Survivals of mouse oocytes approach 100% after vitrification in 3-fold diluted media and ultra-rapid warming by an IR laser pulse

Modeling and typical cases analyze at the cell-scale of transmembrane transport and intracellular crystallization and recrystallization during the freeze-thaw process

Mechanical and solute damage caused by ice crystals during the freeze-thaw process of biological samples in cryopreservation are principal determinants of their activity. In this study, a numerical model is constructed by comprehensively considering the phenomenon of crystallization during cooling, recrystallization during rewarming, and the transmembrane transport of water and cryoprotective agent (CPA). The computational findings of the model demonstrate that higher cooling rates result in an increased volume of intracellular crystallization, with a correspondingly elevated intracellular nucleation temperature. By integrating the trend of CPA concentration variation during the cooling process, it is determined that the rates of 0.5 °C·min-1 and 1 °C·min-1 inflict minimal harm to mouse oocytes. During the rewarming process, the rate influences the intracellular ice volume, specifically the higher the rate of rewarming the smaller the increase in intracellular ice volume, and it is recommended that a high-power pulse be added before recrystallization to reduce the effects of recrystallization in practical applications. The pick-and-place operation of the cryopreservation vials can lead to recrystallization, and based on the calculations, it is recommended that the cryopreservation temperature should be lower than -160 °C and the operation time should be controlled within 90 s. The parameter scanning showed that a cooling rate of 0.4-1.8 °C·min-1 and an initial DMSO concentration of 0.1-0.3 M are more favorable for the efficient recovery in the water bath of mouse oocytes. The model constructed in this study can provide valuable numerical guidance for practical cryopreservation protocols of biological specimens.

Mechanisms, Applications, and Challenges of Utilizing Nanomaterials in Cryopreservation

Cryopreservation of biological samples, including cells, tissues, and organs, has become an essential component in various biomedical research and applications, such as cellular therapy, tissue engineering, organ transplantation, and conservation of endangered species. However, it faces critical challenges throughout the cryopreservation process, such as loading/unloading of cryoprotective agent (CPA), ice inhibition during cooling, and ultrafast and uniform heating during rewarming. Applying nanomaterials in cryopreservation has emerged as a promising solution to address these challenges in each step due to their unique properties. For instance, in order to deliver nonpermeating CPA into cells, some nanomaterials, such as polymeric nanocapsule, can carry nonpermeating CPA to penetrate into the cells, regulating the intracellular ice crystal. During cooling, some nanomaterials, such as graphene oxide, can bind to basal or prism planes of ice crystals, suppressing the ice growth. During rewarming, some nanomaterials, such as magnetic nanoparticles, can improve the heating performance, preventing devitrification and recrystallization during rewarming. However, challenges in nanomaterials‐assisted cryopreservation remain, including the need for comprehensive studies on nanomaterials toxicity and the development of scalable manufacturing processes for industrial applications. This review examines the role of nanomaterials in cryopreservation, focusing on their mechanisms, applications, and associated challenges.

Ice formation and its elimination in cryopreservation of oocytes

Damage from ice and potential toxicity of ice-inhibiting cryoprotective agents (CPAs) are key issues in assisted reproduction of humans, domestic and research animals, and endangered species using cryopreserved oocytes and embryos. The nature of ice formed in bovine oocytes (similar in size to oocytes of humans and most other mammals) after rapid cooling and during rapid warming was examined using synchrotron-based time-resolved x-ray diffraction. Using cooling rates, warming rates and CPA concentrations of current practice, oocytes show no ice after cooling but always develop large ice fractions-consistent with crystallization of most free water-during warming, so most ice-related damage must occur during warming. The detailed behavior of ice at warming depended on the nature of ice formed during cooling. Increasing cooling rates allows oocytes soaked as in current practice to remain essentially ice free during both cooling and warming. Much larger convective warming rates are demonstrated and will allow routine ice-free cryopreservation with smaller CPA concentrations. These results clarify the roles of cooling, warming, and CPA concentration in generating ice in oocytes and establish the structure and grain size of ice formed. Ice formation can be eliminated as a factor affecting post-warming oocyte viability and development in many species, improving outcomes and allowing other deleterious effects of the cryopreservation cycle to be independently studied.

Review of Rewarming Methods for Cryopreservation

Cryopreservation is the most effective technology for the long-term preservation of biological materials, including cells, tissues, and even organs in the future. The process of cooling and rewarming is essential to the successful preservation of biological materials. One of the critical problems in the development of cryopreservation is the optimization of effective rewarming technologies. This article reviewed rewarming methods, including traditional boundary rewarming commonly used for small-volume biological materials and other advanced techniques that could be potentially feasible for organ preservation in the future. The review focused on various rewarming technique principles, typical applications, and their possible limitations for cryopreservation of biological materials. This article introduced nanowarming methods in the progressing optimization and the possible difficulties. The trends of novel rewarming methods were discussed, and suggestions were given for future development.

Ice formation and its elimination in cryopreservation of oocytes

Damage from ice and potential toxicity of ice-inhibiting cryoprotective agents (CPAs) are key issues in assisted reproduction of humans, domestic and research animals, and endangered species using cryopreserved oocytes and embryos. The nature of ice formed in bovine oocytes (similar in size to oocytes of humans and most other mammals) after rapid cooling and during rapid warming were examined using synchrotron-based time-resolved x-ray diffraction. Using cooling rates, warming rates and CPA concentrations of current practice, oocytes show no ice after cooling but always develop large ice fractions - consistent with crystallization of most free water - during warming, so most ice-related damage must occur during warming. The detailed behavior of ice at warming depended on the nature of ice formed during cooling. Increasing cooling rates allows oocytes soaked as in current practice to remain essentially ice free during both cooling and warming. Much larger convective warming rates are demonstrated and will allow routine ice-free cryopreservation with smaller CPA concentrations. These results clarify the roles of cooling, warming, and CPA concentration in generating ice in oocytes and establish the structure and grain size of ice formed. Ice formation can be eliminated as a factor affecting post-thaw oocyte viability and development in many species, improving outcomes and allowing other deleterious effects of the cryopreservation cycle to be independently studied.

Ultrastructural examination of cryodamage in Paracentrotus lividus eggs during cryopreservation

This study examinates the challenges of cryopreserving sea urchin (Paracentrotus lividus) eggs, a task hindered by factors like low membrane permeability and high sensitivity to cryoprotective agents (CPAs). While successful cryopreservation has been achieved for some marine invertebrates, eggs remain problematic due to their unique characteristics. The study explores the impact of various CPAs and cryopreservation techniques on sea urchin eggs, employing scanning and transmission electron microscopy to analyze cellular damage. The findings reveal that exposure to low CPA concentrations (0.5 M) did not induce significant damage to eggs. However, high concentrations (3 M) proved highly detrimental. Every cryopreservation approach investigated in this study resulted in irreversible damage to the sea urchin eggs, rendering them nonviable for future use. The research sheds light on the importance of understanding the structural alterations induced by CPAs and cryopreservation methods. This knowledge is essential for refining cryopreservation methods, potentially paving the way for successful preservation of these challenging cells.

Cryopreservation of organoids: Strategies, innovation, and future prospects

Organoid technology has demonstrated unique advantages in multidisciplinary fields such as disease research, tumor drug sensitivity, clinical immunity, drug toxicology, and regenerative medicine. It will become the most promising research tool in translational research. However, the long preparation time of organoids and the lack of high-quality cryopreservation methods limit the further application of organoids. Although the high-quality cryopreservation of small-volume biological samples such as cells and embryos has been successfully achieved, the existing cryopreservation methods for organoids still face many bottlenecks. In recent years, with the development of materials science, cryobiology, and interdisciplinary research, many new materials and methods have been applied to cryopreservation. Several new cryopreservation methods have emerged, such as cryoprotectants (CPAs) of natural origin, ice-controlled biomaterials, and rapid rewarming methods. The introduction of these technologies has expanded the research scope of cryopreservation of organoids, provided new approaches and methods for cryopreservation of organoids, and is expected to break through the current technical bottleneck of cryopreservation of organoids. This paper reviews the progress of cryopreservation of organoids in recent years from three aspects: damage factors of cryopreservation of organoids, new protective agents and loading methods, and new technologies of cryopreservation and rewarming.

Recent advances in reproductive research in Australia and New Zealand: highlights from the Annual Meeting of the Society for Reproductive Biology, 2022

In 2022, the Society for Reproductive Biology came together in Christchurch New Zealand (NZ), for its first face-to-face meeting since the global COVID-19 pandemic. The meeting showcased recent advancements in reproductive research across a diverse range of themes relevant to human health and fertility, exotic species conservation, and agricultural breeding practices. Here, we highlight the key advances presented across the main themes of the meeting, including advances in addressing opportunities and challenges in reproductive health related to First Nations people in Australia and NZ; increasing conservation success of exotic species, including ethical management of invasive species; improvements in our understanding of developmental biology, specifically seminal fluid signalling, ovarian development and effects of environmental impacts such as endocrine-disrupting chemicals; and leveraging scientific breakthroughs in reproductive engineering to drive solutions for fertility, including in assisted reproductive technologies in humans and agricultural industries, and for regenerative medicine.

Optimization of Annealing and Metal Films Radiofrequency Heating Procedures for Vitrified Umbilical Arteries

Vitrification is well known for its application in the cryopreservation of blood vessels, which will address the supply-demand imbalance in vascular grafts for the treatment of cardiovascular disease. Thermal stress damage and devitrification injury in umbilical arteries (UAs) require attention and resolution during the vitrification and rewarming process. In this study, we validated several cooling annealing protocols with temperatures (-130 to -100 °C) and annealing duration durations (10-20 s). Among these, the umbilical artery subjected to annealing at -110 °C for 10 s exhibited the most favorable glass transition and retained 93% of its elastic modulus (0.625 ± 0.030 MPa) compared to the fresh group. Extended annealing temperatures and durations can effectively reduce thermal stress damage, leading to improved mechanical properties by minimizing temperature gradients during cooling. Furthermore, three metal radiofrequency methods were utilized for rewarming, including the use of additional metal films and different magnetic field strengths (20, 25 kA/m). Metal radiofrequency (adding an extra metal film for cryoprotectants rewarming, 20 kA/m) achieved faster and more uniform rewarming, preserving the extracellular matrix (ECM), collagen fibers, and elastic fibers without significant differences compared to the fresh group (P < 0.05). Moreover, its preservation of the biomechanical properties of blood vessels was better than that of water bath heating. Theoretical analysis supports these findings, indicating that radiofrequency heating (RFH) with metal films reduces temperature gradients and thermal stresses during arterial rewarming. RFH contributes to the cryopreservation and clinical application of large-lumen biomaterials, overcoming challenges associated with vascular vitrification and rewarming.

Ice formation and its elimination in cryopreservation of bovine oocytes

Damage from ice and potential toxicity of ice-inhibiting cryoprotective agents (CPAs) are key issues in assisted reproduction using cryopreserved oocytes and embryos. We use synchrotron-based time-resolved x-ray diffraction and tools from protein cryocrystallography to characterize ice formation within bovine oocytes after cooling at rates between ∼1000 °C/min and ∼600,000°C /min and during warming at rates between 20,000 and 150,000 °C /min. Maximum crystalline ice diffraction intensity, maximum ice volume, and maximum ice grain size are always observed during warming. All decrease with increasing CPA concentration, consistent with the decreasing free water fraction. With the cooling rates, warming rates and CPA concentrations of current practice, oocytes may show no ice after cooling but always develop substantial ice fractions on warming, and modestly reducing CPA concentrations causes substantial ice to form during cooling. With much larger cooling and warming rates achieved using cryocrystallography tools, oocytes soaked as in current practice remain essentially ice free during both cooling and warming, and when soaked in half-strength CPA solution oocytes remain ice free after cooling and develop small grain ice during warming. These results clarify the roles of cooling, warming, and CPA concentration in generating ice in oocytes, establish the character of ice formed, and suggest that substantial further improvements in warming rates are feasible. Ice formation can be eliminated as a factor affecting post-thaw oocyte viability and development, allowing other deleterious effects of the cryopreservation cycle to be studied, and osmotic stress and CPA toxicity reduced.

Significance Statement

Cryopreservation of oocytes and embryos is critical in assisted reproduction of humans and domestic animals and in preservation of endangered species. Success rates are limited by damage from crystalline ice, toxicity of cryoprotective agents (CPAs), and damage from osmotic stress. Time-resolved x-ray diffraction of bovine oocytes shows that ice forms much more readily during warming than during cooling, that maximum ice fractions always occur during warming, and that the tools and large CPA concentrations of current protocols can at best only prevent ice formation during cooling. Using tools from cryocrystallography that give dramatically larger cooling and warming rates, ice formation can be completely eliminated and required CPA concentrations substantially reduced, expanding the scope for species-specific optimization of post-thaw reproductive outcomes.

[Droplet freeze-thawing system based on solid surface vitrification and laser rewarming]

Ultra-rapid cooling and rewarming rate is a critical technical approach to achieve ice-free cells during the freezing and melting process. A set of ultra-rapid solid surface freeze-thaw visualization system was developed based on a sapphire flim, and experiments on droplet freeze-thaw were carried out under different cryoprotectant components, volumes and laser energies. The results showed that the cooling rate of 1 μL mixed cryoprotectant [1.5 mol/L propylene glycol (PG) + 1.5 mol/L ethylene glycol (EG) + 0.5 mol/L trehalose (TRE)] could be 9.2×10 3 °C/min. The volume range of 1-8 μL droplets could be vitrified. After comparing the proportions of multiple cryoprotectants, the combination of equal proportion mixed permeability protectant and trehalose had the best vitrification freezing effect and more uniform crystallization characteristics. During the rewarming operation, the heating curve of glassy droplets containing gold nanoparticles was measured for the first time under the action of 400-1 200 W laser power, and the rewarming rate was up to the order of 10 6 °C/min. According to the droplet images of different power rewarming processes, the laser power range for ice-free rewarming with micron-level resolution was clarified to be 1 400-1 600 W. The work of this paper simultaneously realizes the ultra-high-speed temperature ramp-up, transient visual observation and temperature measurement of droplets, providing technical means for judging the ice free droplets during the freeze-thaw process. It is conducive to promoting the development of ultra-rapid freeze-thaw technology for biological cells and tissues.

Self-pressurised rapid freezing at arbitrary cryoprotectant concentrations

Self-pressurised rapid freezing (SPRF) has been proposed as a simple alternative to traditional high-pressure freezing (HPF) protocols for vitrification of biological samples in electron microscopy and cryopreservation applications. Both methods exploit the circumstance that the melting point of ice reaches a minimum when subjected to pressure of around 210 MPa, however, in SPRF its precise quantity depends on sample properties and hence, is generally unknown. In particular, cryoprotective agents (CPAs) are expected to be a factor; though eschewed by many SPRF experiments, vitrification of larger samples notably cannot be envisaged without them. Thus, in this study, we address the question of how CPA concentration affects pressure inside sealed capillaries, and how to design SPRF experiments accordingly. By embedding a fibre-optic probe in samples and performing Raman spectroscopy after freezing, we first present a direct assessment of pressure build-up during SPRF, enabled by the large pressure sensitivity of the Raman shift of hexagonal ice. Choosing dimethyl sulphoxide (DMSO) as a model CPA, this approach allows us to demonstrate that average pressure drops to zero when DMSO concentrations of 15 wt% are exceeded. Since a trade-off between pressure and DMSO concentration represents an impasse with regard to vitrification of larger samples, we introduce a sample architecture with two chambers, separated by a partition that allows for equilibration of pressure but not DMSO concentrations. We show that pressure and concentration in the fibre-facing chamber can be tuned independently, and present differential scanning calorimetry (DSC) data supporting the improved vitrification performance of two-chamber designs. Lay version of abstract for 'Self-pressurised rapid freezing at arbitrary cryoprotectant concentrations' Anyone is familiar with pipes bursting in winter because the volume of ice is greater than that of liquid water. Less well known is the fact that inside a thick-walled container, sealed and devoid of air bubbles, this pressure build-up will allow a fraction of water to remain unfrozen if the sample is also cooled sufficiently rapidly far below the freezing point. This phenomenon has already been harnessed for specimen preparation in microscopy, where low temperatures are useful to immobilise the sample, but harmful if ice formation occurs. However, specimen preparation cannot always rely on this pressure-based effect alone, but sometimes requires addition of chemicals to inhibit ice formation. Not enough is known directly about how these chemicals affect pressure build-up: Indeed, rapid cooling below the freezing point is only possible for small sample volumes, typically placed inside sealed capillaries, so that space is generally insufficient to accommodate a pressure sensor. By means of a compact sensor, based on an optical fibre, laser and spectrometer, we present the first direct assessment of pressure inside sealed capillaries. We show that addition of chemicals reduces pressure build-up and present a two-chambered capillary to circumvent the resulting trade-off. Also, we present evidence showing that the two-chambered capillary design can avoid ice formation more readily than a single-chambered one.

Investigation of Rapid Rewarming Chips for Cryopreservation by Joule Heating

Rapid and uniform rewarming is critical to cryopreservation. Current rapid rewarming methods require complex physical field application devices (such as lasers or radio frequencies) and the addition of nanoparticles as heating media. These complex devices and nanoparticles limit the promotion of the rapid rewarming method and pose potential biosafety concerns. In this work, a joule heating-based rapid electric heating chip (EHC) was designed for cryopreservation. Uniform and rapid rewarming of biological samples in different volumes can be achieved through simple operations. EHC loaded with 0.28 mL of CPA solution can achieve a rewarming rate of 3.2 × 105 °C/min (2.8 mL with 2.3 × 103 °C/min), approximately 2 orders of magnitude greater than the rewarming rates observed with an equal capacity straw when combined with laser nanowarming or magnetic induction heating. In addition, the degree of supercooling can be significantly reduced without manual nucleation during the cooling of the EHC. Subsequently, the results of cryopreservation validation of cells and spheroids showed that the cell viability and spheroid structural integrity were significantly improved after cryopreservation. The viability of human lung adenocarcinoma (A549) cells postcryopreservation was 97.2%, which was significantly higher than 93% in the cryogenic vials (CV) group. Similar results were seen in human mesenchymal stem cells (MSCs), with 93.18% cell survival in the EHC group, significantly higher than 86.83% in the CV group, and cells in the EHC group were also significantly better than those in the CV group for further apoptosis and necrosis assays. This work provides an efficient rewarming protocol for the cryopreservation of biological samples, significantly improving the quantity and quality of cells and spheroids postcryopreservation.

Advanced cryopreservation engineering strategies: the critical step to utilize stem cell products

With the rapid development of stem cell-related therapies and regenerative medicine, the clinical application of stem cell products is on the rise. However, ensuring the effectiveness of these products after storage and transportation remains a challenge in the transformation to clinical trials. Cryopreservation technology allows for the long-term storage of cells while ensuring viability, making it a top priority for stem cell preservation. The field of cryopreservation-related engineering technologies is thriving, and this review provides an overview of the background and basic principles of cryopreservation. It then delves into the main bioengineering technologies and strategies used in cryopreservation, including photothermal and electromagnetic rewarming, microencapsulation, and synergetic ice inhibition. Finally, the current challenges and future prospects in the field of efficient cryopreservation of stem cells are summarized and discussed.

Novel Long-Term Cryo-Storage Using Vitrification and Laser Warming Techniques

Vitrification and laser warming have gained popularity over the traditional convective warming techniques in cryopreservation. Laser warming is rapid with uniform effects, thus preventing ice crystal formation in samples. Contemporary laser warming studies have focused on proof-of-concept experiments. Yet, no protocols or techniques have been developed to address the problem of warming samples from long-term storage. Herein, a new approach to laser warming samples without exposing the samples to ambient temperature is introduced. The new device presented has a mean laser-hitting accuracy of 76% ± 16% and a rewarming rate of 59% ± 25% on samples with <1 μL in volume. Although these rates depend on the choice of vitrification solution and mastery of the technique, the approach described represents a successful first step toward laser warming samples from long-term cryo-storage.

Refined Techniques for Enabling Long-Term Cryo-Repository Using Vitrification and Laser Warming

Vitrification and ultrarapid laser warming are crucial for the cryopreservation of animal embryos, oocytes, and other cells of medicinal, genetic, and agricultural value. In the present study, we focused on alignment and bonding techniques for a special cryojig that combines a jig tool and jig holder into one piece. This novel cryojig was used to obtain a high laser accuracy of 95% and a successful rewarming rate of 62%. The experimental results indicated that our refined device improved laser accuracy in the warming process after long-term cryo-storage through vitrification. We anticipate that our findings will lead to cryobanking applications that use vitrification and laser nanowarming to preserve cells and tissues from a wide range of species.

Droplet Generation, Vitrification, and Warming for Cell Cryopreservation: A Review

Cryopreservation is currently a key step in translational medicine that could provide new ideas for clinical applications in reproductive medicine, regenerative medicine, and cell therapy. With the advantages of a low concentration of cryoprotectant, fast cooling rate, and easy operation, droplet-based printing for vitrification has received wide attention in the field of cryopreservation. This review summarizes the droplet generation, vitrification, and warming method. Droplet generation techniques such as inkjet printing, microvalve printing, and acoustic printing have been applied in the field of cryopreservation. Droplet vitrification includes direct contact with liquid nitrogen vitrification and droplet solid surface vitrification. The limitations of droplet vitrification (liquid nitrogen contamination, droplet evaporation, gas film inhibition of heat transfer, frosting) and solutions are discussed. Furthermore, a comparison of the external physical field warming method with the conventional water bath method revealed that better applications can be achieved in automated rapid warming of microdroplets. The combination of droplet vitrification technology and external physical field warming technology is expected to enable high-throughput and automated cryopreservation, which has a promising future in biomedicine and regenerative medicine.

Nanowarming and ice-free cryopreservation of large sized, intact porcine articular cartilage

Successful organ or tissue long-term preservation would revolutionize biomedicine. Cartilage cryopreservation enables prolonged shelf life of articular cartilage, posing the prospect to broaden the implementation of promising osteochondral allograft (OCA) transplantation for cartilage repair. However, cryopreserved large sized cartilage cannot be successfully warmed with the conventional convection warming approach due to its limited warming rate, blocking its clinical potential. Here, we develope a nanowarming and ice-free cryopreservation method for large sized, intact articular cartilage preservation. Our method achieves a heating rate of 76.8 °C min-1, over one order of magnitude higher than convection warming (4.8 °C min-1). Using systematic cell and tissue level tests, we demonstrate the superior performance of our method in preserving large cartilage. A depth-dependent preservation manner is also observed and recapitulated through magnetic resonance imaging and computational modeling. Finally, we show that the delivery of nanoparticles to the OCA bone side could be a feasible direction for further optimization of our method. This study pioneers the application of nanowarming and ice-free cryopreservation for large articular cartilage and provides valuable insights for future technique development, paving the way for clinical applications of cryopreserved cartilage.

Cryopreservation Methods and Frontiers in the Art of Freezing Life in Animal Models

The development in cryobiology in animal breeding had revolutionized the field of reproductive medicine. The main objective to preserve animal germplasm stems from variety of reasons such as conservation of endangered animal species, animal diversity, and an increased demand of animal models and/or genetically modified animals for research involving animal and human diseases. Cryopreservation has emerged as promising technique for fertility preservation and assisted reproduction techniques (ART) for production of animal breeds and genetically engineered animal species for research. Slow rate freezing and rapid freezing/vitrification are the two main methods of cryopreservation. Slow freezing is characterized by the phase transition (liquid turning into solid) when reducing the temperature below freezing point. Vitrification, on the other hand, is a phenomenon in which liquid solidifies without the formation of ice crystals, thus the process is referred to as a glass transition or ice-free cryopreservation. The vitrification protocol applies high concentrations of cryoprotective agents (CPA) used to avoid cryoinjury. This chapter provides a brief overview of fundamentals of cryopreservation and established methods adopted in cryopreservation. Strategies involved in cryopreserving germ cells (sperm and egg freezing) are included in this chapter. Last section describes the frontiers and advancement of cryopreservation in some of the important animal models like rodents (mouse and rats) and in few large animals (sheep, cow etc).

Plasmonic CuxS Nanocages for Enhanced Solar Photothermal Cell Warming

Highly efficient plasmonic photothermal nanomaterials are benefitial to the successful resuscitation of cells. Copper sulfide (Cu_xS) is a type of plasmonic solar photothermal semiconductor material that expands the light collecting range by altering its localized surface plasmonic resonance (LSPR) to the near- to mid-infrared (IR) spectral region. Particularly, nanocages (or nanoshells) have hybridized plasmon resonances as the result of superpositioned nanospheres and nanocavities, which extend their receiving range for the solar spectrum and increase light-to-heat conversion rate. In this work, for the first time, we applied colloidal hollow Cu_xS nanocages to revive cryopreserved HeLa cells via photothermal warming, which showed improved cell warming rate and cell viability after cell resuscitation. Moreover, we tested the photothermal performance of Cu_xS nanocages with concentrated light illumination, which exhibited extraordinary photothermal performance due to localized and enhanced illumination. We further quantified each band's contribution during the cell warming process via evaluating the warming rate of cryopreserved cell solution with illumination by monochromatic UV, visible, and NIR lasers. We studied the biosafety and toxicity of Cu_xS nanocages by analyzing the generated copper ion residue during cell warming and cell incubation, respectively. Our study shows that Cu_xS nanocages have huge potential for cell warming and are promising for vast range of applications, such as nanomedicine, life science, biology, energy saving, etc.

Adherent cell thawing by infrared radiation

Cryopreservation of adherent cells is crucial for commercial cell therapy technology, including effective distribution and storage. Fast thawing has been shown to increase cell recovery in vitrified samples. Previously, radiofrequency (RF) has been investigated as a heating source on large samples, either with or without magnetic particles. Also, laser heating with the aid of dye or nanoparticles has been utilized on sub-millimeter samples successfully. For slow freezing cryopreservation methods, the influence of rate of thawing on viability is less clear. Cryopreservation of surface adhered cells result in many cases in detachment from the surface. We illustrate how intense infrared radiation from a focused halogen illuminator accelerates thawing. We show that two epithelial cell lines, retinal pigment epithelium cells and heterogeneous human epithelial colorectal adenocarcinoma cells, can be effectively cryopreserved and recovered using a combination of slow freezing and fast thawing under infrared illumination. We were able to successfully thaw samples, of 2-4 mm thick, including the media, on the order of a second, providing a heating rate of thousands of Kelvin per minute. Under optimal conditions, we observed higher post-thawing cell viability rates and higher cell adhesion with infrared thawing than with water bath thawing. We suggest that bulk warming with infrared radiation has an advantage over surface warming of surface-attached cells, as it alleviates cell stress during the process of thawing. These findings will pave the way for novel approaches to treating substrate-adhered cells and 3D scaffolds with cells and organoids. This technology may serve as a crucial component in lab-on-chip systems for medical testing and therapeutic use.

Advanced technologies for the preservation of mammalian biospecimens

The three classical core technologies for the preservation of live mammalian biospecimens-slow freezing, vitrification and hypothermic storage-limit the biomedical applications of biospecimens. In this Review, we summarize the principles and procedures of these three technologies, highlight how their limitations are being addressed via the combination of microfabrication and nanofabrication, materials science and thermal-fluid engineering and discuss the remaining challenges.

Controlled Release of Cryoprotectants by Near-Infrared Irradiation for Improved Cell Cryopreservation

Cryopreservation is essential to store living cells and tissues for future use while maintaining the proper levels of cell functions. The use of cryoprotective agents (CPAs) to inhibit intracellular ice formation during cryopreservation is vital for cell survival, but the addition and removal of CPAs and ice recrystallization during rewarming will cause fatal injury to cells. The conventional CPA loading and unloading methods generate osmotic shocks and cause mechanical injury to biological samples, and the conventional method of rewarming using a water bath also leads to ice recrystallization and devitrification. A new CPA-loaded microparticle-based method for loading and photothermal rewarming under near-infrared (NIR) laser irradiation was proposed to overcome these difficulties. We have successfully achieved the controlled release of CPAs (2 M EG, 2 M PG, and 0.5 M trehalose) with a graphene oxide (GO, 0.04% w/v) core from a 1.5% (w/v) sodium alginate shell to the human umbilical vein endothelial cells (HUVECs) within 60 s using NIR laser irradiation (808 nm Lasever at 5000 mW/cm²) and successfully recovered the CPA-loaded cells with 0.04% (w/v) GO in 8-10 s using the same NIR irradiation. The results show that this method achieved 25% higher viability of HUVECs compared to the conventional method. In short, this study proposes a new approach for achieving controlled CPA loading to cells with a photothermal-induced strategy for cell cryopreservation.

Cryopreservation method for Drosophila melanogaster embryos

The development of a widely adopted cryopreservation method remains a major challenge in Drosophila research. Here we report a robust and easily implemented cryopreservation protocol of Drosophila melanogaster embryos. We present innovations for embryo permeabilization, cryoprotectant agent loading, and rewarming. We show that the protocol is broadly applicable, successfully implemented in 25 distinct strains from different sources. We demonstrate that for most strains, >50% embryos hatch and >25% of the resulting larvae develop into adults after cryopreservation. We determine that survival can be significantly improved by outcrossing to mitigate the effect of genetic background for strains with low survival after cryopreservation. We show that flies retain normal sex ratio, fertility, and original mutation after successive cryopreservation of 5 generations and 6-month storage in liquid nitrogen. Lastly, we find that non-specialists are able to use this protocol to obtain consistent results, demonstrating potential for wide adoption.

Fe3O4 magnetic nanoparticles improve the vitrification of mouse immature oocytes and modulate the pluripotent genes expression in derived pronuclear-stage embryos

The vitrification of Germinal Vesicle (immature) oocytes is beneficial for preservation of fertility in cases involving reproductive problems. The use of nanoparticles (NP(s)) as vitrification aid is a novel approach towards improving vitrification efficiency. The efficacy of use of iron oxide (Fe₃O₄) nanoparticles as vitrification aid is reported in this paper. Immature oocytes from NMRI mice were collected and divided into non-vitrified (nVit), Vitrified (Vit) and Vitrified + NP (Vit^+NP) groups. In the Vit^+NP group, solutions containing Fe₃O₄ nanoparticles at three different concentrations (0.004%, 0.008% and 0.016% w/v) were separately added to the vitrification solution and their effects on the vitrification of the oocytes were compared. The concentration that was found to be best performing (0.004% w/v) was used in vitrification studies in subsequent experiments. Mitochondrial function, apoptosis incidence, ultrastructure alteration, nuclear maturity, embryo formation and genes expression (Nanog, Oct4, Cdx2, and Sox2) were evaluated in response to the addition of the nanoparticle solution during vitrification. Nuclear maturity of oocyte and embryo formation increased significantly (P ≤ 0.05) in the vitrified + NP group. Expression of Sox2 also increased significantly in both vitrified and vitrified + NP groups. While there was a significant increase in Oct4 expression in the vitrified group as compared to control, there was no significant difference between vitrified and Vit^+NP groups. The expression of Cdx2 decreased significantly (P ≤ 0.05) in the Vit^+NP group. From these observations, Fe₃O₄ nanoparticles could protect immature oocytes from cryodamages, positively affect vitrification and modulate the pluripotency of derived pronuclear-stage embryos.

Synergistic Ice Inhibition Effect Enhances Rapid Freezing Cryopreservation with Low Concentration of Cryoprotectants

Despite recent advances in controlling ice formation and growth, it remains a challenge to design anti-icing materials in various fields from atmospheric to biological cryopreservation. Herein, tungsten diselenide (WSe2)-polyvinyl pyrrolidone (PVP) nanoparticles (NPs) are synthesized through one-step solvothermal route. The WSe2-PVP NPs show synergetic ice regulation ability both in the freezing and thawing processes. Molecularly speaking, PVP containing amides group can form hydrogen bonds with water molecules. At a macro level, the WSe2-PVP NPs show adsorption-inhibition and photothermal conversation effects to synergistically restrict ice growth. Meanwhile, WSe2-PVP NPs are for the first time used for the cryopreservation of human umbilical vein endothelial cell (HUVEC)-laden constructs based on rapid freezing with low concentrations of cryoprotectants (CPAs), the experimental results indicate that a minimal concentration (0.5 mg mL-1) of WSe2-PVP NPs can increase the viabilities of HUVECs in the constructs post cryopreservation (from 55.8% to 83.4%) and the cryopreserved constructs can also keep good condition in vivo within 7 days. Therefore, this work provides a novel strategy to synergistically suppress the formation and growth of the ice crystalsfor the cryopreservation of cells, tissues, or organs.

Ice Inhibition for Cryopreservation: Materials, Strategies, and Challenges

Cryopreservation technology has developed into a fundamental and important supporting method for biomedical applications such as cell-based therapeutics, tissue engineering, assisted reproduction, and vaccine storage. The formation, growth, and recrystallization of ice crystals are the major limitations in cell/tissue/organ cryopreservation, and cause fatal cryoinjury to cryopreserved biological samples. Flourishing anti-icing materials and strategies can effectively regulate and suppress ice crystals, thus reducing ice damage and promoting cryopreservation efficiency. This review first describes the basic ice cryodamage mechanisms in the cryopreservation process. The recent development of chemical ice-inhibition molecules, including cryoprotectant, antifreeze protein, synthetic polymer, nanomaterial, and hydrogel, and their applications in cryopreservation are summarized. The advanced engineering strategies, including trehalose delivery, cell encapsulation, and bioinspired structure design for ice inhibition, are further discussed. Furthermore, external physical field technologies used for inhibiting ice crystals in both the cooling and thawing processes are systematically reviewed. Finally, the current challenges and future perspectives in the field of ice inhibition for high-efficiency cryopreservation are proposed.

Towards a method for cryopreservation of mosquito vectors of human pathogens

Mosquito-borne diseases are responsible for millions of human deaths every year, posing a massive burden on global public health. Mosquitoes transmit a variety of bacteria, parasites and viruses. Mosquito control efforts such as insecticide spraying can reduce mosquito populations, but they must be sustained in order to have long term impacts, can result in the evolution of insecticide resistance, are costly, and can have adverse human and environmental effects. Technological advances have allowed genetic manipulation of mosquitoes, including generation of those that are still susceptible to insecticides, which has greatly increased the number of mosquito strains and lines available to the scientific research community. This generates an associated challenge, because rearing and maintaining unique mosquito lines requires time, money and facilities, and long-term maintenance can lead to adaptation to specific laboratory conditions, resulting in mosquito lines that are distinct from their wild-type counterparts. Additionally, continuous rearing of transgenic lines can lead to loss of genetic markers, genes and/or phenotypes. Cryopreservation of valuable mosquito lines could help circumvent these limitations and allow researchers to reduce the cost of rearing multiple lines simultaneously, maintain low passage number transgenic mosquitoes, and bank lines not currently being used. Additionally, mosquito cryopreservation could allow researchers to access the same mosquito lines, limiting the impact of unique laboratory or field conditions. Successful cryopreservation of mosquitoes would expand the field of mosquito research and could ultimately lead to advances that would reduce the burden of mosquito-borne diseases, possibly through rear-and-release strategies to overcome mosquito insecticide resistance. Cryopreservation techniques have been developed for some insect groups, including but not limited to fruit flies, silkworms and other moth species, and honeybees. Recent advances within the cryopreservation field, along with success with other insects suggest that cryopreservation of mosquitoes may be a feasible method for preserving valuable scientific and public health resources. In this review, we will provide an overview of basic mosquito biology, the current state of and advances within insect cryopreservation, and a proposed approach toward cryopreservation of Anopheles stephensi mosquitoes.

Principles Underlying Cryopreservation and Freeze-Drying of Cells and Tissues

Cryopreservation and freeze-drying can be used to preserve cells or tissues for prolonged periods. Vitrification, or ice-free cryopreservation, is an alternative to cryopreservation that enables cooling cells to cryogenic temperatures in the absence of ice. The processing pathways involved in (ice-free) cryopreservation and freeze-drying of cells and tissues, however, can be very damaging. In this chapter, we describe the principles underlying preservation of cells for which freezing and drying are normally lethal processes as well as for cells that are able to survive in a reversible state of suspended animation. Freezing results in solution effects injury and/or intracellular ice formation, whereas drying results in removal of (non-freezable) water normally bound to biomolecules, which is generally more damaging. Cryopreservation and freeze-drying require different types of protective agents. Different mechanistic modes of action of cryoprotective and lyoprotective agents are described including minimizing ice formation, preferential exclusion, water replacement, and vitrification. Furthermore, it is discussed how protective agents can be introduced into cells avoiding damage due to too large cell volume excursions, and how knowledge of cell-specific membrane permeability properties in various temperature regimes can be used to rationally design (ice-free) cryopreservation and freeze-drying protocols.

Cryopreservation and Laser Nanowarming of Zebrafish Embryos Followed by Hatching and Spawning

This study shows for the first time the ability to rewarm cryopreserved zebrafish embryos that grow into adult fish capable of breeding normally. The protocol employs a single injection of cryoprotective agents (CPAs) and gold nanorods (GNRs) into the yolk and immersion in a precooling bath to dehydrate the perivitelline space. Then embryos are encapsulated within CPA and GNR droplets, plunged into liquid nitrogen, cryogenically stabilized, and rewarmed by a laser pulse. Postlaser nanowarming, embryos (n = 282) exhibit intact structure by 1 h (40%), continued development after 3 h (22%), movement after 24 h (11%), hatching after 48 h (9%), and swimming after Day 5 (3%). Finally, from fish that survives till Day 5, two larvae are grown to adulthood and spawned, yielding survival comparable to an unfrozen control. Future efforts will focus on improving the survival to adulthood and developing methods to cryopreserve large numbers of embryos for research, aquaculture, and biodiversity preservation.

Diffusion Limited Cryopreservation of Tissue with Radiofrequency Heated Metal Forms

Cryopreserved tissues are increasingly needed in biomedical applications. However, successful cryopreservation is generally only reported for thin tissues (≤1 mm). This work presents several innovations to reduce cryoprotectant (CPA) toxicity and improve tissue cryopreservation, including 1) improved tissue warming rates through radiofrequency metal form and field optimization and 2) an experimentally verified predictive model to optimize CPA loading and rewarming to reduce toxicity. CPA loading is studied by microcomputed tomography (µCT) imaging, rewarming by thermal measurements, and modeling, and viability is measured after loading and/or cryopreservation by alamarBlue and histology. Loading conditions for three common CPA cocktails (6, 8.4, and 9.3 m) are designed, and then fast cooling and metal forms rewarming (up to 2000 °C min-1 ) achieve ≥90% viability in cryopreserved 1-2 mm arteries with various CPAs. Despite high viability by alamarBlue, histology shows subtle changes after cryopreservation suggesting some degree of cell damage especially in the central portions of thicker arteries up to 2 mm. While further studies are needed, these results show careful CPA loading and higher metal forms warming rates can help reduce CPA loading toxicity and improve outcomes from cryopreservation in tissues while also offering new protocols to preserve larger tissues ≥1 mm in thickness.

Improved and reproducible cell viability in the superflash freezing method using an automatic thawing apparatus

Cell cryopreservation stops the biological activity of cells by placing them in the frozen state, and can be used to preserve cells without subculturing, which can cause contamination and genetic drift. However, the freezing process used in cryopreservation can injure or damage the cells due to the cytotoxicity of cryoprotecting agents (CPAs). We have previously reported a CPA-free cryopreservation method based on inkjet technology. In this method, the vitrified cells were exposed to the room temperature atmosphere during the transport of the cells using tweezers, which caused devitrification due to the increased temperature and often lowered the cell viability. In the present study, we developed an automatic thawing apparatus that transports the vitrified cells rapidly into a prewarmed medium using a spring hinge. Observations with a high-speed camera revealed that the spring hinge drops the cells into the prewarmed medium within 20 ms. All heat-transfer simulations for the apparatuses with different designs and rotation speeds showed that the cells remained below the glass-transition temperature during the transport. Finally, the apparatus was evaluated using mouse fibroblast 3T3 cells. The cell viability was improved and its reproducibility was enhanced using this apparatus. The results indicate that the combination of superflash freezing with the rapid thawing process represents a promising approach to circumvent the problems typically associated with the addition of CPAs.

Photothermal conversion of gold nanoparticles for uniform pulsed laser warming of vitrified biomaterials

Pulsed laser (ms, 1064 nm) gold nanoparticle (GNP) heating has been used recently to achieve fast (>10 000 000 °C min^-1) warming of vitrified droplets using gold nanorods (GNRs) as photon-absorbers. To maximize the viability of biomaterials in vitrified droplets, the droplets must be warmed as uniformly as possible. A potential approach to such warming is to use an appropriate combination of photon-absorption and -scattering to distribute heat more uniformly throughout a droplet. To investigate this, 2 plasmonic gold nanorods (GNRs), 1 hollow gold nanoshell, and 2 silica-core gold nanoshells (GNSs) were synthesized and characterized under 1064 nm laser irradiation in water, propylene glycol, and protein-rich (egg white) solutions. Using a modified cuvette laser calorimetry experiment with complementary Monte Carlo modeling, the GNSs were found to have higher per-particle absorption and scattering cross sections, while the GNRs had higher photothermal conversion efficiency, absorption efficiency, and Au mass normalized absorption cross sections. In the characterization, the GNSs with larger scattering-to-absorption ratios could have ∼30% over-estimation of photothermal conversion efficiency if scattering and reabsorption inside the solution were not considered, while GNRs with lower ratios were less impacted. Combined Monte Carlo and COMSOL simulations were used to predict the specific absorption rate (W m^-3) and heating behavior of GNP-loaded hemispherical droplets, thereby demonstrating that the GNS case with higher scattering-to-absorption ratio achieved more uniform heating than the GNR case. Interestingly, further tuning of the scattering and absorption coefficients of the hemispherical GNP-loaded droplet within the model suggests the ability to obtain an optimal scattering-to-absorption ratio for uniform heating. These results show the importance of considering the reabsorption of scattered light to accurately characterize the photothermal conversion efficiency of GNP solutions during laser irradiation. We also show that the relative scattering and absorption properties of the nanoparticles can be designed to promote both rapid and uniform laser rewarming of vitrified droplets for application in cryopreservation.

The Effect of Different Vitrification and Staining Protocols on the Visibility of the Nuclear Maturation Stage of Equine Oocytes

In this study, we compared two staining protocols assessing the nuclear chromatin stage of equine oocytes after vitrification using permeable and nonpermeable cryoprotectants. Slaughterhouse-derived oocytes (n = 155) were obtained from a total of 32 mares and in vitro matured in M199 medium for 42 hours at 38.5°C in 5% CO_2. In the first experiment, two concentrations of Hoechst 33342 (HO) were tested (10 μg/mL; P1 and 2.5 μg/mL; P2) combined with 50 μg/mL of propidium iodide as staining protocols to evaluate the visibility of matured oocytes (n = 44). In the second experiment, 111 oocytes were evaluated using the staining protocol P2, before (C, control) and after vitrification following a two-step conventional protocol with (15% dimethyl sulfoxide, 15% ethylene glycol, and 0.5 M sucrose; V1) or without (1 M sucrose; V2) using permeable cryoprotectants. Our results showed that P2 provided a higher percentage of oocytes with outstanding visibility of the nuclear chromatin stage (52.17%; P < .05) in comparison with P1 (19.04%). In the second experiment, no cryoprotectant-free vitrified oocytes reached the metaphase II maturation stage. This result was significantly lower (P < .05) than conventional vitrification (15.38%) and both lower in comparison with the nonvitrified control group (42.11%). In conclusion, permeable cryoprotectant-free vitrification of equine oocytes obtained poor results and therefore cannot be considered an alternative to vitrification using permeable cryoprotectants. In addition, a staining protocol with a low concentration of HO is recommended to evaluate the nuclear chromatin stage of equine oocytes after in vitro maturation.

Soft liquid metal nanoparticles achieve reduced crystal nucleation and ultrarapid rewarming for human bone marrow stromal cell and blood vessel cryopreservation

High warming rates during cryopreservation are crucial and essential for successful vitrification. However, realizing a faster warming rate in low-concentration cryoprotective agents appears to be challenging for conventional warming process through convective heat transfer. Herein, we developed a liquid metal (LM) nanosystem that can act as a spatial source to significantly enhance the warming rates with near-infrared laser irradiation during the warming process. The synthetic Pluronic F127-liquid metal nanoparticles (PLM NPs) displayed multiple performances with uniform particle size, superior photothermal conversion efficiency (52%), repeatable photothermal stability, and low cytotoxicity. Particularly, it is more difficult for the liquid PLM NPs with less surface free energy to form crystal nucleation than other solid NPs such as gold and Fe₃O₄, which is beneficial for the cooling process during cryopreservation. The viability of human bone marrow-derived mesenchymal stem cells postcryopreservation reached 78±3%, which is threefold higher than that obtained by the conventional warming method (25±6%). Additionally, the cells postcryopreservation maintained their normal attachment, proliferation, surface marker expression, and intact multilineage differentiation properties. Moreover, the results of mouse tails including blood vessel cryopreservation showed a relatively improved intact structure when using PLM NP rewarming compared with the results of conventional warming. The new LM nanosystem provides a universal platform for cryopreservation that is expected to have potential for widespread applications including bioengineering, cell-based medicine, and clinical translation. STATEMENT OF SIGNIFICANCE: In this study, we fabricated soft liquid metal nanoparticles with high photothermal conversion efficiency, repeatable photothermal stability, and low cytotoxicity. Particularly, soft liquid metal nanoparticles with less surface free energy and suppression effects of ice formation were first introduced to mediate cryopreservation. Superior ice-crystallization inhibition is achieved as a result of less crystal nucleation and ultrarapid rewarming during the freezing and warming processes of cryopreservation, respectively. Collectively, cryopreservation of human bone marrow stromal cells (HBMSCs) and mouse tails including blood vessels can be successfully performed using this new nanoplatform, showing great potential in the application of soft nanoparticles in cryopreservation.

Angiogenesis and follicular development in ovarian tissue of cattle following vitrification and post-warming culture on chicken chorioallantoic membrane

The purpose of this study was to assess the viability and growth of follicles in ovarian tissues of cattle vitrified using two non-permeating cryoprotectants (sucrose and trehalose) and two cryodevices (cryovial and cryotop). Cortical slices (1-2 mm³) from cattle ovaries (n = 5) were assigned to one of the 14 treatment groups. Cortical slices were vitrified in a TCM199 medium supplemented with ethylene glycol, DMSO, calf serum and either 0.5 M sucrose or trehalose, in cryovials or on cryotops. After warming, cortical slices were either fixed immediately for histology or grafted on a chorioallantoic membrane (CAM) of 10-day old chick embryos. Angiogenesis in ovarian tissues was determined. Viable and atretic preantral (primordial, primary and secondary) follicle densities were examined histologically. There was angiogenesis (chicken) in cortical slices grafted on the CAM by day 5 of culture, however, there was no difference for blood vessel densities when there was use of non-permeating cryoprotectants or cryodevices. Total, viable and atretic follicle densities did not differ (P > 0.05) with use of non-permeating cryoprotectants or cryodevices. The proportion of viable follicles was greater (P < 0.001) in fresh-control than CAM culture-control or vitrification groups. The inclusion of sucrose in the vitrification solution resulted in a larger number of atretic follicles than in the fresh-control group (P < 0.05). In summary, sucrose and trehalose, and cryotop and cryovial were equally suitable for vitrification of ovarian tissues of cattle. Vitrification of ovarian tissues of cattle with subsequent use of CAM culture adversely affected follicular development.

Human oocytes and zygotes are ready for ultra-fast vitrification after 2 minutes of exposure to standard CPA solutions

Vitrification of human oocytes and embryos in different stages of development is a key element of daily clinical practice of in vitro fertilization treatments. Despite the cooling and warming of the cells is ultra-fast, the procedure as a whole is time consuming. Most of the duration is employed in a long (8–15 minutes), gradual or direct exposure to a non-vitrifying cryoprotectant solution, which is followed by a short exposure to a more concentrated vitrifying solution. A reduction in the duration of the protocols is desirable to improve the workflow in the IVF setting and reduce the time of exposure to suboptimal temperature and osmolarity, as well as potentially toxic cryoprotectants. In this work it is shown that this reduction is feasible. In silico (MatLab program using two-parameter permeability model) and in vitro observations of the oocytes’ osmotic behaviour indicate that the dehydration upon exposure to standard cryoprotectant solutions occurs very fast: the point of minimum volume of the shrink-swell curve is reached within 60 seconds. At that point, intracellular water ejection is complete, which coupled with the permeation of low molecular weight cryoprotectants results in similar intracellular and extracellular solute concentrations. This shows that prolonging the exposure to the cryoprotectant solutions does not improve the cytosolic glass forming tendency and could be avoided. To test this finding, human oocytes and zygotes that were donated for research were subjected to a shortened, dehydration-based protocol, consisting of two consecutive exposures of one-minute to two standard cryoprotectant solutions, containing ethylene glycol, dimethyl sulfoxide and sucrose. At the end of this two-minute dehydration protocol, the critical intracellular solute concentration necessary for successful vitrification was attained, confirmed by the post-warming survival and ability to resume cytokinesis of the cells. Further studies of the developmental competency of oocytes and embryos would be necessary to determine the suitability of this specific dehydration protocol for clinical practice, but based on our results, short times of exposure to increasingly hypertonic solutions could be a more time-efficient strategy to prepare human oocytes and embryos for vitrification.

Optimization of vitrification factors for embryo cryopreservation of kelp grouper (Epinephelus moara)

Cryopreservation of marine fish embryos causes to severe cryogenic damage, and to date, adults have not been reared from embryos that were cryopreserved. Here, we optimized vitrification factors to improve the survival and hatching rate of kelp grouper (Epinephelus moara) embryos after cryopreservation. We screened the effects of 11 vitrification solution concentrations (25-50%) on the survival rate of embryos at four developmental stages (16S, 18S, 22S, TB). We investigated the effects of different equilibration time (25-45min) on the survival rate and the influence of vitrification solutions on embryonic volume. In addition, we tested the effects of treating embryos at five different developmental stages (4-6S, 16S, 22S, TB, HB) with different vitrification solutions (35% PMG3S and 35% PMG3T), prechilling temperature (-5 °C and 4 °C) and prechilling time. In total, 9855 embryos were cryopreserved at 10 developmental stages, from optic capsule stage to pre-hatch stage. We found that kelp grouper embryos performed best at equilibration time of 30 min. Embryos at the tail-bud stage exhibited greater tolerance to vitrification than other stages. Vitrification solutions that contained sucrose showed better survival rates compared to embryos treated with vitrification solutions containing trehalose. Pre-chilling treatment improved viability before freezing, but did not improve viability after freezing. In the most optimal condition we identified in this study, the average survival, normal development and malformation rates of cryopreserved embryos were 6.32%, 2.36% and 3.49%, and 39.85% of the surviving embryos that were cryopreserved hatched. The hatched larvae gradually died at day 12 of cultivation, where the longest surviving individuals lived for 16 days. This study provides valuable data for improving survival and hatching rate of cryopreserved grouper embryos, and provides references for further exploring techniques in fish embryo cryopreservation.

From Nanowarming to Thermoregulation: New Multiscale Applications of Bioheat Transfer

This review explores bioheat transfer applications at multiple scales from nanoparticle (NP) heating to whole-body thermoregulation. For instance, iron oxide nanoparticles are being used for nanowarming, which uniformly and quickly rewarms 50-80-mL (≤5-cm-diameter) vitrified systems by coupling with radio-frequency (RF) fields where standard convective warming fails. A modification of this approach can also be used to successfully rewarm cryopreserved fish embryos (∼0.8 mm diameter) by heating previously injected gold nanoparticles with millisecond pulsed laser irradiation where standard convective warming fails. Finally, laser-induced heating of gold nanoparticles can improve the sensitivity of lateral flow assays (LFAs) so that they are competitive with laboratory tests such as the enzyme-linked immunosorbent assay. This approach addresses the main weakness of LFAs, which are otherwise the cheapest, easiest, and fastest to use point-of-care diagnostic tests in the world. Body core temperature manipulation has now become possible through selective thermal stimulation (STS) approaches. For instance, simple and safe heating of selected areas of the skin surface can open arteriovenous anastomosis flow in glabrous skin when it is not already established, thereby creating a convenient and effective pathway to induce heat flow between the body core and environment. This has led to new applications of STS to increase or decrease core temperatures in humans and animals to assist in surgery (perioperative warming), to aid ischemic stress recovery (cooling), and even to enhance the quality of sleep. Together, these multiscale applications of nanoparticle heating and thermoregulation point to dramatic opportunities for translation and impact in these prophylactic, preservative, diagnostic, and therapeutic applications of bioheat transfer.

Characterization of Laser Gold Nanowarming: A Platform for Millimeter-Scale Cryopreservation

Preventing ice formation during cryopreservation by vitrification has led to the successful storage and banking of numerous cellular- and tissue-based biomaterials. In their breakthrough work, Peter Mazur's group achieved over 90% survival by using a laser warming technique for 100 μm mice oocytes that were cooled in 0.1 μL droplets with 2.3 M CPA and extracellularly loaded India ink (laser absorber). Laser warming can provide rapid and uniform warming rates to "outrun" damaging ice crystal growth. Here we generalize Mazur's technique for microliter-sized droplets using laser nanowarming to rewarm millimeter-scale biomaterials when loaded extracellularly and/or intracellularly with biocompatible 1064 nm resonant gold nanoparticles. First, we show that droplets containing low-concentration cryoprotectants (such as 2 M propylene glycol ± 1 M trehalose) can be rapidly cooled at rates up to 90 000 °C/min by plunging into liquid nitrogen to achieve either a visually transparent state (i.e., vitrified) or a cloudy with ice (i.e., nonvitrified) state. Both modeling and experiments were then used to characterize the laser nanowarming process for different laser energy (2-6 J), pulse length (1-20 ms), droplet volume (0.2-1.8 μL), cryoprotectant (2-3 M), and gold concentration (0.77 × 10¹⁷-4.8 × 10¹⁷ nps/m³) values to assess physical and biological success. Physical success was achieved by finding conditions that minimize cloudiness and white spots within the droplets during cooling and warming as signs of damaging ice formation and ice crystallization, respectively. Biological success was achieved using human dermal fibroblasts to find conditions that achieve ≥90% cell viability normalized to controls postwarming. Thus, physical and biological success can be achieved using this platform cryopreservation approach of rapid cooling and laser gold nanowarming in millimeter-scale systems.

Labyrinth ice pattern formation induced by near-infrared irradiation

Patterns are broad phenomena that relate to biology, chemistry, and physics. The dendritic growth of crystals is the most well-known ice pattern formation process. Tyndall figures are water-melting patterns that occur when ice absorbs light and becomes superheated. Here, we report a previously undescribed ice and water pattern formation process induced by near-infrared irradiation that heats one phase more than the other in a two-phase system. The pattern formed during the irradiation of ice crystals tens of micrometers thick in solution near equilibrium. Dynamic holes and a microchannel labyrinth then formed in specific regions and were characterized by a typical distance between melted points. We concluded that the differential absorption of water and ice was the driving force for the pattern formation. Heating ice by laser absorption might be useful in applications such as the cryopreservation of biological samples.

Amphibian Assisted Reproductive Technologies: Moving from Technology to Application

Amphibians have experienced a catastrophic decline since the 1980s driven by disease, habitat loss, and impacts of invasive species and face ongoing threats from climate change. About 40% of extant amphibians are under threat of extinction and about 200 species have disappeared completely. Reproductive technologies and biobanking of cryopreserved materials offer technologies that could increase the efficiency and effectiveness of conservation programs involving management of captive breeding and wild populations through reduced costs, better genetic management and reduced risk of species extinctions. However, there are relatively few examples of applications of these technologies in practice in on-the-ground conservation programs, and no example that we know of where genetic diversity has been restored to a threatened amphibian species in captive breeding or in wild populations using cryopreserved genetic material. This gap in the application of technology to conservation programs needs to be addressed if assisted reproductive technologies (ARTs) and biobanking are to realise their potential in amphibian conservation. We review successful technologies including non-invasive gamete collection, IVF and sperm cryopreservation that work well enough to be applied to many current conservation programs. We consider new advances in technology (vitrification and laser warming) of cryopreservation of aquatic embryos of fish and some marine invertebrates that may help us to overcome factors limiting amphibian oocyte and embryo cryopreservation. Finally, we address two case studies that illustrate the urgent need and the opportunity to implement immediately ARTs, cryopreservation and biobanking to amphibian conservation. These are (1) managing the biosecurity (disease risk) of the frogs of New Guinea which are currently free of chytridiomycosis, but are at high risk (2) the Sehuencas water frog of Bolivia, which until recently had only one known surviving male.

Successful cryopreservation of coral larvae using vitrification and laser warming

Climate change has increased the incidence of coral bleaching events, resulting in the loss of ecosystem function and biodiversity on reefs around the world. As reef degradation accelerates, the need for innovative restoration tools has become acute. Despite past successes with ultra-low temperature storage of coral sperm to conserve genetic diversity, cryopreservation of larvae has remained elusive due to their large volume, membrane complexity, and sensitivity to chilling injury. Here we show for the first time that coral larvae can survive cryopreservation and resume swimming after warming. Vitrification in a 3.5 M cryoprotectant solution (10% v/v propylene glycol, 5% v/v dimethyl sulfoxide, and 1 M trehalose in phosphate buffered saline) followed by warming at a rate of approximately 4,500,000 °C/min with an infrared laser resulted in up to 43% survival of Fungia scutaria larvae on day 2 post-fertilization. Surviving larvae swam and continued to develop for at least 12 hours after laser-warming. This technology will enable biobanking of coral larvae to secure biodiversity, and, if managed in a high-throughput manner where millions of larvae in a species are frozen at one time, could become an invaluable research and conservation tool to help restore and diversify wild reef habitats.

Evaluation of a new freezing protocol containing 20% dimethyl sulphoxide concentration to cryopreserve human ovarian tissue

RESEARCH QUESTION

Could a modification in the ovarian tissue freezing protocol improve follicle survival after cryopreservation and xenotransplantation?

DESIGN

Ovarian tissue was used from 13 adult patients, frozen either with our original protocol, or a modified version involving a higher concentration of dimethyl sulphoxide (DMSO), larger volume of cryopreservation solution and lower seeding temperature. After thawing, the ovarian fragments were xenotransplanted to six mice with severe combined immunodeficiency (SCID) for 3 weeks.

RESULTS

The proportion of primordial follicles decreased, and the proportion of growing follicles increased significantly (all P < 0.01) after cryopreservation and xenografting compared with fresh controls for both protocols. Follicle density, development, ultrastructure and function were similar between treatments.

CONCLUSIONS

This study showed that, although the higher DMSO concentration did not improve survival of preantral follicles, it did not seem to induce any major toxicity in the follicle population either.

Influence of Cellular Lipids on Cryopreservation of Mammalian Oocytes and Preimplantation Embryos: A Review

Lipids are among the most abundant and essential cell components. Specifically, cytoplasmic lipid droplets (LDs) play crucial roles in cellular energy homeostasis. The foci of this review are (1) the composition and roles of lipids during oocyte maturation and early embryonic development, (2) possible causes of cryoinjuries in lipid-rich oocytes/embryos, and (3) ways to overcome these detrimental effects. Recent reports show that LDs in oocytes and embryos are not only energy depots but also are active organelles, possessing many other functions. In addition, analysis of the current literature confirms that lipid phase transition followed by phase separation during cryopreservation is one of the major causes of cryodamage in lipid-rich oocytes and embryos. While LDs and cell membranes are sensitive to chilling and freezing conditions, recent advances in vitrification and delipidation of lipid-rich oocytes and embryos partly mitigate cryodamage. The multidisciplinary approach is critical to reveal mechanisms underlying cryodamage and provides a theoretical basis for optimal cryopreservation of lipid-rich oocytes/embryos.

Convective heat transfer coefficients of open and closed Cryotop® systems under different warming conditions

The warming of cryopreserved samples supported by small volume devices is governed by heat transfer phenomena which are mathematically described by the solution of the transient heat conduction partial differential equations; the convective heat transfer coefficient (h) is an important parameter involved in the boundary condition which is related to the fluid dynamic behavior at the interface device-warming fluid (water, sucrose solution or air). Unfortunately, h values for small volume devices (i.e. Cryotop^®) have not been experimentally determined. Moreover, heat transfer coefficients during warming of Cryotop^® cannot be obtained through classical dimensionless correlations expressed in terms of Nusselt vs. Reynolds and Prandtl numbers that are available for regular geometries and single materials. It is the purpose of present work to determine the convective heat transfer coefficients (h) by numerically solving the heat transfer equation applying the finite element method. Numerical simulations allowed to predict time-temperature histories and warming rates under different protocols in Cryotop^® system which were compared with literature warming rates reported for this device. The h values were calculated considering the heterogeneous structure of the domain (microdrop, plastic-support) and the irregular three-dimensional geometry. The warming conditions analyzed were: a) open system in contact with air and sucrose solution at 23 °C) and b) closed system in contact with air and water at 23 °C. The h values of the Cryotop^® open system immersed in sucrose solution (23 °C), that according to literature achieved a survival in the order of 80%, are in the range of 1800-2200 W/m²K. The h values obtained in this work for warming conditions are critical parameters for cryobiologists when studying heat transfer rate in this small volume device.