Glycerol as substrate for the production of biosurfactant by Pseudomonas aeruginosa UCP0992

Valorization of waste engine oil to mono- and di-rhamnolipid in a sustainable approach to circular bioeconomy

This study aims to valorize waste engine oil (WEO) for synthesizing economically viable biosurfactants (rhamnolipids) to strengthen the circular bioeconomy concept. It specifically focuses on investigating the influence of key bioprocess parameters, viz. agitation and aeration rates, on enhancing rhamnolipid yield in a fed-batch fermentation mode. The methodology involves conducting experiments in a stirred tank bioreactor (3 L) using Pseudomonas aeruginosa gi |KP 163922| as the test organism. Central composite design and response surface methodology (CCD-RSM) are employed to design the experiments and analyze the effects of agitation and aeration rates on various parameters, including dry cell biomass (DCBM), surface tension, tensoactivity, and rhamnolipid yield. It is also essential to determine the mechanistic pathway of biosurfactant production followed by the strain using complex hydrophobic substrates such as WEO. The study reveals that optimal agitation and aeration rates of 200 rpm and 1 Lpm result in the highest biosurfactant yield of 29.76 g/L with minimal surface tension (28 mN/m). Biosurfactant characterization using FTIR, 1H NMR, and UPLC-MS/MS confirm the presence of dominant molecular ion peaks m/z 543.9 and 675.1. This suggests that the biosurfactant is a mixture of mono- and di-rhamnolipids (RhaC10C10, RhaRhaC10C12:1, RhaRhaC12:1C10). The findings present a sustainable approach for biosurfactant production in a fed-batch bioreactor. This research opens the possibility of exploring the use of pilot or large-scale bioreactors for biosurfactant production in future investigations.

Production and characterization of rhamnolipids by Pseudomonas aeruginosa isolated in the Amazon region, and potential antiviral, antitumor, and antimicrobial activity

Biosurfactants encompass structurally and chemically diverse molecules with surface active properties, and a broad industrial deployment, including pharmaceuticals. The interest is growing mainly for the low toxicity, biodegradability, and production from renewable sources. In this work, the optimized biosurfactant production by Pseudomonas aeruginosa BM02, isolated from the soil of a mining area in the Brazilian Amazon region was assessed, in addition to its antiviral, antitumor, and antimicrobial activities. The optimal conditions for biosurfactant production were determined using a factorial design, which showed the best yield (2.28 mg/mL) at 25 °C, pH 5, and 1% glycerol. The biosurfactant obtained was characterized as a mixture of rhamnolipids with virucidal properties against Herpes Simplex Virus, Coronavirus, and Respiratory Syncytial Virus, in addition to antimicrobial properties against Gram-positive bacteria (Staphylococcus aureus and Enterococcus faecium), at 50 µg/mL. The antitumor activity of BS (12.5 µg/mL) was also demonstrated, with potential selectivity in reducing the proliferation of breast tumor cells, after 1 min of exposure. These results demonstrate the importance of studying the interconnection between cultivation conditions and properties of industrially important compounds, such as rhamnolipid-type biosurfactant from P. aeruginosa BM02, a promising and sustainable alternative in the development of new antiviral, antitumor, and antimicrobial prototypes.

Impact of biosurfactant produced by Bacillus spp. on biodegradation efficiency of crude oil and anthracene

Biosurfactants are surface active molecules generated by various microorganisms, including bacteria, actinobacteria, algae, and fungi. In this study, bacterial strains are isolated from soil contaminated with used motor oil and examined for potential biosurfactant production. A minimum salt medium (MSM), with crude oil as the only carbon source, is used to isolate potential biosurfactant-producing bacterial strains. About 23 strains are isolated, and all are subjected to the primary screening methods for biosurfactant production. Based on the emulsification index, oil displacement, and drop collapse screening methods, two isolates with potential biosurfactant-producing ability are selected for further studies. The synthesis of biosurfactants, crude oil and anthracene biodegradation is carried out with strains DTS1 and DTS2. Both strains show significant outcomes in crude oil degradation. In addition, both strains can utilize anthracene as the sole carbon source. During the degradation course, changes in the growth conditions are continuously monitored by measuring turbidity and pH. In this degradation study, the biosurfactant production aptitude of the isolated strains plays an essential role in increasing the bioavailability of hydrophobic hydrocarbons. These strains are identified down to the molecular level by employing 16S rRNA gene sequencing, and the acquired sequences are submitted to get the accession numbers. These prospective strains can be utilized to remediate hydrocarbon-contaminated environments.

Microbial Biosurfactant: Candida bombicola as a Potential Remediator of Environments Contaminated by Heavy Metals

Industrial interest in surfactants of microbial origin has intensified recently due to the characteristics of these compounds, such as biodegradability and reduced toxicity, and their efficiency in removing heavy metals and hydrophobic organic compounds from soils and waters. The aim of this study was to produce a biosurfactant using Candida bombicola URM 3712 in a low-cost medium containing 5.0% molasses, 3.0% corn steep liquor and 2.5% residual frying oil for 144 h at 200 rmp. Measurements of engine oil tension and emulsification were made under extreme conditions of temperature (0 °C, 5 °C, 70 °C, 100 °C and 120 °C), pH (2-12) and NaCl concentrations (2-12), demonstrating the stability of the biosurfactant. The isolated biosurfactant was characterized as an anionic molecule with the ability to reduce the surface tension of water from 72 to 29 mN/m, with a critical micellar concentration of 0.5%. The biosurfactant had no toxic effect on vegetable seeds or on Eisenia fetida as a bioindicator. Applications in the removal of heavy metals from contaminated soils under dynamic conditions demonstrated the potential of the crude and isolated biosurfactant in the removal of Fe, Zn and Pb with percentages between 70 and 88%, with the highest removal of Pb being 48%. The highest percentage of removal was obtained using the cell-free metabolic liquid, which was able to remove 48, 71 and 88% of lead, zinc and iron from the soil, respectively. Tests in packed columns also confirmed the biosurfactant's ability to remove Fe, Zn and Pb between 40 and 65%. The removal kinetics demonstrated an increasing percentage, reaching removal of 50, 70 and 85% for Pb, Zn and Fe, respectively, reaching a greater removal efficiency at the end of 24 h. The biosurfactant was also able to significantly reduce the electrical conductivity of solutions containing heavy metals. The biosurfactant produced by Candida bombicola has potential as an adjuvant in industrial processes for remediating soils and effluents polluted by inorganic contaminants.

Biosurfactant: an emerging tool for the petroleum industries

The petroleum sector is essential to supplying the world's energy demand, but it also involves numerous environmental problems, such as soil pollution and oil spills. The review explores biosurfactants' potential as a new tool for the petroleum sector. Comparing biosurfactants to their chemical equivalents reveals several advantages. They are ecologically sustainable solutions since they are renewable, nontoxic, and biodegradable. Biosurfactants are used in a variety of ways in the petroleum sector. They can improve the mobilization and extraction of trapped hydrocarbons during oil recovery procedures. By encouraging the dispersion and solubilization of hydrocarbons, biosurfactants also assist in the cleanup of oil spills and polluted locations by accelerating their breakdown by local microorganisms. The review gives insights into alternative methods for the petroleum industry that are more viable and cost-effective.

Production and characterization of lipopeptide biosurfactant from a new strain of Pseudomonas antarctica 28E using crude glycerol as a carbon source

Pseudomonas is a cosmopolitan genus of bacteria found in soil, water, organic matter, plants and animals and known for the production of glycolipid and lipopeptide biosurfactants. In this study bacteria (laboratory collection number 28E) isolated from soil collected in Spitsbergen were used for biosurfactant production. 16S rRNA sequencing and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF) revealed that this isolate belongs to the species Pseudomonas antarctica. In the present study, crude glycerol, a raw material obtained from several industrial processes, was evaluated as a potential low-cost carbon source to reduce the costs of lipopeptide production. Among several tested glycerols, a waste product of stearin production, rich in nitrogen, iron and calcium, ensured optimal conditions for bacterial growth. Biosurfactant production was evidenced by a reduction of surface tension (ST) and an increase in the emulsification index (E24%). According to Fourier-transform infrared spectroscopy (FTIR) and electrospray ionization mass spectrometry (ESI-MS), the biosurfactant was identified as viscosin. The critical micelle concentration (CMC) of lipopeptide was determined to be 20 mg L-1. Interestingly, viscosin production has been reported previously for Pseudomonas viscosa, Pseudomonas fluorescens and Pseudomonas libanensis. To the best of our knowledge, this is the first report on viscosin production by a P. antarctica 28E. The results indicated the potential of crude glycerol as a low-cost substrate to produce a lipopeptide biosurfactant with promising tensioactive and emulsifying properties.

Characterization of pumilacidin, a lipopeptide biosurfactant produced from Bacillus pumilus NITDID1 and its prospect in bioremediation of hazardous pollutants

Highly hydrophobic compounds like petroleum and their byproducts, once released into the environment, can persist indefinitely by virtue of their ability to resist microbial degradation, ultimately paving the path to severe environmental pollution. Likewise, the accumulation of toxic heavy metals like lead, cadmium, chromium, etc., in the surroundings poses an alarming threat to various living organisms. To remediate the matter in question, the applicability of a biosurfactant produced from the mangrove bacterium Bacillus pumilus NITDID1 (Accession No. KY678446.1) is reported here. The structural characterization of the produced biosurfactant revealed it to be a lipopeptide and has been identified as pumilacidin through FTIR, NMR, and MALDI-TOF MS. The critical micelle concentration of pumilacidin was 120 mg/L, and it showed a wide range of stability in surface tension reduction experiments under various environmental conditions and exhibited a high emulsification index of as much as 90%. In a simulated setup of engine oil-contaminated sand, considerable oil recovery (39.78%) by this biosurfactant was observed, and upon being added to a microbial consortium, there was an appreciable enhancement in the degradation of the used engine oil. As far as the heavy metal removal potential of biosurfactant is concerned, as much as 100% and 82% removal was observed for lead and cadmium, respectively. Thus, in a nutshell, the pumilacidin produced from Bacillus pumilus NITDID1 holds promise for multifaceted applications in the field of environmental remediation.

Production, characterization, and kinetic modeling of biosurfactant synthesis by Pseudomonas aeruginosa gi |KP 163922|: a mechanism perspective

Kinetic studies and modeling of production parameters are essential for developing economical biosurfactant production processes. This study will provide a perspective on mechanistic reaction pathways to metabolize Waste Engine Oil (WEO). The results will provide relevant information on (i) WEO concentration above which growth inhibition occurs, (ii) chemical changes in WEO during biodegradation, and (iii) understanding of growth kinetics for the strain utilizing complex substrates. Laboratory scale experiments were conducted to study the kinetics and biodegradation potential of the strain Pseudomonas aeruginosa gi |KP 163922| over a range (0.5-8% (v/v)) of initial WEO concentration for 168 h. The kinetic models, such as Monod, Powell, Edward, Luong, and Haldane, were evaluated by fitting the experimental results in respective model equations. An unprecedented characterization of the substrate before and after degradation is presented, along with biosurfactant characterization. The secretion of biosurfactant during the growth, validated by surface tension reduction (72.07 ± 1.14 to 29.32 ± 1.08 mN/m), facilitated the biodegradation of WEO to less harmful components. The strain showed an increase in maximum specific growth rate (µ_max) from 0.0185 to 0.1415 h^-1 upto 49.92 mg/L WEO concentration. Maximum WEO degradation was found to be ~ 94% gravimetrically. The Luong model (adj. R² = 0.97) adapted the experimental data using a non-linear regression method. Biochemical, ¹H NMR, and FTIR analysis of the produced biosurfactant revealed a mixture of mono- and di- rhamnolipid. The degradation compounds in WEO were identified using FTIR, ¹H NMR, and GC-MS analysis to deduce the mechanism.

Enhanced remediation of oil-contaminated intertidal sediment by bacterial consortium of petroleum degraders and biosurfactant producers

Oil pollution in intertidal zones is an important environmental issue that has serious adverse effects on coastal ecosystems. This study investigated the efficacy of a bacterial consortium constructed from petroleum degraders and biosurfactant producers in the bioremediation of oil-polluted sediment. Inoculation of the constructed consortium significantly enhanced the removal of C₈-C₄₀n-alkanes (80.2 ± 2.8% removal efficiency) and aromatic compounds (34.4 ± 10.8% removal efficiency) within 10 weeks. The consortium played dual functions of petroleum degradation and biosurfactant production, greatly improving microbial growth and metabolic activities. Real-time quantitative polymerase chain reaction (PCR) showed that the consortium markedly increased the proportions of indigenous alkane-degrading populations (up to 3.88-times higher than that of the control treatment). Microbial community analysis demonstrated that the exogenous consortium activated the degradation functions of indigenous microflora and promoted synergistic cooperation among microorganisms. Our findings indicated that supplementation of a bacterial consortium of petroleum degraders and biosurfactant producers is a promising bioremediation strategy for oil-polluted sediments.

Treatment of Motor Oil-Contaminated Soil with Green Surfactant Using a Mobile Remediation System

Leak of fuels and lubricants occurring during exploration, distribution, refining and storage operations is the major cause of environmental pollution due to petroderivatives dispersion. The quick use of a series of physicochemical and biological techniques is needed to drastically reduce the magnitude of damage provoked by these pollutants. Among them, soil washing proved to be an effective alternative to the remediation of hydrocarbon-polluted sites, mainly if combined with surfactant utilization. However, the direct use of surfactants can lead to problems related to the toxicity and dispersion of the resulting by-products, as the majority of marketed surfactants are produced from oil derivatives. In this context, green surfactants appear as a promising alternative to their synthetic counterpart. In the present study, two green surfactants, i.e., a chemically synthesized biobased surfactant and a Starmerella bombicola biosurfactant, were applied in soil decontamination tests using a concrete mixer-type Mobile Soil Remediation System (MSRS). The system was designed and developed with 3D printing based on bench-scale results. A commercial biosurfactant was formulated based on the microbial surfactant, which was compared with the biobased surfactant in various experimental conditions. A set of factorial designs combined with Response Surface Methodology was used to select the optimal conditions for pollutant removal using the prototype. The following variables were tested: Surfactant type, Surfactant volume, Surfactant dilution, Contaminant concentration, Soil type, Soil mass, Washing duration, Tank tilt angle, Mixing speed, and Type of basket. Under the optimized experimental condition, the commercial biosurfactant allowed to remove 92.4% of the motor oil adsorbed in the sand. These results demonstrate the possibility of using natural surfactants and the development of novel mechanical technologies to degrade hydrocarbons with economic earnings for oil industry.

Removal of Nutrients from Water Using Biosurfactant Micellar-Enhanced Ultrafiltration

The removal of NH₄⁺, NO₃^-, and NH₃^- from wastewater can be difficult and expensive. Through physical, chemical, and biological processes, metals and nutrients can be extracted from wastewater. Very few scientific investigations have employed surfactants with high biodegradability, low toxicity, and suitability for ion removal from wastewater at different pH and salinity levels. This research employed a highly biodegradable biosurfactant generated from yeast (sophorolipid) through micellar-enhanced ultrafiltration (MEUF). MEUF improves nutrient removal efficiency and reduces costs by using less pressure than reverse osmosis (RO) and nanofiltration (NF). The biosurfactant can be recovered after the removal of nutrient- and ion-containing micelles from the filtration membrane. During the experiment, numerous variables, including temperature, pH, biosurfactant concentration, pollutant ions, etc., were evaluated. The highest amount of PO₄^3- was eliminated at a pH of 6.0, which was reported at 94.9%. Maximum NO₃^- removal occurred at 45.0 °C (96.9%), while maximum NH₄⁺ removal occurred at 25.0 mg/L (94.5%). Increasing TMP to 200 kPa produced the maximum membrane flow of 226 L/h/m². The concentrations of the contaminating ion and sophorolipid were insignificant in the permeate, demonstrating the high potential of this approach.

Emulsifying Properties of Rhamnolipids and Their In Vitro Antifungal Activity against Plant Pathogenic Fungi

Rhamnolipids have significant emulsifying activity and the potential to become a component of pesticide emulsifier. Rhamnolipids are usually composed of two main components: mono-rhamnolipids (Rha-C10-C10) and di-rhamnolipids (Rha2-C10-C10). The proportion of di-rhamnolipids in the products ranged between 15% and 90%, affected by the production strains and fermentation process. In this paper, three kinds of rhamnolipid products containing di-rhamnolipids proportions, of 25.45, 46.46 and 89.52%, were used to test their emulsifying ability toward three conventional solvents used in pesticide (S-200, xylene, cyclohexanone) and antifungal activities against five strains of plant pathogenic fungi (Phytophthora capsici, Phytophthora parasitica var.nicotianae, Colletotrichum destructivum, Colletotrichum sublineolum, Fusarium oxysporum). The results indicated that although the CMC of the three rhamnolipids were significantly different, their emulsification properties had no remarkable differences, at a concentration of 10 g/L. However, their antifungal activities were significantly different: the more di-rhamnolipids, the stronger the antifungal activity. This work helps to promote the application of rhamnolipids as pesticides adjuvants.

A review on biosurfactant producing bacteria for remediation of petroleum contaminated soils

The discharge of potentially toxic petroleum hydrocarbons into the environment has been a matter of concern, as these organic pollutants accumulate in many ecosystems due to their hydrophobicity and low bioavailability. Petroleum hydrocarbons are neurotoxic and carcinogenic organic pollutants, extremely harmful to human and environmental health. Traditional treatment methods for removing hydrocarbons from polluted areas, including various mechanical and chemical strategies, are ineffective and costly. However, many indigenous microorganisms in soil and water can utilise hydrocarbon compounds as sources of carbon and energy and hence, can be employed to degrade hydrocarbon contaminants. Therefore, bioremediation using bacteria that degrade petroleum hydrocarbons is commonly viewed as an environmentally acceptable and effective method. The efficacy of bioremediation can be boosted further by using potential biosurfactant-producing microorganisms, as biosurfactants reduce surface tension, promote emulsification and micelle formation, making hydrocarbons bio-available for microbial breakdown. Further, introducing nanoparticles can improve the solubility of hydrophobic hydrocarbons as well as microbial synthesis of biosurfactants, hence establishing a favourable environment for microbial breakdown of these chemicals. The review provides insights into the role of microbes in the bioremediation of soils contaminated with petroleum hydrocarbons and emphasises the significance of biosurfactants and potential biosurfactant-producing bacteria. The review partly focusses on how nanotechnology is being employed in different critical bioremediation processes.

Bioreactor-scale production of rhamnolipids from food waste digestate and its recirculation into anaerobic digestion for enhanced process performance: Creating closed-loop integrated biorefinery framework

Reaching industrially relevant productivities in bioprocesses and their efficient integration in the existing industrial infrastructure remain as important challenges in the circular economy to create closed loop sustainability framework. Using anaerobic digestion (AD) biorefinery as a model, the present work addressed these problems via integration of next-generation rhamnolipids production with AD. A high rhamnolipids concentration of 10.25 ± 1.34 g/L was obtained by fed-batch fermentation using food waste digestate as medium. Digestate-derived rhamnolipids contained Rha-C₁₀-C₁₀ and Rha-Rha-C₁₀-C₁₀ as the predominant congeners. These were used back in single-phase AD to demonstrate their effect on sludge solubilization and digestion efficiency. A dosage of 0.02 g rhamnolipids/g total suspended solids was found to be optimal which enhanced the hydrolysis-acidogenesis reactions to up to 27% over control. It however retarded methane production which could be overcome by the prolongation of digestion time. Finally, the value chain appreciation by the proposed process was demonstrated by a feasibility analysis.

A Biosurfactant from Candida bombicola: Its Synthesis, Characterization, and its Application as a Food Emulsions

The present study aimed to produce a biosurfactant from Candida yeast cultivated in a low-cost medium made of sugar-cane molasses (5%), frying oil waste (5%), and corn steep liquor (5%). Initially, the production at the flask-scale was investigated and then scaled up in bioreactors to 1.2, 3.0, and 50 L to simulate a real production scale. The products obtained an excellent reduction in surface tensions from 70 to 29 mN·m⁻¹ in the flask-scale, comparable to 33 mN·m⁻¹ in the 1.2-L reactor, to 31 mN·m⁻¹ in the 3-L reactor, and to 30 mN·m⁻¹ in the 50-L reactor. Regarding the yield, it was observed that the isolation by liquid-to-liquid extraction aided biosurfactant production up to 221.9 g·L⁻¹ with a critical micellar concentration of 0.5%. The isolated biosurfactant did not exhibit an inhibitory effect on the germination of vegetable seeds and presented no significant acute toxicity in assays with Artemia salina and Allium cepa. Among the different formulations of mayonnaise-like sauces, the most stable formula was observed with the addition of the biosurfactant at a concentration of 0.5% and the greatest results were associated with the guar and carboxymethyl cellulose gums. Thus, the biosurfactant from C. bombicola represents a promising alternative as a food additive in emulsions.

Review on classification, physicochemical properties and applications of microbial surfactants

Biosurfactants are amphiphilic microbial compounds synthesized from plants and micro organisms that have both hydrophilic and hydrophobic zones, which are classified into liquid-liquid, liquid-solid and liquid-gas interfaces. Due to their versatile nature, low toxicity, and high reactivity at extreme temperatures, as well as – extremely important – their good biodegradability and environmental compatibility, biobased surfactants provide approaches for use in many environmental industries. Biosurfactants produced by microorganisms have potential applications in bioremediation as well as in the petroleum, agricultural, food, cosmetics and pharmaceutical industries. In this review article, we include a detailed overview of the knowledge obtained over the years, such as factors influencing bio-surfactant production and developments in the incorporation of biomolecules in different industries and future research needs.

Plant Growth-Promoting Activity of Pseudomonas aeruginosa FG106 and Its Ability to Act as a Biocontrol Agent against Potato, Tomato and Taro Pathogens

P. aeruginosa strain FG106 was isolated from the rhizosphere of tomato plants and identified through morphological analysis, 16S rRNA gene sequencing, and whole-genome sequencing. In vitro and in vivo experiments demonstrated that this strain could control several pathogens on tomato, potato, taro, and strawberry. Volatile and non-volatile metabolites produced by the strain are known to adversely affect the tested pathogens. FG106 showed clear antagonism against Alternaria alternata, Botrytis cinerea, Clavibacter michiganensis subsp. michiganensis, Phytophthora colocasiae, P. infestans, Rhizoctonia solani, and Xanthomonas euvesicatoria pv. perforans. FG106 produced proteases and lipases while also inducing high phosphate solubilization, producing siderophores, ammonia, indole acetic acid (IAA), and hydrogen cyanide (HCN) and forming biofilms that promote plant growth and facilitate biocontrol. Genome mining approaches showed that this strain harbors genes related to biocontrol and growth promotion. These results suggest that this bacterial strain provides good protection against pathogens of several agriculturally important plants via direct and indirect modes of action and could thus be a valuable bio-control agent.

Optimization and characterization of biosurfactant produced by indigenous Brevibacillus borstelensis isolated from a low permeability reservoir for application in MEOR

Biosurfactants are expected to be a key factor for microbial enhanced oil recovery (MEOR). In this study, we described the novel biosurfactant-producing strain Brevibacillus borstelensis YZ-2 isolated from a low permeability oil reservoir. We purified and characterized the biosurfactants produced by this YZ-2 strain via thin-layer chromatography and MALDI-TOF-MS, revealing them to be fengycins. We additionally used a Box–Behnken design approach to optimize fermentation conditions in order to maximize the biosurfactants production. Core flooding experiments showed that biosurfactants produced by YZ-2 can significantly enhance crude oil recovery. Micro-model tests showed that emulsification and IFT reduction was the main EOR mechanism of the YZ biosurfactant in the oil wet model. In summary, these findings highlight the potential of Brevibacillus borstelensis YZ-2 and its metabolites for MEOR.

Biosurfactants are expected to be a key factor for microbial enhanced oil recovery (MEOR).

Characterization and Cytotoxicity of Pseudomonas Mediated Rhamnolipids Against Breast Cancer MDA-MB-231 Cell Line

A biosurfactant producing bacterium was identified as Pseudomonas aeruginosa DNM50 based on molecular characterization (NCBI accession no. MK351591). Structural characterization using MALDI-TOF revealed the presence of 12 different congeners of rhamnolipid such as Rha-C8-C8:1, Rha-C10-C8:1, Rha-C10-C10, Rha-C10-C12:1, Rha-C16:1, Rha-C16, Rha-C17:1, Rha-Rha-C10:1-C10:1, Rha-Rha-C10-C12, Rha-Rha-C10-C8, Rha-Rha-C10-C8:1, and Rha-Rha-C8-C8. The radical scavenging activity of rhamnolipid (DNM50RL) was determined by 2, 3-diphenyl-1-picrylhydrazyl (DPPH) assay which showed an IC₅₀ value of 101.8 μg/ ml. The cytotoxic activity was investigated against MDA-MB-231 breast cancer cell line by MTT (4,5-dimethylthiazol-2-yl-2,5-diphenyl tetrazolium bromide) assay which showed a very low IC50 of 0.05 μg/ ml at 72 h of treatment. Further, its activity was confirmed by resazurin and trypan blue assay with IC₅₀ values of 0.01 μg/ml and 0.64 μg/ ml at 72 h of treatment, respectively. Thus, the DNM50RL would play a vital role in the treatment of breast cancer targeting inhibition of p38MAPK.

Low-cost production and application of lipopeptide for bioremediation and plant growth by Bacillus subtilis SNW3

At present time, every nation is absolutely concern about increasing agricultural production and bioremediation of petroleum-contaminated soil. Hence, with this intention in the current study potent natural surfactants characterized as lipopeptides were evaluated for low-cost production by Bacillus subtilis SNW3, previously isolated from the Fimkessar oil field, Chakwal Pakistan. The significant results were obtained by using substrates in combination (white beans powder (6% w/v) + waste frying oil (1.5% w/v) and (0.1% w/v) urea) with lipopeptides yield of about 1.17 g/L contributing 99% reduction in cost required for medium preparation. To the best of our knowledge, no single report is presently describing lipopeptide production by Bacillus subtilis using white beans powder as a culture medium. Additionally, produced lipopeptides display great physicochemical properties of surface tension reduction value (SFT = 28.8 mN/m), significant oil displacement activity (ODA = 4.9 cm), excessive emulsification ability (E24 = 69.8%), and attains critical micelle concentration (CMC) value at 0.58 mg/mL. Furthermore, biosurfactants produced exhibit excellent stability over an extensive range of pH (1-11), salinity (1-8%), temperature (20-121°C), and even after autoclaving. Subsequently, produced lipopeptides are proved suitable for bioremediation of crude oil (86%) and as potent plant growth-promoting agent that significantly (P < 0.05) increase seed germination and plant growth promotion of chili pepper, lettuce, tomato, and pea maximum at a concentration of (0.7 g/100 mL), showed as a potential agent for agriculture and bioremediation processes by lowering economic and environmental stress.

Removal of heavy oil from contaminated surfaces with a detergent formulation containing biosurfactants produced by Pseudomonas spp

Industrial plants powered by heavy oil routinely experience problems with leaks in different parts of the system, such as during oil transport, the lubrication of equipment and mechanical failures. The surfactants, degreasing agents and solvents that make up detergents commonly used for cleaning grease-covered surfaces are synthetic, non-biodegradable and toxic, posing risks to the environment as well as the health of workers involved in the cleaning process. To address this problem, surfactant agents of a biodegradable nature and low toxicity, such as microbial surfactants, have been widely studied as an attractive, efficient solution to replace chemical surfactants in decontamination processes. In this work, the bacterial strains Pseudomonas cepacia CCT 6659, Pseudomonas aeruginosa UCP 0992, Pseudomonas aeruginosa ATCC 9027 and Pseudomonas aeruginosa ATCC 10145 were evaluated as biosurfactant producers in media containing different combinations and types of substrates and under different culture conditions. The biosurfactant produced by P. aeruginosa ATCC 10145 cultivated in a mineral medium composed of 5.0% glycerol and 2.0% glucose for 96 h was selected to formulate a biodetergent capable of removing heavy oil. The biosurfactant was able to reduce the surface tension of the medium to 26.40 mN/m, with a yield of approximately 12.00 g/L and a critical micelle concentration of 60.00 mg/L. The biosurfactant emulsified 97.40% and dispersed 98.00% of the motor oil. The detergent formulated with the biosurfactant also exhibited low toxicity in tests involving the microcrustacean Artemia salina and seeds of the vegetable Brassica oleracea. The detergent was compared to commercial formulations and removed 100% of the Special B1 Fuel Oil (OCB1) from different contaminated surfaces, demonstrating potential as a novel green remover with industrial applications.

Dining in Blue Light Impairs the Appetite of Some Leaf Epiphytes

Background: The phyllosphere is subjected to fluctuating abiotic conditions. This study examined the phenotypic plasticity (PP) of four selected non-phototrophic phyllosphere bacteria [control strain: Pseudomonas sp. DR 5-09; Pseudomonas agarici, Bacillus thuringiensis serovar israeliensis (Bti), and Streptomyces griseoviridis (SG)] regarding their respiration patterns and surfactant activity as affected by light spectrum and nutrient supply.

Methods: The PP of the strains was examined under four light regimes [darkness (control); monochromatic light-emitting diodes (LED) at 460 nm (blue) and 660 nm (red); continuously polychromatic white LEDs], in the presence of 379 substrates and conditions.

Results: Light treatment affected the studied bacterial strains regarding substrate utilization (Pseudomonas strains > SG > Bti). Blue LEDs provoked the most pronounced impact on the phenotypic reaction norms of the Pseudomonas strains and Bti. The two Gram-positive strains Bti and SG, respectively, revealed inconsistent biosurfactant formation in all cases. Biosurfactant formation by both Pseudomonas strains was supported by most substrates incubated in darkness, and blue LED exposure altered the surface activity profoundly. Blue and white LEDs enhanced biofilm formation in PA in highly utilized C-sources. Putative blue light receptor proteins were found in both Pseudomonas strains, showing 91% similarity with the sequence from NCBI accession number WP_064119393.

Conclusion: Light quality–nutrient interactions affect biosurfactant activity and biofilm formation of some non-phototrophic phyllosphere bacteria and are, thus, crucial for dynamics of the phyllosphere microbiome.

Application of Green Surfactants in the Remediation of Soils Contaminated by Hydrocarbons

Among the innovative technologies utilized for the treatment of contaminated soils, the use of green surfactants appears to be a biocompatible, efficient, and attractive alternative, since the cleaning processes that normally use synthetic surfactants as additives cause other problems due to toxicity and the accumulation of by-products. Three green surfactants, i.e., two biobased (biobased 1 and biobased 2) surfactants produced by chemical synthesis and a microbial surfactant produced from the yeast Starmerella bombicola ATCC 22214, were used as soil remediation agents and compared to a synthetic surfactant (Tween 80). The three surfactants were tested for their ability to emulsify, disperse, and remove different hydrophobic contaminants. The biosurfactant, which was able to reduce the water surface tension to 32.30 mN/m at a critical micelle concentration of 0.65 g/L, was then used to prepare a commercial formulation that showed lower toxicity to the tested environmental bioindicators and lower dispersion capacity than the biobased surfactants. All the green surfactants showed great emulsification capacity, especially against motor oil and petroleum. Therefore, their potential to remove motor oil adsorbed on different types of soils (sandy, silty, and clay soil and beach sand) was investigated either in kinetic (flasks) or static (packed columns) experiments. The commercial biosurfactant formulation showed excellent effectiveness in removing motor oil, especially from contaminated sandy soil (80.0 ± 0.46%) and beach sand (65.0 ± 0.14%) under static conditions, while, in the kinetic experiments, the commercial biosurfactant and the biobased 2 surfactant were able to remove motor oil from all the contaminated soils tested more effectively than the biobased 1 surfactant. Finally, the S. bombicola commercial biosurfactant was evaluated as a soil bioremediation agent. In degradation experiments carried out on motor oil-contaminated soils enriched with sugarcane molasses, oil degradation yield in the sandy soil reached almost 90% after 60 days in the presence of the commercial biosurfactant, while it did not exceed 20% in the presence of only S. bombicola cells. These results promise to contribute to the development of green technologies for the treatment of hydrophobic pollutants with economic gains for the oil industries.

Microbial Biosurfactant: A New Frontier for Sustainable Agriculture and Pharmaceutical Industries

In the current scenario of changing climatic conditions and the rising global population, there is an urgent need to explore novel, efficient, and economical natural products for the benefit of humankind. Biosurfactants are one of the latest explored microbial synthesized biomolecules that have been used in numerous fields, including agriculture, pharmaceuticals, cosmetics, food processing, and environment-cleaning industries, as a source of raw materials, for the lubrication, wetting, foaming, emulsions formulations, and as stabilizing dispersions. The amphiphilic nature of biosurfactants have shown to be a great advantage, distributing themselves into two immiscible surfaces by reducing the interfacial surface tension and increasing the solubility of hydrophobic compounds. Furthermore, their eco-friendly nature, low or even no toxic nature, durability at higher temperatures, and ability to withstand a wide range of pH fluctuations make microbial surfactants preferable compared to their chemical counterparts. Additionally, biosurfactants can obviate the oxidation flow by eliciting antioxidant properties, antimicrobial and anticancer activities, and drug delivery systems, further broadening their applicability in the food and pharmaceutical industries. Nowadays, biosurfactants have been broadly utilized to improve the soil quality by improving the concentration of trace elements and have either been mixed with pesticides or applied singly on the plant surfaces for plant disease management. In the present review, we summarize the latest research on microbial synthesized biosurfactant compounds, the limiting factors of biosurfactant production, their application in improving soil quality and plant disease management, and their use as antioxidant or antimicrobial compounds in the pharmaceutical industries.

Combining OSMAC Approach and Untargeted Metabolomics for the Identification of New Glycolipids with Potent Antiviral Activity Produced by a Marine Rhodococcus

Natural products of microbial origin have inspired most of the commercial pharmaceuticals, especially those from Actinobacteria. However, the redundancy of molecules in the discovery process represents a serious issue. The untargeted approach, One Strain Many Compounds (OSMAC), is one of the most promising strategies to induce the expression of silent genes, especially when combined with genome mining and advanced metabolomics analysis. In this work, the whole genome of the marine isolate Rhodococcus sp. I2R was sequenced and analyzed by antiSMASH for the identification of biosynthetic gene clusters. The strain was cultivated in 22 different growth media and the generated extracts were subjected to metabolomic analysis and functional screening. Notably, only a single growth condition induced the production of unique compounds, which were partially purified and structurally characterized by liquid chromatography high-resolution tandem mass spectrometry (LC-HRMS/MS). This strategy led to identifying a bioactive fraction containing >30 new glycolipids holding unusual functional groups. The active fraction showed a potent antiviral effect against enveloped viruses, such as herpes simplex virus and human coronaviruses, and high antiproliferative activity in PC3 prostate cancer cell line. The identified compounds belong to the biosurfactants class, amphiphilic molecules, which play a crucial role in the biotech and biomedical industry.

Fungal biosurfactants, from nature to biotechnological product: bioprospection, production and potential applications

Biosurfactants are in demand by the global market as natural commodities that can be added to commercial products or use in environmental applications. These biomolecules reduce the surface/interfacial tension between fluid phases and exhibit superior stability to chemical surfactants under different physico-chemical conditions. Biotechnological production of biosurfactants is still emerging. Fungi are promising producers of these molecules with unique chemical structures, such as sophorolipids, mannosylerythritol lipids, cellobiose lipids, xylolipids, polyol lipids and hydrophobins. In this review, we aimed to contextualize concepts related to fungal biosurfactant production and its application in industry and the environment. Concepts related to the thermodynamic and physico-chemical properties of biosurfactants are presented, which allows detailed analysis of their structural and application. Promising niches for isolating biosurfactant-producing fungi are presented, as well as screening methodologies are discussed. Finally, strategies related to process parameters and variables, simultaneous production, process optimization through statistical and genetic tools, downstream processing and some aspects of commercial products formulations are presented.

Sustainable Surfactin Production by Bacillus subtilis Using Crude Glycerol from Different Wastes

Most biosurfactants are obtained using costly culture media and purification processes, which limits their wider industrial use. Sustainability of their production processes can be achieved, in part, by using cheap substrates found among agricultural and food wastes or byproducts. In the present study, crude glycerol, a raw material obtained from several industrial processes, was evaluated as a potential low-cost carbon source to reduce the costs of surfactin production by Bacillus subtilis #309. The culture medium containing soap-derived waste glycerol led to the best surfactin production, reaching about 2.8 g/L. To the best of our knowledge, this is the first report describing surfactin production by B. subtilis using stearin and soap wastes as carbon sources. A complete chemical characterization of surfactin analogs produced from the different waste glycerol samples was performed by liquid chromatography-mass spectrometry (LC-MS) and Fourier transform infrared spectroscopy (FTIR). Furthermore, the surfactin produced in the study exhibited good stability in a wide range of pH, salinity and temperatures, suggesting its potential for several applications in biotechnology.

The AraC-Type Transcriptional Regulator GliR (PA3027) Activates Genes of Glycerolipid Metabolism in Pseudomonas aeruginosa

Pseudomonas aeruginosa encodes a large set of transcriptional regulators (TRs) that modulate and manage cellular metabolism to survive in variable environmental conditions including that of the human body. The AraC family regulators are an abundant group of TRs in bacteria, mostly acting as gene expression activators, controlling diverse cellular functions (e.g., carbon metabolism, stress response, and virulence). The PA3027 protein from P. aeruginosa has been classified in silico as a putative AraC-type TR. Transcriptional profiling of P. aeruginosa PAO1161 overexpressing PA3027 revealed a spectacular increase in the mRNA levels of PA3026-PA3024 (divergent to PA3027), PA3464, and PA3342 genes encoding proteins potentially involved in glycerolipid metabolism. Concomitantly, chromatin immunoprecipitation-sequencing (ChIP-seq) analysis revealed that at least 22 regions are bound by PA3027 in the PAO1161 genome. These encompass promoter regions of PA3026, PA3464, and PA3342, showing the major increase in expression in response to PA3027 excess. In Vitro DNA binding assay confirmed interactions of PA3027 with these regions. Furthermore, promoter-reporter assays in a heterologous host showed the PA3027-dependent activation of the promoter of the PA3026-PA3024 operon. Two motifs representing the preferred binding sites for PA3027, one localized upstream and one overlapping with the -35 promoter sequence, were identified in PA3026p and our data indicate that both motifs are required for full activation of this promoter by PA3027. Overall, the presented data show that PA3027 acts as a transcriptional regulator in P. aeruginosa, activating genes likely engaged in glycerolipid metabolism. The GliR name, from a glycerolipid metabolism regulator, is proposed for PA3027 of P. aeruginosa.

Bio-cleaning Efficiency of Rhamnolipids Produced from Native Pseudomonas aeruginosa Grown on Agro-industrial By-products for Liquid Detergent Formulation

The cleaning activity of surface-active agents such as rhamnolipids (RLs) requires utmost effectiveness and is employed abundantly in various industries, particularly laundry cleaning, detergents, and cosmetics. In the current study, RLs were produced from Pseudomonas aeruginosa isolated from oil-contaminated soil using a minimal medium amended with agro-industrial by-products of refinery vegetable oil wastes (comprising of unsaturated types of fatty acids as determined by GC analysis) and dairy whey. The results showed that an amount of 5.72 g/L of RLs were obtained, while lower concentrations were obtained using chemically defined carbon sources. Ten congeners of mono- and di-RLs were detected by LC-MS, and they reduced the surface tension of water to 26 mN/m with a critical micelle concentration of 33 mg/L. Furthermore, the produced RLs showed promising cleaning and detergency properties in the removal of different stains on tested fabrics with a Stain Removal Index (SRI) of 17.45%. Moreover, an efficient cleaning was obtained when RLs were applied to a liquid detergent formulation model, and a cleaning power (∆E) of 245.95 and SRI of 36.28% were achieved. The present work showed that the produced RLs could be exploited as a powerful and alternative eco-friendly cleaning agent in many industries.

Isolation and characterization of a novel rhamnolipid producer Pseudomonas sp. LGMS7 from a highly contaminated site in Ain El Arbaa region of Ain Temouchent, Algeria

This study aims to isolate and characterize a novel rhamnolipid producer within the recent bioremediation approaches for treating hydrocarbon-contaminated soils in Algeria. In this context, from a hydrocarbon-contaminated soil, a newly bacterium designated LGMS7 was screened and identified, belonged to the Pseudomonas genus, and was closely related to Pseudomonas mucidolens, with a 16S rRNA sequence similarity of 99.05%. This strain was found to use different hydrocarbons and oils as a sole carbon and energy source for growth. It showed a stable emulsification index E₂₄ (%) of 66.66% ± 3.46 when growing in mineral salts medium (MSM) supplemented with 2% (v/v) glycerol after incubation for 6 days at 30 °C. Interestingly, it was also able to reduce the surface tension of the cell-free supernatant to around 30 ± 0.65 mN m^-1 with a critical micelle concentration (CMC) of 800 mg l^-1. It was found to be able to produce around 1260 ± 0.57 mg l^-1 as the yield of rhamnolipid production. Its biosurfactant has demonstrated excellent stability against pH (pH 2.0-12.0), salinity (0-150 g l^-1), and temperature (-20 to 121 °C). Based on various chromatographic and spectroscopic techniques (i.e., TLC, FTIR, ¹H-NMR), it was found to belong to the glycolipid class (i.e., rhamnolipids). Taken altogether, the strain LGMS7 and its biosurfactant display interesting biotechnological capabilities for the bioremediation of hydrocarbon-contaminated sites. To the best of our knowledge, this is the first study that described the production of biosurfactants by Pseudomonas mucidolens species.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02751-6.

Lipopeptides production by a newly Halomonas venusta strain: Characterization and biotechnological properties

A halotolerant marine strain PHKT of Halomonas venusta was isolated from contaminated seawater as an efficient biosurfactant producer candidate, on low-value substrate (glycerol). The produced biosurfactants (Bios-PHKT) were characterized as lipopeptides molecules, belonging to surfactin and pumilacidin families, by using Thin Layer Chromatography (TLC), Fourier Transform Infrared Spectroscopy (FT-IR) and Tandem Mass Spectrometry (MALDI-TOF/MS-MS). Bios-PHKT has a critical micelle concentration (CMC) of 125 mg/L, and showed a high steadiness against a wide spectrum of salinity (0-120 g/L NaCl), temperature (4-121 °C) and pH (2-12), supporting its powerful tensioactive properties under various environmental conditions. Likewise, the cytotoxic test revealed that the biosurfactant Bios-PHKT, at concentrations lower than 125 µg/mL, was not cytotoxic for human HEK-293 cells since the cell survival is over than 80%. Furthermore, Bios-PHKT lipopeptides showed excellent anti-adhesive and anti-biofilm activities, being able to avoid and disrupt the biofilm formation by certain pathogenic microorganisms. In addition, the biosurfactant Bios-PHKT showed a remarkable anti-proliferative activity towards tumor B16 melanoma cell line. Besides, Bios-PHKT exhibited an excellent in vitro and in vivo wound healing process. In light of these promising findings, Bios-PHKT could be successfully used in different biotechnological applications.

Microbial glycoconjugates in organic pollutant bioremediation: recent advances and applications

The large-scale application of organic pollutants (OPs) has contaminated the air, soil, and water. Persistent OPs enter the food supply chain and create several hazardous effects on living systems. Thus, there is a need to manage the environmental levels of these toxicants. Microbial glycoconjugates pave the way for the enhanced degradation of these toxic pollutants from the environment. Microbial glycoconjugates increase the bioavailability of these OPs by reducing surface tension and creating a solvent interface. To date, very little emphasis has been given to the scope of glycoconjugates in the biodegradation of OPs. Glycoconjugates create a bridge between microbes and OPs, which helps to accelerate degradation through microbial metabolism. This review provides an in-depth overview of glycoconjugates, their role in biofilm formation, and their applications in the bioremediation of OP-contaminated environments.

Bioprospecting of rhamnolipids production and optimization by an oil-degrading Pseudomonas sp. S2WE isolated from freshwater lake

The present study revealed biosurfactants production by a novel oil-degrading Pseudomonas sp. S2WE isolated from hydrocarbon enriched water sample, where the genus Pseudomonas (48.65%) was dominated amongst several other genera. Biosurfactants produced by this strain showed the great potential for surface tension reduction (SFT) and emulsification. The extracted crude biosurfactants were characterized using ultra-high-performance liquid chromatography-Mass Spectrometry (UHPLC-MS) and identified various mono-and di-rhamnolipids homologs from the mixture. Moreover, the lowest SFT 33.05 ± 0.1 mN/m and highest emulsification of 60.65 ± 0.64% were achieved from rhamnolipids produced from glycerol with urea. Compared to initial screening, almost (>87%) higher emulsification was observed. In addition, the biosurfactants were found highly stable at different environmental factors i.e. temperature (4 °C-121 °C), pH (3-10) and NaCl conc. (1-9%). The high stable rhamnolipids produced by new Pseudomonas sp. S2WE in this study could widely be used in enormous industrial as well as environmental applications.

Exploration of nanocellulose washing agent for the green remediation of phenanthrene-contaminated soil

Polycyclic aromatic hydrocarbons are hazardous contaminants existing ubiquitously in polluted soil. In this study, using nanocellulose (CNC) fluid as an eco-friendly agent was proposed for the first time in the remediation of phenanthrene (PHE) contaminated soil. The effects of environmental factors on the mobilization of PHE in soil by CNC nanofluid was investigated using factorial analysis. The results showed that temperature and ionic strength had a significant influence on PHE removal, which were associated with the viscosity and zeta potential change in the nanofluid. The analysis based on two-dimensional correlation spectroscopy integrated with FTIR and synchrotron-based XRF imaging revealed that metals and minerals in soil played important roles in PHE detachment. The hydroxyl groups on CNC bonded with Fe-O, Si-O, and Mn-O in soil as time went on, and eventually achieved PHE mobilization through the interruption of PHE/SOM-metal/mineral linkages. The complexation and transport of PHE/SOM-metals/minerals from soil particles to the aqueous phase could be the primary PHE removal mechanism. Besides, the biotoxicity study displayed a detoxification effect of CNC nanofluid on PHE contaminants in soil. This study offers new insight into a cost-effective and biodegradable nanocellulose washing agent, which can be a good alternative to the available site remediation options.

Development and Genetic Engineering of Hyper-Producing Microbial Strains for Improved Synthesis of Biosurfactants

Current research energies are fixated on the synthesis of environmentally friendly and non-hazardous products, which include finding and recognizing biosurfactants that can substitute synthetic surfactants. Microbial biosurfactants are surface-active compounds synthesized intracellularly or extracellularly. To use biosurfactants in various industries, it is essential to understand scientific engagements that demonstrate its potentials as real advancement in the 21st century. Other than applying a substantial effect on the world economic market, engineered hyper-producing microbial strains in combination with optimized cultivation parameters have made it probable for many industrial companies to receive the profits of 'green' biosurfactant innovation. There needs to be an emphasis on the worldwide state of biosurfactant synthesis, expression of biosurfactant genes in expressive host systems, the recent developments, and prospects in this line of research. Thus, molecular dynamics with respect to genetic engineering of biosynthetic genes are proposed as new biotechnological tools for development, improved synthesis, and applications of biosurfactants. For example, mutant and hyper-producing recombinants have been designed efficaciously to advance the nature, quantity, and quality of biosurfactants. The fastidious and deliberate investigation will prompt a comprehension of the molecular dynamics and phenomena in new microorganisms. Throughout the decade, valuable data on the molecular genetics of biosurfactant have been produced, and this solid foundation would encourage application-oriented yields of the biosurfactant production industry and expand its utilization in diverse fields. Therefore, the conversations among different interdisciplinary experts from various scientific interests such as microbiology, biochemistry, molecular biology, and genetics are indispensable and significant to accomplish these objectives.

Production, functional stability, and effect of rhamnolipid biosurfactant from Klebsiella sp. on phenanthrene degradation in various medium systems

The present study investigated the stability and efficacy of a biosurfactant produced by Klebsiella sp. KOD36 under extreme conditions and its potential for enhancing the solubilization and degradation of phenanthrene in various environmental matrices. Klebsiella sp. KOD36 produced a mono-rhamnolipids biosurfactant with a low critical micelle concentration (CMC) value. The biosurfactant was stable under extreme conditions (60 °C, pH 10 and 10% salinity) and could lower surface tension by 30% and maintained an emulsification index of > 40%. The emulsion index was also higher (17-43%) in the presence of petroleum hydrocarbons compared to synthetic surfactant Triton X-100. Investigation on phenanthrene degradation in three different environmental matrices (aqueous, soil-slurry and soil) confirmed that the biosurfactant enhanced the solubilization and biodegradation of phenanthrene in all matrices. The high functional stability and performance of the biosurfactant under extreme conditions on phenanthrene degradation show the great potential of the biosurfactant for remediation applications under harsh environmental conditions.

Investigation of halotolerant marine Staphylococcus sp. CO100, as a promising hydrocarbon-degrading and biosurfactant-producing bacterium, under saline conditions

A halotolerant strain CO100 of Staphylococcus sp. was isolated from contaminated sediments taken from the fishing harbour of Sfax, Tunisia, as an efficient hydrocarbonoclastic candidate. Strain CO100 exhibited a high capacity to break down almost 72% of the aliphatic hydrocarbons contained in crude oil (1%, v/v), used as the sole carbon and energy source, after 20 days of culture, at 100 g/l NaCl, 37 °C and 180 rpm. The isolate CO100 displayed also its ability to grow on phenanthrene, fluoranthene and pyrene (100 mg/l), at 100 g/l NaCl. Moreover, the isolate CO100 showed a notable aptitude to synthesize an efficient tensioactive agent namely BS-CO100, on low-value substrates including residual frying oil and expired milk powder, thus reducing the high cost of biosurfactant production. The ESI/MS analysis designated that BS-CO100 belonged to lipopeptide class, in particular lichenysin and iturine members. Critical micelle concentrations of BS-CO100 were varying between 65 and 750 mg/l, depending on of the purity of the biosurfactant and the used carbon sources. BS-CO100 showed a high steadiness against a wide spectrum of pH (4.3-12), temperature (4-121 °C) and salinity (0-300 g/l NaCl), supporting its powerful tensioactive properties under various environmental conditions. Likewise, BS-CO100 exhibited no cytotoxic effect toward human HEK293 cells, at concentrations within 125 and 1000 μg/ml. Furthermore, the biosurfactant BS-CO100 exhibited remarkable anti-adhesive and anti-biofilm activities, being able to avoid and disrupt the biofilm formation by certain pathogenic microorganisms. In addition, BS-CO100 was found to have more potential to remove hydrocarbons from contaminated soils, compared to some chemical surfactants. In light of these promising findings, strain CO100, as well as its biosurfactant, could be successfully used in different biotechnological applications including the bioremediation of oil-polluted areas, even under saline conditions.

Manganese (Mn) removal prediction using extreme gradient model

Exploring the Manganese (Mn) removal prediction with several independent variables is tremendously critical and indispensable to understand the pattern of removal process. Mn is one of the key heavy metals (HMs) stipulated by the WHO for the development of many attributes of the ecosystem in controlled quantity. In the present paper, an extreme gradient model (XGBoost) is proposed for Mn prediction. A compressive statistical analysis reveals the stochastics behaviour of the data prior to the prediction investigation. The main goal is to determine the Mn predictability of XGBoost algorithm with influencing factors such as D₂EHPA (M), Time (min), H₂SO₄ (M), NaCl (g/L), and EDTA (mM). The PCA biplot signifies the importance of the predictors. The XGBoost model validated against a diversity of data-driven models such as multilinear regression (MLR), support vector machine (SVM), and random forest (RF). The order of the applied models' performance are XGBoost > RF > SVM > MLR as per their R² and RMSE metrics over testing phase i.e. 20.88, 0.75, 0.61, 0.40, and 2.23, 3.01, 3.51, 6.38, respectively. Moreover, the Taylor diagram and Radar chart have drown to emphasize the XGBoost model efficiency, stability, and reliability. In respect of XGBoost model prediction, 'Time' predictor outperforms D₂EHPA, EDTA, H₂SO₄, and NaCl predictors in order.

Enhanced biodegradation of crude oil in soil by a developed bacterial consortium and indigenous plant growth promoting bacteria

AIMS

This study aimed to develop an efficient, cost-effective and eco-friendly bacterial consortium to degrade petroleum sludge.

METHODS AND RESULTS

Four bacterial strains belonging to genera Acinetobacter and Pseudomonas were selected to constitute three different consortia based on their initial concentration. The highest degradation rate (78%) of 1% (v/v) crude oil after 4 weeks of incubation was recorded when the concentration of biosurfactant (BS) producing isolate was high. Genes, such as alkB, almA, cyp153, pah-rhdGN, nah, phnAC and cat23 were detected using the polymerase chain reaction method and their induction levels were optimal at pH 7·0. A crude oil sludge was artificially constituted, and its bacterial composition was investigated using 16S rRNA gene amplicon sequencing. The results showed that the soil bacterial community was dominated by plant growth-promoting bacteria (PGPB) after crude oil treatment.

CONCLUSIONS

Our findings indicate the decontamination of the crude oil contaminated soil was more effective in the presence of both the constituted consortium and PGPB compared to the presence of PGPB alone.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study showed that the PGPB (Taibaiella) present in petroleum uncontaminated soil can promote the soil decontamination. The addition of both efficient hydrocarbon-degrading and BS producing bacteria is also necessary to improve the decontamination.

Rhamnolipid exhibits anti-biofilm activity against the dermatophytic fungi Trichophyton rubrum and Trichophyton mentagrophytes

Dermatophytes are responsible for a majority of fungal infections in humans and other vertebrates, causing dermatophytosis. Treatment failures are often associated with biofilm formation, making dermatophytes resistant to antifungals. In this study, effects of a rhamnolipid (RL-SS14) produced by Pseudomonas aeruginosa SS14 on planktonic cells of Trichophyton rubrum and Trichophyton mentagrophytes, their biofilm formation, and disruption of mature biofilms were assessed. The composition of RL-SS14 was analysed using FTIR, HPLC-ESI-MS, and GC-MS. Minimum inhibitory concentrations against the planktonic forms of T. rubrum and T. mentagrophytes were 0.5 mg/mL and 0.125 mg/mL, respectively. Crystal-violet (biofilm biomass) and safranin (extracellular matrix) staining revealed that RL-SS14 significantly inhibited biofilm formation and also reduced preformed biofilms in a dose-dependent manner. Microscopic visualization of treated biofilms via SEM, AFM, and CLSM revealed marked morphological damage, cell death, and reduced extracellular matrix. The results indicate the potential of RL-SS14 as an anti-biofilm agent against dermatophytes.