Long-term stabilization of Cd in agricultural soil using mercapto-functionalized nano-silica (MPTS/nano-silica): A three-year field study

Nano silica-mediated stabilization of heavy metals in contaminated soils

Soil contamination with heavy metals presents a substantial environmental peril, necessitating the exploration of innovative remediation approaches. This research aimed to investigate the efficiency of nano-silica in stabilizing heavy metals in a calcareous heavy metal-contaminated soil. The soil was treated with five nano-silica levels of 0, 100, 200, 500, and 1000 mg/kg and incubated for two months. The results showed that nano-silica had a specific surface area of 179.68 m 2 / g . At 1000 mg/kg, the DTPA-extractable concentrations of Pb, Zn, Cu, Ni, and Cr decreased by 12%, 11%, 11.6%, 10%, and 9.5% compared to the controls, respectively. Additionally, as the nano-silica application rate increased, both soil pH and specific surface area increased. The augmentation of nano-silica adsorbent in the soil led to a decline in the exchangeable (EX) and carbonate-bound fractions of Pb, Cu, Zn, Ni, and Cr, while the distribution of heavy metals in fractions bonded with Fe-Mn oxides, organic matter, and residue increased. The use of 1000 mg/kg nano-silica resulted in an 8.0% reduction in EX Pb, 4.5% in EX Cu, 7.3% in EX Zn, 7.1% in EX Ni, and 7.9% in EX Cr compared to the control treatment. Overall, our study highlights the potential of nano silica as a promising remediation strategy for addressing heavy metal pollution in contaminated soils, offering sustainable solutions for environmental restoration and ecosystem protection.

Effects of environmental metal and metalloid pollutants on plants and human health: exploring nano-remediation approach

Metal and metalloid pollutants severely threatens environmental ecosystems and human health, necessitating effective remediation strategies. Nanoparticle (NPs)-based approaches have gained significant attention as promising solutions for efficient removing heavy metals from various environmental matrices. The present review is focused on green synthesized NPs-mediated remediation such as the implementation of iron, carbon-based nanomaterials, metal oxides, and bio-based NPs. The review also explores the mechanisms of NPs interactions with heavy metals, including adsorption, precipitation, and redox reactions. Critical factors influencing the remediation efficiency, such as NPs size, surface charge, and composition, are systematically examined. Furthermore, the environmental fate, transport, and potential risks associated with the application of NPs are critically evaluated. The review also highlights various sources of metal and metalloid pollutants and their impact on human health and translocation in plant tissues. Prospects and challenges in translating NPs-based remediation from laboratory research to real-world applications are proposed. The current work will be helpful to direct future research endeavors and promote the sustainable implementation of metal and metalloid elimination.

Silicon nanoparticles vs trace elements toxicity: Modus operandi and its omics bases

Phytotoxicity of trace elements (commonly misunderstood as 'heavy metals') includes impairment of functional groups of enzymes, photo-assembly, redox homeostasis, and nutrient status in higher plants. Silicon nanoparticles (SiNPs) can ameliorate trace element toxicity. We discuss SiNPs response against several essential (such as Cu, Ni, Mn, Mo, and Zn) and non-essential (including Cd, Pb, Hg, Al, Cr, Sb, Se, and As) trace elements. SiNPs hinder root uptake and transport of trace elements as the first line of defence. SiNPs charge plant antioxidant defence against trace elements-induced oxidative stress. The enrolment of SiNPs in gene expressions was also noticed on many occasions. These genes are associated with several anatomical and physiological phenomena, such as cell wall composition, photosynthesis, and metal uptake and transport. On this note, we dedicate the later sections of this review to support an enhanced understanding of SiNPs influence on the metabolomic, proteomic, and genomic profile of plants under trace elements toxicity.

Effect and mechanism of nano-materials on plant resistance to cadmium toxicity: A review

Cadmium (Cd), one of the most toxic heavy metals, has been extensively studied by environmental scientists because of its detrimental effects on plants, animals, and humans. Increased industrial activity has led to environmental contamination with Cd. Cadmium can enter the food chain and pose a potential human health risk. Therefore, reducing the accumulation of Cd in plant species and enhancing their detoxification abilities are crucial for remediating heavy metal pollution in contaminated areas. One innovative technique is nano-phytoremediation, which employs nanomaterials ranging from 1 to 100 nm in size to mitigate the accumulation and detrimental effects of Cd on plants. Although extensive research has been conducted on using nanomaterials to mitigate Cd toxicity in plants, it is important to note that the mechanism of action varies depending on factors such as plant species, level of Cd concentration, and type of nanomaterials employed. This review aimed to consolidate and organize existing data, providing a comprehensive overview of the effects and mechanisms of nanomaterials in enhancing plant resistance to Cd. In particular, its deep excavation the mechanisms of detoxification heavy metals of nanomaterials by plants, including regulating Cd uptake and distribution, enhancing antioxidant capacity, regulating gene expression, and regulating physiological metabolism. In addition, this study provides insights into future research directions in this field.

Dynamic crosstalk between silicon nanomaterials and potentially toxic trace elements in plant-soil systems

Agricultural soil pollution with potentially toxic trace elements (PTEs) has emerged as a significant environmental concern, jeopardizing food safety and human health. Although, conventional remediation approaches have been used for PTEs-contaminated soils treatment; however, these techniques are toxic, expensive, harmful to human health, and can lead to environmental contamination. Nano-enabled agriculture has gained significant attention as a sustainable approach to improve crop production and food security. Silicon nanomaterials (SiNMs) have emerged as a promising alternative for PTEs-contaminated soils remediation. SiNMs have unique characteristics, such as higher chemical reactivity, higher stability, greater surface area to volume ratio and smaller size that make them effective in removing PTEs from the environment. The review discusses the recent advancements and developments in SiNMs for the sustainable remediation of PTEs in agricultural soils. The article covers various synthesis methods, characterization techniques, and the potential mechanisms of SiNMs to alleviate PTEs toxicity in plant-soil systems. Additionally, we highlight the potential benefits and limitations of SiNMs and discusses future directions for research and development. Overall, the use of SiNMs for PTEs remediation offers a sustainable platform for the protection of agricultural soils and the environment.

New insight into the mechanisms of preferential encapsulation of metal(loid)s by wheat phytoliths under silicon nanoparticle amendment

Silicon nanoparticles (SiNPs) have been widely used to immobilize toxic trace metal(loid)s (TTMs) in contaminated croplands. However, the effect and mechanisms of SiNP application on TTM transportation in response to phytolith formation and phytolith-encapsulated-TTM (PhytTTM) production in plants are unclear. This study demonstrates the promotion effect of SiNP amendment on phytolith development and explores the associated mechanisms of TTM encapsulation in wheat phytoliths grown on multi-TTM contaminated soil. The bioconcentration factors between organic tissues and phytoliths of As and Cr (> 1) were significantly higher than those of Cd, Pb, Zn and Cu, and about 10 % and 40 % of the total As and Cr that bioaccumulated in wheat organic tissues were encapsulated into the corresponding phytoliths under high-level SiNP treatment. These observations demonstrate that the potential interaction of plant silica with TTMs is highly variable among elements, with As and Cr being the two most strongly concentrated TTMs in the phytoliths of wheat treated with SiNPs. The qualitative and semi-quantitative analyses of the phytoliths extracted from wheat tissues suggest that the high pore space and surface area (≈ 200 m² g^-1) of phytolith particles could have contributed to the embedding of TTMs during silica gel polymerization and concentration to form PhytTTMs. The abundant SiO functional groups and high silicate-minerals in phytoliths are dominant chemical mechanisms for the preferential encapsulation of TTMs (i.e., As and Cr) by wheat phytoliths. Notably, the organic carbon and bioavailable Si of soils and the translocation of minerals from soil to plant aerial parts can impact TTM sequestration by phytoliths. Thus, this study has implications for the distribution or detoxification of TTMs in plants via preferential PhytTTM production and biogeochemical cycling of PhytTTMs in contaminated cropland following exogenous Si supplementation.

Immobilization of Cd by mercapto-palygorskite in typical calcareous and acidic soil aggregates: Performance and differences

The microscale spatial heterogeneity and complexity of soil aggregates affect the properties and distribution of heavy metals (HMs). It has been confirmed that amendments can alter the distribution of Cd in soil aggregates. However, whether the Cd immobilization effect of amendments varies across soil aggregate levels remains unknown. In this study, soil classification and culture experiments were combined to explore the effects of mercapto-palygorskite (MEP) on Cd immobilization in soil aggregates of different particle sizes. The results showed that a 0.05-0.2% MEP application decreased soil available Cd by 53.8-71.62% and 23.49-36.71% in calcareous and acidic soils, respectively. The Cd immobilization efficiency of MEP in calcareous soil aggregates was in the following order: micro-aggregates (66.42-80.19%) > bulk soil (53.78-71.62%) > macro-aggregates (44.00-67.51%), while the efficiency in acidic soil aggregates was inconsistent. In MEP-treated calcareous soil, the percentage change in Cd speciation in micro-aggregates were higher than that in macro-aggregates, whereas there was no significant difference in Cd speciation between the four acidic soil aggregates. Mercapto-palygorskite addition in micro-aggregates of calcareous soil increased the available Fe and Mn concentrations by 20.98-47.10% and 17.98-32.66%, respectively. Mercapto-palygorskite had no effect on soil pH, EC, CEC, and DOC values, while the difference in soil properties between the four particle sizes was the main influencing factor of MEP treatments on Cd in calcareous soil. The effects of MEP on HMs varied across soil aggregates and soil types, but had strong specificity and selectivity for Cd immobilization. This study illustrates the influence of soil aggregates on Cd immobilization using MEP, which can be used to guide the remediation of Cd-contaminated calcareous and acidic soils.

Soil addition of MnSO4 reduces wheat Cd accumulation by simultaneously increasing labile Mn and decreasing labile Cd concentrations in calcareous soil: A two-year pot study

Cadmium (Cd) pollution of wheat fields is a serious environmental and health problem that warrants attention. Manganese (Mn)-containing materials are considered effective for inhibiting Cd accumulation in Cd-contaminated acidic soils. However, information on the long-term remediation effects of Mn fertilizers on Cd accumulation in wheat and on the microbial community in calcareous soils remain limited. Here, a two-year pot experiment was conducted to assess the performance of 0.05-0.2% MnSO₄ addition in Cd-contaminated calcareous soils (total Cd concentration: 3.65 mg/kg) on Cd accumulation in wheat as well as on the soil bacterial community. The formation of Mn oxides and transformation of exchangeable Cd to stable Cd fractions confirmed that the application of MnSO₄ significantly decreased CaCl₂-extractable Cd concentrations in soil (0-47.08%). In addition, MnSO₄ addition improved the antagonistic effect of Cd and Mn ions in the wheat rhizosphere by increasing the available Mn concentration in the soil (1.04-3.52 times), thereby significantly reducing wheat Cd accumulation by 24.66-54.70%. Notably, the addition of MnSO₄ did not affect the richness and diversity (P > 0.05) but altered the composition and function of bacterial communities, especially those involved in metabolism and genetic information processing. Importantly, the effects of MnSO₄ on Cd immobilization in soil (10.66-47.08%) and the inhibition of Cd accumulation in wheat (12.13-54.30%) can last for two years after one addition. Furthermore, the maximum decrease in Cd concentration in grains was found in the low-Cd wheat cultivar, with values of 31.39-54.70% and 19.94-54.30% in the first and second years, respectively. Based on the present findings, the combination of MnSO₄ with a low-Cd wheat cultivar is effective for the safe utilization of Cd-contaminated calcareous soils.

Whole-Process Risk Management of Soil Amendments for Remediation of Heavy Metals in Agricultural Soil-A Review

Reducing the mobility and bioavailability of heavy metals in soils by adding exogenous materials is a technology for remediating soils contaminated with heavy metals. Unlike industrial sites, the use of such techniques in agricultural soils requires consideration of not only reducing the mobility of heavy metals but also avoiding adverse effects on soil fertility and the growth of plants. Due to the uncertainty of the stability of amendments applied to agricultural soil, the application of amendments in farmland soil is controversial. This article reviewed the field studies in which amendments were used to immobilize heavy metals, and identified the potential environmental impacts of all aspects of soil amendment usage, including production and processing, transportation, storage, application to soil, long-term stability, and plant absorption. Results of the study indicated that after identifying the environmental risks of the whole process of the application of improvers in agricultural fields, it is necessary to classify the risks according to their characteristics, and design differentiated risk control measures for the safe application of this type of technology.

The Role of Nanoparticles in Response of Plants to Abiotic Stress at Physiological, Biochemical, and Molecular Levels

In recent years, the global agricultural system has been unfavorably impacted by adverse environmental changes. These changes in the climate, in turn, have altered the abiotic conditions of plants, affecting plant growth, physiology and production. Abiotic stress in plants is one of the main obstacles to global agricultural production and food security. Therefore, there is a need for the development of novel approaches to overcome these problems and achieve sustainability. Nanotechnology has emerged as one such novel approach to improve crop production, through the utilization of nanoscale products, such as nanofertilizer, nanofungicides, nanoherbicides and nanopesticides. Their ability to cross cellular barriers makes nanoparticles suitable for their application in agriculture. Since they are easily soluble, smaller, and effective for uptake by plants, nanoparticles are widely used as a modern agricultural tool. The implementation of nanoparticles has been found to be effective in improving the qualitative and quantitative aspects of crop production under various biotic and abiotic stress conditions. This review discusses various abiotic stresses to which plants are susceptible and highlights the importance of the application of nanoparticles in combating abiotic stress, in addition to the major physiological, biochemical and molecular-induced changes that can help plants tolerate stress conditions. It also addresses the potential environmental and health impacts as a result of the extensive use of nanoparticles.

Sulfhydryl grafted palygorskite amendment with varying loading rates: Characteristic differences and dose-effect relationship for immobilizing soil Cd

Heavy metal contamination in agricultural soil and immobilization remediation have generated widespread concern in all areas of society. Sulfhydryl-functionalized materials as emerging amendments exhibit application potential, but the dose-effect relationship and immobilization mechanism are poorly understood. To understand the relationship between the immobilization effect and total sulfhydryl content, sulfhydryl-grafted palygorskite (SGP) with three sulfhydryl loading rates (0.88 mmol/g, 1.83 mmol/g, and 2.77 mmol/g) was prepared and characterized in the current study. The Cd immobilization efficiency and the dose-effect relationship were investigated via sorption in solutions, soil incubation, and field-scale wheat cultivation. ²⁹Si nuclear magnetic resonance, X-ray diffraction, differential scanning calorimetry, X-ray photoelectron spectroscopy, zeta potential, and potentiometric titration analyses confirmed that the sulfhydryl loading rates had little impact on the mineral structure but had a significant effect on the SGP surface properties. The sorption process of Cd²⁺ on SGP can be described by the 2nd order kinetic model and the Langmuir isotherm. The maximal sorption capacities had a linear relationship with the experimental sulfhydryl content in SGP. Meanwhile, SGP with three loading rates under different doses reduced available Cd concentrations in alkaline soil by 28.40 %-87.78 % in soil incubation and wheat grain Cd by 21.95 %-80.19 % in field-scale demonstration The relationship between immobilization efficiency and the total sulfhydryl group could be adequately described using the Michaelis-Menten equation. The sulfhydryl group was the key site for SGP amendments, which when added to the soil, reduced the bioavailability of soil Cd. Clarification of the dose-effect relationship will provide theoretical support for the accurate regulation of safe utilization of Cd-contaminated farmland.

Assessment of Cd Pollution in Paddy Soil-Rice System in Silver Mining-Affected Areas: Pollution Status, Transformation and Health Risk Assessment

Mining activities are one of the main contamination sources of Cd in soil. However, the information about the influence of silver mining on Cd pollution in soil in mining-affected areas is limited. In the present study, sixteen paired soil and rice grain samples were collected from the farmland along the Luxi River nearby a silver mine in Yingtan City, Jiangxi Province, China. The total, bioavailable, and fraction of Cd in soil and Cd content in rice grain were determined by inductively coupled plasma mass spectrometry. The transformation of Cd in the soil-rice system and potential health risk via consumption of these rice grains were also estimated. The results showed that Cd concentration in these paddy soils ranged from 0.21 to 0.48 mg/kg, with the mean Cd concentration (0.36 mg/kg) exceeded the national limitation of China (0.3 mg/kg, GB 15618-2018). Fortunately, all these contaminated paddy soils were just slightly polluted, with the highest single-factor pollution index value of 1.59. The DTPA- and CaCl₂-extractable Cd in these paddy soils ranged from 0.16 to 0.22 mg/kg and 0.06 to 0.11 mg/kg, respectively, and the acid-soluble Cd occupied 40.40% to 52.04% of the total Cd, which was the highest among different fractions. The concentration of Cd in rice grain ranged from 0.03 to 0.39 mg/kg, and the mean Cd concentration in rice grain (0.16 mg/kg) was within the national limitation of China (0.2 mg/kg, GB 2762-2017). The bioaccumulation factor of Cd in rice grain ranged from 0.09 to 1.18, and its correlation with various indicators was nonsignificant (p < 0.05). Health risk assessment indicated that the noncarcinogenic risk for local rice consumers was within the acceptable range, but the carcinogenic risk (CR) was ranging from 1.24 × 10^-2 to 1.09 × 10^-3 and higher than the acceptable range (1.0 × 10^-4), indicating that the local rice consumers suffered serious risk for carcinogenic diseases. The results of the present study can provide reference for safety production of rice in silver mining-affected areas.

Combined remediation effects of biochar, zeolite and humus on Cd-contaminated weakly alkaline soils in wheat farmland

Threats posed by Cd-contaminated arable soils to food security have attracted increasing attention. The combination of organic and inorganic amendments has been extensively applied to immobilize Cd in paddy soils. However, the regulatory mechanism of Cd fractionation under these combined amendments and the effect on wheat Cd accumulation remain unclear in upland soils. In this work, different combinations of organic and inorganic amendments were prepared with biochar, zeolite and humus, and the Cd-immobilization mechanism was also investigated in field experiments. The results demonstrated that the mixture of biochar, zeolite and humus had excellent Cd immobilization performance in highly Cd-contaminated (4.26 ± 1.25 mg kg^-1) weakly alkaline soils, resulting in 76.5-84.8% decreases in soil available Cd. The contribution of single components to Cd immobilization in the combined amendment follows the order of humus > biochar > zeolite. The combined amendment converted the acid soluble Cd to the Cd bound to the reducible fraction with higher stability, thereby decreasing Cd bioavailability. The maximum Cd decrease rate in wheat roots, straw and grains could reach 68.2%, 45.0% and 59.3%, respectively, and the Cd content in grains (0.098 mg kg^-1) was lower than the food security standards of China (0.1 mg kg^-1). Wheat planting for two successive years in a large-scale field further verified the superior Cd immobilization performance and stability of the combined amendment in moderately to slightly Cd-contaminated soil. The present study provides references for the remediation of Cd-contaminated weakly alkaline upland soils and certain guidance for safe food production.

Remediation of heavy metal(loid) contaminated soil through green nanotechnology

Modern industrialization is progressively degrading soil quality due to heavy metal contamination. Heavy metal (HM) contamination of agricultural soil has gained considerable attention due to its rapidly increasing levels. Nanoparticles (NPs) have unique physicochemical properties that make them effective stress relievers. Material science has recently been emphasizing “green” synthesis as a reliable, environmentally friendly, and sustainable method of synthesizing different kinds of materials, such as alloys, metal oxides, hybrids, and bioinspired materials. Therefore, green synthesis can be viewed as an effective tool to reduce the detrimental effects of the traditional nanoparticle synthesis methods commonly used in laboratories and industries. The review briefly describes the biosynthesis of NPs, the use of nanobiotechnology to remediate heavy metal-contaminated soil, the effect that NPs have on growth and development of plants, the behavior of NPs within plants when exposed to pollutants and the mechanisms used to alleviate HM stress. In addition, a broad overview of the major types of nanomaterials used so far in bioremediation of toxic heavy materials, recent advances regarding HM stress and the possible mechanisms by which NPs and HM interact in the agricultural system are also discussed.

Effects of combined soil amendments on Cd accumulation, translocation and food safety in rice: a field study in southern China

Excessive Cd content and high Cd/Zn ratio in rice grains threaten human health. To study the reduction effects of combined soil amendments on Cd content and Cd/Zn ratio in rice planting in soils with different Cd contamination levels, we conducted field trials in three regions of Hunan province, China. Six field treatments were designed in each study area, including control (CK), lime alone (L), lime combined with sepiolite (LS), phosphate fertilizer (LP), organic fertilizer (LO) and phosphate fertilizer + organic fertilizer (LPO). The application of the combined amendments reduced the Cd content in rice grains to less than the Food Health Standard of China (0.2 mg/kg) and the Cd/Zn ratio to less than the safety threshold of 0.015. The average reduction rates of grain Cd content under the combined treatments among the three regions increased with the increase in Cd content in the soil. Meanwhile, the amendments also decreased the soil available Cd and Zn concentration significantly. The LO had the highest efficiency on decreasing Cd content in rice grains among these amendments, which is ranged from 44.6% to 52.8% in the three regions compared with CK. Similarly, high reduction rates of Cd/Zn ratio were found in the LO treatment, with an average value of 57.3% among the three regions. The grain Cd contents and Cd/Zn ratios were significantly correlated with the soil available Cd concentrations, plant uptake factor and the straw to rice grain translocation factor (TF_gs) (P < 0.05). The results indicated that the combined soil amendments, especially lime combined with organic fertilizer, would be an effective way to control Cd content in rice.

Immobilization of soil Cd by sulfhydryl grafted palygorskite in wheat-rice rotation mode: A field-scale investigation

The safe utilization of heavy metal contaminated farmland has attracted extensive attention of the whole society, and there is an urgent need to develop novel high-efficiency amendments. To clarify the actual remediation effect and potential for large-scale application of sulfhydryl grafted palygorskite (SGP) in Cd polluted soil in wheat-rice rotation mode, a field-scale experiment was conducted. SGP at the dosages of 0.5 g/kg-2.0 g/kg could reduce gain Cd contents by 27.15-59.05% and 16.16-79.47% for wheat and rice, respectively. The maximal decreases of soil available Cd figured out by DTPA extraction in wheat and rice season were 58.18% and 33.67%, respectively. The immobilization ratio for Cd was much more than that of trace elements, including Fe, Mn, Cu, and Zn, Ni. SGP showed an effective immobilization rate for soil Cd under the interference of many elements in the soil, pointing to the targeting and selectivity of its high-efficiency immobilization. It had no lifting effect on soil pH but decreased zeta potentials of soil particles. The sorption of Cd²⁺ on SGP amended soil could be fitted by the second-order kinetic model and Langmuir isotherm, and the changes of thermodynamic parameters showed SGP strengthened the fixation. SGP made the biological accumulation coefficient and transfer factor of rice grain drop dramatically but had no noticeable effect on these parameters of winter wheat, indicating different botanical responses. SGP as a novel immobilization amendment may provide an efficient and sustainable solution for the remediation of contaminated soil in wheat-rice rotation mode in field-scale.

Enhancing the Phytoremediation of Heavy Metals by Combining Hyperaccumulator and Heavy Metal-Resistant Plant Growth-Promoting Bacteria

Heavy metals (HMs) have become a major environmental pollutant threatening ecosystems and human health. Although hyperaccumulators provide a viable alternative for the bioremediation of HMs, the potential of phytoremediation is often limited by the small biomass and slow growth rate of hyperaccumulators and HM toxicity to plants. Here, plant growth-promoting bacteria (PGPB)-assisted phytoremediation was used to enhance the phytoremediation of HM-contaminated soils. A PGPB with HM-tolerant (HMT-PGPB), Bacillus sp. PGP15 was isolated from the rhizosphere of a cadmium (Cd) hyperaccumulator, Solanum nigrum. Pot experiments demonstrated that inoculation with strain PGP15 could significantly increase the growth of S. nigrum. More importantly, strain PGP15 markedly improved Cd accumulation in S. nigrum while alleviating Cd-induced stress in S. nigrum. Specifically, PGP15 inoculation significantly decreased the contents of H₂O₂, MDA, and O 2 · - in S. nigrum, while the activities (per gram plant fresh weight) of SOD, APX, and CAT were significantly increased in the PGP15-inoculated plants compared with the control sample. These results suggested that the interactions between strain PGP15 and S. nigrum could overcome the limits of phytoremediation alone and highlighted the promising application potential of the PGPB-hyperaccumulator collaborative pattern in the bioremediation of HM-contaminated soils. Furthermore, the PGP15 genome was sequenced and compared with other strains to explore the mechanisms underlying plant growth promotion by HMT-PGPB. The results showed that core genes that define the fundamental metabolic capabilities of strain PGP15 might not be necessary for plant growth promotion. Meanwhile, PGP15-specific genes, including many transposable elements, played a crucial role in the adaptive evolution of HM resistance. Overall, our results improve the understanding of interactions between HMT-PGPB and plants and facilitate the application of HMT-PGPB in the phytoremediation of HM-contaminated soils.

Silica nanoparticles protect rice against biotic and abiotic stresses

BACKGROUND

By 2050, the world population will increase to 10 billion which urged global demand for food production to double. Plant disease and land drought will make the situation more dire, and safer and environment-friendly materials are thus considered as a new countermeasure. The rice blast fungus, Magnaporthe oryzae, causes one of the most destructive diseases of cultivated rice worldwide that seriously threatens rice production. Unfortunately, traditional breeding nor chemical approaches along control it well. Nowadays, nanotechnology stands as a new weapon against these mounting challenges and silica nanoparticles (SiO₂ NPs) have been considered as potential new safer agrochemicals recently but the systematically studies remain limited, especially in rice.

RESULTS

Salicylic acid (SA) is a key plant hormone essential for establishing plant resistance to several pathogens and its further affected a special form of induced resistance, the systemic acquired resistance (SAR), which considered as an important aspect of plant innate immunity from the locally induced disease resistance to the whole plant. Here we showed that SiO₂ NPs could stimulate plant immunity to protect rice against M. oryzae through foliar treatment that significantly decreased disease severity by nearly 70% within an appropriate concentration range. Excessive concentration of foliar treatment led to disordered intake and abnormal SA responsive genes expressions which weaken the plant resistance and even aggravated the disease. Importantly, this SA-dependent fungal resistance could achieve better results with root treatment through a SAR manner with no phytotoxicity since the orderly and moderate absorption. What's more, root treatment with SiO₂ NPs could also promote root development which was better to deal with drought.

CONCLUSIONS

Taken together, our findings not only revealed SiO₂ NPs as a potential effective and safe strategy to protect rice against biotic and abiotic stresses, but also identify root treatment for the appropriate application method since it seems not causing negative effects and even have promotion on root development.

Effects of Modified Biochar on the Mobility and Speciation Distribution of Cadmium in Contaminated Soil

Cadmium-contaminated soil poses a threat to the environment and human health. Biochar materials have received widespread attention as an in situ immobilizer for the efficient remediation of heavy-metal-contaminated soils. In this study, a modified biochar material (E–CBC) was developed for the immobilization of Cd in contaminated soil. E–CBC was characterized by XPS, SEM, BET, and FTIR. The effects of pristine biochar (BC) and E–CBC on soil physicochemical properties (pH and soil organic matter (SOM)), CaCl2-extractable Cd, total characteristics leaching procedure (TCLP) Cd, and speciation distribution of Cd were studied by incubation experiments. The results showed that the application of BC and E–CBC increased soil pH slightly and SOM significantly. A 2% dosage BC and E–CBC treatment reduced CaCl2-extractable Cd by 14.62% and 91.79%, and reduced TCLP Cd by 9.81% and 99.8%, respectively. E–CBC was shown to effectively induce the transition of Cd in the soil to a stable state. The application of a 0.25% dosage of E–CBC reduced the acid-extractable fraction of Cd from 58.06% to 10.66%. The functional groups increased after modification and may play an important role in the immobilization of Cd in the contaminated soil. In conclusion, E–CBC is a promising in situ immobilizer for the remediation of Cd-contaminated soil.

Amine- and thiol-bifunctionalized mesoporous silica material for immobilization of Pb and Cd: Characterization, efficiency, and mechanism

In this study, a two-step functionalizing strategy by combining co-condensation with grafting procedures was employed to synthesize well-ordered Amino- and Thiol-Bifunctionalized SBA-15 (ATBS) mesoporous silica. Its physicochemical properties, performance, and mechanisms in immobilization of toxic metals Pb and Cd in water and soil were investigated. After bi-functionalization, X-ray diffractometer, transmission electron microscope, and N₂ adsorption-desorption measurements confirmed that the ATBS maintained a highly-ordered mesoporous structure, large surface area and pore volume. The elemental analysis, Fourier transform infrared spectroscopy and X-ray Photoelectron Spectroscopy (XPS) evidenced the successful incorporation of amine and thiol groups into ATBS. These structure and functional characteristics of ATBS benefited Pb and Cd sorption. Sorption isotherms of Pb and Cd were better fit with Sips and Redlich-Peterson models. Sorption kinetics suggested that Pb sorption was mainly regulated by chemical reactions, whereas both diffusion process and chemical reactions were rate-regulating steps in Cd sorption. ATBS showed the maximum sorption capacities for Pb and Cd at 120 and 38 mg g^-1, respectively. The sorption mechanisms revealed by XPS measurements suggested that Cd sorption was mainly attributed to thiol groups while Pb was efficiently bond to both thiol and amino groups. High and stable sorption efficiencies were attained in the pH range of 4-6, with a higher affinity towards Pb than Cd. Furthermore, its ability to immobilize Pb and Cd in soils was examined with an incubation experiment, which showed that ATBS reduced 30-56% of MgCl₂-extractable Pb and Cd in a contaminated soil. The synthesized sorbent via the two-step functionalizing strategy shows high sorption efficiency towards Pb and Cd, and thus it has potential application in remediating Pb and Cd contaminated water and soils.

Migration of heavy metals in the soil-grape system and potential health risk assessment

The accumulation of heavy metals in soil may introduce them to the food chain and cause health risks for humans. In the present study, 43 pairs of soil and grape samples (leaf and fruit) were collected form vineyards in the suburbs of Kaifeng city (wastewater-irrigated area in Henan Province, China) to assess the heavy metal (Pb, Cd, Cu, Zn and Ni) pollution level in soil, heavy metal accumulation in different grape tissues and the potential health risk via consumption of grapes. The results showed that the average contents of Pb, Cd, Cu, Zn and Ni in vineyard soil were 42.27, 3.08, 62.33, 262.54 and 26.60 mg/kg, respectively. Some of these soil samples were severely contaminated with Cd and Zn, with an average pollution index (P_i) of 5.14 and 0.88, respectively. Most of these soil samples were severely polluted by heavy metals, with an average Nemerow integrated pollution index (P_N) of 3.77. The bioavailable heavy metals were negatively correlated with soil pH and positively correlated with soil organic matter (OM). In addition, heavy metals were more likely to accumulate in grape leaves, and their contents in grape pulp were all within the maximum permissible limit set by China (GB 2762-2017). The average bioaccumulation factors (BFs) of Pb, Cd, Cu, Zn and Ni in grape pulp were 0.007, 0.096, 0.160, 0.078 and 0.023, respectively. Health risk assessment indicated that there was no noncarcinogenic risk for grape consumers (adults and children). However, the carcinogenic risk (CR) ranged from 4.95 × 10^-7 to 2.17 × 10^-4, and the CR value of three grape samples was higher than 10^-4, indicating that a probability of carcinogenic disease existed for humans who regularly consumed the grapes from this region.

Accumulation and partitioning of toxic trace metal(loid)s in phytoliths of wheat grown in a multi-element contaminated soil

Cropland contamination by toxic trace metal (loid)s (TTMs) has attracted increasing attention due to the serious consequential threat to crop quality and human health. Mitigation of plant TTM stress by silica amendment has been proposed recently. However, the relationship between the siliceous structure of phytoliths and TTMs in plants, and the environmental implications of phytolith-occluded trace metal (loid)s (PhytTMs) remain unclear. This study assessed the accumulation of five metal (loid)s, including lead (Pb), zinc (Zn), cadmium (Cd), copper (Cu) and arsenic (As), in the organic tissues and phytoliths of wheat grown in a mixed-TTM contaminated soil under both lightly and heavily contaminated conditions. The results show that the concentrations of plant TTMs and PhytTMs were significantly (p < 0.05) positively correlated, and higher in heavily contaminated wheats than those in lightly contaminated ones. The bio-enrichment factors between phytoliths and organic tissues were higher for As (1.83), Pb (0.27) and Zn (0.30) than for Cd (0.03) and Cu (0.14), implying that As, Pb and Zn were more readily co-precipitated with silicon (Si) in phytolith structures than Cd and Cu. Network analysis of the relationship between soil and plant elements with PhytTMs showed that severe contamination could impact the homeostasis of elements in plants by altering the translocation of TTMs between soils, plants, and phytoliths. The accumulation of TTMs in phytoliths was affected by the capacity of Si deposition in tissues and chelation of TTMs with silica, which could impact the role of PhytTMs in global biogeochemical TTM cycles.

Influences of modified biochar on metal bioavailability, metal uptake by wheat seedlings (Triticum aestivum L.) and the soil bacterial community

A 6 weeks pot culture experiment was carried out to investigate the stabilization effects of a modified biochar (BCM) on metals in contaminated soil and the uptake of these metals by wheat seedlings. The results showed that the application of BCM significantly increased the soil fertility, the biomass of wheat seedling roots increased by more than 50%, and soil dehydrogenase (DHA) and catalase (CAT) activities increased by 369.23% and 12.61%, respectively. In addition, with the application of BCM, the diethylenetriaminepentaacetic acid extractable (DTPA-extractable) Cd, Pb, Cu and Zn in soil were reduced from 2.34 to 0.38 mg/kg, from 49.27 to 25.65 mg/kg, from 3.55 mg/kg to below the detection limit and from 4.05 to 3.55 mg/kg, respectively. Correspondingly, the uptake of these metals in wheat roots and shoots decreased by 62.43% and 79.83% for Cd, 73.21% and 66.32% for Pb, 57.98% and 68.92% for Cu, and 40.42% and 43.66% for Zn. Furthermore, BCM application decreased the abundance and alpha diversity of soil bacteria and changed the soil bacterial community structure dramatically. Overall, BCM has great potential for the remediation of metal-contaminated soils, but its long-term impact on soil metals and biota need further research.

Effects of Silicon and Silicon-Based Nanoparticles on Rhizosphere Microbiome, Plant Stress and Growth

Silicon (Si) is considered a non-essential element similar to cadmium, arsenic, lead, etc., for plants, yet Si is beneficial to plant growth, so it is also referred to as a quasi-essential element (similar to aluminum, cobalt, sodium and selenium). An element is considered quasi-essential if it is not required by plants but its absence results in significant negative consequences or anomalies in plant growth, reproduction and development. Si is reported to reduce the negative impacts of different stresses in plants. The significant accumulation of Si on the plant tissue surface is primarily responsible for these positive influences in plants, such as increasing antioxidant activity while reducing soil pollutant absorption. Because of these advantageous properties, the application of Si-based nanoparticles (Si-NPs) in agricultural and food production has received a great deal of interest. Furthermore, conventional Si fertilizers are reported to have low bioavailability; therefore, the development and implementation of nano-Si fertilizers with high bioavailability could be crucial for viable agricultural production. Thus, in this context, the objectives of this review are to summarize the effects of both Si and Si-NPs on soil microbes, soil properties, plant growth and various plant pathogens and diseases. Si-NPs and Si are reported to change the microbial colonies and biomass, could influence rhizospheric microbes and biomass content and are able to improve soil fertility.

Assessing the influence of immobilization remediation of heavy metal contaminated farmland on the physical properties of soil

The potential for negative effects of heavy metal remediation on the ecological environment of soil is an issue of widespread concern. As a basic index of soil moisture and fertility retention capacity, the response of the physical properties of soil to immobilization remediation is therefore extremely important and is the main focus of this study on remediated farmland in the mining area of Tangshi village, Henan province, China. Accordingly, topsoil samples and ring knife samples were collected from five separate farmland plots, four of which had been remediated with the respective soil amendments of 1) nano silica; 2) silicate, phosphate and clay minerals; 3) biochar and organic fertilizer; and 4) biochar and phosphate; whilst for experimental control purposes the 5th plot had no remediation measures. The physical properties of particle composition, bulk density, porosity and aggregate were subsequently determined. The results show that nano silica tends to refine the soil, mainly by significantly reducing the content of sand and increasing the content of silt and clay, but did not change the soil texture type. Furthermore, nano silica can promote the formation of soil macro-aggregates and reduce the content of micro-aggregates. However, the other three amendment compositions show no significant effect on soil particle composition and aggregate content. On the whole, the amendments of the four remediation plots can significantly reduce soil bulk density and increase porosity, thus facilitating soil changes that are more beneficial for crop growth. The results, therefore, go some way into alleviating the concerns surrounding heavy metal remediation and damage to the ecological environment of soil.

Highly effective stabilization of Cd and Cu in two different soils and improvement of soil properties by multiple-modified biochar

Heavy metal contamination in soil has attracted great attention worldwide. In situ stabilization has been considered an effective way to remediate soils contaminated by heavy metals. In the present research, a multiple-modified biochar (BCM) was prepared to stabilize Cd and Cu contamination in two different soils: a farmland soil (JYS) and a vegetable soil (ZZS). The results showed that BCM was a porous-like flake material and that modification increased its specific surface area and surface functional groups. The incubation experiment indicated that BCM decreased diethylenetriaminepentaacetic (DTPA)-extractable Cd and Cu by 92.02% and 100.00% for JYS and 90.27% and 100.00% for ZZS, respectively. The toxicity characteristic leaching procedure (TCLP)-extractable Cd and Cu decreased 66.46% and 100.00% for JYS and 46.33% and 100.00% for ZZS, respectively. BCM also reduced the mobility of Cd and Cu in soil and transformed them to more stable fractions. In addition, the application of BCM significantly increased the soil dehydrogenase, organic matter content and available K (p < 0.05). These results indicate that BCM has great potential in the remediation of Cd- and Cu-contaminated soil.

Diagnosis and evaluation of the health status of sediment-water-farmland-rice system in Longtang

As one of the largest electronic waste (e-waste) disassembling sites in China, environmental quality and human health of Longtang town have always been the focus of concern and research. With the effective enforcement of relevant laws, most informal e-waste dismantling centers have been shut down, but heavy metals are non-biodegradable and easily enriched contaminants that are difficult to remove from the environment. This research investigated the heavy metal (Cd, Pb, Cu, Zn, As, and Cr) level in sediments, water, paddy soils, and the matched rice plants in Longtang, and assessed the potential ecological risk and human health risk of heavy metals. The results showed that the heavy metal content was highest in the sediment, followed by paddy soil and rice, the lowest in water, and the surface water was higher than groundwater. In the paddy soil, the heavy metal content in the topsoil was the highest, and all exceeded the soil background value of Guangdong Province, and the level of Cu (129.45 mg kg^-1), Cd (0.44 mg kg^-1), and Pb (100.63 mg kg^-1) exceeded the national risk screening value (GB 15618-2018). Compared with previous studies, the contents of Cd, Cu, and Zn in soil showed a downward trend. Potential ecological risk assessment showed that the risk level of Cd in the topsoil was high, and the risk levels of Cd and Cu in the sediment were very high and considerable, respectively, posing a major risk to human health. In rice plants, heavy metals mainly accumulated in the roots of rice, and their migration ability in rice tissues was poor. The heavy metal level in grain was within the threshold value set by the Codex Alimentarius Commission (CAC, CXS 193-1995) or China (GB 2762-2017), and the risk level to human health was low. Accordingly, it is imperative to continuously monitor the content of heavy metals in the sediment and soil of Longtang, especially Cu and Cd.

Application of Nanoparticles Alleviates Heavy Metals Stress and Promotes Plant Growth: An Overview

Nanotechnology is playing a significant role in addressing a vast range of environmental challenges by providing innovative and effective solutions. Heavy metal (HM) contamination has gained considerable attention in recent years due their rapidly increasing concentrations in agricultural soil. Due to their unique physiochemical properties, nanoparticles (NPs) can be effectively applied for stress alleviation. In this review, we explore the current status of the literature regarding nano-enabled agriculture retrieved from the Web of Science databases and published from January 2010 to November 2020, with most of our sources spanning the past five years. We briefly discuss uptake and transport mechanisms, application methods (soil, hydroponic and foliar), exposure concentrations, and their impact on plant growth and development. The current literature contained sufficient information about NPs behavior in plants in the presence of pollutants, highlighting the alleviation mechanism to overcome the HM stress. Furthermore, we present a broad overview of recent advances regarding HM stress and the possible mechanism of interaction between NPs and HM in the agricultural system. Additionally, this review article will be supportive for the understanding of phytoremediation and micro-remediation of contaminated soils and also highlights the future research needs for the combined application of NPs in the soil for sustainable agriculture.

Effectively reducing the bioavailability and leachability of heavy metals in sediment and improving sediment properties with a low-cost composite

Heavy metal-contaminated sediment is a common environmental problem. In situ stabilization is an effective and low-cost method to remediate heavy metal-contaminated sediment. In this study, a red mud-based low-cost composite (RMM) was used to stabilize heavy metal-contaminated sediment. RMM was mixed with heavy metal-contaminated sediment at the doses of 0%, 1%, 3% and 5%. The CaCl₂-extractable, DTPA-extractable, leachability (TCLP) and heavy metal fractions were analysed to evaluate the stabilization efficiency of RMM for heavy metals. The selected properties and microbial activities of the sediment were analysed to verify the safety of RMM to sediment. The results showed that RMM reduced the DTPA-, CaCl₂- and TCLP-extractable heavy metals in sediment. At an RMM dose of 5%, DTPA-, CaCl₂- and TCLP- extractable heavy metals were reduced by 7.60%, 72.34% and 69.24% for Pb; 18.20%, 76.7% and 23.57% for Cd; 32.7%, 96.50% and 49.64% for Zn; and 35.0%, 61.20% and 55.27% for Ni, respectively. TCLP- and DTPA-extractable Cu was reduced by 71.15% and 12.90%, respectively. In contrast, CaCl₂-extractable Cu increased obviously after the application of RMM. RMM reduced the acid-soluble fraction of Zn by 6.99% and increased the residual fraction of Ni by 4.28%. However, the influence of RMM on the fractions of Pb, Cd and Cu was nonsignificant. In addition, the application of RMM increased the pH values of the sediment, and the microbial activity in the sediment was also obviously enhanced. These results indicated that RMM has great potential in the remediation of heavy metal-contaminated sediment.

Mercapto propyltrimethoxysilane- and ferrous sulfate-modified nano-silica for immobilization of lead and cadmium as well as arsenic in heavy metal-contaminated soil

Nano-silica as an important part of soil is an ideal carrier of passivator material. In this paper, nano-silica was modified by silane coupling agent containing mercapto group and iron (II) salt to afford an organic-inorganic hybrid containing -S-Fe-S functional group (coded as RNS-SFe) on the surface of nano-silica. Results demonstrate that the RNS-SFe nanoparticle has network-like spheroidal shape and a primary particle size is about 18.0 nm. The RNS-SFe hybrid as a potential immobilization agent for heavy metal in soil shows excellent performance for the remediation of the contaminated soil. Specifically, with a dosage of 3.0% (mass ratio) in the soil, it can immobilize bioavailable Pb, Cd, and As by 97.1%, 85.0%, and 80.1%, respectively. Namely, the RNS-SFe hybrid can transform the bioavailable Pb, Cd, and As into insoluble mercapto metal compounds (-S-Pb-S- and -S-Cd-S-) and less soluble iron arsenate (Fe₃(AsO₄)₂, FeAsO₄) precipitate on the surface of nano-silica particle, thereby reducing the toxicity and mobility of the toxic contaminant fractions. In the meantime, the immobilized products of the Pb, Cd and As fractions have good resistance against acid leaching. These results are contributive to the application of RNS-SFe for the remediation of multi-heavy metal-contaminated soils in field.

Efficiency and kinetics of conventional pollutants and tetracyclines removal in integrated vertical-flow constructed wetlands enhanced by aeration

The integrated vertical-flow constructed wetland (IVCW) is considered as a potential alternative for domestic wastewater treatment of towns and small cities. Oxygen supply is the main limitation of pollutants removal in IVCWs. In the present study, a field experiment was conducted to evaluate the capacity and kinetics of pollutants removal in IVCWs with/without artificial aeration. Two IVCWs constructed with Canna indica and Phragmites australis were running in continuous flow to remove high concentrations of conventional pollutants and low concentrations of tetracyclines (TETs), which are at similar levels of domestic wastewater. The results showed that IVCWs had a good performance on COD, phosphorus, and TETs with removal efficiencies over 80%, 64%, and 75%, respectively, with a hydraulic retention time (HRT) of 3.0 d. However, the removal of nitrogen was limited, showing as TN removal efficiency of about 30%. The IVCW with Phragmites australis had a higher removal efficiency and rate. A kinetics based on Monod Equation and solved with Matlab 2018a could describe the degradation of conventional pollutants. Artificial aeration improved the oxygen supply and remarkably raised the removal capacity for COD, N, and P in IVCWs. The q_1/2 values, which was defined as the average removal loading before half of the pollutants was removed and represented the removal capacity without limitation of pollutants concentration, were increased by 5-30 times after aeration. In conclusion, IVCWs could remove conventional pollutants and TETs simultaneously showing a great potential in domestic wastewater treatment. Artificial aeration enhanced removal capacity of IVCWs on conventional pollutants while showed little influence on TETs.

Nanotechnology in soil remediation - applications vs. implications

Engineered nanomaterials (ENMs) and nanotechnology have shown great potential in addressing complex problems and creating innovative approaches in soil remediation due to their unique features of high reactivity, selectivity and versatility. Meanwhile, valid concerns exist with regard to their implications towards the terrestrial environment and the ecosystem. This review summarizes: (i) the applications and the corresponding mechanisms of various types of ENMs for soil remediation; (ii) the environmental behavior of ENMs in soils and their interactions with the soil content; (iii) the environmental implications of ENMs during remedial applications. The overall objective is to promote responsible innovations so as to take optimal advantage of ENMs and nanotechnology while minimizing their adverse effects to the ecological system. It is critical to establish sustainable remediation methods that ensure a healthy and safe environment without bringing additional risk.

Stabilization of heavy metal-contaminated soils by biochar: Challenges and recommendations

Various types of biochar have been widely used to remediate soil contamination from heavy metals (HMs) and to reduce HM mobility and bioavailability in soils in recent years. Most researchers have paid attention to the beneficial effects of biochar during the remediation process, but few have emphasized their negative effects and the challenges for their application. In this review, the negative effects and challenges of applying biochar for the remediation of HM-contaminated soils are thoroughly summarized and discussed, including the changeable characteristics of biochar, biochar over-application, toxic substances in biochar, activation of some HMs in soils by biochar, nonspecific adsorption, and the negative influences of biochar on soil microorganisms and plants. In addition, further research directions and several recommendations (standardization, long-term field experiments, mechanisms research and designer biochars) were also proposed to enable the large-scale application of biochar for the remediation of HM-contaminated soils.

Functionalized Mesoporous Silicon Nanomaterials in Inorganic Soil Pollution Research: Opportunities for Soil Protection and Advanced Chemical Imaging

"Innovative actions towards a pollution free-planet" is a goal of the United Nations Environment Assembly (UNEA). Aided by both the Food and Agricultural Organisation (FAO) and its Global Soil Partnership under the 3rd UNEA resolution, a consensus from > 170 countries have agreed a need for accelerated action and collaboration to combat soil pollution. This initiative has been tasked to find new and improved solutions to prevent and reduce soil pollution, and it is in this context that this review provides an updated perspective on an emerging technology platform that has already provided demonstrable utility for measurement, mapping, and monitoring of toxic trace elements (TTEs) in soils, in addition to the entrapment, removal, and remediation of pollutant sources. In this article, the development and characteristics of functionalized mesoporous silica nanomaterials (FMSN) will be discussed and compared with other common metal scavenging materials. The chemistries of the common functionalizations will be reviewed, in addition to providing an outlook on some of the future directions/applications of FMSN. The use of FMSN in soil will be considered with some specific case studies focusing on Hg and As. Finally, the advantages and developments of FMSN in the widely used diffusive gradients-in-thin films (DGT) technique will be discussed, in particular, its advantages as a DGT substrate for integration with oxygen planar optodes in multilayer systems that provide 2D mapping of metal pollutant fluxes at submillimeter resolution, which can be used to measure detailed sediment-water fluxes as well as soil-root interactions, to predict plant uptake and bioavailability.

Compound health risk assessment of cumulative heavy metal exposure: a case study of a village near a battery factory in Henan Province, China

The concentrations of the heavy metals Hg, As, Ni, Pb, Cd, Cr, Cu and Zn in soil, groundwater, air, and locally produced grain (wheat and corn) and vegetables were determined in a village near a battery factory in Xinxiang, Henan Province, China. A multimedia, multipathway health risk assessment of heavy metal exposure was carried out using the health risk model recommended by the United States Environmental Protection Agency (US EPA). The results showed that the concentrations of Cd in soil, Cd and Pb in wheat, Hg in corn, Cd, Hg, and Pb in vegetables, and Cd and As in PM2.5, PM10, and TSP were all higher than the corresponding limits for heavy metals in China. The non-carcinogenic risks (HIs) for all environmental media were higher in children than in adults, and the carcinogenic risks (TCRs) of heavy metal exposure in other media except for soil were higher in adults than in children. The total HI and TCR in adults and children were higher than the standard limit values because of heavy metal exposure through soil, groundwater, PM10, grain and vegetables. Cd was the most significant heavy metal in terms of HI and TCR factors; among the evaluated pathways, the contribution of diet was the largest. The HI and TCR caused by dietary crops account for 96.7% and 98.9% of the total in adults and 90.2% and 96.2% of the total in children, respectively. To maintain the health of the residents in the study area, it is strongly recommended to stop planting edible agricultural products immediately, start buying grain and vegetables from outside the study area, and strictly strengthen the control of heavy metal pollution in the study area. The source apportionment results show that Cd, Ni and As were mainly from industrial sources, which was related to sewage irrigation and battery plant deposition, and Pb and Cr were mainly from agricultural activities.

A porous nano-adsorbent with dual functional groups for selective binding proteins with a low detection limit

Porous nano-adsorbent with dual functional groups for selective binding proteins with a low detection limit.