Testing the toxicity of metals, phenol, effluents, and receiving waters by root elongation in Lactuca sativa L

Earthworm injury test for in-situ biomonitoring of pesticides in biobeds

Biobeds are presented as an alternative for good pesticide wastewater management on farms. This work proposes a new test for in-situ biomonitoring of pesticide detoxification in biobeds. It is based on the assessment of visually appreciable injuries to Eisenia fetida. The severity of the injury to each exposed individual is assessed from the morphological changes observed in comparison with the patterns established in seven categories and, an injury index is calculated. A linear relationship between the proposed injury index and the pesticide concentration was determined for each pesticide sprayed individually in the biomixture. The five pesticides used were atrazine, prometryn, clethodim, haloxyfop-P-methyl and dicamba. In addition, a multiple linear regression model (i.e., a multivariate response surface) was fitted, which showed a good generalization capacity. The sensitivity range of the injury test was tested from 0.01 to 630 mg kg-1 as the total pesticide concentration. This index is then used to monitor the detoxification of these pesticides in a biomixture (composed of wheat stubble, river waste, and soil, 50:25:25% by volume) over 210 days. The results are compared with standardized tests (Eisenia fetida avoidance test and Lactuca sativa seed germination test) carried out on the same biomixture. The results are also compared with data on the removal of pesticides. The injury test showed a better correlation with the removal of pesticides than the avoidance test and seed germination test. This simple and inexpensive test has proved to be useful for decontamination in-situ monitoring in biobeds.

Novel activated carbon from Magonia pubescens bark: characterization and evaluation of adsorption efficiency

In this work, the synthesis of activated carbon from the bark of the Magonia pubescens (known as Tingui) and its efficiency in the removal of diclofenac sodium through batch adsorption tests and physical-chemical characterizations were investigated. The phytotoxicity of this material was also evaluated through germination and root growth of Lactuca sativa seeds. According to the experimental design performed for the synthesis of Tingui carbon, the optimized temperature and residence time for the production of this adsorbent were 550 °C and 120 min, respectively. The equilibrium time was reached in 600 min and the theoretical model that best fitted the kinetic data was the Elovich model. The BET was the best fit for the adsorption isotherm dataThis indicates that the adsorption process of sodium diclofenac by activated carbon can occur by two different mechanisms, monolayer and/or multilayer adsorption, depending on the conditions employed in the process, such as temperature and adsorbate concentration. The thermodynamic study showed that the process was favourable and spontaneous in the temperature range evaluated. Furthermore, the characterizations showed by TG/DTG and FTIR analyses that the temperature throughout the process had a marked impact on the degradation of the organic constituents of the biomass and the appearance of distinct functional groups that contributed to the adsorption process of diclofenac sodium. Finally, the toxicity tests recognized that this adsorbent does not affect the germination of L. sativa species. Thus, this adsorbent may become a novel and viable option to be used in the removal of sodium diclofenac.

Stabilization of residual mercury from gold mining as metacinnabar and cinnabar in ball mills on a pilot scale

Waste liquid mercury generated as a by-product of the Merrill-Crowe process in gold mining and recovered from mercury-containing waste must be stabilized for secure storage or disposal. This study developed a procedure for mercury stabilization. A ball mill with a 0.5 m3 capacity and a rotational speed of 43 rpm was used to stabilize the residual mercury with sulfur. The treatments were conducted for 30, 60, and 90 min at mercury: sulfur molar ratios of 1.0, 0.8, and 0.67. The ball loading ratio was 7.0 with residual mercury, and the temperature was below 40 °C. The treatment efficiency was evaluated by measuring the concentrations of mercury and other metals using the Toxicity Characteristic Leaching Procedure (TCLP), examining the stabilized residual mercury by X-ray diffraction, and conducting bioassays on Daphnia magna and Lactuca sativa. Principal component analysis (PCA) was performed on the aforementioned variables. The 90-min treatment, with a mercury-to-sulfur molar ratio of 0.67, stabilized mercury mainly as cinnabar compared with the other treatments and presented leachate mercury values below the detection limit <0.003. The leachate from the treatments also showed values of 21.28-38.44 toxic units, classified as very toxic, and generated toxicity, particularly for D. magna, because of the presence of other metals such as Al, Ba, B, Ca, Cu, Cr, Fe, Mn, Ni, and Zn. The variability of the residues in the PCA analysis was explained by the treatment effect and the presence of other metals in the residual mercury. The stabilized residual mercury obtained was classified as non-hazardous and could be stored or disposed of as ordinary waste in a security landfill.

Bioremediation of petroleum refinery wastewater using Bacillus subtilis IH-1 and assessment of its toxicity

Environmental contamination from petroleum refinery operations has increased due to the rapid population growth and modernization of society, necessitating urgent repair. Microbial remediation of petroleum wastewater by prominent bacterial cultures holds promise in circumventing the issue of petroleum-related pollution. Herein, the bacterial culture was isolated from petroleum-contaminated sludge samples for the valorization of polyaromatic hydrocarbons and biodegradation of petroleum wastewater samples. The bacterial strain was screened and identified as Bacillus subtilis IH-1. After six days of incubation, the bacteria had degraded 25.9% of phenanthrene and 20.3% of naphthalene. The treatment of wastewater samples was assessed using physico-chemical and Fourier-transform infrared spectroscopy analysis, which revealed that the level of pollutants was elevated and above the allowed limits. Following bacterial degradation, the reduction in pollution parameters viz. EC (82.7%), BOD (87.0%), COD (80.0%), total phenols (96.3%), oil and grease (79.7%), TKN (68.8%), TOC (96.3%) and TPH (52.4%) were observed. The reduction in pH and heavy metals were also observed after bacterial treatment. V. mungo was used in the phytotoxicity test, which revealed at 50% wastewater concentration the reduction in biomass (30.3%), root length (87.7%), shoot length (93.9%), and seed germination (30.0%) was observed in comparison to control. When A. cepa root tips immersed in varying concentrations of wastewater samples, the mitotic index significantly decreased, suggesting the induction of cytotoxicity. However, following the bacterial treatment, there was a noticeable decrease in phytotoxicity and cytotoxicity. The bacterial culture produces lignin peroxidase enzyme and has the potential to degrade the toxic pollutants of petroleum wastewater. Therefore the bacterium may be immobilised or directly used at reactor scale or pilot scale study to benefit the industry and environmental safety.

Optimizing Allelopathy Screening Bioassays by Using Nano Silver

Nano solutions are widely used in medicine and also have the potential to be used when performing allelopathy screening studies. The present experiment aimed to test the effectiveness of colloidal nano silver Silver-Amber© with nanoparticles of 20 nm (>20 mg/L at a purity level of 99.99%) as a carrier of allelochemicals in laboratory conditions. The influence of eleven concentrations of Silver-Amber© (0.10, 0.20, 0.39, 0.78, 1.56, 3.13, 6.25, 12.5, 25.0, 50.0 and 100.0% v/v) on the germination and initial development of test plant Lactuca sativa L. in 0.75% agar medium was studied. Data revealed that when increasing the quantitative ratio of Silver-Amber©, an inhibitory effect on seed germination (from 37.8 to 94.3%) and on the plant growth (from 54.0 to 98.9%) appeared. Lower concentrations (0.63 to 0.04 ppm) had an indifferent to statistically unproven stimulatory effect on the germination and initial development of L. sativa (GI ranged from 88.7-94.6%). Therefore, nano silver can be used as carrier of allelochemicals in allelopathic studies in laboratory conditions.

A study on phytogenotoxicity induced by biogenic amines: cadaverine and putrescine

Among the compounds present in necro-leachate, a liquid released during the process of decomposition of the human body, are the biogenic amines cadaverine and putrescine. Although some studies on necro-leachate have indicated a potential ecotoxicological and public health risk associated with it, the research on this type of contamination is still rather limited. This study presents information about the phytotoxic and cytogenotoxic potential of cadaverine and putrescine, evaluated separately and within a mixture. Phytotoxicity was evaluated through a germination test, the initial growth of seedlings with Lactuca sativa, and cytogenotoxicity through chromosomal aberration and micronucleus tests with Allium cepa. The L. sativa results showed a phytotoxic effect for the evaluated amines, by reducing root (> 90%) and hypocotyl (> 80%) elongation. The co-exposure of cadaverine and putrescine potentiated cytogenotoxic activity by aneugenic action in the meristematic cells of A. cepa. From this result, it is possible to infer the eco-toxicogenic potential of cadaverine and putrescine. This study not only highlights the importance of the phytotoxic and cytogenotoxic effects of these amines but also emphasizes the urgent need for further investigation into contamination originating from cemetery environments. By evaluating the risks associated with necro-leachate, this research is aimed at informing global efforts to protect ecological and public health.

Physicochemical and ecotoxicological approaches for Moknine Continental Sebkha in Tunisia

Degradation of water quality is an emerging issue in many developing countries. In this context, industrial and domestic effluents heavily contaminate the coast of Moknine Continental Sebkha in Tunisia. The present study aimed to biomonitor the seawater quality of the Moknine Continental Sebkha coast using physicochemical and ecotoxicological approaches. The ecotoxicological assessment was performed using three species representing different trophic levels, namely Vibrio fischeri, Selenastrum capricornutum, and Lepidium sativum. In the physicochemical analysis such as BOD (biochemical oxygen demand), COD (chemical oxygen demand), TSS (total suspended solids), TOC (total organic carbon), NO3- (nitrate), AOX (adsorbable organic halogen), the recorded levels of pH and total suspended solids did not comply with the Tunisian standard (NT.09.11/1983). The ecotoxicological data confirmed that the tested water samples displayed toxicity to two test indicators L. sativum and S. capricornutum. A targeted chemical screening of the Moknine Continental Sebkha coast previously performed revealed the presence of total mercury, four phthalate acid esters, and one non-phthalate plasticizer, a fact that could explain the observed ecotoxicological effects and therefore might harm the biotic area and the health of the surrounding population.

Identification of organic pollutants and heavy metals in natural rubber wastewater and evaluation its phytotoxicity and cytogenotoxicity

The natural rubber industry consumes large volumes of water and annually releases wastewater with rich organic and inorganic loads. This wastewater is allowed for soil irrigation in developing countries. However, the pollutant composition in wastewater and its environmental effects remain unclear. Therefore, we aimed to assess the wastewater's physicochemical parameters, toxic organic pollutants, heavy metals, and phytotoxic and cytogenotoxic. The result revealed that values of comprehensive wastewater parameters were recorded as chemical oxygen demand (187432.1 mg/L), pH (4.23), total nitrogen (1157.1 mg/L), ammonia nitrogen (1113.0 mg/L), total phosphorus (1181.2 mg/L), Zn (593.3 mg/L), Cr (0.6127 mg/L), and Ni (0.2986 mg/L). The organic compounds detected by LC-MS were salbostatin, sirolimus, Gibberellin A34-catabolite, 1-(sn-glycero-3-phospho)-1D-myo-inositol, and methyldiphenylsilane. The toxicity of the identified toxic chemicals and heavy metals was confirmed by onion and mung bean phytotoxicity characterization tests. The wastewater affected the germination of mung bean seeds, reduced or inhibited the growth of onions, and induced various chromosomal aberrations in root apical meristems. Our study shows that the treatment of natural rubber wastewater needs to be improved, and the feasibility of irrigating soil with wastewater needs to be reconsidered.

Exhausted fire-extinguishing powders: A potential source of mineral nutrients for reuse and valorisation in compost enrichment for soilless cultivation

Fire-extinguishing powders (FEPs) are constituted by an inner mineral core of (NH4)H2PO4 and (NH4)2SO4 salts (>95 %, by weight) externally coated with Si-based additives, which make problematic reuse after their service life has expired (36 months). This study aimed to assess the feasibility of using the composting process as an environmentally friendly strategy to lyse the external coating and recycle this nutrient-rich solid waste for replacement of inorganic fertilization in soilless cultivation of horticultural crops. A microcosm-scale experiment with lettuce plants grown into a soil/quartz sand mixture under controlled conditions for 28 days was used to investigate plant responses (fresh and dry biomass, chlorophyll fluorescence parameters, root morphology, ash and nutrients content) to amendment with increasing dosages (equivalent at 0, 10, 20 and 30 t ha-1) of an exhausted FEPs-enriched compost. Chemical properties (pH, EC, TOC, TN) and content of soluble nutrients (Na+, K+, Mg2+, Ca2+, NH4+, H2PO4-, SO42-, NO3-, Cl-) released into the growing substrate were also monitored. Non-amended microcosms and non-enriched compost treatments were taken as controls. Results showed, beside the expected rise of phosphate, sulphate and ammonium ions, exhausted FEPs contributed Ca2+, Mg2+ and Na+ content. Whereas compost determined a dose-dependent release of K+, which was particularly useful in maintaining the K/Na ratio in a range not harmful to plant physiology. It was also found that the compost enriched with 5 % (w/w) exhausted FEPs was no phytotoxic to lettuce. On the contrary, it stimulated the plant growth, increased the photosynthetic efficiency and the shoot biomass accumulation, thus incrementing the shoot/root ratio. Moreover, it oriented the root morphology development and promoted the plant uptake of both water and solutes. To sum up, composting represents a suitable alternative to chemical treatment to recover readily available nutrients contained in exhausted FEPs and produce an enriched compost for use in soilless cultivation.

Biodegradation and Detoxification of Low-Density Polyethylene (LDPE) by Stenotrophomonas sp. and Alcaligenaceae bacterium

Every year, human activities introduce large amounts of synthetic plastics into the environment. Decomposition of the plastic derivatives is very difficult and time consuming, so it is essential to eliminate these pollutants using different methods. Bioremediation, is suitable option, because of the low cost and environmentally safe. In this research, degradation of low-density polyethylene (LDPE) was investigated by two strains, isolated from Hamadan province (Iran) landfill soil. After identification by 16sr DNA primers, their abilities of polyethylene biodegradation were examined by Fourier transform infrared (FTIR), SEM and Gas Chromatography-Mass Spectrometry (GC-MS). Using media contain polyethylene) after and before addition of bacteria), toxicity test was conducted by measuring the germination index, root and hypocotyl length of Lactuca sativa seed. After three months, 10.15% ± 1.04 weight loss of LDPE achieved through strain Stenotrophomonas sp. degradation. Both strains had high biofilm formation capacity, confirmed by Electron microscope images and FTIR analysis. GC-MS confirmed the presence of the end-product of LDPE degradation (Pentacosane, Hexacosane, and Octadecane). Both, Stenotrophomonas sp. and Alcaligenaceae bacterium had significant detoxification ability. In media contain LDPE (without bacteria), decrease in the germination of lettuce seeds was observed.

Spring water quality monitoring using multiple bioindicators from multiple collection sites

The aim of this study was to examine the water quality of the Extrema River spring in a Brazilian Cerrado area. Three collection sites (P1 - P3) were sampled in the dry and rainy seasons, which are close to industries from different sectors. In the physicochemical analysis, a decrease in dissolved oxygen levels (<5 mg/L) and pH (< 6) at P3 was detected. An increase in heterotrophic bacteria count was recorded at all sites (> 500 colonies/ml). In ecotoxicological analyses, P2 and P3 exhibited toxicity using Vibrio fischeri (> 20%). In evaluating toxicity, the reduction in seed germination was significant utilizing Lactuca sativa at all locations and with Allium cepa only at P2; rootlet length was decreased at P3 on L. sativa and at all sites with A. cepa. In contrast, loss of membrane integrity and mitochondrial function of meristems was adversely affected at all locations using both L. sativa and A. cepa assays. Principal components analysis (PCA) approach indicated that seasonality apparently did not markedly interfere with the obtained data, but it is important to include more collection locations to be evaluated with multiple bioindicators in the spring region. Our data indicate the urgent need for more rigorous programs to monitor the discharge of effluents into water springs.

Phytotoxicity of coal waste elutriates (Douro Coalfield, North Portugal) in Lactuca sativa

One of the most important mining areas in the Douro Carboniferous Basin is the Pejão Coalfield. In the summer of 2017, a wildfire promoted the ignition and self-burning some of the coal waste piles in the area and caused important environmental changes, promoting a new heterogenic pedological zonation. This study aims to assess the ecotoxicological effects of 25 soil elutriates from these different soil types in seed germination and individual (emergence, growth, and morphologic alterations) and subindividual parameters in Lactuca sativa. The different evaluated endpoints were differently affected regarding the soil elutriate revealing the high heterogeneity of soil characteristics. The presence of different potentially toxic elements (e.g., Cd, Cr, Pb, Zn) in soil elutriates, even in low concentrations, caused effects on L. sativa development. Unburned coal wastes and downhill soil elutriates were able to inhibit the germination of L. sativa and affect them individually and sub-individually (decrease in size, biomass, and presence of morphological alterations). Additionally, it was observed that all soil elutriates induce a decrease in root size. The results highlight the importance of using elutriate samples in phytotoxicity studies of coal mining waste, since the tailings lixiviate may reduce plant establishment and growth, affecting the terrestrial ecosystems. The integrated use of seed germination assays with the analysis of morphological and biochemical alterations in plants proved to be sensitive parameters to evaluate the phytotoxicity of coal mining wastes.

Model-Based Analysis of Lactuca sativa Root Growth under the Action of Herbicides in Milli-Channel Arrays with In Situ Imaging

Extracting practical information from the large amounts of data gathered during the live imaging analysis of plant organs is a challenging issue. The present work investigates the use of the logistic growth model to analyze experimental data from root elongation assays performed in milli-fluidic devices with in situ imaging. Lactuca sativa was used as a bioindicator and was subjected to wide concentration ranges of four different herbicides: 2,4-D, atrazine, glyphosate, and paraquat. The model parameters were directly connected to standard indicators of toxicity and plant development, such as the LD50 and the absolute growth rate, respectively. In addition, it was found that realistic predictions of the maximum root length can be achieved about 60 h before the bioassay end point, which could significantly shorten the turnaround time. The combination of milli-fluidic devices, real-time imaging, and model-based data analysis becomes a powerful tool for environmental studies and ecotoxicity testing.

Microbial fuel cell: Interplay of energy production, wastewater treatment, toxicity assessment with hydraulic retention time

Microbial fuel cell (MFC) operation under similar conditions to conventional methods will support the use of this technology in large-scale wastewater treatment. The operation of scaled-up air-cathode MFC (2 L) fed with synthetic wastewater (similar to domestic) in a continuous flow was evaluated using three different hydraulic retention times (HRT), 12, 8, and 4 h. We found that electricity generation and wastewater treatment could be enhanced under an HRT of 12 h. Additionally, the longer HRT led to greater coulombic efficiency (5.44%) than MFC operating under 8 h and 4 h, 2.23 and 1.12%, respectively. However, due to the anaerobic condition, the MFC was unable to remove nutrients. Furthermore, an acute toxicity test with Lactuca sativa revealed that MFC could reduce wastewater toxicity. These outcomes demonstrated that scaled-up MFC could be operated as a primary effluent treatment and transform a wastewater treatment plant (WWTP) into a renewable energy producer.

Valorization of Baker Yeast Industry Waste in Agriculture by Improving Germination and Growth of Barley and Pea

Industrial waste still present an environmental danger for the nature and survival of all living beings. Among these toxic products, the focus has been on liquid effluents from the baker's yeast industry that cause real environmental problems mainly due to their pollutant load and the release of unpleasant odors. In order to minimize these hazards and to take advantage of these wastes for the sake of our environment, the present work consists on valorizing effluents from the baker's yeast industry on barley (Hordeum vulgare) and pea (Pisum sativum), two important agricultural products of Tunisian north-west. Results showed that this waste is characterized by its richness in organic matter, and the presence of proteins traces with high chemical and biochemical oxygen demand (COD and BOD5) values. Diluted effluent at a dose of 2.5 mg/g significantly improves germination of both plant seeds by germination index (GI) calculation, to reach a maximum of 190 ± 17% and 150 ± 14% for barley and pea, respectively. In fertigation experiment, the use of a lower dose of .62 mg/g of diluted effluent promotes plant length to reach 52 ± 4 cm and 45 ± 1.4 cm, respectively, for H. vulgare and P. sativum. Gas chromatography coupled to mass spectrometry (GC-MS) analysis after derivatization showed significant enhancement of auxin production in pea treated with .62 mg/g of cream compared to control with a concentration of 10.60 ± .81 and 8.16 ± .43 ng/gFW, respectively. In another experiment, the irrigation of pea plants with furfural, as major compound of cream, promotes length and auxin production to reach 9.89 ± .56 ng/gFW for a furfural dose of .31 mg/g. This leads us to valorize baker's yeast effluent as an environment-friendly natural product in pea and barley agricultural and give insight to its mode of action.

Fabrication of a SnO2-Sb electrode with TiO2 nanotube array as the middle layer for efficient electrochemical oxidation of amaranth dye

Efficient, stable, and easily producible electrodes are useful for treating dye wastewater through electrochemical oxidation. In this study, an Sb-doped SnO₂ electrode with TiO₂ nanotubes as the middle layer (TiO₂-NTs/SnO₂-Sb) was prepared through an optimized electrodeposition process. Analyses of the coating morphology, crystal structure, chemical state, and electrochemical properties revealed that tightly packed TiO₂ clusters provided a larger surface area and more contact points, which is conducive to reinforcing the binding of SnO₂-Sb coatings. Compared with a Ti/SnO₂-Sb electrode without a TiO₂-NT interlayer, the catalytic activity and stability of the TiO₂-NTs/SnO₂-Sb electrode significantly improved (P < 0.05), as reflected by the 21.8% increase in the amaranth dye decolorization efficiency and 200% increase in the service life. The effects of current density, pH, electrolyte concentration, initial amaranth concentration, and the interaction between various combinations of parameters on the electrolysis performance were investigated. Based on response surface optimization, the maximum decolorization efficiency of the amaranth dye could reach 96.2% within 120 min under the following set of optimized parameter values: 50 mg L^-1 amaranth concentration, 20 mA cm^-2 current density, and 5.0 pH. A potential degradation mechanism of the amaranth dye was proposed based on the experimental results of a quenching test, ultraviolet-visible spectroscopy, and high-performance liquid chromatography-mass spectrometry. This study provides a more sustainable method for fabricating SnO₂-Sb electrodes with TiO₂-NT interlayers to treat refractory dye wastewater.

Paracetamol ecotoxicological bioassay using the bioindicators Lens culinaris Med. and Pisum sativum L

Paracetamol is one of the most widely used drugs worldwide, yet its environmental presence and hazardous impact on non-target organisms could rapidly increase. In this study, the possible cytotoxic effects of paracetamol were evaluated using two bioindicator plants Lens culinaris and Pisum sativum. Concentrations of 500, 400, 300, 200, 100, 50, 25, 5, 1 mg L-1, and a control (distilled water) were used for a total of 10 treatments, which were subsequently applied on seeds of Lens culinaris Med. and Pisum sativum L.; after 72 h of exposure, root growth, mitotic index, percentage of chromosomal abnormalities, and the presence of micronucleus were evaluated. The cytotoxic effect of paracetamol on L. culinaris and P. sativum was demonstrated, reporting the inhibition of root growth, the presence of abnormalities, and a significant micronucleus index at all concentrations used, which shows that this drug has a high degree of toxicity.

Bioremediation of hydrocarbon contaminated soil using local organic materials and earthworms

Bioremediation technologies have demonstrated significant success on biological quality recovery of hydrocarbon contaminated soils, employing techniques among which composting and vermiremediation stand out. The aim of this study was to evaluate the efficiency of these processes to remediate diesel-contaminated soil, employing local organic materials and earthworms. During the initial composting stage (75 days), the substrate was made up using contaminated soil, lombricompost, rice hulls and wheat stubbles (60:20:15:5% w/w). Diesel concentration in the contaminated substrate was about 5 g kg^-1, equivalent to a Total Petroleum Hidrocarbons (TPH) experimental concentration of 3425 ± 50 mg kg^-1. During the later vermiremediation stage (60 days), the earthworm species Eisenia fetida and Amynthas morrisi were evaluated for their hydrocarbon degradation capacity. Physicochemical and biological assays were measured at different times of each stage and ecotoxicity assays were performed at the end of the experiments. TPH concentration reduced 10.91% after composting and from 45.2 to 60.81% in the different treatments after vermiremediation. Compared with TPH degradation in the treatment without earthworms (16.05%), results indicate that earthworms, along with indigenous microorganisms, accelerate the remediation process. Vermiremediation treatments did not present phytotoxicity and reflected high substrate maturity values (>80% Germination Index) although toxic effects were observed due to E. fetida and A morrisi exposure to diesel. Vermiremediation was an efficient technology for the recovery of substrate biological quality after diesel contamination in a short period. The addition of organic materials and suitable food sources aided earthworm subsistence, promoted the decontamination process and improved the substrate quality for future productive applications.

Ecotoxicological risk assessment in soils contaminated by Pb and As 20 years after a mining spill

This study evaluates the potential toxicity of the soils of the Guadiamar Green Corridor (GGC) affected by the Aznalcóllar mine spill (Andalusia, Spain), one of the most important mining accidents in Europe in recent decades. Twenty years after the accident, although the area is considered to be recovered, residual contamination in soils persists, and the bioavailability of some contaminants, such as As, is showing trends of increasing. Therefore, the potential residual toxicity in 84 soil samples was evaluated by bioassays with lettuce (Latuca sativa L.), earthworms (Eisenia andrei) and determining the microbial activity by basal respiration and metabolic quotient. The selected soils sampled along the GGC were divided into 4 types according to their physicochemical properties. In the closest part of the mine two soil types appear (SS1 and SS2), originally decarbonated and loamy, with a reduction in lettuce root elongation of 57% and 34% compared to the control, as well as a the highest metabolic quotient (23.9 and 18.1 ng Cc_O2 μg Cmicrob^-1 h^-1, respectively) with the highest risk of Pb and As toxicity. While, located in the middle and final part of the affected area of the spill (SS3 and SS4), soils presented alkaline pH, finer textures and the lowest metabolic quotient (<9.5 ng Cc_O2 μg Cmicrob^-1 h^-1). In addition, due to Pb and As exceeded the Guideline values established in the studied area, the human toxicity risk was determined according to US-EPA methodology. Although the total contents were higher than the Guidelines established, the obtained hazard quotients for both contaminants were less than one, so the risk for human health was discarded. However, monitoring over time of the toxicity risks of the GGC soils would be advisable, especially due to the existence of areas where residual contamination persist, and soil hazard quotient obtained for As in children was higher and close to unity.

Detection and identification of hazardous organic pollutants from distillery wastewater by GC-MS analysis and its phytotoxicity and genotoxicity evaluation by using Allium cepa and Cicer arietinum L

Distillery industry generates a huge amount of wastewater, which contains a high strength of organic and inorganic load. Accordingly, this study aims to analyze the physico-chemical pollution parameters and the occurrence of phytotoxic, cytotoxic and genotoxic pollutants in wastewater. The result revealed that values of wastewater parameters were recorded as 13268 mg l^-1 (BOD), 25144 mg l^-1 (COD), 25144 mg l^-1 (TS), and 6634 mg l^-1 (phosphate), while pH was alkaline. The organic compounds detected by GC-MS were quercetin 7,3',4'-trimethoxy, octadecadienoic acid, propanoic acid, glycocholic acid methyl ester, cantaxanthin, etc. The Allium cepa was used for the toxicity test with different concentrations of wastewater showed a significant level of reduction in root growth and length after exposure and the maximum reduction was at 25% and 20%. Phytotoxicity studies were performed using Cicer arietinum L. with different concentrations of wastewater, which showed adverse effects on seed germination, root length, and the effect was associated with the increasing concentration of wastewater. A. cepa root tips were used for the analysis of mitotic index (MI), nuclear abnormalities (NA), and chromosomal aberrations (CA). MI was decreasing significantly from 72% (control) to 33%, 22%, 23%, 21%, and 18% at 5%, 10%, 15%, 20%, and 25% wastewater concentration, respectively. The A. cepa root tip cells showed chromosomal aberrations and nuclear abnormalities like vagrant, stickiness, chromosomal loss, c-mitosis, binucleated, micronuclei, and aberrant cell. This study concluded that the wastewater treatment process is insufficient and the discharged waste needs a proper assessment to know the associated health risk.

Bioremediation of phenolic pollutants by algae - current status and challenges

Industrial production processes, especially petroleum processing, will produce high concentration phenolic wastewater. Traditional wastewater treatment technology is costly and may lead to secondary pollution. In order to avoid the adverse effects of incompletely treated phenolics, more advanced methods are required. Algae bioremediate phenolics through green pathways such as adsorption, bioaccumulation, biodegradation, and photodegradation. At the same time, the natural carbon fixation capacity of algae and its potential to produce high-value products make algal wastewater treatment technology economically feasible. This paper reviews the environmental impact of several types of phenolic pollutants in wastewater and different strategies to improve bioremediation efficiency. This paper focuses on the progress of algae removing phenols by different mechanisms and the potential of algae biomass for further biofuel production. This technology holds great promise, but more research on practical wastewater treatment at an industrial scale is needed in the future.

Phytotoxic and cytogenotoxic assessment of glyphosate on Lactuca sativa L

The active ingredient glyphosate is the most commercialized herbicide on the world market due to its capability in eliminating weeds. However, it can harm the development of non-target organisms and threaten environmental quality. This study analyzed the effects of potentially toxic concentrations of glyphosate on germination, growth, cell cycle and genomic stability of Lactuca sativa L., and identified the most sensitive variables for assessing the toxicity of this herbicide to this biomonitor. Seeds of L. sativa were germinated in Petri dishes containing a sheet of filter paper moistened with 5 mL of a concentration of glyphosate (1.34, 3.35, 6.70, 10.05, 13.40 mg L-1). Controls consisted of distilled water (negative) and 3 mg L-1 CuSO4 (positive). Macroscopic and microscopic variables were analyzed. The germination of L. sativa was not affected by the concentrations of glyphosate. Root length and shoot height of the plants and the mitotic index decreased from the lowest concentration tested on. The chromosomal anomaly index and frequency of micronuclei increased by 3.2 and 22 times, respectively, with the presence of the lowest concentration of glyphosate compared to the negative control. The observed phytotoxic and cytogenotoxic effects demonstrate the negative influence that glyphosate has on the development of L. sativa. Root length and microscopic variables showed the highest sensitivity. This study warns of the possible harmful effects that glyphosate can have on non-target organisms and suggests greater control over the use of this herbicide to mitigate its environmental impact.

Antarctic yeasts: potential use in a biologic treatment of textile azo dyes

We investigated the dye-removal potential of a collection of 61 cold-adapted yeasts from the King George Island, Antarctica, on agar plates supplemented with 100 mg L-1 of several textile dyes; among which isolates 81% decolorized Reactive Black 5 (RB-5), with 56% decolorizing Reactive Orange 16, but only 26% doing so with Reactive Blue 19 and Acid Blue 74. Furthermore, we evaluated the ligninolytic potential using 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic-acid) diammonium salt-, 3,5-dimethoxy-4-hydroxybenzaldehydazine-, or manganese-supplemented plates but detected no activity, possibly due to a dye-removal mechanism involving reductases. The removal kinetics were studied in liquid medium supplemented with 100 mg L-1 of RB-5 in a selection of 9 yeasts. The highest volumetric-removal rates (η) were found for Candida sake 41E (4.14 mg L-1 h-1), Leucosporidium muscorum F20A (3.90 mg L-1 h-1), and Cystofilobasidium infirmominiatum F13E (3.90 mg L-1 h-1). Different UV-Vis spectra were obtained if the dye removal occurred by biodegradation or biosorption/bioaccumulation. L. muscorum F20A was selected to study the dye-removal mechanism of RB-5 and the effect of different chemical and environmental parameters on the process. Optimum dye-removal conditions were obtained with 10 g L-1 of glucose within an initial medium pH range of 5.0 to 6.0. Up to 700 mg L-1 of dye could be removed in 45 h. High-performance liquid chromatography profiles obtained were consistent with a biodegradation of the dye. Phytotoxicity was estimated by calculating the 50%-inhibition concentration (IC50) with Lactuca sativa L. seeds. These findings propose psychrophilic yeasts as a novel environmentally suitable alternative for the treatment of dye-industry wastewaters.

In Vitro Potential of Clary Sage and Coriander Essential Oils as Crop Protection and Post-Harvest Decay Control Products

Owing to their various application fields and biological properties, natural products and essential oils (EO) in particular are nowadays attracting more attention as alternative methods to control plant pathogens and pests, weeds, and for post-harvest applications. Additionally, to overcome EO stability issues and low persistence of effects, EO encapsulation in β-cyclodextrin (β-CD) could represent a promising avenue. Thus, in this work, the EO distilled from two aromatic plants (Salvia sclarea L. and Coriandrum sativum L.) have been evaluated in vitro for their antifungal, herbicidal and insecticidal activities, against major plant pathogens and pests of agronomical importance. Both plants were grown on unpolluted and trace-element-polluted soils, so as to investigate the effect of the soil pollution on the EO compositions and biological effects. These EO are rich in oxygenated monoterpenes (clary sage and coriander seeds EO), or aliphatic aldehydes (coriander aerial parts EO), and were unaltered by the soil pollution. The tested EO successfully inhibited the growth of two phytopathogenic fungi, Zymoseptoria tritici and Fusarium culmorum, displaying IC₅₀ ranging from 0.46 to 2.08 g L⁻¹, while also exerting anti-germinative, herbicidal, repellent and fumigant effects. However, no improvement of the EO biological effects was observed in the presence of β-CD, under these in vitro experimental conditions. Among the tested EO, the one from aerial parts of coriander displayed the most significant antifungal and herbicidal effects, while the three of them exerted valuable broad-range insecticidal effects. As a whole, these findings suggest that EO produced on polluted areas can be of great interest to the agricultural area, given their faithful chemical compositions and valuable biological effects.

Assessment of effluents quality through ecotoxicological assays: evaluation of three wastewater treatment plants with different technologies

The water quality of the effluents is mainly focused on physicochemical and microbiological parameters. However, the ecotoxicological assessments are crucial to ensure an effective water quality of the effluents. This work aims to assess the ecotoxicity of effluents originated from WWTPs with different wastewater treatment technologies. For that, effluent samples from three WWTPs with different treatment processes were seasonally collected. Physicochemical parameters were determined, the toxicity towards daphnia, protozoan, and microalgae organisms was evaluated, and data correlated. Toxicity assays showed different susceptibility of the organisms to the effluents and that toxicity is dependent on the season and wastewater treatment technology. No toxicity was observed to daphnia in winter and spring, but ~100% of mortality was observed in effluent from WWTP A in summer. Growth inhibition was observed for both protozoan and microalgae for all effluents and in all seasons with highest values in spring in WWTP C (~80%) for the protozoan while the highest microalgae growth inhibition percentage was observed for WWTP B in both spring (~80%) and summer (~80%). These results show that effluents might have negative impacts into their receiving water systems and highlight that a global assessment of effluent quality should include ecotoxicological assays to complement physicochemical and microbiological data for an operative environmental management of wastewater treatment plants.

Bioassays to screen the toxicity in drinking water samples collected in Brazilian rural area

Agriculture activities have increased the concentration of pesticides and metals in the environment. The excessive use of pesticides can generate an environmental impact and contribute to the development of human diseases. This study aimed to determine the presence of pesticides and metals in water samples collected in the Brazilian rural area in two different periods (before and after pesticide application) and to evaluate the alternative bioassays Lactuca sativa, Allium cepa, and Caenorhabditis elegans to monitoring toxicity in human drinking water samples. Eight sites in the rural area were selected and water samples were collected in two different periods of the year (before and after pesticide application). The presence of the pesticides was determinated by ultra-high performance liquid chromatography-tandem mass spectrometry and metals by inductively coupled plasma mass spectrometry. The potential toxicity of the water samples was performed with three different alternatives in vivo models (L. sativa, A. cepa, and C. elegans). Fifty-seven pesticides were analyzed and, according to the results, the most found ones were clomazone, atrazine, tebuconazole, metconazole, pyrimethanil, and carbofuran-3-hydroxide, which is a metabolic degradation product of insecticide carbofuran. The most detected metals were Cu, Cr, Mg, Fe, and Mn. The assays with L. sativa and A. cepa showed alterations in the period after pesticide application, while C. elegans presented changes in both periods compared to the same collection sites. These results indicate that bioassays, especially C. elegans, could be complementary and useful tools for monitoring the toxicity in drinking water samples.

Vinasse from sugarcane bagasse (hemicellulose) acid hydrolysate and molasses supplemented: biodegradability and toxicity

Vinasse sugarcane is a valuable byproduct of the ethanol production process, presenting a perspective of volume increase with the development of second generation ethanol (2GE). However, this byproduct needs new methods of treatment and management for sustainability. Besides that, 2GE vinasse can be associated with some compounds (such as furan derivatives, phenolic compounds and organic acids), depending on the process used to solubilize hemicellulose, which could compromise vinasse destination or utilization. For this reason, detoxification methods of the hemicellulosic hydrolysates, from which vinasse is obtained in subsequent steps, are crucial. This study aimed to investigate whether the biological detoxification of vinasse from 2GE presents a difference concerning the microbial activity of biodegradation and toxicity when compared to vinasse without the detoxification process. Two vinasses (1, before; and 2, after detoxification) from fermented sugarcane bagasse (hemicellulose fraction) acid hydrolysate (supplemented with its molasses), under different concentrations: 2.5; 5 e 10% were evaluated. Their physicochemical characterization, biodegradation microbial activity (through Bartha and Pramer respirometric method, with total count of heterotrophic bacteria and fungi), and toxicity evaluation (through bioassays with Lactuca sativa at concentraction: 2.5; 5 e 10% and Daphnia similis to 1.5; 2.5; 3.5; 4.5; 5 and 10%) were performed. The results indicated high mineral and organic matter, which under a specific circumstance (2.5% of soil conditioning), enabled high efficiency in biodegradation (>80%). The bioassays with L. sativa signaled negative effect for radicular growth when the vinasses were applied at a concentration of 5 and 10% (sublethal effect and delayed root growth). Acute effects were observed in D. similis, with 50% of immobilization, at concentrations of 4.13% and 4.74% for vinasses 1 and 2, respectively. These results indicate that the biodegradation of vinasse from sugarcane bagasse acid hydrolysate occurs at relatively low levels (up to 5%) and suggests that higher concentrations (≥10%) may impair the growth of soil-associated microorganisms.

Assessing the Quality of Amazon Aquatic Ecosystems with Multiple Lines of Evidence: The Case of the Northeast Andean Foothills of Ecuador

We assessed the quality of Andes-Amazonia streams in Ecuador impacted by gold mining (GM), discharges from inefficient sewage network in urban areas (UA), wastes from fish farming (FF) and from non-functional landfill (LF) and other few threats (FT). We selected three lines of evidence (LOE) that were used separately and integrated into a index: water quality (WQI) and macroinvertebrate community (AAMBI) indices and phytotoxicity tests. Streams affected by UA and LF had the lowest scores to WQI and phytotoxicity, and by GM had the lowest scores to AAMBI. Macroinvertebrate absence in GM should be considered as a warning signal of long-term mining impacts in the area. The integrated LOE index showed that sites with identified threats had 30%-53% stream quality decline compared to FT sites. The use of the selected LOE seems to be a useful tools for long-term monitoring and evaluation of this sensitive aquatic ecosystem.

Treatment of a clinical analysis laboratory wastewater from a hospital by photo-Fenton process at four radiation settings and toxicity response

The photo-Fenton process was performed with four radiation settings to treat clinical analysis laboratory wastewater (CALWW) from a hospital, with the aim of evaluating its treatability and acute toxicity response in Daphnia magna and Lactuca sativa. The experiments were performed in a borosilicate bench-scale conventional reactor for 320 min. The light radiation was suspended 13 cm from the CALWW surface for mild radiation or immersed into the matrix for intense radiation. All photo-Fenton experimental conditions were set at pH 3.0, 15 mg L^-1 of Fe²⁺, and initial H₂O₂ of 300 mg L^-1. The initial Fe²⁺ concentration was converted to Fe³⁺ ion in the first 15 min of photooxidation for all processes. Furthermore, the intense radiation processes regenerated Fe²⁺ faster than other systems. Neither mild UVA-Vis nor mild UVC-Vis radiation significantly treated the organic matter or phenols. However, mild UVC-Vis resulted in a higher biodegradability transformation rate (biochemical oxygen demand/chemical oxygen demand 0.51), indicating that it could treat more recalcitrant organic matter than mild UVA-Vis. Intense radiation proved to be more efficient, with a chemical oxygen demand removal rate of 95% for intense UVA-Vis and 99% for intense UVC-Vis treatments. All treatments reduced acute toxicity in D. magna. Moreover, photo-Fenton treatment by intense UVA-Vis decreased toxicity ~98%, compared to mild and intense UVC-Vis, ~75%. Both of the mild radiation treatments inhibited the germination of L. sativa seeds. The intense UVA-Vis photo-Fenton treatment was the only setting that removed phytotoxicity, resulting in a non-significant effect, and the intense UVC-Vis treatment inhibited the seed growth.

Insights on Molecular Characteristics of Hydrochars by 13C-NMR and Off-Line TMAH-GC/MS and Assessment of Their Potential Use as Plant Growth Promoters

Hydrochar is a carbon-based material that can be used as soil amendment. Since the physical-chemical properties of hydrochar are mainly assigned to process parameters, we aimed at evaluating the organic fraction of different hydrochars through ¹³C-NMR and off-line TMAH-GC/MS. Four hydrochars produced with sugarcane bagasse, vinasse and sulfuric or phosphoric acids were analyzed to elucidate the main molecular features. Germination and initial growth of maize seedlings were assessed using hydrochar water-soluble fraction to evaluate their potential use as growth promoters. The hydrochars prepared with phosphoric acid showed larger amounts of bioavailable lignin-derived structures. Although no differences were shown about the percentage of maize seeds germination, the hydrochar produced with phosphoric acid promoted a better seedling growth. For this sample, the greatest relative percentage of benzene derivatives and phenolic compounds were associated to hormone-like effects, responsible for stimulating shoot and root elongation. The reactions parameters proved to be determinant for the organic composition of hydrochar, exerting a strict influence on molecular features and plant growth response.

Decolourization of textile effluent using native microbial consortium enriched from textile industry effluent

A robust and efficient treatment process is required to address the problem of residual colour and avoid expensive post-treatment steps while dealing with textile effluents. In the present work, a novel microbial consortium enriched from textile effluent was used to optimize the process of decolourization under extreme conditions with minimum inputs. With PreTreatment Range (PTR) effluent as a carbon source and only 0.5 g/L yeast extract as external input, the process enabled 70-73% colour reduction (from 1910-1930 to 516-555 hazen) in dyeing unit wastewater. Unhindered performance at higher temperatures (30 °C-50 °C) and wide pH range (7-12) makes this process highly suitable for the treatment of warm and extremely alkaline textile effluents. No significant difference was observed in the decolourization efficiency for effluents from different batches (Colour: 1647-4307 hazen; pH-11.5-12.0) despite wide variation in nature and concentration of dyes employed. Long term (60 days) continuous mode performance monitoring at hydraulic retention time of 48 h in lab-scale bioreactor showed consistent colour (from 1734-1980 to 545-723 hazen) and chemical oxygen demand (1720-2170 to 669-844 mg/L) removal and consistently neutral pH of the treated water. Present study thus makes a significant contribution by uncovering the ability of native microbial consortium to reliably treat dye laden textile wastewater without any dilution or pre-treatment and with minimum external inputs. The results ensure easy applicability of this indigenously developed process at the industrial scale.

Phytotoxicity indexes and removal of color, COD, phenols and ISA from pulp and paper mill wastewater post-treated by UV/H2O2 and photo-Fenton

Pulp and paper mill wastewater (PPMWW) contains high concentrations of recalcitrant compounds that cause toxicity to organisms. Advanced oxidation processes (AOPs) have the ability to degrade these compounds and reduce overall toxicity. Physicochemical characterization and Lactuca sativa toxicity test were conducted to compare the effectiveness of two post-treatments: UV/H₂O₂ and photo-Fenton. A comparison of four phytotoxicity indexes was carried out. PPMWW from a Brazilian treatment plant was characterized by high values of phenols, color, integrated spectral area (ISA), and chemical oxygen demand (COD), and caused significant inhibition to seedling development. The use of both post-treatments allowed the removal of over 75% of phenols, color, ISA, and COD. Although UV/H₂O₂ was more effective in removing phenols and ISA, photo-Fenton better reduced phytotoxicity. The most sensitive phytotoxicity indexes were RGIC_0.8 and GIC_80%, whereas SGC₀, REC_-0.25 and REC_-0.50 better showed the effectiveness of the post-treatments. We suggest the combined use of two phytotoxicity indexes: one that evaluates the effects on seed germination and, another, on root elongation, e.g., SGC₀ and RGIC_0.8. Additionally, we recommend the use of ISA for monitoring programs of wastewater treatments because it is a cost-effective approach that allows narrowing down the search and identification of compounds present in complex mixtures.

Impact assessment of bioaugmented tannery effluent discharge on the microbiota of water bodies

Effluents are commonly discharged into water bodies, and in order for the process to be as environmentally sound as possible, the potential effects on native water communities must be assessed alongside the quality parameters of the effluents themselves. In the present work, changes in the bacterial diversity of streamwater receiving a tannery effluent were monitored by high-throughput MiSeq sequencing. Physico-chemical and microbiological parameters and acute toxicity were also evaluated through different bioassays. After the discharge of treated effluents that had been either naturally attenuated or bioaugmented, bacterial diversity decreased immediately in the streamwater samples, as evidenced by the over-representation of taxa such as Brachymonas, Arcobacter, Marinobacterium, Myroides, Paludibacter and Acinetobacter, typically found in tannery effluents. However, there were no remarkable changes in diversity over time (after 1 day). In terms of the physico-chemical and microbiological parameters analyzed, chemical oxygen demand and total bacterial count increased in response to discharge of the treated effluents. No lethal effects were observed in Lactuca sativa L. seeds or Rhinella arenarum embryos exposed to the streamwater that had received the treated effluents. All of these results contribute to the growing knowledge about the environmental safety of effluent discharge procedures.

Effect of leachate effluent from activated sludge and membrane bioreactor systems with acclimatized sludge on plant seed germination

This research comparatively investigates the effect of landfill leachate effluent of two biological treatment schemes on germination of Lactuca sativa and Vigna radiata. The treatment schemes are two-stage activated sludge (AS) and two-stage membrane bioreactor (MBR) systems with acclimatized seed sludge. The AS and MBR are operated under two concentrations of landfill leachate influent: moderate (condition 1) and elevated (condition 2). The results show that, under condition 1, the AS and MBR efficiently remove 80-96% of organic compounds and nutrients and 81-100% of harmful micropollutants. Under condition 2 with elevated influent concentration, MBR is more effective in biodegrading micropollutants than the AS system. The germination rate (GR) and germination seed index (GSI) of L. sativa and V. radiata germinated with AS and MBR effluent from condition 1 are 100% and 1.29-1.56. Under condition 2, the GR and GSI with AS effluent are reduced to 80% and 0.65-0.77, while those with MBR effluent are 100% and 1.27-1.38. Quantitative real-time polymerase chain reaction (qPCR) analysis indicates that the bacterial community in the MBR is more abundant than in the AS, especially ammonia oxidizing bacteria, Nitrobacter, and Nitrospira, which aid heterotrophic bacteria in biodegradation of micropollutants and promote the growth of heterotrophs. The bacterial abundance and community composition render the MBR scheme more operationally suitable for elevated landfill-leachate influent concentrations. By comparison, the MBR system is more effective in removal of micropollutants than the AS, as evidenced by higher GR and GSI. The technology also could potentially be applied to water reclamation. A lack of technological and financial resources in many developing countries nevertheless precludes the adoption of MBR despite higher pollutant removal efficiency. An alternative solution is the use of acclimatized seed sludge in AS system to enhance treatment efficiency, especially in influent with low concentrations of micropollutants. In addition, the seed germination results suggest the possibility of water reuse in agriculture.

Antifungal and Phytotoxic Activities of Essential Oils: In Vitro Assays and Their Potential Use in Crop Protection

(1) Background: The use of natural products based on essential oils (EO) is nowadays arousing great interest as an alternative method to control plant pathogens and weeds. However, EO possess low bioavailability and are highly volatile, and their encapsulation in hydroxypropyl-ß-cyclodextrin (HP-β-CD) could be a means to enhance their stability and maintain their bioactivity. Thus, the current study aims at investigating, in the presence and the absence of HP-β-CD, the antifungal and phytotoxic activities of nine EO, distilled from plant species belonging to Alliaceae, Apiaceae, and Cupressaceae families, with considerations for their chemical composition. (2) Methods: EO antifungal activity was assessed by direct contact and volatility assays against Fusarium culmorum, a major phytopathogenic fungi, while phytotoxic effects were evaluated against lettuce (Lactuca sativa L.) and rye-grass (Lolium perenne L.), by seedling’s emergence and growth assays. (3) Results: These EO inhibit fungal growth in both direct contact and volatility assays, with half-maximal inhibitory concentrations (IC50) ranging from 0.01 to 4.2 g L−1, and from 0.08 up to 25.6 g L−1, respectively. Concerning phytotoxicity, these EO have shown great potential in inhibiting lettuce (IC50 ranging from 0.0008 up to 0.3 g L−1) and rye-grass (IC50 ranging from 0.01 to 0.8 g L−1) seedlings’ emergence and growth. However, the EO encapsulation in HP-β-CD has not shown a significant improvement in EO biological properties in our experimental conditions. (4) Conclusion: All tested EO present antifungal and phytotoxic activities, with diverse efficacy regarding their chemical composition, whilst no increase of their biological effects was observed with HP-β-CD.

Sewage Sludge ZnCl2-Activated Carbon Intercalated MgFe-LDH Nanocomposites: Insight of the Sorption Mechanism of Improved Removal of Phenol from Water

Keywords: sludge-activated carbon; MgFe layered double hydroxide; nanocomposite materials; phenol aqueous uptake; mechanistic studies; reusability performance.

Phytoremediation processes of domestic and textile effluents: evaluation of the efficacy and toxicological effects in Lemna minor and Daphnia magna

Phytoremediation has been proposed as a potential biotechnological strategy to remediate effluents before their release into the environment. The use of common aquatic plant species, such as macrophytes (e.g., Lemna spp.) as a cleanup solution has been proposed decades ago. However, the effectiveness of such processes must be assessed by analyzing the toxicity of resulting effluents, for the monitoring of wastewater quality. To attain this purpose, this work intended to quantify the efficacy of a Lemna-based wastewater phytoremediation process, by analyzing toxicological effects of domestic and textile effluents. The toxic effects were measured in Lemna minor (same organisms used in the phytoremediation process, by quantifying toxicological endpoints such as root length, pigment content, and catalase activity) and by quantifying individual parameters of Daphnia magna (immobilization, reproduction, and behavior analysis). Phytoremediation process resulted in a decrease of chemical oxygen demand in both effluents and in an increase in root length of exposed plants. Moreover, textile effluent decreased pigments content and increased catalase activity, while domestic effluent increased the anthocyanin content of exposed plants. D. magna acute tests allowed calculating a EC₅₀ and Toxic Units interval of 53.82-66.89%/1.85-1.49, respectively, to raw textile effluent; however, it was not possible to calculate these parameters for raw and treated domestic effluent (RDE and TDE). Therefore, in general, the acute toxicity of effluent toward D. magna was null for RDE, and mild for the treated textile effluent (TTE), probably due to the effect of phytoremediation. Exposure to textile effluents (raw and treated) increased the total number of neonates of D. magna and, in general, both textile effluents decreased D. magna distance swim. Moreover, although both effluents were capable of causing morphological and physiological/biochemical alterations in L. minor plants, organisms of this species were able to survive in the presence of both effluents and to remediate them.

Development of a novel carboxamide-based off–on switch fluorescence sensor: Hg2+, Zn2+ and Cd2+

Here, the carboxamide ligand N-(thiazole-2-yl) picolinamide (L) was synthesized in an ionic liquid tetrabutylammonium bromide (TBAB) as the benign reaction medium.

Chemical Nature of Spent Coffee Grounds and Husks

Waste coffee husks and spent coffee grounds (SCGs) are produced in large qualities worldwide. Characterisation of these waste streams from Australian commercial outlets in terms of lipid, caffeine, and polyphenol content was undertaken giving values up to 10% lipids and 23mg g−1 phenols from SCGs, consistent with reports from other parts of the world. Husks generally gave lower values. Caffeine residues of 5 and 10mg g−1 (dry weight basis) were found in husks and SCGs respectively. Comparing air-dried and water-extracted solid SCGs and the resulting water extract in plant phytotoxicity studies indicated that pretreatment of the SCGs and plants exposed to the SCGs, are important factors when considering their use as a soil amendment.

Milli-channel array for direct and quick reading of root elongation bioassays

A novel platform to perform systematic analysis and direct reading of root elongation bioassays is presented. The device was designed to include multiplexed microenvironments for the germination and growth of individual seeds, which allows observation by the naked eye or by optical systems, notably cellphone cameras. Prototypes were fabricated by laser micromachining on a highly transparent material that is fully compatible with biological systems. The effectiveness of the milli-channel array was verified against the conventional system (Petri dish). Lactuca sativa was chosen as a model species and glyphosate as a typical toxic agent. All tests were run according to standardized procedures and data analysis was carried out through different statistical indicators such as the root elongation and germination indexes. Results attained in the milli-channel array were identical to those in Petri dish, with the remarkable benefit that several steps required in the conventional system were avoided, which enormously decreases the operation time and the possibility of experimental errors. Further advantages of the milli-channel array are also reported, such as the capability to achieve live imaging of plant organs growth through a simple experiment. The developed device has been proven to be effective, versatile, easy-to-use, and integrable to cellphones, which naturally provide facilities for data recording, analysis, and networking. These improvements open the route to novel applications of bioassays in the wide field of ecotoxicology and environmental studies.

Phytotoxicity, cytotoxicity and genotoxicity evaluation of organic and inorganic pollutants rich tannery wastewater from a Common Effluent Treatment Plant (CETP) in Unnao district, India using Vigna radiata and Allium cepa

The leather industry is a major source of environmental pollution in India. The wastewater generated by leather industries contains very high pollution parameters due to the presence of a complex mixture of organic and inorganic pollutants even after the treatment at a Common Effluent Treatment Plant (CETP) and disturbs the ecological flora and fauna. The nature, characteristics and toxicity of CETP treated wastewater is yet to be fully elucidated. Thus, this study aims to characterize and evaluate the toxicity of CETP treated tannery wastewater collected from the Unnao district of Uttar Pradesh, India. In addition to measuring the physico-chemical parameters, the residual organic pollutants was identified by GC-MS analysis and phytotoxicity, cytotoxicity and genotoxicity of the treated wastewater was evaluated using Vigna radiata L. and Allium cepa L. Results showed that the treated wastewater contained very high pollution parameters (TDS 3850 mg/L, BOD 680 mg/L, COD-1300 mg/L). GC-MS analysis revealed the presence of various types of residual organic pollutants including benzoic acid, 3-[4^,-(T-butyl) Phenyl] furan-2-5-dione, benzeneacetamide, resorcinol, dibutyl phthalate, and benzene-1,2,4-triol. Further, toxicological studies showed the phytotoxic nature of the wastewater as it inhibited seed germination in V. radiata L. and root growth of A. cepa. Genotoxicity was evidenced in the root tip cell of A. cepa where chromosomal aberrations (stickiness, chromosome loss, C-mitosis, and vagrant chromosome) and nuclear abnormalities like micronucleated and binucleated cells were observed. Thus, results suggested that it is not safe to discharge these wastewater into the environment.

Laboratory and field microcosms as useful experimental systems to study the bioaugmentation treatment of tannery effluents

Tannery effluents require effective treatment prior to their final disposal, and the use of native bacterial consortia could be an appropriate strategy for this purpose. In the present work, consortium SFC 500-1 was found to be highly tolerant to different metals, metalloids and aromatic compounds like phenols. It was also able to remove the black dye commonly used in tanneries. Moreover, it promoted a significant reduction in chemical oxygen demand and exhibited high capability for the simultaneous removal of Cr(VI) and phenol. However, the effectiveness of the remediation processes markedly varied from one experimental system (Erlenmeyer flasks) to another (field microcosm system), highlighting the importance of moving from a small-scale study system to one involving more realistic environmental scenarios. In addition, we found a decrease in the toxicity of the effluent treated with consortium SFC 500-1. Taken together, our results indicate that this consortium possesses great potential for the treatment of tannery effluents. We conclude that for the development of a bioremediation strategy, it is necessary to develop experiments at a larger scale under conditions similar to those of the original system, in order to complete the scenario first created by in vitro approaches.

High phenol degradation capacity of a newly characterized Acinetobacter sp. SA01: Bacterial cell viability and membrane impairment in respect to the phenol toxicity

An efficient phenol-degrading bacterial strain, belonging to Acinetobacter genus, was isolated and selected to study the impact of different environmentally relevant phenol concentrations on the degradation process. The bacterial isolate, labeled as Acinetobacter sp. SA01 was able to degrade the maximum phenol concentration of 1 g/l during 60 h at optimum condition of pH 7, 30 °C and 180 rpm. Aeration and initial cell density, the two important factors, were carefully examined in the optimal growth conditions. The results showed that these two variables related proportionally with phenol degradation rate. Further investigations showed no effect of inoculum size on the enhancement of degradation of phenol at over 1 g/l. Flow cytometry (FCM) study was performed to find out the relationship between phenol-induced damages and phenol degradation process. Single staining using propidium iodide (PI) showed increased cell membrane permeability with an increase of phenol concentration, while single staining with carboxyfluorescein diacetate (cFDA) demonstrated a considerable reduction in esterase activity of the cells treated with phenol at more than 1 g/l. A detailed investigation of cellular viability using concurrent double staining of cFDA/PI revealed that the cell death increases in cells exposed to phenol at more than 1 g/l. The rate of cell death was low but noticeable in the presence of phenol concentration of 2 g/l, over time. Phenol at concentrations of 3 and 4 g/l caused strong toxicity in living cells of Acinetobacter sp. SA01. The plate count method and microscopy analysis of the cells treated with phenol at 1.5 and 2 g/l confirmed an apparent reduction in cell number over time. It was assumed that the phenol concentrations higher than 1 g/l have destructive effects on membrane integrity of Acinetobacter sp. SA01. Our results also revealed that the toxicity did not reduce by increasing initial cell density. Scanning electron microscopy (SEM) examination of bacterial cells revealed the surface morphological changes following exposure to phenol. The bacterial cells, with wizened appearance and wrinkled surface, were observed by exposing to phenol (1 g/l) at lag phase. A morphological change occurred in the mid-logarithmic phase as the bacterial cells demonstrated coccobacilli form as well as elongated filamentous shape. The wrinkled cell surface were totally disappeared in mid-stationary phase, suggesting that the complete degradation of phenol relieve the stress and direct bacterial cells toward possessing smoother cell membrane.

Salicylic acid loaded chitosan microparticles applied to lettuce seedlings: Recycling shrimp fishing industry waste

Shrimp fishing industry wastes are still a main problem with high environmental impact worldwide. In this study, chitosan with ultra-high molecular weight and deacetylation degree ≥85% was obtained from shrimp fishing industry waste from Argentinean Patagonia. Chitosan based microparticles capable to entrap salicylic acid, a phytohormone known to play major role in the regulation of plant defense response against various pathogens, were prepared using TPP as crosslinker. Unloaded microparticles and microparticles loading several salicylic acid amount were fully characterized exhibiting a size between 1.57 μm and 2.45 μm. Furthermore, a good PDI, entrappment efficiencies from 59% to 98% and salicylic acid sustained release over 24 h were achieved. Chitosan based microparticles were non toxic in most of the doses applied in lettuce seedlings. Instead, microparticles can positively modulate plant growth and have the potential to improve plant defense responses. In particular salicylic acid loaded microparticles effect was very promising for its application as activators of salicylic acid dependent plant defense responses in lettuce as a model of horticultural plant species.

A test battery for assessing the ecotoxic effects of textile dyes

The textile dyeing industry is one of the main sectors contributing to environmental pollution, due to the generation of large amounts of wastewater loaded with dyes (ca. 2-50% of the initial amount of dyes used in the dye baths is lost), causing severe impacts on human health and the environment. In this context, an ecotoxicity testing battery was used to assess the acute toxicity and genotoxicity of the textile dyes Direct Black 38 (DB38; azo dye) and Reactive Blue 15 (RB15; copper phthalocyanine dye) on different trophic levels. Thus these dyes were tested using the following assays: Filter paper contact test with earthworms (Eisenia foetida); seed germination and root elongation toxicity test (Cucumis sativus, Lactuca sativa and Lycopersicon esculentum); acute immobilization test (Daphnia magna and Artemia salina); and the Comet assay with the rainbow trout gonad-2 cell fish line (RTG-2) and D. magna. Neither phytotoxicity nor significant effects on the survival of E. foetida were observed after exposure to DB38 and RB15. Both dyes were classified as relatively non-toxic to D. magna (LC₅₀ > 100 mg/L), but DB38 was moderately toxic to A. salina with a LC₅₀ of 20.7 mg/L. DB38 and RB15 induced significant effects on the DNA of D. magna but only DB38 caused direct (alkaline comet assay) and oxidative (hOGG1-modified alkaline comet assay) damage to RTG-2 cells in hormetic responses. Therefore, the present results emphasize that a test battery approach of bioassays representing multiple trophic levels is fundamental in predicting the toxicity of textile dyes, aside from providing the information required to define their safe levels for living organisms in the environment.