causing a significant decline in crop yield. Nanotechnology offers a potential solution for managing plant diseases. Therefore, this research aimed to investigate the effectiveness of silver nanoparticles (AgNPs) in controlling bacterial blight in 27 locally grown wheat cultivars. The study examined the impact of AgNPs at three distinct time points: 1, 3, and 5 days after the onset of the disease. Biochemical assay revealed that one day after applying the disease stress, the Inia cultivar had the highest amount of soluble protein (55.60 μg.g-1FW) content in the treatment without AgNPs. The Azadi cultivar, without AgNPs treatment, had the lowest amount of soluble protein content (15.71 μg.g-1FW). The Tabasi cultivar had the highest activity of the superoxide dismutase (SOD) (61.62 mM.g-1FW) with the combination treatment of AgNPs. On the other hand, the Karchia cultivar had the lowest SOD activity (0.6 mM.g-1FW) in the treatment of disease without AgNPs. Furthermore, three days after the application of stress, the Mahdavi cultivar had the highest amount of soluble protein content (54.16 μg.g-1FW) in the treatment of disease without AgNPs. The Niknejad cultivar had the highest activity of the SOD (74.15 mM.g-1FW) with the combined treatment of the disease without AgNPs. The Kavir cultivar had the lowest SOD activity (1.95 mM.g-1FW) and the lowest peroxidase (POX) activity (0.241 mM g-1FW min-1) in the treatment of the disease with AgNPs. Five days after exposure to stress, the Mahooti cultivar had the highest SOD activity (88.12 mM.g-1FW) with the combined treatment of the disease with AgNPs, and the Karchia cultivar had the lowest SOD activity (2.39 mM.g-1FW) in the treatment of the disease with AgNPs. Further, the results indicated that exposure to AgNPs could improve the antioxidant properties of wheat seeds in blight-infected and disease-free conditions in some cultivars.

Advances in skin gene therapy: utilizing innovative dressing scaffolds for wound healing, a comprehensive review

The skin, serving as the body's outermost layer, boasts a vast area and intricate structure, functioning as the primary barrier against external threats. Disruptions in the composition and functionality of the skin can lead to a diverse array of skin conditions, such as wounds, burns, and diabetic ulcers, along with inflammatory disorders, infections, and various types of skin cancer. These disorders not only exacerbate concerns regarding skin health and beauty but also have a significant impact on mental well-being. Due to the complexity of these disorders, conventional treatments often prove insufficient, necessitating the exploration of new therapeutic approaches. Researchers develop new therapies by deciphering these intricacies and gaining a thorough understanding of the protein networks and molecular processes in skin. A new window of opportunity has opened up for improving wound healing processes because of recent advancements in skin gene therapy. To enhance skin regeneration and healing, this extensive review investigates the use of novel dressing scaffolds in conjunction with gene therapy approaches. Scaffolds that do double duty as wound protectors and vectors for therapeutic gene delivery are being developed using innovative biomaterials. To improve cellular responses and speed healing, these state-of-the-art scaffolds allow for the targeted delivery and sustained release of genetic material. The most recent developments in gene therapy techniques include RNA interference, CRISPR-based gene editing, and the utilization of viral and non-viral vectors in conjunction with scaffolds, which were reviewed here to overcome skin disorders and wound complications. In the future, there will be rare chances to develop custom methods for skin health care thanks to the combination of modern technology and collaboration among disciplines.

Continuous preparation and antibacterial mechanisms of biodegradable polylactic acid/nano-zinc oxide/additives antibacterial non-wovens

Biodegradable polylactic acid (PLA)/nano‑zinc oxide (ZnO)/additives non-woven slices were prepared by melt blending method. The effects of antibacterial agent nano-ZnO, antioxidant pentaerythrityl tetrakis-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate (1010), and chain extender multi-functional epoxy (ADR), on the melt flow rate, mechanical properties, thermal stabilities and micromorphology of the slices were investigated. The melt flow rate decreased from 26.94 g/10 min to 17.76 g/10 min, and the tensile strength increased from 10.518 MPa to 30.427 MPa with the increase of nano-ZnO and additives content. The slices were further spunbonded. The wettability and antibacterial properties of PLA/nano-ZnO/additives antibacterial non-wovens were studied, and the antibacterial action mechanism was clarified. The results showed that the biodegradable PLA/nano-ZnO/additives antibacterial non-wovens were prepared continuously successfully. The prepared non-woven fabrics exhibited good hydrophobicity and antibacterial properties. The mechanism study shows that zinc ion produced by nano-ZnO and photocatalytic reaction make the fabrics have good antibacterial activity at low nano-ZnO content. When nano-ZnO concentration reaches 1.5 wt%, the antibacterial rate against Escherichia coli and Staphylococcus aureus reaches 98.52 % and 98.13 %, respectively.

Nanoformulations in Pharmaceutical and Biomedical Applications: Green Perspectives

This study provides a brief discussion of the major nanopharmaceuticals formulations as well as the impact of nanotechnology on the future of pharmaceuticals. Effective and eco-friendly strategies of biofabrication are also highlighted. Modern approaches to designing pharmaceutical nanoformulations (e.g., 3D printing, Phyto-Nanotechnology, Biomimetics/Bioinspiration, etc.) are outlined. This paper discusses the need to use natural resources for the "green" design of new nanoformulations with therapeutic efficiency. Nanopharmaceuticals research is still in its early stages, and the preparation of nanomaterials must be carefully considered. Therefore, safety and long-term effects of pharmaceutical nanoformulations must not be overlooked. The testing of nanopharmaceuticals represents an essential point in their further applications. Vegetal scaffolds obtained by decellularizing plant leaves represent a valuable, bioinspired model for nanopharmaceutical testing that avoids using animals. Nanoformulations are critical in various fields, especially in pharmacy, medicine, agriculture, and material science, due to their unique properties and advantages over conventional formulations that allows improved solubility, bioavailability, targeted drug delivery, controlled release, and reduced toxicity. Nanopharmaceuticals have transitioned from experimental stages to being a vital component of clinical practice, significantly improving outcomes in medical fields for cancer treatment, infectious diseases, neurological disorders, personalized medicine, and advanced diagnostics. Here are the key points highlighting their importance. The significant challenges, opportunities, and future directions are mentioned in the final section.

Advances in stabilization of metallic nanoparticle with biosurfactants- a review on current trends

Recently, research based on new biomaterials for stabilizing metallic nanoparticles has increased due to their greater environmental friendliness and lower health risk. Their stability is often a critical factor influencing their performance and shelf life. Nowadays, the use of biosurfactants is gaining interest due to their sustainable advantages. Biosurfactants are used for various commercial and industrial applications such as food processing, therapeutic applications, agriculture, etc. Biosurfactants create stable coatings surrounding nanoparticles to stop agglomeration and provide long-term stability. The present review study describes a collection of important scientific works on stabilization and capping of metallic nanoparticles as biosurfactants. This review also provides a comprehensive overview of the intrinsic properties and environmental aspects of metal nanoparticles coated with biosurfactants. In addition, future methods and potential solutions for biosurfactant-mediated stabilization in nanoparticle synthesis are also highlighted. The objective of this study is to ensure that the stabilized nanoparticles exhibit biocompatible properties, making them suitable for applications in medicine and biotechnology.

Mechanophysical and Anti-Adhesive Properties of a Nanoclay-Containing PMMA Denture Resin

Poly(methyl methacrylate) (PMMA) is commonly used for dental dentures, but it has the drawback of promoting oral health risks due to oral bacterial adhesion. Recently, various nanoparticles have been incorporated into PMMA to tackle these issues. This study aims to investigate the mechanophysical and antimicrobial adhesive properties of a denture resin by incorporating of nanoclay into PMMA. Specimens were prepared by adding 0, 1, 2, and 4 wt % surface-modified nanoclay (Sigma) to self-polymerizing PMMA denture resin. These specimens were then evaluated using FTIR, TGA/DTG, and FE-SEM with EDS. Various mechanical and surface physical properties, including nanoindentation, were measured and compared with those of pure PMMA. Antiadhesion experiments were conducted by applying a Candida albicans (ATCC 11006) suspension to the surface of the specimens. The antiadhesion activity of C. albicans was confirmed through a yeast-wall component (mannan) and mRNA-seq analysis. The bulk mechanical properties of nanoclay-PMMA composites were decreased compared to those of pure PMMA, while the flexural strength and modulus met the ISO 20795-1 requirement. However, there were no significant differences in the nanoindentation hardness and elastic modulus. The surface energy revealed a significant decrease at 4 wt % nanoclay-PMMA. The antiadhesion effect of Candida albicans was evident along with nanoclay content in the nanocomposites and confirmed by the reduced attachment of mannan on nanoclay-PMMA composites. mRNA-seq analysis supported overall transcriptome changes in altering attachment and metabolism behaviors on the surface. The nanoclay-PMMA materials showed a lower surface energy as the content increased, leading to an antiadhesion effect against Candida albicans. These findings indicate that incorporating nanoclay into PMMA surfaces could be a valuable strategy for preventing the fungal biofilm formation of denture base materials.

Antipathogenic Efficacy of Biogenic Silver Nanoparticles and Antibiofilm Activities Against Multi-drug-Resistant ESKAPE Pathogens

The silver nanoparticles (AgNPs) were produced by employing a biogenic loom and tested for antipathogenic assets against multi-drug-resistant (MDR) ESKAPE bacteria. Biogenically synthesized AgNPs were characterized adopting various high-throughput techniques such as UHRTEM, SEM with EDX, DLS, TGA-DTA, and XRD and spectroscopic analysis showed polydispersion of nanoparticles. In this context, AgNPs with the attribute of spherical-shaped nanoparticles with an average size of 26 nm were successfully synthesized utilizing bacterial supernatant. The antipathogenic activities of AgNPs were assessed against 11 strains of MDR ESKAPE bacteria including Enterococcus faecium; methicillin-resistant Staphylococcus aureus; Klebsiella pneumonia; Acinetobacter baumannii; Pseudomonas aeruginosa; Enterobacter aerogenes; and Enterobacter species. The exposure of biogenic AgNPs in a well diffusion assay showed all the growth inhibitions of ESKAPE bacteria at 200 μg/ml after 18 h of incubation. Growth kinetics demonstrated maximum killing at 60 μg/ml after 4 h of completion. The highest biofilm depletions were found at 100 μg/ml in adhesion assay. Live/dead assays showed effective killing of the ESKAPE bacteria at 10 μg/ml in pre-existing biofilms. The effective inhibitory concentrations of AgNPs were investigated ranging from 10 to 200 μg/ml. The selected pathogens found sensitive to AgNPs are statistically significant (P < 0.05) than that of cefotaxime/AgNO3. Consequently, a broad spectrum of antimicrobial potentials of AgNPs can be alternative to conventional antimicrobial agents for future medicine.

Poly(Allylamine Hydrochloride) and ZnO Nanohybrid Coating for the Development of Hydrophobic, Antibacterial, and Biocompatible Textiles

In healthcare facilities, infections caused by Staphylococcus aureus (S. aureus) from textile materials are a cause for concern, and nanomaterials are one of the solutions; however, their impact on safety and biocompatibility with the human body must not be neglected. This study aimed to develop a novel multilayer coating with poly(allylamine hydrochloride) (PAH) and immobilized ZnO nanoparticles (ZnO NPs) to make efficient antibacterial and biocompatible cotton, polyester, and nylon textiles. For this purpose, the coated textiles were characterized with profilometry, contact angles, and electrokinetic analyzer measurements. The ZnO NPs on the textiles were analyzed by scanning electron microscopy and inductively coupled plasma mass spectrometry. The antibacterial tests were conducted with S. aureus and biocompatibility with immortalized human keratinocyte cells. The results demonstrated successful PAH/ZnO coating formation on the textiles, demonstrating weak hydrophobic properties. Furthermore, PAH multilayers caused complete ZnO NP immobilization on the coated textiles. All coated textiles showed strong growth inhibition (2-3-log reduction) in planktonic and adhered S. aureus cells. The bacterial viability was reduced by more than 99%. Cotton, due to its better ZnO NP adherence, demonstrated a slightly higher antibacterial performance than polyester and nylon. The coating procedure enables the binding of ZnO NPs in an amount (<30 µg cm-2) that, after complete dissolution, is significantly below the concentration causing cytotoxicity (10 µg mL-1).

Application of Argon Plasma Technology for the Synthesis of Anti-Infective Copper Nanoparticles

The synthesis of copper nanoparticles (CuNPs) was accomplished by using a rapid, green, and versatile argon plasma reduction method that involves solvent extraction. With this method, a plasma-solid state interaction forms and CuNPs can be synthesized from copper(II) sulfate using a low-pressure, low-temperature argon plasma. Characterization studies of the CuNPs revealed that when a metal precursor is treated under optimal experimental conditions of 80 W of argon plasma for 300 s, brown CuNPs are synthesized. However, when those same brown CuNPs are placed in Milli-Q water for a period of 10 days, oxidation occurs and green CuNPs are formed. Confirmation of the chemical identity of the CuNPs was performed by using X-ray photoelectron spectroscopy. The results reveal that the brown CuNPs are predominantly Cu0 or what we refer to as CuNPs, while the green CuNPs are a mixture of Cu0 and Cu(OH)2 NPs. Upon further characterization of both brown and green CuNPs with scanning electron microscopy (SEM), the results depict brown CuNPs with a rod-like shape and approximate dimensions of 40 nm × 160 nm, while the green CuNPs were smaller in size, with dimensions of 40-80 nm, and more of a round shape. When testing the antibacterial activity of both brown and green CuNPs, our findings demonstrate the effectiveness of both CuNPs against Escherichia coli and Staphylococcus aureus bacteria at a concentration of 17 μg/mL. The inactivation of S. aureus and E. coli 7-day-old biofilms required CuNP concentrations of 99 μg/mL. SEM images of treated 7-day-old S. aureus and E. coli biofilms depict cell membranes that are completely damaged, suggesting a physical killing mechanism. In addition, when the same concentration of CuNPs used to inactivate biofilms were tested with human fibroblasts, both brown and green CuNPs were found to be biocompatible.

A critical review on fate, behavior, and ecotoxicological impact of zinc oxide nanoparticles on algae

The rapid inclusion of zinc oxide nanoparticles (ZnO NPs) in nanotechnology-based products over the last decade has generated a new threat in the apprehension of the environment. The massive use of zinc nanosized products will certainly be disposed of and be released, eventually entering the aquatic ecosystem, posing severe environmental hazards. Moreover, nanosized ZnO particles owing the larger surface area per volume exhibit different chemical interactions within the aquatic ecosystem. They undergo diverse potential transformations because of their unique physiochemical properties and the feature of receiving medium. Therefore, assessment of their impact is critical not only for scavenging the present situation but also for preventing unintended environmental hazards. Algae being a primary producer of the aquatic ecosystem help assess the risk of massive NPs usage in environmental health. Because of their nutritional needs and position at the base of aquatic food webs, algal indicators exhibit relatively unique information concerning ecosystem conditions. Moreover, algae are presently the most vital part of the circular economy. Hence, it is imperative to understand the physiologic, metabolic, and morphologic changes brought by the ZnO NPs to the algal cells along with the development of the mechanism imparting toxicity mechanism. We also need to develop an appropriate scientific strategy in the innovation process to restrain the exposure of NPs at safer levels. This review provides the details of ZnO NP interaction with algae. Moreover, their impact, mechanism, and factors affecting toxicity to the algae are discussed.

Green and cost-effective biofabrication of copper oxide nanoparticles: Exploring antimicrobial and anticancer applications

Nanotechnology has made remarkable advancements in recent years, revolutionizing various scientific fields, industries, and research institutions through the utilization of metal and metal oxide nanoparticles. Among these nanoparticles, copper oxide nanoparticles (CuO NPs) have garnered significant attention due to their versatile properties and wide-range applications, particularly, as effective antimicrobial and anticancer agents. CuO NPs can be synthesized using different methods, including physical, chemical, and biological approaches. However, conventional chemical and physical approaches are expensive, resource-intensive, and involve the use of hazardous chemicals, which can pose risks to human health and the environment. In contrast, biological synthesis provides a sustainable and cost-effective alternative by eliminating chemical pollutants and allowing for the production of CuO NPs of tailored sizes and shapes. This comprehensive review focused on the green synthesis of CuO NPs using various biological resources, such as plants, microorganisms, and other biological derivatives. Current knowledge and recent trends in green synthesis methods for CuO NPs are discussed, with a specific emphasis on their biomedical applications, particularly in combating cancer and microbial infections. This review highlights the significant potential of CuO NPs in addressing these diseases. By capitalizing on the advantages of biological synthesis, such as environmental safety and the ability to customize nanoparticle characteristics, CuO NPs have emerged as promising therapeutic agents for a wide range of conditions. This review presents compelling findings, demonstrating the remarkable achievements of biologically synthesized CuO NPs as novel therapeutic agents. Their unique properties and mechanisms enable effective combating against cancer cells and various harmful microbial infections. CuO NPs exhibit potent anticancer activity through diverse mechanisms, including induction of apoptosis, inhibition of angiogenesis, and modulation of signaling pathways. Additionally, their antimicrobial activity manifests through various mechanisms, such as disrupting microbial membranes, generating reactive oxygen species, and interfering with microbial enzymes. This review offers valuable insights into the substantial potential of biologically synthesized CuO NPs as an innovative approach for future therapeutic interventions against cancer and microbial infections.

Silver Nanoparticles Induced Metabolic Perturbations in Pseudomonas aeruginosa: Evaluation Using the UPLC-QTof-MSE Platform

Silver nanoparticles (AgNPs) have been widely utilized in various biomedical and antimicrobial technologies, displaying broad-spectrum activities against Gram-negative and Gram-positive bacteria including multidrug-resistant strains. However, the emergence of resistance to AgNPs upon repeated exposure and the survival of bacteria after initial exposure to antimicrobial agents pose a threat, as they may lead to the development of new resistant populations. To combat the early stages of antibacterial resistance, systematic analysis is essential to understand the immediate response of bacteria to antimicrobial agents. In this study, green-synthesized AgNPs with a diameter of approximately 14 nm were exposed toPseudomonas aeruginosaat three different inhibitory concentrations and at two different time intervals (1 and 4 h) to investigate the perturbations in the metabolome using liquid chromatography-high-resolution mass spectrometry. MetaboAnalyst 5.0 was employed for univariate and multivariate analysis, and the affected metabolic pathways were constructed using a variable important in projection scores above 1 from PLS-DA. The study revealed significant alterations in metabolites associated with cell wall synthesis, energy metabolism, nucleotide metabolism, the TCA cycle, and anaplerotic intermediates of the TCA cycle. Our investigation aimed to comprehensively understand the effects of green-synthesized AgNPs onP. aeruginosa metabolism, providing a more precise snapshot of the bacterium's physiological state through metabolomics approach.

Enhancing biocathode denitrification performance with nano-Fe3O4 under polarity period reversal

The presence of excessive concentrations of nitrate poses a threat to both the environment and human health, and the bioelectrochemical systems (BESs) are attractive green technologies for nitrate removal. However, the denitrification efficiency in the BESs is still limited by slow biofilm formation and nitrate removal. In this work, we demonstrate the efficacy of novel combination of magnetite nanoparticles (nano-Fe3O4) with the anode-cathode polarity period reversal (PPR-Fe3O4) for improving the performance of BESs. After only two-week cultivation, the highest cathodic current density (7.71 ± 1.01 A m-2) and NO3--N removal rate (8.19 ± 0.97 g m-2 d-1) reported to date were obtained in the PPR-Fe3O4 process (i.e., polarity period reversal with nano-Fe3O4 added) at applied working voltage of -0.2 and -0.5 V (vs Ag/AgCl) under bioanodic and biocathodic conditions, respectively. Compared with the polarity reversal once only process, the PPR process (i.e., polarity period reversal in the absence of nano-Fe3O4) enhanced bioelectroactivity through increasing biofilm biomass and altering microbial community structure. Nano-Fe3O4 could enhance extracellular electron transfer as a result of promoting the formation of extracellular polymers containing Fe3O4 and reducing charge transfer resistance of bioelectrodes. This work develops a novel biocathode denitrification strategy to achieve efficient nitrate removal after rapid cultivation.

Photocatalytic Antimicrobials: Principles, Design Strategies, and Applications

Nowadays, the increasing emergence of antibiotic-resistant pathogenic microorganisms requires the search for alternative methods that do not cause drug resistance. Phototherapy strategies (PTs) based on the photoresponsive materials have become a new trend in the inactivation of pathogenic microorganisms due to their spatiotemporal controllability and negligible side effects. Among those phototherapy strategies, photocatalytic antimicrobial therapy (PCAT) has emerged as an effective and promising antimicrobial strategy in recent years. In the process of photocatalytic treatment, photocatalytic materials are excited by different wavelengths of lights to produce reactive oxygen species (ROS) or other toxic species for the killing of various pathogenic microbes, such as bacteria, viruses, fungi, parasites, and algae. Therefore, this review timely summarizes the latest progress in the PCAT field, with emphasis on the development of various photocatalytic antimicrobials (PCAMs), the underlying antimicrobial mechanisms, the design strategies, and the multiple practical antimicrobial applications in local infections therapy, personal protective equipment, water purification, antimicrobial coatings, wound dressings, food safety, antibacterial textiles, and air purification. Meanwhile, we also present the challenges and perspectives of widespread practical implementation of PCAT as antimicrobial therapeutics. We hope that as a result of this review, PCAT will flourish and become an effective weapon against pathogenic microorganisms and antibiotic resistance.

Metal nanoparticles as a potential technique for the diagnosis and treatment of gastrointestinal cancer: a comprehensive review

Gastrointestinal (GI) cancer is a major health problem worldwide, and current diagnostic and therapeutic approaches are often inadequate. Various metallic nanoparticles (MNPs) have been widely studied for several biomedical applications, including cancer. They may potentially overcome the challenges associated with conventional chemotherapy and significantly impact the overall survival of GI cancer patients. Functionalized MNPs with targeted ligands provide more efficient localization of tumor energy deposition, better solubility and stability, and specific targeting properties. In addition to enhanced therapeutic efficacy, MNPs are also a diagnostic tool for molecular imaging of malignant lesions, enabling non-invasive imaging or detection of tumor-specific or tumor-associated antigens. MNP-based therapeutic systems enable simultaneous stability and solubility of encapsulated drugs and regulate the delivery of therapeutic agents directly to tumor cells, which improves therapeutic efficacy and minimizes drug toxicity and leakage into normal cells. However, metal nanoparticles have been shown to have a cytotoxic effect on cells in vitro. This can be a concern when using metal nanoparticles for cancer treatment, as they may also kill healthy cells in addition to cancer cells. In this review, we provide an overview of the current state of the field, including preparation methods of MNPs, clinical applications, and advances in their use in targeted GI cancer therapy, as well as the advantages and limitations of using metal nanoparticles for the diagnosis and treatment of gastrointestinal cancer such as potential toxicity. We also discuss potential future directions and areas for further research, including the development of novel MNP-based approaches and the optimization of existing approaches.

Occurrence and potential release of heavy metals in female underwear manufactured in China: Implication for women's health

Underwear is a potential source of women's exposure to heavy metals owing to its direct contact with the skin, especially the skin of the vagina and vulva, which has a strong absorptive capacity. However, information regarding the prevalence of metals in female underwear, and its potential hazards, remains scarce. In the present study, we examined the concentrations and potential release of Cr, Co, Ni, Cu, As, Cd, Sb, and Pb in brassieres and briefs manufactured in China. We detected higher levels of Pb and moderate levels of other metals, relative to the metal levels reported for other textiles in the literature. Cu, As, Ni and Cd, had higher migration rates (MRs) from the underwear, with medians of 100%, 100%, 30.1%, and 20.7%, respectively. The median MRs of the other metals were in the range 1.07%-15.7%. On the whole, the total and extractable concentrations of these metals differed by item and fabric type. The pollution of raw materials and the use of chemical additives containing metals commonly contributed to the metals in the underwear. On the basis of the exposure estimation, the non-carcinogenic risks posed by the underwear metals were acceptable, but the carcinogenic risks from the metals in 5.18% of brassiere samples exceeded the acceptable level.

Biochemical effects of copper nanomaterials in human hepatocellular carcinoma (HepG2) cells

In dose-response and structure-activity studies, human hepatic HepG2 cells were exposed for 3 days to nano Cu, nano CuO or CuCl2 (ions) at doses between 0.1 and 30 ug/ml (approximately the no observable adverse effect level to a high degree of cytotoxicity). Various biochemical parameters were then evaluated to study cytotoxicity, cell growth, hepatic function, and oxidative stress. With nano Cu and nano CuO, few indications of cytotoxicity were observed between 0.1 and 3 ug/ml. In respect to dose, lactate dehydrogenase and aspartate transaminase were the most sensitive cytotoxicity parameters. The next most responsive parameters were alanine aminotransferase, glutathione reductase, glucose 6-phosphate dehydrogenase, and protein concentration. The medium responsive parameters were superoxide dismutase, gamma glutamyltranspeptidase, total bilirubin, and microalbumin. The parameters glutathione peroxidase, glutathione reductase, and protein were all altered by nano Cu and nano CuO but not by CuCl2 exposures. Our chief observations were (1) significant decreases in glucose 6-phosphate dehydrogenase and glutathione reductase was observed at doses below the doses that show high cytotoxicity, (2) even high cytotoxicity did not induce large changes in some study parameters (e.g., alkaline phosphatase, catalase, microalbumin, total bilirubin, thioredoxin reductase, and triglycerides), (3) even though many significant biochemical effects happen only at doses showing varying degrees of cytotoxicity, it was not clear that cytotoxicity alone caused all of the observed significant biochemical effects, and (4) the decreased glucose 6-phosphate dehydrogenase and glutathione reductase support the view that oxidative stress is a main toxicity pathway of CuCl2 and Cu-containing nanomaterials.

Two-dimensional TiO nanosheets with photothermal effects for wound sterilization

To combat multidrug-resistant bacteria, researchers have poured into the development and design of antimicrobial agents. Here, low-cost two-dimensional (2D) antibacterial material titanium monoxide nanosheets (TiO NSs) were prepared by an ultrasonic-assisted liquid-phase exfoliation method. When cultured with bacteria, TiO NSs showed intrinsic antimicrobial capacity, possibly due to membrane damage caused by the sharp edges of TiO NSs. Under near-infrared (NIR) laser irradiation, TiO NSs showed high photothermal conversion efficiency (PTCE) and sterilization efficiency. By combining these two antibacterial mechanisms, TiO NSs exhibited a strong killing effect on Gram-negative Escherichia coli (E. coli) and Gram-positive methicillin-resistant Staphylococcus aureus (MRSA). Especially after treatment with TiO NSs (150 μg mL-1) +near-infrared (NIR) light irradiation, both bacteria were completely killed. In vivo experiments on wound repair of bacterial infection further confirmed its antibacterial effect. In addition, TiO NSs had no obvious toxicity or side effects, so as a kind of broad-spectrum 2D antibacterial nanoagent, TiO NSs have broad application prospects in the field of pathogen infection.

Effect of incorporating silica-hydroxyapatite-silver hybrid nanoparticles into the resin-modified glass ionomer on the adhesive remnant index score and shear bond strength of orthodontic metal brackets: An in vitro study

OBJECTIVES

This study aimed to assess the effect of addition of silica-hydroxyapatite-silver (Si-HA-Ag) hybrid nanoparticles to light-cure glass ionomer (GI) on shear bond strength (SBS) of metal brackets bonded with this adhesive and the adhesive remnant index (ARI) score.

MATERIAL AND METHODS

In this in vitro experimental study, 50 sound extracted premolars were assigned to 5 groups (n=10) for orthodontic metal bracket bonding with BracePaste® composite, Fuji ORTHO™ pure resin modified GI (RMGI), and RMGI reinforced with 2wt%, 5wt% and 10wt% Si-HA-Ag nanoparticles. The SBS of brackets was measured by a universal testing machine. Debonded specimens were inspected under a stereomicroscope at×10 magnification to determine the ARI score. Data were analyzed by one-way ANOVA, Scheffe test, Chi-square test, and Fisher's exact test (alpha=0.05).

RESULTS

The maximum mean SBS was recorded in BracePaste® composite followed by 2% RMGI, 0% RMGI, 5% RMGI and 10% RMGI. Only the difference between the BracePaste® composite and 10% RMGI was significant in this regard (P=0.006). The groups were not significantly different regarding the ARI scores (P=0.665). All the SBS values were within the clinically acceptable range.

CONCLUSION

Addition of 2wt% and 5wt% Si-HA-Ag hybrid nanoparticles to RMGI as orthodontic adhesive caused no significant change in SBS of orthodontic metal brackets while addition of 10wt% hybrid nanoparticles significantly decreased the SBS. Nonetheless, all the SBS values were within the clinically acceptable range. Addition of hybrid nanoparticles had no significant effect on the ARI score.

Textile Electronics with Laser-Induced Graphene/Polymer Hybrid Fibers

The concept of wearables is rapidly evolving from flexible polymer-based devices to textile electronics. The reason for this shift is the ability of textiles to ensure close contact with the skin, resulting in comfortable, lightweight, and compact "always with you" sensors. We are contributing to this polymer-textile transition by introducing a novel and simple way of laser intermixing of graphene with synthetic fabrics to create wearable sensing platforms. Our hybrid materials exhibit high electrical conductivity (87.6 ± 36.2 Ω/sq) due to the laser reduction of graphene oxide and simultaneous laser-induced graphene formation on the surface of textiles. Furthermore, the composite created between graphene and nylon ensures the durability of our materials against sonication and washing with detergents. Both of these factors are essential for real-life applications, but what is especially useful is that our free-form composites could be used as-fabricated without encapsulation, which is typically required for conventional laser-scribed materials. We demonstrate the exceptional versatility of our new hybrid textiles by successfully recording muscle activity, heartbeat, and voice. We also show a gesture sensor and an electrothermal heater embedded within a single commercial glove. Additionally, the use of these textiles could be extended to personal protection equipment and smart clothes. We achieve this by implementing self-sterilization with light and laser-induced functionalization with silver nanoparticles, which results in multifunctional antibacterial textiles. Moreover, incorporating silver into such fabrics enables their use as surface-enhanced Raman spectroscopy sensors, allowing for the direct analysis of drugs and sweat components on the clothing itself. Our research offers valuable insights into simple and scalable processes of textile-based electronics, opening up new possibilities for paradigms like the Internet of Medical Things.

Synthesis and Characterization of Mithun (Bos frontalis) Urine-Based Antibacterial Copper Oxide Nanoparticles

The increased prevalence of disease, mortality, and antibiotic resistance among aquatic microorganisms has renewed interest in non-conventional disease prevention and control approaches. Nanoparticles present several benefits in aquaculture and hold significant potential for controlling both human and animal infections. This study reports on the antibacterial properties of green copper oxide nanoparticles (CuO NPs) synthesized from the urine of Mithun (MU) (Bos frontalis). In addition, an array of analytical techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-visible spectroscopy (UV), and Fourier transform infrared spectroscopy (FTIR), were employed to investigate the synthesized MU-CuO nanoparticles. Aeromonas hydrophila and Aeromonas veronii, two bacterial fish pathogens known to cause severe infectious diseases in fish, were tested for their antibacterial efficacy against MU-CuO NPs. At 100 µg/mL, MU-CuO NPs exhibit enhanced antibacterial efficacy against two bacterial pathogens commonly found in fish. Applications in aquaculture may be looked at given that MU-CuO NPs showed greater antibacterial activity.

Preparation of aromatic β-cyclodextrin nano/microcapsules and corresponding aromatic textiles: A review

Fragrance finishing of textiles is receiving substantial interest, with aromatherapy being one of the most popular aspects of personal health care. However, the longevity of aroma on textiles and presence after subsequent launderings are major concerns for aromatic textiles directly loaded with essential oils. These drawbacks can be weakened by incorporating essential oil-complexed β-cyclodextrins (β-CDs) onto various textiles. This article reviews various preparation methods of aromatic β-cyclodextrin nano/microcapsules, as well as a wide variety of methods for the preparation of aromatic textiles based on them before and after forming, proposing future trends in preparation processes. The review also covers the complexation of β-CDs with essential oils, and the application of aromatic textiles based on β-CD nano/microcapsules. Systematic research on the preparation of aromatic textiles facilitates the realization of green and simple industrialized large-scale production, providing needed application potential in the fields of various functional materials.

Cleaner pathway for developing bioactive textile materials using natural dyes: a review

Bioactive textile materials are a promising field in the development of functional textiles. The integration of bioactive compounds, such as natural dyes, into textiles offers a range of benefits, including UV protection, anti-microbial properties, and insect repellency. Natural dyes have been shown to have bioactivity, and their integration into textiles has been extensively studied. The application of natural dyes on textile substrates will be an advantage for their inherent functional properties along with their non-toxic and eco-friendly nature. This review addresses the effect of natural dyes on surface modification of most used natural and synthetic fibers and its subsequent effects on their anti-microbial, UV protection and insect repellent properties with natural dyes. Natural dyes have proved to be environmentally friendly in an attempt to improve bioactive functions in textile materials. This review provides a clear view of sustainable resources for the dyeing and finishing of textiles to develop a cleaner pathway of bioactive textiles using natural dyes. Furthermore, the dye source, advantages and disadvantages of natural dye, main dye component, and chemical structure are listed. However, there is still a need for interdisciplinary research to further optimize the integration of natural dyes into textiles and to improve their bioactivity, biocompatibility, and sustainability. The development of bioactive textile materials using natural dyes has the potential to revolutionize the textile industry and to provide a range of benefits to consumers and society.

Theranostic applications of selenium nanomedicines against lung cancer

The incidence and mortality rates of lung cancer are among the highest in the world. Traditional treatment methods include surgery, chemotherapy, and radiotherapy. Although rapid progress has been achieved in the past decade, treatment limitations remain. It is therefore imperative to identify safer and more effective therapeutic methods, and research is currently being conducted to identify more efficient and less harmful drugs. In recent years, the discovery of antitumor drugs based on the essential trace element selenium (Se) has provided good prospects for lung cancer treatments. In particular, compared to inorganic Se (Inorg-Se) and organic Se (Org-Se), Se nanomedicine (Se nanoparticles; SeNPs) shows much higher bioavailability and antioxidant activity and lower toxicity. SeNPs can also be used as a drug delivery carrier to better regulate protein and DNA biosynthesis and protein kinase C activity, thus playing a role in inhibiting cancer cell proliferation. SeNPs can also effectively activate antigen-presenting cells to stimulate cell immunity, exert regulatory effects on innate and regulatory immunity, and enhance lung cancer immunotherapy. This review summarizes the application of Se-based species and materials in lung cancer diagnosis, including fluorescence, MR, CT, photoacoustic imaging and other diagnostic methods, as well as treatments, including direct killing, radiosensitization, chemotherapeutic sensitization, photothermodynamics, and enhanced immunotherapy. In addition, the application prospects and challenges of Se-based drugs in lung cancer are examined, as well as their forecasted future clinical applications and sustainable development.

Evaluation of Mechanical Properties of Glass Ionomer Cements Reinforced with Synthesized Diopside Produced via Sol-Gel Method

This study aimed to fabricate a glass ionomer cement/diopside (GIC/DIO) nanocomposite to improve its mechanical properties for biomaterials applications. For this purpose, diopside was synthesized using a sol-gel method. Then, for preparing the nanocomposite, 2, 4, and 6 wt% diopside were added to a glass ionomer cement (GIC). Subsequently, X-ray diffraction (XRD), differential thermal analysis (DTA), scanning electron microscopy (SEM), and Fourier transform infrared spectrophotometry (FTIR) analyses were used to characterize the synthesized diopside. Furthermore, the compressive strength, microhardness, and fracture toughness of the fabricated nanocomposite were evaluated, and a fluoride-releasing test in artificial saliva was also applied. The highest concurrent enhancements of compressive strength (1155.7 MPa), microhardness (148 HV), and fracture toughness (5.189 MPa·m^1/2) were observed for the glass ionomer cement (GIC) with 4 wt% diopside nanocomposite. In addition, the results of the fluoride-releasing test showed that the amount of released fluoride from the prepared nanocomposite was slightly lower than the glass ionomer cement (GIC). Overall, the improvement in mechanical properties and optimal fluoride release of prepared nanocomposites can introduce suitable options for dental restorations under load and orthopedic implants.

Recent Developments in Materials and Manufacturing Techniques Used for Sports Textiles

In the recent era of development, the global market for the sportswear textile manufacturing industries has increased with the increase in consumption of active sportswear. The sportswear manufacturers not only focused on the market trends but also focused on material diversification with technology enhancement. The performance characteristics of active sportswear directly influence comfort level and athletic performance during sports activities. Different types of sportswear products require different performance characteristics. Appropriate moisture and heat management are the key factors for the endowment of the required physiological comfort level. In highly engineered textile-based sports goods, special characteristics are incorporated in the polymer/fibers/product manufacturing procedures/finishing techniques to obtain the maximum performance and comfort level. In this review paper current market trends, highly engineered polymers, fibers, fabrics, finishes, nanomaterials, and the recent developments in the manufacturing techniques of sportswear are illustrated.

Pigment Production of Chlamydomonas Strains in Response to Norflurazon and ZnO Nanoparticles

Numerous species of microalgae have been utilized for pigment production. More and more species are gaining popularity due to their ability to accumulate pigments with varying chemical compositions and the fact that some have distinctive byproducts that can be co-produced. Despite the fact that many of the species have unique by-products and traits, they are not being used economically due to high production costs. Utilizing agricultural and industrial wastewater for algae cultivation is one way to lower manufacturing costs. Herbicide-contaminated wastewater can result from agricultural contamination. Norflurazon is a popular pesticide frequently used for weed control. The presence of norflurazon in water renders that water unusable and requires proper treatment. Nanoparticles of ZnO (ZnO NPs), on the other hand, are utilized in a variety of industrial productions of numerous household goods. Water contaminated with ZnO NPs can present potential risks to human health and the environment. In this study, two field isolates of the green microalga Chlamydomonas reinhardtii, a widely used model organism, were examined for their reaction to these two compounds in order to assess the responses of different natural strains to environmental stresses. Norflurazon at 10 µM had a higher inhibitory effect on growth and pigment production than ZnO NPs at 200 mg L−1. Although both norflurazon and ZnO NPs inhibit cell growth and pigmentation, they do so through distinct processes. Norflurazon induces oxidative stress in cells, resulting in photosystem damage. ZnO nanoparticles, on the other hand, did not cause photosystem damage but rather mechanical cell damage and disintegration. In addition, the physiological responses of the two Chlamydomonas strains were distinct, supporting the utilization of natural algal strains for specific types of environmental pollutants.

Impact of textile dyes on health and ecosystem: a review of structure, causes, and potential solutions

The rapid growth of population and industrialization have intensified the problem of water pollution globally. To meet the challenge of industrialization, the use of synthetic dyes in the textile industry, dyeing and printing industry, tannery and paint industry, paper and pulp industry, cosmetic and food industry, dye manufacturing industry, and pharmaceutical industry has increased exponentially. Among these industries, the textile industry is prominent for the water pollution due to the hefty consumption of water and discharge of coloring materials in the effluent. The discharge of this effluent into the aquatic reservoir affects its biochemical oxygen demand (BOD), chemical oxygen demand (COD), total dissolved solids (TDS), total suspended solids (TSS), and pH. The release of the effluents without any remedial treatment will generate a gigantic peril to the aquatic ecosystem and human health. The ecological-friendly treatment of the dye-containing wastewater to minimize the detrimental effect on human health and the environment is the need of the hour. The purpose of this review is to evaluate the catastrophic effects of textile dyes on human health and the environment. This review provides a comprehensive insight into the dyes and chemicals used in the textile industry, focusing on the typical treatment processes for their removal from industrial wastewaters, including chemical, biological, physical, and hybrid techniques.

A Novel Approach for the Development of Low-Cost Polymeric Thin-Film Nanocomposite Membranes for the Biomacromolecule Separation

The separation of biomacromolecules, mainly proteins, plays a significant role in the pharmaceutical and food industries. Among the membranes' techniques, thin-film nanocomposite nanofiltration membranes are the best choice due to their high energy efficiency, excellent productivity, cost-effective and tuneable properties that have captured the attention of the efficient separation of biomacromolecules, especially from the industrial perspective. The present work directs the efficient separation study of proteins, namely, lysozyme, trypsin, pepsin, bovine serum albumin (BSA), and cephalexin, using a thin-film nanocomposite membrane integrated with Arg-MMT (arginine-montmorillonite) clay nanoparticles. The surface morphology and cross-section images of the TFN membranes were studied using a field emission scanning electron microscope (FE-SEM) and a high-resolution transmission electron microscope (HR-TEM). The thermal stability and hydrophilicity of the membranes were examined using thermogravimetric analysis (TGA) and contact angle, respectively. The surface chemistry of the selective layer has different functional groups that were analyzed using FTIR spectroscopy. The performance of the membranes was studied at different trans-membrane pressures and permeation times. The effect of monomer concentration on the separation performance of the membranes was also studied at different permeation times. The membranes' antibacterial activity was evaluated using the Muller-Hinton disk diffusion method using gram-negative Escherichia coli (E. coli) and gram-positive Staphylococcus aureus (S. aureus) bacteria. The highest rejection was achieved for BSA up to 98.92 ± 1%, and the highest permeation was obtained against lysozyme feed solution up to 26 L m^-2 h^-1 at 5 bar pressure. The membrane also illustrated excellent rejection of cephalexin antibiotics with a rejection of 98.17 ± 1.75% and a permeation flux of 26.14 L m^-2 h^-1. The antifouling study performed for the membranes exhibited a flux recovery ratio of 86.48%. The fabricated thin-film nanocomposite membrane demonstrated a good alternative for the separation of biomacromolecules and has the potential to be used in different sectors of industry, especially the pharmaceutical and food industry.

Direct contact-mediated non-viral gene therapy using thermo-sensitive hydrogel-coated dressings

Nanotechnologies are being increasingly applied as systems for peptide and nucleic acid macromolecule drug delivery. However systemic targeting of these, or efficient topical and localized delivery remains an issue. A controlled release system that can be patterned and locally administered such as topically to accessible tissue (skin, eye, intestine) would therefore be transformative in realizing the potential of such strategies. We previously developed a technology termed GAG-binding enhanced transduction (GET) to efficiently deliver a variety of cargoes intracellularly, using GAG-binding peptides to mediate cell targeting, and cell penetrating peptides (CPPs) to promote uptake. Herein we demonstrate that the GET transfection system can be used with the moisturizing thermo-reversible hydrogel Pluronic-F127 (PF127) and methyl cellulose (MC) to mediate site specific and effective intracellular transduction and gene delivery through GET nanoparticles (NPs). We investigated hydrogel formulation and the temperature dependence of delivery, optimizing the delivery system. GET-NPs retain their activity to enhance gene transfer within our formulations, with uptake transferred to cells in direct contact with the therapy-laden hydrogel. By using Azowipe™ material in a bandage approach, we were able to show for the first-time localized gene transfer in vitro on cell monolayers. The ability to simply control localization of gene delivery on millimetre scales using contact-mediated transfer from moisture-providing thermo-reversible hydrogels will facilitate new drug delivery methods. Importantly our technology to site-specifically deliver the activity of novel nanotechnologies and gene therapeutics could be transformative for future regenerative medicine.

Antibacterial Properties of Gold Nanoparticles in the Modification of Medical Implants: A Systematic Review

The widespread occurrence of bacterial infections and their increased resistance to antibiotics has led to the development of antimicrobial coatings for multiple medical implants. Owing to their desirable properties, gold nanoparticles (AuNPs) have been developed as antibacterial agents. This systematic investigation sought to analyze the antibacterial effects of implant material surfaces modified with AuNPs. The data from 27 relevant studies were summed up. The included articles were collected from September 2011 to September 2021. According to the retrieved literature, we found that medical implants modified by AuNPs have good antibacterial effects against gram-positive and gram-negative bacteria, and the antibacterial effects would be improved by near-infrared (NIR) radiation.

Medical and Dental Applications of Titania Nanoparticles: An Overview

Currently, titanium oxide (TiO₂) nanoparticles are successfully employed in human food, drugs, cosmetics, advanced medicine, and dentistry because of their non-cytotoxic, non-allergic, and bio-compatible nature when used in direct close contact with the human body. These NPs are the most versatile oxides as a result of their acceptable chemical stability, lower cost, strong oxidation properties, high refractive index, and enhanced aesthetics. These NPs are fabricated by conventional (physical and chemical) methods and the latest biological methods (biological, green, and biological derivatives), with their advantages and disadvantages in this epoch. The significance of TiO₂ NPs as a medical material includes drug delivery release, cancer therapy, orthopedic implants, biosensors, instruments, and devices, whereas their significance as a dental biomaterial involves dentifrices, oral antibacterial disinfectants, whitening agents, and adhesives. In addition, TiO₂ NPs play an important role in orthodontics (wires and brackets), endodontics (sealers and obturating materials), maxillofacial surgeries (implants and bone plates), prosthodontics (veneers, crowns, bridges, and acrylic resin dentures), and restorative dentistry (GIC and composites).

Occurrence and health implications of heavy metals in preschool children's clothing manufactured in four Asian regions

Clothing may be a potential contributor to body metal burden in children. However, available information on heavy metals in children's clothing is extremely limited and the associated health risks remain poorly understood. This study investigated the concentrations of Pb, Cd, Co, Zn, Cr, As, Cu and Ni in new preschool children's clothing manufactured in four Asian regions. The children's clothing had higher levels of Ni and Cr but lower levels of Pb and Cd in comparison to the concentrations reported in other textile products. The concentrations of Cd were higher in the black clothing than those in the white and color samples. The non-cotton samples contained higher Co concentrations. The Pb concentrations in the samples manufactured in China were significantly higher than those in the other three regions. We estimated the dermal exposure doses for these metals and calculated the associated risks. The results indicated that the health risks from exposure to these metals in the children's clothing were acceptable. However, more research is required to investigate heavy metals and the associated risks in child clothing due to the increasing complexity of their materials and manufacturing processes.

Enhancement of Antimicrobial and Dyeing Properties of Cellulosic Fabrics via Chitosan Nanoparticles

The primary goal of this study is to prepare chitosan nanoparticles (CSNPs) by the ionic gelation method via the treatment of chitosan (0.2 wt.%) with tripolyphosphate (0.2 wt.%) ultrasonically for 45 min. FT-IR spectroscopy and TEM images were used to characterize and validate CSNP production. Cellulosic materials with different concentrations of CSNPs have better antibacterial and colouring characteristics. The treated cellulosic fabrics were analyzed by FT-IR spectroscopy, SEM, and thermogravimetric analysis. Colourimetric data measurements expressed in K/S values were used to evaluate the impact of CSNPs on the dyeing affinity of cellulosic materials. In addition, antibacterial activity against bacteria and fungi was tested on the treated cellulosic fabrics. According to the K/S values, cellulosic textiles treated with CSNPs (0.3 wt.%) had a better affinity for acid dyeing. These textiles also offer better antibacterial properties and are more resistant to washing, light, and rubbing. A cytotoxicity study found that CSNPs give cellulosic materials antibacterial and acid dyeing properties, which is good for the environment.

Anti-Mold Protection of Textile Surfaces with Cold Plasma Produced Biocidal Nanocoatings

The permanent anti-mold protection of textile surfaces, particularly those utilized in the manufacture of outdoor sporting goods, is still an issue that requires cutting-edge solutions. This study attempts to obtain antifungal nanocoatings on four selected fabrics used in the production of high-mountain clothing and sleeping bags, and on PET foil as a model substrate, employing the cold plasma technique for this purpose. Three plasma treatment procedures were used to obtain such nanocoatings: plasma-activated graft copolymerization of a biocidal precursor, deposition of a thin-film matrix by plasma-activated graft copolymerization and anchoring biocidal molecules therein, and plasma polymerization of a biocidal precursor. The precursors used represented three important groups of antifungal agents: phenols, amines, and anchored compounds. SEM microscopy and FTIR-ATR spectrometry were used to characterize the produced nanocoatings. For testing antifungal properties, four species of common mold fungi were selected: A. niger, A. fumigatus, A. tenuissima, and P. chrysogenum. It was found that the relatively best nanocoating, both in terms of plasma process performance, durability, and anti-mold activity, is plasma polymerized 2-allylphenol. The obtained results confirm our belief that cold plasma technology is a great tool for modifying the surface of textiles to provide them with antifungal properties.

Mechanistic and recent updates in nano-bioremediation for developing green technology to alleviate agricultural contaminants

The rise in environmental pollutant levels in recent years is mostly attributable to anthropogenic activities such as industrial, agricultural and other activities. Additionally, these activities may produce excessive levels of dangerous toxicants such as heavy metals, organic pollutants including pesticide and herbicide chemicals, and sewage discharges from residential and commercial sources. With a focus on environmentally friendly, sustainable technology, new technologies such as combined process of nanotechnology and bioremediation are urgently needed to accelerate the cost-effective remediation process to alleviate toxic contaminants than the conventional remediation methods. Numerous studies have shown that nanoparticles possess special qualities including improved catalysis and adsorption as well as increased reactivity. Currently, microorganisms and their extracts are being used as promising, environmentally friendly catalysts for engineered nanomaterial. In the long term, this combination of both technologies called nano-bioremediation may significantly alter the field of environmental remediation since it is more intelligent, safe, environmentally friendly, economical and green. This review provides an overview of soil and water remediation techniques as well as the use of nano-bioremediation, which is made from various living organisms. Additionally, current developments related to the mechanism, model and kinetic studies for remediation of agricultural contaminants have been discussed.

Machine Learning for Evaluating the Cytotoxicity of Mixtures of Nano-TiO2 and Heavy Metals: QSAR Model Apply Random Forest Algorithm after Clustering Analysis

With the development and application of nanomaterials, their impact on the environment and organisms has attracted attention. As a common nanomaterial, nano-titanium dioxide (nano-TiO₂) has adsorption properties to heavy metals in the environment. Quantitative structure-activity relationship (QSAR) is often used to predict the cytotoxicity of a single substance. However, there is little research on the toxicity of interaction between nanomaterials and other substances. In this study, we exposed human renal cortex proximal tubule epithelial (HK-2) cells to mixtures of eight heavy metals with nano-TiO₂, measured absorbance values by CCK-8, and calculated cell viability. PLS and two ensemble learning algorithms are used to build multiple QSAR models for data sets, and the test set R² is increased from 0.38 to 0.78 and 0.85, and RMSE is decreased from 0.18 to 0.12 and 0.10. After selecting the better random forest algorithm, the K-means clustering algorithm is used to continue to optimize the model, increasing the test set R² to 0.95 and decreasing the RMSE to 0.08 and 0.06. As a reliable machine algorithm, random forest can be used to predict the toxicity of the mixture of nano-metal oxides and heavy metals. The cluster analysis can effectively improve the stability and predictability of the model, and provide a new idea for the prediction of cytotoxicity model in the future.