Protein-mediated nanoscale biotemplating

Vibrational signatures of dynamic excess proton storage between primary amine and carboxylic acid groups

Ammonium and carboxylic moieties play a central role in proton-mediated processes of molecular recognition, charge transfer or chemical change in (bio)materials. Whereas both chemical groups constitute acid-base pairs in organic salt-bridge structures, they may as well host excess protons in acidic environments. The binding of excess protons often precedes proton transfer reactions and it is therefore of fundamental interest, though challenging from a quantum chemical perspective. As a benchmark for this process, we investigate proton storage in the amphoteric compound 5-aminovaleric acid (AV), within an intramolecular proton bond shared by its primary amine and carboxylic acid terminal groups. Infrared ion spectroscopy is combined with ab initio Molecular Dynamics (AIMD) calculations to expose and rationalize the spectral signatures of protonated AV and its deuterated isotopologues. The dynamic character of the proton bond confers a fluxional structure to the molecular framework, leading to wide-ranging bands in the vibrational spectrum. These features are reproduced with remarkable accuracy by AIMD computations, which serves to lay out microscopic insights into the excess proton binding scenario.

Bio-Templating: An Emerging Synthetic Technique for Catalysts. A Review

In the last few years, researchers have focused their attention on the synthesis of new catalyst structures based on or inspired by nature. Biotemplating involves the transfer of biological structures to inorganic materials through artificial mineralization processes. This approach offers the main advantage of allowing morphological control of the product, as a template with the desired morphology can be pre-determined, as long as it is found in nature. This way, natural evolution through millions of years can provide us with new synthetic pathways to develop some novel functional materials with advantageous properties, such as sophistication, miniaturization, hybridization, hierarchical organization, resistance, and adaptability to the required need. The field of application of these materials is very wide, covering nanomedicine, energy capture and storage, sensors, biocompatible materials, adsorbents, and catalysis. In the latter case, bio-inspired materials can be applied as catalysts requiring different types of active sites (i.e., redox, acidic, basic sites, or a combination of them) to a wide range of processes, including conventional thermal catalysis, photocatalysis, or electrocatalysis, among others. This review aims to cover current experimental studies in the field of biotemplating materials synthesis and their characterization, focusing on their application in heterogeneous catalysis.

Synthesis of manganese phosphate hybrid nanoflowers by collagen-templated biomineralization

Collagen provides an excellent biotemplate to modulate the morphology of manganese phosphate hybrid nanomaterials, leading to exquisite nanoflowers with branched petals.

Controlled fabrication of collagen-zinc phosphate hierarchical hybrid nanoflowers via a biomineralization process

Collagen-zinc phosphate hierarchical hybrid nanoflowers have been synthesized via a facile and environmentally amiable biomineralization strategy.

Protein-Mediated Biotemplating on the Nanoscale

Purified proteins offer a homogeneous population of biological nanoparticles, equipped in many cases with specific binding sites enabling the directed self-assembly of envisaged one-, two- or three-dimensional arrays. These arrays may serve as nanoscale biotemplates for the preparation of novel functional composite materials, which exhibit potential applications, especially in the fields of nanoelectronics and optical devices. This review provides an overview of the field of protein-mediated biotemplating, focussing on achievements made throughout the past decade. It is comprised of seven sections designed according to the size and configuration of the protein-made biotemplate. Each section describes the design and size of the biotemplate, the resulting hybrid structures, the fabrication methodology, the analytical tools employed for the structural analysis of the hybrids obtained, and, finally, their claimed/intended applications and a feasibility demonstration (whenever available). In conclusion, a short assessment of the overall status of the achievements already made vs. the future challenges of this field is provided.

Phage-Enabled Nanomedicine: From Probes to Therapeutics in Precision Medicine

Both lytic and temperate bacteriophages (phages) can be applied in nanomedicine, in particular, as nanoprobes for precise disease diagnosis and nanotherapeutics for targeted disease treatment. Since phages are bacteria-specific viruses, they do not naturally infect eukaryotic cells and are not toxic to them. They can be genetically engineered to target nanoparticles, cells, tissues, and organs, and can also be modified with functional abiotic nanomaterials for disease diagnosis and treatment. This Review will summarize the current use of phage structures in many aspects of precision nanomedicine, including ultrasensitive biomarker detection, enhanced bioimaging for disease diagnosis, targeted drug and gene delivery, directed stem cell differentiation, accelerated tissue formation, effective vaccination, and nanotherapeutics for targeted disease treatment. We will also propose future directions in the area of phage-based nanomedicines, and discuss the state of phage-based clinical trials.

Tuning the hierarchical nanostructure of hematite mesocrystals via collagen-templated biomineralization

The synthesis of hematite mesocrystals with a tunable hierarchical nanostructure plays a critical role in the construction of improved functional materials.

S-Layer-Based Nanocomposites for Industrial Applications

This chapter covers the fundamental aspects of bacterial S-layers: what are S-layers, what is known about them, and what are their main features that makes them so interesting for the production of nanostructures. After a detailed introduction of the paracrystalline protein lattices formed by S-layer systems in nature the chapter explores the engineering of S-layer-based materials. How can S-layers be used to produce "industry-ready" nanoscale bio-composite materials, and which kinds of nanomaterials are possible (e.g., nanoparticle synthesis, nanoparticle immobilization, and multifunctional coatings)? What are the advantages and disadvantages of S-layer-based composite materials? Finally, the chapter highlights the potential of these innovative bacterial biomolecules for future technologies in the fields of metal filtration, catalysis, and bio-functionalization.

Identification of multiple dityrosine bonds in materials composed of the Drosophila protein Ultrabithorax

The recombinant protein Ultrabithorax (Ubx), a Drosophila melanogaster Hox transcription factor, self-assembles into biocompatible materials in vitro that are remarkably extensible and strong. Here, we demonstrate that the strength of Ubx materials is due to intermolecular dityrosine bonds. Ubx materials auto-fluoresce blue, a characteristic of dityrosine, and bind dityrosine-specific antibodies. Monitoring the fluorescence of reduced Ubx fibers upon oxygen exposure reveals biphasic bond formation kinetics. Two dityrosine bonds in Ubx were identified by site-directed mutagenesis followed by measurements of fiber fluorescent intensity. One bond is located between the N-terminus and the homeodomain (Y4/Y296 or Y12/Y293), and another bond is formed by Y167 and Y240. Fiber fluorescence closely correlates with fiber strength, demonstrating that these bonds are intermolecular. To our knowledge, this is the first identification of specific residues that participate in dityrosine bonds in protein-based materials. The percentage of Ubx molecules harboring both bonds can be decreased or increased by mutagenesis, providing an additional mechanism to control the mechanical properties of Ubx materials. Duplication of tyrosine-containing motifs in Ubx increases dityrosine content in Ubx fibers, suggesting these motifs could be inserted in other self-assembling proteins to strengthen the corresponding materials.

Cross-linked protein crystals by glutaraldehyde and their applications

The mechanism of cross-linked protein crystals using glutaraldehyde, and their properties and applications are discussed in detail.

Rheology and simulation of 2-dimensional clathrin protein network assembly

Clathrin is a three-legged protein complex that assembles into lattice structures on the cell membrane and transforms into fullerene-like cages during endocytosis. This dynamic structural flexibility makes clathrin an attractive building block for guided assembly. The assembly dynamics and the mechanical properties of clathrin protein lattices are studied using rheological measurements and theoretical modelling in an effort to better understand two dynamic processes: protein adsorption to the interface and assembly into a network. We find that percolation models for protein network formation are insufficient to describe clathrin network formation, but with Monte Carlo simulations we can describe the dynamics of network formation very well. Insights from this work can be used to design new bio-inspired nano-assembly systems.

Design and biophysical characterization of atrazine-sensing peptides mimicking the Chlamydomonas reinhardtii plastoquinone binding niche

The plastoquinone (Q(B)) binding niche of the Photosystem II (PSII) D1 protein is the subject of intense research due to its capability to bind also anthropogenic pollutants. In this work, the Chlamydomonas reinhardtii D1 primary structure was used as a template to computationally design novel peptides enabling the binding of the herbicide atrazine. Three biomimetic molecules, containing the Q(B)-binding site in a loop shaped by two α-helices, were reconstituted by automated protein synthesis, and their structural and functional features deeply analysed by biophysical techniques. Standing out among the others, the biomimetic mutant peptide, D1pepMut, showed high ability to mimic the D1 protein in binding both Q(B) and atrazine. Circular dichroism spectra suggested a typical properly-folded α-helical structure, while isothermal titration calorimetry (ITC) provided a complete thermodynamic characterization of the molecular interaction. Atrazine binds to the D1pepMut with a high affinity (Kd = 2.84 μM), and a favourable enthalpic contribution (ΔH = -11.9 kcal mol(-1)) driving the interaction. Fluorescence spectroscopy assays, in parallel to ITC data, provided hyperbolic titration curves indicating the occurrence of a single atrazine binding site. The binding resulted in structural stabilisation of the D1pepMut molecule, as suggested by atrazine-induced cooperative profiles for the fold-unfold transition. The interaction dynamics and the structural stability of the peptides in response to the ligand were particularly considered as mandatory parameters for biosensor/biochip development. These studies paved the way to the set-up of an array of synthetic mutant peptides with a wide range of affinity towards different classes of target analytes, for the development of optical nanosensing platforms for herbicide detection.

Insights into biogenic and chemical production of inorganic nanomaterials and nanostructures

The synthesis of inorganic nanomaterials and nanostructures by the means of diverse physical, chemical, and biological principles has been developed in recent decades. The nanoscale materials and structures creation continue to be an active area of researches due to the exciting properties of the resulting nanomaterials and their innovative applications. Despite physical and chemical approaches which have been used for a long time to produce nanomaterials, biological resources as green candidates that can replace old production methods have been focused in recent years to generate various inorganic nanoparticles (NPs) or other nanoscale structures. Cost-effective, eco-friendly, energy efficient, and nontoxic produced nanomaterials using diverse biological entities have been received increasing attention in the last two decades in contrast to physical and chemical methods owe using toxic solvents, generate unwanted by-products, and high energy consumption which restrict the popularity of these ways employed in nanometric science and engineering. In this review, the biosynthesis of gold, silver, gold-silver alloy, magnetic, semiconductor nanocrystals, silica, zirconia, titania, palladium, bismuth, selenium, antimony sulfide, and platinum NPs, using bacteria, actinomycetes, fungi, yeasts, plant extracts and also informational bio-macromolecules including proteins, polypeptides, DNA, and RNA have been reported extensively to mention the current status of the biological inorganic nanomaterial production. In other hand, two well-known wet chemical techniques, namely chemical reduction and sol-gel methods, used to produce various types of nanocrystalline powders, metal oxides, and hybrid organic-inorganic nanomaterials have presented.

Manipulating energy landscapes to tune ordering in biotemplated nanoparticle arrays

Two-dimensional non-close-packed crystals of the protein streptavidin, grown on phospholipid membranes, can serve as nanoscale templates capable of directing the formation of ordered nanoparticle arrays through site-specific electrostatic adsorption. Here we examine the effects of both interparticle and nanoparticle/lipid membrane electrostatic interactions on the degree of structural order exhibited by the templated nanoparticle array. Interparticle electrostatic repulsion is shown to have only marginal influence on nanoparticle ordering. In contrast, the degree of order exhibited by the templated array can be tuned by controlling the charge on the lipid membrane. Analysis of the local and global structure of arrays generated with negatively charged gold nanoparticles (∼6 nm) indicate improved long-range order when the lipid membrane supporting the protein crystal is derived from cationic lipid molecules as opposed to zwitterionic phospholipids. Furthermore, as nanoparticle size is reduced (∼3 nm), the presence of a charged lipid membrane is found to be essential, as smaller particles do not adhere to streptavidin crystals grown on zwitterionic membranes. These findings demonstrate that the composition of the lipid support can influence the efficacy of directed-assembly processes which utilize protein templates and are important results toward enhancing control over bottom-up nanofabrication applications.

Size dictates mechanical properties for protein fibers self-assembled by the Drosophila hox transcription factor ultrabithorax

The development of protein-based materials with diverse mechanical properties will facilitate the realization of a broad range of potential applications. The recombinant Drosophila melanogaster transcription factor Ultrabithorax self-assembles under mild conditions in aqueous buffers into extremely extensible materials. By controlling fiber diameter, both the mechanism of extension and the magnitude of the mechanical properties can be varied. Narrow Ultrabithorax fibers (diameter <10 μm) extend elastically, whereas the predominantly plastic deformation of wide fibers (diameter >15 μm) reflects the increase in breaking strain with increasing diameter, apparently due to a change in structure. The breaking stress/strain of the widest fibers resembles that of natural elastin. Intermediate fibers display mixed properties. Fiber bundles retain the mechanical properties of individual fibers but can withstand much larger forces. Controlling fiber size and generating fiber superstructures is a facile way to manipulate the mechanical characteristics of protein fibers and rationally engineer macroscale protein-based materials with desirable properties.

Biotemplating of metallic nanoparticle arrays through site-specific electrostatic adsorption on streptavidin crystals

The protein streptavidin exhibits unique properties advantageous for "bottom-up" nanofabrication applications. It self-assembles into various 2-D crystalline lattices onto which nanoparticles can be attached through both electrostatic and ligand-receptor mechanisms. We examine the electrostatic adsorption of gold nanoparticles onto non-close-packed streptavidin crystals and show that site-specific attachment preferentially occurs in between protein molecules. The resulting nanoparticle arrangement consequently displays a long-range structural coherence with the underlying protein lattice, although with a reduced degree of order relative to that of the biological template. Monte Carlo simulations reveal that this remittent ordering is due to (1) the random offset between the nanoparticles and their respective adsorption sites and (2) nonspecific binding to the surface of the protein molecules. Overall, our results indicate that streptavidin crystals are capable of templating ordered nanoparticle arrays.

Modification of protein crystal packing by systematic mutations of surface residues: implications on biotemplating and crystal porosity

Bioinspired nano-scale biotemplating for the development of novel composite materials has recently culminated in several demonstrations of nano-structured hybrid materials. Protein crystals, routinely prepared for the elucidation of protein 3D structures by X-ray crystallography, present an ordered and highly accurate 3D array of protein molecules. Inherent to the 3D arrangement of the protein "building blocks" in the crystal, a complementary 3D array of interconnected cavities--voids array, exhibiting highly ordered porosity is formed. The porous arrays of protein crystal may serve as a nano-structured, accurate biotemplate by a "filling" process. These cavities arrays are shaped by the mode of protein packing throughout the crystallization process. Here we propose and demonstrate feasibility of targeting site specific mutations to modify protein's surface to affect protein crystal packing, enabling the generation of a series of protein crystal "biotemplates" all originating from same parent protein. The selection of these modification sites was based on in silico analysis of protein-protein interface contact areas in the parent crystal. The model protein selected for this study was the N-terminal type II cohesin from the cellulosomal scaffold in ScaB subunit of Acetivibrio cellulolyticus and mutations were focused on lysine residues involved in protein packing as prime target. The impact of systematically mutating these lysine residues on protein packing and its resulting interconnected cavities array were found to be most significant when surface lysine residues were substituted to tryptophan residues. Our results demonstrate the feasibility of using pre-designed site directed mutations for the generation of a series of protein crystal biotemplates from a "parent" protein.

Rational shape engineering of the filamentous protein gamma prefoldin through incremental gene truncation

An enticing possibility in nanotechnology is to use proteins as templates for the positioning of molecules in regular patterns with nanometer precision over large surface areas. However, the ability to redesign protein quaternary structure to construct new shapes remains underdeveloped. In the present work, we have engineered the dimensions of a filamentous protein, the gamma prefoldin (gamma PFD) from the hyperthermophile Methanocaldococcus jannaschii, and have achieved controllable attachment of filaments in a specific orientation on a carbon surface. Four different constructs of gamma PFD were generated in which the coiled coils extending from the association domain are progressively truncated. Three of the truncation constructs form well-defined filaments with predictable dimensions according to transmission electron microscopy. Two of these constructs had 2D persistence lengths similar to that of gamma PFD at 300-740 nm. In contrast, the 2D persistence length of the shortest truncation mutant was 3500 nm, indicating that the filament adsorbs along a different axis than the other constructs with its two rows of coiled coils facing out from the surface. The elastic moduli of the filaments range from 0.7-2.1 GPa, similar to rigid plastics and within the lower limit for proteins whose primary intermolecular interaction is hydrogen bonding. These results demonstrate a versatile approach for controlling the overall dimensions and surface orientation of protein filaments, and expand the toolbox by which to tune two overall dimensions in protein space for the creation of templated materials over a wide variety of conditions. (c) 2009 Wiley Periodicals, Inc. Biopolymers 91: 496-503, 2009.

Biological fabrication of photoluminescent nanocomb structures by metabolic incorporation of germanium into the biosilica of the diatom Nitzschia frustulum

Diatoms are single-celled algae that make microscale silica shells or "frustules" with intricate nanoscale features such as two-dimensional pore arrays. In this study, the metabolic insertion of low levels of germanium into the frustule biosilica of the pennate diatom Nitzschia frustulum by a two-stage cultivation process induced the formation of frustules which strongly resembled double-sided nanocomb structures. The final product from the two-stage cultivation process contained 0.41 wt % Ge in biosilica and consisted of an equal mixture of parent frustule valves possessing a normal two-dimensional array of 200 nm pores and daughter valves possessing the nanocomb structure. The nanocomb structures had overall length of 8 mum, rib width of 200 nm, rib length of 500 nm, and slit width of 100 nm. Each slit of the nanocomb was most likely formed by a directed morphology change of a row of 200 nm pores to a single open slit following Ge incorporation into the developing frustule during the final cell division. The frustules possessed blue photoluminescence at peak wavelengths between 450 and 480 nm, which was attributed to contributions from nanostructured biosilica in both the parent valves and in the nanocomb daughter valves. This is the first reported study of using a cell culture system to biologically fabricate a photoluminescent nanocomb structure.