ATP-mediated intrinsic peroxidase-like activity of Fe3O4-based nanozyme: One step detection of blood glucose at physiological pH

Nanozymes and their biomolecular conjugates as next-generation antibacterial agents: A comprehensive review

Antimicrobial resistance (AMR), the ability of bacterial species to develop resistance against exposed antibiotics, has gained immense global attention in the past few years. Bacterial infections are serious health concerns affecting millions of people annually worldwide. Therefore, developing novel antibacterial agents that are highly effective and avoid resistance development is imperative. Among various strategies, recent developments in nanozyme technology have shown promising results as antibacterials in several antibiotic-sensitive and resistant bacterial species. Nanozymes offer several advantages over corresponding natural enzymes, such as inexpensive, stable, multifunctional, tunable catalytic properties. Although the use of nanozymes as antibacterial agents has provided promising results, the specific biomolecule-conjugated nanozymes have shown further improvement in catalytic performance and associated antibacterial efficacy. The exclusive design of functional nanozymes with theranostic potential is found to simultaneously inhibit the growth and image of AMR bacterial species. This review comprehensively summarizes the history of nanozymes, their classification, biomolecules conjugated nanozyme, and their mechanism of enzyme-mimetic activity and associated antibacterial activity in antibiotic-sensitive and resistant species. The future needs to effectively engineer the existing or new nanozymes to curb AMR have also been discussed.

Breaking the pH Limitation of Nanozymes: Mechanisms, Methods, and Applications

Although nanozymes have drawn great attention over the past decade, the activities of peroxidase-like, oxidase-like, and catalase-like nanozymes are often pH dependent with elusive mechanism, which largely restricts their application. Therefore, a systematical discussion on the pH-related catalytic mechanisms of nanozymes together with the methods to overcome this limitation is in need. In this review, various nanozymes exhibiting pH-dependent catalytic activities are collected and the root causes for their pH dependence are comprehensively analyzed. Subsequently, regulatory concepts including catalytic environment reconstruction and direct catalytic activity improvement to break this pH restriction are summarized. Moreover, applications of pH-independent nanozymes in sensing, disease therapy, and pollutant degradation are overviewed. Finally, current challenges and future opportunities on the development of pH-independent nanozymes are suggested. It is anticipated that this review will promote the further design of pH-independent nanozymes and broaden their application range with higher efficiency.

Tailoring metal oxide nanozymes for biomedical applications: trends, limitations, and perceptions

Nanomaterials with enzyme-like properties are known as 'nanozymes'. Nanozymes are preferred over natural enzymes due to their nanoscale characteristics and ease of tailoring of their physicochemical properties such as size, structure, composition, surface chemistry, crystal planes, oxygen vacancy, and surface valence state. Interestingly, nanozymes can be precisely controlled to improve their catalytic ability, stability, and specificity which is unattainable by natural enzymes. Therefore, tailor-made nanozymes are being favored over natural enzymes for a range of potential applications and better prospects. In this context, metal oxide nanoparticles with nanozyme-mimicking characteristics are exclusively being used in biomedical sectors and opening new avenues for future nanomedicine. Realising the importance of this emerging area, here, we discuss the mechanistic actions of metal oxide nanozymes along with their key characteristics which affect their enzymatic actions. Further, in this critical review, the recent progress towards the development of point-of-care (POC) diagnostic devices, cancer therapy, drug delivery, advanced antimicrobials/antibiofilm, dental caries, neurodegenerative diseases, and wound healing potential of metal oxide nanozymes is deliberated. The advantages of employing metal oxide nanozymes, their potential limitations in terms of nanotoxicity, and possible prospects for biomedical applications are also discussed with future recommendations.

S-Doping Regulated Iron Spin States in Fe-N-C Single-Atom Material for Enhanced Peroxidase-Mimicking Activity at Neutral pH

Designing biomimetic nanomaterials with peroxidase (POD)-like activity at neutral pH remains a significant challenge. An S-doping strategy is developed to afford an iron single-atom nanomaterial (Fe1@CN-S) with high POD-like activity under neutral conditions. To the best of knowledge, there is the first example on the achievement of excellent POD-like activity under neutral conditions by regulating the active site structure. S-doping not only promotes the dissociation of the N─H bond in 3,3″,5,5″-tetramethylbenzidine (TMB), but also facilitates the desorption of OH* by the transformation of iron species' spin states from middle-spin (MS FeII) to low-spin (LS FeII). Meanwhile, LS FeII sites typically have more unfilled d orbitals, thereby exhibiting stronger interactions with H2O2 than MS FeII, which can enhance POD-like activity. Finally, a one-pot visual detection of glucose at pH 7 is performed, demonstrating the best selectivity and sensitivity than previous reports.

Immobilizing nanozymes on 3D-printed metal substrates for enhanced peroxidase-like activity and trace-level glucose detection

The prevalence of 3D-printed portable biomedical sensing devices, which are fashioned mainly from plastic and polymer materials, introduces a pressing concern due to their limited reusability and consequential generation of substantial disposable waste. Considering this, herein, we pioneered a ground-breaking advancement, i.e., a 3D-printed metal substrate-based enzyme. Our inventive methodology involved the synthesis of a thermally degraded Fe-based metal-organic framework, DEG 500, followed by its deposition on a 3D-printed metal substrate composed of Ti-Al-V alloy. This novel composite exhibited remarkable peroxidase-like activity in a range of different temperatures and pH, coupled with the ability to detect glucose in real-world samples such as blood and fruit juices. The exceptional enzymatic behaviour was attributed to the diverse iron (Fe) oxidation states and the presence of oxygen vacancies, as evidenced through advanced characterization techniques. Fundamentally, we rigorously explored the mechanistic pathway through controlled studies and theoretical calculations, culminating in a transformative stride toward more sustainable and effective biomedical sensing practices.

In situ Hg2+ improved the peroxidase-like activity and triggered "ON" the oxidase-like activity of yolk-shell Co3S4 microspheres for the detection of Hg2

Exploring highly active nanozymes is an important task to realize the real-time detection of some heavy metal ions in water. In this work, yolk-shell Co3S4 microspheres have been verified to possess excellent peroxidase-like activity, which can be further improved by adding Hg2+. Very interestingly, Hg2+ can trigger "ON" the oxidase-like activity of Co3S4 microspheres. The dual peroxidase-/oxidase-like activity of the yolk-shell Co3S4 microspheres is evaluated by using the chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB). Furthermore, comprehensive studies verify that the enhanced peroxidase-like activity, together with the "ON" oxidase-like activity of the yolk-shell Co3S4 microspheres, is attributed to the in situ generation of HgS on the surface of Co3S4 microspheres and then the release of more active sites. Importantly, the in situ generated HgS on the surface of Co3S4 microspheres can form a heterojunction, which also accelerates the catalytic process. During the catalytic reaction, some active species (O2- and h+) can be detected by ESR. Thus, a colorimetric sensing platform based on Hg2+-triggered signal amplification has been successfully constructed, which can be validated by the detection of Hg2+ residue in environmental water.

Utilising the Nanozymatic Activity of Copper-Functionalised Mesoporous C3 N5 for Sensing Biomolecules

Designing unique nanomaterials for the selective sensing of biomolecules is of significant interest in the field of nanobiotechnology. In this work, we demonstrated the synthesis of ordered Cu nanoparticle-functionalised mesoporous C3 N5 that has unique peroxidase-like nanozymatic activity for the ultrasensitive and selective detection of glucose and glutathione. A nano hard-templating technique together with the in-situ polymerisation and self-assembly of Cu and high N-containing CN precursor was adopted to introduce mesoporosity as well as high N and Cu content in mesoporous C3 N5 . Due to the ordered structure and highly dispersed Cu in the mesoporous C3 N5 , a large enhancement of the peroxidase mimetic activity in the oxidation of a redox dye in the presence of hydrogen peroxide could be obtained. Additionally, the optimised Cu-functionalised mesoporous C3 N5 exhibited excellent sensitivity to glutathione with a low detection limit of 2.0 ppm. The strong peroxidase activity of the Cu-functionalised mesoporous C3 N5 was also effectively used for the sensing of glucose with a detection limit of 0.4 mM through glucose oxidation with glucose oxidase. This unique Cu-functionalised mesoporous C3 N5 has the potential for detecting various molecules in the environment as well as for next-generation glucose and glutathione diagnostic devices.

Health hazards of particles in additive manufacturing: a cross-disciplinary study on reactivity, toxicity and occupational exposure to two nickel-based alloys

The increasing use of additive manufacturing (AM) techniques (e.g., 3D-printing) offers many advantages but at the same time presents some challenges. One concern is the possible exposure and health risk related to metal containing particles of different sizes. Using the nickel-based alloys Hastelloy X (HX) and Inconel 939 (IN939) as a case, the aim of this cross-disciplinary study was to increase the understanding on possible health hazards and exposure. This was done by performing in-depth characterization of virgin, reused and condensate powders, testing in vitro toxicity (cytotoxicity, genotoxicity, oxidative stress), and measuring occupational airborne exposure. The results showed limited metal release from both HX and IN939, and slightly different surface composition of reused compared to virgin powders. No or small effects on the cultured lung cells were observed when tested up to 100 µg/mL. Particle background levels in the printing facilities were generally low, but high transient peaks were observed in relation to sieving. Furthermore, during post processing with grinding, high levels of nanoparticles (> 100,000 particles/cm3) were noted. Urine metal levels in AM operators did not exceed biomonitoring action limits. Future studies should focus on understanding the toxicity of the nanoparticles formed during printing and post-processing.

ATP-triggered, selective superoxide radical generating oxidase-mimetic cerium oxide nanozyme exhibiting efficient antibacterial activity at physiological pH

Bacterial infections are considered as one of the major health threats to the global population. The advent of bacterial species with antibiotic resistance has attracted significant efforts to develop novel materials and strategies to effectively avoid the resistance with enhanced antibacterial potential. In this work, we have developed oxidase-mimetic cerium oxide nanoparticles (CeO2 NPs), which exhibit nanozyme activity at physiological pH in the presence of adenosine triphosphate (ATP). The oxidase-mimetic activity was confirmed to involve superoxide radicals using p-benzoquinone and dihydroethidium. Using indole propionic acid, ethanol, and terephthalic acid, it was confirmed that the oxidase-mimetic activity of CeO2 NPs with ATP does not involve the formation of hydroxyl radicals. CeO2 NPs with ATP produced a strong antibacterial activity against Staphylococcus aureus and Escherichia coli within 3 - 6 hrs. The bacterial cell morphology analysis suggested that superoxide radicals generated during the oxidase-mimetic activity of CeO2 NPs with ATP cause distortion of paired and tetrad arrangement (Staphylococcus aureus), loss of cytoplasmic content, damage, and pore formation in the cell wall (Escherichia coli) that led to the death of bacteria. Further, the live/dead assay also concludes the time-dependent death of bacterial cells with the highest death in the cell population exposed to CeO2 NPs and ATP. Thus, the antibacterial activity at physiological pH by superoxide radical generating oxidase-mimetic CeO2 NPs could be further extended to other pathogenic bacterial species.

Smart Nanozymes for Cancer Therapy: The Next Frontier in Oncology

Nanomaterials that mimic the catalytic activity of natural enzymes in the complex biological environment of the human body are called nanozymes. Recently, nanozyme systems have been reported with diagnostic, imaging, and/or therapeutic capabilities. Smart nanozymes strategically exploit the tumor microenvironment (TME) by the in situ generation of reactive species or by the modulation of the TME itself to result in effective cancer therapy. This topical review focuses on such smart nanozymes for cancer diagnosis, and therapy modalities with enhanced therapeutic effects. The dominant factors that guide the rational design and synthesis of nanozymes for cancer therapy include an understanding of the dynamic TME, structure-activity relationships, surface chemistry for imparting selectivity, and site-specific therapy, and stimulus-responsive modulation of nanozyme activity. This article presents a comprehensive analysis of the subject including the diverse catalytic mechanisms of different types of nanozyme systems, an overview of the TME, cancer diagnosis, and synergistic cancer therapies. The strategic application of nanozymes in cancer treatment can well be a game changer in future oncology. Moreover, recent developments may pave the way for the deployment of nanozyme therapy into other complex healthcare challenges, such as genetic diseases, immune disorders, and ageing.

Engineering hetero-structural iron nanozyme decorated liposome with a self-cascade catalysis performance

Metal-based enzyme mimics are considered as acceptable agents in fabricating heterogeneous biocomposites through valency integrations because of their biomedical or biological properties. As the basic substitute, it delights us to utilize Fe3O4 nanoparticles (NPs) as metallic enzymes and overcome the limitation of peroxide-like enzymatic activity in physiological conditions. In this work, we present the fabrication of a soy phosphatidylcholine/Fe3O4@Ag/GOx (SFAG) biocomposite as a cascade enzyme, which exhibits a peroxidase-like property in kinetic processes, as shown from an analysis of the glucose detection processes. We also explored the mechanism of an ultrasound & microfluidic approach for the synthesis of SFAG. The resultant SFAG implies a characteristic absorption peak (652 nm), size (55 μm), and surface charge (-32.93 ± 2.58 mV). This is utilized to confirm the peroxidase-like activity by catalyzing 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H2O2 under physiological conditions. But also, SFAG conveys a positive effect on the peroxidase-like activity at pH = 5.8, 7.4, and 8.0. The Michaelis-Menten parameters (Km) and the Vmax values of H2O2 are 1.914 mM and 1.429 × 10-7 M s-1, which further confirms the catalytic performances of the SFAG structure. The established platform was also used successfully for the determination of glucose in PBS and diluted synthetic blood with excellent sensitivity and stability. The relative selection and sensitivity show that the SFAG structure has a great possibility as a cascade metallic enzyme in chemokinetic works.

Engineering a gold nanoparticles-carbon dots nanocomposite with pH-flexibility for monitoring hydrogen peroxide released from living cells

Constructing nanozymes with satisfactory catalytic efficiency under physiological conditions is still in great demand for facilitating the advancement of biocatalysts. We herein present a gold nanoparticles-carbon dots nanocomposite (Au-CDs) as an efficient photo-activated nanozyme for monitoring H2O2 released from living cells. The integration of CDs with AuNPs remarkably accelerates the catalytic activity at neutral pH via engaging Mn3+ ions as the mediators. Meanwhile, the reserved cyclodextrin cavities also enhance the adsorption capacity towards chromogenic substrates through host-guest interactions. Moreover, taking advantage of the inhibitory effect of H2O2 on the photo-oxidation ability of the Au-CDs nanocomposite, the Au-CDs based colorimetric method was able to realize in situ assessment of the hydrogen peroxide (H2O2) released from living cells. This method paves a new way to establish a promising biosensing platform for unraveling biological events.

Research Progress in Iron-Based Nanozymes: Catalytic Mechanisms, Classification, and Biomedical Applications

Natural enzymes are crucial in biological systems and widely used in biology and medicine, but their disadvantages, such as insufficient stability and high-cost, have limited their wide application. Since Fe₃O₄ nanoparticles were found to show peroxidase-like activity, researchers have designed and developed a growing number of nanozymes that mimic the activity of natural enzymes. Nanozymes can compensate for the defects of natural enzymes and show higher stability with lower cost. Iron, a nontoxic and low-cost transition metal, has been used to synthesize a variety of iron-based nanozymes with unique structural and physicochemical properties to obtain different enzymes mimicking catalytic properties. In this perspective, catalytic mechanisms, activity modulation, and their recent research progress in sensing, tumor therapy, and antibacterial and anti-inflammatory applications are systematically presented. The challenges and perspectives on the development of iron-based nanozymes are also analyzed and discussed.

User-friendly and ultra-stable all-inclusive gold tablets for cysteamine detection

To date, a range of nanozymes has been reported for their enzyme-mimicking catalytic activity such as solution-based sensors. However, in remote areas, the need for portable, cost-effective, and one-pot prepared sensors is obvious. In this study, we report the development of a highly stable and sensitive gold tablet-based sensor for cysteamine quantification in human serum samples. The sensor is produced in two steps: synthesis of a pullulan-stabilized gold nanoparticle solution (pAuNP-Solution) using a pullulan polymer as a reducing, stabilizing, and encapsulating agent and then, casting the pAuNP-Solution into a pullulan gold nanoparticle tablet (pAuNP-Tablet) by a pipetting method. The tablet was characterized by UV-vis, DLS, FTIR, TEM, and AFM analyses. The pAuNP-tablet exhibited a high peroxidase-mimetic activity via a TMB-H₂O₂ system. The presence of cysteamine in the system introduced two types of inhibition which were dependent on the cysteamine concentration. By determining Michaelis-Menten's kinetic parameters, we gained mechanistic insights into the catalytic inhibition process. Based on the catalytic inhibition capability of cysteamine, the limit of detection (LoD) was calculated to be 69.04 and 82.9 μM in buffer and human serum samples, respectively. Finally, real human serum samples were tested, demonstrating the applicability of the pAuNP-Tablet for real-world applications. The % R values in human serum samples were in the range of 91-105% with % RSD less than 2% for all replicas. The stability tests over 16 months revealed the ultra-stable properties of the pAuNP-Tablet. Overall, with a simple fabrication method and a novel employed technique, this study contributes to the advancement of tablet-based sensors and helps in cysteamine detection in clinical settings.

Magnetic biosensors for identification of SARS-CoV-2, Influenza, HIV, and Ebola viruses: a review

Infectious diseases such as novel coronavirus (SARS-CoV-2), Influenza, HIV, Ebola, etc kill many people around the world every year (SARS-CoV-2 in 2019, Ebola in 2013, HIV in 1980, Influenza in 1918). For example, SARS-CoV-2 has plagued higher than 317 000 000 people around the world from December 2019 to January 13, 2022. Some infectious diseases do not yet have not a proper vaccine, drug, therapeutic, and/or detection method, which makes rapid identification and definitive treatments the main challenges. Different device techniques have been used to detect infectious diseases. However, in recent years, magnetic materials have emerged as active sensors/biosensors for detecting viral, bacterial, and plasmids agents. In this review, the recent applications of magnetic materials in biosensors for infectious viruses detection have been discussed. Also, this work addresses the future trends and perspectives of magnetic biosensors.

Amorphous Fe-Containing Phosphotungstates Featuring Efficient Peroxidase-like Activity at Neutral pH: Toward Portable Swabs for Pesticide Detection with Tandem Catalytic Amplification

Peroxidase-mimetic materials are intensively applied to establish multienzyme systems because of their attractive merits. However, almost all of the nanozymes explored exhibit catalytic capacity only under acidic conditions. The pH mismatch between peroxidase mimics in acidic environments and bioenzymes under neutral conditions significantly restricts the development of enzyme-nanozyme catalytic systems especially for biochemical sensing. To solve this problem, here amorphous Fe-containing phosphotungstates (Fe-PTs) featuring high peroxidase activity at neutral pH were explored to fabricate portable multienzyme biosensors for pesticide detection. The strong attraction of negatively charged Fe-PTs to positively charged substrates as well as the accelerated regeneration of Fe²⁺ by the Fe/W bimetallic redox couples was demonstrated to play important roles in endowing the material with peroxidase-like activity in physiological environments. Consequently, integrating the developed Fe-PTs with acetylcholinesterase and choline oxidase led to an enzyme-nanozyme tandem platform with good catalytic efficiency at neutral pH for organophosphorus pesticide response. Furthermore, they were immobilized onto common medical swabs to fabricate portable sensors for paraoxon detection conveniently based on smartphone sensing, showing excellent sensitivity, good anti-interference capacity, and low detection limit (0.28 ng/mL). Our contribution expands the horizon of acquiring peroxidase activity at neutral pH, and it will also open avenues to construct portable and effective biosensors for pesticides and other analytes.

Dual-Enzyme Cascade Composed of Chitosan Coated FeS2 Nanozyme and Glucose Oxidase for Sensitive Glucose Detection

Immobilizing enzymes with nanozymes to catalyze cascade reactions overcomes many of the shortcomings of biological enzymes in industrial manufacturing. In the study, glucose oxidases were covalently bound to FeS₂ nanozymes as immobilization carriers while chitosan encapsulation increased the activity and stability of the immobilized enzymes. The immobilized enzymes exhibited a 10% greater increase in catalytic efficiency than the free enzymes while also being more stable and catalytically active in environments with an alkaline pH of 9.0 and a high temperature of 100 °C. Additionally, the FeS₂ nanozyme-driven double-enzyme cascade reaction showed high glucose selectivity, even in the presence of lactose, dopamine, and uric acid, with a limit of detection (LOD) (S/N = 3) as low as 1.9 × 10^-6 M. This research demonstrates that nanozymes may be employed as ideal carriers for biological enzymes and that the nanozymes can catalyze cascade reactions together with natural enzymes, offering new insights into interactions between natural and synthetic biosystems.

Multifunctional Hybrid Nanozymes for Magnetic Enrichment and Bioelectrocatalytic Sensing of Circulating Tumor RNA during Minimal Residual Disease Monitoring

Iron oxide nanozymes are a form of nanomaterial with both superparamagnetic and enzyme-mimicking properties. Ongoing research efforts have been made to create multifunctional iron oxide hybrid nanozymes with auxiliary properties through biomolecular modifications. Such iron oxide hybrid nanozymes can be useful for rapid and cost-effective analysis of circulating tumor nucleic acids (ctNAs) in patient liquid biopsies during minimal residual disease (MRD) monitoring of cancer recurrence. Herein, the use of streptavidin-modified iron oxide hybrid nanozymes is reported for magnetic enrichment and bioelectrocatalytic sensing of three prostate cancer (PCa) ctRNA biomarkers with high detection specificity and sensitivity (10 copies) over an ultrabroad dynamic range (five orders of magnitude). Furthermore, the feasibility of ctRNA analysis for pre- and post-cancer treatment MRD monitoring is demonstrated using PCa urinary liquid biopsy samples.

Nanozyme's catalytic activity at neutral pH: reaction substrates and application in sensing

Nanozymes exhibit their great potential as alternatives to natural enzymes. In addition to catalytic activity, nanozymes also need to have biologically relevant catalytic reactions at physiological pH to fit in the definition of an enzyme and to achieve efficient analytical applications. Previous reviews in the nanozyme field mainly focused on the catalytic mechanisms, activity regulation, and types of catalytic reactions. In this paper, we discuss efforts made on the substrate-dependent catalytic activity of nanozymes at neutral pH. First, the discrepant catalytic activities for different substrates are compared, where the key differences are the characteristics of substrates and the adsorption of substrates by nanozymes at different pH. We then reviewed efforts to enhance reaction activity for model chromogenic substrates and strategies to engineer nanomaterials to accelerate reaction rates for other substrates at physiological pH. Finally, we also discussed methods to achieve efficient sensing applications at neutral pH using nanozymes. We believe that the nanozyme is catching up with enzymes rapidly in terms of reaction rates and reaction conditions. Designing nanozymes with specific catalysis for efficient sensing remains a challenge.

A peroxidase-like magneto-gold nanozyme AuNC@Fe3O4 with photothermal effect for induced cell apoptosis of hepatocellular carcinoma cells in vitro

Hepatocellular carcinoma (HCC) is one of the most commonly diagnosed and malignant cancers worldwide. Conventional therapy strategies may not completely eradicate the tumor and may cause side effects during treatment. Nano-catalytic therapy, as a novel strategy, has attracted a great deal of attention. This study aimed to synthesize a multifunctional magneto-gold nanozyme AuNC@Fe₃O₄ and evaluate its anti-cancer potential in HepG2 cells in vitro. The characteristics of AuNC@Fe₃O₄ were assessed using a transmission electron microscope, dynamic light scattering, and energy-dispersive X-ray. The photothermal performance and peroxidase (POD)-like activity of AuNC@Fe₃O₄ were detected, using thermal camera and ultraviolet-visible spectrophotometer, respectively. The anti-cancer potential of AuNC@Fe₃O₄ was examined using cell counting kit-8, live/dead cell staining, and apoptosis analysis. Further research on HepG2 cells included the detection of intracellular reactive oxygen species (ROS) and lysosomal impairment. We observed that the AuNC@Fe₃O₄ had a small size, good photothermal conversion efficiency and high POD-like activity, and also inhibited cell proliferation and enhanced cell apoptotic ability in HepG2 cells. Furthermore, the AuNC@Fe₃O₄ enhanced ROS production and lysosomal impairment via the synergistic effect of photothermal and nano-catalytic therapies, which induced cell death or apoptosis. Thus, the magneto-gold nanozyme AuNC@Fe₃O₄ may offer a potential anti-cancer strategy for HCC.

Fluoride-assisted detection of glutathione by surface Ce3+/Ce4+ engineered nanoceria

Nanoceria has evolved as a promising nanomaterial due to its unique enzyme-like properties, including excellent oxidase mimetic activity, which significantly increases in the presence of fluoride ions. However, this significant increase in oxidase activity has never been utilised as a signal enhancer for the detection of biological analytes partly because of the lack of understanding of the mechanism involved in this process. In this study, we show that the surface oxidation state of cerium ions plays a very crucial role in different enzymatic activities, especially the oxidase mimetic activity by engineering nanoceria with three different surface Ce⁴⁺/Ce³⁺ compositions. Using DFT calculations combined with Bader charge analysis, it is demonstrated that stoichiometric ceria registers a higher oxidase mimetic activity than oxygen-deficient ceria with a low Ce⁴⁺/Ce³⁺ ratio due to a higher charge transfer from a substrate, 3,3',5,5' tetramethylbenzidine (TMB), to the ceria surface. We also show that the fluoride ions can significantly increase the charge transfer from the TMB surface to ceria irrespective of the surface Ce⁴⁺/Ce³⁺ ratio. Using this knowledge, we first compare the fluoride sensing properties of nanoceria with high Ce⁴⁺ and mixed Ce⁴⁺/Ce³⁺ oxidation states and further demonstrate that the linear detection range of fluoride ions can be extended to 1-10 ppm for nanoceria with mixed oxidation states. Then, we also demonstrate an assay for fluoride assisted detection of glutathione, an antioxidant with elevated levels during cancer, using nanoceria with a high surface Ce⁴⁺/Ce³⁺ ratio. The addition of fluoride ions in this assay allows the detection of glutathione in the linear range of 2.5-50 ppm with a limit of detection (LOD) of 3.8 ppm. These studies not only underpin the role of the surface Ce⁴⁺/Ce³⁺ ratio in tuning the fluoride assisted boost in the oxidase mimetic activity of nanoceria but also its strategic application in designing better colourimetric assays.

Impact of Foliar Application of ZnO and Fe3O4 Nanoparticles on Seed Yield and Physio-Biochemical Parameters of Cucumber (Cucumis sativus L.) Seed under Open Field and Protected Environment vis a vis during Seed Germination

Nutritionally rich cucumber seeds remain in demand in the agricultural, health and cosmetic sectors as they are essential for a successful crop stand establishment and seed-based products. However, the production of cucumber seeds is impeded by source limitation and nutrient deficiency. The foliar application of micronutrients can supplement this deficiency and overcome the physiological setback. An experiment was undertaken to compare the impacts of the foliar application of Fe and Zn, as nanoparticles and fertilizers, on the yield and seed quality of cucumber under open and protected environments. A foliar spray of nano-ZnO (ZnNPs) and nano-Fe₃O₄ (FeNPs) at 100, 200 and 300 mg L^-1, as well as ZnSO₄ and FeSO₄ as fertilizer (0.5%), was conducted at the vegetative stage and pre- and post-flowering stages. The NPs had a greater efficacy in an open field than in the protected (naturally ventilated poly house) environment. The application of both NPs increased seed yield (51.7-52.2%), total chlorophyll content (15.9-17.3%) and concentration of Zn and Fe in the fruit and the seed, by 2.0-58.5% and 5.0-30.5%, respectively. A significant increase in starch, soluble proteins, soluble sugars and oil content was observed in the seeds from the NP treated plants. NP treatment also enhanced the germination-related parameters, such as percent germination (16.8-17.0%), rate of germination (18.0-22.2%) and seedling vigor (59.8-72.6%). The biochemical characterization showed a significant improvement in the seed water uptake and the activity of hydrolytic enzymes (amylase and protease) in the germinating seed. The involvement of reactive oxygen species (superoxide anion and hydrogen peroxide) and antioxidant enzymes (Superoxide dismutase, Catalase and Peroxidase) in the germination process was indicated by an increase in their activities in the seeds from NP treated plants. Hence, the study proposes the potential benefit of the foliar application of 300 mg L^-1 ZnNPs and 200 mg L^-1 FeNPs at crucial stages of plant growth to improve the yield and seed quality in cucumbers.

Seed Priming with ZnO and Fe3O4 Nanoparticles Alleviate the Lead Toxicity in Basella alba L. through Reduced Lead Uptake and Regulation of ROS

The increased lead (Pb) content in the environment has an impact on all living beings, including plant growth and quality. The present study aims to investigate the protective roles of zinc (Zn)- and iron (Fe)- nanoparticles (NPs) in alleviating stress symptoms caused by lead (Pb) exposure in Basella alba seedlings. For this purpose, 15 different treatment combinations of seed priming with two NPs at 0 and 200 mg L−1, and five Pb levels (0, 4, 8, 15, 20 mM) were chosen. Pb stress (20 mM) was found to reduce seed germination by 72.8% and seedling growth, particularly root length, by 92% when compared to the control. Under different Pb concentrations, seed priming with ZnNPs (200 mg L−1) and FeNPs (200 mg L−1) increased seed germination by 34.7% and 54.9%, respectively, and root length by 152.9% and 252.9%, respectively. In 20 mM Pb stress, NPs primed seedling showed decrease in Pb content by 33.7% with ZnNPs and 32.6% with FeNPs. Increased Pb stress resulted in increased reactive oxygen species (ROS) generation (H2O2) and lipid peroxidation (MDA) compared to non-Pb stressed seedlings. However, increased antioxidants in the NPs treatments such as SOD, CAT, POD and proline content, scavenged these ROS. Considering all the parameters under study, priming alleviated Pb stress in the following order: FeNPs > ZnNPs > hydropriming > control. To summarise, seed priming with Zn- and Fe-NPs has the potential to alleviate Pb toxicity via reduced Pb uptake, ROS generation and lipid peroxidation as well as increased proline content and activation of antioxidant enzymatic system.

Modular configurations of living biomaterials incorporating nano-based artificial mediators and synthetic biology to improve bioelectrocatalytic performance: A review

Currently, the industrial application of bioelectrochemical systems (BESs) that are incubated with natural electrochemically active microbes (EABs) is limited due to inefficient extracellular electron transfer (EET) by natural EABs. Notably, recent studies have identified several novel living biomaterials comprising highly efficient electron transfer systems allowing unparalleled proficiency of energy conversion. Introduction of these biomaterials into BESs could fundamentally increase their utilization for a wide range of applications. This review provides a comprehensive assessment of recent advancements in the design of living biomaterials that can be exploited to enhance bioelectrocatalytic performance. Further, modular configurations of abiotic and biotic components promise a powerful enhancement through integration of nano-based artificial mediators and synthetic biology. Herein, recent advancements in BESs are synthesized and assessed, including heterojunctions between conductive nanomaterials and EABs, in-situ hybrid self-assembly of EABs and nano-sized semiconductors, cytoprotection in biohybrids, synthetic biological modifications of EABs and electroactive biofilms. Since living biomaterials comprise a broad range of disciplines, such as molecular biology, electrochemistry and material sciences, full integration of technological advances applied in an interdisciplinary framework will greatly enhance/advance the utility and novelty of BESs. Overall, emerging fundamental knowledge concerning living biomaterials provides a powerful opportunity to markedly boost EET efficiency and facilitate the industrial application of BESs to meet global sustainability challenges/goals.

Ultrasmall Gold Nanoclusters-Enabled Fabrication of Ultrafine Gold Aerogels as Novel Self-Supported Nanozymes

Metal aerogels represent an emerging type of functional porous materials with promising applications in diverse fields, but the fabrication of metal aerogels with specific structure and property still remains a challenge. Here, the authors report a new approach to fabricate metal aerogels by using ultrasmall metal nanoclusters (NCs) as functional building blocks. By taking D-penicillamine-stabilized gold NCs (AuNCs) with a diameter of 1.4 nm as an example, Au aerogels with ultrafine ligament size (3.5 nm) and good enzyme-mimic properties are synthesized. Detailed characterization shows that the obtained Au aerogels possess typical 3D self-supported porous network structure with high gold purity and surface area. Time-lapse spectroscopic and microscopic monitoring of the gelation process reveal that these ultrasmall AuNCs first grow into large nanoparticles before fusion into nanowire networks, during which both pH and the precursor concentration are identified to be the determining factor. Owing to their highly porous structure and abundant metal nodes, these self-supported Au aerogels display excellent peroxidase-like properties. This work provides a strategy for fabricating advanced metal aerogels by taking ultrasmall-sized metal NCs as building blocks, which also opens new avenues for engineering the structure and properties of metal aerogels for further advancing their applications.

DiZyme: Open-Access Expandable Resource for Quantitative Prediction of Nanozyme Catalytic Activity

Enzymes suffer from high cost, complex purification, and low stability. Development of low-cost artificial enzymes of comparative or higher effectiveness is desired. Given its complexity, it is desired to presume their activities prior to experiments. While computational approaches demonstrate success in modeling nanozyme activities, they require assumptions about the system to be made. Machine learning (ML) is an alternative approach towards data-driven material property prediction achieving high performance even on multicomponent complex systems. Despite the growing demand for customized nanozymes, there is no open access nanozyme database. Here, a user-friendly expandable database of >300 existing inorganic nanozymes is developed by data collection from >100 articles. Data analysis is performed to reveal the features responsible for catalytic activities of nanozymes, and new descriptors are proposed for its ML-assisted prediction. A random forest regression (RFR) model for evaluation of nanozyme peroxidase activity is developed and optimized by correlation-based feature selection and hyperparameter tuning, achieving performance up to R²  = 0.796 for K_cat and R²  = 0.627 for K_m . Experiment-confirmed unknown nanozyme activity prediction is also demonstrated. Moreover, the DiZyme expandable, open-access resource containing the database, predictive algorithm, and visualization tool is developed to boost novel nanozyme discovery worldwide (https://dizyme.net).

Advances with metal oxide-based nanoparticles as MDR metastatic breast cancer therapeutics and diagnostics

Metal oxide nanoparticles have attracted increased attention due to their emerging applications in cancer detection and therapy. This study envisioned to highlight the great potential of metal oxide NPs due to their interesting properties including high payload, response to magnetic field, affluence of surface modification to overcome biological barriers, and biocompatibility. Mammogram, ultrasound, X-ray computed tomography (CT), MRI, positron emission tomography (PET), optical or fluorescence imaging are used for breast imaging. Drug-loaded metal oxide nanoparticle delivered to the breast cancer cells leads to higher drug uptake. Thus, enhanced the cytotoxicity to target cells compared to free drug. The drug loaded metal oxide nanoparticle formulations hold great promise to enhance efficacy of breast cancer therapy including multidrug resistant (MDR) and metastatic breast cancers. Various metal oxides including magnetic metal oxides and magnetosomes are of current interests to explore cancer drug delivery and diagnostic efficacy especially for metastatic breast cancer. Metal oxide-based nanocarrier formulations are promising for their usage in drug delivery and release to breast cancer cells, cancer diagnosis and their clinical translations.

Biomarker targeted therapy approaches for TNBC using metal oxide-based NPs are highly effective and promising.

Recent advances in the protective role of metallic nanoparticles in red blood cells

The interaction of nanoparticles with the biological system has increased with the increasing popularity of nanomedicines. Red blood cells (RBCs) are very sensitive, and abundant cells in the blood. They are highly prone to oxidative damage due to constant interaction with oxygen itself, foreign particles in the blood, and the lack of repair mechanism. The cell membrane of RBCs undergoes lipid peroxidation, protein oxidation, and heme degradation which results in altered membrane permeability, changes in the morphology, and functioning of RBCs. The nanoparticles induce oxidative stress, hemolysis, morphological changes, membrane deformability, and alterations in hemoglobin structure in RBCs. In this review, the effects of metallic nanoparticles and their modifications on the physiology, and life span of RBCs are discussed. The detailed analysis of the antioxidant enzymes-like activity of metal nanoparticles is expected to highlight the beneficial use of these metal nanoparticles in RBCs against oxidative stress and the development of new biosafe nanodrugs.

Tuning the enzyme-like activities of cerium oxide nanoparticles using triethyl phosphite ligand

Cerium oxide nanoparticles (CeNPs) depict excellent in vitro and in vivo antioxidant properties, determined by the redox switching of surface cerium ions between its two oxidation states (Ce3+ and Ce4+)....

Nanozymes in Point-of-Care Diagnosis: An Emerging Futuristic Approach for Biosensing

Nanomaterial-based artificial enzymes (or nanozymes) have attracted great attention in the past few years owing to their capability not only to mimic functionality but also to overcome the inherent drawbacks of the natural enzymes. Numerous advantages of nanozymes such as diverse enzyme-mimicking activities, low cost, high stability, robustness, unique surface chemistry, and ease of surface tunability and biocompatibility have allowed their integration in a wide range of biosensing applications. Several metal, metal oxide, metal-organic framework-based nanozymes have been exploited for the development of biosensing systems, which present the potential for point-of-care analysis. To highlight recent progress in the field, in this review, more than 260 research articles are discussed systematically with suitable recent examples, elucidating the role of nanozymes to reinforce, miniaturize, and improve the performance of point-of-care diagnostics addressing the ASSURED (affordable, sensitive, specific, user-friendly, rapid and robust, equipment-free and deliverable to the end user) criteria formulated by World Health Organization. The review reveals that many biosensing strategies such as electrochemical, colorimetric, fluorescent, and immunological sensors required to achieve the ASSURED standards can be implemented by using enzyme-mimicking activities of nanomaterials as signal producing components. However, basic system functionality is still lacking. Since the enzyme-mimicking properties of the nanomaterials are dictated by their size, shape, composition, surface charge, surface chemistry as well as external parameters such as pH or temperature, these factors play a crucial role in the design and function of nanozyme-based point-of-care diagnostics. Therefore, it requires a deliberate exertion to integrate various parameters for truly ASSURED solutions to be realized. This review also discusses possible limitations and research gaps to provide readers a brief scenario of the emerging role of nanozymes in state-of-the-art POC diagnosis system development for futuristic biosensing applications.

Therapeutic Applications of Nanozymes in Chronic Inflammatory Diseases

Since the discovery of horseradish peroxidase-like activity of magnetite nanoparticles in 2007, many researchers have investigated different types of nanoparticles that show enzyme-like activities, namely, nanozymes. Nanozymes possess high efficiency, stability, and low production costs compared to natural enzymes. Thus, nanozymes have already been widely studied in various domains including medical science, food industry, chemical engineering, and agriculture. This review presents the utilization of nanozymes in medicine and focuses particularly on their therapeutic applications in chronic inflammatory diseases because of their antioxidant-like activity. Furthermore, the treatment of chronic inflammatory diseases with nanozymes of different materials was introduced emphatically.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

Biomedical applications of metal oxide nanoparticles in aging and age-associated diseases

Metal oxide nanoparticles are known to exhibit unique properties such as catalyzing the neutralization of superoxide anions, hydroxyl radicals, hydrogen peroxides and behave as antioxidant enzymes. Oxidative stress, damage and chronic inflammation are major causes and consequences of aging and age-associated disorders. With the increasing popularity of metal oxide nanoparticles, they have been applied in various age-related pathologies using their antioxidant property. Metal oxide nanoparticles have been used as diagnostic, therapeutic, and as theranostics. This review summarizes the applications of metal oxide nanoparticles in aging and age-associated disorders such as cardiovascular diseases, diabetes, cancer, neurodegenerative disorders. Oxidative stress plays a central role in the activation of inflammatory pathways, disturbing the mitochondrial function, decreasing the telomere length and leading the cell towards senescence or death. Oxidative damage is the common pathway in the progression of aging and related diseases. Metal oxide nanoparticles scavenge or precisely detect the generated reactive oxygen species, hence applied in both diagnostics and therapeutics.

Dual Enzyme-Like Performances of PLGA Grafted Maghemite Nanocrystals and Their Synergistic Chemo/Chemodynamic Treatment for Human Lung Adenocarcinoma A549 Cells

In recent years, the emergence of non-toxic but catalytically active inorganic nanoparticles has attracted great attention for cancer treatment, but the therapeutic effect has been affected by the limited reactive oxygen species in tumors. Therefore, the combination of chemotherapy and chemodynamic therapy is regarded as a promising therapeutic strategy. In this paper, we reported the preparation and bioactivity evaluation of poly(lactic acid-co-glycolic acid) (PLGA) grafted-γ-Fe₂O₃ nanoparticles with dual response of endogenous peroxidase and catalase like activities. Our hypothesis is that PLGAgrafted γ-Fe₂O₃ nanoparticles could be used as a drug delivery system for the anti-tumor drug doxorubicin to inhibit the growth of lung adenocarcinoma A549 cells; meanwhile, based on its mimic enzyme properties, this kind of nanoparticles could be combined with doxorubicin in the treatment of A549 cells. Our experimental results showed that the PLGAgrafted γ-Fe₂O₃ nanoparticles could simulate the activity of catalase and decompose hydrogen peroxide into H₂O and oxygen in neutral tumor microenvironment, thus reducing the oxidative damage caused by hydrogenperoxide to lung adenocarcinoma A549 cells. In acidic microenvironment, PLGA grafted γ-Fe₂O₃ nanoparticles could simulate the activity of peroxidase and effectively catalyze the decomposition of hydrogen peroxide to generate highly toxic hydroxyl radicals, which could cause the death of A549 cells. Furthermore, the synergistic effect of peroxidase-like activity of PLGA-grafted γ-Fe₂O₃ nanoparticles and doxorubicin could accelerate the apoptosisand destruction of A549 cells, thus enhancing the antitumor effect of doxorubicin-loaded PLGA-grafted γ-Fe₂O₃ nanoparticles. Therefore, this study provides an effective nanoplatform based on dual inorganic biomimetic nanozymes for the treatment of lung cancer.

The electrochemical immunosensor of the "signal on" strategy that activates MMoO4 (M = Co, Ni) peroxidase with Cu2+ to achieve ultrasensitive detection of CEA

A new type of ultrasensitive electrochemical immunosensor with "signal on" strategy was designed for quantitative detection of CEA. The sensing strategy design is based on the following principles: We use HMSNs-Cu²⁺@HA as the signal probe, the structure of HA is destroyed under acidic conditions, and the released Cu²⁺ activates the substrate material MMoO₄ (M = Co, Ni) Peroxidase activity initiates the reaction of catalytic H₂O₂ and realizes the "signal on" condition of electrical signals. This strategy has the following advantages: (1) HA coating of HMSNs-Cu²⁺ can prevent Cu²⁺ leakage, has good biocompatibility and can be connected with more antibodies. (2) The prepared sensor has the characteristics of high sensitivity and a low detection limit. When the electrode substrate was CoMoO₄, the detection range of the immunosensor was 0.01 pg/mL-40 ng/mL, and the detection limit was 0.0035 pg/mL (S/N = 3). This work innovatively applies the catalytic activity of metal ion-activated nanozymes in the detection of CEA, providing a new perspective for the monitoring and analysis of cancer markers.

L-Cysteine as an Irreversible Inhibitor of the Peroxidase-Mimic Catalytic Activity of 2-Dimensional Ni-Based Nanozymes

The ability to modulate the catalytic activity of inorganic nanozymes is of high interest. In particular, understanding the interactions of inhibitor molecules with nanozymes can bring them one step closer to the natural enzymes and has thus started to attract intense interest. To date, a few reversible inhibitors of the nanozyme activity have been reported. However, there are no reports of irreversible inhibitor molecules that can permanently inhibit the activity of nanozymes. In the current work, we show the ability of L-cysteine to act as an irreversible inhibitor to permanently block the nanozyme activity of 2-dimensional (2D) NiO nanosheets. Determination of the steady state kinetic parameters allowed us to obtain mechanistic insights into the catalytic inhibition process. Further, based on the irreversible catalytic inhibition capability of L-cysteine, we demonstrate a highly specific sensor for the detection of this biologically important molecule.

Polyoxometalate-Mediated Vacancy-Engineered Cerium Oxide Nanoparticles Exhibiting Controlled Biological Enzyme-Mimicking Activities

The biological enzyme-mimetic activity of cerium oxide nanoparticles (CeNPs) is well known to scavenge the reactive oxygen and nitrogen species in cell culture and animal models, imparting protection from the deleterious effects of oxidative and nitrosative stress. The superoxide dismutase (SOD)- and catalase-mimicking activity of CeNPs is reported to be controlled by the oxidation state of the surface "Ce" ions, where a high ratio of Ce^3+/4+ or Ce^4+/3+ has been considered for the displayed SOD and catalase-like activity, respectively. However, the redox behavior of CeNPs can be controlled by certain ligands that could offer changes in their enzyme-mimetic properties. Therefore, in this work, we have studied the enzyme-mimetic activities of CeNPs under the influence of polyoxometalates [phosphomolybdic acid (PMA) and phosphotungstic acid (PTA)], which are electron-dense molecules displaying quick and reversible multielectron redox reactions. Results revealed that the interaction of PMA with CeNPs results in the inhibition of the SOD-like activity; however, it has no impact on the catalase-like activity. Contrary to this, the interaction of PTA with CeNPs improved the SOD as well as catalase-like activities of CeNPs (3+), which generally do not exhibit catalase activity in the bare form. Although CeNPs (3+) did not show any peroxidase-like activity, CeNPs (4+) showed excellent activity, which was enhanced after the interaction with polyoxometalates. Further, the autoregeneration ability of CeNPs was found to be intact even after PTA or PMA interaction; however, the full catalytic activity was observed in the case of PTA but partially with PMA.

Magnetic nanocatalysts as multifunctional platforms in cancer therapy through the synthesis of anticancer drugs and facilitated Fenton reaction

Background

Heterocyclic compounds have always been used as a core portion in the development of anticancer drugs. However, there is a pressing need for developing inexpensive and simple alternatives to high-cost and complex chemical agents-based catalysts for large-scale production of heterocyclic compounds. Also, development of some smart platforms for cancer treatment based on nanoparticles (NPs) which facilitate Fenton reaction have been widely explored by different scientists. Magnetic NPs not only can serve as catalysts in the synthesis of heterocyclic compounds with potential anticancer properties, but also are widely used as smart agents in targeting cancer cells and inducing Fenton reactions.

Aim of Review

Therefore, in this review we aim to present an updated summary of the reports related to the main clinical or basic application and research progress of magnetic NPs in cancer as well as their application in the synthesis of heterocyclic compounds as potential anticancer drugs. Afterwards, specific tumor microenvironment (TME)-responsive magnetic nanocatalysts for cancer treatment through triggering Fenton-like reactions were surveyed. Finally, some ignored factors in the design of magnetic nanocatalysts- triggered Fenton-like reaction, challenges and future perspective of magnetic nanocatalysts-assisted synthesis of heterocyclic compounds and selective cancer therapy were discussed.Key Scientific Concepts of Review:This review may pave the way for well-organized translation of magnetic nanocatalysts in cancer therapy from the bench to the bedside.

Chemical design of nanozymes for biomedical applications

With the advancement of nanochemistry, artificial nanozymes with high catalytic stability, low manufacturing and storage cost, and greater design flexibility over natural enzymes, have emerged as a next-generation nanomedicine. The catalytic activity and selectivity of nanozymes can be readily controlled and optimized by the rational chemical design of nanomaterials. This review summarizes the various chemical approaches to regulate the catalytic activity and selectivity of nanozymes for biomedical applications. We focus on the in-depth correlation between the physicochemical characteristics and catalytic activities of nanozymes from several aspects, including regulating chemical composition, controlling morphology, altering the size, surface modification and self-assembly. Furthermore, the chemically designed nanozymes for various biomedical applications such as biosensing, infectious disease therapy, cancer therapy, neurodegenerative disease therapy and injury therapy, are briefly summarized. Finally, the current challenges and future perspectives of nanozymes are discussed from a chemistry point of view. STATEMENT OF SIGNIFICANCE: As a kind of nanomaterials that performs enzyme-like properties, nanozymes perform high catalytic stability, low manufacturing and storage cost, attracting the attention of researchers from various fields. Notably, chemically designed nanozymes with robust catalytic activity, tunable specificity and multi-functionalities are promising for biomedical applications. It's crucial to define the correlation between the physicochemical characteristics and catalytic activities of nanozymes. To help readers understand this rapidly expanding field, in this review, we summarize various chemical approaches that regulate the catalytic activity and selectivity of nanozymes together with the discussion of related mechanisms, followed by the introduction of diverse biomedical applications using these chemically well-designed nanozymes. Hopefully our review will bridge the chemical design and biomedical applications of nanozymes, supporting the extensive research on high-performance nanozymes.

Microwave assisted polyol process for time-saving synthesis of superparamagnetic nanoparticles and application in artificial mimic enzyme

A microwave assisted polyol process accomplished within 10 min was developed for synthesis of superparamagnetic Fe3O4 nanoparticles (MNPs) with well controlled size between 2 and 6 nm. Effects of reaction time and temperature on the size of the MNPs were investigated through transmission electronic microscope, x-ray diffraction pattern, thermogravimetic and magnetic analysis. The results indicates that longer reaction time or higher temperature lead to formation of MNPs with larger size. As a proof-of-concept, the MNPs were utilized as peroxidase and their activity was also investigated. Oxidation of typical substrate, 3, 3’, 5, 5’ -tetramethylbenzidine, can be proceeded by using the MNPs as artificial mimic enzyme. The MNPs display the maximal catalyzed activity under the optimum condition as pH = 3.5, 40 °C and concentration of TMB and H2O2 with 120 and 110 mmol·l−1, respectively. This work provides a new way for fast synthesis of MNPs, which are of potential application in artificial mimic enzyme.