Synthesis, chemistry, physicochemical properties and industrial applications of amino acid surfactants: A review

Molecular simulation screening and sensory evaluation unearth a novel kokumi compound with bitter-masking effect: N-lauroyl-L-tryptophan

N-lauroyl-L-tryptophan (LT), which has the strongest potential flavor-presenting activity, was skillfully screened from numerous N-Lau-AAs docked to different taste receptors by molecular simulation techniques. Subsequently, LT was synthesized employing food-grade commercial enzymes and structurally characterized, the optimized yields of LT could reach 69.08%, 76.16%, and 50.40%, respectively. Sensory and E-tongue evaluations showed that LT at 1 mg/L significantly benefited the performance of different taste sensations and exhibited different bitter taste masking effects: L-Ile (68.42%), L-Trp (68.18%), D-salicylic acid (48.48%) and quinine (35.00%). The molecular docking results illustrated that LT had a high affinity for various taste receptors, dominated by hydrogen bonding and hydrophobic interactions. This work provided a rare systematic elucidation of the potential and mechanism of enzymatically synthesized LT in enhancing taste properties. It provides novel insights into the directions and strategies for the excavation and innovation of flavor enhancers and food flavors.

AAontology: An ontology of amino acid scales for interpretable machine learning

Amino acid scales are crucial for protein prediction tasks, many of them being curated in the AAindex database. Despite various clustering attempts to organize them and to better understand their relationships, these approaches lack the fine-grained classification necessary for satisfactory interpretability in many protein prediction problems. To address this issue, we developed AAontology-a two-level classification for 586 amino acid scales (mainly from AAindex) together with an in-depth analysis of their relations-using bag-of-word-based classification, clustering, and manual refinement over multiple iterations. AAontology organizes physicochemical scales into 8 categories and 67 subcategories, enhancing the interpretability of scale-based machine learning methods in protein bioinformatics. Thereby it enables researchers to gain a deeper biological insight. We anticipate that AAontology will be a building block to link amino acid properties with protein function and dysfunctions as well as aid informed decision-making in mutation analysis or protein drug design.

Structural Characteristics, Electronic Properties, and Coupling Behavior of 12-4-12, 12-3-12, 12-2-12 Cationic Surfactants: A First-Principles Computational Investigation and Experimental Raman Spectroscopy

In this study, we present a comprehensive first-principles computational investigation focused on the structural characteristics, electronic properties, and coupling integrations of three cationic Gemini surfactants: 12-4-12, 12-3-12, and 12-2-12 ((CH3(CH2)11)(CH3)2-N+-(CH2)n-N+(CH3(CH2)11)(CH3)2, where n = 2, 3, or 4). By employing Density Functional Theory (DFT) computations, we aimed to gain insights into the fundamental aspects of these surfactant molecules, and the intermolecular interactions among these surfactant molecules. We examined different conformers of each surfactant, including parallel, wing, and bent conformers, and compared their relative stability and properties. We elucidated that the complex structural characteristics, electronic properties, and molecular arrangements of the surfactants vary according to the number of carbon atoms in the central spacer. We also conducted experimental Raman spectroscopy on the three surfactants to compare the results with our computational findings. Furthermore, we computed the coupling behaviors of different conformers of 12-4-12 surfactants in order to gain insights into their coupling mechanism.

Antimicrobial and Anesthetic Niosomal Formulations Based on Amino Acid-Derived Surfactants

BACKGROUND

This work proposes the development of new vesicular systems based on anesthetic compounds (lidocaine (LID) and capsaicin (CA)) and antimicrobial agents (amino acid-based surfactants from phenylalanine), with a focus on physicochemical characterization and the evaluation of antimicrobial and cytotoxic properties.

METHOD

Phenylalanine surfactants were characterized via high-performance liquid chromatography (HPLC) and nuclear magnetic resonance (NMR). Different niosomal systems based on capsaicin, lidocaine, cationic phenylalanine surfactants, and dipalmitoyl phosphatidylcholine (DPPC) were characterized in terms of size, polydispersion index (PI), zeta potential, and encapsulation efficiency using dynamic light scattering (DLS), transmitted light microscopy (TEM), and small-angle X-ray scattering (SAXS). Furthermore, the interaction of the pure compounds used to prepare the niosomal formulations with DPPC monolayers was determined using a Langmuir balance. The antibacterial activity of the vesicular systems and their biocompatibility were evaluated, and molecular docking studies were carried out to obtain information about the mechanism by which these compounds interact with bacteria.

RESULTS

The stability and reduced size of the analyzed niosomal formulations demonstrate their potential in pharmaceutical applications. The nanosystems exhibit promising antimicrobial activity, marking a significant advancement in pharmaceutical delivery systems with dual therapeutic properties. The biocompatibility of some formulations underscores their viability.

CONCLUSIONS

The proposed niosomal formulations could constitute an important advance in the pharmaceutical field, offering delivery systems for combined therapies thanks to the pharmacological properties of the individual components.

Computational predictions of interfacial tension, surface tension, and surfactant adsorption isotherms

All-atom (AA) molecular dynamics (MD) simulations are employed to predict interfacial tensions (IFT) and surface tensions (ST) of both ionic and non-ionic surfactants. The general AMBER force field (GAFF) and variants are examined in terms of their performance in predicting accurate IFT/ST, γ, values for chosen water models, together with the hydration free energy, ΔGhyd, and density, ρ, predictions for organic bulk phases. A strong correlation is observed between the quality of ρ and γ predictions. Based on the results, the GAFF-LIPID force field, which provides improved ρ predictions is selected for simulating surfactant tail groups. Good γ predictions are obtained with GAFF/GAFF-LIPID parameters and the TIP3P water model for IFT simulations at a water-triolein interface, and for GAFF/GAFF-LIPID parameters together with the OPC4 water model for ST simulations at a water-vacuum interface. Using a combined molecular dynamics-molecular thermodynamics theory (MD-MTT) framework, a mole fraction of C12E6 molecule of 1.477 × 10-6 (from the experimental critical micelle concentration, CMC) gives a simulated surface excess concentration, ΓMAX, of 76 C12E6 molecules at a 36 nm2 water-vacuum surface (3.5 × 10-10 mol cm-2), which corresponds to a simulated ST of 35 mN m-1. The results compare favourably with an experimental ΓMAX of C12E6 of 3.7 × 10-10 mol cm-2 (80 surfactants for a 36 nm2 surface) and experimental ST of C12E6 of 32 mN m-1 at the CMC.

Exploring solubility and energetics: Dissolution of biologically important l-threonine in diverse aqueous organic mixtures across the temperature range of 288.15 K to 308.15 K

This research provides a thorough investigation into the solubility behavior and solution thermodynamics of l-threonine in significant organic solvent systems. The work was done on measuring the actual solubility and subsequently calculating overall transfer solvation free energetics (∆Genergetic0i) and transfer entropies (∆St0i) at a temperature of 298.15 K. These measurements were performed as l-threonine transitioned from water to different water-organic mixed solvents systems. The saturated solubilities of l-threonine were determined using the 'gravimetric method' at five equidistant temperatures namely 288.15 K, 293.15 K, 298.15 K, 303.15 K and 308.15 K. By analyzing the data on solubility, we further obtained the different energies involved in solvation related issues. In the case of single solvents, the nature of solubility of l-threonine was observed like: dimethylsulfoxide (DMSO) < acetonitrile (ACN) < N, N-dimethylformamide (DMF) < ethylene glycol (EG) < water (H2O), irrespective of the experimental conditions. Specifically, at 298.15 K, the solubilities of l-threonine in single solvents were found to be as follows: 0.8220 mol per kg of water, 0.3101 mol per kg of EG, 0.1337 mol per kg of DMF, 0.1107 mol per kg DMSO and 0.1188 mol per kg of ACN. This research critically examines the relationship between the experimental saturated solubility of l-threonine and the complex properties influencing its solvation energy in diverse aqueous organic solvent systems.

A study on the bio-based surfactant sodium cocoyl alaninate as a foaming agent for enhanced oil recovery in high-salt oil reservoirs

Environmental awareness is receiving increasing attention in the petroleum industry, especially when associated with chemical agents applied in enhanced oil recovery (EOR) technology. The bio-based surfactant sodium cocoyl alaninate (SCA) is environmentally friendly and can be easily biodegraded, which makes it a promising alternative to traditional surfactants. Herein, the SCA surfactant is proposed as a foaming agent for enhanced oil recovery. Laboratory investigations on the surfactant concentration, foaming performance, microbubble characterization, interfacial tension, and foam-flooding of the traditional surfactants SDS and OP-10 have been conducted. In particular, the anti-salt abilities of these three surfactants have been studied, taking into consideration the reservoir conditions at Bohai Bay Basin, China. The results show that concentrations of 0.20 wt%, 0.20 wt% and 0.50 wt% for SCA, SDS and OP-10, respectively, can achieve optimum foaming ability and foaming stability under formation salinity conditions, and 0.20 wt% SCA achieved the best foaming ability and stability compared to 0.20 wt% SDS and 0.50 wt% OP-10. Sodium fatty acid groups and amino acid groups present in the SCA molecular structure have high surface activities under different salinity conditions, making SCA an excellent anti-salt surfactant for enhanced oil recovery. The microstructure analysis results showed that most of the SCA bubbles were smaller in size, with an average diameter of about 150 μm, and the distribution of SCA bubbles was more uniform, which can reduce the risk of foam coalescence and breakdown. The IFT value of the SCA/oil system was measured to be 0.157 mN m-1 at 101.5 °C, which was the lowest. A lower IFT can make liquid molecules more evenly distributed on the surface, and enhance the elasticity of the foam film. Core-flooding experimental results showed that a 0.30 PV SCA foam and secondary waterflooding can enhance oil recovery by more than 15% after primary waterflooding, which can reduce the mobility ratio from 3.7711 to 1.0211. The more viscous SCA foam caused a greater flow resistance, and effectively reduced the successive water fingering, leading to a more stable driving process to fully displace the remaining oil within the porous media. The bio-based surfactant SCA proposed in this paper has the potential for application in enhanced oil recovery in similar high-salt oil reservoirs.

Surfactants as biodegradable sustainable inhibitors for corrosion control in diverse media and conditions: A comprehensive review

BACKGROUND

Corrosion is a challenging and potentially harmful process that involves the continuing, impulsive deterioration of metallic structures via reactions involving environmental components and electro- or chemical processes. To inhibit corrosion, various additives are added. Traditional additives, on the other hand, contain environmentally hazardous substances. Surfactants are less expensive, easier to manufacture, and have high inhibitory efficacy and low toxicity compared to standard corrosion inhibitors. They are often employed as corrosion inhibitors to protect metallic materials against corrosion.

METHODS

Surfactant molecules' amphiphilic nature promotes adsorption at surfaces such as the metal/metal oxide-water interface. Surfactant adsorption on metals and metal oxides forms a barrier that can prevent corrosion.

SIGNIFICANT FINDINGS

This review of surfactants as corrosion inhibitors aims to offer a systemic evaluation of various surfactant physical and chemical properties, surfactant influence in corrosion inhibition, and surfactant used in corrosion inhibition that can be used to enhance the efficacy of surfactant use as corrosion inhibitors in a variety of environments. The effect of several parameters on the potential to suppress corrosion of surfactant molecule series is also discussed here.

Quaternary Ammonium Salts of Cationic Lipopeptides with Lysine Residues - Synthesis, Antimicrobial, Hemolytic and Cytotoxic Activities

Ultrashort cationic lipopeptides (USCLs) and quaternary ammonium salts constitute two groups of cationic surfactants with high antimicrobial activity. This study aimed to investigate the influence of quaternization of the amino group of the lysine side chain in USCLs on their antimicrobial, hemolytic and cytotoxic activities. To do this, two series of lipopeptides were synthesized, USLCs and their quaternized analogues containing trimethylated lysine residues - qUSCLs (quaternized ultrashort cationic lipopeptides). Quaternization was performed on a resin during a standard solid-phase peptide synthesis with CH3I as the methylating agent. According to our knowledge, this is the first study presenting on-resin peptide quaternization. The lipopeptides were tested for their antibacterial and antifungal activities against the ESKAPE group (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa and Klebsiella aerogenes) bacteria and Candida glabrata yeast-like fungus. Most of the compounds proved to be active antimicrobial agents with enhanced activity against Gram-positive strains and fungi and a lower against Gram-negative species. In addition, the antimicrobial activity of lipopeptides was increasing with an increase in hydrophobicity but qUSCLs exhibited usually a poorer antimicrobial activity than their parent molecules. Furthermore, the toxicity against red blood cells and human keratinocytes was assessed. It's worth emphasizing that qUSCLs were less toxic than the parent molecules of comparative hydrophobicity. The results of the study proved that qUSCLs can offer a higher selectivity to pathogens over human cells than that of USCLs. Last but not least, quaternization of the peptides could increase their solubility and therefore their bioavailability and utility.

Green Surfactants (Biosurfactants): A Petroleum-Free Substitute for Sustainability-Comparison, Applications, Market, and Future Prospects

Surfactants are a group of amphiphilic molecules (i.e., having both hydrophobic and hydrophilic domains) that are a vital part of nearly every contemporary industrial process such as in agriculture, medicine, personal care, food, and petroleum. In general surfactants can be derived from (i) petroleum-based sources or (ii) microbial/plant origins. Petroleum-based surfactants are obvious results from petroleum products, which lead to petroleum pollution and thus pose severe problems to the environment leading to various ecological damages. Thus, newer techniques have been suggested for deriving surfactant molecules and maintaining environmental sustainability. Biosurfactants are surfactants of microbial or plant origins and offer much added advantages such as high biodegradability, lesser toxicity, ease of raw material availability, and easy applicability. Thus, they are also termed "green surfactants". In this regard, this review focused on the advantages of biosurfactants over the synthetic surfactants produced from petroleum-based products along with their potential applications in different industries. We also provided their market aspects and future directions that can be considered with selections of biosurfactants. This would open up new avenues for surfactant research by overcoming the existing bottlenecks in this field.

Characterization of Micelle Formation by the Single Amino Acid-Based Surfactants Undecanoic L-Isoleucine and Undecanoic L-Norleucine in the Presence of Diamine Counterions with Varying Chain Lengths

The binding of linear diamine counterions with different methylene chain lengths to the amino-acid-based surfactants undecanoic L-isoleucine (und-IL) and undecanoic L-norleucine (und-NL) was investigated with NMR spectroscopy. The counterions studied were 1,2-ethylenediamine, 1,3-diaminopropane, 1,4-diaminobutane, 1,5-diaminopentane, and 1,6-diaminohexane. These counterions were all linear diamines with varying spacer chain lengths between the two amine functional groups. The sodium counterion was studied as well. Results showed that when the length of the counterion methylene chain was increased, the surfactants’ critical micelle concentrations (CMC) decreased. This decrease was attributed to diamines with longer methylene chains binding to multiple surfactant monomers below the CMC and thus acting as templating agents for the formation of micelles. The entropic hydrophobic effect and differences in diamine counterion charge also contributed to the size of the micelles and the surfactants’ CMCs in the solution. NMR diffusion measurements showed that the micelles formed by both surfactants were largest when 1,4-diaminobutane counterions were present in the solution. This amine also had the largest mole fraction of micelle-bound counterions. Finally, the und-NL micelles were larger than the und-IL micelles when 1,4-diaminobutane counterions were bound to the micelle surface. A model was proposed in which this surfactant formed non-spherical aggregates with both the surfactant molecules’ hydrocarbon chains and n-butyl amino acid side chains pointing toward the micelle core. The und-IL micelles, in contrast, were smaller and likely spherically shaped.

Biodegradable Cationic and Ionizable Cationic Lipids: A Roadmap for Safer Pharmaceutical Excipients

Cationic and ionizable cationic lipids are broadly applied as auxiliary agents, but their use is associated with adverse effects. If these excipients are rapidly degraded to endogenously occurring metabolites such as amino acids and fatty acids, their toxic potential can be minimized. So far, synthesized and evaluated biodegradable cationic and ionizable cationic lipids already showed promising results in terms of functionality and safety. Within this review, an overview about the different types of such biodegradable lipids, the available building blocks, their synthesis and cleavage by endogenous enzymes is provided. Moreover, the relationship between the structure of the lipids and their toxicity is described. Their application in drug delivery systems is critically discussed and placed in context with the lead compounds used in mRNA vaccines. Moreover, their use as preservatives is reviewed, guidance for their design is provided, and an outlook on future developments is given.

Adding knowledge to the design of safer hydrophobically modified poly(acrylic) acids: an ecotoxicological approach

The architecture of hydrophobically modified polymers can be tailored to produce variants with different levels of functionality. This allows industry to apply rational design methods for the development of more environmentally friendly materials. In the present work, the ecotoxicity of six variants of hydrophobically modified poly(acrylic) acids (HMPAA), obtained by changing the crosslinked conformation, insertion position, and length of the hydrophobic groups, was assessed for the (i) bioluminescence production of Aliivibrio fischeri; (ii) population growth rate of Raphidocelis subcapitata and Chlorella vulgaris; (iii) mortality of Brachionus calyciflorus; (iv) feeding inhibition, somatic growth rate, reproduction, and mortality of Daphnia magna; and (iv) mortality and somatic growth rate of Pelophylax perezi tadpoles. The concentrations causing 50% and 20% of effects (L(E)C50 and 20, respectively) ranged from 9.64 up to > 2000 mg·L-1 for all six HMPAA and species. The bacterium A. fischeri and tadpoles of P. perezi were the most sensitive and most tolerant organisms to the six tested HMPAA, respectively. The computed 5% hazard concentrations (computed on the basis of L(E)C50 s) showed that HMPAA1 (13.0 mg·L-1) and HMPAA2 (26.1 mg·L-1) were the most toxic variants, while HMPAA6 (233 mg·L-1) the least one. These results suggest HMPAA6 (with low crosslink percentage modified by the addition of long and short hydrophobic groups at the surface) to be the most environmentally friendly variant and should be preferentially considered to be used in consumer products, compared to the other five studied variants.

Green surfactants for corrosion control: Design, performance and applications

Surfactants enjoy an augmented share of hydrophilicity and hydrophobicity and are well-known for their anticorrosive potential. The use of non-toxic surfactants is gaining growing interest because of the scaling demands of green chemistry. Green surfactants have successfully replaced traditional toxic surfactant-based corrosion inhibitors. Recently, many reports described the corrosion inhibition potential of green surfactants. The present article aims to describe the recent advancements in using green surfactants in corrosion mitigation. They create a charge transfer barrier through their adsorption at the interface of the metal and the environment. Their adsorption is well explained by the Langmuir adsorption isotherm. In the adsorbed layer, their hydrophilic polar heads orient toward the metal side and their hydrophobic tails orient toward the solution side. They block the active sites and retard the anodic and cathodic and act as mixed-type inhibitors. Their adsorption and bonding nature are fruitfully supported by surface analyses. They can form mono- or multilayers depending upon the nature of the metal, electrolyte and experimental conditions. The challenges and opportunities of using green surfactants as corrosion inhibitors have also been described.

A Review on Interactions between Amino Acids and Surfactants as Well as Their Impact on Corrosion Inhibition

Amino acid-surfactant interactions are central to numerous studies because of their increased effectiveness in chemical, biological, household and industrial use. This review will focus on the impact and effect of the physicochemical properties, temperature, pH, and surfactant chain length of the amino acid for detailed exploration of amino acids and surfactants in aqueous medium. The impact of cosolvent on self-aggregation, critical micelle concentration (CMC), and binding affinity with other biomolecules, as well as amino acid-surfactant interactions, are the epicenters. The results show that increasing the temperature causes negative enthalpy for ionic surfactants and micellization, implying that micellization and amino acids are thermodynamically spontaneous and exothermic, accompanied by positive entropy. As these physicochemical studies are additive, the amino acid and ionic surfactant interactions provide clues on protein unfolding and denaturation under different media, which further changes with a change in physiological conditions like pH, cosolvent, chain length, and temperature. On varying the pH, the net charge of the amino acid also changes and, subsequently, the binding efficiency of the amino acids to the surfactants. The presence of cosolvent causes a lowering in the hydrophobic chain, which changes the surfactant's CMC. At a reduced CMC, the hydrophobic characteristic of amino acid-surfactant associations is amplified, leading to rapid denaturation of proteins that act as propulsion under the influence of extended chain surfactants. Amino acids are one of the most intriguing classes of chemicals that produce high inhibitory efficacy. Amino acids are also a component of proteins and therefore, found in a significant part of the human body, further making them a promising candidate as corrosion inhibitors. In this review article, authors have also focused on the collection and investigation for application of amino acid-surfactant interactions in corrosion inhibition. Various predictive studies/in silico studies are also reported by many research groups, such as density functional theory (DFT) calculations and molecular dynamics simulations to obtain tentative electronic, structural, and physiochemical characteristics like energies of the highest occupied molecular orbitals and lowest unoccupied molecular orbitals, binding energy, Gibb's free energy, electronegativity, polarizability, and entropy. In silico studies are helpful for the mechanism predictions of the process occurring on metal surfaces.

New aspects of lipopeptide-incorporated nanoparticle synthesis and recent advancements in biomedical and environmental sciences: a review

The toxicity of metal nanoparticles has introduced promising research in the current scenario since an enormous number of people have been potentially facing this problem in the world. The extensive attention on green nanoparticle synthesis has been focussed on as a vital step in bio-nanotechnology to improve biocompatibility, biodegradability, eco-friendliness, and huge potential utilization in various environmental and clinical assessments. Inherent influence on the study of green nanoparticles plays a key role to synthesize the controlled and surface-influenced molecule by altering the physical, chemical, and biological assets with the provision of various precursors, templating/co-templating agents, and supporting solvents. However, in this article, the dominant characteristics of several kinds of lipopeptide biosurfactants are discussed to execute a critical study of factors affecting synthesis procedure and applications. The recent approaches of metal, metal oxide, and composite nanomaterial synthesis have been deliberated as well as the elucidation of the reaction mechanism. Furthermore, this approach shows remarkable boosts in the production of nanoparticles with the very less employed harsh and hazardous processes as compared to chemical or physical method-based nanoparticle synthesis. This study also shows that the advances in strain selection for green nanoparticle production could be a worthwhile and strong economical approach in futuristic medical science research.

Selective Partition of Lipopeptides from Fermentation Broth: A Green and Sustainable Approach

Lipopeptide (LP) biosurfactants from microbes have the potential to gradually replace chemical synthetic surfactants and fit the contemporary green and sustainable industrial production concept. However, their active participation is comparatively low in the global market pertaining to their low yield in microbial broth and costly downstream processes arising due to tedious isolation and purification methods. Herein, an efficient extraction method is developed that utilizes an aqueous biphasic system (ABS) comprising ionic liquids and polypropylene glycol 400 (PPG) to selectively extract a mixture of cyclic lipopeptides, namely, surfactin and fengycin from the culture broth of Bacillus amyloliquefaciens 5NPA-1, isolated from the halophyte Salicornia brachiata Roxb. Out of four different ABSs, the ABS composed of 2-hydroxyethyl ammonium formate and PPG displayed a maximum extraction efficiency of 82.30%. PPG-rich phase containing lipopeptides exhibited excellent antimicrobial and mosquito larvicidal properties with no toxic effect on plants. The developed method is simple, novel and accelerates the application of cyclic lipopeptides produced by the microbial source.

Hydrophobisation of Silica Nanoparticles Using Lauroyl Ethyl Arginate and Chitosan Mixtures to Induce the Foaming Process

We studied silica suspensions with chitosan and biodegradable synthetic surfactant lauroyl ethyl arginate (LAE). Hydrophilic and negatively charged silica nanoparticles were neutralised due to the coating with chitosan. That presence of LAE led to the partial hydrophobisation of their surface, which favoured their attachment to the surface of a thin foam film. It was found that the presence of small and medium-sized (6–9 nm) hydrophobic particles in the interfacial layer of lamella foam film inhibited the coalescence and coarsening processes, which prolonged the life of the foam. Furthermore, hydrophobising of 30 nm particles allowed the formation of large aggregates precipitating from the mixture under steady-state conditions. These aggregates, however, under the conditions of the dynamic froth flotation process in the foam column, were floated into the foam layer. As a result, they were trapped in the foam film and Plateau borders, effectively preventing liquid leakage out of the foam. These results demonstrate the efficiency of using chitosan-LAE mixtures to remove silica nanoparticles from aqueous phase by foaming and flotation.

Recent advances of biosurfactant for waste and pollution bioremediation: Substitutions of petroleum-based surfactants

Biosurfactant is one of the emerging compounds in the industrial sector that behaves similarly with their synthetic counterparts, as they can reduce surface and interfacial tension between two fluids. Their unique properties also enable biosurfactant molecules to be able to clump together to form micelles that can capture targeted molecules within a solution. Biosurfactants are compared with synthetic surfactants on various applications for which the results shows that biosurfactants are fully capable of replacing synthetic surfactants in applications including enhanced oil recovery and wastewater treatment applications. Biosurfactants are able to be used in different applications as well since they are less toxic than synthetic surfactants. These applications include bioremediation on oil spills in the marine environment and bioremediation for contaminated soil and water, as well as a different approach on the pharmaceutical applications. The future of biosurfactants in the pharmaceutical industry and petroleum industry as well as challenges faced for implementing biosurfactants into large-scale applications are also discussed at the end of this review.

Hydrogel Formation by Glutamic-acid-based Organogelator Using Surfactant-mediated Gelation

Hydrogels formed by low-molecular-weight gelators have reversible sol-gel transition and responsiveness to various stimuli, and are used in cosmetics and drug applications. It is challenging to obtain hydrogels using novel gelators because subtle differences in their molecular architecture affect gelation. Organogelators (which form organogels) are insoluble in water, and their use as hydrogelators has not previously been considered. However, a surfactant-mediated gelation method was reported in which organogelators were solubilized in water by surfactants to form hydrogels using 12-hydroxyoctadecanoic acid. To investigate whether this method can be applied with other organogelators, the formation of hydrogel using a glutamic-acid-based organogelator was studied here. Hydrogels were formed by solubilizing 1:1 mixtures of glutamate-based organogelators, N-lauroyl-L-glutamic acid dibuthylamide, and N-2-ethylhexanoyl-L-glutamic acid dibutylamide in aqueous micellar solutions of anionic surfactant (sodium lauroyl glutamate) and cationic surfactant (cetyltrimethylammonium chloride). The minimum gelation concentration of the hydrogel was ~0.2-0.6 wt%. By changing the molar fraction of cetyltrimethylammonium chloride in the mixed surfactant, either spherical or wormlike micelles were formed. The hydrogel with wormlike micelles had a higher sol-gel transition temperature than that with spherical micelles and formed fine self-assembled fibrillar networks. Additionally, the hydrogel with the spherical micelles was elastic, whereas that with wormlike micelles was viscoelastic, suggesting that networks of the organogelators and wormlike micelles coexisted in the hydrogel from the wormlike micellar solution. Moreover, the hydrogel suppressed the reduction in the storage modulus at higher temperatures compared with the micellar aqueous solution, indicating that the elastic properties of the organogelator networks were maintained at high temperatures. The gel fibers of the hydrogel partially formed a loosely aggregated structure as the temperature increased, the fibers bundled via hydrophobic interactions, and new cross-linking points formed spontaneously. This phenomenon corresponded with an inflection point in the temperature-dependent storage modulus of the hydrogel.

Surfactant stabilized gold nanomaterials for environmental sensing applications - A review

Surfactant stabilized Gold (Au) nanomaterials (NMs) have been documented extensively in recent years for numerous sensing applications in the academic literature. Despite the crucial role these surfactants play in the sensing applications, the comprehensive reviews that highlights the fundamentals associated with these assemblies and impact of these surfactants on the properties and sensing mechanisms are still quite scare. This review is an attempt in organizing the vast literature associated with this domain by providing critical insights into the fundamentals, preparation methodologies and sensing mechanisms of these surfactant stabilized Au NMs. For the simplification, the surfactants are divided into the typical and advanced surfactants and the Au NMs are classified into Au nanoparticles (NPs) and Au nanoclusters (NCs) depending upon the complexity in structure and size of the NMs respectively. The preparative methodologies are also elaborated for enhancing the understanding of the readers regarding such assemblies. The case studies regarding surfactant stabilized Au NMs were further divided into colorimetric sensors, surface plasmonic resonance (SPR) based sensors, luminescence-based sensors, and electrochemical/electrical sensors depending upon the property utilized by the sensor for the sensing of an analyte. Future perspectives are also discussed in detail for the researchers looking for further progress in that particular research domain.

Study on the synthesis and performance of sodium 2-laurylamido isobutyrate

In the present work, sodium 2-laurylamido isobutyrate was synthesized from 2-aminoisobutyric acid, NaOH and lauroyl chloride by the Schotten-Baumann condensation. Fourier transform infrared spectroscopy, mass spectroscopy and nuclear magnetic resonance spectroscopy were used to characterize the products, and confirming the successful synthesis of sodium 2-laurylamido isobutyrate. The influence of temperature on the surface tension of sodium 2-laurylamido isobutyrate was studied, comparing the chemical properties of the surface with those of sodium N-lauroyl sarcosinate. The results indicate that both surfactants have a similar pC 20, while the critical micelle concentration (CMC) and the surface tension at the critical micelle concentration (γ CMC) of sodium 2-laurylamido isobutyrate are higher than those of sodium N-lauroyl sarcosinate. Further studies on the thermodynamic parameters of sodium 2-laurylamido isobutyrate and sodium N-lauroyl sarcosinate indicate that the formation of micelles is a spontaneous exothermic process mainly driven by entropy. According to the dynamic surface tension of sodium 2-laurylamido isobutyrate and sodium N-lauroyl sarcosinate, the molecular adsorption of the two components mixture change from the initial diffusion controlled adsorption to the later mixed dynamic controlled adsorption.

Skin Cleansing without or with Compromise: Soaps and Syndets

Products designed to cleanse the skin commonly do so through surfactant action, which leads to the lowering of the surface tension of the skin to facilitate the removal of dirt from its surface. Skin cleansers generally come in one of two types: soap-based and synthetic detergents, or syndets. While the latter can effectively maintain the native skin structure, function and integrity, the former tends to negatively affect the skin by causing barrier disruption, lipid dissolution and pH alteration. Despite this, soap is still often preferred, possibly due to the negative connotations around anything that is not perceived as 'natural'. It is, therefore, important that the science behind cleansers, especially those designed for the maintenance of healthy skin and the management of common skin conditions such as eczema, be understood by both formulators and end-users. Here, we carefully weigh the advantages and disadvantages of the different types of surfactant-the key ingredient(s) in skin cleansers-and provide insight into surfactants' physicochemical properties, biological activity and potential effects. Fine-tuning of the complex characteristics of surfactants can successfully lead to an 'optimal' skin cleanser that can simultaneously be milder in nature, highly effective and beneficial, and offer minimal skin interference and environmental impact.

Investigation of the synergistic effect and the morphology of the binary compound systems with potassium N-lauroyl glycinate

Potassium N-lauroyl glycinate (PLG) is an amino acid surfactant widely used in detergents and has excellent chemical properties. In the present work, PLG was mixed in different molar ratios (α1) with the commonly used amphoteric surfactant lauryl amidopropyl betaine (LAB) or the non-ionic surfactant alkyl glycoside (APG). Subsequently, the surface tension, average hydrodynamic radius and number of micellar aggregates of the individual surfactants and the compound systems were measured using the hanging plate method, dynamic light scattering and fluorescence probe method, respectively, and the corresponding surface activity parameters were calculated. The results show that the binary PLG/LAB and PLG/APG systems exhibit non-ideal behaviour and that there was mutual attraction in the systems. The broad distribution of the micelle radius of the PLG/LAB compound system indicates that there are two types of micelles, namely spherical and rod-shaped in the systems. The distribution of the micelle radius of the PLG/APG compound system decreases to the minimum value at α 1 = 0.5. At α 1 = 0.7 and 0.9, double peaks and a broad distribution were also observed. The number of micelle aggregates in the PLG/LAB and PLG/APG compound systems is less than that of the individual surfactants at the respective mole fractions.

Experimental and theoretical study of adsorption of synthesized amino acid core derived surfactants at an air/water interface

The adsorption characteristics of amino acid surfactants, synthesized as substances with different volumes and hydrophilic head properties, have been previously described experimentally, without robust theoretical explanation. A theoretical model enabling the characterization of the adsorption behavior and physicochemical properties of this type of biodegradable surfactants, based on molecular structure, would be beneficial for assessment of their usefulness in colloids and interface science in comparison with typical surface-active substances. In this paper, the adsorption behaviour of synthesized amino acid surfactants at the liquid/gas interface was analyzed experimentally (by surface tension measurements using two independent techniques) and theoretically by means of an elaborate model, considering the volume of the surfactant hydrophilic "head" and its ionization degree. It was shown that the adsorption behavior of the synthesized compounds can be successfully described by the proposed model, including the Helfand-Frisch-Lebowitz isotherm based on the equation of state of 2D hard disk-like particles, with molecular properties of surfactant particles obtained using molecular dynamics simulations (MDS). Model parameters allow for direct comparison of physicochemical properties of synthesized amino acid surfactants with other ionic and non-ionic surface-active substances. Furthermore, it was revealed that intermolecular hydrogen bonds allow the formation of surfactant dimers with high surface activity.

Oil spills: impacts and perspectives of treatment technologies with focus on the use of green surfactants

Oil spills into the oceans cause irreparable damage to marine life and harms the coastal population of the affected areas. The main measures to be taken in response to an oil spill are to reduce the impact on marine life, prevent oil from reaching the shore through its recovery, and accelerate the degradation of unrecovered oil. Any environmental damage can be reduced if the spilled oil is removed from the water quickly and efficiently. Therefore, it is essential to know the treatment strategies for spilled oils. Several technologies are currently available, including booms, skimmers, in situ burning, use of adsorbents, dispersants/surfactants, and bioremediation. The selection of the type of treatment will depend not only on the effectiveness of the technique, but mainly on the type of oil, amount spilled, location, weather, and sea conditions. In this review, the characteristics of oil spills, their origin, destination, and impacts caused, including major accidents around the world, are initially addressed. Then, the main physical, chemical, and biological treatment technologies are presented, describing their advances, advantages, and drawbacks, with a focus on the use of green surfactants. These agents will be described in detail, showing the evolution of research, recent studies, patents, and commercialized products. Finally, the challenges that remain due to spills, the necessary actions, and the prospects for the development of existing treatment technologies are discussed, which must be linked to the use of combined techniques.

Microcystins can be extracted from Microcystis aeruginosa using amino acid-derived biosurfactants

Microcystin, a cyanotoxin produced by Microcystis aeruginosa growing in eutrophic waters, can promote liver tumors in people ingesting contaminated water. To date, water treatment systems have not been effective in removing or degrading these cyanotoxins. In this work, we investigated the inhibitory activity of surfactants on the growth of M. aeruginosa and their application to extract the intracellular produced cyanotoxins. The experiments involving growth inhibition and extraction of cyanotoxins were carried out using the non-biodegradable surfactant cetyl trimethyl ammonium bromide (CTAB) in addition to other biodegradable surfactants. These were Tween 80 and surfactants derived from amino acids and peptides, respectively, from arginine, SDA, and hydrolyzed peptone, SDP. We demonstrated that the tested surfactants could be used to inhibit the growth of M. aeruginosa. At this point, CTAB and SDA proved to be the most competent surfactants in reducing cyanobacterial growth. Moreover, microcystins have been successfully removed from the water employing a cloud point extraction protocol based on the use of these surfactants and ammonium sulfate.

Synergism and properties of binary mixtures based on an arginine dodecyl ester surfactant

The properties of binary mixtures of new cationic amino acid surfactant arginine dihydrochloride dodecyl ester (ADDE) with alkyl poly glycosides (APGs) were studied systematically by evaluating surface tension, conductivity, dynamic...

Ru Nanoparticle Functionalized Silica Nanotubes as a Catalyst for CO2 Hydrogenation Reaction

:

The catalytic display of supported heterogeneous catalysts is essentially reliant on their constitutive elements, including active species and supports. Accordingly, the scheme and development of active catalysts with synergistically enhanced outcomes between active sites and supports are of high importance. A simple NaBH4 reduction method was used to synthesize cylindrical amine-functionalized silica nanotubes supported Ru catalyst (ASNT@Ru catalyst), including amine functionality. The physicochemical properties of the material were analyzed by various analytical methods such as SEM-TEM analysis, N2 physisorption, ICP-OES, XPS, etc., and all the data were found in good agreement with each other. Amine-free SNT support using the calcination process was also synthesized to examine the effect of amine in ASNT support on the uniform Ru dispersion. Taking advantage of the fundamental physical and chemical properties of ASNT support and well-distributed Ru NPs, the ASNT@Ru catalyst was utilized for CO2 hydrogenation reaction, which gave excellent catalytic activity/ stability in terms of a good quantity of the formic. Catalysts recycling was recorded five times, and formic acid was obtained in good quantity.

Recent advances in the enzymatic synthesis of lipophilic antioxidant and antimicrobial compounds

Due to the increase in the consumption of highly processed food in developed countries, as well as, a growing number of foodborne diseases, exploration of new food additives is an issue focusing on scientific attention and industrial interest. Functional compounds with lipophilic properties are remarkably desirable due to the high susceptibility to the deterioration of lipid-rich food products. This paper in a comprehensive manner provides the current knowledge about the enzymatic synthesis of lipophilic components that could act as multifunctional food additives. The main goal of enzymatic lipophilization of compounds intentionally added to food is to make these substances soluble in lipids and/or to obtain environmentally friendly surfactants. Moreover, lipase-catalyzed syntheses could result in changes in the antioxidant and antimicrobial activities of phenolic compounds, carbohydrates, amino acids (oligopeptides), and carboxylic acids. The review describes also the implementation of a new trend in green chemistry, where apart from simple and uncomplicated chemical compounds, the modifications of multi-compound mixtures, such as phenolic extracts or essential oils have been carried out.

Amidation Reaction System: Kinetic Studies and Improvement by Product Removal

The amidation reaction to produce fatty acid diethanolamide is an important unit process to produce surfactants from renewable sources rather than from petroleum sources. Amidation is a liquid-phase reaction between diethanolamine with a fatty acid methyl ester. Since the reaction is reversible, the conversion is limited by equilibrium, the side product being methanol, which is volatile. Hence, mass transfer effects need to be considered in the interpretation of kinetic data. Further, the elimination of methanol can help to shift the reaction forward. Thus, the process has the potential for process intensification. This paper provides a batch reactor model to interpret the simulation data and includes mass transfer effects analyzed using a dimensionless mass transfer parameter (α_lg). Using values of this parameter greater than 4 leads to an equilibrium model where the methanol partial pressure in the bulk gas approaches that at the interface. Using this model, the kinetic and equilibrium parameters for the amidation reaction were determined using experimental data in the first part of this study. The experimental data for fitting the parameters are obtained from a closed batch reactor operated with an initial pressure of 1 bar and a temperature range of 70-80 °C. The second part of the paper examines two process-intensification concepts-viz., inert gas and vacuum stripping of methanol from the reactor-and simulates the process in the form of mass-transfer-based models. Improvement in the final conversion was demonstrated in both approaches, and predictions of the vacuum stripping model are in good agreement with the experimental results. Thus, the developed vacuum stripping model is useful for accurate analysis and design of a reactor with vacuum stripping. The novelty of the work is obtaining rate and reaction equilibrium constants, enthalpy of reaction, and liquid activity coefficient for amidation, which have no prior reporting, and providing the viability of options for side product removal. The applied modeling approaches and the experimental facilities and methods are established.

Ethyl Lauroyl Arginate, an Inherently Multicomponent Surfactant System

Ethyl lauroyl arginate (LAE) is an amino acid-based cationic surfactant with low toxicity and antimicrobial activity. It is widely used as a food preservative and component for food packaging. When stored, LAE decomposes by hydrolysis into surface-active components Nα-lauroyl–l-arginine (LAS) or dodecanoic (lauric) acid. There are only a limited number of reports considering the mechanism of surface activity of LAE. Thus, we analysed the surface tension isotherm of LAE with analytical standard purity in relation to LAE after prolonged storage. We used quantum mechanical density functional theory (DFT) computations to determine the preferred hydrolysis path and discuss the possibility of forming highly surface-active heterodimers, LAE-dodecanoate anion, or LAE-LAS. Applying molecular dynamics simulations, we determined the stability of those dimers linked by electrostatic interactions and hydrogen bonds. We used the adsorption model of surfactant mixtures to successfully describe the experimental surface tension isotherms. The real part surface dilational modulus determined by the oscillation drop method follows a diffusional transport mechanism. However, the nonlinear response of the surface tension could be observed for LAE concentration close to and above Critical Micelle Concentration (CMC). Nonlinearity originates from the presence of micelles and the reorganisation of the interfacial layer.

Impact of Processing Conditions on Rheology, Tribology and Wet Lubrication Performance of a Novel Amino Lipid Hair Conditioner

The objective of this work was to carry out a comprehensive evaluation of the performance of a novel cationic amino lipid surfactant, Brassicyl Valinate Esylate (BVE), in contrast to conventional alkyl quaternary ammonium surfactants (quats), through a study of the effects of process mixing speed on its overall rheological, tribological and wet lubrication performance in comparison to BTAC and CTAC, two cationic surfactants widely used in cosmetics. The major cosmetic application of cationic surfactants is in the preparation of hair conditioners. Hence, this analysis was done firstly by conducting tensile combing tests to evaluate reduction in wet lubrication which translates to conditioning performance. The combing results serve as a testing metric that adequately corresponds to consumer perception of conditioned hair. To correlate this technically, yield stress measurements were conducted to establish rheologic profiles of the conditioner formulations, and in vitro tribological testing of the emulsion systems between two steel surfaces were done to technically simulate the spreading and rubbing of conditioner on the hair. The effect of processing conditions on the formulations was then evaluated. BVE was found to be an effective conditioning surfactant suitable as an eco-friendly replacement for BTAC and CTAC in hair conditioner formulations. The results showed that higher shear mixing rates during formulation lead to poorer performance effects evident through decreased yield stress values, lower percentage reduction in combing force and a higher coefficient of friction.

Sustainable Surfactin Production by Bacillus subtilis Using Crude Glycerol from Different Wastes

Most biosurfactants are obtained using costly culture media and purification processes, which limits their wider industrial use. Sustainability of their production processes can be achieved, in part, by using cheap substrates found among agricultural and food wastes or byproducts. In the present study, crude glycerol, a raw material obtained from several industrial processes, was evaluated as a potential low-cost carbon source to reduce the costs of surfactin production by Bacillus subtilis #309. The culture medium containing soap-derived waste glycerol led to the best surfactin production, reaching about 2.8 g/L. To the best of our knowledge, this is the first report describing surfactin production by B. subtilis using stearin and soap wastes as carbon sources. A complete chemical characterization of surfactin analogs produced from the different waste glycerol samples was performed by liquid chromatography-mass spectrometry (LC-MS) and Fourier transform infrared spectroscopy (FTIR). Furthermore, the surfactin produced in the study exhibited good stability in a wide range of pH, salinity and temperatures, suggesting its potential for several applications in biotechnology.

Contrastive Study of the Foaming Properties of N-Acyl Amino Acid Surfactants with Bovine Serum Albumin and Gelatin

A detailed study on the foamability, foam stability, foam liquid-carrying capacity, and foam morphology of two N-acyl amino acid surfactants with bovine serum albumin (BSA) and gelatin were performed by foam scanning. The results showed that the foamability of the mixed system increased gradually and then tended to be stable with increasing surfactant concentration. The foamability of the high-concentration BSA system was stronger than that of the low-concentration BSA system. The foamability and foam stability of sodium N-lauroyl phenylpropanoic acid (N-C₁₂P)/BSA were better than those of sodium N-lauroyl propylamino acid (N-C₁₂A)/BSA, and the foamability and foam stability of N-C₁₂A/gelatin was better than those of N-C₁₂P/gelatin. The liquid-carrying capacity of the foam initially increased and then decreased with increasing time, and the maximum liquid-carrying capacity increased with increasing surfactant concentration. When the concentration of the surfactant was 8 mM, the drainage rate of N-C₁₂A/protein was higher than that of N-C₁₂P/protein. The morphology of the bubble gradually changed from spherical to polyhedron and the number of bubbles gradually decreased with time increasing. Differences in surfactant structure and protein type had an important effect on the number and area of foam.

Bursting the bubble: A molecular understanding of surfactant-water interfaces

Surfactant science has historically emphasized bulk, thermodynamic measurements to understand the microemulsion properties of greatest industrial significance, such as interfacial tensions, phase behavior, and thermal stability. Recently, interest in the molecular properties of surfactants has grown among the physical chemistry community. This has led to the application of cutting-edge spectroscopic methods and advanced simulations to understand the specific interactions that give rise to the previously studied bulk characteristics. In this Perspective, we catalog key findings that describe the surfactant-oil and surfactant-water interfaces in molecular detail. We emphasize the role of ultrafast spectroscopic methods, including two-dimensional infrared spectroscopy and sum-frequency-generation spectroscopy, in conjunction with molecular dynamics simulations, and the role these techniques have played in advancing our understanding of interfacial properties in surfactant microemulsions.