Delivery of curcumin using a zein-xanthan gum nanocomplex: Fabrication, characterization, and in vitro release properties

Fabrication and characterization of oxidized starch-xanthan gum composite nanoparticles with efficient emulsifying properties

This study involved the preparation of nanoparticles by combining oxidized starch (OS) with xanthan gum (XG), and emulsions were prepared from this nanoparticle. The physical and chemical characteristics, as well as the emulsification properties of oxidized starch-xanthan gum composite nanoparticles (OGNP), were analyzed. The findings revealed that the OGNP retained spherical shape after the addition of XG, although their diameter increased from approximately 50-150 to 200-400 nm. Zeta potential decreased with XG content. Moreover, emulsions prepared from OGNP exhibited outstanding thermal stability, also showing enhanced storage stability. In addition, emulsions had different rheological properties at different pH values. The apparent viscosity and shear stress of emulsions under alkaline conditions were lower than that of neutral conditions. NaCl increased the apparent viscosity of OGNP-stabilized emulsions while reducing their thermal stability. The nanoparticles prepared in this study have efficient emulsification properties and can extend the application of OS.

Characterization of pectin-zein nanoparticles encapsulating tanshinone: Antioxidant activity, controlled release properties, physicochemical stability to environmental stresses

Tanshinone compounds, natural antioxidants found in the roots of Salvia subg Perovskia plants, offer various health benefits and can serve as natural food additives, replacing synthetic antioxidants. In this study, the nanoparticles were created using the antisolvent method, which were then evaluated for their antioxidant and antibacterial properties, as well as their ability to release tanshinone and withstand environmental stress. The results of the study demonstrated a significant improvement in the antioxidant capabilities of tanshinone with the nanoparticle coating. The T/Z/P NPs exhibited enhanced tanshinone release under simulated gastrointestinal conditions compared to T/Z nanoparticles. These nanoparticles displayed remarkable stability against fluctuations in environmental pH and thermal conditions. The study also revealed that the critical flocculation concentration of the system was 0.5 M of salt. Furthermore, the T/Z/P NPs showed good stability during storage at 4°C for 30 days, making them an excellent candidate for use in various food products.

Xanthan gum ink based on Lycium ruthenicum anthocyanin as an indicator of color change for monitoring freshness of cold fresh meat

The continuous development of intelligent food packaging has led to an increased focus on using freshness-indicating inks, which could provide a high level of quality control and consumer experience. This study aimed to further promote the application of xanthan gum ink in food freshness indication by optimizing its performance in screen printing. A novel freshness-indicating ink was prepared using Lycium ruthenicum anthocyanin (LRA) as the core indicator, glucose as the pigment carrier, soybean oil as the linker, and xanthan gum (XG) as the thickener. Scanning electron microscopy (SEM) demonstrated that the ink was uniformly distributed on paper using screen printing. Rheological and particle size analyses revealed that the incorporation of XG significantly enhanced the interaction force between droplets in the ink system. Further tests on viscosity, fineness, and initial dryness indicated that XG, a natural microbial polysaccharide with excellent stability, could effectively improve the flowability of the ink. Specifically, at a 0.3 % XG content, the ink exhibited a unimodal particle size distribution with an average particle size of 851.02 nm and a zeta potential of -27 mV. This indicated the ink system was stable and uniform, with optimal rheological properties and printing suitability. Furthermore, the printed freshness indication labels exhibited a significant change in color as the freshness of the refrigerated meat changed. This study develops a natural and safe method for monitoring the freshness of refrigerated meat and provides an optimized idea for applying indicator inks.

Xanthan-Polyurethane Conjugates: An Efficient Approach for Drug Delivery

The antifungal agent, ketoconazole, and the anti-inflammatory drug, piroxicam, were incorporated into matrices of xanthan or oleic acid-esterified xanthan (Xn) and polyurethane (PU), to develop topical drug delivery systems. Compared to matrices without bioactive compounds, which only showed a nominal compressive stress of 32.18 kPa (sample xanthan-polyurethane) at a strain of 71.26%, the compressive resilience of the biomaterials increased to nearly 50.04 kPa (sample xanthan-polyurethane-ketoconazole) at a strain of 71.34%. The compressive strength decreased to around 30.67 kPa upon encapsulating a second drug within the xanthan-polyurethane framework (sample xanthan-polyurethane-piroxicam/ketoconazole), while the peak sustainable strain increased to 87.21%. The Weibull model provided the most suitable fit for the drug release kinetics. Unlike the materials based on xanthan-polyurethane, those made with oleic acid-esterified xanthan-polyurethane released the active ingredients more slowly (the release rate constant showed lower values). All the materials demonstrated antimicrobial effectiveness. Furthermore, a higher volume of piroxicam was released from oleic acid-esterified xanthan-polyurethane-piroxicam (64%) as compared to xanthan-polyurethane-piroxicam (44%). Considering these results, materials that include polyurethane and either modified or unmodified xanthan showed promise as topical drug delivery systems for releasing piroxicam and ketoconazole.

Preparation and characterization of vitamin E microcapsules stabilized by Zein with different polysaccharides

Vitamin E (VE) microencapsulation using a green surfactant emulsifier not only protects the active substance and is also environmentally friendly. In this study, we used alcohol ether glycoside as an emulsifier to prepare VE microcapsules using the biological macromolecule Zein and various polysaccharides. The resulting nano microcapsules exhibited a spherical structure, stable morphology, uniform size, and a >90% encapsulation efficiency. They also had good thermal stability and slow-release properties. Of these, xanthan gum/Zein-VE microcapsules were superior, with antioxidant properties up to 3.05-fold higher than untreated VE. We successfully developed VE nano microcapsules that meet eco-friendly and sustainable requirements, which may have applications in the food and pharmaceutical industries.

Conception of pH-sensitive calcium alginate/poly vinyl alcohol hydrogel beads for controlled oral curcumin delivery systems. Antibacterial and antioxidant properties

Curcumin, a bioactive compound derived from the rhizome of Curcuma longa, has gained widespread attention for its potential therapeutic properties, including anti-inflammatory, antioxidant and anticancer effects. However, its poor aqueous solubility, instability and limited bioavailability have hindered its clinical applications. New beads formulations based on sodium alginate biopolymer (SA) and poly vinyl alcohol (PVA) were successfully prepared and evaluated as a potential drug vehicle for extended release of curcumin (Cur). Pristine and curcumin loaded calcium alginate/poly vinyl alcohol beads (CA/PVA and CA/PVA/Cur) at different compositions of SA and PVA were prepared by an ionotropic gelation method of SA followed by two freeze-thawing (FT) cycles for further crosslinking of PVA. Characterization techniques, such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), UV-Visible spectroscopy, thermogravimetric analysis (TGA) and x-ray diffraction (XRD) were used to confirm the successful microencapsulation of curcumin within the CA/PVA microcapsules. Furthermore, the swelling of pristine beads, pH-sensitive properties and in vitro release studies of curcumin loaded beads were investigated at 37 °C in simulated gastric fluid (SGF), simulated intestinal fluid (SIF) and simulated colonic fluid (SCF). The effect of the polymer blend ratio, the encapsulation efficiency (EE %) of curcumin, the loading capacity (LC μg/mg), the sphericity factor (SF), the antioxidant activity of the elaborated beads and their antimicrobial properties against bacteria and fungi were just as much evaluated. The obtained results indicate that the swelling and the behavior of the developed beads were influenced by the pH of the test medium and the PVA content. The introduction of PVA into the SA matrix greatly enhanced the physicochemical properties, the encapsulation efficiency and the loading capacity of the elaborated microparticles. Results also suggested that the antioxidant activity of the loaded beads (CA/PVA/Cur) showed a higher DPPH radical scavenging activity while the bacterial and fungal strains proved sensitive to the different formulations used in the assay. Moreover, the important drug encapsulation efficiency and the sustainable drug release of these materials make them promising for the development of new drug carrier systems for colon targeting.

Fabrication of zein-tamarind seed polysaccharide-curcumin nanocomplexes: their characterization and impact on alleviating colitis and gut microbiota dysbiosis in mice

In this work, a zein-tamarind seed polysaccharide (TSP) co-delivery system was fabricated using an anti-solvent precipitation method. The formation mechanism, characterization, and effect on alleviating colitis and gut microbiota dysbiosis in mice of zein-TSP-curcumin (Z/T-Cur) nanocomplexes were investigated. Hydrogen bonding and the hydrophobic effect played a key role in the formation of Z/T-Cur nanocomplexes, and the interactions were spontaneous and driven by enthalpy. The encapsulation efficiency, loading capacity, and bioavailability increased from 60.8% (Zein-Cur) to 91.7% (Z/T-Cur1:1), from 6.1% (Zein-Cur) to 18.3% (Z/T-Cur1:1), and from 4.7% (Zein-Cur) to 20.0% (Z/T-Cur1:1), respectively. The Z/T-Cur significantly alleviated colitis symptoms in DSS-treated mice. Additionally, the prepared nanocomplexes rebalanced the gut microbiota composition of colitis mice by increasing the abundance of Akkermansia. Odoribacter and Monoglobus were rich in the Z-T-Cur treatment group, and Turicibacter and Bifidobacterium were rich in the zein-TSP treatment group. This study demonstrated that the TSP could be helpful in the targeted drug delivery system.

Calcium ions induced ι-carrageenan-based gel-coating deposited on zein nanoparticles for encapsulating the curcumin

Zein, curcumin (Cur), and ι-carrageenan (ιCar) were used to prepare core-shell biopolymer nanoparticles (Zein-Cur-ιCar). These nanoparticles consisted of a nutraceutical-loaded protein core (curcumin-loaded zein nanoparticles) and a gelled polysaccharide shell (calcium cross-linked ι-carrageenan). The size, charge, morphology, and interactions of the nanoparticles were characterized by dynamic light scattering, zeta-potential analysis, scanning electron microscopy, and Fourier Transform infrared analysis. Ionic bridging, electrostatic attraction, hydrogen bonding, and hydrophobic attraction were involved in particle formation. The high encapsulation efficiency (93.2%) and loading capacity (6.2%) indicated that curcumin was well encapsulated within nanoparticles with optimized compositions (zein:ι-carrageenan 100:40). These particles had relatively small diameters (351.8 nm) and effectively delayed the light and thermal degradation of curcumin. Moreover, the curcumin within the nanoparticles was released in a sustained manner under simulated gastrointestinal conditions, which may improve its oral bioavailability. In summary, calcium carrageenan-coated zein nanoparticles have potential for the encapsulation, protection, and controlled release of hydrophobic nutrients.

Fabrication and Application of Turmeric Extract-Incorporated Oleogels Structured with Xanthan Gum and Soy Lecithin by Emulsion Template

Turmeric extract (TE)-loaded oleogels (TE-OG) was fabricated by an emulsion template technique using xanthan gum (XG) and soy lecithin (SL) as oleogelators. The formulation for TE-OG was optimized using 0.32% XG, 1.2% SL, and 1.0% TE. The optimized TE-OG had a minimal particle size of 810.23 ± 10.68 nm as measured by the dynamic light scattering (DLS) method, and a high encapsulation efficiency (EE) of 96.62 ± 0.56%. Additionally, the optimized TE-OG exhibited a favorable zeta potential of -27.73 ± 0.44 mV, indicating the good stability of the TE-OG due to the electrostatic repulsion between particles. TE-OG formulated with 0.32% XG and 1.2% SL was subjected to frequency sweep testing to evaluate its solid-like rheological behavior. The oil-binding capacity (OBC) of TE-OG was consistently maintained above 99.99%. In vitro digestion of TE-OG demonstrated the potential of the emulsion template for controlled release, with less than 20% of the encapsulated curcumin being released in simulated gastric fluid (SGF), whereas nearly 70% was released in the simulated intestinal fluid (SIF). Moreover, TE-OG affected the rapid release of free fatty acids (FFAs), which have a positive effect on the digestion of triacylglycerols found in soybean oil (SO). TE-OG was further used as an alternative to commercial butter to produce pound cakes, and their rheological properties were compared to those of the pound cake prepared using commercial butter. The pound cake prepared using TE-OG showed a noticeable decrease in hardness from 10.08 ± 1.39 N to 7.88 ± 0.68 N and increased porosity, demonstrating the inherent capability of TE-OG to enhance the overall quality standards of bakery products.

The role of polysaccharides in improving the functionality of zein coated nanocarriers: Implications for colloidal stability under environmental stresses

Zein has gained popularity over the past few years as an incredible food and bio-based materials. The potential functions and health benefits of zein microcapsules or micro-/nanoparticles in bioactive components delivery, structured emulsion, etc., have received great attention. However, the development has been limited by colloidal destabilization, especially when thermal processing is involved. There is a recent trend in developing zein-polysaccharide complexes (ZPCs), which has tremendously improved the performance of zein-based colloidal carrier systems or emulsions. Increasing our understanding of zein interactions and their contribution to the structure of various macromolecules can help us to develop novel biomaterials that can be used in food, agriculture, biomedicine, and cosmetics. In addition, these nanocarriers are suitable for the encapsulation and delivery of bioactive compounds which have positive perspective in food industry. Therefore, this article aimed to review recent advances in the ZPCs that can be applied to functional or health-promoting foods, with a focus on the characteristics of different ZPCs, factors and mechanisms affecting the stability (especially thermal stability) of these complexes, and their application in food industry as a carrier for BCs. Further, the stability of ZPCs based emulsions under processing and physiological environments, as well some typical effective methods are introduced. Also, the principal challenges and prospects were enumerated and discussed.

Ethyl cellulose/gelatin/β-cyclodextrin/curcumin nanofibrous membrane with antibacterial and formaldehyde adsorbable capabilities for lightweight and high-performance air filtration

Functionalization of bio-based nanofibers is the development tendency of high-performance air filter. However, the conventional structural optimization strategy based on high solution conductivity greatly hinders the development of fully bio-based air filter, and not conducive to sustainable development. This work fabricated fully bio-based nanofibrous membrane with formaldehyde-adsorbable and antibacterial capabilities by electrospinning low-conductivity solution for high-performance air filtration and applied to lightweight mask. The "water-like" ethyl cellulose (EC) was selected as the base polymer to "nourish" functional materials of gelatin (GE), β-cyclodextrin (βCD), and curcumin (Cur), thus forming a solution system with high binding energy differences and electrospinning into ultrafine bimodal nanofibers. The filtration efficiency for 0.3 μm NaCl particles, pressure drop, and quality factor were 99.25 %, 53 Pa, and 0.092 Pa-1, respectively; the bacteriostatic rates against Escherichia coli and Staphylococcus aureus were 99.9 % and 99.4 %, respectively; the formaldehyde adsorption capacity was 442 μg/g. This is the first report on antibacterial and formaldehyde-adsorbable high-performance air filter entirely made from bio-based materials. This simple strategy will greatly broaden the selection of materials for preparing high-performance multifunctional air filter, and promote the development of bio-based air filter.

Preparation and characterization of particle-filled microgels by chemical cross-linking based on zein and carboxymethyl starch for delivering the quercetin

This work aimed to develop novel particle-filled microgels based on zein and carboxymethyl starch for delivering quercetin (Que). The anti-solvent precipitation and chemical cross-linking methods were combined to produce the zein-carboxymethyl starch particle-filled microgels (SM-Z). The critical finding of the study was that adding zein nanoparticles significantly improved the strength, water holding capacity, and thermal stability of carboxymethyl starch microgel (SM). Besides, SM-Z had good biodegradability, and the particle size was about 44-61 μm. SM-Z successfully encapsulated Que with a high encapsulation efficiency of 86.7 %. Que-loaded SM-Z (Q/SM-Z) significantly enhanced 30 d storage and UV light stability (up to 89.4 % retention rate) of Que than the Que-loaded SM (Q/SM). Q/SM-Z exhibited pH-responsive swelling behavior, and the swelling was greatest in the simulated intestinal fluid (pH = 7). Besides, the Q/SM-Z showed good stability in simulated gastric fluids and sustained release of Que in simulated intestinal fluids, 72.5 % Que was released at 8 h. During Que transport in Caco-2 cell monolayers, Q/SM (5.8 %) and Q/SM-Z (9.7 %) were significantly higher than free Que (1.93 %). Therefore, as an oral delivery system for hydrophobic active substances, SM-Z possesses good biodegradability and pH-responsive intestinal-targeted delivery capability, providing a new strategy for designing starch-based encapsulation materials.

Polysaccharides gums in drug delivery systems: A review

For the drug delivery system, drug carriers' selection is critical to the drug's success in reaching the desired target. Drug carriers from natural biopolymers are preferred over synthetic materials due to their biocompatibility. The use of polysaccharide gums in the drug delivery system has received considerable attention in recent years. Polysaccharide gums are renewable resources and abundantly found in nature. They could be isolated from marine algae, microorganisms, and higher plants. In terms of carbohydrates, the gums are water-soluble, non-starch polysaccharides with high commercial value. Polysaccharide gums are widely used for controlled-release products, capsules, medicinal binders, wound healing agents, capsules, and tablet excipients. One of the essential applications of polysaccharide gum is drug delivery systems. The various kinds of polysaccharide gums obtained from different plants, marine algae, and microorganisms for the drug delivery system application are discussed comprehensively in this review paper.

Thiol-modified hyaluronic acid improves the physical stability of curcumin-zein nanoparticles by forming disulfide bonds with zein

Zein-based nanoparticles have been developed in the food industry. However, their poor pH stability and unfavorable ionic strength stability remain a challenge even with the use of polysaccharides (such as hyaluronic acid) as stabilizers. To address this shortcoming, an improved strategy based on the disulfide bonds between thiol-modified hyaluronic acid (HASH) and zein was proposed. In this study, curcumin-zein nanoparticles (ZNs-HASH) were prepared with HASH as a stabilizer. The ZNs-HASH displayed similar particle sizes and spherical structures with ZNs and ZNs-HA (HA as a stabilizer). The Fourier transform infrared spectroscopy demonstrated the formation of disulfide bonds between zein and HASH. Among the three formulations tested, ZNs-HASH exhibited the highest pH and salt ion stability and the strongest antioxidant capacity. This study provided new insights for the improvement of physical stability of zein nanoparticles and the development of oral bioactive substances by chemical modification of natural polysaccharides.

Physicochemical stability, antioxidant activity, and antimicrobial activity of quercetin-loaded zein nanoparticles coated with dextrin-modified anionic polysaccharides

Core-shell biopolymer nanoparticles are assembled from a hydrophobic protein (zein) core and a hydrophilic polysaccharide (carboxymethyl dextrin) shell. The nanoparticles were shown to have good stability and the ability to protect quercetin from chemical degradation under long-term storage, pasteurization, and UV irradiation. Spectroscopy analysis shows that electrostatic, hydrogen bonding, and hydrophobic interactions are the main driving forces for the formation of composite nanoparticles. Quercetin coated with nanoparticles significantly enhanced its antioxidant and antibacterial activities and showed good stability and slow release in vitro during simulated gastrointestinal digestion. Furthermore, the encapsulation efficiency of carboxymethyl dextrin-coated zein nanoparticles (81.2%) for quercetin was significantly improved compared with that of zein nanoparticles alone (58.4%). These results indicate that carboxymethyl dextrin-coated zein nanoparticles can significantly improve the bioavailability of hydrophobic nutrient molecules such as quercetin and provide a valuable reference for their application in the field of biological delivery of energy drinks and food.

Two-Stage Supramolecular Self-Assembly-Directed Collagen-Peptide-Decorated Liposomal Complexes of Curcumin Microspheres with Enhanced Solubility and Bioavailability

Green formulations of phytonutrients with enhanced solubility and bioavailability are of great significance in nutrition therapy. In the present contribution, we hypothesized that the collagen peptides could be a safe, natural, food-grade, and cost-effective functional agent for the surface decoration and stabilization of liposomes in powder form and hence a "green" solution for the oral delivery of phytonutrients. The present study reports a two-stage supramolecular self-assembly-directed process for the preparation of collagen peptide-decorated liposomal complexes of curcumin (CCL) [10% (w/w)] as microspheres (125 ± 25 μm) with improved solubility (1.46 × 10⁵-fold) and sustained-release properties under gastrointestinal pH conditions. The molecular self-assembly of collagen peptides around the lipid bilayers and the various noncovalent interactions and conformational changes leading to the supramolecular assembly to act as a matrix for the encapsulation of lipid vesicles of curcumin were clear from the spectroscopic studies (UV-vis, fluorescence, FTIR, and circular dichroism). Further investigation of pharmacokinetics following a randomized double-blinded controlled trial on healthy volunteers (n = 15) demonstrated that the oral administration of 2.5 g of CCL sachet (250 mg of curcumin) enhanced the plasma concentration (C_max: 118 vs. 4.3 ng/mL), the elimination half-life (4.2 vs. 0.7 h), and bioavailability as per the area under the curve over 12 h [AUC_0-12h (CCL) = 506·8 vs. AUC_0-12h (C95) = 9.47 (53-fold)], when the plasma concentration of curcumin was estimated with triple quadruple tandem mass spectrometry (UPLC-ESI-MS/MS).

Construction of a Ternary Composite Colloidal Structure of Zein/Soy Protein Isolate/Sodium Carboxymethyl Cellulose to Deliver Curcumin and Improve Its Bioavailability

This work presents the fabrication of ternary nanoparticles (Z/S/C NPs) comprising zein (Z), soy protein isolate (SPI) and carboxymethylcellulose sodium (CMC-Na) through a pH-driven method. The results showed that the smallest particle size (71.41 nm) and the most stable zeta potential, measuring -49.97 mV, were achieved with the following ratio of ternary nanoparticles Z/SPI/CMC-Na (2:3:3). The surface morphology of the nanoparticles was further analyzed using transmission electron microscopy, and the synthesized nanoparticles were utilized to encapsulate curcumin (Cur), a hydrophobic, bioactive compound. The nanoparticles were characterized using a particle size analyzer, infrared spectroscopy, and X-ray diffraction (XRD) techniques. The results revealed that the formation of nanoparticles and the encapsulation of Cur were driven by electrostatic, hydrogen-bonding and hydrophobic interactions. The drug loading efficiency (EE%) of Z/S/C-cur nanoparticles reached 90.90%. The Z/S/C ternary nanoparticles demonstrated enhanced storage stability, photostability and simulated the gastrointestinal digestion of Cur. The release of Cur and variations in the particle size of nanoparticles were investigated across different stages of digestion. The biocompatibility of the Z/S/C ternary nanoparticles was assessed by conducting cell viability assays on HepG2 and L-O2 cells, which showed no signs of cytotoxicity. These results suggested that the ternary composite nanoparticles have potential in delivering nutritional foods and health-promoting bioactive substances.

Zein-maltodextrin nanocomplex based dissolving microneedle: A promising approach for Paliperidone palmitate delivery

Researchers are looking at microneedle devices as a possible solution to the problems with poor patient compliance and severe gastrointestinal side effects associated with conventional oral or injectable techniques for treating schizophrenia. Microneedles (MNs) may be an effective approach for transdermal drug delivery of antipsychotic drugs. We fabricated polyvinyl alcohol (PVA) microneedles loaded with paliperidone palmitate (PLDN) nanocomplex and studied their therapeutic potency for schizophrenia. We demonstrated that PLDN nanocomplex-loaded MNs had a pyramidal shape with high mechanical strength, which allowed us to successfully deliver PLDN into the skin and improve permeation behavior ex-vivo. Microneedling enhanced the concentration of PLDN in plasma and brain tissue as compared with the plain drug as observed. In addition, the therapeutic effectiveness was significantly improved by MNs with the capability of extended release. According to the findings of our study, the nanocomplex-loaded microneedle-mediated transdermal delivery of PLDN has the potential to be a novel treatment for schizophrenia.

Preparation and characterization of novel composite nanoparticles using zein and hyaluronic acid for efficient delivery of naringenin

Hyaluronic acid (HA), a polymer mainly found in animal tissues, plays an important role in food research. In this study, it was used for delivery improvement of naringenin (NAR) by loading it into zein nanoparticles using an anti-solvent precipitation method. The optimal Nar/zein-HA nanoparticles were uniformly spherical with particle sizes of 209.2 ± 1.9 nm, polydispersity indexes of 0.146 ± 0.032 and zeta-potentials of -19.0 ± 0.7 mV. Moreover, the microstructure of Nar/zein-HA nanoparticles was maintained primarily by hydrophobic, electrostatic, and hydrogen-bonding interactions. Furthermore, Nar/zein-HA nanoparticles showed favorable physical stability and enhanced encapsulation efficiency. Additionally, the antioxidant capacity and release in simulated gastrointestinal digestion of Nar were significantly improved. Overall, these findings indicate that the delivery efficiency of Nar was improved by formulation of ternary nanoparticles.

Microbial Polysaccharide-Based Nanoformulations for Nutraceutical Delivery

In recent times, nutrition and diet have become prominent health paradigms due to sedentary lifestyle disorders. Preventive health care strategies are becoming increasingly popular instead of treating and managing diseases. A nutraceutical is an innovative concept that offers additional health benefits beyond its fundamental nutritional value. These nutraceuticals have the potential to reduce the exorbitant use of synthetic drugs because the modern medicine approach of treating diseases with high-tech, expensive supplements, and long-term consequences aggravates consumers. However, most nutraceuticals are plant-derived, making them susceptible to degradation and prone to chemical instability, poor solubility, unpleasant taste, and bioactivity loss before absorption to the targeted site. To counteract this problem, the bioavailability of these labile compounds can be maximized by encapsulating them in protective nanocarriers. It is crucial that nanoencapsulation technologies convert bioactive compounds into forms that can be easily combined with functional foods and beverages without adversely affecting their organoleptic properties. In recent years, nanoformulations using food-grade materials, such as polysaccharides, proteins, lipids, etc., have received considerable attention. Among them, microbial polysaccharides are biocompatible, nontoxic, and nonimmunogenic, and most of them are US-FDA approved and can undergo tailored modifications. The nanoformulation of microbial polysaccharide is a relatively new frontier which has several advantages over existing systems. The present article, for the first time, comprehensively reviews microbial polysaccharides-based nanodelivery systems for nutraceuticals and discusses various techno-commercial aspects of these nanotechnological preparations. Moreover, this has also attempted to draw a future research perspective in this area.

Encapsulation and sustained release of curcumin by hawthorn pectin and Tenebrio Molitor protein composite hydrogel

In this study, the effects of pH value, mixing ratio and the Ca²⁺ concentration on the complex gelation of hawthorn pectin (HP) and Tenebrio Molitor protein (TMP) were investigated. The turbidity results showed that the composite gel had the maximum polymer concentration when the mixing ratio was 2:1 and the pH value was 3.35. The rheological measurement results showed that TMP/HP (15 mmol/L) hydrogel (THIH) had the highest storage modulus and loss modulus, indicating that the properties of the hydrogel at this Ca²⁺ concentration had been significantly improved. The results of scanning electron microscope and pore size also proved that the network structure prepared under this condition was compact and uniform, the pore size was small, which was beneficial to the entrapment of active components. Subsequently, in order to explore the storage stability and antioxidant activity of THIH-loaded curcumin in simulated gastrointestinal environment, in vitro simulated digestion experiment was carried out and satisfactory results were obtained. To sum up, THIH was a promising delivery system with broad application prospects, which was expected to provide a novel idea for the entrapment and delivery of active components.

Polysaccharide-based nano-delivery systems for encapsulation, delivery, and pH-responsive release of bioactive ingredients

Polysaccharides are natural polymers isolated from plants, microorganisms, algae, and some animals they are composed of aldoses or ketoses linked by glycosidic bonds. Due to the affordability, abundance, safety, and functionality, polysaccharides are widely used in the foods and medicines to construct oral delivery systems for sensitive bioactive ingredients. In this article, the characteristics and applications of nanoscale polysaccharide-based delivery carriers are reviewed, including their ability to encapsulate, protect, and deliver bioactive ingredients. This review discusses the sources, characteristics, and functional properties of common food polysaccharides, including starch, pectin, chitosan, xanthan gum, and alginate. It also highlights the potential advantages of using polysaccharides for the construction of nano-delivery systems, such as nanoparticles, nanogels, nanoemulsions, nanocapsules, and nanofibers. Moreover, the application of delivery systems assembled from polysaccharides is summarized, with a focus on pH-responsive delivery of bioactives. There are some key findings and conclusions: Nanoscale polysaccharide delivery systems provide several advantages, including improved water-dispersibility, flavor masking, stability enhancement, reduced volatility, and controlled release; Polysaccharide nanocarriers can be used to construct pH-responsive delivery vehicles to achieve intestinal-targeted delivery and controlled release of bioactive ingredients; Polysaccharides can be used in combination with other biopolymers to form composite delivery systems with enhanced functional attributes.

Development of self-assembled zein-fucoidan complex nanoparticles as a delivery system for resveratrol

Resveratrol is a well-studied dietary polyphenol with diverse health-promoting bioactivities. However, the aqueous insolubility and chemical instability of resveratrol hamper its practical application. This study set out to address these limitations by constructing zein-fucoidan composite nanoparticles as a delivery system of resveratrol. The optimized resveratrol-loaded zein-fucoidan particles (RE-ZFP) were obtained at zein-to-fucoidan ratio of 2:1 (w/w) and zein-to-resveratrol ratio of 10:1 (w/w), and RE-ZFP showed evenly distributed and smoothly spherical microstructures, mean particle size of 121 nm, ζ-potential of - 41 mV, encapsulation efficiency for resveratrol of 95.4%. Electrostatic, steric, hydrophobic, and hydrogen-bonding interactions were major forces required to form RE-ZFP. In addition, RE-ZFP exhibited greater photostability and colloidal stability (including pH, ionic, and storage stabilities) than resveratrol-loaded zein particles (RE-ZP). Particularly, RE-ZFP showed fairly good pH stability. Moreover, zein-fucoidan-based delivery system exhibited a controlled release of resveratrol under in vitro digestion. Finally, zein-fucoidan nanocarriers presented extremely low cytotoxicity to HIEC-6 cells. All the findings demonstrate that the zein-fucoidan nanoparticles developed in the current work will be a prospective strategy for loading resveratrol and other hydrophobic bioactive ingredients and thus extending their application in nutraceuticals or pharmaceuticals.

Preparation of protamine-hyaluronic acid coated core-shell nanoparticles for enhanced solubility, permeability, and oral bioavailability of decoquinate

Decoquinate (DQ) has low oral bioavailability owing to its poor water solubility. In this study, a DQ solid dispersion (DQ-SD) was fabricated using mechanochemical technology to encapsulate DQ and improve its oral bioavailability. DQ-SD is easily generated via self-assembly in the aqueous phase to form micelles consisting of disodium glycyrrhizinate (Na₂GA) nanoparticles with a protamine (PRM) and anionic hyaluronic acid (HA) layers. The spherical DQ nanoparticles with an average diameter of 114.95 nm were obtained in an aqueous phase with a critical micelle concentration of 0.157 mg/mL, zeta potential of -38.38 mV, polydispersity index of 0.200, and drug loading of 5.66 %. The dissolution rate and cumulative release of DQ-SD were higher than those of pure DQ. Furthermore, the bioavailability of DQ-SD was approximately 6.3 times higher than that of pure DQ. Pharmacokinetic and biodistribution studies indicated that DQ-SD possessed a significantly higher concentration in the blood and preferential liver tissue accumulation, than that of pure DQ. The developed DQ-SD exhibited considerable potential for developing old DQ for a new application as a hematogenous parasite drug and provides a reference for developing more efficient delivery systems for hydrophobic bioactive agents.

Efficient Delivery of Curcumin by Alginate Oligosaccharide Coated Aminated Mesoporous Silica Nanoparticles and In Vitro Anticancer Activity against Colon Cancer Cells

We designed and synthesized aminated mesoporous silica (MSN-NH₂), and functionally grafted alginate oligosaccharides (AOS) on its surface to get MSN-NH₂-AOS nanoparticles as a delivery vehicle for the fat-soluble model drug curcumin (Cur). Dynamic light scattering, thermogravimetric analysis, and X-ray photoelectron spectroscopy were used to characterize the structure and performance of MSN-NH₂-AOS. The nano-MSN-NH₂-AOS preparation process was optimized, and the drug loading and encapsulation efficiencies of nano-MSN-NH₂-AOS were investigated. The encapsulation efficiency of the MSN-NH₂-Cur-AOS nanoparticles was up to 91.24 ± 1.23%. The pH-sensitive AOS coating made the total release rate of Cur only 28.9 ± 1.6% under neutral conditions and 67.5 ± 1% under acidic conditions. According to the results of in vitro anti-tumor studies conducted by MTT and cellular uptake assays, the MSN-NH₂-Cur-AOS nanoparticles were more easily absorbed by colon cancer cells than free Cur, achieving a high tumor cell targeting efficiency. Moreover, when the concentration of Cur reached 50 μg/mL, MSN-NH₂-Cur-AOS nanoparticles showed strong cytotoxicity against tumor cells, indicating that MSN-NH₂-AOS might be a promising tool as a novel fat-soluble anticancer drug carrier.

Zein Microparticles and Nanoparticles as Drug Delivery Systems

Zein is a natural, biocompatible, and biodegradable polymer widely used in the pharmaceutical, biomedical, and packaging fields because of its low water vapor permeability, antibacterial activity, and hydrophobicity. It is a vegetal protein extracted from renewable resources (it is the major storage protein from corn). There has been growing attention to producing zein-based drug delivery systems in the recent years. Being a hydrophobic biopolymer, it is used in the controlled and targeted delivery of active principles. This review examines the present-day landscape of zein-based microparticles and nanoparticles, focusing on the different techniques used to obtain particles, the optimization of process parameters, advantages, disadvantages, and final applications.

Delivery of curcumin by fucoidan-coated mesoporous silica nanoparticles: Fabrication, characterization, and in vitro release performance

Mesoporous silica nanoparticles (MSN) are effective drug delivery carriers because of their adjustable large pore size and high porosity. In this study, complex nanoparticles containing disulfide bonds (SS) were designed and prepared as curcumin (Cur) carriers by using fucoidan (FUC) and MSN as the polymer matrix. The product was characterized using scanning electron microscopy, transmission electron microscopy, dynamic light scattering, Fourier-transform infrared spectroscopy, and an N₂ adsorption and desorption test. When the mass ratio of MSN to FUC was 2:1, the nanospheres particle size was the smallest (295.6 ± 0.98 nm, -35.2 ± 0.8 mV). Furthermore, the curcumin encapsulation rate by MSN-Cur-SS-FUC was over 90%, and the cumulative release rate in 24 h was over 80% due to the combined effect of weak acidity and high glutathione concentration in the tumor site microenvironment. When the Cur concentration was 50 μg/mL, the cell viability of free Cur was 63.8%, the cell viability of MSN-Cur-SS-FUC was 14.5%, and the cell viability of MSN-SS-FUC at the same concentration remained above 74.6%. MSN-SS-FUC composite nanoparticles showed a good delivery of Cur, a lipid-soluble active compound, and provides a new delivery route for other lipid-soluble and poorly bioavailable active compounds.

Rational Fabrication of Folate-Conjugated Zein/Soy Lecithin/Carboxymethyl Chitosan Core-Shell Nanoparticles for Delivery of Docetaxel

The objective of this work is to design and fabricate a natural zein-based nanocomposite with core-shell structure for the delivery of anticancer drugs. As for the design, folate-conjugated zein (Fa-zein) was synthesized as the inner hydrophobic core; soy lecithin (SL) and carboxymethyl chitosan (CMC) were selected as coating components to form an outer shell. As for fabrication, a novel and appropriate atomizing/antisolvent precipitation process was established. The results indicated that Fa-zein/SL/CMC core-shell nanoparticles (FZLC NPs) were successfully produced at a suitable mass ratio of Fa-zein/SL/CMC (100:30:10) and the freeze-dried FZLC powder showed a perfect redispersibility and stability in water. After that, docetaxel (DTX) as a model drug was encapsulated into FZLC NPs at different mass ratios of DTX to FZLC (MR). When MR = 1:15, DTX/FZLC NPs were obtained with high encapsulation efficiency (79.22 ± 0.37%), small particle size (206.9 ± 48.73 nm), and high zeta potential (-41.8 ± 3.97 mV). DTX was dispersed in the inner core of the FZLC matrix in an amorphous state. The results proved that DTX/FZLC NPs could increase the DTX dissolution, sustain the DTX release, and enhance the DTX cytotoxicity significantly. The present study provides insight into the formation of zein-based complex nanocarriers for the delivery of anticancer drugs.

Preparation and physiochemical properties of enzymatically modified octenyl succinate starch

The high viscosity and low solubility of octenyl succinate starch (OSAS) in water often lead to low reaction efficiency and uneven distribution of OSA groups, which can be solved by subjecting OSA starch to enzymatic digestion. Waxy corn starch is used to produce OSAS. The molecular weight of enzymolysis modified octenyl succinate starches (E-OSAS) decreased with the addition of enzyme, and the substitution of enzymatically digested OSAS was larger than that of OSAS. As the addition of pullulanase increased, the substitution of E-OSAS tended to increase and the apparent viscosity decreased significantly. The smaller its particle size and polydispersity index (PDI), the larger the absolute value of the zeta potential. E₄₀ -OSAS with the smallest particle size and best homogeneity and stability had the smallest weight average molecular weight (1.38 × 10⁶  g/mol), the smallest number average molecular weight (1.37 × 10⁵  g/mol), and the largest degree of substitution of 0.019. The E-OSAS has not been investigated deeply enough, and the enzymatic treatment by pullulanase is not much studied, so this study is of great importance to provide some basis for the research of new microcapsules. PRACTICAL APPLICATION: This work aims to provide wall materials with lower viscosity and better encapsulation properties for the food industry. Waxy corns starch is used to manufacture OSAS. This wall material is a partly biodegradable material that is hydrophilic on the outside and hydrophobic on the inside, and its preparation process is in line with the concept of green chemistry.

Delivery of Curcumin Using Zein-Gum Arabic-Tannic Acid Composite Particles: Fabrication, Characterization, and in vitro Release Properties

The application of curcumin (Cur) in fat-free food is limited due to its poor water solubility, stability, and bioaccessibility. In this study, zein-gum arabic-tannic acid (zein-GA-TA) composite particles with high physical stability were fabricated to deliver Cur (ZGT-Cur). Their stability and in vitro release properties were also evaluated. The results showed that the thermal and photochemical stability of Cur was improved after loading into composite particles. Meanwhile, the retention rate of Cur in ZGT-Cur composite particles was enhanced compared with Z-Cur or ZG-Cur particles. Fourier transform infrared (FTIR) spectroscopy confirmed that the hydrogen bond within the particles was greatly enhanced after the addition of tannic acid (TA). The in vitro antioxidant activity of Cur in ZGT-Cur composite particles was higher in terms of 2,2'-azino-bis (ABTS) (93.64%) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) (50.41%) compared with Z-Cur or ZG-Cur particles. The bioaccessibility of Cur in ZGT-Cur composite particles was 8.97 times higher than that of free Cur. Therefore, the particles designed in this study will broaden the application of Cur in the food industry by improving its stability and bioaccessibility.

A review of factors affecting the stability of zein-based nanoparticles loaded with bioactive compounds: from construction to application

Zein-based nanoparticles loaded with bioactive compounds have positive prospects in the food industry, but an important limiting factor for development is colloidal instability. Currently, extensive researches are focused on solving the instability of zein nanoparticles, but since the beginning of the studies, there has not been a summary of the factors affecting the stability of zein-based nanoparticles. In the present work, the factors were reviewed comprehensively from the perspective of carrier construction and application evaluation. The former mainly includes type, quantity, and characteristics of biopolymer, the mass ratio of biopolymer/bioactive compound to zein, blending sequence of biopolymer, and location of encapsulated bioactive compounds. The latter mainly includes pH, heating, ionic strength, storage, freeze-drying, and gastrointestinal digestion. The former is the prerequisite for the success of the latter. The challenge is that stability research is limited to the laboratory level, and it is difficult to ensure that the stability results are suitable for commercial food matrices due to their complexity. At the laboratory level, the future trends are the influence of external energy and the cross-complexity and uniformity of stability research. The review is expected to provide systematic understanding and guidance for the development of zein-based nanoparticles stability.

Polysaccharide-Zein Composite Nanoparticles for Enhancing Cellular Uptake and Oral Bioavailability of Curcumin: Characterization, Anti-colorectal Cancer Effect, and Pharmacokinetics

Curcumin (CUR) has demonstrated promising potential as a therapeutic agent against colorectal cancer (CRC). However, its intrinsic shortcomings, including oxidative instability, sensitivity to gastrointestinal (GI) hydrolytic/enzymatic action, and susceptibility to biotransformation and systemic elimination, have greatly undermined its value for application in clinical settings. The development of carriers, in particular oral formulations, for its efficient delivery has remained an important direction in nutraceutical research. In the present work, CUR-encapsulated nanoparticles were fabricated with zein alone (Zein-CUR) and with zein and a polysaccharide (PS) [gum Arabic (GA), hyaluronic acid (HA) and pectin (PC), respectively] (PS-Zein-CUR). Their physicochemical and biological properties were evaluated in a series of in vitro and in vivo assays. Dynamic light scattering analysis showed an increase in the particle size of the nanoparticles from 129.0 nm (Zein-CUR) to 188.8–346.4 nm (PS-Zein-CUR). The three PS-Zein-CUR formulations had significantly higher (17–22%) CUR encapsulation efficiency (EE) than Zein-CUR. Among them, HA-Zein-CUR exhibited the highest EE and loading capacity. Zeta potential and FTIR spectra indicated the involvement of electrostatic and hydrophobic interactions and hydrogen bonds in the formation of the PS-Zein-CUR. In human CRC cell lines (HCT8, HCT29, and HCT116), the three PS-Zein-CUR and CUR all effectively inhibited cell viability and colony formation (HA-Zein-CUR > PC-Zein-CUR > GA-Zein-CUR/CUR). HA-Zein-CUR and PC-Zein-CUR also resulted in significantly higher cellular uptake of CUR than GA-Zein-CUR and CUR. Simulated GI-digestion assay demonstrated significantly improved controlled-release properties of these two formulations. Further pharmacokinetics and tissue distribution assays in a CRC subcutaneous xenograft model in nude mice corroborated the enhanced pharmacokinetic properties of intragastric administration of HA-Zein-CUR compared with that of free CUR (3 times higher C_max and 9.18 times higher plasma AUC). HA-Zein-CUR also led to enhanced delivery and accumulation of CUR in major organs/tissues, in particular CRC tumors and colon. These results together support that HA-Zein-CUR has promising potential as an oral agent for the control of CRC.

Effects of ultrasound-assisted glycosylation on the interface and foaming characteristics of ovotransferrin

Ovotransferrin (OVT) is one of the major functional proteins in egg white protein. Most of the industry only paid attention the biological activity of OVT in iron supplement, antibacterial and other aspects, few reports were carried out on its processing characteristics such as foaming, interfacial behavior such as emulsification and foaming, which was an important processing functional attribute affecting its application scenario. In this study, the effects of ultrasound-assisted glycosylation on the interface and foaming characteristics of OVT were investigated. The results showed that proper ultrasonic treatment had a significant effect on the structure and physicochemical properties of OVT glycosylation products. When ultrasonic treatment lasted for 20 min, the grafting degree of OVT was 20.98%, the particle size decreased and the absolute value of potential increased. The foaming ability of OVT increased first and then decreased after ultrasonic-assisted glycosylation treatment. The foaming ability of OVT increased from 43.54% to 96.73% and the foaming stability increased from 68.92% to 89.19% after ultrasonic-assisted glycosylation treatment for 20 min. The experimental study effectively discovered the effect of ultrasound-assisted glycosylation on the foaming property of OVT, and would provide important technical references for expanding its application in food, biology, medicine and other fields.

A novel environmentally friendly nanocomposite aerogel based on the semi-interpenetrating network of polyacrylic acid into Xanthan gum containing hydroxyapatite for efficient removal of methylene blue from wastewater

Eco-friendly nanocomposite aerogels were prepared as adsorbents for the removal of a model pollutant (methylene blue, MB) from water. These aerogels were comprised of hydroxyapatite (HA) nanoparticles embedded within a polymer matrix consisting of a semi-interpenetrating network of xanthan gum (XG) and polyacrylic acid (PAA). Microscopy and BET analysis showed that the aerogels formed had a nanofibrous porous microstructure with a surface area of 89 m²/g. Rheological analysis showed that the aerogels were viscoelastic materials whose elasticity increased with increasing HA concentration (up to 5 w/w%). The aerogels were effective at removing MB from water, exhibiting an adsorption capacity of 130 mg/g after 200 min. The binding of the MB to the aerogels was mainly attributed to hydrogen bonding and electrostatic attraction. A reusability test showed that the MB removal efficiency of over 86% was preserved after 10 cycles of adsorption-desorption. These results suggest that our nanocomposite aerogels may be useful for the efficient removal of anionic pollutants from wastewater and water supplies due to their ease of synthesis, cost-effectiveness, good mechanical properties, high thermal stability, and good adsorption performance.

Development of fish gelatin-chitooligosaccharide conjugates through the Maillard reaction for the encapsulation of curcumin

The poor water solubility, bioavailability and stability of bioactive compounds have become the bottleneck restricting their wide application, thus developing a functional carrier to realize the efficient encapsulation and activity improvement of active hydrophobic substances has become a research hotspot. In this work, a functional glycosylated fish gelatin (called FG-COS conjugates) carrier based on fish gelatin (FG) and chitooligosaccharide (COS) via Maillard reaction was developed. The functional carrier exhibited good antioxidant activity and high encapsulation of curcumin (Cur). Enhanced antioxidant effect of Cur loaded in FG-COS conjugates (called FG–COS–Cur nanoparticles) was achieved, showing remarkable UV protection on Cur and enhanced intracellular antioxidant activity of FG–COS–Cur nanoparticles. Remarkably, FG–COS–Cur nanoparticles increased the cell viability of H₂O₂-induced oxidative damage Caco-2 cells, drastically reduced the levels of reactive oxygen species (ROS) and lactate dehydrogenase (LDH), and significantly increased intracellular antioxidant enzyme activities, which all exhibited a dose-response relationship. These findings suggested that the FG-COS conjugates with intrinsic antioxidant activity could effectively encapsulate Cur and improved bioavailability for hydrophobic active molecules in functional food field.

•

Functional carrier (FG-COS conjugates) based on glycosylation FG with COS was developed.

•

FG-COS conjugates exhibited good antioxidant activity and excellent loading capacity of Cur.

•

FG-COS conjugates showed remarkable UV protection on Cur.

•

FG–COS–Cur nanoparticles displayed a positive effect on the antioxidant of Cur.

•

FG–COS–Cur nanoparticles significantly attenuated oxidative stress damage in Caco-2 cell.

Anisotropic and Amphiphilic Mesoporous Core-Shell Silica Microparticles Provide Chemically Selective Environments for Simultaneous Delivery of Curcumin and Quercetin

Porous silica materials are often used for drug delivery. However, systems for simultaneous delivery of multiple drugs are scarce. Here we show that anisotropic and amphiphilic dumbbell core-shell silica microparticles with chemically selective environments can entrap and release two drugs simultaneously. The dumbbells consist of a large dense lobe and a smaller hollow hemisphere. Electron microscopy images show that the shells of both parts have mesoporous channels. In a simple etching process, the properly adjusted stirring speed and the application of ammonium fluoride as etching agent determine the shape and the surface anisotropy of the particles. The surface of the dense lobe and the small hemisphere differ in their zeta potentials consistent with differences in dye and drug entrapment. Confocal Raman microscopy and spectroscopy show that the two polyphenols curcumin (Cur) and quercetin (QT) accumulate in different compartments of the particles. The overall drug entrapment efficiency of Cur plus QT is high for the amphiphilic particles but differs widely between Cur and QT compared to controls of core-shell silica microspheres and uniformly charged dumbbell microparticles. Furthermore, Cur and QT loaded microparticles show different cancer cell inhibitory activities. The highest activity is detected for the dual drug loaded amphiphilic microparticles in comparison to the controls. In the long term, amphiphilic particles may open up new strategies for drug delivery.