Study on detoxification and removal mechanisms of hexavalent chromium by microorganisms

Synergistic transformation of Cr(VI) in lubricant degradation by bacterial consortium

In recent years, it has become widely acknowledged that heavy metals are often present in oil-contaminated sites. This study utilized three specific types of microorganisms with different functions to construct a composite bacterial consortium for treating lubricant-Cr(VI) composite pollutants. The selected strains were Lysinbacillus fusiformis and Bacillus tropicus. The Back Propagation Neural Network-genetic algorithm was employed to optimize the secondary bacterial addition time to 67 h and the strain ratio to 2:1. The optimized process involved the use of 4.6 g/L glucose and ammonium oxalate as electron donors. After 6 days of treatment with the composite consortium, the removal rates of 1500 mg/L lubricating oil and 50 mg/L chromium reached 90.3% and 84.2%, respectively. Initial analysis using three-dimensional fluorescence to examine the changes in extracellular polymers in the bacteria when exposed to chromium-lubricating oil, showed that 30 mg/L Cr(VI) could induce the secretion of extracellular protein-like substances. These substances may be directly or indirectly involved in the biological detoxification mechanism of chromium. The synergistic removal of complex pollutants has the potential to transform previous "unilateral" removal studies and enhance bioremediation efficiency.

Myco-remediation of chromium heavy metal from industrial wastewater: A review

Chromium a heavy metal present in the effluent of the industries causes accumulation of toxicity in water. Chromium commonly has Cr (III) and Cr (VI), two oxidation states, in which hexavalent form causes more health issues to human, other species and environment. The increased anthropogenic effects, especially tannery industrial effluent contributes the higher percentage of chromium accumulation. Removal of heavy metal can be attributed to many aspects, conventionally the physio-chemical methods which superseded by biological means of remediation. Chromium resistant microbes can be used to remove metal ions of chromium from the effluent, as this can be considered an eco-friendly approach. The microbial accession of nanoparticles synthesis is being focused, due to its accuracy and specificity in results. Mycoremediation grabbed attention as fungal absorbance efficiency and the surface-mechanism of heavy metal ions correlates each other. Current study in-depth indulges the base to core mechanism of mycoremediation of chromium ions from different effluents. Fungal-assisted mechanism of chromium ions have insists to be fewer, which may gain attention by enhancing the methodology of removal of chromium ions. This study focuses on improvement of fungal strain and pave-way, to improvise the study with immobilization technique which renders usage of the adsorbents redundant usage and applications, substantially with the low-cost polymeric material alginate is given more importance for immobilization technique. Alginate apart from low-cost adsorbent, is an excellent support for fungal producing nanoparticles which would provide wide-cast and an extraordinary adsorbent material.

Modern-Day Green Strategies for the Removal of Chromium from Wastewater

Chromium is an essential element in various industrial processes, including stainless steel production, electroplating, metal finishing, leather tanning, photography, and textile manufacturing. However, it is also a well-documented contaminant of aquatic systems and agricultural land, posing significant economic and health challenges. The hexavalent form of chromium [Cr(VI)] is particularly toxic and carcinogenic, linked to severe health issues such as cancer, kidney disorders, liver failure, and environmental biomagnification. Due to the high risks associated with chromium contamination in potable water, researchers have focused on developing effective removal strategies. Among these strategies, biosorption has emerged as a promising, cost-effective, and energy-efficient method for eliminating toxic metals, especially chromium. This process utilizes agricultural waste, plants, algae, bacteria, fungi, and other biomass as adsorbents, demonstrating substantial potential for the remediation of heavy metals from contaminated environments at minimal cost. This review paper provides a comprehensive analysis of various strategies, materials, and mechanisms involved in the bioremediation of chromium, along with their commercial viability. It also highlights the advantages of biosorption over traditional chemical and physical methods, offering a thorough understanding of its applications and effectiveness.

New insights into the remediation of chromium-contaminated industrial electroplating wastewater by an innovative nano-modified biochar derived from spent mushroom substrate: Mechanisms, batch study, stability and application

To enhance the adsorption and detoxification capabilities of hexavalent chromium (Cr(VI)) using agricultural spent mushroom substrate (SMS), this study pioneered the preparation of biochar (NBC) from Lentinus edodes spent substrate. Subsequently, nano iron sulfide (FeS) particles were integrated onto NBC with carboxymethyl cellulose (CMC) as a stabilizer, resulting in a novel composite biosorption material, nFeS-BC. The adsorption and reduction potential of both NBC and nFeS-BC against Cr(VI) were evaluated through batch experiments, which identified pH as a critical factor influencing adsorption efficiency. Remarkably, nFeS-BC exhibited a superior maximum adsorption capacity (qmax) of 99.57 mg g-1 and a reduction efficiency of 68.65%, outperforming NBC by 277.73% and 211.76% under optimized conditions, respectively. Characterization techniques including Scanning Electron Microscopy-Energy Dispersive X-Ray (SEM-EDX), Fourier Transform Infrared Spectroscopy (FT-IR), and X-ray Photoelectron Spectroscopy (XPS) elucidated the removal mechanisms, predominantly attributed to ion exchange, electrostatic attraction, functional group interaction, and redox reaction. The carbon-oxygen functional groups and nano particles were crucial in the adsorption and reduction processes. Compared with NBC, the incorporation of FeS particles increased the specific surface area and pore volume of nFeS-BC by 130.86% and 183.77%, respectively. nFeS-BC owned a shelf-life of up to ∼3 months of use and exhibited excellent performance in the processing of actual electroplating wastewater with q of 16.71 mg g-1 under 0.1 g L-1 dosage. These findings underscore the potential of nFeS-BC as an efficient material for Cr(VI) removal, presenting a novel adsorbent for the sustainable detoxification of contaminated water resources and the potential for using agricultural waste materials in environmental remediation.

DbGTi protein attenuates chromium (VI)-induced oxidative stress via activation of the Nrf2/HO-1 signalling pathway in zebrafish (Danio rerio) larval model

Hexavalent chromium (Cr (VI)) contamination poses a significant threat to environmental and human health due to its ability to induce oxidative stress. Conventional strategies to counter Cr (VI)-induced oxidative stress, like antioxidants and chelating agents, face efficacy limitations and adverse effects. The present study is intended to counteract the limitations of conventional strategies by introducing a trypsin inhibitor isolated from Dioscorea bulbifera L. tubers, known as DbGTi protein, against Cr (VI)-induced developmental toxicity and oxidative stress. Through a comprehensive array of biochemical assays, behavioural tests, and gene expression analyses, this study interprets the underlying mechanisms of the DbGTi protein. Results demonstrated that the DbGTi protein effectively restored antioxidant defense systems, including superoxide dismutase (SOD), catalase (CAT), glutathione (GSH), glutathione S-transferase (GST), and glutathione peroxidase (GTPx), thereby mitigating cellular damage, reducing cell death, and enhancing neuro-biomarkers. qRT-PCR analysis of mRNA expression profiling revealed the upregulation of genes associated with antioxidant defense (sod, cat, gpx) and defense pathway (nrf2, hmox-1a), further highlighting the protective effects of DbGTi protein against Cr (VI)-induced oxidative stress.

Selective Detection of Divalent Cations (Cu2+, Zn2+, Pb2+) and Anions (SO42-, S2-, CO32-) Using a pH-Sensitive Multi-functional Schiff Base in Neutral Medium

A new Schiff base-based multi-cation/anion probe (L) has been synthesized and characterized using HR-MS, FT-IR, 1H, and 13C NMR techniques. The Schiff base motif provides specific binding sites that detect cations and anions by generating distinct optical output signals upon interaction. A noticeable color change of the probe solution was observed from pale yellow to various shades of yellow upon adding cations such as Cu2+, Zn2+, and Pb2+ and anions such as CO32⁻, S2⁻, and SO42⁻. This color change results from forming complexes like M3L2 with metal ions. Whereas origin of color in presence of anion were attributed due to the deprotonation of acidic proton in the ligand. Moreover, the complexes formed by Zn2+, S2/CO32⁻ ion with L are fluorescent, enabling the detection of Cu2+ and SO42⁻ using the Stern-Volmer plot, with a limit of detection (LODs) of 8.48 µM and 10.47 µM, respectively. Additionally, increasing the pH of the probe solution above 8 reveals a significant enhancement of fluorescence intensity due to the deprotonation of phenolic -OH and amide -NH in the presence of hydroxide ions. This emission in the basic medium is quenched by Cu2+ ions and restored when Cu2+ is complexed with EDTA. A logic gate has also been constructed for understanding the TURN-OFF-TURN-ON mechanism involving Cu2+ ions and EDTA. Overall, the versatile performance of a single probe L opens up new possibilities as a multifunctional sensor, making it highly suitable for practical applications.

Plant endophyte immobilization technology: A promising approach for chromium-contaminated water and soil remediation

Microbial immobilization technology is considered an efficient bioremediation method for chromium (Cr) pollution. However, it is currently unclear which strain is more beneficial for the remediation of Cr-contaminated water and soil. Therefore, corn straw biochar was used as a carrier to prepare materials for fixing the endophytes Serratia sp. Y-13 (BSR1), Serratia nematodiphila (BSR2), Lysinibacillus sp. strain SePC-36 (BLB1), Lysinibacillus mangiferihumi strain WK63 (BLB2) and the commercial bacteria Shewanella oneidensis MR-1 (BSW). The results demonstrated that, compared with BSW, endophyte-loaded biochar (especially BSR1) was more effective at remediating Cr pollution in water and soil. Endophyte-loaded biochar reduced the abundance of soil pathogenic bacteria, enhanced the number of beneficial plant endophytes, reduced the soil Cr(VI) concentration, improved soil fertility, reduced the plant Cr concentration and improved the yield of lettuce. Redundancy analysis (RDA) and structural equation modelling (PLS-PM) suggested that soil microbes are closely related to soil Cr(VI), plant fresh weight and soil organic matter, whereas endophyte-loaded biochar directly influences plant cell motility pathways by altering plant microbes. This study represents a pioneering investigation into the efficacy of endophyte-loaded biochar as a remediation strategy for Cr pollution.

The role and mechanism of Bacillus megaterium strain A14 in inhibiting the cadmium uptake by peanut plants in acidic red soil

AIMS

This study explores the potential of cadmium (Cd)-resistant bacteria, specifically Bacillus megaterium A14, to decrease Cd accumulation in peanuts, a crop susceptible to metal uptake from contaminated soils, by understanding the bacterium's impact on plant Cd absorption mechanisms.

METHODS AND RESULTS

Through pot experiments, we observed that A14 inoculation significantly increased peanut biomass under Cd stress conditions, primarily by immobilizing the metal and reducing its bioavailability. The bacterium effectively changed the distribution of Cd, with a notable 46.53% reduction in the exchangeable fraction, which in turn limited the expression of genes related to Cd transport in peanuts. Additionally, A14 enhanced the plant's antioxidant response, improving its tolerance to stress. Microbial analysis through 16S sequencing demonstrated that A14 inoculation altered the peanut rhizosphere, particularly by increasing populations of Firmicutes and Proteobacteria, which play crucial roles in soil remediation from heavy metals.

CONCLUSION

The A14 strain effectively counters Cd toxicity in peanuts, promoting growth through soil Cd sequestration, root barrier biofilm formation, antioxidant system enhancement, suppression of Cd transport genes, and facilitation of Cd-remediating microorganisms.

Growth-dependent cr(VI) reduction by Alteromonas sp. ORB2 under haloalkaline conditions: toxicity, removal mechanism and effect of heavy metals

Bacterial reduction of hexavalent chromium (VI) to chromium (III) is a sustainable bioremediation approach. However, the Cr(VI) containing wastewaters are often characterized with complex conditions such as high salt, alkaline pH and heavy metals which severely impact the growth and Cr(VI) reduction potential of microorganisms. This study investigated Cr(VI) reduction under complex haloalkaline conditions by an Alteromonas sp. ORB2 isolated from aerobic granular sludge cultivated from the seawater-microbiome. Optimum growth of Alteromonas sp. ORB2 was observed under haloalkaline conditions at 3.5-9.5% NaCl and pH 7-11. The bacterial growth in normal culture conditions (3.5% NaCl; pH 7.6) was not inhibited by 100 mg/l Cr(VI)/ As(V)/ Pb(II), 50 mg/l Cu(II) or 5 mg/l Cd(II). Near complete reduction of 100 mg/l Cr(VI) was achieved within 24 h at 3.5-7.5% NaCl and pH 8-11. Cr(VI) reduction by Alteromonas sp. ORB2 was not inhibited by 100 mg/L As(V), 100 mg/L Pb(II), 50 mg/L Cu(II) or 5 mg/L Cd(II). The bacterial cells grew in the medium with 100 mg/l Cr(VI) contained lower esterase activity and higher reactive oxygen species levels indicating toxicity and oxidative stress. In-spite of toxicity, the cells grew and reduced 100 mg/l Cr(VI) completely within 24 h. Cr(VI) removal from the medium was driven by bacterial reduction to Cr(III) which remained in the complex medium. Cr(VI) reduction was strongly linked to aerobic growth of Alteromonas sp. The Cr(VI) reductase activity of cytosolic protein fraction was pronounced by supplementing with NADPH in vitro assays. This study demonstrated a growth-dependent aerobic Cr(VI) reduction by Alteromonas sp. ORB2 under complex haloalkaline conditions akin to wastewaters.

Electrokinetic bioremediation of trichloroethylene and Cr/As co-contaminated soils with elevated sulfate

Co-contaminants and complex subsurface conditions pose great challenges to site remediation. This study demonstrates the potential of electrokinetic bioremediation (EK-BIO) in treating co-contaminants of chlorinated solvents and heavy metals in low-permeability soils with elevated sulfate. EK-BIO columns were filled with field soils, and were fed by the electrolyte containing 20 mg/L trichloroethylene (TCE), 250 μM Cr(VI), 25 μM As(III), 10 mM lactate, and 10 mM sulfate. A dechlorinating consortium containing Dehalococcoides (Dhc) was injected several times during a 199-d treatment at ∼1 V/cm. Sulfate reduction, Cr/As immobilization, and complete TCE biodechlorination were observed sequentially. EK-BIO facilitated the delivery of lactate, Cr(VI)/As(III), and sulfate to the soils, creating favorable reductive conditions for contaminant removal. Supplementary batch experiments and metagenomic/transcriptomic analysis suggested that sulfate promoted the reductive immobilization of Cr(VI) by generating sulfide species, which subsequently enhanced TCE biodechlorination by alleviating Cr(VI) toxicity. The dechlorinating community displayed a high As(III) tolerance. Metagenomic binning analysis revealed the dechlorinating activity of Dhc and the potential synergistic effects from other bacteria in mitigating heavy metal toxicity. This study justified the feasibility of EK-BIO for co-contaminant treatment and provided mechanistic insights into EK-BIO treatment.

Changes of MRGs and ARGs in Acinetobacter sp. SL-1 used for treatment of Cr(VI)-contaminated wastewater with waste molasses as carbon source

Antibiotic resistance genes (ARGs) may be synergistic selected during bio-treatment of chromium-containing wastewater and causing environmental risks through horizontal transfer. This research explored the impact of self-screening bacterium Acinetobacter sp. SL-1 on the treatment of chromium-containing wastewater under varying environmental conditions. The findings indicated that the optimal Cr(VI) removal conditions were an anaerobic environment, 30 °C temperature, 5 g/L waste molasses, 100 mg/L Cr(VI), pH = 7, and a reaction time of 168 h. Under these conditions, the removal of Cr(VI) reached 99.10 %, however, it also developed cross-resistance to tetracycline, gentamicin, clarithromycin, ofloxacin following exposure to Cr(VI). When decrease Cr(VI) concentration to 50 mg/L at pH of 9 with waste molasses as carbon source, the expression of ARGs was down regulated, which decreased the horizontal transfer possibility of ARGs and minimized the potential environmental pollution risk caused by ARGs. The study ultimately emphasized that the treatment of chromium-containing wastewater with waste molasses in conjunction with SL-1 not only effectively eliminates hexavalent chromium but also mitigates the risk of environmental pollution.

Microbial innovations in chromium remediation: mechanistic insights and diverse applications

The ubiquity of hexavalent chromium (Cr(VI)) from industrial activities poses a critical environmental threat due to its persistence, toxicity and mutagenic potential. Traditional physico-chemical methods for its removal often entail significant environmental drawbacks. Recent advancements in remediation strategies have emphasized nano and bioremediation techniques as promising avenues for cost-effective and efficient Cr(VI) mitigation. Bioremediation harnesses the capabilities of biological agents like microorganisms, and algae to mitigate heavy metal contamination, while nano-remediation employs nanoparticles for adsorption purposes. Various microorganisms, including E. coli, Byssochlamys sp., Pannonibacter phragmitetus, Bacillus, Aspergillus, Trichoderma, Fusarium, and Chlorella utilize bioreduction, biotransformation, biosorption and bioaccumulation mechanisms to convert Cr(VI) to Cr(III). Their adaptability to different environments and integration with nanomaterials enhance microbial activity, offering eco-friendly solutions. The study provides a brief overview of metabolic pathways involved in Cr(VI) bioreduction facilitated by diverse microbial species. Nitroreductase and chromate reductase enzymes play key roles in nitrogen and chromium removal, with nitroreductase requiring nitrate and NADPH/NADH, while the chromium reductase pathway relies solely on NADPH/NADH. This review investigates the various anthropogenic activities contributing to Cr(VI) emissions and evaluates the efficacy of conventional, nano-remediation, and bioremediation approaches in curbing Cr(VI) concentrations. Additionally, it scrutinizes the mechanisms underlying nano-remediation techniques for a deeper understanding of the remediation process. It identifies research gaps and offers insights into future directions aimed at enhancing the real-time applicability of bioremediation methods for mitigating with Cr(VI) pollution and pave the way for sustainable remediation solutions.

Recent advances in enhanced technology of Cr(VI) bioreduction in aqueous condition: A review

Due to the extensive application of chromate in industry, chromium-contaminated water has emerged as a significant hidden danger that threatens human health and the safety of the ecological environment. The reduction of Cr(VI) to Cr(III) through microbial processes has become one of the most notable methods for remediating water polluted by chromium due to its economic efficiency and environmentally friendly nature. However, several issues persist in its practical application, such as low reduction rates, the need for additional nutrients, and challenges in solid-liquid separation. Therefore, there is a growing focus on seeking enhanced methods for Cr(VI) microbial reduction, which has become a key area of research. This review represents the initial effort to systematically classify and summarize the means of enhancing Cr(VI) microbial reduction. It categorizes the enhancement methods into two main approaches: microbial-based and multi-method combined enhancement, offering detailed explanations for their mechanisms. This research provides both inspiration and theoretical support for the practical implementation of the Cr(VI) microbial reduction method.

Genome analysis of Shewanella putrefaciens 4H revealing the potential mechanisms for the chromium remediation

Microbial remediation of heavy metal polluted environment is ecofriendly and cost effective. Therefore, in the present study, Shewanella putrefaciens stain 4H was previously isolated by our group from the activated sludge of secondary sedimentation tank in a dyeing wastewater treatment plant. The bacterium was able to reduce chromate effectively. The strains showed significant ability to reduce Cr(VI) in the pH range of 8.0 to 10.0 (optimum pH 9.0) and 25-42 ℃ (optimum 30 ℃) and were able to reduce 300 mg/L of Cr(VI) in 72 h under parthenogenetic anaerobic conditions. In this paper, the complete genome sequence was obtained by Nanopore sequencing technology and analyzed chromium metabolism-related genes by comparative genomics The genomic sequence of S. putrefaciens 4H has a length of 4,631,110 bp with a G + C content of 44.66% and contains 4015 protein-coding genes and 3223,  2414, 2343 genes were correspondingly annotated into the COG, KEGG, and GO databases. The qRT-PCR analysis showed that the expression of chrA, mtrC, and undA genes was up-regulated under Cr(VI) stress. This study explores the Chromium Metabolism-Related Genes of S. putrefaciens 4H and will help to deepen our understanding of the mechanisms of Cr(VI) tolerance and reduction in this strain, thus contributing to the better application of S. putrefaciens 4H in the field of remediation of chromium-contaminated environments.

Mitigating chromium toxicity in rice (Oryza sativa L.) via ABA and 6-BAP: Unveiling synergistic benefits on morphophysiological traits and ASA-GSH cycle

In recent years, the use of plant hormones, such as abscisic acid (ABA) and 6-benzylaminopurine (6-BAP), has gained significant attention for their role in mitigating abiotic stresses across various plant species. These hormones have been shown to play a vital role in enhancing the ascorbate-glutathione cycle and eliciting a wide range of plant growth and biomass, photosynthetic efficiency, oxidative stress and response of antioxidants and other physiological responses. While previous research has been conducted on the individual impact of ABA and 6-BAP in metal stress resistance among various crop species, their combined effects in the context of heavy metal-stressed conditions remain underexplored. The current investigation is to assess the beneficial effects of single and combined ABA (5 and 10 μM L-1) and 6-BAP (5 and 10 μM L-1) applications in rice (Oryza sativa L.) cultivated in chromium (Cr)-contaminated soil (100 μM). Our results showed that the Cr toxicity in the soil showed a significant declined in the growth, gas exchange attributes, sugars, AsA-GSH cycle, cellular fractionation, proline metabolism in O. sativa. However, Cr toxicity significantly increased oxidative stress biomarkers, organic acids, enzymatic and non-enzymatic antioxidants including their gene expression in O. sativa seedlings. Although, the application of ABA and 6-BAP showed a significant increase in the plant growth and biomass, gas exchange characteristics, enzymatic and non-enzymatic compounds and their gene expression and also decreased the oxidative stress, And Cr uptake. In addition, individual or combined application of ABA and 6-BAP enhanced the cellular fractionation and decreases the proline metabolism and AsA-GSH cycle in rice plants. These results open new insights for sustainable agriculture practices and hold immense promise in addressing the pressing challenges of heavy metal contamination in agricultural soils.

Bioremediation of Cr(VI) using indigenous bacterial strains isolated from a common industrial effluent treatment plant in Vishakhapatnam

The present study focuses on removing hexavalent chromium (Cr(VI)) using indigenous metal-resistant bacterial strains isolated from a common industrial effluent treatment plant, a contaminated site in Vishakhapatnam. Three high metal-resistant isolates were screened by growing them in nutrient agar media containing different Cr(VI) concentrations for 24 h at 35 ± 2 °C. The three strains' minimum inhibitory concentrations of Cr(VI) were examined at neutral pH and 35 ± 2 °C temperature. Morphological, biochemical, and molecular characterizations were carried out, and the strains were identified as Bacillus subtilis NITSP1, Rhizobium pusense NITSP2, and Pseudomonas aeruginosa NITSP3. Elemental composition and functional group analysis of the native and metal-loaded cells were done using energy-dispersive spectroscopy and Fourier-transform infrared spectroscopy, respectively. The operating conditions were optimized using a one-factor-at-a-time analysis. When compared with three bacterial isolates, maximum Cr(VI) removal (80.194 ± 4.0%) was observed with Bacillus subtilis NITSP1 with an initial Cr(VI) concentration of 60 mg/L, pH 7.0, an inoculum size of 2% (v/v), and an incubation period of 24 h. The logistic model was used to predict the variation of biomass growth with time. The present study can be extended to remove heavy metals from industrial wastewater in an environmental-friendly manner.

Remediation materials for the immobilization of hexavalent chromium in contaminated soil: Preparation, applications, and mechanisms

Hexavalent chromium is a toxic metal that can induce severe chromium contamination of soil, posing a potential risk to human health and ecosystems. In recent years, the immobilization of Cr(VI) using remediation materials including inorganic materials, organic materials, microbial agents, and composites has exhibited great potential in remediating Cr(VI)-contaminated soil owing to the environmental-friendliness, short period, simple operation, low cost, applicability on an industrial scale, and high efficiency of these materials. Therefore, a systematical summary of the current progress on various remediation materials is essential. This work introduces the production (sources) of remediation materials and examines their characteristics in detail. Additionally, a critical summary of recent research on the utilization of remediation materials for the stabilization of Cr(VI) in the soil is provided, together with an evaluation of their remediation efficiencies toward Cr(VI). The influences of remediation material applications on soil physicochemical properties, microbial community structure, and plant growth are summarized. The immobilization mechanisms of remediation materials toward Cr(VI) in the soil are illuminated. Importantly, this study evaluates the feasibility of each remediation material application for Cr(VI) remediation. The latest knowledge on the development of remediation materials for the immobilization of Cr(VI) in the soil is also presented. Overall, this review will provide a reference for the development of remediation materials and their application in remediating Cr(VI)-contaminated soil.

Facilitating New Chromium Reducing Microbes to Enhance Hexavalent Chromium Reduction by In Situ Sonoporation-Mediated Gene Transfer in Soils

Chromium (Cr) is a heavy metal with a high toxicity and pathogenicity. Microbial reduction is an effective strategy to remove Cr(VI) at contaminated sites but suffers from the low populations and activities of Cr-reducing microorganisms in soils. This study proposed an in situ sonoporation-mediated gene transfer approach, which improved soil Cr(VI) reduction performance by delivering exogenous Cr-transporter chrA genes and Cr-reducing yieF genes into soil microorganisms with the aid of ultrasound. Besides the increasing populations of Cr-resistant bacteria and elevated copy numbers of chrA and yieF genes after sonoporation-mediated gene transfer, three new Cr-reducing strains were isolated, among which Comamonas aquatica was confirmed to obtain Cr-resistant capability. In addition, sonoporation-mediated gene transfer was the main driving force significantly shaping soil microbial communities owing to the predominance of Cr-resistant microbes. This study pioneered and evidenced that in situ soil sonoporation-mediated gene transfer could effectively deliver functional genes into soil indigenous microbes to facilitate microbial functions for enhanced bioremediation, e.g., Cr-reduction in this study, showing its feasibility as a chemically green and sustainable remediation strategy for heavy metal contaminated sites.

Symbiotic hemolymph bacteria reduce hexavalent chromium to protect the host from chromium toxicity in Procambarus clarkii

Hexavalent chromium (Cr(VI)) is a cytotoxic heavy metal pollutant that adversely affects all life forms. Interestingly, the crustacean Procambarus clarkii exhibits a relatively high tolerance to heavy metals. The underlying mechanisms remain unclear. In this study, we investigated the role of symbiotic bacteria in P. clarkii in alleviating Cr(VI)-induced damage and explored their potential mechanisms of action. Through transcriptomic analysis, we observed that Cr(VI) activated P. clarkii's antimicrobial immune responses and altered the bacterial composition in the hemolymph. After antibiotic treatment to reduce bacterial populations, Cr(VI)-induced intestinal and liver damage worsened, and crayfish exhibited lower levels of GSH/CAT/SOD activity. The Exiguobacterium, the symbiotic bacteria in the hemolymph of P. clarkii, were proved to be primary contributor to Cr(VI) tolerance. Further investigation suggested that it resists Cr(VI) through the activation of the ABC transporter system and the reduction of Cr(VI) via the reductase gene nfsA. To validate the role of Exiguobacterium in Cr(VI) tolerance, crayfish treated with antibiotics then supplemented with Exiguobacterium H6 and recombinant E. coli (with the nfsA gene), reduced Cr(VI)-induced ovarian damage. Overall, this study revealed that the symbiotic bacteria Exiguobacterium can absorb and reduce hexavalent chromium, mitigating Cr(VI)-induced damage in P. clarkii. These findings provide new insights into hexavalent chromium tolerance mechanisms in crustaceans.

Linking groundwater microbiome and functional ecological clusters to geogenic high hexavalent chromium from deep aquifers in a loess plateau

Geogenic high hexavalent chromium [Cr(Ⅵ)] in groundwater is a global environmental problem. However, the groundwater microbiome and its linkage to geogenic high Cr(Ⅵ) from deep aquifers still need to be elucidated. Here, we evaluated geogenic Cr(Ⅵ), groundwater microbiome with featured functional ecological clusters and their interactive responses in groundwater from a deep aquifer in a loess plateau of Northern Shaanxi, China. We found that the compositions and structures of microbial communities in groundwater from the deep aquifer were significantly different between low Cr(Ⅵ) (LCG, < 50 μg/L) and high Cr(Ⅵ) groundwater (HCG, > 50 μg/L), with higher microbial diversity and richness in HCG (p < 0.05). Functional "specialists" related to Cr biotransformation, including Cr(Ⅵ) reducing bacteria (CRB) Rhodococcus, Nocardioides, Novosphingobium, and Acidovorax and Mn-oxidizing bacteria (MnOB) Sphingobium, and Ralstonia were positively correlated to total Cr and Cr(VI) concentrations in groundwater. Moreover, these CRB and MnOB were dominant in high Cr(VI) groundwater and associated by strong interspecific relation in an ecological cluster (p < 0.05), suggesting their indicator roles for high Cr(Ⅵ) and the contribution of MnOB mediated Cr(III) oxidation to Cr(VI) enrichment. RDA and path analysis further revealed that the geogenic Cr(Ⅵ) directly promoted the key Cr-related functional cluster with the groundwater depth, dissolved oxygen, and total dissolved solids as the cofactors indirectly influencing Cr(Ⅵ) and the functional clusters (p < 0.05). Collectively, our results highlight the significant roles of microbial ecological clusters especially functional "specialists" MnOB and CRB in groundwater Cr(Ⅵ) from deep aquifers in the loess plateau and provide a basis for sustainable management of high Cr(Ⅵ) groundwater.

A review on chromium health hazards and molecular mechanism of chromium bioremediation

Living beings have been devastated by environmental pollution, which has reached its peak. The disastrous pollution of the environment is in large part due to industrial wastes containing toxic pollutants. The widespread use of chromium (Cr (III)/Cr (VI)) in industries, especially tanneries, makes it one of the most dangerous environmental pollutants. Chromium pollution is widespread due to ineffective treatment methods. Bioremediation of chromium (Cr) using bacteria is very thoughtful due to its eco-friendly and cost-effective outcome. In order to counter chromium toxicity, bacteria have numerous mechanisms, such as the ability to absorb, reduce, efflux, or accumulate the metal. In this review article, we focused on chromium toxicity on human and environmental health as well as its bioremediation mechanism.

Enhancing chromium removal and recovery from industrial wastewater using sustainable and efficient nanomaterial: A review

Water contamination can be detrimental to the human health due to higher concentration of carcinogenic heavy metals such as chromium (Cr) in the wastewater. Many traditional methods are being employed in wastewater treatment plants for Cr removal to control the environmental impacts. Such methods include ion exchange, coagulation, membrane filtration, and chemical precipitation and microbial degradation. Recent advances in materials science and green chemistry have led to the development of nanomaterial that possess high specific surface areas and multiple functions, making them suitable for removing metals such as Cr from wastewater. Literature shows that the most efficient, effective, clean, and long-lasting approach for removing heavy metals from wastewater involves adsorbing heavy metals onto the surface of nanomaterial. This review assesses the removal methods of Cr from wastewater, advantages and disadvantages of using nanomaterial to remove Cr from wastewater and potential negative impacts on human health. The latest trends and developments in Cr removal strategies using nanomaterial adsorption are also explored in the present review.

Chromium Recovery from Chromium-Loaded Cupressus lusitanica Bark in Two-Stage Desorption Processes

Hexavalent chromium (Cr(VI)) contamination poses serious health and environmental risks. Chromium biosorption has been employed as an effective means of eradicating Cr(VI) contamination. However, research on chromium desorption from chromium-loaded biosorbents is scarce despite its importance in facilitating industrial-scale chromium biosorption. In this study, single- and two-stage chromium desorption from chromium-loaded Cupressus lusitanica bark (CLB) was conducted. Thirty eluent solutions were evaluated first; the highest single-stage chromium desorption efficiencies were achieved when eluent solutions of 0.5 M NaOH, 0.5 M H2SO4, and 0.5 M H2C2O4 were used. Subsequently, two-stage kinetic studies of chromium desorption were performed. The results revealed that using 0.5 M NaOH solution in the first stage and 0.5 M H2C2O4 in the second stage enabled the recovery of almost all the chromium initially bound to CLB (desorption efficiency = 95.9-96.1%) within long (168 h) and short (3 h) desorption periods at each stage. This study clearly demonstrated that the oxidation state of the recovered chromium depends on the chemical nature and concentration of the eluent solution. The results suggest the possible regeneration of chromium-loaded CLB for its subsequent use in other biosorption/desorption cycles.

Cleanup of Cr(VI)-polluted groundwater using immobilized bacterial consortia via bioreduction mechanisms

Cr(VI) bioreduction has become a remedial alternative for Cr(VI)-polluted site cleanup. However, lack of appropriate Cr(VI)-bioreducing bacteria limit the field application of the in situ bioremediation process. In this study, two different immobilized Cr(VI)-bioreducing bacterial consortia using novel immobilization agents have been developed for Cr(VI)-polluted groundwater remediation: (1) granular activated carbon (GAC) + silica gel + Cr(VI)-bioreducing bacterial consortia (GSIB), and (2) GAC + sodium alginate (SA) + polyvinyl alcohol (PVA) + Cr(VI)-bioreducing bacterial consortia (GSPB). Moreover, two unique substrates [carbon-based agent (CBA) and emulsified polycolloid substrate (EPS)] were developed and used as the carbon sources for Cr(VI) bioreduction enhancement. The microbial diversity, dominant Cr-bioreducing bacteria, and changes of Cr(VI)-reducing genes (nsfA, yieF, and chrR) were analyzed to assess the effectiveness of Cr(VI) bioreduction. Approximately 99% of Cr(VI) could be bioreduced in microcosms with GSIB and CBA addition after 70 days of operation, which caused increased populations of total bacteria, nsfA, yieF, and chrR from 2.9 × 10⁸ to 2.1 × 10¹², 4.2 × 10⁴ to 6.3 × 10¹¹, 4.8 × 10⁴ to 2 × 10¹¹, and 6.9 × 10⁴ to 3.7 × 10⁷ gene copies/L. In microcosms with CBA and suspended bacteria addition (without bacterial immobilization), the Cr(VI) reduction efficiency dropped to 60.3%, indicating that immobilized Cr-bioreducing bacteria supplement could enhance Cr(VI) bioreduction. Supplement of GSPB led to a declined bacterial growth due to the cracking of the materials. The addition of GSIB and CBA could establish a reduced condition, which favored the growth of Cr(VI)-reducing bacteria. The Cr(VI) bioreduction efficiency could be significantly improved through adsorption and bioreduction mechanisms, and production of Cr(OH)₃ precipitates confirmed the occurrence of Cr(VI) reduction. The main Cr-bioreducing bacteria included Trichococcus, Escherichia-Shigella, and Lactobacillus. Results suggest that the developed GSIB bioremedial system could be applied to cleanup Cr(VI)-polluted groundwater effectively.

Sequestration and oxidation of heavy metals mediated by Mn(II) oxidizing microorganisms in the aquatic environment

Microorganisms can oxidize Mn(II) to biogenic Mn oxides (BioMnOx), through enzyme-mediated processes and non-enzyme-mediated processes, which are generally considered as the source and sink of heavy metals due to highly reactive to sequestrate and oxidize heavy metals. Hence, the summary of interactions between Mn(II) oxidizing microorganisms (MnOM) and heavy metals is benefit for further work on microbial-mediated self-purification of water bodies. This review comprehensively summarizes the interactions between MnOM and heavy metals. The processes of BioMnOx production by MnOM has been firstly discussed. Moreover, the interactions between BioMnOx and various heavy metals are critically discussed. On the one hand, modes for heavy metals adsorbed on BioMnOx are summarized, such as electrostatic attraction, oxidative precipitation, ion exchange, surface complexation, and autocatalytic oxidation. On the other hand, adsorption and oxidation of representative heavy metals based on BioMnOx/Mn(II) are also discussed. Thirdly, the interactions between MnOM and heavy metals are also focused on. Finally, several perspectives which will contribute to future research are proposed. This review provides insight into the sequestration and oxidation of heavy metals mediated by Mn(II) oxidizing microorganisms. It might be helpful to understand the geochemical fate of heavy metals in the aquatic environment and the process of microbial-mediated water self-purification.

Enhanced detoxification of Cr6+ by Shewanella oneidensis via adsorption on spherical and flower-like manganese ferrite nanostructures

Maximizing the safe removal of hexavalent chromium (Cr6+) from waste streams is an increasing demand due to the environmental, economic and health benefits. The integrated adsorption and bio-reduction method can be applied for the elimination of the highly toxic Cr6+ and its detoxification. This work describes a synthetic method for achieving the best chemical composition of spherical and flower-like manganese ferrite (MnxFe3-xO4) nanostructures (NS) for Cr6+ adsorption. We selected NS with the highest adsorption performance to study its efficiency in the extracellular reduction of Cr6+ into a trivalent state (Cr3+) by Shewanella oneidensis (S. oneidensis) MR-1. MnxFe3-xO4 NS were prepared by a polyol solvothermal synthesis process. They were characterised by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectrometry (XPS), dynamic light scattering (DLS) and Fourier transform-infrared (FTIR) spectroscopy. The elemental composition of MnxFe3-xO4 was evaluated by inductively coupled plasma atomic emission spectroscopy. Our results reveal that the oxidation state of the manganese precursor significantly affects the Cr6+ adsorption efficiency of MnxFe3-xO4 NS. The best adsorption capacity for Cr6+ is 16.8 ± 1.6 mg Cr6+/g by the spherical Mn0.22+Fe2.83+O4 nanoparticles at pH 7, which is 1.4 times higher than that of Mn0.8Fe2.2O4 nanoflowers. This was attributed to the relative excess of divalent manganese in Mn0.22+Fe2.83+O4 based on our XPS analysis. The lethal concentration of Cr6+ for S. oneidensis MR-1 was 60 mg L-1 (determined by flow cytometry). The addition of Mn0.22+Fe2.83+O4 nanoparticles to S. oneidensis MR-1 enhanced the bio-reduction of Cr6+ 2.66 times compared to the presence of the bacteria alone. This work provides a cost-effective method for the removal of Cr6+ with a minimum amount of sludge production.

Biogeochemical behaviour and toxicology of chromium in the soil-water-human nexus: A review

Chromium (Cr) affects human health if it accumulates in organs to elevated concentrations. The toxicity risk of Cr in the ecosphere depends upon the dominant Cr species and their bioavailability in the lithosphere, hydrosphere, and biosphere. However, the soil-water-human nexus that controls the biogeochemical behaviour of Cr and its potential toxicity is not fully understood. This paper synthesizes information on different dimensions of Cr ecotoxicological hazards in the soil and water and their subsequent effects on human health. The various routes of environmental exposure of Cr to humans and other organisms are also discussed. Human exposure to Cr(VI) causes both carcinogenic and non-carcinogenic health effects via complicated reactions that include oxidative stress, chromosomal and DNA damage, and mutagenesis. Chromium (VI) inhalation can cause lung cancer; however, incidences of other types of cancer following Cr(VI) exposure are low but probable. The non-carcinogenic health consequences of Cr(VI) exposure are primarily respiratory and cutaneous. Research on the biogeochemical behaviour of Cr and its toxicological hazards on human and other biological routes is therefore urgently needed to develop a holistic approach to understanding the soil-water-human nexus that controls the toxicological hazards of Cr and its detoxification.

Biosynthesis, characterization, and determination of trace hydrogen peroxide of Organo-Cr(III) nanoparticles by Lysinibacillus sp. 4H

The mechanism of microbial reduction of Cr(VI) has been widely reported; however, only a few studies have focused on Cr(VI) reduction products. In this study, a green synthetic pathway for the biosynthesis of Organo-Cr(III) nanoparticles using Lysinibacillus sp. 4H was investigated, and some properties of these nanoparticles were characterized, based on analysis using X-ray photoelectron spectroscopy, electron paramagnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and scanning electron microscopy, among other techniques. The analyses revealed that the reduction product induced by Lysinibacillus sp. 4H may be amorphous Organo-Cr(III) nanoparticles with an irregular spherical structure (20–90 nm). Thermal characterization of the nanoparticles showed that they maintain a high residual mass (50.45%) at 700 °C, indicating high stability. In addition, the nanoparticles were capable of detecting trace amounts of hydrogen peroxide (H2O2), owing to their redox properties, such that the corresponding H2O2 concentrations could be accurately determined in a range of concentrations. This study provided novel insights and strategies regarding the use of nanoparticles to detect trace hydrogen peroxide concentrations in multiple fields.

Preliminary assessment of microbial mats in seawater metal remediation

Microbial mats have a special role in the removal of metals in marine environment. This study aimed to experimentally determine the efficiency of Cr removal from seawater by microbial mats. The effect of Cr on the microphytobenthic community and the influence of an aerated condition on the removal of metal and microorganisms were also considered. Hence, microbial mat samples were subdivided in 4 groups: submerged in Cr (chromium 2 mg/L without aeration), Cr + O₂ (chromium 2 mg/L with aeration), SW + O₂ (filtered seawater with aeration), and a control: SW (filtered seawater with neither chromium nor aeration). Water and microbial mat subsamples were used to determine Cr concentrations, organic matter content, granulometry, physicochemical parameters, chlorophyll a, phaeopigments, and quantitative analysis of the microphytobenthic community. Cr removal efficiency from seawater was 95% for the Cr treatment and 99% for the Cr + O₂ treatment. The abundance of cyanobacteria tended to decrease between the initial and final days of the assay, whereas the opposite trend was observed for diatoms. Two aspects are worth noting in the paper: microbial mats efficiently removed Cr from seawater at a concentration of 2 mg Cr/L and the removal of Cr by microbial mats was more efficient with water aeration.

Introducing heterotrophic iron ore bacteria as new candidates in promoting the recovery of e-waste strategic metals

Electrical instruments are an integral part of human life resulting in a vast electronic waste generation (74.7 Mt by 2030), threatening human life and the environment due to its hazardous nature. Therefore, proper e-waste management is a necessity. Currently, bio-metallurgy is a sustainable process and an emerging research field. Simultaneous leaching of metals using two groups of indigenous heterotrophs and autotrophs was an exciting work done in this study. Bioleaching experiments using pre-adapted cultures were investigated at three e-waste densities: 5, 10, and 15 g/L. Statistical analysis was done using two-way ANOVA. Copper (93%), zinc (21.5%), and nickel (10.5%) had the highest recovery efficiencies. There was a significant difference between copper, nickel, tin, and zinc concentrations and the bacterial group (P < 0.05); Iron-oxidizing bacteria showed the most weight decrease and recovered 46-47% of total metals, mainly copper and nickel, while sulfur oxidizers were more capable of zinc leaching. The heterotrophs solubilized tin preferably and substantially decreased e-waste weight. Using heterotrophs alongside autotrophs is proposed to promote metal recovery.

Biosorption of Hexavalent Chromium by Bacillus megaterium and Rhodotorula sp. Inactivated Biomass

Due to the adverse effects of hexavalent chromium (Cr6+) on human health and the quality of the environment, the scientific community has invested a lot of effort to solve this pollution problem. Thus, implementing sustainable alternatives for Cr6+ elimination by exploiting the capacity of microbial biomass to retain heavy metals by biosorption is considered an economic and eco-friendly solution, compared to the conventional physico-chemical processes. However, the ability of microorganisms to remove Cr6+ from liquid effluents can strongly be affected by biotic and abiotic factors. With these issues in mind, the main purpose of this paper was to investigate Cr6+ biosorption on Bacillus megaterium and Rhodotorula sp. biomass inactivated by thermal treatments, exploring the effects of some factors such as: pH, biosorbent dose, initial concentration of the metal in solution, temperature and contact time between the biosorbent and the metal ions on process effectiveness. The results showed that Cr6+ removal by biosorption on the selected microorganisms was strongly influenced by the pH of the solution which contains chromium, the reduction being the principal mechanism involved in hexavalent chromium biosorption. Equilibrium and kinetic studies were also performed, together with SEM-EDX and FTIR spectra, to explain the mechanisms of the biosorption process on the selected biomasses. Maximum uptake capacities of 34.80 mg/g biosorbent and 47.70 mg/g biosorbent were achieved by Bacillus megaterium and Rhodotorula sp., respectively, at pH 1, biosorbent dosage of 8 g/L, 25 °C, after a contact time of 48 h and an initial Cr6+ concentration in solution of 402.52 mg/L. The experimental results showed that Cr6+ biosorption by selected microorganisms followed the Elovich model, the values of the correlation coefficients being 0.9868 and 0.9887, respectively. The Freundlich isotherm model best describes the Cr6+ biosorption by Bacillus megaterium and Rhodotorula sp., indicating that a multilayer biosorption mainly controls the process and is conducted on heterogeneous surfaces with uniformly distributed energy.

Tea saponin enhanced bioleaching of Fusarium solani to remove hexavalent chromium from soil

Hexavalent chromium pollution is one of the most serious types of site pollution. In this study, a microorganism was screened to remove most hexavalent chromium from soil by leaching in 24 h. After ITS sequencing, the microorganism was identified as belonging to the genus Fusarium solani. The optimization experiment of leaching conditions determined that the removal rate reached the maximum 80% when the rotation speed was 200 rpm, the liquid-soil ratio was 15:1, the temperature was 35℃, and the pH was 7. The study has also shown that tea saponin can effectively strengthen the leaching of Fusarium solani to remove hexavalent chromium from the soil. Compared with tea saponin, the strengthening effect of glucose and rhamnolipid was relatively small. The removal rate of hexavalent chromium reached 85% when the added amount of tea saponin was 0.02 g/mL. The leaching solution destroyed part of the iron-manganese nodule structure of the soil, and its hydroxyl, carboxyl, and other groups complexed metal ions into the solution to achieve the purpose of removing hexavalent chromium. However, since the main crystal of the soil was SiO₂, there was no obvious change in the XRD of the soil. Toxicity test showed that after leaching, the content of hexavalent chromium leached was 0.28 mg/L (< 1.5 mg/L), which meet the entry standard of the landfill site.

Sensitivity of Zea mays and Soil Microorganisms to the Toxic Effect of Chromium (VI)

Chromium is used in many settings, and hence, it can easily enter the natural environment. It exists in several oxidation states. In soil, depending on its oxidation-reduction potential, it can occur in bivalent, trivalent or hexavalent forms. Hexavalent chromium compounds are cancerogenic to humans. The aim of this study was to determine the effect of Cr(VI) on the structure of bacteria and fungi in soil, to find out how this effect is modified by humic acids and to determine the response of Zea mays to this form of chromium. A pot experiment was conducted to answer the above questions. Zea mays was sown in natural soil and soil polluted with Cr(VI) in an amount of 60 mg kg-1 d.m. Both soils were treated with humic acids in the form of HumiAgra preparation. The ecophysiological and genetic diversity of bacteria and fungi was assayed in soil under maize (not sown with Zea mays). In addition, the following were determined: yield of maize, greenness index, index of tolerance to chromium, translocation index and accumulation of chromium in the plant. It has been determined that Cr(VI) significantly distorts the growth and development of Zea mays, while humic acids completely neutralize its toxic effect on the plant. This element had an adverse effect on the development of bacteria of the genera Cellulosimicrobium, Kaistobacter, Rhodanobacter, Rhodoplanes and Nocardioides and fungi of the genera Chaetomium and Humicola. Soil contamination with Cr(VI) significantly diminished the genetic diversity and richness of bacteria and the ecophysiological diversity of fungi. The negative impact of Cr(VI) on the diversity of bacteria and fungi was mollified by Zea mays and the application of humic acids.

A critical review of microplastic degradation and material flow analysis towards a circular economy

The resilience and low cost of plastics has made their usage ubiquitous, but is also the cause of their prevalence and longevity as waste. Plastic pollution has become a great concern to the health and wellbeing of ecosystems around the world; microplastics are a particular threat, due to their high mobility, ease of ingestion by wildlife, and ability to adsorb and carry toxic contaminants. Material flow analysis has been widely applied to examine stocks and flows of materials in other industries, and has more recently been applied to plastics to examine areas where waste can reach the environment. However, while much research has gone into the environmental fate of microplastics, degradation strategies have been a lesser focus, and material flow analysis of microplastics has suffered from lack of data. Furthermore, the variety of plastics, their additives, and any contaminants pose a significant challenge in degrading (and not merely fragmenting) microplastic particles. This review discusses the current degradation strategies and solutions for dealing with existing and newly-generated microplastic waste along with examining the status of microplastics-based material flow analysis, which are critical for evaluating the possibility of incorporating microplastic waste into a circular economy. The degradation strategies are critically examined, identifying challenges and current trends, as well as important considerations that are frequently under-reported. An emphasis is placed on identifying missing data or information in both material flow analysis and degradation methods that could prove crucial in improving understanding of microplastic flows, as well as optimizing degradation strategies and minimizing any negative environmental impact.

Simultaneous removal of ternary heavy metal ions by a newly isolated Microbacterium paraoxydans strain VSVM IIT(BHU) from coal washery effluent

In the present work, the removal of Cr (VI), Cd (II) and Pb (II) at 50 mg/L of each metal ion concentration was investigated by Microbacterium paraoxydans strain VSVM IIT(BHU). The heavy metal binding on the bacterial cell surface was confirmed through X-ray photoelectron spectroscopy and energy dispersive X-ray. X-ray photoelectron spectroscopy analysis also confirmed the reduction of Cr (VI) to Cr (III). Heavy metal removal dynamics was investigated by evaluating dimensionless, and the value of N_k (9.49 × 10^-3, 9.92 × 10^-3 and 1.23 × 10^-2 for Cr (VI), Cd (II) and Pb (II) ions) indicated that the removal of heavy metals by bacterial isolate was mixed diffusion and transfer controlled. It was found that both the experimental and predicted values for isolated bacterial strain coincided with each other with a good R² value in the L-M Algorithm range of 0.94-0.98 for the ternary metal ion system. The bacterial isolate presented a maximum heavy metal ion removal efficiency of 91.62% Cr (VI), 89.29% Pb (II), and 83.29% Cd (II) at 50 mg/L.

Study on the effect of Cr(VI) removal by stimulating indigenous microorganisms using molasses

Molasses have a prominent effect on the bioremediation of Cr(VI) contaminated groundwater. However, its reaction mechanism is not detailed. In this paper, the removal of Cr(VI) with different carbon sources was compared to explore the effect and mechanism of the molasses. The addition of molasses can completely remove 25 mg/L Cr(VI), while the removal efficiency by glucose or emulsified vegetable oil was only 20%. Molasses could rapidly stimulate the reduction of Cr(VI) by indigenous microorganisms and weakened the toxicity on bacteria. The average removal rate of Cr(VI) was 0.42 mg/L·h, 10 times that of glucose system. Compared with glucose, molasses can remediate Cr(VI) at a higher concentration (50 mg/L), and the carbohydrate acted as microbial nutrients. Direct and indirect reduction acted together, the Fe(II) content in the aquifer medium increased from 1.7% to 4.7%. The addition of molasses extract into glucose system could increased the removal rate of Cr(VI) by 2-3 times, and the ions of molasses had no significant effect on the reduction. Excitation emission matrix fluorescence spectra and electrochemical analysis proved that the molasses contained humic acid-like substances, which had the ability of electron shuttle and improved the reduction rate of Cr(VI). In the process of bioreduction, the composition of molasses changed and the electron transport capacity increased from 104.2 to 446.5 μmol/(g C), but these substances could not be used as electron transport media to continuously enhance the reduction effect. This study is of great significance to fully understand the role and application of molasses.

Effect of synthetic fatty liquor and neatsfoot oil as co-contaminants on the reduction of hexavalent chromium using Fusarium oxysporum and its kinetic study

The hexavalent chromium is one of the major carcinogenic components released during the tanning process and lots of work have been carried out on the reduction of hexavalent chromium via chemical and biological routes. Different fatty oils are also employed in the tanning process and have also been released as an effluent along with chromium. However, it is difficult to find a study on the reduction of chromium in the presence of other contaminant which would help to mimic the real-time complication of treating the tannery effluent. It is the first attempt on the reduction of hexavalent chromium in the presence of synthetic fatty liquor and neatsfoot oil using Fusarium oxysporum. The maximum percentage of chromium reduction was 73.62% and 60.28% in neatsfoot oil and synthetic fatty oil, respectively, for the initial chromium concentration of 25 mg/L. The biomass productivity was better with both neatsfoot oil and synthetic fatty oil, whereas the same has decreased with the presence of chromium. The reduction of chromium was found to follow the uncompetitive substrate inhibition kinetics than the general Michaelis-Menten kinetics. The kinetic parameters were calculated using particle swarm optimization algorithm, which were compared with the already reported data. The uncompetitive substrate inhibition kinetics was represented the experimental data in both the cases and the value of substrate inhibition constant was low in the case of neatsfoot oil compared with the synthetic fatty liquor.

Widespread bacterial responses and their mechanism of bacterial metallogenic detoxification under high concentrations of heavy metals

Microbial mineralization is increasingly used in bioremediation of heavy metal pollution, but better mechanistic understanding of the processes involved and how they are regulated are required to improve the practical application of microorganisms in bioremediation. We used a combination of morphological (TEM) and analytical (XRD, XPS, FTIR) methods, together with novel proteomic analyses, to investigate the detoxification mechanisms, used by a range of bacteria, including the strains Bacillus velezensis LB002, Escherichia coli DH5α, B. subtilis 168, Pseudomonas putida KT2440, and B. licheniformis MT-1, exposed to elevated concentrations of Cd²⁺ and combinations of Cd²⁺, Pb²⁺, Cu²⁺, and Zn²⁺, in the presence and absence of added CaCl₂. Common features of detoxification included biomineralization, including the production of biological vaterite, up-regulation of proteins involved in flagellar movement and chemotaxis, biofilm synthesis, transmembrane transport of small molecules and organic matter decomposition. The putative roles of differentially expressed proteins in detoxification are discussed in relation to chemical and morphological data and together provide important tools to improve screening, selection, and practical application of bacterial isolates in bioremediation of polluted environments.

Continuous Systems Bioremediation of Wastewaters Loaded with Heavy Metals Using Microorganisms

Heavy metal pollution is a serious concern of the modern era due to its widespread negative effects on human health and to the environment. Conventional technologies applied for the uptake of this category of persistent pollutants are complex, often expensive, and inefficient at low metal concentrations. In the last few years, non-conventional alternatives have been studied in search of better solutions in terms of costs and sustainability. Microbial adsorbents are one of the biomass-based sorbents that have extensively demonstrated excellent heavy metals removal capacity even at low concentrations. However, most of the carried-out research regarding their application in wastewater treatment has been performed in discontinuous systems. The use of microorganisms for the uptake of metal ions in continuous systems could be an important step for the upscale of the remediation processes since it facilitates a faster remediation of higher quantities of wastewaters loaded with heavy metals, in comparison with batch systems removal. Thus, the current research aims to analyze the available studies focusing on the removal of metal ions from wastewaters using microorganisms, in continuous systems, with a focus on obtained performances, optimized experimental conditions, and the sustainability of the bioremoval process. The present work found that microbial-based remediation processes have demonstrated very good performances in continuous systems. Further sustainability analyses are required in order to apply the bioremediation technology in an optimized environmentally friendly way in large-scale facilities.

Tannery wastewater treatment coupled with bioenergy production in upflow microbial fuel cell under saline condition

Tannery industry handling huge amount of leather materials release immense amount of saline organic content wastewater. The present research was focused on the treatment of tannery industrial wastewater in UMFC (upflow microbial fuel cell) under saline condition (4%). The UMFC reactor was operated at different organic load (OL) such as 0.6, 1.2, 1.8 and 2.4 gCOD/L respectively. Total chemical oxygen demand (TCOD) removal at 0.6, 1.2, 1.8 gCOD/L was 87 ± 1.2%, 91 ± 1.2% and 93 ± 1.8% respectively. Soluble chemical oxygen demand (SCOD) removal in UMFC at 0.6, 1.2, 1.8 gCOD/L was 85 ± 0.6%, 88 ± 1.2% and 91 ± 1.8% respectively. Total suspended solids (TSS) removal was 49%, 78%, 81% at 0.6, 1.2, 1.8 gCOD/L OL in UMFC. Further, raise in OL to 2.4 gCOD/L showed decrease in TCOD, SCOD (80% and 72%) and TSS (60%) removal. Maximal power production of 854 mV with corresponding PD (power density) of 462 mW/m² and CD (current density) of 523 mA/m² was registered at 1.8 gCOD/L OL in UMFC. Increase in OL to 2.4 gCOD/L revealed decline in energy production to 810 mV with PD (385 mW/m²) and CD (438 mA/m²) in UMFC. Maximal bioaccumulation of chromium (95%) was recorded at 1.8 gCOD/L OL. Among different OL used 1.8 gCOD/L OL was optimum for the treatment of tannery wastewater and energy production. Bacterial community analysis in anode of UMFC revealed the dominance of promising electrogenic halophilic strains such as Ochrobactrum, Marinobacter, Rhodococcus and Bacillus in all the OL. Thus, the research clearly revealed the efficacy of halophilic consortium to treat the saline tannery wastewater coupled with bioenergy production in UMFC.

Mechanisms of chromium isotope fractionation and the applications in the environment

Chromium (Cr) is a toxic heavy metal that gives rise to environmental pollution and human risk. Chromium stable isotopes have a wide range of applications in both environmental field and earth science field. In this contribution, we focus on the application of the Cr isotope in both tracing pollution sources and monitoring Cr(Ⅵ) pollution. Meanwhile, we also provide a description of the main influencing factors controlling Cr isotope fractionation, chromium isotope analytical methods, and terrestrial Cr release. Chromium isotope tracing of contaminant sources is a new application method, it has a tremendous advantage in searching for the source of Cr pollution, which has not been covered in previous reviews. At the end of the article, the current status of Cr isotope applications in the paleo-environment is explained. Although there are still some uncertainties in practical applications, chromium isotope system shows great promise in the environmental aspects.

Bio-capture of Cr(VI) in a denitrification system: Electron competition, long-term performance, and microbial community evolution

Chromium is widely applied in industries as an important metal resource, but the discharge of Cr(VI) containing wastewater leads to the loss of chromium resources. This study proposed a bio-capture process of chromium in a denitrification system. The bio-capture potentiality was explored by investigating the electron competition between Cr(VI) and nitrogen compounds reduction, the long-term bio-capture performance, and the microbial community evolution. In the competition utilization of electron donors, both NO₃^--N and NO₂^--N took precedence over Cr(VI), and NO₂^--N reduction was proved to be the rate-limiting step. Under the optimum conditions of 20 mg/L NO₃^--N and 6 h HRT, 99.95% of 30 mg/L Cr(VI) could be reduced, and 220980 μg Cr/g MLSS was captured by the biofilm, which was fixed in intercellular as Cr(III). Microbiological analysis confirmed that the bio-reduction of Cr(VI) and NO₃^--N was mediated by synergistic interactions of a series of dominant bacteria, including genera Acidovorax, Thermomonas, and Microbacterium, which contained both the denitrification genes (narG, narZ, nxrA, and nirK) and chromate reduction genes (chrA and chrR). This study proved the feasibility of chromium bio-capture in denitrification systems and provided a new perspective for the Cr(VI) pollution treatment.

Bioremediation of hexavalent-chromium contaminated groundwater: Microcosm, column, and microbial diversity studies

Sulfate reducing bacteria (SRB) have the capability of bioreducing hexavalent chromium [Cr(VI)] to trivalent chromium [Cr(III)] under sulfate-reducing conditions for toxicity reduction. However, a high amount of sulfate addition would cause elevated sulfide production, which could inhibit the growth of SRB and result in reduced Cr(VI) bioreduction efficiency. A slow release reagent, viscous carbon and sulfate-releasing colloidal substrates (VCSRCS), was prepared for a long-lasting carbon and sulfate supplement. In the column study, VCSRCS was injected into the column system to form a VCSRCS biobarrier for Cr(VI) containment and bioreduction. A complete Cr(VI) removal was observed via the adsorption and bioreduction mechanisms in the column with VCSRCS addition. Results from X-ray diffractometer analyses indicate that Cr(OH)_3(s) and Cr₂O_3(s) were detected in precipitates, indicating the occurrence of Cr(VI) reduction followed by Cr(III) precipitation. Results from the Fourier-transform infrared spectroscopy analyses show that cell deposits carried functional groups, which could adsorb Cr. Addition of VCSRCS caused increased populations of total bacteria and dsrA, which also enhanced Cr(VI) reduction. Microbial diversity results indicate that VCSRCS addition resulted in the growth of Cr(VI)-reducing bacteria including Exiguobacterium, Citrobacter, Aerococcus, and SRB. Results of this study will be helpful in developing an effective and green VCSRCS biobarrier for the bioremediation of Cr(VI)-polluted groundwater.

Sustainable enhancement of Cr(VI) bioreduction by the isolated Cr(VI)-resistant bacteria

Bioreduction of mobile Cr(VI) to sparingly soluble Cr(III) is an effective strategy for in situ remediations of Cr contaminated sites. The key of this technology is to screen Cr(VI)-resistant bacteria and further explore the sustainable enhancement approaches towards their Cr(VI) reduction performance. In this study, a total of ten Cr(VI)-resistant bacteria were isolated from a Cr(VI) contaminated site. All of them could reduce Cr(VI), and the greatest extent of Cr(VI) reduction (98%) was obtained by the isolated CRB6 strain. The isolated CRB6 was able to reduce structural Fe(III) in Nontronite NAu-2 to structural Fe(II). Compared with the slow bioreduction process, the produced structural Fe(II) can rapidly enhance Cr(VI) reduction. The resist dissolution characteristics of NAu-2 in the redox cycling may provide sustainable enhancement of Cr(VI) reduction. However, no enhancement on Cr(VI) bioreduction by the isolated CRB6 was observed in the presence of NAu-2, which was attributed to the inhibition of Cr(VI) on the electron transfer between the isolated CRB6 and NAu-2. AQDS can accelerate the electron transfer between the isolated CRB6 and NAu-2 as an electron shuttle in the presence of Cr(VI). Therefore, the combination of NAu-2 and AQDS generated a synergistic enhancement on Cr(VI) bioreduction compared with the enhancement obtained by NAu-2 and AQDS individually. Our results highlight that structural Fe(III) and electron shuttle can provide a sustainable enhancement of Cr(VI) reduction by Cr(VI)-reducing bacteria, which has great potential for the effective Cr(VI) in-situ remediation.

Effects of chronic dietary hexavalent chromium on bioaccumulation and immune responses in the sea cucumber Apostichopus japonicus

Sea cucumbers Apostichopus japonicus (3.54 ± 0.01 g of wet weight) were exposed to five concentrations of dietary hexavalent chromium (Cr⁶⁺) [0 (control), 100, 200, 400, and 800 mg Cr⁶⁺/kg dry weight] amended with K₂Cr₂O₇ for 30 days. The bioaccumulation and immune responses [antioxidant enzymes: superoxide dismutase (SOD) and catalase (CAT); hydrolytic enzymes: acid phosphatase (ACP) and alkaline phosphatase (AKP)] of sea cucumbers were subsequently evaluated. This study found that the order of Cr accumulation in the experimental tissues was respiratory tree > intestine > body wall. Significantly lower SOD activities occurred in the 400 mg/kg group compared to that in the control group. Higher dietary Cr⁶⁺ exposure (400 and 800 mg Cr⁶⁺/kg dry weight) did not negatively alter the CAT activities, but significantly inhibited CAT activities in 100 mg/kg group, compared to control group. ACP activities in groups 200, 400 and 800 mg/kg were significantly lower than those in control group, while no significant differences occurred in AKP activities among groups. The present study provides important information into the bioaccumulation and immune responses of the sea cucumber A. japonicus in response to chronic dietary Cr⁶⁺ exposure.

Detoxification of Copper and Chromium via Dark Hydrogen Fermentation of Potato Waste by Clostridium butyricum Strain 92

The accumulation of various types of waste containing both organic and inorganic metal-containing compounds is extremely hazardous for living organisms. The possibility of polymer degradation, biohydrogen synthesis, and metal detoxification via the dark fermentation of model potato waste was investigated. For this purpose, the strict anaerobic strain was isolated and identified as Clostridium butyricum. The high efficiency of dark hydrogen fermentation of potatoes with yield of hydrogen in 85.8 ± 15.3 L kg−1 VSpotato was observed. The copperand chromium salts solutions were added to the culture fluid to obtain the concentrations of 50, 100, and 200 mg L−1 Cu(II) and Cr(VI) in the active phase of growth (19 h of cultivation). Metals at a concentration of 200 mg L−1 inhibited the fermentation process the most. The hydrogen yield decreased in 7.2 and 3.6 times to 11.9 ± 2.1 and 23.8 ± 5.6 L kg−1 VSpotato in the presence of 200 mg L−1 Cu(II) and Cr(VI), respectively. The efficiencies of the chromium bioremoval in all variants of the experiment were 100%, and those of copper bioremoval were about 90%. A pure culture of strict anaerobes Clostridium butyricum strain 92 was used for the first time for the detoxification of metals. The presented results confirmed the possibility of this promising strain application for industrial H2 production and the bioremediation of contaminated sites.

Characterization of biofilm formation and reduction of hexavalent chromium by bacteria isolated from tannery sludge

Biofilm formation ability of bacteria makes them potential in the field of tannery effluent treatment. However, the hazardous nature of effluent and environmental conditions may disturb the biofilm formation ability of bacteria which ultimately affects their effluent treatment efficiency. Accordingly, we isolated and characterized biofilm-forming bacteria Bacillus vallismortis (MT027009), Bacillus haynesii (MT027008), and Alcaligenes aquatilis (MT027005) from tannery sludge and examined them for biofilm formation under variable environmental conditions. Biofilm formation in tryptic soy broth (TSB) at different incubation times (24-120 h) revealed that the biofilm formation activity of the strain B. haynesii was not affected by incubation time, whereas the increase in biofilm formation was observed in the case of B. vallismortis (28 %) and A. aquatilis (52 %) after 48 h. The medium pH (pH 5.0-9.0) had a limited effect on biofilm formation except in the case of A. aquatilis at pH 5.0 (94 %) and pH 9.0 (80 %). Furthermore, compared to the controls (only TSB), the strains B. vallismortis, B. haynesii, and A. aquatilis showed enhanced biofilm formation in undiluted tannery effluent (28, 33, and 21 %) and 25 mg L^-1 Cr(VI) (23 %, 48 % 32 %). The biofilm structure was influenced by Cr(VI) as revealed by scanning electron microscopy (SEM) analysis. The results of Cr(VI) bioreduction studies suggest that bacterial biofilm (60-99 %) has a greater potential to remove Cr(VI) than planktonic cells (43-94 %). The results of the study provide important data on biofilm formation by indigenous bacteria in effluent environment conditions, making them potential isolates for tannery effluent treatment.

Application of microbial immobilization technology for remediation of Cr(VI) contamination: A review

The discharge of chromium (Cr) contaminated wastewater is creating a serious threat to aquatic environment due to the rapid pace in agricultural and industrial activities. Particularly, the long-term exposure of Cr(VI) polluted wastewater to the environment is causing serious harm to human health. Therefore, the treatment of Cr(VI) contaminated wastewater is demanding widespread attention. Regarding this, the bioremediation is being considered as a reliable and feasible option to handle Cr(VI) contaminated wastewater because of having low technical investment and operating costs. However, certain factors such as loss of microorganisms, toxicity to microorganisms and uneven microbial growth cycle in the presence of high concentrations of Cr(VI) are hindering its commercial applications. Regarding this, microbial immobilization technology (MIT) is getting great research interest because it could overcome the shortcomings of bioremediation technology's poor tolerance against Cr. Therefore, this review is the first attempt to emphases recent research developments in the remediation of Cr(VI) contamination via MIT. Starting from the selection of immobilized carrier, the present review is designed to critically discuss the various microbial immobilizing methods i.e., adsorption, embedding, covalent binding and medium interception. Further, the mechanism of Cr(VI) removal by immobilized microorganism has also been explored, precisely. In addition, three kinds of microorganism immobilization devices have been critically examined. Finally, knowledge gaps/key challenges and future perspectives are also discussed that would be helpful for the experts in improving MIT for the remediation of Cr(VI) contamination.

Coupled Mn(II) and Cr(III) Oxidation Mediated by Ascomycete Fungi

Manganese (Mn) oxides are considered as the primary oxidant of trivalent chromium [Cr(III)] in the environment. Microbial activities are responsible for the majority of Mn oxide formation in nature, thus likely influencing Cr(III) oxidation. Previous studies have been limited to Cr(III) oxidation by bacterial Mn oxides. Herein, we report coupled Mn(II) and Cr(III) oxidation in the presence of three Mn(II)-oxidizing Ascomycete fungi. In contrast to the previously reported inhibitory effect of Cr(III) on bacterial Mn(II) oxidation, varying effects of Cr(III) on fungal Mn(II) oxidation were observed, which may be linked to their Mn(II)-oxidation mechanisms. Under the concentrations of Mn(II) and Cr(III) applied in this study, Cr(III) promoted Mn(II) oxidation if it was mediated by hyphae-associated processes, but inhibited Mn(II) oxidation if it was achieved via extracellular enzymes/metabolites. The Cr(III) oxidation rate and extent were affected by Cr(III) speciation, Cr(VI) removal capacity (i.e., adsorption/reduction) of fungi, and organic content. The morphology and spatial relationship of Mn oxides with fungi varied, depending on fungal species and Cr(III) presence. Our findings highlight the importance of Mn(II)-oxidizing fungi in biogeochemical cycles of Mn and Cr and have significant implications for the origin of geogenic Cr(VI) and stability of reduced chromium in contaminated environments.