Confident performance of chitosan and pistachio shell biochar on reducing Ni bioavailability in soil and plant plus improved the soil enzymatic activities, antioxidant defense system and nutritional quality of lettuce

Individual and combinatorial application of nanosilica and carbon nanoparticles alleviate nickel stress in barley (Hordeum vulgare L.): Impacts on gene expression, AsA - GSH cycle, cellular fractionation, and proline metabolism

Nanotechnology is grabbing great attention all over the world because of its stimulating use in numerous fields, and the nanosilica (nSi) and carbon nanoparticles (CNPs) application has been examined in various studies. Conversely, the nSi and CNPs combinatorial use is a new method and researched in limited literature. A pot experiment was carried out for examining different growth and biochemical parameters in barley (Hordeum vulgare L.) against the nickel (Ni) at 200 mg kg-1 (toxic concentration), primed with the combinatorial use of nSi at 3 mM and CNPs at 200 μM. It was observed that in soil, Ni toxicity significantly (P < 0.05) reduced plant growth, photosynthetic pigments, nutrient and affects oxidative stress and antioxidants response, gene expression, cellular fractionation, AsA-GSH cycle, proline metabolism, organic acids, and Ni absorption in H. vulgare. However, the nSi and CNPs application significantly (P < 0.05) increased plant development and biomass, photosynthetic attributes, enzymatic and non-enzymatic antioxidants, their gene regulation, and reduced oxidative toxicity and Ni uptake. The nSi and CNPs combinatorial use was found to be more successful in improving these parameters in comparison with individual treatments. These findings unlocked new understandings for viable agricultural applications and hold deal in directing challenges of heavy metal pollution in cultivating lands.

Alternansucrase as a key enabling tool of biotransformation from molecular features to applications: A review

Alternansucrase (ASR), classified in GH70, produces unique α-glucans with alternating α-1,3 and α-1,6 glycosidic linkages in the backbone chain from renewable sucrose which is easily obtained from nature with low cost. ASR has synthesized many products with valuable functionalities that hold enormous commercial interest and promising applications. The influence of biocatalysis and fermentation parameters on the yields, and properties of products are critical for the propositions made to promote the enzyme application. Investigations on ASR have been compiled in the review to provide information on the enzyme, products and parameters. This review summarizes studies on the characteristics, conversion mechanism, products, and beneficial applications of ASR and exhibits structure-based technologies to improve enzyme activity, specificity, and thermostability for industrial applications. Finally, prospects for further development are also proposed for various ASR applications in food and other fields.

Impact of cement waste on soil fertility and crop productivity: a serious concern for food security

The rapid expansion of urbanization and construction activities has led to a significant increase in cement production worldwide, resulting in a surge in cement waste generation. This study aims to provide a comprehensive analysis of the repercussions of cement waste on soil fertility and crop productivity, emphasizing its critical implications for global food security. Through a multidisciplinary approach, encompassing field surveys, laboratory experiments, and statistical modeling, we assess the physicochemical alterations induced by cement waste in agricultural soils. Our findings reveal substantial declines in crucial soil parameters, including pH levels, organic matter content, and nutrient availability, which directly translate into diminished crop yields. Furthermore, the study identifies key mechanisms underlying these detrimental effects, including altered microbial communities and disrupted nutrient cycling processes. In addition, the findings underscore the severity of the issue, revealing substantial declines in soil fertility and crop yields in areas affected by cement waste contamination. Additionally, we discuss potential mitigation strategies and policy interventions aimed at mitigating the adverse effects of cement waste on agricultural systems. By quantifying the extent of soil degradation and crop yield reduction attributed to cement waste, this research underscores the urgency for sustainable waste management practices and highlights the need for policy interventions to safeguard agricultural productivity and ensure global food security in the face of escalating urbanization and construction activities.

Exploring bacterial community assembly in vadose and saturated zone soil for tailored bioremediation of a long-term hydrocarbon-contaminated site

Indigenous soil microbial communities play a pivotal role in the in situ bioremediation of contaminated sites. However, research on the distribution characteristics of microbial communities at various soil depths remains limited. In particular, there is little information on the assembly of microbial communities, especially those with degradation potential, in the vadose and saturated zones of hydrocarbon-contaminated sites. In this study, 18 soil samples were collected from the vadose zone and saturated zone at a long-term hydrocarbon-contaminated site. The diversity, composition, and driving factors of assembly of the soil bacterial community were determined by high-throughput sequencing analysis. Species richness and diversity were significantly higher in the vadose zone soils than in the saturated zone soils. Significant differences in abundance at both the phylum and genus levels were observed between the two zones. Soil bacterial community assembly was driven by the combination of pollution stress and nutrients in the vadose zone but by nutrient limitations in the saturated zone. The abundance of dechlorinating bacteria was greater in the saturated zone soils than in the vadose zone soils. Compared with contaminant concentrations, nutrient levels had a more pronounced impact on the abundance of dechlorinating bacteria. In addition, the interactions among dechlorinating bacterial populations were stronger in the saturated zone soils than in the vadose zone soils. These findings underscore the importance of comprehensively understanding indigenous microbial communities, especially those with degradation potential, across different soil layers to devise specific, effective in situ bioremediation strategies for contaminated sites.

Recent advances of application of bentonite-based composites in the environmental remediation

Bentonite-based composites have been widely utilized in the removal of various pollutants due to low cost, environmentally friendly, ease-to-operate, whereas the recent advances concerning the application of bentonite-based composites in environmental remediation were not available. Herein, the modification (i.e., acid/alkaline washing, thermal treatment and hybrids) of bentonite was firstly reviewed; Then the recent advances of adsorption of environmental concomitants (e.g., organic (dyes, microplastics, phenolic and other organics) and inorganic pollutants (heavy metals, radionuclides and other inorganic pollutants)) on various bentonite-based composites were summarized in details. Meanwhile, the effect of environmental factors and interaction mechanism between bentonite-based composites and contaminants were also investigated. Finally, the conclusions and prospective of bentonite-based composites in the environmental remediation were proposed. It is demonstrated that various bentonite-based composites exhibited the high adsorption/degradation capacity towards environmental pollutants under the specific conditions. The interaction mechanism involved the mineralization, physical/chemical adsorption, co-precipitation and complexation. This review highlights the effect of different functionalization of bentonite-based composites on their adsorption capacity and interaction mechanism, which is expected to be helpful to environmental scientists for applying bentonite-based composites into practical environmental remediation.

Effects of combined microplastics and heavy metals pollution on terrestrial plants and rhizosphere environment: A review

Microplastics (MPs) can enter the soil environment through industry, agricultural production and daily life sources. Their interaction with heavy metals (HMs) poses a significant threat to a variety of terrestrial ecosystems, including agricultural ones, thereby affecting crop quality and threatening human health. This review initially addresses the impact of single and combined contamination with MPs and HMs on soil environment, including changes in soil physicochemical properties, microbial community structure and diversity, fertility, enzyme activity and resistance genes, as well as alterations in heavy metal speciation. The article further explores the effects of this pollution on the growth characteristics of terrestrial plants, such as plant biomass, antioxidant systems, metabolites and photosynthesis. In general, the combined contaminants tend to significantly affect soil environment and terrestrial plant growth, i.e., the impact of combined contaminants on plants weight ranged from -87.5% to 4.55%. Similarities and differences in contamination impact levels stem from the variations in contaminant types, sizes and doses of contaminants and the specific plant growth environments. In addition, MPs can not only infiltrate plants directly, but also significantly affect the accumulation of HMs in terrestrial plants. The heavy metals concentration in plants under the treatment of MPs were 70.26%-36.80%. The co-occurrence of these two pollution types can pose a serious threat to crop productivity and safety. Finally, this study proposes suggestions for future research aiming to address current gaps in knowledge, raises awareness about the impact of combined MPs + HMs pollution on plant growth and eco-environmental security.

Synthesis, antimicrobial activity, antioxidant activity and molecular docking of novel chitosan derivatives containing glycine Schiff bases as potential succinate dehydrogenase inhibitors

Succinate dehydrogenase (SDH) is an important inner mitochondrial membrane-bound enzyme involved in redox reactions during the tricarboxylic acid cycle. Therefore, a series of novel chitosan derivatives were designed and synthesized as potential microbicides targeting SDH and precisely characterized by FTIR, 1H NMR and SEM. Their antifungal and antibacterial activities were evaluated against Botrytis cinerea, Fusarium graminearum, Staphylococcus aureus and Escherichia coli. The bioassays revealed that these chitosan derivatives exerted significant antifungal effects, with four of the compounds achieving 100 % inhibition of Fusarium graminearum merely at a concentration of 0.5 mg/mL. Additionally, CSGDCH showed 79.34 % inhibition of Botrytis cinerea at a concentration of 0.1 mg/mL. In vitro antibacterial tests revealed that CSGDCH and CSGDBH have excellent Staphylococcus aureus and Escherichia coli inhibition with MICs of 0.0156 mg/mL and 0.03125 mg/mL, respectively. Molecular docking studies have been carried out to explore the binding energy and binding mode of chitosan and chitosan derivatives with SDH. The analyses indicated that chitosan derivatives targeted the active site of the SDH protein more precisely, disrupting its normal function and ultimately repressing the growth of microbial cells. Furthermore, the chitosan derivatives were also evaluated biologically for antioxidation, and all of these compounds had a greater degree of reducing power, superoxide radical, hydroxyl radical and DPPH-radical scavenging activity than chitosan. This research has the potential for the development of agricultural antimicrobial agents.

Combined effect of endophytic Bacillus mycoides and rock phosphate on the amelioration of heavy metal stress in wheat plants

BACKGROUND

Zinc (Zn) and nickel (Ni) are nutrients that are crucial for plant growth; however, when they are present at higher concentrations, they can cause toxicity in plants. The present study aimed to isolate plant growth promoting endophytic bacteria from Viburnum grandiflorum and assess its plant and defense promoting potential alone and in combination with RP in zinc (Zn) and nickel (Ni) toxic soil. The isolated endophytic bacteria were identified using 16s rRNA gene sequencing. For the experiment, twelve different treatments were applied using Zn, Ni, isolated endophytic Bacillus mycoides (Accession # MW979613), and rock phosphate (RP). The Ni, Zn and RP were used at the rate of (100 mg/kg) and (0.2 g/kg) respectively. A pot experiment with three replicates of each treatment was conducted using a complete randomized design (CRD).

RESULTS

The results indicated that Ni (T5 = seed + 100 mg/kg Ni and T9 = seed + 100 mg/kg Zn) and Zn concentrations inhibited plant growth, but the intensity of growth inhibition was higher in Ni-contaminated soil. Bacillus mycoides and RP at 100 mg/Kg Zn (T12 = inoculated seed + 100 mg/kg Zn + RP0.2 g/kg.) increased the shoot length, leaf width, protein and sugar content by 57%, 13%, 20% and 34%, respectively, compared to the control. The antioxidant enzymes superoxide dismutases (SOD), peroxidase (POD) were decreased in contaminated soil. Furthermore, Ni and Zn accumulation was inhibited in T11 (seed + 100 mg/kg Zn + RP0.2 g/Kg) and T12 (inoculated seed + 100 mg/kg Zn + RP0.2 g/Kg) by 62 and 63% respectively. The Cu, Ca, and K, contents increased by 128, 219 and 85, Mn, Na, and K by 326, 449, and 84% in (T3 = inoculated seed) and (T4 = inoculated seed + RP 0.2 g/Kg) respectively.

CONCLUSIONS

Ni was more toxic to plants than Zn, but endophytic bacteria isolated from Viburnum grandiflorum, helped wheat (Triticum aestivum) plants and reduced the toxic effects of Ni and Zn. The effect of Bacillus mycoides was more prominent in combination with RP which promoted and suppressed heavy-metal toxicity. The reported combination of Bacillus mycoides and RP may be useful for improving plant growth and overcoming metal stress.

Combined passivators regulate physiological, antioxidant potential and metals accumulation in potato grown in metals contaminated soil

To solve the problem of excessive heavy metals in farmland soil, there is a dire need for research effort to screen for the soil passivator materials. This study aimed to develop a practical novel approach for improving the potato growth and remedial effectiveness of the metals by optimal combination and dosage of various passivators. Experimental treatments were comprised of various levels of passivating agents (sepiolite, quicklime and calcium magnesium phosphate) in individual and combined form. Results showed that application of passivating agents significantly enhanced growth by optimizing photosynthetic attributes, enzymatic antioxidants, and soil health. Balanced application of passivators effectively reduce the bioavailability of metals, curbing their uptake by potato plants. Sole application of all the agents results statistically similar outcomes as compared with combined form. Additionally, passivators indirectly enhance the activity of essential antioxidant enzymes. Synergistic effect of all the agents significantly improved the tuber quality by decreasing the accumulation of proline, malondialdehyde content, and bioaccumulation of Cu, Pb, Cd, and As in potato parts. In crux, combined usage of passivating agents proved to be of better growth, improvement in antioxidative defense system, and better quality of potato. By mitigating heavy metal contamination, passivators not only enhance crop quality and yield but also ensure heavy metal-free potatoes that meet stringent food safety standards.

Granular bacterial inoculant alters the rhizosphere microbiome and soil aggregate fractionation to affect phosphorus fractions and maize growth

The constraint of phosphorus (P) fixation on crop production in alkaline calcareous soils can be alleviated by applying bioinoculants. However, the impact of bacterial inoculants on this process remains inadequately understood. Here, a field study was conducted to investigate the effect of a high-concentration, cost-effective, and slow-release granular bacterial inoculant (GBI) on maize (Zea mays L.) plant growth. Additionally, we explored the effects of GBI on rhizosphere soil aggregate physicochemical properties, rhizosphere soil P fraction, and microbial communities within aggregates. The outcomes showed a considerable improvement in plant growth and P uptake upon application of the GBI. The application of GBI significantly enhanced the AP, phoD gene abundance, alkaline phosphatase activity, inorganic P fractions, and organic P fractions in large macroaggregates. Furthermore, GBI impacted soil aggregate fractionation, leading to substantial alterations in the composition of fungal and bacterial communities. Notably, key microbial taxa involved in P-cycling, such as Saccharimonadales and Mortierella, exhibited enrichment in the rhizosphere soil of plants treated with GBI. Overall, our study provides valuable insight into the impact of GBI application on microbial distributions and P fractions within aggregates of alkaline calcareous soils, crucial for fostering healthy root development and optimal crop growth potential. Subsequent research endeavors should delve into exploring the effects of diverse GBIs and specific aggregate types on P fraction and community composition across various soil profiles.

Characterizing the spatio-temporal distribution, detection, and prediction of aerosol atmospheric rivers on a global scale

Aerosol Atmospheric Rivers (AARs) are elongated and narrow regions that carry high concentrations of aerosols (tiny particles suspended in the atmosphere) across large distances, exerting effects on both air quality and human health (Chakraborty et al., 2021, 2022). Monitoring and modeling these aerosols present distinct challenges due to their dynamic nature and complex interactions within the atmosphere. In this context, the present study detects and predicts the AARs using MERRA-2 reanalysis datasets with their seasonal climatology of key aerosol species, including Black Carbon (BC), Dust (DU), Organic Carbon (OC), Sea Salt (SS), and Sulphates (SU). The study employs an innovative Integrated Aerosol Transport (IAT) based AAR algorithm from 2015 to 2022. A total count of 44,020 BC AARs, 13,280 DU AARs, 21,599 OC AARs, 17,925 SS AARs, and 31,437 SU AARs were detected globally. The seasonal climatology of BC and OC AARs intensifies in areas such as the Amazon rainforest and Congo during AMJJAS (April-September) due to forest fires. Similarly, DU AARs are more frequent in regions near the Saharan desert, primarily around the equator during AMJJAS. SS AARs tend to predominate over the oceans, while SU AARs are predominantly found in the northern hemisphere, primarily due to higher anthropogenic emissions. Furthermore, convolutional autoencoder-based models were developed for key aerosol species, strengthening predictive accuracy by effectively capturing complex data relationships and delivering precise predictions for the last 5-time frames. During validation, the model evaluation parameters for image prediction such as the Structural Similarity Index ranged from 0.86 to 0.94, Peak Signal-to-Noise Ratio fluctuated between 1.14 and 42.25 dB, Root Mean Square Error varied from 2.39 to 296.4 mg/(m-sec), and Mean Square Error fell within the range of 1.55-17.22 mg/(m-sec). These collectively reflect image closeness, quality, dissimilarity, and accuracy in AAR prediction. This study demonstrates the effectiveness of advanced machine and deep learning models in predicting AARs, offering the potential for advanced forecasting and enhancing resilience in high-aerosol concentration regions.

Soil rare microorganisms mediated the plant cadmium uptake: The central role of protists

Plants and microorganisms symbiotically mediate and/or catalyse the turnover of elements in rhizosphere soils, thus directly influencing the effectiveness of phytoremediation in addressing heavy metal contamination. Soil rare microbial communities are diverse but not well understood in terms of their importance for phytoremediation. In this study, we simulated the loss of rare microorganisms through dilution-to-extinction approach, and investigated the effects on integrated rhizosphere microbiome with soil microcosm experiments, including bacteria, fungi, protists, and microfauna. Additionally, we explored the implications for ryegrass (Lolium multiflorum Lam.) growth and its uptake of Cd (cadmium). Compared with the undiluted group, ryegrass exhibited a significant decrease in Cd uptake ranging from 52.34 % to 73.71 % in the rare species-loss soils, indicating a lack of functional redundancy in rhizosphere soil microbial community following rare species loss. Interestingly, these soils displayed a remarkable 1.79-fold increase in plant biomass and a 41.02 % increase in plant height. By sequencing the 16S, 18S, and ITS rRNA gene amplicons of rhizosphere microbes, we found that soil rare species loss decreased the rhizosphere microbial α-diversity, changed the community structures, and shifted the functional potential. Protists were particularly affected. Through the analysis of species co-occurrence networks, along with the partial least squares path modeling, we found that the diversity of protists and bacteria and the co-occurring network connectivity of protists and fungi contributed most to plant Cd uptake and growth. These results highlighted the potential significance of rare microorganisms, particularly protists, in phytoextraction of Cd-contaminated soils, owing to their central role in the microbial food web.

Studying the evolutions, differences, and water security impacts of water demands under shared socioeconomic pathways: A SEMs-bootstrap-ANN approach applied to Sichuan Province

In this study, a SEMs-bootstrap-ANN method was presented for constructing prediction intervals (PIs) of water demand under shared socioeconomic pathways (SSPs). The primary objective was to examine the evolution, disparities, and impacts on water security. Initially, a bootstrap algorithm and an artificial neural network (ANN) were combined to form a bootstrap-ANN model, which determined the centres and widths of the PIs at a specified significance level by estimating the distributions of prediction values and errors. The water demand factors in SSPs were projected using socioeconomic models like Cobb-Douglas, based on the narratives of the International Institute for Applied Systems Analysis (IIASA). By incorporating these factors into the bootstrap-ANN model, the study obtained the temporal changes of water demand PIs in SSPs, while quantifying the differences and water security implications using the interval difference index (IDI) and surface water exploration index (SWEI). The case study focused on Sichuan province, and the model performance was evaluated via the evaluation indices and cross-validation. The results demonstrated five key findings. Firstly, the proposed method showed a greater PICP of 0.985, slightly larger PIRAW of 9.83%, and higher MAIS than other methods in the historical dataset, indicating a small disadvantage in width in return for better accuracy and overall performance. Secondly, the reliability of the results in the SSP period was supported by the PIRAWs (mostly within 15%), the cross errors (approximately 5%), and their performance in 2021 (the PIs in SSP2 almost covered all true values). Thirdly, the total water demands in all SSPs within Sichuan Province exhibited a consistent upward trajectory, with SSP5 displaying the highest increase of 44-63% compared to current water usage. Fourthly, among the four SSPs, the most substantial disparities were observed between SSP5 and SSP3, reaching a maximum difference of 32%. Conversely, the disparities between SSP2 and SSP1 fluctuated around zero, transitioning from negative to positive trends. Notably, from an environmental perspective, SSP1 was considered preferable to SSP2. Lastly, the SWEIs, which reflected water security conditions in Sichuan Province under the four SSPs, ranked in the following order: SSP3, SSP1, SSP2, and SSP5, indicating a progressively worsening situation. Despite not reaching stress thresholds even during dry years until 2100, the water security conditions could deteriorate by 28-46% compared to historical extremes and by 3-16% compared to extended extremes in dry years.

Unraveling the driving factors of the plastic waste trade network formation and dynamics

International trade of plastic waste promotes the global plastic circular economy and improves resource efficiency, but exacerbates the ubiquitous plastic pollution. Understanding the drivers behind the evolution of the global plastic waste trade network (GPWTN) is pivotal for developing new international instruments to end plastic pollution and fostering clean solid-waste trade. Employing social network analysis (SNA) and quadratic assignment procedure (QAP) model, this study structures the GPWTN using bilateral trade data, revealing shifts from highly centralized to cross-layered networks and relevant drivers. It is suggested that Malaysia and Turkey has become the new key recipients of the GPWTN, replacing China, accompanied by the launch of new environmental regulations in some countries. Transportation cost is the most critical factor for the formation of the GPWTN, followed by gaps in resource demand, bio-based resource availability, and transportation accessibility. Trading partners in closer proximity, especially those with contiguous borders, are more likely to trade in waste plastics, while coastal countries play an important role in these partnerships. Economies with more abundant biomaterials, higher incomes, and greater environmental burdens are more likely to be exporters, while economies with scarcer resources and more compelling demands are more likely to import plastic waste. Countries involved in the trade in plastic waste, as either importers or exporters, receive varying degrees of economic benefits but bear potential environmental impacts. Therefore, global plastic pollution control and trade prosperity necessitates necessitate coordinated endeavors from nations and intergovernmental bodies for a mutually advantageous denouement.

Combined use of positive matrix factorization and 13C15N stable isotopes to trace organic matter-bound potential toxic metals in the urban mangrove sediments

Coastal sediments act as sinks of sediment organic matter (SOM) and metals because of their special land-sea location and depositional properties. However, there are few reports on the correlation between the sources of organic matter (OM) and associated potential toxic metals (PTMs). In this study, we combined CN stable isotope analysis and positive matrix factorization to identify the matter and metal sources of OM and glomalin-related soil protein (GRSP) in an estuary under several decades of urbanization. The results of the positive matrix factorization (PMF) reveal a correlation between the sources of total sediment metals and the sources of OM-related metals. The sources of both SOM-bound PTMs and GRSP-bound PTMs are significantly related to the sources of total PTMs. OM sources were elucidated through 13C-15 N stable isotopes, and the potential sources of different types of OM differed. In addition, there is a significant correlation between OM-associated PTMs and organic matter sources. Interestingly, the functional groups of SOM were mainly influenced by multiple PTM sources but no OM source, while the functional groups of GRSP were regulated by a single metal source and OM source. This study deepened the understanding of the coupling between PTMs and SOM. The possibility of combined use of positive matrix factorization and 13C-15 N stable isotope tracing of metals as well as the sources of each metal fractions has been evaluated, which will provide new insights for the transportation of PTMs.

Efficient and safe use of a slow-release Mn material for three sequential crops of rice in Cd-contaminated paddy soils

Traditional passivators reduce the effectiveness of Cd by ion exchange, chemisorption, and complexation in soil. However, traditional passivators have defects such as easy aging and poor durability, which not only reduce the treatment efficiency but also increase the risk of primary soil environmental pollution. For this reason, considering that Mn and Cd have physiological antagonism in rice, sepiolite-supported manganese ferrite (SMF) was prepared in this study to improve passivation persistence. The passivation mechanism, effect and duration of SMF were explored. The results showed that SMF has a dense and small pore structure and that the surface is rough, which provides abundant adsorption sites for Cd2+ adsorption. When the SMF adsorbs Cd2+, ions or functional groups in the material, such as MnOOH*, will exchange with Cd2+ to form Cd(OH)2 and other internal complexes. Indoor pure soil cultivation experiments showed that 0.1 % SMF can reduce the effective Cd content of soil by 41.32 %, demonstrating the efficiency of SMF. The three-crop rice experiments in pots showed that SMF could increase soil pH and continuously increase the content of available Mn in soil. Increasing the content of available Mn reduces the ability of rice to absorb Cd. In addition, the three-cropping rice experiments also indicated that the passivation effect of SMF materials on Cd-contaminated paddy fields was long-lasting and stable and that SMF is a more efficient and safe Cd passivation agent.

Abiogenic silicon: Interaction with potentially toxic elements and its ecological significance in soil and plant systems

Abiogenic silicon (Si), though deemed a quasi-nutrient, remains largely inaccessible to plants due to its prevalence within mineral ores. Nevertheless, the influence of Si extends across a spectrum of pivotal plant processes. Si emerges as a versatile boon for plants, conferring a plethora of advantages. Notably, it engenders substantial enhancements in biomass, yield, and overall plant developmental attributes. Beyond these effects, Si augments the activities of vital antioxidant enzymes, encompassing glutathione (GSH), catalase (CAT), superoxide dismutase (SOD), and peroxidase (POD), among others. It achieves through the augmentation of reactive oxygen species (ROS) scavenging gene expression, thus curbing the injurious impact of free radicals. In addition to its effects on plants, Si profoundly ameliorates soil health indicators. Si tangibly enhances soil vitality by elevating soil pH and fostering microbial community proliferation. Furthermore, it exerts inhibitory control over ions that could inflict harm upon delicate plant cells. During interactions within the soil matrix, Si readily forms complexes with potentially toxic metals (PTEs), encapsulating them through Si-PTEs interactions, precipitative mechanisms, and integration within colloidal Si and mineral strata. The amalgamation of Si with other soil amendments, such as biochar, nanoparticles, zeolites, and composts, extends its capacity to thwart PTEs. This synergistic approach enhances soil organic matter content and bolsters overall soil quality parameters. The utilization of Si-based fertilizers and nanomaterials holds promise for further increasing food production and fortifying global food security. Besides, gaps in our scientific discourse persist concerning Si speciation and fractionation within soils, as well as its intricate interplay with PTEs. Nonetheless, future investigations must delve into the precise functions of abiogenic Si within the physiological and biochemical realms of both soil and plants, especially at the critical juncture of the soil-plant interface. This review seeks to comprehensively address the multifaceted roles of Si in plant and soil systems during interactions with PTEs.

Advanced time-lagged effects of drought on global vegetation growth and its social risk in the 21st century

Extensive studies have demonstrated the restricting effect of past and present drought conditions on vegetation growth over the past three decades. However, the underlying mechanism of the impact of prior drought on vegetation growth - along with the magnitude of its impact over the rest of the 21st century - remains uncertain. Herein, we examined the evolution and characteristics of global vegetation growth and drought for both baseline (1982-2014) and future (2015-2100) periods under four representative pathways using the gross primary productivity (GPP) and the Standardized Precipitation Evapotranspiration Index from the CMIP6. Further, we investigated the time-lagged effects of drought on vegetation growth and the intensity of population and economy exposure to drought by identifying drought-threatened areas under four emission scenarios. The results show that, at the end of the 21st century, the global terrestrial GPP will experience an increasing trend under four scenarios, especially in SSP5-8.5, with a growth rate of 0.032 kg C m-2/decade, which is 10 times higher than that in SSP1-2.6. From the SSP1-2.6 to the SSP5-8.5 scenario, the SPEI change rates are -0.03, -0.01, -0.017, and -0.018/decade, respectively, indicating that the intensity of global drought events will rise with increases in CO2 emissions. 28.3%, 24.7%, 30.4%, and 35% of global land exhibit downward mean time-lagged months in four scenarios, especially in the middle-high latitudes of the northern hemisphere (>45°N), indicating an advanced response of vegetation to drought. Nearly 8, 9.1, 12.9, and 11.5 billion people - valued at 94,138 (SSP1-2.6), 976,020 (SSP2-4.5), 526,595 (SSP3-7.0), and 204,728 (SSP5-8.5) billion US$, respectively - will be threatened by continuous drought. Globally, the population and economy exposure to moderate and extreme drought zones is larger, and the economic risk from extreme droughts is 8 times greater under the high emissions scenario than the low emissions scenario.

Under flooding conditions, controlled-release fertiliser coated microplastics affect the growth and accumulation of cadmium in rice by increasing the fluidity of cadmium and interfering with metabolic pathways

The combined pollution of microplastics (MPs) and Cd can affect plant growth and development and Cd accumulation, with most studies focusing on dryland soil. However, the effects of polyurethane (PU) controlled-release fertiliser coated MPs (PU MPs), which widely exist in rice systems, coupled with Cd on plant growth and Cd accumulation under flooding conditions are still unknown. Therefore, in the present study, in situ techniques were used to systematically study the effects of PU MPs and Cd coupling on the physiological and biochemical performance, metabolomics characteristics, rhizosphere bacterial community, and Cd bioavailability of rice in different soil types (red soil/cinnamon soil). The results showed that the effects of PU MPs on rice growth and Cd accumulation were concentration-dependent, especially in red soil. High PU concentration (1 %) inhibited rice root growth significantly (44 %). The addition of PU MPs inhibited photosynthetically active radiation, net photosynthesis, and transpiration rate of rice, mainly with low concentration (0.1 %) in red soil and high concentration (1 %) in cinnamon soil. PU MPs can enhance the expression of Cd resistance genes (cadC and copA) in soil, enhance the mobility of Cd, and affect the metabolic pathways of metabolites in the rhizosphere soil (red soil: fatty acid metabolism; cinnamon soil: amino acid degradation, heterobiodegradation, and nucleotide metabolism) to promote Cd absorption in rice. Especially in red soil, Cd accumulation in the root and aboveground parts of rice after the addition of high concentration PU (1 %) was 1.7 times and 1.3 times, respectively, that of the control (p < 0.05). Simultaneously, microorganisms can affect rice growth and Cd bioavailability by affecting functional bacteria related to carbon, iron, sulfur, and manganese. The results of the present study provide novel insights into the potential effects of PU MPs coupled with Cd on plants, rhizosphere bacterial communities, and Cd bioavailability.

Mercapto-palygorskite efficiently immobilizes cadmium in alkaline soil and reduces its accumulation in wheat plants: A field study

Cadmium (Cd) contamination in wheat fields has become a major environmental issue in many regions of the world. Mercapto-palygorskite (MPAL) is a high-performance amendment that can effectively immobilize Cd in alkaline wheat soil. However, MAPL as an in-situ Cd immobilization strategy for alkaline wheat soil remains to be evaluated on a field-scale and the underlying mechanisms requires further evaluation. Here, MPAL were used as soil amendment to evaluate their immobilization efficiency on Cd-contaminated alkaline soil in the field experiments. The field experiments showed that MPAL application significantly reduced wheat grain Cd concentration from 0.183 mg/kg to 0.056 mg/kg, with Cd concentration in wheat grain treated with MPAL all falling below the limit value of 0.1 mg/kg as defined in China's food safety standard (GB 2762-2022). The maximal immobilization efficiency of MPAL on soil Cd figured out by diethylenetriaminepentaacetic acid (DTPA) extraction was 61.5%. The mechanisms involved in Cd immobilization by MPAL were mainly related to the enhanced sorption of Cd onto Fe oxides, and the removal of amorphous or free Fe oxides from soil had a substantial impact on Cd immobilization efficiency by MPAL. Furthermore, the antagonistic effect between Mn and Cd uptake may also contribute to the reduction of wheat Cd accumulation after MPAL application. The current research can provide theoretical and technical support for the large-scale application of MPAL in Cd-contaminated wheat fields.

The future trajectory of carbon emissions in the process of carbon neutrality in South Korea

The excessive use of fossil energy in industrialization has caused the frequent occurrence of global warming and environmental pollution issues, which seriously threaten the sustainable social and economic development of South Korea and other countries. In response to the international community's call to effectively address climate change, South Korea has announced achieving carbon neutrality by 2050. In this context, this paper takes the carbon emission of South Korea from 2016 to 2021 as a sample and focuses on using the GM(1,1) model to predict the carbon emission change trajectory of South Korea in the process of achieving carbon neutrality. The results show: first, in the process of carbon neutrality, South Korea's carbon emissions show a downward trend, with an average annual rate of 2.34%. Second, by 2030, carbon emissions will decline to 502.34 Mt CO2e, down about 26.79% from the 2018 peak. By 2050, South Korea's carbon emissions will decline to 312.65 Mt CO2e, down about 54.44% from the 2018 peak. Third, it is difficult for South Korea to achieve its carbon neutrality target by 2050 based solely on its forest carbon sink storage capacity. Therefore, this study is expected to provide a reference for improving the carbon neutrality promotion strategy in South Korea and strengthening the construction of relevant systems of carbon neutrality, and so can provide some reference for other countries, including China, to improve policy design to promote the green and low-carbon transformation of the global economy.

Effects of co-applied biochar and plant growth-promoting bacteria on soil carbon mineralization and nutrient availability under two nitrogen addition rates

In the background of climate warming, the demand for improving soil quality and carbon (C) sequestration is increasing. The application of biochar to soil has been considered as a method for mitigating climate change and enhancing soil fertility. However, it is uncertain whether the effects of biochar application on C-mineralization and N transformation are influenced by the presence or absence of plant growth-promoting bacteria (PGPB) and soil nitrogen (N) level. An incubation study was conducted to investigate whether the effects of biochar application (0 %, 1 %, 2 % and 4 % of soil mass) on soil respiration, N status, and microbial attributes were altered by the presence or absence of PGPB (i.e., Sphingobium yanoikuyae BJ1) under two soil N levels (N0 and N1 soils as created by the addition of 0 and 0.2 g kg-1 urea- N, respectively). The results showed that biochar, BJ1 strain and their interactive effects on cumulative CO2 emissions were not significant in N0 soils, while the effects of biochar on the cumulative CO2 emissions were dependent on the presence or absence of BJ1 in N1 soils. In N1 soils, applying biochar at 2 % and 4 % increased the cumulative CO2 emissions by 141.0 % and 166.9 %, respectively, when BJ1 was absent. However, applying biochar did not affect CO2 emissions when BJ1 was present. In addition, the presence of BJ1 generally increased ammonium contents in N0 soils, but decreased nitrate contents in N1 soils relative to the absence of BJ1, which indicates that the combination of biochar and BJ1 is beneficial to play the N fixation function of BJ1 in N0 soils. Our results highlight that biochar addition influences not only soil C mineralization but also soil available N, and the direction and magnitude of these effects are highly dependent on the presence of PGPB and the soil N level.

Slow release of attapulgite based nano-enabled glyphosate improves soil phosphatase activity, organic P-pool and proliferation of dominant bacterial community

Glyphosate (Glp) was encapsulated onto the dopamine-modified attapulgite to develop an attapulgite-based nano-enabled Glp (DGlp) in this study with comparable weed control effects to pure Glp and commercial Glp solutions. Within 24 hours, the active Glp molecule was slowly released from DGlp at a maximum remaining rate of over 90%, and then degraded similarly to Glp solution in soil. The addition of DGlp improved soil available phosphorus (P) contents, phosphatase activity, and enzyme extractable P fraction. However, compared to Glp solution, DGlp addition had no effect on the transformation of soil inorganic P fractions. The 16S rRNA sequencing and co-occurrence network results revealed that DGlp had no significant effect on the soil bacterial diversity but diminished the complexity of soil bacterial network. According to the Mantel test, DGlp addition stimulated soil phosphatase activity and proliferation of dominant bacterial taxa (Proteobacteria and Firmicutes) capable of degrading Glp. Proteobacteria and Firmicutes that had been extensively recruited and enriched for their phosphatase activities may have mobilized reactive enzyme-P, significantly enhancing the transformation of reactive organic P and P-pool in soil. These results contributed to our understanding of the ecotoxicity and environmental impacts of nano-enabled Glp prior to its successful and sustainable application in agriculture.

Tracing global N2O emission mitigation strategies through trade networks

Nitrous oxide (N2O) is the third most potent greenhouse gas (GHG) and the most important ozone depleting substance. But how global N2O emissions are connected through the interwoven trade network remains unclear. This paper attempts to specifically trace anthropogenic N2O emissions via global trade networks using a multi-regional input-output model and a complex network model. Nearly one quarter of global N2O emissions can be linked to products traded internationally in 2014. The top 20 economies contribute to about 70% of the total embodied N2O emission flows. In terms of the trade embodied emissions classified by sources, cropland-, livestock-, chemistry-, and other industries-related embodied N2O emissions account for 41.9%, 31.2%, 19.9%, and 7.0%, respectively. Clustering structure of the global N2O flow network is revealed by the regional integration of 5 trading communities. Hub economies such as mainland China and the USA are collectors and distributors, and some emerging countries, such as Mexico, Brazil, India, and Russia, also exhibit dominance in different kinds of networks. This study selects the cattle sector to further verify that low production-side emission intensities and trade cooperation can lead to N2O emission reduction. In view of the impact of trade networks on global N2O emissions, achieving N2O emission reduction calls for vigorous international cooperation.

Phosphorus recovery from sewage sludge ash (SSA): An integrated technical, environmental and economic assessment of wet-chemical and thermochemical methods

Incineration is a promising disposal method for sewage sludge (SS), enriching more than 90% of phosphorus (P) in the influent into the powdered product, sewage sludge ash (SSA), which is convenient for further P recovery. Due to insufficient bioavailable P and enriched heavy metals (HMs) in SSA, it is limited to be used directly as fertilizer. Hence, this paper provides an overview of P transformation in SS incineration, characterization of SSA components, and wet-chemical and thermochemical processes for P recovery with a comprehensive technical, economic, and environmental assessment. P extraction and purification is an important technical step to achieve P recovery from SSA, where the key to all technologies is how to achieve efficient separation of P and HMs at a low economic and environmental cost. It can be clear seen from the review that the economics of P recovery from SSA are often weak due to many factors. For example, the cost of wet-chemical methods is approximately 5∼6 €/kg P, while the cost of recovering P by thermochemical methods is about 2∼3 €/kg P, which is slightly higher than the current P fertilizer (1 €/kg P). So, for now, legislation is significant for promoting P recovery from SSA. In this regard, the relevant experience in Europe is worth learning from countries that have not yet carried out P recovery from SSA, and to develop appropriate policies and legislation according to their own national conditions.

Salicylic acid alleviates Zn-induced inhibition of growth via enhancing antioxidant system and glutathione metabolism in alfalfa

Zinc (Zn) is considered as one of the heavy metal pollutants in soil affecting agriculture. Salicylic acid (SA) is an important phytohormone that can mitigate effects against various abiotic stresses in plants, however, its exploration to improve Zn stress tolerance in alfalfa plants is still elusive. Thus, in the present study, exogenous SA treatment was conducted on alfalfa plants under Zn stress. The effects of exogenous SA on the physiological effects of alfalfa plants and the expression levels related genes were studied. This study tested the biomass, relative water content, chlorophyll levels, photosynthetic capacity, proline and soluble sugar contents, detected the activity of antioxidant enzymes (such as peroxidase and superoxide dismutase), glutathione biosynthesis, and endogenous SA levels, and quantified the genes associated with the antioxidant system and glutathione metabolism-mediated Zn stress. The results showed that exogenous SA could elevate the physiological adaptability of alfalfa plants through enhancing photosynthesis, proline and soluble sugar levels, stimulating antioxidant system and glutathione metabolism, and inducing the transcription level of related genes, thereby diminishing oxidative stress, inhibiting excessive Zn accumulation of alfalfa plants, increasing tolerance to Zn stress, and reducing the toxicity of Zn. Collectively, the application of SA alleviates Zn toxicity in alfalfa plants. The findings gave first insights into the regulatory mechanism of the Zn stress tolerance of alfalfa by exogenous SA and this might have positive implications for managing other plants which are suffering Zn stress.

Fertilization and cultivation management promotes soil phosphorus availability by enhancing soil P-cycling enzymes and the phosphatase encoding genes in bulk and rhizosphere soil of a maize crop in sloping cropland

Fertilization and cultivation managements exert significant effects on crop growth and soil-associated nutrients in croplands. However, there is a lack of knowledge regarding how these practices affect soil phosphorus-cycling enzymes and functional genes involved in regulating global P-cycling, especially under intense agricultural management practices in sloping croplands. A long-term field (15-year) trial was conducted in a 15° sloping field based on five treatments: no fertilizer amendments + downslope cultivation (CK); mixed treatment of mineral fertilizer and organic manure + downslope cultivation (T1); mineral fertilizer alone + downslope cultivation (T2); 1.5-fold mineral fertilizer + downslope cultivation (T3); and mineral fertilizer + contour cultivation (T4). Bulk and rhizosphere soil samples were collected after the maize crop was harvested to determine the P fraction, P-cycling enzymes, and phosphatase-encoding genes. Results indicated that fertilization management significantly increased the inorganic (Pi) and organic soil (Po) P fractions compared to CK, except for NaOH-extractable Po in T1 and T3 in bulk and rhizosphere soils, respectively. For the cultivation treatments, the content of Pi pools in the downslope cultivation of T1 and T3 was significantly larger than that in the contour cultivation of T4 in bulk and rhizosphere soils. However, the content of NaOH-extractable Po in T1 and T3 was lower compared to T4 in bulk soil and vice versa for the NaHCO3-P and HCl-Po fractions in the rhizosphere. We also found that fertilization and cultivation managements significantly increased the activity of acid phosphatase (ACP), alkaline phosphatase (ALP), phytase, phosphodiesterases (PDE), and phoC and phoD gene abundance in bulk and rhizosphere soils, with a larger effect on the activity of ALP and the phosphatase encoding phoD gene, especially in T1 and T3 in the rhizosphere. Soil organic carbon (SOC) and microbial biomass C and P (MBC and MBP) were the main predictors for regulating P-cycling enzymes and phoC- and phoD gene abundance. A strong association of P-cycling enzymes, especially ALP and phytase, and the abundance of phoD genes with the P fraction indicated that the soil P cycle was mainly mediated by microbial-related processes. Together, our results demonstrated that an adequate amount of mineral fertilizer alone or combined with organic fertilizer plus downslope cultivation is more effective in promoting soil P availability by enhancing the activity of ALP, phytase, and phoD genes. This provides valuable information for sustaining soil microbial-regulated P management practices in similar agricultural lands worldwide.

Polyamine-producing bacteria inhibit the absorption of Cd by spinach and alter the bacterial community composition of rhizosphere soil

Polyamines (PAs) are small aliphatic nitrogenous bases with strong biological activity that participate in plant stress response signaling and the alleviation of damage from stress. Herein, the effects of the PA-producing bacterium Bacillus megaterium N3 and PAs on the immobilization of Cd and inhibition of Cd absorption by spinach and the underlying mechanisms were studied. A solution test showed that strain N3 secreted spermine and spermidine in the presence of Cd. Both strain N3 and the PAs (spermine+spermidine) immobilized Cd and increased the pH of the solution. Untargeted metabolomics results showed that strain N3 secreted PAs, N1-acetylspermidine, 3-indolepropionic acid, indole-3-acetaldehyde, cysteinyl-gamma-glutamate, and choline, which correlated with plant growth promotion and Cd immobilization. A pot experiment showed that rhizosphere soil inoculation with strain N3 and PAs improved spinach dry weight and reduced spinach Cd absorption compared with the control. These positive effects were likely due to the increase in rhizosphere soil pH and NH4+-N and PA contents, which can be attributed primarily to Cd immobilization. Moreover, inoculation with strain N3 more effectively inhibited the absorption of Cd by spinach than spraying PAs, mainly because strain N3 enabled a better relative abundance of bacteria (Microvirga, Pedobacter, Bacillus, Brevundimonas, Pseudomonas, Serratia, Devosid, and Aminobacter), that have been reported to have the ability to resist heavy metals and produce PAs. Strain N3 regulated the structure of rhizosphere functional bacterial communities and inhibited Cd uptake by spinach. These results provide a theoretical basis for the prevention of heavy metal absorption by vegetables using PA-producing bacteria.

Bacterial seed endophyte and abiotic factors influence cadmium accumulation in rice (Oryza sativa) along the Yangtze River area

Cadmium (Cd) contamination in rice (Oryza sativa) is particularly problematic due to its high risk to human health. Investigating the hidden roles of seed endophytes of rice in influencing Cd accumulation is essential to comprehensively understand the effects of biotic and abiotic factors to food security. Here, the content of Cd in soils and rice (Huanghuazhan) seeds from 19 sites along the Yangtze River exhibited considerable differences. From a biotic perspective, we observed the dominant endophytic bacteria, Stenotrophomonas (7.25 %), contribute to Cd control of rice (below 0.2 mg kg-1). Partial Least Squares (PLS) analysis further suggested that Enterobacteriaceae (15.48 %), altitude and pH were found to be the strong variables that might reduce the Cd uptake of rice. In contrast, Cytophagaceae (0.58 %), latitude and mean annual air pressure had the opposite effect. In pot experiments, after respectively inoculating the isolated endophytic bacteria Stenotrophomonas T4 and Enterobacter R1, N1 (f_Enterobacteriaceae), the Cd contents in shoot decreased by 47.6 %, 21.9 % and 33.0 % compared to controls. The distribution of Cd resistant genes (e.g., czcABC, nccAB, cznA) of Stenotrophomonas, Enterobacteriaceaea and Cytophagaceae further suggested their distinct manners in influencing the Cd uptake of rice. Overall, this study provides new insights into the food security threatened by globally widespread Cd pollution.

Manganese (II) sulfate affects the formation of iron-manganese oxides in soil and the uptake of cadmium and arsenic by rice

Rice (Oryza sativa L.) consumption represents a major route of human exposure to cadmium (Cd) and arsenic (As), especially in Asia. This study investigated the effects of adding MnSO4 (0, 200, 400, and 800 mg kg-1-1) on the formation of soil Fe/Mn oxides and Cd and As uptake in rice. The application of MnSO4 reduced soil pH, increased Eh, increased the contents of Fe/Mn oxides in the soil, and decreased the total Fe and Mn2+ contents in the porewater. It also led to lower contents of available Cd and As, higher levels of Cd and As bound to Fe/Mn oxides, and higher abundances of Thiobacillus and Syntrophobacter. Furthermore, Mn application increased the Fe and Mn contents in the root Fe/Mn plaque and decreased the grain Cd and As contents. Therefore, Mn application may modify the microbial community and porewater composition in soil, resulting in higher levels of Fe/Mn oxides in soil and Fe/Mn plaque at the root surface and in a lower accumulation of Cd and As in rice grains. Thus, Mn application can be a promising strategy for Cd and As stabilization in soils.

Investigation of dissolved organic matter's influence on the toxicity of cadmium to the cyanobacterium Microcystis aeruginosa by biochemical and molecular assays

Rapid economic development has increased the accumulation of dissolved organic matter (DOM) and heavy metals in aquatic environments. In addition, Microcystis aeruginosa can cause the outbreak of cyanobacteria bloom and can produce microcystin, which poses a threat to human water safety. Therefore, this study analyzed the biochemical and molecular assays of DOM (0, 1, 3, 5, 8, 10 mg C L-1) extracted from four different sources on the toxicity of cadmium (Cd) to M. aeruginosa. The results showed that the addition of different concentrations of DOM from sediment, biochar, and humic acid alleviated the toxicity of Cd to M. aeruginosa. But the addition of rice hulls DOM at high concentrations (8 and 10 mg L-1) significantly reduced the normal growth and metabolic activities of M. aeruginosa. DOM from four different sources promoted the expression level of microcystin-related gene mcyA and the production of microcystin-leucine-arginine (MC-LR), and mcyA was positively correlated with MC-LR. DOM from biochar, sediment, and humic acid were able to bind Cd through complexation. The results will help to understand the toxic effects of heavy metals on toxic-producing cyanobacteria in the presence of DOM, and provide certain reference for the evaluation of water environmental health.

Microbial volatile compounds (MVCs): an eco-friendly tool to manage abiotic stress in plants

Microbial volatile compounds (MVCs) are produced during the metabolism of microorganisms, are widely distributed in nature, and have significant applications in various fields. To date, several MVCs have been identified. Microbial groups such as bacteria and fungi release many organic and inorganic volatile compounds. They are typically small odorous compounds with low molecular masses, low boiling points, and lipophilic moieties with high vapor pressures. The physicochemical properties of MVCs help them to diffuse more readily in nature and allow dispersal to a more profound distance than other microbial non-volatile metabolites. In natural environments, plants communicate with several microorganisms and respond differently to MVCs. Here, we review the following points: (1) MVCs produced by various microbes including bacteria, fungi, viruses, yeasts, and algae; (2) How MVCs are effective, simple, efficient, and can modulate plant growth and developmental processes; and (3) how MVCs improve photosynthesis and increase plant resistance to various abiotic stressors.

The effects and drivers of green financial reform in promoting environmentally-biased technological progress

Promoting green financial reform is an important measure to support environmentally-biased technological progress (EBTP) and achieve sustainable economic and social development. Although China launched a green finance reform and innovation pilot zone (GFRIPZ) policy in 2017, little is known about whether and how such a policy affects EBTP. Based on mathematical deduction, this paper studies the mechanism through which green financial reform influences EBTP. The analysis employs panel data of Chinese prefecture-level cities and a generalized synthetic control method to examine the policy effect of the establishment of GFRIPZ in EBTP. It is found that establishing GFRIPZ significantly promotes EBTP, and that the policy effect shows "ahead-of-policy" and dynamically increasing features. Potential mechanisms reside in the pilot policy's easing of financing constraints and upgrading of industrial structure. Further heterogeneity analyses reveal that great disparities exist in the policy effects of different pilot zones, with a steadily increasing policy effect in Zhejiang and Guangdong, a lagging policy effect in Jiangxi and Guizhou, and an inverse U-shaped policy effect in Xinjiang. Policy effects are much stronger in regions with a higher degree of marketization and a higher level of attention to education. Additional tests of economic performance indicate that the pilot policy, interweaved with its driving effect on EBTP, is conducive to promoting an energy-conservation and low-carbon-energy transition. The findings shed light on applying green financial reform to encourage environment-friendly technological research and development.

Effects of nano metal oxide particles on denitrifying phosphorus removal system: Potential stress mechanism and recovery strategy

The accumulation of nano metal oxide particles (NMOPs) in municipal sewage treatment systems harms the microbial community and its metabolism in activated sludge system, resulting in the degradation of its pollutants removal performance. In this work, the stress effect of NMOPs on the denitrifying phosphorus removal system was systematically investigated in terms of pollutants removal performance, key enzyme activities, microbial community diversity and abundances, and intracellular metabolites. Among the ZnO NPs, TiO₂ NPs, CeO₂ NPs, and CuO NPs, the ZnO NPs showed the most significant impacts with the chemical oxygen demand, total phosphorus, and nitrate nitrogen removal ratio decreased from above 90 % to 66.50 %, 49.13 %, and 57.11 %, respectively. The addition of surfactants and chelating agents could relieve the toxic effect of NMOPs on the denitrifying phosphorus removal system, and the chelating agents were more effective than surfactants in performance recovery. After adding ethylene diamine tetra acetic acid, the removal ratio of chemical oxygen demand, total phosphorus, and nitrate nitrogen under ZnO NPs stress was restored to 87.31 %, 88.79 %, and 90.35 %, respectively. The study provides valuable knowledge to better understand the impacts and stress mechanism of NMOPs on activated sludge systems and provides a solution to recover the nutrients removal performance of denitrifying phosphorus removal system under NMOPs stress.

Substance flow analysis of arsenic and its discharge reduction in the steelworks

Although certain emission standards have been implemented to reduce the air pollution from the steel industry, heavy metal pollution associated with steel production in China has not been well addressed yet. Arsenic is a metalloid element, commonly present in various compounds in many minerals. When it presents in steelworks, it not only affects the quality of steel products, but also causes environmental consequences such as soil degradation, water contamination, air pollution and associated biodiversity loss and public health risks. At present, most of the studies on arsenic were limited to its removal in a certain process, while there has not been a thorough analysis of the flow path of arsenic in steelworks that can facilitate a more efficient removal from its lifecycle. To achieve this, we established a model to depict arsenic flows in steelworks for the first time using adapted substance flow analysis. Then, we further analyzed arsenic flows in the steelworks using a case study in China. Finally, input-output analysis was applied to study the arsenic flow network and explore the reduction potential of arsenic-containing wastes in steelworks. The results show that: 1) the arsenic in the steelworks comes from inputs of iron ore concentrate (55.31 %), coal (12.71 %) and steel scrap (18.67 %), while the outputs were hot rolled coil (65.93 %) and slag (33.03 %). 2) The input, circulation, and final product content of arsenic are 96.120, 32.510, and 66.946 g/t-CS, respectively, and the recycling rate of arsenic was 48.28 %, in the steelworks. 3) The total arsenic discharge from the steelworks is 34.826 g/t-CS. 97.33 % of arsenic is discharged in the form of solid waste. 4) The reduction potential of arsenic in wastes is 14.31 % in the steelworks by adopting low-arsenic raw materials and removing arsenic from processes.

Effects of biochar and freeze‒thaw cycles on the bacterial community and multifunctionality in a cold black soil area

Global climate change has altered soil freeze‒thaw cycle events, and little is known about soil microbe response to and multifunctionality regarding freeze‒thaw cycles. Therefore, in this study, biochar was used as a material to place under seasonal freeze-thaw cycling conditions. The purpose of this study was to explore the ability of biochar to regulate the function of freeze-thaw soil cycles to ensure spring sowing and food production. The results showed that biochar significantly increased the richness and diversity of soil bacteria before and after freezing-thawing. In the freezing period, the B50 treatment had the greatest improvement effect (2.6% and 5.5%, respectively), while in the thawing period, the B75 treatment had the best improvement effect. Biochar changed the composition and distribution characteristics of the bacterial structure and enhanced the multifunctionality of freeze-thaw soil and the stability of the bacterial symbiotic network. Compared with the CK treatment, the topological characteristics of the bacterial ecological network of the B50 treatment increased the most. They were 0.89 (Avg.degree), 9.79 (Modularity), 9 (Nodes), and 255 (Links). The freeze-thaw cycle decreased the richness and diversity of the bacterial community and changed the composition and distribution of the bacterial community, and the total bacterial population decreased by 658 (CK), 394 (B25), 644 (B50) and 86 (B75) during the thawing period compared with the freezing period. The soil multifunctionality in the freezing period was higher than that during the thawing period, indicating that the freeze-thaw cycle reduced soil ecological function. From the perspective of abiotic analysis, the decrease in soil multifunctionality was due to the decrease in soil nutrients, enzyme activities, soil basic respiration and other singular functions. From the perspective of bacteria, the decrease in soil multifunctionality was mainly due to the change in the Actinobacteriota group. This work expands the understanding of biochar ecology in cold black soil. These results are conducive to the sustainable development of soil ecological function in cold regions and ultimately ensure crop growth and food productivity.

Application of silicon and sodium hydrosulfide alleviates arsenic toxicity by regulating the physio-biochemical and molecular mechanisms of Zea mays

Soil contamination with toxic heavy metals (such as arsenic (As)) is becoming a serious global problem due to rapid development of social economy, although the use of silicon (Si) and sodium hydrosulfide (NaHS) has been found effective in enhancing plant tolerance against biotic and abiotic stresses including the As toxicity. For this purpose, a pot experiment was conducted using the different levels of As toxicity in the soil, i.e., (0 mM (no As), 50, and 100 µM) which were also supplied with the different exogenous levels of Si, i.e., (0 (no Si), 1.5, and 3 mM) and also with the NaHS, i.e., (0 (no NaHS), 1, and 2 mM) on growth, photosynthetic pigments, gas exchange characteristics, oxidative stress biomarkers, antioxidant machinery (enzymatic and non-enzymatic antioxidants), and their gene expression, ion uptake, organic acid exudation, and As uptake of maize (Zea mays L.). Results from the present study showed that the increasing levels of As in the soil significantly (P < 0.05) decreased plant growth and biomass, photosynthetic pigments, gas exchange attributes, sugars, and nutritional contents from the roots and shoots of the plants. In contrast, increasing levels of As in the soil significantly (P < 0.05) increased oxidative stress indicators in terms of malondialdehyde, hydrogen peroxide, and electrolyte leakage and also increased organic acid exudation patter in the roots of Z. mays, although the activities of enzymatic antioxidants and the response of their gene expressions in the roots and shoots of the plants and non-enzymatic such as phenolic, flavonoid, ascorbic acid, and anthocyanin contents were initially increased with the exposure of 50 µM As, but decreased by the increasing the As concentration 100 µM in the soil. The negative impact of As toxicity can overcome the application of Si and NaHS, which ultimately increased plant growth and biomass by capturing the reactive oxygen species and decreased oxidative stress in Z. mays by decreasing the As contents in the roots and shoots of the plants. Our results also showed that the Si was more sever and showed better results when we compared with NaHS under the same treatment of As in the soil. Research findings, therefore, suggest that the combined application of Si and NaHS can ameliorate As toxicity in Z. mays, resulting in improved plant growth and composition under metal stress, as depicted by balanced exudation of organic acids.

Arsenic removal and stabilization behavior of schwertmannite@BC (Sch@BC) in contaminated dual media (water/soil): Via sulfate exchange and chemical complexation

Arsenic (As) is extremely harmful to the ecological environment and human health owing to its high toxicity. The composite that biochar (BC) modified by Schwertmannite (Sch), marked as Sch@BC, were prepared to remediate As-contaminated water and soil with a high efficiency. The characterization results showed that the Sch particles were successfully loaded on the BC, providing more active sites for As(V) adsorption. Compared with the pristine BC, the adsorption capacity of Sch@BC-1 was significantly improved (50.00 mg/g), of which the adsorption capacity kept stable over a wide pH range (pH = 2-8). The adsorption process conformed to pseudo-second-order kinetics and Langmuir isotherm model, which indicated that chemical adsorption was the dominant mechanism and the adsorption rate was controlled by intraparticle diffusion. Sch@BC could adsorb As(V) through electrostatic interaction and ion exchange, forming a FeAsO₄ complex and removing As(V). The 5-week soil incubation experiment showed that 3% Sch@BC showed the optimal stabilization effect, while the proportion of stable crystalline Fe/Mn-bound fractionation (F4) increased. Moreover, the results of microbial community diversity showed that Sch@BC interacted with As-resistant dominant microorganisms such as Proteobacteria in soil, promoted their growth and reproduction, and improved the stability of As in soil. In summary, Sch@BC is an excellent agent with broad application prospects for remediating As-contaminated water and soil.

Multi-scenario simulation of China's dynamic relationship between water-land resources allocation and cultivated land use based on shared socioeconomic pathways

Rapid urban expansion, population growth, and limited cultivated land in China necessitate rethinking the path to sustainable management of cultivated land. Understanding the long-term dynamic relationship between water-land resource endowment and cultivated land use contributes to effective management and use of cultivated land. However, few studies have systematically documented this relationship, especially for future trends. Accordingly, we modified water-land resource matching (WLRM) using a more refined grid-scale and assessed cultivated land use efficiency (CLUE), then deployed spatial panel regression models to quantify historical changes. We subsequently simulated future trends under three Shared Socioeconomic Pathways scenarios. The results showed that the relationship assumed an N-shaped curve in nation, while the curve followed a down-up-down pattern in economically less developed regions, largely because of structural transformations of production factors. Under three development scenarios, the stage-specific characteristics of production factors were pronounced, and the dynamic relationship varied across regions.

Promotion effects and mechanisms of molybdenum disulfide on the propagation of antibiotic resistance genes in soil

The rapid development of nanotechnology has aroused considerable attentions toward understanding the effects of engineered nanomaterials (ENMs) on the propagation of antibiotic resistance. Molybdenum disulfide (MoS₂) is an extensively used ENM and poses potential risks associated with environmental exposure; nevertheless, the role of MoS₂ toward antibiotic resistance genes (ARGs) transfer remains largely unknown. Herein, it was discovered that MoS₂ nanosheets accelerated the horizontal transfer of RP4 plasmid across Escherichia coli in a dose-dependent manner (0.5-10 mg/L), with the maximum transfer frequency 2.07-fold higher than that of the control. Integration of physiological, transcriptomics, and metabolomics analyses demonstrated that SOS response in bacteria was activated by MoS₂ due to the elevation of oxidative damage, accompanied by cell membrane permeabilization. MoS₂ promoted bacterial adhesion and intercellular contact via stimulating the secretion of extracellular polysaccharides. The ATP levels were maximally increased by 305.7 % upon exposure to MoS₂, and the expression of plasmid transfer genes was up-regulated, contributing to the accelerated plasmid conjugation and increased ARG abundance in soil. Our findings highlight the roles of emerging ENMs (e.g., MoS₂) in ARGs dissemination, which is significant for the safe applications and risk management of ENMs under the development scenarios of nanotechnology.

Assessment and modeling of effluent quality, economic benefits, and greenhouse gas reduction for receiving brewery wastewater on A2O by GPS-X

Recently, breweries have been allowed to discharge brewery wastewater (BWW) to the sewage pipe network to alleviate the shortage of carbon sources of municipal wastewater treatment plants (MWTPs) under the premise of signing a contract with MWTPs in some countries. This study aims to provide a model-based method for MWTPs to evaluate the threshold, the effluent risk, the economic benefits, and the potential greenhouse gas (GHG) emissions reduction of receiving BWW. In this research, a simulation model of an anaerobic-anoxic-oxic process (A²O) receiving BWW was established based on the data of a real MWTP and brewery using GPS-X. The sensitivity factors of 189 parameters were analyzed, and several sensitive parameters were calibrated stably and dynamically. By analyzing the errors and standardized residuals, the calibrated model was proved to be high-quality and reliable. In the next phase, the impact of receiving BWW on the A²O was evaluated in terms of effluent quality, economic benefits, and GHG emissions reduction. The results showed that receiving a certain amount of BWW can effectively reduce the carbon source cost and GHG emissions for the MWTP compared with adding methanol. Though the chemical oxygen demand (COD), biochemical oxygen demand in five days (BOD₅), and total nitrogen (TN) in the effluent increased in various degrees, the effluent quality still met the discharge standard implemented by the MWTP. The study can also facilitate the modeling work for many researchers and promote more kinds of food production wastewater to be treated equally.

Biorefining of rapeseed meal: A new and sustainable strategy for improving Cr(VI) biosorption on residual wastes from agricultural byproducts after phenolic extraction

Phenolic recovery from agricultural byproducts has been highlighted due to their health-promoting bioactivities. However, uncontrolled discard of residues after extraction process would induce environmental pollution and bioresource waste. In this study, biorefining of phenolic-rich rapeseed meal (RSM) and its defatted sample (dRSM) was attempted by holistic utilization of phenolic extract and residue separately. Phenolic removal could significantly improve residues' Cr(VI) adsorption capacities by about 21%, which presented extended physical surface and more released functional groups. Moreover, simulating raw material by remixing 3% separated phenolic extracts or main component sinapic acid therein with corresponding residues further improved about 12% adsorption efficiencies. These indicated that the different present forms of phenolics had opposite effects on Cr(VI) removal. While natural conjugational form inhibited hosts' biosorption, free form had enhanced functions for either extract or residue. Four optimal adsorption parameters (pH, adsorbent dosage, contact time and initial Cr(VI) concentration), three kinetic (pseudo-first order, pseudo-second order and intra-particle diffusion) models and two isotherms (Langmuir and Freundlich) were used to reveal the adsorption process. The maximum Cr(VI) adsorption capacity on residues could reach about 100 mg/g, which was superior to that of most biosorbents derived from agricultural byproducts, even some biochar. Together with the residues' advantages with everlasting capacity after 3 adsorption-desorption cycles and excellent abilities for adsorbing multiple co-existed metal ions (Cr(VI), Cd(II), Cu(II), Pb(II), Ni(II) and Zn(II)), phenolic recovery was first proved to be a new and sustainable strategy for modifying biosorbents from agricultural byproducts with zero waste.

Multi-faceted CRISPR-Cas9 strategy to reduce plant based food loss and waste for sustainable bio-economy - A review

Currently, international development requires innovative solutions to address imminent challenges like climate change, unsustainable food system, food waste, energy crisis, and environmental degradation. All the same, addressing these concerns with conventional technologies is time-consuming, causes harmful environmental impacts, and is not cost-effective. Thus, biotechnological tools become imperative for enhancing food and energy resilience through eco-friendly bio-based products by valorisation of plant and food waste to meet the goals of circular bioeconomy in conjunction with Sustainable Developmental Goals (SDGs). Genome editing can be accomplished using a revolutionary DNA modification tool, CRISPR-Cas9, through its uncomplicated guided mechanism, with great efficiency in various organisms targeting different traits. This review's main objective is to examine how the CRISPR-Cas system, which has positive features, could improve the bioeconomy by reducing food loss and waste with all-inclusive food supply chain both at on-farm and off-farm level; utilising food loss and waste by genome edited microorganisms through food valorisation; efficient microbial conversion of low-cost substrates as biofuel; valorisation of agro-industrial wastes; mitigating greenhouse gas emissions through forestry plantation crops; and protecting the ecosystem and environment. Finally, the ethical implications and regulatory issues that are related to CRISPR-Cas edited products in the international markets have also been taken into consideration.

Enhanced MFC sensor performances and extracellular electron transport efficiency mediated by biochar and underlying biochemical mechanisms

To explore the application of biosensor in real-time monitoring of composite heavy metal polluted wastewater in view of the low performance of MFC sensor, this study used sodium alginate to immobilize biochar to the anode of MFC biosensor, and conducted a study on the sensor performance and related biological processes. The results showed that under the optimal HRT conditions, the output power of the MFC-sensor (BC-300) was 0.432 W/m³ after biochar modification, which was much higher than the highest power density of CG and BC-0 of 0.117 and 0.088 W/m³. The correlation coefficient was greater than that of the control group at the plating wastewater concentration of 0.1-1.0 M and had a wider detection range, and the time to recover the output voltage was 1/3 of that of the control group. The biochar significantly promoted the sensitivity, interference resistance, recovery and anti-interference performance of the MFC-sensor. The intrinsic mechanism was that the composition and structure of biochar lead to a 1.53 fold increase in the abundance of electrogenic microorganisms and the abundance of functional genes such as cytochrome c (MtrABC, CymA, Cox, etc.) and flavin (riba, Rib B, gdh, ushA, IDH, etc.) increased by about 1.03-3.20 times, which promoted the shift of electrons from intracellular to extracellular receptors and significantly improved the electron transfer and the energy metabolism efficiency. The results of this study can provide a reference for the application of MFCsensor to the detection of complex heavy metal effluents.

How does environmental regulation affect industrial structure upgrading? Evidence from prefecture-level cities in China

This study examines whether and how environmental regulation affects industrial structure upgrading with a panel data of 270 cities between 2006 and 2019. We first adopt two indicators-rationalization and advancement-to quantify industrial structure upgrading and then use kernel density estimation as well as trend surface analysis to investigate these indicators' spatial-temporal pattern. With a spatial Durbin model, we find that environmental regulation has inverted U-shaped and U-shaped direct impacts on rationalization and advancement, and inverted U-shaped indirect impacts on both rationalization and advancement in neighboring regions. Moreover, our subsample tests demonstrate that environmental regulation has various impacts on industrial structure upgrading in different regions. Last, a mediating effect analysis shows that technological innovation is an important path for environmental regulation to promote advancement. Our study provides new evidence for the Porter hypothesis, and offers suggestions for the authorities to formulate and optimize environmental regulation intensity.

Waste bamboo framework decorated with α-FeOOH nanoneedles for effective arsenic (V/III) removal

Arsenic pollution of water is one of the severest environmental challenges for human health, and adsorption is the most often used technique in investigations of selective As removal. However, the development of low-cost and easily recoverable adsorbent for aqueous arsenic adsorption remains a challenge. In this work, the α-FeOOH-decorated monolith bamboo composites (α-FeOOH/MB) were fabricated via directly decorating α-FeOOH nanoneedles on the waste bamboo framework without pre‑carbonization. As expected, the as-prepared α-FeOOH/MB exhibits considerably increased adsorption capacity for aqueous arsenic over pure α-FeOOH nanoneedles, with increases of 1.88 and 1.52 times for As(V) and As(III), respectively. Meanwhile, the α-FeOOH/MB composites exhibit positive reusability (recovering 89.73 % and 80.17 % adsorption capacity for As(V) and As(III) after 5 cycles) and are easy to separate after water treatment. Furthermore, the α-FeOOH/MB composites exhibit high arsenic adsorption selectivity even in the presence of competing anions. Overall, the as-obtained α-FeOOH/MB composites, reuse of waste bamboo, are a kind of favorable candidate for arsenic decontamination in practical application owing to the high adsorption capacity, low-cost and facile separation features.

Pyrometallurgy treatment of electroplating sludge, emulsion mud and coal ash: ZnAlFeO4 spinel separation and stabilization in calcium metasilicate glass

Electroplating sludge was a hazardous waste comprised of heavy metals and other Fe/Al/Ca/Si impurities, and produced massively in surface treatment industry. In the past, it was commonly purified via hydrometallurgy, chlorination and reduction calcination routes, but also blended as additive in rotary kiln, to stabilize the heavy metals in geopolymer. Herein, an alternative strategy was developed to treat a real electroplating sludge for recycling magnetic Zn-rich spinel and stabilizing Zn in calcium metasilicate glass via a facile pyrometallurgy route with the blending of emulsion mud and coal ash. The sludge contained 35.6% Zn and 0.54% Cr and then was blended with 50% emulsion mud. After calcination at 1200 °C, the product was highly dispersed, whilst octahedral ZnAlFeO₄ spinel with Zn content of 40.0% were formed and separated by using magnet, in accordance with the recycling efficiency of 51.2% Zn from the electroplating sludge. But after calcination at 1400 °C, the gypsum in emulsion mud was decomposed as CaO and accelerated the dissolution of Si-bearing substance as calcium metasilicate glass for covering ZnAlFeO₄ spinel, resulting in the Zn leaching of 1568 mg/L. By adding 50% Si-rich coal ash in the calcination system, more calcium metasilicate glass were generated, and then the Zn concentration in the toxic leaching test was only 12.09 mg/L. During the calcination, Cr showed similar performance to Al/Fe and involved in the spinel formation. This provided a new route to recycle Zn from Zn-rich electroplating sludge and to solidify heavy metals via calcium metasilicate glass route.

Chloride removal from flue gas desulfurization wastewater through Friedel's salt precipitation method: A review

As a high efficiency method for chloride removal, Friedel's salt precipitation (FSP) method has attracted much attention in zero liquid discharge (ZLD) of flue gas desulfurization (FGD) wastewater. This review provides comprehensive knowledge of FSP method for chloride removal through analysis of the evolution, reaction mechanisms and influential factors, and describes the recent research progress. FSP method is a cost-efficient technology to remove chloride from saline wastewater by adding lime and aluminate. Chloride ions react with the precipitants by adsorption or/and ion exchange to form Friedel's salt, which is affected by the reaction conditions including reaction time, temperature, interferential ions, etc. The effluent of this process can be reused as the makeup water of desulfurization tower, and the dechloridation precipitates can be reclaimed as adsorption materials and sludge conditioners. That can not only offset a fraction of the treatment cost, but also avoid secondary pollution, so ZLD of FGD wastewater can be achieved. This paper summarizes the deficiencies and potential improvement measures of FSP method. We believe this technology is a promising way to achieve ZLD of FGD wastewater and other wastewater containing chloride, and expect FSP method would become more mature and be widely applied in hypersaline wastewater treatment in the foreseeable future.

A comprehensive appraisal on status and management of remediation of DBPs by TiO2 based-photocatalysts: Insights of technology, performance and energy efficiency

Disinfection has been acknowledged as an inevitable technique in water treatment. However, an inadvertent consequence of generation of carcinogenic and mutagenic disinfection byproducts (DBPs) is associated with the reaction of disinfectants and natural organic matter (NOM) present in water. More than 700 DBPs have been identified in drinking water. The conventional processes carried out in WTPs do not optimally ensure NOM elimination, which evokes the need for the incorporation of other processes. In this context, several physicochemical and advanced oxidation processes (AOP), such as adsorption, membrane techniques, photocatalysis, etc., have been studied for the removal of NOM from water. Photocatalysis using semiconductors has been one of the most proficient technologies, which utilizes light energy for the degradation of recalcitrant organics. The present study aims to provide a comprehensive appraisal on the performance of titanium dioxide (TiO₂) based photocatalysts in the remediation of DBPs concerning the efficacy and energy requirements of the system. Furthermore, the effect of process parameters, such as pH, catalyst dose, light intensity, etc. on the efficacy of the process was also studied. It was observed that conventional P25-TiO₂ powders were efficient in the degradation of dissolved organic carbon (DOC) (up to 90%). However, low photocatalytic activity under visible light activation is one of its significant downsides. Several modifications on the catalyst surface in many studies exhibited advantages, such as high humic acid (HA) degradation under visible light. Furthermore, doped TiO₂ catalysts have shown high total organic carbon (TOC) degradation. The photocatalytic systems have achieved a better decrease in trihalomethane formation potential (THMFP) when compared to haloacetic acid formation potential (HAAFP). The energy requirements of the photocatalytic systems are determined by electrical energy per order (EE/O), which has been observed to be lesser for doped TiO₂ and engineered TiO₂ catalysts when compared with P25-TiO₂ powders. Carbon, iron, silver, etc., based catalysts can be a promising alternative to TiO₂-based photocatalysts for the degradation of NOM, although further research is required in this direction. The present review provides critical highlights on the uses, opportunities, and challenges of TiO₂-based photocatalytic techniques for the management of DBPs and their precursors pertaining to an emerging area of water treatment.

A modified diatomite additive alleviates cadmium-induced oxidative stress in Bidens pilosa L. by altering soil microbial communities

In the present study, a modified silicon adsorbent (MDSA) was used as a passivator, and we explored the mechanism by which the MDSA helps B. pilosa L. alleviate Cd-induced oxidative stress and its effect on the rhizosphere microbial community. Therefore, a field study was conducted, and MDSA was applied at four levels (control (0 mg m^-2), A1 (100 mg m^-2), A2 (200 mg m^-2), and A3 (400 mg m^-2)). The application of MDSA significantly increased the soil pH and decreased the acid-soluble Cd content, which decreased by 30.3% with A3 addition. The addition of MDSA increased the relative abundance of Sordariomycetes due to the increased invertase activity and total nitrogen (TN) and total phosphorus (TP) contents, and the increased soil pH led to increased relative abundances of Alphaproteobacteria and Thermoleophilia. Meanwhile, MDSA addition significantly decreased the Cd concentrations in leaves and stems, which decreased by 19.7 to 39.5% in stems and 24.6 to 43.2% in leaves. All MDSA additions significantly decreased the translocation factor (TF) values of Cd, which decreased by 30.5% (A1), 50.9% (A2), and 52.7% (A3). Moreover, peroxidase (POD) from the antioxidant enzyme system and glutathione (GSH) from the nonenzymatic system played vital roles in scavenging reactive oxygen intermediates (ROIs) such as H₂O₂ and ⋅O₂^- in leaves, thereby helping B. pilosa L. alleviate Cd-induced oxidative stress and promote plant growth. Hence, our study indicated that MDSA application improved the rhizosphere soil environment, reconstructed the soil microbial community, helped B. pilosa L. alleviate Cd-induced oxidative stress, and promoted plant growth.