Tuning the binding, release and cytotoxicity of hydrophobic drug by Bovine Serum Albumin nanoparticles: Influence of particle size

Diseleno-albumin, a native bio-inspired drug free therapeutic protein induces apoptosis in lung cancer cells through mitochondrial oxidation

Macromolecular therapeutic is the emerging concept in the fields of drug delivery and drug discovery. The present study reports the design and development of a serum albumin based macromolecular chemotherapeutic by conjugating bovine serum albumin (BSA) with 3,3'-diselenodipropionic acid (DSePA), a pharmacologically active organo-diselenide (R-Se-Se-R). The reaction conditions were optimised to achieve the controlled conjugation of BSA with DSePA without causing any significant alteration in its physico-chemical properties or secondary structure and crosslinking. The chemical characterisation of the reaction product through various spectroscopic techniques viz., FT-IR, Raman, XPS, AAS and MALDI-TOF-MS, established the conjugation of about ∼5 DSePA molecules per BSA molecule. The DSePA conjugated BSA (Se-Se-BSA) showed considerable stability in aqueous and lyophilized forms. The cytotoxicity studies by involving cell lines of cancerous and non-cancerous origins indicated that Se-Se-BSA selectively inhibited the proliferation of cancerous cells. The cellular uptake studies by physically labelling Se-Se-BSA with curcumin and following its intracellular fluorescence confirmed that uptake efficiency of Se-Se-BSA was almost similar to that of native BSA. Finally, studies on the mechanism of action of Se-Se-BSA in the A549 (lung adenocarcinoma) cells revealed that it induced mitochondrial ROS generation followed by mitochondrial dysfunction, activation of caspases and apoptosis. Together, these results demonstrate a bio-inspired approach of exploring diselenide (-Se-Se-) grafted serum albumin as the potential drug free therapeutic for anticancer application.

Quality by design fostered fabrication of cabazitaxel loaded pH-responsive Improved nanotherapeutics against prostate cancer

Cabazitaxel has been approved for the treatment of prostate cancer since 2010. However, its poor solubility and permeability pitfalls prevent its accumulation at the target site and promote severe adverse effects. About 90% of prostate cancer (PCa) patients suffer from bone metastasis. This advent reports the development of CBZ-loaded pH-responsive polydopamine nanoparticles (CBZ NP) against metastatic PCa cells. Quality by design (QbD) and multivariate analysis tools were employed for the optimization of CBZ NP. Amorphisation of CBZ along with metastatic microenvironment responsive release was observed thereby imparting spatial release and circumventing solubility pitfalls. CBZ NP retained its cytotoxic potential, with a significant increase in quantitative cellular uptake. Apoptotic markers observed from nuclear staining with elevated reactive oxygen species (ROS) and mitochondrial damage revealed by JC-1 staining demonstrated the efficacy of CBZ NP against PC-3 cells with good serum stability and diminished hemolysis. Cell cycle analysis revealed substantial S and G2/M phase arrest with enhancement in apoptosis was observed. Western blot studies revealed an elevation in caspase-1 and suppression in Bcl-2 indicating enhanced apoptosis compared to the control group. Substantial reduction in the diameter of 3D-Tumoroid and enhanced cell proliferation inhibition indicated the efficacy of CBZ NP in PCa. Thus, we conclude that CBZ NP could be a promising Nanotherapeutic approach for PCa.

Quality by design endorsed fabrication of Ibrutinib-loaded human serum albumin nanoparticles for the management of leukemia

Ibrutinib (IB), a BCS class II drug suffers from limited aqueous solubility, short half-life and extensive first-pass metabolism. In this project, we aim to recruit the desirable properties of human serum albumin (HSA) as a biocompatible drug carrier to circumvent nanoparticle-associated drawbacks. Quality by design and multivariate analysis was used for the optimization of IB-NPs. Cell culture studies performed on the K562 cell line revealed that the Ibrutinib-loaded HSA NPs demonstrated improved cytotoxicity, drug uptake, and reactive oxygen species generation in the leukemic K562 cells. Cell cycle analysis revealed G2/M phase retention of the leukemia cells. In vitro protein corona and hemolysis studies revealed superior hematological stability compared to the free drug which showed greater than 40 % hemolysis. In vitro drug release studies showed prolonged release profile till 48 h. Pharmacokinetic studies demonstrated a 2.31-fold increase in AUC and an increase in half-life from 0.43 h to 2.887 h with a tremendous reduction in clearance and elimination rate indicating prolonged systemic circulation which is desirable in leukemia. Hence, we conclude that IB-loaded albumin nanoparticles could be a promising approach for the management of leukemia.

State-of-the-art advances in nanocomposite and bio-nanocomposite polymeric materials: A comprehensive review

The modern eco-friendly materials used in research and innovation today consist of nanocomposites and bio-nanocomposite polymers. Their unique composite properties make them suitable for various industrial, medicinal, and energy applications. Bio-nanocomposite polymers are made of biopolymer matrices that have nanofillers dispersed throughout them. There are several types of fillers that can be added to polymers to enhance their quality, such as cellulose-based fillers, clay nanomaterials, carbon black, talc, carbon quantum dots, and many others. Biopolymer-based nanocomposites are considered a superior alternative to traditional materials as they reduce reliance on fossil fuels and promote the use of renewable resources. This review covers the current state-of-the-art in nanocomposite and bio-nanocomposite materials, focusing on ways to improve their features and the various applications they can be used for. The review article also investigates the utilization of diverse nanocomposites as a viable approach for developing bio-nanocomposites. It delves into the underlying principles that govern the synthesis of these materials and explores their prospective applications in the biomedical field, food packaging, sensing (Immunosensors), and energy storage devices. Lastly, the review discusses the future outlook and current challenges of these materials, with a focus on sustainability.

Recent developments in natural biopolymer based drug delivery systems

Targeted delivery of drug molecules to diseased sites is a great challenge in pharmaceutical and biomedical sciences. Fabrication of drug delivery systems (DDS) to target and/or diagnose sick cells is an effective means to achieve good therapeutic results along with a minimal toxicological impact on healthy cells. Biopolymers are becoming an important class of materials owing to their biodegradability, good compatibility, non-toxicity, non-immunogenicity, and long blood circulation time and high drug loading ratio for both macros as well as micro-sized drug molecules. This review summarizes the recent trends in biopolymer-based DDS, forecasting their broad future clinical applications. Cellulose chitosan, starch, silk fibroins, collagen, albumin, gelatin, alginate, agar, proteins and peptides have shown potential applications in DDS. A range of synthetic techniques have been reported to design the DDS and are discussed in the current study which is being successfully employed in ocular, dental, transdermal and intranasal delivery systems. Different formulations of DDS are also overviewed in this review article along with synthesis techniques employed for designing the DDS. The possibility of these biopolymer applications points to a new route for creating unique DDS with enhanced therapeutic qualities for scaling up creative formulations up to the clinical level.

Mussel inspired multifunctional bovine serum albumin (BSA) coatings loaded with Baicalein (BAI) to enhance osteogenesis and resist oxidative stress for potential application on implant

Oxidative stress is associated with most traumatic or pathological bone defects, and seriously affects the effect of implantation. The construction of antioxidative and osteogenic coatings is of great significance to accelerate the bone regeneration of implants. In this study, baicalein (BAI), a nature flavonoid drug, was loaded in bovine serum albumin (BSA) by desolvent method to prepare BAI-BSA composite protein, and tannic acid (TA)/BAI-BSA coatings were further built via layer by layer self-assembly technology. BAI-BSA possesses good biocompatibility that showed no cytotoxicity to osteoblasts and erythrocytes, and helps to enhance the activity of alkaline phosphatase (ALP) and promote the formation of osteogenic mineralized calcium nodules. After assembled with TA, BAI-BSA coating significantly promoted cell adhesion and in vitro osteogenic mineralization of MC3T3-E1. Moreover, BAI drug loading improved the antioxidative function of BSA coatings effectively. The scavenging rates of (TA/BAI-BSA-10)₄ for ABTS^+• and DPPH^• free radicals were 69.6 ± 16.1 % and 53.4 ± 2.4 %, respectively. At cellular level, the TA/BAI-BSA coating effectively inhibited the impact of oxidative stress on the oxidative damage of osteoblasts. The drug-loaded protein coatings possess both great antioxidative and osteogenic functions, which have important potential in the field of bone repair.

Recent Progress in Proteins-Based Micelles as Drug Delivery Carriers

Proteins-derived polymeric micelles have gained attention and revolutionized the biomedical field. Proteins are considered a favorable choice for developing micelles because of their biocompatibility, harmlessness, greater blood circulation and solubilization of poorly soluble drugs. They exhibit great potential in drug delivery systems as capable of controlled loading, distribution and function of loaded agents to the targeted sites within the body. Protein micelles successfully cross biological barriers and can be incorporated into various formulation designs employed in biomedical applications. This review emphasizes the recent advances of protein-based polymeric micelles for drug delivery to targeted sites of various diseases. Most studied protein-based micelles such as soy, gelatin, casein and collagen are discussed in detail, and their applications are highlighted. Finally, the future perspectives and forthcoming challenges for protein-based polymeric micelles have been reviewed with anticipated further advances.

Enhanced oral bioavailability from food protein nanoparticles: A mini review

The oral route is the most desirable drug administration path. The oral bioavailability is always compromised from the poor physicochemical and/or biopharmaceutical properties of the active pharmaceutical ingredients. Food protein nanoparticles show promise for oral drug delivery, with improved biosafety and cost-effectiveness compared to polymeric nanoparticles. More importantly, diverse food proteins provide "choice and variety" to meet the challenges faced by different drugs in oral delivery resulting from low solubility, poor permeability, and gastrointestinal stability. The abundance of hydroxyl, amino, and carboxyl groups in food proteins allows easy surface modification of the nanoparticles to impart unique functions. Albeit being in its infancy, food protein nanoparticles exhibit high capability to enhance oral bioavailability of a wide range of drugs from small molecules to biomacromolecules. Considering the rapid growth of the field, the achievements and mechanisms of food protein nanoparticles in enhancing oral bioavailability are reviewed. Factors affecting the performance of food protein nanoparticles are discussed with the purpose to inspire the development of food protein nanoparticle-based oral drug delivery systems.

The Loading of Epigallocatechin Gallate on Bovine Serum Albumin and Pullulan-Based Nanoparticles as Effective Antioxidant

Due to its poor stability and rapid metabolism, the biological activity and absorption of epigallocatechin gallate (EGCG) is limited. In this work, EGCG-loaded bovine serum albumin (BSA)/pullulan (PUL) nanoparticles (BPENs) were successfully fabricated via self-assembly. This assembly was driven by hydrogen bonding, which provided the desired EGCG loading efficiency, high stability, and a strong antioxidant capacity. The encapsulation efficiency of the BPENs was above 99.0%. BPENs have high antioxidant activity in vitro, and, in this study, their antioxidant capacity increased with an increase in the EGCG concentration. The in vitro release assays showed that the BPENs were released continuously over 6 h. The Fourier transform infrared spectra (FTIR) analysis indicated the presence of hydrogen bonding, hydrophobic interactions, and electrostatic interactions, which were the driving forces for the formation of the EGCG carrier nanoparticles. Furthermore, the transmission electron microscope (TEM) images demonstrated that the BSA/PUL-based nanoparticles (BPNs) and BPENs both exhibited regular spherical particles. In conclusion, BPENs are good delivery carriers for enhancing the stability and antioxidant activity of EGCG.

Gelatin-lecithin-F127 gel mediated self-assembly of curcumin vesicles for enhanced wound healing

Curcumin, a principal component of Curcuma longa, has a long history of being used topically for wound healing. However, poor aqueous solubility of curcumin leads to poor topical absorption. Recently, gelatin based gel has been reported to overcome this issue. However, the release of curcumin from gelatin gel in the bioavailable or easily absorbable form is still a challenge. The present study reports the development of a composite gel prepared from gelatin, F127 and lecithin using temperature dependant gelation and loading of curcumin within it. Notably, the composite gel facilitated the release of curcumin entrapped within vesicles of ~400 nm size. Further, the composite gel exhibited increase in the storage modulus or gel strength, stability, pore size and hydrophobicity as compared to only gelatin gel. Finally, wound healing assay in murine model indicated that curcumin delivered through composite gel showed a significantly faster healing as compared to that delivered through organic solvent. This was also validated by histopathological and biochemical analysis showing better epithelization and collagen synthesis in the group dressed with curcumin containing composite gel. In conclusion, composite gel facilitated the release of bioavailable or easily absorbable curcumin which in turn enhanced the wound healing.

Emerging prospects of protein/peptide-based nanoassemblies for drug delivery and vaccine development

Proteins have been widely used in the biomedical field because of their well-defined architecture, accurate molecular weight, excellent biocompatibility and biodegradability, and easy-to-functionalization. Inspired by the wisdom of nature, increasing proteins/peptides that possess self-assembling capabilities have been explored and designed to generate nanoassemblies with unique structure and function, including spatially organized conformation, passive and active targeting, stimuli-responsiveness, and high stability. These characteristics make protein/peptide-based nanoassembly an ideal platform for drug delivery and vaccine development. In this review, we focus on recent advances in subsistent protein/peptide-based nanoassemblies, including protein nanocages, virus-like particles, self-assemblable natural proteins, and self-assemblable artificial peptides. The origin and characteristics of various protein/peptide-based assemblies and their applications in drug delivery and vaccine development are summarized. In the end, the prospects and challenges are discussed for the further development of protein/peptide-based nanoassemblies.

Origins of Structural Elasticity in Metal-Phenolic Networks Probed by Super-Resolution Microscopy and Multiscale Simulations

Metal-phenolic networks (MPNs) are amorphous materials that can be used to engineer functional films and particles. A fundamental understanding of the heat-driven structural reorganization of MPNs can offer opportunities to rationally tune their properties (e.g., size, permeability, wettability, hydrophobicity) for applications such as drug delivery, sensing, and tissue engineering. Herein, we use a combination of single-molecule localization microscopy, theoretical electronic structure calculations, and all-atom molecular dynamics simulations to demonstrate that MPN plasticity is governed by both the inherent flexibility of the metal (Fe^III)-phenolic coordination center and the conformational elasticity of the phenolic building blocks (tannic acid, TA) that make up the metal-organic coordination complex. Thermal treatment (heating to 150 °C) of the flexible TA/Fe^III networks induces a considerable increase in the number of aromatic π-π interactions formed among TA moieties and leads to the formation of hydrophobic domains. In the case of MPN capsules, 15 min of heating induces structural rearrangements that cause the capsules to shrink (from ∼4 to ∼3 μm), resulting in a thicker (3-fold), less porous, and higher protein (e.g., bovine serum albumin) affinity MPN shell. In contrast, when a simple polyphenol such as gallic acid is complexed with Fe^III to form MPNs, rigid materials that are insensitive to temperature changes are obtained, and negligible structural rearrangement is observed upon heating. These findings are expected to facilitate the rational engineering of versatile TA-based MPN materials with tunable physiochemical properties for diverse applications.

Research progress on the biological modifications of implant materials in 3D printed intervertebral fusion cages

Anterior spine decompression and reconstruction with bone grafts and fusion is a routine spinal surgery. The intervertebral fusion cage can maintain intervertebral height and provide a bone graft window. Titanium fusion cages are the most widely used metal material in spinal clinical applications. However, there is a certain incidence of complications in clinical follow-ups, such as pseudoarticulation formation and implant displacement due to nonfusion of bone grafts in the cage. With the deepening research on metal materials, the properties of these materials have been developed from being biologically inert to having biological activity and biological functionalization, promoting adhesion, cell differentiation, and bone fusion. In addition, 3D printing, thin-film, active biological material, and 4D bioprinting technology are also being used in the biofunctionalization and intelligent advanced manufacturing processes of implant devices in the spine. This review focuses on the biofunctionalization of implant materials in 3D printed intervertebral fusion cages. The surface modifications of implant materials in metal endoscopy, material biocompatibility, and bioactive functionalizationare summarized. Furthermore, the prospects and challenges of the biofunctionalization of implant materials in spinal surgery are discussed. Fig.a.b.c.d.e.f.g As a pre-selected image for the cover, I really look forward to being selected. Special thanks to you for your comments.

Phenyl-substituted aminomethylene-bisphosphonates inhibit human P5C reductase and show antiproliferative activity against proline-hyperproducing tumour cells

In certain cancers, such as breast, prostate and some lung and skin cancers, the gene for the enzyme catalysing the second and last step in proline synthesis, δ1-pyrroline-5-carboxylate (P5C) reductase, has been found upregulated. This leads to a higher proline content that exacerbates the effects of the so-called proline-P5C cycle, with tumour cells effectively using this method to increase cell survival. If a method of reducing or inhibiting P5C reductase could be discovered, it would provide new means of treating cancer. To address this point, the effect of some phenyl-substituted derivatives of aminomethylene-bisphosphonic acid, previously found to interfere with the catalytic activity of plant and bacterial P5C reductases, was evaluated in vitro on the human isoform 1 (PYCR1), expressed in E. coli and affinity purified. The 3.5-dibromophenyl- and 3.5-dichlorophenyl-derivatives showed a remarkable effectiveness, with IC50 values lower than 1 µM and a mechanism of competitive type against both P5C and NADPH. The actual occurrence in vivo of enzyme inhibition was assessed on myelogenous erythroleukemic K562 and epithelial breast cancer MDA-MB-231 cell lines, whose growth was progressively impaired by concentrations of the dibromo derivative ranging from 10-6 to 10-4 M. Interestingly, growth inhibition was not relieved by the exogenous supply of proline, suggesting that the effect relies on the interference with the proline-P5C cycle, and not on proline starvation.

Tuning Net Charge in Aliphatic Polycarbonates Alters Solubility and Protein Complexation Behavior

A synthetic strategy yielded polyelectrolytes and polyampholytes with tunable net charge for complexation and protein binding. Organocatalytic ring-opening polymerizations yielded aliphatic polycarbonates that were functionalized with both carboxylate and ammonium side chains in a post-polymerization, radical-mediated thiol-ene reaction. Incorporating net charge into the polymer architecture altered the chain dimensions in phosphate buffered solution in a manner consistent with self-complexation and complexation behavior with model proteins. A net cationic polyampholyte with 5% of carboxylate side chains formed large clusters rather than small complexes with bovine serum albumin, while 50% carboxylate polyampholyte was insoluble. Overall, the aliphatic polycarbonates with varying net charge exhibited different macrophase solution behaviors when mixed with protein, where self-complexation appears to compete with protein binding and larger-scale complexation.

Balancing loading, cellular uptake, and toxicity of gelatin-pluronic nanocomposite for drug delivery: Influence of HLB of pluronic

In this study, pluronic stabilized gelatin nanocomposite of varying hydrophilic-lipophilic balance (HLB) were synthesized to study the effect of surface hydrophobicity on their cellular uptake and in turn the delivery of a model hydrophobic bioactive compound, curcumin (CUR). Notably, the variation in HLB from 22 to 8 did not cause much change in morphology (~spherical) and surface charge (~ -6.5 mV) while marginally reducing the size of nanocomposite from 165 ± 097 nm to 134 ± 074 nm. On contrary, nanocomposites exhibited a very significant increase in their numbers, hydrophobicity as well as CUR loading with decreasing HLB values (22-8) of pluronic. Further, the cellular uptake of CUR through pluronic-gelatin nanocomposites was studied in human lung carcinoma (A549) cells. The results indicated that cellular uptake of CUR through nanocomposites followed the order HLB 22 > HLB 18 > HLB 15 > HLB 8. This was also reflected in terms of the decrease in cytotoxicity of CUR through nanocomposite of HLB 8 as compared to that of HLB 22. Interestingly, bare nanocomposite of HLB 8 showed significantly higher cytotoxicity as compared to that of HLB 22. Together these results suggested that although higher hydrophobicity of the gelatin-pluronic nanocomposite facilitated higher entrapment of CUR, the carrier per se became toxic due to its hydrophobic interaction with lipid bilayer of plasma membrane. Thus, HLB parameter is very important in designing hybrid nanocomposite systems involving protein and pluronic to ensure both bio-compatibility of the carrier and the optimum cellular delivery of the pay load.

A Promising Anticancer Agent Dimethoxycurcumin: Aspects of Pharmacokinetics, Efficacy, Mechanism, and Nanoformulation for Drug Delivery

Curcumin is a well-known anticancer natural product with various significant bioactivities that has been well documented, but its widespread use is mainly hindered by insufficient ADME properties such as poor solubility and low metabolic stability. Dimethoxycurcumin (DiMC) is a kind of lipophilic compound derived from curcumin that maintains its anticancer potency and has greatly improved systematic bioavailability. Therefore, DiMC is regarded as a promising plant-derived anticancer agent that deserves to be well developed. Herein, we concentrate on the published work by those from original research groups concerned with the pharmacokinetics, efficacy, and mechanism of DiMC involved in the treatment of various tumors, as well as the nanoformulations for effective drug delivery.

Genistein loaded in self-assembled bovine serum albumin nanovehicles and their effects on mouse mammary adenocarcinoma cells

Antitumor activity of plant-derived flavonoids has been researched during recent decades. Among them, genistein (Gen) stands out for showing cytotoxic activity against breast cancer cells. However, its low water solubility, limited bioavailability, and fast metabolism hinder its administration in chemopreventive therapies. To overcome these obstacles, bovine serum albumin nanovehicles (BSAnp) were obtained by a heat-induced self-assembly process at 70 °C and two aqueous medium pH (9.0 and 11.0) and assayed for the Gen loading. Thus, in this work, Gen loading in BSAnp was studied by spectroscopic techniques and compared with the one obtained for its stereoisomer, chrysin (Chrys). Results revealed that Gen binds to BSAnp via fluorescence quenching mechanism forming inclusion complexes. Compared to Chrys, Gen binding to BSAnp involved more molecules, whereas the association constant was similar for both flavonoids. In general, flavonoid loading in protein systems was strongly affected by the combined effects of BSA conformational state (native vs. aggregated), nanovehicle size, and flavonoid chemical structure. To evaluate the antitumor properties freeze-dried powders were obtained, and they were assayed in vitro after reconstitution by XTT technique and Annexin V-FITC flow cytometry against mouse mammary adenocarcinoma F3II cells. Gen-loaded BSAnp produced a significant decrease in cell viability compared with unloaded BSAnp systems, being the highest cytotoxic effects found for the lowest sized Gen-loaded BSAnp. The leading cytotoxicity mechanism for Gen-loaded systems was apoptosis. Summarizing, it can be concluded that BSAnp constitute versatile nanovehicles for potential flavonoid incorporation in pharmaceutical and nutraceutical matrices.

In silico and experimental studies of bovine serum albumin-encapsulated carbenoxolone nanoparticles with reduced cytotoxicity

Carbenoxolone (CBX) is a semi-synthetic plant derivative with pleiotropic pharmacological properties like anti-microbial and anti-inflammatory activities. Though approved for treatment of gastric ulcers, its use is limited due to adverse effects such as cytotoxicity. Bovine serum albumin (BSA) is a natural, non-toxic protein with high water-solubility and low immunogenicity, and is widely used as a nanocarrier for targeted drug delivery. In the present study, controlled release BSA-CBX nanoparticles (NPs) were synthesized by desolvation method to reduce drug cytotoxicity. These NPs showed desirable physicochemical properties such as particle size (∼240 nm), polydispersity index (0.08), zeta potential (-7.12 mV), drug encapsulation efficiency (72 %), and were stable for at least 3 months at room temperature. The drug was released from the BSA-CBX NPs in a biphasic manner in vitro following non-fickian diffusion. Computational analysis determined that the binding between BSA and CBX occurred through van der Waals forces, hydrophobic interactions, and hydrogen bonds with 93 % steric stability. Further, the cytotoxic assays demonstrated ∼1.8-4.9-fold reduction in cytotoxicity using three human cell lines (A549, MCF-7, and U-87). Subsequently, this novel CBX formulation with BSA as an efficient carrier can potentially be used for diverse biomedical applications.

Towards Green Nanoscience: From extraction to nanoformulation

The use of nanotechnology has revolutionized many biotechnological sectors, from bioengineering to medicine, passing through food and cosmetic fields. However, their clinic and industrial application has been into the spotlight due to their safety risk and related side effects. As a result, Green Nanoscience/Nanotechnology emerged as a strategy to prevent any associated nanotoxicity, via implementation of sustainable processes across the whole lifecycle of nanoformulation. Notwithstanding its success across inorganic nanoparticles, the green concept for organic nanoparticle elaboration is still at its infancy. This, coupled with the organic nanoparticles being the most commonly used in biomedicine, highlights the need to implement specific green principles for their elaboration. In this review, we will discuss the possible green routes for the proper design of organic nanoparticles under the umbrella of Green Nanoscience: from the extraction of nanomaterials and active compounds to their final nanoformulation.

Bio-surface coated titanium scaffolds with cancellous bone-like biomimetic structure for enhanced bone tissue regeneration

In view of the fact that titanium (Ti)-based implants still face the problem of loosening and failure of the implants caused by the slow biological response, the low osseointegration rate and the implant bacterial infection in clinical application, we designed a cancellous bone-like biomimetic Ti scaffold using the template accumulated by sugar spheres as a pore-forming agent. And based on a modified surface mineralization process and mussel-like adhesion mechanism, a silicon-doped calcium phosphate composite coating (Van-pBNPs/pep@pSiCaP) with Vancomycin (Van)-loaded polydopamine (pDA)-modified albumin nanoparticles (Van-pBNPs) and cell adhesion peptides (GFOGER) was constructed on the surface of Ti scaffold for mimicking the extracellular matrix (ECM) microenvironment of natural bone matrix to induce greater tissue regeneration. The in vitro study demonstrated that this porous Ti scaffold with functional bio-surface could distinctly facilitate cell early adhesion and spreading, and activate the expression of α2β1 integrin receptor on the cell membrane through promoting the formation of focal adhesions (FAs) in bone marrow stromal cells (BMSCs), thus mediating greater osteogenic cell differentiation. And it could also effectively inhibit the adhesion and growth of Staphylococcus epidermidis, exhibiting good antibacterial properties. Moreover, the Van-pBNPs/pep@pSiCaP-Ti scaffolds showed enhanced in vivo bone-forming ability due to the contributions of bioactive chemical components and the natural cancellous bone-like macrostructure. This work offers a promising structural and functional bio-inspired strategy for designing metal implants with desirable ability of osteoinduction synergistically with antibacterial efficacy for promoting bone regeneration and infection prevention simultaneously. STATEMENT OF SIGNIFICANCE: This manuscript describes a new method for making porous Ti scaffolds with a natural cancellous bone-like structure. Besides, a functional bio-surface was constructed on the bionic structure, mimicking some of the functions of the collagen-rich organic matrix and inorganic CaP nanocrystallites of native ECM of bone in chemical components and biological activities. This interconnected inter-pore opening structure encouraged the migration of cells among open macro-pores within the scaffold. In addition, the functionalized surface not only improved early cell adhesion, spreading, stimulated greater osteogenic differentiation of bone-forming cells, but also endowed the scaffold with excellent antibacterial effect. The biomimetic metal implant with multiple biomedical functions designed in this study has a great clinical application potential. This study represents a feasible method for the preparation of biomimetic structure of metal implants and the improvement of their surface biological activity.

The enhancement of N-acetylcysteine on intestinal absorption and oral bioavailability of hydrophobic curcumin

To solve the low oral bioavailability of curcumin (CUR) due to the limits imposed by gastrointestinal (GI) barrier, we constructed a nano delivery system to evaluate the effect of N-acetyl-L-cysteine (NAC) on intestinal absorption and oral bioavailability of CUR. CUR was first encapsulated in bovine serum albumin nanoparticles (CUR-BSA-NPs), and then was further modified by NAC (CUR-NBSA-NPs). In situ single-pass intestinal perfusion assay demonstrated that CUR-NBSA-NPs displayed excellent permeation and absorption rates in GI tract. Additionally, the distribution study in GI tract revealed that more NBSA-NPs were absorbed by intestinal segments compared to the BSA nanoparticles. Plasma concentration-time curves in rats showed that AUC_0-t, C_max and MRT_0-t values of CUR after oral administration of CUR-NBSA-NPs were increased to 3.25-, 4.42-, and 1.43-fold compared with that of CUR suspension. In conclusion, NAC promotes oral absorption of CUR, thereby improving its oral bioavailability.

Tuning the pharmacokinetics and efficacy of irinotecan (IRI) loaded gelatin nanoparticles through folate conjugation

Gelatin based nanocarriers have major limitation of shorter circulation half-life (t_1/2). Present study addressed this issue by conjugating gelatin with folate followed by nanoprecipitation in presence of polysorbate 80 to form folate attached gelatin nanoparticles (GNP-F). The folic acid was conjugated with gelatin through the formation of amide linkage with a maximum conjugation yield of ~69%. Cryo-SEM analysis indicated that unconjugated gelatin nanoparticles (GNP) and GNP-F were spherical of nearly identical size of ~200 nm. The irinotecan (IRI)-loading efficiency estimated for IRI-GNP and IRI-GNP-F was 6.6 ± 0.42% and 11.2 ± 0.73% respectively and both formulations showed faster release of IRI at acidic pH (~5) than at physiological pH (~7). Further IRI-GNP-F demonstrated significantly higher cytotoxicity in folate receptor (FR)-positive HeLa cells than the unconjugated IRI-GNP nanoparticles confirming active targeting. Subsequently the antitumor activity of above formulations in FR-positive fibrosarcoma (syngeneic) tumor-bearing mice followed the order of IRI-GNP-F > IRI-GNP > free IRI. The pharmacokinetic evaluation of IRI-GNP and IRI-GNP-F revealed that encapsulation of IRI within GNP without folate improved its plasma maximum concentration (C_max). However, folate conjugation of GNP remarkably improved the t_1/2 of IRI. Taken together, folate as a targeting ligand modulates the pharmacokinetic property of IRI loaded GNP to favor active verses passive targeting.

Interaction of a Model Hydrophobic Drug Dimethylcurcumin with Albumin Nanoparticles

The aim of present study was to investigate the binding interactions of a model hydrophobic molecule, dimethylcurcumin (DMC) with nanoparticle form of bovine serum albumin (BSA) using fluorescence spectroscopy techniques. For this, BSA nanoparticles (size = 62.0 ± 3.5 nm, molecular weight = 11,243 ± 3445 kD) prepared by thermal denaturation method was mixed with DMC in solution and monitored for fluorescence emission of tryptophan (Trp) residue as well as DMC separately. The emission maximum of DMC in nanoparticles form exhibited more blue sift and quenched the excited state of tryptophan (Trp) by six fold higher than in the native form of BSA. By analyzing Trp fluorescence, the mean binding constant (K) estimated for the interaction of DMC with native and nanoparticles forms of BSA was 2.7 ± 0.4 × 10⁴ M^-1 and 1.5 ± 0.5 × 10⁵ M^-1 respectively. Together these results suggested that DMC experienced a more rigid environment in nanoparticles than in native form of BSA. Additionally the above determined K values were in agreement with those reported previously by absorption techniques. Further direct energy transfer was observed between Trp and DMC, using which the distance (r) calculated between them was 28.25 ± 0.27 Ǻ in BSA native. Similar analysis involving BSA nanoparticle and DMC revealed a distance of 24.25 ± 1.05 Ǻ between the hydrophobic core and the ligand. Finally interaction of DMC with BSA was validated through molecular docking studies, which indicated sub-domain IIA as the binding site of DMC. Thus it is concluded that intrinsic fluorescence of protein can be utilized to study the interaction of its different physical forms with any hydrophobic ligand.

Improvement of efficacy and decrement cytotoxicity of oxaliplatin anticancer drug using bovine serum albumin nanoparticles: synthesis, characterisation and release behaviour

To sustained release of an anticancer drug, oxaliplatin (OX), a non-toxic and biocompatible nanocarrier based on bovine serum albumin (BSA) were synthesised by desolvation method and characterised using Fourier-transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and dynamic light scattering. The results showed that the BSA nanoparticles (BSANPs) with a mean magnitude of 187.9 ± 1.2 nm have spherical morphology with a smooth surface and a uniform distribution. Furthermore, OX was loaded onto the BSANPs and the loading was confirmed by FTIR, AFM and FESEM techniques. The percentage of encapsulation efficiency and drug loading were determined by absorption spectroscopy (UV-vis). The drug release studies showed that release of OX from BSANPs exhibited slower release rate. However, the release kinetics followed the first-order kinetic for both of them with the non-Fickian release behaviour. The electrochemical analysis showed stability of OX loaded onto the BSANPs (OX@BSANPs) and confirmed the diffusion mechanism. Furthermore, the results of MTT assay revealed increasing of normal cell viability and cancer cell death in the OX@BSANPs compared to only OX. It was shown that the BSANPs could be safely used as a biocompatible nanocarrier for the sustained release of OX.

Preparation of a size selective nanocomposite through temperature assisted co-assembly of gelatin and pluronic F127 for passive targeting of doxorubicin

The study demonstrates the importance of the weight ratio of F127 and gelatin in forming size selective nanoconjugate through a thermal relaxation approach and its potential as an efficient drug delivery system of doxorubicin with reduced side effects.

Co-delivery of Cyclopamine and Doxorubicin Mediated by Bovine Serum Albumin Nanoparticles Reverses Doxorubicin Resistance in Breast Cancer by Down-regulating P-glycoprotein Expression

Combination chemotherapy is considered to be one of the most effective treatments for breast cancer by reducing the emergence of drug resistance. In this study, a novel drug delivery system based on bovine serum albumin nanoparticles (BSA NPs) was successfully developed. Doxorubicin (DOX) and cyclopamine (CYC), a potential anti-cancer agent that inhibits the hedgehog signaling pathway were entrapped into BSA NPs through electrostatic interactions and hydrophobic interactions, respectively. Rather than simple combination of two different chemotherapeutics, the CYC also increased the intracellular DOX accumulation by decreasing the expression of P-glycoprotein (P-gp), which could thus reverse the DOX resistance. Tumor-targeting property of nanoparticles was the prerequisite for its further application. Interestingly, retention of fluorescently-labeled particles in vivo indicated that the dual-drug-loaded BSA NPs could not only target the primary tumors, but also target the metastatic lymph nodes, which would simultaneously inhibit the tumor growth and distant metastasis. Taken together, this study provides a promising strategy for co-delivery of drugs, tumor and metastatic lymph node targeting, and DOX resistance reversing in breast cancer chemotherapy.

Drug Exchange between Albumin Nanoparticles and Erythrocyte Membranes

The effects of thioridazine (TDZ) and chlorpromazine (CPZ) and bovine serum albumin nanoparticles (BSA-NPs) on erythrocyte membranes have been investigated. Two kinds of hemolytic assays were used; hemolysis under hypotonic conditions and hemolysis in physiological conditions. Under hypotonic conditions for 50% hemolysis, both TDZ and CPZ have a biphasic effect on membranes; namely, stabilization at low concentrations and destabilization after reaching a critical concentration. In physiological conditions, there are other critical concentrations above which both drugs hemolyse the erythrocites. In each case, the critical concentrations of TDZ are lower than those of CPZ, which is consistent with the ratio of their partition coefficients. When BSA-NPs are added to the erythrocyte suspension simultaneously with the drugs, the critical concentrations increase for both drugs. The effect is due to the incorporation of a portion of drug substances into the BSA-nanoparticles, which consequently leads to the decrease of the active drug concentrations in the erythrocyte suspension medium. Similar values of the critical concentrations are found when the BSA-NPs are loaded with the drugs before their addition to the erythrocyte suspension in which case the events of the partition are: desorption of the drug from BSA-NPs, diffusion through the medium, and adsorption on erythrocyte membranes. This result suggests that the drugs are not influenced by the processes of adsorption and desorption onto and out of the BSA-NPs, and that the use of BSA-NPs as drug transporters would allow intravenous administration of higher doses of the drug without the risk of erythrocyte hemolysis.

Diketo modification of curcumin affects its interaction with human serum albumin

Curcumin isoxazole (CI) and Curcumin pyrazole (CP), the diketo modified derivatives of Curcumin (CU) are metabolically more stable and are being explored for pharmacological properties. One of the requirements in such activities is their interaction with circulatory proteins like human serum albumin (HSA). To understand this, the interactions of CI and CP with HSA have been investigated employing absorption and fluorescence spectroscopy and the results are compared with that of CU. The respective binding constants of CP, CI and CU with HSA were estimated to be 9.3×10⁵, 8.4×10⁵ and 2.5×10⁵M^-1, which decreased with increasing salt concentration in the medium. The extent of decrease in the binding constant was the highest in CP followed by CI and CU. This revealed that along with hydrophobic interaction other binding modes like electrostatic interactions operate between CP/CI/CU with HSA. Fluorescence quenching studies of HSA with these compounds suggested that both static and dynamic quenching mechanisms operate, where the contribution of static quenching is higher for CP and CI than that for CU. From fluorescence resonance energy transfer studies, the binding site of CU, CI and CP was found to be in domain IIA of HSA. CU was found to bind in closer proximity with Trp214 as compared to CI and CP and the same was responsible for efficient energy transfer and the same was also established by fluorescence anisotropy measurements. Furthermore docking simulation complemented the experimental observation, where both electrostatic as well as hydrophobic interactions were indicated between HSA and CP, CI and CU. This study is useful in designing more stable CU derivatives having suitable binding properties with proteins like HSA.